71 lines
2.3 KiB
Diff
71 lines
2.3 KiB
Diff
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
|
|
index 2209620..659c1bb 100644
|
|
--- a/drivers/tty/serial/8250/8250.c
|
|
+++ b/drivers/tty/serial/8250/8250.c
|
|
@@ -7,6 +7,9 @@
|
|
*
|
|
* Copyright (C) 2001 Russell King.
|
|
*
|
|
+ * 2005/09/16: Enabled higher baud rates for 16C95x.
|
|
+ * (Mathias Adam <a2@adamis.de>)
|
|
+ *
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
@@ -2227,6 +2230,14 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
|
|
else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
|
|
baud == (port->uartclk/8))
|
|
quot = 0x8002;
|
|
+ /*
|
|
+ * For 16C950s UART_TCR is used in combination with divisor==1
|
|
+ * to achieve baud rates up to baud_base*4.
|
|
+ */
|
|
+ else if ((port->type == PORT_16C950) &&
|
|
+ baud > (port->uartclk/16))
|
|
+ quot = 1;
|
|
+
|
|
else
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
@@ -2240,7 +2251,7 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct uart_8250_port *up = (struct uart_8250_port *)port;
|
|
unsigned char cval, fcr = 0;
|
|
unsigned long flags;
|
|
- unsigned int baud, quot;
|
|
+ unsigned int baud, quot, max_baud;
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
@@ -2272,9 +2283,10 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
+ max_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 : port->uartclk/16);
|
|
baud = uart_get_baud_rate(port, termios, old,
|
|
port->uartclk / 16 / 0xffff,
|
|
- port->uartclk / 16);
|
|
+ max_baud);
|
|
quot = serial8250_get_divisor(port, baud);
|
|
|
|
/*
|
|
@@ -2311,6 +2323,19 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
/*
|
|
+ * 16C950 supports additional prescaler ratios between 1:16 and 1:4
|
|
+ * thus increasing max baud rate to uartclk/4.
|
|
+ */
|
|
+ if (up->port.type == PORT_16C950) {
|
|
+ if (baud == port->uartclk/4)
|
|
+ serial_icr_write(up, UART_TCR, 0x4);
|
|
+ else if (baud == port->uartclk/8)
|
|
+ serial_icr_write(up, UART_TCR, 0x8);
|
|
+ else
|
|
+ serial_icr_write(up, UART_TCR, 0);
|
|
+ }
|
|
+
|
|
+ /*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|