kernel/kernel.spec
Justin M. Forbes 0c347acd30
kernel-5.15.17-0
* Thu Jan 27 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.17-0]
- Revert "PCI/MSI: Mask MSI-X vectors only on success" (Justin M. Forbes)
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
2022-01-27 10:03:08 -06:00

3154 lines
111 KiB
RPMSpec
Executable File

# All Global changes to build and install go here.
# Per the below section about __spec_install_pre, any rpm
# environment changes that affect %%install need to go
# here before the %%install macro is pre-built.
# Include Fedora files
%global include_fedora 1
# Include RHEL files
%global include_rhel 1
# Disable LTO in userspace packages.
%global _lto_cflags %{nil}
# Option to enable compiling with clang instead of gcc.
%bcond_with toolchain_clang
%if %{with toolchain_clang}
%global toolchain clang
%endif
# Compile the kernel with LTO (only supported when building with clang).
%bcond_with clang_lto
%if %{with clang_lto} && %{without toolchain_clang}
{error:clang_lto requires --with toolchain_clang}
%endif
# Cross compile on copr for arm
# See https://bugzilla.redhat.com/1879599
%if 0%{?_with_cross_arm:1}
%global _target_cpu armv7hl
%global _arch arm
%global _build_arch arm
%global _with_cross 1
%endif
# The kernel's %%install section is special
# Normally the %%install section starts by cleaning up the BUILD_ROOT
# like so:
#
# %%__spec_install_pre %%{___build_pre}\
# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
# mkdir "$RPM_BUILD_ROOT"\
# %%{nil}
#
# But because of kernel variants, the %%build section, specifically
# BuildKernel(), moves each variant to its final destination as the
# variant is built. This violates the expectation of the %%install
# section. As a result we snapshot the current env variables and
# purposely leave out the removal section. All global wide changes
# should be added above this line otherwise the %%install section
# will not see them.
%global __spec_install_pre %{___build_pre}
# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
# compression for rpms (xz, level 2).
# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
# to compress by single-threaded xz. Switch to threaded compression,
# and from level 2 to 3 to keep compressed sizes close to "w2" results.
#
# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
# this one might need tweaking (e.g. if default changes to w3.xzdio,
# change below to w4T.xzdio):
#
# This is disabled on i686 as it triggers oom errors
%ifnarch i686
%define _binary_payload w3T.xzdio
%endif
Summary: The Linux kernel
# Set released_kernel to 1 when the upstream source tarball contains a
# kernel release. (This includes prepatch or "rc" releases.)
# Set released_kernel to 0 when the upstream source tarball contains an
# unreleased kernel development snapshot.
%global released_kernel 1
# Set debugbuildsenabled to 1 to build separate base and debug kernels
# (on supported architectures). The kernel-debug-* subpackages will
# contain the debug kernel.
# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
# to build the base kernel using the debug configuration. (Specifying
# the --with-release option overrides this setting.)
%define debugbuildsenabled 1
%global distro_build 200
%if 0%{?fedora}
%define secure_boot_arch x86_64
%else
%define secure_boot_arch x86_64 aarch64 s390x ppc64le
%endif
# Signing for secure boot authentication
%ifarch %{secure_boot_arch}
%global signkernel 1
%else
%global signkernel 0
%endif
# Sign modules on all arches
%global signmodules 1
# Compress modules only for architectures that build modules
%ifarch noarch
%global zipmodules 0
%else
%global zipmodules 1
%endif
%if %{zipmodules}
%global zipsed -e 's/\.ko$/\.ko.xz/'
# for parallel xz processes, replace with 1 to go back to single process
%global zcpu `nproc --all`
%endif
# define buildid .local
%if 0%{?fedora}
%define primary_target fedora
%else
%define primary_target rhel
%endif
# The kernel tarball/base version
%define kversion 5.15
%define rpmversion 5.15.17
%define patchversion 5.15
%define pkgrelease 200
# This is needed to do merge window version magic
%define patchlevel 15
# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 200%{?buildid}%{?dist}
%define pkg_release %{specrelease}
# libexec dir is not used by the linker, so the shared object there
# should not be exported to RPM provides
%global __provides_exclude_from ^%{_libexecdir}/kselftests
# The following build options are enabled by default, but may become disabled
# by later architecture-specific checks. These can also be disabled by using
# --without <opt> in the rpmbuild command, or by forcing these values to 0.
#
# standard kernel
%define with_up %{?_without_up: 0} %{?!_without_up: 1}
# kernel PAE (only valid for ARM (lpae))
%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
# kernel-debug
%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
# kernel-zfcpdump (s390 specific kernel for zfcpdump)
%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
# kernel-doc
%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
# kernel-headers
%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
# perf
%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
# tools
%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
# bpf tool
%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
# kernel-debuginfo
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
# kernel-abi-stablelists
%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
# internal samples and selftests
%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
#
# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
# Only build the pae kernel (--with paeonly):
%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
# Control whether we perform a compat. check against published ABI.
%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
# Temporarily disable kabi checks until RC.
%define with_kabichk 0
# Control whether we perform a compat. check against DUP ABI.
%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
#
# Control whether to run an extensive DWARF based kABI check.
# Note that this option needs to have baseline setup in SOURCE300.
%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
#
# Control whether to install the vdso directories.
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
#
# should we do C=1 builds with sparse
%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
#
# Cross compile requested?
%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
#
# build a release kernel on rawhide
%define with_release %{?_with_release: 1} %{?!_with_release: 0}
# verbose build, i.e. no silent rules and V=1
%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
#
# check for mismatched config options
%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
#
# gcov support
%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
#
# ipa_clone support
%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
%if 0%{?fedora}
# Kernel headers are being split out into a separate package
%define with_headers 0
%define with_cross_headers 0
# no ipa_clone for now
%define with_ipaclones 0
# no stablelist
%define with_kernel_abi_stablelists 0
# Fedora builds these separately
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
# selftests turns on bpftool
%define with_selftests 0
%endif
%if %{with_verbose}
%define make_opts V=1
%else
%define make_opts -s
%endif
%if %{with toolchain_clang}
%ifarch s390x ppc64le
%global llvm_ias 0
%else
%global llvm_ias 1
%endif
%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
%if %{with clang_lto}
%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
%endif
%global make_opts %{make_opts} %{clang_make_opts}
# clang does not support the -fdump-ipa-clones option
%global with_ipaclones 0
%endif
# turn off debug kernel and kabichk for gcov builds
%if %{with_gcov}
%define with_debug 0
%define with_kabichk 0
%define with_kabidupchk 0
%define with_kabidwchk 0
%define with_kabidw_base 0
%define with_kernel_abi_stablelists 0
%endif
# turn off kABI DWARF-based check if we're generating the base dataset
%if %{with_kabidw_base}
%define with_kabidwchk 0
%endif
# kpatch_kcflags are extra compiler flags applied to base kernel
# -fdump-ipa-clones is enabled only for base kernels on selected arches
%if %{with_ipaclones}
%ifarch x86_64 ppc64le
%define kpatch_kcflags -fdump-ipa-clones
%else
%define with_ipaclones 0
%endif
%endif
%define make_target bzImage
%define image_install_path boot
%define KVERREL %{version}-%{release}.%{_target_cpu}
%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
%define hdrarch %_target_cpu
%define asmarch %_target_cpu
%if 0%{!?nopatches:1}
%define nopatches 0
%endif
%if %{with_vanilla}
%define nopatches 1
%endif
%if %{with_release}
%define debugbuildsenabled 1
%endif
%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug
# Needed because we override almost everything involving build-ids
# and debuginfo generation. Currently we rely on the old alldebug setting.
%global _build_id_links alldebug
# kernel PAE is only built on ARMv7
%ifnarch armv7hl
%define with_pae 0
%endif
# if requested, only build base kernel
%if %{with_baseonly}
%define with_pae 0
%define with_debug 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif
# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
%define with_debug 0
%endif
# if requested, only build debug kernel
%if %{with_dbgonly}
%define with_up 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif
# turn off kABI DUP check and DWARF-based check if kABI check is disabled
%if !%{with_kabichk}
%define with_kabidupchk 0
%define with_kabidwchk 0
%endif
%if %{with_vdso_install}
%define use_vdso 1
%endif
# selftests require bpftool to be built
%if %{with_selftests}
%define with_bpftool 1
%endif
%ifnarch noarch
%define with_kernel_abi_stablelists 0
%endif
# Overrides for generic default options
# only package docs noarch
%ifnarch noarch
%define with_doc 0
%define doc_build_fail true
%endif
%if 0%{?fedora}
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif
%endif
# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_headers 0
%define with_cross_headers 0
%define with_tools 0
%define with_perf 0
%define with_bpftool 0
%define with_selftests 0
%define with_debug 0
%define all_arch_configs kernel-%{version}-*.config
%endif
# sparse blows up on ppc
%ifnarch ppc64le
%define with_sparse 0
%endif
# zfcpdump mechanism is s390 only
%ifnarch s390x
%define with_zfcpdump 0
%endif
%if 0%{?fedora}
# This is not for Fedora
%define with_zfcpdump 0
%endif
# Per-arch tweaks
%ifarch i686
%define asmarch x86
%define hdrarch i386
%define all_arch_configs kernel-%{version}-i?86*.config
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch ppc64le
%define asmarch powerpc
%define hdrarch powerpc
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%define use_vdso 0
%define all_arch_configs kernel-%{version}-ppc64le*.config
%endif
%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
%define kernel_image arch/s390/boot/bzImage
%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
%endif
%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
%define skip_nonpae_vdso 1
%define asmarch arm
%define hdrarch arm
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
%define kernel_mflags KALLSYMS_EXTRA_PASS=1
# we only build headers/perf/tools on the base arm arches
# just like we used to only build them on i386 for x86
%ifnarch armv7hl
%define with_headers 0
%define with_cross_headers 0
%endif
# These currently don't compile on armv7
%define with_selftests 0
%endif
%ifarch aarch64
%define all_arch_configs kernel-%{version}-aarch64*.config
%define asmarch arm64
%define hdrarch arm64
%define make_target Image.gz
%define kernel_image arch/arm64/boot/Image.gz
%endif
# Should make listnewconfig fail if there's config options
# printed out?
%if %{nopatches}
%define with_configchecks 0
%endif
# To temporarily exclude an architecture from being built, add it to
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).
# We only build kernel-headers on the following...
%if 0%{?fedora}
%define nobuildarches i386
%else
%define nobuildarches i386 i686 %{arm}
%endif
%ifarch %nobuildarches
# disable BuildKernel commands
%define with_up 0
%define with_debug 0
%define with_pae 0
%define with_zfcpdump 0
%define with_debuginfo 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_selftests 0
%define _enable_debug_packages 0
%endif
# Architectures we build tools/cpupower on
%if 0%{?fedora}
%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
%else
%define cpupowerarchs i686 x86_64 ppc64le aarch64
%endif
%if 0%{?use_vdso}
%if 0%{?skip_nonpae_vdso}
%define _use_vdso 0
%else
%define _use_vdso 1
%endif
%else
%define _use_vdso 0
%endif
# If build of debug packages is disabled, we need to know if we want to create
# meta debug packages or not, after we define with_debug for all specific cases
# above. So this must be at the end here, after all cases of with_debug or not.
%define with_debug_meta 0
%if !%{debugbuildsenabled}
%if %{with_debug}
%define with_debug_meta 1
%endif
%define with_debug 0
%endif
#
# Packages that need to be installed before the kernel is, because the %%post
# scripts use them.
#
%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
%define initrd_prereq dracut >= 027
Name: kernel
License: GPLv2 and Redistributable, no modification permitted
URL: https://www.kernel.org/
Version: %{rpmversion}
Release: %{pkg_release}
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
%if 0%{?fedora}
ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
%else
ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
%endif
ExclusiveOS: Linux
%ifnarch %{nobuildarches}
Requires: kernel-core-uname-r = %{KVERREL}
Requires: kernel-modules-uname-r = %{KVERREL}
%endif
#
# List the packages used during the kernel build
#
BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
BuildRequires: net-tools, hostname, bc, elfutils-devel
BuildRequires: dwarves
BuildRequires: python3-devel
BuildRequires: gcc-plugin-devel
%ifnarch %{nobuildarches} noarch
BuildRequires: bpftool
%endif
%if %{with_headers}
BuildRequires: rsync
%endif
%if %{with_doc}
BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
%endif
%if %{with_sparse}
BuildRequires: sparse
%endif
%if %{with_perf}
BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
BuildRequires: audit-libs-devel
BuildRequires: java-devel
BuildRequires: libbpf-devel
BuildRequires: libbabeltrace-devel
BuildRequires: libtraceevent-devel
%ifnarch %{arm} s390x
BuildRequires: numactl-devel
%endif
%ifarch aarch64
BuildRequires: opencsd-devel >= 1.0.0
%endif
%endif
%if %{with_tools}
BuildRequires: gettext ncurses-devel
BuildRequires: libcap-devel libcap-ng-devel
%ifnarch s390x
BuildRequires: pciutils-devel
%endif
%endif
%if %{with_bpftool}
BuildRequires: python3-docutils
BuildRequires: zlib-devel binutils-devel
%endif
%if %{with_selftests}
BuildRequires: clang llvm
%ifnarch %{arm}
BuildRequires: numactl-devel
%endif
BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
BuildRequires: rpm-build, elfutils
BuildConflicts: rpm < 4.13.0.1-19
BuildConflicts: dwarves < 1.13
# Most of these should be enabled after more investigation
%undefine _include_minidebuginfo
%undefine _find_debuginfo_dwz_opts
%undefine _unique_build_ids
%undefine _unique_debug_names
%undefine _unique_debug_srcs
%undefine _debugsource_packages
%undefine _debuginfo_subpackages
%global _find_debuginfo_opts -r
%global _missing_build_ids_terminate_build 1
%global _no_recompute_build_ids 1
%endif
%if %{with_kabidwchk} || %{with_kabidw_base}
BuildRequires: kabi-dw
%endif
%if %{signkernel}%{signmodules}
BuildRequires: openssl openssl-devel
%if %{signkernel}
%ifarch x86_64 aarch64
BuildRequires: nss-tools
BuildRequires: pesign >= 0.10-4
%endif
%endif
%endif
%if %{with_cross}
BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
%define __strip %{_build_arch}-linux-gnu-strip
%endif
# These below are required to build man pages
%if %{with_perf}
BuildRequires: xmlto
%endif
%if %{with_perf} || %{with_tools}
BuildRequires: asciidoc
%endif
%if %{with toolchain_clang}
BuildRequires: clang
%endif
%if %{with clang_lto}
BuildRequires: llvm
BuildRequires: lld
%endif
# Because this is the kernel, it's hard to get a single upstream URL
# to represent the base without needing to do a bunch of patching. This
# tarball is generated from a src-git tree. If you want to see the
# exact git commit you can run
#
# xzcat -qq ${TARBALL} | git get-tar-commit-id
Source0: linux-5.15.17.tar.xz
Source1: Makefile.rhelver
# Name of the packaged file containing signing key
%ifarch ppc64le
%define signing_key_filename kernel-signing-ppc.cer
%endif
%ifarch s390x
%define signing_key_filename kernel-signing-s390.cer
%endif
%if %{?released_kernel}
Source10: redhatsecurebootca5.cer
Source11: redhatsecurebootca1.cer
Source12: redhatsecureboot501.cer
Source13: redhatsecureboot301.cer
Source14: secureboot_s390.cer
Source15: secureboot_ppc.cer
%define secureboot_ca_1 %{SOURCE10}
%define secureboot_ca_0 %{SOURCE11}
%ifarch x86_64 aarch64
%define secureboot_key_1 %{SOURCE12}
%define pesign_name_1 redhatsecureboot501
%define secureboot_key_0 %{SOURCE13}
%define pesign_name_0 redhatsecureboot301
%endif
%ifarch s390x
%define secureboot_key_0 %{SOURCE14}
%define pesign_name_0 redhatsecureboot302
%endif
%ifarch ppc64le
%define secureboot_key_0 %{SOURCE15}
%define pesign_name_0 redhatsecureboot303
%endif
# released_kernel
%else
Source10: redhatsecurebootca4.cer
Source11: redhatsecurebootca2.cer
Source12: redhatsecureboot401.cer
Source13: redhatsecureboot003.cer
%define secureboot_ca_1 %{SOURCE10}
%define secureboot_ca_0 %{SOURCE11}
%define secureboot_key_1 %{SOURCE12}
%define pesign_name_1 redhatsecureboot401
%define secureboot_key_0 %{SOURCE13}
%define pesign_name_0 redhatsecureboot003
# released_kernel
%endif
Source20: mod-denylist.sh
Source21: mod-sign.sh
Source22: parallel_xz.sh
%define modsign_cmd %{SOURCE21}
%if 0%{?include_rhel}
Source23: x509.genkey.rhel
Source24: kernel-aarch64-rhel.config
Source25: kernel-aarch64-debug-rhel.config
Source26: mod-extra.list.rhel
Source27: kernel-ppc64le-rhel.config
Source28: kernel-ppc64le-debug-rhel.config
Source29: kernel-s390x-rhel.config
Source30: kernel-s390x-debug-rhel.config
Source31: kernel-s390x-zfcpdump-rhel.config
Source32: kernel-x86_64-rhel.config
Source33: kernel-x86_64-debug-rhel.config
Source34: filter-x86_64.sh.rhel
Source35: filter-armv7hl.sh.rhel
Source36: filter-i686.sh.rhel
Source37: filter-aarch64.sh.rhel
Source38: filter-ppc64le.sh.rhel
Source39: filter-s390x.sh.rhel
Source40: filter-modules.sh.rhel
%endif
%if 0%{?include_fedora}
Source50: x509.genkey.fedora
Source51: mod-extra.list.fedora
Source52: kernel-aarch64-fedora.config
Source53: kernel-aarch64-debug-fedora.config
Source54: kernel-armv7hl-fedora.config
Source55: kernel-armv7hl-debug-fedora.config
Source56: kernel-armv7hl-lpae-fedora.config
Source57: kernel-armv7hl-lpae-debug-fedora.config
Source58: kernel-i686-fedora.config
Source59: kernel-i686-debug-fedora.config
Source60: kernel-ppc64le-fedora.config
Source61: kernel-ppc64le-debug-fedora.config
Source62: kernel-s390x-fedora.config
Source63: kernel-s390x-debug-fedora.config
Source64: kernel-x86_64-fedora.config
Source65: kernel-x86_64-debug-fedora.config
Source67: filter-x86_64.sh.fedora
Source68: filter-armv7hl.sh.fedora
Source69: filter-i686.sh.fedora
Source70: filter-aarch64.sh.fedora
Source71: filter-ppc64le.sh.fedora
Source72: filter-s390x.sh.fedora
Source73: filter-modules.sh.fedora
%endif
Source75: partial-kgcov-snip.config
Source80: generate_all_configs.sh
Source81: process_configs.sh
Source82: update_scripts.sh
Source83: generate_crashkernel_default.sh
Source84: mod-internal.list
Source100: rheldup3.x509
Source101: rhelkpatch1.x509
Source200: check-kabi
Source201: Module.kabi_aarch64
Source202: Module.kabi_ppc64le
Source203: Module.kabi_s390x
Source204: Module.kabi_x86_64
Source210: Module.kabi_dup_aarch64
Source211: Module.kabi_dup_ppc64le
Source212: Module.kabi_dup_s390x
Source213: Module.kabi_dup_x86_64
Source300: kernel-abi-stablelists-%{rpmversion}-%{distro_build}.tar.bz2
Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2
# Sources for kernel-tools
Source2000: cpupower.service
Source2001: cpupower.config
Source2002: kvm_stat.logrotate
# Some people enjoy building customized kernels from the dist-git in Fedora and
# use this to override configuration options. One day they may all use the
# source tree, but in the mean time we carry this to support the legacy workflow
Source3000: merge.pl
Source3001: kernel-local
Source3003: Patchlist.changelog
Source4000: README.rst
Source4001: rpminspect.yaml
Source4002: gating.yaml
## Patches needed for building this package
%if !%{nopatches}
Patch1: patch-%{patchversion}-redhat.patch
%endif
# empty final patch to facilitate testing of kernel patches
Patch999999: linux-kernel-test.patch
# END OF PATCH DEFINITIONS
%description
The kernel meta package
#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
# %%kernel_reqprovconf <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf \
Provides: kernel = %{rpmversion}-%{pkg_release}\
Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\
Provides: kernel-drm-nouveau = 16\
Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\
Requires(preun): systemd >= 200\
Conflicts: xfsprogs < 4.3.0-1\
Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
AutoReq: no\
AutoProv: yes\
%{nil}
%package doc
Summary: Various documentation bits found in the kernel source
Group: Documentation
%description doc
This package contains documentation files from the kernel
source. Various bits of information about the Linux kernel and the
device drivers shipped with it are documented in these files.
You'll want to install this package if you need a reference to the
options that can be passed to Linux kernel modules at load time.
%package headers
Summary: Header files for the Linux kernel for use by glibc
Obsoletes: glibc-kernheaders < 3.0-46
Provides: glibc-kernheaders = 3.0-46
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.
%package cross-headers
Summary: Header files for the Linux kernel for use by cross-glibc
%description cross-headers
Kernel-cross-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
cross-glibc package.
%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Provides: installonlypkg(kernel)
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.
%if %{with_perf}
%package -n perf
Summary: Performance monitoring for the Linux kernel
Requires: bzip2
License: GPLv2
%description -n perf
This package contains the perf tool, which enables performance monitoring
of the Linux kernel.
%package -n perf-debuginfo
Summary: Debug information for package perf
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n perf-debuginfo
This package provides debug information for the perf package.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
%package -n python3-perf
Summary: Python bindings for apps which will manipulate perf events
%description -n python3-perf
The python3-perf package contains a module that permits applications
written in the Python programming language to use the interface
to manipulate perf events.
%package -n python3-perf-debuginfo
Summary: Debug information for package perf python bindings
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n python3-perf-debuginfo
This package provides debug information for the perf python bindings.
# the python_sitearch macro should already be defined from above
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
# with_perf
%endif
%if %{with_tools}
%package -n kernel-tools
Summary: Assortment of tools for the Linux kernel
License: GPLv2
%ifarch %{cpupowerarchs}
Provides: cpupowerutils = 1:009-0.6.p1
Obsoletes: cpupowerutils < 1:009-0.6.p1
Provides: cpufreq-utils = 1:009-0.6.p1
Provides: cpufrequtils = 1:009-0.6.p1
Obsoletes: cpufreq-utils < 1:009-0.6.p1
Obsoletes: cpufrequtils < 1:009-0.6.p1
Obsoletes: cpuspeed < 1:1.5-16
Requires: kernel-tools-libs = %{version}-%{release}
%endif
%define __requires_exclude ^%{_bindir}/python
%description -n kernel-tools
This package contains the tools/ directory from the kernel source
and the supporting documentation.
%package -n kernel-tools-libs
Summary: Libraries for the kernels-tools
License: GPLv2
%description -n kernel-tools-libs
This package contains the libraries built from the tools/ directory
from the kernel source.
%package -n kernel-tools-libs-devel
Summary: Assortment of tools for the Linux kernel
License: GPLv2
Requires: kernel-tools = %{version}-%{release}
%ifarch %{cpupowerarchs}
Provides: cpupowerutils-devel = 1:009-0.6.p1
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
%endif
Requires: kernel-tools-libs = %{version}-%{release}
Provides: kernel-tools-devel
%description -n kernel-tools-libs-devel
This package contains the development files for the tools/ directory from
the kernel source.
%package -n kernel-tools-debuginfo
Summary: Debug information for package kernel-tools
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n kernel-tools-debuginfo
This package provides debug information for package kernel-tools.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
# with_tools
%endif
%if %{with_bpftool}
%package -n bpftool
Summary: Inspection and simple manipulation of eBPF programs and maps
License: GPLv2
%description -n bpftool
This package contains the bpftool, which allows inspection and simple
manipulation of eBPF programs and maps.
%package -n bpftool-debuginfo
Summary: Debug information for package bpftool
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n bpftool-debuginfo
This package provides debug information for the bpftool package.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
# with_bpftool
%endif
%if %{with_selftests}
%package selftests-internal
Summary: Kernel samples and selftests
License: GPLv2
Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
%description selftests-internal
Kernel sample programs and selftests.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
# with_selftests
%endif
%if %{with_gcov}
%package gcov
Summary: gcov graph and source files for coverage data collection.
%description gcov
kernel-gcov includes the gcov graph and source files for gcov coverage collection.
%endif
%package -n kernel-abi-stablelists
Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
AutoReqProv: no
%description -n kernel-abi-stablelists
The kABI package contains information pertaining to the Red Hat Enterprise
Linux kernel ABI, including lists of kernel symbols that are needed by
external Linux kernel modules, and a yum plugin to aid enforcement.
%if %{with_kabidw_base}
%package kernel-kabidw-base-internal
Summary: The baseline dataset for kABI verification using DWARF data
Group: System Environment/Kernel
AutoReqProv: no
%description kernel-kabidw-base-internal
The package contains data describing the current ABI of the Red Hat Enterprise
Linux kernel, suitable for the kabi-dw tool.
%endif
#
# This macro creates a kernel-<subpackage>-debuginfo package.
# %%kernel_debuginfo_package <subpackage>
#
# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
# pae etc.) so the regex filters those kernels appropriately. We also
# have to package several binaries as part of kernel-devel but getting
# unique build-ids is tricky for these userspace binaries. We don't really
# care about debugging those so we just filter those out and remove it.
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
%description %{?1:%{1}-}debuginfo\
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
%{nil}
#
# This macro creates a kernel-<subpackage>-devel package.
# %%kernel_devel_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_package(m) \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
Requires(pre): findutils\
Requires: findutils\
Requires: perl-interpreter\
Requires: openssl-devel\
Requires: elfutils-libelf-devel\
Requires: bison\
Requires: flex\
Requires: make\
Requires: gcc\
%if %{-m:1}%{!-m:0}\
Requires: kernel-devel-uname-r = %{KVERREL}\
%endif\
%description %{?1:%{1}-}devel\
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}
#
# This macro creates an empty kernel-<subpackage>-devel-matched package that
# requires both the core and devel packages locked on the same version.
# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_matched_package(m) \
%package %{?1:%{1}-}devel-matched\
Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
%description %{?1:%{1}-}devel-matched\
This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
%{nil}
#
# kernel-<variant>-ipaclones-internal package
#
%define kernel_ipaclones_package() \
%package %{?1:%{1}-}ipaclones-internal\
Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
Group: System Environment/Kernel\
AutoReqProv: no\
%description %{?1:%{1}-}ipaclones-internal\
This package provides *.ipa-clones files.\
%{nil}
#
# This macro creates a kernel-<subpackage>-modules-internal package.
# %%kernel_modules_internal_package <subpackage> <pretty-name>
#
%define kernel_modules_internal_package() \
%package %{?1:%{1}-}modules-internal\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-internal\
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
%{nil}
#
# This macro creates a kernel-<subpackage>-modules-extra package.
# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_extra_package(m) \
%package %{?1:%{1}-}modules-extra\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-extra-uname-r = %{KVERREL}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-extra\
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
%{nil}
#
# This macro creates a kernel-<subpackage>-modules package.
# %%kernel_modules_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_package(m) \
%package %{?1:%{1}-}modules\
Summary: kernel modules to match the %{?2:%{2}-}core kernel\
Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-uname-r = %{KVERREL}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules\
This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}
#
# this macro creates a kernel-<subpackage> meta package.
# %%kernel_meta_package <subpackage>
#
%define kernel_meta_package() \
%package %{1}\
summary: kernel meta-package for the %{1} kernel\
Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
Provides: installonlypkg(kernel)\
%description %{1}\
The meta-package for the %{1} kernel\
%{nil}
#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
# %%define variant_summary The Linux kernel compiled for <configuration>
# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
#
%define kernel_variant_package(n:m) \
%package %{?1:%{1}-}core\
Summary: %{variant_summary}\
Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
Provides: installonlypkg(kernel)\
%if %{-m:1}%{!-m:0}\
Requires: kernel-core-uname-r = %{KVERREL}\
%endif\
%{expand:%%kernel_reqprovconf}\
%if %{?1:1} %{!?1:0} \
%{expand:%%kernel_meta_package %{?1:%{1}}}\
%endif\
%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%if %{-m:0}%{!-m:1}\
%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
%endif\
%{nil}
# Now, each variant package.
%if %{with_pae}
%define variant_summary The Linux kernel compiled for Cortex-A15
%kernel_variant_package lpae
%description lpae-core
This package includes a version of the Linux kernel with support for
Cortex-A15 devices with LPAE and HW virtualisation support
%endif
%if %{with_zfcpdump}
%define variant_summary The Linux kernel compiled for zfcpdump usage
%kernel_variant_package zfcpdump
%description zfcpdump-core
The kernel package contains the Linux kernel (vmlinuz) for use by the
zfcpdump infrastructure.
# with_zfcpdump
%endif
%define variant_summary The Linux kernel compiled with extra debugging enabled
%if !%{debugbuildsenabled}
%kernel_variant_package -m debug
%else
%kernel_variant_package debug
%endif
%description debug-core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
# And finally the main -core package
%define variant_summary The Linux kernel
%kernel_variant_package
%description core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
%if %{with_ipaclones}
%kernel_ipaclones_package
%endif
%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif
# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
for patch in %{patches} ; do
if [ ! -f $patch ] ; then
echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
exit 1
fi
done
fi 2>/dev/null
patch_command='patch -p1 -F1 -s'
ApplyPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
if [ "${patch:0:8}" != "patch-5." ] ; then
echo "ERROR: Patch $patch not listed as a source patch in specfile"
exit 1
fi
fi 2>/dev/null
case "$patch" in
*.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
esac
}
# don't apply patch if it's empty
ApplyOptionalPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
if [ "$C" -gt 9 ]; then
ApplyPatch $patch ${1+"$@"}
fi
}
%setup -q -n kernel-5.15.17 -c
mv linux-5.15.17 linux-%{KVERREL}
cd linux-%{KVERREL}
cp -a %{SOURCE1} .
%if !%{nopatches}
ApplyOptionalPatch patch-%{patchversion}-redhat.patch
%endif
ApplyOptionalPatch linux-kernel-test.patch
# END OF PATCH APPLICATIONS
# Any further pre-build tree manipulations happen here.
chmod +x scripts/checkpatch.pl
mv COPYING COPYING-%{version}-%{release}
# This Prevents scripts/setlocalversion from mucking with our version numbers.
touch .scmversion
# Mangle /usr/bin/python shebangs to /usr/bin/python3
# Mangle all Python shebangs to be Python 3 explicitly
# -p preserves timestamps
# -n prevents creating ~backup files
# -i specifies the interpreter for the shebang
# This fixes errors such as
# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
# We patch all sources below for which we got a report/error.
pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
tools/kvm/kvm_stat/kvm_stat \
scripts/show_delta \
scripts/diffconfig \
scripts/bloat-o-meter \
scripts/jobserver-exec \
tools \
Documentation \
scripts/clang-tools
# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches
if [ -L configs ]; then
rm -f configs
fi
mkdir configs
cd configs
# Drop some necessary files from the source dir into the buildroot
cp $RPM_SOURCE_DIR/kernel-*.config .
cp %{SOURCE80} .
# merge.pl
cp %{SOURCE3000} .
# kernel-local
cp %{SOURCE3001} .
VERSION=%{version} ./generate_all_configs.sh %{primary_target} %{debugbuildsenabled}
# Merge in any user-provided local config option changes
%ifnarch %nobuildarches
for i in %{all_arch_configs}
do
mv $i $i.tmp
./merge.pl %{SOURCE3001} $i.tmp > $i
%if %{with_gcov}
echo "Merging with gcov options"
cat %{SOURCE75}
mv $i $i.tmp
./merge.pl %{SOURCE75} $i.tmp > $i
%endif
rm $i.tmp
done
%endif
%if %{with clang_lto}
for i in *aarch64*.config *x86_64*.config; do
sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
done
%endif
# Add DUP and kpatch certificates to system trusted keys for RHEL
%if 0%{?rhel}
%if %{signkernel}%{signmodules}
openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
%ifarch s390x ppc64le
openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
cat secureboot.pem >> ../certs/rhel.pem
%endif
for i in *.config; do
sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
done
%endif
%endif
cp %{SOURCE81} .
OPTS=""
%if %{with_configchecks}
OPTS="$OPTS -w -n -c"
%endif
%if %{with clang_lto}
for opt in %{clang_make_opts}; do
OPTS="$OPTS -m $opt"
done
%endif
./process_configs.sh $OPTS kernel %{rpmversion}
cp %{SOURCE82} .
RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
# end of kernel config
%endif
cd ..
# # End of Configs stuff
# get rid of unwanted files resulting from patch fuzz
find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
# remove unnecessary SCM files
find . -name .gitignore -delete >/dev/null
cd ..
###
### build
###
%build
%if %{with_sparse}
%define sparse_mflags C=1
%endif
cp_vmlinux()
{
eu-strip --remove-comment -o "$2" "$1"
}
# Note we need to disable these flags for cross builds because the flags
# from redhat-rpm-config assume that host == target so target arch
# flags cause issues with the host compiler.
%if !%{with_cross}
%define build_hostcflags %{?build_cflags}
%define build_hostldflags %{?build_ldflags}
%endif
%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
InitBuildVars() {
# Initialize the kernel .config file and create some variables that are
# needed for the actual build process.
Variant=$1
# Pick the right kernel config file
Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
# make sure EXTRAVERSION says what we want it to say
# Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
# if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
# if we are post rc1 this should match anyway so this won't matter
perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
%{make} %{?_smp_mflags} mrproper
cp configs/$Config .config
%if %{signkernel}%{signmodules}
cp $RPM_SOURCE_DIR/x509.genkey certs/.
%endif
Arch=`head -1 .config | cut -b 3-`
echo USING ARCH=$Arch
KCFLAGS="%{?kcflags}"
# add kpatch flags for base kernel
if [ "$Variant" == "" ]; then
KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
fi
}
BuildKernel() {
MakeTarget=$1
KernelImage=$2
DoVDSO=$3
Variant=$4
InstallName=${5:-vmlinuz}
DoModules=1
if [ "$Variant" = "zfcpdump" ]; then
DoModules=0
fi
# When the bootable image is just the ELF kernel, strip it.
# We already copy the unstripped file into the debuginfo package.
if [ "$KernelImage" = vmlinux ]; then
CopyKernel=cp_vmlinux
else
CopyKernel=cp
fi
InitBuildVars $Variant
echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
%{make} ARCH=$Arch olddefconfig >/dev/null
# This ensures build-ids are unique to allow parallel debuginfo
perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
if [ $DoModules -eq 1 ]; then
%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
fi
mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
%if %{with_debuginfo}
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif
%ifarch %{arm} aarch64
%{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
%{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
%endif
# Start installing the results
install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
# We estimate the size of the initramfs because rpm needs to take this size
# into consideration when performing disk space calculations. (See bz #530778)
dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
if [ -f arch/$Arch/boot/zImage.stub ]; then
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
fi
%if %{signkernel}
if [ "$KernelImage" = vmlinux ]; then
# We can't strip and sign $KernelImage in place, because
# we need to preserve original vmlinux for debuginfo.
# Use a copy for signing.
$CopyKernel $KernelImage $KernelImage.tosign
KernelImage=$KernelImage.tosign
CopyKernel=cp
fi
# Sign the image if we're using EFI
# aarch64 kernels are gziped EFI images
KernelExtension=${KernelImage##*.}
if [ "$KernelExtension" == "gz" ]; then
SignImage=${KernelImage%.*}
else
SignImage=$KernelImage
fi
%ifarch x86_64 aarch64
%pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
%pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
rm vmlinuz.tmp
%endif
%ifarch s390x ppc64le
if [ -x /usr/bin/rpm-sign ]; then
rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
elif [ $DoModules -eq 1 ]; then
chmod +x scripts/sign-file
./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
else
mv $SignImage vmlinuz.signed
fi
%endif
if [ ! -s vmlinuz.signed ]; then
echo "pesigning failed"
exit 1
fi
mv vmlinuz.signed $SignImage
if [ "$KernelExtension" == "gz" ]; then
gzip -f9 $SignImage
fi
# signkernel
%endif
$CopyKernel $KernelImage \
$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
# hmac sign the kernel for FIPS
echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
if [ $DoModules -eq 1 ]; then
# Override $(mod-fw) because we don't want it to install any firmware
# we'll get it from the linux-firmware package and we don't want conflicts
%{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
fi
%if %{with_gcov}
# install gcov-needed files to $BUILDROOT/$BUILD/...:
# gcov_info->filename is absolute path
# gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
# sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
%endif
# add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
if [ $DoVDSO -ne 0 ]; then
%{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
if [ -s ldconfig-kernel.conf ]; then
install -D -m 444 ldconfig-kernel.conf \
$RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
fi
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
fi
# And save the headers/makefiles etc for building modules against
#
# This all looks scary, but the end result is supposed to be:
# * all arch relevant include/ files
# * all Makefile/Kconfig files
# * all script/ files
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
(cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
# dirs for additional modules per module-init-tools, kbuild/modules.txt
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
# CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
# testing so just delete
find . -name *.h.s -delete
# first copy everything
cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ ! -e Module.symvers ]; then
touch Module.symvers
fi
cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -s Module.markers ]; then
cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
fi
# create the kABI metadata for use in packaging
# NOTENOTE: the name symvers is used by the rpm backend
# NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
# NOTENOTE: script which dynamically adds exported kernel symbol
# NOTENOTE: checksums to the rpm metadata provides list.
# NOTENOTE: if you change the symvers name, update the backend too
echo "**** GENERATING kernel ABI metadata ****"
gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
%if %{with_kabichk}
echo "**** kABI checking is enabled in kernel SPEC file. ****"
chmod 0755 $RPM_SOURCE_DIR/check-kabi
if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
$RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
# for now, don't keep it around.
rm $RPM_BUILD_ROOT/Module.kabi
else
echo "**** NOTE: Cannot find reference Module.kabi file. ****"
fi
%endif
%if %{with_kabidupchk}
echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
$RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
# for now, don't keep it around.
rm $RPM_BUILD_ROOT/Module.kabi
else
echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
fi
%endif
%if %{with_kabidw_base}
# Don't build kabi base for debug kernels
if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
echo "**** GENERATING DWARF-based kABI baseline dataset ****"
chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
"$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
"$(pwd)" \
"$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
rm -rf $RPM_BUILD_ROOT/kabi-dwarf
fi
%endif
%if %{with_kabidwchk}
if [ "$Variant" != "zfcpdump" ]; then
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
echo "**** GENERATING DWARF-based kABI dataset ****"
chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
"$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
"$(pwd)" \
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
echo "**** kABI DWARF-based comparison report ****"
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
echo "**** End of kABI DWARF-based comparison report ****"
else
echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
fi
rm -rf $RPM_BUILD_ROOT/kabi-dwarf
fi
%endif
# then drop all but the needed Makefiles/Kconfig files
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
# Files for 'make scripts' to succeed with kernel-devel.
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
# Files for 'make prepare' to succeed with kernel-devel.
cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -f tools/objtool/objtool ]; then
cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
fi
if [ -f tools/objtool/fixdep ]; then
cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
fi
if [ -d arch/$Arch/scripts ]; then
cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
fi
if [ -f arch/$Arch/*lds ]; then
cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
fi
if [ -f arch/%{asmarch}/kernel/module.lds ]; then
cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
%ifarch ppc64le
cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
if [ -d arch/%{asmarch}/include ]; then
cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
%ifarch aarch64
# arch/arm64/include/asm/xen references arch/arm
cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
# arch/arm64/include/asm/opcodes.h references arch/arm
cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
# include the machine specific headers for ARM variants, if available.
%ifarch %{arm}
if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
# include a few files for 'make prepare'
cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
%ifarch i686 x86_64
# files for 'make prepare' to succeed with kernel-devel
cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
%endif
# Clean up intermediate tools files
find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
# Make sure the Makefile and version.h have a matching timestamp so that
# external modules can be built
touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h
# Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
%if %{with_debuginfo}
eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
#
# save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
#
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
if [ -n "%{vmlinux_decompressor}" ]; then
eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
# Without build-id the build will fail. But for s390 the build-id
# wasn't added before 5.11. In case it is missing prefer not
# packaging the debuginfo over a build failure.
if [ -s vmlinux.decompressor.id ]; then
cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
fi
fi
%endif
find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
# mark modules executable so that strip-to-file can strip them
xargs --no-run-if-empty chmod u+x < modnames
# Generate a list of modules for block and networking.
grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
collect_modules_list()
{
sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
if [ ! -z "$3" ]; then
sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
fi
}
collect_modules_list networking \
'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
collect_modules_list block \
'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
collect_modules_list drm \
'drm_open|drm_init'
collect_modules_list modesetting \
'drm_crtc_init'
# detect missing or incorrect license tags
( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
remove_depmod_files()
{
# remove files that will be auto generated by depmod at rpm -i time
pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
popd
}
remove_depmod_files
# Identify modules in the kernel-modules-extras package
%{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $RPM_SOURCE_DIR/mod-extra.list
# Identify modules in the kernel-modules-extras package
%{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
#
# Generate the kernel-core and kernel-modules files lists
#
# Copy the System.map file for depmod to use, and create a backup of the
# full module tree so we can restore it after we're done filtering
cp System.map $RPM_BUILD_ROOT/.
pushd $RPM_BUILD_ROOT
mkdir restore
cp -r lib/modules/$KernelVer/* restore/.
# don't include anything going into kernel-modules-extra in the file lists
xargs rm -rf < mod-extra.list
# don't include anything going int kernel-modules-internal in the file lists
xargs rm -rf < mod-internal.list
if [ $DoModules -eq 1 ]; then
# Find all the module files and filter them out into the core and
# modules lists. This actually removes anything going into -modules
# from the dir.
find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
cp $RPM_SOURCE_DIR/filter-*.sh .
./filter-modules.sh modules.list %{_target_cpu}
rm filter-*.sh
# Run depmod on the resulting module tree and make sure it isn't broken
depmod -b . -aeF ./System.map $KernelVer &> depmod.out
if [ -s depmod.out ]; then
echo "Depmod failure"
cat depmod.out
exit 1
else
rm depmod.out
fi
else
# Ensure important files/directories exist to let the packaging succeed
echo '%%defattr(-,-,-)' > modules.list
echo '%%defattr(-,-,-)' > k-d.list
mkdir -p lib/modules/$KernelVer/kernel
# Add files usually created by make modules, needed to prevent errors
# thrown by depmod during package installation
touch lib/modules/$KernelVer/modules.order
touch lib/modules/$KernelVer/modules.builtin
fi
remove_depmod_files
# Go back and find all of the various directories in the tree. We use this
# for the dir lists in kernel-core
find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
# Cleanup
rm System.map
cp -r restore/* lib/modules/$KernelVer/.
rm -rf restore
popd
# Make sure the files lists start with absolute paths or rpmbuild fails.
# Also add in the dir entries
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
# Cleanup
rm -f $RPM_BUILD_ROOT/k-d.list
rm -f $RPM_BUILD_ROOT/modules.list
rm -f $RPM_BUILD_ROOT/module-dirs.list
rm -f $RPM_BUILD_ROOT/mod-extra.list
rm -f $RPM_BUILD_ROOT/mod-internal.list
%if %{signmodules}
if [ $DoModules -eq 1 ]; then
# Save the signing keys so we can sign the modules in __modsign_install_post
cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
fi
%endif
# Move the devel headers out of the root file system
mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
# This is going to create a broken link during the build, but we don't use
# it after this point. We need the link to actually point to something
# when kernel-devel is installed, and a relative link doesn't work across
# the F17 UsrMove feature.
ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
%ifnarch armv7hl
# Generate vmlinux.h and put it to kernel-devel path
bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
%endif
# prune junk from kernel-devel
find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
# Generate crashkernel default config
%{SOURCE83} "$KernelVer" "$Arch" "$RPM_BUILD_ROOT"
# Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
%ifarch x86_64 aarch64
install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
%else
install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
%endif
%ifarch s390x ppc64le
if [ $DoModules -eq 1 ]; then
if [ -x /usr/bin/rpm-sign ]; then
install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
else
install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
fi
fi
%endif
%if %{with_ipaclones}
MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
if [ -z "$MAXPROCS" ]; then
MAXPROCS=1
fi
if [ "$Variant" == "" ]; then
mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
fi
%endif
}
###
# DO it...
###
# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
cd linux-%{KVERREL}
%if %{with_debug}
BuildKernel %make_target %kernel_image %{_use_vdso} debug
%endif
%if %{with_zfcpdump}
BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
%endif
%if %{with_pae}
BuildKernel %make_target %kernel_image %{use_vdso} lpae
%endif
%if %{with_up}
BuildKernel %make_target %kernel_image %{_use_vdso}
%endif
%ifnarch noarch i686
%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
# If only building the user space tools, then initialize the build environment
# and some variables so that the various userspace tools can be built.
InitBuildVars
%endif
%endif
%ifarch aarch64
%global perf_build_extra_opts CORESIGHT=1
%endif
%global perf_make \
%{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
%if %{with_perf}
# perf
# make sure check-headers.sh is executable
chmod +x tools/perf/check-headers.sh
%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
%endif
%global tools_make \
%{make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?make_opts}
%if %{with_tools}
%ifarch %{cpupowerarchs}
# cpupower
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
%ifarch x86_64
pushd tools/power/cpupower/debug/x86_64
%{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
popd
%endif
%ifarch x86_64
pushd tools/power/x86/x86_energy_perf_policy/
%{tools_make}
popd
pushd tools/power/x86/turbostat
%{tools_make}
popd
pushd tools/power/x86/intel-speed-select
%{make}
popd
%endif
%endif
pushd tools/thermal/tmon/
%{tools_make}
popd
pushd tools/iio/
%{tools_make}
popd
pushd tools/gpio/
%{tools_make}
popd
# build VM tools
pushd tools/vm/
%{tools_make} slabinfo page_owner_sort
popd
%endif
if [ -f $DevelDir/vmlinux.h ]; then
RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi
%global bpftool_make \
%{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
%if %{with_bpftool}
pushd tools/bpf/bpftool
%{bpftool_make}
popd
%endif
%if %{with_selftests}
# Unfortunately, samples/bpf/Makefile expects that the headers are installed
# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
# but there's no way to tell the Makefile to take them from there.
%{make} %{?_smp_mflags} headers_install
%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
# Prevent bpf selftests to build bpftool repeatedly:
export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
pushd tools/testing/selftests
# We need to install here because we need to call make with ARCH set which
# doesn't seem possible to do in the install section.
%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
# 'make install' for bpf is broken and upstream refuses to fix it.
# Install the needed files manually.
for dir in bpf bpf/no_alu32 bpf/progs; do
# In ARK, the rpm build continues even if some of the selftests
# cannot be built. It's not always possible to build selftests,
# as upstream sometimes dependens on too new llvm version or has
# other issues. If something did not get built, just skip it.
test -d $dir || continue
mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
-name 'btf_dump_test_case_*.c' -o \
-name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
done
popd
export -n BPFTOOL
%endif
%if %{with_doc}
# Make the HTML pages.
%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
# sometimes non-world-readable files sneak into the kernel source tree
chmod -R a=rX Documentation
find Documentation -type d | xargs chmod u+w
%endif
# In the modsign case, we do 3 things. 1) We check the "variant" and hard
# code the value in the following invocations. This is somewhat sub-optimal
# but we're doing this inside of an RPM macro and it isn't as easy as it
# could be because of that. 2) We restore the .tmp_versions/ directory from
# the one we saved off in BuildKernel above. This is to make sure we're
# signing the modules we actually built/installed in that variant. 3) We
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
#
# We have to do all of those things _after_ find-debuginfo runs, otherwise
# that will strip the signature off of the modules.
#
# Don't sign modules for the zfcpdump variant as it is monolithic.
%define __modsign_install_post \
if [ "%{signmodules}" -eq "1" ]; then \
if [ "%{with_pae}" -ne "0" ]; then \
%{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
fi \
if [ "%{with_debug}" -ne "0" ]; then \
%{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
fi \
if [ "%{with_up}" -ne "0" ]; then \
%{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
fi \
fi \
if [ "%{zipmodules}" -eq "1" ]; then \
find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P%{zcpu} xz; \
fi \
%{nil}
###
### Special hacks for debuginfo subpackages.
###
# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}
%if %{with_debuginfo}
%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%endif
%endif
# We don't want to package debuginfo for self-tests and samples but
# we have to delete them to avoid an error messages about unpackaged
# files.
# Delete the debuginfo for kernel-devel files
%define __remove_unwanted_dbginfo_install_post \
if [ "%{with_selftests}" -ne "0" ]; then \
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
fi \
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
%{nil}
#
# Disgusting hack alert! We need to ensure we sign modules *after* all
# invocations of strip occur, which is in __debug_install_post if
# find-debuginfo.sh runs, and __os_install_post if not.
#
%define __spec_install_post \
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{__remove_unwanted_dbginfo_install_post}\
%{__modsign_install_post}
###
### install
###
%install
cd linux-%{KVERREL}
%if %{with_doc}
docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}
# copy the source over
mkdir -p $docdir
tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
# with_doc
%endif
# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.
%if %{with_headers}
# Install kernel headers
%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
find $RPM_BUILD_ROOT/usr/include \
\( -name .install -o -name .check -o \
-name ..install.cmd -o -name ..check.cmd \) -delete
%endif
%if %{with_cross_headers}
%if 0%{?fedora}
HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
%else
HDR_ARCH_LIST='arm64 powerpc s390 x86'
%endif
mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
for arch in $HDR_ARCH_LIST; do
mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
%{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
done
find $RPM_BUILD_ROOT/usr/tmp-headers \
\( -name .install -o -name .check -o \
-name ..install.cmd -o -name ..check.cmd \) -delete
# Copy all the architectures we care about to their respective asm directories
for arch in $HDR_ARCH_LIST ; do
mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
done
rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
%endif
%if %{with_kernel_abi_stablelists}
# kabi directory
INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
mkdir -p $INSTALL_KABI_PATH
# install kabi releases directories
tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
# with_kernel_abi_stablelists
%endif
%if %{with_perf}
# perf tool binary and supporting scripts/binaries
%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
# remove the 'trace' symlink.
rm -f %{buildroot}%{_bindir}/trace
# For both of the below, yes, this should be using a macro but right now
# it's hard coded and we don't actually want it anyway right now.
# Whoever wants examples can fix it up!
# remove examples
rm -rf %{buildroot}/usr/lib/perf/examples
rm -rf %{buildroot}/usr/lib/perf/include
# python-perf extension
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
# perf man pages (note: implicit rpm magic compresses them later)
mkdir -p %{buildroot}/%{_mandir}/man1
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
# remove any tracevent files, eg. its plugins still gets built and installed,
# even if we build against system's libtracevent during perf build (by setting
# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
# ship with libtraceevent package.
rm -rf %{buildroot}%{_libdir}/traceevent
%endif
%if %{with_tools}
%ifarch %{cpupowerarchs}
%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
%ifarch x86_64
pushd tools/power/cpupower/debug/x86_64
install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
popd
%endif
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
%endif
%ifarch x86_64
mkdir -p %{buildroot}%{_mandir}/man8
pushd tools/power/x86/x86_energy_perf_policy
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/power/x86/turbostat
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/power/x86/intel-speed-select
%{tools_make} CFLAGS+="-D_GNU_SOURCE -Iinclude" DESTDIR=%{buildroot} install
popd
%endif
pushd tools/thermal/tmon
%{tools_make} INSTALL_ROOT=%{buildroot} install
popd
pushd tools/iio
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/gpio
%{tools_make} DESTDIR=%{buildroot} install
popd
install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
pushd tools/kvm/kvm_stat
%{__make} INSTALL_ROOT=%{buildroot} install-tools
%{__make} INSTALL_ROOT=%{buildroot} install-man
install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
popd
# install VM tools
pushd tools/vm/
install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
popd
%endif
if [ -f $DevelDir/vmlinux.h ]; then
RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi
%if %{with_bpftool}
pushd tools/bpf/bpftool
%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
popd
%endif
%if %{with_selftests}
pushd samples
install -d %{buildroot}%{_libexecdir}/ksamples
# install bpf samples
pushd bpf
install -d %{buildroot}%{_libexecdir}/ksamples/bpf
find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
# kernel tree. Just remove it.
rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
popd
# install pktgen samples
pushd pktgen
install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
popd
popd
# install drivers/net/mlxsw selftests
pushd tools/testing/selftests/drivers/net/mlxsw
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
popd
# install drivers/net/netdevsim selftests
pushd tools/testing/selftests/drivers/net/netdevsim
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
popd
# install net/forwarding selftests
pushd tools/testing/selftests/net/forwarding
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
popd
# install net/mptcp selftests
pushd tools/testing/selftests/net/mptcp
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
popd
# install tc-testing selftests
pushd tools/testing/selftests/tc-testing
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
popd
# install livepatch selftests
pushd tools/testing/selftests/livepatch
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
popd
# install netfilter selftests
pushd tools/testing/selftests/netfilter
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
popd
%endif
###
### clean
###
###
### scripts
###
%if %{with_tools}
%post -n kernel-tools-libs
/sbin/ldconfig
%postun -n kernel-tools-libs
/sbin/ldconfig
%endif
#
# This macro defines a %%post script for a kernel*-devel package.
# %%kernel_devel_post [<subpackage>]
# Note we don't run hardlink if ostree is in use, as ostree is
# a far more sophisticated hardlink implementation.
# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
. /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
then\
(cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
/usr/bin/find . -type f | while read f; do\
hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
done)\
fi\
%{nil}
#
# This macro defines a %%post script for a kernel*-modules-extra package.
# It also defines a %%postun script that does the same thing.
# %%kernel_modules_extra_post [<subpackage>]
#
%define kernel_modules_extra_post() \
%{expand:%%post %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
#
# This macro defines a %%post script for a kernel*-modules-internal package.
# It also defines a %%postun script that does the same thing.
# %%kernel_modules_internal_post [<subpackage>]
#
%define kernel_modules_internal_post() \
%{expand:%%post %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
#
# This macro defines a %%post script for a kernel*-modules package.
# It also defines a %%postun script that does the same thing.
# %%kernel_modules_post [<subpackage>]
#
%define kernel_modules_post() \
%{expand:%%post %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
# This macro defines a %%posttrans script for a kernel package.
# %%kernel_variant_posttrans [<subpackage>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans() \
%{expand:%%posttrans %{?1:%{1}-}core}\
%if 0%{!?fedora:1}\
if [ -x %{_sbindir}/weak-modules ]\
then\
%{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
fi\
%endif\
/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
%{nil}
#
# This macro defines a %%post script for a kernel package and its devel package.
# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
%{expand:%%kernel_modules_post %{?-v*}}\
%{expand:%%kernel_modules_extra_post %{?-v*}}\
%{expand:%%kernel_modules_internal_post %{?-v*}}\
%{expand:%%kernel_variant_posttrans %{?-v*}}\
%{expand:%%post %{?-v*:%{-v*}-}core}\
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
[ -f /etc/sysconfig/kernel ]; then\
/bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
%{nil}
#
# This macro defines a %%preun script for a kernel package.
# %%kernel_variant_preun <subpackage>
#
%define kernel_variant_preun() \
%{expand:%%preun %{?1:%{1}-}core}\
/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
if [ -x %{_sbindir}/weak-modules ]\
then\
%{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
fi\
%{nil}
%kernel_variant_preun
%kernel_variant_post -r kernel-smp
%if %{with_pae}
%kernel_variant_preun lpae
%kernel_variant_post -v lpae -r (kernel|kernel-smp)
%endif
%if %{with_debug}
%kernel_variant_preun debug
%kernel_variant_post -v debug
%endif
%if %{with_zfcpdump}
%kernel_variant_preun zfcpdump
%kernel_variant_post -v zfcpdump
%endif
if [ -x /sbin/ldconfig ]
then
/sbin/ldconfig -X || exit $?
fi
###
### file lists
###
%if %{with_headers}
%files headers
/usr/include/*
%endif
%if %{with_cross_headers}
%files cross-headers
/usr/*-linux-gnu/include/*
%endif
%if %{with_kernel_abi_stablelists}
%files -n kernel-abi-stablelists
/lib/modules/kabi-*
%endif
%if %{with_kabidw_base}
%ifarch x86_64 s390x ppc64 ppc64le aarch64
%files kernel-kabidw-base-internal
%defattr(-,root,root)
/kabidw-base/%{_target_cpu}/*
%endif
%endif
# only some architecture builds need kernel-doc
%if %{with_doc}
%files doc
%defattr(-,root,root)
%{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}/Documentation/*
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}/Documentation
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}
%endif
%if %{with_perf}
%files -n perf
%{_bindir}/perf
%{_libdir}/libperf-jvmti.so
%dir %{_libexecdir}/perf-core
%{_libexecdir}/perf-core/*
%{_datadir}/perf-core/*
%{_mandir}/man[1-8]/perf*
%{_sysconfdir}/bash_completion.d/perf
%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
%{_docdir}/perf-tip/tips.txt
%files -n python3-perf
%{python3_sitearch}/*
%if %{with_debuginfo}
%files -f perf-debuginfo.list -n perf-debuginfo
%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
%endif
# with_perf
%endif
%if %{with_tools}
%ifnarch %{cpupowerarchs}
%files -n kernel-tools
%else
%files -n kernel-tools -f cpupower.lang
%{_bindir}/cpupower
%{_datadir}/bash-completion/completions/cpupower
%ifarch x86_64
%{_bindir}/centrino-decode
%{_bindir}/powernow-k8-decode
%endif
%{_unitdir}/cpupower.service
%{_mandir}/man[1-8]/cpupower*
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
%ifarch x86_64
%{_bindir}/x86_energy_perf_policy
%{_mandir}/man8/x86_energy_perf_policy*
%{_bindir}/turbostat
%{_mandir}/man8/turbostat*
%{_bindir}/intel-speed-select
%endif
# cpupowerarchs
%endif
%{_bindir}/tmon
%{_bindir}/iio_event_monitor
%{_bindir}/iio_generic_buffer
%{_bindir}/lsiio
%{_bindir}/lsgpio
%{_bindir}/gpio-hammer
%{_bindir}/gpio-event-mon
%{_bindir}/gpio-watch
%{_mandir}/man1/kvm_stat*
%{_bindir}/kvm_stat
%{_unitdir}/kvm_stat.service
%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
%{_bindir}/page_owner_sort
%{_bindir}/slabinfo
%if %{with_debuginfo}
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
%endif
%ifarch %{cpupowerarchs}
%files -n kernel-tools-libs
%{_libdir}/libcpupower.so.0
%{_libdir}/libcpupower.so.0.0.1
%files -n kernel-tools-libs-devel
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%endif
# with_tools
%endif
%if %{with_bpftool}
%files -n bpftool
%{_sbindir}/bpftool
%{_sysconfdir}/bash_completion.d/bpftool
%{_mandir}/man8/bpftool-cgroup.8.gz
%{_mandir}/man8/bpftool-gen.8.gz
%{_mandir}/man8/bpftool-iter.8.gz
%{_mandir}/man8/bpftool-link.8.gz
%{_mandir}/man8/bpftool-map.8.gz
%{_mandir}/man8/bpftool-prog.8.gz
%{_mandir}/man8/bpftool-perf.8.gz
%{_mandir}/man8/bpftool.8.gz
%{_mandir}/man8/bpftool-net.8.gz
%{_mandir}/man8/bpftool-feature.8.gz
%{_mandir}/man8/bpftool-btf.8.gz
%{_mandir}/man8/bpftool-struct_ops.8.gz
%if %{with_debuginfo}
%files -f bpftool-debuginfo.list -n bpftool-debuginfo
%defattr(-,root,root)
%endif
%endif
%if %{with_selftests}
%files selftests-internal
%{_libexecdir}/ksamples
%{_libexecdir}/kselftests
%endif
# empty meta-package
%ifnarch %nobuildarches noarch
%files
%endif
%if %{with_gcov}
%ifnarch %nobuildarches noarch
%files gcov
%{_builddir}
%endif
%endif
# This is %%{image_install_path} on an arch where that includes ELF files,
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
#
%define kernel_variant_files(k:) \
%if %{2}\
%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
%{!?_licensedir:%global license %%doc}\
%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
%ifarch %{arm} aarch64\
/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
%endif\
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/crashkernel.default\
%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
%if %{1}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
%endif\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
%{expand:%%files %{?3:%{3}-}devel}\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
%{expand:%%files %{?3:%{3}-}devel-matched}\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
%if %{with_debuginfo}\
%ifnarch noarch\
%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
%endif\
%endif\
%if %{?3:1} %{!?3:0}\
%{expand:%%files %{3}}\
%endif\
%endif\
%{nil}
%kernel_variant_files %{_use_vdso} %{with_up}
%kernel_variant_files %{_use_vdso} %{with_debug} debug
%if %{with_debug_meta}
%files debug
%files debug-core
%files debug-devel
%files debug-devel-matched
%files debug-modules
%files debug-modules-extra
%endif
%kernel_variant_files %{use_vdso} %{with_pae} lpae
%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
%define kernel_variant_ipaclones(k:) \
%if %{1}\
%if %{with_ipaclones}\
%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
%defattr(-,root,root)\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
%endif\
%endif\
%{nil}
%kernel_variant_ipaclones %{with_up}
# plz don't put in a version string unless you're going to tag
# and build.
#
#
%changelog
* Thu Jan 27 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.17-0]
- Revert "PCI/MSI: Mask MSI-X vectors only on success" (Justin M. Forbes)
* Thu Jan 20 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.16-0]
- drm/amdgpu: don't do resets on APUs which don't support it (Alex Deucher)
* Sun Jan 16 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.15-0]
- netfilter: nat: force port remap to prevent shadowing well-known ports (Florian Westphal)
- netfilter: conntrack: tag conntracks picked up in local out hook (Florian Westphal)
- configs/fedora: Enable CONFIG_NFC_PN532_UART for use PN532 NFC module (Ziqian SUN (Zamir))
* Tue Jan 11 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.14-0]
- Fix up changelog (Justin M. Forbes)
* Wed Jan 05 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.13-0]
- Linux v5.15.13
* Wed Dec 29 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.12-0]
- iwlwifi: mvm: Increase the scan timeout guard to 30 seconds (Ilan Peer)
* Wed Dec 22 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.11-0]
- Fix up Changelog (Justin M. Forbes)
* Fri Dec 17 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.10-0]
- Changelog fixes for stable (Justin M. Forbes)
- platform/x86: thinkpad_acpi: Add lid_logo_dot to the list of safe LEDs (Hans de Goede)
* Tue Dec 14 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.8-0]
- Enable CONFIG_VFIO_NOIOMMU for Fedora (Justin M. Forbes)
* Wed Dec 08 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.7-0]
- Linux v5.15.7
* Wed Dec 01 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.6-0]
- Revert "drm/i915: Implement Wa_1508744258" (Justin M. Forbes)
- Revert "Revert "fuse: fix page stealing"" (Justin M. Forbes)
- scsi: sd: Fix sd_do_mode_sense() buffer length handling (Damien Le Moal)
* Thu Nov 25 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.5-0]
- Revert "fuse: fix page stealing" (Justin M. Forbes)
* Mon Nov 22 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.4-0]
- mwifiex_usb: Fix skb_over_panic in mwifiex_usb_recv (Zekun Shen)
- atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_wait (Zekun Shen)
- Add cifs to module filters (Justin M. Forbes)
* Thu Nov 18 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.3-0]
- Enable CIFS_SMB_DIRECT for Fedora (Justin M. Forbes)
- Fedora: rockchip: move the GPIO module back to builtin (Peter Robinson)
* Fri Nov 12 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15.2-0]
- usb: xhci: tegra: Check padctrl interrupt presence in device tree (Dmitry Osipenko)
- Fedora: Enable MediaTek bluetooth pieces (Peter Robinson)
- x86/PCI/ACPI: Replace printk calls with pr_info/pr_warn calls (Hans de Goede)
- x86/PCI: Ignore E820 reservations for bridge windows on newer systems (Hans de Goede)
- Revert "[scsi] megaraid_sas: re-add certain pci-ids" (Justin M. Forbes)
- Revert "wireguard: disable in FIPS mode" (Justin M. Forbes)
- Revert "[fs] dax: mark tech preview" (Justin M. Forbes)
- Revert "wireguard: mark as Tech Preview" (Justin M. Forbes)
- Revert "add pci_hw_vendor_status()" (Justin M. Forbes)
- Input: i8042 - Add quirk for Fujitsu Lifebook T725 (Takashi Iwai)
* Mon Nov 08 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.15-0]
- btrfs: fix memory ordering between normal and ordered work functions (Nikolay Borisov)
- Turn on COMMON_CLK_AXG_AUDIO for Fedora rhbz 2020481 (Justin M. Forbes)
- fedora: gpio: tweak some GPIO drivers (Peter Robinson)
- Enable VMXNET3 for aarch64 (Peter Robinson)
- all: drop removed obsolete config options (Peter Robinson)
- Revert "fedora: Disable fbdev drivers and use simpledrm instead" (Justin M. Forbes)
- Enable binder for fedora (Justin M. Forbes)
- Add fedora-dist-git-test.sh and release_targets (Justin M. Forbes)
- Update Makefile.variables for 5.15 stable (Justin M. Forbes)
- Reset RHEL_RELEASE for 5.16 (Justin M. Forbes)
- redhat: configs: Update configs for vmware (Kamal Heib)
- Fedora configs for 5.15 (Justin M. Forbes)
- redhat/kernel.spec.template: don't hardcode gcov arches (Jan Stancek)
- redhat/configs: create a separate config for gcov options (Jan Stancek)
- Update documentation with FAQ and update frequency (Don Zickus)
- Document force pull option for mirroring (Don Zickus)
- Ignore the rhel9 kabi files (Don Zickus)
- Remove legacy elrdy cruft (Don Zickus)
* Fri Oct 29 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc7.20211029gitf25a5481af12.56]
- redhat/configs/evaluate_configs: walk cfgvariants line by line (Jan Stancek)
- redhat/configs/evaluate_configs: insert EMPTY tags at correct place (Jan Stancek)
- redhat: make dist-srpm-gcov add to BUILDOPTS (Jan Stancek)
* Thu Oct 28 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc7.20211028git1fc596a56b33.55]
- Build CONFIG_SPI_PXA2XX as a module on x86 (Justin M. Forbes)
- redhat/configs: enable CONFIG_BCMGENET as module (Joel Savitz)
* Wed Oct 27 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc7.20211027gitd25f27432f80.54]
- Fedora config updates (Justin M. Forbes)
* Tue Oct 26 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc7.53]
- Enable CONFIG_FAIL_SUNRPC for debug builds (Justin M. Forbes)
- fedora: Disable fbdev drivers and use simpledrm instead (Javier Martinez Canillas)
* Thu Oct 21 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc6.20211021git2f111a6fd5b5.49]
- Revert "bpf, selftests: Disable tests that need clang13" (Jiri Olsa)
- spec: Don't fail spec build if ksamples fails (Jiri Olsa)
- Enable CONFIG_QCOM_SCM for arm (Justin M. Forbes)
* Tue Oct 19 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc6.47]
- redhat: Disable clang's integrated assembler on ppc64le and s390x (Tom Stellard)
- redhat/configs: enable CONFIG_IMA_WRITE_POLICY (Bruno Meneguele)
* Fri Oct 15 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc5.20211015gitec681c53f8d2.43]
- Fix dist-srpm-gcov (Don Zickus)
- redhat: configs: add CONFIG_NTB and related items (John W. Linville)
- Add kfence_test to mod-internal.list (Justin M. Forbes)
* Tue Oct 12 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc5.20211012gitfa5878760579.40]
- Enable KUNIT tests for redhat kernel-modules-internal (Nico Pache)
- redhat: add *-matched meta packages to rpminspect emptyrpm config (Herton R. Krzesinski)
- Use common config for NODES_SHIFT (Mark Salter)
* Sat Oct 09 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc4.20211009git5d6ab0bb408f.37]
- redhat: fix typo and make the output more silent for dist-git sync (Herton R. Krzesinski)
* Thu Oct 07 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc4.20211007git5af4055fa813.35]
- Fedora NTFS config updates (Justin M. Forbes)
- Fedora 5.15 configs part 1 (Justin M. Forbes)
* Wed Oct 06 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc4.20211006git60a9483534ed.34]
- Revert "Merge branch 'ppcbpfselftest' into 'os-build'" (Justin M. Forbes)
* Tue Oct 05 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc4.20211005gitf6274b06e326.33]
- Fix ordering in genspec args (Justin M. Forbes)
* Sat Oct 02 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc3.20211002git53d5fc89d66a.30]
- redhat/configs: Enable Hyper-V guests on ARM64 (Vitaly Kuznetsov) [2007430]
- redhat: configs: Enable CONFIG_THINKPAD_LMI (Hans de Goede)
- redhat/docs: update Koji link to avoid redirect (Joel Savitz)
- redhat: add support for different profiles with dist*-brew (Herton R. Krzesinski)
- Fix BPF selftests build on ppc64 (Justin M. Forbes)
- redhat: configs: Disable xtables and ipset (Phil Sutter) [1945179]
- redhat: Add mark_driver_deprecated() (Phil Sutter) [1945179]
* Fri Oct 01 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc3.20211001git4de593fb965f.29]
- Change s390x CONFIG_NODES_SHIFT from 4 to 1 (Justin M. Forbes)
- Build CRYPTO_SHA3_*_S390 inline for s390 zfcpdump (Justin M. Forbes)
- redhat: move the DIST variable setting to Makefile.variables (Herton R. Krzesinski)
- redhat/kernel.spec.template: Cleanup source numbering (Prarit Bhargava)
- redhat/kernel.spec.template: Reorganize RHEL and Fedora specific files (Prarit Bhargava)
- redhat/kernel.spec.template: Add include_fedora and include_rhel variables (Prarit Bhargava)
- redhat/Makefile: Make kernel-local global (Prarit Bhargava)
- redhat/Makefile: Use flavors file (Prarit Bhargava)
- Turn on CONFIG_CPU_FREQ_GOV_SCHEDUTIL for x86 (Justin M. Forbes)
* Thu Sep 30 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc3.20210930git02d5e016800d.28]
- redhat/configs: Remove CONFIG_INFINIBAND_I40IW (Kamal Heib)
* Wed Sep 29 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc3.20210929gita4e6f95a891a.27]
- cleanup CONFIG_X86_PLATFORM_DRIVERS_INTEL (David Arcari)
- redhat: rename usage of .rhel8git.mk to .rhpkg.mk (Herton R. Krzesinski)
* Tue Sep 28 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc3.20210928git0513e464f900.26]
- Manually add pending items that need to be set due to mismatch (Justin M. Forbes)
- Clean up pending common (Justin M. Forbes)
- redhat/configs: Enable CONFIG_BLK_CGROUP_IOLATENCY & CONFIG_BLK_CGROUP_FC_APPID (Waiman Long) [2006813]
- redhat: remove kernel.changelog-8.99 file (Herton R. Krzesinski)
* Thu Sep 23 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc2.20210923git58e2cf5d7946.21]
- redhat/configs: enable CONFIG_SQUASHFS_ZSTD which is already enabled in Fedora 34 (Tao Liu) [1998953]
* Sat Sep 18 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.15-0.rc1.20210918git4357f03d6611.16]
- redhat: bump RHEL_MAJOR and add the changelog file for it (Herton R. Krzesinski)
- redhat: add documentation about the os-build rebase process (Herton R. Krzesinski)
# The following bit is important for automation so please do not remove
# END OF CHANGELOG
###
# The following Emacs magic makes C-c C-e use UTC dates.
# Local Variables:
# rpm-change-log-uses-utc: t
# End:
###