kernel-5.11.0-0.rc3.122

* Mon Jan 11 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.11.0-0.rc3.122]
- irq: export irq_check_status_bit (Levi Yun)
- Turn off vdso_install for ppc ("Justin M. Forbes")
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>

.gitignore

@@ -1,6 +1,2 @@
-clog
 *.xz
 *.bz2
-*.rpm
-*.orig
-kernel-[23].*/

0002-iwlwifi-don-t-WARN-on-bad-firmware-state.patch

@@ -1,98 +0,0 @@
-From 3efd689c41080b0d4a9cc263a51f2868e3d5a37b Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 9 Oct 2013 15:03:57 +0200
-Subject: [PATCH] iwlwifi: don't WARN on bad firmware state
-
-When we restart firmware is possible and hance firmware is marked as not
-alive, we can still get calls from mac80211. Don't WARN on in this
-situation as this triggers automatic bug reports with no valuable
-information.
-
-This extend change from:
-
-commit 8ca95995e64f5d270889badb3e449dca91106a2b
-Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-Date:   Sun Sep 15 11:37:17 2013 +0300
-
-    iwlwifi: don't WARN on host commands sent when firmware is dead
-
-which remove WARN_ONCE from one place, but those warnings are also
-triggered from other functions.
-
-Patch adds also unlikely() statement.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/iwlwifi/iwl-trans.h |   22 +++++++++++-----------
- 1 files changed, 11 insertions(+), 11 deletions(-)
-
-diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
-index 80b4750..c6bac7c 100644
---- a/drivers/net/wireless/iwlwifi/iwl-trans.h
-+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
-@@ -601,7 +601,7 @@ static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
- {
- 	int ret;
- 
--	if (trans->state != IWL_TRANS_FW_ALIVE) {
-+	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) {
- 		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
- 		return -EIO;
- 	}
-@@ -640,8 +640,8 @@ static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
- static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
- 			       struct iwl_device_cmd *dev_cmd, int queue)
- {
--	WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
--		  "%s bad state = %d", __func__, trans->state);
-+	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
-+		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
- 
- 	return trans->ops->tx(trans, skb, dev_cmd, queue);
- }
-@@ -649,16 +649,16 @@ static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
- static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
- 				     int ssn, struct sk_buff_head *skbs)
- {
--	WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
--		  "%s bad state = %d", __func__, trans->state);
-+	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
-+		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
- 
- 	trans->ops->reclaim(trans, queue, ssn, skbs);
- }
- 
- static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue)
- {
--	WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
--		  "%s bad state = %d", __func__, trans->state);
-+	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
-+		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
- 
- 	trans->ops->txq_disable(trans, queue);
- }
-@@ -669,8 +669,8 @@ static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
- {
- 	might_sleep();
- 
--	WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
--		  "%s bad state = %d", __func__, trans->state);
-+	if (unlikely((trans->state != IWL_TRANS_FW_ALIVE)))
-+		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
- 
- 	trans->ops->txq_enable(trans, queue, fifo, sta_id, tid,
- 				 frame_limit, ssn);
-@@ -685,8 +685,8 @@ static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue,
- 
- static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans)
- {
--	WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
--		  "%s bad state = %d", __func__, trans->state);
-+	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
-+		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
- 
- 	return trans->ops->wait_tx_queue_empty(trans);
- }
--- 
-1.7.1
-

Input-evdev-fall-back-to-vmalloc-for-client-event-buffer.patch

@@ -1,64 +0,0 @@
-From 92eb77d0ffbaa71b501a0a8dabf09a351bf4267f Mon Sep 17 00:00:00 2001
-From: Daniel Stone <daniel@fooishbar.org>
-Date: Thu, 31 Oct 2013 07:25:34 +0000
-Subject: Input: evdev - fall back to vmalloc for client event buffer
-
-evdev always tries to allocate the event buffer for clients using
-kzalloc rather than vmalloc, presumably to avoid mapping overhead where
-possible.  However, drivers like bcm5974, which claims support for
-reporting 16 fingers simultaneously, can have an extraordinarily large
-buffer.  The resultant contiguous order-4 allocation attempt fails due
-to fragmentation, and the device is thus unusable until reboot.
-
-Try kzalloc if we can to avoid the mapping overhead, but if that fails,
-fall back to vzalloc.
-
-Signed-off-by: Daniel Stone <daniels@collabora.com>
-Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
----
-diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
-index b6ded17..a06e125 100644
---- a/drivers/input/evdev.c
-+++ b/drivers/input/evdev.c
-@@ -18,6 +18,8 @@
- #include <linux/poll.h>
- #include <linux/sched.h>
- #include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mm.h>
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/input/mt.h>
-@@ -369,7 +371,11 @@ static int evdev_release(struct inode *inode, struct file *file)
- 	mutex_unlock(&evdev->mutex);
- 
- 	evdev_detach_client(evdev, client);
--	kfree(client);
-+
-+	if (is_vmalloc_addr(client))
-+		vfree(client);
-+	else
-+		kfree(client);
- 
- 	evdev_close_device(evdev);
- 
-@@ -389,12 +395,14 @@ static int evdev_open(struct inode *inode, struct file *file)
- {
- 	struct evdev *evdev = container_of(inode->i_cdev, struct evdev, cdev);
- 	unsigned int bufsize = evdev_compute_buffer_size(evdev->handle.dev);
-+	unsigned int size = sizeof(struct evdev_client) +
-+					bufsize * sizeof(struct input_event);
- 	struct evdev_client *client;
- 	int error;
- 
--	client = kzalloc(sizeof(struct evdev_client) +
--				bufsize * sizeof(struct input_event),
--			 GFP_KERNEL);
-+	client = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
-+	if (!client)
-+		client = vzalloc(size);
- 	if (!client)
- 		return -ENOMEM;
- 
---
-cgit v0.9.2

Makefile

@@ -1,129 +0,0 @@
-# Makefile for source rpm: kernel
-SPECFILE := kernel.spec
-
-# we only check the .sign signatures
-UPSTREAM_CHECKS = sign
-
-.PHONY: help
-help:
-%:
-	@echo "Try fedpkg $@ or something like that"
-	@exit 1
-
-include Makefile.config
-
-prep:
-	fedpkg -v prep
-
-noarch:
-	fedpkg -v local --arch=noarch
-
-# 'make local' also needs to build the noarch firmware package
-local: noarch
-	fedpkg -v local
-
-extremedebug:
-	@perl -pi -e 's/# CONFIG_DEBUG_PAGEALLOC is not set/CONFIG_DEBUG_PAGEALLOC=y/' config-nodebug
-
-debug:
-	@perl -pi -e 's/# CONFIG_SLUB_DEBUG_ON is not set/CONFIG_SLUB_DEBUG_ON=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_LOCK_STAT is not set/CONFIG_LOCK_STAT=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_STACK_USAGE is not set/CONFIG_DEBUG_STACK_USAGE=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_SLAB is not set/CONFIG_DEBUG_SLAB=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_MUTEXES is not set/CONFIG_DEBUG_MUTEXES=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set/CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_RT_MUTEXES is not set/CONFIG_DEBUG_RT_MUTEXES=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_LOCK_ALLOC is not set/CONFIG_DEBUG_LOCK_ALLOC=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_PROVE_LOCKING is not set/CONFIG_PROVE_LOCKING=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_PROVE_RCU is not set/CONFIG_PROVE_RCU=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_SPINLOCK is not set/CONFIG_DEBUG_SPINLOCK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_VM is not set/CONFIG_DEBUG_VM=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAULT_INJECTION is not set/CONFIG_FAULT_INJECTION=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAILSLAB is not set/CONFIG_FAILSLAB=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_PAGE_ALLOC is not set/CONFIG_FAIL_PAGE_ALLOC=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_IO_TIMEOUT is not set/CONFIG_FAIL_IO_TIMEOUT=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_MAKE_REQUEST is not set/CONFIG_FAIL_MAKE_REQUEST=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_MMC_REQUEST is not set/CONFIG_FAIL_MMC_REQUEST=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/CONFIG_FAULT_INJECTION_DEBUG_FS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_WRITECOUNT is not set/CONFIG_DEBUG_WRITECOUNT=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS is not set/CONFIG_DEBUG_OBJECTS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_FREE is not set/CONFIG_DEBUG_OBJECTS_FREE=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/CONFIG_DEBUG_OBJECTS_TIMERS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_WORK is not set/CONFIG_DEBUG_OBJECTS_WORK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_X86_PTDUMP is not set/CONFIG_X86_PTDUMP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CAN_DEBUG_DEVICES is not set/CONFIG_CAN_DEBUG_DEVICES=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_MODULE_FORCE_UNLOAD is not set/CONFIG_MODULE_FORCE_UNLOAD=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/CONFIG_SYSCTL_SYSCALL_CHECK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_NOTIFIERS is not set/CONFIG_DEBUG_NOTIFIERS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DMA_API_DEBUG is not set/CONFIG_DMA_API_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic
-	@perl -pi -e 's/# CONFIG_PM_ADVANCED_DEBUG is not set/CONFIG_PM_ADVANCED_DEBUG=y/' config-generic
-	@perl -pi -e 's/# CONFIG_B43_DEBUG is not set/CONFIG_B43_DEBUG=y/' config-generic
-	@perl -pi -e 's/# CONFIG_B43LEGACY_DEBUG is not set/CONFIG_B43LEGACY_DEBUG=y/' config-generic
-	@perl -pi -e 's/# CONFIG_MMIOTRACE is not set/CONFIG_MMIOTRACE=y/' config-nodebug
-	@perl -pi -e 's/CONFIG_STRIP_ASM_SYMS=y/# CONFIG_STRIP_ASM_SYMS is not set/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_CREDENTIALS is not set/CONFIG_DEBUG_CREDENTIALS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_ACPI_DEBUG is not set/CONFIG_ACPI_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_EXT4_DEBUG is not set/CONFIG_EXT4_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/CONFIG_DEBUG_PERF_USE_VMALLOC=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_JBD2_DEBUG is not set/CONFIG_JBD2_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_NFSD_FAULT_INJECTION is not set/CONFIG_NFSD_FAULT_INJECTION=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_BLK_CGROUP is not set/CONFIG_DEBUG_BLK_CGROUP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DRBD_FAULT_INJECTION is not set/CONFIG_DRBD_FAULT_INJECTION=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_ATH_DEBUG is not set/CONFIG_ATH_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CARL9170_DEBUGFS is not set/CONFIG_CARL9170_DEBUGFS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/CONFIG_IWLWIFI_DEVICE_TRACING=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DMADEVICES_DEBUG is not set/CONFIG_DMADEVICES_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DMADEVICES_VDEBUG is not set/CONFIG_DMADEVICES_VDEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/CONFIG_CEPH_LIB_PRETTYDEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_QUOTA_DEBUG is not set/CONFIG_QUOTA_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_KGDB_KDB is not set/CONFIG_KGDB_KDB=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_KDB_KEYBOARD is not set/CONFIG_KDB_KEYBOARD=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_PER_CPU_MAPS is not set/CONFIG_DEBUG_PER_CPU_MAPS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_TEST_LIST_SORT is not set/CONFIG_TEST_LIST_SORT=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/CONFIG_DEBUG_ATOMIC_SLEEP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DETECT_HUNG_TASK is not set/CONFIG_DETECT_HUNG_TASK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_KMEMLEAK is not set/CONFIG_DEBUG_KMEMLEAK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/' config-nodebug
-
-	@# just in case we're going from extremedebug -> debug
-	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
-
-	@perl -pi -e 's/# CONFIG_MAXSMP is not set/CONFIG_MAXSMP=y/' config-x86-generic
-
-	@# Try out UAS in rawhide builds.
-	@perl -pi -e 's/# CONFIG_USB_UAS is not set/CONFIG_USB_UAS=m/' config-generic
-
-	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
-	@perl -pi -e 's/^%define rawhide_skip_docs 0/%define rawhide_skip_docs 1/' kernel.spec
-	@rpmdev-bumpspec -c "Reenable debugging options." kernel.spec
-
-nodebuginfo:
-	@perl -pi -e 's/^%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 1\}/%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 0\}/' kernel.spec
-nodebug: release
-	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
-release: config-release
-	@perl -pi -e 's/^%define debugbuildsenabled 0/%define debugbuildsenabled 1/' kernel.spec
-	@perl -pi -e 's/^%define rawhide_skip_docs 1/%define rawhide_skip_docs 0/' kernel.spec
-	@rpmdev-bumpspec -c "Disable debugging options." kernel.spec
-
-include Makefile.release
-
-unused-kernel-patches:
-	@for f in *.patch; do if [ -e $$f ]; then (egrep -q "^Patch[[:digit:]]+:[[:space:]]+$$f" $(SPECFILE) || echo "Unused:    $$f") && egrep -q "^ApplyPatch[[:space:]]+$$f|^ApplyOptionalPatch[[:space:]]+$$f" $(SPECFILE) || echo "Unapplied: $$f"; fi; done
-
-ifeq ($(MAKECMDGOALS),me a sandwich)
-.PHONY: me a sandwich
-me a:
-	@:
-
-sandwich:
-	@[ `id -u` -ne 0 ] && echo "What? Make it yourself." || echo Okay.
-endif

Makefile.config

@@ -1,135 +0,0 @@
-# Make rules for configuration files.
-#
-# $Id$
-
-CFG		= kernel-$(VERSION)
-
-CONFIGFILES	= \
-	$(CFG)-i686.config $(CFG)-i686-debug.config \
-	$(CFG)-i686-PAE.config $(CFG)-i686-PAEdebug.config \
-	$(CFG)-x86_64.config $(CFG)-x86_64-debug.config \
-	$(CFG)-s390x.config \
-	$(CFG)-armv7hl.config $(CFG)-armv7hl-lpae.config \
-	$(CFG)-aarch64.config \
-	$(CFG)-ppc.config $(CFG)-ppc-smp.config \
-	$(CFG)-ppc64.config $(CFG)-ppc64p7.config $(CFG)-ppc64-debug.config 
-
-PLATFORMS	= x86 x86_64 powerpc powerpc32 powerpc64 s390x arm arm64
-TEMPFILES	= $(addprefix temp-, $(addsuffix -generic, $(PLATFORMS)))
-
-configs: $(CONFIGFILES)
-	@rm -f kernel-*-config
-	@rm -f $(TEMPFILES)
-	@rm -f temp-generic temp-*-generic temp-*-generic-tmp
-
-# Augment the clean target to clean up our own cruft
-clean ::
-	@rm -fv $(CONFIGFILES) $(TEMPFILES) temp-generic kernel-$(VERSION)*config
-
-temp-generic: config-generic
-	cat config-generic config-nodebug > temp-generic
-
-temp-debug-generic: config-generic
-	cat config-generic config-debug > temp-debug-generic
-
-temp-no-extra-generic: config-no-extra temp-generic
-	perl merge.pl $^ > $@
-
-temp-arm-generic: config-arm-generic temp-no-extra-generic
-	perl merge.pl $^ > $@
-
-temp-armv7-generic: config-armv7-generic temp-arm-generic
-	perl merge.pl $^ > $@
-
-temp-armv7: config-armv7 temp-armv7-generic
-	perl merge.pl $^ > $@
-
-temp-armv7-lpae: config-armv7-lpae temp-armv7-generic
-	perl merge.pl $^ > $@
-
-temp-arm-debug-generic: temp-arm-generic temp-debug-generic
-	perl merge.pl $^ > $@
-
-temp-arm64: config-arm64 temp-arm-generic
-	perl merge.pl $^ > $@
-
-temp-arm64-debug: config-arm64 temp-arm-debug-generic
-	perl merge.pl $^ > $@
-
-temp-x86-32: config-x86-32-generic config-x86-generic
-	perl merge.pl $^  > $@
-
-temp-x86-32-generic: temp-x86-32 temp-generic
-	perl merge.pl $^  > $@
-
-temp-x86-debug-generic: temp-x86-32 temp-debug-generic
-	perl merge.pl $^  > $@
-
-temp-x86-64: config-x86_64-generic config-x86-generic
-	perl merge.pl $^  > $@
-
-temp-x86_64-generic: temp-x86-64 temp-generic
-	perl merge.pl $^  > $@
-
-temp-x86_64-debug-generic: temp-x86-64 temp-debug-generic
-	perl merge.pl $^  > $@
-
-temp-powerpc-generic: config-powerpc-generic temp-generic
-	perl merge.pl $^  > $@
-
-temp-powerpc-debug-generic: config-powerpc-generic temp-debug-generic
-	perl merge.pl $^  > $@
-
-temp-powerpc32-generic: config-powerpc32-generic temp-powerpc-generic
-	perl merge.pl $^  > $@
-
-temp-powerpc64-generic: config-powerpc64 temp-powerpc-generic
-	perl merge.pl $^ > $@
-
-temp-s390-generic: config-s390x temp-generic
-	perl merge.pl $^ > $@
-
-$(CFG)-i686-PAE.config: config-i686-PAE temp-x86-32-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-i686-PAEdebug.config: config-i686-PAE temp-x86-debug-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-i686.config: /dev/null temp-x86-32-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-i686-debug.config: /dev/null temp-x86-debug-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-x86_64.config: /dev/null temp-x86_64-generic
-	perl merge.pl $^ x86_64 > $@
-
-$(CFG)-x86_64-debug.config: /dev/null temp-x86_64-debug-generic
-	perl merge.pl $^ x86_64 > $@
-
-$(CFG)-ppc64.config: /dev/null temp-powerpc64-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc64-debug.config: temp-powerpc64-generic temp-powerpc-debug-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc64p7.config: config-powerpc64p7 temp-powerpc64-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-s390x.config: config-s390x temp-s390-generic
-	perl merge.pl $^ s390 > $@
-
-$(CFG)-armv7hl.config: /dev/null temp-armv7
-	perl merge.pl $^ arm > $@
-
-$(CFG)-armv7hl-lpae.config: /dev/null temp-armv7-lpae
-	perl merge.pl $^ arm > $@
-
-$(CFG)-aarch64.config: /dev/null temp-arm64
-	perl merge.pl $^ arm64 > $@
-
-$(CFG)-ppc.config: /dev/null temp-powerpc32-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc-smp.config: config-powerpc32-smp temp-powerpc32-generic
-	perl merge.pl $^ powerpc > $@

Makefile.release

@@ -1,91 +0,0 @@
-# Make rules for configuration files.
-#
-# $Id$
-
-# This file contains only entries that change the config files.
-# Anything that changes kernel.spec itself should go in the main Makefile.
-
-config-release:
-	@perl -pi -e 's/CONFIG_SLUB_DEBUG_ON=y/# CONFIG_SLUB_DEBUG_ON is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_LOCK_STAT=y/# CONFIG_LOCK_STAT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_STACK_USAGE=y/# CONFIG_DEBUG_STACK_USAGE is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_SLAB=y/# CONFIG_DEBUG_SLAB is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_MUTEXES=y/# CONFIG_DEBUG_MUTEXES is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y/# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_RT_MUTEXES=y/# CONFIG_DEBUG_RT_MUTEXES is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_LOCK_ALLOC=y/# CONFIG_DEBUG_LOCK_ALLOC is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_PROVE_LOCKING=y/# CONFIG_PROVE_LOCKING is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_PROVE_RCU=y/# CONFIG_PROVE_RCU is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_SPINLOCK=y/# CONFIG_DEBUG_SPINLOCK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_VM=y/# CONFIG_DEBUG_VM is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAULT_INJECTION=y/# CONFIG_FAULT_INJECTION is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAILSLAB=y/# CONFIG_FAILSLAB is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_PAGE_ALLOC=y/# CONFIG_FAIL_PAGE_ALLOC is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_IO_TIMEOUT=y/# CONFIG_FAIL_IO_TIMEOUT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_MAKE_REQUEST=y/# CONFIG_FAIL_MAKE_REQUEST is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_MMC_REQUEST=y/# CONFIG_FAIL_MMC_REQUEST is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAULT_INJECTION_DEBUG_FS=y/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_WRITECOUNT=y/# CONFIG_DEBUG_WRITECOUNT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS=y/# CONFIG_DEBUG_OBJECTS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_FREE=y/# CONFIG_DEBUG_OBJECTS_FREE is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_TIMERS=y/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_WORK=y/# CONFIG_DEBUG_OBJECTS_WORK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_X86_PTDUMP=y/# CONFIG_X86_PTDUMP is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CAN_DEBUG_DEVICES=y/# CONFIG_CAN_DEBUG_DEVICES is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_MODULE_FORCE_UNLOAD=y/# CONFIG_MODULE_FORCE_UNLOAD is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_SYSCTL_SYSCALL_CHECK=y/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_NOTIFIERS=y/# CONFIG_DEBUG_NOTIFIERS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DMA_API_DEBUG=y/# CONFIG_DMA_API_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_PM_TEST_SUSPEND=y/# CONFIG_PM_TEST_SUSPEND is not set/' config-generic
-	@perl -pi -e 's/CONFIG_PM_ADVANCED_DEBUG=y/# CONFIG_PM_ADVANCED_DEBUG is not set/' config-generic
-	@perl -pi -e 's/CONFIG_B43_DEBUG=y/# CONFIG_B43_DEBUG is not set/' config-generic
-	@perl -pi -e 's/CONFIG_B43LEGACY_DEBUG=y/# CONFIG_B43LEGACY_DEBUG is not set/' config-generic
-	@perl -pi -e 's/CONFIG_MMIOTRACE=y/# CONFIG_MMIOTRACE is not set/' config-nodebug
-	@perl -pi -e 's/# CONFIG_STRIP_ASM_SYMS is not set/CONFIG_STRIP_ASM_SYMS=y/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_CREDENTIALS=y/# CONFIG_DEBUG_CREDENTIALS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_ACPI_DEBUG=y/# CONFIG_ACPI_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_EXT4_DEBUG=y/# CONFIG_EXT4_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_PERF_USE_VMALLOC=y/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_JBD2_DEBUG=y/# CONFIG_JBD2_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_NFSD_FAULT_INJECTION=y/# CONFIG_NFSD_FAULT_INJECTION is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_BLK_CGROUP=y/# CONFIG_DEBUG_BLK_CGROUP is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DRBD_FAULT_INJECTION=y/# CONFIG_DRBD_FAULT_INJECTION is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_ATH_DEBUG=y/# CONFIG_ATH_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CARL9170_DEBUGFS=y/# CONFIG_CARL9170_DEBUGFS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_IWLWIFI_DEVICE_TRACING=y/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DMADEVICES_DEBUG=y/# CONFIG_DMADEVICES_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DMADEVICES_VDEBUG=y/# CONFIG_DMADEVICES_VDEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CEPH_LIB_PRETTYDEBUG=y/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_QUOTA_DEBUG=y/# CONFIG_QUOTA_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_PER_CPU_MAPS=y/# CONFIG_DEBUG_PER_CPU_MAPS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_TEST_LIST_SORT=y/# CONFIG_TEST_LIST_SORT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_TEST_STRING_HELPERS=m/# CONFIG_TEST_STRING_HELPERS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_ATOMIC_SLEEP=y/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DETECT_HUNG_TASK=y/# CONFIG_DETECT_HUNG_TASK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_KMEMLEAK=y/# CONFIG_DEBUG_KMEMLEAK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_MAC80211_MESSAGE_TRACING=y/# CONFIG_MAC80211_MESSAGE_TRACING is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_XFS_WARN=y/# CONFIG_XFS_WARN is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_EDAC_DEBUG=y/# CONFIG_EDAC_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_RTLWIFI_DEBUG=y/# CONFIG_RTLWIFI_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/' config-nodebug
-
-	@# Undo anything that make extremedebug might have set
-	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-debug
-	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
-
-	@# Change defaults back to sane things.
-	@perl -pi -e 's/CONFIG_MAXSMP=y/# CONFIG_MAXSMP is not set/' config-x86-generic
-
-	@# Disable UAS for release until it's ready. (#717633, #744099)
-	@perl -pi -e 's/CONFIG_USB_UAS=m/# CONFIG_USB_UAS is not set/' config-generic
-
-	@perl -pi -e 's/CONFIG_SCHEDSTATS=y/# CONFIG_SCHEDSTATS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_LATENCYTOP=y/# CONFIG_LATENCYTOP is not set/' config-nodebug
-

Makefile.rhelver

@@ -0,0 +1,45 @@
+RHEL_MAJOR = 8
+RHEL_MINOR = 99
+
+#
+# RHEL_RELEASE
+# -------------
+#
+# Represents build number in 'release' part of RPM's name-version-release.
+#   name is <package_name>, e.g. kernel
+#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
+#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+RHEL_RELEASE = 122
+
+#
+# Early y+1 numbering
+# --------------------
+#
+# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
+# First is RHEL_RELEASE inherited/merged from y as-is, second number
+# is incremented with each build starting from 1. After merge from y,
+# it resets back to 1. This way y+1 nvr reflects status of last merge.
+#
+# Example:
+#
+# rhel8.0                        rhel-8.1
+#   kernel-4.18.0-58.el8   -->     kernel-4.18.0-58.1.el8
+#                                  kernel-4.18.0-58.2.el8
+#   kernel-4.18.0-59.el8           kernel-4.18.0-59.1.el8
+#   kernel-4.18.0-60.el8
+#   kernel-4.18.0-61.el8   -->     kernel-4.18.0-61.1.el8
+#
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+EARLY_YSTREAM ?= no
+EARLY_YBUILD:=
+EARLY_YRELEASE:=
+ifneq ("$(ZSTREAM)", "yes")
+  ifeq ("$(EARLY_YSTREAM)","yes")
+    RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
+  endif
+endif

PatchList.txt

@@ -1,90 +0,0 @@
-**** Backports and patches headed/already upsteram *****************************
-
-* net-flow_dissector-fail-on-evil-iph-ihl.patch (rhbz 1007939 1025647)
-  - Should hit upstream and stable soon
-
-* rt2800usb-slow-down-TX-status-polling.patch (rhbz 984696)
-  - Still pending upstream.  Fixes https://bugzilla.kernel.org/show_bug.cgi?id=62781
-
-* btrfs-relocate-csums-properly-with-prealloc-ext.patch (rhbz 1011714)
-  - Still pending upstream
-
-* cpupower-Fix-segfault-due-to-incorrect-getopt_long-a.patch (rhbz 1000439)
-  - Queued for next upstream release I believe.  Fixes a segfault in cpupower
-
-* dm-cache-policy-mq_fix-large-scale-table-allocation-bug.patch (rhbz 993744)
-  - Still pending upstream
-
-* 0002-iwlwifi-don-t-WARN-on-bad-firmware-state.patch (rhbz 896695)
-  - Still pending upstream
-
-* vfio-iommu-Fixed-interaction-of-VFIO_IOMMU_MAP_DMA.patch (rhbz 998732)
-  - Still pending upstream
-
-* iommu-Remove-stack-trace-from-broken-irq-remapping-warning.patch (rhbz 982153)
-  - Still pending upstream
-
-* rt2800-add-support-for-rf3070.patch (rhbz 974072)
-  - Actually I'm unsure of what the upstream status on this one is.
-
-* elevator-Fix-a-race-in-elevator-switching-and-md.patch
-* elevator-acquire-q-sysfs_lock-in-elevator_change.patch (rhbz 902012)
-  - I believe these are both queued for the next upstream release
-
-* ntp-Make-periodic-RTC-update-more-reliable.patch (rhbz 985522)
-  - I believe this is queued in John Stultz's tree for 3.13
-
-* ansi_cprng-Fix-off-by-one-error-in-non-block-size-request.patch (rhbz 1007690 1009136)
-  - Fixes CVE-2013-4345
-
-* ath9k_rx_dma_stop_check.patch (rhbz 892811)
-  - Fixes some DMA issue on specific hardware.  Taken from
-https://dev.openwrt.org/browser/trunk/package/mac80211/patches/552-ath9k_rx_dma_stop_check.patch?rev=34910
-
-* secure-modules.patch
-* modsign-uefi.patch
-* sb-hibernate.patch
-* sysrq-secure-boot.patch
-  - Fedora secure boot support.
-  - Dear Matthew, this is your fault.  Run sed already and get a new set out.
-
-* keys-expand-keyring.patch
-* keys-krb-support.patch
-* keys-x509-improv.patch
-* keyring-quota.patch
-  - I believe these are all now queued for 3.13 in James Morris' tree.
-
-**** Other stuff that should go upstream (in decreasing likelyhood) ************
-
-* defaults-acpi-video.patch
-* disable-i8042-check-on-apple-mac.patch
-* no-pcspkr-modalias.patch
-* die-floppy-die.patch
-	Fedora policy decisions
-	Turn into CONFIG_ options and upstream ?
-
-* input-kill-stupid-messages.patch
-* silence-acpi-blacklist.patch
-* silence-fbcon-logo.patch
-* silence-noise.patch
-	Fedora local 'hush' patches.  (TODO: push more upstream)
-
-* makefile-after_link.patch
-  Rolandware that is used by the debuginfo generation.
-  Possibly upstreamable ?
-
-* serial-460800.patch
-	Probably not upstreamable.
-	http://marc.theaimsgroup.com/?l=linux-kernel&m=112687270832687&w=2
-	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=126403
-	http://lkml.org/lkml/2006/8/2/208
-
-********************************************************************************
-
-'MUSTARD' patches.  Fedora local patches that are very unlikely to go upstream.
-
-* crash-driver.patch
-	Unlikely to go upstream.
-	https://bugzilla.redhat.com/show_bug.cgi?id=492803
-
-********************************************************************************

Patchlist.changelog

@@ -0,0 +1,228 @@
+https://gitlab.com/cki-project/kernel-ark/-/commit/8773e8c6039ff74d1426cc80de30de759cd0c2a2
+ 8773e8c6039ff74d1426cc80de30de759cd0c2a2 irq: export irq_check_status_bit
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e187313e5f0086538fefe0925ef84480f99616d8
+ e187313e5f0086538fefe0925ef84480f99616d8 gcc-plugins: fix gcc 11 indigestion with plugins...
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc
+ 0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc Fix up bad merge with efi: generalize efi_get_secureboot
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/364788093bdf437c33753d327136c363be8f756c
+ 364788093bdf437c33753d327136c363be8f756c Fix up a merge issue with rxe.c
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/a4d554ce883e24df77cce42bc2deec527028c213
+ a4d554ce883e24df77cce42bc2deec527028c213 Filter out LTO build options from the perl ccopts
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/17b0f7f1d49df30661b517d668715ff5ee1bab09
+ 17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e7c009cd91ababdbb5f726ef592c7800f0682d3a
+ e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7120b2a26fc4c7954fd0395973dc6739c110e091
+ 7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7a28e2fde653a161913abb8eee943cdacb5ff2ae
+ 7a28e2fde653a161913abb8eee943cdacb5ff2ae x86: Fix compile issues with rh_check_supported()
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/45f64c1a24e73af7987cffec3ea941e29364f87f
+ 45f64c1a24e73af7987cffec3ea941e29364f87f e1000e: bump up timeout to wait when ME un-configure ULP mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6c14763b1ce98698949ff45135c15e333aa6416d
+ 6c14763b1ce98698949ff45135c15e333aa6416d drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/67a19b16012b12cffba0b515c6503e5f8cdbb798
+ 67a19b16012b12cffba0b515c6503e5f8cdbb798 drm: panel: add Xingbangda XBD599 panel
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/d220dbf98cef820367b5a2a2eeaacebee958bdd4
+ d220dbf98cef820367b5a2a2eeaacebee958bdd4 dt-bindings: panel: add binding for Xingbangda XBD599 panel
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/80660062260dec4bdca9540922577542c16145e8
+ 80660062260dec4bdca9540922577542c16145e8 ARM: fix __get_user_check() in case uaccess_* calls are not inlined
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/24d8743613b2a6a585fc68cfe95078d9a3d5b389
+ 24d8743613b2a6a585fc68cfe95078d9a3d5b389 mm/kmemleak: skip late_init if not skip disable
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/b697ff5e26974fee8fcd31a1e221e9dd41515efc
+ b697ff5e26974fee8fcd31a1e221e9dd41515efc KEYS: Make use of platform keyring for module signature verify
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/081d2185e22479b449586c4e9843602ca0d49806
+ 081d2185e22479b449586c4e9843602ca0d49806 Drop that for now
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5ef51389cf6673a0e9e004909c7be1dc785050b2
+ 5ef51389cf6673a0e9e004909c7be1dc785050b2 Input: rmi4 - remove the need for artificial IRQ in case of HID
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/c1788012ebf8de46e9dc80d18051ed0c77c811b6
+ c1788012ebf8de46e9dc80d18051ed0c77c811b6 ARM: tegra: usb no reset
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/577365feaa909db4c0949eabfcda7e4a972b8e54
+ 577365feaa909db4c0949eabfcda7e4a972b8e54 arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/331be9c5a436057ee852075c102d9d90a9046a30
+ 331be9c5a436057ee852075c102d9d90a9046a30 redhat: rh_kabi: deduplication friendly structs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/34d79fbfb327f732ebf3ece4db21a14f81fedf03
+ 34d79fbfb327f732ebf3ece4db21a14f81fedf03 redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07
+ 93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07 redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/8e5c06356457f5351289e9f687b991189d163dae
+ 8e5c06356457f5351289e9f687b991189d163dae redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/212cbccda77cc81fcb60123907eabdac8ad5adb7
+ 212cbccda77cc81fcb60123907eabdac8ad5adb7 redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6f7744b412e1fb86a67d8761e64df69cf891b4ad
+ 6f7744b412e1fb86a67d8761e64df69cf891b4ad redhat: rh_kabi: Add macros to size and extend structs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/049623d33998be30d79692c69b34acb502c496e3
+ 049623d33998be30d79692c69b34acb502c496e3 Removing Obsolete hba pci-ids from rhel8
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/43ef1d631ecfe84084db3572c9ed1bedbdceb0f8
+ 43ef1d631ecfe84084db3572c9ed1bedbdceb0f8 mptsas: pci-id table changes
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e5726695109dd1a73da92487b75de6a51d54c015
+ e5726695109dd1a73da92487b75de6a51d54c015 mptsas: Taint kernel if mptsas is loaded
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16
+ ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16 mptspi: pci-id table changes
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/bd305f716d8b64be1926bc7aebe02468ac6bf599
+ bd305f716d8b64be1926bc7aebe02468ac6bf599 qla2xxx: Remove PCI IDs of deprecated adapter
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/803ff9a2c660c094e14d246ef05019bf6008d503
+ 803ff9a2c660c094e14d246ef05019bf6008d503 be2iscsi: remove unsupported device IDs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2cb24399321f555f18b0804d3fe02cf53949fba1
+ 2cb24399321f555f18b0804d3fe02cf53949fba1 mptspi: Taint kernel if mptspi is loaded
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ad1740551ff4af49f1ef10a130783d9369e955a0
+ ad1740551ff4af49f1ef10a130783d9369e955a0 hpsa: remove old cciss-based smartarray pci ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/4197ba3e766656eea9175c11ed05903620d98a28
+ 4197ba3e766656eea9175c11ed05903620d98a28 qla4xxx: Remove deprecated PCI IDs from RHEL 8
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7e285aec22ab1213639afda877902db363473cb0
+ 7e285aec22ab1213639afda877902db363473cb0 aacraid: Remove depreciated device and vendor PCI id's
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/846109a16be92155e69731c36dde48761d375153
+ 846109a16be92155e69731c36dde48761d375153 megaraid_sas: remove deprecated pci-ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6fd2019d01cee7ff36dc047d3ecdb504b968f222
+ 6fd2019d01cee7ff36dc047d3ecdb504b968f222 mpt*: remove certain deprecated pci-ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/dddcd5c1129b275ff160324036a662739db51fc3
+ dddcd5c1129b275ff160324036a662739db51fc3 kernel: add SUPPORT_REMOVED kernel taint
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/08d77161dba915d1ed0d9fede658085440ab4474
+ 08d77161dba915d1ed0d9fede658085440ab4474 Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e2dc2ca6a25a445bf22ceb6a8e38e02706605341
+ e2dc2ca6a25a445bf22ceb6a8e38e02706605341 Add option of 13 for FORCE_MAX_ZONEORDER
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2384646bf71d8c282cf49bb20321fdf802c61cce
+ 2384646bf71d8c282cf49bb20321fdf802c61cce s390: Lock down the kernel when the IPL secure flag is set
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5850c93175b9d2e1081873f4bbe08dead202cb08
+ 5850c93175b9d2e1081873f4bbe08dead202cb08 efi: Lock down the kernel if booted in secure boot mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/53250b991f841be025fa4d264850dadc0fae2861
+ 53250b991f841be025fa4d264850dadc0fae2861 efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/72223fd1241cc5c70b96a491db14d54c83beadd8
+ 72223fd1241cc5c70b96a491db14d54c83beadd8 security: lockdown: expose a hook to lock the kernel down
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7ba28f03674fa9346610c3fea7fc93bc58f06d2a
+ 7ba28f03674fa9346610c3fea7fc93bc58f06d2a Make get_cert_list() use efi_status_to_str() to print error messages.
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2ae9082db0b54d831a9b3782c049d9917e37d89f
+ 2ae9082db0b54d831a9b3782c049d9917e37d89f Add efi_status_to_str() and rework efi_status_to_err().
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cee1461ada1b7e4b92cd154e7ec241119afcd644
+ cee1461ada1b7e4b92cd154e7ec241119afcd644 Add support for deprecating processors
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2420149f8f5fa9dd1e2dc793765b498022922a81
+ 2420149f8f5fa9dd1e2dc793765b498022922a81 arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/1d69b30b98b60aff639351f5788d20a3b17f6e27
+ 1d69b30b98b60aff639351f5788d20a3b17f6e27 iommu/arm-smmu: workaround DMA mode issues
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6b2e73e508e7a117b1db91596097c00e5570f64a
+ 6b2e73e508e7a117b1db91596097c00e5570f64a rh_kabi: introduce RH_KABI_EXCLUDE
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ecb9206bce179eb600c52642a6753012a69ce4a2
+ ecb9206bce179eb600c52642a6753012a69ce4a2 ipmi: do not configure ipmi for HPE m400
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/473be59fe72afa9969cf8d10609ef3f14f594631
+ 473be59fe72afa9969cf8d10609ef3f14f594631 IB/rxe: Mark Soft-RoCE Transport driver as tech-preview
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/b94117795261f9c074a7addca2252238871b5081
+ b94117795261f9c074a7addca2252238871b5081 scsi: smartpqi: add inspur advantech ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cae871558c333880c1687cab6f2a71accf40d105
+ cae871558c333880c1687cab6f2a71accf40d105 ice: mark driver as tech-preview
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7d9cb007404211ea6638bde4a28dd0fbe8d95de0
+ 7d9cb007404211ea6638bde4a28dd0fbe8d95de0 kABI: Add generic kABI macros to use for kABI workarounds
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/bd353e9aae8877dd490e6c92b67849e0dcfbab25
+ bd353e9aae8877dd490e6c92b67849e0dcfbab25 add pci_hw_vendor_status()
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/41a259999969bbdfe9f556ce71f2c3c07d7454f4
+ 41a259999969bbdfe9f556ce71f2c3c07d7454f4 ahci: thunderx2: Fix for errata that affects stop engine
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2a107343529ce648c11bff62e9f72bbeec738f3f
+ 2a107343529ce648c11bff62e9f72bbeec738f3f Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/03e48a48f400a51a182a1254cf22ff0c08706d76
+ 03e48a48f400a51a182a1254cf22ff0c08706d76 bpf: Add tech preview taint for syscall
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/607f0e89af7ef5682f79f2eea0a99638a1bc0c4f
+ 607f0e89af7ef5682f79f2eea0a99638a1bc0c4f bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/31da227877eb734ddb484bc519aae85ce200802e
+ 31da227877eb734ddb484bc519aae85ce200802e add Red Hat-specific taint flags
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7a2e2c83be0230667756cccb5bc3687419dfbb8b
+ 7a2e2c83be0230667756cccb5bc3687419dfbb8b kdump: fix a grammar issue in a kernel message
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/d345d54d33e7d496c9d845e4723550dd37cb3f88
+ d345d54d33e7d496c9d845e4723550dd37cb3f88 tags.sh: Ignore redhat/rpm
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0
+ 5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0 put RHEL info into generated headers
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ce12884c009ec3bed11100c9d19f6d97628cf8ae
+ ce12884c009ec3bed11100c9d19f6d97628cf8ae kdump: add support for crashkernel=auto
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/18fb1389afccdc5535977a10669b49a37829b55a
+ 18fb1389afccdc5535977a10669b49a37829b55a kdump: round up the total memory size to 128M for crashkernel reservation
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5fb9821441cc0b77101ad9c0dfaa747957a4cce4
+ 5fb9821441cc0b77101ad9c0dfaa747957a4cce4 acpi: prefer booting with ACPI over DTS
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/0cf21a40db6fca5d89cf3d65808117c8c14e524e
+ 0cf21a40db6fca5d89cf3d65808117c8c14e524e aarch64: acpi scan: Fix regression related to X-Gene UARTs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/de13e14cc2388478d9a2c68c5d90affd92098f11
+ de13e14cc2388478d9a2c68c5d90affd92098f11 ACPI / irq: Workaround firmware issue on X-Gene based m400
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/71c098f4afa38a15a95495c14f71fb087ab27308
+ 71c098f4afa38a15a95495c14f71fb087ab27308 modules: add rhelversion MODULE_INFO tag
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/3247f9c838f4aa91aa5d08c152b385d61554d4b5
+ 3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e80982feaa68226ff60d2f83dace2016c35270d3
+ e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2987f9a606df106f5bdfa4113eb55356a21085a6
+ 2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/a99885a5e77af594dfdce586cc83e5911d8401ce
+ a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cd3a5d30570279538623ea8a1255db0ee4b728f7
+ cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile
+

README.rst

@@ -0,0 +1,25 @@
+===================
+The Kernel dist-git
+===================
+
+The kernel is maintained in a `source tree`_ rather than directly in dist-git.
+The specfile is maintained as a `template`_ in the source tree along with a set
+of build scripts to generate configurations, (S)RPMs, and to populate the
+dist-git repository.
+
+The `documentation`_ for the source tree covers how to contribute and maintain
+the tree.
+
+If you're looking for the downstream patch set it's available in the source
+tree with "git log master..ark-patches" or
+`online`_.
+
+Each release in dist-git is tagged in the source repository so you can easily
+check out the source tree for a build. The tags are in the format
+name-version-release, but note release doesn't contain the dist tag since the
+source can be built in different build roots (Fedora, CentOS, etc.)
+
+.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
+.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
+.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
+.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

README.txt

@@ -1,82 +0,0 @@
-
-		Kernel package tips & tricks.
-		~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The kernel is one of the more complicated packages in the distro, and
-for the newcomer, some of the voodoo in the spec file can be somewhat scary.
-This file attempts to document some of the magic.
-
-
-Speeding up make prep
----------------------
-The kernel is nearly 500MB of source code, and as such, 'make prep'
-takes a while. The spec file employs some trickery so that repeated
-invocations of make prep don't take as long.  Ordinarily the %prep
-phase of a package will delete the tree it is about to untar/patch.
-The kernel %prep keeps around an unpatched version of the tree,
-and makes a symlink tree clone of that clean tree and than applies
-the patches listed in the spec to the symlink tree.
-This makes a huge difference if you're doing multiple make preps a day.
-As an added bonus, doing a diff between the clean tree and the symlink
-tree is slightly faster than it would be doing two proper copies of the tree.
-
-
-build logs.
------------
-There's a convenience helper script in scripts/grab-logs.sh
-that will grab the build logs from koji for the kernel version reported
-by make verrel
-
-
-config heirarchy.
------------------
-Instead of having to maintain a config file for every arch variant we build on,
-the kernel spec uses a nested system of configs.  At the top level, is
-config-generic. Add options here that should be present in every possible
-config on all architectures.
-
-Beneath this are per-arch overrides. For example config-x86-generic add
-additional x86 specific options, and also _override_ any options that were
-set in config-generic.
-
-The heirarchy looks like this..
-
-                           config-generic
-                                 |
-                         config-x86-generic
-                         |                |
-             config-x86-32-generic   config-x86-64-generic
-
-An option set in a lower level will override the same option set in one
-of the higher levels.
-
-
-There exist two additional overrides, config-debug, and config-nodebug,
-which override -generic, and the per-arch overrides. It is documented
-further below.
-
-
-debug options.
---------------
-This is a little complicated, as the purpose & meaning of this changes
-depending on where we are in the release cycle.
-If we are building for a current stable release, 'make release' has
-typically been run already, which sets up the following..
-- Two builds occur, a 'kernel' and a 'kernel-debug' flavor.
-- kernel-debug will get various heavyweight debugging options like
-  lockdep etc turned on.
-
-If we are building for rawhide, 'make debug' has been run, which changes
-the status quo to:
-- We only build one kernel 'kernel'
-- The debug options from 'config-debug' are always turned on.
-This is done to increase coverage testing, as not many people actually
-run kernel-debug.
-
-To add new debug options, add an option to _both_ config-debug and config-nodebug,
-and also new stanzas to the Makefile 'debug' and 'release' targets.
-
-Sometimes debug options get added to config-generic, or per-arch overrides
-instead of config-[no]debug. In this instance, the options should have no
-discernable performance impact, otherwise they belong in the debug files.
-

TODO

@@ -1,16 +0,0 @@
-* Post 3.5:
-- Check if PaulMcK has fixed CONFIG_RCU_FAST_NO_HZ
-
-Config TODOs:
-* review & disable a bunch of the I2C, RTC, DVB, SOUND options.
-
-Spec file TODOs:
-
-* modules-extra: Do a few more things to make it a bit more robust.
-  - Allow for comments in the mod-extra.list file.
-  - Don't fail the build if a module is listed but not built (maybe).
-  - See if it can be tied into Kconfig instead of module names.
-
-* investigate gzip modules. Everything should support this now?
-  Looks like about 70M savings per kernel installed.
-

acpi-sony-nonvs-blacklist.patch

@@ -1,38 +0,0 @@
-diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
-index 3ed80b2..17fc718 100644
---- a/drivers/acpi/sleep.c
-+++ b/drivers/acpi/sleep.c
-@@ -390,6 +390,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
- 	},
- 	{
- 	.callback = init_nvs_nosave,
-+	.ident = "Sony Vaio VGN-FW21E",
-+	.matches = {
-+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
-+		},
-+	},
-+	{
-+	.callback = init_nvs_nosave,
- 	.ident = "Sony Vaio VGN-SR11M",
- 	.matches = {
- 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
-index 0e46fae..6d9a3ab 100644
---- a/drivers/acpi/sleep.c
-+++ b/drivers/acpi/sleep.c
-@@ -398,6 +398,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
- 	},
- 	{
- 	.callback = init_nvs_nosave,
-+	.ident = "Sony Vaio VPCEB17FX",
-+	.matches = {
-+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
-+		},
-+	},
-+	{
-+	.callback = init_nvs_nosave,
- 	.ident = "Sony Vaio VGN-SR11M",
- 	.matches = {
- 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),

ansi_cprng-Fix-off-by-one-error-in-non-block-size-request.patch

@@ -1,40 +0,0 @@
-Stephan Mueller reported to me recently a error in random number generation in
-the ansi cprng. If several small requests are made that are less than the
-instances block size, the remainder for loop code doesn't increment
-rand_data_valid in the last iteration, meaning that the last bytes in the
-rand_data buffer gets reused on the subsequent smaller-than-a-block request for
-random data.
-
-The fix is pretty easy, just re-code the for loop to make sure that
-rand_data_valid gets incremented appropriately
-
-Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
-Reported-by: Stephan Mueller <stephan.mueller@atsec.com>
-CC: Stephan Mueller <stephan.mueller@atsec.com>
-CC: Petr Matousek <pmatouse@redhat.com>
-CC: Herbert Xu <herbert@gondor.apana.org.au>
-CC: "David S. Miller" <davem@davemloft.net>
----
- crypto/ansi_cprng.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c
-index c0bb377..666f196 100644
---- a/crypto/ansi_cprng.c
-+++ b/crypto/ansi_cprng.c
-@@ -230,11 +230,11 @@ remainder:
- 	 */
- 	if (byte_count < DEFAULT_BLK_SZ) {
- empty_rbuf:
--		for (; ctx->rand_data_valid < DEFAULT_BLK_SZ;
--			ctx->rand_data_valid++) {
-+		while (ctx->rand_data_valid < DEFAULT_BLK_SZ) {
- 			*ptr = ctx->rand_data[ctx->rand_data_valid];
- 			ptr++;
- 			byte_count--;
-+			ctx->rand_data_valid++;
- 			if (byte_count == 0)
- 				goto done;
- 		}
--- 
-1.8.3.1

arm-imx6-utilite.patch

@@ -1,84 +0,0 @@
-Add initial support for cm-fx6 module.
-
-cm-fx6 is a module based on mx6q SoC with the following features:
-- Up to 4GB of DDR3
-- 1 LCD/DVI output port
-- 1 HDMI output port
-- 2 LVDS LCD ports
-- Gigabit Ethernet
-- Analog Audio
-- CAN
-- SATA
-- NAND
-- PCIE
-
-This patch allows to boot up the module, configures the serial console,
-the Ethernet adapter and the hearbeat led.
-
-Signed-off-by: Valentin Raevsky <valentin@xxxxxxxxxxxxxx>
-Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
----
- arch/arm/boot/dts/cm-fx6.dts |   51 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 51 insertions(+)
- create mode 100644 arch/arm/boot/dts/cm-fx6.dts
-
-diff --git a/arch/arm/boot/dts/cm-fx6.dts b/arch/arm/boot/dts/cm-fx6.dts
-new file mode 100644
-index 0000000..1080215
---- /dev/null
-+++ b/arch/arm/boot/dts/cm-fx6.dts
-@@ -0,0 +1,51 @@
-+/*
-+ * Copyright 2013 CompuLab Ltd.
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+
-+/ {
-+	model = "CompuLab CM-FX6";
-+	compatible = "compulab,cm-fx6", "fsl,imx6q";
-+
-+	memory {
-+		reg = <0x10000000 0x80000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		debug-led {
-+			label = "Heartbeat";
-+			gpios = <&gpio2 31 0>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+};
-+
-+&gpmi {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
-+	status = "okay";
-+};
-+
-+&fec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet_1>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
-+&uart4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart4_1>;
-+	status = "okay";
-+};
--- 
-1.7.9.5
-

arm-lpae-ax88796.patch

@@ -1,21 +0,0 @@
-X-Git-Url: http://git.linaro.org/gitweb?p=people%2Fahs3%2Farndale-acpi.git;a=blobdiff_plain;f=drivers%2Fnet%2Fethernet%2F8390%2Fax88796.c;fp=drivers%2Fnet%2Fethernet%2F8390%2Fax88796.c;h=763e575c82bc5d24e1927ad685dfbdd7a0eaa19e;hp=70dba5d01ad3cc8178318f9976a5922894a86859;hb=fe8e7c500d3d25234759351096d457b6e557ebd9;hpb=af28003b46fa7b2c5d7b52e0d4bc8f725a6305f1
-
-diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
-index 70dba5d..763e575 100644
---- a/drivers/net/ethernet/8390/ax88796.c
-+++ b/drivers/net/ethernet/8390/ax88796.c
-@@ -828,7 +828,14 @@ static int ax_probe(struct platform_device *pdev)
- 	struct ei_device *ei_local;
- 	struct ax_device *ax;
- 	struct resource *irq, *mem, *mem2;
-+#ifndef CONFIG_ARM_LPAE
-+	/* LPAE breaks this code as __aeabi_uldivmod for 64-bit
-+	 * is not supported in lib1funcs.s yet
-+	 */
- 	unsigned long mem_size, mem2_size = 0;
-+#else
-+	u32 mem_size, mem2_size = 0;
-+#endif
- 	int ret = 0;
- 
- 	dev = ax__alloc_ei_netdev(sizeof(struct ax_device));

arm-omap-load-tfp410.patch

@@ -1,14 +0,0 @@
-diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
-index 60d3958..0e304ce 100644
---- a/drivers/video/omap2/dss/core.c
-+++ b/drivers/video/omap2/dss/core.c
-@@ -298,6 +298,9 @@ static int __init omap_dss_init(void)
- 	int r;
- 	int i;
- 
-+	/* hack to load encoder-tfp410 driver */
-+	request_module("encoder-tfp410");
-+
- 	r = platform_driver_probe(&omap_dss_driver, omap_dss_probe);
- 	if (r)
- 		return r;

arm-sound-soc-samsung-dma-avoid-another-64bit-division.patch

@@ -1,13 +0,0 @@
-diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
-index 21b7926..19e6662 100644
---- a/sound/soc/samsung/dma.c
-+++ b/sound/soc/samsung/dma.c
-@@ -76,7 +76,7 @@ static void dma_enqueue(struct snd_pcm_substream *substream)
- 
- 	pr_debug("Entered %s\n", __func__);
- 
--	limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-+	limit = (u32)(prtd->dma_end - prtd->dma_start) / prtd->dma_period;
- 
- 	pr_debug("%s: loaded %d, limit %d\n",
- 				__func__, prtd->dma_loaded, limit);

arm-tegra-usb-no-reset-linux33.patch

@@ -1,16 +0,0 @@
---- linux-3.3.4-3.fc17.x86_64_orig/drivers/usb/core/hub.c	2012-05-02 20:08:18.421685932 -0400
-+++ linux-3.3.4-3.fc17.x86_64/drivers/usb/core/hub.c	2012-05-02 20:30:36.565865425 -0400
-@@ -3484,6 +3484,13 @@ static void hub_events(void)
- 				(u16) hub->change_bits[0],
- 				(u16) hub->event_bits[0]);
- 
-+		/* Don't disconnect USB-SATA on TrimSlice */
-+		if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
-+			if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
-+			    (hub->event_bits[0] == 0x2))
-+				hub->event_bits[0] = 0;
-+		}
-+
- 		/* Lock the device, then check to see if we were
- 		 * disconnected while waiting for the lock to succeed. */
- 		usb_lock_device(hdev);

ath9k_rx_dma_stop_check.patch

@@ -1,28 +0,0 @@
---- a/drivers/net/wireless/ath/ath9k/mac.c
-+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -689,7 +689,7 @@ bool ath9k_hw_stopdmarecv(struct ath_hw 
- {
- #define AH_RX_STOP_DMA_TIMEOUT 10000   /* usec */
- 	struct ath_common *common = ath9k_hw_common(ah);
--	u32 mac_status, last_mac_status = 0;
-+	u32 mac_status = 0, last_mac_status = 0;
- 	int i;
- 
- 	/* Enable access to the DMA observation bus */
-@@ -719,6 +719,16 @@ bool ath9k_hw_stopdmarecv(struct ath_hw 
- 	}
- 
- 	if (i == 0) {
-+		if (!AR_SREV_9300_20_OR_LATER(ah) &&
-+		    (mac_status & 0x700) == 0) {
-+			/*
-+			 * DMA is idle but the MAC is still stuck
-+			 * processing events
-+			 */
-+			*reset = true;
-+			return true;
-+		}
-+
- 		ath_err(common,
- 			"DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x DMADBG_7=0x%08x\n",
- 			AH_RX_STOP_DMA_TIMEOUT / 1000,

btrfs-relocate-csums-properly-with-prealloc-ext.patch

@@ -1,60 +0,0 @@
-A user reported a problem where they were getting csum errors when running a
-balance and running systemd's journal.  This is because systemd is awesome and
-fallocate()'s its log space and writes into it.  Unfortunately we assume that
-when we read in all the csums for an extent that they are sequential starting at
-the bytenr we care about.  This obviously isn't the case for prealloc extents,
-where we could have written to the middle of the prealloc extent only, which
-means the csum would be for the bytenr in the middle of our range and not the
-front of our range.  Fix this by offsetting the new bytenr we are logging to
-based on the original bytenr the csum was for.  With this patch I no longer see
-the csum errors I was seeing.  Thanks,
-
-Cc: stable@xxxxxxxxxxxxxxx
-Reported-by: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
-Signed-off-by: Josef Bacik <jbacik@xxxxxxxxxxxx>
----
- fs/btrfs/relocation.c | 18 +++++++++++++++---
- 1 file changed, 15 insertions(+), 3 deletions(-)
-
-diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
-index 5ca7ea9..b7afeaa 100644
---- a/fs/btrfs/relocation.c
-+++ b/fs/btrfs/relocation.c
-@@ -4472,6 +4472,7 @@ int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len)
- 	struct btrfs_root *root = BTRFS_I(inode)->root;
- 	int ret;
- 	u64 disk_bytenr;
-+	u64 new_bytenr;
- 	LIST_HEAD(list);
- 
- 	ordered = btrfs_lookup_ordered_extent(inode, file_pos);
-@@ -4483,13 +4484,24 @@ int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len)
- 	if (ret)
- 		goto out;
- 
--	disk_bytenr = ordered->start;
- 	while (!list_empty(&list)) {
- 		sums = list_entry(list.next, struct btrfs_ordered_sum, list);
- 		list_del_init(&sums->list);
- 
--		sums->bytenr = disk_bytenr;
--		disk_bytenr += sums->len;
-+		/*
-+		 * We need to offset the new_bytenr based on where the csum is.
-+		 * We need to do this because we will read in entire prealloc
-+		 * extents but we may have written to say the middle of the
-+		 * prealloc extent, so we need to make sure the csum goes with
-+		 * the right disk offset.
-+		 *
-+		 * We can do this because the data reloc inode refers strictly
-+		 * to the on disk bytes, so we don't have to worry about
-+		 * disk_len vs real len like with real inodes since it's all
-+		 * disk length.
-+		 */
-+		new_bytenr = ordered->start + (sums->bytenr - disk_bytenr);
-+		sums->bytenr = new_bytenr;
- 
- 		btrfs_add_ordered_sum(inode, ordered, sums);
- 	}
--- 
-1.8.3.1

check-kabi

@@ -0,0 +1,149 @@
+#!/usr/bin/python3
+#
+# check-kabi - Red Hat kABI reference checking tool
+#
+# We use this script to check against reference Module.kabi files.
+#
+# Author: Jon Masters <jcm@redhat.com>
+# Copyright (C) 2007-2009 Red Hat, Inc.
+#
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPL).
+
+# Changelog:
+#
+# 2018/06/01 - Update for python3 by Petr Oros.
+# 2009/08/15 - Updated for use in RHEL6.
+# 2007/06/13 - Initial rewrite in python by Jon Masters.
+
+__author__ = "Jon Masters <jcm@redhat.com>"
+__version__ = "2.0"
+__date__ = "2009/08/15"
+__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
+__license__ = "GPL"
+
+import getopt
+import string
+import sys
+
+true = 1
+false = 0
+
+
+def load_symvers(symvers, filename):
+    """Load a Module.symvers file."""
+
+    symvers_file = open(filename, "r")
+
+    while true:
+        in_line = symvers_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type = in_line.split()
+
+        symvers[symbol] = in_line[0:-1]
+
+
+def load_kabi(kabi, filename):
+    """Load a Module.kabi file."""
+
+    kabi_file = open(filename, "r")
+
+    while true:
+        in_line = kabi_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type = in_line.split()
+
+        kabi[symbol] = in_line[0:-1]
+
+
+def check_kabi(symvers, kabi):
+    """Check Module.kabi and Module.symvers files."""
+
+    fail = 0
+    warn = 0
+    changed_symbols = []
+    moved_symbols = []
+
+    for symbol in kabi:
+        abi_hash, abi_sym, abi_dir, abi_type = kabi[symbol].split()
+        if symbol in symvers:
+            sym_hash, sym_sym, sym_dir, sym_type = symvers[symbol].split()
+            if abi_hash != sym_hash:
+                fail = 1
+                changed_symbols.append(symbol)
+
+            if abi_dir != sym_dir:
+                warn = 1
+                moved_symbols.append(symbol)
+        else:
+            fail = 1
+            changed_symbols.append(symbol)
+
+    if fail:
+        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
+        print("")
+        print("The following symbols have been changed (this will cause an ABI breakage):")
+        print("")
+        for symbol in changed_symbols:
+            print(symbol)
+        print("")
+
+    if warn:
+        print("*** WARNING - ABI SYMBOLS MOVED ***")
+        print("")
+        print("The following symbols moved (typically caused by moving a symbol from being")
+        print("provided by the kernel vmlinux out to a loadable module):")
+        print("")
+        for symbol in moved_symbols:
+            print(symbol)
+        print("")
+
+    """Halt the build, if we got errors and/or warnings. In either case,
+       double-checkig is required to avoid introducing / concealing
+       KABI inconsistencies."""
+    if fail or warn:
+        sys.exit(1)
+    sys.exit(0)
+
+
+def usage():
+    print("""
+check-kabi: check Module.kabi and Module.symvers files.
+
+    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
+
+""")
+
+
+if __name__ == "__main__":
+
+    symvers_file = ""
+    kabi_file = ""
+
+    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
+
+    for o, v in opts:
+        if o == "-s":
+            symvers_file = v
+        if o == "-h":
+            usage()
+            sys.exit(0)
+        if o == "-k":
+            kabi_file = v
+
+    if (symvers_file == "") or (kabi_file == ""):
+        usage()
+        sys.exit(1)
+
+    symvers = {}
+    kabi = {}
+
+    load_symvers(symvers, symvers_file)
+    load_kabi(kabi, kabi_file)
+    check_kabi(symvers, kabi)

compile-fixes.patch

@@ -1,6 +0,0 @@
-#
-# Small compile fixes (For more involved fixes, please use a separate patch).
-#
-# Please add the errors from gcc before the diffs to save others having
-# to do a compile to figure out what your diff is fixing. Thanks.
-#

config-arm-generic

@@ -1,153 +0,0 @@
-CONFIG_KUSER_HELPERS=y
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FB_SSD1307=m
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_MMC=y
-CONFIG_NFS_FS=y
-# CONFIG_PID_IN_CONTEXTIDR is not set
-
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_GPIO=y
-
-CONFIG_RCU_FANOUT_LEAF=16
-# CONFIG_RTC_DRV_SNVS is not set
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_ARM_SP805_WATCHDOG=m
-CONFIG_ARM_ARCH_TIMER=y
-# CONFIG_ARM_DT_BL_CPUFREQ is not set
-CONFIG_NR_CPUS=8
-CONFIG_ARM_DMA_USE_IOMMU=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-
-# ARM AMBA generic HW
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_GIC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_OC_ETM=y
-CONFIG_FB_ARMCLCD=y
-
-# ARM VExpress
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_COMMON_CLK_VERSATILE=y
-CONFIG_I2C_VERSATILE=m
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_REGULATOR_VEXPRESS=m
-CONFIG_SENSORS_VEXPRESS=m
-
-# Device tree
-CONFIG_DTC=y
-CONFIG_DMA_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=m
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=m
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI_IRQ=m
-CONFIG_OF_PCI=m
-# CONFIG_OF_SELFTEST is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-
-# External Connectors
-CONFIG_EXTCON=m
-CONFIG_OF_EXTCON=m
-CONFIG_EXTCON_GPIO=m
-CONFIG_EXTCON_ADC_JACK=m
-
-# MTD
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_OF_PARTS=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_OF=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-
-# GPIO
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=m
-CONFIG_GPIOLIB=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_MDIO_GPIO=m
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_RESTART=y
-
-#i2c
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_MUX=m
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PINCTRL=m
-CONFIG_I2C_MUX_PCA9541=m
-
-# Sensors
-CONFIG_SENSORS_IIO_HWMON=m
-CONFIG_IIO_SYSFS_TRIGGER=m
-
-# MFD
-CONFIG_MFD_CORE=m
-
-CONFIG_SMC91X=m
-CONFIG_SMC911X=m
-
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_XEN is not set
-# CONFIG_DRM_RCAR_DU is not set
-# CONFIG_DRM_SHMOBILE is not set
-# CONFIG_MMC_DW_SOCFPGA is not set
-# CONFIG_ARM_SMMU is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_LEDS_RENESAS_TPU is not set
-# CONFIG_LOCK_STAT is not set
-
-### turn off things which make no sense on embedded SoC
-
-# core
-
-# CONFIG_INFINIBAND is not set
-# CONFIG_ISDN is not set
-
-# netdrv
-
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-
-# scsi
-
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-
-CONFIG_CRASH=m

config-arm64

@@ -1,82 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARM64=y
-
-# arm64 only SoCs
-CONFIG_ARCH_XGENE=y
-
-# CONFIG_ALWAYS_USE_PERSISTENT_CLOCK is not set
-# CONFIG_AMBA_PL08X is not set
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARM64_64K_PAGES=y
-# CONFIG_ARM_DT_BL_CPUFREQ is not set
-CONFIG_ARM_SMMU=y
-
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_BQL=y
-CONFIG_BRCMUTIL=m
-CONFIG_BUG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CMDLINE="console=ttyAMA0"
-# CONFIG_CMDLINE_FORCE is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_NET_DSA=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_HVC_DRIVER=y
-CONFIG_HZ=100
-
-# CONFIG_KVM is not set
-CONFIG_LOG_BUF_SHIFT=14
-
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_NFS_DEBUG=y
-# CONFIG_NFSD_FAULT_INJECTION is not set
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_PL330_DMA is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_AMBA_PL010 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-
-CONFIG_SWIOTLB=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_THERMAL is not set
-CONFIG_VIRTUALIZATION=y
-CONFIG_VM_EVENT_COUNTERS=y
-
-# not arm64
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-
-# busted build for various reasons
-#  uses pci_* for some reason to allocate DMA buffers
-# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
-#  weird include chain resulting in missing u64 type
-# CONFIG_USB_SPEEDTOUCH is not set
-#  dma issues in headers
-# CONFIG_PARPORT_PC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_POWER_RESET_XGENE=y

config-armv7

@@ -1,691 +0,0 @@
-# ARM unified arch kernel
-
-# CONFIG_ARCH_EXYNOS_MULTI is not set
-# CONFIG_ARCH_KEYSTONE is not set
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ARCH_PICOXCELL=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_SOCFPGA=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_U8500=y
-# CONFIG_ARCH_VIRT is not set
-CONFIG_ARCH_ZYNQ=y
-
-# These are supported in the LPAE kernel
-# CONFIG_ARM_LPAE is not set
-# CONFIG_XEN is not set
-# CONFIG_ARM_VIRT_EXT is not set
-
-# mvebu
-CONFIG_MACH_ARMADA_370_XP=y
-CONFIG_MACH_ARMADA_370=y
-CONFIG_MACH_ARMADA_XP=y
-
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_PCI_MVEBU=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_MV_XOR=y
-CONFIG_CRYPTO_DEV_MV_CESA=m
-CONFIG_MV643XX_ETH=m
-CONFIG_I2C_MV64XXX=m
-CONFIG_PINCTRL_MVEBU=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_DOVE=y
-CONFIG_EDAC_MV64X60=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_88PM80X=m
-CONFIG_RTC_DRV_MV=m
-CONFIG_MVNETA=m
-CONFIG_GPIO_MVEBU=y
-CONFIG_MVEBU_CLK_CORE=y
-CONFIG_MVEBU_CLK_GATING=y
-CONFIG_MMC_MVSDIO=m
-CONFIG_SPI_ORION=m
-CONFIG_USB_MV_UDC=m
-CONFIG_MVEBU_MBUS=y
-CONFIG_ARMADA_THERMAL=m
-
-# omap 
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-# CONFIG_ARCH_OMAP2 is not set
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_SOC_OMAP5=y
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_OMAP2420 is not set
-# CONFIG_SOC_OMAP2430 is not set
-CONFIG_SOC_OMAP3430=y
-CONFIG_SOC_TI81XX=y
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_MACH_DEVKIT8000=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_MACH_OMAP3530_LV_SOM=y
-CONFIG_MACH_OMAP3_TORPEDO=y
-CONFIG_MACH_OVERO=y
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-CONFIG_MACH_CRANEBOARD=y
-CONFIG_MACH_OMAP3_PANDORA=y
-CONFIG_MACH_TOUCHBOOK=y
-CONFIG_MACH_OMAP_3430SDP=y
-# CONFIG_MACH_NOKIA_N8X0 is not set
-# CONFIG_MACH_NOKIA_RM680 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-CONFIG_MACH_OMAP_ZOOM2=y
-CONFIG_MACH_OMAP_ZOOM3=y
-CONFIG_MACH_CM_T35=y
-CONFIG_MACH_CM_T3517=y
-CONFIG_MACH_IGEP0030=y
-CONFIG_MACH_SBC3530=y
-CONFIG_MACH_OMAP_3630SDP=y
-# CONFIG_MACH_TI8168EVM is not set
-# CONFIG_MACH_TI8148EVM is not set
-
-CONFIG_SOC_HAS_REALTIME_COUNTER=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP2PLUS_MBOX=m
-CONFIG_OMAP_MBOX_FWK=m
-CONFIG_OMAP_MBOX_KFIFO_SIZE=256
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_DMA_OMAP=y
-CONFIG_OMAP_IOMMU=y
-CONFIG_OMAP_IOVMM=m
-CONFIG_HWSPINLOCK_OMAP=m
-CONFIG_OMAP3_EMU=y
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-CONFIG_OMAP_WATCHDOG=m
-CONFIG_TWL4030_WATCHDOG=m
-
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-
-CONFIG_GPIO_TWL4030=m
-CONFIG_GPIO_TWL6040=m
-CONFIG_I2C_OMAP=m
-CONFIG_CHARGER_TWL4030=m
-CONFIG_OMAP_WATCHDOG=m
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_MADC=m
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_WATCHDOG=m
-CONFIG_BATTERY_TWL4030_MADC=m
-CONFIG_OMAP_USB2=m
-CONFIG_OMAP_USB3=m
-CONFIG_TWL4030_USB=m
-CONFIG_TWL6030_USB=m
-CONFIG_TWL6030_PWM=m
-CONFIG_TWL6040_CORE=y
-CONFIG_CLK_TWL6040=m
-CONFIG_OMAP_INTERCONNECT=m
-CONFIG_MFD_OMAP_USB_HOST=y
-CONFIG_MTD_ONENAND_OMAP2=m
-CONFIG_HDQ_MASTER_OMAP=m
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_BACKLIGHT_PANDORA=m
-CONFIG_OMAP_OCP2SCP=m
-CONFIG_USB_EHCI_HCD_OMAP=m
-CONFIG_USB_OHCI_HCD_PLATFORM=m
-CONFIG_USB_OHCI_HCD_OMAP3=y
-CONFIG_USB_MUSB_AM35X=m
-CONFIG_USB_MUSB_OMAP2PLUS=m
-CONFIG_OMAP_CONTROL_USB=m
-CONFIG_MMC_OMAP=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_DRV_MAX8907=m
-# CONFIG_RTC_DRV_TWL92330 is not set
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_SENSORS_TWL4030_MADC=m
-CONFIG_TWL6030_GPADC=m
-
-# OMAP5 (possibly other devices too)
-CONFIG_MFD_PALMAS=y
-CONFIG_PINCTRL_PALMAS=y
-CONFIG_EXTCON_PALMAS=m
-CONFIG_RTC_DRV_PALMAS=m
-CONFIG_REGULATOR_PALMAS=m
-CONFIG_GPIO_PALMAS=y
-
-CONFIG_WL_TI=y
-CONFIG_WLCORE_SDIO=m
-CONFIG_WLCORE_SPI=m
-CONFIG_WL1251_SPI=m
-CONFIG_WL12XX_SPI=m
-CONFIG_WL12XX_SDIO_TEST=m
-CONFIG_WL18XX=m
-CONFIG_WILINK_PLATFORM_DATA=y
-CONFIG_MFD_WL1273_CORE=m
-CONFIG_NFC_WILINK=m
-
-CONFIG_MTD_NAND_OMAP2=m
-CONFIG_SPI_OMAP24XX=m
-CONFIG_MFD_TI_SSP=m
-CONFIG_SPI_TI_SSP=m
-CONFIG_SPI_TI_QSPI=m
-
-CONFIG_INPUT_TWL4030_PWRBUTTON=m
-CONFIG_INPUT_TWL4030_VIBRA=m
-CONFIG_INPUT_TWL6040_VIBRA=m
-CONFIG_KEYBOARD_OMAP4=m
-CONFIG_KEYBOARD_TWL4030=m
-CONFIG_TOUCHSCREEN_TI_TSCADC=m
-
-# OMAP thermal temp. Can likely be built as module but doesn't autoload so build in to ensure performance on PandaES
-CONFIG_OMAP_BANDGAP=y
-CONFIG_TI_SOC_THERMAL=m
-CONFIG_TI_THERMAL=y
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_THERMAL=y
-
-# OMAP3 thermal/power
-CONFIG_POWER_AVS=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
-
-CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
-
-CONFIG_PWM_TIECAP=m
-CONFIG_PWM_TIEHRPWM=m
-CONFIG_PWM_TWL=m
-CONFIG_PWM_TWL_LED=m
-
-CONFIG_CRYPTO_DEV_OMAP_SHAM=m
-CONFIG_CRYPTO_DEV_OMAP_AES=m
-CONFIG_HW_RANDOM_OMAP=m
-
-CONFIG_DRM_OMAP=m
-CONFIG_DRM_OMAP_NUM_CRTCS=2
-CONFIG_OMAP2_VRFB=y
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-# CONFIG_FB_OMAP_LCD_VGA is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_DA8XX is not set
-
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_RFBI=y
-CONFIG_OMAP2_DSS_VENC=y
-CONFIG_OMAP4_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET=y
-CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
-
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
-
-# Enable V4L2 drivers for OMAP2+
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OMAP3 is not set
-# CONFIG_VIDEO_VPFE_CAPTURE is not set
-# The ones below are for TI Davinci
-# CONFIG_VIDEO_VPSS_SYSTEM is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DM644X_VPBE is not set
-# CONFIG_VIDEO_DM355_CCDC is not set
-# CONFIG_VIDEO_ISIF is not set
-# Also enable vivi driver - useful for testing a full kernelspace V4L2 driver
-CONFIG_V4L_TEST_DRIVERS=y
-CONFIG_VIDEO_VIVI=m
-
-CONFIG_SND_OMAP_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-CONFIG_SND_OMAP_SOC_AM3517EVM=m
-CONFIG_SND_OMAP_SOC_DMIC=m
-CONFIG_SND_OMAP_SOC_IGEP0020=m
-CONFIG_SND_OMAP_SOC_MCBSP=m
-CONFIG_SND_OMAP_SOC_MCPDM=m
-CONFIG_SND_OMAP_SOC_OMAP_HDMI=m
-CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
-CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
-CONFIG_SND_OMAP_SOC_OMAP3EVM=m
-CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=m
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
-CONFIG_SND_OMAP_SOC_OVERO=m
-# CONFIG_SND_OMAP_SOC_RX51 is not set
-CONFIG_SND_OMAP_SOC_SDP4430=m
-CONFIG_SND_SOC_TLV320AIC23=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-CONFIG_SND_SOC_TWL4030=m
-CONFIG_SND_SOC_TWL6040=m
-CONFIG_SND_SOC_PCM1792A=m
-CONFIG_RADIO_WL128X=m
-
-CONFIG_OMAP_REMOTEPROC=m
-
-# CONFIG_TIDSPBRIDGE is not set
-# CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
-# CONFIG_TIDSPBRIDGE_DEBUG is not set
-# CONFIG_TIDSPBRIDGE_RECOVERY=y
-# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
-# CONFIG_TIDSPBRIDGE_WDT3=y
-# CONFIG_TIDSPBRIDGE_WDT_TIMEOUT=5
-# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
-# CONFIG_TIDSPBRIDGE_BACKTRACE is not set
-
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP_IOMMU_DEBUG is not set
-# CONFIG_OMAP_MUX_DEBUG is not set
-# CONFIG_VIDEO_OMAP3_DEBUG is not set
-
-# AM33xx
-CONFIG_SOC_AM33XX=y
-CONFIG_SOC_AM43XX=y
-CONFIG_AM335X_CONTROL_USB=m
-CONFIG_AM335X_PHY_USB=m
-CONFIG_USB_MUSB_AM335X_CHILD=y
-CONFIG_USB_TI_CPPI41_DMA=y
-CONFIG_MFD_TI_AM335X_TSCADC=m
-CONFIG_TI_ST=m
-CONFIG_TI_DAC7512=m
-CONFIG_TI_DAVINCI_EMAC=m
-CONFIG_TI_DAVINCI_MDIO=m
-CONFIG_TI_DAVINCI_CPDMA=m
-CONFIG_TI_CPSW=m
-CONFIG_TI_CPTS=y
-CONFIG_TI_EMIF=m
-CONFIG_DRM_TILCDC=m
-CONFIG_SPI_DAVINCI=m
-CONFIG_REGULATOR_TI_ABB=y
-CONFIG_TI_PRIV_EDMA=y
-CONFIG_TI_EDMA=y
-CONFIG_TI_CPPI41=m
-CONFIG_MFD_TI_AM335X_TSCADC=m
-CONFIG_CHARGER_BQ24190=m
-CONFIG_TI_ADC081C=m
-CONFIG_TI_AM335X_ADC=m
-CONFIG_PWM_TIPWMSS=y
-
-# Allwinner a1x
-CONFIG_PINCTRL_SUNXI=y
-CONFIG_SUNXI_WATCHDOG=m
-CONFIG_MDIO_SUN4I=m
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_SUN4I_EMAC=m
-
-# imx 
-CONFIG_MXC_IRQ_PRIOR=y
-# CONFIG_MXC_DEBUG_BOARD is not set
-CONFIG_SOC_IMX53=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-CONFIG_MACH_IMX51_DT=y
-# CONFIG_MACH_MX51_BABBAGE is not set
-# CONFIG_MACH_EUKREA_CPUIMX51SD is not set
-CONFIG_ARM_IMX6Q_CPUFREQ=m
-CONFIG_IMX_THERMAL=m
-CONFIG_PATA_IMX=m
-CONFIG_USB_CHIPIDEA=m
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-# CONFIG_USB_CHIPIDEA_DEBUG is not set
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_FEC=m
-CONFIG_KEYBOARD_IMX=m
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_I2C_IMX=m
-CONFIG_SPI_IMX=m
-CONFIG_MFD_MC13783=m
-CONFIG_MFD_MC13XXX_SPI=m
-CONFIG_W1_MASTER_MXC=m
-CONFIG_IMX_WEIM=y
-CONFIG_IMX2_WDT=m
-CONFIG_HW_RANDOM_MXC_RNGA=m
-CONFIG_CRYPTO_DEV_SAHARA=m
-# CONFIG_FB_MX3 is not set
-
-CONFIG_SND_IMX_SOC=m
-CONFIG_SND_SOC_FSL_SSI=m
-CONFIG_SND_SOC_FSL_UTILS=m
-CONFIG_SND_SOC_IMX_SSI=m
-CONFIG_SND_SOC_IMX_AUDMUX=m
-CONFIG_SND_SOC_IMX_PCM_FIQ=m
-CONFIG_SND_SOC_IMX_PCM_DMA=m
-CONFIG_SND_SOC_IMX_SGTL5000=m
-CONFIG_SND_SOC_IMX_WM8962=m
-CONFIG_SND_SOC_IMX_MC13783=m
-CONFIG_SND_SOC_IMX_SPDIF=m
-
-CONFIG_USB_EHCI_MXC=m
-CONFIG_USB_IMX21_HCD=m
-CONFIG_USB_MXS_PHY=m
-CONFIG_MMC_DW_SOCFPGA=m
-CONFIG_MMC_SDHCI_ESDHC_IMX=m
-CONFIG_MMC_MXC=m
-CONFIG_SPI_MXS=m
-CONFIG_RTC_DRV_IMXDI=m
-CONFIG_RTC_DRV_MXC=m
-# CONFIG_MX3_IPU is not set
-# CONFIG_MX3_IPU_IRQS is not set
-CONFIG_IMX_SDMA=m
-CONFIG_IMX_DMA=m
-CONFIG_AHCI_IMX=m
-# CONFIG_MXS_DMA is not set
-
-CONFIG_PWM_IMX=m
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_DRM_IMX=m
-CONFIG_DRM_IMX_FB_HELPER=m
-CONFIG_DRM_IMX_HDMI=m
-CONFIG_DRM_IMX_IPUV3_CORE=m
-CONFIG_DRM_IMX_IPUV3=m
-# CONFIG_DRM_IMX_LDB is not set
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
-CONFIG_DRM_IMX_TVE=m
-CONFIG_VIDEO_CODA=m
-
-CONFIG_MFD_SYSCON=y
-CONFIG_SENSORS_MC13783_ADC=m
-CONFIG_REGULATOR_ANATOP=m
-CONFIG_REGULATOR_MC13783=m
-CONFIG_REGULATOR_MC13892=m
-CONFIG_LEDS_MC13783=m
-CONFIG_RTC_DRV_MC13XXX=m
-CONFIG_CAN_FLEXCAN=m
-
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_INPUT_88PM80X_ONKEY=m
-
-# i.MX6Q (and likely Samsung among others) 
-CONFIG_MFD_DA9052_I2C=y
-CONFIG_MFD_DA9052_SPI=y
-CONFIG_MFD_DA9055=y
-CONFIG_TOUCHSCREEN_DA9052=m
-CONFIG_INPUT_DA9052_ONKEY=m
-CONFIG_INPUT_DA9055_ONKEY=m
-CONFIG_GPIO_DA9052=m
-CONFIG_GPIO_DA9055=m
-CONFIG_BATTERY_DA9052=m
-CONFIG_SENSORS_DA9052_ADC=m
-CONFIG_SENSORS_DA9055=m
-CONFIG_DA9052_WATCHDOG=m
-CONFIG_DA9055_WATCHDOG=m
-CONFIG_BACKLIGHT_DA9052=m
-CONFIG_LEDS_DA9052=m
-CONFIG_RTC_DRV_DA9052=m
-CONFIG_RTC_DRV_DA9055=m
-CONFIG_REGULATOR_DA9052=m
-CONFIG_REGULATOR_DA9055=m
-
-# picoxcell
-CONFIG_CRYPTO_DEV_PICOXCELL=m
-CONFIG_HW_RANDOM_PICOXCELL=m
-
-# ST Ericsson
-CONFIG_MACH_HREFV60=y
-CONFIG_MACH_SNOWBALL=y
-CONFIG_MACH_UX500_DT=y
-
-CONFIG_ABX500_CORE=y
-CONFIG_ARM_U8500_CPUIDLE=y
-CONFIG_UX500_DEBUG_UART=2
-CONFIG_AB8500_CORE=y
-CONFIG_STE_DMA40=y
-CONFIG_HSEM_U8500=m
-CONFIG_PINCTRL_ABX500=y
-CONFIG_PINCTRL_AB8500=y
-CONFIG_I2C_NOMADIK=m
-CONFIG_KEYBOARD_NOMADIK=m
-CONFIG_DB8500_CPUFREQ_COOLING=m
-CONFIG_DB8500_THERMAL=y
-CONFIG_UX500_WATCHDOG=m
-CONFIG_INPUT_AB8500_PONKEY=m
-CONFIG_REGULATOR_AB8500=y
-CONFIG_AB8500_USB=m
-CONFIG_RTC_DRV_AB8500=m
-CONFIG_PWM_AB8500=m
-CONFIG_SND_SOC_UX500=m
-CONFIG_SND_SOC_UX500_PLAT_DMA=m
-CONFIG_SND_SOC_UX500_MACH_MOP500=m
-CONFIG_CLKSRC_DBX500_PRCMU=y
-CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK=y
-CONFIG_CRYPTO_DEV_UX500=m
-CONFIG_CRYPTO_DEV_UX500_CRYP=m
-CONFIG_CRYPTO_DEV_UX500_HASH=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_AB8500_BM=y
-CONFIG_AB8500_GPADC=y
-CONFIG_SENSORS_AB8500=m
-CONFIG_STE_MODEM_RPROC=m
-CONFIG_CW1200=m
-CONFIG_CW1200_WLAN_SDIO=m
-CONFIG_CW1200_WLAN_SPI=m
-CONFIG_UX500_WATCHDOG=m
-CONFIG_IIO_ST_ACCEL_3AXIS=m
-CONFIG_IIO_ST_GYRO_3AXIS=m
-CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
-CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
-CONFIG_IIO_ST_MAGN_3AXIS=m
-CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
-CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
-CONFIG_IIO_ST_PRESS=m
-CONFIG_IIO_ST_PRESS_I2C=m
-CONFIG_IIO_ST_PRESS_SPI=m
-CONFIG_IIO_ST_SENSORS_I2C=m
-CONFIG_IIO_ST_SENSORS_SPI=m
-CONFIG_IIO_ST_SENSORS_CORE=m
-
-# tegra
-CONFIG_ARCH_TEGRA_2x_SOC=y
-CONFIG_ARCH_TEGRA_3x_SOC=y
-# CONFIG_ARCH_TEGRA_114_SOC is not set
-CONFIG_ARM_TEGRA_CPUFREQ=y
-CONFIG_TEGRA20_MC=y
-CONFIG_TEGRA30_MC=y
-
-CONFIG_SERIAL_TEGRA=y
-
-CONFIG_PCI_TEGRA=y
-CONFIG_TEGRA_IOMMU_GART=y
-CONFIG_TEGRA_IOMMU_SMMU=y
-CONFIG_MMC_SDHCI_TEGRA=m
-
-CONFIG_I2C_TEGRA=m
-
-CONFIG_TEGRA_SYSTEM_DMA=y
-CONFIG_TEGRA_EMC_SCALING_ENABLE=y
-CONFIG_TEGRA_AHB=y
-CONFIG_TEGRA20_APB_DMA=y
-# CONFIG_SPI_TEGRA114 is not set
-CONFIG_SPI_TEGRA20_SFLASH=m
-CONFIG_SPI_TEGRA20_SLINK=m
-
-CONFIG_MFD_MAX8907=m
-CONFIG_KEYBOARD_TEGRA=m
-CONFIG_PINCTRL_TEGRA=y
-CONFIG_PINCTRL_TEGRA20=y
-CONFIG_PINCTRL_TEGRA30=y
-CONFIG_USB_EHCI_TEGRA=m
-CONFIG_RTC_DRV_TEGRA=m
-
-CONFIG_SND_SOC_TEGRA=m
-CONFIG_SND_SOC_TEGRA_ALC5632=m
-CONFIG_SND_SOC_TEGRA_RT5640=m
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
-CONFIG_SND_SOC_TEGRA_WM8753=m
-CONFIG_SND_SOC_TEGRA_WM8903=m
-CONFIG_SND_SOC_TEGRA_WM9712=m
-CONFIG_SND_SOC_TEGRA20_AC97=m
-CONFIG_SND_SOC_TEGRA30_AHUB=m
-CONFIG_SND_SOC_TEGRA30_I2S=m
-
-# AC100 (PAZ00)
-CONFIG_MFD_NVEC=y
-CONFIG_MFD_TPS80031=y
-CONFIG_KEYBOARD_NVEC=y
-CONFIG_SERIO_NVEC_PS2=y
-CONFIG_NVEC_POWER=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_NVEC_LEDS=y
-CONFIG_NVEC_PAZ00=y
-CONFIG_MFD_TPS6586X=y
-CONFIG_GPIO_TPS6586X=y
-CONFIG_RTC_DRV_TPS6586X=m
-
-CONFIG_PWM_TEGRA=m
-
-CONFIG_TEGRA_HOST1X=m
-CONFIG_TEGRA_HOST1X_FIREWALL=y
-
-CONFIG_DRM_TEGRA=y
-# CONFIG_DRM_TEGRA_STAGING is not set
-# CONFIG_DRM_TEGRA_DEBUG is not set
-
-CONFIG_CRYPTO_DEV_TEGRA_AES=m
-
-CONFIG_LEDS_RENESAS_TPU=y
-CONFIG_GPIO_PCA953X=m
-
-# OLPC XO
-CONFIG_SERIO_OLPC_APSP=m
-
-# Zynq-7xxx
-# likely needs usb/mmc still
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_COMMON_CLK_AXI_CLKGEN=m
-CONFIG_ARM_ZYNQ_CPUIDLE=y
-CONFIG_LATTICE_ECP3_CONFIG=m
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_XILINX_EMACLITE=m
-CONFIG_GPIO_XILINX=y
-CONFIG_I2C_XILINX=m
-CONFIG_SPI_XILINX=m
-
-# Multi function devices
-CONFIG_MFD_88PM800=m
-CONFIG_MFD_88PM805=m
-CONFIG_MFD_T7L66XB=y
-CONFIG_MFD_TC6387XB=y
-
-# Generic drivers
-CONFIG_REMOTEPROC=m
-
-# Regulator drivers
-CONFIG_REGULATOR_FAN53555=m
-# CONFIG_REGULATOR_88PM800 is not set
-CONFIG_REGULATOR_AD5398=m
-CONFIG_REGULATOR_ISL6271A=m
-CONFIG_REGULATOR_LP3971=m
-CONFIG_REGULATOR_LP3972=m
-CONFIG_REGULATOR_LP872X=y
-CONFIG_REGULATOR_LP8755=m
-CONFIG_REGULATOR_MAX1586=m
-CONFIG_REGULATOR_MAX8649=m
-CONFIG_REGULATOR_MAX8660=m
-CONFIG_REGULATOR_MAX8907=m
-CONFIG_REGULATOR_MAX8952=m
-CONFIG_REGULATOR_MAX8973=m
-
-# usb gadget 
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_MUSB_HDRC=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_DUAL_ROLE=y
-CONFIG_USB_MUSB_DSPS=m
-CONFIG_USB_GPIO_VBUS=m
-# CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-CONFIG_USB_GADGET_VBUS_DRAW=100
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-# CONFIG_USB_GADGET_VBUS_DRAW is not set
-# CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_AMD5536UDC is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-
-# Needs work/investigation
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-
-# CONFIG_ARM_KPROBES_TEST is not set
-
-# Defined config options we don't use yet
-# CONFIG_PINCTRL_IMX35 is not set
-
-# CONFIG_BATTERY_RX51 is not set
-# CONFIG_IR_RX51 is not set
-# CONFIG_GENERIC_CPUFREQ_CPU0 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-
-# CONFIG_DVB_USB_PCTV452E is not set
-# We need to fix these as they should be either generic includes or kconfig fixes
-# drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_POWER_RESET_QNAP is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_DRM_TEGRA_DEBUG is not set
-# CONFIG_CRYPTO_DEV_UX500_DEBUG is not set
-# CONFIG_AB8500_DEBUG is not set
-
-# CONFIG_SOC_VF610 is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_MMC_TMIO is not set

config-armv7-generic

@@ -1,504 +0,0 @@
-# arm configs for sharing between armv7 and armv7-lpae
-# Generic ARM config options
-CONFIG_ARM=y
-
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-CONFIG_ARCH_MULTI_V7=y
-
-CONFIG_CMDLINE=""
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_AEABI=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-CONFIG_KERNEL_MODE_NEON=y
-
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ASM_UNIFIED=y
-CONFIG_ARM_CPU_TOPOLOGY=y
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_SWP_EMULATE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_HIGHPTE=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_ATAGS=y
-CONFIG_ATAGS_PROC=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y
-
-# CONFIG_MCPM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_DMA_CACHE_RWFO is not set
-# CONFIG_THUMB2_KERNEL is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_ARM_VIRT_EXT is not set
-
-# Platforms enabled/disabled globally on ARMv7
-CONFIG_ARCH_HIGHBANK=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
-CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
-# CONFIG_ARCH_BCM is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_SHMOBILE_MULTI is not set
-
-# highbank
-# 2013/04/19 - stability issues
-CONFIG_EDAC_HIGHBANK_MC=m
-CONFIG_EDAC_HIGHBANK_L2=m
-CONFIG_SATA_HIGHBANK=m
-CONFIG_ARM_HIGHBANK_CPUFREQ=m
-CONFIG_ARM_HIGHBANK_CPUIDLE=y
-
-# errata
-# v5/v6
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# Cortex-A8
-CONFIG_ARM_ERRATA_430973=y
-# The following two don't work with MP
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# Cortex-A9
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_742230=y
-CONFIG_ARM_ERRATA_742231=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-# Disabled due to causing highbank to crash
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PJ4B_ERRATA_4742=y
-# Cortex-A15
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-
-# generic that deviates from or should be merged into config-generic
-CONFIG_SMP_ON_UP=y
-CONFIG_HIGHMEM=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_SMT=y
-
-CONFIG_RCU_FANOUT=32
-
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_LSM_MMAP_MIN_ADDR=32768
-
-CONFIG_XZ_DEC_ARM=y
-
-CONFIG_ARM_CPU_SUSPEND=y
-
-CONFIG_LOCAL_TIMERS=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_CC_STACKPROTECTOR=y
-
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-
-# Root as NFS, different from mainline
-CONFIG_ROOT_NFS=y
-
-CONFIG_LBDAF=y
-
-# Device tree
-CONFIG_USE_OF=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_APPENDED_DTB=y
-
-# General vexpress ARM drivers
-CONFIG_ARM_TIMER_SP804=y
-
-CONFIG_SERIO_AMBAKMI=m
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_MRST_MAX3110=m
-
-CONFIG_RTC_DRV_PL030=y
-CONFIG_RTC_DRV_PL031=y
-
-CONFIG_PL330_DMA=m
-CONFIG_AMBA_PL08X=y
-CONFIG_ARM_SP805_WATCHDOG=m
-CONFIG_GPIO_PL061=y
-CONFIG_PL320_MBOX=y
-
-# usb
-CONFIG_USB_OTG=y
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_ULPI=y
-CONFIG_AX88796=m
-CONFIG_AX88796_93CX6=y
-CONFIG_USB_ISP1760_HCD=m
-# CONFIG_USB_EHCI_HCD_ORION is not set
-
-# Multifunction Devices
-CONFIG_MFD_TPS65090=y
-CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TPS65912=y
-CONFIG_MFD_TPS65912_I2C=y
-CONFIG_MFD_TPS65912_SPI=y
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-
-# Pin stuff
-CONFIG_PINMUX=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_GENERIC_PINCONF=y
-# CONFIG_PINCTRL_SAMSUNG is not set
-# CONFIG_PINCTRL_EXYNOS4 is not set
-
-# GPIO
-CONFIG_GPIO_GENERIC_PLATFORM=m
-# CONFIG_GPIO_EM is not set
-CONFIG_GPIO_ADNP=m
-CONFIG_GPIO_MCP23S08=m
-CONFIG_SERIAL_8250_EM=m
-CONFIG_INPUT_GPIO_TILT_POLLED=m
-CONFIG_MDIO_BUS_MUX_GPIO=m
-CONFIG_MDIO_BUS_MUX_MMIOREG=m
-CONFIG_LEDS_GPIO=m
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MC33880=m
-CONFIG_GPIO_74X164=m
-CONFIG_GPIO_TPS65910=y
-CONFIG_GPIO_TPS65912=m
-# CONFIG_GPIO_RCAR is not set
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_CHARGER_GPIO=m
-
-# SPI
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_PL022=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_ALTERA=m
-CONFIG_SPI_BUTTERFLY=m
-CONFIG_SPI_LM70_LLP=m
-CONFIG_SPI_OC_TINY=m
-CONFIG_SPI_S3C64XX=m
-CONFIG_SPI_SC18IS602=m
-CONFIG_SPI_XCOMM=m
-CONFIG_SPI_XILINX=m
-CONFIG_SPI_DESIGNWARE=m
-CONFIG_SPI_TLE62X0=m
-# CONFIG_SPI_FSL_SPI is not set
-
-CONFIG_NFC_NCI_SPI=y
-
-# i2c
-CONFIG_I2C_DESIGNWARE_CORE=m
-CONFIG_I2C_DESIGNWARE_PLATFORM=m
-
-# HW crypto and rng
-CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-
-# EDAC
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=m
-CONFIG_EDAC_LEGACY_SYSFS=y
-
-# Watchdog
-CONFIG_MPCORE_WATCHDOG=m
-
-# Thermal / powersaving
-CONFIG_THERMAL=y
-CONFIG_ARM_PSCI=y
-
-# Mailbox
-CONFIG_MAILBOX=y
-
-# MTD
-# CONFIG_MG_DISK is not set
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
-CONFIG_MTD_DATAFLASH_OTP=y
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_SST25L=m
-CONFIG_EEPROM_AT25=m
-CONFIG_EEPROM_93XX46=m
-
-# MMC/SD
-CONFIG_MMC_SPI=m
-
-# Designware (used by numerous devices)
-CONFIG_MMC_DW=m
-CONFIG_MMC_DW_PLTFM=m
-CONFIG_MMC_DW_PCI=m
-CONFIG_SPI_DW_MMIO=m
-CONFIG_SPI_DW_PCI=m
-# CONFIG_MMC_DW_SOCFPGA is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_IDMAC is not set
-CONFIG_USB_DWC2=m
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-CONFIG_USB_DWC3=m
-CONFIG_USB_DWC3_OMAP=m
-CONFIG_USB_DWC3_EXYNOS=m
-CONFIG_USB_DWC3_PCI=m
-# CONFIG_USB_DWC3_DEBUG is not set
-CONFIG_DW_WATCHDOG=m
-
-# Sound
-CONFIG_SND_ARM=y
-CONFIG_SND_ARMAACI=m
-CONFIG_SND_SOC=m
-CONFIG_SND_SPI=y
-CONFIG_SND_DESIGNWARE_I2S=m
-CONFIG_SND_SIMPLE_CARD=m
-CONFIG_SND_SOC_CACHE_LZO=y
-CONFIG_SND_SOC_ALL_CODECS=m
-CONFIG_SND_DMAENGINE_PCM=m
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-# CONFIG_SND_ATMEL_SOC is not set
-
-# Displays
-CONFIG_BACKLIGHT_TPS65217=m
-
-# RTC
-CONFIG_RTC_DRV_DS1305=m
-CONFIG_RTC_DRV_DS1390=m
-CONFIG_RTC_DRV_DS3234=m
-CONFIG_RTC_DRV_M41T93=m
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_PCF2123=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-CONFIG_RTC_DRV_RX4581=m
-CONFIG_RTC_DRV_TPS65910=m
-CONFIG_RTC_DRV_TPS80031=m
-
-# Regulators
-CONFIG_REGULATOR=y
-CONFIG_RFKILL_REGULATOR=m
-# CONFIG_REGULATOR_DUMMY is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=m
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
-CONFIG_REGULATOR_USERSPACE_CONSUMER=m
-CONFIG_REGULATOR_GPIO=m
-CONFIG_REGULATOR_AD5398=m
-CONFIG_REGULATOR_DA9210=m
-CONFIG_REGULATOR_FAN53555=m
-CONFIG_REGULATOR_ISL6271A=m
-CONFIG_REGULATOR_LP3971=m
-CONFIG_REGULATOR_LP3972=m
-CONFIG_REGULATOR_LP872X=m
-CONFIG_REGULATOR_LP8755=m
-CONFIG_REGULATOR_MAX1586=m
-CONFIG_REGULATOR_MAX8649=m
-CONFIG_REGULATOR_MAX8660=m
-CONFIG_REGULATOR_MAX8952=m
-CONFIG_REGULATOR_MAX8973=m
-CONFIG_REGULATOR_PFUZE100=m
-CONFIG_REGULATOR_TPS51632=m
-CONFIG_REGULATOR_TPS62360=m
-CONFIG_REGULATOR_TPS65023=m
-CONFIG_REGULATOR_TPS6507X=m
-CONFIG_REGULATOR_TPS65090=m
-CONFIG_REGULATOR_TPS65217=m
-CONFIG_REGULATOR_TPS6524X=m
-CONFIG_REGULATOR_TPS6586X=m
-CONFIG_REGULATOR_TPS65910=m
-CONFIG_REGULATOR_TPS65912=m
-CONFIG_REGULATOR_TPS80031=m
-
-CONFIG_CHARGER_MANAGER=y
-CONFIG_CHARGER_TPS65090=m
-CONFIG_PDA_POWER=m
-CONFIG_GENERIC_ADC_BATTERY=m
-
-# Sensors
-CONFIG_TMP006=m
-CONFIG_BMP085=y
-CONFIG_BMP085_I2C=m
-CONFIG_BMP085_SPI=m
-CONFIG_SENSORS_AD7314=m
-CONFIG_SENSORS_ADCXX=m
-CONFIG_SENSORS_ADS7871=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_HTU21=m
-CONFIG_SENSORS_LIS3_SPI=m
-CONFIG_SENSORS_LM70=m
-CONFIG_SENSORS_MAX1111=m
-
-CONFIG_LCD_L4F00242T03=m
-CONFIG_LCD_LMS283GF05=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI922X=m
-CONFIG_LCD_ILI9320=m
-CONFIG_LCD_TDO24M=m
-CONFIG_LCD_VGG2432A4=m
-CONFIG_LCD_S6E63M0=m
-CONFIG_LCD_LD9040=m
-CONFIG_LCD_AMS369FG06=m
-CONFIG_LCD_LMS501KF03=m
-CONFIG_LCD_HX8357=m
-
-# Input
-CONFIG_INPUT_GP2A=m
-CONFIG_INPUT_ARIZONA_HAPTICS=m
-CONFIG_INPUT_MC13783_PWRBUTTON=m
-
-CONFIG_TOUCHSCREEN_ADS7846=m
-CONFIG_TOUCHSCREEN_AD7877=m
-CONFIG_TOUCHSCREEN_MC13783=m
-CONFIG_TOUCHSCREEN_TSC2005=m
-
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_PWM=m
-CONFIG_BMP085_SPI=m
-
-# Contiguous Memory Allocator
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y
-# CONFIG_CMA_DEBUG is not set
-CONFIG_CMA_SIZE_MBYTES=16
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-CONFIG_SRAM=y
-
-# Ethernet
-CONFIG_KS8851=m
-CONFIG_ENC28J60=m
-CONFIG_LIBERTAS_SPI=m
-CONFIG_P54_SPI=m
-CONFIG_P54_SPI_DEFAULT_EEPROM=n
-CONFIG_MICREL_KS8995MA=m
-CONFIG_IEEE802154_AT86RF230=m
-CONFIG_IEEE802154_MRF24J40=m
-
-CONFIG_ARM_KPROBES_TEST=m
-
-# jffs2
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_ZLIB=y
-
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-
-# Sensors
-CONFIG_SENSORS_HTU21=m
-
-# Should be in generic
-CONFIG_BPF_JIT=y
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-
-# CONFIG_PATA_PLATFORM is not set
-
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_IMX is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DM9000 is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_EZX_PCAP is not set
-
-# Needs work/investigation
-# CONFIG_ARM_CHARLCD is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_FSL_DSPI is not set
-
-# these modules all fail with missing __bad_udelay
-# http://www.spinics.net/lists/arm/msg15615.html provides some background
-# CONFIG_SUNGEM is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SFC is not set
-
-# these all currently fail due to missing symbols __bad_udelay or
-# error: implicit declaration of function ‘iowrite32be’
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_MLX4_EN is not set
-
-# Debug options. We need to deal with them at some point like x86
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_ARM_DT_BL_CPUFREQ is not set
-
-# FIX ME
-# CONFIG_FB_XILINX is not set

config-armv7-lpae

@@ -1,142 +0,0 @@
-# ARM A15 lpae unified arch kernel
-CONFIG_ARCH_EXYNOS_MULTI=y
-CONFIG_ARCH_KEYSTONE=y
-CONFIG_ARCH_VIRT=y
-CONFIG_ARCH_EXYNOS5=y
-
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_ZYNQ is not set
-
-
-# CONFIG_ARCH_EXYNOS4 is not set
-
-# CONFIG_EXYNOS_ATAGS is not set
-
-CONFIG_ARM_LPAE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
-
-# Cortex-A15
-CONFIG_ARM_ERRATA_798181=y
-CONFIG_ARM_ERRATA_773022=y
-
-CONFIG_KVM=y
-CONFIG_KVM_ARM_HOST=y
-CONFIG_KVM_ARM_MAX_VCPUS=8
-CONFIG_KVM_ARM_VGIC=y
-CONFIG_KVM_ARM_TIMER=y
-
-CONFIG_XEN=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
-CONFIG_XEN_BLKDEV_FRONTEND=m
-CONFIG_XEN_BLKDEV_BACKEND=m
-CONFIG_XEN_NETDEV_FRONTEND=m
-CONFIG_XEN_NETDEV_BACKEND=m
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_XEN_DEV_EVTCHN=m
-CONFIG_XEN_BACKEND=y
-CONFIG_XENFS=m
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=m
-CONFIG_XEN_WDT=m
-
-CONFIG_MACH_EXYNOS5_DT=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_SOC_EXYNOS5250=y
-CONFIG_SOC_EXYNOS5420=y
-CONFIG_SOC_EXYNOS5440=y
-# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS5440_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS_CPUFREQ is not set
-# CONFIG_GENERIC_CPUFREQ_CPU0 is not set
-CONFIG_EXYNOS_THERMAL=m
-CONFIG_PCI_EXYNOS=y
-
-CONFIG_ARM_CCI=y
-CONFIG_TCG_TIS_I2C_INFINEON=m
-
-CONFIG_PINCTRL_EXYNOS=y
-CONFIG_PINCTRL_EXYNOS5440=y
-CONFIG_EXYNOS_IOMMU=y
-CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
-CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
-CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
-CONFIG_EXYNOS_VIDEO=y
-CONFIG_EXYNOS_MIPI_DSI=y
-CONFIG_EXYNOS_DP=y
-# CONFIG_EXYNOS_LCD_S6E8AX0 is not set
-CONFIG_DRM_EXYNOS=m
-CONFIG_DRM_EXYNOS_IOMMU=y
-CONFIG_DRM_EXYNOS_DMABUF=y
-CONFIG_DRM_EXYNOS_FIMD=y
-CONFIG_DRM_EXYNOS_HDMI=y
-CONFIG_DRM_EXYNOS_VIDI=y
-CONFIG_DRM_EXYNOS_G2D=y
-CONFIG_DRM_EXYNOS_IPP=y
-CONFIG_DRM_EXYNOS_FIMC=y
-CONFIG_DRM_EXYNOS_ROTATOR=y
-CONFIG_DRM_EXYNOS_GSC=y
-# CONFIG_FB_S3C is not set
-CONFIG_SND_SOC_SAMSUNG=m
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_S5P=m
-CONFIG_USB_OHCI_EXYNOS=y
-CONFIG_PWM_SAMSUNG=m
-CONFIG_SAMSUNG_GPIO_EXTRA=8
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
-CONFIG_USB_EHCI_S5P=y
-CONFIG_SAMSUNG_USBPHY=m
-CONFIG_SAMSUNG_USB2PHY=m
-CONFIG_SAMSUNG_USB3PHY=m
-CONFIG_MMC_DW_EXYNOS=m
-CONFIG_RTC_DRV_S3C=m
-
-# Chromebook
-CONFIG_MFD_CROS_EC=m
-CONFIG_MFD_CROS_EC_I2C=m
-CONFIG_MFD_CROS_EC_SPI=m
-CONFIG_KEYBOARD_CROS_EC=m
-
-# Arndale/Origen
-CONFIG_MFD_MAX8997=y
-CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR_MAX8997=m
-CONFIG_REGULATOR_S5M8767=m
-CONFIG_COMMON_CLK_MAX77686=m
-
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-# CONFIG_EXYNOS4_SDHCI_CH0_8BIT is not set
-# CONFIG_EXYNOS4_SDHCI_CH2_8BIT is not set
-
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-# CONFIG_S3C_BOOT_UART_FORCE_FIFO is not set
-# CONFIG_I2C_S3C2410 is not set
-# CONFIG_S3C2410_WATCHDOG is not set
-# CONFIG_MMC_SDHCI_S3C is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_SPI_DAVINCI is not set
-# CONFIG_I2C_DAVINCI is not set
-# CONFIG_TI_SOC_THERMAL is not set

config-debug

@@ -1,127 +0,0 @@
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_PCM_XRUN_DEBUG=y
-
-CONFIG_DEBUG_ATOMIC_SLEEP=y
-
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_PROVE_RCU=y
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-CONFIG_DEBUG_PER_CPU_MAPS=y
-CONFIG_CPUMASK_OFFSTACK=y
-
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-
-CONFIG_FAULT_INJECTION=y
-CONFIG_FAILSLAB=y
-CONFIG_FAIL_PAGE_ALLOC=y
-CONFIG_FAIL_MAKE_REQUEST=y
-CONFIG_FAULT_INJECTION_DEBUG_FS=y
-CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
-CONFIG_FAIL_IO_TIMEOUT=y
-CONFIG_FAIL_MMC_REQUEST=y
-
-CONFIG_SLUB_DEBUG_ON=y
-
-CONFIG_LOCK_STAT=y
-
-CONFIG_DEBUG_STACK_USAGE=y
-
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
-
-CONFIG_DEBUG_SG=y
-
-# CONFIG_DEBUG_PAGEALLOC is not set
-
-CONFIG_DEBUG_WRITECOUNT=y
-CONFIG_DEBUG_OBJECTS=y
-# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-
-CONFIG_X86_PTDUMP=y
-
-CONFIG_CAN_DEBUG_DEVICES=y
-
-CONFIG_MODULE_FORCE_UNLOAD=y
-
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-CONFIG_DEBUG_NOTIFIERS=y
-
-CONFIG_DMA_API_DEBUG=y
-
-CONFIG_MMIOTRACE=y
-
-CONFIG_DEBUG_CREDENTIALS=y
-
-CONFIG_EXT4_DEBUG=y
-
-CONFIG_XFS_WARN=y
-
-CONFIG_DEBUG_PERF_USE_VMALLOC=y
-
-# off in both production debug and nodebug builds,
-#  on in rawhide nodebug builds
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-
-CONFIG_JBD2_DEBUG=y
-
-CONFIG_NFSD_FAULT_INJECTION=y
-
-CONFIG_DEBUG_BLK_CGROUP=y
-
-CONFIG_DRBD_FAULT_INJECTION=y
-
-CONFIG_ATH_DEBUG=y
-CONFIG_CARL9170_DEBUGFS=y
-CONFIG_IWLWIFI_DEVICE_TRACING=y
-
-CONFIG_RTLWIFI_DEBUG=y
-
-CONFIG_DEBUG_OBJECTS_WORK=y
-
-CONFIG_DMADEVICES_DEBUG=y
-CONFIG_DMADEVICES_VDEBUG=y
-
-CONFIG_PM_ADVANCED_DEBUG=y
-
-CONFIG_CEPH_LIB_PRETTYDEBUG=y
-CONFIG_QUOTA_DEBUG=y
-
-CONFIG_PCI_DEFAULT_USE_CRS=y
-
-CONFIG_KGDB_KDB=y
-CONFIG_KDB_KEYBOARD=y
-CONFIG_KDB_CONTINUE_CATASTROPHIC=0
-
-CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
-CONFIG_TEST_LIST_SORT=y
-CONFIG_TEST_STRING_HELPERS=m
-
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-
-CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
-
-CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
-# CONFIG_DEBUG_KMEMLEAK_TEST is not set
-CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
-
-CONFIG_MAC80211_MESSAGE_TRACING=y
-
-CONFIG_EDAC_DEBUG=y
-
-CONFIG_X86_DEBUG_STATIC_CPU_HAS=y
-CONFIG_LATENCYTOP=y
-CONFIG_SCHEDSTATS=y

config-i686-PAE

@@ -1,9 +0,0 @@
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HIGHMEM64G=y
-# CONFIG_OLPC_OPENFIRMWARE is not set
-
-CONFIG_XEN_DEV_EVTCHN=m
-CONFIG_XEN_SYS_HYPERVISOR=y
-
-# I2O only works on non-PAE 32-bit x86
-# CONFIG_I2O is not set

config-no-extra

@@ -1,27 +0,0 @@
-### config-no-extra: only (to a first approximation) modules listed in
-###   mod-extra.list should be listed here. 
-
-# CONFIG_ISDN is not set
-# CONFIG_RDS is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATALK is not set
-# CONFIG_HAMRADIO is not set
-
-# CONFIG_DEV_APPLETALK is not set
-
-# CONFIG_FUSION is not set
-# CONFIG_I2O is not set
-
-# CONFIG_NET_TULIP is not set
-
-# CONFIG_HERMES is not set
-
-# CONFIG_OCFS2_FS is not set
-# CONFIG_CUSE is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set

config-nodebug

@@ -1,131 +0,0 @@
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_PCM_XRUN_DEBUG=y
-
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-CONFIG_CPUMASK_OFFSTACK=y
-
-# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
-
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FAILSLAB is not set
-# CONFIG_FAIL_PAGE_ALLOC is not set
-# CONFIG_FAIL_MAKE_REQUEST is not set
-# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
-# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
-# CONFIG_FAIL_IO_TIMEOUT is not set
-# CONFIG_FAIL_MMC_REQUEST is not set
-
-# CONFIG_SLUB_DEBUG_ON is not set
-
-# CONFIG_LOCK_STAT is not set
-
-# CONFIG_DEBUG_STACK_USAGE is not set
-
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
-
-# CONFIG_DEBUG_SG is not set
-
-# CONFIG_DEBUG_PAGEALLOC is not set
-
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
-# CONFIG_DEBUG_OBJECTS_FREE is not set
-# CONFIG_DEBUG_OBJECTS_TIMERS is not set
-# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-
-# CONFIG_X86_PTDUMP is not set
-
-# CONFIG_CAN_DEBUG_DEVICES is not set
-
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-# CONFIG_DEBUG_NOTIFIERS is not set
-
-# CONFIG_DMA_API_DEBUG is not set
-
-# CONFIG_MMIOTRACE is not set
-
-# CONFIG_DEBUG_CREDENTIALS is not set
-
-# off in both production debug and nodebug builds,
-#  on in rawhide nodebug builds
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-
-# CONFIG_EXT4_DEBUG is not set
-
-# CONFIG_XFS_WARN is not set
-
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-
-# CONFIG_JBD2_DEBUG is not set
-
-# CONFIG_NFSD_FAULT_INJECTION is not set
-
-# CONFIG_DEBUG_BLK_CGROUP is not set
-
-# CONFIG_DRBD_FAULT_INJECTION is not set
-
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_CARL9170_DEBUGFS is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-
-# CONFIG_RTLWIFI_DEBUG is not set
-
-# CONFIG_DEBUG_OBJECTS_WORK is not set
-
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMADEVICES_VDEBUG is not set
-
-CONFIG_PM_ADVANCED_DEBUG=y
-
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-# CONFIG_QUOTA_DEBUG is not set
-
-CONFIG_PCI_DEFAULT_USE_CRS=y
-
-CONFIG_KGDB_KDB=y
-CONFIG_KDB_KEYBOARD=y
-CONFIG_KDB_CONTINUE_CATASTROPHIC=0
-
-# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-
-# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
-
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
-# CONFIG_DEBUG_KMEMLEAK_TEST is not set
-CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
-
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-
-# CONFIG_EDAC_DEBUG is not set
-
-# CONFIG_SPI_DEBUG is not set
-
-# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
-
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_LATENCYTOP is not set
-

config-powerpc-generic

@@ -1,383 +0,0 @@
-# Most PowerPC kernels we build are SMP
-CONFIG_IRQ_ALL_CPUS=y
-CONFIG_PPC=y
-CONFIG_WATCHDOG_RTAS=m
-CONFIG_DEBUGGER=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_ALTIVEC=y
-
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-CONFIG_TAU_AVERAGE=y
-
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_GEN_RTC_X is not set
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-
-CONFIG_ADB=y
-CONFIG_ADB_PMU=y
-CONFIG_WINDFARM=y
-CONFIG_WINDFARM_PM112=y
-CONFIG_I2C_POWERMAC=y
-CONFIG_APPLE_AIRPORT=m
-CONFIG_SERIAL_PMACZILOG=m
-# CONFIG_SERIAL_PMACZILOG_TTYS is not set
-CONFIG_AGP_UNINORTH=y
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-CONFIG_FB_IBM_GXT4500=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_VGA16 is not set
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY_BACKLIGHT=y
-CONFIG_FB_RIVA_BACKLIGHT=y
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-# CONFIG_FB_MB862XX_LIME is not set
-# CONFIG_FB_MB862XX_I2C is not set
-
-
-CONFIG_SND_POWERMAC=m
-CONFIG_SND_POWERMAC_AUTO_DRC=y
-CONFIG_SND_AOA=m
-CONFIG_SND_AOA_SOUNDBUS=m
-CONFIG_SND_AOA_FABRIC_LAYOUT=m
-CONFIG_SND_AOA_ONYX=m
-CONFIG_SND_AOA_TAS=m
-CONFIG_SND_AOA_TOONIE=m
-CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-CONFIG_XMON=y
-# CONFIG_XMON_DEFAULT is not set
-CONFIG_XMON_DISASSEMBLY=y
-
-CONFIG_BOOTX_TEXT=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_CAPI_EICON=y
-
-CONFIG_NVRAM=y
-
-# CONFIG_PCMCIA_M8XX is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_NI52 is not set
-# CONFIG_NI65 is not set
-# CONFIG_LANCE is not set
-# CONFIG_3C515 is not set
-# CONFIG_ELPLUS is not set
-
-CONFIG_MEMORY_HOTPLUG=y
-
-# Stuff which wants bus_to_virt() or virt_to_bus()
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-
-
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-
-CONFIG_PPC_EFIKA=y
-CONFIG_PPC_MEDIA5200=y
-
-# CONFIG_PPC_LITE5200 is not set
-CONFIG_PPC_BESTCOMM=y
-CONFIG_PMAC_RACKMETER=m
-CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-
-CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-
-CONFIG_SENSORS_AMS=m
-CONFIG_SENSORS_AMS_PMU=y
-CONFIG_SENSORS_AMS_I2C=y
-
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_IDE_TASK_IOCTL=y
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_IDE_PMAC is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_DELKIN=m
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_MTD_PHYSMAP_OF=m
-CONFIG_IDE_PROC_FS=y
-CONFIG_MACINTOSH_DRIVERS=y
-
-CONFIG_PPC_PASEMI_MDIO=m
-CONFIG_SPU_FS_64K_LS=y
-CONFIG_PPC_PASEMI_CPUFREQ=y
-CONFIG_PMAC_APM_EMU=m
-CONFIG_HW_RANDOM_PASEMI=m
-
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=m
-CONFIG_EDAC_PASEMI=m
-CONFIG_EDAC_AMD8131=m
-CONFIG_EDAC_AMD8111=m
-CONFIG_EDAC_LEGACY_SYSFS=y
-
-# CONFIG_AXON_RAM is not set
-# CONFIG_OPROFILE_CELL is not set
-
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_PATA_PLATFORM=m
-CONFIG_PATA_OF_PLATFORM=m
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-CONFIG_THERMAL=y
-
-# CONFIG_MEMORY_HOTREMOVE is not set
-
-CONFIG_DMADEVICES=y
-# CONFIG_FSL_DMA is not set
-
-CONFIG_SND_PPC=y
-
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_FS_ENET is not set
-# CONFIG_UCC_GETH is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_QE is not set
-# CONFIG_I2C_CPM is not set
-
-CONFIG_NET_VENDOR_IBM=y
-
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-
-# CONFIG_PPC_SMLPAR is not set
-
-# CONFIG_MGCOGE is not set
-# CONFIG_GEF_SBC610 is not set
-# CONFIG_GEF_PPC9A is not set
-# CONFIG_GEF_SBC310 is not set
-
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_QE_GPIO is not set
-# CONFIG_MPC8xxx_GPIO is not set
-
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-CONFIG_IDE_GD_ATAPI=y
-
-# CONFIG_MCU_MPC8349EMITX is not set
-
-# CONFIG_GPIO_XILINX is not set
-
-CONFIG_PMIC_DA903X=y
-CONFIG_BACKLIGHT_DA903X=m
-CONFIG_LEDS_DA903X=m
-
-CONFIG_MSI_BITMAP_SELFTEST=y
-
-CONFIG_RELOCATABLE=y
-
-# CONFIG_HVC_UDBG is not set
-CONFIG_PRINT_STACK_DEPTH=64
-
-CONFIG_BATTERY_DA9030=m
-# CONFIG_TWL4030_CORE is not set
-
-CONFIG_BLK_DEV_IT8172=m
-CONFIG_TOUCHSCREEN_DA9034=m
-
-CONFIG_SIMPLE_GPIO=y
-
-# CONFIG_FSL_PQ_MDIO is not set
-
-# CONFIG_PS3_VRAM is not set
-CONFIG_MDIO_GPIO=m
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-# CONFIG_USB_FHCI_HCD is not set
-# CONFIG_FHCI_DEBUG is not set
-
-# CONFIG_AMIGAONE is not set
-
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-
-CONFIG_DTL=y
-
-CONFIG_MMC_SDHCI_OF=m
-
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-
-CONFIG_CAN_SJA1000_OF_PLATFORM=m
-
-CONFIG_PPC_EMULATED_STATS=y
-
-CONFIG_SWIOTLB=y
-
-# CONFIG_RDS is not set
-
-CONFIG_PPC_DISABLE_WERROR=y
-
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_EMACLITE is not set
-
-CONFIG_GPIO_WM831X=m
-# CONFIG_GPIO_LANGWELL is not set
-# CONFIG_GPIO_UCB1400 is not set
-# CONFIG_EDAC_MPC85XX is not set
-
-CONFIG_NR_IRQS=512
-CONFIG_SPARSE_IRQ=y
-
-# CONFIG_PPC_MPC5200_LPBFIFO is not set
-# CONFIG_CAN_MSCAN is not set
-# CONFIG_CAN_MPC5XXX is not set
-CONFIG_PATA_MACIO=y
-CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-
-# CONFIG_MFD_TC35892 is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-
-# CONFIG_GPIO_SCH is not set
-
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-
-# CONFIG_MPC512X_DMA is not set
-
-CONFIG_KVM_GUEST=y
-
-CONFIG_I2C_MPC=m
-
-# CONFIG_IMA is not set
-# CONFIG_TCG_TPM is not set
-
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_SHA1_PPC is not set
-
-# CONFIG_GPIO_MCP23S08 is not set
-
-# CONFIG_CAN_FLEXCAN is not set
-# CONFIG_NET_VENDOR_XILINX is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_IBM_EMAC is not set
-# CONFIG_NET_VENDOR_PASEMI is not set
-# CONFIG_NET_VENDOR_TOSHIBA is not set
-
-# CONFIG_CPU_IDLE is not set
-# CONFIG_OF_SELFTEST is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-
-CONFIG_RCU_FANOUT_LEAF=16
-
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_MPIC_MSGR is not set
-# CONFIG_FA_DUMP is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-
-# CONFIG_FAIL_IOMMU is not set
-# CONFIG_SPAPR_TCE_IOMMU is not set
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-
-# CONFIG_PPC_DENORMALISATION is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-
-# CONFIG_OF_DISPLAY_TIMING is not set
-# CONFIG_OF_VIDEOMODE is not set
-
-# CONFIG_POWERNV_MSI is not set
-
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_FB_SSD1307=m
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=n
-
-CONFIG_XZ_DEC_POWERPC=y
-
-CONFIG_CRASH=m

config-powerpc32-generic

@@ -1,181 +0,0 @@
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-# CONFIG_RTAS_PROC is not set
-# CONFIG_PCMCIA_M8XX is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_CPU_FREQ_PMAC=y
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PREP=y
-
-# CONFIG_PPC_MPC5200_SIMPLE is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_NV is not set
-
-# busted in .28git1
-# ERROR: "cacheable_memzero" [drivers/net/gianfar_driver.ko] undefined!
-# CONFIG_GIANFAR is not set
-# CONFIG_USB_EHCI_FSL is not set
-
-CONFIG_PMAC_APM_EMU=y
-CONFIG_PMAC_BACKLIGHT=y
-
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-# CONFIG_TASK_SIZE_BOOL is not set
-# CONFIG_KERNEL_START_BOOL is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_SCSI_MESH=m
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
-
-CONFIG_LBDAF=y
-
-CONFIG_SCSI_MAC53C94=m
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_MACIO=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
-
-CONFIG_PMAC_MEDIABAY=y
-CONFIG_NET_VENDOR_APPLE=y
-CONFIG_BMAC=m
-CONFIG_MACE=m
-# CONFIG_MACE_AAUI_PORT is not set
-# CONFIG_MV643XX_ETH is not set
-CONFIG_I2C_HYDRA=m
-CONFIG_I2C_MPC=m
-CONFIG_THERM_WINDTUNNEL=m
-CONFIG_THERM_ADT746X=m
-# CONFIG_ANSLCD is not set
-
-CONFIG_FB_PLATINUM=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_CT65550=y
-# CONFIG_BDI_SWITCH is not set
-
-CONFIG_MAC_FLOPPY=m
-# CONFIG_BLK_DEV_FD is not set
-
-CONFIG_FB_ATY128=y
-CONFIG_FB_ATY=y
-CONFIG_FB_MATROX=y
-# CONFIG_KEXEC is not set
-
-# CONFIG_HVC_RTAS is not set
-
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_BRIQ_PANEL=m
-
-# CONFIG_ATA_PIIX is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_MPC52xx is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_SERVERWORKS is not set
-
-# CONFIG_SERIAL_MPC52xx is not set
-# CONFIG_MPC5200_WDT is not set
-CONFIG_8xxx_WDT=m
-CONFIG_GEF_WDT=m
-
-# CONFIG_PPC_MPC5200_BUGFIX is not set
-# CONFIG_NET_VENDOR_FREESCALE is not set
-#CHECK: This may later become a tristate.
-CONFIG_MDIO_GPIO=m
-
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-
-# CONFIG_EMBEDDED6xx is not set
-
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-
-# CONFIG_VIRQ_DEBUG is not set
-
-CONFIG_PPC_BESTCOMM_ATA=m
-CONFIG_PPC_BESTCOMM_FEC=m
-CONFIG_PPC_BESTCOMM_GEN_BD=m
-
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PAGE_OFFSET_BOOL is not set
-# CONFIG_FB_FSL_DIU is not set
-CONFIG_IRQSTACKS=y
-CONFIG_VIRTUALIZATION=y
-
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_HTC_EGPIO is not set
-
-# CONFIG_TIFM_CORE is not set
-
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-
-# CONFIG_I2C_NFORCE2 is not set
-
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-
-# CONFIG_MEMSTICK is not set
-
-# CONFIG_IPMI_HANDLER is not set
-
-# PPC gets sad with debug alloc (bz 448598)
-# CONFIG_DEBUG_PAGEALLOC is not set
-
-CONFIG_SND_ISA=y
-CONFIG_CRYPTO_DEV_TALITOS=m
-
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_MPC8272_ADS is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_EP8248E is not set
-# CONFIG_MPC830x_RDB is not set
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-# CONFIG_MPC8641_HPCN is not set
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
-# CONFIG_FSL_LBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-
-# CONFIG_USB_MUSB_HDRC is not set
-
-# busted in 2.6.27
-# drivers/mtd/maps/sbc8240.c: In function 'init_sbc8240_mtd':
-# drivers/mtd/maps/sbc8240.c:172: warning: passing argument 1 of 'simple_map_init' from incompatible pointer type
-# drivers/mtd/maps/sbc8240.c:177: error: 'struct mtd_info' has no member named 'module'
-
-CONFIG_RCU_FANOUT=32
-
-CONFIG_KVM_BOOK3S_32=m
-
-# CONFIG_SCSI_QLA_ISCSI is not set
-
-CONFIG_BATTERY_PMU=m
-

config-powerpc32-smp

@@ -1,3 +0,0 @@
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_NR_CPUS=4
-# CONFIG_BATTERY_PMU is not set

config-powerpc64

@@ -1,178 +0,0 @@
-CONFIG_WINDFARM_PM81=y
-CONFIG_WINDFARM_PM91=y
-CONFIG_WINDFARM_PM121=y
-CONFIG_WINDFARM_PM72=y
-CONFIG_WINDFARM_RM31=y
-
-CONFIG_PPC_PMAC64=y
-CONFIG_PPC_MAPLE=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_PSERIES=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_POWERNV=y
-CONFIG_POWERNV_MSI=y
-CONFIG_PPC_POWERNV_RTAS=y
-# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
-# CONFIG_PPC_PS3 is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PPC_CELL_QPACE is not set
-CONFIG_PMAC_RACKMETER=m
-CONFIG_IBMEBUS=y
-CONFIG_RTAS_FLASH=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_PPC_SPLPAR=y
-CONFIG_SCANLOG=y
-CONFIG_LPARCFG=y
-CONFIG_SERIAL_ICOM=m
-CONFIG_HVCS=m
-CONFIG_HVC_CONSOLE=y
-# CONFIG_HVC_OLD_HVSI is not set
-CONFIG_HOTPLUG_PCI=y
-CONFIG_THERM_PM72=y
-CONFIG_IBMVETH=m
-CONFIG_SCSI_IBMVSCSI=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
-CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
-CONFIG_PMAC_SMU=y
-CONFIG_CPU_FREQ_PMAC64=y
-CONFIG_CPU_FREQ_MAPLE=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-CONFIG_HVC_RTAS=y
-# CONFIG_HVC_ISERIES is not set
-CONFIG_HVC_OPAL=y
-
-# iSeries device drivers
-#
-# CONFIG_ISERIES_VETH is not set
-CONFIG_VIODASD=m
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
-
-CONFIG_PASEMI_MAC=m
-CONFIG_SERIAL_OF_PLATFORM=m
-
-CONFIG_SERIAL_TXX9=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
-CONFIG_SERIAL_TXX9_CONSOLE=y
-
-CONFIG_HVC_BEAT=y
-
-CONFIG_PPC_PMI=m
-
-CONFIG_PATA_SCC=m
-
-CONFIG_APM_EMULATION=m
-
-CONFIG_PPC64=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_NR_CPUS=1024
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-
-# CONFIG_POWER4_ONLY is not set
-
-CONFIG_RTAS_PROC=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_NUMA=y
-CONFIG_PPC_64K_PAGES=y
-CONFIG_PPC_SUBPAGE_PROT=y
-CONFIG_SCHED_SMT=y
-
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-
-CONFIG_MEMORY_HOTREMOVE=y
-
-# CONFIG_MV643XX_ETH is not set
-CONFIG_IRQSTACKS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_INPUT_PCSPKR is not set
-
-CONFIG_EHEA=m
-CONFIG_INFINIBAND_EHCA=m
-
-# CONFIG_HCALL_STATS is not set
-
-CONFIG_XMON_DISASSEMBLY=y
-
-CONFIG_SCSI_IBMVSCSIS=m
-
-# CONFIG_TUNE_CELL is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-# CONFIG_VIRQ_DEBUG is not set
-
-CONFIG_EDAC_CPC925=m
-CONFIG_FRAME_WARN=2048
-
-CONFIG_PHYP_DUMP=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-CONFIG_VIRTUALIZATION=y
-
-CONFIG_VSX=y
-
-CONFIG_SCSI_IBMVFC=m
-# CONFIG_SCSI_IBMVFC_TRACE is not set
-CONFIG_IBM_BSR=m
-
-CONFIG_CRASH_DUMP=y
-CONFIG_RELOCATABLE=y
-
-CONFIG_RCU_FANOUT=64
-
-CONFIG_CMA=y
-# CONFIG_CMA_DEBUG is not set
-CONFIG_KVM_BOOK3S_64=m
-CONFIG_KVM_BOOK3S_64_HV=y
-# CONFIG_KVM_EXIT_TIMING is not set
-CONFIG_KVM_XICS=y
-
-#-- bz#607175
-#-- active memory sharing
-CONFIG_PPC_SMLPAR=y
-CONFIG_CMM=y
-#-- DLPAR memory remove
-CONFIG_SPARSEMEM_VMEMMAP=y
-
-# CONFIG_COMPACTION is not set
-
-CONFIG_PSERIES_ENERGY=m
-
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_PSERIES_IDLE=y
-
-CONFIG_PPC_ICSWX=y
-CONFIG_IO_EVENT_IRQ=y
-CONFIG_HW_RANDOM_AMD=m
-
-CONFIG_UIO_PDRV=m
-
-CONFIG_HW_RANDOM_PSERIES=m
-CONFIG_CRYPTO_DEV_NX=y
-CONFIG_CRYPTO_842=m
-CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
-CONFIG_CRYPTO_DEV_NX_COMPRESS=m
-
-
-CONFIG_BPF_JIT=y
-# CONFIG_PPC_ICSWX_PID is not set
-# CONFIG_PPC_ICSWX_USE_SIGILL is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PPC_TRANSACTIONAL_MEM is not set
-# CONFIG_SND_HDA_INTEL is not set
-CONFIG_BLK_DEV_RSXX=m

config-powerpc64p7

@@ -1,168 +0,0 @@
-CONFIG_POWER7_CPU=y
-# CONFIG_PPC_PMAC64 is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_ISERIES is not set
-# CONFIG_POWER3 is not set
-CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_POWERNV=y
-CONFIG_POWERNV_MSI=y
-CONFIG_PPC_POWERNV_RTAS=y
-# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
-# CONFIG_PPC_PS3 is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PPC_CELL_QPACE is not set
-CONFIG_IBMEBUS=y
-CONFIG_RTAS_FLASH=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_PPC_SPLPAR=y
-CONFIG_SCANLOG=y
-CONFIG_LPARCFG=y
-CONFIG_SERIAL_ICOM=m
-CONFIG_HVCS=m
-CONFIG_HVC_CONSOLE=y
-# CONFIG_HVC_OLD_HVSI is not set
-CONFIG_HOTPLUG_PCI=y
-CONFIG_THERM_PM72=y
-CONFIG_IBMVETH=m
-CONFIG_SCSI_IBMVSCSI=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
-CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-CONFIG_HVC_RTAS=y
-# CONFIG_HVC_ISERIES is not set
-CONFIG_HVC_OPAL=y
-
-# iSeries device drivers
-#
-# CONFIG_ISERIES_VETH is not set
-CONFIG_VIODASD=m
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
-
-CONFIG_SERIAL_OF_PLATFORM=m
-
-CONFIG_SERIAL_TXX9=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
-CONFIG_SERIAL_TXX9_CONSOLE=y
-
-CONFIG_HVC_BEAT=y
-
-CONFIG_PPC_PMI=m
-
-CONFIG_PATA_SCC=m
-
-CONFIG_APM_EMULATION=m
-
-CONFIG_PPC64=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_NR_CPUS=1024
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-
-# CONFIG_POWER4_ONLY is not set
-
-CONFIG_RTAS_PROC=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_NUMA=y
-CONFIG_PPC_64K_PAGES=y
-CONFIG_PPC_SUBPAGE_PROT=y
-CONFIG_SCHED_SMT=y
-
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-
-CONFIG_MEMORY_HOTREMOVE=y
-
-# CONFIG_MV643XX_ETH is not set
-CONFIG_IRQSTACKS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_INPUT_PCSPKR is not set
-
-CONFIG_EHEA=m
-CONFIG_INFINIBAND_EHCA=m
-
-# CONFIG_HCALL_STATS is not set
-
-CONFIG_XMON_DISASSEMBLY=y
-
-CONFIG_SCSI_IBMVSCSIS=m
-
-# CONFIG_TUNE_CELL is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-# CONFIG_VIRQ_DEBUG is not set
-
-CONFIG_EDAC_CPC925=m
-CONFIG_FRAME_WARN=2048
-
-CONFIG_PHYP_DUMP=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-CONFIG_VIRTUALIZATION=y
-
-CONFIG_VSX=y
-
-CONFIG_SCSI_IBMVFC=m
-# CONFIG_SCSI_IBMVFC_TRACE is not set
-CONFIG_IBM_BSR=m
-
-CONFIG_CRASH_DUMP=y
-CONFIG_RELOCATABLE=y
-
-CONFIG_RCU_FANOUT=64
-
-CONFIG_CMA=y
-# CONFIG_CMA_DEBUG is not set
-CONFIG_KVM_BOOK3S_64=m
-CONFIG_KVM_BOOK3S_64_HV=y
-# CONFIG_KVM_EXIT_TIMING is not set
-CONFIG_KVM_XICS=y
-
-#-- bz#607175
-#-- active memory sharing
-CONFIG_PPC_SMLPAR=y
-CONFIG_CMM=y
-#-- DLPAR memory remove
-CONFIG_SPARSEMEM_VMEMMAP=y
-
-# CONFIG_COMPACTION is not set
-
-CONFIG_PSERIES_ENERGY=m
-
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_PSERIES_IDLE=y
-
-CONFIG_PPC_ICSWX=y
-CONFIG_IO_EVENT_IRQ=y
-CONFIG_HW_RANDOM_AMD=m
-
-CONFIG_UIO_PDRV=m
-
-CONFIG_HW_RANDOM_PSERIES=m
-CONFIG_CRYPTO_DEV_NX=y
-CONFIG_CRYPTO_842=m
-CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
-CONFIG_CRYPTO_DEV_NX_COMPRESS=m
-
-
-CONFIG_BPF_JIT=y
-# CONFIG_PPC_ICSWX_PID is not set
-# CONFIG_PPC_ICSWX_USE_SIGILL is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_SND_HDA_INTEL is not set
-CONFIG_BLK_DEV_RSXX=m

config-s390x

@@ -1,281 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_MARCH_G5 is not set
-# CONFIG_MARCH_Z900 is not set
-CONFIG_MARCH_Z9_109=y
-# CONFIG_MARCH_Z990 is not set
-
-CONFIG_NR_CPUS=64
-CONFIG_COMPAT=y
-
-# See bug 496596
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# See bug 496605
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NO_IDLE_HZ=y
-
-#
-# I/O subsystem configuration
-#
-CONFIG_QDIO=m
-
-#
-# Misc
-#
-CONFIG_IPL=y
-# CONFIG_IPL_TAPE is not set
-CONFIG_IPL_VM=y
-# CONFIG_PROCESS_DEBUG is not set
-CONFIG_PFAULT=y
-CONFIG_SHARED_KERNEL=y
-CONFIG_CMM=m
-CONFIG_CMM_PROC=y
-# CONFIG_NETIUCV is not set
-CONFIG_SMSGIUCV=m
-CONFIG_CRASH_DUMP=y
-
-#
-# SCSI low-level drivers
-#
-CONFIG_ZFCP=m
-CONFIG_ZFCPDUMP=y
-CONFIG_CCW=y
-
-#
-# S/390 block device drivers
-#
-CONFIG_DCSSBLK=m
-CONFIG_BLK_DEV_XPRAM=m
-CONFIG_DASD=m
-CONFIG_DASD_PROFILE=y
-CONFIG_DASD_ECKD=m
-CONFIG_DASD_FBA=m
-CONFIG_DASD_DIAG=m
-CONFIG_DASD_EER=y
-
-#
-# S/390 character device drivers
-#
-CONFIG_TN3270=y
-CONFIG_TN3270_CONSOLE=y
-CONFIG_TN3215=y
-CONFIG_TN3215_CONSOLE=y
-CONFIG_CCW_CONSOLE=y
-CONFIG_SCLP_TTY=y
-CONFIG_SCLP_CONSOLE=y
-CONFIG_SCLP_VT220_TTY=y
-CONFIG_SCLP_VT220_CONSOLE=y
-CONFIG_SCLP_CPI=m
-CONFIG_SCLP_ASYNC=m
-CONFIG_S390_TAPE=m
-CONFIG_S390_TAPE_3590=m
-
-CONFIG_APPLDATA_BASE=y
-CONFIG_APPLDATA_MEM=m
-CONFIG_APPLDATA_OS=m
-CONFIG_APPLDATA_NET_SUM=m
-CONFIG_TN3270_TTY=y
-CONFIG_TN3270_FS=m
-
-
-#
-# S/390 tape interface support
-#
-CONFIG_S390_TAPE_BLOCK=y
-
-#
-# S/390 tape hardware support
-#
-CONFIG_S390_TAPE_34XX=m
-
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_NETCONSOLE=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# S/390 network device drivers
-#
-CONFIG_LCS=m
-CONFIG_CTC=m
-CONFIG_IUCV=m
-CONFIG_QETH=m
-CONFIG_QETH_IPV6=y
-CONFIG_CCWGROUP=m
-
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_B44 is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_OSF_PARTITION is not set
-CONFIG_IBM_PARTITION=y
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-
-
-#
-# S390 crypto hw
-#
-CONFIG_CRYPTO_SHA1_S390=m
-CONFIG_CRYPTO_SHA256_S390=m
-CONFIG_CRYPTO_DES_S390=m
-CONFIG_CRYPTO_AES_S390=m
-
-#
-# Kernel hacking
-#
-
-#
-# S390 specific stack options; needs gcc 3.5 so off for now
-#
-CONFIG_PACK_STACK=y
-CONFIG_CHECK_STACK=y
-# CONFIG_WARN_STACK is not set
-# CONFIG_SMALL_STACK is not set
-
-CONFIG_ZVM_WATCHDOG=m
-CONFIG_VMLOGRDR=m
-CONFIG_MONREADER=m
-
-CONFIG_VIRT_CPU_ACCOUNTING=y
-
-# CONFIG_CLAW is not set
-
-# CONFIG_ATMEL is not set
-
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MII is not set
-
-
-CONFIG_STACK_GUARD=256
-CONFIG_CMM_IUCV=y
-
-# CONFIG_DETECT_SOFTLOCKUP is not set
-
-CONFIG_S390_HYPFS_FS=y
-
-CONFIG_MONWRITER=m
-CONFIG_ZCRYPT=m
-CONFIG_ZCRYPT_MONOLITHIC=y
-
-CONFIG_S390_EXEC_PROTECT=y
-CONFIG_AFIUCV=m
-CONFIG_S390_PRNG=m
-
-CONFIG_S390_VMUR=m
-
-# CONFIG_THERMAL is not set
-
-CONFIG_CTCM=m
-CONFIG_QETH_L2=m
-CONFIG_QETH_L3=m
-CONFIG_CRYPTO_SHA512_S390=m
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-# CONFIG_KVM_S390_UCONTROL is not set
-CONFIG_S390_GUEST=y
-CONFIG_VIRTIO_CONSOLE=y
-
-
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_CHSC_SCH=m
-
-# drivers/isdn/hardware/mISDN/hfcmulti.c:5255:2: error: #error "not running on big endian machines now"
-# CONFIG_MISDN_HFCMULTI is not set
-
-CONFIG_HVC_IUCV=y
-
-CONFIG_RCU_FANOUT=64
-CONFIG_RCU_FANOUT_LEAF=16
-
-# CONFIG_SUSPEND is not set
-
-CONFIG_SMSGIUCV_EVENT=m
-
-# CONFIG_PREEMPT_TRACER is not set
-
-CONFIG_VMCP=y
-
-CONFIG_ZFCP_DIF=y
-
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_BOOK=y
-
-# CONFIG_WARN_DYNAMIC_STACK is not set
-
-CONFIG_CRYPTO_GHASH_S390=m
-
-CONFIG_BPF_JIT=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-CONFIG_SCM_BUS=y
-CONFIG_EADM_SCH=m
-CONFIG_SCM_BLOCK=m
-CONFIG_SCM_BLOCK_CLUSTER_WRITE=y
-# CONFIG_S390_PTDUMP is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_PCI is not set
-
-# CONFIG_NEW_LEDS is not set
-# CONFIG_HID is not set
-
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_STAGING is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DRM is not set
-# CONFIG_SOUND is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_NFORCE2 is not set
-
-# CONFIG_PHYLIB is not set
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_SH_ETH is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_IEEE802154_DRIVERS is not set
-
-# CONFIG_FMC is not set
-
-CONFIG_CRASH=m

config-x86-32-generic

@@ -1,233 +0,0 @@
-# CONFIG_64BIT is not set
-
-# CONFIG_X86_32_NON_STANDARD is not set
-
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GOLDFISH is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-CONFIG_X86_BIGSMP=y
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_RDC321X is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-CONFIG_M686=y
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_STA2X11 is not set
-
-CONFIG_NR_CPUS=32
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_PPRO_FENCE is not set
-
-CONFIG_TOSHIBA=m
-
-CONFIG_SONYPI=m
-CONFIG_SONYPI_COMPAT=y
-
-# CONFIG_NUMA is not set
-
-# CONFIG_NOHIGHMEM is not set
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-
-# CONFIG_MATH_EMULATION is not set
-
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=y
-CONFIG_FB_GEODE_GX=y
-# CONFIG_FB_GEODE_GX1 is not set
-
-CONFIG_FB_SSD1307=m
-
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_GOANY=y
-
-CONFIG_IBM_ASM=m
-
-#
-# APM (Advanced Power Management) BIOS Support
-#
-CONFIG_APM=y
-# CONFIG_APM_IGNORE_USER_SUSPEND is not set
-# CONFIG_APM_DO_ENABLE is not set
-CONFIG_APM_CPU_IDLE=y
-# CONFIG_APM_DISPLAY_BLANK is not set
-# CONFIG_APM_ALLOW_INTS is not set
-
-CONFIG_ACPI_BLACKLIST_YEAR=1999
-
-
-# CONFIG_X86_POWERNOW_K6 is not set
-CONFIG_X86_POWERNOW_K7=y
-# CONFIG_X86_GX_SUSPMOD is not set
-CONFIG_X86_SPEEDSTEP_ICH=y
-CONFIG_X86_SPEEDSTEP_SMI=y
-CONFIG_X86_SPEEDSTEP_LIB=y
-# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
-CONFIG_X86_LONGRUN=y
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# e_powersaver is dangerous
-# CONFIG_X86_E_POWERSAVER is not set
-
-CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
-
-
-# CONFIG_4KSTACKS is not set
-
-CONFIG_PCI_DIRECT=y
-
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-
-# SHPC has half-arsed PCI probing, which makes it load on too many systems
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-
-CONFIG_SCx200_ACB=m
-
-# CONFIG_X86_REBOOTFIXUPS is not set
-
-CONFIG_PC8736x_GPIO=m
-# CONFIG_NSC_GPIO is not set
-CONFIG_CS5535_GPIO=m
-CONFIG_GPIO_SCH=m
-
-CONFIG_SND_ISA=y
-CONFIG_SND_ES18XX=m
-
-CONFIG_HW_RANDOM_GEODE=m
-
-CONFIG_TC1100_WMI=m
-
-CONFIG_IB700_WDT=m
-
-CONFIG_PHYSICAL_ALIGN=0x400000
-CONFIG_PHYSICAL_START=0x400000
-
-# CONFIG_KEXEC_JUMP is not set
-
-CONFIG_CRYPTO_AES_586=y
-CONFIG_CRYPTO_DEV_GEODE=m
-CONFIG_CRYPTO_TWOFISH_586=m
-
-CONFIG_VIDEO_CAFE_CCIC=m
-
-CONFIG_XEN_MAX_DOMAIN_MEMORY=8
-
-CONFIG_MTD_NAND_CAFE=m
-
-CONFIG_LBDAF=y
-
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-
-
-CONFIG_OLPC=y
-CONFIG_OLPC_OPENFIRMWARE=y
-CONFIG_BATTERY_OLPC=y
-CONFIG_MOUSE_PS2_OLPC=y
-CONFIG_OLPC_XO1_PM=y
-CONFIG_OLPC_XO15_SCI=y
-CONFIG_OLPC_XO1_RTC=y
-CONFIG_OLPC_XO1_SCI=y
-# CONFIG_ALIX is not set
-# staging
-# CONFIG_FB_OLPC_DCON is not set
-
-# CONFIG_SPARSE_IRQ is not set
-
-CONFIG_RCU_FANOUT=32
-
-# CONFIG_X86_ANCIENT_MCE is not set
-
-# CONFIG_X86_MRST is not set
-
-CONFIG_I2C_PXA=m
-# CONFIG_GPIO_LANGWELL is not set
-
-# CONFIG_INTEL_TXT is not set
-
-CONFIG_GEODE_WDT=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-
-CONFIG_LEDS_INTEL_SS4200=m
-
-CONFIG_OLPC_XO1=m
-CONFIG_XO1_RFKILL=m
-
-CONFIG_X86_32_IRIS=m
-
-CONFIG_POWER_RESET_GPIO=y
-
-
-
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP_OF=m
-CONFIG_PROC_DEVICETREE=y
-CONFIG_SERIAL_OF_PLATFORM=m
-CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
-# CONFIG_MMC_SDHCI_OF is not set
-
-# CONFIG_X86_INTEL_MID is not set
-
-CONFIG_MFD_CS5535=m
-# CONFIG_MFD_SYSCON is not set
-
-# I2O enabled only for 32-bit x86, disabled for PAE kernel
-CONFIG_I2O=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-CONFIG_I2O_CONFIG=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_CONFIG_OLD_IOCTL=y
-CONFIG_I2O_BUS=m
-
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_BACKLIGHT_PWM=m
-
-# CONFIG_EDAC_SBRIDGE is not set
-
-# CONFIG_X86_WANT_INTEL_MID is not set
-# CONFIG_OF_SELFTEST is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_GEOS is not set
-# CONFIG_NET5501 is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_GPIO_SODAVILLE is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_BACKLIGHT_OT200 is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_OF_DISPLAY_TIMING is not set
-# CONFIG_OF_VIDEOMODE is not set
-
-# CONFIG_MLX5_INFINIBAND is not set
-# CONFIG_PINCTRL_SINGLE is not set

config-x86-generic

@@ -1,466 +0,0 @@
-CONFIG_UID16=y
-
-CONFIG_X86_EXTENDED_PLATFORM=y
-
-CONFIG_X86_GENERIC=y
-
-CONFIG_HPET=y
-CONFIG_HPET_TIMER=y
-# CONFIG_HPET_MMAP is not set
-
-CONFIG_I8K=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_INTEL_EARLY=y
-CONFIG_MICROCODE_AMD=y
-
-CONFIG_X86_MSR=y
-CONFIG_X86_CPUID=y
-CONFIG_EDD=m
-# CONFIG_EDD_OFF is not set
-
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG_MESSAGES is not set
-
-# CONFIG_NET_SB1000 is not set
-
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_X86_PM_TIMER=y
-
-CONFIG_EFI=y
-CONFIG_EFI_STUB=y
-CONFIG_EFI_VARS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_EFI_VARS_PSTORE=y
-CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
-CONFIG_EFI_PCDP=y
-CONFIG_FB_EFI=y
-# needs FB_SIMPLE to work correctly
-# CONFIG_X86_SYSFB is not set
-
-# FIXME: 32bit only?
-# CONFIG_FB_N411 is not set
-
-CONFIG_INTEL_IOMMU=y
-CONFIG_DMAR_BROKEN_GFX_WA=y
-CONFIG_INTEL_IOMMU_FLOPPY_WA=y
-# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
-CONFIG_SCSI_ADVANSYS=m
-
-CONFIG_CAPI_EICON=y
-
-#
-# Kernel debugging
-#
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_MMIOTRACE_TEST is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-# CONFIG_ACPI_ASUS is not set
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
-# FIXME: Next two are deprecated. Remove them when they disappear upstream
-# CONFIG_ACPI_PROCFS_POWER is not set
-# CONFIG_ACPI_PROC_EVENT is not set
-CONFIG_PNPACPI=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_MEMORY_FAILURE=y
-# CONFIG_ACPI_APEI_EINJ is not set
-CONFIG_ACPI_IPMI=m
-CONFIG_ACPI_CUSTOM_METHOD=m
-CONFIG_ACPI_BGRT=y
-
-CONFIG_X86_INTEL_PSTATE=y
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ_CPB=y
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_AMD_FREQ_SENSITIVITY=m
-CONFIG_X86_P4_CLOCKMOD=m
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-
-#
-# various x86 specific drivers
-#
-CONFIG_NVRAM=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-
-CONFIG_GENERIC_ISA_DMA=y
-
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_IOAPIC=y
-
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_COMPAQ=m
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-CONFIG_HOTPLUG_PCI_IBM=m
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-
-CONFIG_BLK_DEV_AMD74XX=y
-
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_ISMT=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-CONFIG_I2C_DESIGNWARE_CORE=m
-CONFIG_I2C_DESIGNWARE_PLATFORM=m
-
-#rhbz 997149
-# CONFIG_DELL_RBU is not set
-CONFIG_DCDBAS=m
-
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=m
-CONFIG_EDAC_AMD76X=m
-CONFIG_EDAC_AMD8111=m
-CONFIG_EDAC_AMD8131=m
-CONFIG_EDAC_E7XXX=m
-CONFIG_EDAC_E752X=m
-CONFIG_EDAC_I82860=m
-CONFIG_EDAC_I82875P=m
-CONFIG_EDAC_I82975X=m
-CONFIG_EDAC_I3000=m
-CONFIG_EDAC_I3200=m
-CONFIG_EDAC_I5000=m
-CONFIG_EDAC_I5100=m
-CONFIG_EDAC_I5400=m
-CONFIG_EDAC_I7300=m
-CONFIG_EDAC_I7CORE=m
-CONFIG_EDAC_R82600=m
-CONFIG_EDAC_X38=m
-CONFIG_EDAC_MCE_INJ=m
-CONFIG_EDAC_DECODE_MCE=m
-CONFIG_EDAC_LEGACY_SYSFS=y
-
-CONFIG_SCHED_MC=y
-
-CONFIG_SND_ISA=y
-CONFIG_SND_ES18XX=m
-
-CONFIG_TCG_INFINEON=m
-
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-
-# CONFIG_COMPAT_VDSO is not set
-
-CONFIG_X86_PLATFORM_DEVICES=y
-
-CONFIG_AMILO_RFKILL=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_CHROMEOS_LAPTOP=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_FUJITSU_TABLET=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_TOPSTAR_LAPTOP=m
-
-CONFIG_ACPI_WMI=m
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ASUS_WMI=m
-CONFIG_ASUS_NB_WMI=m
-CONFIG_HP_WMI=m
-# CONFIG_INTEL_SCU_IPC is not set
-CONFIG_DELL_WMI=m
-CONFIG_DELL_WMI_AIO=m
-CONFIG_EEEPC_WMI=m
-CONFIG_INTEL_OAKTRAIL=m
-CONFIG_SAMSUNG_Q10=m
-CONFIG_APPLE_GMUX=m
-CONFIG_XO15_EBOOK=m
-CONFIG_INTEL_RST=m
-CONFIG_INTEL_SMARTCONNECT=y
-CONFIG_PVPANIC=m
-
-# CONFIG_TOUCHSCREEN_INTEL_MID is not set
-
-# CONFIG_SMSC37B787_WDT is not set
-CONFIG_W83697HF_WDT=m
-CONFIG_VIA_WDT=m
-CONFIG_IE6XX_WDT=m
-
-CONFIG_CRASH_DUMP=y
-CONFIG_PROC_VMCORE=y
-CONFIG_CRASH=m
-
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_DEVICE_ASSIGNMENT=y
-CONFIG_LGUEST=m
-CONFIG_LGUEST_GUEST=y
-
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_TIME_ACCOUNTING=y
-# CONFIG_PARAVIRT_DEBUG is not set
-
-# PARAVIRT_SPINLOCKS has a 5% perf hit on native hw (see kconfig)
-# CONFIG_PARAVIRT_SPINLOCKS is not set
-
-CONFIG_KVM_CLOCK=y
-CONFIG_KVM_GUEST=y
-CONFIG_KVM_MMU_AUDIT=y # default $x would be nice...
-# CONFIG_KVM_DEBUG_FS is not set
-
-CONFIG_XEN=y
-# CONFIG_XEN_DEBUG is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_SCRUB_PAGES=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_BLKDEV_FRONTEND=m
-CONFIG_XEN_NETDEV_FRONTEND=m
-CONFIG_XEN_NETDEV_BACKEND=m
-CONFIG_XEN_WDT=m
-CONFIG_XEN_GRANT_DEV_ALLOC=m
-CONFIG_XEN_PCIDEV_FRONTEND=m
-CONFIG_XENFS=m
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_BACKEND=y
-CONFIG_XEN_BLKDEV_BACKEND=m
-CONFIG_XEN_DEBUG_FS=y
-CONFIG_XEN_PLATFORM_PCI=y
-CONFIG_XEN_GNTDEV=m
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
-CONFIG_XEN_SELFBALLOONING=y
-CONFIG_XEN_PCIDEV_BACKEND=m
-CONFIG_XEN_ACPI_PROCESSOR=m
-
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-CONFIG_THINKPAD_ACPI=m
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-
-CONFIG_MACINTOSH_DRIVERS=y
-
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=y
-
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOATDMA=m
-
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_FAM15H_POWER=m
-CONFIG_SENSORS_ACPI_POWER=m
-
-# CONFIG_CPA_DEBUG is not set
-
-CONFIG_HP_WATCHDOG=m
-CONFIG_NV_TCO=m
-CONFIG_SP5100_TCO=m
-
-# CONFIG_NO_BOOTMEM is not set
-
-# CONFIG_MEMTEST is not set
-# CONFIG_DEBUG_TLBFLUSH is not set
-# CONFIG_MAXSMP is not set
-
-
-CONFIG_HP_ILO=m
-
-CONFIG_BACKLIGHT_APPLE=m
-
-
-CONFIG_X86_CHECK_BIOS_CORRUPTION=y
-
-# CONFIG_CMDLINE_BOOL is not set
-
-
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-
-
-# CONFIG_IOMMU_STRESS is not set
-
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_INJECT=m
-
-CONFIG_SFI=y
-
-CONFIG_I2C_SCMI=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-
-CONFIG_X86_DECODER_SELFTEST=y
-
-CONFIG_ACPI_CMPC=m
-CONFIG_MSI_WMI=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_LPC_SCH=m
-CONFIG_LPC_ICH=m
-
-CONFIG_GPIO_ICH=m
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_F7188X is not set
-
-
-CONFIG_PCI_CNB20LE_QUIRK=y
-
-CONFIG_ACPI_EC_DEBUGFS=m
-# CONFIG_ACPI_APEI_ERST_DEBUG is not set
-# CONFIG_ACPI_QUICKSTART is not set
-
-CONFIG_INTEL_IDLE=y
-
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-CONFIG_F71808E_WDT=m
-CONFIG_HPWDT_NMI_DECODING=y
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_INTEL_MID_DMAC is not set
-CONFIG_PCH_DMA=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-
-CONFIG_VIDEO_VIA_CAMERA=m
-
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_X86_RESERVE_LOW=64
-
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-
-CONFIG_PCH_GBE=m
-CONFIG_PCH_PHUB=m
-
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_SERPENT_SSE2_586=m
-CONFIG_CRYPTO_CRC32_PCLMUL=m
-
-CONFIG_HP_ACCEL=m
-
-# CONFIG_RAPIDIO is not set
-
-CONFIG_SCHED_SMT=y
-CONFIG_CC_STACKPROTECTOR=y
-CONFIG_RELOCATABLE=y
-
-CONFIG_HYPERV=m
-CONFIG_HYPERV_UTILS=m
-CONFIG_HID_HYPERV_MOUSE=m
-CONFIG_HYPERV_NET=m
-CONFIG_HYPERV_STORAGE=m
-CONFIG_HYPERV_BALLOON=m
-CONFIG_FB_HYPERV=m
-
-# Depends on HOTPLUG_PCI_PCIE
-CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
-
-CONFIG_DRM_GMA500=m
-# CONFIG_DRM_GMA600 is not set
-CONFIG_DRM_GMA3600=y
-
-CONFIG_RCU_FANOUT_LEAF=16
-
-CONFIG_INTEL_MEI=m
-CONFIG_INTEL_MEI_ME=m
-
-CONFIG_NFC_MEI_PHY=m
-CONFIG_NFC_PN544_MEI=m
-CONFIG_NFC_MICROREAD_MEI=m
-
-# Maybe enable in debug kernels?
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-
-CONFIG_X86_INTEL_LPSS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BAYTRAIL=y
-
-# CONFIG_INTEL_POWERCLAMP is not set
-CONFIG_X86_PKG_TEMP_THERMAL=m
-
-CONFIG_VMWARE_VMCI=m
-CONFIG_VMWARE_VMCI_VSOCKETS=m
-
-CONFIG_XZ_DEC_X86=y
-
-CONFIG_MPILIB=y
-CONFIG_SYSTEM_TRUSTED_KEYRING=y
-CONFIG_SYSTEM_BLACKLIST_KEYRING=y
-CONFIG_MODULE_SIG=y
-CONFIG_MODULE_SIG_ALL=y
-# CONFIG_MODULE_SIG_SHA1 is not set
-CONFIG_MODULE_SIG_SHA256=y
-# CONFIG_MODULE_SIG_FORCE is not set
-CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE=y
-CONFIG_EFI_SIGNATURE_LIST_PARSER=y
-
-CONFIG_MODULE_SIG_UEFI=y
-
-CONFIG_VMXNET3=m
-CONFIG_VFIO_PCI_VGA=y
-
-# CONFIG_NTB is not set

config-x86_64-generic

@@ -1,169 +0,0 @@
-CONFIG_64BIT=y
-
-# CONFIG_X86_X32 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-CONFIG_GENERIC_CPU=y
-
-# CONFIG_X86_VSMP is not set
-# CONFIG_X86_UV is not set
-CONFIG_NUMA=y
-CONFIG_K8_NUMA=y
-CONFIG_AMD_NUMA=y
-CONFIG_X86_64_ACPI_NUMA=y
-# CONFIG_NUMA_EMU is not set
-# CONFIG_X86_NUMACHIP is not set
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_NUMA_BALANCING=y
-
-# https://lists.fedoraproject.org/pipermail/kernel/2013-November/004601.html
-CONFIG_NR_CPUS=1024
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_PHYSICAL_ALIGN=0x1000000
-
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-
-CONFIG_AMD_IOMMU=y
-CONFIG_AMD_IOMMU_STATS=y
-CONFIG_AMD_IOMMU_V2=m
-# CONFIG_IOMMU_DEBUG is not set
-CONFIG_SWIOTLB=y
-# CONFIG_CALGARY_IOMMU is not set
-
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_MEM_SOFT_DIRTY=y
-
-CONFIG_KEXEC_JUMP=y
-
-CONFIG_ACPI_BLACKLIST_YEAR=0
-CONFIG_ACPI_HOTPLUG_MEMORY=y
-
-# CONFIG_INTEL_SCU_IPC is not set
-
-# SHPC has half-arsed PCI probing, which makes it load on too many systems
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
-CONFIG_CRYPTO_TWOFISH_X86_64=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-CONFIG_CRYPTO_SHA1_SSSE3=m
-CONFIG_CRYPTO_SHA256_SSSE3=m
-CONFIG_CRYPTO_SHA512_SSSE3=m
-CONFIG_CRYPTO_BLOWFISH_X86_64=m
-CONFIG_CRYPTO_BLOWFISH_AVX2_X86_64=m
-CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
-CONFIG_CRYPTO_CAMELLIA_X86_64=m
-CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
-CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
-CONFIG_CRYPTO_CAST5_AVX_X86_64=m
-CONFIG_CRYPTO_CAST6_AVX_X86_64=m
-CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
-CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
-CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
-CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
-CONFIG_CRYPTO_TWOFISH_AVX2_X86_64=m
-
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-
-CONFIG_EDAC_AMD64=m
-# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
-CONFIG_EDAC_SBRIDGE=m
-
-# CONFIG_PC8736x_GPIO is not set
-
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-# CONFIG_MOVABLE_NODE is not set
-# CONFIG_MEMORY_HOTPLUG is not set
-# CONFIG_MEMORY_HOTREMOVE is not set
-
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-
-CONFIG_SGI_IOC4=m
-CONFIG_SGI_XP=m
-CONFIG_SGI_GRU=m
-# CONFIG_SGI_GRU_DEBUG is not set
-
-# CONFIG_VIDEO_CAFE_CCIC is not set
-
-CONFIG_XEN_MAX_DOMAIN_MEMORY=128
-# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
-CONFIG_XEN_DEV_EVTCHN=m
-CONFIG_XEN_SYS_HYPERVISOR=y
-# CONFIG_XEN_MCE_LOG is not set
-# CONFIG_XEN_STUB is not set
-
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-
-CONFIG_FRAME_WARN=2048
-
-CONFIG_NODES_SHIFT=9
-
-CONFIG_DIRECT_GBPAGES=y
-
-CONFIG_X86_MPPARSE=y
-
-CONFIG_I7300_IDLE=m
-CONFIG_IRQ_REMAP=y
-
-CONFIG_X86_X2APIC=y
-CONFIG_SPARSE_IRQ=y
-
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_USER_QS is not set
-
-CONFIG_INTEL_TXT=y
-
-CONFIG_GPIO_LANGWELL=y
-
-CONFIG_FUNCTION_GRAPH_TRACER=y
-
-CONFIG_I7300_IDLE=m
-
-CONFIG_BPF_JIT=y
-
-# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
-CONFIG_CHECKPOINT_RESTORE=y
-
-# Should be 32bit only, but lacks KConfig depends
-# CONFIG_XO15_EBOOK is not set
-
-CONFIG_NTB=m
-CONFIG_NTB_NETDEV=m
-
-CONFIG_SFC=m
-CONFIG_SFC_MCDI_MON=y
-CONFIG_SFC_SRIOV=y
-CONFIG_SFC_PTP=y
-
-# 10GigE
-#
-CONFIG_IP1000=m
-CONFIG_MLX4_EN=m
-CONFIG_MLX4_EN_DCB=y
-# CONFIG_MLX4_DEBUG is not set
-CONFIG_SFC=m
-CONFIG_SFC_MCDI_MON=y
-CONFIG_SFC_SRIOV=y
-CONFIG_SFC_PTP=y
-CONFIG_SFC_MTD=y
-# Override MTD stuff because SFC_MTD needs it
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-

cpupower-Fix-segfault-due-to-incorrect-getopt_long-a.patch

@@ -1,40 +0,0 @@
-From cb8e390d258b7f8073afafcbb163976e27346e9d Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Fri, 11 Oct 2013 08:37:53 -0400
-Subject: [PATCH] cpupower: Fix segfault due to incorrect getopt_long arugments
-
-If a user calls 'cpupower set --perf-bias 15', the process will end with a
-SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi call.
-This is because the getopt_long structure currently has all of the options
-as having an optional_argument when they really have a required argument.
-We change the structure to use required_argument to match the short options
-and it resolves the issue.
-
-This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- tools/power/cpupower/utils/cpupower-set.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c
-index dc4de37..bcf1d2f 100644
---- a/tools/power/cpupower/utils/cpupower-set.c
-+++ b/tools/power/cpupower/utils/cpupower-set.c
-@@ -18,9 +18,9 @@
- #include "helpers/bitmask.h"
- 
- static struct option set_opts[] = {
--	{ .name = "perf-bias",	.has_arg = optional_argument,	.flag = NULL,	.val = 'b'},
--	{ .name = "sched-mc",	.has_arg = optional_argument,	.flag = NULL,	.val = 'm'},
--	{ .name = "sched-smt",	.has_arg = optional_argument,	.flag = NULL,	.val = 's'},
-+	{ .name = "perf-bias",	.has_arg = required_argument,	.flag = NULL,	.val = 'b'},
-+	{ .name = "sched-mc",	.has_arg = required_argument,	.flag = NULL,	.val = 'm'},
-+	{ .name = "sched-smt",	.has_arg = required_argument,	.flag = NULL,	.val = 's'},
- 	{ },
- };
- 
--- 
-1.8.3.1
-

crash-driver.patch

@@ -1,490 +0,0 @@
-From 9fcd8dd1ccc20ea8d466d48e887e92b832e22d56 Mon Sep 17 00:00:00 2001
-From: Kyle McMartin <kyle@dreadnought.bos.jkkm.org>
-Date: Tue, 5 Nov 2013 13:16:00 -0500
-Subject: [PATCH] crash-driver
-
----
- arch/arm/include/asm/crash.h     |   6 ++
- arch/arm64/include/asm/crash.h   |   6 ++
- arch/ia64/include/asm/crash.h    |  90 +++++++++++++++++++++++++++
- arch/ia64/kernel/ia64_ksyms.c    |   3 +
- arch/powerpc/include/asm/crash.h |   6 ++
- arch/s390/include/asm/crash.h    |  60 ++++++++++++++++++
- arch/x86/include/asm/crash.h     |   6 ++
- drivers/char/Kconfig             |   3 +
- drivers/char/Makefile            |   2 +
- drivers/char/crash.c             | 128 +++++++++++++++++++++++++++++++++++++++
- include/asm-generic/crash.h      |  72 ++++++++++++++++++++++
- 11 files changed, 382 insertions(+)
- create mode 100644 arch/arm/include/asm/crash.h
- create mode 100644 arch/arm64/include/asm/crash.h
- create mode 100644 arch/ia64/include/asm/crash.h
- create mode 100644 arch/powerpc/include/asm/crash.h
- create mode 100644 arch/s390/include/asm/crash.h
- create mode 100644 arch/x86/include/asm/crash.h
- create mode 100644 drivers/char/crash.c
- create mode 100644 include/asm-generic/crash.h
-
-diff --git a/arch/arm/include/asm/crash.h b/arch/arm/include/asm/crash.h
-new file mode 100644
-index 0000000..1d2e537
---- /dev/null
-+++ b/arch/arm/include/asm/crash.h
-@@ -0,0 +1,6 @@
-+#ifndef _ARM_CRASH_H
-+#define _ARM_CRASH_H
-+
-+#include <asm-generic/crash.h>
-+
-+#endif /* _ARM_CRASH_H */
-diff --git a/arch/arm64/include/asm/crash.h b/arch/arm64/include/asm/crash.h
-new file mode 100644
-index 0000000..a7fcc28
---- /dev/null
-+++ b/arch/arm64/include/asm/crash.h
-@@ -0,0 +1,6 @@
-+#ifndef _ARM64_CRASH_H
-+#define _ARM64_CRASH_H
-+
-+#include <asm-generic/crash.h>
-+
-+#endif /* _ARM64_CRASH_H */
-diff --git a/arch/ia64/include/asm/crash.h b/arch/ia64/include/asm/crash.h
-new file mode 100644
-index 0000000..28bd955
---- /dev/null
-+++ b/arch/ia64/include/asm/crash.h
-@@ -0,0 +1,90 @@
-+#ifndef _ASM_IA64_CRASH_H
-+#define _ASM_IA64_CRASH_H
-+
-+/*
-+ * linux/include/asm-ia64/crash.h
-+ *
-+ * Copyright (c) 2004 Red Hat, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/efi.h>
-+#include <linux/mm.h>
-+#include <asm/mmzone.h>
-+
-+static inline void *
-+map_virtual(u64 offset, struct page **pp)
-+{
-+	struct page *page;
-+	unsigned long pfn;
-+	u32 type;
-+
-+	if (REGION_NUMBER(offset) == 5) {
-+		char byte;
-+
-+		if (__get_user(byte, (char *)offset) == 0)
-+			return (void *)offset;
-+		else
-+			return NULL;
-+	}
-+
-+	switch (type = efi_mem_type(offset))
-+	{
-+	case EFI_LOADER_CODE:
-+	case EFI_LOADER_DATA:
-+	case EFI_BOOT_SERVICES_CODE:
-+	case EFI_BOOT_SERVICES_DATA:
-+	case EFI_CONVENTIONAL_MEMORY:
-+		break;
-+
-+	default:
-+		printk(KERN_INFO
-+		    "crash memory driver: invalid memory type for %lx: %d\n",
-+			offset, type);
-+		return NULL;
-+	}
-+
-+	pfn = offset >> PAGE_SHIFT;
-+
-+	if (!pfn_valid(pfn)) {
-+		printk(KERN_INFO
-+			"crash memory driver: invalid pfn: %lx )\n", pfn);
-+		return NULL;
-+	}
-+
-+	page = pfn_to_page(pfn);
-+
-+	if (!page->virtual) {
-+		printk(KERN_INFO
-+		    "crash memory driver: offset: %lx page: %lx page->virtual: NULL\n",
-+			offset, (unsigned long)page);
-+		return NULL;
-+	}
-+
-+	return (page->virtual + (offset & (PAGE_SIZE-1)));
-+}
-+
-+static inline void unmap_virtual(struct page *page)
-+{
-+	return;
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_IA64_CRASH_H */
-diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
-index 5b7791d..aee4b87 100644
---- a/arch/ia64/kernel/ia64_ksyms.c
-+++ b/arch/ia64/kernel/ia64_ksyms.c
-@@ -84,6 +84,9 @@ EXPORT_SYMBOL(ia64_save_scratch_fpregs);
- #include <asm/unwind.h>
- EXPORT_SYMBOL(unw_init_running);
- 
-+#include <linux/efi.h>
-+EXPORT_SYMBOL_GPL(efi_mem_type);
-+
- #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
- extern void esi_call_phys (void);
- EXPORT_SYMBOL_GPL(esi_call_phys);
-diff --git a/arch/powerpc/include/asm/crash.h b/arch/powerpc/include/asm/crash.h
-new file mode 100644
-index 0000000..daa8c4d
---- /dev/null
-+++ b/arch/powerpc/include/asm/crash.h
-@@ -0,0 +1,6 @@
-+#ifndef _PPC64_CRASH_H
-+#define _PPC64_CRASH_H
-+
-+#include <asm-generic/crash.h>
-+
-+#endif /* _PPC64_CRASH_H */
-diff --git a/arch/s390/include/asm/crash.h b/arch/s390/include/asm/crash.h
-new file mode 100644
-index 0000000..552be5e
---- /dev/null
-+++ b/arch/s390/include/asm/crash.h
-@@ -0,0 +1,60 @@
-+#ifndef _S390_CRASH_H
-+#define _S390_CRASH_H
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+
-+/*
-+ * For swapped prefix pages get bounce buffer using xlate_dev_mem_ptr()
-+ */
-+static inline void *map_virtual(u64 offset, struct page **pp)
-+{
-+	struct page *page;
-+	unsigned long pfn;
-+	void *vaddr;
-+
-+	vaddr = xlate_dev_mem_ptr(offset);
-+	pfn = ((unsigned long) vaddr) >> PAGE_SHIFT;
-+	if ((unsigned long) vaddr != offset)
-+		page = pfn_to_page(pfn);
-+	else
-+		page = NULL;
-+
-+	if (!page_is_ram(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
-+		return NULL;
-+	}
-+
-+	if (!pfn_valid(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: invalid pfn: %lx )\n", pfn);
-+		return NULL;
-+	}
-+
-+	*pp = page;
-+	return vaddr;
-+}
-+
-+/*
-+ * Free bounce buffer if necessary
-+ */
-+static inline void unmap_virtual(struct page *page)
-+{
-+	void *vaddr;
-+
-+	if (page) {
-+		/*
-+		 * Because for bounce buffers vaddr will never be 0
-+		 * unxlate_dev_mem_ptr() will always free the bounce buffer.
-+		 */
-+		vaddr = (void *)(page_to_pfn(page) << PAGE_SHIFT);
-+		unxlate_dev_mem_ptr(0, vaddr);
-+	}
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _S390_CRASH_H */
-diff --git a/arch/x86/include/asm/crash.h b/arch/x86/include/asm/crash.h
-new file mode 100644
-index 0000000..27a4156
---- /dev/null
-+++ b/arch/x86/include/asm/crash.h
-@@ -0,0 +1,6 @@
-+#ifndef _X86_CRASH_H
-+#define _X86_CRASH_H
-+
-+#include <asm-generic/crash.h>
-+
-+#endif /* _X86_CRASH_H */
-diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
-index 1421997..72a8b74 100644
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -4,6 +4,9 @@
- 
- menu "Character devices"
- 
-+config CRASH
-+	tristate "Crash Utility memory driver"
-+
- source "drivers/tty/Kconfig"
- 
- config DEVKMEM
-diff --git a/drivers/char/Makefile b/drivers/char/Makefile
-index 7ff1d0d..3ed67af 100644
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -62,3 +62,5 @@ obj-$(CONFIG_JS_RTC)		+= js-rtc.o
- js-rtc-y = rtc.o
- 
- obj-$(CONFIG_TILE_SROM)		+= tile-srom.o
-+
-+obj-$(CONFIG_CRASH)            += crash.o
-diff --git a/drivers/char/crash.c b/drivers/char/crash.c
-new file mode 100644
-index 0000000..a142bb3
---- /dev/null
-+++ b/drivers/char/crash.c
-@@ -0,0 +1,128 @@
-+/*
-+ *  linux/drivers/char/crash.c
-+ *
-+ *  Copyright (C) 2004  Dave Anderson <anderson@redhat.com>
-+ *  Copyright (C) 2004  Red Hat, Inc.
-+ */
-+
-+/******************************************************************************
-+ *
-+ *   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2, or (at your option)
-+ *   any later version.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *****************************************************************************/
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/types.h>
-+#include <asm/crash.h>
-+
-+#define CRASH_VERSION   "1.0"
-+
-+/*
-+ *  These are the file operation functions that allow crash utility
-+ *  access to physical memory.
-+ */
-+
-+static loff_t
-+crash_llseek(struct file * file, loff_t offset, int orig)
-+{
-+	switch (orig) {
-+	case 0:
-+		file->f_pos = offset;
-+		return file->f_pos;
-+	case 1:
-+		file->f_pos += offset;
-+		return file->f_pos;
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+/*
-+ *  Determine the page address for an address offset value,
-+ *  get a virtual address for it, and copy it out.
-+ *  Accesses must fit within a page.
-+ */
-+static ssize_t
-+crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
-+{
-+	void *vaddr;
-+	struct page *page;
-+	u64 offset;
-+	ssize_t read;
-+
-+	offset = *poff;
-+	if (offset >> PAGE_SHIFT != (offset+count-1) >> PAGE_SHIFT)
-+		return -EINVAL;
-+
-+	vaddr = map_virtual(offset, &page);
-+	if (!vaddr)
-+		return -EFAULT;
-+
-+	if (copy_to_user(buf, vaddr, count)) {
-+		unmap_virtual(page);
-+		return -EFAULT;
-+	}
-+	unmap_virtual(page);
-+
-+	read = count;
-+	*poff += read;
-+	return read;
-+}
-+
-+static struct file_operations crash_fops = {
-+	.owner = THIS_MODULE,
-+	.llseek = crash_llseek,
-+	.read = crash_read,
-+};
-+
-+static struct miscdevice crash_dev = {
-+	MISC_DYNAMIC_MINOR,
-+	"crash",
-+	&crash_fops
-+};
-+
-+static int __init
-+crash_init(void)
-+{
-+	int ret;
-+
-+	ret = misc_register(&crash_dev);
-+	if (ret) {
-+		printk(KERN_ERR
-+		    "crash memory driver: cannot misc_register (MISC_DYNAMIC_MINOR)\n");
-+		goto out;
-+	}
-+
-+	ret = 0;
-+	printk(KERN_INFO "crash memory driver: version %s\n", CRASH_VERSION);
-+out:
-+	return ret;
-+}
-+
-+static void __exit
-+crash_cleanup_module(void)
-+{
-+	misc_deregister(&crash_dev);
-+}
-+
-+module_init(crash_init);
-+module_exit(crash_cleanup_module);
-+
-+MODULE_LICENSE("GPL");
-diff --git a/include/asm-generic/crash.h b/include/asm-generic/crash.h
-new file mode 100644
-index 0000000..8a0a69a
---- /dev/null
-+++ b/include/asm-generic/crash.h
-@@ -0,0 +1,72 @@
-+#ifndef __CRASH_H__
-+#define __CRASH_H__
-+
-+/*
-+ * include/linux/crash.h
-+ *
-+ * Copyright (c) 2013 Red Hat, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+
-+static inline void *
-+map_virtual(u64 offset, struct page **pp)
-+{
-+	struct page *page;
-+	unsigned long pfn;
-+	void *vaddr;
-+
-+	pfn = (unsigned long)(offset >> PAGE_SHIFT);
-+
-+	if (!page_is_ram(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
-+		return NULL;
-+	}
-+
-+	if (!pfn_valid(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: invalid pfn: %lx )\n", pfn);
-+		return NULL;
-+	}
-+
-+	page = pfn_to_page(pfn);
-+
-+	vaddr = kmap(page);
-+	if (!vaddr) {
-+		printk(KERN_INFO
-+		    "crash memory driver: pfn: %lx kmap(page: %lx) failed\n",
-+			pfn, (unsigned long)page);
-+		return NULL;
-+	}
-+
-+	*pp = page;
-+	return (vaddr + (offset & (PAGE_SIZE-1)));
-+}
-+
-+static inline void unmap_virtual(struct page *page)
-+{
-+	kunmap(page);
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* __CRASH_H__ */
--- 
-1.8.3.1
-

criu-no-expert.patch

@@ -1,22 +0,0 @@
-diff --git a/init/Kconfig b/init/Kconfig
-index be8b7f5..7461760 100644
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -989,7 +989,7 @@ config DEBUG_BLK_CGROUP
- endif # CGROUPS
- 
- config CHECKPOINT_RESTORE
--	bool "Checkpoint/restore support" if EXPERT
-+	bool "Checkpoint/restore support"
- 	default n
- 	help
- 	  Enables additional kernel features in a sake of checkpoint/restore.
-@@ -1000,7 +1000,7 @@ config CHECKPOINT_RESTORE
- 	  If unsure, say N here.
- 
- menuconfig NAMESPACES
--	bool "Namespaces support" if EXPERT
-+	bool "Namespaces support"
- 	default !EXPERT
- 	help
- 	  Provides the way to make tasks work with different objects using

defaults-acpi-video.patch

@@ -1,13 +0,0 @@
-diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
-index eaef02a..2029819 100644
---- a/drivers/acpi/video.c
-+++ b/drivers/acpi/video.c
-@@ -69,7 +69,7 @@ MODULE_AUTHOR("Bruno Ducrot");
- MODULE_DESCRIPTION("ACPI Video Driver");
- MODULE_LICENSE("GPL");
- 
--static bool brightness_switch_enabled = 1;
-+static bool brightness_switch_enabled = 0;
- module_param(brightness_switch_enabled, bool, 0644);
- 
- /*

die-floppy-die.patch

@@ -1,30 +0,0 @@
-From 4ff58b642f80dedb20533978123d89b5ac9b1ed5 Mon Sep 17 00:00:00 2001
-From: Kyle McMartin <kyle@phobos.i.jkkm.org>
-Date: Tue, 30 Mar 2010 00:04:29 -0400
-Subject: die-floppy-die
-
-Kill the floppy.ko pnp modalias. We were surviving just fine without
-autoloading floppy drivers, tyvm.
-
-Please feel free to register all complaints in the wastepaper bin.
----
- drivers/block/floppy.c |    3 +--
- 1 files changed, 1 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
-index 90c4038..f4a0b90 100644
---- a/drivers/block/floppy.c
-+++ b/drivers/block/floppy.c
-@@ -4619,8 +4619,7 @@ static const struct pnp_device_id floppy_pnpids[] = {
- 	{"PNP0700", 0},
- 	{}
- };
--
--MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
-+/* MODULE_DEVICE_TABLE(pnp, floppy_pnpids); */
- 
- #else
- 
--- 
-1.7.0.1
-

disable-i8042-check-on-apple-mac.patch

@@ -1,59 +0,0 @@
-From 2a79554c864ac58fa2ad982f0fcee2cc2aa33eb5 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Thu, 20 May 2010 10:30:31 -0400
-Subject: Disable i8042 checks on Intel Apple Macs
-
-As those computers never had any i8042 controllers, and the
-current lookup code could potentially lock up/hang/wait for
-timeout for long periods of time.
-
-Fixes intermittent hangs on boot on a MacbookAir1,1
-
-Signed-off-by: Bastien Nocera <hadess@hadess.net>
----
- drivers/input/serio/i8042.c |   22 ++++++++++++++++++++++
- 1 files changed, 22 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
-index 6440a8f..4d7cf98 100644
---- a/drivers/input/serio/i8042.c
-+++ b/drivers/input/serio/i8042.c
-@@ -1451,6 +1451,22 @@ static struct platform_driver i8042_driver = {
- 	.shutdown	= i8042_shutdown,
- };
- 
-+#ifdef CONFIG_DMI
-+static struct dmi_system_id __initdata dmi_system_table[] = {
-+	{
-+		.matches = {
-+			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Computer, Inc.")
-+		},
-+	},
-+	{
-+		.matches = {
-+			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Inc.")
-+		},
-+	},
-+	{}
-+};
-+#endif /*CONFIG_DMI*/
-+
- static int __init i8042_init(void)
- {
- 	struct platform_device *pdev;
-@@ -1458,6 +1474,12 @@ static int __init i8042_init(void)
- 
- 	dbg_init();
- 
-+#ifdef CONFIG_DMI
-+	/* Intel Apple Macs never have an i8042 controller */
-+	if (dmi_check_system(dmi_system_table) > 0)
-+		return -ENODEV;
-+#endif /*CONFIG_DMI*/
-+
- 	err = i8042_platform_init();
- 	if (err)
- 		return err;
--- 
-1.7.0.1
-

dm-cache-policy-mq_fix-large-scale-table-allocation-bug.patch

@@ -1,31 +0,0 @@
-diff --git a/drivers/md/dm-cache-policy-mq.c b/drivers/md/dm-cache-policy-mq.c
-index cab6dd2..ec79c8f 100644
---- a/drivers/md/dm-cache-policy-mq.c
-+++ b/drivers/md/dm-cache-policy-mq.c
-@@ -868,7 +868,7 @@ static void mq_destroy(struct dm_cache_policy *p)
- 	struct mq_policy *mq = to_mq_policy(p);
- 
- 	free_bitset(mq->allocation_bitset);
--	kfree(mq->table);
-+	vfree(mq->table);
- 	free_entries(mq);
- 	kfree(mq);
- }
-@@ -1189,7 +1189,7 @@ static struct dm_cache_policy *mq_create(dm_cblock_t cache_size,
- 
- 	mq->nr_buckets = next_power(from_cblock(cache_size) / 2, 16);
- 	mq->hash_bits = ffs(mq->nr_buckets) - 1;
--	mq->table = kzalloc(sizeof(*mq->table) * mq->nr_buckets, GFP_KERNEL);
-+	mq->table = vzalloc(sizeof(*mq->table) * mq->nr_buckets);
- 	if (!mq->table)
- 		goto bad_alloc_table;
- 
-@@ -1200,7 +1200,7 @@ static struct dm_cache_policy *mq_create(dm_cblock_t cache_size,
- 	return &mq->policy;
- 
- bad_alloc_bitset:
--	kfree(mq->table);
-+	vfree(mq->table);
- bad_alloc_table:
- 	free_entries(mq);
- bad_cache_alloc:

drm-i915-dp-stfu.patch

@@ -1,53 +0,0 @@
-diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
-index fb2fbc1..0aaf67d 100644
---- a/drivers/gpu/drm/i915/intel_dp.c
-+++ b/drivers/gpu/drm/i915/intel_dp.c
-@@ -283,7 +283,7 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
- 	pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
- 
- 	if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) {
--		WARN(1, "eDP powered off while attempting aux channel communication.\n");
-+		DRM_ERROR("eDP powered off while attempting aux channel communication.\n");
- 		DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
- 				I915_READ(pp_stat_reg),
- 				I915_READ(pp_ctrl_reg));
-@@ -376,7 +376,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
- 	}
- 
- 	if (try == 3) {
--		WARN(1, "dp_aux_ch not started status 0x%08x\n",
-+		DRM_ERROR("dp_aux_ch not started status 0x%08x\n",
- 		     I915_READ(ch_ctl));
- 		ret = -EBUSY;
- 		goto out;
-@@ -995,8 +995,8 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
- 		return;
- 	DRM_DEBUG_KMS("Turn eDP VDD on\n");
- 
--	WARN(intel_dp->want_panel_vdd,
--	     "eDP VDD already requested on\n");
-+	if (intel_dp->want_panel_vdd)
-+		DRM_ERROR("eDP VDD already requested on\n");
- 
- 	intel_dp->want_panel_vdd = true;
- 
-@@ -1070,7 +1070,8 @@ void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
- 		return;
- 
- 	DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd);
--	WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on");
-+	if (!intel_dp->want_panel_vdd)
-+		DRM_ERROR("eDP VDD not forced on");
- 
- 	intel_dp->want_panel_vdd = false;
- 
-@@ -1144,7 +1145,8 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
- 
- 	DRM_DEBUG_KMS("Turn eDP power off\n");
- 
--	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
-+	if (!intel_dp->want_panel_vdd)
-+		DRM_ERROR("Need VDD to turn off panel\n");
- 
- 	pp = ironlake_get_pp_control(intel_dp);
- 	/* We need to switch off panel power _and_ force vdd, for otherwise some

drm-qxl-backport-fixes-for-Fedora.patch

@@ -1,226 +0,0 @@
-Bugzilla: N/A
-Upstream-status: Queued for 3.13
-
-From db8edc33193879f39c1b52521e20f4d6eb4e9858 Mon Sep 17 00:00:00 2001
-From: Dave Airlie <airlied@redhat.com>
-Date: Fri, 08 Nov 2013 06:36:45 +0000
-Subject: drm/qxl: backport fixes for Fedora
-
-This pulls these changes from drm-next back into Fedora.
-
-drm/qxl: prefer the monitor config resolution (b080742393e2c1)
-drm/qxl: remove unnecessary check (a40a60d912a101e8dfb08ee1)
-drm/qxl: fix disabling extra monitors from client (5cab51cb3381157)
-qxl: avoid an oops in the deferred io code. (cc87509d87696d7cd39)
-drm/qxl: support 64bit surface bar (35541782dcc1e502)
-qxl: add a connector property to denote hotplug should rescan modes. (4695b03970df37)
-
-Signed-off-by: Dave Airlie <airlied@redhat.com>
----
-diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
-index 835caba..1d975eb 100644
---- a/drivers/gpu/drm/qxl/qxl_display.c
-+++ b/drivers/gpu/drm/qxl/qxl_display.c
-@@ -110,7 +110,9 @@ void qxl_display_read_client_monitors_config(struct qxl_device *qdev)
- 	drm_helper_hpd_irq_event(qdev->ddev);
- }
- 
--static int qxl_add_monitors_config_modes(struct drm_connector *connector)
-+static int qxl_add_monitors_config_modes(struct drm_connector *connector,
-+                                         unsigned *pwidth,
-+                                         unsigned *pheight)
- {
- 	struct drm_device *dev = connector->dev;
- 	struct qxl_device *qdev = dev->dev_private;
-@@ -126,11 +128,15 @@ static int qxl_add_monitors_config_modes(struct drm_connector *connector)
- 	mode = drm_cvt_mode(dev, head->width, head->height, 60, false, false,
- 			    false);
- 	mode->type |= DRM_MODE_TYPE_PREFERRED;
-+	*pwidth = head->width;
-+	*pheight = head->height;
- 	drm_mode_probed_add(connector, mode);
- 	return 1;
- }
- 
--static int qxl_add_common_modes(struct drm_connector *connector)
-+static int qxl_add_common_modes(struct drm_connector *connector,
-+                                unsigned pwidth,
-+                                unsigned pheight)
- {
- 	struct drm_device *dev = connector->dev;
- 	struct drm_display_mode *mode = NULL;
-@@ -159,12 +165,9 @@ static int qxl_add_common_modes(struct drm_connector *connector)
- 	};
- 
- 	for (i = 0; i < ARRAY_SIZE(common_modes); i++) {
--		if (common_modes[i].w < 320 || common_modes[i].h < 200)
--			continue;
--
- 		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h,
- 				    60, false, false, false);
--		if (common_modes[i].w == 1024 && common_modes[i].h == 768)
-+		if (common_modes[i].w == pwidth && common_modes[i].h == pheight)
- 			mode->type |= DRM_MODE_TYPE_PREFERRED;
- 		drm_mode_probed_add(connector, mode);
- 	}
-@@ -720,16 +723,18 @@ static int qxl_conn_get_modes(struct drm_connector *connector)
- {
- 	int ret = 0;
- 	struct qxl_device *qdev = connector->dev->dev_private;
-+	unsigned pwidth = 1024;
-+	unsigned pheight = 768;
- 
- 	DRM_DEBUG_KMS("monitors_config=%p\n", qdev->monitors_config);
- 	/* TODO: what should we do here? only show the configured modes for the
- 	 * device, or allow the full list, or both? */
- 	if (qdev->monitors_config && qdev->monitors_config->count) {
--		ret = qxl_add_monitors_config_modes(connector);
-+		ret = qxl_add_monitors_config_modes(connector, &pwidth, &pheight);
- 		if (ret < 0)
- 			return ret;
- 	}
--	ret += qxl_add_common_modes(connector);
-+	ret += qxl_add_common_modes(connector, pwidth, pheight);
- 	return ret;
- }
- 
-@@ -793,7 +798,10 @@ static enum drm_connector_status qxl_conn_detect(
- 		     qdev->client_monitors_config->count > output->index &&
- 		     qxl_head_enabled(&qdev->client_monitors_config->heads[output->index]));
- 
--	DRM_DEBUG("\n");
-+	DRM_DEBUG("#%d connected: %d\n", output->index, connected);
-+	if (!connected)
-+		qxl_monitors_config_set(qdev, output->index, 0, 0, 0, 0, 0);
-+
- 	return connected ? connector_status_connected
- 			 : connector_status_disconnected;
- }
-@@ -835,8 +843,21 @@ static const struct drm_encoder_funcs qxl_enc_funcs = {
- 	.destroy = qxl_enc_destroy,
- };
- 
-+static int qxl_mode_create_hotplug_mode_update_property(struct qxl_device *qdev)
-+{
-+	if (qdev->hotplug_mode_update_property)
-+		return 0;
-+
-+	qdev->hotplug_mode_update_property =
-+		drm_property_create_range(qdev->ddev, DRM_MODE_PROP_IMMUTABLE,
-+					  "hotplug_mode_update", 0, 1);
-+
-+	return 0;
-+}
-+
- static int qdev_output_init(struct drm_device *dev, int num_output)
- {
-+	struct qxl_device *qdev = dev->dev_private;
- 	struct qxl_output *qxl_output;
- 	struct drm_connector *connector;
- 	struct drm_encoder *encoder;
-@@ -863,6 +884,8 @@ static int qdev_output_init(struct drm_device *dev, int num_output)
- 	drm_encoder_helper_add(encoder, &qxl_enc_helper_funcs);
- 	drm_connector_helper_add(connector, &qxl_connector_helper_funcs);
- 
-+	drm_object_attach_property(&connector->base,
-+				   qdev->hotplug_mode_update_property, 0);
- 	drm_sysfs_connector_add(connector);
- 	return 0;
- }
-@@ -975,6 +998,9 @@ int qxl_modeset_init(struct qxl_device *qdev)
- 	qdev->ddev->mode_config.max_height = 8192;
- 
- 	qdev->ddev->mode_config.fb_base = qdev->vram_base;
-+
-+	qxl_mode_create_hotplug_mode_update_property(qdev);
-+
- 	for (i = 0 ; i < qxl_num_crtc; ++i) {
- 		qdev_crtc_init(qdev->ddev, i);
- 		qdev_output_init(qdev->ddev, i);
-diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h
-index 7e96f4f..18c599d 100644
---- a/drivers/gpu/drm/qxl/qxl_drv.h
-+++ b/drivers/gpu/drm/qxl/qxl_drv.h
-@@ -323,6 +323,8 @@ struct qxl_device {
- 	struct work_struct gc_work;
- 
- 	struct work_struct fb_work;
-+
-+	struct drm_property *hotplug_mode_update_property;
- };
- 
- /* forward declaration for QXL_INFO_IO */
-diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c
-index 88722f2..f437b30 100644
---- a/drivers/gpu/drm/qxl/qxl_fb.c
-+++ b/drivers/gpu/drm/qxl/qxl_fb.c
-@@ -108,7 +108,7 @@ static void qxl_fb_dirty_flush(struct fb_info *info)
- 	u32 x1, x2, y1, y2;
- 
- 	/* TODO: hard coding 32 bpp */
--	int stride = qfbdev->qfb.base.pitches[0] * 4;
-+	int stride = qfbdev->qfb.base.pitches[0];
- 
- 	x1 = qfbdev->dirty.x1;
- 	x2 = qfbdev->dirty.x2;
-diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c
-index 9e8da9e..e0ddd5b 100644
---- a/drivers/gpu/drm/qxl/qxl_kms.c
-+++ b/drivers/gpu/drm/qxl/qxl_kms.c
-@@ -120,7 +120,7 @@ int qxl_device_init(struct qxl_device *qdev,
- 		    struct pci_dev *pdev,
- 		    unsigned long flags)
- {
--	int r;
-+	int r, sb;
- 
- 	qdev->dev = &pdev->dev;
- 	qdev->ddev = ddev;
-@@ -136,21 +136,39 @@ int qxl_device_init(struct qxl_device *qdev,
- 	qdev->rom_base = pci_resource_start(pdev, 2);
- 	qdev->rom_size = pci_resource_len(pdev, 2);
- 	qdev->vram_base = pci_resource_start(pdev, 0);
--	qdev->surfaceram_base = pci_resource_start(pdev, 1);
--	qdev->surfaceram_size = pci_resource_len(pdev, 1);
- 	qdev->io_base = pci_resource_start(pdev, 3);
- 
- 	qdev->vram_mapping = io_mapping_create_wc(qdev->vram_base, pci_resource_len(pdev, 0));
--	qdev->surface_mapping = io_mapping_create_wc(qdev->surfaceram_base, qdev->surfaceram_size);
--	DRM_DEBUG_KMS("qxl: vram %llx-%llx(%dM %dk), surface %llx-%llx(%dM %dk)\n",
-+
-+	if (pci_resource_len(pdev, 4) > 0) {
-+		/* 64bit surface bar present */
-+		sb = 4;
-+		qdev->surfaceram_base = pci_resource_start(pdev, sb);
-+		qdev->surfaceram_size = pci_resource_len(pdev, sb);
-+		qdev->surface_mapping =
-+			io_mapping_create_wc(qdev->surfaceram_base,
-+					     qdev->surfaceram_size);
-+	}
-+	if (qdev->surface_mapping == NULL) {
-+		/* 64bit surface bar not present (or mapping failed) */
-+		sb = 1;
-+		qdev->surfaceram_base = pci_resource_start(pdev, sb);
-+		qdev->surfaceram_size = pci_resource_len(pdev, sb);
-+		qdev->surface_mapping =
-+			io_mapping_create_wc(qdev->surfaceram_base,
-+					     qdev->surfaceram_size);
-+	}
-+
-+	DRM_DEBUG_KMS("qxl: vram %llx-%llx(%dM %dk), surface %llx-%llx(%dM %dk, %s)\n",
- 		 (unsigned long long)qdev->vram_base,
- 		 (unsigned long long)pci_resource_end(pdev, 0),
- 		 (int)pci_resource_len(pdev, 0) / 1024 / 1024,
- 		 (int)pci_resource_len(pdev, 0) / 1024,
- 		 (unsigned long long)qdev->surfaceram_base,
--		 (unsigned long long)pci_resource_end(pdev, 1),
-+		 (unsigned long long)pci_resource_end(pdev, sb),
- 		 (int)qdev->surfaceram_size / 1024 / 1024,
--		 (int)qdev->surfaceram_size / 1024);
-+		 (int)qdev->surfaceram_size / 1024,
-+		 (sb == 4) ? "64bit" : "32bit");
- 
- 	qdev->rom = ioremap(qdev->rom_base, qdev->rom_size);
- 	if (!qdev->rom) {
---
-cgit v0.9.0.2-2-gbebe

drm-radeon-Disable-writeback-by-default-on-ppc.patch

@@ -1,85 +0,0 @@
-From b67e0a6a7409f9c1a12e573fb7d8d80ee455b103 Mon Sep 17 00:00:00 2001
-From: Adam Jackson <ajax@redhat.com>
-Date: Mon, 17 Jun 2013 09:59:34 -0400
-Subject: [PATCH] drm/radeon: Disable writeback by default on ppc
-
-At least on an IBM Power 720, this check passes, but several piglit
-tests will reliably trigger GPU resets due to the ring buffer pointers
-not being updated.  There's probably a better way to limit this to just
-affected machines though.
-
-Signed-off-by: Adam Jackson <ajax@redhat.com>
----
- drivers/gpu/drm/radeon/r600_cp.c       | 7 +++++++
- drivers/gpu/drm/radeon/radeon_cp.c     | 7 +++++++
- drivers/gpu/drm/radeon/radeon_device.c | 4 ++--
- drivers/gpu/drm/radeon/radeon_drv.c    | 2 +-
- 4 files changed, 17 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
-index 1c51c08..ef28532 100644
---- a/drivers/gpu/drm/radeon/r600_cp.c
-+++ b/drivers/gpu/drm/radeon/r600_cp.c
-@@ -552,6 +552,13 @@ static void r600_test_writeback(drm_radeon_private_t *dev_priv)
- 		dev_priv->writeback_works = 0;
- 		DRM_INFO("writeback test failed\n");
- 	}
-+#if defined(__ppc__) || defined(__ppc64__)
-+	/* the test might succeed on ppc, but it's usually not reliable */
-+	if (radeon_no_wb == -1) {
-+		radeon_no_wb = 1;
-+		DRM_INFO("not trusting writeback test due to arch quirk\n");
-+	}
-+#endif
- 	if (radeon_no_wb == 1) {
- 		dev_priv->writeback_works = 0;
- 		DRM_INFO("writeback forced off\n");
-diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
-index efc4f64..a967b33 100644
---- a/drivers/gpu/drm/radeon/radeon_cp.c
-+++ b/drivers/gpu/drm/radeon/radeon_cp.c
-@@ -892,6 +892,13 @@ static void radeon_test_writeback(drm_radeon_private_t * dev_priv)
- 		dev_priv->writeback_works = 0;
- 		DRM_INFO("writeback test failed\n");
- 	}
-+#if defined(__ppc__) || defined(__ppc64__)
-+	/* the test might succeed on ppc, but it's usually not reliable */
-+	if (radeon_no_wb == -1) {
-+		radeon_no_wb = 1;
-+		DRM_INFO("not trusting writeback test due to arch quirk\n");
-+	}
-+#endif
- 	if (radeon_no_wb == 1) {
- 		dev_priv->writeback_works = 0;
- 		DRM_INFO("writeback forced off\n");
-diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
-index 1899738..524046e 100644
---- a/drivers/gpu/drm/radeon/radeon_device.c
-+++ b/drivers/gpu/drm/radeon/radeon_device.c
-@@ -322,8 +322,8 @@ int radeon_wb_init(struct radeon_device *rdev)
- 	/* disable event_write fences */
- 	rdev->wb.use_event = false;
- 	/* disabled via module param */
--	if (radeon_no_wb == 1) {
--		rdev->wb.enabled = false;
-+	if (radeon_no_wb != -1) {
-+		rdev->wb.enabled = !!radeon_no_wb;
- 	} else {
- 		if (rdev->flags & RADEON_IS_AGP) {
- 			/* often unreliable on AGP */
-diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
-index 094e7e5..04809d4 100644
---- a/drivers/gpu/drm/radeon/radeon_drv.c
-+++ b/drivers/gpu/drm/radeon/radeon_drv.c
-@@ -146,7 +146,7 @@ static inline void radeon_register_atpx_handler(void) {}
- static inline void radeon_unregister_atpx_handler(void) {}
- #endif
- 
--int radeon_no_wb;
-+int radeon_no_wb = -1;
- int radeon_modeset = -1;
- int radeon_dynclks = -1;
- int radeon_r4xx_atom = 0;
--- 
-1.8.2.1
-

elevator-Fix-a-race-in-elevator-switching-and-md.patch

@@ -1,162 +0,0 @@
-                                                                                                                                                                                                                                                               
-Delivered-To: jwboyer@gmail.com
-Received: by 10.76.168.104 with SMTP id zv8csp55663oab;
-        Fri, 30 Aug 2013 15:52:46 -0700 (PDT)
-X-Received: by 10.68.244.168 with SMTP id xh8mr12419215pbc.3.1377903166373;
-        Fri, 30 Aug 2013 15:52:46 -0700 (PDT)
-Return-Path: <linux-kernel-owner@vger.kernel.org>
-Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67])
-        by mx.google.com with ESMTP id qc9si280431pac.269.1969.12.31.16.00.00;
-        Fri, 30 Aug 2013 15:52:46 -0700 (PDT)
-Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
-Authentication-Results: mx.google.com;
-       spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mail=linux-kernel-owner@vger.kernel.org;
-       dkim=neutral (bad format) header.i=@hds.com
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-	id S1753535Ab3H3WrV (ORCPT <rfc822;georgezhim@gmail.com>
-	+ 99 others); Fri, 30 Aug 2013 18:47:21 -0400
-Received: from usindpps04.hds.com ([207.126.252.17]:35636 "EHLO
-	usindpps04.hds.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-	with ESMTP id S1752650Ab3H3WrU (ORCPT
-	<rfc822;linux-kernel@vger.kernel.org>);
-	Fri, 30 Aug 2013 18:47:20 -0400
-DKIM-Signature:	v=1; a=rsa-sha256; c=relaxed/simple; d=hds.com; h=subject : to : from : cc
- : date : message-id : mime-version : content-type :
- content-transfer-encoding; s=mail1;
- bh=VofHN8IMnygn2hbqnFjLmX0PPEPbvpzE377u1RxpGOY=;
- b=piW6J78W57qDXBPJJuodWw/tvf0T//JbxKX6sLPvpuaOG2nBLMHzDqUeTYwFEQqUvdmf
- ZTkiwsKi0WEku3MKcxJ7veR7wvTZcQ4fGMETFTf1c2J/1JOKpXLnft4ERuW89/FAxw25
- wQM1ulsuQ3Cncl0I/sIaqMlaMOtvuQ/C8rsHorp+75eFiL6yx1jU5wMbuti4D/NprIET
- 3r57cPZ0YCh6sLjvOgjay6mKyktMToyjHPx6X1TWCSWcwes33Popc1hpadxUdFI/0npL
- mN3Tttbe7e2RcmkXAZbwg8xj+FwSu3nIRC4G9UpFCsMz518C/AWZj4puwWE6VHZWVvVZ Rg== 
-Received: from usindmail01.hds.com (usindmail03 [207.126.252.22])
-	by usindpps04.hds.com (8.14.5/8.14.5) with ESMTP id r7UMlBjr025492;
-	Fri, 30 Aug 2013 18:47:11 -0400
-Received: from hds.com (usindnetf5d-vlan47float.corp.hds.com [10.74.73.11])
-	by usindmail01.hds.com (8.14.1/8.14.1) with ESMTP id r7UMl8SG058466;
-	Fri, 30 Aug 2013 18:47:10 -0400 (EDT)
-Subject: [PATCH v2 1/2] elevator: Fix a race in elevator switching and md
- device initialization
-To:	linux-kernel@vger.kernel.org
-From:	Tomoki Sekiyama <tomoki.sekiyama@hds.com>
-Cc:	axboe@kernel.dk, tj@kernel.org, seiji.aguchi@hds.com,
-	vgoyal@redhat.com, majianpeng@gmail.com
-Date:	Fri, 30 Aug 2013 18:47:07 -0400
-Message-ID: <20130830224707.21812.63516.stgit@hds.com>
-User-Agent: StGit/0.16
-MIME-Version: 1.0
-Content-Type: text/plain; charset="utf-8"
-Content-Transfer-Encoding: 7bit
-X-Proofpoint-SPF-Result: pass
-X-Proofpoint-SPF-Record: v=spf1 mx ip4:207.126.244.0/26 ip4:207.126.252.0/25 include:mktomail.com
- include:cloud.hds.com ~all
-X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.10.8794,1.0.431,0.0.0000
- definitions=2013-08-30_09:2013-08-30,2013-08-30,1970-01-01 signatures=0
-X-Proofpoint-Spam-Details: rule=notspam policy=outbound_policy score=0 spamscore=0 suspectscore=1
- phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx
- scancount=1 engine=7.0.1-1305240000 definitions=main-1308300162
-Sender:	linux-kernel-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-kernel.vger.kernel.org>
-X-Mailing-List:	linux-kernel@vger.kernel.org
-
-The soft lockup below happens at the boot time of the system using dm
-multipath and the udev rules to switch scheduler.
-
-[  356.127001] BUG: soft lockup - CPU#3 stuck for 22s! [sh:483]
-[  356.127001] RIP: 0010:[<ffffffff81072a7d>]  [<ffffffff81072a7d>] lock_timer_base.isra.35+0x1d/0x50
-...
-[  356.127001] Call Trace:
-[  356.127001]  [<ffffffff81073810>] try_to_del_timer_sync+0x20/0x70
-[  356.127001]  [<ffffffff8118b08a>] ? kmem_cache_alloc_node_trace+0x20a/0x230
-[  356.127001]  [<ffffffff810738b2>] del_timer_sync+0x52/0x60
-[  356.127001]  [<ffffffff812ece22>] cfq_exit_queue+0x32/0xf0
-[  356.127001]  [<ffffffff812c98df>] elevator_exit+0x2f/0x50
-[  356.127001]  [<ffffffff812c9f21>] elevator_change+0xf1/0x1c0
-[  356.127001]  [<ffffffff812caa50>] elv_iosched_store+0x20/0x50
-[  356.127001]  [<ffffffff812d1d09>] queue_attr_store+0x59/0xb0
-[  356.127001]  [<ffffffff812143f6>] sysfs_write_file+0xc6/0x140
-[  356.127001]  [<ffffffff811a326d>] vfs_write+0xbd/0x1e0
-[  356.127001]  [<ffffffff811a3ca9>] SyS_write+0x49/0xa0
-[  356.127001]  [<ffffffff8164e899>] system_call_fastpath+0x16/0x1b
-
-This is caused by a race between md device initialization by multipathd and
-shell script to switch the scheduler using sysfs.
-
- - multipathd:
-   SyS_ioctl -> do_vfs_ioctl -> dm_ctl_ioctl -> ctl_ioctl -> table_load
-   -> dm_setup_md_queue -> blk_init_allocated_queue -> elevator_init
-    q->elevator = elevator_alloc(q, e); // not yet initialized
-
- - sh -c 'echo deadline > /sys/$DEVPATH/queue/scheduler':
-   elevator_switch (in the call trace above)
-    struct elevator_queue *old = q->elevator;
-    q->elevator = elevator_alloc(q, new_e);
-    elevator_exit(old);                 // lockup! (*)
-
- - multipathd: (cont.)
-    err = e->ops.elevator_init_fn(q);   // init fails; q->elevator is modified
-
-(*) When del_timer_sync() is called, lock_timer_base() will loop infinitely
-while timer->base == NULL. In this case, as timer will never initialized,
-it results in lockup.
-
-This patch introduces acquisition of q->sysfs_lock around elevator_init()
-into blk_init_allocated_queue(), to provide mutual exclusion between
-initialization of the q->scheduler and switching of the scheduler.
-
-This should fix this bugzilla:
-https://bugzilla.redhat.com/show_bug.cgi?id=902012
-
-Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
----
- block/blk-core.c |   10 +++++++++-
- block/elevator.c |    6 ++++++
- 2 files changed, 15 insertions(+), 1 deletion(-)
-
-diff --git a/block/blk-core.c b/block/blk-core.c
-index 93a18d1..2f6275f 100644
---- a/block/blk-core.c
-+++ b/block/blk-core.c
-@@ -739,9 +739,17 @@ blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
- 
- 	q->sg_reserved_size = INT_MAX;
- 
-+	/* Protect q->elevator from elevator_change */
-+	mutex_lock(&q->sysfs_lock);
-+
- 	/* init elevator */
--	if (elevator_init(q, NULL))
-+	if (elevator_init(q, NULL)) {
-+		mutex_unlock(&q->sysfs_lock);
- 		return NULL;
-+	}
-+
-+	mutex_unlock(&q->sysfs_lock);
-+
- 	return q;
- }
- EXPORT_SYMBOL(blk_init_allocated_queue);
-diff --git a/block/elevator.c b/block/elevator.c
-index 668394d..02d4390 100644
---- a/block/elevator.c
-+++ b/block/elevator.c
-@@ -186,6 +186,12 @@ int elevator_init(struct request_queue *q, char *name)
- 	struct elevator_type *e = NULL;
- 	int err;
- 
-+	/*
-+	 * q->sysfs_lock must be held to provide mutual exclusion between
-+	 * elevator_switch() and here.
-+	 */
-+	lockdep_assert_held(&q->sysfs_lock);
-+
- 	if (unlikely(q->elevator))
- 		return 0;
- 
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
-Please read the FAQ at  http://www.tux.org/lkml/

elevator-acquire-q-sysfs_lock-in-elevator_change.patch

@@ -1,121 +0,0 @@
-                                                                                                                                                                                                                                                               
-Delivered-To: jwboyer@gmail.com
-Received: by 10.76.168.104 with SMTP id zv8csp55623oab;
-        Fri, 30 Aug 2013 15:51:42 -0700 (PDT)
-X-Received: by 10.67.30.70 with SMTP id kc6mr13149193pad.32.1377903101609;
-        Fri, 30 Aug 2013 15:51:41 -0700 (PDT)
-Return-Path: <linux-kernel-owner@vger.kernel.org>
-Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67])
-        by mx.google.com with ESMTP id gg2si304840pac.217.1969.12.31.16.00.00;
-        Fri, 30 Aug 2013 15:51:41 -0700 (PDT)
-Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
-Authentication-Results: mx.google.com;
-       spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mail=linux-kernel-owner@vger.kernel.org;
-       dkim=neutral (bad format) header.i=@hds.com
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-	id S1756106Ab3H3WrX (ORCPT <rfc822;georgezhim@gmail.com>
-	+ 99 others); Fri, 30 Aug 2013 18:47:23 -0400
-Received: from usindpps04.hds.com ([207.126.252.17]:35640 "EHLO
-	usindpps04.hds.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-	with ESMTP id S1752650Ab3H3WrW (ORCPT
-	<rfc822;linux-kernel@vger.kernel.org>);
-	Fri, 30 Aug 2013 18:47:22 -0400
-DKIM-Signature:	v=1; a=rsa-sha256; c=relaxed/simple; d=hds.com; h=subject : to : from : cc
- : date : message-id : in-reply-to : references : mime-version :
- content-type : content-transfer-encoding; s=mail1;
- bh=xbQuWVaSJrPfWG5E7bXFAbOFjf/sBaRZsPmpVgy0CYk=;
- b=NW/A8Imu32MXoBi5FLrQ0FsK66RTWMQo1bFRtgQplVEQQIAXyf1XhCaAZyTkTplc0iEx
- ovyGZHvLbmGL6w3I3pxkCFz1BPJCqoZtvQITir/WvfzyadYOK1cz+vuBUQSCmfkacvS/
- w37h1jLAjsvWXkl0GY7pxB9HJMXdeLnhhuWxtNU8m8rKZ7t3LSByMeQi5/3OTkNojDEe
- 70cKeZXCPQ/UIDJAF4cpSVXia5FwoJISjXvQIrvqkYhFelzq3OHMcC482PdpqNB475h3
- yHHJ83HFOLRulUQdOG5ZVTB9qRg0zxRx/oedeXwzturFke68noRRa4f4izQ8sCwsWOCI Dw== 
-Received: from usindmail01.hds.com (usindmail03 [207.126.252.22])
-	by usindpps04.hds.com (8.14.5/8.14.5) with ESMTP id r7UMlHIc025543;
-	Fri, 30 Aug 2013 18:47:17 -0400
-Received: from hds.com (usindnetf5d-vlan47float.corp.hds.com [10.74.73.11])
-	by usindmail01.hds.com (8.14.1/8.14.1) with ESMTP id r7UMlGiC058545;
-	Fri, 30 Aug 2013 18:47:17 -0400 (EDT)
-Subject: [PATCH v2 2/2] elevator: acquire q->sysfs_lock in elevator_change()
-To:	linux-kernel@vger.kernel.org
-From:	Tomoki Sekiyama <tomoki.sekiyama@hds.com>
-Cc:	axboe@kernel.dk, tj@kernel.org, seiji.aguchi@hds.com,
-	vgoyal@redhat.com, majianpeng@gmail.com
-Date:	Fri, 30 Aug 2013 18:47:16 -0400
-Message-ID: <20130830224716.21812.99333.stgit@hds.com>
-In-Reply-To: <20130830224707.21812.63516.stgit@hds.com>
-References: <20130830224707.21812.63516.stgit@hds.com>
-User-Agent: StGit/0.16
-MIME-Version: 1.0
-Content-Type: text/plain; charset="utf-8"
-Content-Transfer-Encoding: 7bit
-X-Proofpoint-SPF-Result: pass
-X-Proofpoint-SPF-Record: v=spf1 mx ip4:207.126.244.0/26 ip4:207.126.252.0/25 include:mktomail.com
- include:cloud.hds.com ~all
-X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.10.8794,1.0.431,0.0.0000
- definitions=2013-08-30_09:2013-08-30,2013-08-30,1970-01-01 signatures=0
-X-Proofpoint-Spam-Details: rule=notspam policy=outbound_policy score=0 spamscore=0 suspectscore=1
- phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx
- scancount=1 engine=7.0.1-1305240000 definitions=main-1308300162
-Sender:	linux-kernel-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-kernel.vger.kernel.org>
-X-Mailing-List:	linux-kernel@vger.kernel.org
-
-Add locking of q->sysfs_lock into elevator_change() (an exported function)
-to ensure it is held to protect q->elevator from elevator_init(), even if
-elevator_change() is called from non-sysfs paths.
-sysfs path (elv_iosched_store) uses __elevator_change(), non-locking
-version, as the lock is already taken by elv_iosched_store().
-
-Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
----
- block/elevator.c |   16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
-diff --git a/block/elevator.c b/block/elevator.c
-index 02d4390..6d765f7 100644
---- a/block/elevator.c
-+++ b/block/elevator.c
-@@ -965,7 +965,7 @@ fail_init:
- /*
-  * Switch this queue to the given IO scheduler.
-  */
--int elevator_change(struct request_queue *q, const char *name)
-+static int __elevator_change(struct request_queue *q, const char *name)
- {
- 	char elevator_name[ELV_NAME_MAX];
- 	struct elevator_type *e;
-@@ -987,6 +987,18 @@ int elevator_change(struct request_queue *q, const char *name)
- 
- 	return elevator_switch(q, e);
- }
-+
-+int elevator_change(struct request_queue *q, const char *name)
-+{
-+	int ret;
-+
-+	/* Protect q->elevator from elevator_init() */
-+	mutex_lock(&q->sysfs_lock);
-+	ret = __elevator_change(q, name);
-+	mutex_unlock(&q->sysfs_lock);
-+
-+	return ret;
-+}
- EXPORT_SYMBOL(elevator_change);
- 
- ssize_t elv_iosched_store(struct request_queue *q, const char *name,
-@@ -997,7 +1009,7 @@ ssize_t elv_iosched_store(struct request_queue *q, const char *name,
- 	if (!q->elevator)
- 		return count;
- 
--	ret = elevator_change(q, name);
-+	ret = __elevator_change(q, name);
- 	if (!ret)
- 		return count;
- 
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
-Please read the FAQ at  http://www.tux.org/lkml/

filter-aarch64.sh.fedora

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the aarch64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia power ssb soundwire staging tty uio uwb w1"
+
+ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
+
+drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel pl111 radeon rockchip tegra sun4i sun4i-drm-hdmi tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-aarch64.sh.rhel

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the aarch64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
+
+drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel radeon rockchip tegra sun4i tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-armv7hl.sh.fedora

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the armv7hl override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn media memstick message nfc ntb pcmcia ssb soundwire staging tty uio uwb w1"
+
+ethdrvs="3com adaptec alteon altera amd atheros broadcom cadence chelsio cisco dec dlink emulex icplus mellanox micrel myricom natsemi neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis sun tehuti via wiznet xircom"
+
+drmdrvs="amd arm armada bridge ast exynos etnaviv hisilicon i2c imx meson mgag200 msm nouveau omapdrm panel pl111 radeon rockchip sti stm sun4i sun4i-drm-hdmi tegra tilcdc tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls bq27xxx_battery_hdq mlx5_vdpa"

filter-i686.sh.fedora

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the i686 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation hid-sensor-temperature hid-sensor-humidity target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus"

filter-modules.sh.fedora

@@ -0,0 +1,170 @@
+#! /bin/bash
+#
+# Called as filter-modules.sh list-of-modules Arch
+
+# This script filters the modules into the kernel-core and kernel-modules
+# subpackages.  We list out subsystems/subdirs to prune from the installed
+# module directory.  What is left is put into the kernel-core package.  What is
+# pruned is contained in the kernel-modules package.
+#
+# This file contains the default subsys/subdirs to prune from all architectures.
+# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
+# that contains the set of override lists to be used instead.  If a module or
+# subsys should be in kernel-modules on all arches, please change the defaults
+# listed here.
+
+# Overrides is individual modules which need to remain in kernel-core due to deps.
+overrides="cec"
+
+# Set the default dirs/modules to filter out
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
+
+chardrvs="mwave pcmcia"
+
+netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
+
+ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+
+inputdrvs="gameport tablet touchscreen"
+
+scsidrvs="aacraid advansys aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf wd719x"
+
+usbdrvs="atm image misc serial wusbcore"
+
+fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs jffs2 minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+
+drmdrvs="amd ast bridge gma500 i2c i915 mgag200 nouveau panel radeon"
+
+iiodrvs="accel adc afe common dac gyro health humidity light magnetometer multiplexer orientation potentiometer potentiostat pressure temperature"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus iTCO_wdt rnbd-client rnbd-server mlx5_vdpa"
+
+# Grab the arch-specific filter list overrides
+source ./filter-$2.sh
+
+filter_dir() {
+	filelist=$1
+	dir=$2
+
+	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${dir}.  Skipping."
+	else
+		grep -e "${dir}/" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+filter_ko() {
+	filelist=$1
+	mod=$2
+
+	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${mod}.ko  Skipping."
+	else
+		grep -e "${mod}.ko" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+# Filter the drivers/ subsystems
+for subsys in ${driverdirs}
+do
+	filter_dir $1 drivers/${subsys}
+done
+
+# Filter the networking drivers
+for netdrv in ${netdrvs}
+do
+	filter_dir $1 drivers/net/${netdrv}
+done
+
+# Filter the char drivers
+for char in ${chardrvs}
+do
+	filter_dir $1 drivers/char/${input}
+done
+
+# Filter the ethernet drivers
+for eth in ${ethdrvs}
+do
+	filter_dir $1 drivers/net/ethernet/${eth}
+done
+
+# SCSI
+for scsi in ${scsidrvs}
+do
+	filter_dir $1 drivers/scsi/${scsi}
+done
+
+# Input
+for input in ${inputdrvs}
+do
+	filter_dir $1 drivers/input/${input}
+done
+
+# USB
+for usb in ${usbdrvs}
+do
+	filter_dir $1 drivers/usb/${usb}
+done
+
+# Filesystems
+for fs in ${fsdrvs}
+do
+	filter_dir $1 fs/${fs}
+done
+
+# Network protocols
+for prot in ${netprots}
+do
+	filter_dir $1 kernel/net/${prot}
+done
+
+# DRM
+for drm in ${drmdrvs}
+do
+	filter_dir $1 drivers/gpu/drm/${drm}
+done
+
+# Just kill sound.
+filter_dir $1 kernel/sound
+
+# Now go through and filter any single .ko files that might have deps on the
+# things we filtered above
+for mod in ${singlemods}
+do
+        filter_ko $1 ${mod}
+done
+
+# Now process the override list to bring those modules back into core
+for mod in ${overrides}
+do
+	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
+	if [ $? -ne 0 ]
+        then
+                echo "Couldn't save ${mod}.ko  Skipping."
+        else
+                grep -e "/${mod}.ko" k-d.list >> $filelist
+                mv k-d.list.tmp k-d.list
+        fi
+
+done
+
+# Go through our generated drivers list and remove the .ko files.  We'll
+# restore them later.
+for mod in `cat k-d.list`
+do
+	rm -rf $mod
+done

filter-modules.sh.rhel

@@ -0,0 +1,168 @@
+#! /bin/bash
+#
+# Called as filter-modules.sh list-of-modules Arch
+
+# This script filters the modules into the kernel-core and kernel-modules
+# subpackages.  We list out subsystems/subdirs to prune from the installed
+# module directory.  What is left is put into the kernel-core package.  What is
+# pruned is contained in the kernel-modules package.
+#
+# This file contains the default subsys/subdirs to prune from all architectures.
+# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
+# that contains the set of override lists to be used instead.  If a module or
+# subsys should be in kernel-modules on all arches, please change the defaults
+# listed here.
+
+# Overrides is individual modules which need to remain in kernel-core due to deps.
+overrides="cec"
+
+# Set the default dirs/modules to filter out
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+chardrvs="mwave pcmcia"
+
+netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
+
+ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+
+inputdrvs="gameport tablet touchscreen"
+
+scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic hisi_sas isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf"
+
+usbdrvs="atm image misc serial wusbcore"
+
+fsdrvs="affs befs coda cramfs ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+
+drmdrvs="amd ast gma500 i2c i915 mgag200 nouveau radeon via "
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial ism hid-asus"
+
+# Grab the arch-specific filter list overrides
+source ./filter-$2.sh
+
+filter_dir() {
+	filelist=$1
+	dir=$2
+
+	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${dir}.  Skipping."
+	else
+		grep -e "${dir}/" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+filter_ko() {
+	filelist=$1
+	mod=$2
+
+	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${mod}.ko  Skipping."
+	else
+		grep -e "${mod}.ko" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+# Filter the drivers/ subsystems
+for subsys in ${driverdirs}
+do
+	filter_dir $1 drivers/${subsys}
+done
+
+# Filter the networking drivers
+for netdrv in ${netdrvs}
+do
+	filter_dir $1 drivers/net/${netdrv}
+done
+
+# Filter the char drivers
+for char in ${chardrvs}
+do
+	filter_dir $1 drivers/char/${input}
+done
+
+# Filter the ethernet drivers
+for eth in ${ethdrvs}
+do
+	filter_dir $1 drivers/net/ethernet/${eth}
+done
+
+# SCSI
+for scsi in ${scsidrvs}
+do
+	filter_dir $1 drivers/scsi/${scsi}
+done
+
+# Input
+for input in ${inputdrvs}
+do
+	filter_dir $1 drivers/input/${input}
+done
+
+# USB
+for usb in ${usbdrvs}
+do
+	filter_dir $1 drivers/usb/${usb}
+done
+
+# Filesystems
+for fs in ${fsdrvs}
+do
+	filter_dir $1 fs/${fs}
+done
+
+# Network protocols
+for prot in ${netprots}
+do
+	filter_dir $1 kernel/net/${prot}
+done
+
+# DRM
+for drm in ${drmdrvs}
+do
+	filter_dir $1 drivers/gpu/drm/${drm}
+done
+
+# Just kill sound.
+filter_dir $1 kernel/sound
+
+# Now go through and filter any single .ko files that might have deps on the
+# things we filtered above
+for mod in ${singlemods}
+do
+        filter_ko $1 ${mod}
+done
+
+# Now process the override list to bring those modules back into core
+for mod in ${overrides}
+do
+	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
+	if [ $? -ne 0 ]
+        then
+                echo "Couldn't save ${mod}.ko  Skipping."
+        else
+                grep -e "/${mod}.ko" k-d.list >> $filelist
+                mv k-d.list.tmp k-d.list
+        fi
+
+done
+
+# Go through our generated drivers list and remove the .ko files.  We'll
+# restore them later.
+for mod in `cat k-d.list`
+do
+	rm -rf $mod
+done

filter-ppc64le.sh.fedora

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the ppc64le override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-ppc64le.sh.rhel

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the ppc64le override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-s390x.sh.fedora

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the s390x override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

filter-s390x.sh.rhel

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the s390x override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

filter-x86_64.sh.fedora

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the x86_64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

filter-x86_64.sh.rhel

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the x86_64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

fs-proc-devtree-remove_proc_entry.patch

@@ -1,12 +0,0 @@
-diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
-index 927cbd1..f060f28 100644
---- a/fs/proc/proc_devtree.c
-+++ b/fs/proc/proc_devtree.c
-@@ -233,6 +233,7 @@ void __init proc_device_tree_init(void)
- 		return;
- 	root = of_find_node_by_path("/");
- 	if (root == NULL) {
-+		remove_proc_entry("device-tree", NULL);
- 		pr_debug("/proc/device-tree: can't find root\n");
- 		return;
- 	}

generate_all_configs.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+# Adjusts the configuration options to build the variants correctly
+#
+# arg1: configuration to go in the primary variant
+# arg2: are we only generating debug configs
+
+
+PRIMARY=$1
+DEBUGBUILDSENABLED=$2
+
+if [ -z "$2" ]; then
+	exit 1
+fi
+
+if [ -z "$PRIMARY" ]; then
+	PRIMARY=rhel
+fi
+
+if [ "$PRIMARY" = "fedora" ]; then
+	SECONDARY=rhel
+else
+	SECONDARY=fedora
+fi
+
+for i in kernel-*-"$PRIMARY".config; do
+	NEW=kernel-"$VERSION"-$(echo "$i" | cut -d - -f2- | sed s/-"$PRIMARY"//)
+	#echo $NEW
+	mv "$i" "$NEW"
+done
+
+rm -f kernel-*-"$SECONDARY".config
+
+if [ "$DEBUGBUILDSENABLED" -eq 0 ]; then
+	for i in kernel-*debug*.config; do
+		base=$(echo "$i" | sed -r s/-?debug//g)
+		NEW=kernel-$(echo "$base" | cut -d - -f2-)
+		mv "$i" "$NEW"
+	done
+fi

generate_bls_conf.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+set -e
+
+# shellcheck disable=SC1091
+. /etc/os-release
+
+kernelver=$1 && shift
+rootfs=$1 && shift
+variant=$1 && shift
+
+output="${rootfs}/lib/modules/${kernelver}/bls.conf"
+date=$(date -u +%Y%m%d%H%M%S)
+
+if [ "${variant:-5}" = "debug" ]; then
+    debugname=" with debugging"
+    debugid="-debug"
+else
+    debugname=""
+    debugid=""
+fi
+
+# shellcheck will complain about bootprefix being referenced but not assigned,
+# but that is perfectly OK here.
+# shellcheck disable=SC2154
+cat > "$output" <<EOF
+title ${NAME} (${kernelver}) ${VERSION}${debugname}
+version ${kernelver}${debugid}
+linux ${bootprefix}/vmlinuz-${kernelver}
+initrd ${bootprefix}/initramfs-${kernelver}.img
+options \$kernelopts
+id ${ID}-${date}-${kernelver}${debugid}
+grub_users \$grub_users
+grub_arg --unrestricted
+grub_class kernel${variant}
+EOF

hibernate-freeze-filesystems.patch

@@ -1,287 +0,0 @@
-commit b94887bbc0621e1e8402e7f0ec4bc3adf46c9a6e
-Author: Rafael J. Wysocki <rjw@sisk.pl>
-Date:   Fri Feb 17 12:42:08 2012 -0500
-
-    Freeze all filesystems during system suspend and (kernel-driven)
-    hibernation by calling freeze_supers() for all superblocks and thaw
-    them during the subsequent resume with the help of thaw_supers().
-    
-    This makes filesystems stay in a consistent state in case something
-    goes wrong between system suspend (or hibernation) and the subsequent
-    resume (e.g. journal replays won't be necessary in those cases).  In
-    particular, this should help to solve a long-standing issue that, in
-    some cases, during resume from hibernation the boot loader causes the
-    journal to be replied for the filesystem containing the kernel image
-    and/or initrd causing it to become inconsistent with the information
-    stored in the hibernation image.
-    
-    The user-space-driven hibernation (s2disk) is not covered by this
-    change, because the freezing of filesystems prevents s2disk from
-    accessing device special files it needs to do its job.
-    
-    This change is based on earlier work by Nigel Cunningham.
-    
-    Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-    
-    Rebased to 3.3-rc3 by Josh Boyer <jwboyer@redhat.com>
-
-diff --git a/fs/super.c b/fs/super.c
-index 6015c02..c8057fa 100644
---- a/fs/super.c
-+++ b/fs/super.c
-@@ -594,6 +594,79 @@ void iterate_supers_type(struct file_system_type *type,
- EXPORT_SYMBOL(iterate_supers_type);
- 
- /**
-+ *	thaw_supers - call thaw_super() for all superblocks
-+ */
-+void thaw_supers(void)
-+{
-+	struct super_block *sb, *p = NULL;
-+
-+	spin_lock(&sb_lock);
-+	list_for_each_entry(sb, &super_blocks, s_list) {
-+		if (hlist_unhashed(&sb->s_instances))
-+			continue;
-+		sb->s_count++;
-+		spin_unlock(&sb_lock);
-+
-+		if (sb->s_flags & MS_FROZEN) {
-+			thaw_super(sb);
-+			sb->s_flags &= ~MS_FROZEN;
-+		}
-+
-+		spin_lock(&sb_lock);
-+		if (p)
-+			__put_super(p);
-+		p = sb;
-+	}
-+	if (p)
-+		__put_super(p);
-+	spin_unlock(&sb_lock);
-+}
-+
-+/**
-+ *	freeze_supers - call freeze_super() for all superblocks
-+ */
-+int freeze_supers(void)
-+{
-+	struct super_block *sb, *p = NULL;
-+	int error = 0;
-+
-+	spin_lock(&sb_lock);
-+	/*
-+	 * Freeze in reverse order so filesystems depending on others are
-+	 * frozen in the right order (eg. loopback on ext3).
-+	 */
-+	list_for_each_entry_reverse(sb, &super_blocks, s_list) {
-+		if (hlist_unhashed(&sb->s_instances))
-+			continue;
-+		sb->s_count++;
-+		spin_unlock(&sb_lock);
-+
-+		if (sb->s_root && sb->s_frozen != SB_FREEZE_TRANS
-+		    && !(sb->s_flags & MS_RDONLY)) {
-+			error = freeze_super(sb);
-+			if (!error)
-+				sb->s_flags |= MS_FROZEN;
-+		}
-+
-+		spin_lock(&sb_lock);
-+		if (error)
-+			break;
-+		if (p)
-+			__put_super(p);
-+		p = sb;
-+	}
-+	if (p)
-+		__put_super(p);
-+	spin_unlock(&sb_lock);
-+
-+	if (error)
-+		thaw_supers();
-+
-+	return error;
-+}
-+
-+
-+/**
-  *	get_super - get the superblock of a device
-  *	@bdev: device to get the superblock for
-  *	
-diff --git a/include/linux/fs.h b/include/linux/fs.h
-index 386da09..a164f4a 100644
---- a/include/linux/fs.h
-+++ b/include/linux/fs.h
-@@ -210,6 +210,7 @@ struct inodes_stat_t {
- #define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
- #define MS_I_VERSION	(1<<23) /* Update inode I_version field */
- #define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
-+#define MS_FROZEN	(1<<25) /* Frozen filesystem */
- #define MS_NOSEC	(1<<28)
- #define MS_BORN		(1<<29)
- #define MS_ACTIVE	(1<<30)
-@@ -2501,6 +2502,8 @@ extern void drop_super(struct super_block *sb);
- extern void iterate_supers(void (*)(struct super_block *, void *), void *);
- extern void iterate_supers_type(struct file_system_type *,
- 			        void (*)(struct super_block *, void *), void *);
-+extern int freeze_supers(void);
-+extern void thaw_supers(void);
- 
- extern int dcache_dir_open(struct inode *, struct file *);
- extern int dcache_dir_close(struct inode *, struct file *);
-diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
-index 6d6d288..492fc62 100644
---- a/kernel/power/hibernate.c
-+++ b/kernel/power/hibernate.c
-@@ -626,12 +626,17 @@ int hibernate(void)
- 	if (error)
- 		goto Finish;
- 
--	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
-+	error = freeze_supers();
- 	if (error)
- 		goto Thaw;
-+
-+	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
-+	if (error)
-+		goto Thaw_fs;
-+
- 	if (freezer_test_done) {
- 		freezer_test_done = false;
--		goto Thaw;
-+		goto Thaw_fs;
- 	}
- 
- 	if (in_suspend) {
-@@ -655,6 +660,8 @@ int hibernate(void)
- 		pr_debug("PM: Image restored successfully.\n");
- 	}
- 
-+ Thaw_fs:
-+	thaw_supers();
-  Thaw:
- 	thaw_processes();
-  Finish:
-diff --git a/kernel/power/power.h b/kernel/power/power.h
-index 21724ee..40d6f64 100644
---- a/kernel/power/power.h
-+++ b/kernel/power/power.h
-@@ -1,3 +1,4 @@
-+#include <linux/fs.h>
- #include <linux/suspend.h>
- #include <linux/suspend_ioctls.h>
- #include <linux/utsname.h>
-@@ -227,45 +228,3 @@ enum {
- #define TEST_MAX	(__TEST_AFTER_LAST - 1)
- 
- extern int pm_test_level;
--
--#ifdef CONFIG_SUSPEND_FREEZER
--static inline int suspend_freeze_processes(void)
--{
--	int error;
--
--	error = freeze_processes();
--
--	/*
--	 * freeze_processes() automatically thaws every task if freezing
--	 * fails. So we need not do anything extra upon error.
--	 */
--	if (error)
--		goto Finish;
--
--	error = freeze_kernel_threads();
--
--	/*
--	 * freeze_kernel_threads() thaws only kernel threads upon freezing
--	 * failure. So we have to thaw the userspace tasks ourselves.
--	 */
--	if (error)
--		thaw_processes();
--
-- Finish:
--	return error;
--}
--
--static inline void suspend_thaw_processes(void)
--{
--	thaw_processes();
--}
--#else
--static inline int suspend_freeze_processes(void)
--{
--	return 0;
--}
--
--static inline void suspend_thaw_processes(void)
--{
--}
--#endif
-diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
-index 4fd51be..5f51fc7 100644
---- a/kernel/power/suspend.c
-+++ b/kernel/power/suspend.c
-@@ -29,6 +29,62 @@
- 
- #include "power.h"
- 
-+#ifdef CONFIG_SUSPEND_FREEZER
-+
-+static inline int suspend_freeze_processes(void)
-+{
-+	int error;
-+
-+	error = freeze_processes();
-+
-+	/*
-+	 * freeze_processes() automatically thaws every task if freezing
-+	 * fails. So we need not do anything extra upon error.
-+	 */
-+
-+	if (error)
-+		goto Finish;
-+
-+	error = freeze_supers();
-+	if (error) {
-+		thaw_processes();
-+		goto Finish;
-+	}
-+
-+	error = freeze_kernel_threads();
-+
-+	/*
-+	 * freeze_kernel_threads() thaws only kernel threads upon freezing
-+	 * failure. So we have to thaw the userspace tasks ourselves.
-+	 */
-+	if (error) {
-+		thaw_supers();
-+		thaw_processes();
-+	}
-+
-+Finish:
-+	return error;
-+}
-+
-+static inline void suspend_thaw_processes(void)
-+{
-+	thaw_supers();
-+	thaw_processes();
-+}
-+
-+#else /* !CONFIG_SUSPEND_FREEZER */
-+
-+static inline int suspend_freeze_processes(void)
-+{
-+	return 0;
-+}
-+
-+static inline void suspend_thaw_processes(void)
-+{
-+}
-+
-+#endif /* !CONFIG_SUSPEND_FREEZER */
-+
- const char *const pm_states[PM_SUSPEND_MAX] = {
- 	[PM_SUSPEND_STANDBY]	= "standby",
- 	[PM_SUSPEND_MEM]	= "mem",

input-kill-stupid-messages.patch

@@ -1,20 +0,0 @@
-diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
-index add5ffd..5eb2f03 100644
---- a/drivers/input/keyboard/atkbd.c
-+++ b/drivers/input/keyboard/atkbd.c
-@@ -430,11 +430,15 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
- 		goto out;
- 	case ATKBD_RET_ACK:
- 	case ATKBD_RET_NAK:
-+# if 0
-+		/* Quite a few key switchers and other tools trigger this
-+		 * and it confuses people who can do nothing about it */
- 		if (printk_ratelimit())
- 			dev_warn(&serio->dev,
- 				 "Spurious %s on %s. "
- 				 "Some program might be trying to access hardware directly.\n",
- 				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
-+#endif
- 		goto out;
- 	case ATKBD_RET_ERR:
- 		atkbd->err_count++;

iommu-Remove-stack-trace-from-broken-irq-remapping-warning.patch

@@ -1,47 +0,0 @@
-From 05104a4e8713b27291c7bb49c1e7e68b4e243571 Mon Sep 17 00:00:00 2001
-From: Neil Horman <nhorman@tuxdriver.com>
-Date: Fri, 27 Sep 2013 16:53:35 +0000
-Subject: iommu: Remove stack trace from broken irq remapping warning
-
-The warning for the irq remapping broken check in intel_irq_remapping.c is
-pretty pointless.  We need the warning, but we know where its comming from, the
-stack trace will always be the same, and it needlessly triggers things like
-Abrt.  This changes the warning to just print a text warning about BIOS being
-broken, without the stack trace, then sets the appropriate taint bit.  Since we
-automatically disable irq remapping, theres no need to contiue making Abrt jump
-at this problem
-
-Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
-CC: Joerg Roedel <joro@8bytes.org>
-CC: Bjorn Helgaas <bhelgaas@google.com>
-CC: Andy Lutomirski <luto@amacapital.net>
-CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-CC: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
-Signed-off-by: Joerg Roedel <joro@8bytes.org>
----
-diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
-index f71673d..b97d70b 100644
---- a/drivers/iommu/intel_irq_remapping.c
-+++ b/drivers/iommu/intel_irq_remapping.c
-@@ -525,12 +525,13 @@ static int __init intel_irq_remapping_supported(void)
- 	if (disable_irq_remap)
- 		return 0;
- 	if (irq_remap_broken) {
--		WARN_TAINT(1, TAINT_FIRMWARE_WORKAROUND,
--			   "This system BIOS has enabled interrupt remapping\n"
--			   "on a chipset that contains an erratum making that\n"
--			   "feature unstable.  To maintain system stability\n"
--			   "interrupt remapping is being disabled.  Please\n"
--			   "contact your BIOS vendor for an update\n");
-+		printk(KERN_WARNING
-+			"This system BIOS has enabled interrupt remapping\n"
-+			"on a chipset that contains an erratum making that\n"
-+			"feature unstable.  To maintain system stability\n"
-+			"interrupt remapping is being disabled.  Please\n"
-+			"contact your BIOS vendor for an update\n");
-+		add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
- 		disable_irq_remap = 1;
- 		return 0;
- 	}
---
-cgit v0.9.2