CVE-2016-9588 fix possible DoS in nVMX (rhbz 1404924 1404925)

- Let iio tools build on older kernels

.gitignore

@@ -1,2 +1,7 @@
+clog
 *.xz
 *.bz2
+*.rpm
+*.orig
+kernel-[234].*/
+perf-man-*.tar.gz

0001-HID-input-ignore-System-Control-application-usages-i.patch

@@ -0,0 +1,75 @@
+From 1989dada7ce07848196991c9ebf25ff9c5f14d4e Mon Sep 17 00:00:00 2001
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Tue, 13 Sep 2016 11:52:37 +0200
+Subject: [PATCH] HID: input: ignore System Control application usages if not
+ System Controls
+
+Microsoft is reusing its report descriptor again and again, and part of it
+looks like this:
+
+0x05, 0x01,                    // Usage Page (Generic Desktop)        299
+0x09, 0x80,                    // Usage (System Control)              301
+0xa1, 0x01,                    // Collection (Application)            303
+0x85, 0x03,                    //  Report ID (3)                      305
+0x19, 0x00,                    //  Usage Minimum (0)                  307
+0x29, 0xff,                    //  Usage Maximum (255)                309
+0x15, 0x00,                    //  Logical Minimum (0)                311
+0x26, 0xff, 0x00,              //  Logical Maximum (255)              313
+0x81, 0x00,                    //  Input (Data,Arr,Abs)               316
+0xc0,                          // End Collection                      318
+
+While there is nothing wrong in term of processing, we do however blindly
+map the full usage range (it's an array) from 0x00 to 0xff, which creates
+some interesting axis, like ABS_X|Y, and a bunch of ABS_MISC + n.
+
+While libinput and other stacks don't care that much (we can detect them),
+joydev is very happy and attaches itself to the mouse or keyboard.
+
+The problem is that joydev now handles the device as a joystick, but given
+that we have a HID array, it sets all the ABS_* values to 0. And in its
+world, 0 means -32767 (minimum value), which sends spurious events to games
+(think Steam).
+
+It looks like hid-microsoft tries to tackle the very same problem with its
+.report_fixup callback. But fixing the report descriptor is an endless task
+and is quite obfuscated.
+
+So take the hammer, and decide that if the application is meant to be
+System Control, any other usage not in the System Control range should
+be ignored.
+
+Link: https://bugzilla.redhat.com/show_bug.cgi?id=1325354
+Link: https://bugzilla.kernel.org/show_bug.cgi?id=28912
+Link: https://github.com/ValveSoftware/steam-for-linux/issues/3384
+Link: https://bugzilla.redhat.com/show_bug.cgi?id=1325354
+Link: https://bugzilla.kernel.org/show_bug.cgi?id=37982
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Signed-off-by: Jiri Kosina <jkosina@suse.cz>
+---
+ drivers/hid/hid-input.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
+index bcfaf32..058919d 100644
+--- a/drivers/hid/hid-input.c
++++ b/drivers/hid/hid-input.c
+@@ -604,6 +604,15 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
+ 			break;
+ 		}
+
++		/*
++		 * Some lazy vendors declare 255 usages for System Control,
++		 * leading to the creation of ABS_X|Y axis and too many others.
++		 * It wouldn't be a problem if joydev doesn't consider the
++		 * device as a joystick then.
++		 */
++		if (field->application == HID_GD_SYSTEM_CONTROL)
++			goto ignore;
++
+ 		if ((usage->hid & 0xf0) == 0x90) {	/* D-pad */
+ 			switch (usage->hid) {
+ 			case HID_GD_UP:	   usage->hat_dir = 1; break;
+-- 
+2.7.4
+

0001-iio-Use-event-header-from-kernel-tree.patch

@@ -0,0 +1,64 @@
+From 0eadbb65c0026fb4eec89c54f6b48a0febd87f92 Mon Sep 17 00:00:00 2001
+From: Laura Abbott <labbott@redhat.com>
+Date: Fri, 9 Sep 2016 08:19:17 -0700
+Subject: [PATCH] iio: Use type header from kernel tree
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+To: Jonathan Cameron <jic23@kernel.org>
+To: Hartmut Knaack <knaack.h@gmx.de>
+To: Lars-Peter Clausen <lars@metafoo.de>
+To: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
+Cc: linux-iio@vger.kernel.org
+Cc: linux-kernel@vger.kernel.org
+
+
+The iio tools have been updated as new event types have been added to
+the kernel. The tools currently use the standard system headers which
+means that the system may not have the newest defintitions. This leads
+to build failures when building newer tools on older hosts:
+
+gcc -Wall -g -D_GNU_SOURCE   -c -o iio_event_monitor.o
+iio_event_monitor.c
+iio_event_monitor.c:59:3: error: ‘IIO_UVINDEX’ undeclared here (not in a
+function)
+  [IIO_UVINDEX] = "uvindex",
+   ^~~~~~~~~~~
+iio_event_monitor.c:59:3: error: array index in initializer not of
+integer type
+iio_event_monitor.c:59:3: note: (near initialization for
+‘iio_chan_type_name_spec’)
+iio_event_monitor.c:97:3: error: ‘IIO_MOD_LIGHT_UV’ undeclared here (not
+in a function)
+  [IIO_MOD_LIGHT_UV] = "uv",
+   ^~~~~~~~~~~~~~~~
+iio_event_monitor.c:97:3: error: array index in initializer not of
+integer type
+iio_event_monitor.c:97:3: note: (near initialization for
+‘iio_modifier_names’)
+<builtin>: recipe for target 'iio_event_monitor.o' failed
+
+Switch to using the header from the kernel tree to ensure the newest
+defintions are always picked up.
+
+Signed-off-by: Laura Abbott <labbott@redhat.com>
+---
+ tools/iio/iio_event_monitor.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c
+index d9b7e0f..f02523d 100644
+--- a/tools/iio/iio_event_monitor.c
++++ b/tools/iio/iio_event_monitor.c
+@@ -26,7 +26,7 @@
+ #include <sys/ioctl.h>
+ #include "iio_utils.h"
+ #include <linux/iio/events.h>
+-#include <linux/iio/types.h>
++#include "../../include/uapi/linux/iio/types.h"
+ 
+ static const char * const iio_chan_type_name_spec[] = {
+ 	[IIO_VOLTAGE] = "voltage",
+-- 
+2.7.4
+

0001-ipv6-Avoid-creating-RTF_CACHE-from-a-rt-that-is-not-.patch

@@ -0,0 +1,91 @@
+From 0d3f6d297bfb7af24d0508460fdb3d1ec4903fa3 Mon Sep 17 00:00:00 2001
+From: Martin KaFai Lau <kafai@fb.com>
+Date: Wed, 11 Nov 2015 11:51:06 -0800
+Subject: [PATCH] ipv6: Avoid creating RTF_CACHE from a rt that is not managed
+ by fib6 tree
+
+The original bug report:
+https://bugzilla.redhat.com/show_bug.cgi?id=1272571
+
+The setup has a IPv4 GRE tunnel running in a IPSec.  The bug
+happens when ndisc starts sending router solicitation at the gre
+interface.  The simplified oops stack is like:
+
+__lock_acquire+0x1b2/0x1c30
+lock_acquire+0xb9/0x140
+_raw_write_lock_bh+0x3f/0x50
+__ip6_ins_rt+0x2e/0x60
+ip6_ins_rt+0x49/0x50
+~~~~~~~~
+__ip6_rt_update_pmtu.part.54+0x145/0x250
+ip6_rt_update_pmtu+0x2e/0x40
+~~~~~~~~
+ip_tunnel_xmit+0x1f1/0xf40
+__gre_xmit+0x7a/0x90
+ipgre_xmit+0x15a/0x220
+dev_hard_start_xmit+0x2bd/0x480
+__dev_queue_xmit+0x696/0x730
+dev_queue_xmit+0x10/0x20
+neigh_direct_output+0x11/0x20
+ip6_finish_output2+0x21f/0x770
+ip6_finish_output+0xa7/0x1d0
+ip6_output+0x56/0x190
+~~~~~~~~
+ndisc_send_skb+0x1d9/0x400
+ndisc_send_rs+0x88/0xc0
+~~~~~~~~
+
+The rt passed to ip6_rt_update_pmtu() is created by
+icmp6_dst_alloc() and it is not managed by the fib6 tree,
+so its rt6i_table == NULL.  When __ip6_rt_update_pmtu() creates
+a RTF_CACHE clone, the newly created clone also has rt6i_table == NULL
+and it causes the ip6_ins_rt() oops.
+
+During pmtu update, we only want to create a RTF_CACHE clone
+from a rt which is currently managed (or owned) by the
+fib6 tree.  It means either rt->rt6i_node != NULL or
+rt is a RTF_PCPU clone.
+
+It is worth to note that rt6i_table may not be NULL even it is
+not (yet) managed by the fib6 tree (e.g. addrconf_dst_alloc()).
+Hence, rt6i_node is a better check instead of rt6i_table.
+
+Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu")
+Signed-off-by: Martin KaFai Lau <kafai@fb.com>
+Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
+Cc: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
+Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ net/ipv6/route.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/net/ipv6/route.c b/net/ipv6/route.c
+index c8bc9b4..74907c5 100644
+--- a/net/ipv6/route.c
++++ b/net/ipv6/route.c
+@@ -1322,6 +1322,12 @@ static void rt6_do_update_pmtu(struct rt6_info *rt, u32 mtu)
+ 	rt6_update_expires(rt, net->ipv6.sysctl.ip6_rt_mtu_expires);
+ }
+
++static bool rt6_cache_allowed_for_pmtu(const struct rt6_info *rt)
++{
++	return !(rt->rt6i_flags & RTF_CACHE) &&
++		(rt->rt6i_flags & RTF_PCPU || rt->rt6i_node);
++}
++
+ static void __ip6_rt_update_pmtu(struct dst_entry *dst, const struct sock *sk,
+ 				 const struct ipv6hdr *iph, u32 mtu)
+ {
+@@ -1335,7 +1341,7 @@ static void __ip6_rt_update_pmtu(struct dst_entry *dst, const struct sock *sk,
+ 	if (mtu >= dst_mtu(dst))
+ 		return;
+
+-	if (rt6->rt6i_flags & RTF_CACHE) {
++	if (!rt6_cache_allowed_for_pmtu(rt6)) {
+ 		rt6_do_update_pmtu(rt6, mtu);
+ 	} else {
+ 		const struct in6_addr *daddr, *saddr;
+-- 
+2.5.0
+

0001-netfilter-ipv6-nf_defrag-drop-mangled-skb-on-ream-er.patch

@@ -0,0 +1,69 @@
+From 9b57da0630c9fd36ed7a20fc0f98dc82cc0777fa Mon Sep 17 00:00:00 2001
+From: Florian Westphal <fw@strlen.de>
+Date: Tue, 29 Nov 2016 02:17:34 +0100
+Subject: [PATCH] netfilter: ipv6: nf_defrag: drop mangled skb on ream error
+
+Dmitry Vyukov reported GPF in network stack that Andrey traced down to
+negative nh offset in nf_ct_frag6_queue().
+
+Problem is that all network headers before fragment header are pulled.
+Normal ipv6 reassembly will drop the skb when errors occur further down
+the line.
+
+netfilter doesn't do this, and instead passed the original fragment
+along.  That was also fine back when netfilter ipv6 defrag worked with
+cloned fragments, as the original, pristine fragment was passed on.
+
+So we either have to undo the pull op, or discard such fragments.
+Since they're malformed after all (e.g. overlapping fragment) it seems
+preferrable to just drop them.
+
+Same for temporary errors -- it doesn't make sense to accept (and
+perhaps forward!) only some fragments of same datagram.
+
+Fixes: 029f7f3b8701cc7ac ("netfilter: ipv6: nf_defrag: avoid/free clone operations")
+Reported-by: Dmitry Vyukov <dvyukov@google.com>
+Debugged-by: Andrey Konovalov <andreyknvl@google.com>
+Diagnosed-by: Eric Dumazet <Eric Dumazet <edumazet@google.com>
+Signed-off-by: Florian Westphal <fw@strlen.de>
+Acked-by: Eric Dumazet <edumazet@google.com>
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+---
+ net/ipv6/netfilter/nf_conntrack_reasm.c   | 4 ++--
+ net/ipv6/netfilter/nf_defrag_ipv6_hooks.c | 2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
+index e4347ae..9948b5c 100644
+--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
++++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
+@@ -576,11 +576,11 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user)
+ 	/* Jumbo payload inhibits frag. header */
+ 	if (ipv6_hdr(skb)->payload_len == 0) {
+ 		pr_debug("payload len = 0\n");
+-		return -EINVAL;
++		return 0;
+ 	}
+
+ 	if (find_prev_fhdr(skb, &prevhdr, &nhoff, &fhoff) < 0)
+-		return -EINVAL;
++		return 0;
+
+ 	if (!pskb_may_pull(skb, fhoff + sizeof(*fhdr)))
+ 		return -ENOMEM;
+diff --git a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
+index f7aab5a..f06b047 100644
+--- a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
++++ b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
+@@ -69,7 +69,7 @@ static unsigned int ipv6_defrag(void *priv,
+ 	if (err == -EINPROGRESS)
+ 		return NF_STOLEN;
+
+-	return NF_ACCEPT;
++	return err == 0 ? NF_ACCEPT : NF_DROP;
+ }
+
+ static struct nf_hook_ops ipv6_defrag_ops[] = {
+-- 
+2.9.3
+

0001-x86-cpu-cacheinfo-Fix-teardown-path.patch

@@ -0,0 +1,86 @@
+From 680ac028240f8747f31c03986fbcf18b2b521e93 Mon Sep 17 00:00:00 2001
+From: Borislav Petkov <bp@suse.de>
+Date: Mon, 27 Jul 2015 09:58:05 +0200
+Subject: [PATCH] x86/cpu/cacheinfo: Fix teardown path
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Philip Müller reported a hang when booting 32-bit 4.1 kernel on
+an AMD box. A fragment of the splat was enough to pinpoint the
+issue:
+
+  task: f58e0000 ti: f58e8000 task.ti: f58e800
+  EIP: 0060:[<c135a903>] EFLAGS: 00010206 CPU: 0
+  EIP is at free_cache_attributes+0x83/0xd0
+  EAX: 00000001 EBX: f589d46c ECX: 00000090 EDX: 360c2000
+  ESI: 00000000 EDI: c1724a80 EBP: f58e9ec0 ESP: f58e9ea0
+   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
+  CR0: 8005003b CR2: 000000ac CR3: 01731000 CR4: 000006d0
+
+cache_shared_cpu_map_setup() did check sibling CPUs cacheinfo
+descriptor while the respective teardown path
+cache_shared_cpu_map_remove() didn't. Fix that.
+
+From tglx's version: to be on the safe side, move the cacheinfo
+descriptor check to free_cache_attributes(), thus cleaning up
+the hotplug path a little and making this even more robust.
+
+Reported-by: Philip Müller <philm@manjaro.org>
+Signed-off-by: Borislav Petkov <bp@suse.de>
+Cc: <stable@vger.kernel.org> # v4.1+
+Cc: Andre Przywara <andre.przywara@arm.com>
+Cc: Guenter Roeck <linux@roeck-us.net>
+Cc: H. Peter Anvin <hpa@zytor.com>
+Cc: Linus Torvalds <torvalds@linux-foundation.org>
+Cc: Peter Zijlstra <peterz@infradead.org>
+Cc: Sudeep Holla <sudeep.holla@arm.com>
+Cc: Thomas Gleixner <tglx@linutronix.de>
+Cc: linux-kernel@vger.kernel.org
+Cc: manjaro-dev@manjaro.org
+Link: http://lkml.kernel.org/r/20150727075805.GA20416@nazgul.tnic
+Link: https://lkml.kernel.org/r/55B47BB8.6080202@manjaro.org
+Signed-off-by: Ingo Molnar <mingo@kernel.org>
+---
+ drivers/base/cacheinfo.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/base/cacheinfo.c b/drivers/base/cacheinfo.c
+index 764280a91776..e9fd32e91668 100644
+--- a/drivers/base/cacheinfo.c
++++ b/drivers/base/cacheinfo.c
+@@ -148,7 +148,11 @@ static void cache_shared_cpu_map_remove(unsigned int cpu)
+ 
+ 			if (sibling == cpu) /* skip itself */
+ 				continue;
++
+ 			sib_cpu_ci = get_cpu_cacheinfo(sibling);
++			if (!sib_cpu_ci->info_list)
++				continue;
++
+ 			sib_leaf = sib_cpu_ci->info_list + index;
+ 			cpumask_clear_cpu(cpu, &sib_leaf->shared_cpu_map);
+ 			cpumask_clear_cpu(sibling, &this_leaf->shared_cpu_map);
+@@ -159,6 +163,9 @@ static void cache_shared_cpu_map_remove(unsigned int cpu)
+ 
+ static void free_cache_attributes(unsigned int cpu)
+ {
++	if (!per_cpu_cacheinfo(cpu))
++		return;
++
+ 	cache_shared_cpu_map_remove(cpu);
+ 
+ 	kfree(per_cpu_cacheinfo(cpu));
+@@ -514,8 +521,7 @@ static int cacheinfo_cpu_callback(struct notifier_block *nfb,
+ 		break;
+ 	case CPU_DEAD:
+ 		cache_remove_dev(cpu);
+-		if (per_cpu_cacheinfo(cpu))
+-			free_cache_attributes(cpu);
++		free_cache_attributes(cpu);
+ 		break;
+ 	}
+ 	return notifier_from_errno(rc);
+-- 
+2.4.3
+

ACPI-Limit-access-to-custom_method.patch

@@ -0,0 +1,31 @@
+From 4b85149b764cd024e3dd2aff9eb22a9e1aadd1fa Mon Sep 17 00:00:00 2001
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Mar 2012 08:39:37 -0500
+Subject: [PATCH 04/20] ACPI: Limit access to custom_method
+
+custom_method effectively allows arbitrary access to system memory, making
+it possible for an attacker to circumvent restrictions on module loading.
+Disable it if any such restrictions have been enabled.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/acpi/custom_method.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/acpi/custom_method.c b/drivers/acpi/custom_method.c
+index c68e72414a67..4277938af700 100644
+--- a/drivers/acpi/custom_method.c
++++ b/drivers/acpi/custom_method.c
+@@ -29,6 +29,9 @@ static ssize_t cm_write(struct file *file, const char __user * user_buf,
+ 	struct acpi_table_header table;
+ 	acpi_status status;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (!(*ppos)) {
+ 		/* parse the table header to get the table length */
+ 		if (count <= sizeof(struct acpi_table_header))
+-- 
+2.4.3
+

ARM-Drop-fixed-200-Hz-timer-requirement-from-Samsung-platforms.patch

@@ -0,0 +1,88 @@
+From patchwork Fri Nov 18 11:15:12 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v3] ARM: Drop fixed 200 Hz timer requirement from Samsung platforms
+From: Krzysztof Kozlowski <krzk@kernel.org>
+X-Patchwork-Id: 9436225
+Message-Id: <1479467712-5218-1-git-send-email-krzk@kernel.org>
+To: Russell King <linux@armlinux.org.uk>, Kukjin Kim <kgene@kernel.org>,
+ Krzysztof Kozlowski <krzk@kernel.org>,
+ Javier Martinez Canillas <javier@osg.samsung.com>,
+ linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, 
+ linux-kernel@vger.kernel.org
+Cc: Arnd Bergmann <arnd@arndb.de>,
+ Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
+ Tomasz Figa <tomasz.figa@gmail.com>,
+ Ben Dooks <ben.dooks@codethink.co.uk>, 
+ Sylwester Nawrocki <s.nawrocki@samsung.com>,
+ Lee Jones <lee.jones@linaro.org>, 
+ Marek Szyprowski <m.szyprowski@samsung.com>
+Date: Fri, 18 Nov 2016 13:15:12 +0200
+
+All Samsung platforms, including the Exynos, are selecting HZ_FIXED with
+200 Hz.  Unfortunately in case of multiplatform image this affects also
+other platforms when Exynos is enabled.
+
+This looks like an very old legacy code, dating back to initial
+upstreaming of S3C24xx.  Probably it was required for s3c24xx timer
+driver, which was removed in commit ad38bdd15d5b ("ARM: SAMSUNG: Remove
+unused plat-samsung/time.c").
+
+Since then, this fixed 200 Hz spread everywhere, including out-of-tree
+Samsung kernels (SoC vendor's and Tizen's).  I believe this choice
+was rather an effect of coincidence instead of conscious choice.
+
+On S3C24xx, the PWM counter is only 16 bit wide, and with the
+typical 12MHz input clock that overflows every 5.5ms.  This works
+with HZ=200 or higher but not with HZ=100 which needs a 10ms
+interval between ticks.  On Later chips (S3C64xx, S5P and EXYNOS),
+the counter is 32 bits and does not have this problem.
+
+The new samsung_pwm_timer driver solves the problem by scaling the input
+clock by a factor of 50 on S3C24xx, which makes it less accurate but
+allows HZ=100 as well as CONFIG_NO_HZ with fewer wakeups.
+
+Few perf mem and sched tests on Odroid XU3 board (Exynos5422, 4x Cortex
+A7, 4x Cortex A15) show no regressions when switching from 200 Hz to
+other values.
+
+Reported-by: Lee Jones <lee.jones@linaro.org>
+[Dropping of 200_HZ from S3C/S5P was suggested by Arnd]
+Reported-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
+Cc: Kukjin Kim <kgene@kernel.org>
+[Tested on Exynos5800]
+Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
+Acked-by: Kukjin Kim <kgene@kernel.org>
+[Tested on S3C2440]
+Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
+---
+
+Changes since v2:
+1. Extend message.
+2. Add Kukjin's ack.
+3. Add Sylwester's tested-by.
+
+Changes since v1:
+1. Add Javier's tested-by.
+2. Drop HZ_FIXED also from ARCH_S5PV210 and ARCH_S3C24XX after Arnd
+   suggestions and analysis.
+---
+ arch/arm/Kconfig | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index b5d529fdffab..ced2e08a9d08 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1496,8 +1496,7 @@ source kernel/Kconfig.preempt
+ 
+ config HZ_FIXED
+ 	int
+-	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
+-		ARCH_S5PV210 || ARCH_EXYNOS4
++	default 200 if ARCH_EBSA110
+ 	default 128 if SOC_AT91RM9200
+ 	default 0
+ 

ARM-OMAP4-Fix-crashes.patch

@@ -0,0 +1,97 @@
+From patchwork Wed Oct 26 15:17:01 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [3/5] ARM: OMAP4+: Fix bad fallthrough for cpuidle
+From: Tony Lindgren <tony@atomide.com>
+X-Patchwork-Id: 9397501
+Message-Id: <20161026151703.24730-4-tony@atomide.com>
+To: linux-omap@vger.kernel.org
+Cc: Nishanth Menon <nm@ti.com>, Dmitry Lifshitz <lifshitz@compulab.co.il>,
+ Dave Gerlach <d-gerlach@ti.com>,
+ Enric Balletbo Serra <eballetbo@gmail.com>, 
+ "Dr . H . Nikolaus Schaller" <hns@goldelico.com>,
+ Pau Pajuel <ppajuel@gmail.com>, Grazvydas Ignotas <notasas@gmail.com>,
+ Benoit Cousson <bcousson@baylibre.com>,
+ Santosh Shilimkar <ssantosh@kernel.org>,
+ Javier Martinez Canillas <javier@dowhile0.org>,
+ Robert Nelson <robertcnelson@gmail.com>,
+ Marek Belisko <marek@goldelico.com>, linux-arm-kernel@lists.infradead.org
+Date: Wed, 26 Oct 2016 08:17:01 -0700
+
+We don't want to fall through to a bunch of errors for retention
+if PM_OMAP4_CPU_OSWR_DISABLE is not configured for a SoC.
+
+Fixes: 6099dd37c669 ("ARM: OMAP5 / DRA7: Enable CPU RET on suspend")
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+---
+ arch/arm/mach-omap2/omap-mpuss-lowpower.c | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
++++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+@@ -244,10 +244,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
+ 		save_state = 1;
+ 		break;
+ 	case PWRDM_POWER_RET:
+-		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) {
++		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
+ 			save_state = 0;
+-			break;
+-		}
++		break;
+ 	default:
+ 		/*
+ 		 * CPUx CSWR is invalid hardware state. Also CPUx OSWR
+From 5a78ff7bf7e25191144b550961001bbf6c734da4 Mon Sep 17 00:00:00 2001
+From: Peter Chen <peter.chen@nxp.com>
+Date: Thu, 11 Aug 2016 17:44:54 +0800
+Subject: [PATCH 04152/16809] Revert "gpu: drm: omapdrm: dss-of: add missing
+ of_node_put after calling of_parse_phandle"
+
+This reverts
+commit 2ab9f5879162499e1c4e48613287e3f59e593c4f
+Author: Peter Chen <peter.chen@nxp.com>
+Date:   Fri Jul 15 11:17:03 2016 +0800
+    gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle
+
+The of_get_next_parent will drop refcount on the passed node, so the reverted
+patch is wrong, thanks for Tomi Valkeinen points it.
+
+Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
+Signed-off-by: Peter Chen <peter.chen@nxp.com>
+Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
+Signed-off-by: Sean Paul <seanpaul@chromium.org>
+Link: http://patchwork.freedesktop.org/patch/msgid/1470908694-16362-1-git-send-email-peter.chen@nxp.com
+---
+ drivers/gpu/drm/omapdrm/dss/dss-of.c | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/gpu/drm/omapdrm/dss/dss-of.c b/drivers/gpu/drm/omapdrm/dss/dss-of.c
+index e256d87..dfd4e96 100644
+--- a/drivers/gpu/drm/omapdrm/dss/dss-of.c
++++ b/drivers/gpu/drm/omapdrm/dss/dss-of.c
+@@ -125,16 +125,15 @@ u32 dss_of_port_get_port_number(struct device_node *port)
+ 
+ static struct device_node *omapdss_of_get_remote_port(const struct device_node *node)
+ {
+-	struct device_node *np, *np_parent;
++	struct device_node *np;
+ 
+ 	np = of_parse_phandle(node, "remote-endpoint", 0);
+ 	if (!np)
+ 		return NULL;
+ 
+-	np_parent = of_get_next_parent(np);
+-	of_node_put(np);
++	np = of_get_next_parent(np);
+ 
+-	return np_parent;
++	return np;
+ }
+ 
+ struct device_node *
+-- 
+2.9.3
+

ARM-tegra-usb-no-reset.patch

@@ -0,0 +1,28 @@
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 3 May 2012 20:27:11 +0100
+Subject: [PATCH] ARM: tegra: usb no reset
+
+Patch for disconnect issues with storage attached to a
+ tegra-ehci controller
+---
+ drivers/usb/core/hub.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index 43cb2f2e3b43..7f838ec11c81 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct *work)
+ 			(u16) hub->change_bits[0],
+ 			(u16) hub->event_bits[0]);
+ 
++	/* Don't disconnect USB-SATA on TrimSlice */
++	if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
++		if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
++				(hub->event_bits[0] == 0x2))
++			hub->event_bits[0] = 0;
++	}
++
+ 	/* Lock the device, then check to see if we were
+ 	 * disconnected while waiting for the lock to succeed. */
+ 	usb_lock_device(hdev);

Add-EFI-signature-data-types.patch

@@ -0,0 +1,54 @@
+From 5216de8394ff599e41c8540c0572368c18c51459 Mon Sep 17 00:00:00 2001
+From: Dave Howells <dhowells@redhat.com>
+Date: Tue, 23 Oct 2012 09:30:54 -0400
+Subject: [PATCH 4/9] Add EFI signature data types
+
+Add the data types that are used for containing hashes, keys and certificates
+for cryptographic verification.
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard for now
+
+Signed-off-by: David Howells <dhowells@redhat.com>
+---
+ include/linux/efi.h | 20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index 8cb38cfcba74..8c274b4ea8e6 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -647,6 +647,9 @@ void efi_native_runtime_setup(void);
+ #define LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID	EFI_GUID(0xe03fc20a, 0x85dc, 0x406e,  0xb9, 0x0e, 0x4a, 0xb5, 0x02, 0x37, 0x1d, 0x95)
+ #define LINUX_EFI_LOADER_ENTRY_GUID		EFI_GUID(0x4a67b082, 0x0a4c, 0x41cf,  0xb6, 0xc7, 0x44, 0x0b, 0x29, 0xbb, 0x8c, 0x4f)
+ 
++#define EFI_CERT_SHA256_GUID			EFI_GUID(0xc1c41626, 0x504c, 0x4092,  0xac, 0xa9, 0x41, 0xf9, 0x36, 0x93, 0x43, 0x28)
++#define EFI_CERT_X509_GUID			EFI_GUID(0xa5c059a1, 0x94e4, 0x4aa7,  0x87, 0xb5, 0xab, 0x15, 0x5c, 0x2b, 0xf0, 0x72)
++
+ typedef struct {
+ 	efi_guid_t guid;
+ 	u64 table;
+@@ -879,6 +885,20 @@ typedef struct {
+ 	efi_memory_desc_t entry[0];
+ } efi_memory_attributes_table_t;
+ 
++typedef struct  {
++	efi_guid_t signature_owner;
++	u8 signature_data[];
++} efi_signature_data_t;
++
++typedef struct {
++	efi_guid_t signature_type;
++	u32 signature_list_size;
++	u32 signature_header_size;
++	u32 signature_size;
++	u8 signature_header[];
++	/* efi_signature_data_t signatures[][] */
++} efi_signature_list_t;
++
+ /*
+  * All runtime access to EFI goes through this structure:
+  */
+-- 
+2.5.5
+

Add-an-EFI-signature-blob-parser-and-key-loader.patch

@@ -0,0 +1,179 @@
+From e36a2d65e25fdf42b50aa5dc17583d7bfd09c4c4 Mon Sep 17 00:00:00 2001
+From: Dave Howells <dhowells@redhat.com>
+Date: Tue, 23 Oct 2012 09:36:28 -0400
+Subject: [PATCH 5/9] Add an EFI signature blob parser and key loader.
+
+X.509 certificates are loaded into the specified keyring as asymmetric type
+keys.
+
+[labbott@fedoraproject.org: Drop KEY_ALLOC_TRUSTED]
+Signed-off-by: David Howells <dhowells@redhat.com>
+---
+ crypto/asymmetric_keys/Kconfig      |   8 +++
+ crypto/asymmetric_keys/Makefile     |   1 +
+ crypto/asymmetric_keys/efi_parser.c | 108 ++++++++++++++++++++++++++++++++++++
+ include/linux/efi.h                 |   4 ++
+ 4 files changed, 121 insertions(+)
+ create mode 100644 crypto/asymmetric_keys/efi_parser.c
+
+diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
+index e28e912000a7..94024e8aedaa 100644
+--- a/crypto/asymmetric_keys/Kconfig
++++ b/crypto/asymmetric_keys/Kconfig
+@@ -60,4 +60,12 @@ config SIGNED_PE_FILE_VERIFICATION
+ 	  This option provides support for verifying the signature(s) on a
+ 	  signed PE binary.
+ 
++config EFI_SIGNATURE_LIST_PARSER
++	bool "EFI signature list parser"
++	depends on EFI
++	select X509_CERTIFICATE_PARSER
++	help
++	  This option provides support for parsing EFI signature lists for
++	  X.509 certificates and turning them into keys.
++
+ endif # ASYMMETRIC_KEY_TYPE
+diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
+index 6516855bec18..c099fe15ed6d 100644
+--- a/crypto/asymmetric_keys/Makefile
++++ b/crypto/asymmetric_keys/Makefile
+@@ -10,6 +10,7 @@ asymmetric_keys-y := \
+ 	signature.o
+ 
+ obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
++obj-$(CONFIG_EFI_SIGNATURE_LIST_PARSER) += efi_parser.o
+ 
+ #
+ # X.509 Certificate handling
+diff --git a/crypto/asymmetric_keys/efi_parser.c b/crypto/asymmetric_keys/efi_parser.c
+new file mode 100644
+index 000000000000..636feb18b733
+--- /dev/null
++++ b/crypto/asymmetric_keys/efi_parser.c
+@@ -0,0 +1,108 @@
++/* EFI signature/key/certificate list parser
++ *
++ * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
++ * Written by David Howells (dhowells@redhat.com)
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public Licence
++ * as published by the Free Software Foundation; either version
++ * 2 of the Licence, or (at your option) any later version.
++ */
++
++#define pr_fmt(fmt) "EFI: "fmt
++#include <linux/module.h>
++#include <linux/printk.h>
++#include <linux/err.h>
++#include <linux/efi.h>
++#include <keys/asymmetric-type.h>
++
++static __initdata efi_guid_t efi_cert_x509_guid = EFI_CERT_X509_GUID;
++
++/**
++ * parse_efi_signature_list - Parse an EFI signature list for certificates
++ * @data: The data blob to parse
++ * @size: The size of the data blob
++ * @keyring: The keyring to add extracted keys to
++ */
++int __init parse_efi_signature_list(const void *data, size_t size, struct key *keyring)
++{
++	unsigned offs = 0;
++	size_t lsize, esize, hsize, elsize;
++
++	pr_devel("-->%s(,%zu)\n", __func__, size);
++
++	while (size > 0) {
++		efi_signature_list_t list;
++		const efi_signature_data_t *elem;
++		key_ref_t key;
++
++		if (size < sizeof(list))
++			return -EBADMSG;
++
++		memcpy(&list, data, sizeof(list));
++		pr_devel("LIST[%04x] guid=%pUl ls=%x hs=%x ss=%x\n",
++			 offs,
++			 list.signature_type.b, list.signature_list_size,
++			 list.signature_header_size, list.signature_size);
++
++		lsize = list.signature_list_size;
++		hsize = list.signature_header_size;
++		esize = list.signature_size;
++		elsize = lsize - sizeof(list) - hsize;
++
++		if (lsize > size) {
++			pr_devel("<--%s() = -EBADMSG [overrun @%x]\n",
++				 __func__, offs);
++			return -EBADMSG;
++		}
++		if (lsize < sizeof(list) ||
++		    lsize - sizeof(list) < hsize ||
++		    esize < sizeof(*elem) ||
++		    elsize < esize ||
++		    elsize % esize != 0) {
++			pr_devel("- bad size combo @%x\n", offs);
++			return -EBADMSG;
++		}
++
++		if (efi_guidcmp(list.signature_type, efi_cert_x509_guid) != 0) {
++			data += lsize;
++			size -= lsize;
++			offs += lsize;
++			continue;
++		}
++
++		data += sizeof(list) + hsize;
++		size -= sizeof(list) + hsize;
++		offs += sizeof(list) + hsize;
++
++		for (; elsize > 0; elsize -= esize) {
++			elem = data;
++
++			pr_devel("ELEM[%04x]\n", offs);
++
++			key = key_create_or_update(
++				make_key_ref(keyring, 1),
++				"asymmetric",
++				NULL,
++				&elem->signature_data,
++				esize - sizeof(*elem),
++				(KEY_POS_ALL & ~KEY_POS_SETATTR) |
++				KEY_USR_VIEW,
++				KEY_ALLOC_NOT_IN_QUOTA);
++
++			if (IS_ERR(key))
++				pr_err("Problem loading in-kernel X.509 certificate (%ld)\n",
++				       PTR_ERR(key));
++			else
++				pr_notice("Loaded cert '%s' linked to '%s'\n",
++					  key_ref_to_ptr(key)->description,
++					  keyring->description);
++
++			data += esize;
++			size -= esize;
++			offs += esize;
++		}
++	}
++
++	return 0;
++}
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index 8c274b4ea8e6..ff1877145aa4 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -1044,6 +1044,10 @@ extern int efi_memattr_apply_permissions(struct mm_struct *mm,
+ char * __init efi_md_typeattr_format(char *buf, size_t size,
+ 				     const efi_memory_desc_t *md);
+ 
++struct key;
++extern int __init parse_efi_signature_list(const void *data, size_t size,
++					   struct key *keyring);
++
+ /**
+  * efi_range_is_wc - check the WC bit on an address range
+  * @start: starting kvirt address
+-- 
+2.5.5
+

Add-option-to-automatically-enforce-module-signature.patch

@@ -0,0 +1,217 @@
+From 0000dc9edd5997cc49b8893a9d5407f89dfa1307 Mon Sep 17 00:00:00 2001
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Aug 2013 18:36:30 -0400
+Subject: [PATCH] Add option to automatically enforce module signatures when in
+ Secure Boot mode
+
+UEFI Secure Boot provides a mechanism for ensuring that the firmware will
+only load signed bootloaders and kernels. Certain use cases may also
+require that all kernel modules also be signed. Add a configuration option
+that enforces this automatically when enabled.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ Documentation/x86/zero-page.txt       |  2 ++
+ arch/x86/Kconfig                      | 11 ++++++
+ arch/x86/boot/compressed/eboot.c      | 66 +++++++++++++++++++++++++++++++++++
+ arch/x86/include/uapi/asm/bootparam.h |  3 +-
+ arch/x86/kernel/setup.c               |  6 ++++
+ include/linux/module.h                |  6 ++++
+ kernel/module.c                       |  7 ++++
+ 7 files changed, 100 insertions(+), 1 deletion(-)
+
+diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
+index 95a4d34af3fd..b8527c6b7646 100644
+--- a/Documentation/x86/zero-page.txt
++++ b/Documentation/x86/zero-page.txt
+@@ -31,6 +31,8 @@ Offset	Proto	Name		Meaning
+ 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
+ 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
+ 				(below)
++1EB/001	ALL     kbd_status      Numlock is enabled
++1EC/001	ALL     secure_boot	Secure boot is enabled in the firmware
+ 1EF/001	ALL	sentinel	Used to detect broken bootloaders
+ 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
+ 2D0/A00	ALL	e820_map	E820 memory map table
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 0a7b885964ba..29b8ba9ae713 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -1776,6 +1776,17 @@ config EFI_MIXED
+ 
+ 	   If unsure, say N.
+ 
++config EFI_SECURE_BOOT_SIG_ENFORCE
++	def_bool n
++	depends on EFI
++	prompt "Force module signing when UEFI Secure Boot is enabled"
++	---help---
++	  UEFI Secure Boot provides a mechanism for ensuring that the
++	  firmware will only load signed bootloaders and kernels. Certain
++	  use cases may also require that all kernel modules also be signed.
++	  Say Y here to automatically enable module signature enforcement
++	  when a system boots with UEFI Secure Boot enabled.
++
+ config SECCOMP
+ 	def_bool y
+ 	prompt "Enable seccomp to safely compute untrusted bytecode"
+diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
+index 52fef606bc54..6b8b9a775b46 100644
+--- a/arch/x86/boot/compressed/eboot.c
++++ b/arch/x86/boot/compressed/eboot.c
+@@ -12,6 +12,7 @@
+ #include <asm/efi.h>
+ #include <asm/setup.h>
+ #include <asm/desc.h>
++#include <asm/bootparam_utils.h>
+ 
+ #include "../string.h"
+ #include "eboot.h"
+@@ -571,6 +572,67 @@ free_handle:
+ 	efi_call_early(free_pool, pci_handle);
+ }
+ 
++static int get_secure_boot(void)
++{
++	u8 sb, setup;
++	unsigned long datasize = sizeof(sb);
++	efi_guid_t var_guid = EFI_GLOBAL_VARIABLE_GUID;
++	efi_status_t status;
++
++	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
++				L"SecureBoot", &var_guid, NULL, &datasize, &sb);
++
++	if (status != EFI_SUCCESS)
++		return 0;
++
++	if (sb == 0)
++		return 0;
++
++
++	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
++				L"SetupMode", &var_guid, NULL, &datasize,
++				&setup);
++
++	if (status != EFI_SUCCESS)
++		return 0;
++
++	if (setup == 1)
++		return 0;
++
++	return 1;
++}
++
++
++/*
++ * See if we have Graphics Output Protocol
++ */
++static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
++			      unsigned long size)
++{
++	efi_status_t status;
++	void **gop_handle = NULL;
++
++	status = efi_call_early(allocate_pool, EFI_LOADER_DATA,
++				size, (void **)&gop_handle);
++	if (status != EFI_SUCCESS)
++		return status;
++
++	status = efi_call_early(locate_handle,
++				EFI_LOCATE_BY_PROTOCOL,
++				proto, NULL, &size, gop_handle);
++	if (status != EFI_SUCCESS)
++		goto free_handle;
++
++	if (efi_early->is64)
++		status = setup_gop64(si, proto, size, gop_handle);
++	else
++		status = setup_gop32(si, proto, size, gop_handle);
++
++free_handle:
++	efi_call_early(free_pool, gop_handle);
++	return status;
++}
++
+ static efi_status_t
+ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
+ {
+@@ -1126,6 +1188,10 @@ struct boot_params *efi_main(struct efi_config *c,
+ 	else
+ 		setup_boot_services32(efi_early);
+ 
++	sanitize_boot_params(boot_params);
++
++	boot_params->secure_boot = get_secure_boot();
++
+ 	setup_graphics(boot_params);
+ 
+ 	setup_efi_pci(boot_params);
+diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
+index c18ce67495fa..2b3e5427097b 100644
+--- a/arch/x86/include/uapi/asm/bootparam.h
++++ b/arch/x86/include/uapi/asm/bootparam.h
+@@ -134,7 +134,8 @@ struct boot_params {
+ 	__u8  eddbuf_entries;				/* 0x1e9 */
+ 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
+ 	__u8  kbd_status;				/* 0x1eb */
+-	__u8  _pad5[3];					/* 0x1ec */
++	__u8  secure_boot;				/* 0x1ec */
++	__u8  _pad5[2];					/* 0x1ed */
+ 	/*
+ 	 * The sentinel is set to a nonzero value (0xff) in header.S.
+ 	 *
+diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
+index c4e7b3991b60..bdb9881c7afd 100644
+--- a/arch/x86/kernel/setup.c
++++ b/arch/x86/kernel/setup.c
+@@ -1152,6 +1152,12 @@ void __init setup_arch(char **cmdline_p)
+ 
+ 	io_delay_init();
+ 
++#ifdef CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE
++	if (boot_params.secure_boot) {
++		enforce_signed_modules();
++	}
++#endif
++
+ 	/*
+ 	 * Parse the ACPI tables for possible boot-time SMP configuration.
+ 	 */
+diff --git a/include/linux/module.h b/include/linux/module.h
+index 082298a09df1..38d0597f7615 100644
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -273,6 +273,12 @@ const struct exception_table_entry *search_exception_tables(unsigned long add);
+ 
+ struct notifier_block;
+ 
++#ifdef CONFIG_MODULE_SIG
++extern void enforce_signed_modules(void);
++#else
++static inline void enforce_signed_modules(void) {};
++#endif
++
+ #ifdef CONFIG_MODULES
+ 
+ extern int modules_disabled; /* for sysctl */
+diff --git a/kernel/module.c b/kernel/module.c
+index 3c384968f553..ea484f3a35b2 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -4200,6 +4200,13 @@ void module_layout(struct module *mod,
+ EXPORT_SYMBOL(module_layout);
+ #endif
+ 
++#ifdef CONFIG_MODULE_SIG
++void enforce_signed_modules(void)
++{
++	sig_enforce = true;
++}
++#endif
++
+ bool secure_modules(void)
+ {
+ #ifdef CONFIG_MODULE_SIG
+-- 
+2.5.5
+

Add-secure_modules-call.patch

@@ -0,0 +1,63 @@
+From 3213f1513a744fb21b6b9e4d4f2650a204855b3e Mon Sep 17 00:00:00 2001
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Aug 2013 17:58:15 -0400
+Subject: [PATCH] Add secure_modules() call
+
+Provide a single call to allow kernel code to determine whether the system
+has been configured to either disable module loading entirely or to load
+only modules signed with a trusted key.
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard.  Replaced by securelevels, but that was nak'd
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ include/linux/module.h |  6 ++++++
+ kernel/module.c        | 10 ++++++++++
+ 2 files changed, 16 insertions(+)
+
+diff --git a/include/linux/module.h b/include/linux/module.h
+index 0c3207d..05bd6c9 100644
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -641,6 +641,8 @@ static inline bool is_livepatch_module(struct module *mod)
+ }
+ #endif /* CONFIG_LIVEPATCH */
+ 
++extern bool secure_modules(void);
++
+ #else /* !CONFIG_MODULES... */
+ 
+ static inline struct module *__module_address(unsigned long addr)
+@@ -750,6 +752,10 @@ static inline bool module_requested_async_probing(struct module *module)
+ 	return false;
+ }
+ 
++static inline bool secure_modules(void)
++{
++	return false;
++}
+ #endif /* CONFIG_MODULES */
+ 
+ #ifdef CONFIG_SYSFS
+diff --git a/kernel/module.c b/kernel/module.c
+index 529efae..0332fdd 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -4279,3 +4279,13 @@ void module_layout(struct module *mod,
+ }
+ EXPORT_SYMBOL(module_layout);
+ #endif
++
++bool secure_modules(void)
++{
++#ifdef CONFIG_MODULE_SIG
++	return (sig_enforce || modules_disabled);
++#else
++	return modules_disabled;
++#endif
++}
++EXPORT_SYMBOL(secure_modules);
+-- 
+2.9.2
+

Add-sysrq-option-to-disable-secure-boot-mode.patch

@@ -0,0 +1,246 @@
+From 16d2ba5d5bc46e67e6aa7a3d113fbcc18c217388 Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@redhat.com>
+Date: Fri, 30 Aug 2013 09:28:51 -0400
+Subject: [PATCH 20/20] Add sysrq option to disable secure boot mode
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ arch/x86/kernel/setup.c     | 36 ++++++++++++++++++++++++++++++++++++
+ drivers/input/misc/uinput.c |  1 +
+ drivers/tty/sysrq.c         | 19 +++++++++++++------
+ include/linux/input.h       |  5 +++++
+ include/linux/sysrq.h       |  8 +++++++-
+ kernel/debug/kdb/kdb_main.c |  2 +-
+ kernel/module.c             |  2 +-
+ 7 files changed, 64 insertions(+), 9 deletions(-)
+
+diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
+index f93826b8522c..41679b1aca83 100644
+--- a/arch/x86/kernel/setup.c
++++ b/arch/x86/kernel/setup.c
+@@ -70,6 +70,11 @@
+ #include <linux/tboot.h>
+ #include <linux/jiffies.h>
+ 
++#include <linux/fips.h>
++#include <linux/cred.h>
++#include <linux/sysrq.h>
++#include <linux/init_task.h>
++
+ #include <video/edid.h>
+ 
+ #include <asm/mtrr.h>
+@@ -1261,6 +1266,37 @@ void __init i386_reserve_resources(void)
+ 
+ #endif /* CONFIG_X86_32 */
+ 
++#ifdef CONFIG_MAGIC_SYSRQ
++#ifdef CONFIG_MODULE_SIG
++extern bool sig_enforce;
++#endif
++
++static void sysrq_handle_secure_boot(int key)
++{
++	if (!efi_enabled(EFI_SECURE_BOOT))
++		return;
++
++	pr_info("Secure boot disabled\n");
++#ifdef CONFIG_MODULE_SIG
++	sig_enforce = fips_enabled;
++#endif
++}
++static struct sysrq_key_op secure_boot_sysrq_op = {
++	.handler	=	sysrq_handle_secure_boot,
++	.help_msg	=	"unSB(x)",
++	.action_msg	=	"Disabling Secure Boot restrictions",
++	.enable_mask	=	SYSRQ_DISABLE_USERSPACE,
++};
++static int __init secure_boot_sysrq(void)
++{
++	if (efi_enabled(EFI_SECURE_BOOT))
++		register_sysrq_key('x', &secure_boot_sysrq_op);
++	return 0;
++}
++late_initcall(secure_boot_sysrq);
++#endif /*CONFIG_MAGIC_SYSRQ*/
++
++
+ static struct notifier_block kernel_offset_notifier = {
+ 	.notifier_call = dump_kernel_offset
+ };
+diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
+index 345df9b03aed..dea6a6c4a39b 100644
+--- a/drivers/input/misc/uinput.c
++++ b/drivers/input/misc/uinput.c
+@@ -364,6 +364,7 @@ static int uinput_allocate_device(struct uinput_device *udev)
+ 	if (!udev->dev)
+ 		return -ENOMEM;
+ 
++	udev->dev->flags |= INPUTDEV_FLAGS_SYNTHETIC;
+ 	udev->dev->event = uinput_dev_event;
+ 	input_set_drvdata(udev->dev, udev);
+ 
+diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
+index 95b330a9ea98..dfa3e154a719 100644
+--- a/drivers/tty/sysrq.c
++++ b/drivers/tty/sysrq.c
+@@ -472,6 +472,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
+ 	/* x: May be registered on mips for TLB dump */
+ 	/* x: May be registered on ppc/powerpc for xmon */
+ 	/* x: May be registered on sparc64 for global PMU dump */
++	/* x: May be registered on x86_64 for disabling secure boot */
+ 	NULL,				/* x */
+ 	/* y: May be registered on sparc64 for global register dump */
+ 	NULL,				/* y */
+@@ -515,7 +516,7 @@ static void __sysrq_put_key_op(int key, struct sysrq_key_op *op_p)
+                 sysrq_key_table[i] = op_p;
+ }
+ 
+-void __handle_sysrq(int key, bool check_mask)
++void __handle_sysrq(int key, int from)
+ {
+ 	struct sysrq_key_op *op_p;
+ 	int orig_log_level;
+@@ -535,11 +536,15 @@ void __handle_sysrq(int key, bool check_mask)
+ 
+         op_p = __sysrq_get_key_op(key);
+         if (op_p) {
++		/* Ban synthetic events from some sysrq functionality */
++		if ((from == SYSRQ_FROM_PROC || from == SYSRQ_FROM_SYNTHETIC) &&
++		    op_p->enable_mask & SYSRQ_DISABLE_USERSPACE)
++			printk("This sysrq operation is disabled from userspace.\n");
+ 		/*
+ 		 * Should we check for enabled operations (/proc/sysrq-trigger
+ 		 * should not) and is the invoked operation enabled?
+ 		 */
+-		if (!check_mask || sysrq_on_mask(op_p->enable_mask)) {
++		if (from == SYSRQ_FROM_KERNEL || sysrq_on_mask(op_p->enable_mask)) {
+ 			pr_cont("%s\n", op_p->action_msg);
+ 			console_loglevel = orig_log_level;
+ 			op_p->handler(key);
+@@ -571,7 +576,7 @@ void __handle_sysrq(int key, bool check_mask)
+ void handle_sysrq(int key)
+ {
+ 	if (sysrq_on())
+-		__handle_sysrq(key, true);
++		__handle_sysrq(key, SYSRQ_FROM_KERNEL);
+ }
+ EXPORT_SYMBOL(handle_sysrq);
+ 
+@@ -652,7 +657,7 @@ static void sysrq_do_reset(unsigned long _state)
+ static void sysrq_handle_reset_request(struct sysrq_state *state)
+ {
+ 	if (state->reset_requested)
+-		__handle_sysrq(sysrq_xlate[KEY_B], false);
++		__handle_sysrq(sysrq_xlate[KEY_B], SYSRQ_FROM_KERNEL);
+ 
+ 	if (sysrq_reset_downtime_ms)
+ 		mod_timer(&state->keyreset_timer,
+@@ -803,8 +808,10 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq,
+ 
+ 	default:
+ 		if (sysrq->active && value && value != 2) {
++			int from = sysrq->handle.dev->flags & INPUTDEV_FLAGS_SYNTHETIC ?
++					SYSRQ_FROM_SYNTHETIC : 0;
+ 			sysrq->need_reinject = false;
+-			__handle_sysrq(sysrq_xlate[code], true);
++			__handle_sysrq(sysrq_xlate[code], from);
+ 		}
+ 		break;
+ 	}
+@@ -1084,7 +1091,7 @@ static ssize_t write_sysrq_trigger(struct file *file, const char __user *buf,
+ 
+ 		if (get_user(c, buf))
+ 			return -EFAULT;
+-		__handle_sysrq(c, false);
++		__handle_sysrq(c, SYSRQ_FROM_PROC);
+ 	}
+ 
+ 	return count;
+diff --git a/include/linux/input.h b/include/linux/input.h
+index 82ce323b9986..9e534f228945 100644
+--- a/include/linux/input.h
++++ b/include/linux/input.h
+@@ -42,6 +42,7 @@ struct input_value {
+  * @phys: physical path to the device in the system hierarchy
+  * @uniq: unique identification code for the device (if device has it)
+  * @id: id of the device (struct input_id)
++ * @flags: input device flags (SYNTHETIC, etc.)
+  * @propbit: bitmap of device properties and quirks
+  * @evbit: bitmap of types of events supported by the device (EV_KEY,
+  *	EV_REL, etc.)
+@@ -124,6 +125,8 @@ struct input_dev {
+ 	const char *uniq;
+ 	struct input_id id;
+ 
++	unsigned int flags;
++
+ 	unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];
+ 
+ 	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
+@@ -190,6 +193,8 @@ struct input_dev {
+ };
+ #define to_input_dev(d) container_of(d, struct input_dev, dev)
+ 
++#define	INPUTDEV_FLAGS_SYNTHETIC	0x000000001
++
+ /*
+  * Verify that we are in sync with input_device_id mod_devicetable.h #defines
+  */
+diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
+index 387fa7d05c98..4b07e30b3279 100644
+--- a/include/linux/sysrq.h
++++ b/include/linux/sysrq.h
+@@ -28,6 +28,8 @@
+ #define SYSRQ_ENABLE_BOOT	0x0080
+ #define SYSRQ_ENABLE_RTNICE	0x0100
+ 
++#define SYSRQ_DISABLE_USERSPACE	0x00010000
++
+ struct sysrq_key_op {
+ 	void (*handler)(int);
+ 	char *help_msg;
+@@ -42,8 +44,12 @@ struct sysrq_key_op {
+  * are available -- else NULL's).
+  */
+ 
++#define SYSRQ_FROM_KERNEL	0x0001
++#define SYSRQ_FROM_PROC		0x0002
++#define SYSRQ_FROM_SYNTHETIC	0x0004
++
+ void handle_sysrq(int key);
+-void __handle_sysrq(int key, bool check_mask);
++void __handle_sysrq(int key, int from);
+ int register_sysrq_key(int key, struct sysrq_key_op *op);
+ int unregister_sysrq_key(int key, struct sysrq_key_op *op);
+ struct sysrq_key_op *__sysrq_get_key_op(int key);
+diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
+index 4121345498e0..0ff3cef5df96 100644
+--- a/kernel/debug/kdb/kdb_main.c
++++ b/kernel/debug/kdb/kdb_main.c
+@@ -1968,7 +1968,7 @@ static int kdb_sr(int argc, const char **argv)
+ 		return KDB_ARGCOUNT;
+ 
+ 	kdb_trap_printk++;
+-	__handle_sysrq(*argv[1], check_mask);
++	__handle_sysrq(*argv[1], check_mask & SYSRQ_FROM_KERNEL);
+ 	kdb_trap_printk--;
+ 
+ 	return 0;
+diff --git a/kernel/module.c b/kernel/module.c
+index 2b403ab0ef29..7818c110e95c 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -292,7 +292,7 @@ static void module_assert_mutex_or_preempt(void)
+ #endif
+ }
+ 
+-static bool sig_enforce = IS_ENABLED(CONFIG_MODULE_SIG_FORCE);
++bool sig_enforce = IS_ENABLED(CONFIG_MODULE_SIG_FORCE);
+ #ifndef CONFIG_MODULE_SIG_FORCE
+ module_param(sig_enforce, bool_enable_only, 0644);
+ #endif /* !CONFIG_MODULE_SIG_FORCE */
+-- 
+2.4.3
+

HID-chicony-Add-support-for-Acer-Aspire-Switch-12.patch

@@ -0,0 +1,103 @@
+From 98f07385212073536f303c07ece455acdd4d267f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=D0=9D=D0=B8=D0=BA=D0=BE=D0=BB=D0=B0=D0=B9=20=D0=9A=D1=83?=
+ =?UTF-8?q?=D0=B4=D1=80=D1=8F=D0=B2=D1=86=D0=B5=D0=B2?=
+ <nkudriavtsev@gmail.com>
+Date: Tue, 21 Jul 2015 13:31:52 +0300
+Subject: [PATCH] HID: chicony: Add support for Acer Aspire Switch 12
+
+Acer Aspire Switch 12 keyboard Chicony's controller reports too big usage
+index on the 1st interface. The patch fixes the report. The work based on
+solution from drivers/hid/hid-holtek-mouse.c
+
+Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=101721
+
+Signed-off-by: Nicholas Kudriavtsev <nkudriavtsev@gmail.com>
+Signed-off-by: Jiri Kosina <jkosina@suse.com>
+---
+ drivers/hid/hid-chicony.c | 26 ++++++++++++++++++++++++++
+ drivers/hid/hid-core.c    |  1 +
+ drivers/hid/hid-ids.h     |  1 +
+ 3 files changed, 28 insertions(+)
+
+diff --git a/drivers/hid/hid-chicony.c b/drivers/hid/hid-chicony.c
+index b613d5a79684..bc3cec199fee 100644
+--- a/drivers/hid/hid-chicony.c
++++ b/drivers/hid/hid-chicony.c
+@@ -20,6 +20,7 @@
+ #include <linux/input.h>
+ #include <linux/hid.h>
+ #include <linux/module.h>
++#include <linux/usb.h>
+ 
+ #include "hid-ids.h"
+ 
+@@ -57,10 +58,34 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ 	return 1;
+ }
+ 
++static __u8 *ch_switch12_report_fixup(struct hid_device *hdev, __u8 *rdesc,
++		unsigned int *rsize)
++{
++	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
++	
++	if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
++		/* Change usage maximum and logical maximum from 0x7fff to
++		 * 0x2fff, so they don't exceed HID_MAX_USAGES */
++		switch (hdev->product) {
++		case USB_DEVICE_ID_CHICONY_ACER_SWITCH12:
++			if (*rsize >= 128 && rdesc[64] == 0xff && rdesc[65] == 0x7f
++					&& rdesc[69] == 0xff && rdesc[70] == 0x7f) {
++				hid_info(hdev, "Fixing up report descriptor\n");
++				rdesc[65] = rdesc[70] = 0x2f;
++			}
++			break;
++		}
++
++	}
++	return rdesc;
++}
++
++
+ static const struct hid_device_id ch_devices[] = {
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_ACER_SWITCH12) },
+ 	{ }
+ };
+ MODULE_DEVICE_TABLE(hid, ch_devices);
+@@ -68,6 +93,7 @@ MODULE_DEVICE_TABLE(hid, ch_devices);
+ static struct hid_driver ch_driver = {
+ 	.name = "chicony",
+ 	.id_table = ch_devices,
++	.report_fixup = ch_switch12_report_fixup,
+ 	.input_mapping = ch_input_mapping,
+ };
+ module_hid_driver(ch_driver);
+diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
+index e6fce23b121a..f90ca6574221 100644
+--- a/drivers/hid/hid-core.c
++++ b/drivers/hid/hid-core.c
+@@ -1807,6 +1807,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_ACER_SWITCH12) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
+diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
+index b3b225b75d0a..79210ca8eff1 100644
+--- a/drivers/hid/hid-ids.h
++++ b/drivers/hid/hid-ids.h
+@@ -233,6 +233,7 @@
+ #define USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE	0x1053
+ #define USB_DEVICE_ID_CHICONY_WIRELESS2	0x1123
+ #define USB_DEVICE_ID_CHICONY_AK1D	0x1125
++#define USB_DEVICE_ID_CHICONY_ACER_SWITCH12	0x1421
+ 
+ #define USB_VENDOR_ID_CHUNGHWAT		0x2247
+ #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH	0x0001
+-- 
+2.4.3
+

HID-hid-input-Fix-accessing-freed-memory-during-devi.patch

@@ -0,0 +1,53 @@
+From 0621809e37936e7c2b3eac9165cf2aad7f9189eb Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Date: Mon, 3 Aug 2015 14:57:30 +0900
+Subject: [PATCH] HID: hid-input: Fix accessing freed memory during device
+ disconnect
+
+During unbinding the driver was dereferencing a pointer to memory
+already freed by power_supply_unregister().
+
+Driver was freeing its internal description of battery through pointers
+stored in power_supply structure. However, because the core owns the
+power supply instance, after calling power_supply_unregister() this
+memory is freed and the driver cannot access these members.
+
+Fix this by storing the pointer to internal description of battery in a
+local variable before calling power_supply_unregister(), so the pointer
+remains valid.
+
+Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Reported-by: H.J. Lu <hjl.tools@gmail.com>
+Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core")
+Cc: <stable@vger.kernel.org>
+Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+Signed-off-by: Jiri Kosina <jkosina@suse.com>
+---
+ drivers/hid/hid-input.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
+index 3511bbab..e3c6364 100644
+--- a/drivers/hid/hid-input.c
++++ b/drivers/hid/hid-input.c
+@@ -462,12 +462,15 @@ out:
+ 
+ static void hidinput_cleanup_battery(struct hid_device *dev)
+ {
++	const struct power_supply_desc *psy_desc;
++
+ 	if (!dev->battery)
+ 		return;
+ 
++	psy_desc = dev->battery->desc;
+ 	power_supply_unregister(dev->battery);
+-	kfree(dev->battery->desc->name);
+-	kfree(dev->battery->desc);
++	kfree(psy_desc->name);
++	kfree(psy_desc);
+ 	dev->battery = NULL;
+ }
+ #else  /* !CONFIG_HID_BATTERY_STRENGTH */
+-- 
+2.4.3
+

HID-microsoft-Add-Surface-4-type-cover-pro-4-JP.patch

@@ -0,0 +1,76 @@
+From b490a8537df60d449199e162417da74ee9262515 Mon Sep 17 00:00:00 2001
+From: Yuta Kobayashi <alu.ula@outlook.com>
+Date: Fri, 12 Aug 2016 07:49:17 +0000
+Subject: [PATCH] HID: microsoft: Add Surface 4 type cover pro 4 (JP)
+
+Adding support for the Microsoft Surface 4 Type Cover Pro (JP).
+
+Signed-off-by: Yuta Kobayashi <alu.ula@outlook.com>
+Signed-off-by: Jiri Kosina <jkosina@suse.cz>
+---
+ drivers/hid/hid-core.c          | 2 ++
+ drivers/hid/hid-ids.h           | 1 +
+ drivers/hid/hid-microsoft.c     | 2 ++
+ drivers/hid/usbhid/hid-quirks.c | 1 +
+ 4 files changed, 6 insertions(+)
+
+diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
+index ed10d4f..45400de 100644
+--- a/drivers/hid/hid-core.c
++++ b/drivers/hid/hid-core.c
+@@ -727,6 +727,7 @@ static void hid_scan_collection(struct hid_parser *parser, unsigned type)
+ 	    (hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3 ||
+ 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 ||
+ 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
++	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP ||
+ 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_3 ||
+ 	     hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
+ 	    hid->group == HID_GROUP_MULTITOUCH)
+@@ -1982,6 +1983,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_7K) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) },
+diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
+index da1c58e..3466f0d 100644
+--- a/drivers/hid/hid-ids.h
++++ b/drivers/hid/hid-ids.h
+@@ -713,6 +713,7 @@
+ #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3    0x07dc
+ #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2  0x07e2
+ #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
++#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP 0x07e9
+ #define USB_DEVICE_ID_MS_TYPE_COVER_3    0x07de
+ #define USB_DEVICE_ID_MS_POWER_COVER     0x07da
+
+diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
+index e924d55..56c586f 100644
+--- a/drivers/hid/hid-microsoft.c
++++ b/drivers/hid/hid-microsoft.c
+@@ -288,6 +288,8 @@ static const struct hid_device_id ms_devices[] = {
+ 		.driver_data = MS_HIDINPUT },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP),
+ 		.driver_data = MS_HIDINPUT },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
++		.driver_data = MS_HIDINPUT },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3),
+ 		.driver_data = MS_HIDINPUT },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER),
+diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
+index b4b8c6a..1fccffd 100644
+--- a/drivers/hid/usbhid/hid-quirks.c
++++ b/drivers/hid/usbhid/hid-quirks.c
+@@ -98,6 +98,7 @@ static const struct hid_blacklist {
+ 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3, HID_QUIRK_NO_INIT_REPORTS },
+ 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2, HID_QUIRK_NO_INIT_REPORTS },
+ 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
++	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP, HID_QUIRK_NO_INIT_REPORTS },
+ 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3, HID_QUIRK_NO_INIT_REPORTS },
+ 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
+ 	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
+-- 
+2.7.4
+

HID-wacom-fix-Bamboo-ONE-oops.patch

@@ -0,0 +1,46 @@
+From 580549ef6b3e3fb3b958de490ca99f43a089a2cf Mon Sep 17 00:00:00 2001
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Fri, 25 Mar 2016 15:26:55 +0100
+Subject: [PATCH] HID: wacom: fix Bamboo ONE oops
+
+Looks like recent changes in the Wacom driver made the Bamboo ONE crashes.
+The tablet behaves as if it was a regular Bamboo device with pen, touch
+and pad, but there is no physical pad connected to it.
+The weird part is that the pad is still sending events and given that
+there is no input node connected to it, we get  anull pointer exception.
+
+Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317116
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Acked-by: Ping Cheng <pingc@wacom.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Jiri Kosina <jkosina@suse.cz>
+---
+ drivers/hid/wacom_wac.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
+index bd198bbd4df0..02c4efea241c 100644
+--- a/drivers/hid/wacom_wac.c
++++ b/drivers/hid/wacom_wac.c
+@@ -2426,6 +2426,17 @@ void wacom_setup_device_quirks(struct wacom *wacom)
+ 	}
+ 
+ 	/*
++	 * Hack for the Bamboo One:
++	 * the device presents a PAD/Touch interface as most Bamboos and even
++	 * sends ghosts PAD data on it. However, later, we must disable this
++	 * ghost interface, and we can not detect it unless we set it here
++	 * to WACOM_DEVICETYPE_PAD or WACOM_DEVICETYPE_TOUCH.
++	 */
++	if (features->type == BAMBOO_PEN &&
++	    features->pktlen == WACOM_PKGLEN_BBTOUCH3)
++		features->device_type |= WACOM_DEVICETYPE_PAD;
++
++	/*
+ 	 * Raw Wacom-mode pen and touch events both come from interface
+ 	 * 0, whose HID descriptor has an application usage of 0xFF0D
+ 	 * (i.e., WACOM_VENDORDEFINED_PEN). We route pen packets back
+-- 
+2.5.5
+

Initialize-msg-shm-IPC-objects-before-doing-ipc_addi.patch

@@ -0,0 +1,117 @@
+From b9a532277938798b53178d5a66af6e2915cb27cf Mon Sep 17 00:00:00 2001
+From: Linus Torvalds <torvalds@linux-foundation.org>
+Date: Wed, 30 Sep 2015 12:48:40 -0400
+Subject: [PATCH] Initialize msg/shm IPC objects before doing ipc_addid()
+
+As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before
+having initialized the IPC object state.  Yes, we initialize the IPC
+object in a locked state, but with all the lockless RCU lookup work,
+that IPC object lock no longer means that the state cannot be seen.
+
+We already did this for the IPC semaphore code (see commit e8577d1f0329:
+"ipc/sem.c: fully initialize sem_array before making it visible") but we
+clearly forgot about msg and shm.
+
+Reported-by: Dmitry Vyukov <dvyukov@google.com>
+Cc: Manfred Spraul <manfred@colorfullife.com>
+Cc: Davidlohr Bueso <dbueso@suse.de>
+Cc: stable@vger.kernel.org
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+ ipc/msg.c  | 14 +++++++-------
+ ipc/shm.c  | 13 +++++++------
+ ipc/util.c |  8 ++++----
+ 3 files changed, 18 insertions(+), 17 deletions(-)
+
+diff --git a/ipc/msg.c b/ipc/msg.c
+index 66c4f567eb73..1471db9a7e61 100644
+--- a/ipc/msg.c
++++ b/ipc/msg.c
+@@ -137,13 +137,6 @@ static int newque(struct ipc_namespace *ns, struct ipc_params *params)
+ 		return retval;
+ 	}
+ 
+-	/* ipc_addid() locks msq upon success. */
+-	id = ipc_addid(&msg_ids(ns), &msq->q_perm, ns->msg_ctlmni);
+-	if (id < 0) {
+-		ipc_rcu_putref(msq, msg_rcu_free);
+-		return id;
+-	}
+-
+ 	msq->q_stime = msq->q_rtime = 0;
+ 	msq->q_ctime = get_seconds();
+ 	msq->q_cbytes = msq->q_qnum = 0;
+@@ -153,6 +146,13 @@ static int newque(struct ipc_namespace *ns, struct ipc_params *params)
+ 	INIT_LIST_HEAD(&msq->q_receivers);
+ 	INIT_LIST_HEAD(&msq->q_senders);
+ 
++	/* ipc_addid() locks msq upon success. */
++	id = ipc_addid(&msg_ids(ns), &msq->q_perm, ns->msg_ctlmni);
++	if (id < 0) {
++		ipc_rcu_putref(msq, msg_rcu_free);
++		return id;
++	}
++
+ 	ipc_unlock_object(&msq->q_perm);
+ 	rcu_read_unlock();
+ 
+diff --git a/ipc/shm.c b/ipc/shm.c
+index 222131e8e38f..41787276e141 100644
+--- a/ipc/shm.c
++++ b/ipc/shm.c
+@@ -551,12 +551,6 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
+ 	if (IS_ERR(file))
+ 		goto no_file;
+ 
+-	id = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
+-	if (id < 0) {
+-		error = id;
+-		goto no_id;
+-	}
+-
+ 	shp->shm_cprid = task_tgid_vnr(current);
+ 	shp->shm_lprid = 0;
+ 	shp->shm_atim = shp->shm_dtim = 0;
+@@ -565,6 +559,13 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
+ 	shp->shm_nattch = 0;
+ 	shp->shm_file = file;
+ 	shp->shm_creator = current;
++
++	id = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
++	if (id < 0) {
++		error = id;
++		goto no_id;
++	}
++
+ 	list_add(&shp->shm_clist, &current->sysvshm.shm_clist);
+ 
+ 	/*
+diff --git a/ipc/util.c b/ipc/util.c
+index be4230020a1f..0f401d94b7c6 100644
+--- a/ipc/util.c
++++ b/ipc/util.c
+@@ -237,6 +237,10 @@ int ipc_addid(struct ipc_ids *ids, struct kern_ipc_perm *new, int size)
+ 	rcu_read_lock();
+ 	spin_lock(&new->lock);
+ 
++	current_euid_egid(&euid, &egid);
++	new->cuid = new->uid = euid;
++	new->gid = new->cgid = egid;
++
+ 	id = idr_alloc(&ids->ipcs_idr, new,
+ 		       (next_id < 0) ? 0 : ipcid_to_idx(next_id), 0,
+ 		       GFP_NOWAIT);
+@@ -249,10 +253,6 @@ int ipc_addid(struct ipc_ids *ids, struct kern_ipc_perm *new, int size)
+ 
+ 	ids->in_use++;
+ 
+-	current_euid_egid(&euid, &egid);
+-	new->cuid = new->uid = euid;
+-	new->gid = new->cgid = egid;
+-
+ 	if (next_id < 0) {
+ 		new->seq = ids->seq++;
+ 		if (ids->seq > IPCID_SEQ_MAX)
+-- 
+2.4.3
+

Input-synaptics-pin-3-touches-when-the-firmware-repo.patch

@@ -0,0 +1,47 @@
+From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+Date: Thu, 16 Apr 2015 13:01:46 -0400
+Subject: [PATCH] Input - synaptics: pin 3 touches when the firmware reports 3
+ fingers
+
+Synaptics PS/2 touchpad can send only 2 touches in a report. They can
+detect 4 or 5 and this information is valuable.
+
+In commit 63c4fda (Input: synaptics - allocate 3 slots to keep stability
+in image sensors), we allocate 3 slots, but we still continue to report
+the 2 available fingers. That means that the client sees 2 used slots while
+there is a total of 3 fingers advertised by BTN_TOOL_TRIPLETAP.
+
+For old kernels this is not a problem because max_slots was 2 and libinput/
+xorg-synaptics knew how to deal with that. Now that max_slot is 3, the
+clients ignore BTN_TOOL_TRIPLETAP and count the actual used slots (so 2).
+It then gets confused when receiving the BTN_TOOL_TRIPLETAP and DOUBLETAP
+information, and goes wild.
+
+We can pin the 3 slots until we get a total number of fingers below 2.
+
+Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1212230
+
+Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
+---
+ drivers/input/mouse/synaptics.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
+index 3a32caf06bf1..58102970f94f 100644
+--- a/drivers/input/mouse/synaptics.c
++++ b/drivers/input/mouse/synaptics.c
+@@ -940,6 +940,14 @@ static void synaptics_report_mt_data(struct psmouse *psmouse,
+ 		input_report_abs(dev, ABS_MT_PRESSURE, hw[i]->z);
+ 	}
+ 
++	/* keep (slot count <= num_fingers) by pinning all slots */
++	if (num_fingers >= 3) {
++		for (i = 0; i < 3; i++) {
++			input_mt_slot(dev, i);
++			input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
++		}
++	}
++
+ 	input_mt_drop_unused(dev);
+ 
+ 	/* Don't use active slot count to generate BTN_TOOL events. */

KEYS-Add-a-system-blacklist-keyring.patch

@@ -0,0 +1,102 @@
+From 096da19de900a115ee3610b666ecb7e55926623d Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Fri, 26 Oct 2012 12:36:24 -0400
+Subject: [PATCH 6/9] KEYS: Add a system blacklist keyring
+
+This adds an additional keyring that is used to store certificates that
+are blacklisted.  This keyring is searched first when loading signed modules
+and if the module's certificate is found, it will refuse to load.  This is
+useful in cases where third party certificates are used for module signing.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ certs/system_keyring.c        | 22 ++++++++++++++++++++++
+ include/keys/system_keyring.h |  4 ++++
+ init/Kconfig                  |  9 +++++++++
+ 3 files changed, 35 insertions(+)
+
+diff --git a/certs/system_keyring.c b/certs/system_keyring.c
+index 50979d6dcecd..787eeead2f57 100644
+--- a/certs/system_keyring.c
++++ b/certs/system_keyring.c
+@@ -22,6 +22,9 @@ static struct key *builtin_trusted_keys;
+ #ifdef CONFIG_SECONDARY_TRUSTED_KEYRING
+ static struct key *secondary_trusted_keys;
+ #endif
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++struct key *system_blacklist_keyring;
++#endif
+ 
+ extern __initconst const u8 system_certificate_list[];
+ extern __initconst const unsigned long system_certificate_list_size;
+@@ -99,6 +102,16 @@ static __init int system_trusted_keyring_init(void)
+ 	if (key_link(secondary_trusted_keys, builtin_trusted_keys) < 0)
+ 		panic("Can't link trusted keyrings\n");
+ #endif
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++	system_blacklist_keyring = keyring_alloc(".system_blacklist_keyring",
++			KUIDT_INIT(0), KGIDT_INIT(0), current_cred(),
++			((KEY_POS_ALL & ~KEY_POS_SETATTR) |
++			 KEY_USR_VIEW | KEY_USR_READ | KEY_USR_SEARCH),
++			KEY_ALLOC_NOT_IN_QUOTA,
++			NULL, NULL);
++	if (IS_ERR(system_blacklist_keyring))
++		panic("Can't allocate system blacklist keyring\n");
++#endif
+ 
+ 	return 0;
+ }
+@@ -214,6 +227,15 @@ int verify_pkcs7_signature(const void *data, size_t len,
+ 		trusted_keys = builtin_trusted_keys;
+ #endif
+ 	}
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++	ret = pkcs7_validate_trust(pkcs7, system_blacklist_keyring);
++	if (!ret) {
++		/* module is signed with a cert in the blacklist.  reject */
++		pr_err("Module key is in the blacklist\n");
++		ret = -EKEYREJECTED;
++		goto error;
++	}
++#endif
+ 	ret = pkcs7_validate_trust(pkcs7, trusted_keys);
+ 	if (ret < 0) {
+ 		if (ret == -ENOKEY)
+diff --git a/include/keys/system_keyring.h b/include/keys/system_keyring.h
+index fbd4647767e9..5bc291a3d261 100644
+--- a/include/keys/system_keyring.h
++++ b/include/keys/system_keyring.h
+@@ -33,6 +33,10 @@ extern int restrict_link_by_builtin_and_secondary_trusted(
+ #define restrict_link_by_builtin_and_secondary_trusted restrict_link_by_builtin_trusted
+ #endif
+ 
++#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
++extern struct key *system_blacklist_keyring;
++#endif
++
+ #ifdef CONFIG_IMA_BLACKLIST_KEYRING
+ extern struct key *ima_blacklist_keyring;
+ 
+diff --git a/init/Kconfig b/init/Kconfig
+index a9c4aefd5436..e5449d5aeff9 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1829,6 +1829,15 @@ config SYSTEM_DATA_VERIFICATION
+ 	  module verification, kexec image verification and firmware blob
+ 	  verification.
+ 
++config SYSTEM_BLACKLIST_KEYRING
++	bool "Provide system-wide ring of blacklisted keys"
++	depends on KEYS
++	help
++	  Provide a system keyring to which blacklisted keys can be added.
++	  Keys in the keyring are considered entirely untrusted.  Keys in this
++	  keyring are used by the module signature checking to reject loading
++	  of modules signed with a blacklisted key.
++
+ config PROFILING
+ 	bool "Profiling support"
+ 	help
+-- 
+2.5.5
+

Kbuild-Add-an-option-to-enable-GCC-VTA.patch

@@ -0,0 +1,89 @@
+From: Josh Stone <jistone@redhat.com>
+Date: Fri, 21 Nov 2014 10:40:00 -0800
+Subject: [PATCH] Kbuild: Add an option to enable GCC VTA
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Due to recent codegen issues, gcc -fvar-tracking-assignments was
+unconditionally disabled in commit 2062afb4f804a ("Fix gcc-4.9.0
+miscompilation of load_balance() in scheduler").  However, this reduces
+the debuginfo coverage for variable locations, especially in inline
+functions.  VTA is certainly not perfect either in those cases, but it
+is much better than without.  With compiler versions that have fixed the
+codegen bugs, we would prefer to have the better details for SystemTap,
+and surely other debuginfo consumers like perf will benefit as well.
+
+This patch simply makes CONFIG_DEBUG_INFO_VTA an option.  I considered
+Frank and Linus's discussion of a cc-option-like -fcompare-debug test,
+but I'm convinced that a narrow test of an arch-specific codegen issue
+is not really useful.  GCC has their own regression tests for this, so
+I'd suggest GCC_COMPARE_DEBUG=-fvar-tracking-assignments-toggle is more
+useful for kernel developers to test confidence.
+
+In fact, I ran into a couple more issues when testing for this patch[1],
+although neither of those had any codegen impact.
+ [1] https://bugzilla.redhat.com/show_bug.cgi?id=1140872
+
+With gcc-4.9.2-1.fc22, I can now build v3.18-rc5 with Fedora's i686 and
+x86_64 configs, and this is completely clean with GCC_COMPARE_DEBUG.
+
+Cc: Frank Ch. Eigler <fche@redhat.com>
+Cc: Jakub Jelinek <jakub@redhat.com>
+Cc: Josh Boyer <jwboyer@fedoraproject.org>
+Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Cc: Linus Torvalds <torvalds@linux-foundation.org>
+Cc: Andrew Morton <akpm@linux-foundation.org>
+Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
+Cc: Michel Dänzer <michel@daenzer.net>
+Signed-off-by: Josh Stone <jistone@redhat.com>
+---
+ Makefile          |  4 ++++
+ lib/Kconfig.debug | 18 +++++++++++++++++-
+ 2 files changed, 21 insertions(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 257ef5892ab7..3cc6f4477e78 100644
+--- a/Makefile
++++ b/Makefile
+@@ -701,7 +701,11 @@ KBUILD_CFLAGS	+= -fomit-frame-pointer
+ endif
+ endif
+ 
++ifdef CONFIG_DEBUG_INFO_VTA
++KBUILD_CFLAGS   += $(call cc-option, -fvar-tracking-assignments)
++else
+ KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
++endif
+ 
+ ifdef CONFIG_DEBUG_INFO
+ ifdef CONFIG_DEBUG_INFO_SPLIT
+diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
+index e2894b23efb6..d98afe18f704 100644
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -165,7 +165,23 @@ config DEBUG_INFO_DWARF4
+ 	  Generate dwarf4 debug info. This requires recent versions
+ 	  of gcc and gdb. It makes the debug information larger.
+ 	  But it significantly improves the success of resolving
+-	  variables in gdb on optimized code.
++	  variables in gdb on optimized code.  The gcc docs also
++	  recommend enabling -fvar-tracking-assignments for maximum
++	  benefit. (see DEBUG_INFO_VTA)
++
++config DEBUG_INFO_VTA
++	bool "Enable var-tracking-assignments for debuginfo"
++	depends on DEBUG_INFO
++	help
++	  Enable gcc -fvar-tracking-assignments for improved debug
++	  information on variable locations in optimized code.  Per
++	  gcc, DEBUG_INFO_DWARF4 is recommended for best use of VTA.
++
++	  VTA has been implicated in codegen bugs (gcc PR61801,
++	  PR61904), so this may deserve some caution.  One can set
++	  GCC_COMPARE_DEBUG=-fvar-tracking-assignments-toggle in the
++	  environment to automatically compile everything both ways,
++	  generating an error if anything differs.
+ 
+ config GDB_SCRIPTS
+ 	bool "Provide GDB scripts for kernel debugging"

MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch

@@ -0,0 +1,231 @@
+From ba2b209daf984514229626803472e0b055832345 Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Fri, 26 Oct 2012 12:42:16 -0400
+Subject: [PATCH] MODSIGN: Import certificates from UEFI Secure Boot
+
+Secure Boot stores a list of allowed certificates in the 'db' variable.
+This imports those certificates into the system trusted keyring.  This
+allows for a third party signing certificate to be used in conjunction
+with signed modules.  By importing the public certificate into the 'db'
+variable, a user can allow a module signed with that certificate to
+load.  The shim UEFI bootloader has a similar certificate list stored
+in the 'MokListRT' variable.  We import those as well.
+
+In the opposite case, Secure Boot maintains a list of disallowed
+certificates in the 'dbx' variable.  We load those certificates into
+the newly introduced system blacklist keyring and forbid any module
+signed with those from loading.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ certs/system_keyring.c        | 13 ++++++
+ include/keys/system_keyring.h |  1 +
+ include/linux/efi.h           |  6 +++
+ init/Kconfig                  |  9 ++++
+ kernel/Makefile               |  3 ++
+ kernel/modsign_uefi.c         | 99 +++++++++++++++++++++++++++++++++++++++++++
+ 6 files changed, 131 insertions(+)
+ create mode 100644 kernel/modsign_uefi.c
+
+diff --git a/certs/system_keyring.c b/certs/system_keyring.c
+index 787eeead2f57..4d9123ed5c07 100644
+--- a/certs/system_keyring.c
++++ b/certs/system_keyring.c
+@@ -30,6 +30,19 @@ extern __initconst const u8 system_certificate_list[];
+ extern __initconst const unsigned long system_certificate_list_size;
+ 
+ /**
++ * get_system_keyring - Return a pointer to the system keyring
++ *
++ */
++struct key *get_system_keyring(void)
++{
++	struct key *system_keyring = NULL;
++
++	system_keyring = builtin_trusted_keys;
++	return system_keyring;
++}
++EXPORT_SYMBOL_GPL(get_system_keyring);
++
++/**
+  * restrict_link_to_builtin_trusted - Restrict keyring addition by built in CA
+  *
+  * Restrict the addition of keys into a keyring based on the key-to-be-added
+diff --git a/include/keys/system_keyring.h b/include/keys/system_keyring.h
+index 5bc291a3d261..56ff5715ab67 100644
+--- a/include/keys/system_keyring.h
++++ b/include/keys/system_keyring.h
+@@ -36,6 +36,7 @@ extern int restrict_link_by_builtin_and_secondary_trusted(
+ #ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
+ extern struct key *system_blacklist_keyring;
+ #endif
++extern struct key *get_system_keyring(void);
+ 
+ #ifdef CONFIG_IMA_BLACKLIST_KEYRING
+ extern struct key *ima_blacklist_keyring;
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index ff1877145aa4..2483de19c719 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -658,6 +658,12 @@ typedef struct {
+ 	u64 table;
+ } efi_config_table_64_t;
+ 
++#define EFI_IMAGE_SECURITY_DATABASE_GUID \
++    EFI_GUID(  0xd719b2cb, 0x3d3a, 0x4596, 0xa3, 0xbc, 0xda, 0xd0, 0x0e, 0x67, 0x65, 0x6f )
++
++#define EFI_SHIM_LOCK_GUID \
++    EFI_GUID(  0x605dab50, 0xe046, 0x4300, 0xab, 0xb6, 0x3d, 0xd8, 0x10, 0xdd, 0x8b, 0x23 )
++
+ typedef struct {
+ 	efi_guid_t guid;
+ 	u32 table;
+diff --git a/init/Kconfig b/init/Kconfig
+index e5449d5aeff9..5408c96f6604 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1979,6 +1979,15 @@ config MODULE_SIG_ALL
+ comment "Do not forget to sign required modules with scripts/sign-file"
+ 	depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
+ 
++config MODULE_SIG_UEFI
++	bool "Allow modules signed with certs stored in UEFI"
++	depends on MODULE_SIG && SYSTEM_BLACKLIST_KEYRING && EFI
++	select EFI_SIGNATURE_LIST_PARSER
++	help
++	  This will import certificates stored in UEFI and allow modules
++	  signed with those to be loaded.  It will also disallow loading
++	  of modules stored in the UEFI dbx variable.
++
+ choice
+ 	prompt "Which hash algorithm should modules be signed with?"
+ 	depends on MODULE_SIG
+diff --git a/kernel/Makefile b/kernel/Makefile
+index e2ec54e2b952..8dab549985d8 100644
+--- a/kernel/Makefile
++++ b/kernel/Makefile
+@@ -57,6 +57,7 @@ endif
+ obj-$(CONFIG_UID16) += uid16.o
+ obj-$(CONFIG_MODULES) += module.o
+ obj-$(CONFIG_MODULE_SIG) += module_signing.o
++obj-$(CONFIG_MODULE_SIG_UEFI) += modsign_uefi.o
+ obj-$(CONFIG_KALLSYMS) += kallsyms.o
+ obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
+ obj-$(CONFIG_KEXEC_CORE) += kexec_core.o
+@@ -113,6 +114,8 @@ obj-$(CONFIG_MEMBARRIER) += membarrier.o
+ 
+ obj-$(CONFIG_HAS_IOMEM) += memremap.o
+ 
++$(obj)/modsign_uefi.o: KBUILD_CFLAGS += -fshort-wchar
++
+ $(obj)/configs.o: $(obj)/config_data.h
+ 
+ # config_data.h contains the same information as ikconfig.h but gzipped.
+diff --git a/kernel/modsign_uefi.c b/kernel/modsign_uefi.c
+new file mode 100644
+index 000000000000..fe4a6f2bf10a
+--- /dev/null
++++ b/kernel/modsign_uefi.c
+@@ -0,0 +1,99 @@
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/cred.h>
++#include <linux/err.h>
++#include <linux/efi.h>
++#include <linux/slab.h>
++#include <keys/asymmetric-type.h>
++#include <keys/system_keyring.h>
++#include "module-internal.h"
++
++static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, unsigned long *size)
++{
++	efi_status_t status;
++	unsigned long lsize = 4;
++	unsigned long tmpdb[4];
++	void *db = NULL;
++
++	status = efi.get_variable(name, guid, NULL, &lsize, &tmpdb);
++	if (status != EFI_BUFFER_TOO_SMALL) {
++		pr_err("Couldn't get size: 0x%lx\n", status);
++		return NULL;
++	}
++
++	db = kmalloc(lsize, GFP_KERNEL);
++	if (!db) {
++		pr_err("Couldn't allocate memory for uefi cert list\n");
++		goto out;
++	}
++
++	status = efi.get_variable(name, guid, NULL, &lsize, db);
++	if (status != EFI_SUCCESS) {
++		kfree(db);
++		db = NULL;
++		pr_err("Error reading db var: 0x%lx\n", status);
++	}
++out:
++	*size = lsize;
++	return db;
++}
++
++/*
++ *  * Load the certs contained in the UEFI databases
++ *   */
++static int __init load_uefi_certs(void)
++{
++	efi_guid_t secure_var = EFI_IMAGE_SECURITY_DATABASE_GUID;
++	efi_guid_t mok_var = EFI_SHIM_LOCK_GUID;
++	void *db = NULL, *dbx = NULL, *mok = NULL;
++	unsigned long dbsize = 0, dbxsize = 0, moksize = 0;
++	int rc = 0;
++	struct key *keyring = NULL;
++
++	/* Check if SB is enabled and just return if not */
++	if (!efi_enabled(EFI_SECURE_BOOT))
++		return 0;
++
++	keyring = get_system_keyring();
++	if (!keyring) {
++		pr_err("MODSIGN: Couldn't get system keyring\n");
++		return -EINVAL;
++	}
++
++	/* Get db, MokListRT, and dbx.  They might not exist, so it isn't
++	 * an error if we can't get them.
++	 */
++	db = get_cert_list(L"db", &secure_var, &dbsize);
++	if (!db) {
++		pr_err("MODSIGN: Couldn't get UEFI db list\n");
++	} else {
++		rc = parse_efi_signature_list(db, dbsize, keyring);
++		if (rc)
++			pr_err("Couldn't parse db signatures: %d\n", rc);
++		kfree(db);
++	}
++
++	mok = get_cert_list(L"MokListRT", &mok_var, &moksize);
++	if (!mok) {
++		pr_info("MODSIGN: Couldn't get UEFI MokListRT\n");
++	} else {
++		rc = parse_efi_signature_list(mok, moksize, keyring);
++		if (rc)
++			pr_err("Couldn't parse MokListRT signatures: %d\n", rc);
++		kfree(mok);
++	}
++
++	dbx = get_cert_list(L"dbx", &secure_var, &dbxsize);
++	if (!dbx) {
++		pr_info("MODSIGN: Couldn't get UEFI dbx list\n");
++	} else {
++		rc = parse_efi_signature_list(dbx, dbxsize,
++			system_blacklist_keyring);
++		if (rc)
++			pr_err("Couldn't parse dbx signatures: %d\n", rc);
++		kfree(dbx);
++	}
++
++	return rc;
++}
++late_initcall(load_uefi_certs);
+-- 
+2.5.5
+

MODSIGN-Support-not-importing-certs-from-db.patch

@@ -0,0 +1,86 @@
+From 7ce860189df19a38176c1510f4e5615bf35495c1 Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Thu, 3 Oct 2013 10:14:23 -0400
+Subject: [PATCH 2/2] MODSIGN: Support not importing certs from db
+
+If a user tells shim to not use the certs/hashes in the UEFI db variable
+for verification purposes, shim will set a UEFI variable called MokIgnoreDB.
+Have the uefi import code look for this and not import things from the db
+variable.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ kernel/modsign_uefi.c | 40 +++++++++++++++++++++++++++++++---------
+ 1 file changed, 31 insertions(+), 9 deletions(-)
+
+diff --git a/kernel/modsign_uefi.c b/kernel/modsign_uefi.c
+index 03f601a0052c..321c79a3b282 100644
+--- a/kernel/modsign_uefi.c
++++ b/kernel/modsign_uefi.c
+@@ -8,6 +8,23 @@
+ #include <keys/system_keyring.h>
+ #include "module-internal.h"
+ 
++static __init int check_ignore_db(void)
++{
++	efi_status_t status;
++	unsigned int db = 0;
++	unsigned long size = sizeof(db);
++	efi_guid_t guid = EFI_SHIM_LOCK_GUID;
++
++	/* Check and see if the MokIgnoreDB variable exists.  If that fails
++	 * then we don't ignore DB.  If it succeeds, we do.
++	 */
++	status = efi.get_variable(L"MokIgnoreDB", &guid, NULL, &size, &db);
++	if (status != EFI_SUCCESS)
++		return 0;
++
++	return 1;
++}
++
+ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, unsigned long *size)
+ {
+ 	efi_status_t status;
+@@ -47,7 +64,7 @@ static int __init load_uefi_certs(void)
+ 	efi_guid_t mok_var = EFI_SHIM_LOCK_GUID;
+ 	void *db = NULL, *dbx = NULL, *mok = NULL;
+ 	unsigned long dbsize = 0, dbxsize = 0, moksize = 0;
+-	int rc = 0;
++	int ignore_db, rc = 0;
+ 	struct key *keyring = NULL;
+ 
+ 	/* Check if SB is enabled and just return if not */
+@@ -60,17 +77,22 @@ static int __init load_uefi_certs(void)
+ 		return -EINVAL;
+ 	}
+ 
++	/* See if the user has setup Ignore DB mode */
++	ignore_db = check_ignore_db();
++
+ 	/* Get db, MokListRT, and dbx.  They might not exist, so it isn't
+ 	 * an error if we can't get them.
+ 	 */
+-	db = get_cert_list(L"db", &secure_var, &dbsize);
+-	if (!db) {
+-		pr_err("MODSIGN: Couldn't get UEFI db list\n");
+-	} else {
+-		rc = parse_efi_signature_list(db, dbsize, keyring);
+-		if (rc)
+-			pr_err("Couldn't parse db signatures: %d\n", rc);
+-		kfree(db);
++	if (!ignore_db) {
++		db = get_cert_list(L"db", &secure_var, &dbsize);
++		if (!db) {
++			pr_err("MODSIGN: Couldn't get UEFI db list\n");
++		} else {
++			rc = parse_efi_signature_list(db, dbsize, keyring);
++			if (rc)
++				pr_err("Couldn't parse db signatures: %d\n", rc);
++			kfree(db);
++		}
+ 	}
+ 
+ 	mok = get_cert_list(L"MokListRT", &mok_var, &moksize);
+-- 
+2.5.5
+

Makefile

@@ -0,0 +1,125 @@
+# Makefile for source rpm: kernel
+SPECFILE := kernel.spec
+
+# we only check the .sign signatures
+UPSTREAM_CHECKS = sign
+
+.PHONY: help
+help:
+%:
+	@echo "Try fedpkg $@ or something like that"
+	@exit 1
+
+include Makefile.config
+
+prep:
+	fedpkg -v prep
+
+noarch:
+	fedpkg -v local --arch=noarch
+
+# 'make local' also needs to build the noarch firmware package
+local: noarch
+	fedpkg -v local
+
+extremedebug:
+	@perl -pi -e 's/# CONFIG_DEBUG_PAGEALLOC is not set/CONFIG_DEBUG_PAGEALLOC=y/' config-nodebug
+
+debug:
+	@perl -pi -e 's/# CONFIG_LOCK_STAT is not set/CONFIG_LOCK_STAT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_STACK_USAGE is not set/CONFIG_DEBUG_STACK_USAGE=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SLAB is not set/CONFIG_DEBUG_SLAB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_MUTEXES is not set/CONFIG_DEBUG_MUTEXES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_RT_MUTEXES is not set/CONFIG_DEBUG_RT_MUTEXES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_LOCK_ALLOC is not set/CONFIG_DEBUG_LOCK_ALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_LOCK_TORTURE_TEST is not set/CONFIG_LOCK_TORTURE_TEST=m/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PROVE_LOCKING is not set/CONFIG_PROVE_LOCKING=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PROVE_RCU is not set/CONFIG_PROVE_RCU=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SPINLOCK is not set/CONFIG_DEBUG_SPINLOCK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_VM is not set/CONFIG_DEBUG_VM=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_VM_PGFLAGS is not set/CONFIG_DEBUG_VM_PGFLAGS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION is not set/CONFIG_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAILSLAB is not set/CONFIG_FAILSLAB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_PAGE_ALLOC is not set/CONFIG_FAIL_PAGE_ALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_IO_TIMEOUT is not set/CONFIG_FAIL_IO_TIMEOUT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_MAKE_REQUEST is not set/CONFIG_FAIL_MAKE_REQUEST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_MMC_REQUEST is not set/CONFIG_FAIL_MMC_REQUEST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/CONFIG_FAULT_INJECTION_DEBUG_FS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PI_LIST is not set/CONFIG_DEBUG_PI_LIST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS is not set/CONFIG_DEBUG_OBJECTS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_FREE is not set/CONFIG_DEBUG_OBJECTS_FREE=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/CONFIG_DEBUG_OBJECTS_TIMERS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_WORK is not set/CONFIG_DEBUG_OBJECTS_WORK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_X86_PTDUMP is not set/CONFIG_X86_PTDUMP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_ARM64_PTDUMP is not set/CONFIG_ARM64_PTDUMP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_EFI_PGT_DUMP is not set/CONFIG_EFI_PGT_DUMP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CAN_DEBUG_DEVICES is not set/CONFIG_CAN_DEBUG_DEVICES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_MODULE_FORCE_UNLOAD is not set/CONFIG_MODULE_FORCE_UNLOAD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_NOTIFIERS is not set/CONFIG_DEBUG_NOTIFIERS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMA_API_DEBUG is not set/CONFIG_DMA_API_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic
+	@perl -pi -e 's/# CONFIG_PM_ADVANCED_DEBUG is not set/CONFIG_PM_ADVANCED_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_B43_DEBUG is not set/CONFIG_B43_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_B43LEGACY_DEBUG is not set/CONFIG_B43LEGACY_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_MMIOTRACE is not set/CONFIG_MMIOTRACE=y/' config-nodebug
+	@perl -pi -e 's/CONFIG_STRIP_ASM_SYMS=y/# CONFIG_STRIP_ASM_SYMS is not set/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_CREDENTIALS is not set/CONFIG_DEBUG_CREDENTIALS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_ACPI_DEBUG is not set/CONFIG_ACPI_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_EXT4_DEBUG is not set/CONFIG_EXT4_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/CONFIG_DEBUG_PERF_USE_VMALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_JBD2_DEBUG is not set/CONFIG_JBD2_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_NFSD_FAULT_INJECTION is not set/CONFIG_NFSD_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_BLK_CGROUP is not set/CONFIG_DEBUG_BLK_CGROUP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DRBD_FAULT_INJECTION is not set/CONFIG_DRBD_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_ATH_DEBUG is not set/CONFIG_ATH_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CARL9170_DEBUGFS is not set/CONFIG_CARL9170_DEBUGFS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/CONFIG_IWLWIFI_DEVICE_TRACING=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMADEVICES_DEBUG is not set/CONFIG_DMADEVICES_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMADEVICES_VDEBUG is not set/CONFIG_DMADEVICES_VDEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/CONFIG_CEPH_LIB_PRETTYDEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_QUOTA_DEBUG is not set/CONFIG_QUOTA_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_KGDB_KDB is not set/CONFIG_KGDB_KDB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_KDB_KEYBOARD is not set/CONFIG_KDB_KEYBOARD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PER_CPU_MAPS is not set/CONFIG_DEBUG_PER_CPU_MAPS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_TEST_LIST_SORT is not set/CONFIG_TEST_LIST_SORT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/CONFIG_DEBUG_ATOMIC_SLEEP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DETECT_HUNG_TASK is not set/CONFIG_DETECT_HUNG_TASK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_KMEMLEAK is not set/CONFIG_DEBUG_KMEMLEAK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/' config-nodebug
+
+	@# just in case we're going from extremedebug -> debug
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
+
+	@perl -pi -e 's/# CONFIG_MAXSMP is not set/CONFIG_MAXSMP=y/' config-x86-generic
+
+	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
+	@rpmdev-bumpspec -c "Reenable debugging options." kernel.spec
+
+nodebuginfo:
+	@perl -pi -e 's/^%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 1\}/%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 0\}/' kernel.spec
+nodebug: release
+	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
+release: config-release
+	@perl -pi -e 's/^%define debugbuildsenabled 0/%define debugbuildsenabled 1/' kernel.spec
+	@rpmdev-bumpspec -c "Disable debugging options." kernel.spec
+
+include Makefile.release
+
+unused-kernel-patches:
+	@for f in *.patch; do if [ -e $$f ]; then (egrep -q "^Patch[[:digit:]]+:[[:space:]]+$$f" $(SPECFILE) || echo "Unused:    $$f") && egrep -q "^ApplyPatch[[:space:]]+$$f|^ApplyOptionalPatch[[:space:]]+$$f" $(SPECFILE) || echo "Unapplied: $$f"; fi; done
+
+ifeq ($(MAKECMDGOALS),me a sandwich)
+.PHONY: me a sandwich
+me a:
+	@:
+
+sandwich:
+	@[ `id -u` -ne 0 ] && echo "What? Make it yourself." || echo Okay.
+endif

Makefile.config

@@ -0,0 +1,129 @@
+# Make rules for configuration files.
+#
+# $Id$
+
+CFG		= kernel-$(VERSION)
+
+CONFIGFILES	= \
+	$(CFG)-i686.config $(CFG)-i686-debug.config \
+	$(CFG)-i686-PAE.config $(CFG)-i686-PAEdebug.config \
+	$(CFG)-x86_64.config $(CFG)-x86_64-debug.config \
+	$(CFG)-s390x.config \
+	$(CFG)-armv7hl.config $(CFG)-armv7hl-lpae.config \
+	$(CFG)-aarch64.config \
+	$(CFG)-ppc64.config $(CFG)-ppc64p7.config $(CFG)-ppc64-debug.config \
+	$(CFG)-ppc64le.config $(CFG)-ppc64le-debug.config
+
+PLATFORMS	= x86 x86_64 powerpc s390x arm arm64
+TEMPFILES	= $(addprefix temp-, $(addsuffix -generic, $(PLATFORMS)))
+
+configs: $(CONFIGFILES)
+	@rm -f kernel-*-config
+	@rm -f $(TEMPFILES)
+	@rm -f temp-generic temp-*-generic temp-*-generic-tmp
+
+# Augment the clean target to clean up our own cruft
+clean ::
+	@rm -fv $(CONFIGFILES) $(TEMPFILES) temp-generic kernel-$(VERSION)*config
+
+temp-generic: config-generic config-nodebug
+	cat $^ > temp-generic
+
+temp-debug-generic: config-generic config-debug
+	cat $^ > temp-debug-generic
+
+temp-no-extra-generic: config-no-extra temp-generic
+	perl merge.pl $^ > $@
+
+temp-arm-generic: config-arm-generic temp-no-extra-generic
+	perl merge.pl $^ > $@
+
+temp-armv7-generic: config-armv7-generic temp-arm-generic
+	perl merge.pl $^ > $@
+
+temp-armv7: config-armv7 temp-armv7-generic
+	perl merge.pl $^ > $@
+
+temp-armv7-lpae: config-armv7-lpae temp-armv7-generic
+	perl merge.pl $^ > $@
+
+temp-arm-debug-generic: temp-arm-generic temp-debug-generic
+	perl merge.pl $^ > $@
+
+temp-arm64: config-arm64 temp-arm-generic
+	perl merge.pl $^ > $@
+
+temp-arm64-debug: config-arm64 temp-arm-debug-generic
+	perl merge.pl $^ > $@
+
+temp-x86-32: config-x86-32-generic config-x86-generic
+	perl merge.pl $^  > $@
+
+temp-x86-32-generic: temp-x86-32 temp-generic
+	perl merge.pl $^  > $@
+
+temp-x86-debug-generic: temp-x86-32 temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-x86-64: config-x86_64-generic config-x86-generic
+	perl merge.pl $^  > $@
+
+temp-x86_64-generic: temp-x86-64 temp-generic
+	perl merge.pl $^  > $@
+
+temp-x86_64-debug-generic: temp-x86-64 temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc64-generic: config-powerpc64-generic temp-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc64-debug-generic: config-powerpc64-generic temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-s390-generic: config-s390x temp-generic
+	perl merge.pl $^ > $@
+
+$(CFG)-i686-PAE.config: config-i686-PAE temp-x86-32-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-i686-PAEdebug.config: config-i686-PAE temp-x86-debug-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-i686.config: /dev/null temp-x86-32-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-i686-debug.config: /dev/null temp-x86-debug-generic
+	perl merge.pl $^ i386 > $@
+
+$(CFG)-x86_64.config: /dev/null temp-x86_64-generic
+	perl merge.pl $^ x86_64 > $@
+
+$(CFG)-x86_64-debug.config: /dev/null temp-x86_64-debug-generic
+	perl merge.pl $^ x86_64 > $@
+
+$(CFG)-ppc64.config: config-powerpc64 temp-powerpc64-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-ppc64-debug.config: config-powerpc64 temp-powerpc64-debug-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-ppc64p7.config: config-powerpc64p7 temp-powerpc64-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-ppc64le.config: config-powerpc64le temp-powerpc64-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-ppc64le-debug.config: config-powerpc64le temp-powerpc64-debug-generic
+	perl merge.pl $^ powerpc > $@
+
+$(CFG)-s390x.config: config-s390x temp-s390-generic
+	perl merge.pl $^ s390 > $@
+
+$(CFG)-armv7hl.config: /dev/null temp-armv7
+	perl merge.pl $^ arm > $@
+
+$(CFG)-armv7hl-lpae.config: /dev/null temp-armv7-lpae
+	perl merge.pl $^ arm > $@
+
+$(CFG)-aarch64.config: /dev/null temp-arm64
+	perl merge.pl $^ arm64 > $@

Makefile.release

@@ -0,0 +1,85 @@
+# Make rules for configuration files.
+#
+# $Id$
+
+# This file contains only entries that change the config files.
+# Anything that changes kernel.spec itself should go in the main Makefile.
+
+config-release:
+	@perl -pi -e 's/CONFIG_LOCK_STAT=y/# CONFIG_LOCK_STAT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_STACK_USAGE=y/# CONFIG_DEBUG_STACK_USAGE is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SLAB=y/# CONFIG_DEBUG_SLAB is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_MUTEXES=y/# CONFIG_DEBUG_MUTEXES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_RT_MUTEXES=y/# CONFIG_DEBUG_RT_MUTEXES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_LOCK_ALLOC=y/# CONFIG_DEBUG_LOCK_ALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_LOCK_TORTURE_TEST=m/# CONFIG_LOCK_TORTURE_TEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PROVE_LOCKING=y/# CONFIG_PROVE_LOCKING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PROVE_RCU=y/# CONFIG_PROVE_RCU is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SPINLOCK=y/# CONFIG_DEBUG_SPINLOCK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_VM=y/# CONFIG_DEBUG_VM is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_VM_PGFLAGS=y/# CONFIG_DEBUG_VM_PGFLAGS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION=y/# CONFIG_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAILSLAB=y/# CONFIG_FAILSLAB is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_PAGE_ALLOC=y/# CONFIG_FAIL_PAGE_ALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_IO_TIMEOUT=y/# CONFIG_FAIL_IO_TIMEOUT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_MAKE_REQUEST=y/# CONFIG_FAIL_MAKE_REQUEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_MMC_REQUEST=y/# CONFIG_FAIL_MMC_REQUEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION_DEBUG_FS=y/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PI_LIST=y/# CONFIG_DEBUG_PI_LIST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS=y/# CONFIG_DEBUG_OBJECTS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_FREE=y/# CONFIG_DEBUG_OBJECTS_FREE is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_TIMERS=y/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_WORK=y/# CONFIG_DEBUG_OBJECTS_WORK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_ARM64_PTDUMP=y/# CONFIG_ARM64_PTDUMP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_EFI_PGT_DUMP=y/# CONFIG_EFI_PGT_DUMP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CAN_DEBUG_DEVICES=y/# CONFIG_CAN_DEBUG_DEVICES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_MODULE_FORCE_UNLOAD=y/# CONFIG_MODULE_FORCE_UNLOAD is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_NOTIFIERS=y/# CONFIG_DEBUG_NOTIFIERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMA_API_DEBUG=y/# CONFIG_DMA_API_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PM_TEST_SUSPEND=y/# CONFIG_PM_TEST_SUSPEND is not set/' config-generic
+	@perl -pi -e 's/CONFIG_PM_ADVANCED_DEBUG=y/# CONFIG_PM_ADVANCED_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_B43_DEBUG=y/# CONFIG_B43_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_B43LEGACY_DEBUG=y/# CONFIG_B43LEGACY_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_MMIOTRACE=y/# CONFIG_MMIOTRACE is not set/' config-nodebug
+	@perl -pi -e 's/# CONFIG_STRIP_ASM_SYMS is not set/CONFIG_STRIP_ASM_SYMS=y/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_CREDENTIALS=y/# CONFIG_DEBUG_CREDENTIALS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_ACPI_DEBUG=y/# CONFIG_ACPI_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_EXT4_DEBUG=y/# CONFIG_EXT4_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PERF_USE_VMALLOC=y/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_JBD2_DEBUG=y/# CONFIG_JBD2_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_NFSD_FAULT_INJECTION=y/# CONFIG_NFSD_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_BLK_CGROUP=y/# CONFIG_DEBUG_BLK_CGROUP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DRBD_FAULT_INJECTION=y/# CONFIG_DRBD_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_ATH_DEBUG=y/# CONFIG_ATH_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CARL9170_DEBUGFS=y/# CONFIG_CARL9170_DEBUGFS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_IWLWIFI_DEVICE_TRACING=y/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMADEVICES_DEBUG=y/# CONFIG_DMADEVICES_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMADEVICES_VDEBUG=y/# CONFIG_DMADEVICES_VDEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CEPH_LIB_PRETTYDEBUG=y/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_QUOTA_DEBUG=y/# CONFIG_QUOTA_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PER_CPU_MAPS=y/# CONFIG_DEBUG_PER_CPU_MAPS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PERCPU_TEST=m/# CONFIG_PERCPU_TEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_TEST_LIST_SORT=y/# CONFIG_TEST_LIST_SORT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_TEST_STRING_HELPERS=m/# CONFIG_TEST_STRING_HELPERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_ATOMIC_SLEEP=y/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DETECT_HUNG_TASK=y/# CONFIG_DETECT_HUNG_TASK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_KMEMLEAK=y/# CONFIG_DEBUG_KMEMLEAK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_MAC80211_MESSAGE_TRACING=y/# CONFIG_MAC80211_MESSAGE_TRACING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_XFS_WARN=y/# CONFIG_XFS_WARN is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_EDAC_DEBUG=y/# CONFIG_EDAC_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_RTLWIFI_DEBUG=y/# CONFIG_RTLWIFI_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/' config-nodebug
+
+	@# Undo anything that make extremedebug might have set
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-debug
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
+
+	@# Change defaults back to sane things.
+	@perl -pi -e 's/CONFIG_MAXSMP=y/# CONFIG_MAXSMP is not set/' config-x86-generic

Makefile.rhelver

@@ -1,45 +0,0 @@
-RHEL_MAJOR = 8
-RHEL_MINOR = 99
-
-#
-# RHEL_RELEASE
-# -------------
-#
-# Represents build number in 'release' part of RPM's name-version-release.
-#   name is <package_name>, e.g. kernel
-#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
-#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-RHEL_RELEASE = 122
-
-#
-# Early y+1 numbering
-# --------------------
-#
-# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
-# First is RHEL_RELEASE inherited/merged from y as-is, second number
-# is incremented with each build starting from 1. After merge from y,
-# it resets back to 1. This way y+1 nvr reflects status of last merge.
-#
-# Example:
-#
-# rhel8.0                        rhel-8.1
-#   kernel-4.18.0-58.el8   -->     kernel-4.18.0-58.1.el8
-#                                  kernel-4.18.0-58.2.el8
-#   kernel-4.18.0-59.el8           kernel-4.18.0-59.1.el8
-#   kernel-4.18.0-60.el8
-#   kernel-4.18.0-61.el8   -->     kernel-4.18.0-61.1.el8
-#
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-EARLY_YSTREAM ?= no
-EARLY_YBUILD:=
-EARLY_YRELEASE:=
-ifneq ("$(ZSTREAM)", "yes")
-  ifeq ("$(EARLY_YSTREAM)","yes")
-    RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
-  endif
-endif

PCI-Lock-down-BAR-access-when-module-security-is-ena.patch

@@ -0,0 +1,117 @@
+From 6f756b32a45b022428e33ce20181e874c73ca82e Mon Sep 17 00:00:00 2001
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Thu, 8 Mar 2012 10:10:38 -0500
+Subject: [PATCH] PCI: Lock down BAR access when module security is enabled
+
+Any hardware that can potentially generate DMA has to be locked down from
+userspace in order to avoid it being possible for an attacker to modify
+kernel code, allowing them to circumvent disabled module loading or module
+signing. Default to paranoid - in future we can potentially relax this for
+sufficiently IOMMU-isolated devices.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/pci/pci-sysfs.c | 10 ++++++++++
+ drivers/pci/proc.c      |  8 +++++++-
+ drivers/pci/syscall.c   |  3 ++-
+ 3 files changed, 19 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
+index bcd10c7..a950301 100644
+--- a/drivers/pci/pci-sysfs.c
++++ b/drivers/pci/pci-sysfs.c
+@@ -30,6 +30,7 @@
+ #include <linux/vgaarb.h>
+ #include <linux/pm_runtime.h>
+ #include <linux/of.h>
++#include <linux/module.h>
+ #include "pci.h"
+ 
+ static int sysfs_initialized;	/* = 0 */
+@@ -716,6 +717,9 @@ static ssize_t pci_write_config(struct file *filp, struct kobject *kobj,
+ 	loff_t init_off = off;
+ 	u8 *data = (u8 *) buf;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (off > dev->cfg_size)
+ 		return 0;
+ 	if (off + count > dev->cfg_size) {
+@@ -1007,6 +1011,9 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
+ 	resource_size_t start, end;
+ 	int i;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ 		if (res == &pdev->resource[i])
+ 			break;
+@@ -1106,6 +1113,9 @@ static ssize_t pci_write_resource_io(struct file *filp, struct kobject *kobj,
+ 				     struct bin_attribute *attr, char *buf,
+ 				     loff_t off, size_t count)
+ {
++	if (secure_modules())
++		return -EPERM;
++
+ 	return pci_resource_io(filp, kobj, attr, buf, off, count, true);
+ }
+ 
+diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
+index 2408abe..59f321c 100644
+--- a/drivers/pci/proc.c
++++ b/drivers/pci/proc.c
+@@ -116,6 +116,9 @@ static ssize_t proc_bus_pci_write(struct file *file, const char __user *buf,
+ 	int size = dev->cfg_size;
+ 	int cnt;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (pos >= size)
+ 		return 0;
+ 	if (nbytes >= size)
+@@ -195,6 +198,9 @@ static long proc_bus_pci_ioctl(struct file *file, unsigned int cmd,
+ #endif /* HAVE_PCI_MMAP */
+ 	int ret = 0;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	switch (cmd) {
+ 	case PCIIOC_CONTROLLER:
+ 		ret = pci_domain_nr(dev->bus);
+@@ -233,7 +239,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
+ 	struct pci_filp_private *fpriv = file->private_data;
+ 	int i, ret, write_combine;
+ 
+-	if (!capable(CAP_SYS_RAWIO))
++	if (!capable(CAP_SYS_RAWIO) || secure_modules())
+ 		return -EPERM;
+ 
+ 	/* Make sure the caller is mapping a real resource for this device */
+diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
+index b91c4da..98f5637 100644
+--- a/drivers/pci/syscall.c
++++ b/drivers/pci/syscall.c
+@@ -10,6 +10,7 @@
+ #include <linux/errno.h>
+ #include <linux/pci.h>
+ #include <linux/syscalls.h>
++#include <linux/module.h>
+ #include <asm/uaccess.h>
+ #include "pci.h"
+ 
+@@ -92,7 +93,7 @@ SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
+ 	u32 dword;
+ 	int err = 0;
+ 
+-	if (!capable(CAP_SYS_ADMIN))
++	if (!capable(CAP_SYS_ADMIN) || secure_modules())
+ 		return -EPERM;
+ 
+ 	dev = pci_get_bus_and_slot(bus, dfn);
+-- 
+2.9.2
+

PatchList.txt

@@ -0,0 +1,52 @@
+**** Backports and patches headed/already upsteram *****************************
+
+* cpupower-Fix-segfault-due-to-incorrect-getopt_long-a.patch (rhbz 1000439)
+  - Queued for next upstream release I believe.  Fixes a segfault in cpupower
+
+* dm-cache-policy-mq_fix-large-scale-table-allocation-bug.patch (rhbz 993744)
+  - Still pending upstream
+
+* ath9k_rx_dma_stop_check.patch (rhbz 892811)
+  - Fixes some DMA issue on specific hardware.  Taken from
+https://dev.openwrt.org/browser/trunk/package/mac80211/patches/552-ath9k_rx_dma_stop_check.patch?rev=34910
+
+* secure-modules.patch
+* modsign-uefi.patch
+* sb-hibernate.patch
+* sysrq-secure-boot.patch
+  - Fedora secure boot support.
+  - Dear Matthew, this is your fault.  Run sed already and get a new set out.
+
+**** Other stuff that should go upstream (in decreasing likelyhood) ************
+
+* defaults-acpi-video.patch
+* disable-i8042-check-on-apple-mac.patch
+* no-pcspkr-modalias.patch
+* die-floppy-die.patch
+	Fedora policy decisions
+	Turn into CONFIG_ options and upstream ?
+
+* input-kill-stupid-messages.patch
+* silence-fbcon-logo.patch
+* silence-noise.patch
+	Fedora local 'hush' patches.  (TODO: push more upstream)
+
+* makefile-after_link.patch
+  Rolandware that is used by the debuginfo generation.
+  Possibly upstreamable ?
+
+* serial-460800.patch
+	Probably not upstreamable.
+	http://marc.theaimsgroup.com/?l=linux-kernel&m=112687270832687&w=2
+	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=126403
+	http://lkml.org/lkml/2006/8/2/208
+
+********************************************************************************
+
+'MUSTARD' patches.  Fedora local patches that are very unlikely to go upstream.
+
+* crash-driver.patch
+	Unlikely to go upstream.
+	https://bugzilla.redhat.com/show_bug.cgi?id=492803
+
+********************************************************************************

Patchlist.changelog

@@ -1,228 +0,0 @@
-https://gitlab.com/cki-project/kernel-ark/-/commit/8773e8c6039ff74d1426cc80de30de759cd0c2a2
- 8773e8c6039ff74d1426cc80de30de759cd0c2a2 irq: export irq_check_status_bit
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e187313e5f0086538fefe0925ef84480f99616d8
- e187313e5f0086538fefe0925ef84480f99616d8 gcc-plugins: fix gcc 11 indigestion with plugins...
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc
- 0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc Fix up bad merge with efi: generalize efi_get_secureboot
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/364788093bdf437c33753d327136c363be8f756c
- 364788093bdf437c33753d327136c363be8f756c Fix up a merge issue with rxe.c
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a4d554ce883e24df77cce42bc2deec527028c213
- a4d554ce883e24df77cce42bc2deec527028c213 Filter out LTO build options from the perl ccopts
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/17b0f7f1d49df30661b517d668715ff5ee1bab09
- 17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e7c009cd91ababdbb5f726ef592c7800f0682d3a
- e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7120b2a26fc4c7954fd0395973dc6739c110e091
- 7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7a28e2fde653a161913abb8eee943cdacb5ff2ae
- 7a28e2fde653a161913abb8eee943cdacb5ff2ae x86: Fix compile issues with rh_check_supported()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/45f64c1a24e73af7987cffec3ea941e29364f87f
- 45f64c1a24e73af7987cffec3ea941e29364f87f e1000e: bump up timeout to wait when ME un-configure ULP mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6c14763b1ce98698949ff45135c15e333aa6416d
- 6c14763b1ce98698949ff45135c15e333aa6416d drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/67a19b16012b12cffba0b515c6503e5f8cdbb798
- 67a19b16012b12cffba0b515c6503e5f8cdbb798 drm: panel: add Xingbangda XBD599 panel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d220dbf98cef820367b5a2a2eeaacebee958bdd4
- d220dbf98cef820367b5a2a2eeaacebee958bdd4 dt-bindings: panel: add binding for Xingbangda XBD599 panel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/80660062260dec4bdca9540922577542c16145e8
- 80660062260dec4bdca9540922577542c16145e8 ARM: fix __get_user_check() in case uaccess_* calls are not inlined
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/24d8743613b2a6a585fc68cfe95078d9a3d5b389
- 24d8743613b2a6a585fc68cfe95078d9a3d5b389 mm/kmemleak: skip late_init if not skip disable
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b697ff5e26974fee8fcd31a1e221e9dd41515efc
- b697ff5e26974fee8fcd31a1e221e9dd41515efc KEYS: Make use of platform keyring for module signature verify
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/081d2185e22479b449586c4e9843602ca0d49806
- 081d2185e22479b449586c4e9843602ca0d49806 Drop that for now
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5ef51389cf6673a0e9e004909c7be1dc785050b2
- 5ef51389cf6673a0e9e004909c7be1dc785050b2 Input: rmi4 - remove the need for artificial IRQ in case of HID
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c1788012ebf8de46e9dc80d18051ed0c77c811b6
- c1788012ebf8de46e9dc80d18051ed0c77c811b6 ARM: tegra: usb no reset
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/577365feaa909db4c0949eabfcda7e4a972b8e54
- 577365feaa909db4c0949eabfcda7e4a972b8e54 arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/331be9c5a436057ee852075c102d9d90a9046a30
- 331be9c5a436057ee852075c102d9d90a9046a30 redhat: rh_kabi: deduplication friendly structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/34d79fbfb327f732ebf3ece4db21a14f81fedf03
- 34d79fbfb327f732ebf3ece4db21a14f81fedf03 redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07
- 93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07 redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/8e5c06356457f5351289e9f687b991189d163dae
- 8e5c06356457f5351289e9f687b991189d163dae redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/212cbccda77cc81fcb60123907eabdac8ad5adb7
- 212cbccda77cc81fcb60123907eabdac8ad5adb7 redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6f7744b412e1fb86a67d8761e64df69cf891b4ad
- 6f7744b412e1fb86a67d8761e64df69cf891b4ad redhat: rh_kabi: Add macros to size and extend structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/049623d33998be30d79692c69b34acb502c496e3
- 049623d33998be30d79692c69b34acb502c496e3 Removing Obsolete hba pci-ids from rhel8
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/43ef1d631ecfe84084db3572c9ed1bedbdceb0f8
- 43ef1d631ecfe84084db3572c9ed1bedbdceb0f8 mptsas: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e5726695109dd1a73da92487b75de6a51d54c015
- e5726695109dd1a73da92487b75de6a51d54c015 mptsas: Taint kernel if mptsas is loaded
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16
- ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16 mptspi: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/bd305f716d8b64be1926bc7aebe02468ac6bf599
- bd305f716d8b64be1926bc7aebe02468ac6bf599 qla2xxx: Remove PCI IDs of deprecated adapter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/803ff9a2c660c094e14d246ef05019bf6008d503
- 803ff9a2c660c094e14d246ef05019bf6008d503 be2iscsi: remove unsupported device IDs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2cb24399321f555f18b0804d3fe02cf53949fba1
- 2cb24399321f555f18b0804d3fe02cf53949fba1 mptspi: Taint kernel if mptspi is loaded
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ad1740551ff4af49f1ef10a130783d9369e955a0
- ad1740551ff4af49f1ef10a130783d9369e955a0 hpsa: remove old cciss-based smartarray pci ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4197ba3e766656eea9175c11ed05903620d98a28
- 4197ba3e766656eea9175c11ed05903620d98a28 qla4xxx: Remove deprecated PCI IDs from RHEL 8
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7e285aec22ab1213639afda877902db363473cb0
- 7e285aec22ab1213639afda877902db363473cb0 aacraid: Remove depreciated device and vendor PCI id's
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/846109a16be92155e69731c36dde48761d375153
- 846109a16be92155e69731c36dde48761d375153 megaraid_sas: remove deprecated pci-ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6fd2019d01cee7ff36dc047d3ecdb504b968f222
- 6fd2019d01cee7ff36dc047d3ecdb504b968f222 mpt*: remove certain deprecated pci-ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/dddcd5c1129b275ff160324036a662739db51fc3
- dddcd5c1129b275ff160324036a662739db51fc3 kernel: add SUPPORT_REMOVED kernel taint
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/08d77161dba915d1ed0d9fede658085440ab4474
- 08d77161dba915d1ed0d9fede658085440ab4474 Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e2dc2ca6a25a445bf22ceb6a8e38e02706605341
- e2dc2ca6a25a445bf22ceb6a8e38e02706605341 Add option of 13 for FORCE_MAX_ZONEORDER
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2384646bf71d8c282cf49bb20321fdf802c61cce
- 2384646bf71d8c282cf49bb20321fdf802c61cce s390: Lock down the kernel when the IPL secure flag is set
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5850c93175b9d2e1081873f4bbe08dead202cb08
- 5850c93175b9d2e1081873f4bbe08dead202cb08 efi: Lock down the kernel if booted in secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/53250b991f841be025fa4d264850dadc0fae2861
- 53250b991f841be025fa4d264850dadc0fae2861 efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/72223fd1241cc5c70b96a491db14d54c83beadd8
- 72223fd1241cc5c70b96a491db14d54c83beadd8 security: lockdown: expose a hook to lock the kernel down
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7ba28f03674fa9346610c3fea7fc93bc58f06d2a
- 7ba28f03674fa9346610c3fea7fc93bc58f06d2a Make get_cert_list() use efi_status_to_str() to print error messages.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2ae9082db0b54d831a9b3782c049d9917e37d89f
- 2ae9082db0b54d831a9b3782c049d9917e37d89f Add efi_status_to_str() and rework efi_status_to_err().
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cee1461ada1b7e4b92cd154e7ec241119afcd644
- cee1461ada1b7e4b92cd154e7ec241119afcd644 Add support for deprecating processors
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2420149f8f5fa9dd1e2dc793765b498022922a81
- 2420149f8f5fa9dd1e2dc793765b498022922a81 arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/1d69b30b98b60aff639351f5788d20a3b17f6e27
- 1d69b30b98b60aff639351f5788d20a3b17f6e27 iommu/arm-smmu: workaround DMA mode issues
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6b2e73e508e7a117b1db91596097c00e5570f64a
- 6b2e73e508e7a117b1db91596097c00e5570f64a rh_kabi: introduce RH_KABI_EXCLUDE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ecb9206bce179eb600c52642a6753012a69ce4a2
- ecb9206bce179eb600c52642a6753012a69ce4a2 ipmi: do not configure ipmi for HPE m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/473be59fe72afa9969cf8d10609ef3f14f594631
- 473be59fe72afa9969cf8d10609ef3f14f594631 IB/rxe: Mark Soft-RoCE Transport driver as tech-preview
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b94117795261f9c074a7addca2252238871b5081
- b94117795261f9c074a7addca2252238871b5081 scsi: smartpqi: add inspur advantech ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cae871558c333880c1687cab6f2a71accf40d105
- cae871558c333880c1687cab6f2a71accf40d105 ice: mark driver as tech-preview
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7d9cb007404211ea6638bde4a28dd0fbe8d95de0
- 7d9cb007404211ea6638bde4a28dd0fbe8d95de0 kABI: Add generic kABI macros to use for kABI workarounds
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/bd353e9aae8877dd490e6c92b67849e0dcfbab25
- bd353e9aae8877dd490e6c92b67849e0dcfbab25 add pci_hw_vendor_status()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/41a259999969bbdfe9f556ce71f2c3c07d7454f4
- 41a259999969bbdfe9f556ce71f2c3c07d7454f4 ahci: thunderx2: Fix for errata that affects stop engine
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2a107343529ce648c11bff62e9f72bbeec738f3f
- 2a107343529ce648c11bff62e9f72bbeec738f3f Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/03e48a48f400a51a182a1254cf22ff0c08706d76
- 03e48a48f400a51a182a1254cf22ff0c08706d76 bpf: Add tech preview taint for syscall
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/607f0e89af7ef5682f79f2eea0a99638a1bc0c4f
- 607f0e89af7ef5682f79f2eea0a99638a1bc0c4f bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/31da227877eb734ddb484bc519aae85ce200802e
- 31da227877eb734ddb484bc519aae85ce200802e add Red Hat-specific taint flags
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7a2e2c83be0230667756cccb5bc3687419dfbb8b
- 7a2e2c83be0230667756cccb5bc3687419dfbb8b kdump: fix a grammar issue in a kernel message
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d345d54d33e7d496c9d845e4723550dd37cb3f88
- d345d54d33e7d496c9d845e4723550dd37cb3f88 tags.sh: Ignore redhat/rpm
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0
- 5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0 put RHEL info into generated headers
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ce12884c009ec3bed11100c9d19f6d97628cf8ae
- ce12884c009ec3bed11100c9d19f6d97628cf8ae kdump: add support for crashkernel=auto
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/18fb1389afccdc5535977a10669b49a37829b55a
- 18fb1389afccdc5535977a10669b49a37829b55a kdump: round up the total memory size to 128M for crashkernel reservation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5fb9821441cc0b77101ad9c0dfaa747957a4cce4
- 5fb9821441cc0b77101ad9c0dfaa747957a4cce4 acpi: prefer booting with ACPI over DTS
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0cf21a40db6fca5d89cf3d65808117c8c14e524e
- 0cf21a40db6fca5d89cf3d65808117c8c14e524e aarch64: acpi scan: Fix regression related to X-Gene UARTs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/de13e14cc2388478d9a2c68c5d90affd92098f11
- de13e14cc2388478d9a2c68c5d90affd92098f11 ACPI / irq: Workaround firmware issue on X-Gene based m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/71c098f4afa38a15a95495c14f71fb087ab27308
- 71c098f4afa38a15a95495c14f71fb087ab27308 modules: add rhelversion MODULE_INFO tag
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/3247f9c838f4aa91aa5d08c152b385d61554d4b5
- 3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e80982feaa68226ff60d2f83dace2016c35270d3
- e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2987f9a606df106f5bdfa4113eb55356a21085a6
- 2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a99885a5e77af594dfdce586cc83e5911d8401ce
- a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cd3a5d30570279538623ea8a1255db0ee4b728f7
- cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile
-

RDS-verify-the-underlying-transport-exists-before-cr.patch

@@ -0,0 +1,79 @@
+From 74e98eb085889b0d2d4908f59f6e00026063014f Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sasha.levin@oracle.com>
+Date: Tue, 8 Sep 2015 10:53:40 -0400
+Subject: [PATCH] RDS: verify the underlying transport exists before creating a
+ connection
+
+There was no verification that an underlying transport exists when creating
+a connection, this would cause dereferencing a NULL ptr.
+
+It might happen on sockets that weren't properly bound before attempting to
+send a message, which will cause a NULL ptr deref:
+
+[135546.047719] kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
+[135546.051270] Modules linked in:
+[135546.051781] CPU: 4 PID: 15650 Comm: trinity-c4 Not tainted 4.2.0-next-20150902-sasha-00041-gbaa1222-dirty #2527
+[135546.053217] task: ffff8800835bc000 ti: ffff8800bc708000 task.ti: ffff8800bc708000
+[135546.054291] RIP: __rds_conn_create (net/rds/connection.c:194)
+[135546.055666] RSP: 0018:ffff8800bc70fab0  EFLAGS: 00010202
+[135546.056457] RAX: dffffc0000000000 RBX: 0000000000000f2c RCX: ffff8800835bc000
+[135546.057494] RDX: 0000000000000007 RSI: ffff8800835bccd8 RDI: 0000000000000038
+[135546.058530] RBP: ffff8800bc70fb18 R08: 0000000000000001 R09: 0000000000000000
+[135546.059556] R10: ffffed014d7a3a23 R11: ffffed014d7a3a21 R12: 0000000000000000
+[135546.060614] R13: 0000000000000001 R14: ffff8801ec3d0000 R15: 0000000000000000
+[135546.061668] FS:  00007faad4ffb700(0000) GS:ffff880252000000(0000) knlGS:0000000000000000
+[135546.062836] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
+[135546.063682] CR2: 000000000000846a CR3: 000000009d137000 CR4: 00000000000006a0
+[135546.064723] Stack:
+[135546.065048]  ffffffffafe2055c ffffffffafe23fc1 ffffed00493097bf ffff8801ec3d0008
+[135546.066247]  0000000000000000 00000000000000d0 0000000000000000 ac194a24c0586342
+[135546.067438]  1ffff100178e1f78 ffff880320581b00 ffff8800bc70fdd0 ffff880320581b00
+[135546.068629] Call Trace:
+[135546.069028] ? __rds_conn_create (include/linux/rcupdate.h:856 net/rds/connection.c:134)
+[135546.069989] ? rds_message_copy_from_user (net/rds/message.c:298)
+[135546.071021] rds_conn_create_outgoing (net/rds/connection.c:278)
+[135546.071981] rds_sendmsg (net/rds/send.c:1058)
+[135546.072858] ? perf_trace_lock (include/trace/events/lock.h:38)
+[135546.073744] ? lockdep_init (kernel/locking/lockdep.c:3298)
+[135546.074577] ? rds_send_drop_to (net/rds/send.c:976)
+[135546.075508] ? __might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3795)
+[135546.076349] ? __might_fault (mm/memory.c:3795)
+[135546.077179] ? rds_send_drop_to (net/rds/send.c:976)
+[135546.078114] sock_sendmsg (net/socket.c:611 net/socket.c:620)
+[135546.078856] SYSC_sendto (net/socket.c:1657)
+[135546.079596] ? SYSC_connect (net/socket.c:1628)
+[135546.080510] ? trace_dump_stack (kernel/trace/trace.c:1926)
+[135546.081397] ? ring_buffer_unlock_commit (kernel/trace/ring_buffer.c:2479 kernel/trace/ring_buffer.c:2558 kernel/trace/ring_buffer.c:2674)
+[135546.082390] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749)
+[135546.083410] ? trace_event_raw_event_sys_enter (include/trace/events/syscalls.h:16)
+[135546.084481] ? do_audit_syscall_entry (include/trace/events/syscalls.h:16)
+[135546.085438] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749)
+[135546.085515] rds_ib_laddr_check(): addr 36.74.25.172 ret -99 node type -1
+
+Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
+Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ net/rds/connection.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/net/rds/connection.c b/net/rds/connection.c
+index 9b2de5e67d79..49adeef8090c 100644
+--- a/net/rds/connection.c
++++ b/net/rds/connection.c
+@@ -190,6 +190,12 @@ new_conn:
+ 		}
+ 	}
+ 
++	if (trans == NULL) {
++		kmem_cache_free(rds_conn_slab, conn);
++		conn = ERR_PTR(-ENODEV);
++		goto out;
++	}
++
+ 	conn->c_trans = trans;
+ 
+ 	ret = trans->conn_alloc(conn, gfp);
+-- 
+2.4.3
+

README.rst

@@ -1,25 +0,0 @@
-===================
-The Kernel dist-git
-===================
-
-The kernel is maintained in a `source tree`_ rather than directly in dist-git.
-The specfile is maintained as a `template`_ in the source tree along with a set
-of build scripts to generate configurations, (S)RPMs, and to populate the
-dist-git repository.
-
-The `documentation`_ for the source tree covers how to contribute and maintain
-the tree.
-
-If you're looking for the downstream patch set it's available in the source
-tree with "git log master..ark-patches" or
-`online`_.
-
-Each release in dist-git is tagged in the source repository so you can easily
-check out the source tree for a build. The tags are in the format
-name-version-release, but note release doesn't contain the dist tag since the
-source can be built in different build roots (Fedora, CentOS, etc.)
-
-.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
-.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
-.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
-.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

README.txt

@@ -0,0 +1,82 @@
+
+		Kernel package tips & tricks.
+		~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The kernel is one of the more complicated packages in the distro, and
+for the newcomer, some of the voodoo in the spec file can be somewhat scary.
+This file attempts to document some of the magic.
+
+
+Speeding up make prep
+---------------------
+The kernel is nearly 500MB of source code, and as such, 'make prep'
+takes a while. The spec file employs some trickery so that repeated
+invocations of make prep don't take as long.  Ordinarily the %prep
+phase of a package will delete the tree it is about to untar/patch.
+The kernel %prep keeps around an unpatched version of the tree,
+and makes a symlink tree clone of that clean tree and than applies
+the patches listed in the spec to the symlink tree.
+This makes a huge difference if you're doing multiple make preps a day.
+As an added bonus, doing a diff between the clean tree and the symlink
+tree is slightly faster than it would be doing two proper copies of the tree.
+
+
+build logs.
+-----------
+There's a convenience helper script in scripts/grab-logs.sh
+that will grab the build logs from koji for the kernel version reported
+by make verrel
+
+
+config heirarchy.
+-----------------
+Instead of having to maintain a config file for every arch variant we build on,
+the kernel spec uses a nested system of configs.  At the top level, is
+config-generic. Add options here that should be present in every possible
+config on all architectures.
+
+Beneath this are per-arch overrides. For example config-x86-generic add
+additional x86 specific options, and also _override_ any options that were
+set in config-generic.
+
+The heirarchy looks like this..
+
+                           config-generic
+                                 |
+                         config-x86-generic
+                         |                |
+             config-x86-32-generic   config-x86-64-generic
+
+An option set in a lower level will override the same option set in one
+of the higher levels.
+
+
+There exist two additional overrides, config-debug, and config-nodebug,
+which override -generic, and the per-arch overrides. It is documented
+further below.
+
+
+debug options.
+--------------
+This is a little complicated, as the purpose & meaning of this changes
+depending on where we are in the release cycle.
+If we are building for a current stable release, 'make release' has
+typically been run already, which sets up the following..
+- Two builds occur, a 'kernel' and a 'kernel-debug' flavor.
+- kernel-debug will get various heavyweight debugging options like
+  lockdep etc turned on.
+
+If we are building for rawhide, 'make debug' has been run, which changes
+the status quo to:
+- We only build one kernel 'kernel'
+- The debug options from 'config-debug' are always turned on.
+This is done to increase coverage testing, as not many people actually
+run kernel-debug.
+
+To add new debug options, add an option to _both_ config-debug and config-nodebug,
+and also new stanzas to the Makefile 'debug' and 'release' targets.
+
+Sometimes debug options get added to config-generic, or per-arch overrides
+instead of config-[no]debug. In this instance, the options should have no
+discernable performance impact, otherwise they belong in the debug files.
+

Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch

@@ -0,0 +1,42 @@
+From d4ae417828427de74e9f857f9caa49580aecf1fe Mon Sep 17 00:00:00 2001
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Mar 2012 09:28:15 -0500
+Subject: [PATCH 06/20] Restrict /dev/mem and /dev/kmem when module loading is
+ restricted
+
+Allowing users to write to address space makes it possible for the kernel
+to be subverted, avoiding module loading restrictions. Prevent this when
+any restrictions have been imposed on loading modules.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/char/mem.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/char/mem.c b/drivers/char/mem.c
+index 53fe675f9bd7..b52c88860532 100644
+--- a/drivers/char/mem.c
++++ b/drivers/char/mem.c
+@@ -167,6 +167,9 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
+ 	if (p != *ppos)
+ 		return -EFBIG;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (!valid_phys_addr_range(p, count))
+ 		return -EFAULT;
+ 
+@@ -513,6 +516,9 @@ static ssize_t write_kmem(struct file *file, const char __user *buf,
+ 	char *kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */
+ 	int err = 0;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	if (p < (unsigned long) high_memory) {
+ 		unsigned long to_write = min_t(unsigned long, count,
+ 					       (unsigned long)high_memory - p);
+-- 
+2.4.3
+

TODO

@@ -0,0 +1,10 @@
+Config TODOs:
+* review & disable a bunch of the I2C, RTC, DVB, SOUND options.
+
+Spec file TODOs:
+
+* modules-extra: Do a few more things to make it a bit more robust.
+  - Allow for comments in the mod-extra.list file.
+  - Don't fail the build if a module is listed but not built (maybe).
+  - See if it can be tied into Kconfig instead of module names.
+

USB-whiteheat-fix-potential-null-deref-at-probe.patch

@@ -0,0 +1,81 @@
+From 10d98bced414c6fc1d09db123e7f762d91b5ebea Mon Sep 17 00:00:00 2001
+From: Johan Hovold <johan@kernel.org>
+Date: Wed, 23 Sep 2015 11:41:42 -0700
+Subject: [PATCH] USB: whiteheat: fix potential null-deref at probe
+
+Fix potential null-pointer dereference at probe by making sure that the
+required endpoints are present.
+
+The whiteheat driver assumes there are at least five pairs of bulk
+endpoints, of which the final pair is used for the "command port". An
+attempt to bind to an interface with fewer bulk endpoints would
+currently lead to an oops.
+
+Fixes CVE-2015-5257.
+
+Reported-by: Moein Ghasemzadeh <moein@istuary.com>
+Cc: stable <stable@vger.kernel.org>
+Signed-off-by: Johan Hovold <johan@kernel.org>
+---
+ drivers/usb/serial/whiteheat.c | 31 +++++++++++++++++++++++++++++++
+ 1 file changed, 31 insertions(+)
+
+diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
+index 6c3734d2b45a..d3ea90bef84d 100644
+--- a/drivers/usb/serial/whiteheat.c
++++ b/drivers/usb/serial/whiteheat.c
+@@ -80,6 +80,8 @@ static int  whiteheat_firmware_download(struct usb_serial *serial,
+ static int  whiteheat_firmware_attach(struct usb_serial *serial);
+ 
+ /* function prototypes for the Connect Tech WhiteHEAT serial converter */
++static int whiteheat_probe(struct usb_serial *serial,
++				const struct usb_device_id *id);
+ static int  whiteheat_attach(struct usb_serial *serial);
+ static void whiteheat_release(struct usb_serial *serial);
+ static int  whiteheat_port_probe(struct usb_serial_port *port);
+@@ -116,6 +118,7 @@ static struct usb_serial_driver whiteheat_device = {
+ 	.description =		"Connect Tech - WhiteHEAT",
+ 	.id_table =		id_table_std,
+ 	.num_ports =		4,
++	.probe =		whiteheat_probe,
+ 	.attach =		whiteheat_attach,
+ 	.release =		whiteheat_release,
+ 	.port_probe =		whiteheat_port_probe,
+@@ -217,6 +220,34 @@ static int whiteheat_firmware_attach(struct usb_serial *serial)
+ /*****************************************************************************
+  * Connect Tech's White Heat serial driver functions
+  *****************************************************************************/
++
++static int whiteheat_probe(struct usb_serial *serial,
++				const struct usb_device_id *id)
++{
++	struct usb_host_interface *iface_desc;
++	struct usb_endpoint_descriptor *endpoint;
++	size_t num_bulk_in = 0;
++	size_t num_bulk_out = 0;
++	size_t min_num_bulk;
++	unsigned int i;
++
++	iface_desc = serial->interface->cur_altsetting;
++
++	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
++		endpoint = &iface_desc->endpoint[i].desc;
++		if (usb_endpoint_is_bulk_in(endpoint))
++			++num_bulk_in;
++		if (usb_endpoint_is_bulk_out(endpoint))
++			++num_bulk_out;
++	}
++
++	min_num_bulk = COMMAND_PORT + 1;
++	if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
++		return -ENODEV;
++
++	return 0;
++}
++
+ static int whiteheat_attach(struct usb_serial *serial)
+ {
+ 	struct usb_serial_port *command_port;
+-- 
+2.4.3
+

acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch

@@ -0,0 +1,39 @@
+From 32d3dc2147823a32c8a7771d8fe0f2d1ef057c6a Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@redhat.com>
+Date: Mon, 25 Jun 2012 19:57:30 -0400
+Subject: [PATCH 07/20] acpi: Ignore acpi_rsdp kernel parameter when module
+ loading is restricted
+
+This option allows userspace to pass the RSDP address to the kernel, which
+makes it possible for a user to circumvent any restrictions imposed on
+loading modules. Disable it in that case.
+
+Signed-off-by: Josh Boyer <jwboyer@redhat.com>
+---
+ drivers/acpi/osl.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
+index 739a4a6b3b9b..9ef2a020a7a9 100644
+--- a/drivers/acpi/osl.c
++++ b/drivers/acpi/osl.c
+@@ -40,6 +40,7 @@
+ #include <linux/list.h>
+ #include <linux/jiffies.h>
+ #include <linux/semaphore.h>
++#include <linux/module.h>
+ 
+ #include <asm/io.h>
+ #include <asm/uaccess.h>
+@@ -253,7 +254,7 @@ early_param("acpi_rsdp", setup_acpi_rsdp);
+ acpi_physical_address __init acpi_os_get_root_pointer(void)
+ {
+ #ifdef CONFIG_KEXEC
+-	if (acpi_rsdp)
++	if (acpi_rsdp && !secure_modules())
+ 		return acpi_rsdp;
+ #endif
+ 
+-- 
+2.4.3
+

acpi-video-Add-force-native-backlight-quirk-for-Leno.patch

@@ -0,0 +1,81 @@
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 3 Mar 2015 08:31:24 +0100
+Subject: [PATCH] acpi: video: Add force native backlight quirk for Lenovo
+ Ideapad Z570
+
+The Lenovo Ideapad Z570 (which is an Acer in disguise like some other Ideapads)
+has a broken acpi_video interface, this was fixed in commmit a11d342fb8
+("ACPI / video: force vendor backlight on Lenovo Ideapad Z570").
+
+Which stops acpi_video from registering a backlight interface, but this is
+only a partial fix, because for people who have the ideapad-laptop module
+installed that module will now register a backlight interface, which also
+does not work, so we need to use the native intel_backlight interface.
+
+The Lenovo Ideapad 570 is a pre-win8 laptop / too old for the acpi-video code
+to automatically prefer the native backlight interface, so add a quirk for it.
+
+This commit also removes the previous incomplete fix.
+
+BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1187004
+Cc: Stepan Bujnak <stepanbujnak@fastmail.fm>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/acpi/video.c        | 17 +++++++++++++++++
+ drivers/acpi/video_detect.c |  8 --------
+ 2 files changed, 17 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index 70ea37bea84f..d9bf8ba7d848 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -425,6 +425,12 @@ static int __init video_disable_native_backlight(const struct dmi_system_id *d)
+ 	return 0;
+ }
+ 
++static int __init video_enable_native_backlight(const struct dmi_system_id *d)
++{
++	use_native_backlight_dmi = NATIVE_BACKLIGHT_ON;
++	return 0;
++}
++
+ static struct dmi_system_id video_dmi_table[] __initdata = {
+ 	/*
+ 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+@@ -566,6 +572,17 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
+ 		DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"),
+ 		},
+ 	},
++
++	/* Non win8 machines which need native backlight nevertheless */
++	{
++	 /* https://bugzilla.redhat.com/show_bug.cgi?id=1187004 */
++	 .callback = video_enable_native_backlight,
++	 .ident = "Lenovo Ideapad Z570",
++	 .matches = {
++		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
++		DMI_MATCH(DMI_PRODUCT_NAME, "102434U"),
++		},
++	},
+ 	{}
+ };
+ 
+diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
+index 27c43499977a..c42feb2bacd0 100644
+--- a/drivers/acpi/video_detect.c
++++ b/drivers/acpi/video_detect.c
+@@ -174,14 +174,6 @@ static struct dmi_system_id video_detect_dmi_table[] = {
+ 		DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5737"),
+ 		},
+ 	},
+-	{
+-	.callback = video_detect_force_vendor,
+-	.ident = "Lenovo IdeaPad Z570",
+-	.matches = {
+-		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+-		DMI_MATCH(DMI_PRODUCT_VERSION, "Ideapad Z570"),
+-		},
+-	},
+ 	{ },
+ };
+ 

acpi-video-Allow-forcing-native-backlight-on-non-win.patch

@@ -0,0 +1,73 @@
+From: Aaron Lu <aaron.lu@intel.com>
+Date: Wed, 11 Mar 2015 14:14:56 +0800
+Subject: [PATCH] acpi: video: Allow forcing native backlight on non win8
+ machines
+
+The native backlight behavior (so not registering both the acpi-video
+and the vendor backlight driver) can be useful on some non win8 machines
+too, so change the behavior of the video.use_native_backlight=1 or 0
+kernel cmdline option to be: if user has set video.use_native_backlight=1
+or 0, use that no matter if it is a win8 system or not. Also, we will
+put some known systems into the DMI table to make them either use native
+backlight interface or not, and the use_native_backlight_dmi is used to
+reflect that.
+
+Original-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Aaron Lu <aaron.lu@intel.com>
+Acked-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ drivers/acpi/video.c | 19 +++++++++++++------
+ 1 file changed, 13 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index db70d550f526..70ea37bea84f 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -82,9 +82,15 @@ module_param(allow_duplicates, bool, 0644);
+  * For Windows 8 systems: used to decide if video module
+  * should skip registering backlight interface of its own.
+  */
+-static int use_native_backlight_param = -1;
++enum {
++	NATIVE_BACKLIGHT_NOT_SET = -1,
++	NATIVE_BACKLIGHT_OFF,
++	NATIVE_BACKLIGHT_ON,
++};
++
++static int use_native_backlight_param = NATIVE_BACKLIGHT_NOT_SET;
+ module_param_named(use_native_backlight, use_native_backlight_param, int, 0444);
+-static bool use_native_backlight_dmi = true;
++static int use_native_backlight_dmi = NATIVE_BACKLIGHT_NOT_SET;
+ 
+ static int register_count;
+ static struct mutex video_list_lock;
+@@ -237,15 +243,16 @@ static void acpi_video_switch_brightness(struct work_struct *work);
+ 
+ static bool acpi_video_use_native_backlight(void)
+ {
+-	if (use_native_backlight_param != -1)
++	if (use_native_backlight_param != NATIVE_BACKLIGHT_NOT_SET)
+ 		return use_native_backlight_param;
+-	else
++	else if (use_native_backlight_dmi != NATIVE_BACKLIGHT_NOT_SET)
+ 		return use_native_backlight_dmi;
++	return acpi_osi_is_win8();
+ }
+ 
+ bool acpi_video_verify_backlight_support(void)
+ {
+-	if (acpi_osi_is_win8() && acpi_video_use_native_backlight() &&
++	if (acpi_video_use_native_backlight() &&
+ 	    backlight_device_registered(BACKLIGHT_RAW))
+ 		return false;
+ 	return acpi_video_backlight_support();
+@@ -414,7 +421,7 @@ static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+ 
+ static int __init video_disable_native_backlight(const struct dmi_system_id *d)
+ {
+-	use_native_backlight_dmi = false;
++	use_native_backlight_dmi = NATIVE_BACKLIGHT_OFF;
+ 	return 0;
+ }
+ 

arm-revert-mmc-omap_hsmmc-Use-dma_request_chan-for-reque.patch

@@ -0,0 +1,100 @@
+From bb3e08008c0e48fd4f51a0f0957eecae61a24d69 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 1 Nov 2016 09:35:30 +0000
+Subject: [PATCH] Revert "mmc: omap_hsmmc: Use dma_request_chan() for
+ requesting DMA channel"
+
+This reverts commit 81eef6ca92014845d40e3f1310e42b7010303acc.
+---
+ drivers/mmc/host/omap_hsmmc.c | 50 ++++++++++++++++++++++++++++++++++---------
+ 1 file changed, 40 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
+index 24ebc9a..3563321 100644
+--- a/drivers/mmc/host/omap_hsmmc.c
++++ b/drivers/mmc/host/omap_hsmmc.c
+@@ -32,6 +32,7 @@
+ #include <linux/of_irq.h>
+ #include <linux/of_gpio.h>
+ #include <linux/of_device.h>
++#include <linux/omap-dmaengine.h>
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/core.h>
+ #include <linux/mmc/mmc.h>
+@@ -1992,6 +1993,8 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
+ 	struct resource *res;
+ 	int ret, irq;
+ 	const struct of_device_id *match;
++	dma_cap_mask_t mask;
++	unsigned tx_req, rx_req;
+ 	const struct omap_mmc_of_data *data;
+ 	void __iomem *base;
+ 
+@@ -2121,17 +2124,44 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
+ 
+ 	omap_hsmmc_conf_bus_power(host);
+ 
+-	host->rx_chan = dma_request_chan(&pdev->dev, "rx");
+-	if (IS_ERR(host->rx_chan)) {
+-		dev_err(mmc_dev(host->mmc), "RX DMA channel request failed\n");
+-		ret = PTR_ERR(host->rx_chan);
++	if (!pdev->dev.of_node) {
++		res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
++		if (!res) {
++			dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n");
++			ret = -ENXIO;
++			goto err_irq;
++		}
++		tx_req = res->start;
++
++		res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
++		if (!res) {
++			dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n");
++			ret = -ENXIO;
++			goto err_irq;
++		}
++		rx_req = res->start;
++	}
++
++	dma_cap_zero(mask);
++	dma_cap_set(DMA_SLAVE, mask);
++
++	host->rx_chan =
++		dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
++						 &rx_req, &pdev->dev, "rx");
++
++	if (!host->rx_chan) {
++		dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel\n");
++		ret = -ENXIO;
+ 		goto err_irq;
+ 	}
+ 
+-	host->tx_chan = dma_request_chan(&pdev->dev, "tx");
+-	if (IS_ERR(host->tx_chan)) {
+-		dev_err(mmc_dev(host->mmc), "TX DMA channel request failed\n");
+-		ret = PTR_ERR(host->tx_chan);
++	host->tx_chan =
++		dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
++						 &tx_req, &pdev->dev, "tx");
++
++	if (!host->tx_chan) {
++		dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel\n");
++		ret = -ENXIO;
+ 		goto err_irq;
+ 	}
+ 
+@@ -2189,9 +2219,9 @@ err_slot_name:
+ 	mmc_remove_host(mmc);
+ err_irq:
+ 	device_init_wakeup(&pdev->dev, false);
+-	if (!IS_ERR_OR_NULL(host->tx_chan))
++	if (host->tx_chan)
+ 		dma_release_channel(host->tx_chan);
+-	if (!IS_ERR_OR_NULL(host->rx_chan))
++	if (host->rx_chan)
+ 		dma_release_channel(host->rx_chan);
+ 	pm_runtime_dont_use_autosuspend(host->dev);
+ 	pm_runtime_put_sync(host->dev);
+-- 
+2.9.3
+

arm64-ACPI-parse-SPCR-table.patch

@@ -0,0 +1,596 @@
+From patchwork Fri Aug 12 11:07:14 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,1/4] of/serial: move earlycon early_param handling to serial
+From: Aleksey Makarov <aleksey.makarov@linaro.org>
+X-Patchwork-Id: 9276727
+Message-Id: <20160812110717.12351-1-aleksey.makarov@linaro.org>
+To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
+ Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Cc: linux-serial@vger.kernel.org, linux-acpi@vger.kernel.org,
+ linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
+ Aleksey Makarov <aleksey.makarov@linaro.org>,
+ Russell King <linux@arm.linux.org.uk>, Len Brown <lenb@kernel.org>,
+ Leif Lindholm <leif.lindholm@linaro.org>,
+ Graeme Gregory <graeme.gregory@linaro.org>, Al Stone <ahs3@redhat.com>,
+ Christopher Covington <cov@codeaurora.org>,
+ Yury Norov <ynorov@caviumnetworks.com>,
+ Peter Hurley <peter@hurleysoftware.com>,
+ Andy Shevchenko <andy.shevchenko@gmail.com>,
+ "Zheng, Lv" <lv.zheng@intel.com>, Mark Salter <msalter@redhat.com>,
+ Kefeng Wang <wangkefeng.wang@huawei.com>,
+ Rob Herring <robh+dt@kernel.org>, Frank Rowand <frowand.list@gmail.com>,
+ Jiri Slaby <jslaby@suse.com>, devicetree@vger.kernel.org
+Date: Fri, 12 Aug 2016 14:07:14 +0300
+
+From: Leif Lindholm <leif.lindholm@linaro.org>
+
+We have multiple "earlycon" early_param handlers - merge the DT one into
+the main earlycon one.  It's a cleanup that also will be useful
+to defer setting up DT console until ACPI/DT decision is made.
+
+Rename the exported function to avoid clashing with the function from
+arch/microblaze/kernel/prom.c
+
+Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
+Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
+Acked-by: Rob Herring <robh@kernel.org>
+Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
+Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
+---
+ drivers/of/fdt.c              | 11 +----------
+ drivers/tty/serial/earlycon.c |  2 +-
+ include/linux/of_fdt.h        |  3 +++
+ 3 files changed, 5 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
+index 55f1b83..741cac53 100644
+--- a/drivers/of/fdt.c
++++ b/drivers/of/fdt.c
+@@ -924,7 +924,7 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
+ 
+ #ifdef CONFIG_SERIAL_EARLYCON
+ 
+-static int __init early_init_dt_scan_chosen_serial(void)
++int __init early_init_dt_scan_chosen_stdout(void)
+ {
+ 	int offset;
+ 	const char *p, *q, *options = NULL;
+@@ -968,15 +968,6 @@ static int __init early_init_dt_scan_chosen_serial(void)
+ 	}
+ 	return -ENODEV;
+ }
+-
+-static int __init setup_of_earlycon(char *buf)
+-{
+-	if (buf)
+-		return 0;
+-
+-	return early_init_dt_scan_chosen_serial();
+-}
+-early_param("earlycon", setup_of_earlycon);
+ #endif
+ 
+ /**
+diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
+index 067783f..7aae655 100644
+--- a/drivers/tty/serial/earlycon.c
++++ b/drivers/tty/serial/earlycon.c
+@@ -209,7 +209,7 @@ static int __init param_setup_earlycon(char *buf)
+ 	 * don't generate a warning from parse_early_params() in that case
+ 	 */
+ 	if (!buf || !buf[0])
+-		return 0;
++		return early_init_dt_scan_chosen_stdout();
+ 
+ 	err = setup_earlycon(buf);
+ 	if (err == -ENOENT || err == -EALREADY)
+diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
+index 26c3302..4341f32 100644
+--- a/include/linux/of_fdt.h
++++ b/include/linux/of_fdt.h
+@@ -14,6 +14,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/init.h>
++#include <linux/errno.h>
+ 
+ /* Definitions used by the flattened device tree */
+ #define OF_DT_HEADER		0xd00dfeed	/* marker */
+@@ -66,6 +67,7 @@ extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
+ 				     int depth, void *data);
+ extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
+ 				     int depth, void *data);
++extern int early_init_dt_scan_chosen_stdout(void);
+ extern void early_init_fdt_scan_reserved_mem(void);
+ extern void early_init_fdt_reserve_self(void);
+ extern void early_init_dt_add_memory_arch(u64 base, u64 size);
+@@ -94,6 +96,7 @@ extern void early_get_first_memblock_info(void *, phys_addr_t *);
+ extern u64 of_flat_dt_translate_address(unsigned long node);
+ extern void of_fdt_limit_memory(int limit);
+ #else /* CONFIG_OF_FLATTREE */
++static inline int early_init_dt_scan_chosen_stdout(void) { return -ENODEV; }
+ static inline void early_init_fdt_scan_reserved_mem(void) {}
+ static inline void early_init_fdt_reserve_self(void) {}
+ static inline const char *of_flat_dt_get_machine_name(void) { return NULL; }
+From patchwork Thu Aug 11 15:31:39 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,2/4] ACPI: parse SPCR and enable matching console
+From: Aleksey Makarov <aleksey.makarov@linaro.org>
+X-Patchwork-Id: 9275443
+Message-Id: <20160811153152.755-3-aleksey.makarov@linaro.org>
+To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
+ Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Cc: linux-serial@vger.kernel.org, linux-acpi@vger.kernel.org,
+ linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
+ Aleksey Makarov <aleksey.makarov@linaro.org>,
+ Russell King <linux@arm.linux.org.uk>, Len Brown <lenb@kernel.org>,
+ Leif Lindholm <leif.lindholm@linaro.org>,
+ Graeme Gregory <graeme.gregory@linaro.org>, Al Stone <ahs3@redhat.com>,
+ Christopher Covington <cov@codeaurora.org>,
+ Yury Norov <ynorov@caviumnetworks.com>,
+ Peter Hurley <peter@hurleysoftware.com>,
+ Andy Shevchenko <andy.shevchenko@gmail.com>,
+ "Zheng, Lv" <lv.zheng@intel.com>, Mark Salter <msalter@redhat.com>,
+ Kefeng Wang <wangkefeng.wang@huawei.com>, Jiri Slaby <jslaby@suse.com>
+Date: Thu, 11 Aug 2016 18:31:39 +0300
+
+'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port
+Console Redirection Table) [2] as a mandatory ACPI table that
+specifies the configuration of serial console.
+
+Defer initialization of DT earlycon until ACPI/DT decision is made.
+
+Parse the ACPI SPCR table, setup earlycon if required,
+enable specified console.
+
+Thanks to Peter Hurley for explaining how this should work.
+
+[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html
+[2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx
+
+Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
+Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
+Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
+Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+---
+ drivers/acpi/Kconfig          |   3 ++
+ drivers/acpi/Makefile         |   1 +
+ drivers/acpi/spcr.c           | 111 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/tty/serial/earlycon.c |  19 +++++++-
+ include/linux/acpi.h          |   6 +++
+ include/linux/serial_core.h   |   9 +++-
+ 6 files changed, 146 insertions(+), 3 deletions(-)
+ create mode 100644 drivers/acpi/spcr.c
+
+diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
+index 6cef2d1..4a269f9 100644
+--- a/drivers/acpi/Kconfig
++++ b/drivers/acpi/Kconfig
+@@ -77,6 +77,9 @@ config ACPI_DEBUGGER_USER
+ 
+ endif
+ 
++config ACPI_SPCR_TABLE
++	bool
++
+ config ACPI_SLEEP
+ 	bool
+ 	depends on SUSPEND || HIBERNATION
+diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
+index e5ada78..d799593 100644
+--- a/drivers/acpi/Makefile
++++ b/drivers/acpi/Makefile
+@@ -81,6 +81,7 @@ obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
+ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
+ obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
+ obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc_acpi.o
++obj-$(CONFIG_ACPI_SPCR_TABLE)	+= spcr.o
+ obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
+ 
+ # processor has its own "processor." module_param namespace
+diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
+new file mode 100644
+index 0000000..e8d7bc7
+--- /dev/null
++++ b/drivers/acpi/spcr.c
+@@ -0,0 +1,111 @@
++/*
++ * Copyright (c) 2012, Intel Corporation
++ * Copyright (c) 2015, Red Hat, Inc.
++ * Copyright (c) 2015, 2016 Linaro Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#define pr_fmt(fmt) "ACPI: SPCR: " fmt
++
++#include <linux/acpi.h>
++#include <linux/console.h>
++#include <linux/kernel.h>
++#include <linux/serial_core.h>
++
++/**
++ * parse_spcr() - parse ACPI SPCR table and add preferred console
++ *
++ * @earlycon: set up earlycon for the console specified by the table
++ *
++ * For the architectures with support for ACPI, CONFIG_ACPI_SPCR_TABLE may be
++ * defined to parse ACPI SPCR table.  As a result of the parsing preferred
++ * console is registered and if @earlycon is true, earlycon is set up.
++ *
++ * When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
++ * from arch inintialization code as soon as the DT/ACPI decision is made.
++ *
++ */
++int __init parse_spcr(bool earlycon)
++{
++	static char opts[64];
++	struct acpi_table_spcr *table;
++	acpi_size table_size;
++	acpi_status status;
++	char *uart;
++	char *iotype;
++	int baud_rate;
++	int err;
++
++	if (acpi_disabled)
++		return -ENODEV;
++
++	status = acpi_get_table_with_size(ACPI_SIG_SPCR, 0,
++					  (struct acpi_table_header **)&table,
++					  &table_size);
++
++	if (ACPI_FAILURE(status))
++		return -ENOENT;
++
++	if (table->header.revision < 2) {
++		err = -ENOENT;
++		pr_err("wrong table version\n");
++		goto done;
++	}
++
++	iotype = table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY ?
++			"mmio" : "io";
++
++	switch (table->interface_type) {
++	case ACPI_DBG2_ARM_SBSA_32BIT:
++		iotype = "mmio32";
++		/* fall through */
++	case ACPI_DBG2_ARM_PL011:
++	case ACPI_DBG2_ARM_SBSA_GENERIC:
++	case ACPI_DBG2_BCM2835:
++		uart = "pl011";
++		break;
++	case ACPI_DBG2_16550_COMPATIBLE:
++	case ACPI_DBG2_16550_SUBSET:
++		uart = "uart";
++		break;
++	default:
++		err = -ENOENT;
++		goto done;
++	}
++
++	switch (table->baud_rate) {
++	case 3:
++		baud_rate = 9600;
++		break;
++	case 4:
++		baud_rate = 19200;
++		break;
++	case 6:
++		baud_rate = 57600;
++		break;
++	case 7:
++		baud_rate = 115200;
++		break;
++	default:
++		err = -ENOENT;
++		goto done;
++	}
++
++	snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
++		 table->serial_port.address, baud_rate);
++
++	pr_info("console: %s\n", opts);
++
++	if (earlycon)
++		setup_earlycon(opts);
++
++	err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
++
++done:
++	early_acpi_os_unmap_memory((void __iomem *)table, table_size);
++	return err;
++}
+diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
+index 7aae655..ea00b9f 100644
+--- a/drivers/tty/serial/earlycon.c
++++ b/drivers/tty/serial/earlycon.c
+@@ -21,6 +21,7 @@
+ #include <linux/sizes.h>
+ #include <linux/of.h>
+ #include <linux/of_fdt.h>
++#include <linux/acpi.h>
+ 
+ #ifdef CONFIG_FIX_EARLYCON_MEM
+ #include <asm/fixmap.h>
+@@ -199,6 +200,14 @@ int __init setup_earlycon(char *buf)
+ 	return -ENOENT;
+ }
+ 
++/*
++ * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
++ * command line does not start DT earlycon immediately, instead it defers
++ * starting it until DT/ACPI decision is made.  At that time if ACPI is enabled
++ * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
++ */
++bool earlycon_init_is_deferred __initdata;
++
+ /* early_param wrapper for setup_earlycon() */
+ static int __init param_setup_earlycon(char *buf)
+ {
+@@ -208,8 +217,14 @@ static int __init param_setup_earlycon(char *buf)
+ 	 * Just 'earlycon' is a valid param for devicetree earlycons;
+ 	 * don't generate a warning from parse_early_params() in that case
+ 	 */
+-	if (!buf || !buf[0])
+-		return early_init_dt_scan_chosen_stdout();
++	if (!buf || !buf[0]) {
++		if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
++			earlycon_init_is_deferred = true;
++			return 0;
++		} else {
++			return early_init_dt_scan_chosen_stdout();
++		}
++	}
+ 
+ 	err = setup_earlycon(buf);
+ 	if (err == -ENOENT || err == -EALREADY)
+diff --git a/include/linux/acpi.h b/include/linux/acpi.h
+index 4d8452c..32407e4 100644
+--- a/include/linux/acpi.h
++++ b/include/linux/acpi.h
+@@ -1074,4 +1074,10 @@ void acpi_table_upgrade(void);
+ static inline void acpi_table_upgrade(void) { }
+ #endif
+ 
++#ifdef CONFIG_ACPI_SPCR_TABLE
++int parse_spcr(bool earlycon);
++#else
++static inline int parse_spcr(bool earlycon) { return 0; }
++#endif
++
+ #endif	/*_LINUX_ACPI_H*/
+diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
+index 2f44e20..04b8cfb 100644
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -367,11 +367,18 @@ extern const struct earlycon_id __earlycon_table_end[];
+ 
+ #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
+ 
+-extern int setup_earlycon(char *buf);
+ extern int of_setup_earlycon(const struct earlycon_id *match,
+ 			     unsigned long node,
+ 			     const char *options);
+ 
++#ifdef CONFIG_SERIAL_EARLYCON
++extern bool earlycon_init_is_deferred __initdata;
++extern int setup_earlycon(char *buf);
++#else
++static const bool earlycon_init_is_deferred;
++static inline int setup_earlycon(char *buf) { return 0; }
++#endif
++
+ struct uart_port *uart_get_console(struct uart_port *ports, int nr,
+ 				   struct console *c);
+ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
+From patchwork Thu Aug 11 15:31:40 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,3/4] ARM64: ACPI: enable ACPI_SPCR_TABLE
+From: Aleksey Makarov <aleksey.makarov@linaro.org>
+X-Patchwork-Id: 9275457
+Message-Id: <20160811153152.755-4-aleksey.makarov@linaro.org>
+To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
+ Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Cc: linux-serial@vger.kernel.org, linux-acpi@vger.kernel.org,
+ linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
+ Aleksey Makarov <aleksey.makarov@linaro.org>,
+ Russell King <linux@arm.linux.org.uk>, Len Brown <lenb@kernel.org>,
+ Leif Lindholm <leif.lindholm@linaro.org>,
+ Graeme Gregory <graeme.gregory@linaro.org>, Al Stone <ahs3@redhat.com>,
+ Christopher Covington <cov@codeaurora.org>,
+ Yury Norov <ynorov@caviumnetworks.com>,
+ Peter Hurley <peter@hurleysoftware.com>,
+ Andy Shevchenko <andy.shevchenko@gmail.com>,
+ "Zheng, Lv" <lv.zheng@intel.com>, Mark Salter <msalter@redhat.com>,
+ Kefeng Wang <wangkefeng.wang@huawei.com>,
+ Catalin Marinas <catalin.marinas@arm.com>,
+ Will Deacon <will.deacon@arm.com>
+Date: Thu, 11 Aug 2016 18:31:40 +0300
+
+SBBR mentions SPCR as a mandatory ACPI table.  So enable it for ARM64
+
+Earlycon should be set up as early as possible.  ACPI boot tables are
+mapped in arch/arm64/kernel/acpi.c:acpi_boot_table_init() that
+is called from setup_arch() and that's where we parse SPCR.
+So it has to be opted-in per-arch.
+
+When ACPI_SPCR_TABLE is defined initialization of DT earlycon is
+deferred until the DT/ACPI decision is done.  Initialize DT earlycon
+if ACPI is disabled.
+
+Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
+Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
+---
+ arch/arm64/Kconfig       |  1 +
+ arch/arm64/kernel/acpi.c | 11 ++++++++++-
+ 2 files changed, 11 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
+index 69c8787..a54dfc0 100644
+--- a/arch/arm64/Kconfig
++++ b/arch/arm64/Kconfig
+@@ -4,6 +4,7 @@ config ARM64
+ 	select ACPI_GENERIC_GSI if ACPI
+ 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+ 	select ACPI_MCFG if ACPI
++	select ACPI_SPCR_TABLE if ACPI
+ 	select ARCH_HAS_DEVMEM_IS_ALLOWED
+ 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
+ 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
+index 3e4f1a4..252a6d9 100644
+--- a/arch/arm64/kernel/acpi.c
++++ b/arch/arm64/kernel/acpi.c
+@@ -24,6 +24,7 @@
+ #include <linux/memblock.h>
+ #include <linux/of_fdt.h>
+ #include <linux/smp.h>
++#include <linux/serial_core.h>
+ 
+ #include <asm/cputype.h>
+ #include <asm/cpu_ops.h>
+@@ -206,7 +207,7 @@ void __init acpi_boot_table_init(void)
+ 	if (param_acpi_off ||
+ 	    (!param_acpi_on && !param_acpi_force &&
+ 	     of_scan_flat_dt(dt_scan_depth1_nodes, NULL)))
+-		return;
++		goto done;
+ 
+ 	/*
+ 	 * ACPI is disabled at this point. Enable it in order to parse
+@@ -226,6 +227,14 @@ void __init acpi_boot_table_init(void)
+ 		if (!param_acpi_force)
+ 			disable_acpi();
+ 	}
++
++done:
++	if (acpi_disabled) {
++		if (earlycon_init_is_deferred)
++			early_init_dt_scan_chosen_stdout();
++	} else {
++		parse_spcr(earlycon_init_is_deferred);
++	}
+ }
+ 
+ #ifdef CONFIG_ACPI_APEI
+From patchwork Mon Aug 15 13:35:03 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,4/4] serial: pl011: add console matching function
+From: Aleksey Makarov <aleksey.makarov@linaro.org>
+X-Patchwork-Id: 9280971
+Message-Id: <20160815133505.15294-1-aleksey.makarov@linaro.org>
+To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
+ Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Cc: linux-serial@vger.kernel.org, linux-acpi@vger.kernel.org,
+ linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
+ Aleksey Makarov <aleksey.makarov@linaro.org>,
+ Russell King <linux@arm.linux.org.uk>, Len Brown <lenb@kernel.org>,
+ Leif Lindholm <leif.lindholm@linaro.org>,
+ Graeme Gregory <graeme.gregory@linaro.org>, Al Stone <ahs3@redhat.com>,
+ Christopher Covington <cov@codeaurora.org>,
+ Yury Norov <ynorov@caviumnetworks.com>,
+ Peter Hurley <peter@hurleysoftware.com>,
+ Andy Shevchenko <andy.shevchenko@gmail.com>,
+ "Zheng, Lv" <lv.zheng@intel.com>, Mark Salter <msalter@redhat.com>,
+ Kefeng Wang <wangkefeng.wang@huawei.com>,
+ Russell King <linux@armlinux.org.uk>, Jiri Slaby <jslaby@suse.com>
+Date: Mon, 15 Aug 2016 16:35:03 +0300
+
+This patch adds function pl011_console_match() that implements
+method match of struct console.  It allows to match consoles against
+data specified in a string, for example taken from command line or
+compiled by ACPI SPCR table handler.
+
+Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
+Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
+Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/tty/serial/amba-pl011.c | 55 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 55 insertions(+)
+
+diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
+index 8a9e213..2f9af8a 100644
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -2288,12 +2288,67 @@ static int __init pl011_console_setup(struct console *co, char *options)
+ 	return uart_set_options(&uap->port, co, baud, parity, bits, flow);
+ }
+ 
++/**
++ *	pl011_console_match - non-standard console matching
++ *	@co:	  registering console
++ *	@name:	  name from console command line
++ *	@idx:	  index from console command line
++ *	@options: ptr to option string from console command line
++ *
++ *	Only attempts to match console command lines of the form:
++ *	    console=pl011,mmio|mmio32,<addr>[,<options>]
++ *	    console=pl011,0x<addr>[,<options>]
++ *	This form is used to register an initial earlycon boot console and
++ *	replace it with the amba_console at pl011 driver init.
++ *
++ *	Performs console setup for a match (as required by interface)
++ *	If no <options> are specified, then assume the h/w is already setup.
++ *
++ *	Returns 0 if console matches; otherwise non-zero to use default matching
++ */
++static int __init pl011_console_match(struct console *co, char *name, int idx,
++				      char *options)
++{
++	unsigned char iotype;
++	unsigned long addr;
++	int i;
++
++	if (strcmp(name, "pl011") != 0)
++		return -ENODEV;
++
++	if (uart_parse_earlycon(options, &iotype, &addr, &options))
++		return -ENODEV;
++
++	if (iotype != UPIO_MEM && iotype != UPIO_MEM32)
++		return -ENODEV;
++
++	/* try to match the port specified on the command line */
++	for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
++		struct uart_port *port;
++
++		if (!amba_ports[i])
++			continue;
++
++		port = &amba_ports[i]->port;
++
++		if (port->mapbase != addr)
++			continue;
++
++		co->index = i;
++		port->cons = co;
++		return pl011_console_setup(co, options);
++	}
++
++	return -ENODEV;
++}
++
+ static struct uart_driver amba_reg;
+ static struct console amba_console = {
+ 	.name		= "ttyAMA",
+ 	.write		= pl011_console_write,
+ 	.device		= uart_console_device,
+ 	.setup		= pl011_console_setup,
++	.match		= pl011_console_match,
+ 	.flags		= CON_PRINTBUFFER,
+ 	.index		= -1,
+ 	.data		= &amba_reg,

arm64-avoid-needing-console-to-enable-serial-console.patch

@@ -0,0 +1,46 @@
+From ce7a9e482dcf66d155e74b39ada1708cf6d9cb25 Mon Sep 17 00:00:00 2001
+From: Mark Salter <msalter@redhat.com>
+Date: Wed, 25 Mar 2015 14:17:50 -0400
+Subject: [PATCH] arm64: avoid needing console= to enable serial console
+
+Tell kernel to prefer one of the serial ports for console on
+platforms currently supported (pl011 or 8250). console= on
+command line will override these assumed preferences. This is
+just a hack to get the behavior we want from DT provided by
+firmware.
+
+Signed-off-by: Mark Salter <msalter@redhat.com>
+---
+ arch/arm64/kernel/setup.c | 20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
+index 9dc67769b6a4..dfac33b47423 100644
+--- a/arch/arm64/kernel/setup.c
++++ b/arch/arm64/kernel/setup.c
+@@ -417,3 +417,22 @@ static int __init register_kernel_offset_dumper(void)
+ 	return 0;
+ }
+ __initcall(register_kernel_offset_dumper);
++
++/*
++ * Temporary hack to avoid need for console= on command line
++ */
++static int __init arm64_console_setup(void)
++{
++	/* Allow cmdline to override our assumed preferences */
++	if (console_set_on_cmdline)
++		return 0;
++
++	if (IS_ENABLED(CONFIG_SERIAL_AMBA_PL011))
++		add_preferred_console("ttyAMA", 0, "115200");
++
++	if (IS_ENABLED(CONFIG_SERIAL_8250))
++		add_preferred_console("ttyS", 0, "115200");
++
++	return 0;
++}
++early_initcall(arm64_console_setup);
+-- 
+2.5.0
+

arm64-pcie-quirks.patch

@@ -0,0 +1,977 @@
+From 5c4f8b5b68451e5d208a5aefb195fdd108629da4 Mon Sep 17 00:00:00 2001
+From: Tomasz Nowicki <tn@semihalf.com>
+Date: Fri, 9 Sep 2016 21:24:03 +0200
+Subject: [PATCH 1/6] PCI/ACPI: Extend pci_mcfg_lookup() responsibilities
+
+In preparation for adding MCFG platform specific quirk handling move
+CFG resource calculation and ECAM ops assignment to pci_mcfg_lookup().
+It becomes the gate for further ops and CFG resource manipulation
+in arch-agnostic code (drivers/acpi/pci_mcfg.c).
+
+No functionality changes in this patch.
+
+Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
+---
+ arch/arm64/kernel/pci.c  | 17 +++++------------
+ drivers/acpi/pci_mcfg.c  | 28 +++++++++++++++++++++++++---
+ include/linux/pci-acpi.h |  4 +++-
+ 3 files changed, 33 insertions(+), 16 deletions(-)
+
+diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
+index acf3872..fb439c7 100644
+--- a/arch/arm64/kernel/pci.c
++++ b/arch/arm64/kernel/pci.c
+@@ -125,24 +125,17 @@ pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+ 	u16 seg = root->segment;
+ 	struct pci_config_window *cfg;
+ 	struct resource cfgres;
+-	unsigned int bsz;
++	struct pci_ecam_ops *ecam_ops;
++	int ret;
+ 
+-	/* Use address from _CBA if present, otherwise lookup MCFG */
+-	if (!root->mcfg_addr)
+-		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
+-
+-	if (!root->mcfg_addr) {
++	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
++	if (ret) {
+ 		dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
+ 			seg, bus_res);
+ 		return NULL;
+ 	}
+ 
+-	bsz = 1 << pci_generic_ecam_ops.bus_shift;
+-	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
+-	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
+-	cfgres.flags = IORESOURCE_MEM;
+-	cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
+-			      &pci_generic_ecam_ops);
++	cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res, ecam_ops);
+ 	if (IS_ERR(cfg)) {
+ 		dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
+ 			seg, bus_res, PTR_ERR(cfg));
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index b5b376e..ffcc651 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -22,6 +22,7 @@
+ #include <linux/kernel.h>
+ #include <linux/pci.h>
+ #include <linux/pci-acpi.h>
++#include <linux/pci-ecam.h>
+ 
+ /* Structure to hold entries from the MCFG table */
+ struct mcfg_entry {
+@@ -35,9 +36,18 @@ struct mcfg_entry {
+ /* List to save MCFG entries */
+ static LIST_HEAD(pci_mcfg_list);
+ 
+-phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
++int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
++		    struct pci_ecam_ops **ecam_ops)
+ {
++	struct pci_ecam_ops *ops = &pci_generic_ecam_ops;
++	struct resource *bus_res = &root->secondary;
++	u16 seg = root->segment;
+ 	struct mcfg_entry *e;
++	struct resource res;
++
++	/* Use address from _CBA if present, otherwise lookup MCFG */
++	if (root->mcfg_addr)
++		goto skip_lookup;
+ 
+ 	/*
+ 	 * We expect exact match, unless MCFG entry end bus covers more than
+@@ -45,10 +55,22 @@ phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+ 	 */
+ 	list_for_each_entry(e, &pci_mcfg_list, list) {
+ 		if (e->segment == seg && e->bus_start == bus_res->start &&
+-		    e->bus_end >= bus_res->end)
+-			return e->addr;
++		    e->bus_end >= bus_res->end) {
++			root->mcfg_addr = e->addr;
++		}
++
+ 	}
+ 
++	if (!root->mcfg_addr)
++		return -ENXIO;
++
++skip_lookup:
++	memset(&res, 0, sizeof(res));
++	res.start = root->mcfg_addr + (bus_res->start << 20);
++	res.end = res.start + (resource_size(bus_res) << 20) - 1;
++	res.flags = IORESOURCE_MEM;
++	*cfgres = res;
++	*ecam_ops = ops;
+ 	return 0;
+ }
+ 
+diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
+index 7d63a66..7a4e83a 100644
+--- a/include/linux/pci-acpi.h
++++ b/include/linux/pci-acpi.h
+@@ -24,7 +24,9 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
+ }
+ extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
+ 
+-extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
++struct pci_ecam_ops;
++extern int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
++			   struct pci_ecam_ops **ecam_ops);
+ 
+ static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+ {
+-- 
+2.9.3
+
+From 16c02d9cc0e67b48c343aecc4b5566e729a97683 Mon Sep 17 00:00:00 2001
+From: Tomasz Nowicki <tn@semihalf.com>
+Date: Fri, 9 Sep 2016 21:24:04 +0200
+Subject: [PATCH 2/6] PCI/ACPI: Check platform specific ECAM quirks
+
+Some platforms may not be fully compliant with generic set of PCI config
+accessors. For these cases we implement the way to overwrite CFG accessors
+set and configuration space range.
+
+In first place pci_mcfg_parse() saves machine's IDs and revision number
+(these come from MCFG header) in order to match against known quirk entries.
+Then the algorithm traverses available quirk list (static array),
+matches against <oem_id, oem_table_id, rev, domain, bus number range> and
+returns custom PCI config ops and/or CFG resource structure.
+
+When adding new quirk there are two possibilities:
+1. Override default pci_generic_ecam_ops ops but CFG resource comes from MCFG
+{ "OEM_ID", "OEM_TABLE_ID", <REV>, <DOMAIN>, <BUS_NR>, &foo_ops, MCFG_RES_EMPTY },
+2. Override default pci_generic_ecam_ops ops and CFG resource. For this case
+it is also allowed get CFG resource from quirk entry w/o having it in MCFG.
+{ "OEM_ID", "OEM_TABLE_ID", <REV>, <DOMAIN>, <BUS_NR>, &boo_ops,
+  DEFINE_RES_MEM(START, SIZE) },
+
+pci_generic_ecam_ops and MCFG entries will be used for platforms
+free from quirks.
+
+Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
+Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
+Signed-off-by: Christopher Covington <cov@codeaurora.org>
+---
+ drivers/acpi/pci_mcfg.c | 80 +++++++++++++++++++++++++++++++++++++++++++++----
+ 1 file changed, 74 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index ffcc651..2b8acc7 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -32,6 +32,59 @@ struct mcfg_entry {
+ 	u8			bus_start;
+ 	u8			bus_end;
+ };
++struct mcfg_fixup {
++	char oem_id[ACPI_OEM_ID_SIZE + 1];
++	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
++	u32 oem_revision;
++	u16 seg;
++	struct resource bus_range;
++	struct pci_ecam_ops *ops;
++	struct resource cfgres;
++};
++
++#define MCFG_DOM_ANY			(-1)
++#define MCFG_BUS_RANGE(start, end)	DEFINE_RES_NAMED((start),	\
++						((end) - (start) + 1),	\
++						NULL, IORESOURCE_BUS)
++#define MCFG_BUS_ANY		MCFG_BUS_RANGE(0x0, 0xff)
++#define MCFG_RES_EMPTY		DEFINE_RES_NAMED(0, 0, NULL, 0)
++
++static struct mcfg_fixup mcfg_quirks[] = {
++/*	{ OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
++};
++
++static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
++static char mcfg_oem_table_id[ACPI_OEM_TABLE_ID_SIZE];
++static u32 mcfg_oem_revision;
++
++static void pci_mcfg_match_quirks(struct acpi_pci_root *root,
++				  struct resource *cfgres,
++				  struct pci_ecam_ops **ecam_ops)
++{
++	struct mcfg_fixup *f;
++	int i;
++
++	/*
++	 * First match against PCI topology <domain:bus> then use OEM ID, OEM
++	 * table ID, and OEM revision from MCFG table standard header.
++	 */
++	for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
++		if (f->seg == root->segment &&
++		    resource_contains(&f->bus_range, &root->secondary) &&
++		    !memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
++		    !memcmp(f->oem_table_id, mcfg_oem_table_id,
++		            ACPI_OEM_TABLE_ID_SIZE) &&
++		    f->oem_revision == mcfg_oem_revision) {
++			if (f->cfgres.start)
++				*cfgres = f->cfgres;
++			if (f->ops)
++				*ecam_ops =  f->ops;
++			dev_info(&root->device->dev, "Applying PCI MCFG quirks for %s %s rev: %d\n",
++				 f->oem_id, f->oem_table_id, f->oem_revision);
++			return;
++		}
++	}
++}
+ 
+ /* List to save MCFG entries */
+ static LIST_HEAD(pci_mcfg_list);
+@@ -61,14 +114,24 @@ int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
+ 
+ 	}
+ 
+-	if (!root->mcfg_addr)
+-		return -ENXIO;
+-
+ skip_lookup:
+ 	memset(&res, 0, sizeof(res));
+-	res.start = root->mcfg_addr + (bus_res->start << 20);
+-	res.end = res.start + (resource_size(bus_res) << 20) - 1;
+-	res.flags = IORESOURCE_MEM;
++	if (root->mcfg_addr) {
++		res.start = root->mcfg_addr + (bus_res->start << 20);
++		res.end = res.start + (resource_size(bus_res) << 20) - 1;
++		res.flags = IORESOURCE_MEM;
++	}
++
++	/*
++	 * Let to override default ECAM ops and CFG resource range.
++	 * Also, this might even retrieve CFG resource range in case MCFG
++	 * does not have it. Invalid CFG start address means MCFG firmware bug
++	 * or we need another quirk in array.
++	 */
++	pci_mcfg_match_quirks(root, &res, &ops);
++	if (!res.start)
++		return -ENXIO;
++
+ 	*cfgres = res;
+ 	*ecam_ops = ops;
+ 	return 0;
+@@ -101,6 +164,11 @@ static __init int pci_mcfg_parse(struct acpi_table_header *header)
+ 		list_add(&e->list, &pci_mcfg_list);
+ 	}
+ 
++	/* Save MCFG IDs and revision for quirks matching */
++	memcpy(mcfg_oem_id, header->oem_id, ACPI_OEM_ID_SIZE);
++	memcpy(mcfg_oem_table_id, header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
++	mcfg_oem_revision = header->revision;
++
+ 	pr_info("MCFG table detected, %d entries\n", n);
+ 	return 0;
+ }
+-- 
+2.9.3
+
+From 2243ab64c12a873e47b72c8e636b40ed09c5f0d4 Mon Sep 17 00:00:00 2001
+From: Tomasz Nowicki <tn@semihalf.com>
+Date: Fri, 9 Sep 2016 21:24:05 +0200
+Subject: [PATCH 3/6] PCI: thunder-pem: Allow to probe PEM-specific register
+ range for ACPI case
+
+thunder-pem driver stands for being ACPI based PCI host controller.
+However, there is no standard way to describe its PEM-specific register
+ranges in ACPI tables. Thus we add thunder_pem_init() ACPI extension
+to obtain hardcoded addresses from static resource array.
+Although it is not pretty, it prevents from creating standard mechanism to
+handle similar cases in future.
+
+Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
+---
+ drivers/pci/host/pci-thunder-pem.c | 61 ++++++++++++++++++++++++++++++--------
+ 1 file changed, 48 insertions(+), 13 deletions(-)
+
+diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
+index 6abaf80..b048761 100644
+--- a/drivers/pci/host/pci-thunder-pem.c
++++ b/drivers/pci/host/pci-thunder-pem.c
+@@ -18,6 +18,7 @@
+ #include <linux/init.h>
+ #include <linux/of_address.h>
+ #include <linux/of_pci.h>
++#include <linux/pci-acpi.h>
+ #include <linux/pci-ecam.h>
+ #include <linux/platform_device.h>
+ 
+@@ -284,6 +285,40 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
+ 	return pci_generic_config_write(bus, devfn, where, size, val);
+ }
+ 
++#ifdef CONFIG_ACPI
++static struct resource thunder_pem_reg_res[] = {
++	[4] = DEFINE_RES_MEM(0x87e0c0000000UL, SZ_16M),
++	[5] = DEFINE_RES_MEM(0x87e0c1000000UL, SZ_16M),
++	[6] = DEFINE_RES_MEM(0x87e0c2000000UL, SZ_16M),
++	[7] = DEFINE_RES_MEM(0x87e0c3000000UL, SZ_16M),
++	[8] = DEFINE_RES_MEM(0x87e0c4000000UL, SZ_16M),
++	[9] = DEFINE_RES_MEM(0x87e0c5000000UL, SZ_16M),
++	[14] = DEFINE_RES_MEM(0x97e0c0000000UL, SZ_16M),
++	[15] = DEFINE_RES_MEM(0x97e0c1000000UL, SZ_16M),
++	[16] = DEFINE_RES_MEM(0x97e0c2000000UL, SZ_16M),
++	[17] = DEFINE_RES_MEM(0x97e0c3000000UL, SZ_16M),
++	[18] = DEFINE_RES_MEM(0x97e0c4000000UL, SZ_16M),
++	[19] = DEFINE_RES_MEM(0x97e0c5000000UL, SZ_16M),
++};
++
++static struct resource *thunder_pem_acpi_res(struct pci_config_window *cfg)
++{
++	struct acpi_device *adev = to_acpi_device(cfg->parent);
++	struct acpi_pci_root *root = acpi_driver_data(adev);
++
++	if ((root->segment >= 4 && root->segment <= 9) ||
++	    (root->segment >= 14 && root->segment <= 19))
++		return &thunder_pem_reg_res[root->segment];
++
++	return NULL;
++}
++#else
++static struct resource *thunder_pem_acpi_res(struct pci_config_window *cfg)
++{
++	return NULL;
++}
++#endif
++
+ static int thunder_pem_init(struct pci_config_window *cfg)
+ {
+ 	struct device *dev = cfg->parent;
+@@ -292,24 +327,24 @@ static int thunder_pem_init(struct pci_config_window *cfg)
+ 	struct thunder_pem_pci *pem_pci;
+ 	struct platform_device *pdev;
+ 
+-	/* Only OF support for now */
+-	if (!dev->of_node)
+-		return -EINVAL;
+-
+ 	pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
+ 	if (!pem_pci)
+ 		return -ENOMEM;
+ 
+-	pdev = to_platform_device(dev);
+-
+-	/*
+-	 * The second register range is the PEM bridge to the PCIe
+-	 * bus.  It has a different config access method than those
+-	 * devices behind the bridge.
+-	 */
+-	res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (acpi_disabled) {
++		pdev = to_platform_device(dev);
++
++		/*
++		 * The second register range is the PEM bridge to the PCIe
++		 * bus.  It has a different config access method than those
++		 * devices behind the bridge.
++		 */
++		res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	} else {
++		res_pem = thunder_pem_acpi_res(cfg);
++	}
+ 	if (!res_pem) {
+-		dev_err(dev, "missing \"reg[1]\"property\n");
++		dev_err(dev, "missing configuration region\n");
+ 		return -EINVAL;
+ 	}
+ 
+-- 
+2.9.3
+
+From 443d85d47ee00b3f0b6f39d470a11e7eb116817d Mon Sep 17 00:00:00 2001
+From: Tomasz Nowicki <tn@semihalf.com>
+Date: Fri, 9 Sep 2016 21:24:06 +0200
+Subject: [PATCH 4/6] PCI: thunder: Enable ACPI PCI controller for ThunderX
+ pass2.x silicon version
+
+ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
+compliant with ECAM standard. It uses non-standard configuration space
+accessors (see pci_thunder_pem_ops) and custom configuration space granulation
+(see bus_shift = 24). In order to access configuration space and
+probe PEM as ACPI based PCI host controller we need to add MCFG quirk
+infrastructure. This involves:
+1. Export PEM pci_thunder_pem_ops structure so it is visible to MCFG quirk
+   code.
+2. New quirk entries for each PEM segment. Each contains platform IDs,
+   mentioned pci_thunder_pem_ops and CFG resources.
+
+Quirk is considered for ThunderX silicon pass2.x only which is identified
+via MCFG revision 1.
+
+Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
+---
+ drivers/acpi/pci_mcfg.c            | 27 +++++++++++++++++++++++++++
+ drivers/pci/host/pci-thunder-pem.c |  2 +-
+ include/linux/pci-ecam.h           |  4 ++++
+ 3 files changed, 32 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index 2b8acc7..1f73d7b 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -51,6 +51,33 @@ struct mcfg_fixup {
+ 
+ static struct mcfg_fixup mcfg_quirks[] = {
+ /*	{ OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
++#ifdef CONFIG_PCI_HOST_THUNDER_PEM
++	/* SoC pass2.x */
++	{ "CAVIUM", "THUNDERX", 1, 4, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 5, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 6, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 7, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 8, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 9, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 14, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 15, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 16, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 17, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 18, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 1, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
++#endif
+ };
+ 
+ static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
+diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
+index b048761..d7c10cc 100644
+--- a/drivers/pci/host/pci-thunder-pem.c
++++ b/drivers/pci/host/pci-thunder-pem.c
+@@ -367,7 +367,7 @@ static int thunder_pem_init(struct pci_config_window *cfg)
+ 	return 0;
+ }
+ 
+-static struct pci_ecam_ops pci_thunder_pem_ops = {
++struct pci_ecam_ops pci_thunder_pem_ops = {
+ 	.bus_shift	= 24,
+ 	.init		= thunder_pem_init,
+ 	.pci_ops	= {
+diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
+index 7adad20..65505ea 100644
+--- a/include/linux/pci-ecam.h
++++ b/include/linux/pci-ecam.h
+@@ -58,6 +58,10 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
+ 			       int where);
+ /* default ECAM ops */
+ extern struct pci_ecam_ops pci_generic_ecam_ops;
++/* ECAM ops for known quirks */
++#ifdef CONFIG_PCI_HOST_THUNDER_PEM
++extern struct pci_ecam_ops pci_thunder_pem_ops;
++#endif
+ 
+ #ifdef CONFIG_PCI_HOST_GENERIC
+ /* for DT-based PCI controllers that support ECAM */
+-- 
+2.9.3
+
+From 6eca99cc392a11bb07b9ef88bca71a85f8bbe273 Mon Sep 17 00:00:00 2001
+From: Tomasz Nowicki <tn@semihalf.com>
+Date: Fri, 9 Sep 2016 21:24:07 +0200
+Subject: [PATCH 5/6] PCI: thunder: Enable ACPI PCI controller for ThunderX
+ pass1.x silicon version
+
+ThunderX pass1.x requires to emulate the EA headers for on-chip devices
+hence it has to use custom pci_thunder_ecam_ops for accessing PCI config
+space (pci-thuner-ecam.c). Add new entries to MCFG quirk array where they
+can be applied while probing ACPI based PCI host controller.
+
+ThunderX pass1.x is using the same way for accessing off-chip devices
+(so-called PEM) as silicon pass-2.x so we need to add PEM quirk
+entries too.
+
+Quirk is considered for ThunderX silicon pass1.x only which is identified
+via MCFG revision 2.
+
+Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
+---
+ drivers/acpi/pci_mcfg.c             | 45 +++++++++++++++++++++++++++++++++++++
+ drivers/pci/host/pci-thunder-ecam.c |  2 +-
+ include/linux/pci-ecam.h            |  3 +++
+ 3 files changed, 49 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index 1f73d7b..eb14f74 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -77,6 +77,51 @@ static struct mcfg_fixup mcfg_quirks[] = {
+ 	  DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
+ 	{ "CAVIUM", "THUNDERX", 1, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+ 	  DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
++
++	/* SoC pass1.x */
++	{ "CAVIUM", "THUNDERX", 2, 4, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 5, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 6, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 7, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 8, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 9, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 14, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 15, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 16, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 17, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 18, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
++	{ "CAVIUM", "THUNDERX", 2, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
++	  DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
++#endif
++#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
++	/* SoC pass1.x */
++	{ "CAVIUM", "THUNDERX", 2, 0, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
++	{ "CAVIUM", "THUNDERX", 2, 1, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
++	{ "CAVIUM", "THUNDERX", 2, 2, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
++	{ "CAVIUM", "THUNDERX", 2, 3, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
++	{ "CAVIUM", "THUNDERX", 2, 10, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
++	{ "CAVIUM", "THUNDERX", 2, 11, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
++	{ "CAVIUM", "THUNDERX", 2, 12, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
++	{ "CAVIUM", "THUNDERX", 2, 13, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
++	  MCFG_RES_EMPTY},
+ #endif
+ };
+ 
+diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c
+index d50a3dc..b6c17e2 100644
+--- a/drivers/pci/host/pci-thunder-ecam.c
++++ b/drivers/pci/host/pci-thunder-ecam.c
+@@ -346,7 +346,7 @@ static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn,
+ 	return pci_generic_config_write(bus, devfn, where, size, val);
+ }
+ 
+-static struct pci_ecam_ops pci_thunder_ecam_ops = {
++struct pci_ecam_ops pci_thunder_ecam_ops = {
+ 	.bus_shift	= 20,
+ 	.pci_ops	= {
+ 		.map_bus        = pci_ecam_map_bus,
+diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
+index 65505ea..35f0e81 100644
+--- a/include/linux/pci-ecam.h
++++ b/include/linux/pci-ecam.h
+@@ -62,6 +62,9 @@ extern struct pci_ecam_ops pci_generic_ecam_ops;
+ #ifdef CONFIG_PCI_HOST_THUNDER_PEM
+ extern struct pci_ecam_ops pci_thunder_pem_ops;
+ #endif
++#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
++extern struct pci_ecam_ops pci_thunder_ecam_ops;
++#endif
+ 
+ #ifdef CONFIG_PCI_HOST_GENERIC
+ /* for DT-based PCI controllers that support ECAM */
+-- 
+2.9.3
+
+From 3080ac5bb527155ccdf8490ce221b1c6ad01f502 Mon Sep 17 00:00:00 2001
+From: Duc Dang <dhdang@apm.com>
+Date: Sat, 17 Sep 2016 07:24:38 -0700
+Subject: [PATCH 6/6] PCI/ACPI: xgene: Add ECAM quirk for X-Gene PCIe
+ controller
+
+PCIe controller in X-Gene SoCs is not ECAM compliant: software
+needs to configure additional concontroller register to address
+device at bus:dev:function.
+
+This patch depends on "ECAM quirks handling for ARM64 platforms"
+series (http://www.spinics.net/lists/arm-kernel/msg530692.html)
+to address the limitation above for X-Gene PCIe controller.
+
+The quirk will only be applied for X-Gene PCIe MCFG table with
+OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs).
+
+Signed-off-by: Duc Dang <dhdang@apm.com>
+---
+ drivers/acpi/pci_mcfg.c           |  32 +++++
+ drivers/pci/host/Makefile         |   2 +-
+ drivers/pci/host/pci-xgene-ecam.c | 280 ++++++++++++++++++++++++++++++++++++++
+ include/linux/pci-ecam.h          |   5 +
+ 4 files changed, 318 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/pci/host/pci-xgene-ecam.c
+
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index eb14f74..635ab24 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -123,6 +123,38 @@ static struct mcfg_fixup mcfg_quirks[] = {
+ 	{ "CAVIUM", "THUNDERX", 2, 13, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
+ 	  MCFG_RES_EMPTY},
+ #endif
++#ifdef CONFIG_PCI_XGENE
++	{"APM   ", "XGENE   ", 1, 0, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 1, 1, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 1, 2, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 1, 3, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 1, 4, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 2, 0, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 2, 1, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 2, 2, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 2, 3, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 2, 4, MCFG_BUS_ANY,
++		&xgene_v1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 3, 0, MCFG_BUS_ANY,
++		&xgene_v2_1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 3, 1, MCFG_BUS_ANY,
++		&xgene_v2_1_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 4, 0, MCFG_BUS_ANY,
++		&xgene_v2_2_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 4, 1, MCFG_BUS_ANY,
++		&xgene_v2_2_pcie_ecam_ops, MCFG_RES_EMPTY},
++	{"APM   ", "XGENE   ", 4, 2, MCFG_BUS_ANY,
++		&xgene_v2_2_pcie_ecam_ops, MCFG_RES_EMPTY},
++#endif
+ };
+ 
+ static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
+diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
+index 8843410..af4f505 100644
+--- a/drivers/pci/host/Makefile
++++ b/drivers/pci/host/Makefile
+@@ -15,7 +15,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
+ obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
+ obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
+ obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
+-obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
++obj-$(CONFIG_PCI_XGENE) += pci-xgene.o pci-xgene-ecam.o
+ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
+ obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
+diff --git a/drivers/pci/host/pci-xgene-ecam.c b/drivers/pci/host/pci-xgene-ecam.c
+new file mode 100644
+index 0000000..b66a04f
+--- /dev/null
++++ b/drivers/pci/host/pci-xgene-ecam.c
+@@ -0,0 +1,280 @@
++/*
++ * APM X-Gene PCIe ECAM fixup driver
++ *
++ * Copyright (c) 2016, Applied Micro Circuits Corporation
++ * Author:
++ *	Duc Dang <dhdang@apm.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_pci.h>
++#include <linux/pci-acpi.h>
++#include <linux/platform_device.h>
++#include <linux/pci-ecam.h>
++
++#ifdef CONFIG_ACPI
++#define RTDID			0x160
++#define ROOT_CAP_AND_CTRL	0x5C
++
++/* PCIe IP version */
++#define XGENE_PCIE_IP_VER_UNKN	0
++#define XGENE_PCIE_IP_VER_1	1
++#define XGENE_PCIE_IP_VER_2	2
++
++#define XGENE_CSR_LENGTH	0x10000
++
++struct xgene_pcie_acpi_root {
++	void __iomem *csr_base;
++	u32 version;
++};
++
++static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
++{
++	struct xgene_pcie_acpi_root *xgene_root;
++	struct device *dev = cfg->parent;
++	u32 csr_base;
++
++	xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
++	if (!xgene_root)
++		return -ENOMEM;
++
++	switch (cfg->res.start) {
++	case 0xE0D0000000ULL:
++		csr_base = 0x1F2B0000;
++		break;
++	case 0xD0D0000000ULL:
++		csr_base = 0x1F2C0000;
++		break;
++	case 0x90D0000000ULL:
++		csr_base = 0x1F2D0000;
++		break;
++	case 0xA0D0000000ULL:
++		csr_base = 0x1F500000;
++		break;
++	case 0xC0D0000000ULL:
++		csr_base = 0x1F510000;
++		break;
++	default:
++		return -ENODEV;
++	}
++
++	xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
++	if (!xgene_root->csr_base) {
++		kfree(xgene_root);
++		return -ENODEV;
++	}
++
++	xgene_root->version = XGENE_PCIE_IP_VER_1;
++
++	cfg->priv = xgene_root;
++
++	return 0;
++}
++
++static int xgene_v2_1_pcie_ecam_init(struct pci_config_window *cfg)
++{
++	struct xgene_pcie_acpi_root *xgene_root;
++	struct device *dev = cfg->parent;
++	resource_size_t csr_base;
++
++	xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
++	if (!xgene_root)
++		return -ENOMEM;
++
++	switch (cfg->res.start) {
++	case 0xC0D0000000ULL:
++		csr_base = 0x1F2B0000;
++		break;
++	case 0xA0D0000000ULL:
++		csr_base = 0x1F2C0000;
++		break;
++	default:
++		return -ENODEV;
++	}
++
++	xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
++	if (!xgene_root->csr_base) {
++		kfree(xgene_root);
++		return -ENODEV;
++	}
++
++	xgene_root->version = XGENE_PCIE_IP_VER_2;
++
++	cfg->priv = xgene_root;
++
++	return 0;
++}
++
++static int xgene_v2_2_pcie_ecam_init(struct pci_config_window *cfg)
++{
++	struct xgene_pcie_acpi_root *xgene_root;
++	struct device *dev = cfg->parent;
++	resource_size_t csr_base;
++
++	xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
++	if (!xgene_root)
++		return -ENOMEM;
++
++	switch (cfg->res.start) {
++	case 0xE0D0000000ULL:
++		csr_base = 0x1F2B0000;
++		break;
++	case 0xA0D0000000ULL:
++		csr_base = 0x1F500000;
++		break;
++	case 0x90D0000000ULL:
++		csr_base = 0x1F2D0000;
++		break;
++	default:
++		return -ENODEV;
++	}
++
++	xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
++	if (!xgene_root->csr_base) {
++		kfree(xgene_root);
++		return -ENODEV;
++	}
++
++	xgene_root->version = XGENE_PCIE_IP_VER_2;
++
++	cfg->priv = xgene_root;
++
++	return 0;
++}
++/*
++ * For Configuration request, RTDID register is used as Bus Number,
++ * Device Number and Function number of the header fields.
++ */
++static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
++{
++	struct pci_config_window *cfg = bus->sysdata;
++	struct xgene_pcie_acpi_root *port = cfg->priv;
++	unsigned int b, d, f;
++	u32 rtdid_val = 0;
++
++	b = bus->number;
++	d = PCI_SLOT(devfn);
++	f = PCI_FUNC(devfn);
++
++	if (!pci_is_root_bus(bus))
++		rtdid_val = (b << 8) | (d << 3) | f;
++
++	writel(rtdid_val, port->csr_base + RTDID);
++	/* read the register back to ensure flush */
++	readl(port->csr_base + RTDID);
++}
++
++/*
++ * X-Gene PCIe port uses BAR0-BAR1 of RC's configuration space as
++ * the translation from PCI bus to native BUS.  Entire DDR region
++ * is mapped into PCIe space using these registers, so it can be
++ * reached by DMA from EP devices.  The BAR0/1 of bridge should be
++ * hidden during enumeration to avoid the sizing and resource allocation
++ * by PCIe core.
++ */
++static bool xgene_pcie_hide_rc_bars(struct pci_bus *bus, int offset)
++{
++	if (pci_is_root_bus(bus) && ((offset == PCI_BASE_ADDRESS_0) ||
++				     (offset == PCI_BASE_ADDRESS_1)))
++		return true;
++
++	return false;
++}
++
++void __iomem *xgene_pcie_ecam_map_bus(struct pci_bus *bus,
++				      unsigned int devfn, int where)
++{
++	struct pci_config_window *cfg = bus->sysdata;
++	unsigned int busn = bus->number;
++	void __iomem *base;
++
++	if (busn < cfg->busr.start || busn > cfg->busr.end)
++		return NULL;
++
++	if ((pci_is_root_bus(bus) && devfn != 0) ||
++	    xgene_pcie_hide_rc_bars(bus, where))
++		return NULL;
++
++	xgene_pcie_set_rtdid_reg(bus, devfn);
++
++	if (busn > cfg->busr.start)
++		base = cfg->win + (1 << cfg->ops->bus_shift);
++	else
++		base = cfg->win;
++
++	return base + where;
++}
++
++static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
++				    int where, int size, u32 *val)
++{
++	struct pci_config_window *cfg = bus->sysdata;
++	struct xgene_pcie_acpi_root *port = cfg->priv;
++
++	if (pci_generic_config_read32(bus, devfn, where & ~0x3, 4, val) !=
++	    PCIBIOS_SUCCESSFUL)
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	/*
++	* The v1 controller has a bug in its Configuration Request
++	* Retry Status (CRS) logic: when CRS is enabled and we read the
++	* Vendor and Device ID of a non-existent device, the controller
++	* fabricates return data of 0xFFFF0001 ("device exists but is not
++	* ready") instead of 0xFFFFFFFF ("device does not exist").  This
++	* causes the PCI core to retry the read until it times out.
++	* Avoid this by not claiming to support CRS.
++	*/
++	if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
++	    ((where & ~0x3) == ROOT_CAP_AND_CTRL))
++		*val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
++
++	if (size <= 2)
++		*val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ecam_ops xgene_v1_pcie_ecam_ops = {
++	.bus_shift	= 16,
++	.init		= xgene_v1_pcie_ecam_init,
++	.pci_ops	= {
++		.map_bus	= xgene_pcie_ecam_map_bus,
++		.read		= xgene_pcie_config_read32,
++		.write		= pci_generic_config_write,
++	}
++};
++
++struct pci_ecam_ops xgene_v2_1_pcie_ecam_ops = {
++	.bus_shift	= 16,
++	.init		= xgene_v2_1_pcie_ecam_init,
++	.pci_ops	= {
++		.map_bus	= xgene_pcie_ecam_map_bus,
++		.read		= xgene_pcie_config_read32,
++		.write		= pci_generic_config_write,
++	}
++};
++
++struct pci_ecam_ops xgene_v2_2_pcie_ecam_ops = {
++	.bus_shift	= 16,
++	.init		= xgene_v2_2_pcie_ecam_init,
++	.pci_ops	= {
++		.map_bus	= xgene_pcie_ecam_map_bus,
++		.read		= xgene_pcie_config_read32,
++		.write		= pci_generic_config_write,
++	}
++};
++#endif
+diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
+index 35f0e81..40da3e7 100644
+--- a/include/linux/pci-ecam.h
++++ b/include/linux/pci-ecam.h
+@@ -65,6 +65,11 @@ extern struct pci_ecam_ops pci_thunder_pem_ops;
+ #ifdef CONFIG_PCI_HOST_THUNDER_ECAM
+ extern struct pci_ecam_ops pci_thunder_ecam_ops;
+ #endif
++#ifdef CONFIG_PCI_XGENE
++extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops;
++extern struct pci_ecam_ops xgene_v2_1_pcie_ecam_ops;
++extern struct pci_ecam_ops xgene_v2_2_pcie_ecam_ops;
++#endif
+ 
+ #ifdef CONFIG_PCI_HOST_GENERIC
+ /* for DT-based PCI controllers that support ECAM */
+-- 
+2.9.3
+

asus-wmi-Restrict-debugfs-interface-when-module-load.patch

@@ -0,0 +1,54 @@
+From 32f701d40657cc3c982b8cba4bf73452ccdd6697 Mon Sep 17 00:00:00 2001
+From: Matthew Garrett <matthew.garrett@nebula.com>
+Date: Fri, 9 Mar 2012 08:46:50 -0500
+Subject: [PATCH 05/20] asus-wmi: Restrict debugfs interface when module
+ loading is restricted
+
+We have no way of validating what all of the Asus WMI methods do on a
+given machine, and there's a risk that some will allow hardware state to
+be manipulated in such a way that arbitrary code can be executed in the
+kernel, circumventing module loading restrictions. Prevent that if any of
+these features are enabled.
+
+Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
+---
+ drivers/platform/x86/asus-wmi.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
+index efbc3f0c592b..071171be4b7f 100644
+--- a/drivers/platform/x86/asus-wmi.c
++++ b/drivers/platform/x86/asus-wmi.c
+@@ -1868,6 +1868,9 @@ static int show_dsts(struct seq_file *m, void *data)
+ 	int err;
+ 	u32 retval = -1;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	err = asus_wmi_get_devstate(asus, asus->debug.dev_id, &retval);
+ 
+ 	if (err < 0)
+@@ -1884,6 +1887,9 @@ static int show_devs(struct seq_file *m, void *data)
+ 	int err;
+ 	u32 retval = -1;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	err = asus_wmi_set_devstate(asus->debug.dev_id, asus->debug.ctrl_param,
+ 				    &retval);
+ 
+@@ -1908,6 +1914,9 @@ static int show_call(struct seq_file *m, void *data)
+ 	union acpi_object *obj;
+ 	acpi_status status;
+ 
++	if (secure_modules())
++		return -EPERM;
++
+ 	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID,
+ 				     1, asus->debug.method_id,
+ 				     &input, &output);
+-- 
+2.4.3
+

ath9k-rx-dma-stop-check.patch

@@ -0,0 +1,38 @@
+From: "kernel-team@fedoraproject.org" <kernel-team@fedoraproject.org>
+Date: Wed, 6 Feb 2013 09:57:47 -0500
+Subject: [PATCH] ath9k: rx dma stop check
+
+---
+ drivers/net/wireless/ath/ath9k/mac.c | 12 +++++++++++-
+ 1 file changed, 11 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
+index bba85d1a6cd1..ebbee8f17130 100644
+--- a/drivers/net/wireless/ath/ath9k/mac.c
++++ b/drivers/net/wireless/ath/ath9k/mac.c
+@@ -693,7 +693,7 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
+ {
+ #define AH_RX_STOP_DMA_TIMEOUT 10000   /* usec */
+ 	struct ath_common *common = ath9k_hw_common(ah);
+-	u32 mac_status, last_mac_status = 0;
++	u32 mac_status = 0, last_mac_status = 0;
+ 	int i;
+ 
+ 	/* Enable access to the DMA observation bus */
+@@ -723,6 +723,16 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
+ 	}
+ 
+ 	if (i == 0) {
++		if (!AR_SREV_9300_20_OR_LATER(ah) &&
++		    (mac_status & 0x700) == 0) {
++			/*
++			 * DMA is idle but the MAC is still stuck
++			 * processing events
++			 */
++			*reset = true;
++			return true;
++		}
++
+ 		ath_err(common,
+ 			"DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x DMADBG_7=0x%08x\n",
+ 			AH_RX_STOP_DMA_TIMEOUT / 1000,

bcm2837-initial-support.patch

@@ -0,0 +1,153 @@
+From a2858804c7f5f4585b718543236b7ba3b3ec813a Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Mon, 29 Aug 2016 09:14:15 +0100
+Subject: [PATCH] ARM: bcm283x: Add devicetree for the Raspberry Pi 3.
+
+For now this doesn't support the new hardware present on the Pi 3 (BT,
+wifi, GPIO expander).
+
+Rebased to the patch that went upstream for ARM64
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm/boot/dts/Makefile            |  3 +-
+ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 30 ++++++++++++++
+ arch/arm/boot/dts/bcm2837.dtsi        | 76 +++++++++++++++++++++++++++++++++++
+ 3 files changed, 108 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+ create mode 100644 arch/arm/boot/dts/bcm2837.dtsi
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index faacd52..ec41888 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -69,7 +69,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ 	bcm2835-rpi-b-rev2.dtb \
+ 	bcm2835-rpi-b-plus.dtb \
+ 	bcm2835-rpi-a-plus.dtb \
+-	bcm2836-rpi-2-b.dtb
++	bcm2836-rpi-2-b.dtb \
++	bcm2837-rpi-3-b.dtb
+ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm4708-asus-rt-ac56u.dtb \
+ 	bcm4708-asus-rt-ac68u.dtb \
+diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+new file mode 100644
+index 0000000..7841b72
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+@@ -0,0 +1,30 @@
++/dts-v1/;
++#include "bcm2837.dtsi"
++#include "bcm2835-rpi.dtsi"
++#include "bcm283x-rpi-smsc9514.dtsi"
++
++/ {
++	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
++	model = "Raspberry Pi 3 Model B";
++
++	memory {
++		reg = <0 0x40000000>;
++	};
++
++	leds {
++		act {
++			gpios = <&gpio 47 0>;
++		};
++
++		pwr {
++			label = "PWR";
++			gpios = <&gpio 35 0>;
++			default-state = "keep";
++			linux,default-trigger = "default-on";
++		};
++	};
++};
++
++&uart1 {
++	status = "okay";
++};
+diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
+new file mode 100644
+index 0000000..8216bbb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2837.dtsi
+@@ -0,0 +1,76 @@
++#include "bcm283x.dtsi"
++
++/ {
++	compatible = "brcm,bcm2836";
++
++	soc {
++		ranges = <0x7e000000 0x3f000000 0x1000000>,
++			 <0x40000000 0x40000000 0x00001000>;
++		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
++
++		local_intc: local_intc {
++			compatible = "brcm,bcm2836-l1-intc";
++			reg = <0x40000000 0x100>;
++			interrupt-controller;
++			#interrupt-cells = <1>;
++			interrupt-parent = <&local_intc>;
++		};
++	};
++
++	timer {
++		compatible = "arm,armv7-timer";
++		interrupt-parent = <&local_intc>;
++		interrupts = <0>, // PHYS_SECURE_PPI
++			     <1>, // PHYS_NONSECURE_PPI
++			     <3>, // VIRT_PPI
++			     <2>; // HYP_PPI
++		always-on;
++	};
++
++	cpus: cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		cpu0: cpu@0 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a53";
++			reg = <0>;
++			enable-method = "spin-table";
++			cpu-release-addr = <0x0 0x000000d8>;
++		};
++
++		cpu1: cpu@1 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a53";
++			reg = <1>;
++			enable-method = "spin-table";
++			cpu-release-addr = <0x0 0x000000e0>;
++		};
++
++		cpu2: cpu@2 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a53";
++			reg = <2>;
++			enable-method = "spin-table";
++			cpu-release-addr = <0x0 0x000000e8>;
++		};
++
++		cpu3: cpu@3 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a53";
++			reg = <3>;
++			enable-method = "spin-table";
++			cpu-release-addr = <0x0 0x000000f0>;
++		};
++	};
++};
++
++/* Make the BCM2835-style global interrupt controller be a child of the
++ * CPU-local interrupt controller.
++ */
++&intc {
++	compatible = "brcm,bcm2836-armctrl-ic";
++	reg = <0x7e00b200 0x200>;
++	interrupt-parent = <&local_intc>;
++	interrupts = <8>;
++};
+-- 
+2.9.3

bcm283x-vc4-fixes.patch

@@ -0,0 +1,682 @@
+From 9db79f3a51c97e0cfcde1b25299e8db9ee3d64ab Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Wed, 14 Sep 2016 19:21:29 +0100
+Subject: [PATCH 1/4] drm/vc4: Fall back to using an EDID probe in the absence
+ of a GPIO.
+
+On Pi0/1/2, we use an external GPIO line for hotplug detection, since
+the HDMI_HOTPLUG register isn't connected to anything.  However, with
+the Pi3 the HPD GPIO line has moved off to a GPIO expander that will
+be tricky to get to (the firmware is constantly polling the expander
+using i2c0, so we'll need to coordinate with it).
+
+As a stop-gap, if we don't have a GPIO line, use an EDID probe to
+detect connection.  Fixes HDMI display on the pi3.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/gpu/drm/vc4/vc4_hdmi.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
+index 4452f36..5adc0c7 100644
+--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
+@@ -174,6 +174,9 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
+ 			return connector_status_disconnected;
+ 	}
+ 
++	if (drm_probe_ddc(vc4->hdmi->ddc))
++		return connector_status_connected;
++
+ 	if (HDMI_READ(VC4_HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED)
+ 		return connector_status_connected;
+ 	else
+-- 
+2.9.3
+
+From 7b4c39f34fbbdfe0cd0e626686ee01ab96601598 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Fri, 16 Sep 2016 10:59:45 +0100
+Subject: [PATCH 2/4] drm/vc4: Enable limited range RGB output on HDMI with CEA
+ modes.
+
+Fixes broken grayscale ramps on many HDMI monitors, where large areas
+at the ends of the ramp would all appear as black or white.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/gpu/drm/vc4/vc4_hdmi.c | 31 +++++++++++++++++++++++++++++--
+ drivers/gpu/drm/vc4/vc4_regs.h |  9 ++++++++-
+ 2 files changed, 37 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
+index 5adc0c7..5df4e74 100644
+--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
+@@ -276,6 +276,7 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ 				      struct drm_display_mode *unadjusted_mode,
+ 				      struct drm_display_mode *mode)
+ {
++	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
+ 	struct drm_device *dev = encoder->dev;
+ 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+ 	bool debug_dump_regs = false;
+@@ -291,6 +292,7 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ 	u32 vertb = (VC4_SET_FIELD(0, VC4_HDMI_VERTB_VSPO) |
+ 		     VC4_SET_FIELD(mode->vtotal - mode->vsync_end,
+ 				   VC4_HDMI_VERTB_VBP));
++	u32 csc_ctl;
+ 
+ 	if (debug_dump_regs) {
+ 		DRM_INFO("HDMI regs before:\n");
+@@ -329,9 +331,34 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ 		 (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
+ 		 (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
+ 
++	csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
++				VC4_HD_CSC_CTL_ORDER);
++
++	if (vc4_encoder->hdmi_monitor && drm_match_cea_mode(mode) > 1) {
++		/* CEA VICs other than #1 requre limited range RGB
++		 * output.  Apply a colorspace conversion to squash
++		 * 0-255 down to 16-235.  The matrix here is:
++		 *
++		 * [ 0      0      0.8594 16]
++		 * [ 0      0.8594 0      16]
++		 * [ 0.8594 0      0      16]
++		 * [ 0      0      0       1]
++		 */
++		csc_ctl |= VC4_HD_CSC_CTL_ENABLE;
++		csc_ctl |= VC4_HD_CSC_CTL_RGB2YCC;
++		csc_ctl |= VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
++					 VC4_HD_CSC_CTL_MODE);
++
++		HD_WRITE(VC4_HD_CSC_12_11, (0x000 << 16) | 0x000);
++		HD_WRITE(VC4_HD_CSC_14_13, (0x100 << 16) | 0x6e0);
++		HD_WRITE(VC4_HD_CSC_22_21, (0x6e0 << 16) | 0x000);
++		HD_WRITE(VC4_HD_CSC_24_23, (0x100 << 16) | 0x000);
++		HD_WRITE(VC4_HD_CSC_32_31, (0x000 << 16) | 0x6e0);
++		HD_WRITE(VC4_HD_CSC_34_33, (0x100 << 16) | 0x000);
++	}
++
+ 	/* The RGB order applies even when CSC is disabled. */
+-	HD_WRITE(VC4_HD_CSC_CTL, VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
+-					       VC4_HD_CSC_CTL_ORDER));
++	HD_WRITE(VC4_HD_CSC_CTL, csc_ctl);
+ 
+ 	HDMI_WRITE(VC4_HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
+ 
+diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
+index 160942a..9ecd6ff 100644
+--- a/drivers/gpu/drm/vc4/vc4_regs.h
++++ b/drivers/gpu/drm/vc4/vc4_regs.h
+@@ -528,10 +528,17 @@
+ # define VC4_HD_CSC_CTL_MODE_SHIFT		2
+ # define VC4_HD_CSC_CTL_MODE_RGB_TO_SD_YPRPB	0
+ # define VC4_HD_CSC_CTL_MODE_RGB_TO_HD_YPRPB	1
+-# define VC4_HD_CSC_CTL_MODE_CUSTOM		2
++# define VC4_HD_CSC_CTL_MODE_CUSTOM		3
+ # define VC4_HD_CSC_CTL_RGB2YCC			BIT(1)
+ # define VC4_HD_CSC_CTL_ENABLE			BIT(0)
+ 
++#define VC4_HD_CSC_12_11			0x044
++#define VC4_HD_CSC_14_13			0x048
++#define VC4_HD_CSC_22_21			0x04c
++#define VC4_HD_CSC_24_23			0x050
++#define VC4_HD_CSC_32_31			0x054
++#define VC4_HD_CSC_34_33			0x058
++
+ #define VC4_HD_FRAME_COUNT			0x068
+ 
+ /* HVS display list information. */
+-- 
+2.9.3
+
+From f379f5432e4b74e3d1d894ce2fefbe1b8a3c24fd Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Wed, 28 Sep 2016 19:20:44 -0700
+Subject: [PATCH 4/4] drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL
+ changes.
+
+Fixes occasional debug spew at boot when connected directly through
+HDMI, and probably confusing the HDMI state machine when we go trying
+to poke registers for the enable sequence too soon.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/gpu/drm/vc4/vc4_hdmi.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
+index 5df4e74..9a6883d 100644
+--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
+@@ -399,7 +399,7 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+ 			   VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI);
+ 
+ 		ret = wait_for(HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) &
+-			       VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE, 1);
++			       VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE, 1000);
+ 		WARN_ONCE(ret, "Timeout waiting for "
+ 			  "VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE\n");
+ 	} else {
+@@ -411,7 +411,7 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+ 			   ~VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI);
+ 
+ 		ret = wait_for(!(HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) &
+-				 VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE), 1);
++				 VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE), 1000);
+ 		WARN_ONCE(ret, "Timeout waiting for "
+ 			  "!VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE\n");
+ 	}
+-- 
+2.9.3
+
+From bd712d14886c37eb804036b2ac3036df79d33476 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Thu, 29 Sep 2016 15:34:43 -0700
+Subject: [PATCH] drm/vc4: Set up the AVI and SPD infoframes.
+
+Fixes a purple bar on the left side of the screen with my Dell
+2408WFP.  It will also be required for supporting the double-clocked
+video modes.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/gpu/drm/vc4/vc4_hdmi.c | 136 +++++++++++++++++++++++++++++++++++++++--
+ drivers/gpu/drm/vc4/vc4_regs.h |   5 ++
+ 2 files changed, 136 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
+index 9a6883d..f722334 100644
+--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
+@@ -62,6 +62,8 @@ struct vc4_hdmi {
+ struct vc4_hdmi_encoder {
+ 	struct vc4_encoder base;
+ 	bool hdmi_monitor;
++	bool limited_rgb_range;
++	bool rgb_range_selectable;
+ };
+ 
+ static inline struct vc4_hdmi_encoder *
+@@ -205,6 +207,12 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
+ 		return -ENODEV;
+ 
+ 	vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid);
++
++	if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) {
++		vc4_encoder->rgb_range_selectable =
++			drm_rgb_quant_range_selectable(edid);
++	}
++
+ 	drm_mode_connector_update_edid_property(connector, edid);
+ 	ret = drm_add_edid_modes(connector, edid);
+ 
+@@ -272,6 +280,117 @@ static const struct drm_encoder_funcs vc4_hdmi_encoder_funcs = {
+ 	.destroy = vc4_hdmi_encoder_destroy,
+ };
+ 
++static int vc4_hdmi_stop_packet(struct drm_encoder *encoder,
++				enum hdmi_infoframe_type type)
++{
++	struct drm_device *dev = encoder->dev;
++	struct vc4_dev *vc4 = to_vc4_dev(dev);
++	u32 packet_id = type - 0x80;
++
++	HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG,
++		   HDMI_READ(VC4_HDMI_RAM_PACKET_CONFIG) & ~BIT(packet_id));
++
++	return wait_for(!(HDMI_READ(VC4_HDMI_RAM_PACKET_STATUS) &
++			  BIT(packet_id)), 100);
++}
++
++static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,
++				     union hdmi_infoframe *frame)
++{
++	struct drm_device *dev = encoder->dev;
++	struct vc4_dev *vc4 = to_vc4_dev(dev);
++	u32 packet_id = frame->any.type - 0x80;
++	u32 packet_reg = VC4_HDMI_GCP_0 + VC4_HDMI_PACKET_STRIDE * packet_id;
++	uint8_t buffer[VC4_HDMI_PACKET_STRIDE];
++	ssize_t len, i;
++	int ret;
++
++	WARN_ONCE(!(HDMI_READ(VC4_HDMI_RAM_PACKET_CONFIG) &
++		    VC4_HDMI_RAM_PACKET_ENABLE),
++		  "Packet RAM has to be on to store the packet.");
++
++	len = hdmi_infoframe_pack(frame, buffer, sizeof(buffer));
++	if (len < 0)
++		return;
++
++	ret = vc4_hdmi_stop_packet(encoder, frame->any.type);
++	if (ret) {
++		DRM_ERROR("Failed to wait for infoframe to go idle: %d\n", ret);
++		return;
++	}
++
++	for (i = 0; i < len; i += 7) {
++		HDMI_WRITE(packet_reg,
++			   buffer[i + 0] << 0 |
++			   buffer[i + 1] << 8 |
++			   buffer[i + 2] << 16);
++		packet_reg += 4;
++
++		HDMI_WRITE(packet_reg,
++			   buffer[i + 3] << 0 |
++			   buffer[i + 4] << 8 |
++			   buffer[i + 5] << 16 |
++			   buffer[i + 6] << 24);
++		packet_reg += 4;
++	}
++
++	HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG,
++		   HDMI_READ(VC4_HDMI_RAM_PACKET_CONFIG) | BIT(packet_id));
++	ret = wait_for((HDMI_READ(VC4_HDMI_RAM_PACKET_STATUS) &
++			BIT(packet_id)), 100);
++	if (ret)
++		DRM_ERROR("Failed to wait for infoframe to start: %d\n", ret);
++}
++
++static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
++{
++	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
++	struct drm_crtc *crtc = encoder->crtc;
++	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
++	union hdmi_infoframe frame;
++	int ret;
++
++	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode);
++	if (ret < 0) {
++		DRM_ERROR("couldn't fill AVI infoframe\n");
++		return;
++	}
++
++	if (vc4_encoder->rgb_range_selectable) {
++		if (vc4_encoder->limited_rgb_range) {
++			frame.avi.quantization_range =
++				HDMI_QUANTIZATION_RANGE_LIMITED;
++		} else {
++			frame.avi.quantization_range =
++				HDMI_QUANTIZATION_RANGE_FULL;
++		}
++	}
++
++	vc4_hdmi_write_infoframe(encoder, &frame);
++}
++
++static void vc4_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
++{
++	union hdmi_infoframe frame;
++	int ret;
++
++	ret = hdmi_spd_infoframe_init(&frame.spd, "Broadcom", "Videocore");
++	if (ret < 0) {
++		DRM_ERROR("couldn't fill SPD infoframe\n");
++		return;
++	}
++
++	frame.spd.sdi = HDMI_SPD_SDI_PC;
++
++	vc4_hdmi_write_infoframe(encoder, &frame);
++}
++
++static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder)
++{
++	vc4_hdmi_set_avi_infoframe(encoder);
++	vc4_hdmi_set_spd_infoframe(encoder);
++}
++
+ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ 				      struct drm_display_mode *unadjusted_mode,
+ 				      struct drm_display_mode *mode)
+@@ -336,8 +455,9 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ 
+ 	if (vc4_encoder->hdmi_monitor && drm_match_cea_mode(mode) > 1) {
+ 		/* CEA VICs other than #1 requre limited range RGB
+-		 * output.  Apply a colorspace conversion to squash
+-		 * 0-255 down to 16-235.  The matrix here is:
++		 * output unless overridden by an AVI infoframe.
++		 * Apply a colorspace conversion to squash 0-255 down
++		 * to 16-235.  The matrix here is:
+ 		 *
+ 		 * [ 0      0      0.8594 16]
+ 		 * [ 0      0.8594 0      16]
+@@ -355,6 +475,9 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ 		HD_WRITE(VC4_HD_CSC_24_23, (0x100 << 16) | 0x000);
+ 		HD_WRITE(VC4_HD_CSC_32_31, (0x000 << 16) | 0x6e0);
+ 		HD_WRITE(VC4_HD_CSC_34_33, (0x100 << 16) | 0x000);
++		vc4_encoder->limited_rgb_range = true;
++	} else {
++		vc4_encoder->limited_rgb_range = false;
+ 	}
+ 
+ 	/* The RGB order applies even when CSC is disabled. */
+@@ -373,6 +496,8 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
+ 	struct drm_device *dev = encoder->dev;
+ 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+ 
++	HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG, 0);
++
+ 	HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+ 	HD_WRITE(VC4_HD_VID_CTL,
+ 		 HD_READ(VC4_HD_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
+@@ -425,9 +550,10 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+ 			   HDMI_READ(VC4_HDMI_SCHEDULER_CONTROL) |
+ 			   VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT);
+ 
+-		/* XXX: Set HDMI_RAM_PACKET_CONFIG (1 << 16) and set
+-		 * up the infoframe.
+-		 */
++		HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG,
++			   VC4_HDMI_RAM_PACKET_ENABLE);
++
++		vc4_hdmi_set_infoframes(encoder);
+ 
+ 		drift = HDMI_READ(VC4_HDMI_FIFO_CTL);
+ 		drift &= VC4_HDMI_FIFO_VALID_WRITE_MASK;
+diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
+index 9ecd6ff..a4b5370 100644
+--- a/drivers/gpu/drm/vc4/vc4_regs.h
++++ b/drivers/gpu/drm/vc4/vc4_regs.h
+@@ -438,6 +438,8 @@
+ #define VC4_HDMI_RAM_PACKET_CONFIG		0x0a0
+ # define VC4_HDMI_RAM_PACKET_ENABLE		BIT(16)
+ 
++#define VC4_HDMI_RAM_PACKET_STATUS		0x0a4
++
+ #define VC4_HDMI_HORZA				0x0c4
+ # define VC4_HDMI_HORZA_VPOS			BIT(14)
+ # define VC4_HDMI_HORZA_HPOS			BIT(13)
+@@ -499,6 +501,9 @@
+ 
+ #define VC4_HDMI_TX_PHY_RESET_CTL		0x2c0
+ 
++#define VC4_HDMI_GCP_0				0x400
++#define VC4_HDMI_PACKET_STRIDE			0x24
++
+ #define VC4_HD_M_CTL				0x00c
+ # define VC4_HD_M_REGISTER_FILE_STANDBY		(3 << 6)
+ # define VC4_HD_M_RAM_STANDBY			(3 << 4)
+-- 
+2.9.3
+
+From c4e634ce412d97f0e61223b2a5b3f8f9600cd4dc Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Fri, 30 Sep 2016 10:07:27 -0700
+Subject: clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.
+
+Fixes setting low-resolution video modes on HDMI.  Now the PLLH_PIX
+divider adjusts itself until the PLLH is within bounds.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 11 ++++-------
+ 1 file changed, 4 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
+index b68bf57..8c7763f 100644
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -502,8 +502,12 @@ static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
+ static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ 				   unsigned long *parent_rate)
+ {
++	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
++	const struct bcm2835_pll_data *data = pll->data;
+ 	u32 ndiv, fdiv;
+ 
++	rate = clamp(rate, data->min_rate, data->max_rate);
++
+ 	bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);
+ 
+ 	return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
+@@ -608,13 +612,6 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw,
+ 	u32 ana[4];
+ 	int i;
+ 
+-	if (rate < data->min_rate || rate > data->max_rate) {
+-		dev_err(cprman->dev, "%s: rate out of spec: %lu vs (%lu, %lu)\n",
+-			clk_hw_get_name(hw), rate,
+-			data->min_rate, data->max_rate);
+-		return -EINVAL;
+-	}
+-
+ 	if (rate > data->max_fb_rate) {
+ 		use_fb_prediv = true;
+ 		rate /= 2;
+-- 
+cgit v0.12
+
+From e69fdcca836f0b81a2260b69429c8622a80ea891 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Wed, 1 Jun 2016 12:05:33 -0700
+Subject: clk: bcm2835: Mark the VPU clock as critical
+
+The VPU clock is also the clock for our AXI bus, so we really can't
+disable it.  This might have happened during boot if, for example,
+uart1 (aux_uart clock) probed and was then disabled before the other
+consumers of the VPU clock had probed.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Acked-by: Martin Sperl <kernel@martin.sperl.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
+index 7a79708..d9db03c 100644
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -443,6 +443,8 @@ struct bcm2835_clock_data {
+ 	/* Number of fractional bits in the divider */
+ 	u32 frac_bits;
+ 
++	u32 flags;
++
+ 	bool is_vpu_clock;
+ 	bool is_mash_clock;
+ };
+@@ -1230,7 +1232,7 @@ static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+ 	init.parent_names = parents;
+ 	init.num_parents = data->num_mux_parents;
+ 	init.name = data->name;
+-	init.flags = CLK_IGNORE_UNUSED;
++	init.flags = data->flags | CLK_IGNORE_UNUSED;
+ 
+ 	if (data->is_vpu_clock) {
+ 		init.ops = &bcm2835_vpu_clock_clk_ops;
+@@ -1649,6 +1651,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
+ 		.div_reg = CM_VPUDIV,
+ 		.int_bits = 12,
+ 		.frac_bits = 8,
++		.flags = CLK_IS_CRITICAL,
+ 		.is_vpu_clock = true),
+ 
+ 	/* clocks with per parent mux */
+-- 
+cgit v0.12
+
+From eddcbe8398fc7103fccd22aa6df6917caf0123bf Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Wed, 1 Jun 2016 12:05:34 -0700
+Subject: clk: bcm2835: Mark GPIO clocks enabled at boot as critical
+
+These divide off of PLLD_PER and are used for the ethernet and wifi
+PHYs source PLLs.  Neither of them is currently represented by a phy
+device that would grab the clock for us.
+
+This keeps other drivers from killing the networking PHYs when they
+disable their own clocks and trigger PLLD_PER's refcount going to 0.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Acked-by: Martin Sperl <kernel@martin.sperl.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
+index d9db03c..400615b 100644
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1239,6 +1239,12 @@ static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+ 	} else {
+ 		init.ops = &bcm2835_clock_clk_ops;
+ 		init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
++
++		/* If the clock wasn't actually enabled at boot, it's not
++		 * critical.
++		 */
++		if (!(cprman_read(cprman, data->ctl_reg) & CM_ENABLE))
++			init.flags &= ~CLK_IS_CRITICAL;
+ 	}
+ 
+ 	clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
+@@ -1708,13 +1714,15 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
+ 		.div_reg = CM_GP1DIV,
+ 		.int_bits = 12,
+ 		.frac_bits = 12,
++		.flags = CLK_IS_CRITICAL,
+ 		.is_mash_clock = true),
+ 	[BCM2835_CLOCK_GP2]	= REGISTER_PER_CLK(
+ 		.name = "gp2",
+ 		.ctl_reg = CM_GP2CTL,
+ 		.div_reg = CM_GP2DIV,
+ 		.int_bits = 12,
+-		.frac_bits = 12),
++		.frac_bits = 12,
++		.flags = CLK_IS_CRITICAL),
+ 
+ 	/* HDMI state machine */
+ 	[BCM2835_CLOCK_HSM]	= REGISTER_PER_CLK(
+-- 
+cgit v0.12
+
+From 9e400c5cc5c105e35216ac59a346f20cdd7613be Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Wed, 1 Jun 2016 12:05:35 -0700
+Subject: clk: bcm2835: Mark the CM SDRAM clock's parent as critical
+
+While the SDRAM is being driven by its dedicated PLL most of the time,
+there is a little loop running in the firmware that periodically turns
+on the CM SDRAM clock (using its pre-initialized parent) and switches
+SDRAM to using the CM clock to do PVT recalibration.
+
+This avoids system hangs if we choose SDRAM's parent for some other
+clock, then disable that clock.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Acked-by: Martin Sperl <kernel@martin.sperl.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
+index 400615b..c6420b3 100644
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -36,6 +36,7 @@
+ 
+ #include <linux/clk-provider.h>
+ #include <linux/clkdev.h>
++#include <linux/clk.h>
+ #include <linux/clk/bcm2835.h>
+ #include <linux/debugfs.h>
+ #include <linux/module.h>
+@@ -1801,6 +1802,25 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
+ 		.ctl_reg = CM_PERIICTL),
+ };
+ 
++/*
++ * Permanently take a reference on the parent of the SDRAM clock.
++ *
++ * While the SDRAM is being driven by its dedicated PLL most of the
++ * time, there is a little loop running in the firmware that
++ * periodically switches the SDRAM to using our CM clock to do PVT
++ * recalibration, with the assumption that the previously configured
++ * SDRAM parent is still enabled and running.
++ */
++static int bcm2835_mark_sdc_parent_critical(struct clk *sdc)
++{
++	struct clk *parent = clk_get_parent(sdc);
++
++	if (IS_ERR(parent))
++		return PTR_ERR(parent);
++
++	return clk_prepare_enable(parent);
++}
++
+ static int bcm2835_clk_probe(struct platform_device *pdev)
+ {
+ 	struct device *dev = &pdev->dev;
+@@ -1810,6 +1830,7 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
+ 	const struct bcm2835_clk_desc *desc;
+ 	const size_t asize = ARRAY_SIZE(clk_desc_array);
+ 	size_t i;
++	int ret;
+ 
+ 	cprman = devm_kzalloc(dev,
+ 			      sizeof(*cprman) + asize * sizeof(*clks),
+@@ -1840,6 +1861,10 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
+ 			clks[i] = desc->clk_register(cprman, desc->data);
+ 	}
+ 
++	ret = bcm2835_mark_sdc_parent_critical(clks[BCM2835_CLOCK_SDRAM]);
++	if (ret)
++		return ret;
++
+ 	return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
+ 				   &cprman->onecell);
+ }
+-- 
+cgit v0.12
+
+From 30772942cc1095c3129eecfa182e2c568e566b9d Mon Sep 17 00:00:00 2001
+From: Dan Carpenter <dan.carpenter@oracle.com>
+Date: Thu, 13 Oct 2016 11:54:31 +0300
+Subject: [PATCH] drm/vc4: Fix a couple error codes in vc4_cl_lookup_bos()
+
+If the allocation fails the current code returns success.  If
+copy_from_user() fails it returns the number of bytes remaining instead
+of -EFAULT.
+
+Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.")
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Reviewed-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/gpu/drm/vc4/vc4_gem.c | 9 +++++----
+ 1 file changed, 5 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c
+index ae1609e..4050540 100644
+--- a/drivers/gpu/drm/vc4/vc4_gem.c
++++ b/drivers/gpu/drm/vc4/vc4_gem.c
+@@ -548,14 +548,15 @@ vc4_cl_lookup_bos(struct drm_device *dev,
+ 
+ 	handles = drm_malloc_ab(exec->bo_count, sizeof(uint32_t));
+ 	if (!handles) {
++		ret = -ENOMEM;
+ 		DRM_ERROR("Failed to allocate incoming GEM handles\n");
+ 		goto fail;
+ 	}
+ 
+-	ret = copy_from_user(handles,
+-			     (void __user *)(uintptr_t)args->bo_handles,
+-			     exec->bo_count * sizeof(uint32_t));
+-	if (ret) {
++	if (copy_from_user(handles,
++			   (void __user *)(uintptr_t)args->bo_handles,
++			   exec->bo_count * sizeof(uint32_t))) {
++		ret = -EFAULT;
+ 		DRM_ERROR("Failed to copy in GEM handles\n");
+ 		goto fail;
+ 	}
+-- 
+2.9.3
+

block-blkg_destroy_all-should-clear-q-root_blkg-and-.patch

@@ -0,0 +1,64 @@
+From a08748fb2221ef03d54071e5ddfcc1b0cee6961c Mon Sep 17 00:00:00 2001
+From: Tejun Heo <tj@kernel.org>
+Date: Sat, 5 Sep 2015 15:47:36 -0400
+Subject: [PATCH] block: blkg_destroy_all() should clear q->root_blkg and
+ ->root_rl.blkg
+
+While making the root blkg unconditional, ec13b1d6f0a0 ("blkcg: always
+create the blkcg_gq for the root blkcg") removed the part which clears
+q->root_blkg and ->root_rl.blkg during q exit.  This leaves the two
+pointers dangling after blkg_destroy_all().  blk-throttle exit path
+performs blkg traversals and dereferences ->root_blkg and can lead to
+the following oops.
+
+ BUG: unable to handle kernel NULL pointer dereference at 0000000000000558
+ IP: [<ffffffff81389746>] __blkg_lookup+0x26/0x70
+ ...
+ task: ffff88001b4e2580 ti: ffff88001ac0c000 task.ti: ffff88001ac0c000
+ RIP: 0010:[<ffffffff81389746>]  [<ffffffff81389746>] __blkg_lookup+0x26/0x70
+ ...
+ Call Trace:
+  [<ffffffff8138d14a>] blk_throtl_drain+0x5a/0x110
+  [<ffffffff8138a108>] blkcg_drain_queue+0x18/0x20
+  [<ffffffff81369a70>] __blk_drain_queue+0xc0/0x170
+  [<ffffffff8136a101>] blk_queue_bypass_start+0x61/0x80
+  [<ffffffff81388c59>] blkcg_deactivate_policy+0x39/0x100
+  [<ffffffff8138d328>] blk_throtl_exit+0x38/0x50
+  [<ffffffff8138a14e>] blkcg_exit_queue+0x3e/0x50
+  [<ffffffff8137016e>] blk_release_queue+0x1e/0xc0
+ ...
+
+While the bug is a straigh-forward use-after-free bug, it is tricky to
+reproduce because blkg release is RCU protected and the rest of exit
+path usually finishes before RCU grace period.
+
+This patch fixes the bug by updating blkg_destro_all() to clear
+q->root_blkg and ->root_rl.blkg.
+
+Signed-off-by: Tejun Heo <tj@kernel.org>
+Reported-by: "Richard W.M. Jones" <rjones@redhat.com>
+Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
+Link: http://lkml.kernel.org/g/CA+5PVA5rzQ0s4723n5rHBcxQa9t0cW8BPPBekr_9aMRoWt2aYg@mail.gmail.com
+Fixes: ec13b1d6f0a0 ("blkcg: always create the blkcg_gq for the root blkcg")
+Cc: stable@vger.kernel.org # v4.2+
+---
+ block/blk-cgroup.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
+index d6283b3f5db5..9cc48d1d7abb 100644
+--- a/block/blk-cgroup.c
++++ b/block/blk-cgroup.c
+@@ -387,6 +387,9 @@ static void blkg_destroy_all(struct request_queue *q)
+ 		blkg_destroy(blkg);
+ 		spin_unlock(&blkcg->lock);
+ 	}
++
++	q->root_blkg = NULL;
++	q->root_rl.blkg = NULL;
+ }
+ 
+ /*
+-- 
+2.4.3
+

check-kabi

@@ -1,149 +0,0 @@
-#!/usr/bin/python3
-#
-# check-kabi - Red Hat kABI reference checking tool
-#
-# We use this script to check against reference Module.kabi files.
-#
-# Author: Jon Masters <jcm@redhat.com>
-# Copyright (C) 2007-2009 Red Hat, Inc.
-#
-# This software may be freely redistributed under the terms of the GNU
-# General Public License (GPL).
-
-# Changelog:
-#
-# 2018/06/01 - Update for python3 by Petr Oros.
-# 2009/08/15 - Updated for use in RHEL6.
-# 2007/06/13 - Initial rewrite in python by Jon Masters.
-
-__author__ = "Jon Masters <jcm@redhat.com>"
-__version__ = "2.0"
-__date__ = "2009/08/15"
-__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
-__license__ = "GPL"
-
-import getopt
-import string
-import sys
-
-true = 1
-false = 0
-
-
-def load_symvers(symvers, filename):
-    """Load a Module.symvers file."""
-
-    symvers_file = open(filename, "r")
-
-    while true:
-        in_line = symvers_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type = in_line.split()
-
-        symvers[symbol] = in_line[0:-1]
-
-
-def load_kabi(kabi, filename):
-    """Load a Module.kabi file."""
-
-    kabi_file = open(filename, "r")
-
-    while true:
-        in_line = kabi_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type = in_line.split()
-
-        kabi[symbol] = in_line[0:-1]
-
-
-def check_kabi(symvers, kabi):
-    """Check Module.kabi and Module.symvers files."""
-
-    fail = 0
-    warn = 0
-    changed_symbols = []
-    moved_symbols = []
-
-    for symbol in kabi:
-        abi_hash, abi_sym, abi_dir, abi_type = kabi[symbol].split()
-        if symbol in symvers:
-            sym_hash, sym_sym, sym_dir, sym_type = symvers[symbol].split()
-            if abi_hash != sym_hash:
-                fail = 1
-                changed_symbols.append(symbol)
-
-            if abi_dir != sym_dir:
-                warn = 1
-                moved_symbols.append(symbol)
-        else:
-            fail = 1
-            changed_symbols.append(symbol)
-
-    if fail:
-        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
-        print("")
-        print("The following symbols have been changed (this will cause an ABI breakage):")
-        print("")
-        for symbol in changed_symbols:
-            print(symbol)
-        print("")
-
-    if warn:
-        print("*** WARNING - ABI SYMBOLS MOVED ***")
-        print("")
-        print("The following symbols moved (typically caused by moving a symbol from being")
-        print("provided by the kernel vmlinux out to a loadable module):")
-        print("")
-        for symbol in moved_symbols:
-            print(symbol)
-        print("")
-
-    """Halt the build, if we got errors and/or warnings. In either case,
-       double-checkig is required to avoid introducing / concealing
-       KABI inconsistencies."""
-    if fail or warn:
-        sys.exit(1)
-    sys.exit(0)
-
-
-def usage():
-    print("""
-check-kabi: check Module.kabi and Module.symvers files.
-
-    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
-
-""")
-
-
-if __name__ == "__main__":
-
-    symvers_file = ""
-    kabi_file = ""
-
-    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
-
-    for o, v in opts:
-        if o == "-s":
-            symvers_file = v
-        if o == "-h":
-            usage()
-            sys.exit(0)
-        if o == "-k":
-            kabi_file = v
-
-    if (symvers_file == "") or (kabi_file == ""):
-        usage()
-        sys.exit(1)
-
-    symvers = {}
-    kabi = {}
-
-    load_symvers(symvers, symvers_file)
-    load_kabi(kabi, kabi_file)
-    check_kabi(symvers, kabi)

config-arm-generic

@@ -0,0 +1,707 @@
+CONFIG_KUSER_HELPERS=y
+# CONFIG_VDSO is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
+CONFIG_FB_SSD1307=m
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_SMT=y
+
+CONFIG_CC_STACKPROTECTOR=y
+
+# CONFIG_PID_IN_CONTEXTIDR is not set
+
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_BIG_LITTLE is not set
+# CONFIG_ARM_BIG_LITTLE_CPUIDLE is not set
+# CONFIG_IWMMXT is not set
+
+# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
+CONFIG_CHECKPOINT_RESTORE=y
+
+CONFIG_ARM_CPUIDLE=y
+
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_GPIO=y
+
+CONFIG_RCU_FANOUT_LEAF=16
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_ARM_SP805_WATCHDOG=m
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+
+CONFIG_SWIOTLB=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_FB_SIMPLE=y
+
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+
+CONFIG_ARM_PMU=y
+
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+
+# ARM AMBA generic HW
+CONFIG_ARM_AMBA=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_ARM_CCI=y
+CONFIG_ARM_CCN=y
+CONFIG_ARM_CCI400_PMU=y
+CONFIG_ARM_CCI5xx_PMU=y
+CONFIG_ARM_DMA_USE_IOMMU=y
+CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GLOBAL_TIMER=y
+CONFIG_ARM_SMMU=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_PL330_DMA=m
+CONFIG_GPIO_PL061=y
+CONFIG_USB_ISP1760=m
+CONFIG_ARM_PL172_MPMC=m
+CONFIG_DRM_HDLCD=m
+CONFIG_DRM_MALI_DISPLAY=m
+# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set
+
+# HW crypto and rng
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_AES_ARM=y
+CONFIG_CRYPTO_AES_ARM_BS=y
+CONFIG_CRYPTO_SHA1_ARM=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=y
+CONFIG_CRYPTO_SHA512_ARM=y
+CONFIG_TCG_TIS_I2C_ATMEL=m
+
+# EDAC
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_LEGACY_SYSFS=y
+
+# Regulators
+CONFIG_REGULATOR=y
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_PWM=m
+
+# ARM VExpress
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_VEXPRESS_SYSCFG=y
+CONFIG_COMMON_CLK_VERSATILE=y
+CONFIG_ARM_TIMER_SP804=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_VEXPRESS_OSC=y
+CONFIG_I2C_VERSATILE=m
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_REGULATOR_VEXPRESS=m
+CONFIG_SENSORS_VEXPRESS=m
+CONFIG_CLKSRC_VERSATILE=y
+CONFIG_POWER_RESET_VERSATILE=y
+# CONFIG_ARM_CHARLCD is not set
+
+# Broadcom
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM2835=y
+# CONFIG_ARCH_BCM_CYGNUS is not set
+# CONFIG_ARCH_BCM_NSP is not set
+# CONFIG_ARCH_BCM_5301X is not set
+# CONFIG_ARCH_BCM_281XX is not set
+# CONFIG_ARCH_BCM_21664 is not set
+# CONFIG_ARCH_BCM_63XX is not set
+# CONFIG_ARCH_BRCMSTB is not set
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_BCM_CYGNUS is not set
+# CONFIG_ARCH_BCM_NSP is not set
+# CONFIG_ARCH_BCM_5301X is not set
+# CONFIG_ARCH_BCM_281XX is not set
+# CONFIG_ARCH_BCM_21664 is not set
+# CONFIG_ARCH_BCM_63XX is not set
+# CONFIG_ARCH_BCM_23550 is not set
+# CONFIG_ARCH_BRCMSTB is not set
+# CONFIG_ARCH_BERLIN is not set
+# BCM 283x
+CONFIG_SERIAL_8250_BCM2835AUX=y
+CONFIG_DMA_BCM2835=m
+CONFIG_MMC_SDHCI_IPROC=m
+CONFIG_MMC_BCM2835_SDHOST=m
+CONFIG_BCM2835_MBOX=y
+CONFIG_PWM_BCM2835=m
+CONFIG_HW_RANDOM_BCM2835=m
+CONFIG_I2C_BCM2835=m
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
+CONFIG_BCM2835_WDT=m
+CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_DRM_VC4=m
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+# popular digital audio HATs
+CONFIG_SND_SOC_PCM512x=m
+CONFIG_SND_SOC_PCM512x_I2C=m
+CONFIG_SND_SOC_PCM512x_SPI=m
+CONFIG_SND_SOC_TPA6130A2=m
+CONFIG_SND_SOC_WM8804=m
+CONFIG_SND_SOC_WM8804_I2C=m
+CONFIG_SND_SOC_WM8804_SPI=m
+
+# Marvell EBU
+CONFIG_ARCH_MVEBU=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_MVEBU_DEVBUS=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_MV_XOR=y
+CONFIG_CRYPTO_DEV_MV_CESA=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=m
+CONFIG_ARMADA_THERMAL=m
+CONFIG_MMC_SDHCI_PXAV3=m
+CONFIG_MV643XX_ETH=m
+CONFIG_PINCTRL_MVEBU=y
+CONFIG_EDAC_MV64X60=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_88PM80X=m
+CONFIG_RTC_DRV_ISL12057=m
+CONFIG_RTC_DRV_MV=m
+CONFIG_RTC_DRV_ARMADA38X=m
+CONFIG_MVNETA=m
+CONFIG_MVNETA_BM_ENABLE=m
+CONFIG_GPIO_MVEBU=y
+CONFIG_MVEBU_CLK_CORE=y
+CONFIG_MVEBU_CLK_COREDIV=y
+CONFIG_MMC_MVSDIO=m
+CONFIG_SPI_ORION=m
+CONFIG_USB_MV_UDC=m
+CONFIG_USB_XHCI_MVEBU=m
+CONFIG_PHY_MVEBU_SATA=y
+CONFIG_AHCI_MVEBU=m
+# CONFIG_CACHE_FEROCEON_L2 is not set
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+# CONFIG_PCI_AARDVARK is not set
+
+# Rockchips
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_I2C_RK3X=m
+CONFIG_SPI_ROCKCHIP=m
+CONFIG_PWM_ROCKCHIP=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_ROCKCHIP_IODOMAIN=m
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_EMAC_ROCKCHIP=m
+CONFIG_MFD_RK808=m
+CONFIG_COMMON_CLK_RK808=m
+CONFIG_REGULATOR_RK808=m
+CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_HYM8563=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_ANALOGIX_DP=m
+CONFIG_ROCKCHIP_DW_HDMI=m
+CONFIG_ROCKCHIP_DW_MIPI_DSI=m
+CONFIG_ROCKCHIP_INNO_HDMI=m
+CONFIG_DRM_ANALOGIX_DP=m
+CONFIG_PHY_ROCKCHIP_USB=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP_I2S=m
+CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
+CONFIG_SND_SOC_ROCKCHIP_RT5645=m
+CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
+CONFIG_REGULATOR_ACT8865=m
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_CRYPTO_DEV_ROCKCHIP=m
+CONFIG_ROCKCHIP_EFUSE=m
+CONFIG_PHY_ROCKCHIP_EMMC=m
+CONFIG_PHY_ROCKCHIP_DP=m
+CONFIG_ROCKCHIP_MBOX=y
+
+# Tegra
+CONFIG_TEGRA_MC=y
+CONFIG_TEGRA124_EMC=y
+CONFIG_TEGRA_IOMMU_SMMU=y
+CONFIG_TEGRA_AHB=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_TRUSTED_FOUNDATIONS=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_PCI_TEGRA=y
+CONFIG_AHCI_TEGRA=m
+CONFIG_MMC_SDHCI_TEGRA=m
+CONFIG_TEGRA_WATCHDOG=m
+CONFIG_GPIO_TEGRA=y
+CONFIG_I2C_TEGRA=m
+CONFIG_SPI_TEGRA114=m
+CONFIG_PWM_TEGRA=m
+CONFIG_KEYBOARD_TEGRA=m
+CONFIG_USB_EHCI_TEGRA=m
+CONFIG_RTC_DRV_TEGRA=m
+CONFIG_ARM_TEGRA_DEVFREQ=m
+CONFIG_ARM_TEGRA124_CPUFREQ=m
+CONFIG_TEGRA_SOCTHERM=m
+CONFIG_PHY_TEGRA_XUSB=m
+CONFIG_USB_XHCI_TEGRA=m
+
+CONFIG_TEGRA_HOST1X=m
+CONFIG_TEGRA_HOST1X_FIREWALL=y
+CONFIG_DRM_TEGRA=m
+# CONFIG_DRM_TEGRA_DEBUG is not set
+CONFIG_DRM_TEGRA_STAGING=y
+CONFIG_NOUVEAU_PLATFORM_DRIVER=y
+CONFIG_SND_HDA_TEGRA=m
+CONFIG_RTC_DRV_MAX77686=m
+
+# CONFIG_ARM_TEGRA20_CPUFREQ is not set
+# CONFIG_MFD_NVEC is not set
+
+# Qualcomm - Don't currently support IPQ router devices
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_LCC_806X is not set
+# CONFIG_IPQ_GCC_4019 is not set
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_DWMAC_IPQ806X is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_IPQ4019 is not set
+# CONFIG_REGULATOR_QCOM_SPMI is not set
+# CONFIG_QCOM_SPMI_IADC is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+
+# Virt
+CONFIG_PARAVIRT=y
+CONFIG_PARAVIRT_TIME_ACCOUNTING=y
+
+CONFIG_EFI=y
+CONFIG_EFI_VARS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_EFI_VARS_PSTORE=y
+CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
+# CONFIG_EFI_BOOTLOADER_CONTROL is not set
+# CONFIG_EFI_CAPSULE_LOADER is not set
+
+# Power management / thermal / cpu scaling
+CONFIG_PM_OPP=y
+CONFIG_ARM_PSCI=y
+CONFIG_THERMAL=y
+CONFIG_CLOCK_THERMAL=y
+CONFIG_CPUFREQ_DT=m
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_DEVFREQ_THERMAL=y
+# CONFIG_ARM_DT_BL_CPUFREQ is not set
+# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
+CONFIG_SPMI=m
+CONFIG_MFD_SPMI_PMIC=m
+CONFIG_REGMAP_SPMI=m
+
+# Device tree
+CONFIG_DTC=y
+CONFIG_DMA_OF=y
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IOMMU=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_PCI_IRQ=m
+CONFIG_OF_PCI=m
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_THERMAL_OF=y
+
+# CONFIG_OF_MDIO is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+
+# Mailbox
+CONFIG_MAILBOX=y
+CONFIG_ARM_MHU=m
+# CONFIG_PL320_MBOX is not set
+CONFIG_ARM_SCPI_PROTOCOL=m
+CONFIG_ARM_SCPI_POWER_DOMAIN=m
+
+# NVMem
+CONFIG_NVMEM=m
+
+# SPI
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_DESIGNWARE=m
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_TEGRA20_SFLASH is not set
+# CONFIG_SPI_TEGRA20_SLINK is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_FSL_FTM is not set
+
+# USB
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_XHCI_PLATFORM=m
+CONFIG_USB_ULPI=y
+
+# usb gadget
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_VBUS_DRAW=100
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+CONFIG_U_SERIAL_CONSOLE=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_DUAL_ROLE=y
+CONFIG_USB_MUSB_DSPS=m
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_F_TCM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+# CONFIG_USB_CONFIGFS_RNDIS is not set
+CONFIG_USB_CONFIGFS_SERIAL=y
+# CONFIG_USB_CONFIGFS_F_LB_SS is not set
+# CONFIG_USB_CONFIGFS_F_FS is not set
+# CONFIG_USB_CONFIGFS_F_UAC1 is not set
+# CONFIG_USB_CONFIGFS_F_UAC2 is not set
+# CONFIG_USB_CONFIGFS_F_MIDI is not set
+# CONFIG_USB_CONFIGFS_F_HID is not set
+# CONFIG_USB_CONFIGFS_F_UVC is not set
+# CONFIG_USB_CONFIGFS_F_PRINTER is not set
+
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_FUSB300 is not set
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_BDC_UDC is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_AMD5536UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_ZERO_HNPTEST is not set
+
+# MMC/SD
+CONFIG_MMC_SPI=m
+CONFIG_MMC_SDHCI_OF_ARASAN=m
+
+# LCD Panels
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_LG_LG4573=m
+CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
+CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
+CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
+CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
+
+# Designware (used by numerous devices)
+CONFIG_MMC_DW=m
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_K3=y
+CONFIG_MMC_DW_PCI=y
+CONFIG_SPI_DW_MMIO=m
+CONFIG_SPI_DW_PCI=m
+# CONFIG_SPI_DW_MID_DMA is not set
+# CONFIG_MMC_QCOM_DML is not set
+CONFIG_USB_DWC2=m
+CONFIG_USB_DWC2_DUAL_ROLE=y
+CONFIG_USB_DWC2_PCI=m
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_DWC3=m
+CONFIG_USB_DWC3_DUAL_ROLE=y
+CONFIG_USB_DWC3_PCI=m
+CONFIG_USB_DWC3_OF_SIMPLE=m
+CONFIG_USB_DWC3_ULPI=y
+CONFIG_DW_WATCHDOG=m
+CONFIG_PCIE_DW=y
+# CONFIG_MMC_DW_EXYNOS is not set
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_GPIO_DWAPB=m
+
+# External Connectors
+CONFIG_EXTCON=m
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_ADC_JACK=m
+CONFIG_EXTCON_USB_GPIO=m
+# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_SM5502 is not set
+# CONFIG_EXTCON_RT8973A is not set
+
+# MTD
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_OF_PARTS=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_OF=m
+CONFIG_MTD_PHYSMAP_OF_VERSATILE=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_LPDDR2_NVM is not set
+
+# GPIO
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_WATCHDOG=m
+CONFIG_GPIOLIB=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_BACKLIGHT_GPIO=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_INPUT_SOC_BUTTON_ARRAY=m
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_RESTART=y
+# CONFIG_GPIO_74XX_MMIO is not set
+
+# Pin stuff
+CONFIG_PINMUX=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_PINCTRL_SINGLE=y
+
+# gpio
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+
+#i2c
+CONFIG_I2C_ARB_GPIO_CHALLENGE=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_MUX=m
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PINCTRL=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_REG=m
+CONFIG_I2C_MV64XXX=m
+
+# spi
+CONFIG_SPI_PL022=m
+
+# Sensors
+CONFIG_SENSORS_IIO_HWMON=m
+CONFIG_IIO_SYSFS_TRIGGER=m
+CONFIG_SENSORS_ARM_SCPI=m
+CONFIG_IIO_ST_PRESS=m
+CONFIG_IIO_ST_PRESS_I2C=m
+CONFIG_IIO_ST_PRESS_SPI=m
+CONFIG_TMP006=m
+CONFIG_BMP280=m
+CONFIG_TCS3472=m
+
+# PHY framework
+CONFIG_GENERIC_PHY=y
+
+CONFIG_SMC91X=m
+CONFIG_SMC911X=m
+
+CONFIG_CPU_THERMAL=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+
+# Contiguous Memory Allocator
+CONFIG_CMA=y
+CONFIG_DMA_CMA=y
+# CONFIG_CMA_DEBUG is not set
+CONFIG_CMA_DEBUGFS=y
+CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+
+# VFIO
+CONFIG_VFIO_PLATFORM=m
+CONFIG_VFIO_AMBA=m
+# CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET is not set
+
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+# CONFIG_XEN is not set
+# CONFIG_DRM_RCAR_DU is not set
+# CONFIG_I2C_RCAR is not set
+# CONFIG_DRM_SHMOBILE is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+# CONFIG_LOCK_STAT is not set
+
+# CONFIG_CADENCE_WATCHDOG is not set
+
+# CONFIG_DRM_ARMADA is not set
+
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_QCOM is not set
+CONFIG_COMMON_CLK_SCPI=m
+
+# CONFIG_ARM_PTDUMP is not set
+
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_BCM is not set
+# CONFIG_PHY_SAMSUNG_USB2 is not set
+# CONFIG_OMAP_GPMC_DEBUG is not set
+
+### turn off things which make no sense on embedded SoC
+
+# core
+
+# CONFIG_ISDN is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PARPORT is not set
+# CONFIG_FIREWIRE is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ISDN is not set
+# CONFIG_GAMEPORT is not set
+# CONFIG_AGP is not set
+
+# netdrv
+
+CONFIG_NET_VENDOR_MELLANOX=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XIRCOM is not set
+# CONFIG_TLAN is not set
+
+# scsi
+
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+
+# serial
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+
+# regulator
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_ANATOP is not set
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+
+# drm
+# CONFIG_DRM_VMWGFX is not set
+# CONFIG_IMX_IPUV3_CORE is not set
+# CONFIG_FB_DA8XX is not set
+
+# CONFIG_CORESIGHT is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+# CONFIG_TI_DAC7512 is not set
+
+# Bad Intel shit we don't care about
+# CONFIG_PINCTRL_BAYTRAIL is not set
+# CONFIG_PINCTRL_CHERRYVIEW is not set
+# CONFIG_PINCTRL_BROXTON is not set
+# CONFIG_PINCTRL_SUNRISEPOINT is not set
+# CONFIG_XILINX_ZYNQMP_DMA is not set
+
+# CONFIG_HISILICON_IRQ_MBIGEN is not set
+# CONFIG_QRTR is not set
+
+# This Xilinx option is now built for arm64 as well as ARM
+CONFIG_XILINX_VDMA=m

config-arm64

@@ -0,0 +1,318 @@
+CONFIG_64BIT=y
+CONFIG_ARM64=y
+
+# arm64 only SoCs
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_THUNDER=y
+# CONFIG_ARCH_ALPINE is not set
+# CONFIG_ARCH_BCM_IPROC is not set
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_EXYNOS is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_MEDIATEK is not set
+# CONFIG_ARCH_MESON is not set
+# CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_SPRD is not set
+# CONFIG_ARCH_STRATIX10 is not set
+# CONFIG_ARCH_VULCAN is not set
+# CONFIG_ARCH_ZYNQMP is not set
+# CONFIG_ARCH_UNIPHIER is not set
+# CONFIG_ARCH_LG1K is not set
+
+# Erratum
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23144=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+
+# AMBA / VExpress
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_AMBA_PL08X is not set
+CONFIG_ARM_SMMU_V3=y
+CONFIG_NR_CPUS=256
+
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARM64_64K_PAGES=y
+
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_LSE_ATOMICS=y
+CONFIG_ARM64_VHE=y
+CONFIG_ARM64_UAO=y
+
+# Have ARM team revisit
+# CONFIG_RELOCATABLE is not set
+# CONFIG_RANDOMIZE_BASE is not set
+
+CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y
+
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_BRCMUTIL=m
+CONFIG_BUG=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CMDLINE="console=ttyAMA0"
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+
+CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
+CONFIG_HVC_DRIVER=y
+# CONFIG_HVC_DCC is not set
+CONFIG_HZ=100
+
+CONFIG_KVM=y
+CONFIG_KVM_NEW_VGIC=y
+
+CONFIG_RCU_FANOUT=64
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+
+# CONFIG_SYS_HYPERVISOR is not set
+
+CONFIG_ARM_SBSA_WATCHDOG=m
+CONFIG_RTC_DRV_EFI=y
+
+CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_IPMI=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+CONFIG_ACPI_NFIT=m
+# CONFIG_ACPI_NFIT_DEBUG is not set
+CONFIG_PCC=y
+# CONFIG_ACPI_CPPC_CPUFREQ is not set
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+CONFIG_I2C_SCMI=m
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_ACPI_TABLE_UPGRADE=y
+CONFIG_ACPI_CONFIGFS=m
+
+CONFIG_NUMA=y
+CONFIG_ACPI_NUMA=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+CONFIG_NODES_SHIFT=9
+
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
+CONFIG_CRYPTO_CRC32_ARM64=m
+CONFIG_CRYPTO_DEV_CCP=y
+CONFIG_CRYPTO_DEV_CCP_DD=m
+CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
+
+# APM Xgene
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_COMMON_CLK_XGENE=y
+CONFIG_AHCI_XGENE=y
+CONFIG_PHY_XGENE=y
+CONFIG_NET_XGENE=m
+CONFIG_RTC_DRV_XGENE=m
+CONFIG_HW_RANDOM_XGENE=m
+CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_XGENE_SB=m
+CONFIG_XGENE_DMA=m
+CONFIG_EDAC_XGENE=m
+CONFIG_PCI_XGENE=y
+CONFIG_PCI_XGENE_MSI=y
+CONFIG_I2C_XGENE_SLIMPRO=m
+CONFIG_XGENE_SLIMPRO_MBOX=m
+CONFIG_MDIO_XGENE=m
+
+# AMD Seattle
+CONFIG_NET_SB1000=y
+CONFIG_AMD_XGBE=m
+CONFIG_AMD_XGBE_DCB=y
+CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m
+CONFIG_PINCTRL_AMD=y
+
+# HiSilicon
+CONFIG_HISILICON_IRQ_MBIGEN=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_PCI_HISI=y
+CONFIG_POWER_RESET_HISI=y
+CONFIG_HISI_THERMAL=m
+CONFIG_HW_RANDOM_HISI=m
+CONFIG_STUB_CLK_HI6220=y
+CONFIG_REGULATOR_HI655X=m
+CONFIG_PHY_HI6220_USB=m
+CONFIG_COMMON_RESET_HI6220=m
+CONFIG_HI6220_MBOX=m
+CONFIG_RESET_HISI=y
+CONFIG_MFD_HI655X_PMIC=m
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_HISI_KIRIN_DW_DSI=m
+CONFIG_MDIO_HISI_FEMAC=m
+CONFIG_INPUT_HISI_POWERKEY=m
+
+# Tegra
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_TEGRA210_ADMA=y
+CONFIG_MFD_MAX77620=y
+CONFIG_PINCTRL_MAX77620=m
+CONFIG_REGULATOR_MAX77620=m
+CONFIG_GPIO_MAX77620=m
+CONFIG_TEGRA_ACONNECT=y
+
+# AllWinner
+CONFIG_MACH_SUN50I=y
+CONFIG_SUNXI_RSB=m
+CONFIG_AHCI_SUNXI=m
+CONFIG_NET_VENDOR_ALLWINNER=y
+# CONFIG_SUN4I_EMAC is not set
+CONFIG_SUN8I_EMAC=m
+# CONFIG_MDIO_SUN4I is not set
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+# CONFIG_TOUCHSCREEN_SUN4I is not set
+# CONFIG_SERIO_SUN4I_PS2 is not set
+CONFIG_SUNXI_WATCHDOG=m
+CONFIG_MFD_SUN6I_PRCM=y
+CONFIG_IR_SUNXI=m
+CONFIG_MMC_SUNXI=m
+CONFIG_RTC_DRV_SUN6I=m
+CONFIG_PWM_SUN4I=m
+# CONFIG_PHY_SUN4I_USB is not set
+# CONFIG_PHY_SUN9I_USB is not set
+CONFIG_NVMEM_SUNXI_SID=m
+CONFIG_SUNXI_CCU=y
+# CONFIG_SUN8I_H3_CCU is not set
+
+# qcom
+# MSM8996 = SD-820, MSM8916 = SD-410
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_QCOM_GSBI=y
+CONFIG_PCIE_QCOM=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_MMC_SDHCI_MSM=m
+CONFIG_I2C_QUP=m
+CONFIG_SPI_QUP=m
+CONFIG_QCOM_WDT=m
+CONFIG_MFD_QCOM_RPM=m
+CONFIG_PINCTRL_MSM=y
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_REGULATOR_QCOM_RPM=m
+CONFIG_REGULATOR_QCOM_SMD_RPM=m
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_HWSPINLOCK_QCOM=m
+CONFIG_HW_RANDOM_MSM=m
+CONFIG_CRYPTO_DEV_QCE=m
+CONFIG_RTC_DRV_PM8XXX=m
+CONFIG_QCOM_QFPROM=m
+CONFIG_QCOM_SMEM=m
+CONFIG_QCOM_SMP2P=m
+CONFIG_QCOM_SMSM=m
+CONFIG_QCOM_SMD=m
+CONFIG_QCOM_SMD_RPM=m
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
+CONFIG_REGULATOR_QCOM_SPMI=m
+CONFIG_QCOM_SPMI_TEMP_ALARM=m
+CONFIG_QCOM_SPMI_IADC=m
+CONFIG_QCOM_SPMI_VADC=m
+CONFIG_SPMI_MSM_PMIC_ARB=m
+CONFIG_USB_QCOM_8X16_PHY=m
+CONFIG_USB_EHCI_MSM=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_MSM_OTG=m
+CONFIG_DRM_MSM=m
+# CONFIG_DRM_MSM_DSI is not set
+CONFIG_DRM_MSM_HDMI_HDCP=y
+# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
+CONFIG_QCOM_WCNSS_CTRL=m
+CONFIG_QCOM_COINCELL=m
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+# CONFIG_PHY_QCOM_UFS is not set
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+# CONFIG_PINCTRL_QDF2XXX is not set
+# CONFIG_INPUT_PM8941_PWRKEY is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_SENSORS_LTC2978_REGULATOR is not set
+# CONFIG_QCOM_Q6V5_PIL is not set
+
+# mvebu
+# CONFIG_MV_XOR_V2 is not set
+
+# ThunderX
+# CONFIG_MDIO_OCTEON is not set
+CONFIG_MDIO_THUNDER=m
+CONFIG_PCI_HOST_THUNDER_PEM=y
+CONFIG_PCI_HOST_THUNDER_ECAM=y
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_THUNDER_NIC_PF=m
+CONFIG_THUNDER_NIC_VF=m
+CONFIG_THUNDER_NIC_BGX=m
+# CONFIG_LIQUIDIO is not set
+
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_AHCI_SEATTLE=m
+
+CONFIG_LIBNVDIMM=m
+CONFIG_BTT=y
+CONFIG_ND_BTT=m
+CONFIG_ND_BLK=m
+
+# CONFIG_PMIC_OPREGION is not set
+# CONFIG_DEBUG_RODATA is not set
+
+CONFIG_DEBUG_SECTION_MISMATCH=y
+
+# CONFIG_SND_SOC is not set
+
+# busted build for various reasons
+#  uses pci_* for some reason to allocate DMA buffers
+# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
+#  weird include chain resulting in missing u64 type
+# CONFIG_USB_SPEEDTOUCH is not set
+#  dma issues in headers
+# CONFIG_PARPORT_PC is not set
+# CONFIG_VGA_CONSOLE is not set
+
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+# CONFIG_FSL_MC_BUS is not set
+# CONFIG_FUJITSU_ES is not set
+# CONFIG_IMX_THERMAL is not set
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+# CONFIG_BCM_PDC_MBOX is not set

config-armv7

@@ -0,0 +1,627 @@
+# ARM unified arch kernel
+
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_KEYSTONE is not set
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MMP=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_ZYNQ=y
+# CONFIG_ARCH_MDM9615 is not set
+
+# These are supported in the LPAE kernel
+# CONFIG_ARM_LPAE is not set
+# CONFIG_XEN is not set
+# CONFIG_ARM_VIRT_EXT is not set
+# CONFIG_VIRTUALIZATION is not set
+
+# omap 
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+CONFIG_SOC_OMAP5=y
+# CONFIG_SOC_DRA7XX is not set
+CONFIG_SOC_OMAP3430=y
+CONFIG_SOC_TI81XX=y
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_OMAP5_ERRATA_801819=y
+
+CONFIG_SOC_HAS_REALTIME_COUNTER=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_PACKAGE_CBB=y
+CONFIG_OMAP_PACKAGE_CUS=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+
+CONFIG_OMAP2PLUS_MBOX=m
+CONFIG_OMAP_MBOX_KFIFO_SIZE=256
+CONFIG_DMA_OMAP=m
+CONFIG_OMAP_IOMMU=y
+CONFIG_HWSPINLOCK_OMAP=m
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+# CONFIG_PHY_DM816X_USB is not set
+
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_8250_OMAP=m
+
+# Needed by omap_hsmmc for card detect on at least the am33xx (BBone) platforms (changed in 4.2)
+CONFIG_GPIO_OMAP=y
+CONFIG_GPIO_TWL4030=m
+CONFIG_GPIO_TWL6040=m
+CONFIG_I2C_OMAP=m
+CONFIG_CHARGER_TWL4030=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_BQ2415X=m
+CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=m
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_WATCHDOG=m
+CONFIG_BATTERY_TWL4030_MADC=m
+CONFIG_BATTERY_BQ27XXX=m
+CONFIG_BATTERY_BQ27XXX_I2C=y
+CONFIG_OMAP_USB2=m
+CONFIG_OMAP_CONTROL_PHY=m
+CONFIG_TI_PIPE3=m
+CONFIG_PCI_DRA7XX=y
+CONFIG_TWL4030_USB=m
+CONFIG_TWL6030_USB=m
+CONFIG_TWL6040_CORE=y
+CONFIG_CLK_TWL6040=m
+# DM814x such as hp-t410
+CONFIG_COMMON_CLK_TI_ADPLL=m
+CONFIG_OMAP_INTERCONNECT=m
+CONFIG_MFD_OMAP_USB_HOST=y
+CONFIG_HDQ_MASTER_OMAP=m
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_BACKLIGHT_PANDORA=m
+CONFIG_OMAP_OCP2SCP=m
+CONFIG_USB_EHCI_HCD_OMAP=m
+CONFIG_USB_OHCI_HCD_OMAP3=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_USB_DWC3_OMAP=m
+CONFIG_MMC_OMAP=m
+CONFIG_RTC_DRV_MAX8907=m
+# CONFIG_RTC_DRV_TWL92330 is not set
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_SENSORS_TWL4030_MADC=m
+CONFIG_TWL6030_GPADC=m
+CONFIG_BATTERY_RX51=m
+# CONFIG_IR_RX51 is not set
+
+# OMAP5 (possibly other devices too)
+CONFIG_MFD_PALMAS=y
+CONFIG_EXTCON_PALMAS=m
+CONFIG_GPIO_PALMAS=y
+CONFIG_PINCTRL_PALMAS=y
+CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_PBIAS=m
+CONFIG_RTC_DRV_PALMAS=m
+CONFIG_OMAP5_DSS_HDMI=y
+CONFIG_COMMON_CLK_PALMAS=m
+CONFIG_INPUT_PALMAS_PWRBUTTON=m
+CONFIG_PALMAS_GPADC=m
+
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_NFC_WILINK=m
+
+CONFIG_MTD_ONENAND_OMAP2=m
+CONFIG_MTD_NAND_OMAP2=m
+CONFIG_MTD_NAND_OMAP_BCH=y
+CONFIG_SPI_OMAP24XX=m
+CONFIG_SPI_TI_QSPI=m
+
+CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_TWL4030_VIBRA=m
+CONFIG_INPUT_TWL6040_VIBRA=m
+CONFIG_KEYBOARD_OMAP4=m
+CONFIG_KEYBOARD_TWL4030=m
+CONFIG_LEDS_TCA6507=m
+
+# OMAP thermal temp.
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
+
+# OMAP3 thermal/power
+CONFIG_POWER_AVS=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
+# CPUFREQ_CPU0 is used for scaling on DT OMAP
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+
+CONFIG_PWM_TIECAP=m
+CONFIG_PWM_TIEHRPWM=m
+CONFIG_PWM_TWL=m
+CONFIG_PWM_TWL_LED=m
+CONFIG_PWM_OMAP_DMTIMER=m
+# CONFIG_PWM_STMPE is not set
+
+CONFIG_CRYPTO_DEV_OMAP_SHAM=m
+# Disable for the moment, terribly broken upstream
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+CONFIG_CRYPTO_DEV_OMAP_DES=m
+CONFIG_HW_RANDOM_OMAP=m
+CONFIG_HW_RANDOM_OMAP3_ROM=m
+
+CONFIG_DRM_OMAP=m
+CONFIG_DRM_OMAP_NUM_CRTCS=2
+CONFIG_OMAP2_VRFB=y
+CONFIG_DRM_OMAP_ENCODER_OPA362=m
+CONFIG_DRM_OMAP_ENCODER_TFP410=m
+CONFIG_DRM_OMAP_ENCODER_TPD12S015=m
+CONFIG_DRM_OMAP_CONNECTOR_DVI=m
+CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
+CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
+CONFIG_DRM_OMAP_PANEL_DPI=m
+CONFIG_DRM_OMAP_PANEL_DSI_CM=m
+CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
+CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
+
+CONFIG_OMAP2_DSS=m
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_RFBI=y
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP4_DSS_HDMI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
+
+# Enable V4L2 drivers for OMAP2+
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_OMAP2_VOUT is not set
+CONFIG_VIDEO_OMAP3=m
+CONFIG_VIDEO_ADP1653=m
+# CONFIG_VIDEO_OMAP4 is not set
+# The ones below are for TI Davinci
+# CONFIG_VIDEO_DM6446_CCDC is not set
+# CONFIG_VIDEO_DM355_CCDC is not set
+
+CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_OMAP_SOC_AM3517EVM=m
+CONFIG_SND_OMAP_SOC_DMIC=m
+CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
+CONFIG_SND_OMAP_SOC_MCBSP=m
+CONFIG_SND_OMAP_SOC_MCPDM=m
+CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_OMAP_SOC_RX51=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC23_I2C=m
+CONFIG_SND_SOC_TLV320AIC23_SPI=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_TLV320AIC31XX=m
+CONFIG_SND_SOC_TWL4030=m
+CONFIG_SND_SOC_TWL6040=m
+CONFIG_RADIO_WL128X=m
+
+CONFIG_OMAP_REMOTEPROC=m
+CONFIG_TI_SYSCON_RESET=m
+
+# CONFIG_OMAP2_DSS_DEBUGFS is not set
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MUX_DEBUG is not set
+# CONFIG_VIDEO_OMAP3_DEBUG is not set
+
+# AM33xx/43xx
+CONFIG_SOC_AM33XX=y
+CONFIG_SOC_AM43XX=y
+CONFIG_AM335X_CONTROL_USB=m
+CONFIG_AM335X_PHY_USB=m
+CONFIG_USB_MUSB_AM335X_CHILD=m
+CONFIG_TI_CPPI41=m
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_TI_ST=m
+CONFIG_TI_DAC7512=m
+CONFIG_TI_DAVINCI_CPDMA=m
+CONFIG_TI_DAVINCI_EMAC=m
+CONFIG_TI_DAVINCI_MDIO=m
+CONFIG_TI_CPSW=m
+CONFIG_TI_CPSW_PHY_SEL=y
+CONFIG_TI_CPSW_ALE=m
+CONFIG_TI_CPTS=y
+CONFIG_TI_EMIF=m
+CONFIG_DRM_TILCDC=m
+# CONFIG_COMMON_CLK_TI_ADPLL is not set
+# We only need this until the BBB dts is actually updated
+CONFIG_DRM_TILCDC_SLAVE_COMPAT=y
+CONFIG_SPI_DAVINCI=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_I2S=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_VCIF=m
+CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m
+CONFIG_SND_EDMA_SOC=m
+CONFIG_SND_AM33XX_SOC_EVM=m
+CONFIG_REGULATOR_TI_ABB=m
+CONFIG_TI_ADC081C=m
+CONFIG_TI_AM335X_ADC=m
+CONFIG_PWM_TIPWMSS=y
+CONFIG_MFD_TPS65218=m
+CONFIG_REGULATOR_TPS65218=m
+CONFIG_INPUT_TPS65218_PWRBUTTON=m
+CONFIG_VIDEO_AM437X_VPFE=m
+CONFIG_UIO_PRUSS=m
+CONFIG_WKUP_M3_RPROC=m
+CONFIG_WKUP_M3_IPC=m
+
+# Builtin needed for BBone White
+CONFIG_MFD_TPS65217=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_CHARGER_TPS65217=m
+CONFIG_BACKLIGHT_TPS65217=m
+CONFIG_REGULATOR_TPS65217=m
+
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+
+# QCom
+CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_PINCTRL_APQ8064=m
+CONFIG_PINCTRL_APQ8084=m
+CONFIG_PINCTRL_MSM8660=m
+CONFIG_PINCTRL_MSM8960=m
+CONFIG_PINCTRL_MSM8X74=m
+CONFIG_PINCTRL_MSM8916=m
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=m
+CONFIG_COMMON_CLK_QCOM=m
+# CONFIG_MSM_GCC_8916 is not set
+# CONFIG_MSM_LCC_8960 is not set
+CONFIG_MFD_QCOM_RPM=m
+CONFIG_MFD_PM8921_CORE=m
+CONFIG_REGULATOR_QCOM_RPM=m
+CONFIG_REGULATOR_QCOM_SPMI=m
+CONFIG_APQ_GCC_8084=m
+CONFIG_APQ_MMCC_8084=m
+CONFIG_MSM_GCC_8660=m
+CONFIG_MSM_GCC_8960=m
+CONFIG_MSM_MMCC_8960=m
+CONFIG_MSM_GCC_8974=m
+CONFIG_MSM_MMCC_8974=m
+CONFIG_MSM_GCC_8996=m
+CONFIG_MSM_MMCC_8996=m
+CONFIG_HW_RANDOM_MSM=m
+CONFIG_I2C_QUP=m
+CONFIG_SPI_QUP=m
+CONFIG_POWER_RESET_MSM=y
+CONFIG_USB_MSM_OTG=m
+CONFIG_MMC_SDHCI_MSM=m
+CONFIG_MMC_QCOM_DML=m
+CONFIG_QCOM_BAM_DMA=m
+CONFIG_QCOM_GSBI=m
+CONFIG_QCOM_PM=y
+CONFIG_PHY_QCOM_APQ8064_SATA=m
+CONFIG_USB_DWC3_QCOM=m
+CONFIG_CRYPTO_DEV_QCE=m
+CONFIG_DRM_MSM=m
+# CONFIG_DRM_MSM_DSI is not set
+CONFIG_DRM_MSM_HDMI_HDCP=y
+# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
+CONFIG_USB_EHCI_MSM=m
+CONFIG_MFD_PM8XXX=m
+CONFIG_KEYBOARD_PMIC8XXX=m
+CONFIG_INPUT_PM8XXX_VIBRATOR=m
+CONFIG_INPUT_PMIC8XXX_PWRKEY=m
+CONFIG_INPUT_PM8941_PWRKEY=m
+CONFIG_RTC_DRV_PM8XXX=m
+CONFIG_QCOM_WDT=m
+CONFIG_SPMI_MSM_PMIC_ARB=m
+CONFIG_QCOM_SPMI_IADC=m
+CONFIG_QCOM_SPMI_VADC=m
+CONFIG_SND_SOC_QCOM=m
+CONFIG_SND_SOC_LPASS_CPU=m
+CONFIG_SND_SOC_LPASS_PLATFORM=m
+CONFIG_SND_SOC_STORM=m
+CONFIG_PHY_QCOM_UFS=m
+CONFIG_HWSPINLOCK_QCOM=m
+CONFIG_QCOM_COINCELL=m
+CONFIG_USB_QCOM_8X16_PHY=m
+CONFIG_QCOM_SMD=m
+CONFIG_QCOM_SMD_RPM=m
+CONFIG_QCOM_SMEM=m
+CONFIG_REGULATOR_QCOM_SMD_RPM=m
+CONFIG_QCOM_SMEM=m
+CONFIG_QCOM_QFPROM=m
+CONFIG_QCOM_WCNSS_CTRL=m
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_SMP2P=m
+CONFIG_PCIE_QCOM=y
+CONFIG_MTD_NAND_QCOM=m
+# CONFIG_QCOM_Q6V5_PIL is not set
+# CONFIG_MSM_IOMMU is not set
+
+# i.MX
+# CONFIG_MXC_DEBUG_BOARD is not set
+CONFIG_SOC_IMX50=y
+CONFIG_SOC_IMX51=y
+CONFIG_SOC_IMX53=y
+CONFIG_SOC_IMX6=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
+CONFIG_SOC_IMX6UL=y
+CONFIG_SOC_IMX7D=y
+# CONFIG_SOC_LS1021A is not set
+# CONFIG_SOC_VF610 is not set
+CONFIG_ARM_IMX6Q_CPUFREQ=m
+CONFIG_POWER_RESET_IMX=y
+CONFIG_PCI_IMX6=y
+CONFIG_IMX_GPCV2=y
+CONFIG_IMX_THERMAL=m
+CONFIG_IMX_SDMA=m
+CONFIG_IMX_DMA=m
+CONFIG_MXS_DMA=y
+CONFIG_AHCI_IMX=m
+CONFIG_PATA_IMX=m
+CONFIG_USB_EHCI_MXC=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_FSL_USB2=m
+CONFIG_NET_VENDOR_FREESCALE=y
+# CONFIG_GIANFAR is not set
+CONFIG_FEC=m
+# CONFIG_FSL_PQ_MDIO is not set
+# CONFIG_FSL_XGMAC_MDIO is not set
+CONFIG_KEYBOARD_SNVS_PWRKEY=m
+CONFIG_KEYBOARD_IMX=m
+CONFIG_KEYBOARD_STMPE=m
+CONFIG_TOUCHSCREEN_STMPE=m
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_PINCTRL_IMX6SL=y
+CONFIG_I2C_IMX=m
+CONFIG_STMPE_I2C=y
+CONFIG_SPI_IMX=m
+CONFIG_SPI_FSL_QUADSPI=m
+CONFIG_STMPE_SPI=y
+CONFIG_MFD_MC13XXX_SPI=m
+CONFIG_MFD_STMPE=y
+CONFIG_MTD_NAND_GPMI_NAND=m
+CONFIG_W1_MASTER_MXC=m
+CONFIG_IMX_WEIM=y
+CONFIG_IMX2_WDT=m
+CONFIG_HW_RANDOM_MXC_RNGA=m
+CONFIG_CRYPTO_DEV_SAHARA=m
+CONFIG_CRYPTO_DEV_FSL_CAAM=m
+CONFIG_CRYPTO_DEV_FSL_CAAM_JR=m
+CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=3
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=8
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=8192
+CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=m
+CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=m
+CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=m
+CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=m
+# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
+# CONFIG_CRYPTO_DEV_MXS_DCP is not set
+# CONFIG_CRYPTO_DEV_MXC_SCC is not set
+CONFIG_RTC_DRV_SNVS=m
+CONFIG_FB_MXS=m
+# CONFIG_FB_MX3 is not set
+# CONFIG_FB_IMX is not set
+CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
+CONFIG_NVMEM_IMX_OCOTP=m
+
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_FSL_ASOC_CARD=m
+CONFIG_SND_SOC_FSL_ASRC=m
+CONFIG_SND_SOC_FSL_ESAI=m
+CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_SOC_FSL_SPDIF=m
+CONFIG_SND_SOC_FSL_SSI=m
+CONFIG_SND_SOC_FSL_UTILS=m
+CONFIG_SND_SOC_IMX_SSI=m
+CONFIG_SND_SOC_IMX_AUDMUX=m
+CONFIG_SND_SOC_IMX_ES8328=m
+CONFIG_SND_SOC_IMX_PCM_FIQ=m
+CONFIG_SND_SOC_IMX_PCM_DMA=m
+CONFIG_SND_SOC_IMX_SGTL5000=m
+CONFIG_SND_SOC_IMX_WM8962=m
+CONFIG_SND_SOC_IMX_MC13783=m
+CONFIG_SND_SOC_IMX_SPDIF=m
+CONFIG_SND_SOC_CS42XX8_I2C=m
+CONFIG_SND_SOC_ES8328=m
+CONFIG_SND_SOC_ES8328_I2C=m
+CONFIG_SND_SOC_ES8328_SPI=m
+CONFIG_SND_SOC_EUKREA_TLV320=m
+CONFIG_SND_SOC_SGTL5000=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8962=m
+
+CONFIG_USB_IMX21_HCD=m
+CONFIG_USB_MXS_PHY=m
+CONFIG_MMC_SDHCI_ESDHC_IMX=m
+CONFIG_MMC_MXC=m
+CONFIG_SPI_MXS=m
+CONFIG_RTC_DRV_IMXDI=m
+CONFIG_RTC_DRV_MXC=m
+# CONFIG_MX3_IPU is not set
+# CONFIG_MX3_IPU_IRQS is not set
+
+CONFIG_PWM_IMX=m
+CONFIG_DRM_IMX=m
+CONFIG_DRM_IMX_HDMI=m
+CONFIG_IMX_IPUV3_CORE=m
+CONFIG_DRM_IMX_IPUV3=m
+CONFIG_DRM_IMX_LDB=m
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
+CONFIG_DRM_IMX_TVE=m
+CONFIG_DRM_ETNAVIV=m
+# CONFIG_DRM_ETNAVIV_REGISTER_LOGGING is not set
+CONFIG_VIDEO_CODA=m
+
+CONFIG_IMX7D_ADC=m
+CONFIG_SENSORS_MC13783_ADC=m
+CONFIG_REGULATOR_ANATOP=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_LEDS_MC13783=m
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_CAN_FLEXCAN=m
+
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_INPUT_88PM80X_ONKEY=m
+
+# i.MX6Q (and likely Samsung among others) 
+CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_DA9052_SPI=y
+CONFIG_MFD_DA9055=y
+CONFIG_TOUCHSCREEN_DA9052=m
+CONFIG_INPUT_DA9052_ONKEY=m
+CONFIG_INPUT_DA9055_ONKEY=m
+CONFIG_GPIO_DA9052=m
+CONFIG_GPIO_DA9055=m
+CONFIG_GPIO_STMPE=y
+CONFIG_BATTERY_DA9052=m
+CONFIG_SENSORS_DA9052_ADC=m
+CONFIG_SENSORS_DA9055=m
+CONFIG_DA9052_WATCHDOG=m
+CONFIG_DA9055_WATCHDOG=m
+CONFIG_BACKLIGHT_DA9052=m
+CONFIG_LEDS_DA9052=m
+CONFIG_RTC_DRV_DA9052=m
+CONFIG_RTC_DRV_DA9055=m
+CONFIG_REGULATOR_DA9052=m
+CONFIG_REGULATOR_DA9055=m
+
+# picoxcell
+# CONFIG_CRYPTO_DEV_PICOXCELL is not set
+
+# MMP XO 1.75
+# CONFIG_MACH_BROWNSTONE is not set
+# CONFIG_MACH_FLINT is not set
+# CONFIG_MACH_MARVELL_JASPER is not set
+CONFIG_MACH_MMP2_DT=y
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+CONFIG_SND_MMP_SOC=y
+CONFIG_SND_PXA910_SOC=m
+CONFIG_MMC_SDHCI_PXAV2=m
+CONFIG_MMP_PDMA=y
+CONFIG_MMP_TDMA=y
+CONFIG_PXA_DMA=y
+CONFIG_SERIO_OLPC_APSP=m
+
+# Exynos 4
+CONFIG_ARCH_EXYNOS4=y
+CONFIG_SOC_EXYNOS4212=y
+CONFIG_SOC_EXYNOS4412=y
+CONFIG_SOC_EXYNOS4415=y
+CONFIG_AK8975=m
+CONFIG_CM36651=m
+CONFIG_KEYBOARD_SAMSUNG=m
+
+# Allwinner
+CONFIG_MACH_SUN4I=y
+CONFIG_MACH_SUN5I=y
+
+# Tegra (non A15)
+CONFIG_ARCH_TEGRA_2x_SOC=y
+CONFIG_ARCH_TEGRA_3x_SOC=y
+CONFIG_TEGRA20_MC=y
+CONFIG_TEGRA_IOMMU_GART=y
+CONFIG_SPI_TEGRA20_SFLASH=m
+CONFIG_SPI_TEGRA20_SLINK=m
+CONFIG_MFD_MAX8907=m
+CONFIG_SND_SOC_TEGRA_ALC5632=m
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
+CONFIG_SND_SOC_TEGRA_WM8753=m
+CONFIG_SND_SOC_TEGRA_WM8903=m
+CONFIG_SND_SOC_TEGRA_WM9712=m
+CONFIG_SND_SOC_TEGRA20_AC97=m
+CONFIG_SND_SOC_TEGRA20_DAS=m
+CONFIG_SND_SOC_TEGRA20_SPDIF=m
+
+# AC100 (PAZ00)
+CONFIG_MFD_NVEC=y
+CONFIG_MFD_TPS80031=y
+CONFIG_KEYBOARD_NVEC=y
+CONFIG_SERIO_NVEC_PS2=y
+CONFIG_NVEC_POWER=y
+CONFIG_NVEC_PAZ00=y
+CONFIG_MFD_TPS6586X=y
+CONFIG_GPIO_TPS6586X=y
+CONFIG_RTC_DRV_TPS6586X=m
+
+# Zynq-7xxx
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_COMMON_CLK_AXI_CLKGEN=m
+CONFIG_COMMON_CLK_SI570=m
+CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
+CONFIG_ARM_ZYNQ_CPUIDLE=y
+CONFIG_LATTICE_ECP3_CONFIG=m
+CONFIG_NET_VENDOR_XILINX=y
+CONFIG_XILINX_EMACLITE=m
+CONFIG_GPIO_XILINX=y
+CONFIG_GPIO_ZYNQ=m
+CONFIG_I2C_XILINX=m
+CONFIG_SPI_XILINX=m
+CONFIG_SPI_CADENCE=m
+CONFIG_I2C_CADENCE=m
+CONFIG_XILINX_WATCHDOG=m
+CONFIG_XILINX_XADC=m
+CONFIG_SND_SOC_ADI=m
+CONFIG_SND_SOC_ADI_AXI_I2S=m
+CONFIG_SND_SOC_ADI_AXI_SPDIF=m
+CONFIG_XILLYBUS_OF=m
+CONFIG_GS_FPGABOOT=m
+CONFIG_USB_GADGET_XILINX=m
+CONFIG_PCIE_XILINX=y
+CONFIG_CADENCE_WATCHDOG=m
+CONFIG_REGULATOR_ISL9305=m
+CONFIG_PINCTRL_ZYNQ=y
+CONFIG_AXI_DMAC=m
+CONFIG_EDAC_SYNOPSYS=m
+
+# Multi function devices
+CONFIG_MFD_88PM800=m
+CONFIG_MFD_88PM805=m
+CONFIG_MFD_T7L66XB=y
+CONFIG_MFD_TC6387XB=y
+
+# Generic drivers
+CONFIG_REMOTEPROC=m
+
+# Regulator drivers
+CONFIG_REGULATOR_FAN53555=m
+# CONFIG_REGULATOR_88PM800 is not set
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_LP872X=y
+CONFIG_REGULATOR_LP8755=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8907=m
+CONFIG_REGULATOR_MAX8952=m

config-armv7-generic

@@ -0,0 +1,784 @@
+# arm configs for sharing between armv7 and armv7-lpae
+# Generic ARM config options
+CONFIG_ARM=y
+
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V7=y
+
+CONFIG_CMDLINE=""
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_AEABI=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+CONFIG_IWMMXT=y
+
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ASM_UNIFIED=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_CPU_TOPOLOGY=y
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_SWP_EMULATE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_HIGHPTE=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_ATAGS=y
+CONFIG_ATAGS_PROC=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_IRQ_CROSSBAR=y
+CONFIG_IOMMU_IO_PGTABLE_LPAE=y
+CONFIG_CPU_SW_DOMAIN_PAN=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_NR_CPUS=32
+
+# CONFIG_MCPM is not set
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_DMA_CACHE_RWFO is not set
+# CONFIG_THUMB2_KERNEL is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_ARM_VIRT_EXT is not set
+
+# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_ALIGN_RODATA is not set
+
+# Platforms enabled/disabled globally on ARMv7
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
+CONFIG_ARCH_VIRT=y
+# CONFIG_ARCH_ARTPEC is not set
+# CONFIG_ARCH_HI3xxx is not set
+# CONFIG_ARCH_HISI is not set
+# CONFIG_ARCH_MEDIATEK is not set
+# CONFIG_ARCH_MESON is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_QCOM is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SHMOBILE_MULTI is not set
+# CONFIG_ARCH_SIRF is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_STI is not set
+# CONFIG_ARCH_TANGO is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_VEXPRESS_SPC is not set
+# CONFIG_ARCH_WM8850 is not set
+# CONFIG_ARCH_DIGICOLOR is not set
+# CONFIG_ARCH_ALPINE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_UNIPHIER is not set
+# CONFIG_ARCH_ZX is not set
+# CONFIG_SOC_BRCMSTB is not set
+
+# errata
+# v5/v6
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+# Cortex-A8
+CONFIG_ARM_ERRATA_430973=y
+# The following two don't work with MP
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# Cortex-A9
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_742230=y
+CONFIG_ARM_ERRATA_742231=y
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+# Disabled due to causing highbank to crash
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_PJ4B_ERRATA_4742=y
+# Cortex-A12/15/17
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_ARM_ERRATA_773022=y
+CONFIG_ARM_ERRATA_818325_852422=y
+CONFIG_ARM_ERRATA_821420=y
+CONFIG_ARM_ERRATA_825619=y
+CONFIG_ARM_ERRATA_852421=y
+CONFIG_ARM_ERRATA_852423=y
+
+# generic that deviates from or should be merged into config-generic
+CONFIG_SMP_ON_UP=y
+CONFIG_HIGHMEM=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ARM_MODULE_PLTS is not set
+
+CONFIG_RCU_FANOUT=32
+
+# Dynamic Voltage and Frequency Scaling
+CONFIG_PM_DEVFREQ=y
+CONFIG_PM_DEVFREQ_EVENT=y
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_LSM_MMAP_MIN_ADDR=32768
+
+# CONFIG_PCI_LAYERSCAPE is not set
+
+# Do NOT enable this, it breaks stuff and makes things go slow
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+CONFIG_LBDAF=y
+
+# Little.BIG
+CONFIG_BIG_LITTLE=y
+CONFIG_BL_SWITCHER=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=m
+CONFIG_ARM_SCPI_CPUFREQ=m
+CONFIG_ARCH_VEXPRESS_DCSCB=y
+CONFIG_ARCH_VEXPRESS_TC2_PM=y
+CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=m
+CONFIG_ARM_BIG_LITTLE_CPUIDLE=y
+# CONFIG_BL_SWITCHER_DUMMY_IF is not set
+
+# GRR, needed for MFD_AS3722
+CONFIG_I2C=y
+
+# Device tree
+CONFIG_USE_OF=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_APPENDED_DTB=y
+
+# General vexpress ARM drivers
+CONFIG_SERIO_AMBAKMI=m
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+
+CONFIG_RTC_DRV_PL030=y
+CONFIG_AMBA_PL08X=y
+CONFIG_SND_ARMAACI=m
+
+# highbank
+CONFIG_EDAC_HIGHBANK_MC=m
+CONFIG_EDAC_HIGHBANK_L2=m
+CONFIG_SATA_HIGHBANK=m
+CONFIG_ARM_HIGHBANK_CPUFREQ=m
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
+CONFIG_PL320_MBOX=y
+CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
+
+# AllWinner
+# CONFIG_MACH_SUN4I is not set
+# CONFIG_MACH_SUN5I is not set
+CONFIG_MACH_SUN6I=y
+CONFIG_MACH_SUN7I=y
+CONFIG_MACH_SUN8I=y
+CONFIG_MACH_SUN9I=y
+CONFIG_SUNXI_CCU=y
+CONFIG_SUN8I_H3_CCU=y
+CONFIG_SUNXI_SRAM=y
+CONFIG_DMA_SUN4I=m
+CONFIG_DMA_SUN6I=m
+CONFIG_DRM_SUN4I=m
+CONFIG_SUNXI_WATCHDOG=m
+CONFIG_NET_VENDOR_ALLWINNER=y
+CONFIG_RTC_DRV_SUNXI=m
+CONFIG_PHY_SUN4I_USB=m
+CONFIG_PHY_SUN9I_USB=m
+CONFIG_AHCI_SUNXI=m
+CONFIG_SPI_SUN4I=m
+CONFIG_SPI_SUN6I=m
+CONFIG_MMC_SUNXI=m
+CONFIG_I2C_SUN6I_P2WI=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_TOUCHSCREEN_SUN4I=m
+CONFIG_MFD_AXP20X=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X_RSB=m
+CONFIG_AXP20X_POWER=m
+CONFIG_INPUT_AXP20X_PEK=m
+CONFIG_REGULATOR_AXP20X=m
+CONFIG_AXP288_FUEL_GAUGE=m
+CONFIG_AXP288_ADC=m
+CONFIG_EXTCON_AXP288=m
+CONFIG_AXP288_CHARGER=m
+CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
+CONFIG_IR_SUNXI=m
+CONFIG_MDIO_SUN4I=m
+CONFIG_DWMAC_SUNXI=m
+CONFIG_SUN4I_EMAC=m
+CONFIG_SUN8I_EMAC=m
+CONFIG_RTC_DRV_SUN6I=m
+CONFIG_MTD_NAND_SUNXI=m
+CONFIG_SERIO_SUN4I_PS2=m
+CONFIG_KEYBOARD_SUN4I_LRADC=m
+CONFIG_PWM_SUN4I=m
+CONFIG_CAN_SUN4I=m
+CONFIG_USB_MUSB_SUNXI=m
+CONFIG_CRYPTO_DEV_SUN4I_SS=m
+CONFIG_SND_SUN4I_CODEC=m
+CONFIG_SND_SUN4I_SPDIF=m
+CONFIG_SND_SUN4I_I2S=m
+CONFIG_SUNXI_RSB=m
+CONFIG_NVMEM_SUNXI_SID=m
+
+# Exynos
+CONFIG_ARCH_EXYNOS3=y
+# CONFIG_ARCH_EXYNOS4 is not set
+CONFIG_ARCH_EXYNOS5=y
+CONFIG_SOC_EXYNOS3250=y
+CONFIG_SOC_EXYNOS5250=y
+CONFIG_SOC_EXYNOS5420=y
+CONFIG_SOC_EXYNOS5440=y
+CONFIG_SOC_EXYNOS5260=y
+CONFIG_SOC_EXYNOS5410=y
+CONFIG_SOC_EXYNOS5800=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_ARM_EXYNOS5440_CPUFREQ=m
+CONFIG_ARM_EXYNOS_CPUIDLE=y
+CONFIG_EXYNOS5420_MCPM=y
+CONFIG_ARM_EXYNOS5_BUS_DEVFREQ=m
+# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
+# CONFIG_EXYNOS5420_MCPM not set
+CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
+# CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP is not set
+
+CONFIG_I2C_EXYNOS5=m
+CONFIG_I2C_S3C2410=m
+CONFIG_SPI_S3C64XX=m
+CONFIG_EXYNOS_THERMAL=m
+CONFIG_EXYNOS_ADC=m
+CONFIG_MMC_SDHCI_S3C=m
+CONFIG_MMC_SDHCI_S3C_DMA=y
+CONFIG_MMC_DW_EXYNOS=y
+# CONFIG_EXYNOS_IOMMU is not set
+CONFIG_PCI_EXYNOS=y
+CONFIG_PHY_EXYNOS5_USBDRD=m
+CONFIG_SAMSUNG_USBPHY=m
+CONFIG_PHY_SAMSUNG_USB2=m
+CONFIG_USB_EHCI_EXYNOS=m
+CONFIG_USB_OHCI_EXYNOS=m
+CONFIG_USB_DWC3_EXYNOS=m
+CONFIG_PHY_EXYNOS5250_SATA=m
+CONFIG_HW_RANDOM_EXYNOS=m
+CONFIG_CRYPTO_DEV_S5P=m
+CONFIG_PWM_SAMSUNG=m
+CONFIG_S3C2410_WATCHDOG=m
+CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_S2MPS11=m
+CONFIG_REGULATOR_S5M8767=m
+CONFIG_TCG_TIS_I2C_INFINEON=m
+CONFIG_RTC_DRV_S5M=m
+CONFIG_RTC_DRV_S3C=m
+CONFIG_MFD_WM8994=m
+CONFIG_GPIO_WM8994=m
+CONFIG_REGULATOR_WM8994=m
+
+CONFIG_EXYNOS_VIDEO=y
+CONFIG_EXYNOS_MIPI_DSI=y
+CONFIG_DRM_EXYNOS=m
+CONFIG_DRM_EXYNOS_DP=y
+CONFIG_DRM_EXYNOS_DPI=y
+CONFIG_DRM_EXYNOS_DSI=y
+CONFIG_DRM_EXYNOS_FIMC=y
+CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS5433_DECON=y
+CONFIG_DRM_EXYNOS_MIC=y
+CONFIG_DRM_EXYNOS7_DECON=y
+CONFIG_DRM_EXYNOS_G2D=y
+CONFIG_DRM_EXYNOS_GSC=y
+CONFIG_DRM_EXYNOS_HDMI=y
+# CONFIG_DRM_EXYNOS_IOMMU is not set
+CONFIG_DRM_EXYNOS_IPP=y
+CONFIG_DRM_EXYNOS_ROTATOR=y
+CONFIG_DRM_EXYNOS_VIDI=y
+CONFIG_DRM_EXYNOS_MIXER=y
+CONFIG_PHY_EXYNOS_DP_VIDEO=m
+CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
+# CONFIG_FB_S3C is not set
+CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
+CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
+CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
+CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
+CONFIG_VIDEO_S5P_FIMC=m
+CONFIG_VIDEO_S5P_MIPI_CSIS=m
+CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+# CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+
+CONFIG_SND_SOC_SAMSUNG=m
+CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
+CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
+CONFIG_SND_SOC_SMDK_WM8994_PCM=m
+CONFIG_SND_SOC_SNOW=m
+CONFIG_SND_SOC_ODROIDX2=m
+CONFIG_EXYNOS_AUDSS_CLK_CON=m
+# CONFIG_EXYNOS_IOMMU_DEBUG is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
+
+# Arndale/Origen
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_MAX77686=y
+CONFIG_REGULATOR_MAX8997=m
+CONFIG_REGULATOR_MAX77686=m
+CONFIG_REGULATOR_S2MPA01=m
+CONFIG_REGULATOR_S5M8767=m
+CONFIG_COMMON_CLK_MAX77686=m
+CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_INPUT_MAX8997_HAPTIC=m
+CONFIG_CHARGER_MAX8997=m
+CONFIG_LEDS_MAX8997=m
+CONFIG_RTC_DRV_MAX8997=m
+CONFIG_EXTCON_MAX8997=m
+
+# Tegra
+CONFIG_ARCH_TEGRA_114_SOC=y
+CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_SND_SOC_TEGRA=m
+CONFIG_SND_SOC_TEGRA30_AHUB=m
+CONFIG_SND_SOC_TEGRA30_I2S=m
+CONFIG_SND_SOC_TEGRA_MAX98090=m
+CONFIG_SND_SOC_TEGRA_RT5640=m
+CONFIG_SND_SOC_TEGRA_RT5677=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_AD525X_DPOT_SPI=m
+
+# Jetson TK1
+CONFIG_PINCTRL_AS3722=y
+CONFIG_POWER_RESET_AS3722=y
+CONFIG_MFD_AS3722=y
+CONFIG_REGULATOR_AS3722=m
+CONFIG_RTC_DRV_AS3722=y
+
+# TI Generic
+CONFIG_TI_SOC_THERMAL=m
+CONFIG_TI_THERMAL=y
+# CONFIG_OMAP3_THERMAL is not set
+CONFIG_MMC_OMAP_HS=m
+
+# mvebu
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_375=y
+CONFIG_MACH_ARMADA_38X=y
+CONFIG_MACH_ARMADA_39X=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_MACH_DOVE=y
+
+CONFIG_CACHE_TAUROS2=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
+CONFIG_ARM_MVEBU_V7_CPUIDLE=y
+CONFIG_PINCTRL_DOVE=y
+CONFIG_MMC_SDHCI_DOVE=m
+CONFIG_DOVE_THERMAL=m
+CONFIG_DRM_ARMADA=m
+CONFIG_ORION_WATCHDOG=m
+CONFIG_SND_KIRKWOOD_SOC=m
+CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
+CONFIG_USB_EHCI_HCD_ORION=m
+CONFIG_MVPP2=m
+CONFIG_COMMON_CLK_SI5351=m
+CONFIG_RTC_DRV_ARMADA38X=m
+# CONFIG_CACHE_FEROCEON_L2 is not set
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_LEDS_NS2=m
+# CONFIG_PCIE_ARMADA_8K is not set
+
+# DRM panels
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
+CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
+CONFIG_DRM_PANEL_LG_LG4573=m
+CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
+CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
+CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
+CONFIG_DRM_DW_HDMI=m
+CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
+
+# regmap
+CONFIG_REGMAP_SPI=m
+CONFIG_REGMAP_MMIO=m
+CONFIG_REGMAP_IRQ=y
+
+# usb net
+CONFIG_AX88796=m
+CONFIG_AX88796_93CX6=y
+
+# Multifunction Devices
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_TPS65912=y
+CONFIG_MFD_TPS65912_I2C=y
+CONFIG_MFD_TPS65912_SPI=y
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_PM8921_CORE is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# 
+
+# Pin stuff
+# CONFIG_PINCTRL_AMD is not set
+# CONFIG_PINCTRL_SAMSUNG is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+# CONFIG_PINCTRL_BCM281XX is not set
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+# CONFIG_PINCTRL_MSM8996 is not set
+
+# GPIO
+# CONFIG_GPIO_EM is not set
+CONFIG_GPIO_74X164=m
+CONFIG_GPIO_MAX7301=m
+CONFIG_GPIO_MC33880=m
+CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_TPS65912=m
+# CONFIG_GPIO_ZEVIO is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_REGISTER=y
+CONFIG_MDIO_BUS_MUX=m
+CONFIG_MDIO_BUS_MUX_GPIO=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=m
+CONFIG_INPUT_GPIO=m
+CONFIG_INPUT_GPIO_BEEPER=m
+CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_MATRIXKMAP=m
+CONFIG_KEYBOARD_MATRIX=m
+# CONFIG_GPIO_RCAR is not set
+CONFIG_W1_MASTER_GPIO=m
+
+# HW crypto and rng
+# CONFIG_CRYPTO_SHA1_ARM_CE is not set
+# CONFIG_CRYPTO_SHA2_ARM_CE is not set
+# CONFIG_CRYPTO_AES_ARM_CE is not set
+# CONFIG_CRYPTO_GHASH_ARM_CE is not set
+
+# DMA
+CONFIG_TI_EDMA=y
+
+# MTD
+# CONFIG_MG_DISK is not set
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
+CONFIG_MTD_DATAFLASH_OTP=y
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_CAFE=m
+# CONFIG_MTD_NAND_DENALI is not set
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND_FSMC=m
+CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_MXC=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_ORION=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_TMIO=m
+# CONFIG_MTD_NAND_BRCMNAND is not set
+# CONFIG_MTD_NAND_MTK is not set
+# CONFIG_MTD_MT81xx_NOR is not set
+CONFIG_MTD_SPI_NOR=m
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_SPINAND_MT29F=m
+CONFIG_MTD_SPINAND_ONDIEECC=y
+CONFIG_MTD_SST25L=m
+CONFIG_MTD_ST_SPI_FSM=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_93XX46=m
+
+# Sound
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AC97_CODEC=y
+
+# RTC
+CONFIG_RTC_DRV_DS1305=m
+CONFIG_RTC_DRV_DS1390=m
+CONFIG_RTC_DRV_M41T93=m
+CONFIG_RTC_DRV_M41T94=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_R9701=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_RX4581=m
+CONFIG_RTC_DRV_TPS65910=m
+CONFIG_RTC_DRV_TPS80031=m
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+
+# Regulators
+# CONFIG_REGULATOR_ACT8865 is not set
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_DA9210=m
+CONFIG_REGULATOR_FAN53555=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_LP872X=m
+CONFIG_REGULATOR_LP8755=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_MAX8973=m
+CONFIG_REGULATOR_PFUZE100=m
+CONFIG_REGULATOR_PV88060=m
+CONFIG_REGULATOR_PV88090=m
+CONFIG_REGULATOR_TPS51632=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65090=m
+CONFIG_REGULATOR_TPS65217=m
+CONFIG_REGULATOR_TPS6524X=m
+CONFIG_REGULATOR_TPS6586X=m
+CONFIG_REGULATOR_TPS65910=m
+CONFIG_REGULATOR_TPS65912=m
+CONFIG_REGULATOR_TPS80031=m
+CONFIG_REGULATOR_LTC3589=m
+CONFIG_REGULATOR_ANATOP=m
+CONFIG_REGULATOR_DA9211=m
+CONFIG_REGULATOR_ISL9305=m
+CONFIG_REGULATOR_MAX77802=m
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+CONFIG_SENSORS_LTC2978_REGULATOR=y
+
+CONFIG_POWER_AVS=y
+CONFIG_CHARGER_MANAGER=y
+CONFIG_CHARGER_BQ2415X=m
+CONFIG_CHARGER_BQ24190=m
+CONFIG_CHARGER_BQ24735=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_CHARGER_TPS65090=m
+CONFIG_PDA_POWER=m
+CONFIG_GENERIC_ADC_BATTERY=m
+CONFIG_BATTERY_SBS=m
+
+# Sensors
+CONFIG_SENSORS_AD7314=m
+CONFIG_SENSORS_ADCXX=m
+CONFIG_SENSORS_ADS7871=m
+CONFIG_SENSORS_BH1780=m
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_ISL29018=m
+CONFIG_SENSORS_ISL29028=m
+CONFIG_SENSORS_LIS3_SPI=m
+CONFIG_SENSORS_LM70=m
+CONFIG_SENSORS_MAX1111=m
+CONFIG_MPL115=m
+CONFIG_MPL3115=m
+CONFIG_SI7005=m
+CONFIG_SI7020=m
+
+CONFIG_LCD_L4F00242T03=m
+CONFIG_LCD_LMS283GF05=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_LCD_ILI922X=m
+CONFIG_LCD_ILI9320=m
+CONFIG_LCD_TDO24M=m
+CONFIG_LCD_VGG2432A4=m
+CONFIG_LCD_S6E63M0=m
+CONFIG_LCD_LD9040=m
+CONFIG_LCD_AMS369FG06=m
+CONFIG_LCD_LMS501KF03=m
+CONFIG_LCD_HX8357=m
+
+# Input
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_ARIZONA_HAPTICS=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+
+CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_AD7877=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_TSC2005=m
+
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_SYSCON=y
+CONFIG_BMP085_SPI=m
+
+CONFIG_MFD_SYSCON=y
+CONFIG_GPIO_SYSCON=m
+CONFIG_POWER_RESET_SYSCON=y
+
+CONFIG_SRAM=y
+
+# Ethernet
+CONFIG_KS8851=m
+CONFIG_KS8851_MLL=m
+CONFIG_ENC28J60=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_P54_SPI=m
+CONFIG_P54_SPI_DEFAULT_EEPROM=n
+CONFIG_MICREL_KS8995MA=m
+CONFIG_IEEE802154_MRF24J40=m
+
+CONFIG_ARM_KPROBES_TEST=m
+
+# jffs2
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+
+# Chromebook
+CONFIG_MFD_CROS_EC=m
+CONFIG_MFD_CROS_EC_I2C=m
+CONFIG_MFD_CROS_EC_SPI=m
+CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_I2C_CROS_EC_TUNNEL=m
+CONFIG_SND_SOC_TS3A227E=m
+CONFIG_CROS_EC_CHARDEV=m
+CONFIG_CROS_EC_PROTO=y
+CONFIG_PWM_CROS_EC=m
+
+# This newly introduced mess needs to be fixed upstream :-(
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_DWMAC_GENERIC=m
+# CONFIG_DWMAC_LPC18XX is not set
+# CONFIG_DWMAC_MESON is not set
+# CONFIG_DWMAC_SOCFPGA is not set
+# CONFIG_DWMAC_STI is not set
+
+CONFIG_R8188EU=m
+
+# CONFIG_88EU_AP_MODE is not set
+
+# CAN drivers
+# CONFIG_CAN_TI_HECC is not set
+# CONFIG_CAN_FLEXCAN is not set
+# CONFIG_CAN_RCAR is not set
+# CONFIG_CAN_RCAR_CANFD is not set
+
+# Needs work/investigation
+# CONFIG_ARM_KPROBES_TEST is not set
+
+# HW Enabled in armv7 not lpae
+# CONFIG_DRM_TILCDC is not set
+# CONFIG_DRM_IMX is not set
+# CONFIG_DRM_STI is not set
+# CONFIG_DRM_FSL_DCU is not set
+# CONFIG_AHCI_IMX is not set
+# CONFIG_IMX_THERMAL is not set
+# CONFIG_TI_DAC7512 is not set
+
+# Not needed on ARMv7
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+# CONFIG_SERIAL_8250_EM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_BCM63XX is not set
+# CONFIG_SERIAL_STM32 is not set
+# CONFIG_SERIAL_MPS2_UART is not set
+# CONFIG_FB_XILINX is not set
+# CONFIG_BRCMSTB_GISB_ARB is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SFC is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_POWER_RESET_QNAP is not set
+# CONFIG_MMC_TMIO is not set
+# CONFIG_PINCTRL_IMX35 is not set
+# CONFIG_DVB_USB_PCTV452E is not set
+
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_POWER_RESET_BRCMSTB is not set
+# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
+# CONFIG_CLK_QORIQ is not set
+# CONFIG_QORIQ_CPUFREQ is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_SND_SOC_APQ8016_SBC is not set
+# CONFIG_SND_SOC_TAS571X is not set
+
+# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set
+
+# Altera?
+# CONFIG_PCIE_ALTERA is not set
+
+# Debug options. We need to deal with them at some point like x86
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DMADEVICES_VDEBUG is not set
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+# CONFIG_OMAP2_DSS_DEBUG is not set
+# CONFIG_CRYPTO_DEV_UX500_DEBUG is not set
+# CONFIG_AB8500_DEBUG is not set
+# CONFIG_DEBUG_LL is not set

config-armv7-lpae

@@ -0,0 +1,77 @@
+# ARM A15 lpae unified arch kernel
+CONFIG_ARCH_KEYSTONE=y
+
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_SOC_OMAP5 is not set
+# CONFIG_SOC_AM33XX is not set
+# CONFIG_SOC_AM43XX is not set
+# CONFIG_SOC_DRA7XX is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_AXXIA is not set
+
+CONFIG_ARM_LPAE=y
+# CONFIG_CPU_SW_DOMAIN_PAN is not set
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
+
+CONFIG_KVM=y
+CONFIG_KVM_ARM_HOST=y
+CONFIG_KVM_NEW_VGIC=y
+
+# CONFIG_XEN is not set
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_XEN_WDT=m
+# CONFIG_XEN_BALLOON is not set
+
+# TI Keystone
+CONFIG_KEYSTONE_USB_PHY=m
+CONFIG_USB_DWC3_KEYSTONE=m
+CONFIG_GPIO_DAVINCI=y
+# CONFIG_I2C_DAVINCI is not set
+CONFIG_TI_AEMIF=m
+CONFIG_POWER_RESET_KEYSTONE=y
+CONFIG_DAVINCI_WATCHDOG=m
+CONFIG_SPI_DAVINCI=m
+CONFIG_TI_DAVINCI_MDIO=m
+CONFIG_KEYSTONE_IRQ=m
+CONFIG_PCI_KEYSTONE=y
+CONFIG_MTD_NAND_DAVINCI=m
+CONFIG_GPIO_SYSCON=m
+CONFIG_TI_MESSAGE_MANAGER=m
+
+# Tegra (non A15 device options)
+# CONFIG_ARCH_TEGRA_2x_SOC is not set
+# CONFIG_ARCH_TEGRA_3x_SOC is not set
+# CONFIG_TEGRA20_MC is not set
+# CONFIG_TEGRA_IOMMU_GART is not set
+# CONFIG_SPI_TEGRA20_SFLASH is not set
+# CONFIG_SPI_TEGRA20_SLINK is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_SND_SOC_TEGRA_ALC5632 is not set
+# CONFIG_SND_SOC_TEGRA_TRIMSLICE is not set
+# CONFIG_SND_SOC_TEGRA_WM8753 is not set
+# CONFIG_SND_SOC_TEGRA_WM8903 is not set
+# CONFIG_SND_SOC_TEGRA_WM9712 is not set
+# CONFIG_SND_SOC_TEGRA20_AC97 is not set
+# CONFIG_SND_SOC_TEGRA20_DAS is not set
+# CONFIG_SND_SOC_TEGRA20_SPDIF is not set
+# CONFIG_DRM_OMAP is not set
+# CONFIG_AM335X_PHY_USB is not set

config-debug

@@ -0,0 +1,131 @@
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_LOCK_TORTURE_TEST=m
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_PROVE_RCU=y
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+CONFIG_DEBUG_PER_CPU_MAPS=y
+CONFIG_CPUMASK_OFFSTACK=y
+
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_FAIL_IO_TIMEOUT=y
+CONFIG_FAIL_MMC_REQUEST=y
+# CONFIG_F2FS_FAULT_INJECTION is not set
+
+CONFIG_LOCK_STAT=y
+
+CONFIG_DEBUG_STACK_USAGE=y
+
+CONFIG_ACPI_DEBUG=y
+# CONFIG_ACPI_DEBUGGER is not set
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_PI_LIST=y
+
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+
+CONFIG_X86_PTDUMP=y
+CONFIG_ARM64_PTDUMP=y
+CONFIG_EFI_PGT_DUMP=y
+
+CONFIG_CAN_DEBUG_DEVICES=y
+
+CONFIG_MODULE_FORCE_UNLOAD=y
+
+
+CONFIG_DEBUG_NOTIFIERS=y
+
+CONFIG_DMA_API_DEBUG=y
+
+CONFIG_MMIOTRACE=y
+
+CONFIG_DEBUG_CREDENTIALS=y
+
+CONFIG_EXT4_DEBUG=y
+
+CONFIG_XFS_WARN=y
+
+CONFIG_DEBUG_PERF_USE_VMALLOC=y
+
+# off in both production debug and nodebug builds,
+#  on in rawhide nodebug builds
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+
+CONFIG_JBD2_DEBUG=y
+
+CONFIG_NFSD_FAULT_INJECTION=y
+
+CONFIG_DEBUG_BLK_CGROUP=y
+
+CONFIG_DRBD_FAULT_INJECTION=y
+
+CONFIG_ATH_DEBUG=y
+CONFIG_CARL9170_DEBUGFS=y
+CONFIG_IWLWIFI_DEVICE_TRACING=y
+
+CONFIG_RTLWIFI_DEBUG=y
+
+CONFIG_DEBUG_OBJECTS_WORK=y
+
+CONFIG_DMADEVICES_DEBUG=y
+# CONFIG_DMADEVICES_VDEBUG is not set
+
+CONFIG_PM_ADVANCED_DEBUG=y
+
+CONFIG_CEPH_LIB_PRETTYDEBUG=y
+CONFIG_QUOTA_DEBUG=y
+
+
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+CONFIG_KDB_DEFAULT_ENABLE=0x1
+CONFIG_KDB_CONTINUE_CATASTROPHIC=0
+
+CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
+CONFIG_PERCPU_TEST=m
+CONFIG_TEST_LIST_SORT=y
+CONFIG_TEST_STRING_HELPERS=m
+
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+
+CONFIG_WQ_WATCHDOG=y
+
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
+# CONFIG_DEBUG_KMEMLEAK_TEST is not set
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
+
+CONFIG_MAC80211_MESSAGE_TRACING=y
+
+CONFIG_EDAC_DEBUG=y
+
+CONFIG_SPI_DEBUG=y
+
+CONFIG_DEBUG_VM_PGFLAGS=y

config-i686-PAE

@@ -0,0 +1,8 @@
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_SYS_HYPERVISOR=y
+
+# I2O only works on non-PAE 32-bit x86
+# CONFIG_I2O is not set

config-no-extra

@@ -0,0 +1,27 @@
+### config-no-extra: only (to a first approximation) modules listed in
+###   mod-extra.list should be listed here. 
+
+# CONFIG_ISDN is not set
+# CONFIG_RDS is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATALK is not set
+# CONFIG_HAMRADIO is not set
+
+# CONFIG_DEV_APPLETALK is not set
+
+# CONFIG_FUSION is not set
+# CONFIG_I2O is not set
+
+# CONFIG_NET_TULIP is not set
+
+# CONFIG_HERMES is not set
+
+# CONFIG_OCFS2_FS is not set
+# CONFIG_CUSE is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set

config-nodebug

@@ -0,0 +1,131 @@
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_CPUMASK_OFFSTACK=y
+
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
+
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FAILSLAB is not set
+# CONFIG_FAIL_PAGE_ALLOC is not set
+# CONFIG_FAIL_MAKE_REQUEST is not set
+# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
+# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
+# CONFIG_FAIL_IO_TIMEOUT is not set
+# CONFIG_FAIL_MMC_REQUEST is not set
+# CONFIG_F2FS_FAULT_INJECTION is not set
+
+# CONFIG_LOCK_STAT is not set
+
+# CONFIG_DEBUG_STACK_USAGE is not set
+
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DEBUGGER is not set
+
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_PI_LIST is not set
+
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
+# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+
+CONFIG_X86_PTDUMP=y
+# CONFIG_ARM64_PTDUMP is not set
+# CONFIG_EFI_PGT_DUMP is not set
+
+# CONFIG_CAN_DEBUG_DEVICES is not set
+
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+
+
+# CONFIG_DEBUG_NOTIFIERS is not set
+
+# CONFIG_DMA_API_DEBUG is not set
+
+# CONFIG_MMIOTRACE is not set
+
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+# off in both production debug and nodebug builds,
+#  on in rawhide nodebug builds
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+
+# CONFIG_EXT4_DEBUG is not set
+
+# CONFIG_XFS_WARN is not set
+
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+
+# CONFIG_JBD2_DEBUG is not set
+
+# CONFIG_NFSD_FAULT_INJECTION is not set
+
+# CONFIG_DEBUG_BLK_CGROUP is not set
+
+# CONFIG_DRBD_FAULT_INJECTION is not set
+
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_CARL9170_DEBUGFS is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+
+# CONFIG_RTLWIFI_DEBUG is not set
+
+# CONFIG_DEBUG_OBJECTS_WORK is not set
+
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_DMADEVICES_VDEBUG is not set
+
+CONFIG_PM_ADVANCED_DEBUG=y
+
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_QUOTA_DEBUG is not set
+
+
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_DEFAULT_ENABLE=0x0
+CONFIG_KDB_KEYBOARD=y
+CONFIG_KDB_CONTINUE_CATASTROPHIC=0
+
+# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+# CONFIG_WQ_WATCHDOG is not set
+
+# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
+
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
+# CONFIG_DEBUG_KMEMLEAK_TEST is not set
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
+
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+
+# CONFIG_EDAC_DEBUG is not set
+
+# CONFIG_SPI_DEBUG is not set
+
+# CONFIG_DEBUG_VM_PGFLAGS is not set

config-powerpc64

@@ -0,0 +1,109 @@
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+
+CONFIG_PPC_MAPLE=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_DELKIN=m
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_IDE_PMAC is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_IDE_GD_ATAPI=y
+
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+
+# Power970 / G5
+CONFIG_EDAC_CPC925=m
+
+# Maple
+CONFIG_CPU_FREQ_MAPLE=y
+CONFIG_EDAC_AMD8111=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_MMIO_NVRAM=y
+
+# Apple G5
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_PMU=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_I2C_POWERMAC=y
+CONFIG_PMAC_RACKMETER=m
+CONFIG_PMAC_APM_EMU=m
+CONFIG_APM_EMULATION=m
+CONFIG_PMAC_SMU=y
+CONFIG_APPLE_AIRPORT=m
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_PATA_MACIO=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_RM31=y
+CONFIG_WINDFARM_PM72=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
+CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+CONFIG_AGP_UNINORTH=y
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m

config-powerpc64-generic

@@ -0,0 +1,383 @@
+CONFIG_PPC=y
+CONFIG_PPC64=y
+
+CONFIG_PPC_POWERNV=y
+CONFIG_PPC_PSERIES=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_MAPLE is not set
+# CONFIG_PPC_PASEMI is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_PMAC64 is not set
+# CONFIG_PPC_PS3 is not set
+CONFIG_HIBERNATION=n
+CONFIG_PPC_RADIX_MMU=y
+# CONFIG_FSL_LBC is not set
+
+CONFIG_EXTRA_TARGETS=""
+
+CONFIG_NR_CPUS=1024
+
+CONFIG_NR_IRQS=512
+CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_IRQSTACKS=y
+
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUGGER=y
+CONFIG_PPC_DENORMALISATION=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+
+CONFIG_FRAME_WARN=2048
+
+CONFIG_FORCE_MAX_ZONEORDER=9
+
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+
+CONFIG_BOOTX_TEXT=y
+
+CONFIG_ALTIVEC=y
+CONFIG_VSX=y
+
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+
+CONFIG_NUMA=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+CONFIG_PPC_64K_PAGES=y
+CONFIG_PPC_SUBPAGE_PROT=y
+CONFIG_SCHED_SMT=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
+
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_MEM_SOFT_DIRTY=y
+
+CONFIG_RCU_FANOUT=64
+CONFIG_RCU_FANOUT_LEAF=16
+
+CONFIG_FA_DUMP=y
+CONFIG_RELOCATABLE=y
+
+CONFIG_POWERNV_CPUIDLE=y
+CONFIG_PSERIES_CPUIDLE=y
+
+CONFIG_HW_RANDOM_PSERIES=m
+CONFIG_CRYPTO_DEV_NX=y
+CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CRYPTO_DEV_NX_COMPRESS=m
+CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES=m
+CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV=m
+CONFIG_CRYPTO_DEV_VMX=y
+CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
+
+CONFIG_XZ_DEC_POWERPC=y
+
+# HW Virt
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+CONFIG_KVM_GUEST=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=m
+CONFIG_KVM_BOOK3S_64_PR=m
+# CONFIG_KVM_BOOK3S_HV_EXIT_TIMING is not set
+# CONFIG_KVM_EXIT_TIMING is not set
+CONFIG_KVM_XICS=y
+# CONFIG_HCALL_STATS is not set
+CONFIG_PPC_SPLPAR=y
+CONFIG_LPARCFG=y
+#-- active memory sharing
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
+CONFIG_HV_PERF_CTRS=y
+#-- DLPAR memory remove
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+# Power NV
+CONFIG_HVC_CONSOLE=y
+CONFIG_HVCS=m
+CONFIG_HVC_RTAS=y
+CONFIG_HVC_OPAL=y
+CONFIG_I2C_OPAL=m
+CONFIG_RTC_DRV_OPAL=m
+CONFIG_SENSORS_IBMPOWERNV=y
+CONFIG_HW_RANDOM_POWERNV=m
+CONFIG_POWERNV_CPUFREQ=y
+CONFIG_IPMI_POWERNV=m
+CONFIG_RTAS_FLASH=y
+CONFIG_OPAL_PRD=m
+CONFIG_MTD_POWERNV_FLASH=m
+# CONFIG_HOTPLUG_PCI_POWERNV is not set
+# CONFIG_POWERNV_OP_PANEL is not set
+
+# Power 7 and later
+CONFIG_PPC_TRANSACTIONAL_MEM=y
+CONFIG_BLK_DEV_RSXX=m
+CONFIG_CXL=m
+CONFIG_CXLFLASH=m
+CONFIG_IBMEBUS=y
+CONFIG_EHEA=m
+CONFIG_PPC_ICSWX=y
+# CONFIG_PPC_ICSWX_PID is not set
+# CONFIG_PPC_ICSWX_USE_SIGILL is not set
+
+# pSeries
+# CONFIG_SCSI_IBMVFC_TRACE is not set
+CONFIG_IBM_BSR=m
+CONFIG_IBMVETH=m
+CONFIG_PSERIES_ENERGY=m
+# CONFIG_HVC_OLD_HVSI is not set
+CONFIG_SCOM_DEBUGFS=y
+CONFIG_SCANLOG=y
+CONFIG_RTAS_PROC=y
+CONFIG_WATCHDOG_RTAS=m
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_IO_EVENT_IRQ=y
+
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_GEN_RTC_X is not set
+CONFIG_RTC_DRV_GENERIC=y
+# CONFIG_CMDLINE_BOOL is not set
+
+CONFIG_HOTPLUG_PCI_SHPC=m
+CONFIG_HOTPLUG_PCI_RPA=m
+CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
+
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVSCSI=m
+CONFIG_SCSI_IPR=m
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+CONFIG_SCSI_IBMVSCSIS=m
+
+CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_8250 is not set
+
+# Things we might want to review for newer architectures
+# CONFIG_PCIEPORTBUS is not set
+
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_CT65550 is not set
+CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_G=y
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+# CONFIG_FB_MB862XX_LIME is not set
+# CONFIG_FB_MB862XX_I2C is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+
+# CONFIG_SND_SOC is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+CONFIG_CAPI_EICON=y
+
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_NI65 is not set
+# CONFIG_LANCE is not set
+# CONFIG_3C515 is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+# Stuff which wants bus_to_virt() or virt_to_bus()
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_POWERNV=m
+CONFIG_ADB_PMU_LED_DISK=y
+
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_EDAC_CPC925 is not set
+
+
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_LEGACY_SYSFS=y
+
+# CONFIG_AXON_RAM is not set
+
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+
+# CONFIG_MPC5121_ADS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_THERMAL=y
+
+# CONFIG_MEMORY_HOTREMOVE is not set
+
+CONFIG_DMADEVICES=y
+# CONFIG_FSL_DMA is not set
+
+CONFIG_SND_PPC=y
+
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_RAPIDIO is not set
+# CONFIG_FS_ENET is not set
+# CONFIG_UCC_GETH is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_QE is not set
+# CONFIG_I2C_CPM is not set
+
+CONFIG_NET_VENDOR_IBM=y
+
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+
+# CONFIG_PPC_SMLPAR is not set
+
+# CONFIG_MGCOGE is not set
+# CONFIG_GEF_SBC610 is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
+
+# CONFIG_MCU_MPC8349EMITX is not set
+
+# CONFIG_GPIO_XILINX is not set
+
+CONFIG_MSI_BITMAP_SELFTEST=y
+
+CONFIG_RELOCATABLE=y
+
+# CONFIG_HVC_UDBG is not set
+CONFIG_PRINT_STACK_DEPTH=64
+
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_TWL4030_CORE is not set
+
+CONFIG_BLK_DEV_IT8172=m
+
+CONFIG_SIMPLE_GPIO=y
+
+# CONFIG_FSL_PQ_MDIO is not set
+
+# CONFIG_PS3_VRAM is not set
+CONFIG_MDIO_GPIO=m
+CONFIG_SERIAL_OF_PLATFORM=m
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+
+# CONFIG_USB_FHCI_HCD is not set
+# CONFIG_FHCI_DEBUG is not set
+
+# CONFIG_AMIGAONE is not set
+
+CONFIG_DTL=y
+
+CONFIG_MMC_SDHCI_OF=m
+
+# CONFIG_CONSISTENT_SIZE_BOOL is not set
+
+CONFIG_PPC_EMULATED_STATS=y
+
+CONFIG_SWIOTLB=y
+
+CONFIG_PPC_DISABLE_WERROR=y
+# CONFIG_STRICT_MM_TYPECHECKS is not set
+
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XILINX_EMACLITE is not set
+
+CONFIG_GPIO_WM831X=m
+# CONFIG_GPIO_UCB1400 is not set
+# CONFIG_EDAC_MPC85XX is not set
+
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
+# CONFIG_CAN_MSCAN is not set
+# CONFIG_CAN_MPC5XXX is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
+# CONFIG_MMC_SDHCI_OF_HLWD is not set
+
+# CONFIG_MFD_AAT2870_CORE is not set
+
+# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_74XX_MMIO is not set
+
+CONFIG_I2C_MPC=m
+
+# CONFIG_IMA is not set
+# CONFIG_TCG_TPM is not set
+
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_SHA1_PPC is not set
+# CONFIG_CRYPTO_MD5_PPC is not set
+
+# CONFIG_CAN_FLEXCAN is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
+# CONFIG_IBM_EMAC is not set
+# CONFIG_NET_VENDOR_PASEMI is not set
+# CONFIG_NET_VENDOR_TOSHIBA is not set
+CONFIG_IBMVNIC=m
+
+CONFIG_MDIO_OCTEON=m
+
+# CONFIG_OF_UNITTEST is not set
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+# CONFIG_MPIC_MSGR is not set
+# CONFIG_FA_DUMP is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+
+# CONFIG_FAIL_IOMMU is not set
+# CONFIG_SPAPR_TCE_IOMMU is not set
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+# CONFIG_WINDFARM is not set
+
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_FB_SSD1307=m
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_BACKLIGHT_PWM=m
+
+CONFIG_CRYPT_CRC32C_VPMSUM=m
+
+# CONFIG_JUMP_LABEL_FEATURE_CHECKS is not set
+# CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is not set

config-powerpc64le

@@ -0,0 +1,8 @@
+CONFIG_CPU_LITTLE_ENDIAN=y
+
+CONFIG_POWER7_CPU=y
+
+CONFIG_DISABLE_MPROFILE_KERNEL=y
+
+# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
+CONFIG_CHECKPOINT_RESTORE=y

config-powerpc64p7

@@ -0,0 +1,3 @@
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+
+CONFIG_POWER7_CPU=y

config-s390x

@@ -0,0 +1,302 @@
+CONFIG_64BIT=y
+# CONFIG_MARCH_Z900 is not set
+CONFIG_MARCH_Z9_109=y
+# CONFIG_MARCH_Z990 is not set
+
+CONFIG_NR_CPUS=64
+CONFIG_COMPAT=y
+
+# See bug 496596
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# See bug 496605
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+CONFIG_LOG_BUF_SHIFT=16
+
+CONFIG_IRQ_DOMAIN_DEBUG=y
+
+#
+# I/O subsystem configuration
+#
+CONFIG_QDIO=m
+
+#
+# Misc
+#
+CONFIG_IPL=y
+CONFIG_PFAULT=y
+CONFIG_SHARED_KERNEL=y
+CONFIG_CMM=m
+# CONFIG_NETIUCV is not set
+CONFIG_SMSGIUCV=m
+CONFIG_CRASH_DUMP=y
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ZFCP=m
+CONFIG_CCW=y
+
+#
+# S/390 block device drivers
+#
+CONFIG_DCSSBLK=m
+CONFIG_BLK_DEV_XPRAM=m
+CONFIG_DASD=m
+CONFIG_DASD_PROFILE=y
+CONFIG_DASD_ECKD=m
+CONFIG_DASD_FBA=m
+CONFIG_DASD_DIAG=m
+CONFIG_DASD_EER=y
+
+#
+# S/390 character device drivers
+#
+CONFIG_TN3270=y
+CONFIG_TN3270_CONSOLE=y
+CONFIG_TN3215=y
+CONFIG_TN3215_CONSOLE=y
+CONFIG_CCW_CONSOLE=y
+CONFIG_SCLP_TTY=y
+CONFIG_SCLP_CONSOLE=y
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_SCLP_ASYNC=m
+CONFIG_SCLP_ASYNC_ID="000000000"
+CONFIG_SCLP_OFB=y
+CONFIG_S390_TAPE=m
+CONFIG_S390_TAPE_3590=m
+
+CONFIG_APPLDATA_BASE=y
+CONFIG_APPLDATA_MEM=m
+CONFIG_APPLDATA_OS=m
+CONFIG_APPLDATA_NET_SUM=m
+CONFIG_TN3270_TTY=y
+CONFIG_TN3270_FS=m
+
+
+#
+# S/390 tape interface support
+#
+
+#
+# S/390 tape hardware support
+#
+CONFIG_S390_TAPE_34XX=m
+
+# CONFIG_SLIP is not set
+
+#
+# Token Ring devices
+#
+CONFIG_TR=y
+CONFIG_NETCONSOLE=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# S/390 network device drivers
+#
+CONFIG_LCS=m
+CONFIG_CTC=m
+CONFIG_IUCV=m
+CONFIG_QETH=m
+CONFIG_QETH_IPV6=y
+CONFIG_CCWGROUP=m
+
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_B44 is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_OSF_PARTITION is not set
+CONFIG_IBM_PARTITION=y
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+
+
+#
+# S390 crypto hw
+#
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_CRC32_S390=m
+
+#
+# Kernel hacking
+#
+
+#
+# S390 specific stack options; needs gcc 3.5 so off for now
+#
+CONFIG_PACK_STACK=y
+CONFIG_CHECK_STACK=y
+
+CONFIG_DIAG288_WATCHDOG=m
+CONFIG_VMLOGRDR=m
+CONFIG_MONREADER=m
+
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MII is not set
+
+
+CONFIG_STACK_GUARD=256
+CONFIG_CMM_IUCV=y
+
+# CONFIG_CPU_IDLE is not set
+
+CONFIG_S390_HYPFS_FS=y
+
+CONFIG_MONWRITER=m
+CONFIG_ZCRYPT=m
+
+CONFIG_AFIUCV=m
+CONFIG_S390_PRNG=m
+
+CONFIG_S390_VMUR=m
+
+# CONFIG_THERMAL is not set
+
+CONFIG_CTCM=m
+CONFIG_QETH_L2=m
+CONFIG_QETH_L3=m
+
+CONFIG_KVM=m
+# CONFIG_KVM_S390_UCONTROL is not set
+CONFIG_S390_GUEST=y
+CONFIG_S390_GUEST_OLD_TRANSPORT=y
+CONFIG_VIRTIO_CONSOLE=y
+
+
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
+CONFIG_CHSC_SCH=m
+
+# drivers/isdn/hardware/mISDN/hfcmulti.c:5255:2: error: #error "not running on big endian machines now"
+# CONFIG_MISDN_HFCMULTI is not set
+
+CONFIG_HVC_IUCV=y
+
+CONFIG_RCU_FANOUT=64
+CONFIG_RCU_FANOUT_LEAF=16
+
+# CONFIG_SUSPEND is not set
+
+CONFIG_SMSGIUCV_EVENT=m
+
+# CONFIG_PREEMPT_TRACER is not set
+
+CONFIG_VMCP=y
+
+
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_BOOK=y
+CONFIG_SCHED_TOPOLOGY=y
+# CONFIG_NUMA is not set
+
+# CONFIG_WARN_DYNAMIC_STACK is not set
+
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+CONFIG_SCM_BUS=y
+CONFIG_EADM_SCH=m
+CONFIG_SCM_BLOCK=m
+CONFIG_SCM_BLOCK_CLUSTER_WRITE=y
+# CONFIG_S390_PTDUMP is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+CONFIG_PCI=y
+CONFIG_PCI_NR_FUNCTIONS=64
+CONFIG_PCI_NR_MSI=256
+CONFIG_HOTPLUG_PCI_CPCI=y
+CONFIG_HOTPLUG_PCI_SHPC=y
+CONFIG_HOTPLUG_PCI_S390=y
+
+# CONFIG_NEW_LEDS is not set
+# CONFIG_HID is not set
+# CONFIG_MTD is not set
+
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_PARPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_FB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_FCOE is not set
+# CONFIG_FUSION is not set
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_SERIO is not set
+
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_STAGING is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_SOUND is not set
+# CONFIG_DW_DMAC is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_SMBUS is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_PTP_1588_CLOCK is not set
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
+# CONFIG_BCMA is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_VX855 is not set
+
+# CONFIG_PHYLIB is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_SH_ETH is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_IEEE802154_DRIVERS is not set
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_FMC is not set
+# CONFIG_OF is not set

config-x86-32-generic

@@ -0,0 +1,215 @@
+# CONFIG_64BIT is not set
+
+# CONFIG_X86_32_NON_STANDARD is not set
+
+# CONFIG_X86_GOLDFISH is not set
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_RDC321X is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+CONFIG_M686=y
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_STA2X11 is not set
+
+CONFIG_NR_CPUS=32
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_PPRO_FENCE is not set
+
+CONFIG_TOSHIBA=m
+
+CONFIG_SONYPI=m
+CONFIG_SONYPI_COMPAT=y
+
+# CONFIG_NUMA is not set
+
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ZONE_DMA=y
+
+# CONFIG_MATH_EMULATION is not set
+
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
+
+CONFIG_FB_SSD1307=m
+
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_GOANY=y
+
+CONFIG_IBM_ASM=m
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
+
+
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+# CONFIG_X86_GX_SUSPMOD is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+# e_powersaver is dangerous
+# CONFIG_X86_E_POWERSAVER is not set
+
+
+# CONFIG_4KSTACKS is not set
+
+CONFIG_PCI_DIRECT=y
+
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+
+# SHPC has half-arsed PCI probing, which makes it load on too many systems
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+
+CONFIG_SCx200_ACB=m
+
+# CONFIG_X86_REBOOTFIXUPS is not set
+
+CONFIG_PC8736x_GPIO=m
+# CONFIG_NSC_GPIO is not set
+CONFIG_GPIO_SCH=m
+
+CONFIG_HW_RANDOM_GEODE=m
+
+CONFIG_TC1100_WMI=m
+
+CONFIG_IB700_WDT=m
+
+CONFIG_PHYSICAL_ALIGN=0x400000
+CONFIG_PHYSICAL_START=0x400000
+
+# CONFIG_KEXEC_JUMP is not set
+
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_TWOFISH_586=m
+
+CONFIG_VIDEO_CAFE_CCIC=m
+
+
+CONFIG_MTD_NAND_CAFE=m
+
+CONFIG_LBDAF=y
+
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+
+
+CONFIG_OLPC=y
+CONFIG_BATTERY_OLPC=y
+CONFIG_MOUSE_PS2_OLPC=y
+CONFIG_OLPC_XO1_PM=y
+CONFIG_OLPC_XO15_SCI=y
+CONFIG_OLPC_XO1_RTC=y
+CONFIG_OLPC_XO1_SCI=y
+# CONFIG_ALIX is not set
+# staging
+# CONFIG_FB_OLPC_DCON is not set
+
+# CONFIG_SPARSE_IRQ is not set
+
+CONFIG_RCU_FANOUT=32
+
+# CONFIG_X86_ANCIENT_MCE is not set
+
+
+CONFIG_I2C_PXA=m
+
+# CONFIG_INTEL_TXT is not set
+
+CONFIG_GEODE_WDT=m
+CONFIG_CS5535_MFGPT=m
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+
+CONFIG_LEDS_INTEL_SS4200=m
+
+CONFIG_OLPC_XO1=m
+CONFIG_XO1_RFKILL=m
+
+CONFIG_X86_32_IRIS=m
+
+CONFIG_POWER_RESET_GPIO=y
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+
+
+
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP_OF=m
+CONFIG_SERIAL_OF_PLATFORM=m
+CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
+# CONFIG_MMC_SDHCI_OF is not set
+
+# CONFIG_X86_INTEL_MID is not set
+# CONFIG_X86_INTEL_QUARK is not set
+
+CONFIG_MFD_CS5535=m
+# CONFIG_MFD_SYSCON is not set
+
+# I2O enabled only for 32-bit x86, disabled for PAE kernel
+CONFIG_I2O=m
+
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_BACKLIGHT_PWM=m
+
+# CONFIG_EDAC_SBRIDGE is not set
+
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_GEOS is not set
+# CONFIG_NET5501 is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_GPIO_SODAVILLE is not set
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_BACKLIGHT_OT200 is not set
+
+# CONFIG_MLX5_INFINIBAND is not set
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PINCTRL_BCM281XX is not set
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_QCOM is not set
+# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
+# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
+# CONFIG_KEYBOARD_BCM is not set

config-x86-generic

@@ -0,0 +1,605 @@
+CONFIG_UID16=y
+
+CONFIG_X86_EXTENDED_PLATFORM=y
+
+CONFIG_X86_GENERIC=y
+
+# CONFIG_X86_LEGACY_VM86 is not set
+
+CONFIG_HPET=y
+CONFIG_HPET_TIMER=y
+# CONFIG_HPET_MMAP is not set
+
+CONFIG_I8K=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+
+CONFIG_PERF_EVENTS_AMD_POWER=m
+CONFIG_PERF_EVENTS_INTEL_UNCORE=m
+CONFIG_PERF_EVENTS_INTEL_RAPL=m
+CONFIG_PERF_EVENTS_CSTATE=m
+CONFIG_PERF_EVENTS_INTEL_CSTATE=m
+
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
+CONFIG_EDD=m
+# CONFIG_EDD_OFF is not set
+
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+
+# CONFIG_NET_SB1000 is not set
+
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_X86_PM_TIMER=y
+
+CONFIG_X86_INTEL_MPX=y
+
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+# CONFIG_EFI_VARS is not set
+CONFIG_EFIVAR_FS=y
+# CONFIG_EFI_VARS_PSTORE is not set
+# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
+CONFIG_EFI_PCDP=y
+CONFIG_FB_EFI=y
+CONFIG_EARLY_PRINTK_EFI=y
+CONFIG_EFI_RUNTIME_MAP=y
+# CONFIG_EFI_FAKE_MEMMAP is not set
+# CONFIG_EFI_BOOTLOADER_CONTROL is not set
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# needs FB_SIMPLE to work correctly
+# CONFIG_X86_SYSFB is not set
+
+# FIXME: 32bit only?
+# CONFIG_FB_N411 is not set
+
+CONFIG_INTEL_IOMMU=y
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_SVM=y
+CONFIG_SCSI_ADVANSYS=m
+
+CONFIG_CAPI_EICON=y
+
+#
+# Kernel debugging
+#
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+CONFIG_MMIOTRACE=y
+# CONFIG_MMIOTRACE_TEST is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_DEBUG_WX=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
+CONFIG_ACPI_CONFIGFS=m
+# FIXME: Next two are deprecated. Remove them when they disappear upstream
+# CONFIG_ACPI_PROCFS_POWER is not set
+CONFIG_PNPACPI=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+# CONFIG_ACPI_APEI_EINJ is not set
+CONFIG_DPTF_POWER=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+CONFIG_ACPI_BGRT=y
+# CONFIG_ACPI_EXTLOG is not set
+# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
+CONFIG_ACPI_TABLE_UPGRADE=y
+
+CONFIG_INTEL_SOC_PMIC=y
+CONFIG_PMIC_OPREGION=y
+CONFIG_CRC_PMIC_OPREGION=y
+CONFIG_XPOWER_PMIC_OPREGION=y
+CONFIG_BXT_WC_PMIC_OPREGION=y
+CONFIG_GPIO_CRYSTAL_COVE=y
+CONFIG_AXP288_ADC=y
+CONFIG_AXP288_FUEL_GAUGE=y
+CONFIG_PWM_CRC=y
+
+
+CONFIG_X86_INTEL_PSTATE=y
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ_CPB=y
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_AMD_FREQ_SENSITIVITY=m
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+
+#
+# various x86 specific drivers
+#
+CONFIG_NVRAM=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_CCP=y
+CONFIG_CRYPTO_DEV_CCP_DD=m
+CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
+CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
+CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
+CONFIG_CRYPTO_DEV_QAT_C3XXX=m
+CONFIG_CRYPTO_DEV_QAT_C62X=m
+CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
+CONFIG_CRYPTO_DEV_QAT_C62XVF=m
+
+CONFIG_GENERIC_ISA_DMA=y
+
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_BIOS=y
+CONFIG_VMD=m
+
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+
+CONFIG_BLK_DEV_AMD74XX=y
+
+# I2C_ACPI casues I2C to be built in.  This should probably be fixed.
+CONFIG_I2C=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_ISMT=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
+
+#rhbz 997149
+# CONFIG_DELL_RBU is not set
+CONFIG_DCDBAS=m
+
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
+CONFIG_EDAC_AMD64=m
+CONFIG_EDAC_AMD76X=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_E7XXX=m
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82860=m
+CONFIG_EDAC_I82875P=m
+CONFIG_EDAC_I82975X=m
+CONFIG_EDAC_I3000=m
+CONFIG_EDAC_I3200=m
+CONFIG_EDAC_I5000=m
+CONFIG_EDAC_I5100=m
+CONFIG_EDAC_I5400=m
+CONFIG_EDAC_I7300=m
+CONFIG_EDAC_I7CORE=m
+CONFIG_EDAC_R82600=m
+CONFIG_EDAC_X38=m
+CONFIG_EDAC_DECODE_MCE=m
+CONFIG_EDAC_LEGACY_SYSFS=y
+CONFIG_EDAC_IE31200=m
+
+CONFIG_SCHED_MC=y
+
+CONFIG_TCG_INFINEON=m
+CONFIG_TCG_CRB=m
+
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+
+# CONFIG_COMPAT_VDSO is not set
+
+CONFIG_X86_PLATFORM_DEVICES=y
+
+CONFIG_AMILO_RFKILL=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_ASUS_WIRELESS=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_DELL_SMBIOS=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_RBTN=m
+CONFIG_CHROMEOS_LAPTOP=m
+CONFIG_CHROMEOS_PSTORE=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_FUJITSU_TABLET=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_INTEL_VBTN=m
+CONFIG_INTEL_HID_EVENT=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_TOPSTAR_LAPTOP=m
+
+CONFIG_ACPI_WMI=m
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_ALIENWARE_WMI=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_HP_WIRELESS=m
+CONFIG_HP_WMI=m
+# CONFIG_INTEL_SCU_IPC is not set
+# CONFIG_INTEL_PMC_IPC is not set
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_DELL_SMO8800=m
+CONFIG_EEEPC_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+CONFIG_XO15_EBOOK=m
+CONFIG_INTEL_RST=m
+CONFIG_INTEL_SMARTCONNECT=y
+CONFIG_PVPANIC=m
+
+# CONFIG_TOUCHSCREEN_INTEL_MID is not set
+CONFIG_TOUCHSCREEN_GOODIX=m
+CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
+
+# CONFIG_SMSC37B787_WDT is not set
+CONFIG_VIA_WDT=m
+CONFIG_IE6XX_WDT=m
+
+CONFIG_PROC_VMCORE=y
+
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_DEVICE_ASSIGNMENT=y
+CONFIG_LGUEST=m
+# CONFIG_LGUEST_GUEST is not set
+
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_PARAVIRT_TIME_ACCOUNTING=y
+# CONFIG_PARAVIRT_DEBUG is not set
+
+# PARAVIRT_SPINLOCKS has a 5% perf hit on native hw (see kconfig)
+# CONFIG_PARAVIRT_SPINLOCKS is not set
+
+CONFIG_KVM_GUEST=y
+CONFIG_KVM_MMU_AUDIT=y # default $x would be nice...
+# CONFIG_KVM_DEBUG_FS is not set
+
+CONFIG_XEN=y
+# CONFIG_XEN_DEBUG is not set
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_SAVE_RESTORE=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_XEN_WDT=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_DEBUG_FS=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
+CONFIG_XEN_SELFBALLOONING=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_ACPI_PROCESSOR=m
+CONFIG_XEN_SCSI_FRONTEND=m
+CONFIG_XEN_SCSI_BACKEND=m
+CONFIG_XEN_SYMS=y
+
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_PXA2XX=m
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
+# CONFIG_DRM_PANEL_LG_LG4573 is not set
+# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
+
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+
+CONFIG_THINKPAD_ACPI=m
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+
+CONFIG_MACINTOSH_DRIVERS=y
+
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+
+CONFIG_INTEL_IOATDMA=m
+CONFIG_INTEL_IDMA64=m
+
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_I5500=m
+CONFIG_SENSORS_DELL_SMM=m
+
+# CONFIG_CPA_DEBUG is not set
+
+CONFIG_HP_WATCHDOG=m
+CONFIG_NV_TCO=m
+CONFIG_SP5100_TCO=m
+
+# CONFIG_NO_BOOTMEM is not set
+
+# CONFIG_MEMTEST is not set
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_MAXSMP is not set
+
+
+CONFIG_HP_ILO=m
+
+CONFIG_BACKLIGHT_APPLE=m
+
+CONFIG_X86_PMEM_LEGACY=y
+
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+
+# CONFIG_CMDLINE_BOOL is not set
+
+
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+
+
+# CONFIG_IOMMU_STRESS is not set
+
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_INJECT=m
+
+CONFIG_SFI=y
+
+CONFIG_I2C_SCMI=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+
+CONFIG_X86_DECODER_SELFTEST=y
+
+CONFIG_ACPI_CMPC=m
+CONFIG_MSI_WMI=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_TOSHIBA_HAPS=m
+CONFIG_TOSHIBA_WMI=m
+
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_LPC_SCH=m
+CONFIG_LPC_ICH=m
+
+CONFIG_GPIO_ICH=m
+# CONFIG_GPIO_LYNXPOINT is not set
+# CONFIG_GPIO_F7188X is not set
+# CONFIG_GPIO_104_IDI_48 is not set
+
+# These should all go away with IC2_ACPI is fixed
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_AXP20X is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_LP8788 is not set
+
+CONFIG_PCI_CNB20LE_QUIRK=y
+
+CONFIG_ACPI_EC_DEBUGFS=m
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+
+CONFIG_INTEL_IDLE=y
+
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+CONFIG_F71808E_WDT=m
+CONFIG_HPWDT_NMI_DECODING=y
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_GPIO_INTEL_MID is not set
+CONFIG_PCH_DMA=m
+CONFIG_INTEL_IPS=m
+CONFIG_INTEL_PMC_CORE=y
+# CONFIG_IBM_RTL is not set
+
+CONFIG_VIDEO_VIA_CAMERA=m
+
+CONFIG_X86_RESERVE_LOW=64
+
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+
+CONFIG_PCH_GBE=m
+CONFIG_PCH_PHUB=m
+
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_SERPENT_SSE2_586=m
+CONFIG_CRYPTO_CRC32_PCLMUL=m
+
+CONFIG_HP_ACCEL=m
+
+CONFIG_SURFACE_PRO3_BUTTON=m
+CONFIG_INTEL_PUNIT_IPC=m
+
+# CONFIG_RAPIDIO is not set
+
+CONFIG_SCHED_SMT=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR_STRONG=y
+CONFIG_RELOCATABLE=y
+CONFIG_RANDOMIZE_BASE=y
+
+CONFIG_HYPERV=m
+CONFIG_HYPERV_UTILS=m
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HYPERV_NET=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_HYPERV_BALLOON=m
+CONFIG_FB_HYPERV=m
+CONFIG_HYPERV_KEYBOARD=m
+# This is x86_64 only, but we'll lump it here anyway
+CONFIG_PCI_HYPERV=m
+
+# Depends on HOTPLUG_PCI_PCIE
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+
+CONFIG_DRM_GMA500=m
+# CONFIG_DRM_GMA600 is not set
+CONFIG_DRM_GMA3600=y
+
+CONFIG_RCU_FANOUT_LEAF=16
+
+CONFIG_INTEL_MEI=m
+CONFIG_INTEL_MEI_ME=m
+CONFIG_INTEL_MEI_TXE=m
+CONFIG_INTEL_MEI_WDT=m
+
+CONFIG_NFC_MEI_PHY=m
+CONFIG_NFC_PN544_MEI=m
+CONFIG_NFC_MICROREAD_MEI=m
+
+# Maybe enable in debug kernels?
+# CONFIG_DEBUG_ENTRY is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+# CONFIG_X86_GOLDFISH is not set
+
+CONFIG_X86_INTEL_LPSS=y
+CONFIG_IDMA64=m
+
+# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
+# CONFIG_X86_INTEL_MID is not set
+# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
+
+CONFIG_MFD_INTEL_LPSS_ACPI=m
+CONFIG_MFD_INTEL_LPSS_PCI=m
+
+CONFIG_IOSF_MBI=m
+# CONFIG_IOSF_MBI_DEBUG is not set
+CONFIG_PWM_LPSS=m
+CONFIG_PWM_LPSS_PCI=m
+CONFIG_PWM_LPSS_PLATFORM=m
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BAYTRAIL=y
+CONFIG_PINCTRL_CHERRYVIEW=y
+# CONFIG_PINCTRL_AMD is not set
+CONFIG_PINCTRL_SUNRISEPOINT=m
+CONFIG_PINCTRL_BROXTON=m
+
+# I have no idea why this is x86-specific
+CONFIG_E1000E_HWTS=y
+
+#baytrail/cherrytrail stuff
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_SOC_BUTTON_ARRAY=m
+CONFIG_SND_SOC_INTEL_SST=m
+CONFIG_SND_SOC_INTEL_SST_ACPI=m
+CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BAYTRAIL=m
+CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH=m
+CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
+CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH=m
+CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
+CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
+CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
+CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
+CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
+CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m
+CONFIG_SND_SOC_AC97_CODEC=m
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SUN4I_CODEC is not set
+# CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SUN4I_I2S is not set
+
+CONFIG_INTEL_POWERCLAMP=m
+CONFIG_X86_PKG_TEMP_THERMAL=m
+CONFIG_INTEL_SOC_DTS_THERMAL=m
+CONFIG_INT340X_THERMAL=m
+CONFIG_INTEL_RAPL=m
+CONFIG_INTEL_PCH_THERMAL=m
+CONFIG_INT3406_THERMAL=m
+
+CONFIG_VMWARE_VMCI=m
+CONFIG_VMWARE_VMCI_VSOCKETS=m
+CONFIG_MOUSE_PS2_VMMOUSE=y
+
+CONFIG_XZ_DEC_X86=y
+
+CONFIG_MPILIB=y
+
+CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE=y
+CONFIG_EFI_SIGNATURE_LIST_PARSER=y
+
+# CONFIG_KEXEC_FILE is not set
+# CONFIG_KEXEC_VERIFY_SIG is not set
+
+CONFIG_MODULE_SIG_UEFI=y
+
+CONFIG_VMXNET3=m
+CONFIG_FUJITSU_ES=m
+CONFIG_VFIO_PCI_VGA=y
+
+CONFIG_PCH_CAN=m
+
+# CONFIG_X86_DEBUG_FPU is not set
+# CONFIG_PUNIT_ATOM_DEBUG is not set
+# CONFIG_AMD_MCE_INJ is not set

config-x86_64-generic

@@ -0,0 +1,242 @@
+CONFIG_64BIT=y
+
+# CONFIG_X86_X32 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+CONFIG_GENERIC_CPU=y
+
+# CONFIG_X86_VSMP is not set
+CONFIG_X86_UV=y
+CONFIG_UV_MMTIMER=m
+CONFIG_NUMA=y
+CONFIG_ACPI_NUMA=y
+CONFIG_AMD_NUMA=y
+CONFIG_X86_64_ACPI_NUMA=y
+CONFIG_ACPI_NFIT=m
+# CONFIG_ACPI_NFIT_DEBUG is not set
+# CONFIG_NUMA_EMU is not set
+CONFIG_X86_NUMACHIP=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+
+# https://lists.fedoraproject.org/pipermail/kernel/2013-November/004601.html
+CONFIG_NR_CPUS=1024
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_PHYSICAL_ALIGN=0x1000000
+
+# https://lists.fedoraproject.org/pipermail/kernel/2013-December/004753.html
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+
+CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
+
+CONFIG_RANDOMIZE_MEMORY=y
+# enable the 32-bit entry point for Baytrail
+CONFIG_EFI_MIXED=y
+
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+
+CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_STATS=y
+CONFIG_AMD_IOMMU_V2=m
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_SWIOTLB=y
+# CONFIG_CALGARY_IOMMU is not set
+# CONFIG_GART_IOMMU is not set
+
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_MEM_SOFT_DIRTY=y
+
+CONFIG_KEXEC_JUMP=y
+CONFIG_KEXEC_FILE=y
+CONFIG_KEXEC_VERIFY_SIG=y
+CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
+
+CONFIG_ACPI_HOTPLUG_MEMORY=y
+
+# CONFIG_INTEL_SCU_IPC is not set
+
+CONFIG_SCIF_BUS=m
+CONFIG_SCIF=m
+
+CONFIG_INTEL_MIC_HOST=m
+CONFIG_INTEL_MIC_CARD=m
+CONFIG_INTEL_MIC_BUS=m
+CONFIG_INTEL_MIC_X100_DMA=m
+CONFIG_MIC_COSM=m
+
+CONFIG_VOP_BUS=m
+CONFIG_VOP=m
+
+# SHPC has half-arsed PCI probing, which makes it load on too many systems
+CONFIG_HOTPLUG_PCI_SHPC=m
+
+# CONFIG_CRYPTO_SHA1_MB is not set
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
+CONFIG_CRYPTO_TWOFISH_X86_64=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256_SSSE3=m
+CONFIG_CRYPTO_SHA512_SSSE3=m
+CONFIG_CRYPTO_SHA256_MB=m
+CONFIG_CRYPTO_SHA512_MB=m
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+CONFIG_CRYPTO_CAMELLIA_X86_64=m
+CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
+CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
+CONFIG_CRYPTO_CAST5_AVX_X86_64=m
+CONFIG_CRYPTO_CAST6_AVX_X86_64=m
+CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
+CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
+CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
+CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
+CONFIG_CRYPTO_DES3_EDE_X86_64=m
+CONFIG_CRYPTO_POLY1305_X86_64=m
+CONFIG_CRYPTO_CHACHA20_X86_64=m
+# staging crypto
+# CONFIG_CRYPTO_SKEIN is not set
+
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+
+CONFIG_EDAC_AMD64=m
+# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
+CONFIG_EDAC_SBRIDGE=m
+CONFIG_EDAC_SKX=m
+
+# CONFIG_PC8736x_GPIO is not set
+
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+# CONFIG_MOVABLE_NODE is not set
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
+# CONFIG_ARCH_MEMORY_PROBE is not set
+CONFIG_MEMORY_HOTREMOVE=y
+# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set 
+
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+
+CONFIG_SGI_IOC4=m
+CONFIG_SGI_XP=m
+CONFIG_SGI_GRU=m
+# CONFIG_SGI_GRU_DEBUG is not set
+
+# CONFIG_VIDEO_CAFE_CCIC is not set
+
+# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_SYS_HYPERVISOR=y
+# CONFIG_XEN_MCE_LOG is not set
+# CONFIG_XEN_STUB is not set
+CONFIG_XEN_PVH=y
+CONFIG_XEN_512GB=y
+
+CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+
+CONFIG_FRAME_WARN=2048
+
+CONFIG_NODES_SHIFT=9
+
+CONFIG_DIRECT_GBPAGES=y
+
+CONFIG_X86_MPPARSE=y
+
+CONFIG_I7300_IDLE=m
+CONFIG_IRQ_REMAP=y
+
+CONFIG_X86_X2APIC=y
+CONFIG_SPARSE_IRQ=y
+
+CONFIG_RCU_FANOUT=64
+
+CONFIG_INTEL_TXT=y
+
+# CONFIG_OF is not set
+
+CONFIG_FUNCTION_GRAPH_TRACER=y
+
+CONFIG_I7300_IDLE=m
+
+# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
+CONFIG_CHECKPOINT_RESTORE=y
+
+# Should be 32bit only, but lacks KConfig depends
+# CONFIG_XO15_EBOOK is not set
+
+CONFIG_THUNDERBOLT=m
+
+CONFIG_NTB=m
+CONFIG_NTB_NETDEV=m
+CONFIG_NTB_AMD=m
+CONFIG_NTB_INTEL=m
+CONFIG_NTB_PINGPONG=m
+CONFIG_NTB_PERF=m
+CONFIG_NTB_TOOL=m
+CONFIG_NTB_TRANSPORT=m
+
+# 10GigE
+#
+CONFIG_SFC=m
+CONFIG_SFC_MCDI_MON=y
+CONFIG_SFC_SRIOV=y
+CONFIG_SFC_MTD=y
+# CONFIG_SFC_MCDI_LOGGING is not set
+# Override MTD stuff because SFC_MTD needs it
+CONFIG_MTD_BLOCK=m
+
+CONFIG_HSA_AMD=m
+
+CONFIG_LIBNVDIMM=m
+CONFIG_BTT=y
+CONFIG_ND_BTT=m
+CONFIG_ND_BLK=m
+
+CONFIG_MDIO_OCTEON=m
+
+CONFIG_NO_HZ_FULL=y
+# CONFIG_NO_HZ_IDLE is not set
+# CONFIG_NO_HZ_FULL_ALL is not set
+# CONFIG_NO_HZ_FULL_SYSIDLE is not set
+# CONFIG_CONTEXT_TRACKING_FORCE is not set
+
+# Turn on CONFIG_CMA for THP
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+
+# Changes for persistent memory devices
+# ZONE_DMA and ZONE_DEVICE can now co-exist
+CONFIG_ZONE_DMA=y
+CONFIG_ZONE_DEVICE=y
+CONFIG_NVDIMM_PFN=y
+CONFIG_NVDIMM_DAX=y
+CONFIG_ND_PFN=m
+
+CONFIG_DEV_DAX=m
+CONFIG_DEV_DAX_PMEM=m
+
+# Staging
+CONFIG_STAGING_RDMA=y
+CONFIG_INFINIBAND_HFI1=m
+# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
+CONFIG_HFI1_VERBS_31BIT_PSN=y
+# CONFIG_SDMA_VERBOSITY is not set

crash-driver.patch

@@ -0,0 +1,725 @@
+From 3fbd61fbbbfa7ae15cd3f3e2ff7a97e106be2b43 Mon Sep 17 00:00:00 2001
+From: Dave Anderson <anderson@redhat.com>
+Date: Tue, 26 Nov 2013 12:42:46 -0500
+Subject: [PATCH] crash-driver
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ arch/arm/include/asm/crash-driver.h     |   6 ++
+ arch/arm64/include/asm/crash-driver.h   |   6 ++
+ arch/ia64/include/asm/crash-driver.h    |  90 ++++++++++++++++++++++
+ arch/ia64/kernel/ia64_ksyms.c           |   3 +
+ arch/powerpc/include/asm/crash-driver.h |   6 ++
+ arch/s390/include/asm/crash-driver.h    |  60 +++++++++++++++
+ arch/s390/mm/maccess.c                  |   2 +
+ arch/x86/include/asm/crash-driver.h     |   6 ++
+ drivers/char/Kconfig                    |   3 +
+ drivers/char/Makefile                   |   2 +
+ drivers/char/crash.c                    | 128 ++++++++++++++++++++++++++++++++
+ include/asm-generic/crash-driver.h      |  72 ++++++++++++++++++
+ 12 files changed, 384 insertions(+)
+ create mode 100644 arch/arm/include/asm/crash-driver.h
+ create mode 100644 arch/arm64/include/asm/crash-driver.h
+ create mode 100644 arch/ia64/include/asm/crash-driver.h
+ create mode 100644 arch/powerpc/include/asm/crash-driver.h
+ create mode 100644 arch/s390/include/asm/crash-driver.h
+ create mode 100644 arch/x86/include/asm/crash-driver.h
+ create mode 100644 drivers/char/crash.c
+ create mode 100644 include/asm-generic/crash-driver.h
+
+diff --git a/arch/arm/include/asm/crash-driver.h b/arch/arm/include/asm/crash-driver.h
+new file mode 100644
+index 0000000..06e7ae9
+--- /dev/null
++++ b/arch/arm/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _ARM_CRASH_H
++#define _ARM_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _ARM_CRASH_H */
+diff --git a/arch/arm64/include/asm/crash-driver.h b/arch/arm64/include/asm/crash-driver.h
+new file mode 100644
+index 0000000..43b26da
+--- /dev/null
++++ b/arch/arm64/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _ARM64_CRASH_H
++#define _ARM64_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _ARM64_CRASH_H */
+diff --git a/arch/ia64/include/asm/crash-driver.h b/arch/ia64/include/asm/crash-driver.h
+new file mode 100644
+index 0000000..404bcb9
+--- /dev/null
++++ b/arch/ia64/include/asm/crash-driver.h
+@@ -0,0 +1,90 @@
++#ifndef _ASM_IA64_CRASH_H
++#define _ASM_IA64_CRASH_H
++
++/*
++ * linux/include/asm-ia64/crash-driver.h
++ *
++ * Copyright (c) 2004 Red Hat, Inc. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2, or (at your option)
++ * any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifdef __KERNEL__
++
++#include <linux/efi.h>
++#include <linux/mm.h>
++#include <asm/mmzone.h>
++
++static inline void *
++map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	u32 type;
++
++	if (REGION_NUMBER(offset) == 5) {
++		char byte;
++
++		if (__get_user(byte, (char *)offset) == 0)
++			return (void *)offset;
++		else
++			return NULL;
++	}
++
++	switch (type = efi_mem_type(offset))
++	{
++	case EFI_LOADER_CODE:
++	case EFI_LOADER_DATA:
++	case EFI_BOOT_SERVICES_CODE:
++	case EFI_BOOT_SERVICES_DATA:
++	case EFI_CONVENTIONAL_MEMORY:
++		break;
++
++	default:
++		printk(KERN_INFO
++		    "crash memory driver: invalid memory type for %lx: %d\n",
++			offset, type);
++		return NULL;
++	}
++
++	pfn = offset >> PAGE_SHIFT;
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++			"crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	page = pfn_to_page(pfn);
++
++	if (!page->virtual) {
++		printk(KERN_INFO
++		    "crash memory driver: offset: %lx page: %lx page->virtual: NULL\n",
++			offset, (unsigned long)page);
++		return NULL;
++	}
++
++	return (page->virtual + (offset & (PAGE_SIZE-1)));
++}
++
++static inline void unmap_virtual(struct page *page)
++{
++	return;
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* _ASM_IA64_CRASH_H */
+diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
+index 0967310..e888878 100644
+--- a/arch/ia64/kernel/ia64_ksyms.c
++++ b/arch/ia64/kernel/ia64_ksyms.c
+@@ -84,6 +84,9 @@ EXPORT_SYMBOL(ia64_save_scratch_fpregs);
+ #include <asm/unwind.h>
+ EXPORT_SYMBOL(unw_init_running);
+ 
++#include <linux/efi.h>
++EXPORT_SYMBOL_GPL(efi_mem_type);
++
+ #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
+ extern void esi_call_phys (void);
+ EXPORT_SYMBOL_GPL(esi_call_phys);
+diff --git a/arch/powerpc/include/asm/crash-driver.h b/arch/powerpc/include/asm/crash-driver.h
+new file mode 100644
+index 0000000..50092d9
+--- /dev/null
++++ b/arch/powerpc/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _PPC64_CRASH_H
++#define _PPC64_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _PPC64_CRASH_H */
+diff --git a/arch/s390/include/asm/crash-driver.h b/arch/s390/include/asm/crash-driver.h
+new file mode 100644
+index 0000000..552be5e
+--- /dev/null
++++ b/arch/s390/include/asm/crash-driver.h
+@@ -0,0 +1,60 @@
++#ifndef _S390_CRASH_H
++#define _S390_CRASH_H
++
++#ifdef __KERNEL__
++
++#include <linux/mm.h>
++#include <linux/highmem.h>
++
++/*
++ * For swapped prefix pages get bounce buffer using xlate_dev_mem_ptr()
++ */
++static inline void *map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	void *vaddr;
++
++	vaddr = xlate_dev_mem_ptr(offset);
++	pfn = ((unsigned long) vaddr) >> PAGE_SHIFT;
++	if ((unsigned long) vaddr != offset)
++		page = pfn_to_page(pfn);
++	else
++		page = NULL;
++
++	if (!page_is_ram(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
++		return NULL;
++	}
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	*pp = page;
++	return vaddr;
++}
++
++/*
++ * Free bounce buffer if necessary
++ */
++static inline void unmap_virtual(struct page *page)
++{
++	void *vaddr;
++
++	if (page) {
++		/*
++		 * Because for bounce buffers vaddr will never be 0
++		 * unxlate_dev_mem_ptr() will always free the bounce buffer.
++		 */
++		vaddr = (void *)(page_to_pfn(page) << PAGE_SHIFT);
++		unxlate_dev_mem_ptr(0, vaddr);
++	}
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* _S390_CRASH_H */
+diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
+index 792f9c6..3197995 100644
+--- a/arch/s390/mm/maccess.c
++++ b/arch/s390/mm/maccess.c
+@@ -201,6 +201,7 @@ void *xlate_dev_mem_ptr(phys_addr_t addr)
+ 	put_online_cpus();
+ 	return bounce;
+ }
++EXPORT_SYMBOL_GPL(xlate_dev_mem_ptr);
+ 
+ /*
+  * Free converted buffer for /dev/mem access (if necessary)
+@@ -210,3 +211,4 @@ void unxlate_dev_mem_ptr(phys_addr_t addr, void *buf)
+ 	if ((void *) addr != buf)
+ 		free_page((unsigned long) buf);
+ }
++EXPORT_SYMBOL_GPL(unxlate_dev_mem_ptr);
+diff --git a/arch/x86/include/asm/crash-driver.h b/arch/x86/include/asm/crash-driver.h
+new file mode 100644
+index 0000000..fd4736e
+--- /dev/null
++++ b/arch/x86/include/asm/crash-driver.h
+@@ -0,0 +1,6 @@
++#ifndef _X86_CRASH_H
++#define _X86_CRASH_H
++
++#include <asm-generic/crash-driver.h>
++
++#endif /* _X86_CRASH_H */
+diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
+index fdb8f3e..7dd3a49 100644
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -4,6 +4,9 @@
+ 
+ menu "Character devices"
+ 
++config CRASH
++	tristate "Crash Utility memory driver"
++
+ source "drivers/tty/Kconfig"
+ 
+ config DEVMEM
+diff --git a/drivers/char/Makefile b/drivers/char/Makefile
+index 55d16bf..a40ace9 100644
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -61,3 +61,5 @@ js-rtc-y = rtc.o
+ obj-$(CONFIG_TILE_SROM)		+= tile-srom.o
+ obj-$(CONFIG_XILLYBUS)		+= xillybus/
+ obj-$(CONFIG_POWERNV_OP_PANEL)	+= powernv-op-panel.o
++
++obj-$(CONFIG_CRASH)            += crash.o
+diff --git a/drivers/char/crash.c b/drivers/char/crash.c
+new file mode 100644
+index 0000000..085378a
+--- /dev/null
++++ b/drivers/char/crash.c
+@@ -0,0 +1,128 @@
++/*
++ *  linux/drivers/char/crash.c
++ *
++ *  Copyright (C) 2004  Dave Anderson <anderson@redhat.com>
++ *  Copyright (C) 2004  Red Hat, Inc.
++ */
++
++/******************************************************************************
++ *
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2, or (at your option)
++ *   any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *****************************************************************************/
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/types.h>
++#include <asm/crash-driver.h>
++
++#define CRASH_VERSION   "1.0"
++
++/*
++ *  These are the file operation functions that allow crash utility
++ *  access to physical memory.
++ */
++
++static loff_t
++crash_llseek(struct file * file, loff_t offset, int orig)
++{
++	switch (orig) {
++	case 0:
++		file->f_pos = offset;
++		return file->f_pos;
++	case 1:
++		file->f_pos += offset;
++		return file->f_pos;
++	default:
++		return -EINVAL;
++	}
++}
++
++/*
++ *  Determine the page address for an address offset value,
++ *  get a virtual address for it, and copy it out.
++ *  Accesses must fit within a page.
++ */
++static ssize_t
++crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
++{
++	void *vaddr;
++	struct page *page;
++	u64 offset;
++	ssize_t read;
++
++	offset = *poff;
++	if (offset >> PAGE_SHIFT != (offset+count-1) >> PAGE_SHIFT)
++		return -EINVAL;
++
++	vaddr = map_virtual(offset, &page);
++	if (!vaddr)
++		return -EFAULT;
++
++	if (copy_to_user(buf, vaddr, count)) {
++		unmap_virtual(page);
++		return -EFAULT;
++	}
++	unmap_virtual(page);
++
++	read = count;
++	*poff += read;
++	return read;
++}
++
++static struct file_operations crash_fops = {
++	.owner = THIS_MODULE,
++	.llseek = crash_llseek,
++	.read = crash_read,
++};
++
++static struct miscdevice crash_dev = {
++	MISC_DYNAMIC_MINOR,
++	"crash",
++	&crash_fops
++};
++
++static int __init
++crash_init(void)
++{
++	int ret;
++
++	ret = misc_register(&crash_dev);
++	if (ret) {
++		printk(KERN_ERR
++		    "crash memory driver: cannot misc_register (MISC_DYNAMIC_MINOR)\n");
++		goto out;
++	}
++
++	ret = 0;
++	printk(KERN_INFO "crash memory driver: version %s\n", CRASH_VERSION);
++out:
++	return ret;
++}
++
++static void __exit
++crash_cleanup_module(void)
++{
++	misc_deregister(&crash_dev);
++}
++
++module_init(crash_init);
++module_exit(crash_cleanup_module);
++
++MODULE_LICENSE("GPL");
+diff --git a/include/asm-generic/crash-driver.h b/include/asm-generic/crash-driver.h
+new file mode 100644
+index 0000000..25ab986
+--- /dev/null
++++ b/include/asm-generic/crash-driver.h
+@@ -0,0 +1,72 @@
++#ifndef __CRASH_H__
++#define __CRASH_H__
++
++/*
++ * include/linux/crash-driver.h
++ *
++ * Copyright (c) 2013 Red Hat, Inc. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2, or (at your option)
++ * any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifdef __KERNEL__
++
++#include <linux/mm.h>
++#include <linux/highmem.h>
++
++static inline void *
++map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	void *vaddr;
++
++	pfn = (unsigned long)(offset >> PAGE_SHIFT);
++
++	if (!page_is_ram(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
++		return NULL;
++	}
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	page = pfn_to_page(pfn);
++
++	vaddr = kmap(page);
++	if (!vaddr) {
++		printk(KERN_INFO
++		    "crash memory driver: pfn: %lx kmap(page: %lx) failed\n",
++			pfn, (unsigned long)page);
++		return NULL;
++	}
++
++	*pp = page;
++	return (vaddr + (offset & (PAGE_SIZE-1)));
++}
++
++static inline void unmap_virtual(struct page *page)
++{
++	kunmap(page);
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* __CRASH_H__ */
+-- 
+2.9.2
+
+From 7523c19e1d22fbabeaeae9520c16a78202c0eefe Mon Sep 17 00:00:00 2001
+From: Fedora Kernel Team <kernel-team@fedoraproject.org>
+Date: Tue, 20 Sep 2016 19:39:46 +0200
+Subject: [PATCH] Update of crash driver to handle CONFIG_HARDENED_USERCOPY and
+ to restrict the supported architectures.
+
+---
+ drivers/char/Kconfig |  1 +
+ drivers/char/crash.c | 33 ++++++++++++++++++++++++++++++---
+ 2 files changed, 31 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
+index 99b99d5..be6a3ae 100644
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -6,6 +6,7 @@ menu "Character devices"
+ 
+ config CRASH
+ 	tristate "Crash Utility memory driver"
++	depends on X86_32 || X86_64 || ARM || ARM64 || PPC64 || S390
+ 
+ source "drivers/tty/Kconfig"
+ 
+diff --git a/drivers/char/crash.c b/drivers/char/crash.c
+index 085378a..0258bf8 100644
+--- a/drivers/char/crash.c
++++ b/drivers/char/crash.c
+@@ -32,7 +32,7 @@
+ #include <asm/types.h>
+ #include <asm/crash-driver.h>
+ 
+-#define CRASH_VERSION   "1.0"
++#define CRASH_VERSION   "1.2"
+ 
+ /*
+  *  These are the file operation functions that allow crash utility
+@@ -66,6 +66,7 @@ crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
+ 	struct page *page;
+ 	u64 offset;
+ 	ssize_t read;
++	char *buffer = file->private_data;
+ 
+ 	offset = *poff;
+ 	if (offset >> PAGE_SHIFT != (offset+count-1) >> PAGE_SHIFT)
+@@ -74,8 +75,12 @@ crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
+ 	vaddr = map_virtual(offset, &page);
+ 	if (!vaddr)
+ 		return -EFAULT;
+-
+-	if (copy_to_user(buf, vaddr, count)) {
++	/*
++	 * Use bounce buffer to bypass the CONFIG_HARDENED_USERCOPY
++	 * kernel text restriction.
++	*/
++	memcpy(buffer, (char *)vaddr, count);
++	if (copy_to_user(buf, buffer, count)) {
+ 		unmap_virtual(page);
+ 		return -EFAULT;
+ 	}
+@@ -86,10 +91,32 @@ crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
+ 	return read;
+ }
+ 
++static int
++crash_open(struct inode * inode, struct file * filp)
++{
++	if (!capable(CAP_SYS_RAWIO))
++		return -EPERM;
++
++	filp->private_data = (void *)__get_free_page(GFP_KERNEL);
++	if (!filp->private_data)
++		return -ENOMEM;
++
++	return 0;
++}
++
++static int
++crash_release(struct inode *inode, struct file *filp)
++{
++	free_pages((unsigned long)filp->private_data, 0);
++	return 0;
++}
++
+ static struct file_operations crash_fops = {
+ 	.owner = THIS_MODULE,
+ 	.llseek = crash_llseek,
+ 	.read = crash_read,
++	.open = crash_open,
++	.release = crash_release,
+ };
+ 
+ static struct miscdevice crash_dev = {
+-- 
+2.9.3
+
+From: Dave Anderson <anderson@redhat.com>
+Date: Fri, 18 Nov 2016 11:52:35 -0500
+Cc: onestero@redhat.com
+Subject: [PATCH v2] Restore live system crash analysis for ARM64
+
+This v2 version simplifies the copy out of the kimage_voffset value
+to user-space per Oleg's suggestion.
+
+Upstream status: N/A
+
+Test: v2 version tested successfully with a modified crash utility
+
+The following Linux 4.6 commit breaks support for live system
+crash analysis on ARM64:
+
+   commit a7f8de168ace487fa7b88cb154e413cf40e87fc6
+   Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+   arm64: allow kernel Image to be loaded anywhere in physical memory
+
+The patchset drastically modified the kernel's virtual memory layout,
+where notably the static kernel text and data image was moved from the
+unity mapped region into the vmalloc region.  Prior to Linux 4.6,
+the kernel's __virt_to_phys() function was this:
+
+ #define __virt_to_phys(x)  (((phys_addr_t)(x) - PAGE_OFFSET + PHYS_OFFSET))
+
+When running on a live system, the crash utility could determine PAGE_OFFSET
+by looking at the virtual addresses compiled into the vmlinux file, and
+PHYS_OFFSET can be determined by looking at /proc/iomem.
+
+As of Linux 4.6, it is done differently:
+
+ #define __virt_to_phys(x) ({                                            \
+        phys_addr_t __x = (phys_addr_t)(x);                             \
+        __x & BIT(VA_BITS - 1) ? (__x & ~PAGE_OFFSET) + PHYS_OFFSET :   \
+                                 (__x - kimage_voffset); })
+
+The PAGE_OFFSET/PHYS_OFFSET section of the conditional expression is for
+traditional unity-mapped virtual addresses, but kernel text and static
+data requires the new "kimage_voffset" variable.  Unfortunately, the
+contents of the new "kimage_voffset" variable is not available or
+calculatable from a user-space perspective, even with root privileges.
+
+At least the ARM64 developers made its contents available to modules
+with an EXPORT_SYMBOL(kimage_voffset) declaration.  Accordingly, with
+a modification to the /dev/crash driver to return its contents, the
+crash utility can run on a live system.
+
+The patch allows for architecture-specific DEV_CRASH_ARCH_DATA ioctls
+to be created, where this is the first instance of one.
+
+
+---
+ arch/arm64/include/asm/crash-driver.h | 16 ++++++++++++++++
+ drivers/char/crash.c                  | 13 ++++++++++++-
+ 2 files changed, 28 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/include/asm/crash-driver.h b/arch/arm64/include/asm/crash-driver.h
+index 43b26da..fe68e7c 100644
+--- a/arch/arm64/include/asm/crash-driver.h
++++ b/arch/arm64/include/asm/crash-driver.h
+@@ -3,4 +3,20 @@
+ 
+ #include <asm-generic/crash-driver.h>
+ 
++#define DEV_CRASH_ARCH_DATA _IOR('c', 1, long)
++
++static long
++crash_arch_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	extern u64 kimage_voffset;
++
++	switch (cmd)
++	{
++	case DEV_CRASH_ARCH_DATA:
++		return put_user(kimage_voffset, (unsigned long __user *)arg);
++	default:
++		return -EINVAL;
++	}
++}
++
+ #endif /* _ARM64_CRASH_H */
+diff --git a/drivers/char/crash.c b/drivers/char/crash.c
+index 0258bf8..dfb767c 100644
+--- a/drivers/char/crash.c
++++ b/drivers/char/crash.c
+@@ -32,7 +32,7 @@
+ #include <asm/types.h>
+ #include <asm/crash-driver.h>
+ 
+-#define CRASH_VERSION   "1.2"
++#define CRASH_VERSION   "1.3"
+ 
+ /*
+  *  These are the file operation functions that allow crash utility
+@@ -111,10 +111,21 @@ crash_release(struct inode *inode, struct file *filp)
+ 	return 0;
+ }
+ 
++static long
++crash_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++#ifdef DEV_CRASH_ARCH_DATA
++	return crash_arch_ioctl(file, cmd, arg);
++#else
++	return -EINVAL;
++#endif
++}
++
+ static struct file_operations crash_fops = {
+ 	.owner = THIS_MODULE,
+ 	.llseek = crash_llseek,
+ 	.read = crash_read,
++	.unlocked_ioctl = crash_ioctl,
+ 	.open = crash_open,
+ 	.release = crash_release,
+ };
+-- 
+1.8.3.1
+

criu-no-expert.patch

@@ -0,0 +1,32 @@
+From: "kernel-team@fedoraproject.org" <kernel-team@fedoraproject.org>
+Date: Wed, 30 Jan 2013 10:55:31 -0500
+Subject: [PATCH] criu: no expert
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ init/Kconfig | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/init/Kconfig b/init/Kconfig
+index 648bb79d6b73..860ca236975f 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1137,7 +1137,7 @@ config CGROUP_WRITEBACK
+ endif # CGROUPS
+ 
+ config CHECKPOINT_RESTORE
+-	bool "Checkpoint/restore support" if EXPERT
++	bool "Checkpoint/restore support"
+ 	select PROC_CHILDREN
+ 	default n
+ 	help
+@@ -1149,7 +1149,7 @@ config CHECKPOINT_RESTORE
+ 	  If unsure, say N here.
+ 
+ menuconfig NAMESPACES
+-	bool "Namespaces support" if EXPERT
++	bool "Namespaces support"
+ 	depends on MULTIUSER
+ 	default !EXPERT
+ 	help

dcache-Handle-escaped-paths-in-prepend_path.patch

@@ -0,0 +1,65 @@
+From c0ea161a6e7158281f64bc6d41126da43cb08f14 Mon Sep 17 00:00:00 2001
+From: "Eric W. Biederman" <ebiederm@xmission.com>
+Date: Sat, 15 Aug 2015 13:36:12 -0500
+Subject: [PATCH 1/2] dcache: Handle escaped paths in prepend_path
+
+commit cde93be45a8a90d8c264c776fab63487b5038a65 upstream.
+
+A rename can result in a dentry that by walking up d_parent
+will never reach it's mnt_root.  For lack of a better term
+I call this an escaped path.
+
+prepend_path is called by four different functions __d_path,
+d_absolute_path, d_path, and getcwd.
+
+__d_path only wants to see paths are connected to the root it passes
+in.  So __d_path needs prepend_path to return an error.
+
+d_absolute_path similarly wants to see paths that are connected to
+some root.  Escaped paths are not connected to any mnt_root so
+d_absolute_path needs prepend_path to return an error greater
+than 1.  So escaped paths will be treated like paths on lazily
+unmounted mounts.
+
+getcwd needs to prepend "(unreachable)" so getcwd also needs
+prepend_path to return an error.
+
+d_path is the interesting hold out.  d_path just wants to print
+something, and does not care about the weird cases.  Which raises
+the question what should be printed?
+
+Given that <escaped_path>/<anything> should result in -ENOENT I
+believe it is desirable for escaped paths to be printed as empty
+paths.  As there are not really any meaninful path components when
+considered from the perspective of a mount tree.
+
+So tweak prepend_path to return an empty path with an new error
+code of 3 when it encounters an escaped path.
+
+Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
+Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
+---
+ fs/dcache.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/fs/dcache.c b/fs/dcache.c
+index 9b5fe503f6cb..e3b44ca75a1b 100644
+--- a/fs/dcache.c
++++ b/fs/dcache.c
+@@ -2926,6 +2926,13 @@ restart:
+ 
+ 		if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) {
+ 			struct mount *parent = ACCESS_ONCE(mnt->mnt_parent);
++			/* Escaped? */
++			if (dentry != vfsmnt->mnt_root) {
++				bptr = *buffer;
++				blen = *buflen;
++				error = 3;
++				break;
++			}
+ 			/* Global root? */
+ 			if (mnt != parent) {
+ 				dentry = ACCESS_ONCE(mnt->mnt_mountpoint);
+-- 
+2.4.3
+

die-floppy-die.patch

@@ -0,0 +1,29 @@
+From: Kyle McMartin <kyle@phobos.i.jkkm.org>
+Date: Tue, 30 Mar 2010 00:04:29 -0400
+Subject: [PATCH] die-floppy-die
+
+Kill the floppy.ko pnp modalias. We were surviving just fine without
+autoloading floppy drivers, tyvm.
+
+Please feel free to register all complaints in the wastepaper bin.
+
+Bugzilla: N/A
+Upstream-status: Fedora mustard
+---
+ drivers/block/floppy.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
+index a08cda955285..e320e1e679cf 100644
+--- a/drivers/block/floppy.c
++++ b/drivers/block/floppy.c
+@@ -4633,8 +4633,7 @@ static const struct pnp_device_id floppy_pnpids[] = {
+ 	{"PNP0700", 0},
+ 	{}
+ };
+-
+-MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
++/* MODULE_DEVICE_TABLE(pnp, floppy_pnpids); */
+ 
+ #else
+ 

disable-i8042-check-on-apple-mac.patch

@@ -0,0 +1,62 @@
+From 31e64826785b5bafef7a6361516c060be2bca253 Mon Sep 17 00:00:00 2001
+From: Bastien Nocera <hadess@hadess.net>
+Date: Thu, 20 May 2010 10:30:31 -0400
+Subject: [PATCH] disable i8042 check on apple mac
+
+As those computers never had any i8042 controllers, and the
+current lookup code could potentially lock up/hang/wait for
+timeout for long periods of time.
+
+Fixes intermittent hangs on boot on a MacbookAir1,1
+
+Bugzilla: N/A
+Upstream-status: http://lkml.indiana.edu/hypermail/linux/kernel/1005.0/00938.html (and pinged on Dec 17, 2013)
+
+Signed-off-by: Bastien Nocera <hadess@hadess.net>
+---
+ drivers/input/serio/i8042.c | 22 ++++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
+index c9c98f0ab284..5137185e14a9 100644
+--- a/drivers/input/serio/i8042.c
++++ b/drivers/input/serio/i8042.c
+@@ -1540,6 +1540,22 @@ static struct notifier_block i8042_kbd_bind_notifier_block = {
+ 	.notifier_call = i8042_kbd_bind_notifier,
+ };
+ 
++#ifdef CONFIG_DMI
++static struct dmi_system_id __initdata dmi_system_table[] = {
++	{
++		.matches = {
++			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Computer, Inc.")
++		},
++	},
++	{
++		.matches = {
++			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Inc.")
++		},
++	},
++	{}
++};
++#endif /*CONFIG_DMI*/
++
+ static int __init i8042_init(void)
+ {
+ 	struct platform_device *pdev;
+@@ -1547,6 +1563,12 @@ static int __init i8042_init(void)
+ 
+ 	dbg_init();
+ 
++#ifdef CONFIG_DMI
++	/* Intel Apple Macs never have an i8042 controller */
++	if (dmi_check_system(dmi_system_table) > 0)
++		return -ENODEV;
++#endif /*CONFIG_DMI*/
++
+ 	err = i8042_platform_init();
+ 	if (err)
+ 		return err;
+-- 
+2.4.3
+

drm-i915-hush-check-crtc-state.patch

@@ -0,0 +1,32 @@
+From 5550f20b5f9becb485fb3a67bf0193025d40bc6f Mon Sep 17 00:00:00 2001
+From: Adam Jackson <ajax@redhat.com>
+Date: Wed, 13 Nov 2013 10:17:24 -0500
+Subject: [PATCH] drm/i915: hush check crtc state
+
+This is _by far_ the most common backtrace for i915 on retrace.fp.o, and
+it's mostly useless noise.  There's not enough context when it's generated
+to know if something actually went wrong.  Downgrade the message to
+KMS debugging so we can still get it if we want it.
+
+Bugzilla: 1027037 1028785
+Upstream-status: http://lists.freedesktop.org/archives/intel-gfx/2013-November/035948.html
+---
+ drivers/gpu/drm/i915/intel_display.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
+index 46f9be3ad5a2..ad2e62e4cdba 100644
+--- a/drivers/gpu/drm/i915/intel_display.c
++++ b/drivers/gpu/drm/i915/intel_display.c
+@@ -12970,7 +12970,7 @@ verify_crtc_state(struct drm_crtc *crtc,
+ 	sw_config = to_intel_crtc_state(crtc->state);
+ 	if (!intel_pipe_config_compare(dev, sw_config,
+ 				       pipe_config, false)) {
+-		I915_STATE_WARN(1, "pipe state doesn't match!\n");
++		DRM_DEBUG_KMS("pipe state doesn't match!\n");
+ 		intel_dump_pipe_config(intel_crtc, pipe_config,
+ 				       "[hw state]");
+ 		intel_dump_pipe_config(intel_crtc, sw_config,
+-- 
+2.5.5
+

drm-i915-turn-off-wc-mmaps.patch

@@ -0,0 +1,21 @@
+From: Dave Airlie <airlied@redhat.com>
+Date: Thu, 4 Jun 2015 07:12:20 -0400
+Subject: [PATCH] drm: i915: turn off wc mmaps
+
+---
+ drivers/gpu/drm/i915/i915_drv.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
+index d2df321ba634..775a5b11a366 100644
+--- a/drivers/gpu/drm/i915/i915_drv.c
++++ b/drivers/gpu/drm/i915/i915_drv.c
+@@ -151,7 +151,7 @@ static int i915_getparam(struct drm_device *dev, void *data,
+ 		value = 1;
+ 		break;
+ 	case I915_PARAM_MMAP_VERSION:
+-		value = 1;
++		value = 0;
+ 		break;
+ 	case I915_PARAM_SUBSLICE_TOTAL:
+ 		value = INTEL_INFO(dev)->subslice_total;

drm-vmwgfx-Allow-dropped-masters-render-node-like-ac.patch

@@ -0,0 +1,60 @@
+From a19afebb883f2a02ecf4b8d5a114ce6957a59238 Mon Sep 17 00:00:00 2001
+From: Thomas Hellstrom <thellstrom@vmware.com>
+Date: Wed, 26 Aug 2015 05:49:21 -0700
+Subject: [PATCH 2/2] drm/vmwgfx: Allow dropped masters render-node like access
+ on legacy nodes v2
+
+Applications like gnome-shell may try to render after dropping master
+privileges. Since the driver should now be safe against this scenario,
+allow those applications to use their legacy node like a render node.
+
+v2: Add missing return statement.
+
+Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
+Reviewed-by: Sinclair Yeh <syeh@vmware.com>
+---
+ drivers/gpu/drm/vmwgfx/vmwgfx_drv.c     | 7 ++++++-
+ drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 6 ++++++
+ 2 files changed, 12 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+index a4766acd0ea2..d022b509f1ac 100644
+--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
++++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+@@ -993,10 +993,15 @@ static struct vmw_master *vmw_master_check(struct drm_device *dev,
+ 	}
+ 
+ 	/*
+-	 * Check if we were previously master, but now dropped.
++	 * Check if we were previously master, but now dropped. In that
++	 * case, allow at least render node functionality.
+ 	 */
+ 	if (vmw_fp->locked_master) {
+ 		mutex_unlock(&dev->master_mutex);
++
++		if (flags & DRM_RENDER_ALLOW)
++			return NULL;
++
+ 		DRM_ERROR("Dropped master trying to access ioctl that "
+ 			  "requires authentication.\n");
+ 		return ERR_PTR(-EACCES);
+diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+index 4d0c98edeb6a..7fc3e8abd0c4 100644
+--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
++++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+@@ -906,6 +906,12 @@ vmw_surface_handle_reference(struct vmw_private *dev_priv,
+ 				  "surface reference.\n");
+ 			return -EACCES;
+ 		}
++		if (ACCESS_ONCE(vmw_fpriv(file_priv)->locked_master)) {
++			DRM_ERROR("Locked master refused legacy "
++				  "surface reference.\n");
++			return -EACCES;
++		}
++
+ 		handle = u_handle;
+ 	}
+ 
+-- 
+2.4.3
+

efi-Add-EFI_SECURE_BOOT-bit.patch

@@ -0,0 +1,43 @@
+From c01ff700ea4192ae04b306fef725d62189550236 Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Tue, 27 Aug 2013 13:33:03 -0400
+Subject: [PATCH 13/20] efi: Add EFI_SECURE_BOOT bit
+
+UEFI machines can be booted in Secure Boot mode.  Add a EFI_SECURE_BOOT bit
+for use with efi_enabled.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ arch/x86/kernel/setup.c | 2 ++
+ include/linux/efi.h     | 1 +
+ 2 files changed, 3 insertions(+)
+
+diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
+index f3b804f..a401ff8 100644
+--- a/arch/x86/kernel/setup.c
++++ b/arch/x86/kernel/setup.c
+@@ -1145,7 +1145,9 @@ void __init setup_arch(char **cmdline_p)
+ 
+ #ifdef CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE
+ 	if (boot_params.secure_boot) {
++		set_bit(EFI_SECURE_BOOT, &efi.flags);
+ 		enforce_signed_modules();
++		pr_info("Secure boot enabled\n");
+ 	}
+ #endif
+ 
+diff --git a/include/linux/efi.h b/include/linux/efi.h
+index 569b5a8..4dc970e 100644
+--- a/include/linux/efi.h
++++ b/include/linux/efi.h
+@@ -980,6 +980,7 @@ extern int __init efi_setup_pcdp_console(char *);
+ #define EFI_ARCH_1		7	/* First arch-specific bit */
+ #define EFI_DBG			8	/* Print additional debug info at runtime */
+ #define EFI_NX_PE_DATA		9	/* Can runtime data regions be mapped non-executable? */
++#define EFI_SECURE_BOOT		10	/* Are we in Secure Boot mode? */
+ 
+ #ifdef CONFIG_EFI
+ /*
+-- 
+2.5.0
+

efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch

@@ -0,0 +1,58 @@
+From 9ef94251448aa463c5937ee8e8e27d6fd9529509 Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Tue, 5 Feb 2013 19:25:05 -0500
+Subject: [PATCH 11/20] efi: Disable secure boot if shim is in insecure mode
+
+A user can manually tell the shim boot loader to disable validation of
+images it loads.  When a user does this, it creates a UEFI variable called
+MokSBState that does not have the runtime attribute set.  Given that the
+user explicitly disabled validation, we can honor that and not enable
+secure boot mode if that variable is set.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ arch/x86/boot/compressed/eboot.c | 20 +++++++++++++++++++-
+ 1 file changed, 19 insertions(+), 1 deletion(-)
+
+diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
+index b4de3faa3f29..5cc2ef570390 100644
+--- a/arch/x86/boot/compressed/eboot.c
++++ b/arch/x86/boot/compressed/eboot.c
+@@ -830,8 +830,9 @@ out:
+ 
+ static int get_secure_boot(void)
+ {
+-	u8 sb, setup;
++	u8 sb, setup, moksbstate;
+ 	unsigned long datasize = sizeof(sb);
++	u32 attr;
+ 	efi_guid_t var_guid = EFI_GLOBAL_VARIABLE_GUID;
+ 	efi_status_t status;
+ 
+@@ -855,6 +856,23 @@ static int get_secure_boot(void)
+ 	if (setup == 1)
+ 		return 0;
+ 
++	/* See if a user has put shim into insecure_mode.  If so, and the variable
++	 * doesn't have the runtime attribute set, we might as well honor that.
++	 */
++	var_guid = EFI_SHIM_LOCK_GUID;
++	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
++				L"MokSBState", &var_guid, &attr, &datasize,
++				&moksbstate);
++
++	/* If it fails, we don't care why.  Default to secure */
++	if (status != EFI_SUCCESS)
++		return 1;
++
++	if (!(attr & EFI_VARIABLE_RUNTIME_ACCESS)) {
++		if (moksbstate == 1)
++			return 0;
++	}
++
+ 	return 1;
+ }
+ 
+-- 
+2.4.3
+

filter-aarch64.sh

@@ -13,6 +13,4 @@ driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds medi
 
 ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
 
-drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel radeon rockchip tegra sun4i tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i"

filter-aarch64.sh.fedora

@@ -1,18 +0,0 @@
-#! /bin/bash
-
-# This is the aarch64 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia power ssb soundwire staging tty uio uwb w1"
-
-ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
-
-drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel pl111 radeon rockchip tegra sun4i sun4i-drm-hdmi tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-armv7hl.sh

@@ -9,10 +9,10 @@
 # modifications to the overrides below.  If something should be removed across
 # all arches, remove it in the default instead of per-arch.
 
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn media memstick message nfc ntb pcmcia ssb soundwire staging tty uio uwb w1"
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn media memstick message mwave nfc ntb pcmcia platform ssb staging tty uio uwb w1"
 
 ethdrvs="3com adaptec alteon altera amd atheros broadcom cadence chelsio cisco dec dlink emulex icplus mellanox micrel myricom natsemi neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis sun tehuti via wiznet xircom"
 
-drmdrvs="amd arm armada bridge ast exynos etnaviv hisilicon i2c imx meson mgag200 msm nouveau omapdrm panel pl111 radeon rockchip sti stm sun4i sun4i-drm-hdmi tegra tilcdc tinydrm vc4"
+drmdrvs="amd armada bridge ast exynos i2c imx mgag200 msm omapdrm panel nouveau radeon rockchip tegra tilcdc via"
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls bq27xxx_battery_hdq mlx5_vdpa"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i"

filter-i686.sh

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the i686 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick mfd mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i"

filter-i686.sh.fedora

@@ -1,14 +0,0 @@
-#! /bin/bash
-
-# This is the i686 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation hid-sensor-temperature hid-sensor-humidity target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus"

filter-modules.sh

@@ -13,9 +13,6 @@
 # subsys should be in kernel-modules on all arches, please change the defaults
 # listed here.
 
-# Overrides is individual modules which need to remain in kernel-core due to deps.
-overrides="cec"
-
 # Set the default dirs/modules to filter out
 driverdirs="atm auxdisplay bcma bluetooth firewire fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
 
@@ -23,21 +20,21 @@ chardrvs="mwave pcmcia"
 
 netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
 
-ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+ethdrvs="3com adaptec alteon amd atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
 
 inputdrvs="gameport tablet touchscreen"
 
-scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic hisi_sas isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf"
+scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs"
 
 usbdrvs="atm image misc serial wusbcore"
 
-fsdrvs="affs befs coda cramfs ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs udf ufs"
 
-netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp wireless"
 
 drmdrvs="amd ast gma500 i2c i915 mgag200 nouveau radeon via "
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial ism hid-asus"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i"
 
 # Grab the arch-specific filter list overrides
 source ./filter-$2.sh
@@ -146,20 +143,6 @@ do
         filter_ko $1 ${mod}
 done
 
-# Now process the override list to bring those modules back into core
-for mod in ${overrides}
-do
-	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
-	if [ $? -ne 0 ]
-        then
-                echo "Couldn't save ${mod}.ko  Skipping."
-        else
-                grep -e "/${mod}.ko" k-d.list >> $filelist
-                mv k-d.list.tmp k-d.list
-        fi
-
-done
-
 # Go through our generated drivers list and remove the .ko files.  We'll
 # restore them later.
 for mod in `cat k-d.list`

filter-modules.sh.fedora

@@ -1,170 +0,0 @@
-#! /bin/bash
-#
-# Called as filter-modules.sh list-of-modules Arch
-
-# This script filters the modules into the kernel-core and kernel-modules
-# subpackages.  We list out subsystems/subdirs to prune from the installed
-# module directory.  What is left is put into the kernel-core package.  What is
-# pruned is contained in the kernel-modules package.
-#
-# This file contains the default subsys/subdirs to prune from all architectures.
-# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
-# that contains the set of override lists to be used instead.  If a module or
-# subsys should be in kernel-modules on all arches, please change the defaults
-# listed here.
-
-# Overrides is individual modules which need to remain in kernel-core due to deps.
-overrides="cec"
-
-# Set the default dirs/modules to filter out
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
-
-chardrvs="mwave pcmcia"
-
-netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
-
-ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
-
-inputdrvs="gameport tablet touchscreen"
-
-scsidrvs="aacraid advansys aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf wd719x"
-
-usbdrvs="atm image misc serial wusbcore"
-
-fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs jffs2 minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
-
-netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
-
-drmdrvs="amd ast bridge gma500 i2c i915 mgag200 nouveau panel radeon"
-
-iiodrvs="accel adc afe common dac gyro health humidity light magnetometer multiplexer orientation potentiometer potentiostat pressure temperature"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus iTCO_wdt rnbd-client rnbd-server mlx5_vdpa"
-
-# Grab the arch-specific filter list overrides
-source ./filter-$2.sh
-
-filter_dir() {
-	filelist=$1
-	dir=$2
-
-	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${dir}.  Skipping."
-	else
-		grep -e "${dir}/" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-filter_ko() {
-	filelist=$1
-	mod=$2
-
-	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${mod}.ko  Skipping."
-	else
-		grep -e "${mod}.ko" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-# Filter the drivers/ subsystems
-for subsys in ${driverdirs}
-do
-	filter_dir $1 drivers/${subsys}
-done
-
-# Filter the networking drivers
-for netdrv in ${netdrvs}
-do
-	filter_dir $1 drivers/net/${netdrv}
-done
-
-# Filter the char drivers
-for char in ${chardrvs}
-do
-	filter_dir $1 drivers/char/${input}
-done
-
-# Filter the ethernet drivers
-for eth in ${ethdrvs}
-do
-	filter_dir $1 drivers/net/ethernet/${eth}
-done
-
-# SCSI
-for scsi in ${scsidrvs}
-do
-	filter_dir $1 drivers/scsi/${scsi}
-done
-
-# Input
-for input in ${inputdrvs}
-do
-	filter_dir $1 drivers/input/${input}
-done
-
-# USB
-for usb in ${usbdrvs}
-do
-	filter_dir $1 drivers/usb/${usb}
-done
-
-# Filesystems
-for fs in ${fsdrvs}
-do
-	filter_dir $1 fs/${fs}
-done
-
-# Network protocols
-for prot in ${netprots}
-do
-	filter_dir $1 kernel/net/${prot}
-done
-
-# DRM
-for drm in ${drmdrvs}
-do
-	filter_dir $1 drivers/gpu/drm/${drm}
-done
-
-# Just kill sound.
-filter_dir $1 kernel/sound
-
-# Now go through and filter any single .ko files that might have deps on the
-# things we filtered above
-for mod in ${singlemods}
-do
-        filter_ko $1 ${mod}
-done
-
-# Now process the override list to bring those modules back into core
-for mod in ${overrides}
-do
-	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
-	if [ $? -ne 0 ]
-        then
-                echo "Couldn't save ${mod}.ko  Skipping."
-        else
-                grep -e "/${mod}.ko" k-d.list >> $filelist
-                mv k-d.list.tmp k-d.list
-        fi
-
-done
-
-# Go through our generated drivers list and remove the .ko files.  We'll
-# restore them later.
-for mod in `cat k-d.list`
-do
-	rm -rf $mod
-done

filter-ppc64.sh

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the ppc64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i"

filter-ppc64le.sh

@@ -11,4 +11,4 @@
 
 driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i"