kernel/modsign-post-KS-jwb.patch
2012-10-15 09:42:26 -05:00

522 lines
15 KiB
Diff

From a6a74ede612b526dd0f958c2eee5adfa9b038b95 Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@redhat.com>
Date: Mon, 15 Oct 2012 10:14:09 -0400
Subject: [PATCH 1/2] Revert "MODSIGN: Sign modules during the build process"
This reverts commit 80d65e58e93ffdabf58202653a0435bd3cf2d82e.
---
scripts/Makefile.modpost | 77 +------------------------------
scripts/sign-file | 115 -----------------------------------------------
2 files changed, 1 insertion(+), 191 deletions(-)
delete mode 100644 scripts/sign-file
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 0020891..a1cb022 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -14,8 +14,7 @@
# 3) create one <module>.mod.c file pr. module
# 4) create one Module.symvers file with CRC for all exported symbols
# 5) compile all <module>.mod.c files
-# 6) final link of the module to a <module.ko> (or <module.unsigned>) file
-# 7) signs the modules to a <module.ko> file
+# 6) final link of the module to a <module.ko> file
# Step 3 is used to place certain information in the module's ELF
# section, including information such as:
@@ -33,8 +32,6 @@
# Step 4 is solely used to allow module versioning in external modules,
# where the CRC of each module is retrieved from the Module.symvers file.
-# Step 7 is dependent on CONFIG_MODULE_SIG being enabled.
-
# KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
# symbols in the final module linking stage
# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
@@ -119,7 +116,6 @@ $(modules:.ko=.mod.o): %.mod.o: %.mod.c FORCE
targets += $(modules:.ko=.mod.o)
# Step 6), final link of the modules
-ifneq ($(CONFIG_MODULE_SIG),y)
quiet_cmd_ld_ko_o = LD [M] $@
cmd_ld_ko_o = $(LD) -r $(LDFLAGS) \
$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
@@ -129,78 +125,7 @@ $(modules): %.ko :%.o %.mod.o FORCE
$(call if_changed,ld_ko_o)
targets += $(modules)
-else
-quiet_cmd_ld_ko_unsigned_o = LD [M] $@
- cmd_ld_ko_unsigned_o = \
- $(LD) -r $(LDFLAGS) \
- $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
- -o $@ $(filter-out FORCE,$^) \
- $(if $(AFTER_LINK),; $(AFTER_LINK))
-
-$(modules:.ko=.ko.unsigned): %.ko.unsigned :%.o %.mod.o FORCE
- $(call if_changed,ld_ko_unsigned_o)
-
-targets += $(modules:.ko=.ko.unsigned)
-
-# Step 7), sign the modules
-MODSECKEY = ./signing_key.priv
-MODPUBKEY = ./signing_key.x509
-
-ifeq ($(wildcard $(MODSECKEY))+$(wildcard $(MODPUBKEY)),$(MODSECKEY)+$(MODPUBKEY))
-ifeq ($(KBUILD_SRC),)
- # no O= is being used
- SCRIPTS_DIR := scripts
-else
- SCRIPTS_DIR := $(KBUILD_SRC)/scripts
-endif
-SIGN_MODULES := 1
-else
-SIGN_MODULES := 0
-endif
-
-# only sign if it's an in-tree module
-ifneq ($(KBUILD_EXTMOD),)
-SIGN_MODULES := 0
-endif
-# We strip the module as best we can - note that using both strip and eu-strip
-# results in a smaller module than using either alone.
-EU_STRIP = $(shell which eu-strip || echo true)
-
-quiet_cmd_sign_ko_stripped_ko_unsigned = STRIP [M] $@
- cmd_sign_ko_stripped_ko_unsigned = \
- cp $< $@ && \
- strip -x -g $@ && \
- $(EU_STRIP) $@
-
-ifeq ($(SIGN_MODULES),1)
-
-quiet_cmd_genkeyid = GENKEYID $@
- cmd_genkeyid = \
- perl $(SCRIPTS_DIR)/x509keyid $< $<.signer $<.keyid
-
-%.signer %.keyid: %
- $(call if_changed,genkeyid)
-
-KEYRING_DEP := $(MODSECKEY) $(MODPUBKEY) $(MODPUBKEY).signer $(MODPUBKEY).keyid
-quiet_cmd_sign_ko_ko_stripped = SIGN [M] $@
- cmd_sign_ko_ko_stripped = \
- sh $(SCRIPTS_DIR)/sign-file $(MODSECKEY) $(MODPUBKEY) $< $@
-else
-KEYRING_DEP :=
-quiet_cmd_sign_ko_ko_unsigned = NO SIGN [M] $@
- cmd_sign_ko_ko_unsigned = \
- cp $< $@
-endif
-
-$(modules): %.ko :%.ko.stripped $(KEYRING_DEP) FORCE
- $(call if_changed,sign_ko_ko_stripped)
-
-$(patsubst %.ko,%.ko.stripped,$(modules)): %.ko.stripped :%.ko.unsigned FORCE
- $(call if_changed,sign_ko_stripped_ko_unsigned)
-
-targets += $(modules)
-endif
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
diff --git a/scripts/sign-file b/scripts/sign-file
deleted file mode 100644
index e58e34e..0000000
--- a/scripts/sign-file
+++ /dev/null
@@ -1,115 +0,0 @@
-#!/bin/sh
-#
-# Sign a module file using the given key.
-#
-# Format: sign-file <key> <x509> <src-file> <dst-file>
-#
-
-scripts=`dirname $0`
-
-CONFIG_MODULE_SIG_SHA512=y
-if [ -r .config ]
-then
- . ./.config
-fi
-
-key="$1"
-x509="$2"
-src="$3"
-dst="$4"
-
-if [ ! -r "$key" ]
-then
- echo "Can't read private key" >&2
- exit 2
-fi
-
-if [ ! -r "$x509" ]
-then
- echo "Can't read X.509 certificate" >&2
- exit 2
-fi
-if [ ! -r "$x509.signer" ]
-then
- echo "Can't read Signer name" >&2
- exit 2;
-fi
-if [ ! -r "$x509.keyid" ]
-then
- echo "Can't read Key identifier" >&2
- exit 2;
-fi
-
-#
-# Signature parameters
-#
-algo=1 # Public-key crypto algorithm: RSA
-hash= # Digest algorithm
-id_type=1 # Identifier type: X.509
-
-#
-# Digest the data
-#
-dgst=
-if [ "$CONFIG_MODULE_SIG_SHA1" = "y" ]
-then
- prologue="0x30, 0x21, 0x30, 0x09, 0x06, 0x05, 0x2B, 0x0E, 0x03, 0x02, 0x1A, 0x05, 0x00, 0x04, 0x14"
- dgst=-sha1
- hash=2
-elif [ "$CONFIG_MODULE_SIG_SHA224" = "y" ]
-then
- prologue="0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04, 0x05, 0x00, 0x04, 0x1C"
- dgst=-sha224
- hash=7
-elif [ "$CONFIG_MODULE_SIG_SHA256" = "y" ]
-then
- prologue="0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20"
- dgst=-sha256
- hash=4
-elif [ "$CONFIG_MODULE_SIG_SHA384" = "y" ]
-then
- prologue="0x30, 0x41, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02, 0x05, 0x00, 0x04, 0x30"
- dgst=-sha384
- hash=5
-elif [ "$CONFIG_MODULE_SIG_SHA512" = "y" ]
-then
- prologue="0x30, 0x51, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03, 0x05, 0x00, 0x04, 0x40"
- dgst=-sha512
- hash=6
-else
- echo "$0: Can't determine hash algorithm" >&2
- exit 2
-fi
-
-(
-perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $?
-openssl dgst $dgst -binary $src || exit $?
-) >$src.dig || exit $?
-
-#
-# Generate the binary signature, which will be just the integer that comprises
-# the signature with no metadata attached.
-#
-openssl rsautl -sign -inkey $key -keyform PEM -in $src.dig -out $src.sig || exit $?
-signerlen=`stat -c %s $x509.signer`
-keyidlen=`stat -c %s $x509.keyid`
-siglen=`stat -c %s $src.sig`
-
-#
-# Build the signed binary
-#
-(
- cat $src || exit $?
- echo '~Module signature appended~' || exit $?
- cat $x509.signer $x509.keyid || exit $?
-
- # Preface each signature integer with a 2-byte BE length
- perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $?
- cat $src.sig || exit $?
-
- # Generate the information block
- perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $?
-) >$dst~ || exit $?
-
-# Permit in-place signing
-mv $dst~ $dst || exit $?
--
1.7.12.1
From b29453cb9b235041f789c81b1982179acb6d3d06 Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@redhat.com>
Date: Mon, 24 Sep 2012 10:46:36 -0400
Subject: [PATCH 2/2] MODSIGN: Add modules_sign make target
If CONFIG_MODULE_SIG is set, and 'make modules_sign' is called then this
patch will cause the modules to get a signature installed. The make target
is intended to be run after 'make modules_install', and will modify the
modules in-place in the installed location.
The signature will be appended to the module, along with some information
about the signature size and a magic string that indicates the presence of
the signature. This requires private and public keys to be available. By
default these are expected to be found in files:
signing_key.priv
signing_key.x509
in the base directory of the build. The first is the private key in PEM
form and the second is the X.509 certificate in DER form as can be generated
from openssl:
openssl req \
-new -x509 -outform PEM -out signing_key.x509 \
-keyout signing_key.priv -nodes \
-subj "/CN=H2G2/O=Magrathea/CN=Slartibartfast"
If the secret key is not found then signing will be skipped and the unsigned
module from (1) will just be copied to foo.ko.
If signing occurs, lines like the following will be seen:
SIGN [M] <install path>/fs/foo/foo.ko
will appear in the build log. If the signature step will be skipped and the
following will be seen:
NO SIGN [M] <install path>/fs/foo/foo.ko
NOTE! After the signature step, the signed module must not be passed through
strip. If you wish to strip or otherwise modify the kernel modules, use the
built-in stripping capabilities with 'make modules_install' or perform said
modifications before calling this make target. This restriction may affect
packaging tools (such as rpmbuild) and initramfs composition tools.
Based heavily on work by: David Howells <dhowells@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
---
Makefile | 6 +++
scripts/Makefile.modsign | 72 +++++++++++++++++++++++++++++
scripts/sign-file | 115 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 193 insertions(+)
create mode 100644 scripts/Makefile.modsign
create mode 100644 scripts/sign-file
diff --git a/Makefile b/Makefile
index 5be2ee8..618cfbbf 100644
--- a/Makefile
+++ b/Makefile
@@ -968,6 +968,12 @@ _modinst_post: _modinst_
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
$(call cmd,depmod)
+ifeq ($(CONFIG_MODULE_SIG), y)
+PHONY += modules_sign
+modules_sign:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
+endif
+
else # CONFIG_MODULES
# Modules not configured
diff --git a/scripts/Makefile.modsign b/scripts/Makefile.modsign
new file mode 100644
index 0000000..17326bc
--- /dev/null
+++ b/scripts/Makefile.modsign
@@ -0,0 +1,72 @@
+# ==========================================================================
+# Signing modules
+# ==========================================================================
+
+PHONY := __modsign
+__modsign:
+
+include scripts/Kbuild.include
+
+__modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
+modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
+
+PHONY += $(modules)
+__modsign: $(modules)
+ @:
+
+MODSECKEY = ./signing_key.priv
+MODPUBKEY = ./signing_key.x509
+
+ifeq ($(wildcard $(MODSECKEY))+$(wildcard $(MODPUBKEY)),$(MODSECKEY)+$(MODPUBKEY))
+ifeq ($(KBUILD_SRC),)
+ # no O= is being used
+ SCRIPTS_DIR := scripts
+else
+ SCRIPTS_DIR := $(KBUILD_SRC)/scripts
+endif
+SIGN_MODULES := 1
+else
+SIGN_MODULES := 0
+endif
+
+# only sign if it's an in-tree module
+ifneq ($(KBUILD_EXTMOD),)
+SIGN_MODULES := 0
+endif
+
+ifeq ($(SIGN_MODULES),1)
+
+quiet_cmd_genkeyid = GENKEYID $@
+ cmd_genkeyid = \
+ perl $(SCRIPTS_DIR)/x509keyid $< $<.signer $<.keyid
+
+%.signer %.keyid: %
+ $(call if_changed,genkeyid)
+
+KEYRING_DEP := $(MODSECKEY) $(MODPUBKEY) $(MODPUBKEY).signer $(MODPUBKEY).keyid
+quiet_cmd_sign_ko = SIGN [M] $(2)/$(notdir $@)
+ cmd_sign_ko = \
+ sh $(SCRIPTS_DIR)/sign-file $(MODSECKEY) $(MODPUBKEY) \
+ $(2)/$(notdir $@) $(2)/$(notdir $@).signed && \
+ mv $(2)/$(notdir $@).signed $(2)/$(notdir $@) && \
+ rm -rf $(2)/$(notdir $@).{dig,sig}
+else
+KEYRING_DEP :=
+quiet_cmd_sign_ko = NO SIGN [M] $@
+ cmd_sign_ko = \
+ true
+endif
+
+# Modules built outside the kernel source tree go into extra by default
+INSTALL_MOD_DIR ?= extra
+ext-mod-dir = $(INSTALL_MOD_DIR)$(subst $(patsubst %/,%,$(KBUILD_EXTMOD)),,$(@D))
+
+modinst_dir = $(if $(KBUILD_EXTMOD),$(ext-mod-dir),kernel/$(@D))
+
+$(modules): $(KEYRING_DEP)
+ $(call cmd,sign_ko,$(MODLIB)/$(modinst_dir))
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# # information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff --git a/scripts/sign-file b/scripts/sign-file
new file mode 100644
index 0000000..e58e34e
--- /dev/null
+++ b/scripts/sign-file
@@ -0,0 +1,115 @@
+#!/bin/sh
+#
+# Sign a module file using the given key.
+#
+# Format: sign-file <key> <x509> <src-file> <dst-file>
+#
+
+scripts=`dirname $0`
+
+CONFIG_MODULE_SIG_SHA512=y
+if [ -r .config ]
+then
+ . ./.config
+fi
+
+key="$1"
+x509="$2"
+src="$3"
+dst="$4"
+
+if [ ! -r "$key" ]
+then
+ echo "Can't read private key" >&2
+ exit 2
+fi
+
+if [ ! -r "$x509" ]
+then
+ echo "Can't read X.509 certificate" >&2
+ exit 2
+fi
+if [ ! -r "$x509.signer" ]
+then
+ echo "Can't read Signer name" >&2
+ exit 2;
+fi
+if [ ! -r "$x509.keyid" ]
+then
+ echo "Can't read Key identifier" >&2
+ exit 2;
+fi
+
+#
+# Signature parameters
+#
+algo=1 # Public-key crypto algorithm: RSA
+hash= # Digest algorithm
+id_type=1 # Identifier type: X.509
+
+#
+# Digest the data
+#
+dgst=
+if [ "$CONFIG_MODULE_SIG_SHA1" = "y" ]
+then
+ prologue="0x30, 0x21, 0x30, 0x09, 0x06, 0x05, 0x2B, 0x0E, 0x03, 0x02, 0x1A, 0x05, 0x00, 0x04, 0x14"
+ dgst=-sha1
+ hash=2
+elif [ "$CONFIG_MODULE_SIG_SHA224" = "y" ]
+then
+ prologue="0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04, 0x05, 0x00, 0x04, 0x1C"
+ dgst=-sha224
+ hash=7
+elif [ "$CONFIG_MODULE_SIG_SHA256" = "y" ]
+then
+ prologue="0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20"
+ dgst=-sha256
+ hash=4
+elif [ "$CONFIG_MODULE_SIG_SHA384" = "y" ]
+then
+ prologue="0x30, 0x41, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02, 0x05, 0x00, 0x04, 0x30"
+ dgst=-sha384
+ hash=5
+elif [ "$CONFIG_MODULE_SIG_SHA512" = "y" ]
+then
+ prologue="0x30, 0x51, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03, 0x05, 0x00, 0x04, 0x40"
+ dgst=-sha512
+ hash=6
+else
+ echo "$0: Can't determine hash algorithm" >&2
+ exit 2
+fi
+
+(
+perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $?
+openssl dgst $dgst -binary $src || exit $?
+) >$src.dig || exit $?
+
+#
+# Generate the binary signature, which will be just the integer that comprises
+# the signature with no metadata attached.
+#
+openssl rsautl -sign -inkey $key -keyform PEM -in $src.dig -out $src.sig || exit $?
+signerlen=`stat -c %s $x509.signer`
+keyidlen=`stat -c %s $x509.keyid`
+siglen=`stat -c %s $src.sig`
+
+#
+# Build the signed binary
+#
+(
+ cat $src || exit $?
+ echo '~Module signature appended~' || exit $?
+ cat $x509.signer $x509.keyid || exit $?
+
+ # Preface each signature integer with a 2-byte BE length
+ perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $?
+ cat $src.sig || exit $?
+
+ # Generate the information block
+ perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $?
+) >$dst~ || exit $?
+
+# Permit in-place signing
+mv $dst~ $dst || exit $?
--
1.7.12.1