Fix noisy iwlwifi warning (rhbz 1205083)

Part deux: Fix it harder

.gitignore

@@ -1,2 +1,7 @@
+clog
 *.xz
 *.bz2
+*.rpm
+*.orig
+kernel-[234].*/
+perf-man-*.tar.gz

0001-iwlwifi-mvm-remove-WARN_ON-for-invalid-BA-notificati.patch

@@ -0,0 +1,34 @@
+From 1f16ea294d2ef63013740f4c8539e430b6c12dff Mon Sep 17 00:00:00 2001
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Fri, 6 Mar 2015 09:17:37 +0100
+Subject: [PATCH] iwlwifi: mvm: remove WARN_ON for invalid BA notification
+
+The firmware frequently manages to trigger this, and there's
+no known driver workaround, so stop warning.
+
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
+---
+ drivers/net/wireless/iwlwifi/mvm/tx.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
+index 07304e1..96a0540 100644
+--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
++++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
+@@ -949,8 +949,10 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
+ 	mvmsta = iwl_mvm_sta_from_mac80211(sta);
+ 	tid_data = &mvmsta->tid_data[tid];
+ 
+-	if (WARN_ONCE(tid_data->txq_id != scd_flow, "Q %d, tid %d, flow %d",
+-		      tid_data->txq_id, tid, scd_flow)) {
++	if (tid_data->txq_id != scd_flow) {
++		IWL_ERR(mvm,
++			"invalid BA notification: Q %d, tid %d, flow %d\n",
++			tid_data->txq_id, tid, scd_flow);
+ 		rcu_read_unlock();
+ 		return 0;
+ 	}
+-- 
+2.1.0
+

0001-lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch

@@ -0,0 +1,38 @@
+Bugzilla: N/A
+Upstream-status: Nak'd, supposedly replacement coming to auto-select
+
+From 0f3f5c5b4ca2eb1f41947c50bedb9b17aa1a1f80 Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Mon, 11 Nov 2013 08:39:16 -0500
+Subject: [PATCH] lib/cpumask: Make CPUMASK_OFFSTACK usable without debug
+ dependency
+
+When CPUMASK_OFFSTACK was added in 2008, it was dependent upon
+DEBUG_PER_CPU_MAPS being enabled, or an architecture could select it.
+The debug dependency adds additional overhead that isn't required for
+operation of the feature, and we need CPUMASK_OFFSTACK to increase the
+NR_CPUS value beyond 512 on x86.  We drop the current dependency and make
+sure SMP is set.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ lib/Kconfig | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/lib/Kconfig b/lib/Kconfig
+index b3c8be0..50b47cd 100644
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -342,7 +342,8 @@ config CHECK_SIGNATURE
+ 	bool
+ 
+ config CPUMASK_OFFSTACK
+-	bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS
++	bool "Force CPU masks off stack"
++	depends on SMP
+ 	help
+ 	  Use dynamic allocation for cpumask_var_t, instead of putting
+ 	  them on the stack.  This is a bit more expensive, but avoids
+-- 
+1.8.3.1
+

ACPI-Limit-access-to-custom_method.patch

@@ -0,0 +1,30 @@
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Mar 2012 08:39:37 -0500
+Subject: [PATCH] ACPI: Limit access to custom_method
+
+custom_method effectively allows arbitrary access to system memory, making
+it possible for an attacker to circumvent restrictions on module loading.
+Disable it if any such restrictions have been enabled.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/acpi/custom_method.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/acpi/custom_method.c b/drivers/acpi/custom_method.c
+index c68e72414a67..4277938af700 100644
+--- a/drivers/acpi/custom_method.c
++++ b/drivers/acpi/custom_method.c
+@@ -29,6 +29,9 @@ static ssize_t cm_write(struct file *file, const char __user * user_buf,
+ 	struct acpi_table_header table;
+ 	acpi_status status;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (!(*ppos)) {
+ 		/* parse the table header to get the table length */
+ 		if (count <= sizeof(struct acpi_table_header))
+-- 
+2.1.0
+

ARM-tegra-usb-no-reset.patch

@@ -0,0 +1,31 @@
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 3 May 2012 20:27:11 +0100
+Subject: [PATCH] ARM: tegra: usb no reset
+
+Patch for disconnect issues with storage attached to a
+ tegra-ehci controller
+---
+ drivers/usb/core/hub.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index b4bfa3ac4b12..1753af78b2b2 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -5021,6 +5021,13 @@ static void hub_event(struct work_struct *work)
+ 			(u16) hub->change_bits[0],
+ 			(u16) hub->event_bits[0]);
+ 
++	/* Don't disconnect USB-SATA on TrimSlice */
++	if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
++		if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
++				(hub->event_bits[0] == 0x2))
++			hub->event_bits[0] = 0;
++	}
++
+ 	/* Lock the device, then check to see if we were
+ 	 * disconnected while waiting for the lock to succeed. */
+ 	usb_lock_device(hdev);
+-- 
+2.1.0
+

Add-EFI-signature-data-types.patch

@@ -0,0 +1,56 @@
+From: Dave Howells <dhowells@redhat.com>
+Date: Tue, 23 Oct 2012 09:30:54 -0400
+Subject: [PATCH] Add EFI signature data types
+
+Add the data types that are used for containing hashes, keys and certificates
+for cryptographic verification.
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard for now
+
+Signed-off-by: David Howells <dhowells@redhat.com>
+---
+ include/linux/efi.h | 20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index 16ec1c00919d..b7cb7dc5ebb4 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -589,6 +589,12 @@ void efi_native_runtime_setup(void);
+ #define DEVICE_TREE_GUID \
+     EFI_GUID(  0xb1b621d5, 0xf19c, 0x41a5, 0x83, 0x0b, 0xd9, 0x15, 0x2c, 0x69, 0xaa, 0xe0 )
+ 
++#define EFI_CERT_SHA256_GUID \
++    EFI_GUID(  0xc1c41626, 0x504c, 0x4092, 0xac, 0xa9, 0x41, 0xf9, 0x36, 0x93, 0x43, 0x28 )
++
++#define EFI_CERT_X509_GUID \
++    EFI_GUID(  0xa5c059a1, 0x94e4, 0x4aa7, 0x87, 0xb5, 0xab, 0x15, 0x5c, 0x2b, 0xf0, 0x72 )
++
+ typedef struct {
+ 	efi_guid_t guid;
+ 	u64 table;
+@@ -804,6 +810,20 @@ typedef struct _efi_file_io_interface {
+ 
+ #define EFI_INVALID_TABLE_ADDR		(~0UL)
+ 
++typedef struct  {
++	efi_guid_t signature_owner;
++	u8 signature_data[];
++} efi_signature_data_t;
++
++typedef struct {
++	efi_guid_t signature_type;
++	u32 signature_list_size;
++	u32 signature_header_size;
++	u32 signature_size;
++	u8 signature_header[];
++	/* efi_signature_data_t signatures[][] */
++} efi_signature_list_t;
++
+ /*
+  * All runtime access to EFI goes through this structure:
+  */
+-- 
+2.1.0
+

Add-an-EFI-signature-blob-parser-and-key-loader.patch

@@ -0,0 +1,178 @@
+From: Dave Howells <dhowells@redhat.com>
+Date: Tue, 23 Oct 2012 09:36:28 -0400
+Subject: [PATCH] Add an EFI signature blob parser and key loader.
+
+X.509 certificates are loaded into the specified keyring as asymmetric type
+keys.
+
+Signed-off-by: David Howells <dhowells@redhat.com>
+---
+ crypto/asymmetric_keys/Kconfig      |   8 +++
+ crypto/asymmetric_keys/Makefile     |   1 +
+ crypto/asymmetric_keys/efi_parser.c | 109 ++++++++++++++++++++++++++++++++++++
+ include/linux/efi.h                 |   4 ++
+ 4 files changed, 122 insertions(+)
+ create mode 100644 crypto/asymmetric_keys/efi_parser.c
+
+diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
+index 4870f28403f5..4a1b50d73b80 100644
+--- a/crypto/asymmetric_keys/Kconfig
++++ b/crypto/asymmetric_keys/Kconfig
+@@ -67,4 +67,12 @@ config SIGNED_PE_FILE_VERIFICATION
+ 	  This option provides support for verifying the signature(s) on a
+ 	  signed PE binary.
+ 
++config EFI_SIGNATURE_LIST_PARSER
++	bool "EFI signature list parser"
++	depends on EFI
++	select X509_CERTIFICATE_PARSER
++	help
++	  This option provides support for parsing EFI signature lists for
++	  X.509 certificates and turning them into keys.
++
+ endif # ASYMMETRIC_KEY_TYPE
+diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
+index e47fcd9ac5e8..6512f6596785 100644
+--- a/crypto/asymmetric_keys/Makefile
++++ b/crypto/asymmetric_keys/Makefile
+@@ -8,6 +8,7 @@ asymmetric_keys-y := asymmetric_type.o signature.o
+ 
+ obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
+ obj-$(CONFIG_PUBLIC_KEY_ALGO_RSA) += rsa.o
++obj-$(CONFIG_EFI_SIGNATURE_LIST_PARSER) += efi_parser.o
+ 
+ #
+ # X.509 Certificate handling
+diff --git a/crypto/asymmetric_keys/efi_parser.c b/crypto/asymmetric_keys/efi_parser.c
+new file mode 100644
+index 000000000000..424896a0b169
+--- /dev/null
++++ b/crypto/asymmetric_keys/efi_parser.c
+@@ -0,0 +1,109 @@
++/* EFI signature/key/certificate list parser
++ *
++ * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
++ * Written by David Howells (dhowells@redhat.com)
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public Licence
++ * as published by the Free Software Foundation; either version
++ * 2 of the Licence, or (at your option) any later version.
++ */
++
++#define pr_fmt(fmt) "EFI: "fmt
++#include <linux/module.h>
++#include <linux/printk.h>
++#include <linux/err.h>
++#include <linux/efi.h>
++#include <keys/asymmetric-type.h>
++
++static __initdata efi_guid_t efi_cert_x509_guid = EFI_CERT_X509_GUID;
++
++/**
++ * parse_efi_signature_list - Parse an EFI signature list for certificates
++ * @data: The data blob to parse
++ * @size: The size of the data blob
++ * @keyring: The keyring to add extracted keys to
++ */
++int __init parse_efi_signature_list(const void *data, size_t size, struct key *keyring)
++{
++	unsigned offs = 0;
++	size_t lsize, esize, hsize, elsize;
++
++	pr_devel("-->%s(,%zu)\n", __func__, size);
++
++	while (size > 0) {
++		efi_signature_list_t list;
++		const efi_signature_data_t *elem;
++		key_ref_t key;
++
++		if (size < sizeof(list))
++			return -EBADMSG;
++
++		memcpy(&list, data, sizeof(list));
++		pr_devel("LIST[%04x] guid=%pUl ls=%x hs=%x ss=%x\n",
++			 offs,
++			 list.signature_type.b, list.signature_list_size,
++			 list.signature_header_size, list.signature_size);
++
++		lsize = list.signature_list_size;
++		hsize = list.signature_header_size;
++		esize = list.signature_size;
++		elsize = lsize - sizeof(list) - hsize;
++
++		if (lsize > size) {
++			pr_devel("<--%s() = -EBADMSG [overrun @%x]\n",
++				 __func__, offs);
++			return -EBADMSG;
++		}
++		if (lsize < sizeof(list) ||
++		    lsize - sizeof(list) < hsize ||
++		    esize < sizeof(*elem) ||
++		    elsize < esize ||
++		    elsize % esize != 0) {
++			pr_devel("- bad size combo @%x\n", offs);
++			return -EBADMSG;
++		}
++
++		if (efi_guidcmp(list.signature_type, efi_cert_x509_guid) != 0) {
++			data += lsize;
++			size -= lsize;
++			offs += lsize;
++			continue;
++		}
++
++		data += sizeof(list) + hsize;
++		size -= sizeof(list) + hsize;
++		offs += sizeof(list) + hsize;
++
++		for (; elsize > 0; elsize -= esize) {
++			elem = data;
++
++			pr_devel("ELEM[%04x]\n", offs);
++
++			key = key_create_or_update(
++				make_key_ref(keyring, 1),
++				"asymmetric",
++				NULL,
++				&elem->signature_data,
++				esize - sizeof(*elem),
++				(KEY_POS_ALL & ~KEY_POS_SETATTR) |
++				KEY_USR_VIEW,
++				KEY_ALLOC_NOT_IN_QUOTA |
++				KEY_ALLOC_TRUSTED);
++
++			if (IS_ERR(key))
++				pr_err("Problem loading in-kernel X.509 certificate (%ld)\n",
++				       PTR_ERR(key));
++			else
++				pr_notice("Loaded cert '%s' linked to '%s'\n",
++					  key_ref_to_ptr(key)->description,
++					  keyring->description);
++
++			data += esize;
++			size -= esize;
++			offs += esize;
++		}
++	}
++
++	return 0;
++}
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index b7cb7dc5ebb4..fb972b96959a 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -923,6 +923,10 @@ extern bool efi_poweroff_required(void);
+ char * __init efi_md_typeattr_format(char *buf, size_t size,
+ 				     const efi_memory_desc_t *md);
+ 
++struct key;
++extern int __init parse_efi_signature_list(const void *data, size_t size,
++					   struct key *keyring);
++
+ /**
+  * efi_range_is_wc - check the WC bit on an address range
+  * @start: starting kvirt address
+-- 
+2.1.0
+

Add-option-to-automatically-enforce-module-signature.patch

@@ -0,0 +1,185 @@
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Aug 2013 18:36:30 -0400
+Subject: [PATCH] Add option to automatically enforce module signatures when in
+ Secure Boot mode
+
+UEFI Secure Boot provides a mechanism for ensuring that the firmware will
+only load signed bootloaders and kernels. Certain use cases may also
+require that all kernel modules also be signed. Add a configuration option
+that enforces this automatically when enabled.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ Documentation/x86/zero-page.txt       |  2 ++
+ arch/x86/Kconfig                      | 10 ++++++++++
+ arch/x86/boot/compressed/eboot.c      | 36 +++++++++++++++++++++++++++++++++++
+ arch/x86/include/uapi/asm/bootparam.h |  3 ++-
+ arch/x86/kernel/setup.c               |  6 ++++++
+ include/linux/module.h                |  6 ++++++
+ kernel/module.c                       |  7 +++++++
+ 7 files changed, 69 insertions(+), 1 deletion(-)
+
+diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
+index 199f453cb4de..ec38acf00b40 100644
+--- a/Documentation/x86/zero-page.txt
++++ b/Documentation/x86/zero-page.txt
+@@ -30,6 +30,8 @@ Offset	Proto	Name		Meaning
+ 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
+ 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
+ 				(below)
++1EB/001	ALL     kbd_status      Numlock is enabled
++1EC/001	ALL     secure_boot	Secure boot is enabled in the firmware
+ 1EF/001	ALL	sentinel	Used to detect broken bootloaders
+ 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
+ 2D0/A00	ALL	e820_map	E820 memory map table
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 0dc9d0144a27..58273956750d 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -1660,6 +1660,16 @@ config EFI_MIXED
+ 
+ 	   If unsure, say N.
+ 
++config EFI_SECURE_BOOT_SIG_ENFORCE
++        def_bool n
++	prompt "Force module signing when UEFI Secure Boot is enabled"
++	---help---
++	  UEFI Secure Boot provides a mechanism for ensuring that the
++	  firmware will only load signed bootloaders and kernels. Certain
++	  use cases may also require that all kernel modules also be signed.
++	  Say Y here to automatically enable module signature enforcement
++	  when a system boots with UEFI Secure Boot enabled.
++
+ config SECCOMP
+ 	def_bool y
+ 	prompt "Enable seccomp to safely compute untrusted bytecode"
+diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
+index 92b9a5f2aed6..2192da755e34 100644
+--- a/arch/x86/boot/compressed/eboot.c
++++ b/arch/x86/boot/compressed/eboot.c
+@@ -12,6 +12,7 @@
+ #include <asm/efi.h>
+ #include <asm/setup.h>
+ #include <asm/desc.h>
++#include <asm/bootparam_utils.h>
+ 
+ #undef memcpy			/* Use memcpy from misc.c */
+ 
+@@ -828,6 +829,37 @@ out:
+ 	return status;
+ }
+ 
++static int get_secure_boot(void)
++{
++	u8 sb, setup;
++	unsigned long datasize = sizeof(sb);
++	efi_guid_t var_guid = EFI_GLOBAL_VARIABLE_GUID;
++	efi_status_t status;
++
++	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
++				L"SecureBoot", &var_guid, NULL, &datasize, &sb);
++
++	if (status != EFI_SUCCESS)
++		return 0;
++
++	if (sb == 0)
++		return 0;
++
++
++	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
++				L"SetupMode", &var_guid, NULL, &datasize,
++				&setup);
++
++	if (status != EFI_SUCCESS)
++		return 0;
++
++	if (setup == 1)
++		return 0;
++
++	return 1;
++}
++
++
+ /*
+  * See if we have Graphics Output Protocol
+  */
+@@ -1407,6 +1439,10 @@ struct boot_params *efi_main(struct efi_config *c,
+ 	else
+ 		setup_boot_services32(efi_early);
+ 
++	sanitize_boot_params(boot_params);
++
++	boot_params->secure_boot = get_secure_boot();
++
+ 	setup_graphics(boot_params);
+ 
+ 	setup_efi_pci(boot_params);
+diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
+index 225b0988043a..90dbfb73e11f 100644
+--- a/arch/x86/include/uapi/asm/bootparam.h
++++ b/arch/x86/include/uapi/asm/bootparam.h
+@@ -133,7 +133,8 @@ struct boot_params {
+ 	__u8  eddbuf_entries;				/* 0x1e9 */
+ 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
+ 	__u8  kbd_status;				/* 0x1eb */
+-	__u8  _pad5[3];					/* 0x1ec */
++	__u8  secure_boot;				/* 0x1ec */
++	__u8  _pad5[2];					/* 0x1ed */
+ 	/*
+ 	 * The sentinel is set to a nonzero value (0xff) in header.S.
+ 	 *
+diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
+index ab4734e5411d..5d52d67d5097 100644
+--- a/arch/x86/kernel/setup.c
++++ b/arch/x86/kernel/setup.c
+@@ -1152,6 +1152,12 @@ void __init setup_arch(char **cmdline_p)
+ 
+ 	io_delay_init();
+ 
++#ifdef CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE
++	if (boot_params.secure_boot) {
++		enforce_signed_modules();
++	}
++#endif
++
+ 	/*
+ 	 * Parse the ACPI tables for possible boot-time SMP configuration.
+ 	 */
+diff --git a/include/linux/module.h b/include/linux/module.h
+index d4b96d6c926a..c47f75720dbd 100644
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -188,6 +188,12 @@ const struct exception_table_entry *search_exception_tables(unsigned long add);
+ 
+ struct notifier_block;
+ 
++#ifdef CONFIG_MODULE_SIG
++extern void enforce_signed_modules(void);
++#else
++static inline void enforce_signed_modules(void) {};
++#endif
++
+ #ifdef CONFIG_MODULES
+ 
+ extern int modules_disabled; /* for sysctl */
+diff --git a/kernel/module.c b/kernel/module.c
+index 98c3d7955a51..6244f24abe27 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -3896,6 +3896,13 @@ void module_layout(struct module *mod,
+ EXPORT_SYMBOL(module_layout);
+ #endif
+ 
++#ifdef CONFIG_MODULE_SIG
++void enforce_signed_modules(void)
++{
++	sig_enforce = true;
++}
++#endif
++
+ bool secure_modules(void)
+ {
+ #ifdef CONFIG_MODULE_SIG
+-- 
+2.1.0
+

Add-secure_modules-call.patch

@@ -0,0 +1,63 @@
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Aug 2013 17:58:15 -0400
+Subject: [PATCH] Add secure_modules() call
+
+Provide a single call to allow kernel code to determine whether the system
+has been configured to either disable module loading entirely or to load
+only modules signed with a trusted key.
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard.  Replaced by securelevels, but that was nak'd
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ include/linux/module.h |  7 +++++++
+ kernel/module.c        | 10 ++++++++++
+ 2 files changed, 17 insertions(+)
+
+diff --git a/include/linux/module.h b/include/linux/module.h
+index b653d7c0a05a..d4b96d6c926a 100644
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -502,6 +502,8 @@ int unregister_module_notifier(struct notifier_block *nb);
+ 
+ extern void print_modules(void);
+ 
++extern bool secure_modules(void);
++
+ #else /* !CONFIG_MODULES... */
+ 
+ /* Given an address, look for it in the exception tables. */
+@@ -612,6 +614,11 @@ static inline int unregister_module_notifier(struct notifier_block *nb)
+ static inline void print_modules(void)
+ {
+ }
++
++static inline bool secure_modules(void)
++{
++	return false;
++}
+ #endif /* CONFIG_MODULES */
+ 
+ #ifdef CONFIG_SYSFS
+diff --git a/kernel/module.c b/kernel/module.c
+index d856e96a3cce..98c3d7955a51 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -3895,3 +3895,13 @@ void module_layout(struct module *mod,
+ }
+ EXPORT_SYMBOL(module_layout);
+ #endif
++
++bool secure_modules(void)
++{
++#ifdef CONFIG_MODULE_SIG
++	return (sig_enforce || modules_disabled);
++#else
++	return modules_disabled;
++#endif
++}
++EXPORT_SYMBOL(secure_modules);
+-- 
+2.1.0
+

Add-sysrq-option-to-disable-secure-boot-mode.patch

@@ -0,0 +1,248 @@
+From: Kyle McMartin <kyle@redhat.com>
+Date: Fri, 30 Aug 2013 09:28:51 -0400
+Subject: [PATCH] Add sysrq option to disable secure boot mode
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ arch/x86/kernel/setup.c     | 36 ++++++++++++++++++++++++++++++++++++
+ drivers/input/misc/uinput.c |  1 +
+ drivers/tty/sysrq.c         | 19 +++++++++++++------
+ include/linux/input.h       |  5 +++++
+ include/linux/sysrq.h       |  8 +++++++-
+ kernel/debug/kdb/kdb_main.c |  2 +-
+ kernel/module.c             |  4 ++--
+ 7 files changed, 65 insertions(+), 10 deletions(-)
+
+diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
+index b40d6174242f..0ee7749bad74 100644
+--- a/arch/x86/kernel/setup.c
++++ b/arch/x86/kernel/setup.c
+@@ -70,6 +70,11 @@
+ #include <linux/tboot.h>
+ #include <linux/jiffies.h>
+ 
++#include <linux/fips.h>
++#include <linux/cred.h>
++#include <linux/sysrq.h>
++#include <linux/init_task.h>
++
+ #include <video/edid.h>
+ 
+ #include <asm/mtrr.h>
+@@ -1277,6 +1282,37 @@ void __init i386_reserve_resources(void)
+ 
+ #endif /* CONFIG_X86_32 */
+ 
++#ifdef CONFIG_MAGIC_SYSRQ
++#ifdef CONFIG_MODULE_SIG
++extern bool sig_enforce;
++#endif
++
++static void sysrq_handle_secure_boot(int key)
++{
++	if (!efi_enabled(EFI_SECURE_BOOT))
++		return;
++
++	pr_info("Secure boot disabled\n");
++#ifdef CONFIG_MODULE_SIG
++	sig_enforce = fips_enabled;
++#endif
++}
++static struct sysrq_key_op secure_boot_sysrq_op = {
++	.handler	=	sysrq_handle_secure_boot,
++	.help_msg	=	"unSB(x)",
++	.action_msg	=	"Disabling Secure Boot restrictions",
++	.enable_mask	=	SYSRQ_DISABLE_USERSPACE,
++};
++static int __init secure_boot_sysrq(void)
++{
++	if (efi_enabled(EFI_SECURE_BOOT))
++		register_sysrq_key('x', &secure_boot_sysrq_op);
++	return 0;
++}
++late_initcall(secure_boot_sysrq);
++#endif /*CONFIG_MAGIC_SYSRQ*/
++
++
+ static struct notifier_block kernel_offset_notifier = {
+ 	.notifier_call = dump_kernel_offset
+ };
+diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
+index 421e29e4cd81..61c1eb97806c 100644
+--- a/drivers/input/misc/uinput.c
++++ b/drivers/input/misc/uinput.c
+@@ -366,6 +366,7 @@ static int uinput_allocate_device(struct uinput_device *udev)
+ 	if (!udev->dev)
+ 		return -ENOMEM;
+ 
++	udev->dev->flags |= INPUTDEV_FLAGS_SYNTHETIC;
+ 	udev->dev->event = uinput_dev_event;
+ 	input_set_drvdata(udev->dev, udev);
+ 
+diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
+index 42bad18c66c9..496e073b09d7 100644
+--- a/drivers/tty/sysrq.c
++++ b/drivers/tty/sysrq.c
+@@ -463,6 +463,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
+ 	&sysrq_showstate_blocked_op,	/* w */
+ 	/* x: May be registered on ppc/powerpc for xmon */
+ 	/* x: May be registered on sparc64 for global PMU dump */
++	/* x: May be registered on x86_64 for disabling secure boot */
+ 	NULL,				/* x */
+ 	/* y: May be registered on sparc64 for global register dump */
+ 	NULL,				/* y */
+@@ -506,7 +507,7 @@ static void __sysrq_put_key_op(int key, struct sysrq_key_op *op_p)
+                 sysrq_key_table[i] = op_p;
+ }
+ 
+-void __handle_sysrq(int key, bool check_mask)
++void __handle_sysrq(int key, int from)
+ {
+ 	struct sysrq_key_op *op_p;
+ 	int orig_log_level;
+@@ -526,11 +527,15 @@ void __handle_sysrq(int key, bool check_mask)
+ 
+         op_p = __sysrq_get_key_op(key);
+         if (op_p) {
++		/* Ban synthetic events from some sysrq functionality */
++		if ((from == SYSRQ_FROM_PROC || from == SYSRQ_FROM_SYNTHETIC) &&
++		    op_p->enable_mask & SYSRQ_DISABLE_USERSPACE)
++			printk("This sysrq operation is disabled from userspace.\n");
+ 		/*
+ 		 * Should we check for enabled operations (/proc/sysrq-trigger
+ 		 * should not) and is the invoked operation enabled?
+ 		 */
+-		if (!check_mask || sysrq_on_mask(op_p->enable_mask)) {
++		if (from == SYSRQ_FROM_KERNEL || sysrq_on_mask(op_p->enable_mask)) {
+ 			printk("%s\n", op_p->action_msg);
+ 			console_loglevel = orig_log_level;
+ 			op_p->handler(key);
+@@ -562,7 +567,7 @@ void __handle_sysrq(int key, bool check_mask)
+ void handle_sysrq(int key)
+ {
+ 	if (sysrq_on())
+-		__handle_sysrq(key, true);
++		__handle_sysrq(key, SYSRQ_FROM_KERNEL);
+ }
+ EXPORT_SYMBOL(handle_sysrq);
+ 
+@@ -642,7 +647,7 @@ static void sysrq_do_reset(unsigned long _state)
+ static void sysrq_handle_reset_request(struct sysrq_state *state)
+ {
+ 	if (state->reset_requested)
+-		__handle_sysrq(sysrq_xlate[KEY_B], false);
++		__handle_sysrq(sysrq_xlate[KEY_B], SYSRQ_FROM_KERNEL);
+ 
+ 	if (sysrq_reset_downtime_ms)
+ 		mod_timer(&state->keyreset_timer,
+@@ -793,8 +798,10 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq,
+ 
+ 	default:
+ 		if (sysrq->active && value && value != 2) {
++			int from = sysrq->handle.dev->flags & INPUTDEV_FLAGS_SYNTHETIC ?
++					SYSRQ_FROM_SYNTHETIC : 0;
+ 			sysrq->need_reinject = false;
+-			__handle_sysrq(sysrq_xlate[code], true);
++			__handle_sysrq(sysrq_xlate[code], from);
+ 		}
+ 		break;
+ 	}
+@@ -1089,7 +1096,7 @@ static ssize_t write_sysrq_trigger(struct file *file, const char __user *buf,
+ 
+ 		if (get_user(c, buf))
+ 			return -EFAULT;
+-		__handle_sysrq(c, false);
++		__handle_sysrq(c, SYSRQ_FROM_PROC);
+ 	}
+ 
+ 	return count;
+diff --git a/include/linux/input.h b/include/linux/input.h
+index 82ce323b9986..9e534f228945 100644
+--- a/include/linux/input.h
++++ b/include/linux/input.h
+@@ -42,6 +42,7 @@ struct input_value {
+  * @phys: physical path to the device in the system hierarchy
+  * @uniq: unique identification code for the device (if device has it)
+  * @id: id of the device (struct input_id)
++ * @flags: input device flags (SYNTHETIC, etc.)
+  * @propbit: bitmap of device properties and quirks
+  * @evbit: bitmap of types of events supported by the device (EV_KEY,
+  *	EV_REL, etc.)
+@@ -124,6 +125,8 @@ struct input_dev {
+ 	const char *uniq;
+ 	struct input_id id;
+ 
++	unsigned int flags;
++
+ 	unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];
+ 
+ 	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
+@@ -190,6 +193,8 @@ struct input_dev {
+ };
+ #define to_input_dev(d) container_of(d, struct input_dev, dev)
+ 
++#define	INPUTDEV_FLAGS_SYNTHETIC	0x000000001
++
+ /*
+  * Verify that we are in sync with input_device_id mod_devicetable.h #defines
+  */
+diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
+index 387fa7d05c98..4b07e30b3279 100644
+--- a/include/linux/sysrq.h
++++ b/include/linux/sysrq.h
+@@ -28,6 +28,8 @@
+ #define SYSRQ_ENABLE_BOOT	0x0080
+ #define SYSRQ_ENABLE_RTNICE	0x0100
+ 
++#define SYSRQ_DISABLE_USERSPACE	0x00010000
++
+ struct sysrq_key_op {
+ 	void (*handler)(int);
+ 	char *help_msg;
+@@ -42,8 +44,12 @@ struct sysrq_key_op {
+  * are available -- else NULL's).
+  */
+ 
++#define SYSRQ_FROM_KERNEL	0x0001
++#define SYSRQ_FROM_PROC		0x0002
++#define SYSRQ_FROM_SYNTHETIC	0x0004
++
+ void handle_sysrq(int key);
+-void __handle_sysrq(int key, bool check_mask);
++void __handle_sysrq(int key, int from);
+ int register_sysrq_key(int key, struct sysrq_key_op *op);
+ int unregister_sysrq_key(int key, struct sysrq_key_op *op);
+ struct sysrq_key_op *__sysrq_get_key_op(int key);
+diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
+index 60f6bb817f70..c0a20ee0ad96 100644
+--- a/kernel/debug/kdb/kdb_main.c
++++ b/kernel/debug/kdb/kdb_main.c
+@@ -1968,7 +1968,7 @@ static int kdb_sr(int argc, const char **argv)
+ 		return KDB_ARGCOUNT;
+ 
+ 	kdb_trap_printk++;
+-	__handle_sysrq(*argv[1], check_mask);
++	__handle_sysrq(*argv[1], check_mask & SYSRQ_FROM_KERNEL);
+ 	kdb_trap_printk--;
+ 
+ 	return 0;
+diff --git a/kernel/module.c b/kernel/module.c
+index 6244f24abe27..b77554170d76 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -107,9 +107,9 @@ struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
+ 
+ #ifdef CONFIG_MODULE_SIG
+ #ifdef CONFIG_MODULE_SIG_FORCE
+-static bool sig_enforce = true;
++bool sig_enforce = true;
+ #else
+-static bool sig_enforce = false;
++bool sig_enforce = false;
+ 
+ static int param_set_bool_enable_only(const char *val,
+ 				      const struct kernel_param *kp)
+-- 
+2.1.0
+

Bluetooth-ath3k-Add-support-Atheros-AR5B195-combo-Mi.patch

@@ -0,0 +1,71 @@
+From: Alexander Ploumistos <alex.ploumistos@gmail.com>
+Date: Fri, 13 Feb 2015 21:05:11 +0200
+Subject: [PATCH] Bluetooth: ath3k: Add support Atheros AR5B195 combo Mini PCIe
+ card
+
+Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so
+that the device can load the ath3k firmware and re-enumerate itself as an
+AR3011 device.
+
+T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
+D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
+P:  Vendor=04f2 ProdID=aff1 Rev= 0.01
+C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
+I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
+E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
+E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
+E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
+E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
+E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
+I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
+E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
+E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
+I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
+E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
+E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
+I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
+E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
+E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
+I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
+E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
+E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
+I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
+E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
+E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
+
+Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
+Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
+Cc: stable@vger.kernel.org
+---
+ drivers/bluetooth/ath3k.c | 1 +
+ drivers/bluetooth/btusb.c | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
+index de4c8499cbac..288547a3c566 100644
+--- a/drivers/bluetooth/ath3k.c
++++ b/drivers/bluetooth/ath3k.c
+@@ -65,6 +65,7 @@ static const struct usb_device_id ath3k_table[] = {
+ 	/* Atheros AR3011 with sflash firmware*/
+ 	{ USB_DEVICE(0x0489, 0xE027) },
+ 	{ USB_DEVICE(0x0489, 0xE03D) },
++	{ USB_DEVICE(0x04F2, 0xAFF1) },
+ 	{ USB_DEVICE(0x0930, 0x0215) },
+ 	{ USB_DEVICE(0x0CF3, 0x3002) },
+ 	{ USB_DEVICE(0x0CF3, 0xE019) },
+diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
+index c91ec52a8948..b0449bb18873 100644
+--- a/drivers/bluetooth/btusb.c
++++ b/drivers/bluetooth/btusb.c
+@@ -153,6 +153,7 @@ static const struct usb_device_id blacklist_table[] = {
+ 	/* Atheros 3011 with sflash firmware */
+ 	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
+ 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
++	{ USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
+ 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
+ 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ 	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
+-- 
+2.1.0
+

HID-logitech-hidpp-add-a-module-parameter-to-keep-fi.patch

@@ -0,0 +1,52 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Thu, 26 Mar 2015 12:41:57 -0400
+Subject: [PATCH] HID: logitech-hidpp: add a module parameter to keep firmware
+ gestures
+
+The Logitech T650 used to report 3 fingers swipes to the up as a press on the
+Super key. When we switched the touchpad to the raw mode, we also disable such
+firmware gesture and some users may rely on it.
+
+Unfortunately, 3 finger swipes are still not supported in most of the Linux
+environments, which means that we disabled a feature of the touchpad.
+
+Allow users to revert the raw reporting mode and keep going with the firmware
+gestures by providing a new module parameter.
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Signed-off-by: Jiri Kosina <jkosina@suse.cz>
+---
+ drivers/hid/hid-logitech-hidpp.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
+index a93cefe0e522..00304f742eca 100644
+--- a/drivers/hid/hid-logitech-hidpp.c
++++ b/drivers/hid/hid-logitech-hidpp.c
+@@ -28,6 +28,11 @@ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+ MODULE_AUTHOR("Nestor Lopez Casado <nlopezcasad@logitech.com>");
+ 
++static bool disable_raw_mode;
++module_param(disable_raw_mode, bool, 0644);
++MODULE_PARM_DESC(disable_raw_mode,
++	"Disable Raw mode reporting for touchpads and keep firmware gestures.");
++
+ #define REPORT_ID_HIDPP_SHORT			0x10
+ #define REPORT_ID_HIDPP_LONG			0x11
+ 
+@@ -1159,6 +1164,11 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
+ 
+ 	hidpp->quirks = id->driver_data;
+ 
++	if (disable_raw_mode) {
++		hidpp->quirks &= ~HIDPP_QUIRK_CLASS_WTP;
++		hidpp->quirks &= ~HIDPP_QUIRK_DELAYED_INIT;
++	}
++
+ 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
+ 		ret = wtp_allocate(hdev, id);
+ 		if (ret)
+-- 
+2.1.0
+

HID-multitouch-add-support-of-clickpads.patch

@@ -0,0 +1,50 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Fri, 6 Mar 2015 11:14:42 -0500
+Subject: [PATCH] HID: multitouch: add support of clickpads
+
+Touchpads that have only one button are called clickpads and should
+be advertised as such by the kernel.
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Tested-by: Jason Ekstrand <jason@jlekstrand.net>
+---
+ drivers/hid/hid-multitouch.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
+index f65e78b46999..ef06dc30b9b1 100644
+--- a/drivers/hid/hid-multitouch.c
++++ b/drivers/hid/hid-multitouch.c
+@@ -116,6 +116,7 @@ struct mt_device {
+ 	__u8 touches_by_report;	/* how many touches are present in one report:
+ 				* 1 means we should use a serial protocol
+ 				* > 1 means hybrid (multitouch) protocol */
++	__u8 buttons_count;	/* number of physical buttons per touchpad */
+ 	bool serial_maybe;	/* need to check for serial protocol */
+ 	bool curvalid;		/* is the current contact valid? */
+ 	unsigned mt_flags;	/* flags to pass to input-mt */
+@@ -379,6 +380,10 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ 		td->inputmode_value = MT_INPUTMODE_TOUCHPAD;
+ 	}
+ 
++	/* count the buttons on touchpads */
++	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)
++		td->buttons_count++;
++
+ 	if (usage->usage_index)
+ 		prev_usage = &field->usage[usage->usage_index - 1];
+ 
+@@ -728,6 +733,10 @@ static void mt_touch_input_configured(struct hid_device *hdev,
+ 	if (cls->quirks & MT_QUIRK_NOT_SEEN_MEANS_UP)
+ 		td->mt_flags |= INPUT_MT_DROP_UNUSED;
+ 
++	/* check for clickpads */
++	if ((td->mt_flags & INPUT_MT_POINTER) && (td->buttons_count == 1))
++		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
++
+ 	input_mt_init_slots(input, td->maxcontacts, td->mt_flags);
+ 
+ 	td->mt_flags = 0;
+-- 
+2.1.0
+

HID-rmi-check-sanity-of-the-incoming-report.patch

@@ -0,0 +1,110 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Wed, 10 Sep 2014 18:02:37 -0700
+Subject: [PATCH] HID: rmi: check sanity of the incoming report
+
+commit 5b65c2a0296644dd3dbdd590d6f00174d18c96b3 upstream.
+
+In the Dell XPS 13 9333, it appears that sometimes the bus get confused
+and corrupts the incoming data. It fills the input report with the
+sentinel value "ff". Synaptics told us that such behavior does not comes
+from the touchpad itself, so we filter out such reports here.
+
+Unfortunately, we can not simply discard the incoming data because they
+may contain useful information. Most of the time, the misbehavior is
+quite near the end of the report, so we can still use the valid part of
+it.
+
+Fixes:
+https://bugzilla.redhat.com/show_bug.cgi?id=1123584
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
+Signed-off-by: Jiri Kosina <jkosina@suse.cz>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/hid/hid-rmi.c | 44 ++++++++++++++++++++++++++++++++++++++------
+ 1 file changed, 38 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
+index 8389e8109218..3cccff73b9b9 100644
+--- a/drivers/hid/hid-rmi.c
++++ b/drivers/hid/hid-rmi.c
+@@ -320,10 +320,7 @@ static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
+ 	int offset;
+ 	int i;
+ 
+-	if (size < hdata->f11.report_size)
+-		return 0;
+-
+-	if (!(irq & hdata->f11.irq_mask))
++	if (!(irq & hdata->f11.irq_mask) || size <= 0)
+ 		return 0;
+ 
+ 	offset = (hdata->max_fingers >> 2) + 1;
+@@ -332,9 +329,19 @@ static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
+ 		int fs_bit_position = (i & 0x3) << 1;
+ 		int finger_state = (data[fs_byte_position] >> fs_bit_position) &
+ 					0x03;
++		int position = offset + 5 * i;
++
++		if (position + 5 > size) {
++			/* partial report, go on with what we received */
++			printk_once(KERN_WARNING
++				"%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n",
++				 dev_driver_string(&hdev->dev),
++				 dev_name(&hdev->dev));
++			hid_dbg(hdev, "Incomplete finger report\n");
++			break;
++		}
+ 
+-		rmi_f11_process_touch(hdata, i, finger_state,
+-				&data[offset + 5 * i]);
++		rmi_f11_process_touch(hdata, i, finger_state, &data[position]);
+ 	}
+ 	input_mt_sync_frame(hdata->input);
+ 	input_sync(hdata->input);
+@@ -352,6 +359,11 @@ static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
+ 	if (!(irq & hdata->f30.irq_mask))
+ 		return 0;
+ 
++	if (size < (int)hdata->f30.report_size) {
++		hid_warn(hdev, "Click Button pressed, but the click data is missing\n");
++		return 0;
++	}
++
+ 	for (i = 0; i < hdata->gpio_led_count; i++) {
+ 		if (test_bit(i, &hdata->button_mask)) {
+ 			value = (data[i / 8] >> (i & 0x07)) & BIT(0);
+@@ -412,9 +424,29 @@ static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
+ 	return 1;
+ }
+ 
++static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size)
++{
++	int valid_size = size;
++	/*
++	 * On the Dell XPS 13 9333, the bus sometimes get confused and fills
++	 * the report with a sentinel value "ff". Synaptics told us that such
++	 * behavior does not comes from the touchpad itself, so we filter out
++	 * such reports here.
++	 */
++
++	while ((data[valid_size - 1] == 0xff) && valid_size > 0)
++		valid_size--;
++
++	return valid_size;
++}
++
+ static int rmi_raw_event(struct hid_device *hdev,
+ 		struct hid_report *report, u8 *data, int size)
+ {
++	size = rmi_check_sanity(hdev, data, size);
++	if (size < 2)
++		return 0;
++
+ 	switch (data[0]) {
+ 	case RMI_READ_DATA_REPORT_ID:
+ 		return rmi_read_data_event(hdev, data, size);
+-- 
+1.9.3
+

Input-synaptics-re-route-tracksticks-buttons-on-the-.patch

@@ -0,0 +1,151 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Sun, 8 Mar 2015 22:35:41 -0700
+Subject: [PATCH] Input: synaptics - re-route tracksticks buttons on the Lenovo
+ 2015 series
+
+The 2015 series of the Lenovo thinkpads added back the hardware buttons on
+top of the touchpad for the trackstick.
+
+Unfortunately, they are wired to the touchpad, and not the trackstick.
+Thus, they are seen as extra buttons from the kernel point of view.
+
+This leads to a problem in user space because extra buttons on synaptics
+devices used to be used as scroll up/down buttons. So in the end, the
+experience for the user is scroll events for buttons left and right when
+using the trackstick. Yay!
+
+Fortunately, the firmware advertises such behavior in the extended
+capability $10, and so we can re-route the buttons through the pass-through
+interface.
+
+Hallelujah-expressed-by: Peter Hutterer <peter.hutterer@who-t.net>
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Acked-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+---
+ drivers/input/mouse/synaptics.c | 47 +++++++++++++++++++++++++++++++----------
+ drivers/input/mouse/synaptics.h |  5 +++++
+ 2 files changed, 41 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
+index 9d599eb79f17..ecc7811cbd46 100644
+--- a/drivers/input/mouse/synaptics.c
++++ b/drivers/input/mouse/synaptics.c
+@@ -579,18 +579,22 @@ static int synaptics_is_pt_packet(unsigned char *buf)
+ 	return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4;
+ }
+ 
+-static void synaptics_pass_pt_packet(struct serio *ptport, unsigned char *packet)
++static void synaptics_pass_pt_packet(struct psmouse *psmouse,
++				     struct serio *ptport,
++				     unsigned char *packet)
+ {
++	struct synaptics_data *priv = psmouse->private;
+ 	struct psmouse *child = serio_get_drvdata(ptport);
+ 
+ 	if (child && child->state == PSMOUSE_ACTIVATED) {
+-		serio_interrupt(ptport, packet[1], 0);
++		serio_interrupt(ptport, packet[1] | priv->pt_buttons, 0);
+ 		serio_interrupt(ptport, packet[4], 0);
+ 		serio_interrupt(ptport, packet[5], 0);
+ 		if (child->pktsize == 4)
+ 			serio_interrupt(ptport, packet[2], 0);
+-	} else
++	} else {
+ 		serio_interrupt(ptport, packet[1], 0);
++	}
+ }
+ 
+ static void synaptics_pt_activate(struct psmouse *psmouse)
+@@ -847,6 +851,7 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse,
+ 	struct input_dev *dev = psmouse->dev;
+ 	struct synaptics_data *priv = psmouse->private;
+ 	int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1;
++	char buf[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+ 	int i;
+ 
+ 	if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
+@@ -857,12 +862,30 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse,
+ 	    !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02))
+ 		return;
+ 
+-	for (i = 0; i < ext_bits; i++) {
+-		input_report_key(dev, BTN_0 + 2 * i,
+-			hw->ext_buttons & (1 << i));
+-		input_report_key(dev, BTN_1 + 2 * i,
+-			hw->ext_buttons & (1 << (i + ext_bits)));
++	if (!SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10)) {
++		for (i = 0; i < ext_bits; i++) {
++			input_report_key(dev, BTN_0 + 2 * i,
++				hw->ext_buttons & (1 << i));
++			input_report_key(dev, BTN_1 + 2 * i,
++				hw->ext_buttons & (1 << (i + ext_bits)));
++		}
++		return;
+ 	}
++
++	/*
++	 * This generation of touchpads has the trackstick buttons
++	 * physically wired to the touchpad. Re-route them through
++	 * the pass-through interface.
++	 */
++	if (!priv->pt_port)
++		return;
++
++	/* The trackstick expects at most 3 buttons */
++	priv->pt_buttons = SYN_CAP_EXT_BUTTON_STICK_L(hw->ext_buttons)      |
++			   SYN_CAP_EXT_BUTTON_STICK_R(hw->ext_buttons) << 1 |
++			   SYN_CAP_EXT_BUTTON_STICK_M(hw->ext_buttons) << 2;
++
++	synaptics_pass_pt_packet(psmouse, priv->pt_port, buf);
+ }
+ 
+ static void synaptics_report_buttons(struct psmouse *psmouse,
+@@ -1459,7 +1482,8 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse)
+ 		if (SYN_CAP_PASS_THROUGH(priv->capabilities) &&
+ 		    synaptics_is_pt_packet(psmouse->packet)) {
+ 			if (priv->pt_port)
+-				synaptics_pass_pt_packet(priv->pt_port, psmouse->packet);
++				synaptics_pass_pt_packet(psmouse, priv->pt_port,
++							 psmouse->packet);
+ 		} else
+ 			synaptics_process_packet(psmouse);
+ 
+@@ -1561,8 +1585,9 @@ static void set_input_params(struct psmouse *psmouse,
+ 		__set_bit(BTN_BACK, dev->keybit);
+ 	}
+ 
+-	for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
+-		__set_bit(BTN_0 + i, dev->keybit);
++	if (!SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10))
++		for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
++			__set_bit(BTN_0 + i, dev->keybit);
+ 
+ 	__clear_bit(EV_REL, dev->evbit);
+ 	__clear_bit(REL_X, dev->relbit);
+diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
+index 8d3761ce8f54..f39539c70219 100644
+--- a/drivers/input/mouse/synaptics.h
++++ b/drivers/input/mouse/synaptics.h
+@@ -111,6 +111,10 @@
+ #define SYN_CAP_EXT_BUTTONS_STICK(ex10)	((ex10) & 0x010000)
+ #define SYN_CAP_SECUREPAD(ex10)		((ex10) & 0x020000)
+ 
++#define SYN_CAP_EXT_BUTTON_STICK_L(eb)	(!!((eb) & 0x01))
++#define SYN_CAP_EXT_BUTTON_STICK_M(eb)	(!!((eb) & 0x02))
++#define SYN_CAP_EXT_BUTTON_STICK_R(eb)	(!!((eb) & 0x04))
++
+ /* synaptics modes query bits */
+ #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
+ #define SYN_MODE_RATE(m)		((m) & (1 << 6))
+@@ -192,6 +196,7 @@ struct synaptics_data {
+ 	bool disable_gesture;			/* disable gestures */
+ 
+ 	struct serio *pt_port;			/* Pass-through serio port */
++	unsigned char pt_buttons;		/* Pass-through buttons */
+ 
+ 	struct synaptics_mt_state mt_state;	/* Current mt finger state */
+ 	bool mt_state_lost;			/* mt_state may be incorrect */
+-- 
+2.1.0
+

Input-synaptics-remove-TOPBUTTONPAD-property-for-Len.patch

@@ -0,0 +1,44 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Sun, 8 Mar 2015 22:34:50 -0700
+Subject: [PATCH] Input: synaptics - remove TOPBUTTONPAD property for Lenovos
+ 2015
+
+The 2015 series of the Lenovo thinkpads added back the hardware buttons on
+top of the touchpad for the trackstick.
+
+Unfortunately, Lenovo used the PNPIDs that are supposed to be "5 buttons"
+touchpads, so the new laptops also have the INPUT_PROP_TOPBUTTONPAD. Yay!
+
+Instead of manually removing each of the new ones, or hoping that we know
+all the current ones, we can consider that the PNPIDs list that were given
+contains touchpads that have the trackstick buttons, either physically
+wired to them, or emulated with the top software button property.
+
+Thanks to the extra buttons capability in query $10, we can reliably detect
+the physical buttons from the software ones, and so we can remove the
+TOPBUTTONPAD property even if it was declared as such.
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Acked-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+---
+ drivers/input/mouse/synaptics.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
+index 8f6a153677b9..9d599eb79f17 100644
+--- a/drivers/input/mouse/synaptics.c
++++ b/drivers/input/mouse/synaptics.c
+@@ -1570,7 +1570,8 @@ static void set_input_params(struct psmouse *psmouse,
+ 
+ 	if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ 		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
+-		if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids))
++		if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
++		    !SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10))
+ 			__set_bit(INPUT_PROP_TOPBUTTONPAD, dev->propbit);
+ 		/* Clickpads report only left button */
+ 		__clear_bit(BTN_RIGHT, dev->keybit);
+-- 
+2.1.0
+

Input-synaptics-remove-X1-Carbon-3rd-gen-from-the-to.patch

@@ -0,0 +1,35 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Sun, 8 Mar 2015 22:38:55 -0700
+Subject: [PATCH] Input: synaptics - remove X1 Carbon 3rd gen from the
+ topbuttonpad list
+
+Lenovo decided to switch back to physical buttons for the trackstick on
+their latest series. The PNPId list was provided before they reverted back
+to physical buttons, so it contains the new models too.  We can know from
+the touchpad capabilities that the touchpad has physical buttons, so
+removing the ids from the list is not mandatory. It is still nicer to
+remove the wrong ids, so start by removing the X1 Carbon 3rd gen, with the
+PNPId of LEN0048.
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Acked-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+---
+ drivers/input/mouse/synaptics.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
+index ecc7811cbd46..160def02cde2 100644
+--- a/drivers/input/mouse/synaptics.c
++++ b/drivers/input/mouse/synaptics.c
+@@ -183,7 +183,6 @@ static const char * const topbuttonpad_pnp_ids[] = {
+ 	"LEN0045",
+ 	"LEN0046",
+ 	"LEN0047",
+-	"LEN0048",
+ 	"LEN0049",
+ 	"LEN2000",
+ 	"LEN2001", /* Edge E431 */
+-- 
+2.1.0
+

Input-synaptics-remove-X250-from-the-topbuttonpad-li.patch

@@ -0,0 +1,32 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Sun, 8 Mar 2015 22:39:17 -0700
+Subject: [PATCH] Input: synaptics - remove X250 from the topbuttonpad list
+
+Lenovo X250 has a PnpID of LEN0046, but it does not have the top software
+button requirement.
+
+For the record, Lenovo T450s and W541 have a PnpID of LEN200f and LEN004a,
+so they are not on the top software button list.
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Reviewed-by: Daniel Martin <consume.noise@gmail.com>
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+---
+ drivers/input/mouse/synaptics.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
+index 160def02cde2..ca7ca8d4eb33 100644
+--- a/drivers/input/mouse/synaptics.c
++++ b/drivers/input/mouse/synaptics.c
+@@ -181,7 +181,6 @@ static const char * const topbuttonpad_pnp_ids[] = {
+ 	"LEN0041",
+ 	"LEN0042", /* Yoga */
+ 	"LEN0045",
+-	"LEN0046",
+ 	"LEN0047",
+ 	"LEN0049",
+ 	"LEN2000",
+-- 
+2.1.0
+

Input-synaptics-retrieve-the-extended-capabilities-i.patch

@@ -0,0 +1,125 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Sun, 8 Mar 2015 22:34:03 -0700
+Subject: [PATCH] Input: synaptics - retrieve the extended capabilities in
+ query $10
+
+Newer Synaptics touchpads need to get information from the query $10.
+Retrieve it if available.
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Acked-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+---
+ drivers/input/mouse/synaptics.c | 23 ++++++++++++++++++++---
+ drivers/input/mouse/synaptics.h | 23 +++++++++++++++++++++++
+ 2 files changed, 43 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
+index 2176874a41b1..8f6a153677b9 100644
+--- a/drivers/input/mouse/synaptics.c
++++ b/drivers/input/mouse/synaptics.c
+@@ -241,11 +241,24 @@ static int synaptics_model_id(struct psmouse *psmouse)
+ 	return 0;
+ }
+ 
++static int synaptics_more_extended_queries(struct psmouse *psmouse)
++{
++	struct synaptics_data *priv = psmouse->private;
++	unsigned char buf[3];
++
++	if (synaptics_send_cmd(psmouse, SYN_QUE_MEXT_CAPAB_10, buf))
++		return -1;
++
++	priv->ext_cap_10 = (buf[0]<<16) | (buf[1]<<8) | buf[2];
++
++	return 0;
++}
++
+ /*
+- * Read the board id from the touchpad
++ * Read the board id and the "More Extended Queries" from the touchpad
+  * The board id is encoded in the "QUERY MODES" response
+  */
+-static int synaptics_board_id(struct psmouse *psmouse)
++static int synaptics_query_modes(struct psmouse *psmouse)
+ {
+ 	struct synaptics_data *priv = psmouse->private;
+ 	unsigned char bid[3];
+@@ -257,6 +270,10 @@ static int synaptics_board_id(struct psmouse *psmouse)
+ 	if (synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid))
+ 		return -1;
+ 	priv->board_id = ((bid[0] & 0xfc) << 6) | bid[1];
++
++	if (SYN_MEXT_CAP_BIT(bid[0]))
++		return synaptics_more_extended_queries(psmouse);
++
+ 	return 0;
+ }
+ 
+@@ -446,7 +463,7 @@ static int synaptics_query_hardware(struct psmouse *psmouse)
+ 		return -1;
+ 	if (synaptics_firmware_id(psmouse))
+ 		return -1;
+-	if (synaptics_board_id(psmouse))
++	if (synaptics_query_modes(psmouse))
+ 		return -1;
+ 	if (synaptics_capability(psmouse))
+ 		return -1;
+diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
+index 1bd01f21783b..8d3761ce8f54 100644
+--- a/drivers/input/mouse/synaptics.h
++++ b/drivers/input/mouse/synaptics.h
+@@ -22,6 +22,7 @@
+ #define SYN_QUE_EXT_CAPAB_0C		0x0c
+ #define SYN_QUE_EXT_MAX_COORDS		0x0d
+ #define SYN_QUE_EXT_MIN_COORDS		0x0f
++#define SYN_QUE_MEXT_CAPAB_10		0x10
+ 
+ /* synatics modes */
+ #define SYN_BIT_ABSOLUTE_MODE		(1 << 7)
+@@ -53,6 +54,7 @@
+ #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
+ #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
+ #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
++#define SYN_MEXT_CAP_BIT(m)		((m) & (1 << 1))
+ 
+ /*
+  * The following describes response for the 0x0c query.
+@@ -89,6 +91,26 @@
+ #define SYN_CAP_REDUCED_FILTERING(ex0c)	((ex0c) & 0x000400)
+ #define SYN_CAP_IMAGE_SENSOR(ex0c)	((ex0c) & 0x000800)
+ 
++/*
++ * The following descibes response for the 0x10 query.
++ *
++ * byte	mask	name			meaning
++ * ----	----	-------			------------
++ * 1	0x01	ext buttons are stick	buttons exported in the extended
++ *					capability are actually meant to be used
++ *					by the tracktick (pass-through).
++ * 1	0x02	SecurePad		the touchpad is a SecurePad, so it
++ *					contains a built-in fingerprint reader.
++ * 1	0xe0	more ext count		how many more extented queries are
++ *					available after this one.
++ * 2	0xff	SecurePad width		the width of the SecurePad fingerprint
++ *					reader.
++ * 3	0xff	SecurePad height	the height of the SecurePad fingerprint
++ *					reader.
++ */
++#define SYN_CAP_EXT_BUTTONS_STICK(ex10)	((ex10) & 0x010000)
++#define SYN_CAP_SECUREPAD(ex10)		((ex10) & 0x020000)
++
+ /* synaptics modes query bits */
+ #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
+ #define SYN_MODE_RATE(m)		((m) & (1 << 6))
+@@ -156,6 +178,7 @@ struct synaptics_data {
+ 	unsigned long int capabilities;		/* Capabilities */
+ 	unsigned long int ext_cap;		/* Extended Capabilities */
+ 	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
++	unsigned long int ext_cap_10;		/* Ext Caps from 0x10 query */
+ 	unsigned long int identity;		/* Identification */
+ 	unsigned int x_res, y_res;		/* X/Y resolution in units/mm */
+ 	unsigned int x_max, y_max;		/* Max coordinates (from FW) */
+-- 
+2.1.0
+

KEYS-Add-a-system-blacklist-keyring.patch

@@ -0,0 +1,111 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Fri, 26 Oct 2012 12:36:24 -0400
+Subject: [PATCH] KEYS: Add a system blacklist keyring
+
+This adds an additional keyring that is used to store certificates that
+are blacklisted.  This keyring is searched first when loading signed modules
+and if the module's certificate is found, it will refuse to load.  This is
+useful in cases where third party certificates are used for module signing.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ include/keys/system_keyring.h |  4 ++++
+ init/Kconfig                  |  9 +++++++++
+ kernel/module_signing.c       | 12 ++++++++++++
+ kernel/system_keyring.c       | 17 +++++++++++++++++
+ 4 files changed, 42 insertions(+)
+
+diff --git a/include/keys/system_keyring.h b/include/keys/system_keyring.h
+index 72665eb80692..2c7b80d31366 100644
+--- a/include/keys/system_keyring.h
++++ b/include/keys/system_keyring.h
+@@ -28,4 +28,8 @@ static inline struct key *get_system_trusted_keyring(void)
+ }
+ #endif
+ 
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++extern struct key *system_blacklist_keyring;
++#endif
++
+ #endif /* _KEYS_SYSTEM_KEYRING_H */
+diff --git a/init/Kconfig b/init/Kconfig
+index 9afb971497f4..ea0dbdf29b75 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1742,6 +1742,15 @@ config SYSTEM_TRUSTED_KEYRING
+ 
+ 	  Keys in this keyring are used by module signature checking.
+ 
++config SYSTEM_BLACKLIST_KEYRING
++	bool "Provide system-wide ring of blacklisted keys"
++	depends on KEYS
++	help
++	  Provide a system keyring to which blacklisted keys can be added.
++	  Keys in the keyring are considered entirely untrusted.  Keys in this
++	  keyring are used by the module signature checking to reject loading
++	  of modules signed with a blacklisted key.
++
+ config PROFILING
+ 	bool "Profiling support"
+ 	help
+diff --git a/kernel/module_signing.c b/kernel/module_signing.c
+index be5b8fac4bd0..fed815fcdaf2 100644
+--- a/kernel/module_signing.c
++++ b/kernel/module_signing.c
+@@ -158,6 +158,18 @@ static struct key *request_asymmetric_key(const char *signer, size_t signer_len,
+ 
+ 	pr_debug("Look up: \"%s\"\n", id);
+ 
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++	key = keyring_search(make_key_ref(system_blacklist_keyring, 1),
++				   &key_type_asymmetric, id);
++	if (!IS_ERR(key)) {
++		/* module is signed with a cert in the blacklist.  reject */
++		pr_err("Module key '%s' is in blacklist\n", id);
++		key_ref_put(key);
++		kfree(id);
++		return ERR_PTR(-EKEYREJECTED);
++	}
++#endif
++
+ 	key = keyring_search(make_key_ref(system_trusted_keyring, 1),
+ 			     &key_type_asymmetric, id);
+ 	if (IS_ERR(key))
+diff --git a/kernel/system_keyring.c b/kernel/system_keyring.c
+index 875f64e8935b..c15e93f5a418 100644
+--- a/kernel/system_keyring.c
++++ b/kernel/system_keyring.c
+@@ -20,6 +20,9 @@
+ 
+ struct key *system_trusted_keyring;
+ EXPORT_SYMBOL_GPL(system_trusted_keyring);
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++struct key *system_blacklist_keyring;
++#endif
+ 
+ extern __initconst const u8 system_certificate_list[];
+ extern __initconst const unsigned long system_certificate_list_size;
+@@ -41,6 +44,20 @@ static __init int system_trusted_keyring_init(void)
+ 		panic("Can't allocate system trusted keyring\n");
+ 
+ 	set_bit(KEY_FLAG_TRUSTED_ONLY, &system_trusted_keyring->flags);
++
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++	system_blacklist_keyring = keyring_alloc(".system_blacklist_keyring",
++				    KUIDT_INIT(0), KGIDT_INIT(0),
++				    current_cred(),
++				    (KEY_POS_ALL & ~KEY_POS_SETATTR) |
++				    KEY_USR_VIEW | KEY_USR_READ,
++				    KEY_ALLOC_NOT_IN_QUOTA, NULL);
++	if (IS_ERR(system_blacklist_keyring))
++		panic("Can't allocate system blacklist keyring\n");
++
++	set_bit(KEY_FLAG_TRUSTED_ONLY, &system_blacklist_keyring->flags);
++#endif
++
+ 	return 0;
+ }
+ 
+-- 
+2.1.0
+

Kbuild-Add-an-option-to-enable-GCC-VTA.patch

@@ -0,0 +1,92 @@
+From: Josh Stone <jistone@redhat.com>
+Date: Fri, 21 Nov 2014 10:40:00 -0800
+Subject: [PATCH] Kbuild: Add an option to enable GCC VTA
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Due to recent codegen issues, gcc -fvar-tracking-assignments was
+unconditionally disabled in commit 2062afb4f804a ("Fix gcc-4.9.0
+miscompilation of load_balance() in scheduler").  However, this reduces
+the debuginfo coverage for variable locations, especially in inline
+functions.  VTA is certainly not perfect either in those cases, but it
+is much better than without.  With compiler versions that have fixed the
+codegen bugs, we would prefer to have the better details for SystemTap,
+and surely other debuginfo consumers like perf will benefit as well.
+
+This patch simply makes CONFIG_DEBUG_INFO_VTA an option.  I considered
+Frank and Linus's discussion of a cc-option-like -fcompare-debug test,
+but I'm convinced that a narrow test of an arch-specific codegen issue
+is not really useful.  GCC has their own regression tests for this, so
+I'd suggest GCC_COMPARE_DEBUG=-fvar-tracking-assignments-toggle is more
+useful for kernel developers to test confidence.
+
+In fact, I ran into a couple more issues when testing for this patch[1],
+although neither of those had any codegen impact.
+ [1] https://bugzilla.redhat.com/show_bug.cgi?id=1140872
+
+With gcc-4.9.2-1.fc22, I can now build v3.18-rc5 with Fedora's i686 and
+x86_64 configs, and this is completely clean with GCC_COMPARE_DEBUG.
+
+Cc: Frank Ch. Eigler <fche@redhat.com>
+Cc: Jakub Jelinek <jakub@redhat.com>
+Cc: Josh Boyer <jwboyer@fedoraproject.org>
+Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Cc: Linus Torvalds <torvalds@linux-foundation.org>
+Cc: Andrew Morton <akpm@linux-foundation.org>
+Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
+Cc: Michel Dänzer <michel@daenzer.net>
+Signed-off-by: Josh Stone <jistone@redhat.com>
+---
+ Makefile          |  4 ++++
+ lib/Kconfig.debug | 18 +++++++++++++++++-
+ 2 files changed, 21 insertions(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 633b5f0f11a0..5a2aedee1fc9 100644
+--- a/Makefile
++++ b/Makefile
+@@ -706,7 +706,11 @@ KBUILD_CFLAGS	+= -fomit-frame-pointer
+ endif
+ endif
+ 
++ifdef CONFIG_DEBUG_INFO_VTA
++KBUILD_CFLAGS   += $(call cc-option, -fvar-tracking-assignments)
++else
+ KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
++endif
+ 
+ ifdef CONFIG_DEBUG_INFO
+ ifdef CONFIG_DEBUG_INFO_SPLIT
+diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
+index 5f2ce616c046..6525e2a5619a 100644
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -165,7 +165,23 @@ config DEBUG_INFO_DWARF4
+ 	  Generate dwarf4 debug info. This requires recent versions
+ 	  of gcc and gdb. It makes the debug information larger.
+ 	  But it significantly improves the success of resolving
+-	  variables in gdb on optimized code.
++	  variables in gdb on optimized code.  The gcc docs also
++	  recommend enabling -fvar-tracking-assignments for maximum
++	  benefit. (see DEBUG_INFO_VTA)
++
++config DEBUG_INFO_VTA
++	bool "Enable var-tracking-assignments for debuginfo"
++	depends on DEBUG_INFO
++	help
++	  Enable gcc -fvar-tracking-assignments for improved debug
++	  information on variable locations in optimized code.  Per
++	  gcc, DEBUG_INFO_DWARF4 is recommended for best use of VTA.
++
++	  VTA has been implicated in codegen bugs (gcc PR61801,
++	  PR61904), so this may deserve some caution.  One can set
++	  GCC_COMPARE_DEBUG=-fvar-tracking-assignments-toggle in the
++	  environment to automatically compile everything both ways,
++	  generating an error if anything differs.
+ 
+ config ENABLE_WARN_DEPRECATED
+ 	bool "Enable __deprecated logic"
+-- 
+2.1.0
+

MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch

@@ -0,0 +1,185 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Fri, 26 Oct 2012 12:42:16 -0400
+Subject: [PATCH] MODSIGN: Import certificates from UEFI Secure Boot
+
+Secure Boot stores a list of allowed certificates in the 'db' variable.
+This imports those certificates into the system trusted keyring.  This
+allows for a third party signing certificate to be used in conjunction
+with signed modules.  By importing the public certificate into the 'db'
+variable, a user can allow a module signed with that certificate to
+load.  The shim UEFI bootloader has a similar certificate list stored
+in the 'MokListRT' variable.  We import those as well.
+
+In the opposite case, Secure Boot maintains a list of disallowed
+certificates in the 'dbx' variable.  We load those certificates into
+the newly introduced system blacklist keyring and forbid any module
+signed with those from loading.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ include/linux/efi.h   |  6 ++++
+ init/Kconfig          |  9 +++++
+ kernel/Makefile       |  3 ++
+ kernel/modsign_uefi.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 110 insertions(+)
+ create mode 100644 kernel/modsign_uefi.c
+
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index fb972b96959a..581878071c85 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -595,6 +595,12 @@ void efi_native_runtime_setup(void);
+ #define EFI_CERT_X509_GUID \
+     EFI_GUID(  0xa5c059a1, 0x94e4, 0x4aa7, 0x87, 0xb5, 0xab, 0x15, 0x5c, 0x2b, 0xf0, 0x72 )
+ 
++#define EFI_IMAGE_SECURITY_DATABASE_GUID \
++    EFI_GUID(  0xd719b2cb, 0x3d3a, 0x4596, 0xa3, 0xbc, 0xda, 0xd0, 0x0e, 0x67, 0x65, 0x6f )
++
++#define EFI_SHIM_LOCK_GUID \
++    EFI_GUID(  0x605dab50, 0xe046, 0x4300, 0xab, 0xb6, 0x3d, 0xd8, 0x10, 0xdd, 0x8b, 0x23 )
++
+ typedef struct {
+ 	efi_guid_t guid;
+ 	u64 table;
+diff --git a/init/Kconfig b/init/Kconfig
+index ea0dbdf29b75..dac9ed0f01f7 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1896,6 +1896,15 @@ config MODULE_SIG_ALL
+ comment "Do not forget to sign required modules with scripts/sign-file"
+ 	depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
+ 
++config MODULE_SIG_UEFI
++	bool "Allow modules signed with certs stored in UEFI"
++	depends on MODULE_SIG && SYSTEM_BLACKLIST_KEYRING && EFI
++	select EFI_SIGNATURE_LIST_PARSER
++	help
++	  This will import certificates stored in UEFI and allow modules
++	  signed with those to be loaded.  It will also disallow loading
++	  of modules stored in the UEFI dbx variable.
++
+ choice
+ 	prompt "Which hash algorithm should modules be signed with?"
+ 	depends on MODULE_SIG
+diff --git a/kernel/Makefile b/kernel/Makefile
+index a59481a3fa6c..04b4ba9e0c9d 100644
+--- a/kernel/Makefile
++++ b/kernel/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_UID16) += uid16.o
+ obj-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += system_keyring.o system_certificates.o
+ obj-$(CONFIG_MODULES) += module.o
+ obj-$(CONFIG_MODULE_SIG) += module_signing.o
++obj-$(CONFIG_MODULE_SIG_UEFI) += modsign_uefi.o
+ obj-$(CONFIG_KALLSYMS) += kallsyms.o
+ obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
+ obj-$(CONFIG_KEXEC) += kexec.o
+@@ -98,6 +99,8 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o
+ 
+ $(obj)/configs.o: $(obj)/config_data.h
+ 
++$(obj)/modsign_uefi.o: KBUILD_CFLAGS += -fshort-wchar
++
+ # config_data.h contains the same information as ikconfig.h but gzipped.
+ # Info from config_data can be extracted from /proc/config*
+ targets += config_data.gz
+diff --git a/kernel/modsign_uefi.c b/kernel/modsign_uefi.c
+new file mode 100644
+index 000000000000..94b0eb38a284
+--- /dev/null
++++ b/kernel/modsign_uefi.c
+@@ -0,0 +1,92 @@
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/cred.h>
++#include <linux/err.h>
++#include <linux/efi.h>
++#include <linux/slab.h>
++#include <keys/asymmetric-type.h>
++#include <keys/system_keyring.h>
++#include "module-internal.h"
++
++static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, unsigned long *size)
++{
++	efi_status_t status;
++	unsigned long lsize = 4;
++	unsigned long tmpdb[4];
++	void *db = NULL;
++
++	status = efi.get_variable(name, guid, NULL, &lsize, &tmpdb);
++	if (status != EFI_BUFFER_TOO_SMALL) {
++		pr_err("Couldn't get size: 0x%lx\n", status);
++		return NULL;
++	}
++
++	db = kmalloc(lsize, GFP_KERNEL);
++	if (!db) {
++		pr_err("Couldn't allocate memory for uefi cert list\n");
++		goto out;
++	}
++
++	status = efi.get_variable(name, guid, NULL, &lsize, db);
++	if (status != EFI_SUCCESS) {
++		kfree(db);
++		db = NULL;
++		pr_err("Error reading db var: 0x%lx\n", status);
++	}
++out:
++	*size = lsize;
++	return db;
++}
++
++/*
++ *  * Load the certs contained in the UEFI databases
++ *   */
++static int __init load_uefi_certs(void)
++{
++	efi_guid_t secure_var = EFI_IMAGE_SECURITY_DATABASE_GUID;
++	efi_guid_t mok_var = EFI_SHIM_LOCK_GUID;
++	void *db = NULL, *dbx = NULL, *mok = NULL;
++	unsigned long dbsize = 0, dbxsize = 0, moksize = 0;
++	int rc = 0;
++
++	/* Check if SB is enabled and just return if not */
++	if (!efi_enabled(EFI_SECURE_BOOT))
++		return 0;
++
++	/* Get db, MokListRT, and dbx.  They might not exist, so it isn't
++	 * an error if we can't get them.
++	 */
++	db = get_cert_list(L"db", &secure_var, &dbsize);
++	if (!db) {
++		pr_err("MODSIGN: Couldn't get UEFI db list\n");
++	} else {
++		rc = parse_efi_signature_list(db, dbsize, system_trusted_keyring);
++		if (rc)
++			pr_err("Couldn't parse db signatures: %d\n", rc);
++		kfree(db);
++	}
++
++	mok = get_cert_list(L"MokListRT", &mok_var, &moksize);
++	if (!mok) {
++		pr_info("MODSIGN: Couldn't get UEFI MokListRT\n");
++	} else {
++		rc = parse_efi_signature_list(mok, moksize, system_trusted_keyring);
++		if (rc)
++			pr_err("Couldn't parse MokListRT signatures: %d\n", rc);
++		kfree(mok);
++	}
++
++	dbx = get_cert_list(L"dbx", &secure_var, &dbxsize);
++	if (!dbx) {
++		pr_info("MODSIGN: Couldn't get UEFI dbx list\n");
++	} else {
++		rc = parse_efi_signature_list(dbx, dbxsize,
++			system_blacklist_keyring);
++		if (rc)
++			pr_err("Couldn't parse dbx signatures: %d\n", rc);
++		kfree(dbx);
++	}
++
++	return rc;
++}
++late_initcall(load_uefi_certs);
+-- 
+2.1.0
+

MODSIGN-Support-not-importing-certs-from-db.patch

@@ -0,0 +1,83 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Thu, 3 Oct 2013 10:14:23 -0400
+Subject: [PATCH] MODSIGN: Support not importing certs from db
+
+If a user tells shim to not use the certs/hashes in the UEFI db variable
+for verification purposes, shim will set a UEFI variable called MokIgnoreDB.
+Have the uefi import code look for this and not import things from the db
+variable.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ kernel/modsign_uefi.c | 40 +++++++++++++++++++++++++++++++---------
+ 1 file changed, 31 insertions(+), 9 deletions(-)
+
+diff --git a/kernel/modsign_uefi.c b/kernel/modsign_uefi.c
+index 94b0eb38a284..ae28b974d49a 100644
+--- a/kernel/modsign_uefi.c
++++ b/kernel/modsign_uefi.c
+@@ -8,6 +8,23 @@
+ #include <keys/system_keyring.h>
+ #include "module-internal.h"
+ 
++static __init int check_ignore_db(void)
++{
++	efi_status_t status;
++	unsigned int db = 0;
++	unsigned long size = sizeof(db);
++	efi_guid_t guid = EFI_SHIM_LOCK_GUID;
++
++	/* Check and see if the MokIgnoreDB variable exists.  If that fails
++	 * then we don't ignore DB.  If it succeeds, we do.
++	 */
++	status = efi.get_variable(L"MokIgnoreDB", &guid, NULL, &size, &db);
++	if (status != EFI_SUCCESS)
++		return 0;
++
++	return 1;
++}
++
+ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, unsigned long *size)
+ {
+ 	efi_status_t status;
+@@ -47,23 +64,28 @@ static int __init load_uefi_certs(void)
+ 	efi_guid_t mok_var = EFI_SHIM_LOCK_GUID;
+ 	void *db = NULL, *dbx = NULL, *mok = NULL;
+ 	unsigned long dbsize = 0, dbxsize = 0, moksize = 0;
+-	int rc = 0;
++	int ignore_db, rc = 0;
+ 
+ 	/* Check if SB is enabled and just return if not */
+ 	if (!efi_enabled(EFI_SECURE_BOOT))
+ 		return 0;
+ 
++	/* See if the user has setup Ignore DB mode */
++	ignore_db = check_ignore_db();
++
+ 	/* Get db, MokListRT, and dbx.  They might not exist, so it isn't
+ 	 * an error if we can't get them.
+ 	 */
+-	db = get_cert_list(L"db", &secure_var, &dbsize);
+-	if (!db) {
+-		pr_err("MODSIGN: Couldn't get UEFI db list\n");
+-	} else {
+-		rc = parse_efi_signature_list(db, dbsize, system_trusted_keyring);
+-		if (rc)
+-			pr_err("Couldn't parse db signatures: %d\n", rc);
+-		kfree(db);
++	if (!ignore_db) {
++		db = get_cert_list(L"db", &secure_var, &dbsize);
++		if (!db) {
++			pr_err("MODSIGN: Couldn't get UEFI db list\n");
++		} else {
++			rc = parse_efi_signature_list(db, dbsize, system_trusted_keyring);
++			if (rc)
++				pr_err("Couldn't parse db signatures: %d\n", rc);
++			kfree(db);
++		}
+ 	}
+ 
+ 	mok = get_cert_list(L"MokListRT", &mok_var, &moksize);
+-- 
+2.1.0
+

Makefile

@@ -0,0 +1,125 @@
+# Makefile for source rpm: kernel
+SPECFILE := kernel.spec
+
+# we only check the .sign signatures
+UPSTREAM_CHECKS = sign
+
+.PHONY: help
+help:
+%:
+	@echo "Try fedpkg $@ or something like that"
+	@exit 1
+
+include Makefile.config
+
+prep:
+	fedpkg -v prep
+
+noarch:
+	fedpkg -v local --arch=noarch
+
+# 'make local' also needs to build the noarch firmware package
+local: noarch
+	fedpkg -v local
+
+extremedebug:
+	@perl -pi -e 's/# CONFIG_DEBUG_PAGEALLOC is not set/CONFIG_DEBUG_PAGEALLOC=y/' config-nodebug
+
+debug:
+	@perl -pi -e 's/# CONFIG_LOCK_STAT is not set/CONFIG_LOCK_STAT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_STACK_USAGE is not set/CONFIG_DEBUG_STACK_USAGE=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SLAB is not set/CONFIG_DEBUG_SLAB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_MUTEXES is not set/CONFIG_DEBUG_MUTEXES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_RT_MUTEXES is not set/CONFIG_DEBUG_RT_MUTEXES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_LOCK_ALLOC is not set/CONFIG_DEBUG_LOCK_ALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_LOCK_TORTURE_TEST is not set/CONFIG_LOCK_TORTURE_TEST=m/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PROVE_LOCKING is not set/CONFIG_PROVE_LOCKING=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PROVE_RCU is not set/CONFIG_PROVE_RCU=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SPINLOCK is not set/CONFIG_DEBUG_SPINLOCK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_VM is not set/CONFIG_DEBUG_VM=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION is not set/CONFIG_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAILSLAB is not set/CONFIG_FAILSLAB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_PAGE_ALLOC is not set/CONFIG_FAIL_PAGE_ALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_IO_TIMEOUT is not set/CONFIG_FAIL_IO_TIMEOUT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_MAKE_REQUEST is not set/CONFIG_FAIL_MAKE_REQUEST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_MMC_REQUEST is not set/CONFIG_FAIL_MMC_REQUEST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/CONFIG_FAULT_INJECTION_DEBUG_FS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PI_LIST is not set/CONFIG_DEBUG_PI_LIST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_WRITECOUNT is not set/CONFIG_DEBUG_WRITECOUNT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS is not set/CONFIG_DEBUG_OBJECTS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_FREE is not set/CONFIG_DEBUG_OBJECTS_FREE=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/CONFIG_DEBUG_OBJECTS_TIMERS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_WORK is not set/CONFIG_DEBUG_OBJECTS_WORK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_X86_PTDUMP is not set/CONFIG_X86_PTDUMP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_EFI_PGT_DUMP is not set/CONFIG_EFI_PGT_DUMP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CAN_DEBUG_DEVICES is not set/CONFIG_CAN_DEBUG_DEVICES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_MODULE_FORCE_UNLOAD is not set/CONFIG_MODULE_FORCE_UNLOAD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/CONFIG_SYSCTL_SYSCALL_CHECK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_NOTIFIERS is not set/CONFIG_DEBUG_NOTIFIERS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMA_API_DEBUG is not set/CONFIG_DMA_API_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic
+	@perl -pi -e 's/# CONFIG_PM_ADVANCED_DEBUG is not set/CONFIG_PM_ADVANCED_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_B43_DEBUG is not set/CONFIG_B43_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_B43LEGACY_DEBUG is not set/CONFIG_B43LEGACY_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_MMIOTRACE is not set/CONFIG_MMIOTRACE=y/' config-nodebug
+	@perl -pi -e 's/CONFIG_STRIP_ASM_SYMS=y/# CONFIG_STRIP_ASM_SYMS is not set/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_CREDENTIALS is not set/CONFIG_DEBUG_CREDENTIALS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_ACPI_DEBUG is not set/CONFIG_ACPI_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_EXT4_DEBUG is not set/CONFIG_EXT4_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/CONFIG_DEBUG_PERF_USE_VMALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_JBD2_DEBUG is not set/CONFIG_JBD2_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_NFSD_FAULT_INJECTION is not set/CONFIG_NFSD_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_BLK_CGROUP is not set/CONFIG_DEBUG_BLK_CGROUP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DRBD_FAULT_INJECTION is not set/CONFIG_DRBD_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_ATH_DEBUG is not set/CONFIG_ATH_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CARL9170_DEBUGFS is not set/CONFIG_CARL9170_DEBUGFS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/CONFIG_IWLWIFI_DEVICE_TRACING=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMADEVICES_DEBUG is not set/CONFIG_DMADEVICES_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMADEVICES_VDEBUG is not set/CONFIG_DMADEVICES_VDEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/CONFIG_CEPH_LIB_PRETTYDEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_QUOTA_DEBUG is not set/CONFIG_QUOTA_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_KGDB_KDB is not set/CONFIG_KGDB_KDB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_KDB_KEYBOARD is not set/CONFIG_KDB_KEYBOARD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PER_CPU_MAPS is not set/CONFIG_DEBUG_PER_CPU_MAPS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_TEST_LIST_SORT is not set/CONFIG_TEST_LIST_SORT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/CONFIG_DEBUG_ATOMIC_SLEEP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DETECT_HUNG_TASK is not set/CONFIG_DETECT_HUNG_TASK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_KMEMLEAK is not set/CONFIG_DEBUG_KMEMLEAK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/' config-nodebug
+
+	@# just in case we're going from extremedebug -> debug
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
+
+	@perl -pi -e 's/# CONFIG_MAXSMP is not set/CONFIG_MAXSMP=y/' config-x86-generic
+
+	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
+	@rpmdev-bumpspec -c "Reenable debugging options." kernel.spec
+
+nodebuginfo:
+	@perl -pi -e 's/^%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 1\}/%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 0\}/' kernel.spec
+nodebug: release
+	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
+release: config-release
+	@perl -pi -e 's/^%define debugbuildsenabled 0/%define debugbuildsenabled 1/' kernel.spec
+	@rpmdev-bumpspec -c "Disable debugging options." kernel.spec
+
+include Makefile.release
+
+unused-kernel-patches:
+	@for f in *.patch; do if [ -e $$f ]; then (egrep -q "^Patch[[:digit:]]+:[[:space:]]+$$f" $(SPECFILE) || echo "Unused:    $$f") && egrep -q "^ApplyPatch[[:space:]]+$$f|^ApplyOptionalPatch[[:space:]]+$$f" $(SPECFILE) || echo "Unapplied: $$f"; fi; done
+
+ifeq ($(MAKECMDGOALS),me a sandwich)
+.PHONY: me a sandwich
+me a:
+	@:
+
+sandwich:
+	@[ `id -u` -ne 0 ] && echo "What? Make it yourself." || echo Okay.
+endif

Makefile.config

@@ -0,0 +1,132 @@
+# Make rules for configuration files.
+#
+# $Id$
+
+CFG		= kernel-$(VERSION)
+
+CONFIGFILES	= \
+	$(CFG)-i686.config $(CFG)-i686-debug.config \
+	$(CFG)-i686-PAE.config $(CFG)-i686-PAEdebug.config \
+	$(CFG)-x86_64.config $(CFG)-x86_64-debug.config \
+	$(CFG)-s390x.config \
+	$(CFG)-armv7hl.config $(CFG)-armv7hl-lpae.config \
+	$(CFG)-aarch64.config \
+	$(CFG)-ppc64.config $(CFG)-ppc64p7.config $(CFG)-ppc64-debug.config \
+	$(CFG)-ppc64le.config
+
+PLATFORMS	= x86 x86_64 powerpc powerpc64 s390x arm arm64
+TEMPFILES	= $(addprefix temp-, $(addsuffix -generic, $(PLATFORMS)))
+
+configs: $(CONFIGFILES)
+	@rm -f kernel-*-config
+	@rm -f $(TEMPFILES)
+	@rm -f temp-generic temp-*-generic temp-*-generic-tmp
+
+# Augment the clean target to clean up our own cruft
+clean ::
+	@rm -fv $(CONFIGFILES) $(TEMPFILES) temp-generic kernel-$(VERSION)*config
+
+temp-generic: config-generic config-nodebug
+	cat $^ > temp-generic
+
+temp-debug-generic: config-generic config-debug
+	cat $^ > temp-debug-generic
+
+temp-no-extra-generic: config-no-extra temp-generic
+	perl merge.pl $^ > $@
+
+temp-arm-generic: config-arm-generic temp-no-extra-generic
+	perl merge.pl $^ > $@
+
+temp-armv7-generic: config-armv7-generic temp-arm-generic
+	perl merge.pl $^ > $@
+
+temp-armv7: config-armv7 temp-armv7-generic
+	perl merge.pl $^ > $@
+
+temp-armv7-lpae: config-armv7-lpae temp-armv7-generic
+	perl merge.pl $^ > $@
+
+temp-arm-debug-generic: temp-arm-generic temp-debug-generic
+	perl merge.pl $^ > $@
+
+temp-arm64: config-arm64 temp-arm-generic
+	perl merge.pl $^ > $@
+
+temp-arm64-debug: config-arm64 temp-arm-debug-generic
+	perl merge.pl $^ > $@
+
+temp-x86-32: config-x86-32-generic config-x86-generic
+	perl merge.pl $^  > $@
+
+temp-x86-32-generic: temp-x86-32 temp-generic
+	perl merge.pl $^  > $@
+
+temp-x86-debug-generic: temp-x86-32 temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-x86-64: config-x86_64-generic config-x86-generic
+	perl merge.pl $^  > $@
+
+temp-x86_64-generic: temp-x86-64 temp-generic
+	perl merge.pl $^  > $@
+
+temp-x86_64-debug-generic: temp-x86-64 temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc-generic: config-powerpc-generic temp-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc-debug-generic: config-powerpc-generic temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc64-generic: config-powerpc64 temp-powerpc-generic
+	perl merge.pl $^ > $@
+
+temp-powerpc64le-generic: config-powerpc64le temp-powerpc64-generic
+	perl merge.pl $^ > $@
+
+temp-s390-generic: config-s390x temp-generic
+	perl merge.pl $^ > $@
+
+$(CFG)-i686-PAE.config: config-i686-PAE temp-x86-32-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-i686-PAEdebug.config: config-i686-PAE temp-x86-debug-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-i686.config: /dev/null temp-x86-32-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-i686-debug.config: /dev/null temp-x86-debug-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-x86_64.config: /dev/null temp-x86_64-generic
+	perl merge.pl $^ x86_64 > $@
+
+$(CFG)-x86_64-debug.config: /dev/null temp-x86_64-debug-generic
+	perl merge.pl $^ x86_64 > $@
+
+$(CFG)-ppc64.config: /dev/null temp-powerpc64-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-ppc64-debug.config: temp-powerpc64-generic temp-powerpc-debug-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-ppc64p7.config: config-powerpc64p7 temp-powerpc64-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-ppc64le.config: /dev/null temp-powerpc64le-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-s390x.config: config-s390x temp-s390-generic
+	perl merge.pl $^ s390 > $@
+
+$(CFG)-armv7hl.config: /dev/null temp-armv7
+	perl merge.pl $^ arm > $@
+
+$(CFG)-armv7hl-lpae.config: /dev/null temp-armv7-lpae
+	perl merge.pl $^ arm > $@
+
+$(CFG)-aarch64.config: /dev/null temp-arm64
+	perl merge.pl $^ arm64 > $@

Makefile.release

@@ -0,0 +1,90 @@
+# Make rules for configuration files.
+#
+# $Id$
+
+# This file contains only entries that change the config files.
+# Anything that changes kernel.spec itself should go in the main Makefile.
+
+config-release:
+	@perl -pi -e 's/CONFIG_LOCK_STAT=y/# CONFIG_LOCK_STAT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_STACK_USAGE=y/# CONFIG_DEBUG_STACK_USAGE is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SLAB=y/# CONFIG_DEBUG_SLAB is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_MUTEXES=y/# CONFIG_DEBUG_MUTEXES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_RT_MUTEXES=y/# CONFIG_DEBUG_RT_MUTEXES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_LOCK_ALLOC=y/# CONFIG_DEBUG_LOCK_ALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_LOCK_TORTURE_TEST=m/# CONFIG_LOCK_TORTURE_TEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PROVE_LOCKING=y/# CONFIG_PROVE_LOCKING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PROVE_RCU=y/# CONFIG_PROVE_RCU is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SPINLOCK=y/# CONFIG_DEBUG_SPINLOCK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_VM=y/# CONFIG_DEBUG_VM is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION=y/# CONFIG_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAILSLAB=y/# CONFIG_FAILSLAB is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_PAGE_ALLOC=y/# CONFIG_FAIL_PAGE_ALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_IO_TIMEOUT=y/# CONFIG_FAIL_IO_TIMEOUT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_MAKE_REQUEST=y/# CONFIG_FAIL_MAKE_REQUEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_MMC_REQUEST=y/# CONFIG_FAIL_MMC_REQUEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION_DEBUG_FS=y/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PI_LIST=y/# CONFIG_DEBUG_PI_LIST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_WRITECOUNT=y/# CONFIG_DEBUG_WRITECOUNT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS=y/# CONFIG_DEBUG_OBJECTS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_FREE=y/# CONFIG_DEBUG_OBJECTS_FREE is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_TIMERS=y/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_WORK=y/# CONFIG_DEBUG_OBJECTS_WORK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_X86_PTDUMP=y/# CONFIG_X86_PTDUMP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_EFI_PGT_DUMP=y/# CONFIG_EFI_PGT_DUMP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CAN_DEBUG_DEVICES=y/# CONFIG_CAN_DEBUG_DEVICES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_MODULE_FORCE_UNLOAD=y/# CONFIG_MODULE_FORCE_UNLOAD is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_SYSCTL_SYSCALL_CHECK=y/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_NOTIFIERS=y/# CONFIG_DEBUG_NOTIFIERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMA_API_DEBUG=y/# CONFIG_DMA_API_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PM_TEST_SUSPEND=y/# CONFIG_PM_TEST_SUSPEND is not set/' config-generic
+	@perl -pi -e 's/CONFIG_PM_ADVANCED_DEBUG=y/# CONFIG_PM_ADVANCED_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_B43_DEBUG=y/# CONFIG_B43_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_B43LEGACY_DEBUG=y/# CONFIG_B43LEGACY_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_MMIOTRACE=y/# CONFIG_MMIOTRACE is not set/' config-nodebug
+	@perl -pi -e 's/# CONFIG_STRIP_ASM_SYMS is not set/CONFIG_STRIP_ASM_SYMS=y/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_CREDENTIALS=y/# CONFIG_DEBUG_CREDENTIALS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_ACPI_DEBUG=y/# CONFIG_ACPI_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_EXT4_DEBUG=y/# CONFIG_EXT4_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PERF_USE_VMALLOC=y/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_JBD2_DEBUG=y/# CONFIG_JBD2_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_NFSD_FAULT_INJECTION=y/# CONFIG_NFSD_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_BLK_CGROUP=y/# CONFIG_DEBUG_BLK_CGROUP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DRBD_FAULT_INJECTION=y/# CONFIG_DRBD_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_ATH_DEBUG=y/# CONFIG_ATH_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CARL9170_DEBUGFS=y/# CONFIG_CARL9170_DEBUGFS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_IWLWIFI_DEVICE_TRACING=y/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMADEVICES_DEBUG=y/# CONFIG_DMADEVICES_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMADEVICES_VDEBUG=y/# CONFIG_DMADEVICES_VDEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CEPH_LIB_PRETTYDEBUG=y/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_QUOTA_DEBUG=y/# CONFIG_QUOTA_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PER_CPU_MAPS=y/# CONFIG_DEBUG_PER_CPU_MAPS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PERCPU_TEST=m/# CONFIG_PERCPU_TEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_TEST_LIST_SORT=y/# CONFIG_TEST_LIST_SORT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_TEST_STRING_HELPERS=m/# CONFIG_TEST_STRING_HELPERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_ATOMIC_SLEEP=y/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DETECT_HUNG_TASK=y/# CONFIG_DETECT_HUNG_TASK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_KMEMLEAK=y/# CONFIG_DEBUG_KMEMLEAK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_MAC80211_MESSAGE_TRACING=y/# CONFIG_MAC80211_MESSAGE_TRACING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_XFS_WARN=y/# CONFIG_XFS_WARN is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_EDAC_DEBUG=y/# CONFIG_EDAC_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_RTLWIFI_DEBUG=y/# CONFIG_RTLWIFI_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/' config-nodebug
+
+	@# Undo anything that make extremedebug might have set
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-debug
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
+
+	@# Change defaults back to sane things.
+	@perl -pi -e 's/CONFIG_MAXSMP=y/# CONFIG_MAXSMP is not set/' config-x86-generic
+
+	@perl -pi -e 's/CONFIG_SCHEDSTATS=y/# CONFIG_SCHEDSTATS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_LATENCYTOP=y/# CONFIG_LATENCYTOP is not set/' config-nodebug
+

Makefile.rhelver

@@ -1,45 +0,0 @@
-RHEL_MAJOR = 8
-RHEL_MINOR = 99
-
-#
-# RHEL_RELEASE
-# -------------
-#
-# Represents build number in 'release' part of RPM's name-version-release.
-#   name is <package_name>, e.g. kernel
-#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
-#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-RHEL_RELEASE = 122
-
-#
-# Early y+1 numbering
-# --------------------
-#
-# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
-# First is RHEL_RELEASE inherited/merged from y as-is, second number
-# is incremented with each build starting from 1. After merge from y,
-# it resets back to 1. This way y+1 nvr reflects status of last merge.
-#
-# Example:
-#
-# rhel8.0                        rhel-8.1
-#   kernel-4.18.0-58.el8   -->     kernel-4.18.0-58.1.el8
-#                                  kernel-4.18.0-58.2.el8
-#   kernel-4.18.0-59.el8           kernel-4.18.0-59.1.el8
-#   kernel-4.18.0-60.el8
-#   kernel-4.18.0-61.el8   -->     kernel-4.18.0-61.1.el8
-#
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-EARLY_YSTREAM ?= no
-EARLY_YBUILD:=
-EARLY_YRELEASE:=
-ifneq ("$(ZSTREAM)", "yes")
-  ifeq ("$(EARLY_YSTREAM)","yes")
-    RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
-  endif
-endif

PCI-Lock-down-BAR-access-when-module-security-is-ena.patch

@@ -0,0 +1,116 @@
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Thu, 8 Mar 2012 10:10:38 -0500
+Subject: [PATCH] PCI: Lock down BAR access when module security is enabled
+
+Any hardware that can potentially generate DMA has to be locked down from
+userspace in order to avoid it being possible for an attacker to modify
+kernel code, allowing them to circumvent disabled module loading or module
+signing. Default to paranoid - in future we can potentially relax this for
+sufficiently IOMMU-isolated devices.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/pci/pci-sysfs.c | 10 ++++++++++
+ drivers/pci/proc.c      |  8 +++++++-
+ drivers/pci/syscall.c   |  3 ++-
+ 3 files changed, 19 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
+index 312f23a8429c..93e6ac103dd0 100644
+--- a/drivers/pci/pci-sysfs.c
++++ b/drivers/pci/pci-sysfs.c
+@@ -30,6 +30,7 @@
+ #include <linux/vgaarb.h>
+ #include <linux/pm_runtime.h>
+ #include <linux/of.h>
++#include <linux/module.h>
+ #include "pci.h"
+ 
+ static int sysfs_initialized;	/* = 0 */
+@@ -710,6 +711,9 @@ static ssize_t pci_write_config(struct file *filp, struct kobject *kobj,
+ 	loff_t init_off = off;
+ 	u8 *data = (u8 *) buf;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (off > dev->cfg_size)
+ 		return 0;
+ 	if (off + count > dev->cfg_size) {
+@@ -1004,6 +1008,9 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
+ 	resource_size_t start, end;
+ 	int i;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ 		if (res == &pdev->resource[i])
+ 			break;
+@@ -1105,6 +1112,9 @@ static ssize_t pci_write_resource_io(struct file *filp, struct kobject *kobj,
+ 				     struct bin_attribute *attr, char *buf,
+ 				     loff_t off, size_t count)
+ {
++	if (secure_modules())
++		return -EPERM;
++
+ 	return pci_resource_io(filp, kobj, attr, buf, off, count, true);
+ }
+ 
+diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
+index 3f155e78513f..4265ea07e3b0 100644
+--- a/drivers/pci/proc.c
++++ b/drivers/pci/proc.c
+@@ -116,6 +116,9 @@ static ssize_t proc_bus_pci_write(struct file *file, const char __user *buf,
+ 	int size = dev->cfg_size;
+ 	int cnt;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (pos >= size)
+ 		return 0;
+ 	if (nbytes >= size)
+@@ -195,6 +198,9 @@ static long proc_bus_pci_ioctl(struct file *file, unsigned int cmd,
+ #endif /* HAVE_PCI_MMAP */
+ 	int ret = 0;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	switch (cmd) {
+ 	case PCIIOC_CONTROLLER:
+ 		ret = pci_domain_nr(dev->bus);
+@@ -233,7 +239,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
+ 	struct pci_filp_private *fpriv = file->private_data;
+ 	int i, ret;
+ 
+-	if (!capable(CAP_SYS_RAWIO))
++	if (!capable(CAP_SYS_RAWIO) || secure_modules())
+ 		return -EPERM;
+ 
+ 	/* Make sure the caller is mapping a real resource for this device */
+diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
+index b91c4da68365..98f5637304d1 100644
+--- a/drivers/pci/syscall.c
++++ b/drivers/pci/syscall.c
+@@ -10,6 +10,7 @@
+ #include <linux/errno.h>
+ #include <linux/pci.h>
+ #include <linux/syscalls.h>
++#include <linux/module.h>
+ #include <asm/uaccess.h>
+ #include "pci.h"
+ 
+@@ -92,7 +93,7 @@ SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
+ 	u32 dword;
+ 	int err = 0;
+ 
+-	if (!capable(CAP_SYS_ADMIN))
++	if (!capable(CAP_SYS_ADMIN) || secure_modules())
+ 		return -EPERM;
+ 
+ 	dev = pci_get_bus_and_slot(bus, dfn);
+-- 
+2.1.0
+

PatchList.txt

@@ -0,0 +1,52 @@
+**** Backports and patches headed/already upsteram *****************************
+
+* cpupower-Fix-segfault-due-to-incorrect-getopt_long-a.patch (rhbz 1000439)
+  - Queued for next upstream release I believe.  Fixes a segfault in cpupower
+
+* dm-cache-policy-mq_fix-large-scale-table-allocation-bug.patch (rhbz 993744)
+  - Still pending upstream
+
+* ath9k_rx_dma_stop_check.patch (rhbz 892811)
+  - Fixes some DMA issue on specific hardware.  Taken from
+https://dev.openwrt.org/browser/trunk/package/mac80211/patches/552-ath9k_rx_dma_stop_check.patch?rev=34910
+
+* secure-modules.patch
+* modsign-uefi.patch
+* sb-hibernate.patch
+* sysrq-secure-boot.patch
+  - Fedora secure boot support.
+  - Dear Matthew, this is your fault.  Run sed already and get a new set out.
+
+**** Other stuff that should go upstream (in decreasing likelyhood) ************
+
+* defaults-acpi-video.patch
+* disable-i8042-check-on-apple-mac.patch
+* no-pcspkr-modalias.patch
+* die-floppy-die.patch
+	Fedora policy decisions
+	Turn into CONFIG_ options and upstream ?
+
+* input-kill-stupid-messages.patch
+* silence-fbcon-logo.patch
+* silence-noise.patch
+	Fedora local 'hush' patches.  (TODO: push more upstream)
+
+* makefile-after_link.patch
+  Rolandware that is used by the debuginfo generation.
+  Possibly upstreamable ?
+
+* serial-460800.patch
+	Probably not upstreamable.
+	http://marc.theaimsgroup.com/?l=linux-kernel&m=112687270832687&w=2
+	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=126403
+	http://lkml.org/lkml/2006/8/2/208
+
+********************************************************************************
+
+'MUSTARD' patches.  Fedora local patches that are very unlikely to go upstream.
+
+* crash-driver.patch
+	Unlikely to go upstream.
+	https://bugzilla.redhat.com/show_bug.cgi?id=492803
+
+********************************************************************************

Patchlist.changelog

@@ -1,228 +0,0 @@
-https://gitlab.com/cki-project/kernel-ark/-/commit/8773e8c6039ff74d1426cc80de30de759cd0c2a2
- 8773e8c6039ff74d1426cc80de30de759cd0c2a2 irq: export irq_check_status_bit
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e187313e5f0086538fefe0925ef84480f99616d8
- e187313e5f0086538fefe0925ef84480f99616d8 gcc-plugins: fix gcc 11 indigestion with plugins...
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc
- 0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc Fix up bad merge with efi: generalize efi_get_secureboot
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/364788093bdf437c33753d327136c363be8f756c
- 364788093bdf437c33753d327136c363be8f756c Fix up a merge issue with rxe.c
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a4d554ce883e24df77cce42bc2deec527028c213
- a4d554ce883e24df77cce42bc2deec527028c213 Filter out LTO build options from the perl ccopts
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/17b0f7f1d49df30661b517d668715ff5ee1bab09
- 17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e7c009cd91ababdbb5f726ef592c7800f0682d3a
- e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7120b2a26fc4c7954fd0395973dc6739c110e091
- 7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7a28e2fde653a161913abb8eee943cdacb5ff2ae
- 7a28e2fde653a161913abb8eee943cdacb5ff2ae x86: Fix compile issues with rh_check_supported()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/45f64c1a24e73af7987cffec3ea941e29364f87f
- 45f64c1a24e73af7987cffec3ea941e29364f87f e1000e: bump up timeout to wait when ME un-configure ULP mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6c14763b1ce98698949ff45135c15e333aa6416d
- 6c14763b1ce98698949ff45135c15e333aa6416d drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/67a19b16012b12cffba0b515c6503e5f8cdbb798
- 67a19b16012b12cffba0b515c6503e5f8cdbb798 drm: panel: add Xingbangda XBD599 panel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d220dbf98cef820367b5a2a2eeaacebee958bdd4
- d220dbf98cef820367b5a2a2eeaacebee958bdd4 dt-bindings: panel: add binding for Xingbangda XBD599 panel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/80660062260dec4bdca9540922577542c16145e8
- 80660062260dec4bdca9540922577542c16145e8 ARM: fix __get_user_check() in case uaccess_* calls are not inlined
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/24d8743613b2a6a585fc68cfe95078d9a3d5b389
- 24d8743613b2a6a585fc68cfe95078d9a3d5b389 mm/kmemleak: skip late_init if not skip disable
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b697ff5e26974fee8fcd31a1e221e9dd41515efc
- b697ff5e26974fee8fcd31a1e221e9dd41515efc KEYS: Make use of platform keyring for module signature verify
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/081d2185e22479b449586c4e9843602ca0d49806
- 081d2185e22479b449586c4e9843602ca0d49806 Drop that for now
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5ef51389cf6673a0e9e004909c7be1dc785050b2
- 5ef51389cf6673a0e9e004909c7be1dc785050b2 Input: rmi4 - remove the need for artificial IRQ in case of HID
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c1788012ebf8de46e9dc80d18051ed0c77c811b6
- c1788012ebf8de46e9dc80d18051ed0c77c811b6 ARM: tegra: usb no reset
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/577365feaa909db4c0949eabfcda7e4a972b8e54
- 577365feaa909db4c0949eabfcda7e4a972b8e54 arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/331be9c5a436057ee852075c102d9d90a9046a30
- 331be9c5a436057ee852075c102d9d90a9046a30 redhat: rh_kabi: deduplication friendly structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/34d79fbfb327f732ebf3ece4db21a14f81fedf03
- 34d79fbfb327f732ebf3ece4db21a14f81fedf03 redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07
- 93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07 redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/8e5c06356457f5351289e9f687b991189d163dae
- 8e5c06356457f5351289e9f687b991189d163dae redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/212cbccda77cc81fcb60123907eabdac8ad5adb7
- 212cbccda77cc81fcb60123907eabdac8ad5adb7 redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6f7744b412e1fb86a67d8761e64df69cf891b4ad
- 6f7744b412e1fb86a67d8761e64df69cf891b4ad redhat: rh_kabi: Add macros to size and extend structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/049623d33998be30d79692c69b34acb502c496e3
- 049623d33998be30d79692c69b34acb502c496e3 Removing Obsolete hba pci-ids from rhel8
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/43ef1d631ecfe84084db3572c9ed1bedbdceb0f8
- 43ef1d631ecfe84084db3572c9ed1bedbdceb0f8 mptsas: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e5726695109dd1a73da92487b75de6a51d54c015
- e5726695109dd1a73da92487b75de6a51d54c015 mptsas: Taint kernel if mptsas is loaded
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16
- ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16 mptspi: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/bd305f716d8b64be1926bc7aebe02468ac6bf599
- bd305f716d8b64be1926bc7aebe02468ac6bf599 qla2xxx: Remove PCI IDs of deprecated adapter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/803ff9a2c660c094e14d246ef05019bf6008d503
- 803ff9a2c660c094e14d246ef05019bf6008d503 be2iscsi: remove unsupported device IDs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2cb24399321f555f18b0804d3fe02cf53949fba1
- 2cb24399321f555f18b0804d3fe02cf53949fba1 mptspi: Taint kernel if mptspi is loaded
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ad1740551ff4af49f1ef10a130783d9369e955a0
- ad1740551ff4af49f1ef10a130783d9369e955a0 hpsa: remove old cciss-based smartarray pci ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4197ba3e766656eea9175c11ed05903620d98a28
- 4197ba3e766656eea9175c11ed05903620d98a28 qla4xxx: Remove deprecated PCI IDs from RHEL 8
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7e285aec22ab1213639afda877902db363473cb0
- 7e285aec22ab1213639afda877902db363473cb0 aacraid: Remove depreciated device and vendor PCI id's
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/846109a16be92155e69731c36dde48761d375153
- 846109a16be92155e69731c36dde48761d375153 megaraid_sas: remove deprecated pci-ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6fd2019d01cee7ff36dc047d3ecdb504b968f222
- 6fd2019d01cee7ff36dc047d3ecdb504b968f222 mpt*: remove certain deprecated pci-ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/dddcd5c1129b275ff160324036a662739db51fc3
- dddcd5c1129b275ff160324036a662739db51fc3 kernel: add SUPPORT_REMOVED kernel taint
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/08d77161dba915d1ed0d9fede658085440ab4474
- 08d77161dba915d1ed0d9fede658085440ab4474 Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e2dc2ca6a25a445bf22ceb6a8e38e02706605341
- e2dc2ca6a25a445bf22ceb6a8e38e02706605341 Add option of 13 for FORCE_MAX_ZONEORDER
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2384646bf71d8c282cf49bb20321fdf802c61cce
- 2384646bf71d8c282cf49bb20321fdf802c61cce s390: Lock down the kernel when the IPL secure flag is set
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5850c93175b9d2e1081873f4bbe08dead202cb08
- 5850c93175b9d2e1081873f4bbe08dead202cb08 efi: Lock down the kernel if booted in secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/53250b991f841be025fa4d264850dadc0fae2861
- 53250b991f841be025fa4d264850dadc0fae2861 efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/72223fd1241cc5c70b96a491db14d54c83beadd8
- 72223fd1241cc5c70b96a491db14d54c83beadd8 security: lockdown: expose a hook to lock the kernel down
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7ba28f03674fa9346610c3fea7fc93bc58f06d2a
- 7ba28f03674fa9346610c3fea7fc93bc58f06d2a Make get_cert_list() use efi_status_to_str() to print error messages.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2ae9082db0b54d831a9b3782c049d9917e37d89f
- 2ae9082db0b54d831a9b3782c049d9917e37d89f Add efi_status_to_str() and rework efi_status_to_err().
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cee1461ada1b7e4b92cd154e7ec241119afcd644
- cee1461ada1b7e4b92cd154e7ec241119afcd644 Add support for deprecating processors
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2420149f8f5fa9dd1e2dc793765b498022922a81
- 2420149f8f5fa9dd1e2dc793765b498022922a81 arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/1d69b30b98b60aff639351f5788d20a3b17f6e27
- 1d69b30b98b60aff639351f5788d20a3b17f6e27 iommu/arm-smmu: workaround DMA mode issues
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6b2e73e508e7a117b1db91596097c00e5570f64a
- 6b2e73e508e7a117b1db91596097c00e5570f64a rh_kabi: introduce RH_KABI_EXCLUDE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ecb9206bce179eb600c52642a6753012a69ce4a2
- ecb9206bce179eb600c52642a6753012a69ce4a2 ipmi: do not configure ipmi for HPE m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/473be59fe72afa9969cf8d10609ef3f14f594631
- 473be59fe72afa9969cf8d10609ef3f14f594631 IB/rxe: Mark Soft-RoCE Transport driver as tech-preview
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b94117795261f9c074a7addca2252238871b5081
- b94117795261f9c074a7addca2252238871b5081 scsi: smartpqi: add inspur advantech ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cae871558c333880c1687cab6f2a71accf40d105
- cae871558c333880c1687cab6f2a71accf40d105 ice: mark driver as tech-preview
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7d9cb007404211ea6638bde4a28dd0fbe8d95de0
- 7d9cb007404211ea6638bde4a28dd0fbe8d95de0 kABI: Add generic kABI macros to use for kABI workarounds
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/bd353e9aae8877dd490e6c92b67849e0dcfbab25
- bd353e9aae8877dd490e6c92b67849e0dcfbab25 add pci_hw_vendor_status()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/41a259999969bbdfe9f556ce71f2c3c07d7454f4
- 41a259999969bbdfe9f556ce71f2c3c07d7454f4 ahci: thunderx2: Fix for errata that affects stop engine
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2a107343529ce648c11bff62e9f72bbeec738f3f
- 2a107343529ce648c11bff62e9f72bbeec738f3f Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/03e48a48f400a51a182a1254cf22ff0c08706d76
- 03e48a48f400a51a182a1254cf22ff0c08706d76 bpf: Add tech preview taint for syscall
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/607f0e89af7ef5682f79f2eea0a99638a1bc0c4f
- 607f0e89af7ef5682f79f2eea0a99638a1bc0c4f bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/31da227877eb734ddb484bc519aae85ce200802e
- 31da227877eb734ddb484bc519aae85ce200802e add Red Hat-specific taint flags
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7a2e2c83be0230667756cccb5bc3687419dfbb8b
- 7a2e2c83be0230667756cccb5bc3687419dfbb8b kdump: fix a grammar issue in a kernel message
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d345d54d33e7d496c9d845e4723550dd37cb3f88
- d345d54d33e7d496c9d845e4723550dd37cb3f88 tags.sh: Ignore redhat/rpm
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0
- 5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0 put RHEL info into generated headers
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ce12884c009ec3bed11100c9d19f6d97628cf8ae
- ce12884c009ec3bed11100c9d19f6d97628cf8ae kdump: add support for crashkernel=auto
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/18fb1389afccdc5535977a10669b49a37829b55a
- 18fb1389afccdc5535977a10669b49a37829b55a kdump: round up the total memory size to 128M for crashkernel reservation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5fb9821441cc0b77101ad9c0dfaa747957a4cce4
- 5fb9821441cc0b77101ad9c0dfaa747957a4cce4 acpi: prefer booting with ACPI over DTS
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0cf21a40db6fca5d89cf3d65808117c8c14e524e
- 0cf21a40db6fca5d89cf3d65808117c8c14e524e aarch64: acpi scan: Fix regression related to X-Gene UARTs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/de13e14cc2388478d9a2c68c5d90affd92098f11
- de13e14cc2388478d9a2c68c5d90affd92098f11 ACPI / irq: Workaround firmware issue on X-Gene based m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/71c098f4afa38a15a95495c14f71fb087ab27308
- 71c098f4afa38a15a95495c14f71fb087ab27308 modules: add rhelversion MODULE_INFO tag
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/3247f9c838f4aa91aa5d08c152b385d61554d4b5
- 3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e80982feaa68226ff60d2f83dace2016c35270d3
- e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2987f9a606df106f5bdfa4113eb55356a21085a6
- 2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a99885a5e77af594dfdce586cc83e5911d8401ce
- a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cd3a5d30570279538623ea8a1255db0ee4b728f7
- cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile
-

README.rst

@@ -1,25 +0,0 @@
-===================
-The Kernel dist-git
-===================
-
-The kernel is maintained in a `source tree`_ rather than directly in dist-git.
-The specfile is maintained as a `template`_ in the source tree along with a set
-of build scripts to generate configurations, (S)RPMs, and to populate the
-dist-git repository.
-
-The `documentation`_ for the source tree covers how to contribute and maintain
-the tree.
-
-If you're looking for the downstream patch set it's available in the source
-tree with "git log master..ark-patches" or
-`online`_.
-
-Each release in dist-git is tagged in the source repository so you can easily
-check out the source tree for a build. The tags are in the format
-name-version-release, but note release doesn't contain the dist tag since the
-source can be built in different build roots (Fedora, CentOS, etc.)
-
-.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
-.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
-.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
-.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

README.txt

@@ -0,0 +1,82 @@
+
+		Kernel package tips & tricks.
+		~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The kernel is one of the more complicated packages in the distro, and
+for the newcomer, some of the voodoo in the spec file can be somewhat scary.
+This file attempts to document some of the magic.
+
+
+Speeding up make prep
+---------------------
+The kernel is nearly 500MB of source code, and as such, 'make prep'
+takes a while. The spec file employs some trickery so that repeated
+invocations of make prep don't take as long.  Ordinarily the %prep
+phase of a package will delete the tree it is about to untar/patch.
+The kernel %prep keeps around an unpatched version of the tree,
+and makes a symlink tree clone of that clean tree and than applies
+the patches listed in the spec to the symlink tree.
+This makes a huge difference if you're doing multiple make preps a day.
+As an added bonus, doing a diff between the clean tree and the symlink
+tree is slightly faster than it would be doing two proper copies of the tree.
+
+
+build logs.
+-----------
+There's a convenience helper script in scripts/grab-logs.sh
+that will grab the build logs from koji for the kernel version reported
+by make verrel
+
+
+config heirarchy.
+-----------------
+Instead of having to maintain a config file for every arch variant we build on,
+the kernel spec uses a nested system of configs.  At the top level, is
+config-generic. Add options here that should be present in every possible
+config on all architectures.
+
+Beneath this are per-arch overrides. For example config-x86-generic add
+additional x86 specific options, and also _override_ any options that were
+set in config-generic.
+
+The heirarchy looks like this..
+
+                           config-generic
+                                 |
+                         config-x86-generic
+                         |                |
+             config-x86-32-generic   config-x86-64-generic
+
+An option set in a lower level will override the same option set in one
+of the higher levels.
+
+
+There exist two additional overrides, config-debug, and config-nodebug,
+which override -generic, and the per-arch overrides. It is documented
+further below.
+
+
+debug options.
+--------------
+This is a little complicated, as the purpose & meaning of this changes
+depending on where we are in the release cycle.
+If we are building for a current stable release, 'make release' has
+typically been run already, which sets up the following..
+- Two builds occur, a 'kernel' and a 'kernel-debug' flavor.
+- kernel-debug will get various heavyweight debugging options like
+  lockdep etc turned on.
+
+If we are building for rawhide, 'make debug' has been run, which changes
+the status quo to:
+- We only build one kernel 'kernel'
+- The debug options from 'config-debug' are always turned on.
+This is done to increase coverage testing, as not many people actually
+run kernel-debug.
+
+To add new debug options, add an option to _both_ config-debug and config-nodebug,
+and also new stanzas to the Makefile 'debug' and 'release' targets.
+
+Sometimes debug options get added to config-generic, or per-arch overrides
+instead of config-[no]debug. In this instance, the options should have no
+discernable performance impact, otherwise they belong in the debug files.
+

Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch

@@ -0,0 +1,41 @@
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Mar 2012 09:28:15 -0500
+Subject: [PATCH] Restrict /dev/mem and /dev/kmem when module loading is
+ restricted
+
+Allowing users to write to address space makes it possible for the kernel
+to be subverted, avoiding module loading restrictions. Prevent this when
+any restrictions have been imposed on loading modules.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/char/mem.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/char/mem.c b/drivers/char/mem.c
+index fc9637812d78..dde50e5bf527 100644
+--- a/drivers/char/mem.c
++++ b/drivers/char/mem.c
+@@ -167,6 +167,9 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
+ 	if (p != *ppos)
+ 		return -EFBIG;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (!valid_phys_addr_range(p, count))
+ 		return -EFAULT;
+ 
+@@ -505,6 +508,9 @@ static ssize_t write_kmem(struct file *file, const char __user *buf,
+ 	char *kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */
+ 	int err = 0;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (p < (unsigned long) high_memory) {
+ 		unsigned long to_write = min_t(unsigned long, count,
+ 					       (unsigned long)high_memory - p);
+-- 
+2.1.0
+

Revert-Revert-ACPI-video-change-acpi-video-brightnes.patch

@@ -0,0 +1,45 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Mon, 28 Jul 2014 12:59:48 -0400
+Subject: [PATCH] Revert "Revert "ACPI / video: change acpi-video
+ brightness_switch_enabled default to 0""
+
+This reverts commit 2843768b701971ab10e62c77d5c75ad7c306f1bd.
+
+Bugzilla: N/A
+Upstream-status: Sigh.  We almost got to drop this.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ Documentation/kernel-parameters.txt | 2 +-
+ drivers/acpi/video.c                | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
+index 176d4fe4f076..bd374bd2490b 100644
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -3793,7 +3793,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
+ 			the allocated input device; If set to 0, video driver
+ 			will only send out the event without touching backlight
+ 			brightness level.
+-			default: 1
++			default: 0
+ 
+ 	virtio_mmio.device=
+ 			[VMMIO] Memory mapped virtio (platform) device.
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index 3647ce71154c..9dc8ba086596 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -68,7 +68,7 @@ MODULE_AUTHOR("Bruno Ducrot");
+ MODULE_DESCRIPTION("ACPI Video Driver");
+ MODULE_LICENSE("GPL");
+ 
+-static bool brightness_switch_enabled = 1;
++static bool brightness_switch_enabled;
+ module_param(brightness_switch_enabled, bool, 0644);
+ 
+ /*
+-- 
+2.1.0
+

TODO

@@ -0,0 +1,16 @@
+* Post 3.5:
+- Check if PaulMcK has fixed CONFIG_RCU_FAST_NO_HZ
+
+Config TODOs:
+* review & disable a bunch of the I2C, RTC, DVB, SOUND options.
+
+Spec file TODOs:
+
+* modules-extra: Do a few more things to make it a bit more robust.
+  - Allow for comments in the mod-extra.list file.
+  - Don't fail the build if a module is listed but not built (maybe).
+  - See if it can be tied into Kconfig instead of module names.
+
+* investigate gzip modules. Everything should support this now?
+  Looks like about 70M savings per kernel installed.
+

acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch

@@ -0,0 +1,38 @@
+From: Josh Boyer <jwboyer@redhat.com>
+Date: Mon, 25 Jun 2012 19:57:30 -0400
+Subject: [PATCH] acpi: Ignore acpi_rsdp kernel parameter when module loading
+ is restricted
+
+This option allows userspace to pass the RSDP address to the kernel, which
+makes it possible for a user to circumvent any restrictions imposed on
+loading modules. Disable it in that case.
+
+Signed-off-by: Josh Boyer <jwboyer@redhat.com>
+---
+ drivers/acpi/osl.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
+index f9eeae871593..aa1dcf3d0216 100644
+--- a/drivers/acpi/osl.c
++++ b/drivers/acpi/osl.c
+@@ -44,6 +44,7 @@
+ #include <linux/list.h>
+ #include <linux/jiffies.h>
+ #include <linux/semaphore.h>
++#include <linux/module.h>
+ 
+ #include <asm/io.h>
+ #include <asm/uaccess.h>
+@@ -255,7 +256,7 @@ early_param("acpi_rsdp", setup_acpi_rsdp);
+ acpi_physical_address __init acpi_os_get_root_pointer(void)
+ {
+ #ifdef CONFIG_KEXEC
+-	if (acpi_rsdp)
++	if (acpi_rsdp && !secure_modules())
+ 		return acpi_rsdp;
+ #endif
+ 
+-- 
+2.1.0
+

acpi-video-Add-disable_native_backlight-quirk-for-Sa.patch

@@ -0,0 +1,38 @@
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 9 Jan 2015 15:28:29 +0100
+Subject: [PATCH] acpi-video: Add disable_native_backlight quirk for Samsung
+ 730U3E/740U3E
+
+The Samsung 730U3E/740U3E has integrated ATI Radeon graphics, and backlight
+control does not work properly when using the native interfaces.
+
+BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1094948
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/acpi/video.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index 25863442b6ae..5c4e35bebd3b 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -505,7 +505,15 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
+ 		DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"),
+ 		},
+ 	},
+-
++	{
++	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1094948 */
++	 .callback = video_disable_native_backlight,
++	 .ident = "SAMSUNG 730U3E/740U3E",
++	 .matches = {
++		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
++		DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"),
++		},
++	},
+ 	{
+ 	 .callback = video_disable_native_backlight,
+ 	 .ident = "SAMSUNG 870Z5E/880Z5E/680Z5E",
+-- 
+2.1.0
+

acpi-video-Add-force-native-backlight-quirk-for-Leno.patch

@@ -0,0 +1,84 @@
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 3 Mar 2015 08:31:24 +0100
+Subject: [PATCH] acpi: video: Add force native backlight quirk for Lenovo
+ Ideapad Z570
+
+The Lenovo Ideapad Z570 (which is an Acer in disguise like some other Ideapads)
+has a broken acpi_video interface, this was fixed in commmit a11d342fb8
+("ACPI / video: force vendor backlight on Lenovo Ideapad Z570").
+
+Which stops acpi_video from registering a backlight interface, but this is
+only a partial fix, because for people who have the ideapad-laptop module
+installed that module will now register a backlight interface, which also
+does not work, so we need to use the native intel_backlight interface.
+
+The Lenovo Ideapad 570 is a pre-win8 laptop / too old for the acpi-video code
+to automatically prefer the native backlight interface, so add a quirk for it.
+
+This commit also removes the previous incomplete fix.
+
+BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1187004
+Cc: Stepan Bujnak <stepanbujnak@fastmail.fm>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/acpi/video.c        | 17 +++++++++++++++++
+ drivers/acpi/video_detect.c |  8 --------
+ 2 files changed, 17 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index 2f1f16df460c..16d744e4552f 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -425,6 +425,12 @@ static int __init video_disable_native_backlight(const struct dmi_system_id *d)
+ 	return 0;
+ }
+ 
++static int __init video_enable_native_backlight(const struct dmi_system_id *d)
++{
++	use_native_backlight_dmi = NATIVE_BACKLIGHT_ON;
++	return 0;
++}
++
+ static struct dmi_system_id video_dmi_table[] __initdata = {
+ 	/*
+ 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+@@ -556,6 +562,17 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
+ 		DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"),
+ 		},
+ 	},
++
++	/* Non win8 machines which need native backlight nevertheless */
++	{
++	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1187004 */
++	 .callback = video_enable_native_backlight,
++	 .ident = "Lenovo Ideapad Z570",
++	 .matches = {
++		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
++		DMI_MATCH(DMI_PRODUCT_NAME, "102434U"),
++		},
++	},
+ 	{}
+ };
+ 
+diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
+index 27c43499977a..c42feb2bacd0 100644
+--- a/drivers/acpi/video_detect.c
++++ b/drivers/acpi/video_detect.c
+@@ -174,14 +174,6 @@ static struct dmi_system_id video_detect_dmi_table[] = {
+ 		DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5737"),
+ 		},
+ 	},
+-	{
+-	.callback = video_detect_force_vendor,
+-	.ident = "Lenovo IdeaPad Z570",
+-	.matches = {
+-		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+-		DMI_MATCH(DMI_PRODUCT_VERSION, "Ideapad Z570"),
+-		},
+-	},
+ 	{ },
+ };
+ 
+-- 
+2.1.0
+

acpi-video-Allow-forcing-native-backlight-on-non-win.patch

@@ -0,0 +1,76 @@
+From: Aaron Lu <aaron.lu@intel.com>
+Date: Wed, 11 Mar 2015 14:14:56 +0800
+Subject: [PATCH] acpi: video: Allow forcing native backlight on non win8
+ machines
+
+The native backlight behavior (so not registering both the acpi-video
+and the vendor backlight driver) can be useful on some non win8 machines
+too, so change the behavior of the video.use_native_backlight=1 or 0
+kernel cmdline option to be: if user has set video.use_native_backlight=1
+or 0, use that no matter if it is a win8 system or not. Also, we will
+put some known systems into the DMI table to make them either use native
+backlight interface or not, and the use_native_backlight_dmi is used to
+reflect that.
+
+Original-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Aaron Lu <aaron.lu@intel.com>
+Acked-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/acpi/video.c | 19 +++++++++++++------
+ 1 file changed, 13 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index 497622ce5c31..2f1f16df460c 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -82,9 +82,15 @@ module_param(allow_duplicates, bool, 0644);
+  * For Windows 8 systems: used to decide if video module
+  * should skip registering backlight interface of its own.
+  */
+-static int use_native_backlight_param = -1;
++enum {
++	NATIVE_BACKLIGHT_NOT_SET = -1,
++	NATIVE_BACKLIGHT_OFF,
++	NATIVE_BACKLIGHT_ON,
++};
++
++static int use_native_backlight_param = NATIVE_BACKLIGHT_NOT_SET;
+ module_param_named(use_native_backlight, use_native_backlight_param, int, 0444);
+-static bool use_native_backlight_dmi = true;
++static int use_native_backlight_dmi = NATIVE_BACKLIGHT_NOT_SET;
+ 
+ static int register_count;
+ static struct mutex video_list_lock;
+@@ -237,15 +243,16 @@ static void acpi_video_switch_brightness(struct work_struct *work);
+ 
+ static bool acpi_video_use_native_backlight(void)
+ {
+-	if (use_native_backlight_param != -1)
++	if (use_native_backlight_param != NATIVE_BACKLIGHT_NOT_SET)
+ 		return use_native_backlight_param;
+-	else
++	else if (use_native_backlight_dmi != NATIVE_BACKLIGHT_NOT_SET)
+ 		return use_native_backlight_dmi;
++	return acpi_osi_is_win8();
+ }
+ 
+ bool acpi_video_verify_backlight_support(void)
+ {
+-	if (acpi_osi_is_win8() && acpi_video_use_native_backlight() &&
++	if (acpi_video_use_native_backlight() &&
+ 	    backlight_device_registered(BACKLIGHT_RAW))
+ 		return false;
+ 	return acpi_video_backlight_support();
+@@ -414,7 +421,7 @@ static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+ 
+ static int __init video_disable_native_backlight(const struct dmi_system_id *d)
+ {
+-	use_native_backlight_dmi = false;
++	use_native_backlight_dmi = NATIVE_BACKLIGHT_OFF;
+ 	return 0;
+ }
+ 
+-- 
+2.1.0
+

acpi-video-add-disable_native_backlight_quirk_for_samsung_510r.patch

@@ -0,0 +1,39 @@
+From b29c0d36da67a64f5de1fe167c0b807815aa1da4 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 4 Feb 2015 14:44:51 +0100
+Subject: [PATCH 2/2] acpi-video: Add disable_native_backlight quirk for
+ Samsung 510R
+
+Backlight control through the native intel interface does not work properly
+on the Samsung 510R, where as using the acpi_video interface does work, add
+a quirk for this.
+
+BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1186097
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/acpi/video.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index 497d986..88a4f99 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -523,6 +523,15 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
+ 		},
+ 	},
+ 	{
++	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1186097 */
++	 .callback = video_disable_native_backlight,
++	 .ident = "SAMSUNG 3570R/370R/470R/450R/510R/4450RV",
++	 .matches = {
++		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
++		DMI_MATCH(DMI_PRODUCT_NAME, "3570R/370R/470R/450R/510R/4450RV"),
++		},
++	},
++	{
+ 	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1094948 */
+ 	 .callback = video_disable_native_backlight,
+ 	 .ident = "SAMSUNG 730U3E/740U3E",
+-- 
+2.1.0
+

arm-dts-am335x-bone-common-add-uart2_pins-uart4_pins.patch

@@ -0,0 +1,45 @@
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Thu, 13 Mar 2014 14:18:52 -0500
+Subject: [PATCH] arm: dts: am335x-bone-common: add
+ uart2_pins/uart4_pins/uart5_pins
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ arch/arm/boot/dts/am335x-bone-common.dtsi | 21 +++++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
+index db880bf46135..c931ec7201c0 100644
+--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
++++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
+@@ -102,6 +102,27 @@
+ 		>;
+ 	};
+ 
++	uart2_pins: pinmux_uart2_pins {
++		pinctrl-single,pins = <
++			0x150 0x21	/* spi0_sclk.uart2_rxd | MODE1 */
++			0x154 0x01	/* spi0_d0.uart2_txd | MODE1 */
++		>;
++	};
++
++	uart4_pins: pinmux_uart4_pins {
++		pinctrl-single,pins = <
++			0x070 0x26	/* gpmc_wait0.uart4_rxd | MODE6 */
++			0x074 0x06	/* gpmc_wpn.uart4_txd | MODE6 */
++		>;
++	};
++
++	uart5_pins: pinmux_uart5_pins {
++		pinctrl-single,pins = <
++			0x0C4 0x24	/* lcd_data9.uart5_rxd | MODE4 */
++			0x0C0 0x04	/* lcd_data8.uart5_txd | MODE4 */
++		>;
++	};
++
+ 	clkout2_pin: pinmux_clkout2_pin {
+ 		pinctrl-single,pins = <
+ 			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+-- 
+2.1.0
+

arm-dts-am335x-bone-common-enable-and-use-i2c2.patch

@@ -0,0 +1,69 @@
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Tue, 31 Dec 2013 11:17:45 -0600
+Subject: [PATCH] arm: dts: am335x-bone-common: enable and use i2c2
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ arch/arm/boot/dts/am335x-bone-common.dtsi | 39 +++++++++++++++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
+index 2c6248d9a9ef..ec755eeb78ee 100644
+--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
++++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
+@@ -81,6 +81,13 @@
+ 		>;
+ 	};
+ 
++	i2c2_pins: pinmux_i2c2_pins {
++		pinctrl-single,pins = <
++			0x178 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */
++			0x17c 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */
++		>;
++	};
++
+ 	uart0_pins: pinmux_uart0_pins {
+ 		pinctrl-single,pins = <
+ 			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+@@ -218,6 +225,38 @@
+ 		reg = <0x24>;
+ 	};
+ 
++	baseboard_eeprom: baseboard_eeprom@50 {
++		compatible = "at,24c256";
++		reg = <0x50>;
++	};
++};
++
++&i2c2 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c2_pins>;
++
++	clock-frequency = <100000>;
++
++	cape_eeprom0: cape_eeprom0@54 {
++		compatible = "at,24c256";
++		reg = <0x54>;
++	};
++
++	cape_eeprom1: cape_eeprom1@55 {
++		compatible = "at,24c256";
++		reg = <0x55>;
++	};
++
++	cape_eeprom2: cape_eeprom2@56 {
++		compatible = "at,24c256";
++		reg = <0x56>;
++	};
++
++	cape_eeprom3: cape_eeprom3@57 {
++		compatible = "at,24c256";
++		reg = <0x57>;
++	};
+ };
+ 
+ /include/ "tps65217.dtsi"
+-- 
+2.1.0
+

arm-dts-am335x-bone-common-setup-default-pinmux-http.patch

@@ -0,0 +1,179 @@
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Tue, 31 Dec 2013 14:18:00 -0600
+Subject: [PATCH] arm: dts: am335x-bone-common: setup default pinmux
+ http://elinux.org/Basic_Proto_Cape
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ arch/arm/boot/dts/am335x-bone-common.dtsi | 130 ++++++++++++++++++++++++++++++
+ 1 file changed, 130 insertions(+)
+
+diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
+index ec755eeb78ee..db880bf46135 100644
+--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
++++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
+@@ -95,6 +95,13 @@
+ 		>;
+ 	};
+ 
++	uart1_pins: pinmux_uart1_pins {
++		pinctrl-single,pins = <
++			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
++			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
++		>;
++	};
++
+ 	clkout2_pin: pinmux_clkout2_pin {
+ 		pinctrl-single,pins = <
+ 			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+@@ -175,6 +182,33 @@
+ 			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ 		>;
+ 	};
++
++	spi0_pins: pinmux_spi0_pins {
++		pinctrl-single,pins = <
++			0x150 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_sclk.spi0_sclk */
++			0x154 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d0.spi0_d0 */
++			0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
++			0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
++		>;
++	};
++
++	ehrpwm1_pin_p9_14: pinmux_ehrpwm1_pin_p9_14 {
++		pinctrl-single,pins = <
++			0x048 0x6	/* P9_14 (ZCZ ball U14) | MODE 6 */
++		>;
++	};
++
++	ehrpwm1_pin_p9_16: pinmux_ehrpwm1_pin_p9_16 {
++		pinctrl-single,pins = <
++			0x04c 0x6	/* P9_16 (ZCZ ball T14) | MODE 6 */
++		>;
++	};
++
++	ecap0_pin_p9_42: pinmux_ecap0_pin_p9_42 {
++		pinctrl-single,pins = <
++			0x164 0x0	/* P9_42 (ZCZ ball C18) | MODE 0 */
++		>;
++	};
+ };
+ 
+ &uart0 {
+@@ -184,6 +218,13 @@
+ 	status = "okay";
+ };
+ 
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++
++	status = "okay";
++};
++
+ &usb {
+ 	status = "okay";
+ };
+@@ -259,6 +300,56 @@
+ 	};
+ };
+ 
++&epwmss0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&ecap0_pin_p9_42>;
++	status = "okay";
++
++	ecap@48300100 {
++		status = "okay";
++	};
++};
++
++&epwmss1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <
++		&ehrpwm1_pin_p9_14
++		&ehrpwm1_pin_p9_16
++	>;
++
++	status = "okay";
++
++	ehrpwm@48302200 {
++		status = "okay";
++	};
++};
++
++&spi0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi0_pins>;
++	status = "okay";
++
++	spidev0: spi@0 {
++		compatible = "spidev";
++		reg = <0>;
++		spi-max-frequency = <16000000>;
++		spi-cpha;
++	};
++
++	spidev1: spi@1 {
++		compatible = "spidev";
++		reg = <1>;
++		spi-max-frequency = <16000000>;
++	};
++};
++
++&tscadc {
++	status = "okay";
++	adc {
++		ti,adc-channels = <4 5 6>;
++	};
++};
++
+ /include/ "tps65217.dtsi"
+ 
+ &tps {
+@@ -340,3 +431,42 @@
+ 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ 	cd-inverted;
+ };
++
++/ {
++	ocp {
++		//FIXME: these pwm's still need work, this guild isn't working..
++		//http://elinux.org/EBC_Exercise_13_Pulse_Width_Modulation
++		pwm_test_P9_14@0 {
++			compatible = "pwm_test";
++			pwms = <&ehrpwm1 0 500000 1>;
++			pwm-names = "PWM_P9_14";
++			pinctrl-names = "default";
++			pinctrl-0 = <&ehrpwm1_pin_p9_14>;
++			enabled = <1>;
++			duty = <0>;
++			status = "okay";
++		};
++
++		pwm_test_P9_16@0 {
++			compatible = "pwm_test";
++			pwms = <&ehrpwm1 0 500000 1>;
++			pwm-names = "PWM_P9_16";
++			pinctrl-names = "default";
++			pinctrl-0 = <&ehrpwm1_pin_p9_16>;
++			enabled = <1>;
++			duty = <0>;
++			status = "okay";
++		};
++
++		pwm_test_P9_42 {
++			compatible = "pwm_test";
++			pwms = <&ecap0 0 500000 1>;
++			pwm-names = "PWM_P9_42";
++			pinctrl-names = "default";
++			pinctrl-0 = <&ecap0_pin_p9_42>;
++			enabled = <1>;
++			duty = <0>;
++			status = "okay";
++		};
++	};
++};
+-- 
+2.1.0
+

arm-dts-am335x-boneblack-add-cpu0-opp-points.patch

@@ -0,0 +1,41 @@
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Fri, 27 Dec 2013 13:14:19 -0600
+Subject: [PATCH] arm: dts: am335x-boneblack: add cpu0 opp points
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ arch/arm/boot/dts/am335x-boneblack.dts | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
+index 0fd89c38cf02..20660917a06f 100644
+--- a/arch/arm/boot/dts/am335x-boneblack.dts
++++ b/arch/arm/boot/dts/am335x-boneblack.dts
+@@ -71,6 +71,24 @@
+ };
+ 
+ / {
++	cpus {
++		cpu@0 {
++			cpu0-supply = <&dcdc2_reg>;
++			/*
++			 * To consider voltage drop between PMIC and SoC,
++			 * tolerance value is reduced to 2% from 4% and
++			 * voltage value is increased as a precaution.
++			 */
++			operating-points = <
++				/* kHz    uV */
++				1000000	1325000
++				800000	1300000
++				600000  1112000
++				300000   969000
++			>;
++		};
++	};
++
+ 	hdmi {
+ 		compatible = "ti,tilcdc,slave";
+ 		i2c = <&i2c0>;
+-- 
+2.1.0
+

arm-dts-am335x-boneblack-lcdc-add-panel-info.patch

@@ -0,0 +1,39 @@
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Fri, 27 Dec 2013 13:05:09 -0600
+Subject: [PATCH] arm: dts: am335x-boneblack: lcdc add panel-info
+
+Bugzilla: 1012025
+Upstream-status: In beagle github repository https://github.com/beagleboard/kernel
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ arch/arm/boot/dts/am335x-boneblack.dts | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
+index 5c42d259fa68..0fd89c38cf02 100644
+--- a/arch/arm/boot/dts/am335x-boneblack.dts
++++ b/arch/arm/boot/dts/am335x-boneblack.dts
+@@ -78,6 +78,19 @@
+ 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+ 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+ 		status = "okay";
++
++		panel-info {
++			bpp = <16>;
++			ac-bias = <255>;
++			ac-bias-intrpt = <0>;
++			dma-burst-sz = <16>;
++			fdd = <16>;
++			sync-edge = <1>;
++			sync-ctrl = <1>;
++			raster-order = <0>;
++			fifo-th = <0>;
++			invert-pxl-clk;
++		};
+ 	};
+ };
+ 
+-- 
+2.1.0
+

arm-highbank-l2-reverts.patch

@@ -0,0 +1,60 @@
+From: Kyle McMartin <kmcmartin@redhat.com>
+Date: Tue, 30 Sep 2014 16:19:47 -0400
+Subject: [PATCH] arm: highbank l2 reverts
+
+Revert some v3.16 changes to mach-highbank which broke L2 cache enablement.
+Will debug upstream separately, but we need F22/21 running there. (#1139762)
+---
+ arch/arm/mach-highbank/highbank.c | 21 ++++++++++++---------
+ 1 file changed, 12 insertions(+), 9 deletions(-)
+
+diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
+index 07a09570175d..5db6d14fcd67 100644
+--- a/arch/arm/mach-highbank/highbank.c
++++ b/arch/arm/mach-highbank/highbank.c
+@@ -51,13 +51,11 @@ static void __init highbank_scu_map_io(void)
+ }
+ 
+ 
+-static void highbank_l2c310_write_sec(unsigned long val, unsigned reg)
++static void highbank_l2x0_disable(void)
+ {
+-	if (reg == L2X0_CTRL)
+-		highbank_smc1(0x102, val);
+-	else
+-		WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n",
+-			  reg);
++	outer_flush_all();
++	/* Disable PL310 L2 Cache controller */
++	highbank_smc1(0x102, 0x0);
+ }
+ 
+ static void __init highbank_init_irq(void)
+@@ -66,6 +64,14 @@ static void __init highbank_init_irq(void)
+ 
+ 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
+ 		highbank_scu_map_io();
++
++	/* Enable PL310 L2 Cache controller */
++	if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
++	    of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
++		highbank_smc1(0x102, 0x1);
++		l2x0_of_init(0, ~0);
++		outer_cache.disable = highbank_l2x0_disable;
++	}
+ }
+ 
+ static void highbank_power_off(void)
+@@ -179,9 +185,6 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
+ #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ 	.dma_zone_size	= (4ULL * SZ_1G),
+ #endif
+-	.l2c_aux_val	= 0,
+-	.l2c_aux_mask	= ~0,
+-	.l2c_write_sec	= highbank_l2c310_write_sec,
+ 	.init_irq	= highbank_init_irq,
+ 	.init_machine	= highbank_init,
+ 	.dt_compat	= highbank_match,
+-- 
+2.1.0
+

arm-i.MX6-Utilite-device-dtb.patch

@@ -0,0 +1,65 @@
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Fri, 11 Jul 2014 00:10:56 +0100
+Subject: [PATCH] arm: i.MX6 Utilite device dtb
+
+---
+ arch/arm/boot/dts/imx6q-cm-fx6.dts | 38 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
+index 99b46f8030ad..8b6ddd16dcc5 100644
+--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
++++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
+@@ -97,11 +97,49 @@
+ 				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+ 			>;
+ 		};
++
++		pinctrl_usdhc1: usdhc1grp {
++			fsl,pins = <
++				MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17059
++				MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10059
++				MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17059
++				MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17059
++				MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17059
++				MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17059
++			>;
++		};
++
++		pinctrl_usdhc3: usdhc3grp {
++			fsl,pins = <
++				MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
++				MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
++				MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
++				MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
++				MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
++				MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
++			>;
++		};
+ 	};
+ };
+ 
++&sata {
++	status = "okay";
++};
++
+ &uart4 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pinctrl_uart4>;
+ 	status = "okay";
+ };
++
++&usdhc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_usdhc1>;
++	status = "okay";
++};
++
++&usdhc3 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_usdhc3>;
++	status = "okay";
++};
+-- 
+2.1.0
+

asus-wmi-Restrict-debugfs-interface-when-module-load.patch

@@ -0,0 +1,53 @@
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Mar 2012 08:46:50 -0500
+Subject: [PATCH] asus-wmi: Restrict debugfs interface when module loading is
+ restricted
+
+We have no way of validating what all of the Asus WMI methods do on a
+given machine, and there's a risk that some will allow hardware state to
+be manipulated in such a way that arbitrary code can be executed in the
+kernel, circumventing module loading restrictions. Prevent that if any of
+these features are enabled.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/platform/x86/asus-wmi.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
+index 7543a56e0f45..93b5a6998371 100644
+--- a/drivers/platform/x86/asus-wmi.c
++++ b/drivers/platform/x86/asus-wmi.c
+@@ -1589,6 +1589,9 @@ static int show_dsts(struct seq_file *m, void *data)
+ 	int err;
+ 	u32 retval = -1;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	err = asus_wmi_get_devstate(asus, asus->debug.dev_id, &retval);
+ 
+ 	if (err < 0)
+@@ -1605,6 +1608,9 @@ static int show_devs(struct seq_file *m, void *data)
+ 	int err;
+ 	u32 retval = -1;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	err = asus_wmi_set_devstate(asus->debug.dev_id, asus->debug.ctrl_param,
+ 				    &retval);
+ 
+@@ -1629,6 +1635,9 @@ static int show_call(struct seq_file *m, void *data)
+ 	union acpi_object *obj;
+ 	acpi_status status;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID,
+ 				     1, asus->debug.method_id,
+ 				     &input, &output);
+-- 
+2.1.0
+

ath9k-rx-dma-stop-check.patch

@@ -0,0 +1,41 @@
+From: "kernel-team@fedoraproject.org" <kernel-team@fedoraproject.org>
+Date: Wed, 6 Feb 2013 09:57:47 -0500
+Subject: [PATCH] ath9k: rx dma stop check
+
+---
+ drivers/net/wireless/ath/ath9k/mac.c | 12 +++++++++++-
+ 1 file changed, 11 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
+index 3e58bfa0c1fd..406eea47256e 100644
+--- a/drivers/net/wireless/ath/ath9k/mac.c
++++ b/drivers/net/wireless/ath/ath9k/mac.c
+@@ -693,7 +693,7 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
+ {
+ #define AH_RX_STOP_DMA_TIMEOUT 10000   /* usec */
+ 	struct ath_common *common = ath9k_hw_common(ah);
+-	u32 mac_status, last_mac_status = 0;
++	u32 mac_status = 0, last_mac_status = 0;
+ 	int i;
+ 
+ 	/* Enable access to the DMA observation bus */
+@@ -723,6 +723,16 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
+ 	}
+ 
+ 	if (i == 0) {
++		if (!AR_SREV_9300_20_OR_LATER(ah) &&
++		    (mac_status & 0x700) == 0) {
++			/*
++			 * DMA is idle but the MAC is still stuck
++			 * processing events
++			 */
++			*reset = true;
++			return true;
++		}
++
+ 		ath_err(common,
+ 			"DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x DMADBG_7=0x%08x\n",
+ 			AH_RX_STOP_DMA_TIMEOUT / 1000,
+-- 
+2.1.0
+

check-kabi

@@ -1,149 +0,0 @@
-#!/usr/bin/python3
-#
-# check-kabi - Red Hat kABI reference checking tool
-#
-# We use this script to check against reference Module.kabi files.
-#
-# Author: Jon Masters <jcm@redhat.com>
-# Copyright (C) 2007-2009 Red Hat, Inc.
-#
-# This software may be freely redistributed under the terms of the GNU
-# General Public License (GPL).
-
-# Changelog:
-#
-# 2018/06/01 - Update for python3 by Petr Oros.
-# 2009/08/15 - Updated for use in RHEL6.
-# 2007/06/13 - Initial rewrite in python by Jon Masters.
-
-__author__ = "Jon Masters <jcm@redhat.com>"
-__version__ = "2.0"
-__date__ = "2009/08/15"
-__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
-__license__ = "GPL"
-
-import getopt
-import string
-import sys
-
-true = 1
-false = 0
-
-
-def load_symvers(symvers, filename):
-    """Load a Module.symvers file."""
-
-    symvers_file = open(filename, "r")
-
-    while true:
-        in_line = symvers_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type = in_line.split()
-
-        symvers[symbol] = in_line[0:-1]
-
-
-def load_kabi(kabi, filename):
-    """Load a Module.kabi file."""
-
-    kabi_file = open(filename, "r")
-
-    while true:
-        in_line = kabi_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type = in_line.split()
-
-        kabi[symbol] = in_line[0:-1]
-
-
-def check_kabi(symvers, kabi):
-    """Check Module.kabi and Module.symvers files."""
-
-    fail = 0
-    warn = 0
-    changed_symbols = []
-    moved_symbols = []
-
-    for symbol in kabi:
-        abi_hash, abi_sym, abi_dir, abi_type = kabi[symbol].split()
-        if symbol in symvers:
-            sym_hash, sym_sym, sym_dir, sym_type = symvers[symbol].split()
-            if abi_hash != sym_hash:
-                fail = 1
-                changed_symbols.append(symbol)
-
-            if abi_dir != sym_dir:
-                warn = 1
-                moved_symbols.append(symbol)
-        else:
-            fail = 1
-            changed_symbols.append(symbol)
-
-    if fail:
-        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
-        print("")
-        print("The following symbols have been changed (this will cause an ABI breakage):")
-        print("")
-        for symbol in changed_symbols:
-            print(symbol)
-        print("")
-
-    if warn:
-        print("*** WARNING - ABI SYMBOLS MOVED ***")
-        print("")
-        print("The following symbols moved (typically caused by moving a symbol from being")
-        print("provided by the kernel vmlinux out to a loadable module):")
-        print("")
-        for symbol in moved_symbols:
-            print(symbol)
-        print("")
-
-    """Halt the build, if we got errors and/or warnings. In either case,
-       double-checkig is required to avoid introducing / concealing
-       KABI inconsistencies."""
-    if fail or warn:
-        sys.exit(1)
-    sys.exit(0)
-
-
-def usage():
-    print("""
-check-kabi: check Module.kabi and Module.symvers files.
-
-    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
-
-""")
-
-
-if __name__ == "__main__":
-
-    symvers_file = ""
-    kabi_file = ""
-
-    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
-
-    for o, v in opts:
-        if o == "-s":
-            symvers_file = v
-        if o == "-h":
-            usage()
-            sys.exit(0)
-        if o == "-k":
-            kabi_file = v
-
-    if (symvers_file == "") or (kabi_file == ""):
-        usage()
-        sys.exit(1)
-
-    symvers = {}
-    kabi = {}
-
-    load_symvers(symvers, symvers_file)
-    load_kabi(kabi, kabi_file)
-    check_kabi(symvers, kabi)

compile-fixes.patch

@@ -0,0 +1,6 @@
+#
+# Small compile fixes (For more involved fixes, please use a separate patch).
+#
+# Please add the errors from gcc before the diffs to save others having
+# to do a compile to figure out what your diff is fixing. Thanks.
+#

config-arm-generic

@@ -0,0 +1,284 @@
+CONFIG_KUSER_HELPERS=y
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
+CONFIG_FB_SSD1307=m
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_NFS_FS=y
+
+CONFIG_CRASH=m
+CONFIG_CC_STACKPROTECTOR=y
+
+# CONFIG_PID_IN_CONTEXTIDR is not set
+
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_BIG_LITTLE is not set
+# CONFIG_IWMMXT is not set
+
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_FSL_FTM is not set
+
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_GPIO=y
+
+CONFIG_RCU_FANOUT_LEAF=16
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_ARM_SP805_WATCHDOG=m
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_NR_CPUS=8
+
+CONFIG_SWIOTLB=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_FB_SIMPLE=y
+
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+
+# ARM AMBA generic HW
+CONFIG_ARM_AMBA=y
+# CONFIG_TEGRA_AHB is not set
+CONFIG_ARM_CCI=y
+CONFIG_ARM_CCN=y
+CONFIG_ARM_DMA_USE_IOMMU=y
+CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_KVM_ARM_VGIC=y
+CONFIG_ARM_GLOBAL_TIMER=y
+CONFIG_ARM_SMMU=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_OC_ETM=y
+CONFIG_FB_ARMCLCD=y
+
+# ARM VExpress
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_VEXPRESS_SYSCFG=y
+CONFIG_COMMON_CLK_VERSATILE=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_VEXPRESS_OSC=y
+CONFIG_I2C_VERSATILE=m
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_REGULATOR_VEXPRESS=m
+CONFIG_SENSORS_VEXPRESS=m
+CONFIG_CLKSRC_VERSATILE=y
+CONFIG_POWER_RESET_VERSATILE=y
+# CONFIG_ARM_CHARLCD is not set
+
+# Power/Thermal/Cpufreq
+# CONFIG_ARM_DT_BL_CPUFREQ is not set
+# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
+
+# Device tree
+CONFIG_DTC=y
+CONFIG_DMA_OF=y
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IOMMU=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_PCI_IRQ=m
+CONFIG_OF_PCI=m
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PATA_OF_PLATFORM=m
+# CONFIG_OF_SELFTEST is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_THERMAL_OF=y
+
+# CONFIG_OF_MDIO is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+
+# USB
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_XHCI_PLATFORM=m
+
+# External Connectors
+CONFIG_EXTCON=m
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ADC_JACK=m
+# CONFIG_EXTCON_SM5502 is not set
+# CONFIG_EXTCON_RT8973A is not set
+
+# MTD
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_OF_PARTS=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_OF=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_LPDDR2_NVM is not set
+
+# GPIO
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_WATCHDOG=m
+CONFIG_GPIOLIB=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_BACKLIGHT_GPIO=m
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_RESTART=y
+# CONFIG_GPIO_74XX_MMIO is not set
+
+#i2c
+CONFIG_I2C_ARB_GPIO_CHALLENGE=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_MUX=m
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PINCTRL=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+
+# spi
+CONFIG_SPI_PL022=m
+
+# Sensors
+CONFIG_SENSORS_IIO_HWMON=m
+CONFIG_IIO_SYSFS_TRIGGER=m
+
+# PHY framework
+CONFIG_GENERIC_PHY=y
+
+# MFD
+CONFIG_MFD_CORE=m
+
+CONFIG_SMC91X=m
+CONFIG_SMC911X=m
+
+CONFIG_CPU_THERMAL=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+
+# Contiguous Memory Allocator
+CONFIG_CMA=y
+CONFIG_DMA_CMA=y
+# CONFIG_CMA_DEBUG is not set
+CONFIG_CMA_SIZE_MBYTES=16
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+# CONFIG_XEN is not set
+# CONFIG_DRM_RCAR_DU is not set
+# CONFIG_I2C_RCAR is not set
+# CONFIG_DRM_SHMOBILE is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+# CONFIG_LOCK_STAT is not set
+
+# CONFIG_CADENCE_WATCHDOG is not set
+
+# CONFIG_DRM_ARMADA is not set
+# CONFIG_DRM_TEGRA is not set
+# CONFIG_SHMOBILE_IOMMU is not set
+
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_QCOM is not set
+
+# CONFIG_ARM_PTDUMP is not set
+
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_PHY_SAMSUNG_USB2 is not set
+
+### turn off things which make no sense on embedded SoC
+
+# core
+
+# CONFIG_INFINIBAND is not set
+# CONFIG_ISDN is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PARPORT is not set
+# CONFIG_FIREWIRE is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ISDN is not set
+# CONFIG_GAMEPORT is not set
+# CONFIG_AGP is not set
+
+# netdrv
+
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XIRCOM is not set
+
+# scsi
+
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+
+# serial
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+
+# drm
+# CONFIG_DRM_VMWGFX is not set
+# CONFIG_IMX_IPUV3_CORE is not set
+
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_CORESIGHT is not set
+
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+# CONFIG_BMP085_SPI is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_SPI_ROCKCHIP is not set

config-arm64

@@ -0,0 +1,155 @@
+CONFIG_64BIT=y
+CONFIG_ARM64=y
+
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_SMT=y
+
+# CONFIG_CPU_BIG_ENDIAN is not set
+
+# arm64 only SoCs
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_SEATTLE=y
+# CONFIG_ARCH_THUNDER is not set
+
+# Erratum
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+
+# CONFIG_AMBA_PL08X is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARM64_64K_PAGES=y
+# CONFIG_COMPAT is not set
+
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_BRCMUTIL=m
+CONFIG_BUG=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CMDLINE="console=ttyAMA0"
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_HAVE_NET_DSA=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HVC_DRIVER=y
+CONFIG_HZ=100
+
+CONFIG_KVM=y
+CONFIG_KVM_ARM_MAX_VCPUS=8
+
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_NFS_DEBUG=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_PL330_DMA is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RTC_DRV_PL030 is not set
+CONFIG_RTC_DRV_PL031=y
+CONFIG_SERIAL_8250_DMA=y
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_THERMAL is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_VM_EVENT_COUNTERS=y
+
+CONFIG_EFI=y
+CONFIG_EFI_VARS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_EFI_VARS_PSTORE=y
+CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
+CONFIG_RTC_DRV_EFI=y
+
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=m
+CONFIG_CRYPTO_SHA2_ARM64_CE=m
+CONFIG_CRYPTO_GHASH_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=m
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=m
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
+CONFIG_CRYPTO_CRC32_ARM64=m
+CONFIG_CRYPTO_DEV_CCP=y
+CONFIG_CRYPTO_DEV_CCP_DD=m
+CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
+
+CONFIG_ARM64_CPUIDLE=y
+
+# APM Xgene
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_COMMON_CLK_XGENE=y
+
+CONFIG_AHCI_XGENE=y
+CONFIG_PHY_XGENE=y
+CONFIG_NET_XGENE=y
+CONFIG_RTC_DRV_XGENE=m
+CONFIG_HW_RANDOM_XGENE=m
+CONFIG_GPIO_XGENE=y
+
+# busted build for various reasons
+#  uses pci_* for some reason to allocate DMA buffers
+# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
+#  weird include chain resulting in missing u64 type
+# CONFIG_USB_SPEEDTOUCH is not set
+#  dma issues in headers
+# CONFIG_PARPORT_PC is not set
+# CONFIG_VGA_CONSOLE is not set
+
+CONFIG_PCI_XGENE=y
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+CONFIG_SBSAUART_TTY=y
+CONFIG_I2C_SCMI=m
+CONFIG_SENSORS_ACPI_POWER=m
+
+CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_IPMI=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+
+CONFIG_NET_SB1000=y
+CONFIG_AMD_XGBE=m
+CONFIG_AMD_XGBE_PHY=m
+# CONFIG_AMD_XGBE_DCB is not set
+
+# CONFIG_IMX_THERMAL is not set
+# CONFIG_MMC_DW is not set
+
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+
+CONFIG_SATA_AHCI_PLATFORM=y
+
+# CONFIG_SND_SOC is not set
+
+# CONFIG_PMIC_OPREGION is not set

config-armv7

@@ -0,0 +1,655 @@
+# ARM unified arch kernel
+
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_KEYSTONE is not set
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_ARCH_PICOXCELL=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_U8500=y
+CONFIG_ARCH_ZYNQ=y
+
+# These are supported in the LPAE kernel
+# CONFIG_ARM_LPAE is not set
+# CONFIG_XEN is not set
+# CONFIG_ARM_VIRT_EXT is not set
+# CONFIG_VIRTUALIZATION is not set
+
+# mvebu
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_375=y
+CONFIG_MACH_ARMADA_38X=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_MACH_DOVE=y
+
+CONFIG_MVEBU_DEVBUS=y
+CONFIG_PCI_MVEBU=y
+CONFIG_CACHE_TAUROS2=y
+CONFIG_MV_XOR=y
+CONFIG_CRYPTO_DEV_MV_CESA=m
+CONFIG_MV643XX_ETH=m
+CONFIG_PINCTRL_MVEBU=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
+# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
+CONFIG_PINCTRL_DOVE=y
+CONFIG_EDAC_MV64X60=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_88PM80X=m
+CONFIG_RTC_DRV_ISL12057=m
+CONFIG_RTC_DRV_MV=m
+CONFIG_MVNETA=m
+CONFIG_GPIO_MVEBU=y
+CONFIG_MVEBU_CLK_CORE=y
+CONFIG_MVEBU_CLK_COREDIV=y
+CONFIG_MMC_MVSDIO=m
+CONFIG_MMC_SDHCI_DOVE=m
+CONFIG_SPI_ORION=m
+CONFIG_USB_MV_UDC=m
+CONFIG_MVEBU_MBUS=y
+CONFIG_USB_XHCI_MVEBU=m
+CONFIG_PHY_MVEBU_SATA=y
+CONFIG_AHCI_MVEBU=m
+CONFIG_ARMADA_THERMAL=m
+CONFIG_DOVE_THERMAL=m
+CONFIG_DRM_ARMADA=m
+CONFIG_ORION_WATCHDOG=m
+CONFIG_SND_KIRKWOOD_SOC=m
+CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
+CONFIG_USB_EHCI_HCD_ORION=m
+CONFIG_MMC_SDHCI_PXAV3=m
+CONFIG_MVPP2=m
+CONFIG_COMMON_CLK_SI5351=m
+# CONFIG_CACHE_FEROCEON_L2 is not set
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+
+# omap 
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+CONFIG_SOC_OMAP5=y
+# CONFIG_SOC_DRA7XX is not set
+CONFIG_SOC_OMAP3430=y
+CONFIG_SOC_TI81XX=y
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_TOUCHBOOK is not set
+
+CONFIG_SOC_HAS_REALTIME_COUNTER=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_PACKAGE_CBB=y
+CONFIG_OMAP_PACKAGE_CUS=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+
+CONFIG_OMAP2PLUS_MBOX=m
+CONFIG_OMAP_MBOX_KFIFO_SIZE=256
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_DMA_OMAP=y
+CONFIG_OMAP_IOMMU=y
+CONFIG_HWSPINLOCK_OMAP=m
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_8250_OMAP=m
+
+CONFIG_GPIO_TWL4030=m
+CONFIG_GPIO_TWL6040=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_I2C_OMAP=m
+CONFIG_CHARGER_TWL4030=m
+CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=m
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_WATCHDOG=m
+CONFIG_BATTERY_TWL4030_MADC=m
+CONFIG_OMAP_USB2=m
+CONFIG_OMAP_CONTROL_PHY=m
+CONFIG_TI_PIPE3=m
+CONFIG_PCI_DRA7XX=y
+CONFIG_TWL4030_USB=m
+CONFIG_TWL6030_USB=m
+CONFIG_TWL6040_CORE=y
+CONFIG_CLK_TWL6040=m
+CONFIG_OMAP_INTERCONNECT=m
+CONFIG_MFD_OMAP_USB_HOST=y
+CONFIG_HDQ_MASTER_OMAP=m
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_BACKLIGHT_PANDORA=m
+CONFIG_OMAP_OCP2SCP=m
+CONFIG_USB_EHCI_HCD_OMAP=m
+CONFIG_USB_OHCI_HCD_OMAP3=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_DWC3_OMAP=m
+CONFIG_MMC_OMAP=m
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_DRV_MAX8907=m
+# CONFIG_RTC_DRV_TWL92330 is not set
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_SENSORS_TWL4030_MADC=m
+CONFIG_TWL6030_GPADC=m
+CONFIG_BATTERY_RX51=m
+# CONFIG_IR_RX51 is not set
+
+# OMAP5 (possibly other devices too)
+CONFIG_MFD_PALMAS=y
+CONFIG_EXTCON_PALMAS=m
+CONFIG_GPIO_PALMAS=y
+CONFIG_PINCTRL_PALMAS=y
+CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_PBIAS=m
+CONFIG_RTC_DRV_PALMAS=m
+CONFIG_OMAP5_DSS_HDMI=y
+CONFIG_OMAP5_DSS_HDMI_AUDIO=y
+CONFIG_COMMON_CLK_PALMAS=m
+CONFIG_INPUT_PALMAS_PWRBUTTON=m
+
+CONFIG_WL_TI=y
+CONFIG_WLCORE_SDIO=m
+CONFIG_WLCORE_SPI=m
+CONFIG_WL18XX=m
+CONFIG_WILINK_PLATFORM_DATA=y
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_NFC_WILINK=m
+
+CONFIG_MTD_ONENAND_OMAP2=m
+CONFIG_MTD_NAND_OMAP2=m
+CONFIG_MTD_NAND_OMAP_BCH=y
+CONFIG_SPI_OMAP24XX=m
+CONFIG_SPI_TI_QSPI=m
+
+CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_TWL4030_VIBRA=m
+CONFIG_INPUT_TWL6040_VIBRA=m
+CONFIG_KEYBOARD_OMAP4=m
+CONFIG_KEYBOARD_TWL4030=m
+CONFIG_LEDS_TCA6507=m
+
+# OMAP thermal temp.
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
+
+# OMAP3 thermal/power
+CONFIG_POWER_AVS=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
+# CPUFREQ_CPU0 is used for scaling on DT OMAP
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+
+CONFIG_PWM_TIECAP=m
+CONFIG_PWM_TIEHRPWM=m
+CONFIG_PWM_TWL=m
+CONFIG_PWM_TWL_LED=m
+
+CONFIG_CRYPTO_DEV_OMAP_SHAM=m
+CONFIG_CRYPTO_DEV_OMAP_AES=m
+CONFIG_CRYPTO_DEV_OMAP_DES=m
+CONFIG_HW_RANDOM_OMAP=m
+CONFIG_HW_RANDOM_OMAP3_ROM=m
+
+CONFIG_DRM_OMAP=m
+CONFIG_DRM_OMAP_NUM_CRTCS=2
+CONFIG_OMAP2_VRFB=y
+# CONFIG_FB_OMAP2 is not set
+# CONFIG_FB_DA8XX is not set
+
+CONFIG_OMAP2_DSS=m
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_RFBI=y
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP4_DSS_HDMI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
+
+CONFIG_DISPLAY_ENCODER_TFP410=m
+CONFIG_DISPLAY_ENCODER_TPD12S015=m
+CONFIG_DISPLAY_CONNECTOR_DVI=m
+CONFIG_DISPLAY_CONNECTOR_HDMI=m
+CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
+CONFIG_DISPLAY_PANEL_DPI=m
+CONFIG_DISPLAY_PANEL_DSI_CM=m
+CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
+CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
+CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
+CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
+
+# Enable V4L2 drivers for OMAP2+
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_OMAP2_VOUT is not set
+CONFIG_VIDEO_OMAP3=m
+CONFIG_VIDEO_ADP1653=m
+# CONFIG_VIDEO_OMAP4 is not set
+# The ones below are for TI Davinci
+# CONFIG_VIDEO_DM6446_CCDC is not set
+# CONFIG_VIDEO_DM355_CCDC is not set
+
+CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_OMAP_SOC_AM3517EVM=m
+CONFIG_SND_OMAP_SOC_DMIC=m
+CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
+CONFIG_SND_OMAP_SOC_MCBSP=m
+CONFIG_SND_OMAP_SOC_MCPDM=m
+CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_OMAP_SOC_RX51=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_TPA6130A2=m
+CONFIG_SND_SOC_TWL4030=m
+CONFIG_SND_SOC_TWL6040=m
+CONFIG_SND_SOC_PCM1792A=m
+CONFIG_RADIO_WL128X=m
+
+CONFIG_OMAP_REMOTEPROC=m
+
+# CONFIG_OMAP2_DSS_DEBUGFS is not set
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MUX_DEBUG is not set
+# CONFIG_VIDEO_OMAP3_DEBUG is not set
+
+# AM33xx/43xx
+CONFIG_SOC_AM33XX=y
+CONFIG_SOC_AM43XX=y
+CONFIG_AM335X_CONTROL_USB=m
+CONFIG_AM335X_PHY_USB=m
+CONFIG_USB_MUSB_AM335X_CHILD=m
+CONFIG_TI_CPPI41=m
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_TI_ST=m
+CONFIG_TI_DAC7512=m
+CONFIG_TI_DAVINCI_CPDMA=m
+CONFIG_TI_DAVINCI_EMAC=m
+CONFIG_TI_DAVINCI_MDIO=m
+CONFIG_TI_CPSW=m
+CONFIG_TI_CPSW_PHY_SEL=y
+CONFIG_TI_CPTS=y
+# Builtin needed for BBone White
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_TI_EMIF=m
+CONFIG_DRM_TILCDC=m
+CONFIG_SPI_DAVINCI=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_I2S=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_VCIF=m
+CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m
+CONFIG_SND_EDMA_SOC=m
+CONFIG_SND_AM33XX_SOC_EVM=m
+CONFIG_REGULATOR_TI_ABB=m
+CONFIG_TI_ADC081C=m
+CONFIG_TI_AM335X_ADC=m
+CONFIG_PWM_TIPWMSS=y
+CONFIG_MFD_TPS65218=m
+CONFIG_REGULATOR_TPS65218=m
+
+# QCom
+CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SERIAL_MSM_HS=m
+CONFIG_PINCTRL_APQ8064=m
+CONFIG_PINCTRL_APQ8084=m
+CONFIG_PINCTRL_IPQ8064=m
+CONFIG_PINCTRL_MSM8960=m
+CONFIG_PINCTRL_MSM8X74=m
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
+CONFIG_COMMON_CLK_QCOM=m
+CONFIG_MFD_QCOM_RPM=m
+CONFIG_MFD_PM8921_CORE=m
+CONFIG_REGULATOR_QCOM_RPM=m
+CONFIG_APQ_GCC_8084=m
+CONFIG_APQ_MMCC_8084=m
+CONFIG_IPQ_GCC_806X=m
+CONFIG_MSM_GCC_8660=m
+CONFIG_MSM_GCC_8960=m
+CONFIG_MSM_MMCC_8960=m
+CONFIG_MSM_GCC_8974=m
+CONFIG_MSM_MMCC_8974=m
+CONFIG_HW_RANDOM_MSM=m
+CONFIG_I2C_QUP=m
+CONFIG_SPI_QUP=m
+CONFIG_GPIO_MSM_V2=m
+CONFIG_POWER_RESET_MSM=y
+CONFIG_USB_MSM_OTG=m
+CONFIG_MMC_SDHCI_MSM=m
+CONFIG_MMC_QCOM_DML=m
+CONFIG_QCOM_BAM_DMA=m
+CONFIG_QCOM_GSBI=m
+CONFIG_PHY_QCOM_APQ8064_SATA=m
+CONFIG_PHY_QCOM_IPQ806X_SATA=m
+CONFIG_USB_DWC3_QCOM=m
+CONFIG_CRYPTO_DEV_QCE=m
+# CONFIG_MSM_IOMMU is not set
+CONFIG_DRM_MSM=m
+CONFIG_DRM_MSM_FBDEV=y
+CONFIG_USB_EHCI_MSM=m
+CONFIG_MFD_PM8XXX=m
+CONFIG_KEYBOARD_PMIC8XXX=m
+CONFIG_INPUT_PM8XXX_VIBRATOR=m
+CONFIG_INPUT_PMIC8XXX_PWRKEY=m
+CONFIG_RTC_DRV_PM8XXX=m
+# CONFIG_DRM_MSM_REGISTER_LOGGING is not set 
+CONFIG_QCOM_WDT=m
+CONFIG_MFD_SPMI_PMIC=m
+CONFIG_SPMI=m
+CONFIG_SPMI_MSM_PMIC_ARB=m
+CONFIG_QCOM_SPMI_IADC=m
+
+# i.MX
+# CONFIG_MXC_DEBUG_BOARD is not set
+CONFIG_SOC_IMX50=y
+CONFIG_SOC_IMX51=y
+CONFIG_SOC_IMX53=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
+# CONFIG_SOC_LS1021A is not set
+# CONFIG_SOC_VF610 is not set
+CONFIG_ARM_IMX6Q_CPUFREQ=m
+CONFIG_POWER_RESET_IMX=y
+CONFIG_PCI_IMX6=y
+CONFIG_IMX_THERMAL=m
+CONFIG_IMX_SDMA=m
+CONFIG_IMX_DMA=m
+CONFIG_MXS_DMA=y
+CONFIG_AHCI_IMX=m
+CONFIG_PATA_IMX=m
+CONFIG_USB_EHCI_MXC=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+# CONFIG_USB_CHIPIDEA_DEBUG is not set
+CONFIG_USB_FSL_USB2=m
+CONFIG_NET_VENDOR_FREESCALE=y
+CONFIG_FEC=m
+CONFIG_KEYBOARD_IMX=m
+CONFIG_KEYBOARD_STMPE=m
+CONFIG_TOUCHSCREEN_STMPE=m
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_PINCTRL_IMX6SL=y
+CONFIG_I2C_IMX=m
+CONFIG_STMPE_I2C=y
+CONFIG_SPI_IMX=m
+CONFIG_SPI_FSL_QUADSPI=m
+CONFIG_STMPE_SPI=y
+CONFIG_MFD_MC13XXX_SPI=m
+CONFIG_MFD_STMPE=y
+CONFIG_MTD_NAND_GPMI_NAND=m
+CONFIG_W1_MASTER_MXC=m
+CONFIG_IMX_WEIM=y
+CONFIG_IMX2_WDT=m
+CONFIG_HW_RANDOM_MXC_RNGA=m
+CONFIG_CRYPTO_DEV_SAHARA=m
+CONFIG_RTC_DRV_SNVS=m
+# CONFIG_FB_MX3 is not set
+# CONFIG_FB_IMX is not set
+# CONFIG_FB_MXS is not set
+
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_FSL_ASOC_CARD=m
+CONFIG_SND_SOC_FSL_ASRC=m
+CONFIG_SND_SOC_FSL_ESAI=m
+CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_SOC_FSL_SPDIF=m
+CONFIG_SND_SOC_FSL_SSI=m
+CONFIG_SND_SOC_FSL_UTILS=m
+CONFIG_SND_SOC_IMX_SSI=m
+CONFIG_SND_SOC_IMX_AUDMUX=m
+CONFIG_SND_SOC_IMX_ES8328=m
+CONFIG_SND_SOC_IMX_PCM_FIQ=m
+CONFIG_SND_SOC_IMX_PCM_DMA=m
+CONFIG_SND_SOC_IMX_SGTL5000=m
+CONFIG_SND_SOC_IMX_WM8962=m
+CONFIG_SND_SOC_IMX_MC13783=m
+CONFIG_SND_SOC_IMX_SPDIF=m
+CONFIG_SND_SOC_CS42XX8_I2C=m
+CONFIG_SND_SOC_ES8328=m
+CONFIG_SND_SOC_ES8328_I2C=m
+CONFIG_SND_SOC_ES8328_SPI=m
+CONFIG_SND_SOC_EUKREA_TLV320=m
+CONFIG_SND_SOC_SGTL5000=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8962=m
+
+CONFIG_USB_IMX21_HCD=m
+CONFIG_USB_MXS_PHY=m
+CONFIG_MMC_SDHCI_ESDHC_IMX=m
+CONFIG_MMC_MXC=m
+CONFIG_SPI_MXS=m
+CONFIG_RTC_DRV_IMXDI=m
+CONFIG_RTC_DRV_MXC=m
+# CONFIG_MX3_IPU is not set
+# CONFIG_MX3_IPU_IRQS is not set
+
+CONFIG_PWM_IMX=m
+CONFIG_DRM_IMX=m
+CONFIG_DRM_IMX_FB_HELPER=m
+CONFIG_DRM_IMX_HDMI=m
+CONFIG_IMX_IPUV3_CORE=m
+CONFIG_DRM_IMX_IPUV3=m
+CONFIG_DRM_IMX_LDB=m
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
+CONFIG_DRM_IMX_TVE=m
+CONFIG_VIDEO_CODA=m
+
+CONFIG_SENSORS_MC13783_ADC=m
+CONFIG_REGULATOR_ANATOP=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_LEDS_MC13783=m
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_CAN_FLEXCAN=m
+
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_INPUT_88PM80X_ONKEY=m
+
+# i.MX6Q (and likely Samsung among others) 
+CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_DA9052_SPI=y
+CONFIG_MFD_DA9055=y
+CONFIG_TOUCHSCREEN_DA9052=m
+CONFIG_INPUT_DA9052_ONKEY=m
+CONFIG_INPUT_DA9055_ONKEY=m
+CONFIG_GPIO_DA9052=m
+CONFIG_GPIO_DA9055=m
+CONFIG_GPIO_STMPE=y
+CONFIG_BATTERY_DA9052=m
+CONFIG_SENSORS_DA9052_ADC=m
+CONFIG_SENSORS_DA9055=m
+CONFIG_DA9052_WATCHDOG=m
+CONFIG_DA9055_WATCHDOG=m
+CONFIG_BACKLIGHT_DA9052=m
+CONFIG_LEDS_DA9052=m
+CONFIG_RTC_DRV_DA9052=m
+CONFIG_RTC_DRV_DA9055=m
+CONFIG_REGULATOR_DA9052=m
+CONFIG_REGULATOR_DA9055=m
+
+# picoxcell
+# CONFIG_CRYPTO_DEV_PICOXCELL is not set
+
+# Exynos 4
+CONFIG_ARCH_EXYNOS4=y
+CONFIG_SOC_EXYNOS4212=y
+CONFIG_SOC_EXYNOS4412=y
+CONFIG_SOC_EXYNOS4415=y
+CONFIG_ARM_EXYNOS4210_CPUFREQ=y
+CONFIG_ARM_EXYNOS4X12_CPUFREQ=y
+CONFIG_AK8975=m
+CONFIG_CM36651=m
+CONFIG_KEYBOARD_SAMSUNG=m
+
+# ST Ericsson
+CONFIG_MACH_HREFV60=y
+CONFIG_MACH_SNOWBALL=y
+
+CONFIG_ABX500_CORE=y
+# CONFIG_ARM_U8500_CPUIDLE is not set
+CONFIG_UX500_DEBUG_UART=2
+CONFIG_AB8500_CORE=y
+CONFIG_STE_DMA40=y
+CONFIG_HSEM_U8500=m
+CONFIG_PINCTRL_ABX500=y
+CONFIG_PINCTRL_AB8500=y
+CONFIG_I2C_NOMADIK=m
+CONFIG_KEYBOARD_NOMADIK=m
+CONFIG_DB8500_CPUFREQ_COOLING=m
+CONFIG_DB8500_THERMAL=y
+CONFIG_UX500_WATCHDOG=m
+CONFIG_AHCI_ST=m
+CONFIG_INPUT_AB8500_PONKEY=m
+CONFIG_REGULATOR_AB8500=y
+CONFIG_AB8500_USB=m
+CONFIG_USB_MUSB_UX500=m
+# CONFIG_USB_UX500_DMA is not set
+CONFIG_RTC_DRV_AB8500=m
+CONFIG_PWM_AB8500=m
+CONFIG_SND_SOC_UX500=m
+CONFIG_SND_SOC_UX500_PLAT_DMA=m
+CONFIG_SND_SOC_UX500_MACH_MOP500=m
+CONFIG_CLKSRC_DBX500_PRCMU=y
+CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK=y
+CONFIG_CRYPTO_DEV_UX500=m
+CONFIG_CRYPTO_DEV_UX500_CRYP=m
+CONFIG_CRYPTO_DEV_UX500_HASH=m
+CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_GPADC=y
+CONFIG_SENSORS_AB8500=m
+CONFIG_STE_MODEM_RPROC=m
+CONFIG_STIH415_RESET=y
+
+CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
+CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
+CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
+CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
+CONFIG_IIO_ST_PRESS=m
+CONFIG_IIO_ST_PRESS_I2C=m
+CONFIG_IIO_ST_PRESS_SPI=m
+CONFIG_IIO_ST_SENSORS_I2C=m
+CONFIG_IIO_ST_SENSORS_SPI=m
+CONFIG_IIO_ST_SENSORS_CORE=m
+
+# Allwinner
+CONFIG_MACH_SUN4I=y
+CONFIG_MACH_SUN5I=y
+
+# Tegra (non A15)
+CONFIG_ARCH_TEGRA_2x_SOC=y
+CONFIG_ARCH_TEGRA_3x_SOC=y
+CONFIG_TEGRA20_MC=y
+CONFIG_TEGRA_IOMMU_GART=y
+CONFIG_SPI_TEGRA20_SFLASH=m
+CONFIG_SPI_TEGRA20_SLINK=m
+CONFIG_MFD_MAX8907=m
+CONFIG_SND_SOC_TEGRA_ALC5632=m
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
+CONFIG_SND_SOC_TEGRA_WM8753=m
+CONFIG_SND_SOC_TEGRA_WM8903=m
+CONFIG_SND_SOC_TEGRA_WM9712=m
+CONFIG_SND_SOC_TEGRA20_AC97=m
+CONFIG_SND_SOC_TEGRA20_DAS=m
+CONFIG_SND_SOC_TEGRA20_SPDIF=m
+
+# AC100 (PAZ00)
+CONFIG_MFD_NVEC=y
+CONFIG_MFD_TPS80031=y
+CONFIG_KEYBOARD_NVEC=y
+CONFIG_SERIO_NVEC_PS2=y
+CONFIG_NVEC_POWER=y
+CONFIG_NVEC_PAZ00=y
+CONFIG_MFD_TPS6586X=y
+CONFIG_GPIO_TPS6586X=y
+CONFIG_RTC_DRV_TPS6586X=m
+
+# OLPC XO
+CONFIG_SERIO_OLPC_APSP=m
+
+# Zynq-7xxx
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_COMMON_CLK_AXI_CLKGEN=m
+CONFIG_COMMON_CLK_SI570=m
+CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
+CONFIG_ARM_ZYNQ_CPUIDLE=y
+CONFIG_LATTICE_ECP3_CONFIG=m
+CONFIG_NET_VENDOR_XILINX=y
+CONFIG_XILINX_EMACLITE=m
+CONFIG_GPIO_XILINX=y
+CONFIG_GPIO_ZYNQ=m
+CONFIG_I2C_XILINX=m
+CONFIG_SPI_XILINX=m
+CONFIG_SPI_CADENCE=m
+CONFIG_MMC_SDHCI_OF_ARASAN=m
+CONFIG_I2C_CADENCE=m
+CONFIG_XILINX_WATCHDOG=m
+CONFIG_XILINX_XADC=m
+CONFIG_XILINX_VDMA=m
+CONFIG_SND_SOC_ADI=m
+CONFIG_SND_SOC_ADI_AXI_I2S=m
+CONFIG_SND_SOC_ADI_AXI_SPDIF=m
+CONFIG_XILLYBUS=m
+CONFIG_XILLYBUS_PCIE=m
+CONFIG_XILLYBUS_OF=m
+CONFIG_GS_FPGABOOT=m
+CONFIG_USB_GADGET_XILINX=m
+CONFIG_PCIE_XILINX=y
+CONFIG_CADENCE_WATCHDOG=m
+CONFIG_REGULATOR_ISL9305=m
+
+# Multi function devices
+CONFIG_MFD_88PM800=m
+CONFIG_MFD_88PM805=m
+CONFIG_MFD_T7L66XB=y
+CONFIG_MFD_TC6387XB=y
+
+# Generic drivers
+CONFIG_REMOTEPROC=m
+
+# Regulator drivers
+CONFIG_REGULATOR_FAN53555=m
+# CONFIG_REGULATOR_88PM800 is not set
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_LP872X=y
+CONFIG_REGULATOR_LP8755=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8907=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_MAX8973=m

config-armv7-generic

@@ -0,0 +1,854 @@
+# arm configs for sharing between armv7 and armv7-lpae
+# Generic ARM config options
+CONFIG_ARM=y
+
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V7=y
+
+CONFIG_CMDLINE=""
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_AEABI=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+CONFIG_IWMMXT=y
+CONFIG_KERNEL_MODE_NEON=y
+
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ASM_UNIFIED=y
+CONFIG_ARM_CPU_TOPOLOGY=y
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_SWP_EMULATE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_PL310=y
+CONFIG_HIGHPTE=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_ATAGS=y
+CONFIG_ATAGS_PROC=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_IRQ_CROSSBAR=y
+
+# CONFIG_MCPM is not set
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_DMA_CACHE_RWFO is not set
+# CONFIG_THUMB2_KERNEL is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_ARM_VIRT_EXT is not set
+
+# Platforms enabled/disabled globally on ARMv7
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
+CONFIG_ARCH_VIRT=y
+# CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_HI3xxx is not set
+# CONFIG_ARCH_HISI is not set
+# CONFIG_ARCH_MEDIATEK is not set
+# CONFIG_ARCH_MESON is not set
+# CONFIG_ARCH_QCOM is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SHMOBILE_MULTI is not set
+# CONFIG_ARCH_SIRF is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_STI is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_VEXPRESS_SPC is not set
+# CONFIG_ARCH_WM8850 is not set
+
+# errata
+# v5/v6
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+# Cortex-A8
+CONFIG_ARM_ERRATA_430973=y
+# The following two don't work with MP
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# Cortex-A9
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_742230=y
+CONFIG_ARM_ERRATA_742231=y
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+# Disabled due to causing highbank to crash
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_PJ4B_ERRATA_4742=y
+# Cortex-A15
+# CONFIG_ARM_ERRATA_798181 is not set
+# CONFIG_ARM_ERRATA_773022 is not set
+
+# generic that deviates from or should be merged into config-generic
+CONFIG_SMP_ON_UP=y
+CONFIG_HIGHMEM=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_SMT=y
+
+CONFIG_RCU_FANOUT=32
+
+CONFIG_CHECKPOINT_RESTORE=y
+
+# Power management / thermal / cpu scaling
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
+
+CONFIG_PM_OPP=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_PSCI=y
+CONFIG_THERMAL=y
+CONFIG_CLOCK_THERMAL=y
+CONFIG_CPUFREQ_DT=y
+# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
+
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_LSM_MMAP_MIN_ADDR=32768
+
+CONFIG_XZ_DEC_ARM=y
+
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+CONFIG_PCI_HOST_GENERIC=y
+# CONFIG_PCI_LAYERSCAPE is not set
+
+CONFIG_LBDAF=y
+
+# GRR, needed for MFD_AS3722
+CONFIG_I2C=y
+
+# Device tree
+CONFIG_USE_OF=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_APPENDED_DTB=y
+
+# General vexpress ARM drivers
+CONFIG_ARM_TIMER_SP804=y
+
+CONFIG_SERIO_AMBAKMI=m
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_MRST_MAX3110=m
+
+CONFIG_RTC_DRV_PL030=y
+CONFIG_RTC_DRV_PL031=y
+
+CONFIG_PL330_DMA=m
+CONFIG_AMBA_PL08X=y
+CONFIG_GPIO_PL061=y
+CONFIG_PL320_MBOX=y
+CONFIG_SND_ARMAACI=m
+
+# highbank
+CONFIG_EDAC_HIGHBANK_MC=m
+CONFIG_EDAC_HIGHBANK_L2=m
+CONFIG_SATA_HIGHBANK=m
+CONFIG_ARM_HIGHBANK_CPUFREQ=m
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
+
+# Allwinner
+# CONFIG_MACH_SUN4I is not set
+# CONFIG_MACH_SUN5I is not set
+CONFIG_MACH_SUN6I=y
+CONFIG_MACH_SUN7I=y
+CONFIG_MACH_SUN8I=y
+# CONFIG_MACH_SUN9I is not set
+CONFIG_DMA_SUN6I=m
+CONFIG_SUNXI_WATCHDOG=m
+CONFIG_NET_VENDOR_ALLWINNER=y
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_EEPROM_SUNXI_SID=m
+CONFIG_RTC_DRV_SUNXI=m
+CONFIG_PHY_SUN4I_USB=m
+CONFIG_AHCI_SUNXI=m
+CONFIG_SPI_SUN4I=m
+CONFIG_SPI_SUN6I=m
+CONFIG_MMC_SUNXI=m
+CONFIG_I2C_SUN6I_P2WI=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_POWER_RESET_SUN6I=y
+CONFIG_TOUCHSCREEN_SUN4I=m
+CONFIG_MFD_AXP20X=y
+CONFIG_REGULATOR_AXP20X=m
+CONFIG_IR_SUNXI=m
+CONFIG_MDIO_SUN4I=m
+CONFIG_SUN4I_EMAC=m
+CONFIG_RTC_DRV_SUN6I=m
+CONFIG_AXP288_ADC=m
+CONFIG_MTD_NAND_SUNXI=m
+
+# Exynos
+CONFIG_ARCH_EXYNOS3=y
+# CONFIG_ARCH_EXYNOS4 is not set
+CONFIG_ARCH_EXYNOS5=y
+CONFIG_SOC_EXYNOS3250=y
+CONFIG_SOC_EXYNOS5250=y
+CONFIG_SOC_EXYNOS5420=y
+CONFIG_SOC_EXYNOS5440=y
+CONFIG_SOC_EXYNOS5260=y
+CONFIG_SOC_EXYNOS5410=y
+CONFIG_SOC_EXYNOS5800=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_ARM_EXYNOS5250_CPUFREQ=y
+CONFIG_ARM_EXYNOS5440_CPUFREQ=y
+CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW=y
+CONFIG_ARM_EXYNOS_CPUIDLE=y
+# CONFIG_EXYNOS5420_MCPM not set
+
+CONFIG_I2C_EXYNOS5=m
+CONFIG_I2C_S3C2410=m
+CONFIG_SPI_S3C64XX=m
+CONFIG_EXYNOS_THERMAL=m
+CONFIG_EXYNOS_THERMAL_CORE=y
+CONFIG_EXYNOS_ADC=m
+CONFIG_MMC_SDHCI_S3C=m
+CONFIG_MMC_SDHCI_S3C_DMA=y
+CONFIG_MMC_DW_EXYNOS=m
+CONFIG_EXYNOS_IOMMU=y
+CONFIG_PCI_EXYNOS=y
+CONFIG_PHY_EXYNOS5_USBDRD=m
+CONFIG_PHY_SAMSUNG_USB2=m
+CONFIG_USB_EHCI_EXYNOS=m
+CONFIG_USB_OHCI_EXYNOS=m
+CONFIG_USB_DWC3_EXYNOS=m
+CONFIG_PHY_EXYNOS5250_SATA=m
+CONFIG_HW_RANDOM_EXYNOS=m
+CONFIG_CRYPTO_DEV_S5P=m
+CONFIG_PWM_SAMSUNG=m
+CONFIG_S3C2410_WATCHDOG=m
+CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_S2MPS11=m
+CONFIG_REGULATOR_S5M8767=m
+CONFIG_TCG_TIS_I2C_INFINEON=m
+CONFIG_RTC_DRV_S5M=m
+CONFIG_RTC_DRV_S3C=m
+CONFIG_MFD_WM8994=m
+CONFIG_GPIO_WM8994=m
+CONFIG_REGULATOR_WM8994=m
+
+CONFIG_EXYNOS_VIDEO=y
+CONFIG_EXYNOS_MIPI_DSI=y
+CONFIG_DRM_EXYNOS=m
+CONFIG_DRM_EXYNOS_DMABUF=y
+CONFIG_DRM_EXYNOS_DP=y
+CONFIG_DRM_EXYNOS_DPI=y
+CONFIG_DRM_EXYNOS_DSI=y
+CONFIG_DRM_EXYNOS_FIMC=y
+CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS_G2D=y
+CONFIG_DRM_EXYNOS_GSC=y
+CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_EXYNOS_IOMMU=y
+CONFIG_DRM_EXYNOS_IPP=y
+CONFIG_DRM_EXYNOS_ROTATOR=y
+CONFIG_DRM_EXYNOS_VIDI=y
+CONFIG_PHY_EXYNOS_DP_VIDEO=m
+# CONFIG_FB_S3C is not set
+CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
+CONFIG_PHY_EXYNOS_DP_VIDEO=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
+CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
+CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
+CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
+CONFIG_VIDEO_S5P_FIMC=m
+CONFIG_VIDEO_S5P_MIPI_CSIS=m
+CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+# CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+
+CONFIG_SND_SOC_SAMSUNG=m
+CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
+CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
+CONFIG_SND_SOC_SMDK_WM8994_PCM=m
+CONFIG_SND_SOC_SNOW=m
+CONFIG_SND_SOC_ODROIDX2=m
+# CONFIG_EXYNOS_IOMMU_DEBUG is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
+# CONFIG_ARM_EXYNOS5_BUS_DEVFREQ is not set
+
+# Arndale/Origen
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_MAX77686=y
+CONFIG_REGULATOR_MAX8997=m
+CONFIG_REGULATOR_MAX77686=m
+CONFIG_REGULATOR_S2MPA01=m
+CONFIG_REGULATOR_S5M8767=m
+CONFIG_COMMON_CLK_MAX77686=m
+CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_INPUT_MAX8997_HAPTIC=m
+CONFIG_CHARGER_MAX8997=m
+CONFIG_LEDS_MAX8997=m
+CONFIG_RTC_DRV_MAX8997=m
+CONFIG_RTC_DRV_MAX77686=m
+CONFIG_RTC_DRV_MAX77802=m
+CONFIG_RTC_DRV_RK808=m
+CONFIG_EXTCON_MAX8997=m
+
+# Rockchips
+CONFIG_I2C_RK3X=m
+CONFIG_SPI_ROCKCHIP=m
+CONFIG_PWM_ROCKCHIP=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_ROCKCHIP_IODOMAIN=m
+CONFIG_MMC_DW_ROCKCHIP=m
+CONFIG_EMAC_ROCKCHIP=m
+CONFIG_MFD_RK808=m
+CONFIG_COMMON_CLK_RK808=m
+CONFIG_REGULATOR_RK808=m
+CONFIG_RTC_DRV_HYM8563=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_SND_SOC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP_I2S=m
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_DRM_ROCKCHIP=m
+
+# Tegra
+CONFIG_ARCH_TEGRA_114_SOC=y
+CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_ARM_TEGRA_CPUFREQ=y
+CONFIG_TRUSTED_FOUNDATIONS=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_TEGRA30_MC=y
+CONFIG_PCI_TEGRA=y
+CONFIG_AHCI_TEGRA=m
+CONFIG_TEGRA_IOMMU_SMMU=y
+CONFIG_MMC_SDHCI_TEGRA=m
+CONFIG_TEGRA_WATCHDOG=m
+CONFIG_I2C_TEGRA=m
+CONFIG_TEGRA_AHB=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_SPI_TEGRA114=m
+CONFIG_PWM_TEGRA=m
+CONFIG_KEYBOARD_TEGRA=m
+CONFIG_USB_EHCI_TEGRA=m
+CONFIG_RTC_DRV_TEGRA=m
+CONFIG_SND_SOC_TEGRA=m
+CONFIG_SND_SOC_TEGRA_MAX98090=m
+CONFIG_SND_SOC_TEGRA_RT5640=m
+CONFIG_SND_SOC_TEGRA30_AHUB=m
+CONFIG_SND_SOC_TEGRA30_I2S=m
+CONFIG_SND_HDA_TEGRA=m
+CONFIG_TEGRA_HOST1X=m
+CONFIG_TEGRA_HOST1X_FIREWALL=y
+CONFIG_DRM_TEGRA=m
+CONFIG_DRM_TEGRA_FBDEV=y
+# CONFIG_DRM_TEGRA_DEBUG is not set
+CONFIG_DRM_TEGRA_STAGING=y
+CONFIG_NOUVEAU_PLATFORM_DRIVER=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_AD525X_DPOT_SPI=m
+CONFIG_TEGRA_SOCTHERM=m
+CONFIG_TEGRA_MC=y
+
+# Jetson TK1
+CONFIG_PINCTRL_AS3722=y
+CONFIG_POWER_RESET_AS3722=y
+CONFIG_MFD_AS3722=y
+CONFIG_REGULATOR_AS3722=m
+CONFIG_RTC_DRV_AS3722=y
+
+# TI Generic
+CONFIG_TI_SOC_THERMAL=m
+CONFIG_TI_THERMAL=y
+
+# DRM panels
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_LD9040=m
+CONFIG_DRM_PANEL_S6E8AA0=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
+
+# regmap
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_SPI=m
+CONFIG_REGMAP_SPMI=m
+CONFIG_REGMAP_MMIO=m
+CONFIG_REGMAP_IRQ=y
+
+# usb
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_ULPI=y
+CONFIG_AX88796=m
+CONFIG_AX88796_93CX6=y
+
+# usb gadget 
+CONFIG_USB_OTG=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_VBUS_DRAW=100
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+# Use PIO on musb as upstream doesn't support multiple DMA engines yet :-/
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_GADGET_XILINX is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_DUAL_ROLE=y
+CONFIG_USB_MUSB_DSPS=m
+# CONFIG_USB_MUSB_TUSB6010 is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+# CONFIG_USB_CONFIGFS_RNDIS is not set
+CONFIG_USB_CONFIGFS_SERIAL=y
+# CONFIG_USB_CONFIGFS_F_LB_SS is not set
+# CONFIG_USB_CONFIGFS_F_FS is not set
+# CONFIG_USB_CONFIGFS_F_UAC1 is not set
+# CONFIG_USB_CONFIGFS_F_UAC2 is not set
+# CONFIG_USB_CONFIGFS_F_MIDI is not set
+# CONFIG_USB_CONFIGFS_F_HID is not set
+
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+# CONFIG_USB_FUSB300 is not set
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_BDC_UDC is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_AMD5536UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_ZERO_HNPTEST is not set
+
+# Multifunction Devices
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_TPS65912=y
+CONFIG_MFD_TPS65912_I2C=y
+CONFIG_MFD_TPS65912_SPI=y
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_PM8921_CORE is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# 
+
+# Pin stuff
+CONFIG_PINMUX=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GENERIC_PINCONF=y
+# CONFIG_PINCTRL_SAMSUNG is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+# CONFIG_PINCTRL_BCM281XX is not set
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+
+# GPIO
+# CONFIG_GPIO_EM is not set
+CONFIG_GPIO_74X164=m
+CONFIG_GPIO_MAX7301=m
+CONFIG_GPIO_MC33880=m
+CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_TPS65912=m
+# CONFIG_GPIO_ZEVIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_REGISTER=y
+CONFIG_MDIO_BUS_MUX=m
+CONFIG_MDIO_BUS_MUX_GPIO=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=m
+CONFIG_INPUT_GPIO=m
+CONFIG_INPUT_GPIO_BEEPER=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_MATRIXKMAP=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_MATRIX=m
+# CONFIG_GPIO_RCAR is not set
+CONFIG_W1_MASTER_GPIO=m
+
+# SPI
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_ALTERA=m
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_BUTTERFLY=m
+CONFIG_SPI_DESIGNWARE=m
+CONFIG_SPI_LM70_LLP=m
+CONFIG_SPI_OC_TINY=m
+CONFIG_SPI_SC18IS602=m
+CONFIG_SPI_TLE62X0=m
+CONFIG_SPI_XCOMM=m
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_CADENCE is not set
+
+CONFIG_NFC_NCI_SPI=y
+
+# i2c
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_MV64XXX=m
+
+# HW crypto and rng
+CONFIG_CRYPTO_SHA1_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+# CONFIG_CRYPTO_AES_ARM_BS is not set
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA512_ARM_NEON=m
+
+# DMA
+CONFIG_TI_PRIV_EDMA=y
+CONFIG_TI_EDMA=y
+
+# EDAC
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_LEGACY_SYSFS=y
+
+# Watchdog
+
+# Mailbox
+CONFIG_MAILBOX=y
+
+# MTD
+# CONFIG_MG_DISK is not set
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
+CONFIG_MTD_DATAFLASH_OTP=y
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_CAFE=m
+# CONFIG_MTD_NAND_DENALI is not set
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND_FSMC=m
+CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_MXC=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_ORION=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_TMIO=m
+CONFIG_MTD_SPI_NOR=m
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_SPINAND_MT29F=m
+CONFIG_MTD_SPINAND_ONDIEECC=y
+CONFIG_MTD_SST25L=m
+CONFIG_MTD_ST_SPI_FSM=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_93XX46=m
+
+# MMC/SD
+CONFIG_MMC_SPI=m
+
+# Designware (used by numerous devices)
+CONFIG_MMC_DW=m
+CONFIG_MMC_DW_PLTFM=m
+CONFIG_MMC_DW_PCI=m
+CONFIG_SPI_DW_MMIO=m
+CONFIG_SPI_DW_PCI=m
+# CONFIG_MMC_DW_IDMAC is not set
+# CONFIG_MMC_DW_K3 is not set
+# CONFIG_MMC_QCOM_DML is not set
+CONFIG_USB_DWC2=m
+CONFIG_USB_DWC2_DUAL_ROLE=y
+CONFIG_USB_DWC2_PLATFORM=m
+CONFIG_USB_DWC2_PCI=m
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_DWC3=m
+CONFIG_USB_DWC3_DUAL_ROLE=y
+CONFIG_USB_DWC3_PCI=m
+# CONFIG_USB_DWC3_DEBUG is not set
+# CONFIG_DWC3_HOST_USB3_LPM_ENABLE is not set
+CONFIG_DW_WATCHDOG=m
+CONFIG_PCIE_DW=y
+
+# Sound
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC_AC97_BUS=y
+
+# Displays
+CONFIG_BACKLIGHT_TPS65217=m
+
+# RTC
+CONFIG_RTC_DRV_DS1305=m
+CONFIG_RTC_DRV_DS1390=m
+CONFIG_RTC_DRV_DS3234=m
+CONFIG_RTC_DRV_M41T93=m
+CONFIG_RTC_DRV_M41T94=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_PCF2123=m
+CONFIG_RTC_DRV_R9701=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_RX4581=m
+CONFIG_RTC_DRV_TPS65910=m
+CONFIG_RTC_DRV_TPS80031=m
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+# CONFIG_RTC_DRV_XGENE  is not set
+
+# Regulators
+CONFIG_REGULATOR=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+# CONFIG_REGULATOR_ACT8865 is not set
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_DA9210=m
+CONFIG_REGULATOR_FAN53555=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_LP872X=m
+CONFIG_REGULATOR_LP8755=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_MAX8973=m
+CONFIG_REGULATOR_PFUZE100=m
+CONFIG_REGULATOR_TPS51632=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65090=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_TPS6524X=m
+CONFIG_REGULATOR_TPS6586X=m
+CONFIG_REGULATOR_TPS65910=m
+CONFIG_REGULATOR_TPS65912=m
+CONFIG_REGULATOR_TPS80031=m
+CONFIG_REGULATOR_LTC3589=m
+CONFIG_REGULATOR_ANATOP=m
+CONFIG_REGULATOR_DA9211=m
+CONFIG_REGULATOR_ISL9305=m
+CONFIG_REGULATOR_MAX77802=m
+CONFIG_REGULATOR_PWM=m
+CONFIG_SENSORS_LTC2978_REGULATOR=y
+
+CONFIG_POWER_AVS=y
+CONFIG_CHARGER_MANAGER=y
+CONFIG_CHARGER_BQ2415X=m
+CONFIG_CHARGER_BQ24190=m
+CONFIG_CHARGER_BQ24735=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_CHARGER_TPS65090=m
+CONFIG_PDA_POWER=m
+CONFIG_GENERIC_ADC_BATTERY=m
+CONFIG_BATTERY_SBS=m
+
+# Sensors
+CONFIG_TMP006=m
+CONFIG_BMP085=y
+CONFIG_BMP085_I2C=m
+CONFIG_BMP085_SPI=m
+CONFIG_SENSORS_AD7314=m
+CONFIG_SENSORS_ADCXX=m
+CONFIG_SENSORS_ADS7871=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_HTU21=m
+CONFIG_SENSORS_ISL29018=m
+CONFIG_SENSORS_ISL29028=m
+CONFIG_SENSORS_LIS3_SPI=m
+CONFIG_SENSORS_LM70=m
+CONFIG_SENSORS_MAX1111=m
+
+CONFIG_LCD_L4F00242T03=m
+CONFIG_LCD_LMS283GF05=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_LCD_ILI922X=m
+CONFIG_LCD_ILI9320=m
+CONFIG_LCD_TDO24M=m
+CONFIG_LCD_VGG2432A4=m
+CONFIG_LCD_S6E63M0=m
+CONFIG_LCD_LD9040=m
+CONFIG_LCD_AMS369FG06=m
+CONFIG_LCD_LMS501KF03=m
+CONFIG_LCD_HX8357=m
+
+# Input
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_ARIZONA_HAPTICS=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_SOC_BUTTON_ARRAY=m
+
+CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_AD7877=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_TSC2005=m
+
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_SYSCON=y
+CONFIG_BMP085_SPI=m
+
+CONFIG_MFD_SYSCON=y
+CONFIG_GPIO_SYSCON=m
+CONFIG_POWER_RESET_SYSCON=y
+
+CONFIG_SRAM=y
+
+# Ethernet
+CONFIG_KS8851=m
+CONFIG_KS8851_MLL=m
+CONFIG_ENC28J60=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_P54_SPI=m
+CONFIG_P54_SPI_DEFAULT_EEPROM=n
+CONFIG_MICREL_KS8995MA=m
+CONFIG_IEEE802154_AT86RF230=m
+CONFIG_IEEE802154_MRF24J40=m
+
+CONFIG_ARM_KPROBES_TEST=m
+
+# jffs2
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+
+# Sensors
+CONFIG_SENSORS_HTU21=m
+
+# Chromebook
+CONFIG_MFD_CROS_EC=m
+CONFIG_MFD_CROS_EC_I2C=m
+CONFIG_MFD_CROS_EC_SPI=m
+CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_I2C_CROS_EC_TUNNEL=m
+CONFIG_SND_SOC_TS3A227E=m
+
+# Needs work/investigation
+# CONFIG_ARM_KPROBES_TEST is not set
+
+# HW Enabled in armv7 not lpae
+# CONFIG_DRM_TILCDC is not set
+# CONFIG_DRM_IMX is not set
+# CONFIG_DRM_STI is not set
+# CONFIG_AHCI_IMX is not set
+# CONFIG_IMX_THERMAL is not set
+# CONFIG_TI_DAC7512 is not set
+
+# Not needed on ARMv7
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+# CONFIG_SERIAL_8250_EM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_BCM63XX is not set
+# CONFIG_FB_XILINX is not set
+# CONFIG_BRCMSTB_GISB_ARB is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SFC is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_POWER_RESET_QNAP is not set
+# CONFIG_MMC_TMIO is not set
+# CONFIG_PINCTRL_IMX35 is not set
+# CONFIG_DVB_USB_PCTV452E is not set
+# CONFIG_DWMAC_SOCFPGA is not set
+
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+
+# Debug options. We need to deal with them at some point like x86
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_DMADEVICES_VDEBUG is not set
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_OMAP2_DSS_DEBUG is not set
+# CONFIG_CRYPTO_DEV_UX500_DEBUG is not set
+# CONFIG_AB8500_DEBUG is not set
+# CONFIG_ARM_KERNMEM_PERMS is not set

config-armv7-lpae

@@ -0,0 +1,84 @@
+# ARM A15 lpae unified arch kernel
+CONFIG_ARCH_KEYSTONE=y
+
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_SOC_OMAP5 is not set
+# CONFIG_SOC_AM33XX is not set
+# CONFIG_SOC_AM43XX is not set
+# CONFIG_SOC_DRA7XX is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_AXXIA is not set
+
+CONFIG_ARM_LPAE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
+
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+CONFIG_CMA_SIZE_MBYTES=64
+
+# Cortex-A15
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_ARM_ERRATA_773022=y
+
+CONFIG_KVM=y
+CONFIG_KVM_ARM_HOST=y
+CONFIG_KVM_ARM_MAX_VCPUS=8
+CONFIG_KVM_ARM_TIMER=y
+
+# CONFIG_XEN is not set
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_XEN_WDT=m
+# CONFIG_XEN_BALLOON is not set
+
+# TI Keystone
+CONFIG_KEYSTONE_USB_PHY=m
+CONFIG_USB_DWC3_KEYSTONE=m
+CONFIG_GPIO_DAVINCI=y
+CONFIG_I2C_DAVINCI=m
+CONFIG_TI_AEMIF=m
+CONFIG_POWER_RESET_KEYSTONE=y
+CONFIG_DAVINCI_WATCHDOG=m
+CONFIG_SPI_DAVINCI=m
+CONFIG_TI_DAVINCI_MDIO=m
+CONFIG_KEYSTONE_IRQ=m
+CONFIG_PCI_KEYSTONE=y
+CONFIG_MTD_NAND_DAVINCI=m
+CONFIG_GPIO_SYSCON=m
+
+# Tegra (non A15 device options)
+# CONFIG_ARCH_TEGRA_2x_SOC is not set
+# CONFIG_ARCH_TEGRA_3x_SOC is not set
+# CONFIG_TEGRA20_MC is not set
+# CONFIG_TEGRA_IOMMU_GART is not set
+# CONFIG_SPI_TEGRA20_SFLASH is not set
+# CONFIG_SPI_TEGRA20_SLINK is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_NVEC is not set
+# CONFIG_SND_SOC_TEGRA_ALC5632 is not set
+# CONFIG_SND_SOC_TEGRA_TRIMSLICE is not set
+# CONFIG_SND_SOC_TEGRA_WM8753 is not set
+# CONFIG_SND_SOC_TEGRA_WM8903 is not set
+# CONFIG_SND_SOC_TEGRA_WM9712 is not set
+# CONFIG_SND_SOC_TEGRA20_AC97 is not set
+# CONFIG_SND_SOC_TEGRA20_DAS is not set
+# CONFIG_SND_SOC_TEGRA20_SPDIF is not set

config-debug

@@ -0,0 +1,130 @@
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_LOCK_TORTURE_TEST=m
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_PROVE_RCU=y
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+CONFIG_DEBUG_PER_CPU_MAPS=y
+CONFIG_CPUMASK_OFFSTACK=y
+
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_FAIL_IO_TIMEOUT=y
+CONFIG_FAIL_MMC_REQUEST=y
+
+CONFIG_LOCK_STAT=y
+
+CONFIG_DEBUG_STACK_USAGE=y
+
+CONFIG_ACPI_DEBUG=y
+
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_PI_LIST=y
+
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+
+CONFIG_X86_PTDUMP=y
+CONFIG_ARM64_PTDUMP=y
+CONFIG_EFI_PGT_DUMP=y
+
+CONFIG_CAN_DEBUG_DEVICES=y
+
+CONFIG_MODULE_FORCE_UNLOAD=y
+
+
+CONFIG_DEBUG_NOTIFIERS=y
+
+CONFIG_DMA_API_DEBUG=y
+
+CONFIG_MMIOTRACE=y
+
+CONFIG_DEBUG_CREDENTIALS=y
+
+CONFIG_EXT4_DEBUG=y
+
+CONFIG_XFS_WARN=y
+
+CONFIG_DEBUG_PERF_USE_VMALLOC=y
+
+# off in both production debug and nodebug builds,
+#  on in rawhide nodebug builds
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+
+CONFIG_JBD2_DEBUG=y
+
+CONFIG_NFSD_FAULT_INJECTION=y
+
+CONFIG_DEBUG_BLK_CGROUP=y
+
+CONFIG_DRBD_FAULT_INJECTION=y
+
+CONFIG_ATH_DEBUG=y
+CONFIG_CARL9170_DEBUGFS=y
+CONFIG_IWLWIFI_DEVICE_TRACING=y
+
+CONFIG_RTLWIFI_DEBUG=y
+
+CONFIG_DEBUG_OBJECTS_WORK=y
+
+CONFIG_DMADEVICES_DEBUG=y
+CONFIG_DMADEVICES_VDEBUG=y
+
+CONFIG_PM_ADVANCED_DEBUG=y
+
+CONFIG_CEPH_LIB_PRETTYDEBUG=y
+CONFIG_QUOTA_DEBUG=y
+
+
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+CONFIG_KDB_DEFAULT_ENABLE=0x1
+CONFIG_KDB_CONTINUE_CATASTROPHIC=0
+
+CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
+CONFIG_PERCPU_TEST=m
+CONFIG_TEST_LIST_SORT=y
+CONFIG_TEST_STRING_HELPERS=m
+
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
+# CONFIG_DEBUG_KMEMLEAK_TEST is not set
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
+
+CONFIG_MAC80211_MESSAGE_TRACING=y
+
+CONFIG_EDAC_DEBUG=y
+
+CONFIG_SPI_DEBUG=y
+
+CONFIG_X86_DEBUG_STATIC_CPU_HAS=y
+CONFIG_LATENCYTOP=y
+CONFIG_SCHEDSTATS=y

config-i686-PAE

@@ -0,0 +1,8 @@
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_SYS_HYPERVISOR=y
+
+# I2O only works on non-PAE 32-bit x86
+# CONFIG_I2O is not set

config-no-extra

@@ -0,0 +1,27 @@
+### config-no-extra: only (to a first approximation) modules listed in
+###   mod-extra.list should be listed here. 
+
+# CONFIG_ISDN is not set
+# CONFIG_RDS is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATALK is not set
+# CONFIG_HAMRADIO is not set
+
+# CONFIG_DEV_APPLETALK is not set
+
+# CONFIG_FUSION is not set
+# CONFIG_I2O is not set
+
+# CONFIG_NET_TULIP is not set
+
+# CONFIG_HERMES is not set
+
+# CONFIG_OCFS2_FS is not set
+# CONFIG_CUSE is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set

config-nodebug

@@ -0,0 +1,132 @@
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_CPUMASK_OFFSTACK=y
+
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
+
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FAILSLAB is not set
+# CONFIG_FAIL_PAGE_ALLOC is not set
+# CONFIG_FAIL_MAKE_REQUEST is not set
+# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
+# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
+# CONFIG_FAIL_IO_TIMEOUT is not set
+# CONFIG_FAIL_MMC_REQUEST is not set
+
+# CONFIG_LOCK_STAT is not set
+
+# CONFIG_DEBUG_STACK_USAGE is not set
+
+# CONFIG_ACPI_DEBUG is not set
+
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_PI_LIST is not set
+
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
+# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+
+CONFIG_X86_PTDUMP=y
+# CONFIG_ARM64_PTDUMP is not set
+# CONFIG_EFI_PGT_DUMP is not set
+
+# CONFIG_CAN_DEBUG_DEVICES is not set
+
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+
+
+# CONFIG_DEBUG_NOTIFIERS is not set
+
+# CONFIG_DMA_API_DEBUG is not set
+
+# CONFIG_MMIOTRACE is not set
+
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+# off in both production debug and nodebug builds,
+#  on in rawhide nodebug builds
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+
+# CONFIG_EXT4_DEBUG is not set
+
+# CONFIG_XFS_WARN is not set
+
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+
+# CONFIG_JBD2_DEBUG is not set
+
+# CONFIG_NFSD_FAULT_INJECTION is not set
+
+# CONFIG_DEBUG_BLK_CGROUP is not set
+
+# CONFIG_DRBD_FAULT_INJECTION is not set
+
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_CARL9170_DEBUGFS is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+
+# CONFIG_RTLWIFI_DEBUG is not set
+
+# CONFIG_DEBUG_OBJECTS_WORK is not set
+
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_DMADEVICES_VDEBUG is not set
+
+CONFIG_PM_ADVANCED_DEBUG=y
+
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_QUOTA_DEBUG is not set
+
+
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_DEFAULT_ENABLE=0x0
+CONFIG_KDB_KEYBOARD=y
+CONFIG_KDB_CONTINUE_CATASTROPHIC=0
+
+# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+
+# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
+
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
+# CONFIG_DEBUG_KMEMLEAK_TEST is not set
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
+
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+
+# CONFIG_EDAC_DEBUG is not set
+
+# CONFIG_SPI_DEBUG is not set
+
+# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
+
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_LATENCYTOP is not set
+

config-powerpc-generic

@@ -0,0 +1,369 @@
+# Most PowerPC kernels we build are SMP
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC=y
+CONFIG_WATCHDOG_RTAS=m
+CONFIG_DEBUGGER=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_ALTIVEC=y
+
+CONFIG_TAU=y
+# CONFIG_TAU_INT is not set
+CONFIG_TAU_AVERAGE=y
+
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_GEN_RTC_X is not set
+CONFIG_RTC_DRV_GENERIC=y
+# CONFIG_CMDLINE_BOOL is not set
+
+CONFIG_ADB=y
+CONFIG_ADB_PMU=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM112=y
+CONFIG_I2C_POWERMAC=y
+CONFIG_APPLE_AIRPORT=m
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+CONFIG_AGP_UNINORTH=y
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_G=y
+# CONFIG_FB_VGA16 is not set
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_RIVA_BACKLIGHT=y
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+# CONFIG_FB_MB862XX_LIME is not set
+# CONFIG_FB_MB862XX_I2C is not set
+
+
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+# CONFIG_SND_SOC is not set
+
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+
+CONFIG_BOOTX_TEXT=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_CAPI_EICON=y
+
+CONFIG_NVRAM=y
+
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_NI65 is not set
+# CONFIG_LANCE is not set
+# CONFIG_3C515 is not set
+
+CONFIG_MEMORY_HOTPLUG=y
+
+# Stuff which wants bus_to_virt() or virt_to_bus()
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+
+
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+
+CONFIG_PPC_EFIKA=y
+CONFIG_PPC_MEDIA5200=y
+
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PMAC_RACKMETER=m
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+
+CONFIG_SENSORS_AMS=m
+CONFIG_SENSORS_AMS_PMU=y
+CONFIG_SENSORS_AMS_I2C=y
+
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_IDE_PMAC is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_DELKIN=m
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_MTD_PHYSMAP_OF=m
+CONFIG_IDE_PROC_FS=y
+CONFIG_MACINTOSH_DRIVERS=y
+
+CONFIG_PPC_PASEMI_MDIO=m
+CONFIG_SPU_FS_64K_LS=y
+CONFIG_PPC_PASEMI_CPUFREQ=y
+CONFIG_PMAC_APM_EMU=m
+CONFIG_HW_RANDOM_PASEMI=m
+
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_PASEMI=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_EDAC_LEGACY_SYSFS=y
+
+# CONFIG_AXON_RAM is not set
+# CONFIG_OPROFILE_CELL is not set
+
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+
+# CONFIG_MPC5121_ADS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_THERMAL=y
+
+# CONFIG_MEMORY_HOTREMOVE is not set
+
+CONFIG_DMADEVICES=y
+# CONFIG_FSL_DMA is not set
+
+CONFIG_SND_PPC=y
+
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_RAPIDIO is not set
+# CONFIG_FS_ENET is not set
+# CONFIG_UCC_GETH is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_QE is not set
+# CONFIG_I2C_CPM is not set
+
+CONFIG_NET_VENDOR_IBM=y
+
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+
+# CONFIG_PPC_SMLPAR is not set
+
+# CONFIG_MGCOGE is not set
+# CONFIG_GEF_SBC610 is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
+
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_QE_GPIO is not set
+
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_IDE_GD_ATAPI=y
+
+# CONFIG_MCU_MPC8349EMITX is not set
+
+# CONFIG_GPIO_XILINX is not set
+
+CONFIG_PMIC_DA903X=y
+CONFIG_BACKLIGHT_DA903X=m
+CONFIG_LEDS_DA903X=m
+
+CONFIG_MSI_BITMAP_SELFTEST=y
+
+CONFIG_RELOCATABLE=y
+
+# CONFIG_HVC_UDBG is not set
+CONFIG_PRINT_STACK_DEPTH=64
+
+CONFIG_BATTERY_DA9030=m
+# CONFIG_TWL4030_CORE is not set
+
+CONFIG_BLK_DEV_IT8172=m
+CONFIG_TOUCHSCREEN_DA9034=m
+
+CONFIG_SIMPLE_GPIO=y
+
+# CONFIG_FSL_PQ_MDIO is not set
+
+# CONFIG_PS3_VRAM is not set
+CONFIG_MDIO_GPIO=m
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+
+# CONFIG_USB_FHCI_HCD is not set
+# CONFIG_FHCI_DEBUG is not set
+
+# CONFIG_AMIGAONE is not set
+
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+
+CONFIG_DTL=y
+
+CONFIG_MMC_SDHCI_OF=m
+
+# CONFIG_CONSISTENT_SIZE_BOOL is not set
+
+
+CONFIG_PPC_EMULATED_STATS=y
+
+CONFIG_SWIOTLB=y
+
+# CONFIG_RDS is not set
+
+CONFIG_PPC_DISABLE_WERROR=y
+
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XILINX_EMACLITE is not set
+
+CONFIG_GPIO_WM831X=m
+# CONFIG_GPIO_UCB1400 is not set
+# CONFIG_EDAC_MPC85XX is not set
+
+CONFIG_NR_IRQS=512
+CONFIG_SPARSE_IRQ=y
+
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
+# CONFIG_CAN_MSCAN is not set
+# CONFIG_CAN_MPC5XXX is not set
+CONFIG_PATA_MACIO=y
+CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
+# CONFIG_MMC_SDHCI_OF_ESDHC is not set
+# CONFIG_MMC_SDHCI_OF_HLWD is not set
+
+# CONFIG_MFD_AAT2870_CORE is not set
+
+# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_74XX_MMIO is not set
+
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_RTC_DRV_MPC5121 is not set
+
+# CONFIG_MPC512X_DMA is not set
+
+CONFIG_KVM_GUEST=y
+
+CONFIG_I2C_MPC=m
+
+# CONFIG_IMA is not set
+# CONFIG_TCG_TPM is not set
+
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_SHA1_PPC is not set
+
+# CONFIG_CAN_FLEXCAN is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
+# CONFIG_IBM_EMAC is not set
+# CONFIG_NET_VENDOR_PASEMI is not set
+# CONFIG_NET_VENDOR_TOSHIBA is not set
+
+# CONFIG_CPU_IDLE is not set
+# CONFIG_OF_UNITTEST is not set
+# CONFIG_OF_SELFTEST is not set
+# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+
+CONFIG_RCU_FANOUT_LEAF=16
+
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+# CONFIG_MPIC_MSGR is not set
+# CONFIG_FA_DUMP is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+
+# CONFIG_FAIL_IOMMU is not set
+# CONFIG_SPAPR_TCE_IOMMU is not set
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+
+CONFIG_PPC_DENORMALISATION=y
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_FB_SSD1307=m
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=n
+
+CONFIG_XZ_DEC_POWERPC=y
+
+CONFIG_CRASH=m

config-powerpc64

@@ -0,0 +1,187 @@
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM121=y
+CONFIG_WINDFARM_PM72=y
+CONFIG_WINDFARM_RM31=y
+
+CONFIG_PPC_PMAC64=y
+CONFIG_PPC_MAPLE=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+CONFIG_PPC_PSERIES=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_POWERNV=y
+CONFIG_PPC_POWERNV_RTAS=y
+CONFIG_SENSORS_IBMPOWERNV=y
+CONFIG_HW_RANDOM_POWERNV=m
+CONFIG_POWERNV_CPUFREQ=m
+CONFIG_IPMI_POWERNV=m
+CONFIG_SCOM_DEBUGFS=y
+# CONFIG_PPC_PASEMI is not set
+# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
+# CONFIG_PPC_PS3 is not set
+# CONFIG_PPC_CELLEB is not set
+# CONFIG_PPC_CELL_QPACE is not set
+CONFIG_PMAC_RACKMETER=m
+CONFIG_IBMEBUS=y
+CONFIG_RTAS_FLASH=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_PPC_SPLPAR=y
+CONFIG_SCANLOG=y
+CONFIG_LPARCFG=y
+CONFIG_SERIAL_ICOM=m
+CONFIG_HVCS=m
+CONFIG_HVC_CONSOLE=y
+# CONFIG_HVC_OLD_HVSI is not set
+CONFIG_HOTPLUG_PCI=y
+CONFIG_THERM_PM72=y
+CONFIG_IBMVETH=m
+CONFIG_SCSI_IBMVSCSI=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+CONFIG_HOTPLUG_PCI_RPA=m
+CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_PMAC_SMU=y
+CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_CPU_FREQ_MAPLE=y
+CONFIG_SCSI_IPR=m
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+CONFIG_HVC_RTAS=y
+CONFIG_HVC_OPAL=y
+
+# iSeries device drivers
+#
+
+CONFIG_PASEMI_MAC=m
+CONFIG_SERIAL_OF_PLATFORM=m
+
+CONFIG_SERIAL_TXX9=y
+CONFIG_SERIAL_TXX9_NR_UARTS=6
+CONFIG_SERIAL_TXX9_CONSOLE=y
+
+CONFIG_HVC_BEAT=y
+
+CONFIG_PPC_PMI=m
+
+CONFIG_PATA_SCC=m
+
+CONFIG_APM_EMULATION=m
+
+CONFIG_PPC64=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_NR_CPUS=1024
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+
+
+CONFIG_RTAS_PROC=y
+CONFIG_NUMA=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+CONFIG_PPC_64K_PAGES=y
+CONFIG_PPC_SUBPAGE_PROT=y
+CONFIG_SCHED_SMT=y
+
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+
+CONFIG_MEMORY_HOTREMOVE=y
+
+CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
+
+CONFIG_CGROUP_HUGETLB=y
+
+# CONFIG_MV643XX_ETH is not set
+CONFIG_IRQSTACKS=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_INPUT_PCSPKR is not set
+
+CONFIG_EHEA=m
+CONFIG_INFINIBAND_EHCA=m
+
+# CONFIG_HCALL_STATS is not set
+
+CONFIG_XMON_DISASSEMBLY=y
+
+
+# CONFIG_TUNE_CELL is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+
+CONFIG_EDAC_CPC925=m
+CONFIG_FRAME_WARN=2048
+
+CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_VIRTUALIZATION=y
+
+CONFIG_VSX=y
+
+CONFIG_SCSI_IBMVFC=m
+# CONFIG_SCSI_IBMVFC_TRACE is not set
+CONFIG_IBM_BSR=m
+
+CONFIG_CRASH_DUMP=y
+CONFIG_FA_DUMP=y
+CONFIG_RELOCATABLE=y
+
+CONFIG_RCU_FANOUT=64
+
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+CONFIG_CMA_AREAS=7
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=m
+CONFIG_KVM_BOOK3S_64_PR=m
+# CONFIG_KVM_EXIT_TIMING is not set
+CONFIG_KVM_XICS=y
+
+#-- bz#607175
+#-- active memory sharing
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
+CONFIG_HV_PERF_CTRS=y
+#-- DLPAR memory remove
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+# CONFIG_COMPACTION is not set
+
+CONFIG_PSERIES_ENERGY=m
+
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_PSERIES_CPUIDLE=y
+CONFIG_POWERNV_CPUIDLE=y
+
+CONFIG_PPC_ICSWX=y
+CONFIG_IO_EVENT_IRQ=y
+CONFIG_HW_RANDOM_AMD=m
+
+CONFIG_UIO_PDRV=m
+
+CONFIG_I2C_OPAL=m
+CONFIG_RTC_DRV_OPAL=m
+
+CONFIG_HW_RANDOM_PSERIES=m
+CONFIG_CRYPTO_DEV_NX=y
+CONFIG_CRYPTO_842=m
+CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CRYPTO_DEV_NX_COMPRESS=m
+
+CONFIG_CXL=m
+
+# CONFIG_PPC_ICSWX_PID is not set
+# CONFIG_PPC_ICSWX_USE_SIGILL is not set
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PPC_TRANSACTIONAL_MEM is not set
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_BLK_DEV_RSXX=m
+
+# CONFIG_CARL9170 is not set

config-powerpc64le

@@ -0,0 +1 @@
+CONFIG_CPU_LITTLE_ENDIAN=y

config-powerpc64p7

@@ -0,0 +1,174 @@
+CONFIG_POWER7_CPU=y
+# CONFIG_PPC_PMAC64 is not set
+# CONFIG_PPC_MAPLE is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+CONFIG_PPC_PSERIES=y
+# CONFIG_PPC_PMAC is not set
+CONFIG_PPC_POWERNV=y
+CONFIG_PPC_POWERNV_RTAS=y
+CONFIG_HW_RANDOM_POWERNV=m
+CONFIG_SENSORS_IBMPOWERNV=y
+CONFIG_POWERNV_CPUFREQ=m
+CONFIG_IPMI_POWERNV=m
+CONFIG_SCOM_DEBUGFS=y
+# CONFIG_PPC_PASEMI is not set
+# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
+# CONFIG_PPC_PS3 is not set
+# CONFIG_PPC_CELLEB is not set
+# CONFIG_PPC_CELL_QPACE is not set
+CONFIG_IBMEBUS=y
+CONFIG_RTAS_FLASH=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_PPC_SPLPAR=y
+CONFIG_SCANLOG=y
+CONFIG_LPARCFG=y
+CONFIG_SERIAL_ICOM=m
+CONFIG_HVCS=m
+CONFIG_HVC_CONSOLE=y
+# CONFIG_HVC_OLD_HVSI is not set
+CONFIG_HOTPLUG_PCI=y
+CONFIG_THERM_PM72=y
+CONFIG_IBMVETH=m
+CONFIG_SCSI_IBMVSCSI=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+CONFIG_HOTPLUG_PCI_RPA=m
+CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_SCSI_IPR=m
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+CONFIG_HVC_RTAS=y
+CONFIG_HVC_OPAL=y
+
+# iSeries device drivers
+#
+
+CONFIG_SERIAL_OF_PLATFORM=m
+
+CONFIG_SERIAL_TXX9=y
+CONFIG_SERIAL_TXX9_NR_UARTS=6
+CONFIG_SERIAL_TXX9_CONSOLE=y
+
+CONFIG_HVC_BEAT=y
+
+CONFIG_PPC_PMI=m
+
+CONFIG_PATA_SCC=m
+
+CONFIG_APM_EMULATION=m
+
+CONFIG_PPC64=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_NR_CPUS=1024
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+
+
+CONFIG_RTAS_PROC=y
+CONFIG_NUMA=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+CONFIG_PPC_64K_PAGES=y
+CONFIG_PPC_SUBPAGE_PROT=y
+CONFIG_SCHED_SMT=y
+
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+
+CONFIG_MEMORY_HOTREMOVE=y
+
+CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
+
+CONFIG_CGROUP_HUGETLB=y
+
+# CONFIG_MV643XX_ETH is not set
+CONFIG_IRQSTACKS=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_INPUT_PCSPKR is not set
+
+CONFIG_EHEA=m
+CONFIG_INFINIBAND_EHCA=m
+
+# CONFIG_HCALL_STATS is not set
+
+CONFIG_XMON_DISASSEMBLY=y
+
+
+# CONFIG_TUNE_CELL is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+
+CONFIG_EDAC_CPC925=m
+CONFIG_FRAME_WARN=2048
+
+CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_VIRTUALIZATION=y
+
+CONFIG_VSX=y
+
+CONFIG_SCSI_IBMVFC=m
+# CONFIG_SCSI_IBMVFC_TRACE is not set
+CONFIG_IBM_BSR=m
+
+CONFIG_CRASH_DUMP=y
+CONFIG_FA_DUMP=y
+CONFIG_RELOCATABLE=y
+
+CONFIG_RCU_FANOUT=64
+
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+CONFIG_CMA_AREAS=7
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=m
+CONFIG_KVM_BOOK3S_64_PR=m
+# CONFIG_KVM_EXIT_TIMING is not set
+CONFIG_KVM_XICS=y
+
+#-- bz#607175
+#-- active memory sharing
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
+CONFIG_HV_PERF_CTRS=y
+#-- DLPAR memory remove
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+# CONFIG_COMPACTION is not set
+
+CONFIG_PSERIES_ENERGY=m
+
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_PSERIES_CPUIDLE=y
+CONFIG_POWERNV_CPUIDLE=y
+
+CONFIG_PPC_ICSWX=y
+CONFIG_IO_EVENT_IRQ=y
+CONFIG_HW_RANDOM_AMD=m
+
+CONFIG_UIO_PDRV=m
+
+CONFIG_I2C_OPAL=m
+CONFIG_RTC_DRV_OPAL=m
+
+CONFIG_HW_RANDOM_PSERIES=m
+CONFIG_CRYPTO_DEV_NX=y
+CONFIG_CRYPTO_842=m
+CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CRYPTO_DEV_NX_COMPRESS=m
+
+CONFIG_CXL=m
+
+# CONFIG_PPC_ICSWX_PID is not set
+# CONFIG_PPC_ICSWX_USE_SIGILL is not set
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_BLK_DEV_RSXX=m

config-s390x

@@ -0,0 +1,312 @@
+CONFIG_64BIT=y
+# CONFIG_MARCH_G5 is not set
+# CONFIG_MARCH_Z900 is not set
+CONFIG_MARCH_Z9_109=y
+# CONFIG_MARCH_Z990 is not set
+
+CONFIG_NR_CPUS=64
+CONFIG_COMPAT=y
+
+# See bug 496596
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# See bug 496605
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+CONFIG_LOG_BUF_SHIFT=16
+
+#
+# I/O subsystem configuration
+#
+CONFIG_QDIO=m
+
+#
+# Misc
+#
+CONFIG_IPL=y
+CONFIG_PFAULT=y
+CONFIG_SHARED_KERNEL=y
+CONFIG_CMM=m
+# CONFIG_NETIUCV is not set
+CONFIG_SMSGIUCV=m
+CONFIG_CRASH_DUMP=y
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ZFCP=m
+CONFIG_CCW=y
+
+#
+# S/390 block device drivers
+#
+CONFIG_DCSSBLK=m
+CONFIG_BLK_DEV_XPRAM=m
+CONFIG_DASD=m
+CONFIG_DASD_PROFILE=y
+CONFIG_DASD_ECKD=m
+CONFIG_DASD_FBA=m
+CONFIG_DASD_DIAG=m
+CONFIG_DASD_EER=y
+
+#
+# S/390 character device drivers
+#
+CONFIG_TN3270=y
+CONFIG_TN3270_CONSOLE=y
+CONFIG_TN3215=y
+CONFIG_TN3215_CONSOLE=y
+CONFIG_CCW_CONSOLE=y
+CONFIG_SCLP_TTY=y
+CONFIG_SCLP_CONSOLE=y
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_SCLP_CPI=m
+CONFIG_SCLP_ASYNC=m
+CONFIG_SCLP_ASYNC_ID="000000000"
+CONFIG_S390_TAPE=m
+CONFIG_S390_TAPE_3590=m
+
+CONFIG_APPLDATA_BASE=y
+CONFIG_APPLDATA_MEM=m
+CONFIG_APPLDATA_OS=m
+CONFIG_APPLDATA_NET_SUM=m
+CONFIG_TN3270_TTY=y
+CONFIG_TN3270_FS=m
+
+
+#
+# S/390 tape interface support
+#
+
+#
+# S/390 tape hardware support
+#
+CONFIG_S390_TAPE_34XX=m
+
+# CONFIG_SLIP is not set
+
+#
+# Token Ring devices
+#
+CONFIG_TR=y
+CONFIG_NETCONSOLE=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# S/390 network device drivers
+#
+CONFIG_LCS=m
+CONFIG_CTC=m
+CONFIG_IUCV=m
+CONFIG_QETH=m
+CONFIG_QETH_IPV6=y
+CONFIG_CCWGROUP=m
+
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_B44 is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_OSF_PARTITION is not set
+CONFIG_IBM_PARTITION=y
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+
+
+#
+# S390 crypto hw
+#
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+
+#
+# Kernel hacking
+#
+
+#
+# S390 specific stack options; needs gcc 3.5 so off for now
+#
+CONFIG_PACK_STACK=y
+CONFIG_CHECK_STACK=y
+
+CONFIG_DIAG288_WATCHDOG=m
+CONFIG_VMLOGRDR=m
+CONFIG_MONREADER=m
+
+CONFIG_VIRT_CPU_ACCOUNTING=y
+
+# CONFIG_CLAW is not set
+
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MII is not set
+
+
+CONFIG_STACK_GUARD=256
+CONFIG_CMM_IUCV=y
+
+
+CONFIG_S390_HYPFS_FS=y
+
+CONFIG_MONWRITER=m
+CONFIG_ZCRYPT=m
+
+CONFIG_AFIUCV=m
+CONFIG_S390_PRNG=m
+
+CONFIG_S390_VMUR=m
+
+# CONFIG_THERMAL is not set
+
+CONFIG_CTCM=m
+CONFIG_QETH_L2=m
+CONFIG_QETH_L3=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+# CONFIG_KVM_S390_UCONTROL is not set
+CONFIG_S390_GUEST=y
+CONFIG_VIRTIO_CONSOLE=y
+
+
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_CHSC_SCH=m
+
+# drivers/isdn/hardware/mISDN/hfcmulti.c:5255:2: error: #error "not running on big endian machines now"
+# CONFIG_MISDN_HFCMULTI is not set
+
+CONFIG_HVC_IUCV=y
+
+CONFIG_RCU_FANOUT=64
+CONFIG_RCU_FANOUT_LEAF=16
+
+# CONFIG_SUSPEND is not set
+
+CONFIG_SMSGIUCV_EVENT=m
+
+# CONFIG_PREEMPT_TRACER is not set
+
+CONFIG_VMCP=y
+
+
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_BOOK=y
+
+# CONFIG_WARN_DYNAMIC_STACK is not set
+
+CONFIG_CRYPTO_GHASH_S390=m
+
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+CONFIG_SCM_BUS=y
+CONFIG_EADM_SCH=m
+CONFIG_SCM_BLOCK=m
+CONFIG_SCM_BLOCK_CLUSTER_WRITE=y
+# CONFIG_S390_PTDUMP is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+CONFIG_PCI=y
+CONFIG_PCI_NR_FUNCTIONS=64
+CONFIG_PCI_NR_MSI=256
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_CPCI=y
+CONFIG_HOTPLUG_PCI_SHPC=y
+CONFIG_HOTPLUG_PCI_S390=y
+
+# CONFIG_NEW_LEDS is not set
+# CONFIG_HID is not set
+# CONFIG_MTD is not set
+
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_PARPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_FB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_FCOE is not set
+# CONFIG_FUSION is not set
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_SERIO is not set
+
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_STAGING is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_SOUND is not set
+# CONFIG_DW_DMAC is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_SMBUS is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_PTP_1588_CLOCK is not set
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
+# CONFIG_BCMA is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_VX855 is not set
+
+# CONFIG_PHYLIB is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_SH_ETH is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_IEEE802154_DRIVERS is not set
+
+# CONFIG_FMC is not set
+
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_EN_DCB=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+CONFIG_IRQ_DOMAIN_DEBUG=y
+
+CONFIG_CRASH=m

config-x86-32-generic

@@ -0,0 +1,219 @@
+# CONFIG_64BIT is not set
+
+# CONFIG_X86_32_NON_STANDARD is not set
+
+# CONFIG_X86_GOLDFISH is not set
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_RDC321X is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+CONFIG_M686=y
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_STA2X11 is not set
+
+CONFIG_NR_CPUS=32
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_PPRO_FENCE is not set
+
+CONFIG_TOSHIBA=m
+
+CONFIG_SONYPI=m
+CONFIG_SONYPI_COMPAT=y
+
+# CONFIG_NUMA is not set
+
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+
+# CONFIG_MATH_EMULATION is not set
+
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
+
+CONFIG_FB_SSD1307=m
+
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_GOANY=y
+
+CONFIG_IBM_ASM=m
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
+
+
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+# CONFIG_X86_GX_SUSPMOD is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+# e_powersaver is dangerous
+# CONFIG_X86_E_POWERSAVER is not set
+
+CONFIG_X86_HT=y
+
+
+# CONFIG_4KSTACKS is not set
+
+CONFIG_PCI_DIRECT=y
+
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+
+# SHPC has half-arsed PCI probing, which makes it load on too many systems
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+
+CONFIG_SCx200_ACB=m
+
+# CONFIG_X86_REBOOTFIXUPS is not set
+
+CONFIG_PC8736x_GPIO=m
+# CONFIG_NSC_GPIO is not set
+CONFIG_GPIO_SCH=m
+
+CONFIG_HW_RANDOM_GEODE=m
+
+CONFIG_TC1100_WMI=m
+
+CONFIG_IB700_WDT=m
+
+CONFIG_PHYSICAL_ALIGN=0x400000
+CONFIG_PHYSICAL_START=0x400000
+
+# CONFIG_KEXEC_JUMP is not set
+
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_TWOFISH_586=m
+
+CONFIG_VIDEO_CAFE_CCIC=m
+
+CONFIG_XEN_MAX_DOMAIN_MEMORY=8
+
+CONFIG_MTD_NAND_CAFE=m
+
+CONFIG_LBDAF=y
+
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+
+
+CONFIG_OLPC=y
+CONFIG_BATTERY_OLPC=y
+CONFIG_MOUSE_PS2_OLPC=y
+CONFIG_OLPC_XO1_PM=y
+CONFIG_OLPC_XO15_SCI=y
+CONFIG_OLPC_XO1_RTC=y
+CONFIG_OLPC_XO1_SCI=y
+# CONFIG_ALIX is not set
+# staging
+# CONFIG_FB_OLPC_DCON is not set
+
+# CONFIG_SPARSE_IRQ is not set
+
+CONFIG_RCU_FANOUT=32
+
+# CONFIG_X86_ANCIENT_MCE is not set
+
+
+CONFIG_I2C_PXA=m
+
+# CONFIG_INTEL_TXT is not set
+
+CONFIG_GEODE_WDT=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+
+CONFIG_LEDS_INTEL_SS4200=m
+
+CONFIG_OLPC_XO1=m
+CONFIG_XO1_RFKILL=m
+
+CONFIG_X86_32_IRIS=m
+
+CONFIG_POWER_RESET_GPIO=y
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+
+
+
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP_OF=m
+CONFIG_SERIAL_OF_PLATFORM=m
+CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
+# CONFIG_MMC_SDHCI_OF is not set
+
+# CONFIG_X86_INTEL_MID is not set
+
+CONFIG_MFD_CS5535=m
+# CONFIG_MFD_SYSCON is not set
+
+# I2O enabled only for 32-bit x86, disabled for PAE kernel
+CONFIG_I2O=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_I2O_CONFIG=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG_OLD_IOCTL=y
+CONFIG_I2O_BUS=m
+
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_BACKLIGHT_PWM=m
+
+# CONFIG_EDAC_SBRIDGE is not set
+
+# CONFIG_OF_UNITTEST is not set
+# CONFIG_OF_SELFTEST is not set
+# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_GEOS is not set
+# CONFIG_NET5501 is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_GPIO_SODAVILLE is not set
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_BACKLIGHT_OT200 is not set
+
+# CONFIG_MLX5_INFINIBAND is not set
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PINCTRL_BCM281XX is not set
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_QCOM is not set

config-x86-generic

@@ -0,0 +1,550 @@
+CONFIG_UID16=y
+
+CONFIG_X86_EXTENDED_PLATFORM=y
+
+CONFIG_X86_GENERIC=y
+
+CONFIG_HPET=y
+CONFIG_HPET_TIMER=y
+# CONFIG_HPET_MMAP is not set
+
+CONFIG_I8K=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_EARLY=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_INTEL_EARLY=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_AMD_EARLY=y
+
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
+CONFIG_EDD=m
+# CONFIG_EDD_OFF is not set
+
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+
+# CONFIG_NET_SB1000 is not set
+
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_X86_PM_TIMER=y
+
+# This requires changes to binutils and the compiler.  Plus you can't actually
+# buy hardware with MPX yet.  So... leave it off until all of that seems set.
+# CONFIG_X86_INTEL_MPX is not set
+
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+# CONFIG_EFI_MIXED is not set
+CONFIG_EFI_VARS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_EFI_VARS_PSTORE=y
+CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
+CONFIG_EFI_PCDP=y
+CONFIG_FB_EFI=y
+CONFIG_EARLY_PRINTK_EFI=y
+CONFIG_EFI_RUNTIME_MAP=y
+# needs FB_SIMPLE to work correctly
+# CONFIG_X86_SYSFB is not set
+
+# FIXME: 32bit only?
+# CONFIG_FB_N411 is not set
+
+CONFIG_INTEL_IOMMU=y
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_SCSI_ADVANSYS=m
+
+CONFIG_CAPI_EICON=y
+
+#
+# Kernel debugging
+#
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_MMIOTRACE_TEST is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
+# FIXME: Next two are deprecated. Remove them when they disappear upstream
+# CONFIG_ACPI_PROCFS_POWER is not set
+CONFIG_PNPACPI=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+# CONFIG_ACPI_APEI_EINJ is not set
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+CONFIG_ACPI_BGRT=y
+# CONFIG_ACPI_EXTLOG is not set
+
+# CONFIG_PMIC_OPREGION is not set
+
+CONFIG_X86_INTEL_PSTATE=y
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ_CPB=y
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_AMD_FREQ_SENSITIVITY=m
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+
+#
+# various x86 specific drivers
+#
+CONFIG_NVRAM=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_CCP=y
+CONFIG_CRYPTO_DEV_CCP_DD=m
+CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
+CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
+
+CONFIG_GENERIC_ISA_DMA=y
+
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_IOAPIC=y
+
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+
+CONFIG_BLK_DEV_AMD74XX=y
+
+# I2C_ACPI casues I2C to be built in.  This should probably be fixed.
+CONFIG_I2C=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_ISMT=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
+
+#rhbz 997149
+# CONFIG_DELL_RBU is not set
+CONFIG_DCDBAS=m
+
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
+CONFIG_EDAC_AMD64=m
+CONFIG_EDAC_AMD76X=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_E7XXX=m
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82860=m
+CONFIG_EDAC_I82875P=m
+CONFIG_EDAC_I82975X=m
+CONFIG_EDAC_I3000=m
+CONFIG_EDAC_I3200=m
+CONFIG_EDAC_I5000=m
+CONFIG_EDAC_I5100=m
+CONFIG_EDAC_I5400=m
+CONFIG_EDAC_I7300=m
+CONFIG_EDAC_I7CORE=m
+CONFIG_EDAC_R82600=m
+CONFIG_EDAC_X38=m
+CONFIG_EDAC_MCE_INJ=m
+CONFIG_EDAC_DECODE_MCE=m
+CONFIG_EDAC_LEGACY_SYSFS=y
+CONFIG_EDAC_IE31200=m
+
+CONFIG_SCHED_MC=y
+
+CONFIG_TCG_INFINEON=m
+
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+
+# CONFIG_COMPAT_VDSO is not set
+
+CONFIG_X86_PLATFORM_DEVICES=y
+
+CONFIG_AMILO_RFKILL=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CHROMEOS_LAPTOP=m
+CONFIG_CHROMEOS_PSTORE=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_FUJITSU_TABLET=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_TOPSTAR_LAPTOP=m
+
+CONFIG_ACPI_WMI=m
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ALIENWARE_WMI=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_HP_WIRELESS=m
+CONFIG_HP_WMI=m
+# CONFIG_INTEL_SCU_IPC is not set
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_DELL_SMO8800=m
+CONFIG_EEEPC_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+CONFIG_XO15_EBOOK=m
+CONFIG_INTEL_RST=m
+CONFIG_INTEL_SMARTCONNECT=y
+CONFIG_PVPANIC=m
+
+# CONFIG_TOUCHSCREEN_INTEL_MID is not set
+CONFIG_TOUCHSCREEN_GOODIX=m
+
+# CONFIG_SMSC37B787_WDT is not set
+CONFIG_VIA_WDT=m
+CONFIG_IE6XX_WDT=m
+
+CONFIG_CRASH_DUMP=y
+CONFIG_PROC_VMCORE=y
+CONFIG_CRASH=m
+
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_DEVICE_ASSIGNMENT=y
+CONFIG_LGUEST=m
+CONFIG_LGUEST_GUEST=y
+
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_PARAVIRT_TIME_ACCOUNTING=y
+# CONFIG_PARAVIRT_DEBUG is not set
+
+# PARAVIRT_SPINLOCKS has a 5% perf hit on native hw (see kconfig)
+# CONFIG_PARAVIRT_SPINLOCKS is not set
+
+CONFIG_KVM_GUEST=y
+CONFIG_KVM_MMU_AUDIT=y # default $x would be nice...
+# CONFIG_KVM_DEBUG_FS is not set
+
+CONFIG_XEN=y
+# CONFIG_XEN_DEBUG is not set
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_SAVE_RESTORE=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_XEN_WDT=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_DEBUG_FS=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
+CONFIG_XEN_SELFBALLOONING=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_ACPI_PROCESSOR=m
+# CONFIG_XEN_SCSI_FRONTEND is not set
+# CONFIG_XEN_SCSI_BACKEND is not set
+
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+CONFIG_THINKPAD_ACPI=m
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+
+CONFIG_MACINTOSH_DRIVERS=y
+
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+
+CONFIG_DMADEVICES=y
+CONFIG_INTEL_IOATDMA=m
+
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_I5500=m
+
+# CONFIG_CPA_DEBUG is not set
+
+CONFIG_HP_WATCHDOG=m
+CONFIG_NV_TCO=m
+CONFIG_SP5100_TCO=m
+
+# CONFIG_NO_BOOTMEM is not set
+
+# CONFIG_MEMTEST is not set
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_MAXSMP is not set
+
+
+CONFIG_HP_ILO=m
+
+CONFIG_BACKLIGHT_APPLE=m
+
+
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+
+# CONFIG_CMDLINE_BOOL is not set
+
+
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+
+
+# CONFIG_IOMMU_STRESS is not set
+
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_INJECT=m
+
+CONFIG_SFI=y
+
+CONFIG_I2C_SCMI=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+
+CONFIG_X86_DECODER_SELFTEST=y
+
+CONFIG_ACPI_CMPC=m
+CONFIG_MSI_WMI=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_TOSHIBA_HAPS=m
+
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+
+CONFIG_GPIO_ICH=m
+# CONFIG_GPIO_LYNXPOINT is not set
+# CONFIG_GPIO_F7188X is not set
+
+# These should all go away with IC2_ACPI is fixed
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_AXP20X is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+
+CONFIG_PCI_CNB20LE_QUIRK=y
+
+CONFIG_ACPI_EC_DEBUGFS=m
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+
+CONFIG_INTEL_IDLE=y
+
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+CONFIG_F71808E_WDT=m
+CONFIG_HPWDT_NMI_DECODING=y
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_INTEL_MID_DMAC is not set
+# CONFIG_GPIO_INTEL_MID is not set
+CONFIG_PCH_DMA=m
+CONFIG_INTEL_IPS=m
+# CONFIG_IBM_RTL is not set
+
+CONFIG_VIDEO_VIA_CAMERA=m
+
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_X86_RESERVE_LOW=64
+
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+
+CONFIG_PCH_GBE=m
+CONFIG_PCH_PHUB=m
+
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_CRC32_PCLMUL=m
+
+CONFIG_HP_ACCEL=m
+
+# CONFIG_RAPIDIO is not set
+
+CONFIG_SCHED_SMT=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR_STRONG=y
+CONFIG_RELOCATABLE=y
+# CONFIG_RANDOMIZE_BASE is not set # revisit this
+
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_BALLOON=m
+CONFIG_FB_HYPERV=m
+CONFIG_HYPERV_KEYBOARD=m
+
+# Depends on HOTPLUG_PCI_PCIE
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+
+CONFIG_DRM_GMA500=m
+# CONFIG_DRM_GMA600 is not set
+CONFIG_DRM_GMA3600=y
+
+CONFIG_RCU_FANOUT_LEAF=16
+
+CONFIG_INTEL_MEI=m
+CONFIG_INTEL_MEI_ME=m
+CONFIG_INTEL_MEI_TXE=m
+
+CONFIG_NFC_MEI_PHY=m
+CONFIG_NFC_PN544_MEI=m
+CONFIG_NFC_MICROREAD_MEI=m
+
+# Maybe enable in debug kernels?
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+# CONFIG_X86_GOLDFISH is not set
+
+CONFIG_X86_INTEL_LPSS=y
+CONFIG_IOSF_MBI=m
+# CONFIG_IOSF_MBI_DEBUG is not set
+CONFIG_PWM_LPSS=m
+CONFIG_PWM_LPSS_PCI=m
+CONFIG_PWM_LPSS_PLATFORM=m
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BAYTRAIL=y
+CONFIG_PINCTRL_CHERRYVIEW=m
+
+#baytrail/cherrytrail stuff
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_SOC_BUTTON_ARRAY=m
+CONFIG_SND_SOC_INTEL_SST=m
+CONFIG_SND_SOC_INTEL_SST_ACPI=m
+CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BAYTRAIL=m
+CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH=m
+CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH=m
+CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
+
+
+
+# CONFIG_INTEL_POWERCLAMP is not set
+CONFIG_X86_PKG_TEMP_THERMAL=m
+CONFIG_INTEL_SOC_DTS_THERMAL=m
+CONFIG_INT340X_THERMAL=m
+CONFIG_INTEL_RAPL=m
+
+CONFIG_VMWARE_VMCI=m
+CONFIG_VMWARE_VMCI_VSOCKETS=m
+
+CONFIG_XZ_DEC_X86=y
+
+CONFIG_MPILIB=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+# CONFIG_PKCS7_TEST_KEY is not set
+CONFIG_SIGNED_PE_FILE_VERIFICATION=y
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_SYSTEM_BLACKLIST_KEYRING=y
+CONFIG_MODULE_SIG=y
+CONFIG_MODULE_SIG_ALL=y
+# CONFIG_MODULE_SIG_SHA1 is not set
+CONFIG_MODULE_SIG_SHA256=y
+# CONFIG_MODULE_SIG_FORCE is not set
+CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE=y
+CONFIG_EFI_SIGNATURE_LIST_PARSER=y
+
+# CONFIG_KEXEC_FILE is not set
+# CONFIG_KEXEC_VERIFY_SIG is not set
+
+CONFIG_MODULE_SIG_UEFI=y
+
+CONFIG_VMXNET3=m
+CONFIG_VFIO_PCI_VGA=y
+
+# CONFIG_NTB is not set

config-x86_64-generic

@@ -0,0 +1,186 @@
+CONFIG_64BIT=y
+
+# CONFIG_X86_X32 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+CONFIG_GENERIC_CPU=y
+
+# CONFIG_X86_VSMP is not set
+CONFIG_X86_UV=y
+CONFIG_UV_MMTIMER=m
+CONFIG_NUMA=y
+CONFIG_AMD_NUMA=y
+CONFIG_X86_64_ACPI_NUMA=y
+# CONFIG_NUMA_EMU is not set
+# CONFIG_X86_NUMACHIP is not set
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+CONFIG_NUMA_BALANCING=y
+
+# https://lists.fedoraproject.org/pipermail/kernel/2013-November/004601.html
+CONFIG_NR_CPUS=1024
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_PHYSICAL_ALIGN=0x1000000
+
+# https://lists.fedoraproject.org/pipermail/kernel/2013-December/004753.html
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+
+CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_STATS=y
+CONFIG_AMD_IOMMU_V2=m
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_SWIOTLB=y
+# CONFIG_CALGARY_IOMMU is not set
+# CONFIG_GART_IOMMU is not set
+
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_MEM_SOFT_DIRTY=y
+
+CONFIG_KEXEC_JUMP=y
+CONFIG_KEXEC_FILE=y
+CONFIG_KEXEC_VERIFY_SIG=y
+CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
+
+CONFIG_ACPI_HOTPLUG_MEMORY=y
+
+# CONFIG_INTEL_SCU_IPC is not set
+
+CONFIG_INTEL_MIC_HOST=m
+CONFIG_INTEL_MIC_CARD=m
+CONFIG_INTEL_MIC_BUS=m
+CONFIG_INTEL_MIC_X100_DMA=m
+
+# SHPC has half-arsed PCI probing, which makes it load on too many systems
+CONFIG_HOTPLUG_PCI_SHPC=m
+
+# CONFIG_CRYPTO_SHA1_MB is not set
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
+CONFIG_CRYPTO_TWOFISH_X86_64=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256_SSSE3=m
+CONFIG_CRYPTO_SHA512_SSSE3=m
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+CONFIG_CRYPTO_CAMELLIA_X86_64=m
+CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
+CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
+CONFIG_CRYPTO_CAST5_AVX_X86_64=m
+CONFIG_CRYPTO_CAST6_AVX_X86_64=m
+CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
+CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
+CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
+CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
+CONFIG_CRYPTO_DES3_EDE_X86_64=m
+# staging crypto
+# CONFIG_CRYPTO_SKEIN is not set
+# CONFIG_CRYPTO_THREEFISH is not set
+
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+
+CONFIG_EDAC_AMD64=m
+# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
+CONFIG_EDAC_SBRIDGE=m
+
+# CONFIG_PC8736x_GPIO is not set
+
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+# CONFIG_MOVABLE_NODE is not set
+CONFIG_MEMORY_HOTPLUG=y
+# CONFIG_ARCH_MEMORY_PROBE is not set
+# CONFIG_MEMORY_HOTREMOVE is not set
+
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+
+CONFIG_SGI_IOC4=m
+CONFIG_SGI_XP=m
+CONFIG_SGI_GRU=m
+# CONFIG_SGI_GRU_DEBUG is not set
+
+# CONFIG_VIDEO_CAFE_CCIC is not set
+
+CONFIG_XEN_MAX_DOMAIN_MEMORY=128
+# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_SYS_HYPERVISOR=y
+# CONFIG_XEN_MCE_LOG is not set
+# CONFIG_XEN_STUB is not set
+# CONFIG_XEN_PVH is not set
+
+CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+
+CONFIG_FRAME_WARN=2048
+
+CONFIG_NODES_SHIFT=9
+
+CONFIG_DIRECT_GBPAGES=y
+
+CONFIG_X86_MPPARSE=y
+
+CONFIG_I7300_IDLE=m
+CONFIG_IRQ_REMAP=y
+
+CONFIG_X86_X2APIC=y
+CONFIG_SPARSE_IRQ=y
+
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_USER_QS is not set
+
+CONFIG_INTEL_TXT=y
+
+
+CONFIG_FUNCTION_GRAPH_TRACER=y
+
+CONFIG_I7300_IDLE=m
+
+# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
+CONFIG_CHECKPOINT_RESTORE=y
+
+# Should be 32bit only, but lacks KConfig depends
+# CONFIG_XO15_EBOOK is not set
+
+CONFIG_THUNDERBOLT=m
+
+CONFIG_NTB=m
+CONFIG_NTB_NETDEV=m
+
+# 10GigE
+#
+CONFIG_IP1000=m
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_EN_DCB=y
+# CONFIG_MLX4_DEBUG is not set
+CONFIG_SFC=m
+CONFIG_SFC_MCDI_MON=y
+CONFIG_SFC_SRIOV=y
+CONFIG_SFC_MTD=y
+# Override MTD stuff because SFC_MTD needs it
+CONFIG_MTD_BLOCK=m
+
+CONFIG_HSA_AMD=m
+
+CONFIG_NO_HZ_FULL=y
+# CONFIG_NO_HZ_IDLE is not set
+# CONFIG_NO_HZ_FULL_ALL is not set
+# CONFIG_NO_HZ_FULL_SYSIDLE is not set
+# CONFIG_CONTEXT_TRACKING_FORCE is not set

crash-driver.patch

@@ -0,0 +1,509 @@
+From: Dave Anderson <anderson@redhat.com>
+Date: Tue, 26 Nov 2013 12:42:46 -0500
+Subject: [PATCH] crash-driver
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ arch/arm/include/asm/crash-driver.h     |   6 ++
+ arch/arm64/include/asm/crash-driver.h   |   6 ++
+ arch/ia64/include/asm/crash-driver.h    |  90 ++++++++++++++++++++++
+ arch/ia64/kernel/ia64_ksyms.c           |   3 +
+ arch/powerpc/include/asm/crash-driver.h |   6 ++
+ arch/s390/include/asm/crash-driver.h    |  60 +++++++++++++++
+ arch/s390/mm/maccess.c                  |   2 +
+ arch/x86/include/asm/crash-driver.h     |   6 ++
+ drivers/char/Kconfig                    |   3 +
+ drivers/char/Makefile                   |   2 +
+ drivers/char/crash.c                    | 128 ++++++++++++++++++++++++++++++++
+ include/asm-generic/crash-driver.h      |  72 ++++++++++++++++++
+ 12 files changed, 384 insertions(+)
+ create mode 100644 arch/arm/include/asm/crash-driver.h
+ create mode 100644 arch/arm64/include/asm/crash-driver.h
+ create mode 100644 arch/ia64/include/asm/crash-driver.h
+ create mode 100644 arch/powerpc/include/asm/crash-driver.h
+ create mode 100644 arch/s390/include/asm/crash-driver.h
+ create mode 100644 arch/x86/include/asm/crash-driver.h
+ create mode 100644 drivers/char/crash.c
+ create mode 100644 include/asm-generic/crash-driver.h
+
+diff --git a/arch/arm/include/asm/crash-driver.h b/arch/arm/include/asm/crash-driver.h
+new file mode 100644
+index 000000000000..06e7ae916601
+--- /dev/null
++++ b/arch/arm/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _ARM_CRASH_H
++#define _ARM_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _ARM_CRASH_H */
+diff --git a/arch/arm64/include/asm/crash-driver.h b/arch/arm64/include/asm/crash-driver.h
+new file mode 100644
+index 000000000000..43b26da0c5d6
+--- /dev/null
++++ b/arch/arm64/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _ARM64_CRASH_H
++#define _ARM64_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _ARM64_CRASH_H */
+diff --git a/arch/ia64/include/asm/crash-driver.h b/arch/ia64/include/asm/crash-driver.h
+new file mode 100644
+index 000000000000..404bcb93c112
+--- /dev/null
++++ b/arch/ia64/include/asm/crash-driver.h
+@@ -0,0 +1,90 @@
++#ifndef _ASM_IA64_CRASH_H
++#define _ASM_IA64_CRASH_H
++
++/*
++ * linux/include/asm-ia64/crash-driver.h
++ *
++ * Copyright (c) 2004 Red Hat, Inc. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2, or (at your option)
++ * any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifdef __KERNEL__
++
++#include <linux/efi.h>
++#include <linux/mm.h>
++#include <asm/mmzone.h>
++
++static inline void *
++map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	u32 type;
++
++	if (REGION_NUMBER(offset) == 5) {
++		char byte;
++
++		if (__get_user(byte, (char *)offset) == 0)
++			return (void *)offset;
++		else
++			return NULL;
++	}
++
++	switch (type = efi_mem_type(offset))
++	{
++	case EFI_LOADER_CODE:
++	case EFI_LOADER_DATA:
++	case EFI_BOOT_SERVICES_CODE:
++	case EFI_BOOT_SERVICES_DATA:
++	case EFI_CONVENTIONAL_MEMORY:
++		break;
++
++	default:
++		printk(KERN_INFO
++		    "crash memory driver: invalid memory type for %lx: %d\n",
++			offset, type);
++		return NULL;
++	}
++
++	pfn = offset >> PAGE_SHIFT;
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++			"crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	page = pfn_to_page(pfn);
++
++	if (!page->virtual) {
++		printk(KERN_INFO
++		    "crash memory driver: offset: %lx page: %lx page->virtual: NULL\n",
++			offset, (unsigned long)page);
++		return NULL;
++	}
++
++	return (page->virtual + (offset & (PAGE_SIZE-1)));
++}
++
++static inline void unmap_virtual(struct page *page)
++{
++	return;
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* _ASM_IA64_CRASH_H */
+diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
+index 5b7791dd3965..aee4b870c763 100644
+--- a/arch/ia64/kernel/ia64_ksyms.c
++++ b/arch/ia64/kernel/ia64_ksyms.c
+@@ -84,6 +84,9 @@ EXPORT_SYMBOL(ia64_save_scratch_fpregs);
+ #include <asm/unwind.h>
+ EXPORT_SYMBOL(unw_init_running);
+ 
++#include <linux/efi.h>
++EXPORT_SYMBOL_GPL(efi_mem_type);
++
+ #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
+ extern void esi_call_phys (void);
+ EXPORT_SYMBOL_GPL(esi_call_phys);
+diff --git a/arch/powerpc/include/asm/crash-driver.h b/arch/powerpc/include/asm/crash-driver.h
+new file mode 100644
+index 000000000000..50092d965dc5
+--- /dev/null
++++ b/arch/powerpc/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _PPC64_CRASH_H
++#define _PPC64_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _PPC64_CRASH_H */
+diff --git a/arch/s390/include/asm/crash-driver.h b/arch/s390/include/asm/crash-driver.h
+new file mode 100644
+index 000000000000..552be5e2c571
+--- /dev/null
++++ b/arch/s390/include/asm/crash-driver.h
+@@ -0,0 +1,60 @@
++#ifndef _S390_CRASH_H
++#define _S390_CRASH_H
++
++#ifdef __KERNEL__
++
++#include <linux/mm.h>
++#include <linux/highmem.h>
++
++/*
++ * For swapped prefix pages get bounce buffer using xlate_dev_mem_ptr()
++ */
++static inline void *map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	void *vaddr;
++
++	vaddr = xlate_dev_mem_ptr(offset);
++	pfn = ((unsigned long) vaddr) >> PAGE_SHIFT;
++	if ((unsigned long) vaddr != offset)
++		page = pfn_to_page(pfn);
++	else
++		page = NULL;
++
++	if (!page_is_ram(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
++		return NULL;
++	}
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	*pp = page;
++	return vaddr;
++}
++
++/*
++ * Free bounce buffer if necessary
++ */
++static inline void unmap_virtual(struct page *page)
++{
++	void *vaddr;
++
++	if (page) {
++		/*
++		 * Because for bounce buffers vaddr will never be 0
++		 * unxlate_dev_mem_ptr() will always free the bounce buffer.
++		 */
++		vaddr = (void *)(page_to_pfn(page) << PAGE_SHIFT);
++		unxlate_dev_mem_ptr(0, vaddr);
++	}
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* _S390_CRASH_H */
+diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
+index 2eb34bdfc613..11ce5c98462c 100644
+--- a/arch/s390/mm/maccess.c
++++ b/arch/s390/mm/maccess.c
+@@ -193,6 +193,7 @@ void *xlate_dev_mem_ptr(phys_addr_t addr)
+ 	put_online_cpus();
+ 	return bounce;
+ }
++EXPORT_SYMBOL_GPL(xlate_dev_mem_ptr);
+ 
+ /*
+  * Free converted buffer for /dev/mem access (if necessary)
+@@ -202,3 +203,4 @@ void unxlate_dev_mem_ptr(phys_addr_t addr, void *buf)
+ 	if ((void *) addr != buf)
+ 		free_page((unsigned long) buf);
+ }
++EXPORT_SYMBOL_GPL(unxlate_dev_mem_ptr);
+diff --git a/arch/x86/include/asm/crash-driver.h b/arch/x86/include/asm/crash-driver.h
+new file mode 100644
+index 000000000000..fd4736ec99f5
+--- /dev/null
++++ b/arch/x86/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _X86_CRASH_H
++#define _X86_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _X86_CRASH_H */
+diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
+index efefd12a0f7b..6a318132b7ee 100644
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -4,6 +4,9 @@
+ 
+ menu "Character devices"
+ 
++config CRASH
++	tristate "Crash Utility memory driver"
++
+ source "drivers/tty/Kconfig"
+ 
+ config DEVKMEM
+diff --git a/drivers/char/Makefile b/drivers/char/Makefile
+index d06cde26031b..0832636fd9bc 100644
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -62,3 +62,5 @@ js-rtc-y = rtc.o
+ 
+ obj-$(CONFIG_TILE_SROM)		+= tile-srom.o
+ obj-$(CONFIG_XILLYBUS)		+= xillybus/
++
++obj-$(CONFIG_CRASH)            += crash.o
+diff --git a/drivers/char/crash.c b/drivers/char/crash.c
+new file mode 100644
+index 000000000000..085378a1d539
+--- /dev/null
++++ b/drivers/char/crash.c
+@@ -0,0 +1,128 @@
++/*
++ *  linux/drivers/char/crash.c
++ *
++ *  Copyright (C) 2004  Dave Anderson <anderson@redhat.com>
++ *  Copyright (C) 2004  Red Hat, Inc.
++ */
++
++/******************************************************************************
++ *
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2, or (at your option)
++ *   any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *****************************************************************************/
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/types.h>
++#include <asm/crash-driver.h>
++
++#define CRASH_VERSION   "1.0"
++
++/*
++ *  These are the file operation functions that allow crash utility
++ *  access to physical memory.
++ */
++
++static loff_t
++crash_llseek(struct file * file, loff_t offset, int orig)
++{
++	switch (orig) {
++	case 0:
++		file->f_pos = offset;
++		return file->f_pos;
++	case 1:
++		file->f_pos += offset;
++		return file->f_pos;
++	default:
++		return -EINVAL;
++	}
++}
++
++/*
++ *  Determine the page address for an address offset value,
++ *  get a virtual address for it, and copy it out.
++ *  Accesses must fit within a page.
++ */
++static ssize_t
++crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
++{
++	void *vaddr;
++	struct page *page;
++	u64 offset;
++	ssize_t read;
++
++	offset = *poff;
++	if (offset >> PAGE_SHIFT != (offset+count-1) >> PAGE_SHIFT)
++		return -EINVAL;
++
++	vaddr = map_virtual(offset, &page);
++	if (!vaddr)
++		return -EFAULT;
++
++	if (copy_to_user(buf, vaddr, count)) {
++		unmap_virtual(page);
++		return -EFAULT;
++	}
++	unmap_virtual(page);
++
++	read = count;
++	*poff += read;
++	return read;
++}
++
++static struct file_operations crash_fops = {
++	.owner = THIS_MODULE,
++	.llseek = crash_llseek,
++	.read = crash_read,
++};
++
++static struct miscdevice crash_dev = {
++	MISC_DYNAMIC_MINOR,
++	"crash",
++	&crash_fops
++};
++
++static int __init
++crash_init(void)
++{
++	int ret;
++
++	ret = misc_register(&crash_dev);
++	if (ret) {
++		printk(KERN_ERR
++		    "crash memory driver: cannot misc_register (MISC_DYNAMIC_MINOR)\n");
++		goto out;
++	}
++
++	ret = 0;
++	printk(KERN_INFO "crash memory driver: version %s\n", CRASH_VERSION);
++out:
++	return ret;
++}
++
++static void __exit
++crash_cleanup_module(void)
++{
++	misc_deregister(&crash_dev);
++}
++
++module_init(crash_init);
++module_exit(crash_cleanup_module);
++
++MODULE_LICENSE("GPL");
+diff --git a/include/asm-generic/crash-driver.h b/include/asm-generic/crash-driver.h
+new file mode 100644
+index 000000000000..25ab9869d566
+--- /dev/null
++++ b/include/asm-generic/crash-driver.h
+@@ -0,0 +1,72 @@
++#ifndef __CRASH_H__
++#define __CRASH_H__
++
++/*
++ * include/linux/crash-driver.h
++ *
++ * Copyright (c) 2013 Red Hat, Inc. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2, or (at your option)
++ * any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifdef __KERNEL__
++
++#include <linux/mm.h>
++#include <linux/highmem.h>
++
++static inline void *
++map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	void *vaddr;
++
++	pfn = (unsigned long)(offset >> PAGE_SHIFT);
++
++	if (!page_is_ram(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
++		return NULL;
++	}
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	page = pfn_to_page(pfn);
++
++	vaddr = kmap(page);
++	if (!vaddr) {
++		printk(KERN_INFO
++		    "crash memory driver: pfn: %lx kmap(page: %lx) failed\n",
++			pfn, (unsigned long)page);
++		return NULL;
++	}
++
++	*pp = page;
++	return (vaddr + (offset & (PAGE_SIZE-1)));
++}
++
++static inline void unmap_virtual(struct page *page)
++{
++	kunmap(page);
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* __CRASH_H__ */
+-- 
+2.1.0
+

criu-no-expert.patch

@@ -0,0 +1,35 @@
+From: "kernel-team@fedoraproject.org" <kernel-team@fedoraproject.org>
+Date: Wed, 30 Jan 2013 10:55:31 -0500
+Subject: [PATCH] criu: no expert
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ init/Kconfig | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/init/Kconfig b/init/Kconfig
+index dac9ed0f01f7..31a29fe7c555 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1128,7 +1128,7 @@ config DEBUG_BLK_CGROUP
+ endif # CGROUPS
+ 
+ config CHECKPOINT_RESTORE
+-	bool "Checkpoint/restore support" if EXPERT
++	bool "Checkpoint/restore support"
+ 	default n
+ 	help
+ 	  Enables additional kernel features in a sake of checkpoint/restore.
+@@ -1139,7 +1139,7 @@ config CHECKPOINT_RESTORE
+ 	  If unsure, say N here.
+ 
+ menuconfig NAMESPACES
+-	bool "Namespaces support" if EXPERT
++	bool "Namespaces support"
+ 	default !EXPERT
+ 	help
+ 	  Provides the way to make tasks work with different objects using
+-- 
+2.1.0
+

die-floppy-die.patch

@@ -0,0 +1,32 @@
+From: Kyle McMartin <kyle@phobos.i.jkkm.org>
+Date: Tue, 30 Mar 2010 00:04:29 -0400
+Subject: [PATCH] die-floppy-die
+
+Kill the floppy.ko pnp modalias. We were surviving just fine without
+autoloading floppy drivers, tyvm.
+
+Please feel free to register all complaints in the wastepaper bin.
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ drivers/block/floppy.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
+index 56d46ffb08e1..1c8db250df88 100644
+--- a/drivers/block/floppy.c
++++ b/drivers/block/floppy.c
+@@ -4634,8 +4634,7 @@ static const struct pnp_device_id floppy_pnpids[] = {
+ 	{"PNP0700", 0},
+ 	{}
+ };
+-
+-MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
++/* MODULE_DEVICE_TABLE(pnp, floppy_pnpids); */
+ 
+ #else
+ 
+-- 
+2.1.0
+

disable-i8042-check-on-apple-mac.patch

@@ -0,0 +1,61 @@
+From: Bastien Nocera <hadess@hadess.net>
+Date: Thu, 20 May 2010 10:30:31 -0400
+Subject: [PATCH] disable i8042 check on apple mac
+
+As those computers never had any i8042 controllers, and the
+current lookup code could potentially lock up/hang/wait for
+timeout for long periods of time.
+
+Fixes intermittent hangs on boot on a MacbookAir1,1
+
+Bugzilla: N/A
+Upstream-status: http://lkml.indiana.edu/hypermail/linux/kernel/1005.0/00938.html (and pinged on Dec 17, 2013)
+
+Signed-off-by: Bastien Nocera <hadess@hadess.net>
+---
+ drivers/input/serio/i8042.c | 22 ++++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
+index bfb0b2280df0..06b10fe7e65b 100644
+--- a/drivers/input/serio/i8042.c
++++ b/drivers/input/serio/i8042.c
+@@ -1484,6 +1484,22 @@ static struct platform_driver i8042_driver = {
+ 	.shutdown	= i8042_shutdown,
+ };
+ 
++#ifdef CONFIG_DMI
++static struct dmi_system_id __initdata dmi_system_table[] = {
++	{
++		.matches = {
++			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Computer, Inc.")
++		},
++	},
++	{
++		.matches = {
++			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Inc.")
++		},
++	},
++	{}
++};
++#endif /*CONFIG_DMI*/
++
+ static int __init i8042_init(void)
+ {
+ 	struct platform_device *pdev;
+@@ -1491,6 +1507,12 @@ static int __init i8042_init(void)
+ 
+ 	dbg_init();
+ 
++#ifdef CONFIG_DMI
++	/* Intel Apple Macs never have an i8042 controller */
++	if (dmi_check_system(dmi_system_table) > 0)
++		return -ENODEV;
++#endif /*CONFIG_DMI*/
++
+ 	err = i8042_platform_init();
+ 	if (err)
+ 		return err;
+-- 
+2.1.0
+

drm-i915-Disable-verbose-state-checks.patch

@@ -0,0 +1,31 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Thu, 29 Jan 2015 14:03:17 -0500
+Subject: [PATCH] drm/i915: Disable verbose state checks
+
+For stable releases, we disable the verbose state checks in the i915 driver.
+They are mostly for development purposes and they fill the retrace server
+to the point of uselessness.  We leave these enabled in rawhide kernels,
+where they are both more likely to get attention from upstream and more
+likely to be fixable.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ drivers/gpu/drm/i915/i915_params.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
+index db07153b693f..c049fe3fbdff 100644
+--- a/drivers/gpu/drm/i915/i915_params.c
++++ b/drivers/gpu/drm/i915/i915_params.c
+@@ -51,7 +51,7 @@ struct i915_params i915 __read_mostly = {
+ 	.disable_vtd_wa = 0,
+ 	.use_mmio_flip = 0,
+ 	.mmio_debug = 0,
+-	.verbose_state_checks = 1,
++	.verbose_state_checks = 0,
+ };
+ 
+ module_param_named(modeset, i915.modeset, int, 0400);
+-- 
+2.1.0
+

drm-i915-hush-check-crtc-state.patch

@@ -0,0 +1,31 @@
+From: Adam Jackson <ajax@redhat.com>
+Date: Wed, 13 Nov 2013 10:17:24 -0500
+Subject: [PATCH] drm/i915: hush check crtc state
+
+This is _by far_ the most common backtrace for i915 on retrace.fp.o, and
+it's mostly useless noise.  There's not enough context when it's generated
+to know if something actually went wrong.  Downgrade the message to
+KMS debugging so we can still get it if we want it.
+
+Bugzilla: 1027037 1028785
+Upstream-status: http://lists.freedesktop.org/archives/intel-gfx/2013-November/035948.html
+---
+ drivers/gpu/drm/i915/intel_display.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
+index 33d4d37fd614..6865ef2d3476 100644
+--- a/drivers/gpu/drm/i915/intel_display.c
++++ b/drivers/gpu/drm/i915/intel_display.c
+@@ -10873,7 +10873,7 @@ check_crtc_state(struct drm_device *dev)
+ 
+ 		if (active &&
+ 		    !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
+-			I915_STATE_WARN(1, "pipe state doesn't match!\n");
++			DRM_DEBUG_KMS("pipe state doesn't match!\n");
+ 			intel_dump_pipe_config(crtc, &pipe_config,
+ 					       "[hw state]");
+ 			intel_dump_pipe_config(crtc, &crtc->config,
+-- 
+2.1.0
+

drm-i915-tame-the-chattermouth-v2.patch

@@ -0,0 +1,561 @@
+From: Rob Clark <robdclark@gmail.com>
+Date: Mon, 15 Dec 2014 13:56:32 -0500
+Subject: [PATCH] drm/i915: tame the chattermouth (v2)
+
+Many distro's have mechanism in place to collect and automatically file
+bugs for failed WARN()s.  And since i915 has a lot of hw state sanity
+checks which result in WARN(), it generates quite a lot of noise which
+is somewhat disconcerting to the end user.
+
+Separate out the internal hw-is-in-the-state-I-expected checks into
+I915_STATE_WARN()s and allow configuration via i915.verbose_checks module
+param about whether this will generate a full blown stacktrace or just
+DRM_ERROR().  The new moduleparam defaults to true, so by default there
+is no change in behavior.  And even when disabled, you will still get
+an error message logged.
+
+v2: paint the macro names blue, clarify that the default behavior
+    remains the same as before
+
+Signed-off-by: Rob Clark <robdclark@gmail.com>
+Acked-by: Jani Nikula <jani.nikula@intel.com>
+Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
+---
+ drivers/gpu/drm/i915/i915_drv.h      |  30 ++++++++
+ drivers/gpu/drm/i915/i915_params.c   |   5 ++
+ drivers/gpu/drm/i915/intel_display.c | 134 +++++++++++++++++------------------
+ drivers/gpu/drm/i915/intel_dp.c      |   4 +-
+ 4 files changed, 104 insertions(+), 69 deletions(-)
+
+diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
+index 44a3c385eea2..757f000a1d14 100644
+--- a/drivers/gpu/drm/i915/i915_drv.h
++++ b/drivers/gpu/drm/i915/i915_drv.h
+@@ -60,6 +60,35 @@
+ #undef WARN_ON
+ #define WARN_ON(x)		WARN(x, "WARN_ON(" #x ")")
+ 
++/* Use I915_STATE_WARN(x) and I915_STATE_WARN_ON() (rather than WARN() and
++ * WARN_ON()) for hw state sanity checks to check for unexpected conditions
++ * which may not necessarily be a user visible problem.  This will either
++ * WARN() or DRM_ERROR() depending on the verbose_checks moduleparam, to
++ * enable distros and users to tailor their preferred amount of i915 abrt
++ * spam.
++ */
++#define I915_STATE_WARN(condition, format...) ({			\
++	int __ret_warn_on = !!(condition);				\
++	if (unlikely(__ret_warn_on)) {					\
++		if (i915.verbose_state_checks)				\
++			__WARN_printf(format);				\
++		else 							\
++			DRM_ERROR(format);				\
++	}								\
++	unlikely(__ret_warn_on);					\
++})
++
++#define I915_STATE_WARN_ON(condition) ({				\
++	int __ret_warn_on = !!(condition);				\
++	if (unlikely(__ret_warn_on)) {					\
++		if (i915.verbose_state_checks)				\
++			__WARN_printf("WARN_ON(" #condition ")\n");	\
++		else 							\
++			DRM_ERROR("WARN_ON(" #condition ")\n");		\
++	}								\
++	unlikely(__ret_warn_on);					\
++})
++
+ enum pipe {
+ 	INVALID_PIPE = -1,
+ 	PIPE_A = 0,
+@@ -2316,6 +2345,7 @@ struct i915_params {
+ 	bool disable_vtd_wa;
+ 	int use_mmio_flip;
+ 	bool mmio_debug;
++	bool verbose_state_checks;
+ };
+ extern struct i915_params i915 __read_mostly;
+ 
+diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
+index c91cb2033cc5..db07153b693f 100644
+--- a/drivers/gpu/drm/i915/i915_params.c
++++ b/drivers/gpu/drm/i915/i915_params.c
+@@ -51,6 +51,7 @@ struct i915_params i915 __read_mostly = {
+ 	.disable_vtd_wa = 0,
+ 	.use_mmio_flip = 0,
+ 	.mmio_debug = 0,
++	.verbose_state_checks = 1,
+ };
+ 
+ module_param_named(modeset, i915.modeset, int, 0400);
+@@ -173,3 +174,7 @@ module_param_named(mmio_debug, i915.mmio_debug, bool, 0600);
+ MODULE_PARM_DESC(mmio_debug,
+ 	"Enable the MMIO debug code (default: false). This may negatively "
+ 	"affect performance.");
++
++module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);
++MODULE_PARM_DESC(verbose_state_checks,
++	"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
+diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
+index 791b00e612d8..33d4d37fd614 100644
+--- a/drivers/gpu/drm/i915/intel_display.c
++++ b/drivers/gpu/drm/i915/intel_display.c
+@@ -1024,7 +1024,7 @@ void assert_pll(struct drm_i915_private *dev_priv,
+ 	reg = DPLL(pipe);
+ 	val = I915_READ(reg);
+ 	cur_state = !!(val & DPLL_VCO_ENABLE);
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "PLL state assertion failure (expected %s, current %s)\n",
+ 	     state_string(state), state_string(cur_state));
+ }
+@@ -1040,7 +1040,7 @@ static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
+ 	mutex_unlock(&dev_priv->dpio_lock);
+ 
+ 	cur_state = val & DSI_PLL_VCO_EN;
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "DSI PLL state assertion failure (expected %s, current %s)\n",
+ 	     state_string(state), state_string(cur_state));
+ }
+@@ -1071,7 +1071,7 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
+ 		return;
+ 
+ 	cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "%s assertion failure (expected %s, current %s)\n",
+ 	     pll->name, state_string(state), state_string(cur_state));
+ }
+@@ -1095,7 +1095,7 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
+ 		val = I915_READ(reg);
+ 		cur_state = !!(val & FDI_TX_ENABLE);
+ 	}
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "FDI TX state assertion failure (expected %s, current %s)\n",
+ 	     state_string(state), state_string(cur_state));
+ }
+@@ -1112,7 +1112,7 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
+ 	reg = FDI_RX_CTL(pipe);
+ 	val = I915_READ(reg);
+ 	cur_state = !!(val & FDI_RX_ENABLE);
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "FDI RX state assertion failure (expected %s, current %s)\n",
+ 	     state_string(state), state_string(cur_state));
+ }
+@@ -1135,7 +1135,7 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
+ 
+ 	reg = FDI_TX_CTL(pipe);
+ 	val = I915_READ(reg);
+-	WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
++	I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
+ }
+ 
+ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
+@@ -1148,7 +1148,7 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
+ 	reg = FDI_RX_CTL(pipe);
+ 	val = I915_READ(reg);
+ 	cur_state = !!(val & FDI_RX_PLL_ENABLE);
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "FDI RX PLL assertion failure (expected %s, current %s)\n",
+ 	     state_string(state), state_string(cur_state));
+ }
+@@ -1190,7 +1190,7 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
+ 	    ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
+ 		locked = false;
+ 
+-	WARN(panel_pipe == pipe && locked,
++	I915_STATE_WARN(panel_pipe == pipe && locked,
+ 	     "panel assertion failure, pipe %c regs locked\n",
+ 	     pipe_name(pipe));
+ }
+@@ -1206,7 +1206,7 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
+ 	else
+ 		cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
+ 
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "cursor on pipe %c assertion failure (expected %s, current %s)\n",
+ 	     pipe_name(pipe), state_string(state), state_string(cur_state));
+ }
+@@ -1236,7 +1236,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
+ 		cur_state = !!(val & PIPECONF_ENABLE);
+ 	}
+ 
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "pipe %c assertion failure (expected %s, current %s)\n",
+ 	     pipe_name(pipe), state_string(state), state_string(cur_state));
+ }
+@@ -1251,7 +1251,7 @@ static void assert_plane(struct drm_i915_private *dev_priv,
+ 	reg = DSPCNTR(plane);
+ 	val = I915_READ(reg);
+ 	cur_state = !!(val & DISPLAY_PLANE_ENABLE);
+-	WARN(cur_state != state,
++	I915_STATE_WARN(cur_state != state,
+ 	     "plane %c assertion failure (expected %s, current %s)\n",
+ 	     plane_name(plane), state_string(state), state_string(cur_state));
+ }
+@@ -1271,7 +1271,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
+ 	if (INTEL_INFO(dev)->gen >= 4) {
+ 		reg = DSPCNTR(pipe);
+ 		val = I915_READ(reg);
+-		WARN(val & DISPLAY_PLANE_ENABLE,
++		I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
+ 		     "plane %c assertion failure, should be disabled but not\n",
+ 		     plane_name(pipe));
+ 		return;
+@@ -1283,7 +1283,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
+ 		val = I915_READ(reg);
+ 		cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
+ 			DISPPLANE_SEL_PIPE_SHIFT;
+-		WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
++		I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
+ 		     "plane %c assertion failure, should be off on pipe %c but is still active\n",
+ 		     plane_name(i), pipe_name(pipe));
+ 	}
+@@ -1299,7 +1299,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+ 	if (INTEL_INFO(dev)->gen >= 9) {
+ 		for_each_sprite(pipe, sprite) {
+ 			val = I915_READ(PLANE_CTL(pipe, sprite));
+-			WARN(val & PLANE_CTL_ENABLE,
++			I915_STATE_WARN(val & PLANE_CTL_ENABLE,
+ 			     "plane %d assertion failure, should be off on pipe %c but is still active\n",
+ 			     sprite, pipe_name(pipe));
+ 		}
+@@ -1307,20 +1307,20 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+ 		for_each_sprite(pipe, sprite) {
+ 			reg = SPCNTR(pipe, sprite);
+ 			val = I915_READ(reg);
+-			WARN(val & SP_ENABLE,
++			I915_STATE_WARN(val & SP_ENABLE,
+ 			     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
+ 			     sprite_name(pipe, sprite), pipe_name(pipe));
+ 		}
+ 	} else if (INTEL_INFO(dev)->gen >= 7) {
+ 		reg = SPRCTL(pipe);
+ 		val = I915_READ(reg);
+-		WARN(val & SPRITE_ENABLE,
++		I915_STATE_WARN(val & SPRITE_ENABLE,
+ 		     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
+ 		     plane_name(pipe), pipe_name(pipe));
+ 	} else if (INTEL_INFO(dev)->gen >= 5) {
+ 		reg = DVSCNTR(pipe);
+ 		val = I915_READ(reg);
+-		WARN(val & DVS_ENABLE,
++		I915_STATE_WARN(val & DVS_ENABLE,
+ 		     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
+ 		     plane_name(pipe), pipe_name(pipe));
+ 	}
+@@ -1328,7 +1328,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+ 
+ static void assert_vblank_disabled(struct drm_crtc *crtc)
+ {
+-	if (WARN_ON(drm_crtc_vblank_get(crtc) == 0))
++	if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
+ 		drm_crtc_vblank_put(crtc);
+ }
+ 
+@@ -1337,12 +1337,12 @@ static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
+ 	u32 val;
+ 	bool enabled;
+ 
+-	WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
++	I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
+ 
+ 	val = I915_READ(PCH_DREF_CONTROL);
+ 	enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
+ 			    DREF_SUPERSPREAD_SOURCE_MASK));
+-	WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
++	I915_STATE_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
+ }
+ 
+ static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+@@ -1355,7 +1355,7 @@ static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+ 	reg = PCH_TRANSCONF(pipe);
+ 	val = I915_READ(reg);
+ 	enabled = !!(val & TRANS_ENABLE);
+-	WARN(enabled,
++	I915_STATE_WARN(enabled,
+ 	     "transcoder assertion failed, should be off on pipe %c but is still active\n",
+ 	     pipe_name(pipe));
+ }
+@@ -1435,11 +1435,11 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
+ 				   enum pipe pipe, int reg, u32 port_sel)
+ {
+ 	u32 val = I915_READ(reg);
+-	WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
++	I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
+ 	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
+ 	     reg, pipe_name(pipe));
+ 
+-	WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
++	I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+ 	     && (val & DP_PIPEB_SELECT),
+ 	     "IBX PCH dp port still using transcoder B\n");
+ }
+@@ -1448,11 +1448,11 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
+ 				     enum pipe pipe, int reg)
+ {
+ 	u32 val = I915_READ(reg);
+-	WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
++	I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
+ 	     "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
+ 	     reg, pipe_name(pipe));
+ 
+-	WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
++	I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
+ 	     && (val & SDVO_PIPE_B_SELECT),
+ 	     "IBX PCH hdmi port still using transcoder B\n");
+ }
+@@ -1469,13 +1469,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
+ 
+ 	reg = PCH_ADPA;
+ 	val = I915_READ(reg);
+-	WARN(adpa_pipe_enabled(dev_priv, pipe, val),
++	I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
+ 	     "PCH VGA enabled on transcoder %c, should be disabled\n",
+ 	     pipe_name(pipe));
+ 
+ 	reg = PCH_LVDS;
+ 	val = I915_READ(reg);
+-	WARN(lvds_pipe_enabled(dev_priv, pipe, val),
++	I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
+ 	     "PCH LVDS enabled on transcoder %c, should be disabled\n",
+ 	     pipe_name(pipe));
+ 
+@@ -5388,25 +5388,25 @@ static void intel_connector_check_state(struct intel_connector *connector)
+ 		if (connector->mst_port)
+ 			return;
+ 
+-		WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
++		I915_STATE_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
+ 		     "wrong connector dpms state\n");
+-		WARN(connector->base.encoder != &encoder->base,
++		I915_STATE_WARN(connector->base.encoder != &encoder->base,
+ 		     "active connector not linked to encoder\n");
+ 
+ 		if (encoder) {
+-			WARN(!encoder->connectors_active,
++			I915_STATE_WARN(!encoder->connectors_active,
+ 			     "encoder->connectors_active not set\n");
+ 
+ 			encoder_enabled = encoder->get_hw_state(encoder, &pipe);
+-			WARN(!encoder_enabled, "encoder not enabled\n");
+-			if (WARN_ON(!encoder->base.crtc))
++			I915_STATE_WARN(!encoder_enabled, "encoder not enabled\n");
++			if (I915_STATE_WARN_ON(!encoder->base.crtc))
+ 				return;
+ 
+ 			crtc = encoder->base.crtc;
+ 
+-			WARN(!crtc->enabled, "crtc not enabled\n");
+-			WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
+-			WARN(pipe != to_intel_crtc(crtc)->pipe,
++			I915_STATE_WARN(!crtc->enabled, "crtc not enabled\n");
++			I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
++			I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
+ 			     "encoder active on the wrong pipe\n");
+ 		}
+ 	}
+@@ -7814,24 +7814,24 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
+ 	struct intel_crtc *crtc;
+ 
+ 	for_each_intel_crtc(dev, crtc)
+-		WARN(crtc->active, "CRTC for pipe %c enabled\n",
++		I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
+ 		     pipe_name(crtc->pipe));
+ 
+-	WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
+-	WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
+-	WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
+-	WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
+-	WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
+-	WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
++	I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
++	I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
++	I915_STATE_WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
++	I915_STATE_WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
++	I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
++	I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
+ 	     "CPU PWM1 enabled\n");
+ 	if (IS_HASWELL(dev))
+-		WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
++		I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
+ 		     "CPU PWM2 enabled\n");
+-	WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
++	I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
+ 	     "PCH PWM1 enabled\n");
+-	WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
++	I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
+ 	     "Utility pin enabled\n");
+-	WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
++	I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
+ 
+ 	/*
+ 	 * In theory we can still leave IRQs enabled, as long as only the HPD
+@@ -7839,7 +7839,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
+ 	 * gen-specific and since we only disable LCPLL after we fully disable
+ 	 * the interrupts, the check below should be enough.
+ 	 */
+-	WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
++	I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
+ }
+ 
+ static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
+@@ -10746,7 +10746,7 @@ check_connector_state(struct drm_device *dev)
+ 		 * ->get_hw_state callbacks. */
+ 		intel_connector_check_state(connector);
+ 
+-		WARN(&connector->new_encoder->base != connector->base.encoder,
++		I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder,
+ 		     "connector's staged encoder doesn't match current encoder\n");
+ 	}
+ }
+@@ -10766,9 +10766,9 @@ check_encoder_state(struct drm_device *dev)
+ 			      encoder->base.base.id,
+ 			      encoder->base.name);
+ 
+-		WARN(&encoder->new_crtc->base != encoder->base.crtc,
++		I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc,
+ 		     "encoder's stage crtc doesn't match current crtc\n");
+-		WARN(encoder->connectors_active && !encoder->base.crtc,
++		I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc,
+ 		     "encoder's active_connectors set, but no crtc\n");
+ 
+ 		list_for_each_entry(connector, &dev->mode_config.connector_list,
+@@ -10787,19 +10787,19 @@ check_encoder_state(struct drm_device *dev)
+ 		if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
+ 			continue;
+ 
+-		WARN(!!encoder->base.crtc != enabled,
++		I915_STATE_WARN(!!encoder->base.crtc != enabled,
+ 		     "encoder's enabled state mismatch "
+ 		     "(expected %i, found %i)\n",
+ 		     !!encoder->base.crtc, enabled);
+-		WARN(active && !encoder->base.crtc,
++		I915_STATE_WARN(active && !encoder->base.crtc,
+ 		     "active encoder with no crtc\n");
+ 
+-		WARN(encoder->connectors_active != active,
++		I915_STATE_WARN(encoder->connectors_active != active,
+ 		     "encoder's computed active state doesn't match tracked active state "
+ 		     "(expected %i, found %i)\n", active, encoder->connectors_active);
+ 
+ 		active = encoder->get_hw_state(encoder, &pipe);
+-		WARN(active != encoder->connectors_active,
++		I915_STATE_WARN(active != encoder->connectors_active,
+ 		     "encoder's hw state doesn't match sw tracking "
+ 		     "(expected %i, found %i)\n",
+ 		     encoder->connectors_active, active);
+@@ -10808,7 +10808,7 @@ check_encoder_state(struct drm_device *dev)
+ 			continue;
+ 
+ 		tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
+-		WARN(active && pipe != tracked_pipe,
++		I915_STATE_WARN(active && pipe != tracked_pipe,
+ 		     "active encoder's pipe doesn't match"
+ 		     "(expected %i, found %i)\n",
+ 		     tracked_pipe, pipe);
+@@ -10833,7 +10833,7 @@ check_crtc_state(struct drm_device *dev)
+ 		DRM_DEBUG_KMS("[CRTC:%d]\n",
+ 			      crtc->base.base.id);
+ 
+-		WARN(crtc->active && !crtc->base.enabled,
++		I915_STATE_WARN(crtc->active && !crtc->base.enabled,
+ 		     "active crtc, but not enabled in sw tracking\n");
+ 
+ 		for_each_intel_encoder(dev, encoder) {
+@@ -10844,10 +10844,10 @@ check_crtc_state(struct drm_device *dev)
+ 				active = true;
+ 		}
+ 
+-		WARN(active != crtc->active,
++		I915_STATE_WARN(active != crtc->active,
+ 		     "crtc's computed active state doesn't match tracked active state "
+ 		     "(expected %i, found %i)\n", active, crtc->active);
+-		WARN(enabled != crtc->base.enabled,
++		I915_STATE_WARN(enabled != crtc->base.enabled,
+ 		     "crtc's computed enabled state doesn't match tracked enabled state "
+ 		     "(expected %i, found %i)\n", enabled, crtc->base.enabled);
+ 
+@@ -10867,13 +10867,13 @@ check_crtc_state(struct drm_device *dev)
+ 				encoder->get_config(encoder, &pipe_config);
+ 		}
+ 
+-		WARN(crtc->active != active,
++		I915_STATE_WARN(crtc->active != active,
+ 		     "crtc active state doesn't match with hw state "
+ 		     "(expected %i, found %i)\n", crtc->active, active);
+ 
+ 		if (active &&
+ 		    !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
+-			WARN(1, "pipe state doesn't match!\n");
++			I915_STATE_WARN(1, "pipe state doesn't match!\n");
+ 			intel_dump_pipe_config(crtc, &pipe_config,
+ 					       "[hw state]");
+ 			intel_dump_pipe_config(crtc, &crtc->config,
+@@ -10901,14 +10901,14 @@ check_shared_dpll_state(struct drm_device *dev)
+ 
+ 		active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
+ 
+-		WARN(pll->active > hweight32(pll->config.crtc_mask),
++		I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask),
+ 		     "more active pll users than references: %i vs %i\n",
+ 		     pll->active, hweight32(pll->config.crtc_mask));
+-		WARN(pll->active && !pll->on,
++		I915_STATE_WARN(pll->active && !pll->on,
+ 		     "pll in active use but not on in sw tracking\n");
+-		WARN(pll->on && !pll->active,
++		I915_STATE_WARN(pll->on && !pll->active,
+ 		     "pll in on but not on in use in sw tracking\n");
+-		WARN(pll->on != active,
++		I915_STATE_WARN(pll->on != active,
+ 		     "pll on state mismatch (expected %i, found %i)\n",
+ 		     pll->on, active);
+ 
+@@ -10918,14 +10918,14 @@ check_shared_dpll_state(struct drm_device *dev)
+ 			if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
+ 				active_crtcs++;
+ 		}
+-		WARN(pll->active != active_crtcs,
++		I915_STATE_WARN(pll->active != active_crtcs,
+ 		     "pll active crtcs mismatch (expected %i, found %i)\n",
+ 		     pll->active, active_crtcs);
+-		WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
++		I915_STATE_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
+ 		     "pll enabled crtcs mismatch (expected %i, found %i)\n",
+ 		     hweight32(pll->config.crtc_mask), enabled_crtcs);
+ 
+-		WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
++		I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
+ 				       sizeof(dpll_hw_state)),
+ 		     "pll hw state mismatch\n");
+ 	}
+diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
+index 9f6c8971855c..67adf6437f78 100644
+--- a/drivers/gpu/drm/i915/intel_dp.c
++++ b/drivers/gpu/drm/i915/intel_dp.c
+@@ -1558,7 +1558,7 @@ void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
+ 	vdd = edp_panel_vdd_on(intel_dp);
+ 	pps_unlock(intel_dp);
+ 
+-	WARN(!vdd, "eDP port %c VDD already requested on\n",
++	I915_STATE_WARN(!vdd, "eDP port %c VDD already requested on\n",
+ 	     port_name(dp_to_dig_port(intel_dp)->port));
+ }
+ 
+@@ -1642,7 +1642,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
+ 	if (!is_edp(intel_dp))
+ 		return;
+ 
+-	WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
++	I915_STATE_WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
+ 	     port_name(dp_to_dig_port(intel_dp)->port));
+ 
+ 	intel_dp->want_panel_vdd = false;
+-- 
+2.1.0
+

efi-Add-EFI_SECURE_BOOT-bit.patch

@@ -0,0 +1,42 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Tue, 27 Aug 2013 13:33:03 -0400
+Subject: [PATCH] efi: Add EFI_SECURE_BOOT bit
+
+UEFI machines can be booted in Secure Boot mode.  Add a EFI_SECURE_BOOT bit
+for use with efi_enabled.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ arch/x86/kernel/setup.c | 2 ++
+ include/linux/efi.h     | 1 +
+ 2 files changed, 3 insertions(+)
+
+diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
+index 5d52d67d5097..b40d6174242f 100644
+--- a/arch/x86/kernel/setup.c
++++ b/arch/x86/kernel/setup.c
+@@ -1154,7 +1154,9 @@ void __init setup_arch(char **cmdline_p)
+ 
+ #ifdef CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE
+ 	if (boot_params.secure_boot) {
++		set_bit(EFI_SECURE_BOOT, &efi.flags);
+ 		enforce_signed_modules();
++		pr_info("Secure boot enabled\n");
+ 	}
+ #endif
+ 
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index 0238d612750e..16ec1c00919d 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -940,6 +940,7 @@ extern int __init efi_setup_pcdp_console(char *);
+ #define EFI_64BIT		5	/* Is the firmware 64-bit? */
+ #define EFI_PARAVIRT		6	/* Access is via a paravirt interface */
+ #define EFI_ARCH_1		7	/* First arch-specific bit */
++#define EFI_SECURE_BOOT		8	/* Are we in Secure Boot mode? */
+ 
+ #ifdef CONFIG_EFI
+ /*
+-- 
+2.1.0
+

efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch

@@ -0,0 +1,57 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Tue, 5 Feb 2013 19:25:05 -0500
+Subject: [PATCH] efi: Disable secure boot if shim is in insecure mode
+
+A user can manually tell the shim boot loader to disable validation of
+images it loads.  When a user does this, it creates a UEFI variable called
+MokSBState that does not have the runtime attribute set.  Given that the
+user explicitly disabled validation, we can honor that and not enable
+secure boot mode if that variable is set.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ arch/x86/boot/compressed/eboot.c | 20 +++++++++++++++++++-
+ 1 file changed, 19 insertions(+), 1 deletion(-)
+
+diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
+index 2192da755e34..4b03911a502d 100644
+--- a/arch/x86/boot/compressed/eboot.c
++++ b/arch/x86/boot/compressed/eboot.c
+@@ -831,8 +831,9 @@ out:
+ 
+ static int get_secure_boot(void)
+ {
+-	u8 sb, setup;
++	u8 sb, setup, moksbstate;
+ 	unsigned long datasize = sizeof(sb);
++	u32 attr;
+ 	efi_guid_t var_guid = EFI_GLOBAL_VARIABLE_GUID;
+ 	efi_status_t status;
+ 
+@@ -856,6 +857,23 @@ static int get_secure_boot(void)
+ 	if (setup == 1)
+ 		return 0;
+ 
++	/* See if a user has put shim into insecure_mode.  If so, and the variable
++	 * doesn't have the runtime attribute set, we might as well honor that.
++	 */
++	var_guid = EFI_SHIM_LOCK_GUID;
++	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
++				L"MokSBState", &var_guid, &attr, &datasize,
++				&moksbstate);
++
++	/* If it fails, we don't care why.  Default to secure */
++	if (status != EFI_SUCCESS)
++		return 1;
++
++	if (!(attr & EFI_VARIABLE_RUNTIME_ACCESS)) {
++		if (moksbstate == 1)
++			return 0;
++	}
++
+ 	return 1;
+ }
+ 
+-- 
+2.1.0
+

efi-Make-EFI_SECURE_BOOT_SIG_ENFORCE-depend-on-EFI.patch

@@ -0,0 +1,29 @@
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Tue, 27 Aug 2013 13:28:43 -0400
+Subject: [PATCH] efi: Make EFI_SECURE_BOOT_SIG_ENFORCE depend on EFI
+
+The functionality of the config option is dependent upon the platform being
+UEFI based.  Reflect this in the config deps.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ arch/x86/Kconfig | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 58273956750d..e17f88ceaeab 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -1661,7 +1661,8 @@ config EFI_MIXED
+ 	   If unsure, say N.
+ 
+ config EFI_SECURE_BOOT_SIG_ENFORCE
+-        def_bool n
++	def_bool n
++	depends on EFI
+ 	prompt "Force module signing when UEFI Secure Boot is enabled"
+ 	---help---
+ 	  UEFI Secure Boot provides a mechanism for ensuring that the
+-- 
+2.1.0
+

ext4-Allocate-entire-range-in-zero-range.patch

@@ -0,0 +1,78 @@
+From: Lukas Czerner <lczerner@redhat.com>
+Date: Wed, 18 Feb 2015 17:49:28 +0100
+Subject: [PATCH] ext4: Allocate entire range in zero range
+
+Currently there is a bug in zero range code which causes zero range
+calls to only allocate block aligned portion of the range, while
+ignoring the rest in some cases.
+
+In some cases, namely if the end of the range is past isize, we do
+attempt to preallocate the last nonaligned block. However this might
+cause kernel to BUG() in some carefully designed zero range requests on
+setups where page size > block size.
+
+Fix this problem by first preallocating the entire range, including the
+nonaligned edges and converting the written extents to unwritten in the
+next step. This approach will also give us the advantage of having the
+range to be as linearly contiguous as possible.
+
+Signed-off-by: Lukas Czerner <lczerner@redhat.com>
+---
+ fs/ext4/extents.c | 31 +++++++++++++++++++------------
+ 1 file changed, 19 insertions(+), 12 deletions(-)
+
+diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
+index bed43081720f..aa522429b751 100644
+--- a/fs/ext4/extents.c
++++ b/fs/ext4/extents.c
+@@ -4803,12 +4803,6 @@ static long ext4_zero_range(struct file *file, loff_t offset,
+ 	else
+ 		max_blocks -= lblk;
+ 
+-	flags = EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT |
+-		EXT4_GET_BLOCKS_CONVERT_UNWRITTEN |
+-		EXT4_EX_NOCACHE;
+-	if (mode & FALLOC_FL_KEEP_SIZE)
+-		flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
+-
+ 	mutex_lock(&inode->i_mutex);
+ 
+ 	/*
+@@ -4825,15 +4819,28 @@ static long ext4_zero_range(struct file *file, loff_t offset,
+ 		ret = inode_newsize_ok(inode, new_size);
+ 		if (ret)
+ 			goto out_mutex;
+-		/*
+-		 * If we have a partial block after EOF we have to allocate
+-		 * the entire block.
+-		 */
+-		if (partial_end)
+-			max_blocks += 1;
+ 	}
+ 
++	flags = EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT;
++	if (mode & FALLOC_FL_KEEP_SIZE)
++		flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
++
++	/* Preallocate the range including the unaligned edges */
++	if (partial_begin || partial_end) {
++		ret = ext4_alloc_file_blocks(file,
++				round_down(offset, 1 << blkbits) >> blkbits,
++				(round_up((offset + len), 1 << blkbits) -
++				 round_down(offset, 1 << blkbits)) >> blkbits,
++				new_size, flags, mode);
++		if (ret)
++			goto out_mutex;
++
++	}
++
++	/* Zero range excluding the unaligned edges */
+ 	if (max_blocks > 0) {
++		flags |= (EXT4_GET_BLOCKS_CONVERT_UNWRITTEN |
++			  EXT4_EX_NOCACHE);
+ 
+ 		/* Now release the pages and zero block aligned part of pages*/
+ 		truncate_pagecache_range(inode, start, end - 1);
+-- 
+2.1.0
+

filter-aarch64.sh

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the aarch64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth fmc infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia platform power ssb staging uio uwb"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs iscsi_tcp megaraid pmcraid qla1280 9pnet_rdma svcrdma xprtrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user"

filter-aarch64.sh.fedora

@@ -1,18 +0,0 @@
-#! /bin/bash
-
-# This is the aarch64 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia power ssb soundwire staging tty uio uwb w1"
-
-ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
-
-drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel pl111 radeon rockchip tegra sun4i sun4i-drm-hdmi tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-aarch64.sh.rhel

@@ -1,18 +0,0 @@
-#! /bin/bash
-
-# This is the aarch64 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
-
-ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
-
-drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel radeon rockchip tegra sun4i tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-armv7hl.sh

@@ -1,6 +1,6 @@
 #! /bin/bash
 
-# This is the x86_64 override file for the core/drivers package split.  The
+# This is the armv7hl override file for the core/drivers package split.  The
 # module directories listed here and in the generic list in filter-modules.sh
 # will be moved to the resulting kernel-modules package for this arch.
 # Anything not listed in those files will be in the kernel-core package.
@@ -9,4 +9,6 @@
 # modifications to the overrides below.  If something should be removed across
 # all arches, remove it in the default instead of per-arch.
 
-# Defaults work so no need to override
+driverdirs="atm auxdisplay bcma bluetooth fmc infiniband isdn media memstick message nfc ntb pcmcia platform ssb staging uio uwb"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs iscsi_tcp megaraid pmcraid qla1280 9pnet_rdma svcrdma xprtrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user"

filter-armv7hl.sh.fedora

@@ -1,18 +0,0 @@
-#! /bin/bash
-
-# This is the armv7hl override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn media memstick message nfc ntb pcmcia ssb soundwire staging tty uio uwb w1"
-
-ethdrvs="3com adaptec alteon altera amd atheros broadcom cadence chelsio cisco dec dlink emulex icplus mellanox micrel myricom natsemi neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis sun tehuti via wiznet xircom"
-
-drmdrvs="amd arm armada bridge ast exynos etnaviv hisilicon i2c imx meson mgag200 msm nouveau omapdrm panel pl111 radeon rockchip sti stm sun4i sun4i-drm-hdmi tegra tilcdc tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls bq27xxx_battery_hdq mlx5_vdpa"

filter-i686.sh

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the i686 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth fmc infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging uio uwb"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs iscsi_tcp megaraid pmcraid qla1280 9pnet_rdma svcrdma xprtrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation target_core_user"

filter-i686.sh.fedora

@@ -1,14 +0,0 @@
-#! /bin/bash
-
-# This is the i686 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation hid-sensor-temperature hid-sensor-humidity target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus"

filter-modules.sh

@@ -13,31 +13,26 @@
 # subsys should be in kernel-modules on all arches, please change the defaults
 # listed here.
 
-# Overrides is individual modules which need to remain in kernel-core due to deps.
-overrides="cec"
-
 # Set the default dirs/modules to filter out
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+driverdirs="atm auxdisplay bcma bluetooth fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging uio uwb"
 
-chardrvs="mwave pcmcia"
+netdrvs="appletalk dsa hamradio ieee802154 irda ppp slip usb wireless"
 
-netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
+ethdrvs="3com adaptec alteon amd atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
 
-ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs"
 
-inputdrvs="gameport tablet touchscreen"
+ttydrvs="ipwireless"
 
-scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic hisi_sas isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf"
+usbdrvs="atm wusbcore"
 
-usbdrvs="atm image misc serial wusbcore"
+fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs udf ufs"
 
-fsdrvs="affs befs coda cramfs ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+netprots="appletalk atm ax25 batman-adv bluetooth dccp dsa ieee802154 irda l2tp mac80211 mac802154 netrom nfc rds rfkill rose sctp wireless"
 
-netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+drmdrvs="ast gma500 mgag200 via nouveau"
 
-drmdrvs="amd ast gma500 i2c i915 mgag200 nouveau radeon via "
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial ism hid-asus"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs iscsi_tcp megaraid pmcraid qla1280 9pnet_rdma svcrdma xprtrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user"
 
 # Grab the arch-specific filter list overrides
 source ./filter-$2.sh
@@ -88,12 +83,6 @@ do
 	filter_dir $1 drivers/net/${netdrv}
 done
 
-# Filter the char drivers
-for char in ${chardrvs}
-do
-	filter_dir $1 drivers/char/${input}
-done
-
 # Filter the ethernet drivers
 for eth in ${ethdrvs}
 do
@@ -106,10 +95,10 @@ do
 	filter_dir $1 drivers/scsi/${scsi}
 done
 
-# Input
-for input in ${inputdrvs}
+# TTY
+for tty in ${ttydrvs}
 do
-	filter_dir $1 drivers/input/${input}
+	filter_dir $1 drivers/tty/${tty}
 done
 
 # USB
@@ -146,20 +135,6 @@ do
         filter_ko $1 ${mod}
 done
 
-# Now process the override list to bring those modules back into core
-for mod in ${overrides}
-do
-	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
-	if [ $? -ne 0 ]
-        then
-                echo "Couldn't save ${mod}.ko  Skipping."
-        else
-                grep -e "/${mod}.ko" k-d.list >> $filelist
-                mv k-d.list.tmp k-d.list
-        fi
-
-done
-
 # Go through our generated drivers list and remove the .ko files.  We'll
 # restore them later.
 for mod in `cat k-d.list`

filter-modules.sh.fedora

@@ -1,170 +0,0 @@
-#! /bin/bash
-#
-# Called as filter-modules.sh list-of-modules Arch
-
-# This script filters the modules into the kernel-core and kernel-modules
-# subpackages.  We list out subsystems/subdirs to prune from the installed
-# module directory.  What is left is put into the kernel-core package.  What is
-# pruned is contained in the kernel-modules package.
-#
-# This file contains the default subsys/subdirs to prune from all architectures.
-# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
-# that contains the set of override lists to be used instead.  If a module or
-# subsys should be in kernel-modules on all arches, please change the defaults
-# listed here.
-
-# Overrides is individual modules which need to remain in kernel-core due to deps.
-overrides="cec"
-
-# Set the default dirs/modules to filter out
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
-
-chardrvs="mwave pcmcia"
-
-netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
-
-ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
-
-inputdrvs="gameport tablet touchscreen"
-
-scsidrvs="aacraid advansys aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf wd719x"
-
-usbdrvs="atm image misc serial wusbcore"
-
-fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs jffs2 minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
-
-netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
-
-drmdrvs="amd ast bridge gma500 i2c i915 mgag200 nouveau panel radeon"
-
-iiodrvs="accel adc afe common dac gyro health humidity light magnetometer multiplexer orientation potentiometer potentiostat pressure temperature"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus iTCO_wdt rnbd-client rnbd-server mlx5_vdpa"
-
-# Grab the arch-specific filter list overrides
-source ./filter-$2.sh
-
-filter_dir() {
-	filelist=$1
-	dir=$2
-
-	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${dir}.  Skipping."
-	else
-		grep -e "${dir}/" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-filter_ko() {
-	filelist=$1
-	mod=$2
-
-	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${mod}.ko  Skipping."
-	else
-		grep -e "${mod}.ko" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-# Filter the drivers/ subsystems
-for subsys in ${driverdirs}
-do
-	filter_dir $1 drivers/${subsys}
-done
-
-# Filter the networking drivers
-for netdrv in ${netdrvs}
-do
-	filter_dir $1 drivers/net/${netdrv}
-done
-
-# Filter the char drivers
-for char in ${chardrvs}
-do
-	filter_dir $1 drivers/char/${input}
-done
-
-# Filter the ethernet drivers
-for eth in ${ethdrvs}
-do
-	filter_dir $1 drivers/net/ethernet/${eth}
-done
-
-# SCSI
-for scsi in ${scsidrvs}
-do
-	filter_dir $1 drivers/scsi/${scsi}
-done
-
-# Input
-for input in ${inputdrvs}
-do
-	filter_dir $1 drivers/input/${input}
-done
-
-# USB
-for usb in ${usbdrvs}
-do
-	filter_dir $1 drivers/usb/${usb}
-done
-
-# Filesystems
-for fs in ${fsdrvs}
-do
-	filter_dir $1 fs/${fs}
-done
-
-# Network protocols
-for prot in ${netprots}
-do
-	filter_dir $1 kernel/net/${prot}
-done
-
-# DRM
-for drm in ${drmdrvs}
-do
-	filter_dir $1 drivers/gpu/drm/${drm}
-done
-
-# Just kill sound.
-filter_dir $1 kernel/sound
-
-# Now go through and filter any single .ko files that might have deps on the
-# things we filtered above
-for mod in ${singlemods}
-do
-        filter_ko $1 ${mod}
-done
-
-# Now process the override list to bring those modules back into core
-for mod in ${overrides}
-do
-	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
-	if [ $? -ne 0 ]
-        then
-                echo "Couldn't save ${mod}.ko  Skipping."
-        else
-                grep -e "/${mod}.ko" k-d.list >> $filelist
-                mv k-d.list.tmp k-d.list
-        fi
-
-done
-
-# Go through our generated drivers list and remove the .ko files.  We'll
-# restore them later.
-for mod in `cat k-d.list`
-do
-	rm -rf $mod
-done