clean up sources

(rhbz#709122) (korgbz#34992) [a99168ee in wireless-next]

.gitignore

@@ -1,2 +1,6 @@
-*.xz
-*.bz2
+linux-*.tar.bz2
+patch-*.bz2
+clog
+*.rpm
+kernel-2.6.*/
+kernel-3.*/

Makefile

@@ -0,0 +1,313 @@
+# Makefile for source rpm: kernel
+SPECFILE := kernel.spec
+
+# use noarch for make prep instead of the current CPU
+# noarch creates and checks all config files not just the current one,
+# in addition "i386" isn't a valid kernel target
+PREPARCH  = noarch
+
+# we only check the .sign signatures
+UPSTREAM_CHECKS = sign
+
+.PHONY: help
+help:
+%:
+	@echo "Try fedpkg $@ or something like that"
+	@exit 1
+
+include Makefile.config
+
+ifndef KVERSION
+KVERSION := $(shell awk '$$1 == "%define" && $$2 == "base_sublevel" { \
+				print "2.6." $$3 \
+			 }' $(SPECFILE))
+endif
+
+prep:
+	fedpkg -v prep --arch=$(PREPARCH)
+
+extremedebug:
+	@perl -pi -e 's/# CONFIG_DEBUG_PAGEALLOC is not set/CONFIG_DEBUG_PAGEALLOC=y/' config-nodebug
+
+debug:
+	@perl -pi -e 's/# CONFIG_SLUB_DEBUG_ON is not set/CONFIG_SLUB_DEBUG_ON=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_LOCK_STAT is not set/CONFIG_LOCK_STAT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_STACK_USAGE is not set/CONFIG_DEBUG_STACK_USAGE=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SLAB is not set/CONFIG_DEBUG_SLAB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_MUTEXES is not set/CONFIG_DEBUG_MUTEXES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_RT_MUTEXES is not set/CONFIG_DEBUG_RT_MUTEXES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_RWSEMS is not set/CONFIG_DEBUG_RWSEMS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_LOCK_ALLOC is not set/CONFIG_DEBUG_LOCK_ALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PROVE_LOCKING is not set/CONFIG_PROVE_LOCKING=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PROVE_RCU is not set/CONFIG_PROVE_RCU=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SPINLOCK is not set/CONFIG_DEBUG_SPINLOCK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_VM is not set/CONFIG_DEBUG_VM=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SLEEP_IN_IRQ is not set/CONFIG_DEBUG_SLEEP_IN_IRQ=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION is not set/CONFIG_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAILSLAB is not set/CONFIG_FAILSLAB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_PAGE_ALLOC is not set/CONFIG_FAIL_PAGE_ALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_IO_TIMEOUT is not set/CONFIG_FAIL_IO_TIMEOUT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_MAKE_REQUEST is not set/CONFIG_FAIL_MAKE_REQUEST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/CONFIG_FAULT_INJECTION_DEBUG_FS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_WRITECOUNT is not set/CONFIG_DEBUG_WRITECOUNT=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS is not set/CONFIG_DEBUG_OBJECTS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_FREE is not set/CONFIG_DEBUG_OBJECTS_FREE=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/CONFIG_DEBUG_OBJECTS_TIMERS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_X86_PTDUMP is not set/CONFIG_X86_PTDUMP=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CAN_DEBUG_DEVICES is not set/CONFIG_CAN_DEBUG_DEVICES=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_MODULE_FORCE_UNLOAD is not set/CONFIG_MODULE_FORCE_UNLOAD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/CONFIG_SYSCTL_SYSCALL_CHECK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_NOTIFIERS is not set/CONFIG_DEBUG_NOTIFIERS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMA_API_DEBUG is not set/CONFIG_DMA_API_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic
+	@perl -pi -e 's/# CONFIG_PM_ADVANCED_DEBUG is not set/CONFIG_PM_ADVANCED_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_BOOT_TRACER is not set/CONFIG_BOOT_TRACER=y/' config-generic
+	@perl -pi -e 's/# CONFIG_B43_DEBUG is not set/CONFIG_B43_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_B43LEGACY_DEBUG is not set/CONFIG_B43LEGACY_DEBUG=y/' config-generic
+	@perl -pi -e 's/# CONFIG_MMIOTRACE is not set/CONFIG_MMIOTRACE=y/' config-nodebug
+	@perl -pi -e 's/CONFIG_STRIP_ASM_SYMS=y/# CONFIG_STRIP_ASM_SYMS is not set/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_CREDENTIALS is not set/CONFIG_DEBUG_CREDENTIALS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_ACPI_DEBUG is not set/CONFIG_ACPI_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_EXT4_DEBUG is not set/CONFIG_EXT4_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/CONFIG_DEBUG_PERF_USE_VMALLOC=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_JBD2_DEBUG is not set/CONFIG_JBD2_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_CFQ_IOSCHED is not set/CONFIG_DEBUG_CFQ_IOSCHED=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DRBD_FAULT_INJECTION is not set/CONFIG_DRBD_FAULT_INJECTION=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_ATH_DEBUG is not set/CONFIG_ATH_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CARL9170_DEBUGFS is not set/CONFIG_CARL9170_DEBUGFS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/CONFIG_IWLWIFI_DEVICE_TRACING=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_WORK is not set/CONFIG_DEBUG_OBJECTS_WORK=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set/CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMADEVICES_DEBUG is not set/CONFIG_DMADEVICES_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DMADEVICES_VDEBUG is not set/CONFIG_DMADEVICES_VDEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/CONFIG_CEPH_LIB_PRETTYDEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_QUOTA_DEBUG is not set/CONFIG_QUOTA_DEBUG=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_KGDB_KDB is not set/CONFIG_KGDB_KDB=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_KDB_KEYBOARD is not set/CONFIG_KDB_KEYBOARD=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_PER_CPU_MAPS is not set/CONFIG_DEBUG_PER_CPU_MAPS=y/' config-nodebug
+	#@perl -pi -e 's/# CONFIG_PCI_DEFAULT_USE_CRS is not set/CONFIG_PCI_DEFAULT_USE_CRS=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_TEST_LIST_SORT is not set/CONFIG_TEST_LIST_SORT=y/' config-nodebug
+
+	@perl -pi -e 's/# CONFIG_DEBUG_SET_MODULE_RONX is not set/CONFIG_DEBUG_SET_MODULE_RONX=y/' config-nodebug
+
+	@# just in case we're going from extremedebug -> debug
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
+
+	@perl -pi -e 's/CONFIG_NR_CPUS=256/CONFIG_NR_CPUS=512/' config-x86_64-generic
+
+	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
+	@perl -pi -e 's/^%define rawhide_skip_docs 0/%define rawhide_skip_docs 1/' kernel.spec
+
+nodebuginfo:
+	@perl -pi -e 's/^%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 1\}/%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 0\}/' kernel.spec
+nodebug: release
+	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
+release:
+	@perl -pi -e 's/CONFIG_SLUB_DEBUG_ON=y/# CONFIG_SLUB_DEBUG_ON is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_LOCK_STAT=y/# CONFIG_LOCK_STAT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_STACK_USAGE=y/# CONFIG_DEBUG_STACK_USAGE is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SLAB=y/# CONFIG_DEBUG_SLAB is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_MUTEXES=y/# CONFIG_DEBUG_MUTEXES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_RT_MUTEXES=y/# CONFIG_DEBUG_RT_MUTEXES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_RWSEMS=y/# CONFIG_DEBUG_RWSEMS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_LOCK_ALLOC=y/# CONFIG_DEBUG_LOCK_ALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PROVE_LOCKING=y/# CONFIG_PROVE_LOCKING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PROVE_RCU=y/# CONFIG_PROVE_RCU is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SPINLOCK=y/# CONFIG_DEBUG_SPINLOCK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_VM=y/# CONFIG_DEBUG_VM is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SLEEP_IN_IRQ=y/# CONFIG_DEBUG_SLEEP_IN_IRQ is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION=y/# CONFIG_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAILSLAB=y/# CONFIG_FAILSLAB is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_PAGE_ALLOC=y/# CONFIG_FAIL_PAGE_ALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_IO_TIMEOUT=y/# CONFIG_FAIL_IO_TIMEOUT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_MAKE_REQUEST=y/# CONFIG_FAIL_MAKE_REQUEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION_DEBUG_FS=y/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_WRITECOUNT=y/# CONFIG_DEBUG_WRITECOUNT is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS=y/# CONFIG_DEBUG_OBJECTS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_FREE=y/# CONFIG_DEBUG_OBJECTS_FREE is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_TIMERS=y/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_X86_PTDUMP=y/# CONFIG_X86_PTDUMP is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CAN_DEBUG_DEVICES=y/# CONFIG_CAN_DEBUG_DEVICES is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_MODULE_FORCE_UNLOAD=y/# CONFIG_MODULE_FORCE_UNLOAD is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_SYSCTL_SYSCALL_CHECK=y/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_NOTIFIERS=y/# CONFIG_DEBUG_NOTIFIERS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMA_API_DEBUG=y/# CONFIG_DMA_API_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_PM_TEST_SUSPEND=y/#\ CONFIG_PM_TEST_SUSPEND\ is\ not\ set/' config-generic
+	@perl -pi -e 's/CONFIG_PM_ADVANCED_DEBUG=y/#\ CONFIG_PM_ADVANCED_DEBUG\ is\ not\ set/' config-generic
+	@perl -pi -e 's/CONFIG_BOOT_TRACER=y/#\ CONFIG_BOOT_TRACER\ is\ not\ set/' config-generic
+	@perl -pi -e 's/CONFIG_B43_DEBUG=y/# CONFIG_B43_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_B43LEGACY_DEBUG=y/# CONFIG_B43LEGACY_DEBUG is not set/' config-generic
+	@perl -pi -e 's/CONFIG_MMIOTRACE=y/# CONFIG_MMIOTRACE is not set/' config-nodebug
+	@perl -pi -e 's/# CONFIG_STRIP_ASM_SYMS is not set/CONFIG_STRIP_ASM_SYMS=y/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_CREDENTIALS=y/# CONFIG_DEBUG_CREDENTIALS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_ACPI_DEBUG=y/# CONFIG_ACPI_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_EXT4_DEBUG=y/# CONFIG_EXT4_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PERF_USE_VMALLOC=y/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_JBD2_DEBUG=y/# CONFIG_JBD2_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_CFQ_IOSCHED=y/# CONFIG_DEBUG_CFQ_IOSCHED is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DRBD_FAULT_INJECTION=y/# CONFIG_DRBD_FAULT_INJECTION is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_ATH_DEBUG=y/# CONFIG_ATH_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CARL9170_DEBUGFS=y/# CONFIG_CARL9170_DEBUGFS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_IWLWIFI_DEVICE_TRACING=y/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_WORK=y/# CONFIG_DEBUG_OBJECTS_WORK is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y/# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMADEVICES_DEBUG=y/# CONFIG_DMADEVICES_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DMADEVICES_VDEBUG=y/# CONFIG_DMADEVICES_VDEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CEPH_LIB_PRETTYDEBUG=y/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_QUOTA_DEBUG=y/# CONFIG_QUOTA_DEBUG is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/' config-nodebug
+	#@perl -pi -e 's/CONFIG_KGDB_KDB=y/# CONFIG_KGDB_KDB is not set/' config-nodebug
+	#@perl -pi -e 's/CONFIG_KDB_KEYBOARD=y/# CONFIG_KDB_KEYBOARD is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_PER_CPU_MAPS=y/# CONFIG_DEBUG_PER_CPU_MAPS is not set/' config-nodebug
+	#@perl -pi -e 's/CONFIG_PCI_DEFAULT_USE_CRS=y/# CONFIG_PCI_DEFAULT_USE_CRS is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_TEST_LIST_SORT=y/# CONFIG_TEST_LIST_SORT is not set/' config-nodebug
+
+	@perl -pi -e 's/CONFIG_DEBUG_SET_MODULE_RONX=y/# CONFIG_DEBUG_SET_MODULE_RONX is not set/' config-nodebug
+
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-debug
+	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
+
+	@perl -pi -e 's/CONFIG_NR_CPUS=512/CONFIG_NR_CPUS=256/' config-x86_64-generic
+
+	@perl -pi -e 's/^%define debugbuildsenabled 0/%define debugbuildsenabled 1/' kernel.spec
+	@perl -pi -e 's/^%define rawhide_skip_docs 1/%define rawhide_skip_docs 0/' kernel.spec
+
+reconfig:
+	@rm -f kernel-*-config
+	@VERSION=$(KVERSION) make -f Makefile.config configs
+	@scripts/reconfig.sh
+
+unused-kernel-patches:
+	@for f in *.patch; do if [ -e $$f ]; then (egrep -q "^Patch[[:digit:]]+:[[:space:]]+$$f" $(SPECFILE) || echo "Unused:    $$f") && egrep -q "^ApplyPatch[[:space:]]+$$f|^ApplyOptionalPatch[[:space:]]+$$f" $(SPECFILE) || echo "Unapplied: $$f"; fi; done
+
+# since i386 isn't a target...
+compile compile-short: DIST_DEFINES += --target $(shell uname -m)
+
+# 'make local' also needs to build the noarch firmware package
+local: noarch
+
+#
+# Hacks for building vanilla (unpatched) kernel rpms.
+# Use "make vanilla-TARGET" like "make TARGET" (make vanilla-scratch-build).
+#
+vanilla-%: $(SPECFILE:.spec=-vanilla.spec)
+	@$(MAKE) $* SPECFILE=$<
+
+$(SPECFILE:.spec=-vanilla.spec): $(SPECFILE)
+	@rm -f $@
+	(echo %define nopatches 1; cat $<) > $@
+
+#scratch-build: NAME = $(shell rpm $(RPM_DEFINES) $(DIST_DEFINES) -q --qf "%{NAME}\n" --specfile $(SPECFILE)| head -1)
+#scratch-build: test-srpm
+#	$(BUILD_CLIENT) build $(BUILD_FLAGS) --scratch $(TARGET) \
+#			$(SRCRPMDIR)/$(NAME)-$(VERSION)-$(RELEASE).src.rpm
+
+# Dismal kludge for building via brew from cvs after "make vanilla-tag".
+ifdef BEEHIVE_SRPM_BUILD
+export CHECKOUT_TAG ?= $(shell sed s/^.// CVS/Tag)
+tag-pattern = $(TAG_NAME)-$(TAG_VERSION)-0_%_$(TAG_RELEASE)
+ifeq (,$(filter-out $(tag-pattern),$(CHECKOUT_TAG)))
+variant := $(patsubst $(tag-pattern),%,$(CHECKOUT_TAG))
+srpm: SPECFILE := $(wildcard $(SPECFILE:.spec=-$(variant).spec) \
+			     $(SPECFILE:.spec=.t.$(variant).spec))
+srpm beehive-sprm: RELEASE := 0.$(variant).$(RELEASE)
+endif
+endif
+
+#
+# Hacks for building kernel rpms from upstream code plus local GIT branches.
+# Use "make git/BRANCH/TARGET" like "make TARGET".
+# Use "make git/BRANCH-fedora/TARGET" to include Fedora patches on top.
+#
+ifndef GIT_SPEC
+git/%:
+	@$(MAKE) GIT_SPEC=$(subst /,-,$(*D)) git-$(*F)
+else
+git-%: $(SPECFILE:.spec=.t.$(GIT_SPEC).spec)
+	@$(MAKE) GIT_SPEC= $* SPECFILE=$<
+endif
+
+#
+# Your git-branches.mk file can define GIT_DIR, e.g.:
+#	GIT_DIR = ${HOME}/kernel/.git
+# Make sure GIT_AUTHOR_NAME and GIT_AUTHOR_EMAIL are also set
+# or your rpm changelogs will look like crap.
+#
+# For each branch it can define a variable branch-BRANCH or tag-BRANCH
+# giving the parent of BRANCH to diff against in a separate patch.  If
+# the parent is unknown, it will use $(branch-upstream) defaulting to
+# "refs/remotes/upstream/master".
+#
+# Defining tag-BRANCH means the tag corresponds to an upstream patch in
+# the sources file, so that is used instead of generating a patch with
+# git.  If there is no tag-upstream defined, it will figure out a vNNN
+# tag or vNNN-gitN pseudo-tag from the last patch in the sources file.
+# For example:
+#	tag-some-hacks = v2.6.21-rc5
+#	branch-more-hacks = some-hacks
+# Leads to patches:
+#	git diff v2.6.21-rc5..more-hacks > linux-2.6.21-rc5-some-hacks.patch
+#	git diff some-hacks..more-hacks > linux-2.6.21-rc5-more-hacks.patch
+# Whereas having no git-branches.mk at all but doing
+# "make GIT_DIR=... git/mybranch/test-srpm" does:
+#	id=`cat patch-2.6.21-rc5-git4.id` # auto-fetched via upstream file
+#	git diff $id..upstream > linux-2.6.21-rc5-git4-upstream.patch
+#	git diff upstream..mybranch > linux-2.6.21-rc5-git4-mybranch.patch
+# If the upstream patch (or any branch patch) is empty it's left out.
+#
+git-branches.mk:;
+-include git-branches.mk
+
+branch-upstream ?= refs/remotes/upstream/master
+
+ifdef GIT_DIR
+export GIT_DIR
+export GIT_AUTHOR_NAME
+export GIT_AUTHOR_EMAIL
+gen-patches ?= gen-patches
+
+ifndef havespec
+$(SPECFILE:.spec=.t.%-fedora.spec): $(SPECFILE) $(gen-patches) FORCE
+	./$(gen-patches) --fedora < $< > $@ $(gen-patches-args)
+$(SPECFILE:.spec=.t.%.spec): $(SPECFILE) $(gen-patches) FORCE
+	./$(gen-patches) < $< > $@ $(gen-patches-args)
+.PRECIOUS: $(SPECFILE:.spec=.t.%.spec) $(SPECFILE:.spec=.t.%-fedora.spec)
+endif
+
+spec-%: $(SPECFILE:.spec=.t.%.spec) ;
+$(SPECFILE):;
+FORCE:;
+
+branch-of-* = $(firstword $(head-$*) $*)
+gen-patches-args = --name $* v$(KVERSION) $(call heads,$(branch-of-*))
+define heads
+$(if $(tag-$1),$(filter-out v$(KVERSION),$(tag-$1)),\
+     $(call heads,$(firstword $(branch-$1) $(branch-upstream)))) $1
+endef
+
+files-%-fedora:
+	@echo $(SPECFILE:.spec=.t.$*-fedora.spec)
+	@$(call list-patches,$(branch-of-*))
+files-%:
+	@echo $(SPECFILE:.spec=.t.$*.spec)
+	@$(call list-patches,$(branch-of-*))
+define list-patches
+$(if $(tag-$1),version=$(patsubst v%,%,$(tag-$1)),\
+     $(call list-patches,$(firstword $(branch-$1) $(branch-upstream)))); \
+echo linux-$${version}-$(patsubst refs/remotes/%/master,%,$1).patch
+endef
+
+ifndef tag-$(branch-upstream)
+tag-$(branch-upstream) := $(shell \
+	sed -n 's/^.*  *//;s/\.bz2$$//;s/patch-/v/;/^v/h;$${g;p}' sources)
+endif
+endif

Makefile.config

@@ -0,0 +1,105 @@
+# Make rules for configuration files.
+#
+# $Id$
+
+CFG		= kernel-$(VERSION)
+
+CONFIGFILES	= \
+	$(CFG)-i686.config $(CFG)-i686-debug.config \
+	$(CFG)-i686-PAE.config $(CFG)-i686-PAEdebug.config \
+	$(CFG)-x86_64.config $(CFG)-x86_64-debug.config \
+	$(CFG)-s390x.config $(CFG)-arm.config \
+	$(CFG)-ppc.config $(CFG)-ppc-smp.config \
+	$(CFG)-sparc64.config  \
+	$(CFG)-ppc64.config $(CFG)-ppc64-debug.config \
+	$(CFG)-ia64.config
+
+PLATFORMS	= x86 x86_64 powerpc powerpc32 powerpc64 s390x ia64 sparc64
+TEMPFILES	= $(addprefix temp-, $(addsuffix -generic, $(PLATFORMS)))
+
+configs: $(CONFIGFILES)
+	@rm -f kernel-*-config
+	@rm -f $(TEMPFILES)
+	@rm -f temp-generic temp-*-generic temp-*-generic-tmp
+
+# Augment the clean target to clean up our own cruft
+clean ::
+	@rm -fv $(CONFIGFILES) $(TEMPFILES) temp-generic kernel-$(VERSION)*config
+
+temp-generic: config-generic
+	cat config-generic config-nodebug > temp-generic
+
+temp-debug-generic: config-generic
+	cat config-generic config-debug > temp-debug-generic
+
+temp-x86-generic: config-x86-generic temp-generic
+	perl merge.pl $^  > $@
+
+temp-x86-debug-generic: config-x86-generic temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-x86_64-generic: config-x86_64-generic temp-generic
+	perl merge.pl $^  > $@
+
+temp-x86_64-debug-generic: config-x86_64-generic temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-sparc64-generic: config-sparc64-generic temp-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc-generic: config-powerpc-generic temp-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc-debug-generic: config-powerpc-generic temp-debug-generic
+	perl merge.pl $^  > $@
+
+temp-powerpc32-generic: config-powerpc32-generic temp-powerpc-generic
+	perl merge.pl $^  > $@
+
+temp-s390-generic: config-s390x temp-generic
+	perl merge.pl $^ > $@
+
+temp-ia64-generic: config-ia64-generic temp-generic
+	perl merge.pl $^ > $@
+
+kernel-$(VERSION)-i686-PAE.config: config-i686-PAE temp-x86-generic
+	perl merge.pl $^ i386 > $@
+
+kernel-$(VERSION)-i686-PAEdebug.config: config-i686-PAE temp-x86-debug-generic
+	perl merge.pl $^ i386 > $@
+
+kernel-$(VERSION)-i686.config: /dev/null temp-x86-generic
+	perl merge.pl $^ i386 > $@
+
+kernel-$(VERSION)-i686-debug.config: /dev/null temp-x86-debug-generic
+	perl merge.pl $^ i386 > $@
+
+kernel-$(VERSION)-x86_64.config: /dev/null temp-x86_64-generic
+	perl merge.pl $^ x86_64 > $@
+
+kernel-$(VERSION)-x86_64-debug.config: /dev/null temp-x86_64-debug-generic
+	perl merge.pl $^ x86_64 > $@
+
+kernel-$(VERSION)-sparc64.config: /dev/null temp-sparc64-generic
+	perl merge.pl $^ sparc64 > $@
+
+kernel-$(VERSION)-ppc64.config: config-powerpc64 temp-powerpc-generic
+	perl merge.pl $^ powerpc > $@
+
+kernel-$(VERSION)-ppc64-debug.config: config-powerpc64 temp-powerpc-debug-generic
+	perl merge.pl $^ powerpc > $@
+
+kernel-$(VERSION)-s390x.config: config-s390x temp-s390-generic
+	perl merge.pl $^ s390 > $@
+
+kernel-$(VERSION)-arm.config: config-arm temp-generic
+	perl merge.pl $^ arm > $@
+
+kernel-$(VERSION)-ppc.config: /dev/null temp-powerpc32-generic
+	perl merge.pl $^ powerpc > $@
+
+kernel-$(VERSION)-ppc-smp.config: config-powerpc32-smp temp-powerpc32-generic
+	perl merge.pl $^ powerpc > $@
+
+kernel-$(VERSION)-ia64.config: /dev/null temp-ia64-generic
+	perl merge.pl $^ ia64 > $@

Makefile.rhelver

@@ -1,45 +0,0 @@
-RHEL_MAJOR = 8
-RHEL_MINOR = 99
-
-#
-# RHEL_RELEASE
-# -------------
-#
-# Represents build number in 'release' part of RPM's name-version-release.
-#   name is <package_name>, e.g. kernel
-#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
-#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-RHEL_RELEASE = 122
-
-#
-# Early y+1 numbering
-# --------------------
-#
-# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
-# First is RHEL_RELEASE inherited/merged from y as-is, second number
-# is incremented with each build starting from 1. After merge from y,
-# it resets back to 1. This way y+1 nvr reflects status of last merge.
-#
-# Example:
-#
-# rhel8.0                        rhel-8.1
-#   kernel-4.18.0-58.el8   -->     kernel-4.18.0-58.1.el8
-#                                  kernel-4.18.0-58.2.el8
-#   kernel-4.18.0-59.el8           kernel-4.18.0-59.1.el8
-#   kernel-4.18.0-60.el8
-#   kernel-4.18.0-61.el8   -->     kernel-4.18.0-61.1.el8
-#
-#
-# Use this spot to avoid future merge conflicts.
-# Do not trim this comment.
-EARLY_YSTREAM ?= no
-EARLY_YBUILD:=
-EARLY_YRELEASE:=
-ifneq ("$(ZSTREAM)", "yes")
-  ifeq ("$(EARLY_YSTREAM)","yes")
-    RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
-  endif
-endif

Patchlist.changelog

@@ -1,228 +0,0 @@
-https://gitlab.com/cki-project/kernel-ark/-/commit/8773e8c6039ff74d1426cc80de30de759cd0c2a2
- 8773e8c6039ff74d1426cc80de30de759cd0c2a2 irq: export irq_check_status_bit
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e187313e5f0086538fefe0925ef84480f99616d8
- e187313e5f0086538fefe0925ef84480f99616d8 gcc-plugins: fix gcc 11 indigestion with plugins...
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc
- 0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc Fix up bad merge with efi: generalize efi_get_secureboot
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/364788093bdf437c33753d327136c363be8f756c
- 364788093bdf437c33753d327136c363be8f756c Fix up a merge issue with rxe.c
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a4d554ce883e24df77cce42bc2deec527028c213
- a4d554ce883e24df77cce42bc2deec527028c213 Filter out LTO build options from the perl ccopts
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/17b0f7f1d49df30661b517d668715ff5ee1bab09
- 17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e7c009cd91ababdbb5f726ef592c7800f0682d3a
- e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7120b2a26fc4c7954fd0395973dc6739c110e091
- 7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7a28e2fde653a161913abb8eee943cdacb5ff2ae
- 7a28e2fde653a161913abb8eee943cdacb5ff2ae x86: Fix compile issues with rh_check_supported()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/45f64c1a24e73af7987cffec3ea941e29364f87f
- 45f64c1a24e73af7987cffec3ea941e29364f87f e1000e: bump up timeout to wait when ME un-configure ULP mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6c14763b1ce98698949ff45135c15e333aa6416d
- 6c14763b1ce98698949ff45135c15e333aa6416d drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/67a19b16012b12cffba0b515c6503e5f8cdbb798
- 67a19b16012b12cffba0b515c6503e5f8cdbb798 drm: panel: add Xingbangda XBD599 panel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d220dbf98cef820367b5a2a2eeaacebee958bdd4
- d220dbf98cef820367b5a2a2eeaacebee958bdd4 dt-bindings: panel: add binding for Xingbangda XBD599 panel
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/80660062260dec4bdca9540922577542c16145e8
- 80660062260dec4bdca9540922577542c16145e8 ARM: fix __get_user_check() in case uaccess_* calls are not inlined
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/24d8743613b2a6a585fc68cfe95078d9a3d5b389
- 24d8743613b2a6a585fc68cfe95078d9a3d5b389 mm/kmemleak: skip late_init if not skip disable
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b697ff5e26974fee8fcd31a1e221e9dd41515efc
- b697ff5e26974fee8fcd31a1e221e9dd41515efc KEYS: Make use of platform keyring for module signature verify
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/081d2185e22479b449586c4e9843602ca0d49806
- 081d2185e22479b449586c4e9843602ca0d49806 Drop that for now
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5ef51389cf6673a0e9e004909c7be1dc785050b2
- 5ef51389cf6673a0e9e004909c7be1dc785050b2 Input: rmi4 - remove the need for artificial IRQ in case of HID
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/c1788012ebf8de46e9dc80d18051ed0c77c811b6
- c1788012ebf8de46e9dc80d18051ed0c77c811b6 ARM: tegra: usb no reset
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/577365feaa909db4c0949eabfcda7e4a972b8e54
- 577365feaa909db4c0949eabfcda7e4a972b8e54 arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/331be9c5a436057ee852075c102d9d90a9046a30
- 331be9c5a436057ee852075c102d9d90a9046a30 redhat: rh_kabi: deduplication friendly structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/34d79fbfb327f732ebf3ece4db21a14f81fedf03
- 34d79fbfb327f732ebf3ece4db21a14f81fedf03 redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07
- 93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07 redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/8e5c06356457f5351289e9f687b991189d163dae
- 8e5c06356457f5351289e9f687b991189d163dae redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/212cbccda77cc81fcb60123907eabdac8ad5adb7
- 212cbccda77cc81fcb60123907eabdac8ad5adb7 redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6f7744b412e1fb86a67d8761e64df69cf891b4ad
- 6f7744b412e1fb86a67d8761e64df69cf891b4ad redhat: rh_kabi: Add macros to size and extend structs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/049623d33998be30d79692c69b34acb502c496e3
- 049623d33998be30d79692c69b34acb502c496e3 Removing Obsolete hba pci-ids from rhel8
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/43ef1d631ecfe84084db3572c9ed1bedbdceb0f8
- 43ef1d631ecfe84084db3572c9ed1bedbdceb0f8 mptsas: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e5726695109dd1a73da92487b75de6a51d54c015
- e5726695109dd1a73da92487b75de6a51d54c015 mptsas: Taint kernel if mptsas is loaded
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16
- ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16 mptspi: pci-id table changes
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/bd305f716d8b64be1926bc7aebe02468ac6bf599
- bd305f716d8b64be1926bc7aebe02468ac6bf599 qla2xxx: Remove PCI IDs of deprecated adapter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/803ff9a2c660c094e14d246ef05019bf6008d503
- 803ff9a2c660c094e14d246ef05019bf6008d503 be2iscsi: remove unsupported device IDs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2cb24399321f555f18b0804d3fe02cf53949fba1
- 2cb24399321f555f18b0804d3fe02cf53949fba1 mptspi: Taint kernel if mptspi is loaded
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ad1740551ff4af49f1ef10a130783d9369e955a0
- ad1740551ff4af49f1ef10a130783d9369e955a0 hpsa: remove old cciss-based smartarray pci ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/4197ba3e766656eea9175c11ed05903620d98a28
- 4197ba3e766656eea9175c11ed05903620d98a28 qla4xxx: Remove deprecated PCI IDs from RHEL 8
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7e285aec22ab1213639afda877902db363473cb0
- 7e285aec22ab1213639afda877902db363473cb0 aacraid: Remove depreciated device and vendor PCI id's
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/846109a16be92155e69731c36dde48761d375153
- 846109a16be92155e69731c36dde48761d375153 megaraid_sas: remove deprecated pci-ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6fd2019d01cee7ff36dc047d3ecdb504b968f222
- 6fd2019d01cee7ff36dc047d3ecdb504b968f222 mpt*: remove certain deprecated pci-ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/dddcd5c1129b275ff160324036a662739db51fc3
- dddcd5c1129b275ff160324036a662739db51fc3 kernel: add SUPPORT_REMOVED kernel taint
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/08d77161dba915d1ed0d9fede658085440ab4474
- 08d77161dba915d1ed0d9fede658085440ab4474 Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e2dc2ca6a25a445bf22ceb6a8e38e02706605341
- e2dc2ca6a25a445bf22ceb6a8e38e02706605341 Add option of 13 for FORCE_MAX_ZONEORDER
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2384646bf71d8c282cf49bb20321fdf802c61cce
- 2384646bf71d8c282cf49bb20321fdf802c61cce s390: Lock down the kernel when the IPL secure flag is set
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5850c93175b9d2e1081873f4bbe08dead202cb08
- 5850c93175b9d2e1081873f4bbe08dead202cb08 efi: Lock down the kernel if booted in secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/53250b991f841be025fa4d264850dadc0fae2861
- 53250b991f841be025fa4d264850dadc0fae2861 efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/72223fd1241cc5c70b96a491db14d54c83beadd8
- 72223fd1241cc5c70b96a491db14d54c83beadd8 security: lockdown: expose a hook to lock the kernel down
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7ba28f03674fa9346610c3fea7fc93bc58f06d2a
- 7ba28f03674fa9346610c3fea7fc93bc58f06d2a Make get_cert_list() use efi_status_to_str() to print error messages.
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2ae9082db0b54d831a9b3782c049d9917e37d89f
- 2ae9082db0b54d831a9b3782c049d9917e37d89f Add efi_status_to_str() and rework efi_status_to_err().
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cee1461ada1b7e4b92cd154e7ec241119afcd644
- cee1461ada1b7e4b92cd154e7ec241119afcd644 Add support for deprecating processors
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2420149f8f5fa9dd1e2dc793765b498022922a81
- 2420149f8f5fa9dd1e2dc793765b498022922a81 arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/1d69b30b98b60aff639351f5788d20a3b17f6e27
- 1d69b30b98b60aff639351f5788d20a3b17f6e27 iommu/arm-smmu: workaround DMA mode issues
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/6b2e73e508e7a117b1db91596097c00e5570f64a
- 6b2e73e508e7a117b1db91596097c00e5570f64a rh_kabi: introduce RH_KABI_EXCLUDE
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ecb9206bce179eb600c52642a6753012a69ce4a2
- ecb9206bce179eb600c52642a6753012a69ce4a2 ipmi: do not configure ipmi for HPE m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/473be59fe72afa9969cf8d10609ef3f14f594631
- 473be59fe72afa9969cf8d10609ef3f14f594631 IB/rxe: Mark Soft-RoCE Transport driver as tech-preview
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/b94117795261f9c074a7addca2252238871b5081
- b94117795261f9c074a7addca2252238871b5081 scsi: smartpqi: add inspur advantech ids
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cae871558c333880c1687cab6f2a71accf40d105
- cae871558c333880c1687cab6f2a71accf40d105 ice: mark driver as tech-preview
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7d9cb007404211ea6638bde4a28dd0fbe8d95de0
- 7d9cb007404211ea6638bde4a28dd0fbe8d95de0 kABI: Add generic kABI macros to use for kABI workarounds
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/bd353e9aae8877dd490e6c92b67849e0dcfbab25
- bd353e9aae8877dd490e6c92b67849e0dcfbab25 add pci_hw_vendor_status()
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/41a259999969bbdfe9f556ce71f2c3c07d7454f4
- 41a259999969bbdfe9f556ce71f2c3c07d7454f4 ahci: thunderx2: Fix for errata that affects stop engine
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2a107343529ce648c11bff62e9f72bbeec738f3f
- 2a107343529ce648c11bff62e9f72bbeec738f3f Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/03e48a48f400a51a182a1254cf22ff0c08706d76
- 03e48a48f400a51a182a1254cf22ff0c08706d76 bpf: Add tech preview taint for syscall
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/607f0e89af7ef5682f79f2eea0a99638a1bc0c4f
- 607f0e89af7ef5682f79f2eea0a99638a1bc0c4f bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/31da227877eb734ddb484bc519aae85ce200802e
- 31da227877eb734ddb484bc519aae85ce200802e add Red Hat-specific taint flags
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/7a2e2c83be0230667756cccb5bc3687419dfbb8b
- 7a2e2c83be0230667756cccb5bc3687419dfbb8b kdump: fix a grammar issue in a kernel message
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/d345d54d33e7d496c9d845e4723550dd37cb3f88
- d345d54d33e7d496c9d845e4723550dd37cb3f88 tags.sh: Ignore redhat/rpm
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0
- 5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0 put RHEL info into generated headers
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/ce12884c009ec3bed11100c9d19f6d97628cf8ae
- ce12884c009ec3bed11100c9d19f6d97628cf8ae kdump: add support for crashkernel=auto
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/18fb1389afccdc5535977a10669b49a37829b55a
- 18fb1389afccdc5535977a10669b49a37829b55a kdump: round up the total memory size to 128M for crashkernel reservation
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/5fb9821441cc0b77101ad9c0dfaa747957a4cce4
- 5fb9821441cc0b77101ad9c0dfaa747957a4cce4 acpi: prefer booting with ACPI over DTS
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/0cf21a40db6fca5d89cf3d65808117c8c14e524e
- 0cf21a40db6fca5d89cf3d65808117c8c14e524e aarch64: acpi scan: Fix regression related to X-Gene UARTs
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/de13e14cc2388478d9a2c68c5d90affd92098f11
- de13e14cc2388478d9a2c68c5d90affd92098f11 ACPI / irq: Workaround firmware issue on X-Gene based m400
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/71c098f4afa38a15a95495c14f71fb087ab27308
- 71c098f4afa38a15a95495c14f71fb087ab27308 modules: add rhelversion MODULE_INFO tag
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/3247f9c838f4aa91aa5d08c152b385d61554d4b5
- 3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/e80982feaa68226ff60d2f83dace2016c35270d3
- e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/2987f9a606df106f5bdfa4113eb55356a21085a6
- 2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/a99885a5e77af594dfdce586cc83e5911d8401ce
- a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile
-
-https://gitlab.com/cki-project/kernel-ark/-/commit/cd3a5d30570279538623ea8a1255db0ee4b728f7
- cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile
-

README.rst

@@ -1,25 +0,0 @@
-===================
-The Kernel dist-git
-===================
-
-The kernel is maintained in a `source tree`_ rather than directly in dist-git.
-The specfile is maintained as a `template`_ in the source tree along with a set
-of build scripts to generate configurations, (S)RPMs, and to populate the
-dist-git repository.
-
-The `documentation`_ for the source tree covers how to contribute and maintain
-the tree.
-
-If you're looking for the downstream patch set it's available in the source
-tree with "git log master..ark-patches" or
-`online`_.
-
-Each release in dist-git is tagged in the source repository so you can easily
-check out the source tree for a build. The tags are in the format
-name-version-release, but note release doesn't contain the dist tag since the
-source can be built in different build roots (Fedora, CentOS, etc.)
-
-.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
-.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
-.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
-.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

README.txt

@@ -0,0 +1,67 @@
+
+		Kernel package tips & tricks.
+		~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The kernel is one of the more complicated packages in the distro, and
+for the newcomer, some of the voodoo in the spec file can be somewhat scary.
+This file attempts to document some of the magic.
+
+
+Speeding up make prep
+---------------------
+The kernel is nearly 500MB of source code, and as such, 'make prep'
+takes a while. The spec file employs some trickery so that repeated
+invocations of make prep don't take as long.  Ordinarily the %prep
+phase of a package will delete the tree it is about to untar/patch.
+The kernel %prep keeps around an unpatched version of the tree,
+and makes a symlink tree clone of that clean tree and than applies
+the patches listed in the spec to the symlink tree.
+This makes a huge difference if you're doing multiple make preps a day.
+As an added bonus, doing a diff between the clean tree and the symlink
+tree is slightly faster than it would be doing two proper copies of the tree.
+
+
+build logs.
+-----------
+There's a convenience helper script in scripts/grab-logs.sh
+that will grab the build logs from koji for the kernel version reported
+by make verrel
+
+
+config heirarchy.
+-----------------
+Instead of having to maintain a config file for every arch variant we build on,
+the kernel spec uses a nested system of configs.  At the top level, is
+config-generic. Add options here that should be present in every possible
+config on all architectures.
+Beneath this are per-arch overrides. For example config-x86-generic add
+additional x86 specific options, and also _override_ any options that were
+set in config-generic.
+There exist two additional overrides, config-debug, and config-nodebug,
+which override -generic, and the per-arch overrides. It is documented
+further below.
+
+debug options.
+--------------
+This is a little complicated, as the purpose & meaning of this changes
+depending on where we are in the release cycle.
+If we are building for a current stable release, 'make release' has
+typically been run already, which sets up the following..
+- Two builds occur, a 'kernel' and a 'kernel-debug' flavor.
+- kernel-debug will get various heavyweight debugging options like
+  lockdep etc turned on.
+
+If we are building for rawhide, 'make debug' has been run, which changes
+the status quo to:
+- We only build one kernel 'kernel'
+- The debug options from 'config-debug' are always turned on.
+This is done to increase coverage testing, as not many people actually
+run kernel-debug.
+
+To add new debug options, add an option to _both_ config-debug and config-nodebug,
+and also new stanzas to the Makefile 'debug' and 'release' targets.
+
+Sometimes debug options get added to config-generic, or per-arch overrides
+instead of config-[no]debug. In this instance, the options should have no
+discernable performance impact, otherwise they belong in the debug files.
+

acpi-ec-add-delay-before-write.patch

@@ -0,0 +1,51 @@
+https://bugzilla.kernel.org/show_bug.cgi?id=14733#c41
+
+diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
+index 27e0b92..09fbb69 100644
+--- a/drivers/acpi/ec.c
++++ b/drivers/acpi/ec.c
+@@ -226,6 +226,7 @@ static int ec_poll(struct acpi_ec *ec)
+ 				if (ec_transaction_done(ec))
+ 					return 0;
+ 			} else {
++				msleep(1);
+ 				if (wait_event_timeout(ec->wait,
+ 						ec_transaction_done(ec),
+ 						msecs_to_jiffies(1)))
+@@ -233,8 +234,8 @@ static int ec_poll(struct acpi_ec *ec)
+ 			}
+ 			advance_transaction(ec, acpi_ec_read_status(ec));
+ 		} while (time_before(jiffies, delay));
+-		if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
+-			break;
++//		if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
++//			break;
+ 		pr_debug(PREFIX "controller reset, restart transaction\n");
+ 		spin_lock_irqsave(&ec->curr_lock, flags);
+ 		start_transaction(ec);
+@@ -271,15 +272,24 @@ static int ec_check_ibf0(struct acpi_ec *ec)
+ 	return (status & ACPI_EC_FLAG_IBF) == 0;
+ }
+ 
++/* try to clean input buffer with burst_disable transaction */
++static int acpi_ec_clean_buffer(struct acpi_ec *ec)
++{
++	struct transaction t = {.command = ACPI_EC_BURST_DISABLE,
++				.wdata = NULL, .rdata = NULL,
++				.wlen = 0, .rlen = 0};
++	return acpi_ec_transaction_unlocked(ec, &t);
++}
++
+ static int ec_wait_ibf0(struct acpi_ec *ec)
+ {
+ 	unsigned long delay = jiffies + msecs_to_jiffies(ec_delay);
+ 	/* interrupt wait manually if GPE mode is not active */
+ 	while (time_before(jiffies, delay))
+ 		if (wait_event_timeout(ec->wait, ec_check_ibf0(ec),
+ 					msecs_to_jiffies(1)))
+ 			return 0;
+-	return -ETIME;
++	return acpi_ec_clean_buffer(ec);
+ }
+ 
+ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)

add-appleir-usb-driver.patch

@@ -0,0 +1,702 @@
+From e11e9e78799a7641fe0dc5289f35f2604a4b71a3 Mon Sep 17 00:00:00 2001
+From: Bastien Nocera <hadess@hadess.net>
+Date: Sun, 17 Jan 2010 00:40:15 +0000
+Subject: [PATCH] Input: add appleir USB driver
+
+This driver was originally written by James McKenzie, updated by
+Greg Kroah-Hartman, further updated by myself, with suspend support
+added.
+
+More recent versions of the IR receiver are also supported through
+a patch by Alex Karpenko. The patch also adds support for the 2nd
+and 5th generation of the controller, and the menu key on newer
+brushed metal remotes.
+
+Tested on a MacbookAir1,1
+
+Signed-off-by: Bastien Nocera <hadess@hadess.net>
+---
+ Documentation/input/appleir.txt |   46 ++++
+ drivers/hid/hid-apple.c         |    4 -
+ drivers/hid/hid-core.c          |    7 +-
+ drivers/hid/hid-ids.h           |    5 +-
+ drivers/input/misc/Kconfig      |   13 +
+ drivers/input/misc/Makefile     |    1 +
+ drivers/input/misc/appleir.c    |  519 +++++++++++++++++++++++++++++++++++++++
+ 7 files changed, 588 insertions(+), 7 deletions(-)
+ create mode 100644 Documentation/input/appleir.txt
+ create mode 100644 drivers/input/misc/appleir.c
+
+diff --git a/Documentation/input/appleir.txt b/Documentation/input/appleir.txt
+new file mode 100644
+index 0000000..db637fb
+--- /dev/null
++++ b/Documentation/input/appleir.txt
+@@ -0,0 +1,46 @@
++Apple IR receiver Driver (appleir)
++----------------------------------
++	Copyright (C) 2009 Bastien Nocera <hadess@hadess.net>
++
++The appleir driver is a kernel input driver to handle Apple's IR
++receivers (and associated remotes) in the kernel.
++
++The driver is an input driver which only handles "official" remotes
++as built and sold by Apple.
++
++Authors
++-------
++
++James McKenzie (original driver)
++Alex Karpenko (05ac:8242 support)
++Greg Kroah-Hartman (cleanups and original submission)
++Bastien Nocera (further cleanups, brushed metal "enter"
++button support and suspend support)
++
++Supported hardware
++------------------
++
++- All Apple laptops and desktops from 2005 onwards, except:
++  - the unibody Macbook (2009)
++  - Mac Pro (all versions)
++- Apple TV (all revisions prior to September 2010)
++
++The remote will only support the 6 (old white) or 7 (brushed metal) buttons
++of the remotes as sold by Apple. See the next section if you want to use
++other remotes or want to use lirc with the device instead of the kernel driver.
++
++Using lirc (native) instead of the kernel driver
++------------------------------------------------
++
++First, you will need to disable the kernel driver for the receiver.
++
++This can be achieved by passing quirks to the usbhid driver.
++The quirk line would be:
++usbhid.quirks=0x05ac:0x8242:0x40000010
++
++With 0x05ac being the vendor ID (Apple, you shouldn't need to change this)
++With 0x8242 being the product ID (check the output of lsusb for your hardware)
++And 0x10 being "HID_QUIRK_HIDDEV_FORCE" and 0x40000000 being "HID_QUIRK_NO_IGNORE"
++
++This should force the creation of a hiddev device for the receiver, and
++make it usable under lirc.
+diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
+index bba05d0..0059d5a 100644
+--- a/drivers/hid/hid-apple.c
++++ b/drivers/hid/hid-apple.c
+@@ -361,10 +361,6 @@ static void apple_remove(struct hid_device *hdev)
+ }
+ 
+ static const struct hid_device_id apple_devices[] = {
+-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL),
+-		.driver_data = APPLE_HIDDEV | APPLE_IGNORE_HIDINPUT },
+-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4),
+-		.driver_data = APPLE_HIDDEV | APPLE_IGNORE_HIDINPUT },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE),
+ 		.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
+ 
+diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
+index baa25ad..abc5bd7 100644
+--- a/drivers/hid/hid-core.c
++++ b/drivers/hid/hid-core.c
+@@ -1244,8 +1244,6 @@ static const struct hid_device_id hid_blacklist[] = {
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) },
+-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
+-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+ 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
+@@ -1577,6 +1575,11 @@ static const struct hid_device_id hid_ignore_list[] = {
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL2) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL3) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL5) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
+diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
+index 11af537..360a5ca 100644
+--- a/drivers/hid/hid-ids.h
++++ b/drivers/hid/hid-ids.h
+@@ -100,8 +100,11 @@
+ #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
+ #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
+ #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
+-#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241
++#define USB_DEVICE_ID_APPLE_IRCONTROL	0x8240
++#define USB_DEVICE_ID_APPLE_IRCONTROL2	0x1440
++#define USB_DEVICE_ID_APPLE_IRCONTROL3	0x8241
+ #define USB_DEVICE_ID_APPLE_IRCONTROL4	0x8242
++#define USB_DEVICE_ID_APPLE_IRCONTROL5	0x8243
+ 
+ #define USB_VENDOR_ID_ASUS		0x0486
+ #define USB_DEVICE_ID_ASUS_T91MT	0x0185
+diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
+index 60de906..2f2f2e7 100644
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -209,6 +209,19 @@ config INPUT_KEYSPAN_REMOTE
+ 	  To compile this driver as a module, choose M here: the module will
+ 	  be called keyspan_remote.
+ 
++config INPUT_APPLEIR
++	tristate "Apple infrared receiver (built in)"
++	depends on USB_ARCH_HAS_HCD
++	select USB
++	help
++	  Say Y here if you want to use a Apple infrared remote control. All
++	  the Apple computers from 2005 onwards include such a port, except
++	  the unibody Macbook (2009), and Mac Pros. This receiver is also
++	  used in the Apple TV set-top box prior to the 2010 model.
++
++	  To compile this driver as a module, choose M here: the module will
++	  be called appleir.
++
+ config INPUT_POWERMATE
+ 	tristate "Griffin PowerMate and Contour Jog support"
+ 	depends on USB_ARCH_HAS_HCD
+diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
+index 1fe1f6c..d5ef2b9 100644
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_INPUT_ADXL34X)		+= adxl34x.o
+ obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o
+ obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
+ obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
++obj-$(CONFIG_INPUT_APPLEIR)		+= appleir.o
+ obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
+ obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
+ obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
+diff --git a/drivers/input/misc/appleir.c b/drivers/input/misc/appleir.c
+new file mode 100644
+index 0000000..3817a3c
+--- /dev/null
++++ b/drivers/input/misc/appleir.c
+@@ -0,0 +1,519 @@
++/*
++ * appleir: USB driver for the apple ir device
++ *
++ * Original driver written by James McKenzie
++ * Ported to recent 2.6 kernel versions by Greg Kroah-Hartman <gregkh@suse.de>
++ *
++ * Copyright (C) 2006 James McKenzie
++ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
++ * Copyright (C) 2008 Novell Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the Free
++ * Software Foundation, version 2.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/input.h>
++#include <linux/usb/input.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/usb.h>
++#include <linux/usb/input.h>
++#include <asm/unaligned.h>
++#include <asm/byteorder.h>
++
++#define DRIVER_VERSION "v1.2"
++#define DRIVER_AUTHOR "James McKenzie"
++#define DRIVER_DESC "Apple infrared receiver driver"
++#define DRIVER_LICENSE "GPL"
++
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_LICENSE(DRIVER_LICENSE);
++
++#define USB_VENDOR_ID_APPLE			0x05ac
++#define USB_DEVICE_ID_APPLE_IRCONTROL		0x8240
++#define USB_DEVICE_ID_APPLE_IRCONTROL2		0x1440
++#define USB_DEVICE_ID_APPLE_IRCONTROL3		0x8241
++#define USB_DEVICE_ID_APPLE_IRCONTROL4		0x8242
++#define USB_DEVICE_ID_APPLE_IRCONTROL5		0x8243
++
++#define URB_SIZE	32
++
++#define MAX_KEYS	9
++#define MAX_KEYS_MASK	(MAX_KEYS - 1)
++
++#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
++
++static int debug;
++module_param(debug, int, 0644);
++MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
++
++/* I have two devices both of which report the following */
++/* 25 87 ee 83 0a  	+  */
++/* 25 87 ee 83 0c  	-  */
++/* 25 87 ee 83 09	<< */
++/* 25 87 ee 83 06	>> */
++/* 25 87 ee 83 05	>" */
++/* 25 87 ee 83 03	menu */
++/* 26 00 00 00 00	for key repeat*/
++
++/* Thomas Glanzmann reports the following responses */
++/* 25 87 ee ca 0b	+  */
++/* 25 87 ee ca 0d	-  */
++/* 25 87 ee ca 08	<< */
++/* 25 87 ee ca 07	>> */
++/* 25 87 ee ca 04	>" */
++/* 25 87 ee ca 02 	menu */
++/* 26 00 00 00 00       for key repeat*/
++/* He also observes the following event sometimes */
++/* sent after a key is release, which I interpret */
++/* as a flat battery message */
++/* 25 87 e0 ca 06	flat battery */
++
++/* Alexandre Karpenko reports the following responses for Device ID 0x8242 */
++/* 25 87 ee 47 0b	+  */
++/* 25 87 ee 47 0d	-  */
++/* 25 87 ee 47 08	<< */
++/* 25 87 ee 47 07	>> */
++/* 25 87 ee 47 04	>" */
++/* 25 87 ee 47 02 	menu */
++/* 26 87 ee 47 ** 	for key repeat (** is the code of the key being held) */
++
++/* Bastien Nocera's "new" remote */
++/* 25 87 ee 91 5f	followed by
++ * 25 87 ee 91 05	gives you >"
++ *
++ * 25 87 ee 91 5c	followed by
++ * 25 87 ee 91 05	gives you the middle button */
++
++static const unsigned short appleir_key_table[] = {
++	KEY_RESERVED,
++	KEY_MENU,
++	KEY_PLAYPAUSE,
++	KEY_FORWARD,
++	KEY_BACK,
++	KEY_VOLUMEUP,
++	KEY_VOLUMEDOWN,
++	KEY_ENTER,
++	KEY_RESERVED,
++};
++
++struct appleir {
++	struct input_dev *input_dev;
++	unsigned short keymap[ARRAY_SIZE(appleir_key_table)];
++	u8 *data;
++	dma_addr_t dma_buf;
++	struct usb_device *usbdev;
++	unsigned int flags;
++	struct urb *urb;
++	struct timer_list key_up_timer;
++	int current_key;
++	int prev_key_idx;
++	char phys[32];
++};
++
++static DEFINE_MUTEX(appleir_mutex);
++
++enum {
++	APPLEIR_OPENED = 0x1,
++	APPLEIR_SUSPENDED = 0x2,
++};
++
++static struct usb_device_id appleir_ids[] = {
++	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) },
++	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL2) },
++	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL3) },
++	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
++	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL5) },
++	{}
++};
++MODULE_DEVICE_TABLE(usb, appleir_ids);
++
++static void dump_packet(struct appleir *appleir, char *msg, u8 *data, int len)
++{
++	int i;
++
++	printk(KERN_ERR "appleir: %s (%d bytes)", msg, len);
++
++	for (i = 0; i < len; ++i)
++		printk(" %02x", data[i]);
++	printk(" (should be command %d)\n", (data[4] >> 1) & MAX_KEYS_MASK);
++}
++
++static int get_key(int data)
++{
++	switch (data) {
++	case 0x02:
++	case 0x03:
++		/* menu */
++		return 1;
++	case 0x04:
++	case 0x05:
++		/* >" */
++		return 2;
++	case 0x06:
++	case 0x07:
++		/* >> */
++		return 3;
++	case 0x08:
++	case 0x09:
++		/* << */
++		return 4;
++	case 0x0a:
++	case 0x0b:
++		/* + */
++		return 5;
++	case 0x0c:
++	case 0x0d:
++		/* - */
++		return 6;
++	case 0x5c:
++		/* Middle button, on newer remotes,
++		 * part of a 2 packet-command */
++		return -7;
++	default:
++		return -1;
++	}
++}
++
++static void key_up(struct appleir *appleir, int key)
++{
++	dbginfo(&appleir->input_dev->dev, "key %d up\n", key);
++	input_report_key(appleir->input_dev, key, 0);
++	input_sync(appleir->input_dev);
++}
++
++static void key_down(struct appleir *appleir, int key)
++{
++	dbginfo(&appleir->input_dev->dev, "key %d down\n", key);
++	input_report_key(appleir->input_dev, key, 1);
++	input_sync(appleir->input_dev);
++}
++
++static void battery_flat(struct appleir *appleir)
++{
++	dev_err(&appleir->input_dev->dev, "possible flat battery?\n");
++}
++
++static void key_up_tick(unsigned long data)
++{
++	struct appleir *appleir = (struct appleir *)data;
++
++	if (appleir->current_key) {
++		key_up(appleir, appleir->current_key);
++		appleir->current_key = 0;
++	}
++}
++
++static void new_data(struct appleir *appleir, u8 *data, int len)
++{
++	static const u8 keydown[] = { 0x25, 0x87, 0xee };
++	static const u8 keyrepeat[] = { 0x26, };
++	static const u8 flatbattery[] = { 0x25, 0x87, 0xe0 };
++
++	if (debug)
++		dump_packet(appleir, "received", data, len);
++
++	if (len != 5)
++		return;
++
++	if (!memcmp(data, keydown, sizeof(keydown))) {
++		int index;
++
++		/* If we already have a key down, take it up before marking
++		   this one down */
++		if (appleir->current_key)
++			key_up(appleir, appleir->current_key);
++
++		/* Handle dual packet commands */
++		if (appleir->prev_key_idx > 0)
++			index = appleir->prev_key_idx;
++		else
++			index = get_key(data[4]);
++
++		if (index > 0) {
++			appleir->current_key = appleir->keymap[index];
++
++			key_down(appleir, appleir->current_key);
++			/* Remote doesn't do key up, either pull them up, in the test
++			   above, or here set a timer which pulls them up after 1/8 s */
++			mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
++			appleir->prev_key_idx = 0;
++			return;
++		} else if (index == -7) {
++			/* Remember key for next packet */
++			appleir->prev_key_idx = 0 - index;
++			return;
++		}
++	}
++
++	appleir->prev_key_idx = 0;
++
++	if (!memcmp(data, keyrepeat, sizeof(keyrepeat))) {
++		key_down(appleir, appleir->current_key);
++		/* Remote doesn't do key up, either pull them up, in the test
++		   above, or here set a timer which pulls them up after 1/8 s */
++		mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
++		return;
++	}
++
++	if (!memcmp(data, flatbattery, sizeof(flatbattery))) {
++		battery_flat(appleir);
++		/* Fall through */
++	}
++
++	dump_packet(appleir, "unknown packet", data, len);
++}
++
++static void appleir_urb(struct urb *urb)
++{
++	struct appleir *appleir = urb->context;
++	int status = urb->status;
++	int retval;
++
++	switch (status) {
++	case 0:
++		new_data(appleir, urb->transfer_buffer, urb->actual_length);
++		break;
++	case -ECONNRESET:
++	case -ENOENT:
++	case -ESHUTDOWN:
++		/* This urb is terminated, clean up */
++		dbginfo(&appleir->input_dev->dev, "%s - urb shutting down with status: %d", __func__,
++			urb->status);
++		return;
++	default:
++		dbginfo(&appleir->input_dev->dev, "%s - nonzero urb status received: %d", __func__,
++			urb->status);
++	}
++
++	retval = usb_submit_urb(urb, GFP_ATOMIC);
++	if (retval)
++		err("%s - usb_submit_urb failed with result %d", __func__,
++		    retval);
++}
++
++static int appleir_open(struct input_dev *dev)
++{
++	struct appleir *appleir = input_get_drvdata(dev);
++	struct usb_interface *intf = usb_ifnum_to_if(appleir->usbdev, 0);
++	int r;
++
++	r = usb_autopm_get_interface(intf);
++	if (r) {
++		dev_err(&intf->dev,
++			"%s(): usb_autopm_get_interface() = %d\n", __func__, r);
++		return r;
++	}
++
++	mutex_lock(&appleir_mutex);
++
++	if (usb_submit_urb(appleir->urb, GFP_ATOMIC)) {
++		r = -EIO;
++		goto fail;
++	}
++
++	appleir->flags |= APPLEIR_OPENED;
++
++	mutex_unlock(&appleir_mutex);
++
++	usb_autopm_put_interface(intf);
++
++	return 0;
++fail:
++	mutex_unlock(&appleir_mutex);
++	usb_autopm_put_interface(intf);
++	return r;
++}
++
++static void appleir_close(struct input_dev *dev)
++{
++	struct appleir *appleir = input_get_drvdata(dev);
++
++	mutex_lock(&appleir_mutex);
++
++	if (!(appleir->flags & APPLEIR_SUSPENDED)) {
++		usb_kill_urb(appleir->urb);
++		del_timer_sync(&appleir->key_up_timer);
++	}
++
++	appleir->flags &= ~APPLEIR_OPENED;
++
++	mutex_unlock(&appleir_mutex);
++}
++
++static int appleir_probe(struct usb_interface *intf,
++			 const struct usb_device_id *id)
++{
++	struct usb_device *dev = interface_to_usbdev(intf);
++	struct usb_endpoint_descriptor *endpoint;
++	struct appleir *appleir = NULL;
++	struct input_dev *input_dev;
++	int retval = -ENOMEM;
++	int i;
++
++	appleir = kzalloc(sizeof(struct appleir), GFP_KERNEL);
++	if (!appleir)
++		goto allocfail;
++
++	appleir->data = usb_alloc_coherent(dev, URB_SIZE, GFP_KERNEL,
++					 &appleir->dma_buf);
++	if (!appleir->data)
++		goto usbfail;
++
++	appleir->urb = usb_alloc_urb(0, GFP_KERNEL);
++	if (!appleir->urb)
++		goto urbfail;
++
++	appleir->usbdev = dev;
++
++	input_dev = input_allocate_device();
++	if (!input_dev)
++		goto inputfail;
++
++	appleir->input_dev = input_dev;
++
++	usb_make_path(dev, appleir->phys, sizeof(appleir->phys));
++	strlcpy(appleir->phys, "/input0", sizeof(appleir->phys));
++
++	input_dev->name = "Apple Infrared Remote Controller";
++	input_dev->phys = appleir->phys;
++	usb_to_input_id(dev, &input_dev->id);
++	input_dev->dev.parent = &intf->dev;
++	input_dev->keycode = appleir->keymap;
++	input_dev->keycodesize = sizeof(unsigned short);
++	input_dev->keycodemax = ARRAY_SIZE(appleir->keymap);
++
++	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
++
++	memcpy(appleir->keymap, appleir_key_table, sizeof(appleir->keymap));
++	for (i = 0; i < ARRAY_SIZE(appleir_key_table); i++)
++		set_bit(appleir->keymap[i], input_dev->keybit);
++	clear_bit(KEY_RESERVED, input_dev->keybit);
++
++	input_set_drvdata(input_dev, appleir);
++	input_dev->open = appleir_open;
++	input_dev->close = appleir_close;
++
++	endpoint = &intf->cur_altsetting->endpoint[0].desc;
++
++	usb_fill_int_urb(appleir->urb, dev,
++			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
++			 appleir->data, 8,
++			 appleir_urb, appleir, endpoint->bInterval);
++
++	appleir->urb->transfer_dma = appleir->dma_buf;
++	appleir->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
++
++	setup_timer(&appleir->key_up_timer,
++		    key_up_tick, (unsigned long) appleir);
++
++	retval = input_register_device(appleir->input_dev);
++	if (retval)
++		goto inputfail;
++
++	usb_set_intfdata(intf, appleir);
++
++	return 0;
++
++inputfail:
++	input_free_device(appleir->input_dev);
++
++urbfail:
++	usb_free_urb(appleir->urb);
++
++usbfail:
++	usb_free_coherent(dev, URB_SIZE, appleir->data,
++			appleir->dma_buf);
++
++allocfail:
++	kfree(appleir);
++
++	return retval;
++}
++
++static void appleir_disconnect(struct usb_interface *intf)
++{
++	struct appleir *appleir = usb_get_intfdata(intf);
++
++	usb_set_intfdata(intf, NULL);
++	input_unregister_device(appleir->input_dev);
++	usb_free_urb(appleir->urb);
++	usb_free_coherent(interface_to_usbdev(intf), URB_SIZE,
++			appleir->data, appleir->dma_buf);
++	kfree(appleir);
++}
++
++static int appleir_suspend(struct usb_interface *interface,
++			   pm_message_t message)
++{
++	struct appleir *appleir = usb_get_intfdata(interface);
++
++	mutex_lock(&appleir_mutex);
++	if (appleir->flags & APPLEIR_OPENED)
++		usb_kill_urb(appleir->urb);
++
++	appleir->flags |= APPLEIR_SUSPENDED;
++
++	mutex_unlock(&appleir_mutex);
++
++	return 0;
++}
++
++static int appleir_resume(struct usb_interface *interface)
++{
++	struct appleir *appleir;
++	int r = 0;
++
++	appleir = usb_get_intfdata(interface);
++
++	mutex_lock(&appleir_mutex);
++	if (appleir->flags & APPLEIR_OPENED) {
++		struct usb_endpoint_descriptor *endpoint;
++
++		endpoint = &interface->cur_altsetting->endpoint[0].desc;
++		usb_fill_int_urb(appleir->urb, appleir->usbdev,
++				 usb_rcvintpipe(appleir->usbdev, endpoint->bEndpointAddress),
++				 appleir->data, 8,
++				 appleir_urb, appleir, endpoint->bInterval);
++		appleir->urb->transfer_dma = appleir->dma_buf;
++		appleir->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
++
++		/* And reset the USB device */
++		if (usb_submit_urb(appleir->urb, GFP_ATOMIC))
++			r = -EIO;
++	}
++
++	appleir->flags &= ~APPLEIR_SUSPENDED;
++
++	mutex_unlock(&appleir_mutex);
++
++	return r;
++}
++
++static struct usb_driver appleir_driver = {
++	.name                 = "appleir",
++	.probe                = appleir_probe,
++	.disconnect           = appleir_disconnect,
++	.suspend              = appleir_suspend,
++	.resume               = appleir_resume,
++	.reset_resume         = appleir_resume,
++	.id_table             = appleir_ids,
++};
++
++static int __init appleir_init(void)
++{
++	return usb_register(&appleir_driver);
++}
++
++static void __exit appleir_exit(void)
++{
++	usb_deregister(&appleir_driver);
++}
++
++module_init(appleir_init);
++module_exit(appleir_exit);
+-- 
+1.7.2.2
+

bluetooth-device-ids-for-ath3k-on-pegatron-lucid-tablets.patch

@@ -0,0 +1,37 @@
+From: Andy Ross <andy.ross@windriver.com>
+Date: Mon, 9 May 2011 23:11:16 +0000 (-0700)
+Subject: Bluetooth: Device ids for ath3k on Pegatron Lucid tablets
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fpadovan%2Fbluetooth-next-2.6.git;a=commitdiff_plain;h=2a7bccccdb9604a717c2128a931f022267d35629
+
+Bluetooth: Device ids for ath3k on Pegatron Lucid tablets
+
+New ath3k device IDs used on the Pegatron Lucid (ExoPC and WeTab) units.
+
+Signed-off-by: Andy Ross <andy.ross@windriver.com>
+Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
+---
+
+diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
+index 695d441..6bacef3 100644
+--- a/drivers/bluetooth/ath3k.c
++++ b/drivers/bluetooth/ath3k.c
+@@ -62,6 +62,7 @@ static struct usb_device_id ath3k_table[] = {
+ 
+ 	/* Atheros AR3011 with sflash firmware*/
+ 	{ USB_DEVICE(0x0CF3, 0x3002) },
++	{ USB_DEVICE(0x13d3, 0x3304) },
+ 
+ 	/* Atheros AR9285 Malbec with sflash firmware */
+ 	{ USB_DEVICE(0x03F0, 0x311D) },
+diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
+index 762a510..c2de895 100644
+--- a/drivers/bluetooth/btusb.c
++++ b/drivers/bluetooth/btusb.c
+@@ -104,6 +104,7 @@ static struct usb_device_id blacklist_table[] = {
+ 
+ 	/* Atheros 3011 with sflash firmware */
+ 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
++	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+ 
+ 	/* Atheros AR9285 Malbec with sflash firmware */
+ 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },

check-kabi

@@ -1,149 +0,0 @@
-#!/usr/bin/python3
-#
-# check-kabi - Red Hat kABI reference checking tool
-#
-# We use this script to check against reference Module.kabi files.
-#
-# Author: Jon Masters <jcm@redhat.com>
-# Copyright (C) 2007-2009 Red Hat, Inc.
-#
-# This software may be freely redistributed under the terms of the GNU
-# General Public License (GPL).
-
-# Changelog:
-#
-# 2018/06/01 - Update for python3 by Petr Oros.
-# 2009/08/15 - Updated for use in RHEL6.
-# 2007/06/13 - Initial rewrite in python by Jon Masters.
-
-__author__ = "Jon Masters <jcm@redhat.com>"
-__version__ = "2.0"
-__date__ = "2009/08/15"
-__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
-__license__ = "GPL"
-
-import getopt
-import string
-import sys
-
-true = 1
-false = 0
-
-
-def load_symvers(symvers, filename):
-    """Load a Module.symvers file."""
-
-    symvers_file = open(filename, "r")
-
-    while true:
-        in_line = symvers_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type = in_line.split()
-
-        symvers[symbol] = in_line[0:-1]
-
-
-def load_kabi(kabi, filename):
-    """Load a Module.kabi file."""
-
-    kabi_file = open(filename, "r")
-
-    while true:
-        in_line = kabi_file.readline()
-        if in_line == "":
-            break
-        if in_line == "\n":
-            continue
-        checksum, symbol, directory, type = in_line.split()
-
-        kabi[symbol] = in_line[0:-1]
-
-
-def check_kabi(symvers, kabi):
-    """Check Module.kabi and Module.symvers files."""
-
-    fail = 0
-    warn = 0
-    changed_symbols = []
-    moved_symbols = []
-
-    for symbol in kabi:
-        abi_hash, abi_sym, abi_dir, abi_type = kabi[symbol].split()
-        if symbol in symvers:
-            sym_hash, sym_sym, sym_dir, sym_type = symvers[symbol].split()
-            if abi_hash != sym_hash:
-                fail = 1
-                changed_symbols.append(symbol)
-
-            if abi_dir != sym_dir:
-                warn = 1
-                moved_symbols.append(symbol)
-        else:
-            fail = 1
-            changed_symbols.append(symbol)
-
-    if fail:
-        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
-        print("")
-        print("The following symbols have been changed (this will cause an ABI breakage):")
-        print("")
-        for symbol in changed_symbols:
-            print(symbol)
-        print("")
-
-    if warn:
-        print("*** WARNING - ABI SYMBOLS MOVED ***")
-        print("")
-        print("The following symbols moved (typically caused by moving a symbol from being")
-        print("provided by the kernel vmlinux out to a loadable module):")
-        print("")
-        for symbol in moved_symbols:
-            print(symbol)
-        print("")
-
-    """Halt the build, if we got errors and/or warnings. In either case,
-       double-checkig is required to avoid introducing / concealing
-       KABI inconsistencies."""
-    if fail or warn:
-        sys.exit(1)
-    sys.exit(0)
-
-
-def usage():
-    print("""
-check-kabi: check Module.kabi and Module.symvers files.
-
-    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
-
-""")
-
-
-if __name__ == "__main__":
-
-    symvers_file = ""
-    kabi_file = ""
-
-    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
-
-    for o, v in opts:
-        if o == "-s":
-            symvers_file = v
-        if o == "-h":
-            usage()
-            sys.exit(0)
-        if o == "-k":
-            kabi_file = v
-
-    if (symvers_file == "") or (kabi_file == ""):
-        usage()
-        sys.exit(1)
-
-    symvers = {}
-    kabi = {}
-
-    load_symvers(symvers, symvers_file)
-    load_kabi(kabi, kabi_file)
-    check_kabi(symvers, kabi)

config-arm

@@ -0,0 +1,149 @@
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_SMP is not set
+
+# CONFIG_CMDLINE_FORCE is not set
+
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+
+CONFIG_ARCH_VERSATILE=y
+CONFIG_ARCH_VERSATILE_PB=y
+CONFIG_MACH_VERSATILE_AB=y
+
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+
+# CONFIG_XIP_KERNEL is not set
+
+CONFIG_ATAGS_PROC=y
+
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
+CONFIG_VFP=y
+
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_TRACE is not set
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+CONFIG_ARM_THUMB=y
+
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/sda1 rootdelay=20"
+
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+# CONFIG_CPU_IDLE is not set
+
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_IMPA7=y
+
+CONFIG_AX88796=m
+CONFIG_AX88796_93CX6=y
+CONFIG_SMC91X=m
+CONFIG_DM9000=m
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+
+CONFIG_SERIO_AMBAKMI=m
+
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+
+CONFIG_I2C_VERSATILE=y
+
+CONFIG_THERMAL=y
+
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+
+CONFIG_FB_ARMCLCD=m
+
+CONFIG_SND_ARM=y
+CONFIG_SND_ARMAACI=m
+
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_TUSB6010=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+CONFIG_MMC_ARMMMCI=m
+CONFIG_MMC_DW=m
+# CONFIG_MMC_DW_IDMAC is not set
+
+CONFIG_RTC_DRV_PL030=m
+CONFIG_RTC_DRV_PL031=m
+
+# CONFIG_SGI_IOC4 is not set
+
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+CONFIG_ARM_UNWIND=y
+
+CONFIG_RCU_FANOUT=32
+
+# CONFIG_USB_ULPI is not set
+# CONFIG_OC_ETM is not set
+
+# CONFIG_MTD_PISMO is not set
+
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_COUNTERS=y
+
+# CONFIG_MG_DISK is not set
+# CONFIG_GPIO_PL061 is not set
+
+CONFIG_CC_STACKPROTECTOR=y
+
+CONFIG_AUTO_ZRELADDR=y
+
+# CONFIG_ARM_CHARLCD is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+# CONFIG_ARM_SP805_WATCHDOG is not set
+
+CONFIG_PM_OPP=y
+
+CONFIG_SECCOMP=y
+CONFIG_STRICT_DEVMEM=y
+
+# CONFIG_AMBA_PL08X is not set
+
+# CONFIG_HVC_DCC is not set
+
+CONFIG_SPARSE_IRQ=y
+
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+
+CONFIG_FTMAC100=m
+
+CONFIG_HWSPINLOCK_OMAP=m
+
+CONFIG_USE_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_MTD_PHYSMAP_OF=m
+CONFIG_SERIAL_OF_PLATFORM=m
+CONFIG_MMC_SDHCI_OF=m

config-debug

@@ -0,0 +1,100 @@
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_PROVE_RCU=y
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+CONFIG_DEBUG_PER_CPU_MAPS=y
+CONFIG_CPUMASK_OFFSTACK=y
+
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_FAIL_IO_TIMEOUT=y
+
+CONFIG_SLUB_DEBUG_ON=y
+
+CONFIG_LOCK_STAT=y
+
+CONFIG_DEBUG_STACK_USAGE=y
+
+CONFIG_ACPI_DEBUG=y
+# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+
+CONFIG_DEBUG_SG=y
+
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+
+CONFIG_X86_PTDUMP=y
+
+CONFIG_CAN_DEBUG_DEVICES=y
+
+CONFIG_MODULE_FORCE_UNLOAD=y
+
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+CONFIG_DEBUG_NOTIFIERS=y
+
+CONFIG_DMA_API_DEBUG=y
+
+CONFIG_MMIOTRACE=y
+
+CONFIG_DEBUG_CREDENTIALS=y
+
+CONFIG_EXT4_DEBUG=y
+
+CONFIG_DEBUG_PERF_USE_VMALLOC=y
+
+# off in both production debug and nodebug builds,
+#  on in rawhide nodebug builds
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+
+CONFIG_JBD2_DEBUG=y
+
+CONFIG_DEBUG_CFQ_IOSCHED=y
+
+CONFIG_DRBD_FAULT_INJECTION=y
+
+CONFIG_ATH_DEBUG=y
+CONFIG_CARL9170_DEBUGFS=y
+CONFIG_IWLWIFI_DEVICE_TRACING=y
+
+CONFIG_DEBUG_OBJECTS_WORK=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+CONFIG_DMADEVICES_DEBUG=y
+CONFIG_DMADEVICES_VDEBUG=y
+
+CONFIG_PM_ADVANCED_DEBUG=y
+
+CONFIG_CEPH_LIB_PRETTYDEBUG=y
+CONFIG_QUOTA_DEBUG=y
+
+CONFIG_PCI_DEFAULT_USE_CRS=y
+
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+
+CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
+CONFIG_TEST_LIST_SORT=y
+
+CONFIG_DEBUG_SET_MODULE_RONX=y

config-i686-PAE

@@ -0,0 +1,9 @@
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
+# CONFIG_OLPC_OPENFIRMWARE is not set
+
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_SYS_HYPERVISOR=y
+
+# I2O only works on non-PAE 32-bit x86
+# CONFIG_I2O is not set

config-ia64-generic

@@ -0,0 +1,213 @@
+#
+# Automatically generated make config: don't edit
+#
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+# CONFIG_XEN is not set
+CONFIG_MMU=y
+CONFIG_EFI=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_SGI_SN2 is not set
+CONFIG_IA64_ESI=y
+CONFIG_IA64_HP_AML_NFW=y
+CONFIG_MSPEC=y
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_NUMA=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_IA64_MCA_RECOVERY=m
+CONFIG_IA64_CYCLONE=y
+CONFIG_MMTIMER=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_NR_CPUS=1024
+# CONFIG_IA32_SUPPORT is not set
+# CONFIG_COMPAT is not set
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_EFI_VARS=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=16
+CONFIG_EFI_PCDP=y
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_BLK_DEV_SGIIOC4=y
+
+#
+# Character devices
+#
+CONFIG_TCG_INFINEON=m
+
+#
+# Watchdog Cards
+#
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_EFI_RTC=y
+CONFIG_RTC_DRV_EFI=y
+
+
+#
+# AGP
+#
+CONFIG_AGP_I460=y
+CONFIG_AGP_HP_ZX1=y
+CONFIG_AGP_SGI_TIOCA=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# SGI
+#
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+CONFIG_SGI_IOC3=m
+CONFIG_SGI_IOC4=y
+CONFIG_SGI_XP=m
+CONFIG_SGI_GRU=m
+# CONFIG_SGI_GRU_DEBUG is not set
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+CONFIG_SERIAL_SGI_IOC3=m
+CONFIG_SERIAL_SGI_IOC4=m
+
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_BUSLOGIC is not set
+
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+# CONFIG_ACPI_BATTERY is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+CONFIG_ACPI_BUTTON=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_HOTPLUG_MEMORY=y
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_TOSHIBA is not set
+CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_PROC_EVENT is not set
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+CONFIG_SENSORS_ACPI_POWER=m
+
+CONFIG_PM=y
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HPET is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+CONFIG_HOTPLUG_PCI_SGI=m
+CONFIG_PNPACPI=y
+
+CONFIG_SCHED_SMT=y
+
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+
+CONFIG_IA64_ACPI_CPUFREQ=m
+
+# CONFIG_PERMIT_BSP_REMOVE is not set
+# CONFIG_FORCE_CPEI_RETARGET is not set
+
+CONFIG_NODES_SHIFT=10
+
+
+CONFIG_HW_RANDOM_INTEL=m
+
+CONFIG_CRASH_DUMP=y
+CONFIG_PROC_VMCORE=y
+
+# drivers/media/video/usbvision/usbvision-i2c.c:64:39: error: macro "outb" passed 4 arguments, but takes just 2
+# CONFIG_VIDEO_USBVISION is not set
+
+# CONFIG_IA64_MC_ERR_INJECT is not set
+
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+
+CONFIG_SENSORS_I5K_AMB=m
+
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+CONFIG_FRAME_WARN=2048
+
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+
+CONFIG_HP_ILO=m
+
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_PARAVIRT=y
+
+CONFIG_DMAR_DEFAULT_ON=y
+
+CONFIG_RCU_FANOUT=64
+
+CONFIG_ACPI_POWER_METER=m
+CONFIG_I2C_SCMI=m
+
+# CONFIG_HP_ACCEL is not set

config-nodebug

@@ -0,0 +1,100 @@
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_CPUMASK_OFFSTACK=y
+
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
+
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FAILSLAB is not set
+# CONFIG_FAIL_PAGE_ALLOC is not set
+# CONFIG_FAIL_MAKE_REQUEST is not set
+# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
+# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
+# CONFIG_FAIL_IO_TIMEOUT is not set
+
+# CONFIG_SLUB_DEBUG_ON is not set
+
+# CONFIG_LOCK_STAT is not set
+
+# CONFIG_DEBUG_STACK_USAGE is not set
+
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+
+# CONFIG_DEBUG_SG is not set
+
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
+# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+
+# CONFIG_X86_PTDUMP is not set
+
+# CONFIG_CAN_DEBUG_DEVICES is not set
+
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+# CONFIG_DEBUG_NOTIFIERS is not set
+
+# CONFIG_DMA_API_DEBUG is not set
+
+# CONFIG_MMIOTRACE is not set
+
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+# off in both production debug and nodebug builds,
+#  on in rawhide nodebug builds
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+
+# CONFIG_EXT4_DEBUG is not set
+
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+
+# CONFIG_JBD2_DEBUG is not set
+
+# CONFIG_DEBUG_CFQ_IOSCHED is not set
+
+# CONFIG_DRBD_FAULT_INJECTION is not set
+
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_CARL9170_DEBUGFS is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+
+# CONFIG_DEBUG_OBJECTS_WORK is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_DMADEVICES_VDEBUG is not set
+
+CONFIG_PM_ADVANCED_DEBUG=y
+
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_QUOTA_DEBUG is not set
+
+CONFIG_PCI_DEFAULT_USE_CRS=y
+
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+
+# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
+# CONFIG_TEST_LIST_SORT is not set
+
+# CONFIG_DEBUG_SET_MODULE_RONX is not set

config-powerpc-generic

@@ -0,0 +1,357 @@
+# Most PowerPC kernels we build are SMP
+CONFIG_SMP=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC=y
+CONFIG_WATCHDOG_RTAS=m
+CONFIG_DEBUGGER=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_ALTIVEC=y
+
+CONFIG_TAU=y
+# CONFIG_TAU_INT is not set
+CONFIG_TAU_AVERAGE=y
+
+CONFIG_SECCOMP=y
+
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEBUG=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+
+CONFIG_PM=y
+
+CONFIG_PM_STD_PARTITION=""
+
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_GEN_RTC_X is not set
+CONFIG_RTC_DRV_GENERIC=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+
+CONFIG_ADB=y
+CONFIG_ADB_PMU=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM112=y
+CONFIG_I2C_POWERMAC=y
+CONFIG_APPLE_AIRPORT=m
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+CONFIG_AGP_UNINORTH=y
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_NVIDIA=m
+# CONFIG_FB_VGA16 is not set
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+
+CONFIG_BOOTX_TEXT=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_CAPI_EICON=y
+
+CONFIG_NVRAM=y
+
+# CONFIG_PCMCIA_M8XX is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_NI52 is not set
+# CONFIG_NI65 is not set
+# CONFIG_LANCE is not set
+# CONFIG_3C515 is not set
+# CONFIG_ELPLUS is not set
+
+CONFIG_MEMORY_HOTPLUG=y
+
+# Stuff which wants bus_to_virt() or virt_to_bus()
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+
+
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+
+# FIXME: Should depend on IA64/x86
+# CONFIG_SGI_IOC4 is not set
+
+CONFIG_PPC_EFIKA=y
+CONFIG_PPC_MEDIA5200=y
+
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PMAC_RACKMETER=m
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+
+CONFIG_SENSORS_AMS=m
+CONFIG_SENSORS_AMS_PMU=y
+CONFIG_SENSORS_AMS_I2C=y
+
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_MTD_PHYSMAP_OF=m
+CONFIG_IDE_PROC_FS=y
+CONFIG_MACINTOSH_DRIVERS=y
+
+CONFIG_PPC_PASEMI_MDIO=m
+CONFIG_SPU_FS_64K_LS=y
+CONFIG_PPC_PASEMI_CPUFREQ=y
+CONFIG_PMAC_APM_EMU=m
+CONFIG_HW_RANDOM_PASEMI=m
+
+CONFIG_EDAC=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_PASEMI=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+
+CONFIG_AXON_RAM=m
+CONFIG_OPROFILE_CELL=y
+
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_MTD_OF_PARTS=m
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_THERMAL=y
+
+# CONFIG_MEMORY_HOTREMOVE is not set
+
+CONFIG_DMADEVICES=y
+# CONFIG_FSL_DMA is not set
+
+CONFIG_SND_PPC=y
+
+CONFIG_PPC_82xx=y
+CONFIG_PPC_83xx=y
+CONFIG_PPC_86xx=y
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_RAPIDIO is not set
+# CONFIG_FS_ENET is not set
+# CONFIG_UCC_GETH is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_QE is not set
+# CONFIG_I2C_CPM is not set
+
+
+CONFIG_SERIO_XILINX_XPS_PS2=m
+
+# CONFIG_PPC_SMLPAR is not set
+
+CONFIG_MGCOGE=y
+CONFIG_GEF_SBC610=y
+CONFIG_GEF_PPC9A=y
+CONFIG_GEF_SBC310=y
+
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_MPC8xxx_GPIO=y
+
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_IDE_GD_ATAPI=y
+
+CONFIG_MCU_MPC8349EMITX=m
+
+CONFIG_GPIO_XILINX=y
+
+CONFIG_PMIC_DA903X=y
+CONFIG_BACKLIGHT_DA903X=m
+CONFIG_LEDS_DA903X=m
+
+CONFIG_MSI_BITMAP_SELFTEST=y
+
+CONFIG_RELOCATABLE=y
+
+# CONFIG_HVC_UDBG is not set
+CONFIG_PRINT_STACK_DEPTH=64
+
+CONFIG_BATTERY_DA9030=m
+# CONFIG_TWL4030_CORE is not set
+
+CONFIG_BLK_DEV_IT8172=m
+CONFIG_TOUCHSCREEN_DA9034=m
+
+CONFIG_SIMPLE_GPIO=y
+
+CONFIG_FSL_PQ_MDIO=m
+
+CONFIG_PS3_VRAM=m
+CONFIG_MDIO_GPIO=m
+CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=m
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+
+# CONFIG_USB_FHCI_HCD is not set
+# CONFIG_FHCI_DEBUG is not set
+
+# CONFIG_DRM_RADEON_KMS is not set
+
+# CONFIG_AMIGAONE is not set
+
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+
+CONFIG_DTL=y
+
+CONFIG_MMC_SDHCI_OF=m
+
+# CONFIG_CONSISTENT_SIZE_BOOL is not set
+
+CONFIG_CAN_SJA1000_OF_PLATFORM=m
+
+CONFIG_PPC_EMULATED_STATS=y
+
+CONFIG_SWIOTLB=y
+
+# CONFIG_RDS is not set
+
+CONFIG_PPC_DISABLE_WERROR=y
+
+CONFIG_XILINX_LL_TEMAC=m
+CONFIG_XILINX_EMACLITE=m
+
+CONFIG_GPIO_WM831X=m
+# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIO_UCB1400 is not set
+CONFIG_EDAC_MPC85XX=m
+
+CONFIG_NR_IRQS=512
+CONFIG_SPARSE_IRQ=y
+
+CONFIG_PPC_MPC5200_LPBFIFO=m
+CONFIG_CAN_MSCAN=m
+CONFIG_CAN_MPC5XXX=m
+CONFIG_PATA_MACIO=m
+CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
+# CONFIG_MMC_SDHCI_OF_ESDHC is not set
+# CONFIG_MMC_SDHCI_OF_HLWD is not set
+
+# CONFIG_MFD_TC35892 is not set
+
+# CONFIG_GPIO_SCH is not set
+
+# CONFIG_PPC_MPC512x is not set
+
+CONFIG_MPC512X_DMA=m
+
+CONFIG_KVM_GUEST=y
+
+CONFIG_I2C_MPC=m
+
+# CONFIG_IMA is not set
+# CONFIG_TCG_TPM is not set
+
+CONFIG_RFKILL_GPIO=m
+
+CONFIG_CRYPTO_DEV_FSL_CAAM=m
+CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=255
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=2048
+CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=m

config-powerpc32-generic

@@ -0,0 +1,187 @@
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+# CONFIG_PPC64 is not set
+# CONFIG_RTAS_PROC is not set
+# CONFIG_PCMCIA_M8XX is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_CPU_FREQ_PMAC=y
+CONFIG_PPC_CHRP=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_PREP=y
+
+# CONFIG_PPC_MPC5200_SIMPLE is not set
+CONFIG_SATA_FSL=m
+# CONFIG_SATA_NV is not set
+
+# busted in .28git1
+# ERROR: "cacheable_memzero" [drivers/net/gianfar_driver.ko] undefined!
+# CONFIG_GIANFAR is not set
+CONFIG_USB_EHCI_FSL=y
+
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_BACKLIGHT=y
+
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHMEM_START_BOOL is not set
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+# CONFIG_TASK_SIZE_BOOL is not set
+# CONFIG_KERNEL_START_BOOL is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_SCSI_MESH=m
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
+
+CONFIG_SCSI_MAC53C94=m
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_MACIO=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_BMAC=m
+CONFIG_MACE=m
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_MV643XX_ETH=m
+CONFIG_I2C_HYDRA=m
+CONFIG_I2C_MPC=m
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+# CONFIG_ANSLCD is not set
+
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_BDI_SWITCH is not set
+
+CONFIG_MAC_FLOPPY=m
+# CONFIG_BLK_DEV_FD is not set
+
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY=y
+CONFIG_FB_MATROX=y
+# CONFIG_KEXEC is not set
+
+# CONFIG_HVC_RTAS is not set
+
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_BRIQ_PANEL=m
+
+# CONFIG_ATA_PIIX is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ATIIXP is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_SERVERWORKS is not set
+
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_MPC5200_WDT is not set
+CONFIG_8xxx_WDT=m
+CONFIG_GEF_WDT=m
+
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_FEC_MPC52xx=m
+#CHECK: This may later become a tristate.
+CONFIG_FEC_MPC52xx_MDIO=y
+CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_MDIO_GPIO=m
+
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+
+# CONFIG_VIRQ_DEBUG is not set
+
+CONFIG_PPC_BESTCOMM_ATA=m
+CONFIG_PPC_BESTCOMM_FEC=m
+CONFIG_PPC_BESTCOMM_GEN_BD=m
+
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PAGE_OFFSET_BOOL is not set
+# CONFIG_FB_FSL_DIU is not set
+CONFIG_IRQSTACKS=y
+CONFIG_VIRTUALIZATION=y
+
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_HTC_EGPIO is not set
+
+# CONFIG_TIFM_CORE is not set
+
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+
+# CONFIG_I2C_NFORCE2 is not set
+
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+
+# CONFIG_MEMSTICK is not set
+
+# CONFIG_IPMI_HANDLER is not set
+
+# PPC gets sad with debug alloc (bz 448598)
+# CONFIG_DEBUG_PAGEALLOC is not set
+
+CONFIG_SND_ISA=y
+CONFIG_CRYPTO_DEV_TALITOS=m
+
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_MPC8272_ADS=y
+CONFIG_PQ2FADS=y
+CONFIG_EP8248E=y
+CONFIG_MPC830x_RDB=y
+CONFIG_MPC831x_RDB=y
+CONFIG_MPC832x_MDS=y
+CONFIG_MPC832x_RDB=y
+CONFIG_MPC834x_MDS=y
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
+CONFIG_MPC837x_MDS=y
+CONFIG_MPC837x_RDB=y
+CONFIG_SBC834x=y
+CONFIG_ASP834x=y
+CONFIG_KMETER1=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+
+# CONFIG_USB_MUSB_HDRC is not set
+
+# busted in 2.6.27
+# drivers/mtd/maps/sbc8240.c: In function 'init_sbc8240_mtd':
+# drivers/mtd/maps/sbc8240.c:172: warning: passing argument 1 of 'simple_map_init' from incompatible pointer type
+# drivers/mtd/maps/sbc8240.c:177: error: 'struct mtd_info' has no member named 'module'
+
+CONFIG_MTD_NAND_FSL_UPM=m
+
+CONFIG_RCU_FANOUT=32
+
+CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+
+CONFIG_KVM_BOOK3S_32=m
+
+# CONFIG_SCSI_QLA_ISCSI is not set
+
+CONFIG_BATTERY_PMU=m

config-powerpc32-smp

@@ -0,0 +1,4 @@
+CONFIG_SMP=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_NR_CPUS=4
+# CONFIG_BATTERY_PMU is not set

config-powerpc64

@@ -0,0 +1,190 @@
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM121=y
+CONFIG_PPC_PMAC64=y
+CONFIG_PPC_MAPLE=y
+CONFIG_PPC_CELL=y
+CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_PPC_ISERIES=y
+CONFIG_PPC_PSERIES=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_PASEMI=y
+# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
+CONFIG_PPC_PS3=y
+CONFIG_PPC_CELLEB=y
+CONFIG_PPC_CELL_QPACE=y
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_ADVANCED=y
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_VUART=y
+CONFIG_PS3_PS3AV=y
+CONFIG_PS3_STORAGE=m
+CONFIG_PS3_DISK=m
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
+CONFIG_PS3_LPM=y
+CONFIG_SND_PS3=m
+CONFIG_SND_PS3_DEFAULT_START_DELAY=1000
+CONFIG_GELIC_NET=m
+CONFIG_GELIC_WIRELESS=y
+CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
+CONFIG_CBE_THERM=m
+CONFIG_CBE_CPUFREQ=m
+CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_CBE_CPUFREQ_PMI_ENABLE=y
+CONFIG_PMAC_RACKMETER=m
+CONFIG_IBMEBUS=y
+CONFIG_SPU_FS=m
+CONFIG_RTAS_FLASH=y
+CONFIG_PPC_SPLPAR=y
+CONFIG_SCANLOG=y
+CONFIG_LPARCFG=y
+CONFIG_SERIAL_ICOM=m
+CONFIG_HVCS=m
+CONFIG_HVC_CONSOLE=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_THERM_PM72=y
+CONFIG_IBMVETH=m
+CONFIG_SCSI_IBMVSCSI=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+CONFIG_HOTPLUG_PCI_RPA=m
+CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_PMAC_SMU=y
+CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_SCSI_IPR=m
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+CONFIG_SPIDER_NET=m
+CONFIG_HVC_RTAS=y
+CONFIG_HVC_ISERIES=y
+CONFIG_CBE_RAS=y
+
+# iSeries device drivers
+#
+CONFIG_ISERIES_VETH=m
+CONFIG_VIODASD=m
+CONFIG_VIOCD=m
+CONFIG_VIOTAPE=m
+
+CONFIG_PASEMI_MAC=m
+CONFIG_SERIAL_OF_PLATFORM=m
+
+CONFIG_PPC_PASEMI_IOMMU=y
+CONFIG_SERIAL_TXX9=y
+CONFIG_SERIAL_TXX9_NR_UARTS=6
+CONFIG_SERIAL_TXX9_CONSOLE=y
+
+CONFIG_HVC_BEAT=y
+
+CONFIG_FB_PS3=y
+CONFIG_FB_PS3_DEFAULT_SIZE_M=18
+
+CONFIG_PPC_PMI=m
+CONFIG_PS3_SYS_MANAGER=y
+# CONFIG_BLK_DEV_CELLEB is not set
+
+CONFIG_PATA_SCC=m
+
+CONFIG_APM_EMULATION=m
+
+CONFIG_PPC64=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_NR_CPUS=128
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+
+# CONFIG_POWER4_ONLY is not set
+
+CONFIG_RTAS_PROC=y
+CONFIG_IOMMU_VMERGE=y
+CONFIG_NUMA=y
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_SCHED_SMT=y
+
+# CONFIG_MV643XX_ETH is not set
+CONFIG_IRQSTACKS=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_INPUT_PCSPKR is not set
+
+CONFIG_EHEA=m
+CONFIG_INFINIBAND_EHCA=m
+
+CONFIG_HCALL_STATS=y
+
+CONFIG_XMON_DISASSEMBLY=y
+
+CONFIG_SCSI_IBMVSCSIS=m
+
+CONFIG_SECCOMP=y
+
+# CONFIG_TUNE_CELL is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_IBM_NEW_EMAC=m
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_ELECTRA_CF=m
+
+CONFIG_MTD_NAND_PASEMI=m
+CONFIG_EDAC_CELL=m
+CONFIG_EDAC_CPC925=m
+CONFIG_FRAME_WARN=2048
+
+CONFIG_PHYP_DUMP=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_VIRTUALIZATION=y
+
+CONFIG_VSX=y
+
+CONFIG_SCSI_IBMVFC=m
+# CONFIG_SCSI_IBMVFC_TRACE is not set
+CONFIG_IBM_BSR=m
+
+CONFIG_SERIO_XILINX_XPS_PS2=m
+
+CONFIG_PPC_IBM_CELL_RESETBUTTON=y
+CONFIG_PPC_IBM_CELL_POWERBUTTON=m
+CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
+
+CONFIG_RTC_DRV_PS3=y
+
+CONFIG_CRASH_DUMP=y
+CONFIG_RELOCATABLE=y
+
+CONFIG_RCU_FANOUT=64
+
+CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+
+CONFIG_KVM_BOOK3S_64=m
+# CONFIG_KVM_EXIT_TIMING is not set
+
+#-- bz#607175
+#-- active memory sharing
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
+#-- DLPAR memory remove
+# CONFIG_SPARSEMEM_VMEMMAP is not set
+
+CONFIG_PSERIES_ENERGY=m
+
+CONFIG_PPC_ICSWX=y
+CONFIG_IO_EVENT_IRQ=y
+CONFIG_HW_RANDOM_AMD=m

config-rhel-generic

@@ -0,0 +1,203 @@
+# CONFIG_ISA is not set
+# CONFIG_ISAPNP is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_DC390T is not set
+
+# CONFIG_ATALK is not set
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
+# CONFIG_IPX is not set
+# CONFIG_IPDDP is not set
+# CONFIG_DECNET is not set
+# CONFIG_PLIP is not set
+
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_WD80x3 is not set
+# CONFIG_I82092 is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_ULTRA is not set
+# CONFIG_SKFP is not set
+# CONFIG_DE600 is not set
+# CONFIG_DE620 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_AC3200 is not set
+# CONFIG_NI52 is not set
+# CONFIG_NI65 is not set
+# CONFIG_LANCE is not set
+# CONFIG_EL16 is not set
+# CONFIG_EL3 is not set
+# CONFIG_3C515 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_HP100 is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_ATP is not set
+
+# CONFIG_TR is not set
+
+# CONFIG_GAMEPORT is not set
+
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+
+# CONFIG_WAN_ROUTER is not set
+
+# CONFIG_BINFMT_AOUT is not set
+
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_SIS is not set
+
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+
+# CONFIG_I2O is not set
+
+# CONFIG_MWAVE is not set
+
+# CONFIG_ROCKETPORT is not set
+# CONFIG_R3964 is not set
+
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MIROPCM20 is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_BWQCAM is not set
+# CONFIG_VIDEO_CQCAM is not set
+# CONFIG_VIDEO_W9966 is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA_PP is not set
+# CONFIG_VIDEO_CPIA_USB is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_ZORAN_BUZ is not set
+# CONFIG_VIDEO_ZORAN_DC10 is not set
+# CONFIG_VIDEO_ZORAN_DC30 is not set
+# CONFIG_VIDEO_ZORAN_LML33 is not set
+# CONFIG_VIDEO_ZORAN_LML33R10 is not set
+# CONFIG_VIDEO_MEYE is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+
+# CONFIG_INFTL is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PCI is not set
+
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_HGA_ACCEL is not set
+# CONFIG_FB_3DFX_ACCEL is not set
+
+# CONFIG_JFS_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_9P_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+

config-s390x

@@ -0,0 +1,240 @@
+CONFIG_64BIT=y
+# CONFIG_MARCH_G5 is not set
+# CONFIG_MARCH_Z900 is not set
+CONFIG_MARCH_Z9_109=y
+# CONFIG_MARCH_Z990 is not set
+
+CONFIG_NR_CPUS=64
+CONFIG_COMPAT=y
+
+# See bug 496596
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# See bug 496605
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+CONFIG_MMU=y
+
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NO_IDLE_HZ=y
+
+CONFIG_SMP=y
+
+#
+# I/O subsystem configuration
+#
+CONFIG_QDIO=m
+
+#
+# Misc
+#
+CONFIG_IPL=y
+# CONFIG_IPL_TAPE is not set
+CONFIG_IPL_VM=y
+# CONFIG_PROCESS_DEBUG is not set
+CONFIG_PFAULT=y
+CONFIG_SHARED_KERNEL=y
+CONFIG_CMM=m
+CONFIG_CMM_PROC=y
+# CONFIG_NETIUCV is not set
+CONFIG_SMSGIUCV=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ZFCP=m
+CONFIG_ZFCPDUMP=y
+CONFIG_CCW=y
+
+#
+# S/390 block device drivers
+#
+CONFIG_DCSSBLK=m
+CONFIG_BLK_DEV_XPRAM=m
+CONFIG_DASD=m
+CONFIG_DASD_PROFILE=y
+CONFIG_DASD_ECKD=m
+CONFIG_DASD_FBA=m
+CONFIG_DASD_DIAG=m
+CONFIG_DASD_EER=y
+
+#
+# S/390 character device drivers
+#
+CONFIG_TN3270=y
+CONFIG_TN3270_CONSOLE=y
+CONFIG_TN3215=y
+CONFIG_TN3215_CONSOLE=y
+CONFIG_CCW_CONSOLE=y
+CONFIG_SCLP_TTY=y
+CONFIG_SCLP_CONSOLE=y
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_SCLP_CPI=m
+CONFIG_SCLP_ASYNC=m
+CONFIG_S390_TAPE=m
+CONFIG_S390_TAPE_3590=m
+
+CONFIG_APPLDATA_BASE=y
+CONFIG_APPLDATA_MEM=m
+CONFIG_APPLDATA_OS=m
+CONFIG_APPLDATA_NET_SUM=m
+CONFIG_TN3270_TTY=y
+CONFIG_TN3270_FS=m
+
+
+#
+# S/390 tape interface support
+#
+CONFIG_S390_TAPE_BLOCK=y
+
+#
+# S/390 tape hardware support
+#
+CONFIG_S390_TAPE_34XX=m
+
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Token Ring devices
+#
+CONFIG_TR=y
+CONFIG_NETCONSOLE=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# S/390 network device drivers
+#
+CONFIG_LCS=m
+CONFIG_CTC=m
+CONFIG_IUCV=m
+CONFIG_QETH=m
+CONFIG_QETH_IPV6=y
+CONFIG_CCWGROUP=m
+
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_B44 is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_OSF_PARTITION is not set
+CONFIG_IBM_PARTITION=y
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+
+
+#
+# S390 crypto hw
+#
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+
+#
+# Kernel hacking
+#
+
+#
+# S390 specific stack options; needs gcc 3.5 so off for now
+#
+CONFIG_PACK_STACK=y
+CONFIG_CHECK_STACK=y
+# CONFIG_WARN_STACK is not set
+# CONFIG_SMALL_STACK is not set
+
+CONFIG_ZVM_WATCHDOG=m
+CONFIG_VMLOGRDR=m
+CONFIG_MONREADER=m
+
+CONFIG_VIRT_CPU_ACCOUNTING=y
+
+# CONFIG_CLAW is not set
+
+# CONFIG_ATMEL is not set
+
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MII is not set
+
+
+CONFIG_STACK_GUARD=256
+CONFIG_CMM_IUCV=y
+
+# CONFIG_DETECT_SOFTLOCKUP is not set
+
+CONFIG_S390_HYPFS_FS=y
+
+CONFIG_MONWRITER=m
+CONFIG_ZCRYPT=m
+CONFIG_ZCRYPT_MONOLITHIC=y
+
+CONFIG_S390_EXEC_PROTECT=y
+CONFIG_AFIUCV=m
+CONFIG_S390_PRNG=m
+
+CONFIG_S390_VMUR=m
+
+# CONFIG_THERMAL is not set
+
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CTCM=m
+CONFIG_QETH_L2=m
+CONFIG_QETH_L3=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_S390_GUEST=y
+
+
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_CHSC_SCH=m
+
+# drivers/isdn/hardware/mISDN/hfcmulti.c:5255:2: error: #error "not running on big endian machines now"
+# CONFIG_MISDN_HFCMULTI is not set
+
+CONFIG_HVC_IUCV=y
+
+CONFIG_RCU_FANOUT=64
+
+CONFIG_SECCOMP=y
+
+CONFIG_PM=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/jokes"
+
+CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+
+CONFIG_SMSGIUCV_EVENT=m
+
+# CONFIG_PREEMPT_TRACER is not set
+
+CONFIG_VMCP=y
+
+CONFIG_ZFCP_DIF=y
+
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_BOOK=y
+
+CONFIG_STRICT_DEVMEM=y
+
+# CONFIG_WARN_DYNAMIC_STACK is not set
+
+CONFIG_JUMP_LABEL=y
+CONFIG_CRYPTO_GHASH_S390=m

config-sparc64-generic

@@ -0,0 +1,209 @@
+CONFIG_SMP=y
+CONFIG_SPARC=y
+CONFIG_SPARC64=y
+CONFIG_SECCOMP=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_DEBUG=y
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_US3_FREQ=m
+CONFIG_US2E_FREQ=m
+
+CONFIG_SUN_LDOMS=y
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+CONFIG_64BIT=y
+# CONFIG_BBC_I2C is not set
+CONFIG_HUGETLB_PAGE_SIZE_4MB=y
+# CONFIG_HUGETLB_PAGE_SIZE_512K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+CONFIG_NR_CPUS=256
+CONFIG_US3_FREQ=m
+CONFIG_US2E_FREQ=m
+CONFIG_SUN_OPENPROMFS=m
+CONFIG_COMPAT=y
+CONFIG_UID16=y
+CONFIG_BINFMT_ELF32=y
+CONFIG_ENVCTRL=m
+CONFIG_DISPLAY7SEG=m
+CONFIG_WATCHDOG_CP1XXX=m
+CONFIG_WATCHDOG_RIO=m
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_LIRC_PARALLEL is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_ALI1535=m
+# CONFIG_VGASTATE is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BW2 is not set
+CONFIG_FB_CG3=y
+CONFIG_FB_CG6=y
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+CONFIG_FB_ATY=y
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+CONFIG_FB_SBUS=y
+CONFIG_FB_FFB=y
+# CONFIG_FB_TCX is not set
+# CONFIG_FB_CG14 is not set
+CONFIG_FB_PM2=y
+CONFIG_FB_P9100=y
+# CONFIG_FB_LEO is not set
+CONFIG_FB_XVR500=y
+CONFIG_FB_XVR2500=y
+# CONFIG_VGASTATE is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM_NOUVEAU is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_SUN8x16=y
+CONFIG_FONT_SUN12x22=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNZILOG_CONSOLE=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_SERIAL_SUNSAB=y
+CONFIG_SERIAL_SUNSAB_CONSOLE=y
+CONFIG_SERIAL_SUNHV=y
+CONFIG_SUN_OPENPROMIO=y
+CONFIG_OBP_FLASH=m
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_BLK_DEV_FD=y
+CONFIG_SUNVDC=m
+CONFIG_SUNVNET=m
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+CONFIG_SCSI_QLOGICPTI=m
+CONFIG_SCSI_SUNESP=m
+CONFIG_SUNLANCE=m
+CONFIG_SUNBMAC=m
+CONFIG_SUNQE=m
+# CONFIG_DM9102 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+CONFIG_ATM_FORE200E_USE_TASKLET=y
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_FORE200E_TX_RETRY=16
+# CONFIG_DRM_TDFX is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_SPARCSPKR=m
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SND_SUN_AMD7930 is not set
+CONFIG_SND_SUN_CS4231=m
+# CONFIG_SND_SUN_DBRI is not set
+CONFIG_PARPORT_SUNBPP=m
+CONFIG_LOGO_SUN_CLUT224=y
+CONFIG_MTD_SUN_UFLASH=m
+CONFIG_MYRI_SBUS=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_IEEE1394_SBP2 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_DCFLUSH is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_LOCKDEP is not set
+# CONFIG_STACK_DEBUG is not set
+
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+# CONFIG_THERMAL is not set
+
+CONFIG_FRAME_WARN=2048
+
+CONFIG_NUMA=y
+
+CONFIG_SND_SPARC=y
+
+CONFIG_HW_RANDOM_N2RNG=m
+
+# drivers/isdn/hardware/mISDN/hfcmulti.c:5255:2: error: #error "not running on big endian machines now"
+# CONFIG_MISDN_HFCMULTI is not set
+
+CONFIG_US3_MC=y
+CONFIG_SENSORS_ULTRA45=m
+CONFIG_LEDS_SUNFIRE=m
+CONFIG_TADPOLE_TS102_UCTRL=m
+
+CONFIG_RCU_FANOUT=64
+
+CONFIG_LIRC_ENE0100=m
+# CONFIG_BATTERY_DS2782 is not set
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+CONFIG_LSM_MMAP_MIN_ADDR=65536
+
+CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+
+CONFIG_EARLYFB=y
+CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
+
+CONFIG_GRETH=m
+CONFIG_FB_XVR1000=y
+
+CONFIG_CRYPTO_DEV_NIAGARA2=y
+
+CONFIG_JUMP_LABEL=y
+
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MMC_SDHCI_OF is not set

config-x86-generic

@@ -0,0 +1,571 @@
+CONFIG_UID16=y
+# CONFIG_64BIT is not set
+# CONFIG_KERNEL_LZMA is not set
+
+#
+# Processor type and features
+#
+#
+# Enable summit and co via the generic arch
+#
+CONFIG_X86_EXTENDED_PLATFORM=y
+CONFIG_X86_32_NON_STANDARD=y
+
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+CONFIG_X86_BIGSMP=y
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_RDC321X is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+CONFIG_M686=y
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=64
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_HPET=y
+CONFIG_HPET_TIMER=y
+# CONFIG_HPET_MMAP is not set
+CONFIG_X86_MCE=y
+CONFIG_TOSHIBA=m
+CONFIG_I8K=m
+CONFIG_SONYPI=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_MICROCODE=m
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
+CONFIG_EDD=m
+# CONFIG_EDD_OFF is not set
+# CONFIG_NUMA is not set
+
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MTRR=y
+CONFIG_X86_PAT=y
+CONFIG_X86_PM_TIMER=y
+
+CONFIG_EFI=y
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+
+CONFIG_DMAR=y
+CONFIG_DMAR_BROKEN_GFX_WA=y
+CONFIG_DMAR_FLOPPY_WA=y
+CONFIG_DMAR_DEFAULT_ON=y
+
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
+
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_GOANY=y
+
+#
+# x86 specific drivers
+#
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_ADVANSYS=m
+
+CONFIG_CC_STACKPROTECTOR=y
+
+CONFIG_SECCOMP=y
+
+CONFIG_CAPI_EICON=y
+
+# I2O enabled only for 32-bit x86, disabled for PAE kernel
+CONFIG_I2O=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_I2O_CONFIG=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_CONFIG_OLD_IOCTL=y
+CONFIG_I2O_BUS=m
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
+
+#
+# Kernel debugging
+#
+CONFIG_X86_MPPARSE=y
+
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_THERMAL=y
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_PROC_EVENT is not set
+CONFIG_PNPACPI=y
+CONFIG_ACPI_POWER_METER=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_GHES=m
+# CONFIG_ACPI_APEI_EINJ is not set
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+
+#
+# CPUFreq processor drivers
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEBUG=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_PCC_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+# e_powersaver is dangerous
+# CONFIG_X86_E_POWERSAVER is not set
+
+CONFIG_X86_HT=y
+CONFIG_X86_TRAMPOLINE=y
+
+#
+# various x86 specific drivers
+#
+CONFIG_NVRAM=y
+CONFIG_IBM_ASM=m
+CONFIG_CRYPTO_TWOFISH_586=m
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_SCHED_SMT=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_4KSTACKS is not set
+CONFIG_DEBUG_NMI_TIMEOUT=5
+
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_BIOS=y
+
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# SHPC has half-arsed PCI probing, which makes it load on too many systems
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+CONFIG_PM=y
+
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+
+CONFIG_BLK_DEV_AMD74XX=y
+
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+CONFIG_SCx200_ACB=m
+
+# CONFIG_X86_REBOOTFIXUPS is not set
+
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+
+CONFIG_GPIO_SCH=m
+CONFIG_PC8736x_GPIO=m
+# CONFIG_NSC_GPIO is not set
+CONFIG_CS5535_GPIO=m
+
+CONFIG_EDAC=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_AMD76X=m
+CONFIG_EDAC_E7XXX=m
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82860=m
+CONFIG_EDAC_I82875P=m
+CONFIG_EDAC_I82975X=m
+CONFIG_EDAC_I3000=m
+CONFIG_EDAC_I5000=m
+CONFIG_EDAC_I5100=m
+CONFIG_EDAC_I5400=m
+CONFIG_EDAC_R82600=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_EDAC_I7CORE=m
+CONFIG_EDAC_I3000=m
+CONFIG_EDAC_I7300=m
+CONFIG_EDAC_X38=m
+
+CONFIG_SCHED_MC=y
+
+CONFIG_SND_ISA=y
+CONFIG_SND_ES18XX=m
+
+CONFIG_TCG_INFINEON=m
+
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+
+
+# CONFIG_COMPAT_VDSO is not set
+
+# CONFIG_SGI_IOC4 is not set
+
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ASUS_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_EEEPC_WMI=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_ACPI_WMI=m
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_TC1100_WMI=m
+CONFIG_HP_WMI=m
+# CONFIG_INTEL_SCU_IPC is not set
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_XO15_EBOOK=m
+CONFIG_INTEL_OAKTRAIL=m
+
+# CONFIG_TOUCHSCREEN_INTEL_MID is not set
+
+# CONFIG_SMSC37B787_WDT is not set
+CONFIG_W83697HF_WDT=m
+CONFIG_IB700_WDT=m
+
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x400000
+CONFIG_PHYSICAL_START=0x400000
+CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
+CONFIG_PROC_VMCORE=y
+CONFIG_CRASH=m
+
+CONFIG_CRYPTO_DEV_GEODE=m
+
+CONFIG_VIDEO_CAFE_CCIC=m
+
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_LGUEST=m
+
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_PARAVIRT=y
+# CONFIG_PARAVIRT_DEBUG is not set
+
+# PARAVIRT_SPINLOCKS has a 5% perf hit
+# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_KVM_CLOCK=y
+CONFIG_KVM_GUEST=y
+CONFIG_KVM_MMU_AUDIT=y # default $x would be nice...
+CONFIG_LGUEST_GUEST=y
+CONFIG_VMI=y
+
+CONFIG_XEN=y
+# CONFIG_XEN_DEBUG is not set
+CONFIG_XEN_MAX_DOMAIN_MEMORY=8
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_SAVE_RESTORE=y
+CONFIG_HVC_XEN=y
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_KBDDEV_FRONTEND=y
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_XEN_WDT=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_DEBUG_FS=y
+CONFIG_XEN_PLATFORM_PCI=m
+CONFIG_XEN_GNTDEV=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
+
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_NAND_CAFE=m
+
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+CONFIG_THINKPAD_ACPI=m
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+
+CONFIG_MACINTOSH_DRIVERS=y
+
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+
+CONFIG_DMADEVICES=y
+CONFIG_INTEL_IOATDMA=m
+
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ACPI_POWER=m
+
+# CONFIG_CPA_DEBUG is not set
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+
+CONFIG_HP_WATCHDOG=m
+CONFIG_NV_TCO=m
+CONFIG_SP5100_TCO=m
+
+CONFIG_OLPC=y
+CONFIG_OLPC_OPENFIRMWARE=y
+CONFIG_BATTERY_OLPC=y
+CONFIG_MOUSE_PS2_OLPC=y
+
+# staging
+# CONFIG_FB_OLPC_DCON is not set
+
+CONFIG_STRICT_DEVMEM=y
+
+# CONFIG_NO_BOOTMEM is not set
+
+# CONFIG_MEMTEST is not set
+# CONFIG_MAXSMP is not set
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_SYSPROF_TRACER=y
+
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_MMIOTRACE_TEST is not set
+
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+
+CONFIG_HP_ILO=m
+
+CONFIG_BACKLIGHT_APPLE=m
+
+CONFIG_OPROFILE_IBS=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW_64K=y
+
+# CONFIG_CMDLINE_BOOL is not set
+
+CONFIG_PANASONIC_LAPTOP=m
+
+CONFIG_X86_PTRACE_BTS=y
+
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+
+CONFIG_POWER_TRACER=y
+CONFIG_HW_BRANCH_TRACER=y
+
+# CONFIG_SPARSE_IRQ is not set
+
+CONFIG_RCU_FANOUT=32
+
+# CONFIG_IOMMU_STRESS is not set
+
+CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+# CONFIG_X86_ANCIENT_MCE is not set
+# CONFIG_X86_MCE_INJECT is not set
+
+# CONFIG_X86_MRST is not set
+CONFIG_SFI=y
+
+CONFIG_INPUT_WINBOND_CIR=m
+CONFIG_I2C_SCMI=m
+CONFIG_I2C_PXA=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EDAC_I3200=m
+CONFIG_EDAC_DECODE_MCE=m
+
+# CONFIG_GPIO_LANGWELL is not set
+
+# CONFIG_INTEL_TXT is not set
+
+CONFIG_CS5535_MFGPT=m
+CONFIG_GEODE_WDT=m
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+
+CONFIG_LEDS_INTEL_SS4200=m
+
+CONFIG_X86_DECODER_SELFTEST=y
+
+CONFIG_ACPI_CMPC=m
+CONFIG_MSI_WMI=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+# CONFIG_SAMSUNG_LAPTOP is not set
+
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_LPC_SCH=m
+
+CONFIG_PCI_CNB20LE_QUIRK=y
+
+CONFIG_ACPI_EC_DEBUGFS=m
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_INTEL_IDLE=y
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+CONFIG_SENSORS_PKGTEMP=m
+CONFIG_F71808E_WDT=m
+CONFIG_HPWDT_NMI_DECODING=y
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_INTEL_MID_DMAC is not set
+CONFIG_PCH_DMA=m
+# CONFIG_ACPI_QUICKSTART is not set
+CONFIG_IDEAPAD_ACPI=m
+CONFIG_INTEL_IPS=m
+# CONFIG_IBM_RTL is not set
+
+CONFIG_OLPC_XO1=m
+CONFIG_XO1_RFKILL=m
+CONFIG_VIDEO_VIA_CAMERA=m
+
+CONFIG_EDAC_MCE_INJ=m
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_X86_RESERVE_LOW=64
+
+CONFIG_PCH_GBE=m
+CONFIG_PCH_PHUB=m
+
+CONFIG_JUMP_LABEL=y
+
+CONFIG_X86_32_IRIS=m
+
+CONFIG_TRANSPARENT_HUGEPAGE=y
+
+CONFIG_CRYPTO_AES_NI_INTEL=y
+CONFIG_CRYPTO_AES_586=y
+
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_PHYSMAP_OF=m
+CONFIG_PROC_DEVICETREE=y
+CONFIG_SERIAL_OF_PLATFORM=m
+CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
+# CONFIG_MMC_SDHCI_OF is not set
+
+CONFIG_HP_ACCEL=m
+
+# CONFIG_RAPIDIO is not set

config-x86_64-generic

@@ -0,0 +1,476 @@
+CONFIG_64BIT=y
+CONFIG_UID16=y
+# CONFIG_KERNEL_LZMA is not set
+
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_EXTENDED_PLATFORM=y
+# CONFIG_X86_VSMP is not set
+# CONFIG_X86_UV is not set
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
+CONFIG_MTRR=y
+CONFIG_NUMA=y
+CONFIG_K8_NUMA=y
+CONFIG_AMD_NUMA=y
+CONFIG_X86_64_ACPI_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NR_CPUS=256
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_P4_CLOCKMOD=m
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_MICROCODE=m
+CONFIG_SWIOTLB=y
+CONFIG_CALGARY_IOMMU=y
+CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_EDD=m
+# CONFIG_EDD_OFF is not set
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_DMAR=y
+CONFIG_DMAR_BROKEN_GFX_WA=y
+CONFIG_DMAR_FLOPPY_WA=y
+CONFIG_DMAR_DEFAULT_ON=y
+
+CONFIG_KEXEC_JUMP=y
+
+CONFIG_EFI=y
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_FB_EFI=y
+
+CONFIG_SCSI_ADVANSYS=m
+
+CONFIG_SECCOMP=y
+
+CONFIG_CAPI_EICON=y
+
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_SCHED_SMT=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_PCC_CPUFREQ=m 
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_HOTPLUG_MEMORY=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_PROC_EVENT is not set
+CONFIG_ACPI_POWER_METER=m
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_GHES=m
+# CONFIG_ACPI_APEI_EINJ is not set
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ASUS_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_MSI_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_EEEPC_WMI=m
+CONFIG_DELL_LAPTOP=m
+CONFIG_ACPI_WMI=m
+CONFIG_ACER_WMI=m
+CONFIG_ACERHDF=m
+CONFIG_HP_WMI=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+# CONFIG_XO15_EBOOK is not set
+CONFIG_INTEL_OAKTRAIL=m
+
+# CONFIG_INTEL_SCU_IPC is not set
+
+# CONFIG_TOUCHSCREEN_INTEL_MID is not set
+
+CONFIG_THINKPAD_ACPI=m
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# SHPC has half-arsed PCI probing, which makes it load on too many systems
+CONFIG_HOTPLUG_PCI_SHPC=m
+
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
+CONFIG_PM=y
+
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
+
+CONFIG_BLK_DEV_AMD74XX=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+
+CONFIG_CRYPTO_AES_X86_64=y
+CONFIG_CRYPTO_AES_NI_INTEL=y
+
+CONFIG_CRYPTO_TWOFISH_X86_64=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_PIIX4=m
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+
+CONFIG_NVRAM=y
+
+CONFIG_EDAC=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_AMD76X=m
+CONFIG_EDAC_E7XXX=m
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I5000=m
+CONFIG_EDAC_I5100=m
+CONFIG_EDAC_I5400=m
+CONFIG_EDAC_I82875P=m
+CONFIG_EDAC_I82860=m
+CONFIG_EDAC_I82975X=m
+CONFIG_EDAC_R82600=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_EDAC_AMD64=m
+# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
+CONFIG_EDAC_DECODE_MCE=m
+CONFIG_EDAC_I7CORE=m
+CONFIG_EDAC_I3000=m
+CONFIG_EDAC_I7300=m
+CONFIG_EDAC_X38=m
+
+CONFIG_SCHED_MC=y
+
+CONFIG_TCG_INFINEON=m
+
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+
+# CONFIG_HW_RANDOM_GEODE is not set
+
+
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_NMI_TIMEOUT=5
+
+CONFIG_GPIO_SCH=m
+# CONFIG_PC8736x_GPIO is not set
+
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+
+CONFIG_CC_STACKPROTECTOR=y
+
+CONFIG_SGI_IOC4=m
+CONFIG_SGI_XP=m
+CONFIG_SGI_GRU=m
+# CONFIG_SGI_GRU_DEBUG is not set
+
+# CONFIG_SMSC37B787_WDT is not set
+CONFIG_W83697HF_WDT=m
+
+# CONFIG_VIDEO_CAFE_CCIC is not set
+
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+
+CONFIG_RELOCATABLE=y
+CONFIG_MACINTOSH_DRIVERS=y
+
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_PROC_VMCORE=y
+CONFIG_CRASH=m
+
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+
+
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_PARAVIRT=y
+# CONFIG_PARAVIRT_DEBUG is not set
+# PARAVIRT_SPINLOCKS has a 5% perf hit
+# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_KVM_CLOCK=y
+CONFIG_KVM_GUEST=y
+CONFIG_KVM_MMU_AUDIT=y
+
+CONFIG_XEN=y
+# CONFIG_XEN_DEBUG is not set
+CONFIG_XEN_MAX_DOMAIN_MEMORY=32
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_SAVE_RESTORE=y
+CONFIG_HVC_XEN=y
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_KBDDEV_FRONTEND=y
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_XEN_WDT=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_DEBUG_FS=y
+CONFIG_XEN_PLATFORM_PCI=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
+
+CONFIG_DMADEVICES=y
+CONFIG_INTEL_IOATDMA=m
+
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ACPI_POWER=m
+
+# CONFIG_COMPAT_VDSO is not set
+CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_CPA_DEBUG is not set
+
+CONFIG_HP_WATCHDOG=m
+CONFIG_NV_TCO=m
+CONFIG_SP5100_TCO=m
+
+CONFIG_FRAME_WARN=2048
+
+CONFIG_NODES_SHIFT=9
+CONFIG_X86_PAT=y
+# FIXME: These should be 32bit only
+# CONFIG_FB_N411 is not set
+CONFIG_STRICT_DEVMEM=y
+
+CONFIG_DIRECT_GBPAGES=y
+
+# CONFIG_NO_BOOTMEM is not set
+
+# CONFIG_MEMTEST is not set
+CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_STATS=y
+# CONFIG_MAXSMP is not set
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_SYSPROF_TRACER=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_MMIOTRACE_TEST is not set
+
+CONFIG_X86_MPPARSE=y
+
+CONFIG_BACKLIGHT_APPLE=m
+
+CONFIG_OPROFILE_IBS=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW_64K=y
+
+# CONFIG_CMDLINE_BOOL is not set
+
+CONFIG_PANASONIC_LAPTOP=m
+
+CONFIG_X86_PTRACE_BTS=y
+
+CONFIG_I7300_IDLE=m
+CONFIG_INTR_REMAP=y
+
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+
+CONFIG_POWER_TRACER=y
+CONFIG_HW_BRANCH_TRACER=y
+
+CONFIG_X86_X2APIC=y
+CONFIG_SPARSE_IRQ=y
+
+CONFIG_RCU_FANOUT=64
+
+# CONFIG_IOMMU_STRESS is not set
+
+CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+
+# CONFIG_X86_MCE_INJECT is not set
+
+CONFIG_SFI=y
+CONFIG_INPUT_WINBOND_CIR=m
+CONFIG_I2C_SCMI=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EDAC_I3200=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_INTEL_TXT=y
+CONFIG_GPIO_LANGWELL=y
+
+CONFIG_FUNCTION_GRAPH_TRACER=y
+
+CONFIG_ACPI_CMPC=m
+CONFIG_MSI_WMI=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+# CONFIG_SAMSUNG_LAPTOP is not set
+
+CONFIG_CS5535_MFGPT=m
+CONFIG_GEODE_WDT=m
+CONFIG_CS5535_CLOCK_EVENT_SRC=m
+
+CONFIG_X86_DECODER_SELFTEST=y
+
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_LPC_SCH=m
+
+CONFIG_I7300_IDLE=m
+
+CONFIG_PCI_CNB20LE_QUIRK=y
+
+CONFIG_ACPI_EC_DEBUGFS=m
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_INTEL_IDLE=y
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+CONFIG_SENSORS_PKGTEMP=m
+CONFIG_F71808E_WDT=m
+CONFIG_HPWDT_NMI_DECODING=y
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_INTEL_MID_DMAC is not set
+CONFIG_PCH_DMA=m
+# CONFIG_ACPI_QUICKSTART is not set
+CONFIG_IDEAPAD_ACPI=m
+CONFIG_INTEL_IPS=m
+CONFIG_IDEAPAD_LAPTOP=m
+# CONFIG_IBM_RTL is not set
+
+CONFIG_EDAC_MCE_INJ=m
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_X86_RESERVE_LOW=64
+
+CONFIG_PCH_GBE=m
+CONFIG_PCH_PHUB=m
+
+CONFIG_VIDEO_VIA_CAMERA=m
+
+CONFIG_JUMP_LABEL=y
+
+CONFIG_HP_ILO=m
+
+CONFIG_TRANSPARENT_HUGEPAGE=y
+
+CONFIG_HP_ACCEL=m
+
+# CONFIG_RAPIDIO is not set
+
+CONFIG_BPF_JIT=y

cpupower.config

@@ -1,3 +0,0 @@
-# See 'cpupower help' and cpupower(1) for more info
-CPUPOWER_START_OPTS="frequency-set -g performance"
-CPUPOWER_STOP_OPTS="frequency-set -g ondemand"

cpupower.service

@@ -1,13 +0,0 @@
-[Unit]
-Description=Configure CPU power related settings
-After=syslog.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=/etc/sysconfig/cpupower
-ExecStart=/usr/bin/cpupower $CPUPOWER_START_OPTS
-ExecStop=/usr/bin/cpupower $CPUPOWER_STOP_OPTS
-
-[Install]
-WantedBy=multi-user.target

crypto-aesni_intel-merge-with-fpu_ko.patch

@@ -0,0 +1,134 @@
+From: Andy Lutomirski <luto@mit.edu>
+Date: Mon, 16 May 2011 05:12:47 +0000 (+1000)
+Subject: crypto: aesni-intel - Merge with fpu.ko
+X-Git-Tag: v3.0-rc1~371^2~5
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=b23b64516500df6b70fcafb820970f18538252cf
+
+crypto: aesni-intel - Merge with fpu.ko
+
+Loading fpu without aesni-intel does nothing.  Loading aesni-intel
+without fpu causes modes like xts to fail.  (Unloading
+aesni-intel will restore those modes.)
+
+One solution would be to make aesni-intel depend on fpu, but it
+seems cleaner to just combine the modules.
+
+This is probably responsible for bugs like:
+https://bugzilla.redhat.com/show_bug.cgi?id=589390
+
+Signed-off-by: Andy Lutomirski <luto@mit.edu>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+[also 9bed4aca for the bugfix. --kyle]
+
+---
+diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
+index 1a58ad8..c04f1b7 100644
+--- a/arch/x86/crypto/Makefile
++++ b/arch/x86/crypto/Makefile
+@@ -2,8 +2,6 @@
+ # Arch-specific CryptoAPI modules.
+ #
+ 
+-obj-$(CONFIG_CRYPTO_FPU) += fpu.o
+-
+ obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
+ obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
+ obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o
+@@ -24,6 +22,6 @@ aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o
+ twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
+ salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o
+ 
+-aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o
++aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o fpu.o
+ 
+ ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
+diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
+index b375b2a..ede3fa7 100644
+--- a/arch/x86/crypto/aesni-intel_glue.c
++++ b/arch/x86/crypto/aesni-intel_glue.c
+@@ -94,6 +94,10 @@ asmlinkage void aesni_cbc_enc(struct crypto_aes_ctx *ctx, u8 *out,
+ 			      const u8 *in, unsigned int len, u8 *iv);
+ asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
+ 			      const u8 *in, unsigned int len, u8 *iv);
++
++int crypto_fpu_init(void);
++void crypto_fpu_exit(void);
++
+ #ifdef CONFIG_X86_64
+ asmlinkage void aesni_ctr_enc(struct crypto_aes_ctx *ctx, u8 *out,
+ 			      const u8 *in, unsigned int len, u8 *iv);
+@@ -1259,6 +1263,8 @@ static int __init aesni_init(void)
+ 		return -ENODEV;
+ 	}
+ 
++	if ((err = crypto_fpu_init()))
++		goto fpu_err;
+ 	if ((err = crypto_register_alg(&aesni_alg)))
+ 		goto aes_err;
+ 	if ((err = crypto_register_alg(&__aesni_alg)))
+@@ -1336,6 +1342,7 @@ blk_ecb_err:
+ __aes_err:
+ 	crypto_unregister_alg(&aesni_alg);
+ aes_err:
++fpu_err:
+ 	return err;
+ }
+ 
+@@ -1365,6 +1372,8 @@ static void __exit aesni_exit(void)
+ 	crypto_unregister_alg(&blk_ecb_alg);
+ 	crypto_unregister_alg(&__aesni_alg);
+ 	crypto_unregister_alg(&aesni_alg);
++
++	crypto_fpu_exit();
+ }
+ 
+ module_init(aesni_init);
+diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c
+index 1a8f864..98d7a18 100644
+--- a/arch/x86/crypto/fpu.c
++++ b/arch/x86/crypto/fpu.c
+@@ -150,18 +150,12 @@ static struct crypto_template crypto_fpu_tmpl = {
+ 	.module = THIS_MODULE,
+ };
+ 
+-static int __init crypto_fpu_module_init(void)
++int __init crypto_fpu_init(void)
+ {
+ 	return crypto_register_template(&crypto_fpu_tmpl);
+ }
+ 
+-static void __exit crypto_fpu_module_exit(void)
++void __exit crypto_fpu_exit(void)
+ {
+ 	crypto_unregister_template(&crypto_fpu_tmpl);
+ }
+-
+-module_init(crypto_fpu_module_init);
+-module_exit(crypto_fpu_module_exit);
+-
+-MODULE_LICENSE("GPL");
+-MODULE_DESCRIPTION("FPU block cipher wrapper");
+diff --git a/crypto/Kconfig b/crypto/Kconfig
+index 4b7cb0e..87b22ca 100644
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -264,11 +264,6 @@ config CRYPTO_XTS
+ 	  key size 256, 384 or 512 bits. This implementation currently
+ 	  can't handle a sectorsize which is not a multiple of 16 bytes.
+ 
+-config CRYPTO_FPU
+-	tristate
+-	select CRYPTO_BLKCIPHER
+-	select CRYPTO_MANAGER
+-
+ comment "Hash modes"
+ 
+ config CRYPTO_HMAC
+@@ -543,7 +538,6 @@ config CRYPTO_AES_NI_INTEL
+ 	select CRYPTO_AES_586 if !64BIT
+ 	select CRYPTO_CRYPTD
+ 	select CRYPTO_ALGAPI
+-	select CRYPTO_FPU
+ 	help
+ 	  Use Intel AES-NI instructions for AES algorithm.
+ 

die-floppy-die.patch

@@ -0,0 +1,30 @@
+From 4ff58b642f80dedb20533978123d89b5ac9b1ed5 Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@phobos.i.jkkm.org>
+Date: Tue, 30 Mar 2010 00:04:29 -0400
+Subject: die-floppy-die
+
+Kill the floppy.ko pnp modalias. We were surviving just fine without
+autoloading floppy drivers, tyvm.
+
+Please feel free to register all complaints in the wastepaper bin.
+---
+ drivers/block/floppy.c |    3 +--
+ 1 files changed, 1 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
+index 90c4038..f4a0b90 100644
+--- a/drivers/block/floppy.c
++++ b/drivers/block/floppy.c
+@@ -4619,8 +4619,7 @@ static const struct pnp_device_id floppy_pnpids[] = {
+ 	{"PNP0700", 0},
+ 	{}
+ };
+-
+-MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
++/* MODULE_DEVICE_TABLE(pnp, floppy_pnpids); */
+ 
+ #else
+ 
+-- 
+1.7.0.1
+

disable-i8042-check-on-apple-mac.patch

@@ -0,0 +1,59 @@
+From 2a79554c864ac58fa2ad982f0fcee2cc2aa33eb5 Mon Sep 17 00:00:00 2001
+From: Bastien Nocera <hadess@hadess.net>
+Date: Thu, 20 May 2010 10:30:31 -0400
+Subject: Disable i8042 checks on Intel Apple Macs
+
+As those computers never had any i8042 controllers, and the
+current lookup code could potentially lock up/hang/wait for
+timeout for long periods of time.
+
+Fixes intermittent hangs on boot on a MacbookAir1,1
+
+Signed-off-by: Bastien Nocera <hadess@hadess.net>
+---
+ drivers/input/serio/i8042.c |   22 ++++++++++++++++++++++
+ 1 files changed, 22 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
+index 6440a8f..4d7cf98 100644
+--- a/drivers/input/serio/i8042.c
++++ b/drivers/input/serio/i8042.c
+@@ -1451,6 +1451,22 @@ static struct platform_driver i8042_driver = {
+ 	.shutdown	= i8042_shutdown,
+ };
+ 
++#ifdef CONFIG_DMI
++static struct dmi_system_id __initdata dmi_system_table[] = {
++	{
++		.matches = {
++			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Computer, Inc.")
++		},
++	},
++	{
++		.matches = {
++			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Inc.")
++		},
++	},
++	{}
++};
++#endif /*CONFIG_DMI*/
++
+ static int __init i8042_init(void)
+ {
+ 	struct platform_device *pdev;
+@@ -1458,6 +1474,12 @@ static int __init i8042_init(void)
+ 
+ 	dbg_init();
+ 
++#ifdef CONFIG_DMI
++	/* Intel Apple Macs never have an i8042 controller */
++	if (dmi_check_system(dmi_system_table) > 0)
++		return -ENODEV;
++#endif /*CONFIG_DMI*/
++
+ 	err = i8042_platform_init();
+ 	if (err)
+ 		return err;
+-- 
+1.7.0.1
+

dmar-disable-when-ricoh-multifunction.patch

@@ -0,0 +1,33 @@
+From da7662784dcced04a5b7a3a5b2bbb8276d699522 Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@mcmartin.ca>
+Date: Sun, 17 Oct 2010 15:55:32 -0400
+Subject: [PATCH] dmar: disable if ricoh multifunction detected
+
+---
+ drivers/pci/intel-iommu.c |   10 ++++++++++
+ 1 files changed, 10 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
+index 4789f8e..5923914 100644
+--- a/drivers/pci/intel-iommu.c
++++ b/drivers/pci/intel-iommu.c
+@@ -3784,6 +3784,16 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_g
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);
+ 
++/* https://bugzilla.redhat.com/show_bug.cgi?id=605888 */
++static void __devinit quirk_ricoh_multifunction(struct pci_dev *dev)
++{
++	dmar_disabled = 1;
++}
++DECLARE_PCI_FIXUP_HEADER(0x1180, 0xe822, quirk_ricoh_multifunction);
++DECLARE_PCI_FIXUP_HEADER(0x1180, 0xe230, quirk_ricoh_multifunction);
++DECLARE_PCI_FIXUP_HEADER(0x1180, 0xe832, quirk_ricoh_multifunction);
++DECLARE_PCI_FIXUP_HEADER(0x1180, 0xe476, quirk_ricoh_multifunction);
++
+ /* On Tylersburg chipsets, some BIOSes have been known to enable the
+    ISOCH DMAR unit for the Azalia sound device, but not give it any
+    TLB entries, which causes it to deadlock. Check for that.  We do
+-- 
+1.7.3.1
+

drm-intel-big-hammer.patch

@@ -0,0 +1,21 @@
+omgwtfbbqchainsaw?
+---
+ drivers/gpu/drm/i915/i915_gem_execbuffer.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+index e698343..21e601d1 100644
+--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
++++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+@@ -1090,6 +1090,11 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
+ 	if (ret)
+ 		goto pre_mutex_err;
+ 
++	/* We don't get the flushing right for these chipsets, use the
++	 * big hammer for now to avoid random crashiness. */
++	if (IS_I85X(dev) || IS_I865G(dev))
++		wbinvd();
++
+ 	if (dev_priv->mm.suspended) {
+ 		mutex_unlock(&dev->struct_mutex);
+ 		ret = -EBUSY;

drm-intel-edp-fixes.patch

@@ -0,0 +1,36 @@
+diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
+index f737960..b1f8164 100644
+--- a/drivers/gpu/drm/i915/i915_drv.c
++++ b/drivers/gpu/drm/i915/i915_drv.c
+@@ -509,6 +509,8 @@ i915_pci_remove(struct pci_dev *pdev)
+ {
+ 	struct drm_device *dev = pci_get_drvdata(pdev);
+ 
++	pci_disable_device(pdev); /* core did previous enable */
++
+ 	drm_put_dev(dev);
+ }
+ 
+diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
+index 300f64b..2e3db37 100644
+--- a/drivers/gpu/drm/i915/intel_dp.c
++++ b/drivers/gpu/drm/i915/intel_dp.c
+@@ -795,7 +795,8 @@ static bool ironlake_edp_panel_on (struct intel_dp *intel_dp)
+ {
+ 	struct drm_device *dev = intel_dp->base.base.dev;
+ 	struct drm_i915_private *dev_priv = dev->dev_private;
+-	u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE;
++	u32 pp, idle_on = PP_ON | PP_SEQUENCE_STATE_ON_IDLE;
++	u32 idle_on_mask = PP_ON | PP_SEQUENCE_STATE_MASK;
+ 
+ 	if (I915_READ(PCH_PP_STATUS) & PP_ON)
+ 		return true;
+@@ -851,7 +851,7 @@ static bool ironlake_edp_panel_on (struc
+ 	I915_WRITE(PCH_PP_CONTROL, pp);
+ 	POSTING_READ(PCH_PP_CONTROL);
+ 
+-	if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask,
++	if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on,
+ 		     5000))
+ 		DRM_ERROR("panel on wait timed out: 0x%08x\n",
+ 			  I915_READ(PCH_PP_STATUS));

drm-intel-make-lvds-work.patch

@@ -0,0 +1,23 @@
+ drivers/gpu/drm/i915/intel_display.c |    2 --
+ 1 files changed, 0 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
+index 990f065..171a797 100644
+--- a/drivers/gpu/drm/i915/intel_display.c
++++ b/drivers/gpu/drm/i915/intel_display.c
+@@ -4568,7 +4568,6 @@ void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
+ 				    struct drm_connector *connector, int dpms_mode)
+ {
+ 	struct drm_encoder *encoder = &intel_encoder->base;
+-	struct drm_device *dev = encoder->dev;
+ 	struct drm_crtc *crtc = encoder->crtc;
+ 	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+ 	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+@@ -4578,7 +4577,6 @@ void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
+ 		connector->encoder = NULL;
+ 		intel_encoder->load_detect_temp = false;
+ 		crtc->enabled = drm_helper_crtc_in_use(crtc);
+-		drm_helper_disable_unused_functions(dev);
+ 	}
+ 
+ 	/* Switch crtc and encoder back off if necessary */

drm-intel-next.patch

@@ -0,0 +1 @@
+empty

drm-nouveau-fixes.patch

@@ -0,0 +1 @@
+

drm-radeon-fix-regression-on-atom-cards-with-hardcoded-EDID-record.patch

@@ -0,0 +1,56 @@
+From linux-kernel-owner@vger.kernel.org Thu May  5 20:17:19 2011
+Date:	Thu, 05 May 2011 17:10:51 -0700
+From:	Greg KH <gregkh@suse.de>
+To:	linux-kernel@vger.kernel.org, stable@kernel.org
+Cc:	stable-review@kernel.org, torvalds@linux-foundation.org,
+	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
+	Dave Airlie <airlied@redhat.com>
+Subject: [patch 19/38] drm/radeon: fix regression on atom cards with hardcoded EDID record.
+In-Reply-To: <20110506001225.GA10547@kroah.com>
+X-Mailing-List:	linux-kernel@vger.kernel.org
+
+2.6.38-stable review patch.  If anyone has any objections, please let us know.
+
+------------------
+
+From: Dave Airlie <airlied@redhat.com>
+
+commit eaa4f5e1d0b816291a59a47917e569c0384f2b6f upstream.
+
+Since fafcf94e2b5732d1e13b440291c53115d2b172e9 introduced an edid size, it seems to have broken this path.
+
+This manifest as oops on T500 Lenovo laptops with dual graphics primarily.
+
+Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33812
+
+Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
+Signed-off-by: Dave Airlie <airlied@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
+
+---
+ drivers/gpu/drm/radeon/radeon_atombios.c |    5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/gpu/drm/radeon/radeon_atombios.c
++++ b/drivers/gpu/drm/radeon/radeon_atombios.c
+@@ -1599,9 +1599,10 @@ struct radeon_encoder_atom_dig *radeon_a
+ 							memcpy((u8 *)edid, (u8 *)&fake_edid_record->ucFakeEDIDString[0],
+ 							       fake_edid_record->ucFakeEDIDLength);
+ 
+-							if (drm_edid_is_valid(edid))
++							if (drm_edid_is_valid(edid)) {
+ 								rdev->mode_info.bios_hardcoded_edid = edid;
+-							else
++								rdev->mode_info.bios_hardcoded_edid_size = edid_size;
++							} else
+ 								kfree(edid);
+ 						}
+ 					}
+
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html
+Please read the FAQ at  http://www.tux.org/lkml/
+

filter-aarch64.sh.fedora

@@ -1,18 +0,0 @@
-#! /bin/bash
-
-# This is the aarch64 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia power ssb soundwire staging tty uio uwb w1"
-
-ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
-
-drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel pl111 radeon rockchip tegra sun4i sun4i-drm-hdmi tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-aarch64.sh.rhel

@@ -1,18 +0,0 @@
-#! /bin/bash
-
-# This is the aarch64 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
-
-ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
-
-drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel radeon rockchip tegra sun4i tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-armv7hl.sh.fedora

@@ -1,18 +0,0 @@
-#! /bin/bash
-
-# This is the armv7hl override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn media memstick message nfc ntb pcmcia ssb soundwire staging tty uio uwb w1"
-
-ethdrvs="3com adaptec alteon altera amd atheros broadcom cadence chelsio cisco dec dlink emulex icplus mellanox micrel myricom natsemi neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis sun tehuti via wiznet xircom"
-
-drmdrvs="amd arm armada bridge ast exynos etnaviv hisilicon i2c imx meson mgag200 msm nouveau omapdrm panel pl111 radeon rockchip sti stm sun4i sun4i-drm-hdmi tegra tilcdc tinydrm vc4"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls bq27xxx_battery_hdq mlx5_vdpa"

filter-i686.sh.fedora

@@ -1,14 +0,0 @@
-#! /bin/bash
-
-# This is the i686 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation hid-sensor-temperature hid-sensor-humidity target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus"

filter-modules.sh.fedora

@@ -1,170 +0,0 @@
-#! /bin/bash
-#
-# Called as filter-modules.sh list-of-modules Arch
-
-# This script filters the modules into the kernel-core and kernel-modules
-# subpackages.  We list out subsystems/subdirs to prune from the installed
-# module directory.  What is left is put into the kernel-core package.  What is
-# pruned is contained in the kernel-modules package.
-#
-# This file contains the default subsys/subdirs to prune from all architectures.
-# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
-# that contains the set of override lists to be used instead.  If a module or
-# subsys should be in kernel-modules on all arches, please change the defaults
-# listed here.
-
-# Overrides is individual modules which need to remain in kernel-core due to deps.
-overrides="cec"
-
-# Set the default dirs/modules to filter out
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
-
-chardrvs="mwave pcmcia"
-
-netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
-
-ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
-
-inputdrvs="gameport tablet touchscreen"
-
-scsidrvs="aacraid advansys aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf wd719x"
-
-usbdrvs="atm image misc serial wusbcore"
-
-fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs jffs2 minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
-
-netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
-
-drmdrvs="amd ast bridge gma500 i2c i915 mgag200 nouveau panel radeon"
-
-iiodrvs="accel adc afe common dac gyro health humidity light magnetometer multiplexer orientation potentiometer potentiostat pressure temperature"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus iTCO_wdt rnbd-client rnbd-server mlx5_vdpa"
-
-# Grab the arch-specific filter list overrides
-source ./filter-$2.sh
-
-filter_dir() {
-	filelist=$1
-	dir=$2
-
-	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${dir}.  Skipping."
-	else
-		grep -e "${dir}/" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-filter_ko() {
-	filelist=$1
-	mod=$2
-
-	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${mod}.ko  Skipping."
-	else
-		grep -e "${mod}.ko" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-# Filter the drivers/ subsystems
-for subsys in ${driverdirs}
-do
-	filter_dir $1 drivers/${subsys}
-done
-
-# Filter the networking drivers
-for netdrv in ${netdrvs}
-do
-	filter_dir $1 drivers/net/${netdrv}
-done
-
-# Filter the char drivers
-for char in ${chardrvs}
-do
-	filter_dir $1 drivers/char/${input}
-done
-
-# Filter the ethernet drivers
-for eth in ${ethdrvs}
-do
-	filter_dir $1 drivers/net/ethernet/${eth}
-done
-
-# SCSI
-for scsi in ${scsidrvs}
-do
-	filter_dir $1 drivers/scsi/${scsi}
-done
-
-# Input
-for input in ${inputdrvs}
-do
-	filter_dir $1 drivers/input/${input}
-done
-
-# USB
-for usb in ${usbdrvs}
-do
-	filter_dir $1 drivers/usb/${usb}
-done
-
-# Filesystems
-for fs in ${fsdrvs}
-do
-	filter_dir $1 fs/${fs}
-done
-
-# Network protocols
-for prot in ${netprots}
-do
-	filter_dir $1 kernel/net/${prot}
-done
-
-# DRM
-for drm in ${drmdrvs}
-do
-	filter_dir $1 drivers/gpu/drm/${drm}
-done
-
-# Just kill sound.
-filter_dir $1 kernel/sound
-
-# Now go through and filter any single .ko files that might have deps on the
-# things we filtered above
-for mod in ${singlemods}
-do
-        filter_ko $1 ${mod}
-done
-
-# Now process the override list to bring those modules back into core
-for mod in ${overrides}
-do
-	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
-	if [ $? -ne 0 ]
-        then
-                echo "Couldn't save ${mod}.ko  Skipping."
-        else
-                grep -e "/${mod}.ko" k-d.list >> $filelist
-                mv k-d.list.tmp k-d.list
-        fi
-
-done
-
-# Go through our generated drivers list and remove the .ko files.  We'll
-# restore them later.
-for mod in `cat k-d.list`
-do
-	rm -rf $mod
-done

filter-modules.sh.rhel

@@ -1,168 +0,0 @@
-#! /bin/bash
-#
-# Called as filter-modules.sh list-of-modules Arch
-
-# This script filters the modules into the kernel-core and kernel-modules
-# subpackages.  We list out subsystems/subdirs to prune from the installed
-# module directory.  What is left is put into the kernel-core package.  What is
-# pruned is contained in the kernel-modules package.
-#
-# This file contains the default subsys/subdirs to prune from all architectures.
-# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
-# that contains the set of override lists to be used instead.  If a module or
-# subsys should be in kernel-modules on all arches, please change the defaults
-# listed here.
-
-# Overrides is individual modules which need to remain in kernel-core due to deps.
-overrides="cec"
-
-# Set the default dirs/modules to filter out
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
-
-chardrvs="mwave pcmcia"
-
-netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
-
-ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
-
-inputdrvs="gameport tablet touchscreen"
-
-scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic hisi_sas isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf"
-
-usbdrvs="atm image misc serial wusbcore"
-
-fsdrvs="affs befs coda cramfs ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
-
-netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
-
-drmdrvs="amd ast gma500 i2c i915 mgag200 nouveau radeon via "
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial ism hid-asus"
-
-# Grab the arch-specific filter list overrides
-source ./filter-$2.sh
-
-filter_dir() {
-	filelist=$1
-	dir=$2
-
-	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${dir}.  Skipping."
-	else
-		grep -e "${dir}/" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-filter_ko() {
-	filelist=$1
-	mod=$2
-
-	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
-
-	if [ $? -ne 0 ]
-	then
-		echo "Couldn't remove ${mod}.ko  Skipping."
-	else
-		grep -e "${mod}.ko" ${filelist} >> k-d.list
-		mv ${filelist}.tmp $filelist
-	fi
-	
-	return 0
-}
-
-# Filter the drivers/ subsystems
-for subsys in ${driverdirs}
-do
-	filter_dir $1 drivers/${subsys}
-done
-
-# Filter the networking drivers
-for netdrv in ${netdrvs}
-do
-	filter_dir $1 drivers/net/${netdrv}
-done
-
-# Filter the char drivers
-for char in ${chardrvs}
-do
-	filter_dir $1 drivers/char/${input}
-done
-
-# Filter the ethernet drivers
-for eth in ${ethdrvs}
-do
-	filter_dir $1 drivers/net/ethernet/${eth}
-done
-
-# SCSI
-for scsi in ${scsidrvs}
-do
-	filter_dir $1 drivers/scsi/${scsi}
-done
-
-# Input
-for input in ${inputdrvs}
-do
-	filter_dir $1 drivers/input/${input}
-done
-
-# USB
-for usb in ${usbdrvs}
-do
-	filter_dir $1 drivers/usb/${usb}
-done
-
-# Filesystems
-for fs in ${fsdrvs}
-do
-	filter_dir $1 fs/${fs}
-done
-
-# Network protocols
-for prot in ${netprots}
-do
-	filter_dir $1 kernel/net/${prot}
-done
-
-# DRM
-for drm in ${drmdrvs}
-do
-	filter_dir $1 drivers/gpu/drm/${drm}
-done
-
-# Just kill sound.
-filter_dir $1 kernel/sound
-
-# Now go through and filter any single .ko files that might have deps on the
-# things we filtered above
-for mod in ${singlemods}
-do
-        filter_ko $1 ${mod}
-done
-
-# Now process the override list to bring those modules back into core
-for mod in ${overrides}
-do
-	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
-	if [ $? -ne 0 ]
-        then
-                echo "Couldn't save ${mod}.ko  Skipping."
-        else
-                grep -e "/${mod}.ko" k-d.list >> $filelist
-                mv k-d.list.tmp k-d.list
-        fi
-
-done
-
-# Go through our generated drivers list and remove the .ko files.  We'll
-# restore them later.
-for mod in `cat k-d.list`
-do
-	rm -rf $mod
-done

filter-ppc64le.sh.fedora

@@ -1,14 +0,0 @@
-#! /bin/bash
-
-# This is the ppc64le override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-ppc64le.sh.rhel

@@ -1,14 +0,0 @@
-#! /bin/bash
-
-# This is the ppc64le override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-s390x.sh.fedora

@@ -1,12 +0,0 @@
-#! /bin/bash
-
-# This is the s390x override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-# Defaults work so no need to override

filter-s390x.sh.rhel

@@ -1,12 +0,0 @@
-#! /bin/bash
-
-# This is the s390x override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-# Defaults work so no need to override

filter-x86_64.sh.fedora

@@ -1,12 +0,0 @@
-#! /bin/bash
-
-# This is the x86_64 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-# Defaults work so no need to override

filter-x86_64.sh.rhel

@@ -1,12 +0,0 @@
-#! /bin/bash
-
-# This is the x86_64 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-# Defaults work so no need to override

find-provides

@@ -0,0 +1,44 @@
+#!/usr/bin/python
+#
+# find-provides: munge the provides dependencies from the kabideps file
+#
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPL).
+#
+# Takes a directory prefix, then outputs the kabideps file contents.
+
+__author__ = "Jon Masters <jcm@redhat.com>"
+__version__ = "1.0"
+__date__ = "Tue 25 Jul 2006 04:00 GMT"
+__copyright__ = "Copyright (C) 2006 Red Hat, Inc"
+__license__ = "GPL"
+
+import os
+import re
+import string
+import sys
+
+false = 0
+true = 1
+
+kabideps=""
+
+p = re.compile('^(.*)/symvers-(.*).gz$')
+while true:
+	foo = sys.stdin.readline()
+	if foo == "":
+		break
+	string.split(foo)
+	m = p.match(foo)
+	if m:
+		kabideps=sys.argv[1] + "/kernel-" + m.group(2) + "-kabideps"
+	
+if kabideps == "":
+	sys.exit(0)
+
+if not (os.path.isfile(kabideps)):
+	sys.stderr.write(sys.argv[0] + ": cannot locate kabideps file: " + kabideps + "\n")
+	sys.exit(1)
+
+sys.stderr.write(sys.argv[0] + ": processing kABI: " + kabideps)
+os.system("cat " + kabideps)

fix_xen_guest_on_old_EC2.patch

@@ -0,0 +1,34 @@
+
+Legacy hypervisors (RHEL 5.0 and RHEL 5.1) do not handle guest writes to
+cr4 gracefully. If a guest attempts to write a bit of cr4 that is
+unsupported, then the HV is so offended it crashes the domain. While
+later guest kernels (such as RHEL6) don't assume the HV supports all
+features, they do expect nicer responses. That assumption introduced
+code that probes whether or not xsave is supported early in the boot. So
+now when attempting to boot a RHEL6 guest on RHEL5.0 or RHEL5.1 an early
+crash will occur.
+
+This patch is quite obviously an undesirable hack. The real fix for this
+problem should be in the HV, and is, in later HVs. However, to support
+running on old HVs, RHEL6 can take this small change. No impact will
+occur for running on any RHEL HV (not even RHEL 5.5 supports xsave).
+There is only potential for guest performance loss on upstream Xen.
+
+---
+ arch/x86/xen/enlighten.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
+index 52f8e19..6db3d67 100644
+--- a/arch/x86/xen/enlighten.c
++++ b/arch/x86/xen/enlighten.c
+@@ -802,6 +802,7 @@ static void xen_write_cr4(unsigned long cr4)
+ {
+ 	cr4 &= ~X86_CR4_PGE;
+ 	cr4 &= ~X86_CR4_PSE;
++	cr4 &= ~X86_CR4_OSXSAVE;
+ 
+ 	native_write_cr4(cr4);
+ }
+-- 
+1.6.6.1

generate_all_configs.sh

@@ -1,40 +0,0 @@
-#!/bin/sh
-
-# Adjusts the configuration options to build the variants correctly
-#
-# arg1: configuration to go in the primary variant
-# arg2: are we only generating debug configs
-
-
-PRIMARY=$1
-DEBUGBUILDSENABLED=$2
-
-if [ -z "$2" ]; then
-	exit 1
-fi
-
-if [ -z "$PRIMARY" ]; then
-	PRIMARY=rhel
-fi
-
-if [ "$PRIMARY" = "fedora" ]; then
-	SECONDARY=rhel
-else
-	SECONDARY=fedora
-fi
-
-for i in kernel-*-"$PRIMARY".config; do
-	NEW=kernel-"$VERSION"-$(echo "$i" | cut -d - -f2- | sed s/-"$PRIMARY"//)
-	#echo $NEW
-	mv "$i" "$NEW"
-done
-
-rm -f kernel-*-"$SECONDARY".config
-
-if [ "$DEBUGBUILDSENABLED" -eq 0 ]; then
-	for i in kernel-*debug*.config; do
-		base=$(echo "$i" | sed -r s/-?debug//g)
-		NEW=kernel-$(echo "$base" | cut -d - -f2-)
-		mv "$i" "$NEW"
-	done
-fi

generate_bls_conf.sh

@@ -1,35 +0,0 @@
-#!/bin/bash
-set -e
-
-# shellcheck disable=SC1091
-. /etc/os-release
-
-kernelver=$1 && shift
-rootfs=$1 && shift
-variant=$1 && shift
-
-output="${rootfs}/lib/modules/${kernelver}/bls.conf"
-date=$(date -u +%Y%m%d%H%M%S)
-
-if [ "${variant:-5}" = "debug" ]; then
-    debugname=" with debugging"
-    debugid="-debug"
-else
-    debugname=""
-    debugid=""
-fi
-
-# shellcheck will complain about bootprefix being referenced but not assigned,
-# but that is perfectly OK here.
-# shellcheck disable=SC2154
-cat > "$output" <<EOF
-title ${NAME} (${kernelver}) ${VERSION}${debugname}
-version ${kernelver}${debugid}
-linux ${bootprefix}/vmlinuz-${kernelver}
-initrd ${bootprefix}/initramfs-${kernelver}.img
-options \$kernelopts
-id ${ID}-${date}-${kernelver}${debugid}
-grub_users \$grub_users
-grub_arg --unrestricted
-grub_class kernel${variant}
-EOF

genkey

@@ -0,0 +1,7 @@
+%pubring kernel.pub
+%secring kernel.sec
+Key-Type: DSA
+Key-Length: 512
+Name-Real: Red Hat, Inc.
+Name-Comment: Kernel Module GPG key
+%commit

hda_intel-prealloc-4mb-dmabuffer.patch

@@ -0,0 +1,47 @@
+From c69fcbd1f60b0842f7c1ad2c95692ffd19c4932b Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@phobos.i.jkkm.org>
+Date: Mon, 29 Mar 2010 23:56:08 -0400
+Subject: hda_intel-prealloc-4mb-dmabuffer
+
+---
+ sound/pci/hda/hda_intel.c |   14 +++++++++++++-
+ 1 files changed, 13 insertions(+), 1 deletions(-)
+
+diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
+index 4bb9067..37db515 100644
+--- a/sound/pci/hda/hda_intel.c
++++ b/sound/pci/hda/hda_intel.c
+@@ -1986,6 +1986,7 @@ azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
+ 	struct azx_pcm *apcm;
+ 	int pcm_dev = cpcm->device;
+ 	int s, err;
++	size_t prealloc_min = 64*1024;	/* 64KB */
+ 
+ 	if (pcm_dev >= HDA_MAX_PCMS) {
+ 		snd_printk(KERN_ERR SFX "Invalid PCM device number %d\n",
+@@ -2019,10 +2020,21 @@ azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
+ 		if (cpcm->stream[s].substreams)
+ 			snd_pcm_set_ops(pcm, s, &azx_pcm_ops);
+ 	}
++
+ 	/* buffer pre-allocation */
++
++	/* subtle, don't allocate a big buffer for modems...
++	 * also, don't just test 32BIT_MASK, since azx supports
++	 * 64-bit DMA in some cases.
++	 */
++	/* lennart wants a 2.2MB buffer for 2sec of 48khz */
++	if (pcm->dev_class == SNDRV_PCM_CLASS_GENERIC &&
++	    chip->pci->dma_mask >= DMA_32BIT_MASK)
++		prealloc_min = 4 * 1024 * 1024;	/* 4MB */
++
+ 	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
+ 					      snd_dma_pci_data(chip->pci),
+-					      1024 * 64, 32 * 1024 * 1024);
++					      prealloc_min, 32 * 1024 * 1024);
+ 	return 0;
+ }
+ 
+-- 
+1.7.0.1
+

ima-allow-it-to-be-completely-disabled-and-default-off.patch

@@ -0,0 +1,145 @@
+From 785465d9cffd65b5a69dd2f465d2f7c917713220 Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@mcmartin.ca>
+Date: Mon, 18 Oct 2010 13:30:39 -0400
+Subject: [PATCH] ima: provide a toggle to disable it entirely
+
+Signed-off-by: Kyle McMartin <kyle@redhat.com>
+---
+ security/integrity/ima/ima.h      |    1 +
+ security/integrity/ima/ima_iint.c |    9 +++++++++
+ security/integrity/ima/ima_main.c |   24 +++++++++++++++++++++---
+ 3 files changed, 31 insertions(+), 3 deletions(-)
+
+diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
+index 3fbcd1d..65c3977 100644
+--- a/security/integrity/ima/ima.h
++++ b/security/integrity/ima/ima.h
+@@ -37,6 +37,7 @@ enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 };
+ /* set during initialization */
+ extern int iint_initialized;
+ extern int ima_initialized;
++extern int ima_enabled;
+ extern int ima_used_chip;
+ extern char *ima_hash;
+ 
+diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c
+index afba4ae..3d191ef 100644
+--- a/security/integrity/ima/ima_iint.c
++++ b/security/integrity/ima/ima_iint.c
+@@ -54,6 +54,9 @@ int ima_inode_alloc(struct inode *inode)
+ 	struct ima_iint_cache *iint = NULL;
+ 	int rc = 0;
+ 
++	if (!ima_enabled)
++		return 0;
++
+ 	iint = kmem_cache_alloc(iint_cache, GFP_NOFS);
+ 	if (!iint)
+ 		return -ENOMEM;
+@@ -116,6 +119,9 @@ void ima_inode_free(struct inode *inode)
+ {
+ 	struct ima_iint_cache *iint;
+ 
++	if (!ima_enabled)
++		return;
++
+ 	spin_lock(&ima_iint_lock);
+ 	iint = radix_tree_delete(&ima_iint_store, (unsigned long)inode);
+ 	spin_unlock(&ima_iint_lock);
+@@ -139,6 +145,9 @@ static void init_once(void *foo)
+ 
+ static int __init ima_iintcache_init(void)
+ {
++	if (!ima_enabled)
++		return 0;
++
+ 	iint_cache =
+ 	    kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0,
+ 			      SLAB_PANIC, init_once);
+diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
+index e662b89..6e91905 100644
+--- a/security/integrity/ima/ima_main.c
++++ b/security/integrity/ima/ima_main.c
+@@ -26,6 +26,7 @@
+ #include "ima.h"
+ 
+ int ima_initialized;
++int ima_enabled;
+ 
+ char *ima_hash = "sha1";
+ static int __init hash_setup(char *str)
+@@ -36,6 +37,14 @@ static int __init hash_setup(char *str)
+ }
+ __setup("ima_hash=", hash_setup);
+ 
++static int __init ima_enable(char *str)
++{
++	if (strncmp(str, "on", 2) == 0)
++		ima_enabled = 1;
++	return 1;
++}
++__setup("ima=", ima_enable);
++
+ struct ima_imbalance {
+ 	struct hlist_node node;
+ 	unsigned long fsmagic;
+@@ -148,7 +157,7 @@ void ima_counts_get(struct file *file)
+ 	struct ima_iint_cache *iint;
+ 	int rc;
+ 
+-	if (!iint_initialized || !S_ISREG(inode->i_mode))
++	if (!ima_enabled || !iint_initialized || !S_ISREG(inode->i_mode))
+ 		return;
+ 	iint = ima_iint_find_get(inode);
+ 	if (!iint)
+@@ -215,7 +224,7 @@ void ima_file_free(struct file *file)
+ 	struct inode *inode = file->f_dentry->d_inode;
+ 	struct ima_iint_cache *iint;
+ 
+-	if (!iint_initialized || !S_ISREG(inode->i_mode))
++	if (!ima_enabled || !iint_initialized || !S_ISREG(inode->i_mode))
+ 		return;
+ 	iint = ima_iint_find_get(inode);
+ 	if (!iint)
+@@ -269,7 +278,7 @@ int ima_file_mmap(struct file *file, unsigned long prot)
+ {
+ 	int rc;
+ 
+-	if (!file)
++	if (!ima_enabled || !file)
+ 		return 0;
+ 	if (prot & PROT_EXEC)
+ 		rc = process_measurement(file, file->f_dentry->d_name.name,
+@@ -294,6 +303,9 @@ int ima_bprm_check(struct linux_binprm *bprm)
+ {
+ 	int rc;
+ 
++	if (!ima_enabled)
++		return 0;
++
+ 	rc = process_measurement(bprm->file, bprm->filename,
+ 				 MAY_EXEC, BPRM_CHECK);
+ 	return 0;
+@@ -313,6 +325,9 @@ int ima_file_check(struct file *file, int mask)
+ {
+ 	int rc;
+ 
++	if (!ima_enabled)
++		return 0;
++
+ 	rc = process_measurement(file, file->f_dentry->d_name.name,
+ 				 mask & (MAY_READ | MAY_WRITE | MAY_EXEC),
+ 				 FILE_CHECK);
+@@ -324,6 +339,9 @@ static int __init init_ima(void)
+ {
+ 	int error;
+ 
++	if (!ima_enabled)
++		return 0;
++
+ 	error = ima_init();
+ 	ima_initialized = 1;
+ 	return error;
+-- 
+1.7.3.1
+

libata-sas-only-set-frozen-flag-if-new-eh-is-supported.patch

@@ -0,0 +1,72 @@
+From: Nishanth Aravamudan <nacc@us.ibm.com>
+Date: Thu, 16 Jun 2011 15:28:36 +0000 (-0700)
+Subject: libata/sas: only set FROZEN flag if new EH is supported
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=3f1e046ad3370d22d39529103667354eb50abc08
+
+libata/sas: only set FROZEN flag if new EH is supported
+
+On 16.06.2011 [08:28:39 -0500], Brian King wrote:
+> On 06/16/2011 02:51 AM, Tejun Heo wrote:
+> > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote:
+> >>> That looks like the right thing to do. For ipr's usage of
+> >>> libata, we don't have the concept of a port frozen state, so this flag
+> >>> should really never get set. The alternate way to fix this would be to
+> >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler
+> >>> is not NULL.
+> >>
+> >> It seemed like ipr is as you say, but I wasn't sure if it was
+> >> appropriate to make the change above in the common libata-scis code or
+> >> not. I don't want to break some other device on accident.
+> >>
+> >> Also, I tried your suggestion, but I don't think that can happen in
+> >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like
+> >> ap->ops typically gets set only after ata_port_alloc returns?
+> >
+> > Maybe we can test error_handler in ata_sas_port_start()?
+>
+> Good point. Since libsas is converted to the new eh now, we would need to have
+> this test.
+
+Commit 7b3a24c57d2eeda8dba9c205342b12689c4679f9 ("ahci: don't enable
+port irq before handler is registered") caused a regression for CD-ROMs
+attached to the IPR SATA bus on Power machines:
+
+  ata_port_alloc: ENTER
+  ata_port_probe: ata1: bus probe begin
+  ata1.00: ata_dev_read_id: ENTER
+  ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
+  ata1.00: ata_dev_read_id: ENTER
+  ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
+  ata1.00: limiting speed to UDMA7:PIO5
+  ata1.00: ata_dev_read_id: ENTER
+  ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
+  ata1.00: disabled
+  ata_port_probe: ata1: bus probe end
+  scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
+
+The FROZEN flag added in that commit is only cleared by the new EH code,
+which is not used by ipr. Clear this flag in the SAS code if we don't
+support new EH.
+
+Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
+Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
+---
+
+diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
+index d51f979..927f968 100644
+--- a/drivers/ata/libata-scsi.c
++++ b/drivers/ata/libata-scsi.c
+@@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
+  */
+ int ata_sas_port_start(struct ata_port *ap)
+ {
++	/*
++	 * the port is marked as frozen at allocation time, but if we don't
++	 * have new eh, we won't thaw it
++	 */
++	if (!ap->ops->error_handler)
++		ap->pflags &= ~ATA_PFLAG_FROZEN;
+ 	return 0;
+ }
+ EXPORT_SYMBOL_GPL(ata_sas_port_start);

linux-2.6-32bit-mmap-exec-randomization.patch

@@ -0,0 +1,216 @@
+--- b/include/linux/sched.h
++++ b/include/linux/sched.h
+@@ -397,6 +397,10 @@
+ extern unsigned long
+ arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
+ 		       unsigned long, unsigned long);
++
++extern unsigned long
++arch_get_unmapped_exec_area(struct file *, unsigned long, unsigned long,
++		       unsigned long, unsigned long);
+ extern unsigned long
+ arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
+ 			  unsigned long len, unsigned long pgoff,
+--- b/mm/mmap.c
++++ b/mm/mmap.c
+@@ -28,6 +28,7 @@
+ #include <linux/perf_event.h>
+ #include <linux/audit.h>
+ #include <linux/khugepaged.h>
++#include <linux/random.h>
+ 
+ #include <asm/uaccess.h>
+ #include <asm/cacheflush.h>
+@@ -1000,7 +1001,8 @@
+ 	/* Obtain the address to map to. we verify (or select) it and ensure
+ 	 * that it represents a valid section of the address space.
+ 	 */
+-	addr = get_unmapped_area(file, addr, len, pgoff, flags);
++	addr = get_unmapped_area_prot(file, addr, len, pgoff, flags,
++		prot & PROT_EXEC);
+ 	if (addr & ~PAGE_MASK)
+ 		return addr;
+ 
+@@ -1552,8 +1554,8 @@
+ }
+ 
+ unsigned long
+-get_unmapped_area(struct file *file, unsigned long addr, unsigned long len,
+-		unsigned long pgoff, unsigned long flags)
++get_unmapped_area_prot(struct file *file, unsigned long addr, unsigned long len,
++		unsigned long pgoff, unsigned long flags, int exec)
+ {
+ 	unsigned long (*get_area)(struct file *, unsigned long,
+ 				  unsigned long, unsigned long, unsigned long);
+@@ -1566,7 +1568,11 @@
+ 	if (len > TASK_SIZE)
+ 		return -ENOMEM;
+ 
+-	get_area = current->mm->get_unmapped_area;
++	if (exec && current->mm->get_unmapped_exec_area)
++		get_area = current->mm->get_unmapped_exec_area;
++	else
++		get_area = current->mm->get_unmapped_area;
++
+ 	if (file && file->f_op && file->f_op->get_unmapped_area)
+ 		get_area = file->f_op->get_unmapped_area;
+ 	addr = get_area(file, addr, len, pgoff, flags);
+@@ -1580,8 +1586,83 @@
+ 
+ 	return arch_rebalance_pgtables(addr, len);
+ }
++EXPORT_SYMBOL(get_unmapped_area_prot);
++
++static bool should_randomize(void)
++{
++	return (current->flags & PF_RANDOMIZE) &&
++		!(current->personality & ADDR_NO_RANDOMIZE);
++}
++
++#define SHLIB_BASE	0x00110000
++
++unsigned long
++arch_get_unmapped_exec_area(struct file *filp, unsigned long addr0,
++		unsigned long len0, unsigned long pgoff, unsigned long flags)
++{
++	unsigned long addr = addr0, len = len0;
++	struct mm_struct *mm = current->mm;
++	struct vm_area_struct *vma;
++	unsigned long tmp;
++
++	if (len > TASK_SIZE)
++		return -ENOMEM;
++
++	if (flags & MAP_FIXED)
++		return addr;
++
++	if (!addr)
++		addr = !should_randomize() ? SHLIB_BASE :
++			randomize_range(SHLIB_BASE, 0x01000000, len);
++
++	if (addr) {
++		addr = PAGE_ALIGN(addr);
++		vma = find_vma(mm, addr);
++		if (TASK_SIZE - len >= addr &&
++		    (!vma || addr + len <= vma->vm_start))
++			return addr;
++	}
++
++	addr = SHLIB_BASE;
++	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
++		/* At this point:  (!vma || addr < vma->vm_end). */
++		if (TASK_SIZE - len < addr)
++			return -ENOMEM;
++
++		if (!vma || addr + len <= vma->vm_start) {
++			/*
++			 * Must not let a PROT_EXEC mapping get into the
++			 * brk area:
++			 */
++			if (addr + len > mm->brk)
++				goto failed;
++
++			/*
++			 * Up until the brk area we randomize addresses
++			 * as much as possible:
++			 */
++			if (addr >= 0x01000000 && should_randomize()) {
++				tmp = randomize_range(0x01000000,
++					PAGE_ALIGN(max(mm->start_brk,
++					(unsigned long)0x08000000)), len);
++				vma = find_vma(mm, tmp);
++				if (TASK_SIZE - len >= tmp &&
++				    (!vma || tmp + len <= vma->vm_start))
++					return tmp;
++			}
++			/*
++			 * Ok, randomization didnt work out - return
++			 * the result of the linear search:
++			 */
++			return addr;
++		}
++		addr = vma->vm_end;
++	}
++
++failed:
++	return current->mm->get_unmapped_area(filp, addr0, len0, pgoff, flags);
++}
+ 
+-EXPORT_SYMBOL(get_unmapped_area);
+ 
+ /* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
+ struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr)
+--- a/arch/x86/mm/mmap.c
++++ b/arch/x86/mm/mmap.c
+@@ -124,13 +124,16 @@ static unsigned long mmap_legacy_base(void)
+  */
+ void arch_pick_mmap_layout(struct mm_struct *mm)
+ {
+ 	if (mmap_is_legacy()) {
+ 		mm->mmap_base = mmap_legacy_base();
+ 		mm->get_unmapped_area = arch_get_unmapped_area;
+ 		mm->unmap_area = arch_unmap_area;
+ 	} else {
+ 		mm->mmap_base = mmap_base();
+ 		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
++		if (!(current->personality & READ_IMPLIES_EXEC)
++		    && mmap_is_ia32())
++			mm->get_unmapped_exec_area = arch_get_unmapped_exec_area;
+ 		mm->unmap_area = arch_unmap_area_topdown;
+ 	}
+ }
+--- a/arch/x86/vdso/vdso32-setup.c
++++ b/arch/x86/vdso/vdso32-setup.c
+@@ -331,7 +331,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+ 	if (compat)
+ 		addr = VDSO_HIGH_BASE;
+ 	else {
+-		addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
++		addr = get_unmapped_area_prot(NULL, 0, PAGE_SIZE, 0, 0, 1);
+ 		if (IS_ERR_VALUE(addr)) {
+ 			ret = addr;
+ 			goto up_fail;
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -1263,7 +1263,13 @@ extern int install_special_mapping(struct mm_struct *mm,
+ 				   unsigned long addr, unsigned long len,
+ 				   unsigned long flags, struct page **pages);
+ 
+-extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
++extern unsigned long get_unmapped_area_prot(struct file *, unsigned long, unsigned long, unsigned long, unsigned long, int);
++
++static inline unsigned long get_unmapped_area(struct file *file, unsigned long addr,
++		unsigned long len, unsigned long pgoff, unsigned long flags)
++{
++	return get_unmapped_area_prot(file, addr, len, pgoff, flags, 0);
++}
+ 
+ extern unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
+ 	unsigned long len, unsigned long prot,
+--- a/include/linux/mm_types.h
++++ b/include/linux/mm_types.h
+@@ -227,6 +227,9 @@ struct mm_struct {
+ 	unsigned long (*get_unmapped_area) (struct file *filp,
+ 				unsigned long addr, unsigned long len,
+ 				unsigned long pgoff, unsigned long flags);
++       unsigned long (*get_unmapped_exec_area) (struct file *filp,
++				unsigned long addr, unsigned long len,
++				unsigned long pgoff, unsigned long flags);
+ 	void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
+ #endif
+ 	unsigned long mmap_base;		/* base of mmap area */
+--- a/mm/mremap.c
++++ b/mm/mremap.c
+@@ -487,10 +487,10 @@ unsigned long do_mremap(unsigned long addr,
+ 		if (vma->vm_flags & VM_MAYSHARE)
+ 			map_flags |= MAP_SHARED;
+ 
+-		new_addr = get_unmapped_area(vma->vm_file, 0, new_len,
++		new_addr = get_unmapped_area_prot(vma->vm_file, 0, new_len,
+ 					vma->vm_pgoff +
+ 					((addr - vma->vm_start) >> PAGE_SHIFT),
+-					map_flags);
++					map_flags, vma->vm_flags & VM_EXEC);
+ 		if (new_addr & ~PAGE_MASK) {
+ 			ret = new_addr;
+ 			goto out;

linux-2.6-acpi-debug-infinite-loop.patch

@@ -0,0 +1,25 @@
+--- linux-2.6.34.noarch/drivers/acpi/acpica/acconfig.h~	2010-07-01 14:49:03.000000000 -0400
++++ linux-2.6.34.noarch/drivers/acpi/acpica/acconfig.h	2010-07-01 14:49:17.000000000 -0400
+@@ -117,7 +117,7 @@
+ 
+ /* Maximum number of While() loop iterations before forced abort */
+ 
+-#define ACPI_MAX_LOOP_ITERATIONS        0xFFFF
++#define ACPI_MAX_LOOP_ITERATIONS        0xFFFFFF
+ 
+ /* Maximum sleep allowed via Sleep() operator */
+ 
+--- a/drivers/acpi/acpica/dscontrol.c
++++ b/drivers/acpi/acpica/dscontrol.c
+@@ -212,6 +212,11 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
+ 			 * loop does not implement a timeout.
+ 			 */
+ 			control_state->control.loop_count++;
++			if ((control_state->control.loop_count > 1) &&
++			    (control_state->control.loop_count % 0xffff == 0))
++				printk("ACPI: While loop taking a really long time. loop_count=0x%x\n",
++				       control_state->control.loop_count);
++
+ 			if (control_state->control.loop_count >
+ 			    ACPI_MAX_LOOP_ITERATIONS) {
+ 				status = AE_AML_INFINITE_LOOP;

linux-2.6-acpi-video-dos.patch

@@ -0,0 +1,17 @@
+Disable firmware video brightness change on AC/Battery switch by default
+
+-- mjg59
+
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index bac2901..93b1a9e 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -1818,7 +1818,7 @@ static int acpi_video_bus_put_devices(struct acpi_video_bus *video)
+ 
+ static int acpi_video_bus_start_devices(struct acpi_video_bus *video)
+ {
+-	return acpi_video_bus_DOS(video, 0, 0);
++	return acpi_video_bus_DOS(video, 0, 1);
+ }
+ 
+ static int acpi_video_bus_stop_devices(struct acpi_video_bus *video)

linux-2.6-compile-fixes.patch

@@ -0,0 +1,6 @@
+#
+# Small compile fixes (For more involved fixes, please use a separate patch).
+#
+# Please add the errors from gcc before the diffs to save others having
+# to do a compile to figure out what your diff is fixing. Thanks.
+#

linux-2.6-crash-driver.patch

@@ -0,0 +1,379 @@
+From df42d15cd28f468ecd4c30465b98a53cce90617c Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@phobos.i.jkkm.org>
+Date: Tue, 30 Mar 2010 00:16:25 -0400
+Subject: dev-crash-driver.patch
+
+---
+ arch/ia64/include/asm/crash.h |   90 +++++++++++++++++++++++++++++
+ arch/ia64/kernel/ia64_ksyms.c |    3 +
+ arch/x86/include/asm/crash.h  |   75 ++++++++++++++++++++++++
+ arch/x86/mm/ioremap.c         |    2 +
+ drivers/char/Kconfig          |    2 +
+ drivers/char/Makefile         |    2 +
+ drivers/char/crash.c          |  128 +++++++++++++++++++++++++++++++++++++++++
+ 7 files changed, 302 insertions(+), 0 deletions(-)
+ create mode 100644 arch/ia64/include/asm/crash.h
+ create mode 100644 arch/x86/include/asm/crash.h
+ create mode 100644 drivers/char/crash.c
+
+diff --git a/arch/ia64/include/asm/crash.h b/arch/ia64/include/asm/crash.h
+new file mode 100644
+index 0000000..541af84
+--- /dev/null
++++ b/arch/ia64/include/asm/crash.h
+@@ -0,0 +1,90 @@
++#ifndef _ASM_IA64_CRASH_H
++#define _ASM_IA64_CRASH_H
++
++/*
++ * linux/include/asm-ia64/crash.h
++ *
++ * Copyright (c) 2004 Red Hat, Inc. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2, or (at your option)
++ * any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifdef __KERNEL__
++
++#include <linux/efi.h>
++#include <linux/mm.h>
++#include <asm/mmzone.h>
++
++static inline void *
++map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	u32 type;
++
++	if (REGION_NUMBER(offset) == 5) {
++		char byte;
++
++		if (__get_user(byte, (char *)offset) == 0)
++			return (void *)offset;
++		else
++			return NULL;
++	}
++
++	switch (type = efi_mem_type(offset)) 
++	{
++	case EFI_LOADER_CODE:
++	case EFI_LOADER_DATA:
++	case EFI_BOOT_SERVICES_CODE:
++	case EFI_BOOT_SERVICES_DATA:
++	case EFI_CONVENTIONAL_MEMORY:
++		break;
++
++	default:
++		printk(KERN_INFO
++		    "crash memory driver: invalid memory type for %lx: %d\n", 
++			offset, type);
++		return NULL;
++	}
++
++	pfn = offset >> PAGE_SHIFT;
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++			"crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	page = pfn_to_page(pfn);
++
++	if (!page->virtual) {
++		printk(KERN_INFO
++		    "crash memory driver: offset: %lx page: %lx page->virtual: NULL\n", 
++			offset, (unsigned long)page);
++		return NULL;
++	}
++
++	return (page->virtual + (offset & (PAGE_SIZE-1)));
++}
++
++static inline void unmap_virtual(struct page *page) 
++{ 
++	return;
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* _ASM_IA64_CRASH_H */
+diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
+index 7f4a0ed..552fe24 100644
+--- a/arch/ia64/kernel/ia64_ksyms.c
++++ b/arch/ia64/kernel/ia64_ksyms.c
+@@ -84,6 +84,9 @@ EXPORT_SYMBOL(ia64_save_scratch_fpregs);
+ #include <asm/unwind.h>
+ EXPORT_SYMBOL(unw_init_running);
+ 
++#include <linux/efi.h>
++EXPORT_SYMBOL_GPL(efi_mem_type);
++
+ #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
+ extern void esi_call_phys (void);
+ EXPORT_SYMBOL_GPL(esi_call_phys);
+diff --git a/arch/x86/include/asm/crash.h b/arch/x86/include/asm/crash.h
+new file mode 100644
+index 0000000..dfcc006
+--- /dev/null
++++ b/arch/x86/include/asm/crash.h
+@@ -0,0 +1,75 @@
++#ifndef _ASM_I386_CRASH_H
++#define _ASM_I386_CRASH_H
++
++/*
++ * linux/include/asm-i386/crash.h
++ *
++ * Copyright (c) 2004 Red Hat, Inc. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2, or (at your option)
++ * any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifdef __KERNEL__
++
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <asm/mmzone.h>
++
++extern int page_is_ram(unsigned long);
++
++static inline void *
++map_virtual(u64 offset, struct page **pp)
++{
++	struct page *page;
++	unsigned long pfn;
++	void *vaddr;
++
++	pfn = (unsigned long)(offset >> PAGE_SHIFT);
++
++	if (!page_is_ram(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
++		return NULL;
++	}
++
++	if (!pfn_valid(pfn)) {
++		printk(KERN_INFO
++		    "crash memory driver: invalid pfn: %lx )\n", pfn);
++		return NULL;
++	}
++
++	page = pfn_to_page(pfn);
++
++	vaddr = kmap(page);
++	if (!vaddr) {
++		printk(KERN_INFO
++		    "crash memory driver: pfn: %lx kmap(page: %lx) failed\n", 
++			pfn, (unsigned long)page);
++		return NULL;
++	}
++
++	*pp = page;
++	return (vaddr + (offset & (PAGE_SIZE-1)));
++}
++
++static inline void unmap_virtual(struct page *page) 
++{ 
++	kunmap(page);
++}
++
++#endif /* __KERNEL__ */
++
++#endif /* _ASM_I386_CRASH_H */
+diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
+index 5eb1ba7..3e525d2 100644
+--- a/arch/x86/mm/ioremap.c
++++ b/arch/x86/mm/ioremap.c
+@@ -24,6 +24,8 @@
+ 
+ #include "physaddr.h"
+ 
++EXPORT_SYMBOL_GPL(page_is_ram);
++
+ /*
+  * Fix up the linear direct mapping of the kernel to avoid cache attribute
+  * conflicts.
+--- linux-2.6.39.noarch/drivers/char/Kconfig~	2011-06-29 23:41:24.386370545 -0400
++++ linux-2.6.39.noarch/drivers/char/Kconfig	2011-06-29 23:42:11.984193335 -0400
+@@ -15,6 +15,9 @@ config DEVKMEM
+ 	  kind of kernel debugging operations.
+ 	  When in doubt, say "N".
+ 
++config CRASH
++	tristate "Crash Utility memory driver"
++
+ config STALDRV
+ 	bool "Stallion multiport serial support"
+ 	depends on SERIAL_NONSTANDARD
+diff --git a/drivers/char/crash.c b/drivers/char/crash.c
+new file mode 100644
+index 0000000..e5437de
+--- /dev/null
++++ b/drivers/char/crash.c
+@@ -0,0 +1,128 @@
++/*
++ *  linux/drivers/char/crash.c
++ *
++ *  Copyright (C) 2004  Dave Anderson <anderson@redhat.com>
++ *  Copyright (C) 2004  Red Hat, Inc.
++ */
++
++/******************************************************************************
++ *
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2, or (at your option)
++ *   any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *****************************************************************************/
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/types.h>
++#include <asm/crash.h>
++
++#define CRASH_VERSION   "1.0"
++
++/*
++ *  These are the file operation functions that allow crash utility
++ *  access to physical memory.
++ */
++
++static loff_t 
++crash_llseek(struct file * file, loff_t offset, int orig)
++{
++	switch (orig) {
++	case 0:
++		file->f_pos = offset;
++		return file->f_pos;
++	case 1:
++		file->f_pos += offset;
++		return file->f_pos;
++	default:
++		return -EINVAL;
++	}
++}
++
++/*
++ *  Determine the page address for an address offset value, 
++ *  get a virtual address for it, and copy it out.
++ *  Accesses must fit within a page.
++ */
++static ssize_t
++crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
++{
++	void *vaddr;
++	struct page *page;
++	u64 offset;
++	ssize_t read;
++
++	offset = *poff;
++	if (offset >> PAGE_SHIFT != (offset+count-1) >> PAGE_SHIFT) 
++		return -EINVAL;
++
++	vaddr = map_virtual(offset, &page);
++	if (!vaddr)
++		return -EFAULT;
++
++	if (copy_to_user(buf, vaddr, count)) {
++		unmap_virtual(page);
++		return -EFAULT;
++	}
++	unmap_virtual(page);
++
++	read = count;
++	*poff += read;
++	return read;
++}
++
++static struct file_operations crash_fops = {
++	.owner = THIS_MODULE,
++	.llseek = crash_llseek,
++	.read = crash_read,
++};
++
++static struct miscdevice crash_dev = {
++	MISC_DYNAMIC_MINOR,
++	"crash",
++	&crash_fops
++};
++
++static int __init
++crash_init(void)
++{
++	int ret;
++
++	ret = misc_register(&crash_dev);
++	if (ret) {
++		printk(KERN_ERR 
++		    "crash memory driver: cannot misc_register (MISC_DYNAMIC_MINOR)\n");
++		goto out;
++	}
++	
++	ret = 0;
++	printk(KERN_INFO "crash memory driver: version %s\n", CRASH_VERSION);
++out:
++	return ret;
++}
++
++static void __exit
++crash_cleanup_module(void)
++{
++	misc_deregister(&crash_dev);
++}
++
++module_init(crash_init);
++module_exit(crash_cleanup_module);
++
++MODULE_LICENSE("GPL");
+
+diff --git a/drivers/char/Makefile b/drivers/char/Makefile
+index ba53ec9..6588b33 100644
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -98,3 +98,5 @@ obj-$(CONFIG_RAMOOPS)		+= ramoops.o
+ 
+ obj-$(CONFIG_JS_RTC)		+= js-rtc.o
+ js-rtc-y = rtc.o
++
++obj-$(CONFIG_CRASH)		+= crash.o

linux-2.6-debug-taint-vm.patch

@@ -0,0 +1,65 @@
+From b04c57d9dc889462951312be2ac81ff6c702e954 Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@phobos.i.jkkm.org>
+Date: Wed, 8 Jul 2009 13:05:09 -0400
+Subject: [PATCH 3/6] fedora: linux-2.6-debug-taint-vm.patch
+
+---
+ kernel/panic.c  |    4 +++-
+ mm/slab.c       |    8 ++++----
+ mm/slub.c       |    2 +-
+ 4 files changed, 11 insertions(+), 8 deletions(-)
+
+diff --git a/kernel/panic.c b/kernel/panic.c
+index 984b3ec..6d1c3be 100644
+--- a/kernel/panic.c
++++ b/kernel/panic.c
+@@ -199,6 +199,7 @@ const char *print_tainted(void)
+ 
+ 	return buf;
+ }
++EXPORT_SYMBOL(print_tainted);
+ 
+ int test_taint(unsigned flag)
+ {
+diff --git a/mm/slab.c b/mm/slab.c
+index e74a16e..7bc287e 100644
+--- a/mm/slab.c
++++ b/mm/slab.c
+@@ -1803,8 +1803,8 @@ static void check_poison_obj(struct kmem_cache *cachep, void *objp)
+ 			/* Print header */
+ 			if (lines == 0) {
+ 				printk(KERN_ERR
+-					"Slab corruption: %s start=%p, len=%d\n",
+-					cachep->name, realobj, size);
++					"Slab corruption (%s): %s start=%p, len=%d\n",
++					print_tainted(), cachep->name, realobj, size);
+ 				print_objinfo(cachep, objp, 0);
+ 			}
+ 			/* Hexdump the affected line */
+@@ -2902,8 +2902,8 @@ static void check_slabp(struct kmem_cache *cachep, struct slab *slabp)
+ 	if (entries != cachep->num - slabp->inuse) {
+ bad:
+ 		printk(KERN_ERR "slab: Internal list corruption detected in "
+-				"cache '%s'(%d), slabp %p(%d). Hexdump:\n",
+-			cachep->name, cachep->num, slabp, slabp->inuse);
++				"cache '%s'(%d), slabp %p(%d). Tainted(%s). Hexdump:\n",
++			cachep->name, cachep->num, slabp, slabp->inuse, print_tainted());
+ 		for (i = 0;
+ 		     i < sizeof(*slabp) + cachep->num * sizeof(kmem_bufctl_t);
+ 		     i++) {
+diff --git a/mm/slub.c b/mm/slub.c
+index 819f056..8eff0f4 100644
+--- a/mm/slub.c
++++ b/mm/slub.c
+@@ -433,7 +433,7 @@ static void slab_bug(struct kmem_cache *s, char *fmt, ...)
+ 	va_end(args);
+ 	printk(KERN_ERR "========================================"
+ 			"=====================================\n");
+-	printk(KERN_ERR "BUG %s: %s\n", s->name, buf);
++	printk(KERN_ERR "BUG %s (%s): %s\n", s->name, print_tainted(), buf);
+ 	printk(KERN_ERR "----------------------------------------"
+ 			"-------------------------------------\n\n");
+ }
+-- 
+1.6.2.5
+

linux-2.6-debug-vm-would-have-oomkilled.patch

@@ -0,0 +1,69 @@
+From beb764ac03e52eba1a654afb4273fab1f9de3cff Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@mcmartin.ca>
+Date: Mon, 29 Nov 2010 20:59:14 -0500
+Subject: [PATCH] linux-2.6-debug-vm-would_have_oomkilled
+
+---
+ include/linux/oom.h |    1 +
+ kernel/sysctl.c     |    7 +++++++
+ mm/oom_kill.c       |    8 ++++++++
+ 3 files changed, 16 insertions(+), 0 deletions(-)
+
+diff --git a/include/linux/oom.h b/include/linux/oom.h
+index 5e3aa83..79a27b4 100644
+--- a/include/linux/oom.h
++++ b/include/linux/oom.h
+@@ -72,5 +72,6 @@ extern struct task_struct *find_lock_task_mm(struct task_struct *p);
+ extern int sysctl_oom_dump_tasks;
+ extern int sysctl_oom_kill_allocating_task;
+ extern int sysctl_panic_on_oom;
++extern int sysctl_would_have_oomkilled;
+ #endif /* __KERNEL__*/
+ #endif /* _INCLUDE_LINUX_OOM_H */
+diff --git a/kernel/sysctl.c b/kernel/sysctl.c
+index 5abfa15..a0fed6d 100644
+--- a/kernel/sysctl.c
++++ b/kernel/sysctl.c
+@@ -1000,6 +1000,13 @@ static struct ctl_table vm_table[] = {
+ 		.proc_handler	= proc_dointvec,
+ 	},
+ 	{
++		.procname	= "would_have_oomkilled",
++		.data		= &sysctl_would_have_oomkilled,
++		.maxlen		= sizeof(sysctl_would_have_oomkilled),
++		.mode		= 0644,
++		.proc_handler	= proc_dointvec,
++	},
++	{
+ 		.procname	= "overcommit_ratio",
+ 		.data		= &sysctl_overcommit_ratio,
+ 		.maxlen		= sizeof(sysctl_overcommit_ratio),
+diff --git a/mm/oom_kill.c b/mm/oom_kill.c
+index 7dcca55..281ac39 100644
+--- a/mm/oom_kill.c
++++ b/mm/oom_kill.c
+@@ -35,6 +35,7 @@
+ int sysctl_panic_on_oom;
+ int sysctl_oom_kill_allocating_task;
+ int sysctl_oom_dump_tasks = 1;
++int sysctl_would_have_oomkilled;
+ static DEFINE_SPINLOCK(zone_scan_lock);
+ 
+ #ifdef CONFIG_NUMA
+@@ -477,6 +478,13 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
+ 	}
+ 
+ 	task_lock(p);
++	if (sysctl_would_have_oomkilled) {
++		printk(KERN_ERR "%s: would have killed process %d (%s), but continuing instead...\n",
++			__func__, task_pid_nr(p), p->comm);
++		task_unlock(p);
++		return 0;
++	}
++
+ 	pr_err("%s: Kill process %d (%s) score %d or sacrifice child\n",
+ 		message, task_pid_nr(p), p->comm, points);
+ 	task_unlock(p);
+-- 
+1.7.3.2
+

linux-2.6-defaults-acpi-video.patch

@@ -0,0 +1,13 @@
+diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
+index d8d7596..a1b7117 100644
+--- a/drivers/acpi/video.c
++++ b/drivers/acpi/video.c
+@@ -71,7 +71,7 @@ MODULE_AUTHOR("Bruno Ducrot");
+ MODULE_DESCRIPTION("ACPI Video Driver");
+ MODULE_LICENSE("GPL");
+ 
+-static int brightness_switch_enabled = 1;
++static int brightness_switch_enabled = 0;
+ module_param(brightness_switch_enabled, bool, 0644);
+ 
+ static int acpi_video_bus_add(struct acpi_device *device);

linux-2.6-defaults-aspm.patch

@@ -0,0 +1,12 @@
+diff -up linux-2.6.30.noarch/drivers/pci/pcie/aspm.c.mjg linux-2.6.30.noarch/drivers/pci/pcie/aspm.c
+--- linux-2.6.30.noarch/drivers/pci/pcie/aspm.c.mjg	2009-07-16 22:01:11.000000000 +0100
++++ linux-2.6.30.noarch/drivers/pci/pcie/aspm.c	2009-07-16 22:01:30.000000000 +0100
+@@ -65,7 +65,7 @@ static LIST_HEAD(link_list);
+ #define POLICY_DEFAULT 0	/* BIOS default setting */
+ #define POLICY_PERFORMANCE 1	/* high performance */
+ #define POLICY_POWERSAVE 2	/* high power saving */
+-static int aspm_policy;
++static int aspm_policy = POLICY_POWERSAVE;
+ static const char *policy_str[] = {
+ 	[POLICY_DEFAULT] = "default",
+ 	[POLICY_PERFORMANCE] = "performance",

linux-2.6-defaults-pci_no_msi.patch

@@ -0,0 +1,110 @@
+From 14bdd0d36f5284108468bb73afd50726b07c7a84 Mon Sep 17 00:00:00 2001
+From: Kyle McMartin <kyle@phobos.i.jkkm.org>
+Date: Mon, 29 Mar 2010 23:43:49 -0400
+Subject: linux-2.6-defaults-pci_no_msi
+
+---
+ Documentation/kernel-parameters.txt |    3 +++
+ drivers/pci/Kconfig                 |   12 ++++++++++++
+ drivers/pci/msi.c                   |    9 +++++++++
+ drivers/pci/pci.c                   |    2 ++
+ drivers/pci/pci.h                   |    2 ++
+ 5 files changed, 28 insertions(+), 0 deletions(-)
+
+diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
+index e4cbca5..8154a0f 100644
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -1911,6 +1911,9 @@ and is between 256 and 4096 characters. It is defined in the file
+ 		check_enable_amd_mmconf [X86] check for and enable
+ 				properly configured MMIO access to PCI
+ 				config space on AMD family 10h CPU
++		msi		[MSI] If the PCI_MSI kernel config parameter is
++				enabled, this kernel boot option can be used to
++				enable the use of MSI interrupts system-wide.
+ 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
+ 				enabled, this kernel boot option can be used to
+ 				disable the use of MSI interrupts system-wide.
+diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
+index 7858a11..b12fcad 100644
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -21,6 +21,18 @@ config PCI_MSI
+ 
+ 	   If you don't know what to do here, say Y.
+ 
++config PCI_MSI_DEFAULT_ON
++	def_bool y
++	prompt "Use Message Signaled Interrupts by default"
++	depends on PCI_MSI
++	help
++	  Selecting this option will enable use of PCI MSI where applicable
++	  by default. Support for MSI can be disabled through the use of the
++	  pci=nomsi boot flag. Conversely, if this option is not selected,
++	  support for PCI MSI can be enabled by passing the pci=msi flag.
++
++	  If you don't know what to do here, say N.
++
+ config PCI_DEBUG
+ 	bool "PCI Debugging"
+ 	depends on PCI && DEBUG_KERNEL
+diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
+index f9cf317..6b0539a 100644
+--- a/drivers/pci/msi.c
++++ b/drivers/pci/msi.c
+@@ -22,7 +22,11 @@
+ #include "pci.h"
+ #include "msi.h"
+ 
++#ifdef CONFIG_PCI_MSI_DEFAULT_ON
+ static int pci_msi_enable = 1;
++#else
++static int pci_msi_enable = 0;
++#endif /*CONFIG_PCI_MSI_DEFAULT_ON*/
+ 
+ /* Arch hooks */
+ 
+@@ -836,6 +840,11 @@ int pci_msi_enabled(void)
+ }
+ EXPORT_SYMBOL(pci_msi_enabled);
+ 
++void pci_yes_msi(void)
++{
++	pci_msi_enable = 1;
++}
++
+ void pci_msi_init_pci_dev(struct pci_dev *dev)
+ {
+ 	INIT_LIST_HEAD(&dev->msi_list);
+diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
+index 1531f3a..3cb332b 100644
+--- a/drivers/pci/pci.c
++++ b/drivers/pci/pci.c
+@@ -2983,6 +2983,8 @@ static int __init pci_setup(char *str)
+ 		if (*str && (str = pcibios_setup(str)) && *str) {
+ 			if (!strcmp(str, "nomsi")) {
+ 				pci_no_msi();
++			} else if (!strcmp(str, "msi")) {
++				pci_yes_msi();
+ 			} else if (!strcmp(str, "noaer")) {
+ 				pci_no_aer();
+ 			} else if (!strcmp(str, "nodomains")) {
+diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
+index 4eb10f4..caa051e 100644
+--- a/drivers/pci/pci.h
++++ b/drivers/pci/pci.h
+@@ -122,9 +122,11 @@ extern unsigned int pci_pm_d3_delay;
+ 
+ #ifdef CONFIG_PCI_MSI
+ void pci_no_msi(void);
++void pci_yes_msi(void);
+ extern void pci_msi_init_pci_dev(struct pci_dev *dev);
+ #else
+ static inline void pci_no_msi(void) { }
++static inline void pci_yes_msi(void) { }
+ static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { }
+ #endif
+ 
+-- 
+1.7.0.1
+