x86, amd: factor out MMCONFIG discovery This factors out the AMD native MMCONFIG discovery so we can use it outside amd_bus.c. amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the PCI resources. We may also need the MMCONFIG information to work around BIOS defects in the ACPI MCFG table. Signed-off-by: Bjorn Helgaas --- a/arch/x86/include/asm/amd_nb.h +++ a/arch/x86/include/asm/amd_nb.h @@ -13,6 +13,7 @@ extern const struct pci_device_id amd_nb_misc_ids[]; extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[]; extern bool early_is_amd_nb(u32 value); +extern void amd_get_mmconfig_range(u64 *start, u64 *end); extern int amd_cache_northbridges(void); extern void amd_flush_garts(void); extern int amd_numa_init(void); --- a/arch/x86/kernel/amd_nb.c +++ a/arch/x86/kernel/amd_nb.c @@ -119,6 +119,38 @@ bool __init early_is_amd_nb(u32 device) return false; } +void amd_get_mmconfig_range(u64 *start, u64 *end) +{ + u32 address; + u64 base, msr; + unsigned segn_busn_bits; + + *start = 0; + *end = 0; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return; + + /* assume all cpus from fam10h have mmconfig */ + if (boot_cpu_data.x86 < 0x10) + return; + + address = MSR_FAM10H_MMIO_CONF_BASE; + rdmsrl(address, msr); + + /* mmconfig is not enabled */ + if (!(msr & FAM10H_MMIO_CONF_ENABLE)) + return; + + base = msr & (FAM10H_MMIO_CONF_BASE_MASK<> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & + FAM10H_MMIO_CONF_BUSRANGE_MASK; + + *start = base; + *end = base + (1ULL<<(segn_busn_bits + 20)) - 1; +} + int amd_get_subcaches(int cpu) { struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link; --- a/arch/x86/pci/amd_bus.c +++ a/arch/x86/pci/amd_bus.c @@ -30,34 +30,6 @@ static struct pci_hostbridge_probe pci_probes[] __initdata = { { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, }; -static u64 __initdata fam10h_mmconf_start; -static u64 __initdata fam10h_mmconf_end; -static void __init get_pci_mmcfg_amd_fam10h_range(void) -{ - u32 address; - u64 base, msr; - unsigned segn_busn_bits; - - /* assume all cpus from fam10h have mmconf */ - if (boot_cpu_data.x86 < 0x10) - return; - - address = MSR_FAM10H_MMIO_CONF_BASE; - rdmsrl(address, msr); - - /* mmconfig is not enable */ - if (!(msr & FAM10H_MMIO_CONF_ENABLE)) - return; - - base = msr & (FAM10H_MMIO_CONF_BASE_MASK<> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & - FAM10H_MMIO_CONF_BUSRANGE_MASK; - - fam10h_mmconf_start = base; - fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; -} - #define RANGE_NUM 16 /** @@ -85,6 +57,8 @@ static int __init early_fill_mp_bus_info(void) u64 val; u32 address; bool found; + u64 fam10h_mmconf_start; + u64 fam10h_mmconf_end; if (!early_pci_allowed()) return -1; @@ -211,7 +185,7 @@ static int __init early_fill_mp_bus_info(void) subtract_range(range, RANGE_NUM, 0, end); /* get mmconfig */ - get_pci_mmcfg_amd_fam10h_range(); + amd_get_mmconfig_range(&fam10h_mmconf_start, &fam10h_mmconf_end); /* need to take out mmconf range */ if (fam10h_mmconf_end) { printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB Some Dell BIOSes have MCFG tables that don't report the entire MMCONFIG area claimed by the chipset. If we move PCI devices into that claimed-but-unreported area, they don't work. This quirk reads the AMD MMCONFIG MSRs and adds PNP0C01 resources as needed to cover the entire area. Example problem scenario: BIOS-e820: 00000000cfec5400 - 00000000d4000000 (reserved) Fam 10h mmconf [d0000000, dfffffff] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xd0000000-0xd3ffffff] (base 0xd0000000) pnp 00:0c: [mem 0xd0000000-0xd3ffffff] pci 0000:00:12.0: reg 10: [mem 0xffb00000-0xffb00fff] pci 0000:00:12.0: no compatible bridge window for [mem 0xffb00000-0xffb00fff] pci 0000:00:12.0: BAR 0: assigned [mem 0xd4000000-0xd40000ff] Reported-by: Lisa Salimbas Reported-by: References: https://bugzilla.kernel.org/show_bug.cgi?id=31602 References: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/647043 References: https://bugzilla.redhat.com/show_bug.cgi?id=770308 Cc: stable@kernel.org # 2.6.34+ Signed-off-by: Bjorn Helgaas --- a/drivers/pnp/quirks.c +++ a/drivers/pnp/quirks.c @@ -295,6 +295,46 @@ static void quirk_system_pci_resources(struct pnp_dev *dev) } } +#ifdef CONFIG_AMD_NB + +#include + +static void quirk_amd_mmconfig_area(struct pnp_dev *dev) +{ + u64 mmconfig_start, mmconfig_end; + resource_size_t start, end; + struct pnp_resource *pnp_res; + struct resource *res; + + amd_get_mmconfig_range(&mmconfig_start, &mmconfig_end); + if (!mmconfig_end) + return; + + list_for_each_entry(pnp_res, &dev->resources, list) { + res = &pnp_res->res; + if (res->end < mmconfig_start || res->start > mmconfig_end || + (res->start == mmconfig_start && res->end == mmconfig_end)) + continue; + + dev_warn(&dev->dev, FW_BUG + "%pR covers only part of AMD MMCONFIG area [mem %#010llx-%#010llx]; adding more reservations\n", + res, (unsigned long long) mmconfig_start, + (unsigned long long) mmconfig_end); + if (mmconfig_start < res->start) { + start = mmconfig_start; + end = res->start - 1; + pnp_add_mem_resource(dev, start, end, 0); + } + if (mmconfig_end > res->end) { + start = res->end + 1; + end = mmconfig_end; + pnp_add_mem_resource(dev, start, end, 0); + } + break; + } +} +#endif + /* * PnP Quirks * Cards or devices that need some tweaking due to incomplete resource info @@ -322,6 +362,9 @@ static struct pnp_fixup pnp_fixups[] = { /* PnP resources that might overlap PCI BARs */ {"PNP0c01", quirk_system_pci_resources}, {"PNP0c02", quirk_system_pci_resources}, +#ifdef CONFIG_AMD_NB + {"PNP0c01", quirk_amd_mmconfig_area}, +#endif {""} };