rpms/kernel
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
227db8a8ef
kernel/0001-mm-CONFIG_NR_ZONES_EXTENDED.patch
Laura Abbott b71532b6ec Re-enable ZONE_DMA (rhbz 1309658)
2016-02-25 17:41:35 -08:00

174 lines
6.5 KiB
Diff
Raw Blame History

From 8b368e8e961944105945fbe36f3f264252bfd19a Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 25 Feb 2016 01:02:30 +0000
Subject: [PATCH] mm: CONFIG_NR_ZONES_EXTENDED
ZONE_DEVICE (merged in 4.3) and ZONE_CMA (proposed) are examples of new mm
zones that are bumping up against the current maximum limit of 4 zones,
i.e. 2 bits in page->flags. When adding a zone this equation still needs
to be satisified:
SECTIONS_WIDTH + ZONES_WIDTH + NODES_SHIFT + LAST_CPUPID_SHIFT
<= BITS_PER_LONG - NR_PAGEFLAGS
ZONE_DEVICE currently tries to satisfy this equation by requiring that
ZONE_DMA be disabled, but this is untenable given generic kernels want to
support ZONE_DEVICE and ZONE_DMA simultaneously. ZONE_CMA would like to
increase the amount of memory covered per section, but that limits the
minimum granularity at which consecutive memory ranges can be added via
devm_memremap_pages().
The trade-off of what is acceptable to sacrifice depends heavily on the
platform. For example, ZONE_CMA is targeted for 32-bit platforms where
page->flags is constrained, but those platforms likely do not care about
the minimum granularity of memory hotplug. A big iron machine with 1024
numa nodes can likely sacrifice ZONE_DMA where a general purpose
distribution kernel can not.
CONFIG_NR_ZONES_EXTENDED is a configuration symbol that gets selected when
the number of configured zones exceeds 4. It documents the configuration
symbols and definitions that get modified when ZONES_WIDTH is greater than
2.
For now, it steals a bit from NODES_SHIFT. Later on it can be used to
document the definitions that get modified when a 32-bit configuration
wants more zone bits.
Note that GFP_ZONE_TABLE poses an interesting constraint since
include/linux/gfp.h gets included by the 32-bit portion of a 64-bit build.
We need to be careful to only build the table for zones that have a
corresponding gfp_t flag. GFP_ZONES_SHIFT is introduced for this purpose.
This patch does not attempt to solve the problem of adding a new zone
that also has a corresponding GFP_ flag.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=110931
Fixes: 033fbae988fc ("mm: ZONE_DEVICE for "device memory"")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Mark <markk@clara.co.uk>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/Kconfig | 6 ++++--
include/linux/gfp.h | 33 ++++++++++++++++++++-------------
include/linux/page-flags-layout.h | 2 ++
mm/Kconfig | 7 +++++--
4 files changed, 31 insertions(+), 17 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3fef519..b94704a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1409,8 +1409,10 @@ config NUMA_EMU
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
- range 1 10
- default "10" if MAXSMP
+ range 1 10 if !NR_ZONES_EXTENDED
+ range 1 9 if NR_ZONES_EXTENDED
+ default "10" if MAXSMP && !NR_ZONES_EXTENDED
+ default "9" if MAXSMP && NR_ZONES_EXTENDED
default "6" if X86_64
default "3"
depends on NEED_MULTIPLE_NODES
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index af1f2b2..d201d8a 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -329,22 +329,29 @@ static inline bool gfpflags_allow_blocking(const gfp_t gfp_flags)
* 0xe => BAD (MOVABLE+DMA32+HIGHMEM)
* 0xf => BAD (MOVABLE+DMA32+HIGHMEM+DMA)
*
- * ZONES_SHIFT must be <= 2 on 32 bit platforms.
+ * GFP_ZONES_SHIFT must be <= 2 on 32 bit platforms.
*/
-#if 16 * ZONES_SHIFT > BITS_PER_LONG
-#error ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
+#if defined(CONFIG_ZONE_DEVICE) && (MAX_NR_ZONES-1) <= 4
+/* ZONE_DEVICE is not a valid GFP zone specifier */
+#define GFP_ZONES_SHIFT 2
+#else
+#define GFP_ZONES_SHIFT ZONES_SHIFT
+#endif
+
+#if 16 * GFP_ZONES_SHIFT > BITS_PER_LONG
+#error GFP_ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
#endif
#define GFP_ZONE_TABLE ( \
- (ZONE_NORMAL << 0 * ZONES_SHIFT) \
- | (OPT_ZONE_DMA << ___GFP_DMA * ZONES_SHIFT) \
- | (OPT_ZONE_HIGHMEM << ___GFP_HIGHMEM * ZONES_SHIFT) \
- | (OPT_ZONE_DMA32 << ___GFP_DMA32 * ZONES_SHIFT) \
- | (ZONE_NORMAL << ___GFP_MOVABLE * ZONES_SHIFT) \
- | (OPT_ZONE_DMA << (___GFP_MOVABLE | ___GFP_DMA) * ZONES_SHIFT) \
- | (ZONE_MOVABLE << (___GFP_MOVABLE | ___GFP_HIGHMEM) * ZONES_SHIFT) \
- | (OPT_ZONE_DMA32 << (___GFP_MOVABLE | ___GFP_DMA32) * ZONES_SHIFT) \
+ (ZONE_NORMAL << 0 * GFP_ZONES_SHIFT) \
+ | (OPT_ZONE_DMA << ___GFP_DMA * GFP_ZONES_SHIFT) \
+ | (OPT_ZONE_HIGHMEM << ___GFP_HIGHMEM * GFP_ZONES_SHIFT) \
+ | (OPT_ZONE_DMA32 << ___GFP_DMA32 * GFP_ZONES_SHIFT) \
+ | (ZONE_NORMAL << ___GFP_MOVABLE * GFP_ZONES_SHIFT) \
+ | (OPT_ZONE_DMA << (___GFP_MOVABLE | ___GFP_DMA) * GFP_ZONES_SHIFT) \
+ | (ZONE_MOVABLE << (___GFP_MOVABLE | ___GFP_HIGHMEM) * GFP_ZONES_SHIFT) \
+ | (OPT_ZONE_DMA32 << (___GFP_MOVABLE | ___GFP_DMA32) * GFP_ZONES_SHIFT) \
)
/*
@@ -369,8 +376,8 @@ static inline enum zone_type gfp_zone(gfp_t flags)
enum zone_type z;
int bit = (__force int) (flags & GFP_ZONEMASK);
- z = (GFP_ZONE_TABLE >> (bit * ZONES_SHIFT)) &
- ((1 << ZONES_SHIFT) - 1);
+ z = (GFP_ZONE_TABLE >> (bit * GFP_ZONES_SHIFT)) &
+ ((1 << GFP_ZONES_SHIFT) - 1);
VM_BUG_ON((GFP_ZONE_BAD >> bit) & 1);
return z;
}
diff --git a/include/linux/page-flags-layout.h b/include/linux/page-flags-layout.h
index da52366..77b078c 100644
--- a/include/linux/page-flags-layout.h
+++ b/include/linux/page-flags-layout.h
@@ -17,6 +17,8 @@
#define ZONES_SHIFT 1
#elif MAX_NR_ZONES <= 4
#define ZONES_SHIFT 2
+#elif MAX_NR_ZONES <= 8
+#define ZONES_SHIFT 3
#else
#error ZONES_SHIFT -- too many zones configured adjust calculation
#endif
diff --git a/mm/Kconfig b/mm/Kconfig
index 031a329..7826216 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -652,8 +652,6 @@ config IDLE_PAGE_TRACKING
config ZONE_DEVICE
bool "Device memory (pmem, etc...) hotplug support"
- default !ZONE_DMA
- depends on !ZONE_DMA
depends on MEMORY_HOTPLUG
depends on MEMORY_HOTREMOVE
depends on X86_64 #arch_add_memory() comprehends device memory
@@ -667,5 +665,10 @@ config ZONE_DEVICE
If FS_DAX is enabled, then say Y.
+config NR_ZONES_EXTENDED
+ bool
+ default n if !64BIT
+ default y if ZONE_DEVICE && ZONE_DMA && ZONE_DMA32
+
config FRAME_VECTOR
bool
--
2.5.0
Reference in New Issue View Git Blame Copy Permalink