kernel-5.11.0-0.rc3.122

* Mon Jan 11 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.11.0-0.rc3.122]
- irq: export irq_check_status_bit (Levi Yun)
- Turn off vdso_install for ppc ("Justin M. Forbes")
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>

.gitignore

@@ -1,7 +1,2 @@
-clog
 *.xz
 *.bz2
-*.rpm
-*.orig
-kernel-[234].*/
-perf-man-*.tar.gz

0001-mm-CONFIG_NR_ZONES_EXTENDED.patch

@@ -1,173 +0,0 @@
-From 8b368e8e961944105945fbe36f3f264252bfd19a Mon Sep 17 00:00:00 2001
-From: Dan Williams <dan.j.williams@intel.com>
-Date: Thu, 25 Feb 2016 01:02:30 +0000
-Subject: [PATCH] mm: CONFIG_NR_ZONES_EXTENDED
-
-ZONE_DEVICE (merged in 4.3) and ZONE_CMA (proposed) are examples of new mm
-zones that are bumping up against the current maximum limit of 4 zones,
-i.e.  2 bits in page->flags.  When adding a zone this equation still needs
-to be satisified:
-
-    SECTIONS_WIDTH + ZONES_WIDTH + NODES_SHIFT + LAST_CPUPID_SHIFT
-	  <= BITS_PER_LONG - NR_PAGEFLAGS
-
-ZONE_DEVICE currently tries to satisfy this equation by requiring that
-ZONE_DMA be disabled, but this is untenable given generic kernels want to
-support ZONE_DEVICE and ZONE_DMA simultaneously.  ZONE_CMA would like to
-increase the amount of memory covered per section, but that limits the
-minimum granularity at which consecutive memory ranges can be added via
-devm_memremap_pages().
-
-The trade-off of what is acceptable to sacrifice depends heavily on the
-platform.  For example, ZONE_CMA is targeted for 32-bit platforms where
-page->flags is constrained, but those platforms likely do not care about
-the minimum granularity of memory hotplug.  A big iron machine with 1024
-numa nodes can likely sacrifice ZONE_DMA where a general purpose
-distribution kernel can not.
-
-CONFIG_NR_ZONES_EXTENDED is a configuration symbol that gets selected when
-the number of configured zones exceeds 4.  It documents the configuration
-symbols and definitions that get modified when ZONES_WIDTH is greater than
-2.
-
-For now, it steals a bit from NODES_SHIFT.  Later on it can be used to
-document the definitions that get modified when a 32-bit configuration
-wants more zone bits.
-
-Note that GFP_ZONE_TABLE poses an interesting constraint since
-include/linux/gfp.h gets included by the 32-bit portion of a 64-bit build.
-We need to be careful to only build the table for zones that have a
-corresponding gfp_t flag.  GFP_ZONES_SHIFT is introduced for this purpose.
-This patch does not attempt to solve the problem of adding a new zone
-that also has a corresponding GFP_ flag.
-
-Link: https://bugzilla.kernel.org/show_bug.cgi?id=110931
-Fixes: 033fbae988fc ("mm: ZONE_DEVICE for "device memory"")
-Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-Reported-by: Mark <markk@clara.co.uk>
-Cc: Mel Gorman <mgorman@suse.de>
-Cc: Rik van Riel <riel@redhat.com>
-Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
-Cc: Dave Hansen <dave.hansen@linux.intel.com>
-Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
- arch/x86/Kconfig                  |  6 ++++--
- include/linux/gfp.h               | 33 ++++++++++++++++++++-------------
- include/linux/page-flags-layout.h |  2 ++
- mm/Kconfig                        |  7 +++++--
- 4 files changed, 31 insertions(+), 17 deletions(-)
-
-diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
-index 3fef519..b94704a 100644
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -1409,8 +1409,10 @@ config NUMA_EMU
- 
- config NODES_SHIFT
- 	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
--	range 1 10
--	default "10" if MAXSMP
-+	range 1 10 if !NR_ZONES_EXTENDED
-+	range 1 9 if NR_ZONES_EXTENDED
-+	default "10" if MAXSMP && !NR_ZONES_EXTENDED
-+	default "9" if MAXSMP && NR_ZONES_EXTENDED
- 	default "6" if X86_64
- 	default "3"
- 	depends on NEED_MULTIPLE_NODES
-diff --git a/include/linux/gfp.h b/include/linux/gfp.h
-index af1f2b2..d201d8a 100644
---- a/include/linux/gfp.h
-+++ b/include/linux/gfp.h
-@@ -329,22 +329,29 @@ static inline bool gfpflags_allow_blocking(const gfp_t gfp_flags)
-  *       0xe    => BAD (MOVABLE+DMA32+HIGHMEM)
-  *       0xf    => BAD (MOVABLE+DMA32+HIGHMEM+DMA)
-  *
-- * ZONES_SHIFT must be <= 2 on 32 bit platforms.
-+ * GFP_ZONES_SHIFT must be <= 2 on 32 bit platforms.
-  */
- 
--#if 16 * ZONES_SHIFT > BITS_PER_LONG
--#error ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
-+#if defined(CONFIG_ZONE_DEVICE) && (MAX_NR_ZONES-1) <= 4
-+/* ZONE_DEVICE is not a valid GFP zone specifier */
-+#define GFP_ZONES_SHIFT 2
-+#else
-+#define GFP_ZONES_SHIFT ZONES_SHIFT
-+#endif
-+
-+#if 16 * GFP_ZONES_SHIFT > BITS_PER_LONG
-+#error GFP_ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
- #endif
- 
- #define GFP_ZONE_TABLE ( \
--	(ZONE_NORMAL << 0 * ZONES_SHIFT)				      \
--	| (OPT_ZONE_DMA << ___GFP_DMA * ZONES_SHIFT)			      \
--	| (OPT_ZONE_HIGHMEM << ___GFP_HIGHMEM * ZONES_SHIFT)		      \
--	| (OPT_ZONE_DMA32 << ___GFP_DMA32 * ZONES_SHIFT)		      \
--	| (ZONE_NORMAL << ___GFP_MOVABLE * ZONES_SHIFT)			      \
--	| (OPT_ZONE_DMA << (___GFP_MOVABLE | ___GFP_DMA) * ZONES_SHIFT)	      \
--	| (ZONE_MOVABLE << (___GFP_MOVABLE | ___GFP_HIGHMEM) * ZONES_SHIFT)   \
--	| (OPT_ZONE_DMA32 << (___GFP_MOVABLE | ___GFP_DMA32) * ZONES_SHIFT)   \
-+	(ZONE_NORMAL << 0 * GFP_ZONES_SHIFT)					\
-+	| (OPT_ZONE_DMA << ___GFP_DMA * GFP_ZONES_SHIFT)			\
-+	| (OPT_ZONE_HIGHMEM << ___GFP_HIGHMEM * GFP_ZONES_SHIFT)		\
-+	| (OPT_ZONE_DMA32 << ___GFP_DMA32 * GFP_ZONES_SHIFT)		      	\
-+	| (ZONE_NORMAL << ___GFP_MOVABLE * GFP_ZONES_SHIFT)			\
-+	| (OPT_ZONE_DMA << (___GFP_MOVABLE | ___GFP_DMA) * GFP_ZONES_SHIFT)	\
-+	| (ZONE_MOVABLE << (___GFP_MOVABLE | ___GFP_HIGHMEM) * GFP_ZONES_SHIFT)	\
-+	| (OPT_ZONE_DMA32 << (___GFP_MOVABLE | ___GFP_DMA32) * GFP_ZONES_SHIFT)	\
- )
- 
- /*
-@@ -369,8 +376,8 @@ static inline enum zone_type gfp_zone(gfp_t flags)
- 	enum zone_type z;
- 	int bit = (__force int) (flags & GFP_ZONEMASK);
- 
--	z = (GFP_ZONE_TABLE >> (bit * ZONES_SHIFT)) &
--					 ((1 << ZONES_SHIFT) - 1);
-+	z = (GFP_ZONE_TABLE >> (bit * GFP_ZONES_SHIFT)) &
-+					 ((1 << GFP_ZONES_SHIFT) - 1);
- 	VM_BUG_ON((GFP_ZONE_BAD >> bit) & 1);
- 	return z;
- }
-diff --git a/include/linux/page-flags-layout.h b/include/linux/page-flags-layout.h
-index da52366..77b078c 100644
---- a/include/linux/page-flags-layout.h
-+++ b/include/linux/page-flags-layout.h
-@@ -17,6 +17,8 @@
- #define ZONES_SHIFT 1
- #elif MAX_NR_ZONES <= 4
- #define ZONES_SHIFT 2
-+#elif MAX_NR_ZONES <= 8
-+#define ZONES_SHIFT 3
- #else
- #error ZONES_SHIFT -- too many zones configured adjust calculation
- #endif
-diff --git a/mm/Kconfig b/mm/Kconfig
-index 031a329..7826216 100644
---- a/mm/Kconfig
-+++ b/mm/Kconfig
-@@ -652,8 +652,6 @@ config IDLE_PAGE_TRACKING
- 
- config ZONE_DEVICE
- 	bool "Device memory (pmem, etc...) hotplug support"
--	default !ZONE_DMA
--	depends on !ZONE_DMA
- 	depends on MEMORY_HOTPLUG
- 	depends on MEMORY_HOTREMOVE
- 	depends on X86_64 #arch_add_memory() comprehends device memory
-@@ -667,5 +665,10 @@ config ZONE_DEVICE
- 
- 	  If FS_DAX is enabled, then say Y.
- 
-+config NR_ZONES_EXTENDED
-+	bool
-+	default n if !64BIT
-+	default y if ZONE_DEVICE && ZONE_DMA && ZONE_DMA32
-+
- config FRAME_VECTOR
- 	bool
--- 
-2.5.0
-

0001-vsock-Fix-blocking-ops-call-in-prepare_to_wait.patch

@@ -1,170 +0,0 @@
-From b5671c331cc2e78c83fc826a69dff461903c0fd5 Mon Sep 17 00:00:00 2001
-From: Laura Abbott <labbott@fedoraproject.org>
-Date: Mon, 25 Jan 2016 15:10:02 -0800
-Subject: [PATCHv2] vsock: Fix blocking ops call in prepare_to_wait
-To: "David S. Miller" <davem@davemloft.net>
-Cc: netdev@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-To: Aditya Asarwade <asarwade@vmware.com>
-To: Thomas Hellstrom <thellstrom@vmware.com>
-To: Jorgen Hansen <jhansen@vmware.com>
-
-We receoved a bug report from someone using vmware:
-
-WARNING: CPU: 3 PID: 660 at kernel/sched/core.c:7389
-__might_sleep+0x7d/0x90()
-do not call blocking ops when !TASK_RUNNING; state=1 set at
-[<ffffffff810fa68d>] prepare_to_wait+0x2d/0x90
-Modules linked in: vmw_vsock_vmci_transport vsock snd_seq_midi
-snd_seq_midi_event snd_ens1371 iosf_mbi gameport snd_rawmidi
-snd_ac97_codec ac97_bus snd_seq coretemp snd_seq_device snd_pcm
-snd_timer snd soundcore ppdev crct10dif_pclmul crc32_pclmul
-ghash_clmulni_intel vmw_vmci vmw_balloon i2c_piix4 shpchp parport_pc
-parport acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc btrfs
-xor raid6_pq 8021q garp stp llc mrp crc32c_intel serio_raw mptspi vmwgfx
-drm_kms_helper ttm drm scsi_transport_spi mptscsih e1000 ata_generic
-mptbase pata_acpi
-CPU: 3 PID: 660 Comm: vmtoolsd Not tainted
-4.2.0-0.rc1.git3.1.fc23.x86_64 #1
-Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
-Reference Platform, BIOS 6.00 05/20/2014
- 0000000000000000 0000000049e617f3 ffff88006ac37ac8 ffffffff818641f5
- 0000000000000000 ffff88006ac37b20 ffff88006ac37b08 ffffffff810ab446
- ffff880068009f40 ffffffff81c63bc0 0000000000000061 0000000000000000
-Call Trace:
- [<ffffffff818641f5>] dump_stack+0x4c/0x65
- [<ffffffff810ab446>] warn_slowpath_common+0x86/0xc0
- [<ffffffff810ab4d5>] warn_slowpath_fmt+0x55/0x70
- [<ffffffff8112551d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
- [<ffffffff810fa68d>] ? prepare_to_wait+0x2d/0x90
- [<ffffffff810fa68d>] ? prepare_to_wait+0x2d/0x90
- [<ffffffff810da2bd>] __might_sleep+0x7d/0x90
- [<ffffffff812163b3>] __might_fault+0x43/0xa0
- [<ffffffff81430477>] copy_from_iter+0x87/0x2a0
- [<ffffffffa039460a>] __qp_memcpy_to_queue+0x9a/0x1b0 [vmw_vmci]
- [<ffffffffa0394740>] ? qp_memcpy_to_queue+0x20/0x20 [vmw_vmci]
- [<ffffffffa0394757>] qp_memcpy_to_queue_iov+0x17/0x20 [vmw_vmci]
- [<ffffffffa0394d50>] qp_enqueue_locked+0xa0/0x140 [vmw_vmci]
- [<ffffffffa039593f>] vmci_qpair_enquev+0x4f/0xd0 [vmw_vmci]
- [<ffffffffa04847bb>] vmci_transport_stream_enqueue+0x1b/0x20
-[vmw_vsock_vmci_transport]
- [<ffffffffa047ae05>] vsock_stream_sendmsg+0x2c5/0x320 [vsock]
- [<ffffffff810fabd0>] ? wake_atomic_t_function+0x70/0x70
- [<ffffffff81702af8>] sock_sendmsg+0x38/0x50
- [<ffffffff81702ff4>] SYSC_sendto+0x104/0x190
- [<ffffffff8126e25a>] ? vfs_read+0x8a/0x140
- [<ffffffff817042ee>] SyS_sendto+0xe/0x10
- [<ffffffff8186d9ae>] entry_SYSCALL_64_fastpath+0x12/0x76
-
-transport->stream_enqueue may call copy_to_user so it should
-not be called inside a prepare_to_wait. Narrow the scope of
-the prepare_to_wait to avoid the bad call. This also applies
-to vsock_stream_recvmsg as well.
-
-Reported-by: Vinson Lee <vlee@freedesktop.org>
-Tested-by: Vinson Lee <vlee@freedesktop.org>
-Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
----
-v2: fix same issue in recvmsg path as well.
----
- net/vmw_vsock/af_vsock.c | 19 ++++++-------------
- 1 file changed, 6 insertions(+), 13 deletions(-)
-
-diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
-index 7fd1220..bbe65dc 100644
---- a/net/vmw_vsock/af_vsock.c
-+++ b/net/vmw_vsock/af_vsock.c
-@@ -1557,8 +1557,6 @@ static int vsock_stream_sendmsg(struct socket *sock, struct msghdr *msg,
- 	if (err < 0)
- 		goto out;
- 
--	prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
--
- 	while (total_written < len) {
- 		ssize_t written;
- 
-@@ -1578,7 +1576,9 @@ static int vsock_stream_sendmsg(struct socket *sock, struct msghdr *msg,
- 				goto out_wait;
- 
- 			release_sock(sk);
-+			prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
- 			timeout = schedule_timeout(timeout);
-+			finish_wait(sk_sleep(sk), &wait);
- 			lock_sock(sk);
- 			if (signal_pending(current)) {
- 				err = sock_intr_errno(timeout);
-@@ -1588,8 +1588,6 @@ static int vsock_stream_sendmsg(struct socket *sock, struct msghdr *msg,
- 				goto out_wait;
- 			}
- 
--			prepare_to_wait(sk_sleep(sk), &wait,
--					TASK_INTERRUPTIBLE);
- 		}
- 
- 		/* These checks occur both as part of and after the loop
-@@ -1635,7 +1633,6 @@ static int vsock_stream_sendmsg(struct socket *sock, struct msghdr *msg,
- out_wait:
- 	if (total_written > 0)
- 		err = total_written;
--	finish_wait(sk_sleep(sk), &wait);
- out:
- 	release_sock(sk);
- 	return err;
-@@ -1716,7 +1713,6 @@ vsock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
- 	if (err < 0)
- 		goto out;
- 
--	prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
- 
- 	while (1) {
- 		s64 ready = vsock_stream_has_data(vsk);
-@@ -1727,7 +1723,7 @@ vsock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
- 			 */
- 
- 			err = -ENOMEM;
--			goto out_wait;
-+			goto out;
- 		} else if (ready > 0) {
- 			ssize_t read;
- 
-@@ -1750,7 +1746,7 @@ vsock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
- 					vsk, target, read,
- 					!(flags & MSG_PEEK), &recv_data);
- 			if (err < 0)
--				goto out_wait;
-+				goto out;
- 
- 			if (read >= target || flags & MSG_PEEK)
- 				break;
-@@ -1773,7 +1769,9 @@ vsock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
- 				break;
- 
- 			release_sock(sk);
-+			prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
- 			timeout = schedule_timeout(timeout);
-+			finish_wait(sk_sleep(sk), &wait);
- 			lock_sock(sk);
- 
- 			if (signal_pending(current)) {
-@@ -1783,9 +1781,6 @@ vsock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
- 				err = -EAGAIN;
- 				break;
- 			}
--
--			prepare_to_wait(sk_sleep(sk), &wait,
--					TASK_INTERRUPTIBLE);
- 		}
- 	}
- 
-@@ -1816,8 +1811,6 @@ vsock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
- 		err = copied;
- 	}
- 
--out_wait:
--	finish_wait(sk_sleep(sk), &wait);
- out:
- 	release_sock(sk);
- 	return err;
--- 
-2.5.0
-

ACPI-Limit-access-to-custom_method.patch

@@ -1,31 +0,0 @@
-From 4b85149b764cd024e3dd2aff9eb22a9e1aadd1fa Mon Sep 17 00:00:00 2001
-From: Matthew Garrett <matthew.garrett@nebula.com>
-Date: Fri, 9 Mar 2012 08:39:37 -0500
-Subject: [PATCH 04/20] ACPI: Limit access to custom_method
-
-custom_method effectively allows arbitrary access to system memory, making
-it possible for an attacker to circumvent restrictions on module loading.
-Disable it if any such restrictions have been enabled.
-
-Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
----
- drivers/acpi/custom_method.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/drivers/acpi/custom_method.c b/drivers/acpi/custom_method.c
-index c68e72414a67..4277938af700 100644
---- a/drivers/acpi/custom_method.c
-+++ b/drivers/acpi/custom_method.c
-@@ -29,6 +29,9 @@ static ssize_t cm_write(struct file *file, const char __user * user_buf,
- 	struct acpi_table_header table;
- 	acpi_status status;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	if (!(*ppos)) {
- 		/* parse the table header to get the table length */
- 		if (count <= sizeof(struct acpi_table_header))
--- 
-2.4.3
-

ARM-tegra-usb-no-reset.patch

@@ -1,28 +0,0 @@
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 3 May 2012 20:27:11 +0100
-Subject: [PATCH] ARM: tegra: usb no reset
-
-Patch for disconnect issues with storage attached to a
- tegra-ehci controller
----
- drivers/usb/core/hub.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
-index 43cb2f2e3b43..7f838ec11c81 100644
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct *work)
- 			(u16) hub->change_bits[0],
- 			(u16) hub->event_bits[0]);
- 
-+	/* Don't disconnect USB-SATA on TrimSlice */
-+	if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
-+		if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
-+				(hub->event_bits[0] == 0x2))
-+			hub->event_bits[0] = 0;
-+	}
-+
- 	/* Lock the device, then check to see if we were
- 	 * disconnected while waiting for the lock to succeed. */
- 	usb_lock_device(hdev);

Add-EFI-signature-data-types.patch

@@ -1,57 +0,0 @@
-From 47f6b5c281137394d627e275cb80980492d00d84 Mon Sep 17 00:00:00 2001
-From: Dave Howells <dhowells@redhat.com>
-Date: Tue, 23 Oct 2012 09:30:54 -0400
-Subject: [PATCH 15/20] Add EFI signature data types
-
-Add the data types that are used for containing hashes, keys and certificates
-for cryptographic verification.
-
-Bugzilla: N/A
-Upstream-status: Fedora mustard for now
-
-Signed-off-by: David Howells <dhowells@redhat.com>
----
- include/linux/efi.h | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
-diff --git a/include/linux/efi.h b/include/linux/efi.h
-index 4dc970e..82d6218 100644
---- a/include/linux/efi.h
-+++ b/include/linux/efi.h
-@@ -599,6 +599,12 @@ void efi_native_runtime_setup(void);
- #define EFI_PROPERTIES_TABLE_GUID \
-     EFI_GUID(  0x880aaca3, 0x4adc, 0x4a04, 0x90, 0x79, 0xb7, 0x47, 0x34, 0x08, 0x25, 0xe5 )
- 
-+#define EFI_CERT_SHA256_GUID \
-+    EFI_GUID(  0xc1c41626, 0x504c, 0x4092, 0xac, 0xa9, 0x41, 0xf9, 0x36, 0x93, 0x43, 0x28 )
-+
-+#define EFI_CERT_X509_GUID \
-+    EFI_GUID(  0xa5c059a1, 0x94e4, 0x4aa7, 0x87, 0xb5, 0xab, 0x15, 0x5c, 0x2b, 0xf0, 0x72 )
-+
- typedef struct {
- 	efi_guid_t guid;
- 	u64 table;
-@@ -823,6 +829,20 @@ typedef struct {
- 
- #define EFI_INVALID_TABLE_ADDR		(~0UL)
- 
-+typedef struct  {
-+	efi_guid_t signature_owner;
-+	u8 signature_data[];
-+} efi_signature_data_t;
-+
-+typedef struct {
-+	efi_guid_t signature_type;
-+	u32 signature_list_size;
-+	u32 signature_header_size;
-+	u32 signature_size;
-+	u8 signature_header[];
-+	/* efi_signature_data_t signatures[][] */
-+} efi_signature_list_t;
-+
- /*
-  * All runtime access to EFI goes through this structure:
-  */
--- 
-2.5.0
-

Add-an-EFI-signature-blob-parser-and-key-loader.patch

@@ -1,179 +0,0 @@
-From c279ba86f93cf6a75d078e2d0e3f59d4ba8a2dd0 Mon Sep 17 00:00:00 2001
-From: Dave Howells <dhowells@redhat.com>
-Date: Tue, 23 Oct 2012 09:36:28 -0400
-Subject: [PATCH 16/20] Add an EFI signature blob parser and key loader.
-
-X.509 certificates are loaded into the specified keyring as asymmetric type
-keys.
-
-Signed-off-by: David Howells <dhowells@redhat.com>
----
- crypto/asymmetric_keys/Kconfig      |   8 +++
- crypto/asymmetric_keys/Makefile     |   1 +
- crypto/asymmetric_keys/efi_parser.c | 109 ++++++++++++++++++++++++++++++++++++
- include/linux/efi.h                 |   4 ++
- 4 files changed, 122 insertions(+)
- create mode 100644 crypto/asymmetric_keys/efi_parser.c
-
-diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
-index 4870f28403f5..4a1b50d73b80 100644
---- a/crypto/asymmetric_keys/Kconfig
-+++ b/crypto/asymmetric_keys/Kconfig
-@@ -67,4 +67,12 @@ config SIGNED_PE_FILE_VERIFICATION
- 	  This option provides support for verifying the signature(s) on a
- 	  signed PE binary.
- 
-+config EFI_SIGNATURE_LIST_PARSER
-+	bool "EFI signature list parser"
-+	depends on EFI
-+	select X509_CERTIFICATE_PARSER
-+	help
-+	  This option provides support for parsing EFI signature lists for
-+	  X.509 certificates and turning them into keys.
-+
- endif # ASYMMETRIC_KEY_TYPE
-diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
-index cd1406f9b14a..d9db380bbe53 100644
---- a/crypto/asymmetric_keys/Makefile
-+++ b/crypto/asymmetric_keys/Makefile
-@@ -8,6 +8,7 @@ asymmetric_keys-y := asymmetric_type.o signature.o
- 
- obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
- obj-$(CONFIG_PUBLIC_KEY_ALGO_RSA) += rsa.o
-+obj-$(CONFIG_EFI_SIGNATURE_LIST_PARSER) += efi_parser.o
- 
- #
- # X.509 Certificate handling
-diff --git a/crypto/asymmetric_keys/efi_parser.c b/crypto/asymmetric_keys/efi_parser.c
-new file mode 100644
-index 000000000000..424896a0b169
---- /dev/null
-+++ b/crypto/asymmetric_keys/efi_parser.c
-@@ -0,0 +1,109 @@
-+/* EFI signature/key/certificate list parser
-+ *
-+ * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
-+ * Written by David Howells (dhowells@redhat.com)
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public Licence
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the Licence, or (at your option) any later version.
-+ */
-+
-+#define pr_fmt(fmt) "EFI: "fmt
-+#include <linux/module.h>
-+#include <linux/printk.h>
-+#include <linux/err.h>
-+#include <linux/efi.h>
-+#include <keys/asymmetric-type.h>
-+
-+static __initdata efi_guid_t efi_cert_x509_guid = EFI_CERT_X509_GUID;
-+
-+/**
-+ * parse_efi_signature_list - Parse an EFI signature list for certificates
-+ * @data: The data blob to parse
-+ * @size: The size of the data blob
-+ * @keyring: The keyring to add extracted keys to
-+ */
-+int __init parse_efi_signature_list(const void *data, size_t size, struct key *keyring)
-+{
-+	unsigned offs = 0;
-+	size_t lsize, esize, hsize, elsize;
-+
-+	pr_devel("-->%s(,%zu)\n", __func__, size);
-+
-+	while (size > 0) {
-+		efi_signature_list_t list;
-+		const efi_signature_data_t *elem;
-+		key_ref_t key;
-+
-+		if (size < sizeof(list))
-+			return -EBADMSG;
-+
-+		memcpy(&list, data, sizeof(list));
-+		pr_devel("LIST[%04x] guid=%pUl ls=%x hs=%x ss=%x\n",
-+			 offs,
-+			 list.signature_type.b, list.signature_list_size,
-+			 list.signature_header_size, list.signature_size);
-+
-+		lsize = list.signature_list_size;
-+		hsize = list.signature_header_size;
-+		esize = list.signature_size;
-+		elsize = lsize - sizeof(list) - hsize;
-+
-+		if (lsize > size) {
-+			pr_devel("<--%s() = -EBADMSG [overrun @%x]\n",
-+				 __func__, offs);
-+			return -EBADMSG;
-+		}
-+		if (lsize < sizeof(list) ||
-+		    lsize - sizeof(list) < hsize ||
-+		    esize < sizeof(*elem) ||
-+		    elsize < esize ||
-+		    elsize % esize != 0) {
-+			pr_devel("- bad size combo @%x\n", offs);
-+			return -EBADMSG;
-+		}
-+
-+		if (efi_guidcmp(list.signature_type, efi_cert_x509_guid) != 0) {
-+			data += lsize;
-+			size -= lsize;
-+			offs += lsize;
-+			continue;
-+		}
-+
-+		data += sizeof(list) + hsize;
-+		size -= sizeof(list) + hsize;
-+		offs += sizeof(list) + hsize;
-+
-+		for (; elsize > 0; elsize -= esize) {
-+			elem = data;
-+
-+			pr_devel("ELEM[%04x]\n", offs);
-+
-+			key = key_create_or_update(
-+				make_key_ref(keyring, 1),
-+				"asymmetric",
-+				NULL,
-+				&elem->signature_data,
-+				esize - sizeof(*elem),
-+				(KEY_POS_ALL & ~KEY_POS_SETATTR) |
-+				KEY_USR_VIEW,
-+				KEY_ALLOC_NOT_IN_QUOTA |
-+				KEY_ALLOC_TRUSTED);
-+
-+			if (IS_ERR(key))
-+				pr_err("Problem loading in-kernel X.509 certificate (%ld)\n",
-+				       PTR_ERR(key));
-+			else
-+				pr_notice("Loaded cert '%s' linked to '%s'\n",
-+					  key_ref_to_ptr(key)->description,
-+					  keyring->description);
-+
-+			data += esize;
-+			size -= esize;
-+			offs += esize;
-+		}
-+	}
-+
-+	return 0;
-+}
-diff --git a/include/linux/efi.h b/include/linux/efi.h
-index fac43c611614..414c3c3d988d 100644
---- a/include/linux/efi.h
-+++ b/include/linux/efi.h
-@@ -941,6 +941,10 @@ extern bool efi_poweroff_required(void);
- char * __init efi_md_typeattr_format(char *buf, size_t size,
- 				     const efi_memory_desc_t *md);
- 
-+struct key;
-+extern int __init parse_efi_signature_list(const void *data, size_t size,
-+					   struct key *keyring);
-+
- /**
-  * efi_range_is_wc - check the WC bit on an address range
-  * @start: starting kvirt address
--- 
-2.4.3
-

Add-option-to-automatically-enforce-module-signature.patch

@@ -1,186 +0,0 @@
-From 37431394b3eeb1ef6d38d0e6b2693210606c2c2c Mon Sep 17 00:00:00 2001
-From: Matthew Garrett <matthew.garrett@nebula.com>
-Date: Fri, 9 Aug 2013 18:36:30 -0400
-Subject: [PATCH 10/20] Add option to automatically enforce module signatures
- when in Secure Boot mode
-
-UEFI Secure Boot provides a mechanism for ensuring that the firmware will
-only load signed bootloaders and kernels. Certain use cases may also
-require that all kernel modules also be signed. Add a configuration option
-that enforces this automatically when enabled.
-
-Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
----
- Documentation/x86/zero-page.txt       |  2 ++
- arch/x86/Kconfig                      | 10 ++++++++++
- arch/x86/boot/compressed/eboot.c      | 36 +++++++++++++++++++++++++++++++++++
- arch/x86/include/uapi/asm/bootparam.h |  3 ++-
- arch/x86/kernel/setup.c               |  6 ++++++
- include/linux/module.h                |  6 ++++++
- kernel/module.c                       |  7 +++++++
- 7 files changed, 69 insertions(+), 1 deletion(-)
-
-diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
-index 95a4d34af3fd..b8527c6b7646 100644
---- a/Documentation/x86/zero-page.txt
-+++ b/Documentation/x86/zero-page.txt
-@@ -31,6 +31,8 @@ Offset	Proto	Name		Meaning
- 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
- 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
- 				(below)
-+1EB/001	ALL     kbd_status      Numlock is enabled
-+1EC/001	ALL     secure_boot	Secure boot is enabled in the firmware
- 1EF/001	ALL	sentinel	Used to detect broken bootloaders
- 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
- 2D0/A00	ALL	e820_map	E820 memory map table
-diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
-index cc0d73eac047..14db458f4774 100644
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -1734,6 +1734,16 @@ config EFI_MIXED
- 
- 	   If unsure, say N.
- 
-+config EFI_SECURE_BOOT_SIG_ENFORCE
-+        def_bool n
-+	prompt "Force module signing when UEFI Secure Boot is enabled"
-+	---help---
-+	  UEFI Secure Boot provides a mechanism for ensuring that the
-+	  firmware will only load signed bootloaders and kernels. Certain
-+	  use cases may also require that all kernel modules also be signed.
-+	  Say Y here to automatically enable module signature enforcement
-+	  when a system boots with UEFI Secure Boot enabled.
-+
- config SECCOMP
- 	def_bool y
- 	prompt "Enable seccomp to safely compute untrusted bytecode"
-diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
-index ee1b6d346b98..b4de3faa3f29 100644
---- a/arch/x86/boot/compressed/eboot.c
-+++ b/arch/x86/boot/compressed/eboot.c
-@@ -12,6 +12,7 @@
- #include <asm/efi.h>
- #include <asm/setup.h>
- #include <asm/desc.h>
-+#include <asm/bootparam_utils.h>
- 
- #include "../string.h"
- #include "eboot.h"
-@@ -827,6 +828,37 @@ out:
- 	return status;
- }
- 
-+static int get_secure_boot(void)
-+{
-+	u8 sb, setup;
-+	unsigned long datasize = sizeof(sb);
-+	efi_guid_t var_guid = EFI_GLOBAL_VARIABLE_GUID;
-+	efi_status_t status;
-+
-+	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
-+				L"SecureBoot", &var_guid, NULL, &datasize, &sb);
-+
-+	if (status != EFI_SUCCESS)
-+		return 0;
-+
-+	if (sb == 0)
-+		return 0;
-+
-+
-+	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
-+				L"SetupMode", &var_guid, NULL, &datasize,
-+				&setup);
-+
-+	if (status != EFI_SUCCESS)
-+		return 0;
-+
-+	if (setup == 1)
-+		return 0;
-+
-+	return 1;
-+}
-+
-+
- /*
-  * See if we have Graphics Output Protocol
-  */
-@@ -1412,6 +1444,10 @@ struct boot_params *efi_main(struct efi_config *c,
- 	else
- 		setup_boot_services32(efi_early);
- 
-+	sanitize_boot_params(boot_params);
-+
-+	boot_params->secure_boot = get_secure_boot();
-+
- 	setup_graphics(boot_params);
- 
- 	setup_efi_pci(boot_params);
-diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
-index 329254373479..b61f8533c0fd 100644
---- a/arch/x86/include/uapi/asm/bootparam.h
-+++ b/arch/x86/include/uapi/asm/bootparam.h
-@@ -134,7 +134,8 @@ struct boot_params {
- 	__u8  eddbuf_entries;				/* 0x1e9 */
- 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
- 	__u8  kbd_status;				/* 0x1eb */
--	__u8  _pad5[3];					/* 0x1ec */
-+	__u8  secure_boot;				/* 0x1ec */
-+	__u8  _pad5[2];					/* 0x1ed */
- 	/*
- 	 * The sentinel is set to a nonzero value (0xff) in header.S.
- 	 *
-diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
-index baadbf90a7c5..1ac118146e90 100644
---- a/arch/x86/kernel/setup.c
-+++ b/arch/x86/kernel/setup.c
-@@ -1135,6 +1135,12 @@ void __init setup_arch(char **cmdline_p)
- 
- 	io_delay_init();
- 
-+#ifdef CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE
-+	if (boot_params.secure_boot) {
-+		enforce_signed_modules();
-+	}
-+#endif
-+
- 	/*
- 	 * Parse the ACPI tables for possible boot-time SMP configuration.
- 	 */
-diff --git a/include/linux/module.h b/include/linux/module.h
-index db386349cd01..4b8df91f03cd 100644
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -273,6 +273,12 @@ const struct exception_table_entry *search_exception_tables(unsigned long add);
- 
- struct notifier_block;
- 
-+#ifdef CONFIG_MODULE_SIG
-+extern void enforce_signed_modules(void);
-+#else
-+static inline void enforce_signed_modules(void) {};
-+#endif
-+
- #ifdef CONFIG_MODULES
- 
- extern int modules_disabled; /* for sysctl */
-diff --git a/kernel/module.c b/kernel/module.c
-index 7f045246e123..2b403ab0ef29 100644
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -4088,6 +4088,13 @@ void module_layout(struct module *mod,
- EXPORT_SYMBOL(module_layout);
- #endif
- 
-+#ifdef CONFIG_MODULE_SIG
-+void enforce_signed_modules(void)
-+{
-+	sig_enforce = true;
-+}
-+#endif
-+
- bool secure_modules(void)
- {
- #ifdef CONFIG_MODULE_SIG
--- 
-2.4.3
-

Add-secure_modules-call.patch

@@ -1,63 +0,0 @@
-From a1aaf20cffb1a949c5d6b1198690c7c30cfda4d5 Mon Sep 17 00:00:00 2001
-From: Matthew Garrett <matthew.garrett@nebula.com>
-Date: Fri, 9 Aug 2013 17:58:15 -0400
-Subject: [PATCH 01/20] Add secure_modules() call
-
-Provide a single call to allow kernel code to determine whether the system
-has been configured to either disable module loading entirely or to load
-only modules signed with a trusted key.
-
-Bugzilla: N/A
-Upstream-status: Fedora mustard.  Replaced by securelevels, but that was nak'd
-
-Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
----
- include/linux/module.h |  6 ++++++
- kernel/module.c        | 10 ++++++++++
- 2 files changed, 16 insertions(+)
-
-diff --git a/include/linux/module.h b/include/linux/module.h
-index 3a19c79918e0..db386349cd01 100644
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -635,6 +635,8 @@ static inline bool module_requested_async_probing(struct module *module)
- 	return module && module->async_probe_requested;
- }
- 
-+extern bool secure_modules(void);
-+
- #else /* !CONFIG_MODULES... */
- 
- /* Given an address, look for it in the exception tables. */
-@@ -751,6 +753,10 @@ static inline bool module_requested_async_probing(struct module *module)
- 	return false;
- }
- 
-+static inline bool secure_modules(void)
-+{
-+	return false;
-+}
- #endif /* CONFIG_MODULES */
- 
- #ifdef CONFIG_SYSFS
-diff --git a/kernel/module.c b/kernel/module.c
-index b86b7bf1be38..7f045246e123 100644
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -4087,3 +4087,13 @@ void module_layout(struct module *mod,
- }
- EXPORT_SYMBOL(module_layout);
- #endif
-+
-+bool secure_modules(void)
-+{
-+#ifdef CONFIG_MODULE_SIG
-+	return (sig_enforce || modules_disabled);
-+#else
-+	return modules_disabled;
-+#endif
-+}
-+EXPORT_SYMBOL(secure_modules);
--- 
-2.4.3
-

Add-sysrq-option-to-disable-secure-boot-mode.patch

@@ -1,246 +0,0 @@
-From 16d2ba5d5bc46e67e6aa7a3d113fbcc18c217388 Mon Sep 17 00:00:00 2001
-From: Kyle McMartin <kyle@redhat.com>
-Date: Fri, 30 Aug 2013 09:28:51 -0400
-Subject: [PATCH 20/20] Add sysrq option to disable secure boot mode
-
-Bugzilla: N/A
-Upstream-status: Fedora mustard
----
- arch/x86/kernel/setup.c     | 36 ++++++++++++++++++++++++++++++++++++
- drivers/input/misc/uinput.c |  1 +
- drivers/tty/sysrq.c         | 19 +++++++++++++------
- include/linux/input.h       |  5 +++++
- include/linux/sysrq.h       |  8 +++++++-
- kernel/debug/kdb/kdb_main.c |  2 +-
- kernel/module.c             |  2 +-
- 7 files changed, 64 insertions(+), 9 deletions(-)
-
-diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
-index f93826b8522c..41679b1aca83 100644
---- a/arch/x86/kernel/setup.c
-+++ b/arch/x86/kernel/setup.c
-@@ -70,6 +70,11 @@
- #include <linux/tboot.h>
- #include <linux/jiffies.h>
- 
-+#include <linux/fips.h>
-+#include <linux/cred.h>
-+#include <linux/sysrq.h>
-+#include <linux/init_task.h>
-+
- #include <video/edid.h>
- 
- #include <asm/mtrr.h>
-@@ -1261,6 +1266,37 @@ void __init i386_reserve_resources(void)
- 
- #endif /* CONFIG_X86_32 */
- 
-+#ifdef CONFIG_MAGIC_SYSRQ
-+#ifdef CONFIG_MODULE_SIG
-+extern bool sig_enforce;
-+#endif
-+
-+static void sysrq_handle_secure_boot(int key)
-+{
-+	if (!efi_enabled(EFI_SECURE_BOOT))
-+		return;
-+
-+	pr_info("Secure boot disabled\n");
-+#ifdef CONFIG_MODULE_SIG
-+	sig_enforce = fips_enabled;
-+#endif
-+}
-+static struct sysrq_key_op secure_boot_sysrq_op = {
-+	.handler	=	sysrq_handle_secure_boot,
-+	.help_msg	=	"unSB(x)",
-+	.action_msg	=	"Disabling Secure Boot restrictions",
-+	.enable_mask	=	SYSRQ_DISABLE_USERSPACE,
-+};
-+static int __init secure_boot_sysrq(void)
-+{
-+	if (efi_enabled(EFI_SECURE_BOOT))
-+		register_sysrq_key('x', &secure_boot_sysrq_op);
-+	return 0;
-+}
-+late_initcall(secure_boot_sysrq);
-+#endif /*CONFIG_MAGIC_SYSRQ*/
-+
-+
- static struct notifier_block kernel_offset_notifier = {
- 	.notifier_call = dump_kernel_offset
- };
-diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
-index 345df9b03aed..dea6a6c4a39b 100644
---- a/drivers/input/misc/uinput.c
-+++ b/drivers/input/misc/uinput.c
-@@ -364,6 +364,7 @@ static int uinput_allocate_device(struct uinput_device *udev)
- 	if (!udev->dev)
- 		return -ENOMEM;
- 
-+	udev->dev->flags |= INPUTDEV_FLAGS_SYNTHETIC;
- 	udev->dev->event = uinput_dev_event;
- 	input_set_drvdata(udev->dev, udev);
- 
-diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
-index 95b330a9ea98..dfa3e154a719 100644
---- a/drivers/tty/sysrq.c
-+++ b/drivers/tty/sysrq.c
-@@ -472,6 +472,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
- 	/* x: May be registered on mips for TLB dump */
- 	/* x: May be registered on ppc/powerpc for xmon */
- 	/* x: May be registered on sparc64 for global PMU dump */
-+	/* x: May be registered on x86_64 for disabling secure boot */
- 	NULL,				/* x */
- 	/* y: May be registered on sparc64 for global register dump */
- 	NULL,				/* y */
-@@ -515,7 +516,7 @@ static void __sysrq_put_key_op(int key, struct sysrq_key_op *op_p)
-                 sysrq_key_table[i] = op_p;
- }
- 
--void __handle_sysrq(int key, bool check_mask)
-+void __handle_sysrq(int key, int from)
- {
- 	struct sysrq_key_op *op_p;
- 	int orig_log_level;
-@@ -535,11 +536,15 @@ void __handle_sysrq(int key, bool check_mask)
- 
-         op_p = __sysrq_get_key_op(key);
-         if (op_p) {
-+		/* Ban synthetic events from some sysrq functionality */
-+		if ((from == SYSRQ_FROM_PROC || from == SYSRQ_FROM_SYNTHETIC) &&
-+		    op_p->enable_mask & SYSRQ_DISABLE_USERSPACE)
-+			printk("This sysrq operation is disabled from userspace.\n");
- 		/*
- 		 * Should we check for enabled operations (/proc/sysrq-trigger
- 		 * should not) and is the invoked operation enabled?
- 		 */
--		if (!check_mask || sysrq_on_mask(op_p->enable_mask)) {
-+		if (from == SYSRQ_FROM_KERNEL || sysrq_on_mask(op_p->enable_mask)) {
- 			pr_cont("%s\n", op_p->action_msg);
- 			console_loglevel = orig_log_level;
- 			op_p->handler(key);
-@@ -571,7 +576,7 @@ void __handle_sysrq(int key, bool check_mask)
- void handle_sysrq(int key)
- {
- 	if (sysrq_on())
--		__handle_sysrq(key, true);
-+		__handle_sysrq(key, SYSRQ_FROM_KERNEL);
- }
- EXPORT_SYMBOL(handle_sysrq);
- 
-@@ -652,7 +657,7 @@ static void sysrq_do_reset(unsigned long _state)
- static void sysrq_handle_reset_request(struct sysrq_state *state)
- {
- 	if (state->reset_requested)
--		__handle_sysrq(sysrq_xlate[KEY_B], false);
-+		__handle_sysrq(sysrq_xlate[KEY_B], SYSRQ_FROM_KERNEL);
- 
- 	if (sysrq_reset_downtime_ms)
- 		mod_timer(&state->keyreset_timer,
-@@ -803,8 +808,10 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq,
- 
- 	default:
- 		if (sysrq->active && value && value != 2) {
-+			int from = sysrq->handle.dev->flags & INPUTDEV_FLAGS_SYNTHETIC ?
-+					SYSRQ_FROM_SYNTHETIC : 0;
- 			sysrq->need_reinject = false;
--			__handle_sysrq(sysrq_xlate[code], true);
-+			__handle_sysrq(sysrq_xlate[code], from);
- 		}
- 		break;
- 	}
-@@ -1084,7 +1091,7 @@ static ssize_t write_sysrq_trigger(struct file *file, const char __user *buf,
- 
- 		if (get_user(c, buf))
- 			return -EFAULT;
--		__handle_sysrq(c, false);
-+		__handle_sysrq(c, SYSRQ_FROM_PROC);
- 	}
- 
- 	return count;
-diff --git a/include/linux/input.h b/include/linux/input.h
-index 82ce323b9986..9e534f228945 100644
---- a/include/linux/input.h
-+++ b/include/linux/input.h
-@@ -42,6 +42,7 @@ struct input_value {
-  * @phys: physical path to the device in the system hierarchy
-  * @uniq: unique identification code for the device (if device has it)
-  * @id: id of the device (struct input_id)
-+ * @flags: input device flags (SYNTHETIC, etc.)
-  * @propbit: bitmap of device properties and quirks
-  * @evbit: bitmap of types of events supported by the device (EV_KEY,
-  *	EV_REL, etc.)
-@@ -124,6 +125,8 @@ struct input_dev {
- 	const char *uniq;
- 	struct input_id id;
- 
-+	unsigned int flags;
-+
- 	unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];
- 
- 	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
-@@ -190,6 +193,8 @@ struct input_dev {
- };
- #define to_input_dev(d) container_of(d, struct input_dev, dev)
- 
-+#define	INPUTDEV_FLAGS_SYNTHETIC	0x000000001
-+
- /*
-  * Verify that we are in sync with input_device_id mod_devicetable.h #defines
-  */
-diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
-index 387fa7d05c98..4b07e30b3279 100644
---- a/include/linux/sysrq.h
-+++ b/include/linux/sysrq.h
-@@ -28,6 +28,8 @@
- #define SYSRQ_ENABLE_BOOT	0x0080
- #define SYSRQ_ENABLE_RTNICE	0x0100
- 
-+#define SYSRQ_DISABLE_USERSPACE	0x00010000
-+
- struct sysrq_key_op {
- 	void (*handler)(int);
- 	char *help_msg;
-@@ -42,8 +44,12 @@ struct sysrq_key_op {
-  * are available -- else NULL's).
-  */
- 
-+#define SYSRQ_FROM_KERNEL	0x0001
-+#define SYSRQ_FROM_PROC		0x0002
-+#define SYSRQ_FROM_SYNTHETIC	0x0004
-+
- void handle_sysrq(int key);
--void __handle_sysrq(int key, bool check_mask);
-+void __handle_sysrq(int key, int from);
- int register_sysrq_key(int key, struct sysrq_key_op *op);
- int unregister_sysrq_key(int key, struct sysrq_key_op *op);
- struct sysrq_key_op *__sysrq_get_key_op(int key);
-diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
-index 4121345498e0..0ff3cef5df96 100644
---- a/kernel/debug/kdb/kdb_main.c
-+++ b/kernel/debug/kdb/kdb_main.c
-@@ -1968,7 +1968,7 @@ static int kdb_sr(int argc, const char **argv)
- 		return KDB_ARGCOUNT;
- 
- 	kdb_trap_printk++;
--	__handle_sysrq(*argv[1], check_mask);
-+	__handle_sysrq(*argv[1], check_mask & SYSRQ_FROM_KERNEL);
- 	kdb_trap_printk--;
- 
- 	return 0;
-diff --git a/kernel/module.c b/kernel/module.c
-index 2b403ab0ef29..7818c110e95c 100644
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -292,7 +292,7 @@ static void module_assert_mutex_or_preempt(void)
- #endif
- }
- 
--static bool sig_enforce = IS_ENABLED(CONFIG_MODULE_SIG_FORCE);
-+bool sig_enforce = IS_ENABLED(CONFIG_MODULE_SIG_FORCE);
- #ifndef CONFIG_MODULE_SIG_FORCE
- module_param(sig_enforce, bool_enable_only, 0644);
- #endif /* !CONFIG_MODULE_SIG_FORCE */
--- 
-2.4.3
-

HID-sony-do-not-bail-out-when-the-sixaxis-refuses-th.patch

@@ -1,49 +0,0 @@
-From 954d6154959c8c196fa4b89fc98a4fb377c6a38d Mon Sep 17 00:00:00 2001
-From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-Date: Fri, 8 Jan 2016 17:58:49 +0100
-Subject: [PATCH] HID: sony: do not bail out when the sixaxis refuses the
- output report
-
-When setting the operational mode, some third party (Speedlink Strike-FX)
-gamepads refuse the output report. Failing here means we refuse to
-initialize the gamepad while this should be harmless.
-
-The weird part is that the initial commit that added this: a7de9b8
-("HID: sony: Enable Gasia third-party PS3 controllers") mentions this
-very same controller as one requiring this output report.
-Anyway, it's broken for one user at least, so let's change it.
-We will report an error, but at least the controller should work.
-
-And no, these devices present themselves as legacy Sony controllers
-(VID:PID of 054C:0268, as in the official ones) so there are no ways
-of discriminating them from the official ones.
-
-https://bugzilla.redhat.com/show_bug.cgi?id=1255325
-
-Reported-and-tested-by: Max Fedotov <thesourcehim@gmail.com>
-Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-Signed-off-by: Jiri Kosina <jkosina@suse.cz>
----
- drivers/hid/hid-sony.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
-index 661f94f8ab8b..11f91c0c2458 100644
---- a/drivers/hid/hid-sony.c
-+++ b/drivers/hid/hid-sony.c
-@@ -1411,8 +1411,10 @@ static int sixaxis_set_operational_usb(struct hid_device *hdev)
- 	}
- 
- 	ret = hid_hw_output_report(hdev, buf, 1);
--	if (ret < 0)
--		hid_err(hdev, "can't set operational mode: step 3\n");
-+	if (ret < 0) {
-+		hid_info(hdev, "can't set operational mode: step 3, ignoring\n");
-+		ret = 0;
-+	}
- 
- out:
- 	kfree(buf);
--- 
-2.5.0
-

Input-synaptics-pin-3-touches-when-the-firmware-repo.patch

@@ -1,47 +0,0 @@
-From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-Date: Thu, 16 Apr 2015 13:01:46 -0400
-Subject: [PATCH] Input - synaptics: pin 3 touches when the firmware reports 3
- fingers
-
-Synaptics PS/2 touchpad can send only 2 touches in a report. They can
-detect 4 or 5 and this information is valuable.
-
-In commit 63c4fda (Input: synaptics - allocate 3 slots to keep stability
-in image sensors), we allocate 3 slots, but we still continue to report
-the 2 available fingers. That means that the client sees 2 used slots while
-there is a total of 3 fingers advertised by BTN_TOOL_TRIPLETAP.
-
-For old kernels this is not a problem because max_slots was 2 and libinput/
-xorg-synaptics knew how to deal with that. Now that max_slot is 3, the
-clients ignore BTN_TOOL_TRIPLETAP and count the actual used slots (so 2).
-It then gets confused when receiving the BTN_TOOL_TRIPLETAP and DOUBLETAP
-information, and goes wild.
-
-We can pin the 3 slots until we get a total number of fingers below 2.
-
-Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1212230
-
-Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
----
- drivers/input/mouse/synaptics.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
-index 3a32caf06bf1..58102970f94f 100644
---- a/drivers/input/mouse/synaptics.c
-+++ b/drivers/input/mouse/synaptics.c
-@@ -940,6 +940,14 @@ static void synaptics_report_mt_data(struct psmouse *psmouse,
- 		input_report_abs(dev, ABS_MT_PRESSURE, hw[i]->z);
- 	}
- 
-+	/* keep (slot count <= num_fingers) by pinning all slots */
-+	if (num_fingers >= 3) {
-+		for (i = 0; i < 3; i++) {
-+			input_mt_slot(dev, i);
-+			input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
-+		}
-+	}
-+
- 	input_mt_drop_unused(dev);
- 
- 	/* Don't use active slot count to generate BTN_TOOL events. */

KEYS-Add-a-system-blacklist-keyring.patch

@@ -1,107 +0,0 @@
-From f630ce576114bfede02d8a0bafa97e4d6f978a74 Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Fri, 26 Oct 2012 12:36:24 -0400
-Subject: [PATCH 17/20] KEYS: Add a system blacklist keyring
-
-This adds an additional keyring that is used to store certificates that
-are blacklisted.  This keyring is searched first when loading signed modules
-and if the module's certificate is found, it will refuse to load.  This is
-useful in cases where third party certificates are used for module signing.
-
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- certs/system_keyring.c        | 27 +++++++++++++++++++++++++++
- include/keys/system_keyring.h |  4 ++++
- init/Kconfig                  |  9 +++++++++
- 3 files changed, 40 insertions(+)
-
-diff --git a/certs/system_keyring.c b/certs/system_keyring.c
-index 2570598b784d..53733822993f 100644
---- a/certs/system_keyring.c
-+++ b/certs/system_keyring.c
-@@ -20,6 +20,9 @@
- 
- struct key *system_trusted_keyring;
- EXPORT_SYMBOL_GPL(system_trusted_keyring);
-+#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
-+struct key *system_blacklist_keyring;
-+#endif
- 
- extern __initconst const u8 system_certificate_list[];
- extern __initconst const unsigned long system_certificate_list_size;
-@@ -41,6 +44,20 @@ static __init int system_trusted_keyring_init(void)
- 		panic("Can't allocate system trusted keyring\n");
- 
- 	set_bit(KEY_FLAG_TRUSTED_ONLY, &system_trusted_keyring->flags);
-+
-+	#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
-+	system_blacklist_keyring = keyring_alloc(".system_blacklist_keyring",
-+				    KUIDT_INIT(0), KGIDT_INIT(0),
-+				    current_cred(),
-+				    (KEY_POS_ALL & ~KEY_POS_SETATTR) |
-+				    KEY_USR_VIEW | KEY_USR_READ,
-+				    KEY_ALLOC_NOT_IN_QUOTA, NULL);
-+	if (IS_ERR(system_blacklist_keyring))
-+		panic("Can't allocate system blacklist keyring\n");
-+
-+	set_bit(KEY_FLAG_TRUSTED_ONLY, &system_blacklist_keyring->flags);
-+#endif
-+
- 	return 0;
- }
- 
-@@ -138,6 +155,16 @@ int system_verify_data(const void *data, unsigned long len,
- 	if (ret < 0)
- 		goto error;
- 
-+#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
-+	ret = pkcs7_validate_trust(pkcs7, system_blacklist_keyring, &trusted);
-+	if (!ret) {
-+		/* module is signed with a cert in the blacklist.  reject */
-+		pr_err("Module key is in the blacklist\n");
-+		ret = -EKEYREJECTED;
-+		goto error;
-+	}
-+#endif
-+
- 	ret = pkcs7_validate_trust(pkcs7, system_trusted_keyring, &trusted);
- 	if (ret < 0)
- 		goto error;
-diff --git a/include/keys/system_keyring.h b/include/keys/system_keyring.h
-index b20cd885c1fd..51d8ddc60e0f 100644
---- a/include/keys/system_keyring.h
-+++ b/include/keys/system_keyring.h
-@@ -35,6 +35,10 @@ extern int system_verify_data(const void *data, unsigned long len,
- 			      enum key_being_used_for usage);
- #endif
- 
-+#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
-+extern struct key *system_blacklist_keyring;
-+#endif
-+
- #ifdef CONFIG_IMA_MOK_KEYRING
- extern struct key *ima_mok_keyring;
- extern struct key *ima_blacklist_keyring;
-diff --git a/init/Kconfig b/init/Kconfig
-index 02da9f1fd9df..782d26f02885 100644
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1783,6 +1783,15 @@ config SYSTEM_DATA_VERIFICATION
- 	  module verification, kexec image verification and firmware blob
- 	  verification.
- 
-+config SYSTEM_BLACKLIST_KEYRING
-+	bool "Provide system-wide ring of blacklisted keys"
-+	depends on KEYS
-+	help
-+	  Provide a system keyring to which blacklisted keys can be added.
-+	  Keys in the keyring are considered entirely untrusted.  Keys in this
-+	  keyring are used by the module signature checking to reject loading
-+	  of modules signed with a blacklisted key.
-+
- config PROFILING
- 	bool "Profiling support"
- 	help
--- 
-2.4.3
-

Kbuild-Add-an-option-to-enable-GCC-VTA.patch

@@ -1,89 +0,0 @@
-From: Josh Stone <jistone@redhat.com>
-Date: Fri, 21 Nov 2014 10:40:00 -0800
-Subject: [PATCH] Kbuild: Add an option to enable GCC VTA
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Due to recent codegen issues, gcc -fvar-tracking-assignments was
-unconditionally disabled in commit 2062afb4f804a ("Fix gcc-4.9.0
-miscompilation of load_balance() in scheduler").  However, this reduces
-the debuginfo coverage for variable locations, especially in inline
-functions.  VTA is certainly not perfect either in those cases, but it
-is much better than without.  With compiler versions that have fixed the
-codegen bugs, we would prefer to have the better details for SystemTap,
-and surely other debuginfo consumers like perf will benefit as well.
-
-This patch simply makes CONFIG_DEBUG_INFO_VTA an option.  I considered
-Frank and Linus's discussion of a cc-option-like -fcompare-debug test,
-but I'm convinced that a narrow test of an arch-specific codegen issue
-is not really useful.  GCC has their own regression tests for this, so
-I'd suggest GCC_COMPARE_DEBUG=-fvar-tracking-assignments-toggle is more
-useful for kernel developers to test confidence.
-
-In fact, I ran into a couple more issues when testing for this patch[1],
-although neither of those had any codegen impact.
- [1] https://bugzilla.redhat.com/show_bug.cgi?id=1140872
-
-With gcc-4.9.2-1.fc22, I can now build v3.18-rc5 with Fedora's i686 and
-x86_64 configs, and this is completely clean with GCC_COMPARE_DEBUG.
-
-Cc: Frank Ch. Eigler <fche@redhat.com>
-Cc: Jakub Jelinek <jakub@redhat.com>
-Cc: Josh Boyer <jwboyer@fedoraproject.org>
-Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Cc: Linus Torvalds <torvalds@linux-foundation.org>
-Cc: Andrew Morton <akpm@linux-foundation.org>
-Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
-Cc: Michel Dänzer <michel@daenzer.net>
-Signed-off-by: Josh Stone <jistone@redhat.com>
----
- Makefile          |  4 ++++
- lib/Kconfig.debug | 18 +++++++++++++++++-
- 2 files changed, 21 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 257ef5892ab7..3cc6f4477e78 100644
---- a/Makefile
-+++ b/Makefile
-@@ -701,7 +701,11 @@ KBUILD_CFLAGS	+= -fomit-frame-pointer
- endif
- endif
- 
-+ifdef CONFIG_DEBUG_INFO_VTA
-+KBUILD_CFLAGS   += $(call cc-option, -fvar-tracking-assignments)
-+else
- KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
-+endif
- 
- ifdef CONFIG_DEBUG_INFO
- ifdef CONFIG_DEBUG_INFO_SPLIT
-diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index e2894b23efb6..d98afe18f704 100644
---- a/lib/Kconfig.debug
-+++ b/lib/Kconfig.debug
-@@ -165,7 +165,23 @@ config DEBUG_INFO_DWARF4
- 	  Generate dwarf4 debug info. This requires recent versions
- 	  of gcc and gdb. It makes the debug information larger.
- 	  But it significantly improves the success of resolving
--	  variables in gdb on optimized code.
-+	  variables in gdb on optimized code.  The gcc docs also
-+	  recommend enabling -fvar-tracking-assignments for maximum
-+	  benefit. (see DEBUG_INFO_VTA)
-+
-+config DEBUG_INFO_VTA
-+	bool "Enable var-tracking-assignments for debuginfo"
-+	depends on DEBUG_INFO
-+	help
-+	  Enable gcc -fvar-tracking-assignments for improved debug
-+	  information on variable locations in optimized code.  Per
-+	  gcc, DEBUG_INFO_DWARF4 is recommended for best use of VTA.
-+
-+	  VTA has been implicated in codegen bugs (gcc PR61801,
-+	  PR61904), so this may deserve some caution.  One can set
-+	  GCC_COMPARE_DEBUG=-fvar-tracking-assignments-toggle in the
-+	  environment to automatically compile everything both ways,
-+	  generating an error if anything differs.
- 
- config GDB_SCRIPTS
- 	bool "Provide GDB scripts for kernel debugging"

MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch

@@ -1,186 +0,0 @@
-From 2246a781c8dbb1207a0b0abbfae201f998c3954b Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Fri, 26 Oct 2012 12:42:16 -0400
-Subject: [PATCH] MODSIGN: Import certificates from UEFI Secure Boot
-
-Secure Boot stores a list of allowed certificates in the 'db' variable.
-This imports those certificates into the system trusted keyring.  This
-allows for a third party signing certificate to be used in conjunction
-with signed modules.  By importing the public certificate into the 'db'
-variable, a user can allow a module signed with that certificate to
-load.  The shim UEFI bootloader has a similar certificate list stored
-in the 'MokListRT' variable.  We import those as well.
-
-In the opposite case, Secure Boot maintains a list of disallowed
-certificates in the 'dbx' variable.  We load those certificates into
-the newly introduced system blacklist keyring and forbid any module
-signed with those from loading.
-
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- include/linux/efi.h   |  6 ++++
- init/Kconfig          |  9 +++++
- kernel/Makefile       |  3 ++
- kernel/modsign_uefi.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 110 insertions(+)
- create mode 100644 kernel/modsign_uefi.c
-
-diff --git a/include/linux/efi.h b/include/linux/efi.h
-index 85ef051ac6fb..a042b2ece788 100644
---- a/include/linux/efi.h
-+++ b/include/linux/efi.h
-@@ -600,6 +600,12 @@ typedef struct {
- 	u64 table;
- } efi_config_table_64_t;
- 
-+#define EFI_IMAGE_SECURITY_DATABASE_GUID \
-+    EFI_GUID(  0xd719b2cb, 0x3d3a, 0x4596, 0xa3, 0xbc, 0xda, 0xd0, 0x0e, 0x67, 0x65, 0x6f )
-+
-+#define EFI_SHIM_LOCK_GUID \
-+    EFI_GUID(  0x605dab50, 0xe046, 0x4300, 0xab, 0xb6, 0x3d, 0xd8, 0x10, 0xdd, 0x8b, 0x23 )
-+
- typedef struct {
- 	efi_guid_t guid;
- 	u32 table;
-diff --git a/init/Kconfig b/init/Kconfig
-index 02da9f1fd9df..90c73a0564b1 100644
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1924,6 +1924,15 @@ config MODULE_SIG_ALL
- comment "Do not forget to sign required modules with scripts/sign-file"
- 	depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
- 
-+config MODULE_SIG_UEFI
-+	bool "Allow modules signed with certs stored in UEFI"
-+	depends on MODULE_SIG && SYSTEM_BLACKLIST_KEYRING && EFI
-+	select EFI_SIGNATURE_LIST_PARSER
-+	help
-+	  This will import certificates stored in UEFI and allow modules
-+	  signed with those to be loaded.  It will also disallow loading
-+	  of modules stored in the UEFI dbx variable.
-+
- choice
- 	prompt "Which hash algorithm should modules be signed with?"
- 	depends on MODULE_SIG
-diff --git a/kernel/Makefile b/kernel/Makefile
-index d4988410b410..55e886239e7e 100644
---- a/kernel/Makefile
-+++ b/kernel/Makefile
-@@ -47,6 +47,7 @@ endif
- obj-$(CONFIG_UID16) += uid16.o
- obj-$(CONFIG_MODULES) += module.o
- obj-$(CONFIG_MODULE_SIG) += module_signing.o
-+obj-$(CONFIG_MODULE_SIG_UEFI) += modsign_uefi.o
- obj-$(CONFIG_KALLSYMS) += kallsyms.o
- obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
- obj-$(CONFIG_KEXEC_CORE) += kexec_core.o
-@@ -103,6 +104,8 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o
- 
- obj-$(CONFIG_HAS_IOMEM) += memremap.o
- 
-+$(obj)/modsign_uefi.o: KBUILD_CFLAGS += -fshort-wchar
-+
- $(obj)/configs.o: $(obj)/config_data.h
- 
- # config_data.h contains the same information as ikconfig.h but gzipped.
-diff --git a/kernel/modsign_uefi.c b/kernel/modsign_uefi.c
-new file mode 100644
-index 000000000000..94b0eb38a284
---- /dev/null
-+++ b/kernel/modsign_uefi.c
-@@ -0,0 +1,92 @@
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/cred.h>
-+#include <linux/err.h>
-+#include <linux/efi.h>
-+#include <linux/slab.h>
-+#include <keys/asymmetric-type.h>
-+#include <keys/system_keyring.h>
-+#include "module-internal.h"
-+
-+static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, unsigned long *size)
-+{
-+	efi_status_t status;
-+	unsigned long lsize = 4;
-+	unsigned long tmpdb[4];
-+	void *db = NULL;
-+
-+	status = efi.get_variable(name, guid, NULL, &lsize, &tmpdb);
-+	if (status != EFI_BUFFER_TOO_SMALL) {
-+		pr_err("Couldn't get size: 0x%lx\n", status);
-+		return NULL;
-+	}
-+
-+	db = kmalloc(lsize, GFP_KERNEL);
-+	if (!db) {
-+		pr_err("Couldn't allocate memory for uefi cert list\n");
-+		goto out;
-+	}
-+
-+	status = efi.get_variable(name, guid, NULL, &lsize, db);
-+	if (status != EFI_SUCCESS) {
-+		kfree(db);
-+		db = NULL;
-+		pr_err("Error reading db var: 0x%lx\n", status);
-+	}
-+out:
-+	*size = lsize;
-+	return db;
-+}
-+
-+/*
-+ *  * Load the certs contained in the UEFI databases
-+ *   */
-+static int __init load_uefi_certs(void)
-+{
-+	efi_guid_t secure_var = EFI_IMAGE_SECURITY_DATABASE_GUID;
-+	efi_guid_t mok_var = EFI_SHIM_LOCK_GUID;
-+	void *db = NULL, *dbx = NULL, *mok = NULL;
-+	unsigned long dbsize = 0, dbxsize = 0, moksize = 0;
-+	int rc = 0;
-+
-+	/* Check if SB is enabled and just return if not */
-+	if (!efi_enabled(EFI_SECURE_BOOT))
-+		return 0;
-+
-+	/* Get db, MokListRT, and dbx.  They might not exist, so it isn't
-+	 * an error if we can't get them.
-+	 */
-+	db = get_cert_list(L"db", &secure_var, &dbsize);
-+	if (!db) {
-+		pr_err("MODSIGN: Couldn't get UEFI db list\n");
-+	} else {
-+		rc = parse_efi_signature_list(db, dbsize, system_trusted_keyring);
-+		if (rc)
-+			pr_err("Couldn't parse db signatures: %d\n", rc);
-+		kfree(db);
-+	}
-+
-+	mok = get_cert_list(L"MokListRT", &mok_var, &moksize);
-+	if (!mok) {
-+		pr_info("MODSIGN: Couldn't get UEFI MokListRT\n");
-+	} else {
-+		rc = parse_efi_signature_list(mok, moksize, system_trusted_keyring);
-+		if (rc)
-+			pr_err("Couldn't parse MokListRT signatures: %d\n", rc);
-+		kfree(mok);
-+	}
-+
-+	dbx = get_cert_list(L"dbx", &secure_var, &dbxsize);
-+	if (!dbx) {
-+		pr_info("MODSIGN: Couldn't get UEFI dbx list\n");
-+	} else {
-+		rc = parse_efi_signature_list(dbx, dbxsize,
-+			system_blacklist_keyring);
-+		if (rc)
-+			pr_err("Couldn't parse dbx signatures: %d\n", rc);
-+		kfree(dbx);
-+	}
-+
-+	return rc;
-+}
-+late_initcall(load_uefi_certs);
--- 
-2.4.3
-

MODSIGN-Support-not-importing-certs-from-db.patch

@@ -1,84 +0,0 @@
-From d7c9efa4ab647d6ccb617f2504e79a398d56f7d4 Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Thu, 3 Oct 2013 10:14:23 -0400
-Subject: [PATCH 19/20] MODSIGN: Support not importing certs from db
-
-If a user tells shim to not use the certs/hashes in the UEFI db variable
-for verification purposes, shim will set a UEFI variable called MokIgnoreDB.
-Have the uefi import code look for this and not import things from the db
-variable.
-
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- kernel/modsign_uefi.c | 40 +++++++++++++++++++++++++++++++---------
- 1 file changed, 31 insertions(+), 9 deletions(-)
-
-diff --git a/kernel/modsign_uefi.c b/kernel/modsign_uefi.c
-index 94b0eb38a284..ae28b974d49a 100644
---- a/kernel/modsign_uefi.c
-+++ b/kernel/modsign_uefi.c
-@@ -8,6 +8,23 @@
- #include <keys/system_keyring.h>
- #include "module-internal.h"
- 
-+static __init int check_ignore_db(void)
-+{
-+	efi_status_t status;
-+	unsigned int db = 0;
-+	unsigned long size = sizeof(db);
-+	efi_guid_t guid = EFI_SHIM_LOCK_GUID;
-+
-+	/* Check and see if the MokIgnoreDB variable exists.  If that fails
-+	 * then we don't ignore DB.  If it succeeds, we do.
-+	 */
-+	status = efi.get_variable(L"MokIgnoreDB", &guid, NULL, &size, &db);
-+	if (status != EFI_SUCCESS)
-+		return 0;
-+
-+	return 1;
-+}
-+
- static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, unsigned long *size)
- {
- 	efi_status_t status;
-@@ -47,23 +64,28 @@ static int __init load_uefi_certs(void)
- 	efi_guid_t mok_var = EFI_SHIM_LOCK_GUID;
- 	void *db = NULL, *dbx = NULL, *mok = NULL;
- 	unsigned long dbsize = 0, dbxsize = 0, moksize = 0;
--	int rc = 0;
-+	int ignore_db, rc = 0;
- 
- 	/* Check if SB is enabled and just return if not */
- 	if (!efi_enabled(EFI_SECURE_BOOT))
- 		return 0;
- 
-+	/* See if the user has setup Ignore DB mode */
-+	ignore_db = check_ignore_db();
-+
- 	/* Get db, MokListRT, and dbx.  They might not exist, so it isn't
- 	 * an error if we can't get them.
- 	 */
--	db = get_cert_list(L"db", &secure_var, &dbsize);
--	if (!db) {
--		pr_err("MODSIGN: Couldn't get UEFI db list\n");
--	} else {
--		rc = parse_efi_signature_list(db, dbsize, system_trusted_keyring);
--		if (rc)
--			pr_err("Couldn't parse db signatures: %d\n", rc);
--		kfree(db);
-+	if (!ignore_db) {
-+		db = get_cert_list(L"db", &secure_var, &dbsize);
-+		if (!db) {
-+			pr_err("MODSIGN: Couldn't get UEFI db list\n");
-+		} else {
-+			rc = parse_efi_signature_list(db, dbsize, system_trusted_keyring);
-+			if (rc)
-+				pr_err("Couldn't parse db signatures: %d\n", rc);
-+			kfree(db);
-+		}
- 	}
- 
- 	mok = get_cert_list(L"MokListRT", &mok_var, &moksize);
--- 
-2.4.3
-

Makefile

@@ -1,124 +0,0 @@
-# Makefile for source rpm: kernel
-SPECFILE := kernel.spec
-
-# we only check the .sign signatures
-UPSTREAM_CHECKS = sign
-
-.PHONY: help
-help:
-%:
-	@echo "Try fedpkg $@ or something like that"
-	@exit 1
-
-include Makefile.config
-
-prep:
-	fedpkg -v prep
-
-noarch:
-	fedpkg -v local --arch=noarch
-
-# 'make local' also needs to build the noarch firmware package
-local:
-	fedpkg -v local
-
-extremedebug:
-	@perl -pi -e 's/# CONFIG_DEBUG_PAGEALLOC is not set/CONFIG_DEBUG_PAGEALLOC=y/' config-nodebug
-
-debug:
-	@perl -pi -e 's/# CONFIG_LOCK_STAT is not set/CONFIG_LOCK_STAT=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_STACK_USAGE is not set/CONFIG_DEBUG_STACK_USAGE=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_SLAB is not set/CONFIG_DEBUG_SLAB=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_MUTEXES is not set/CONFIG_DEBUG_MUTEXES=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_RT_MUTEXES is not set/CONFIG_DEBUG_RT_MUTEXES=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_LOCK_ALLOC is not set/CONFIG_DEBUG_LOCK_ALLOC=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_LOCK_TORTURE_TEST is not set/CONFIG_LOCK_TORTURE_TEST=m/' config-nodebug
-	@perl -pi -e 's/# CONFIG_PROVE_LOCKING is not set/CONFIG_PROVE_LOCKING=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_PROVE_RCU is not set/CONFIG_PROVE_RCU=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_SPINLOCK is not set/CONFIG_DEBUG_SPINLOCK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_VM is not set/CONFIG_DEBUG_VM=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAULT_INJECTION is not set/CONFIG_FAULT_INJECTION=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAILSLAB is not set/CONFIG_FAILSLAB=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_PAGE_ALLOC is not set/CONFIG_FAIL_PAGE_ALLOC=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_IO_TIMEOUT is not set/CONFIG_FAIL_IO_TIMEOUT=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_MAKE_REQUEST is not set/CONFIG_FAIL_MAKE_REQUEST=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAIL_MMC_REQUEST is not set/CONFIG_FAIL_MMC_REQUEST=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/CONFIG_FAULT_INJECTION_DEBUG_FS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_PI_LIST is not set/CONFIG_DEBUG_PI_LIST=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS is not set/CONFIG_DEBUG_OBJECTS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_FREE is not set/CONFIG_DEBUG_OBJECTS_FREE=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/CONFIG_DEBUG_OBJECTS_TIMERS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_WORK is not set/CONFIG_DEBUG_OBJECTS_WORK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_X86_PTDUMP is not set/CONFIG_X86_PTDUMP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_ARM64_PTDUMP is not set/CONFIG_ARM64_PTDUMP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_EFI_PGT_DUMP is not set/CONFIG_EFI_PGT_DUMP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CAN_DEBUG_DEVICES is not set/CONFIG_CAN_DEBUG_DEVICES=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_MODULE_FORCE_UNLOAD is not set/CONFIG_MODULE_FORCE_UNLOAD=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_NOTIFIERS is not set/CONFIG_DEBUG_NOTIFIERS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DMA_API_DEBUG is not set/CONFIG_DMA_API_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic
-	@perl -pi -e 's/# CONFIG_PM_ADVANCED_DEBUG is not set/CONFIG_PM_ADVANCED_DEBUG=y/' config-generic
-	@perl -pi -e 's/# CONFIG_B43_DEBUG is not set/CONFIG_B43_DEBUG=y/' config-generic
-	@perl -pi -e 's/# CONFIG_B43LEGACY_DEBUG is not set/CONFIG_B43LEGACY_DEBUG=y/' config-generic
-	@perl -pi -e 's/# CONFIG_MMIOTRACE is not set/CONFIG_MMIOTRACE=y/' config-nodebug
-	@perl -pi -e 's/CONFIG_STRIP_ASM_SYMS=y/# CONFIG_STRIP_ASM_SYMS is not set/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_CREDENTIALS is not set/CONFIG_DEBUG_CREDENTIALS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_ACPI_DEBUG is not set/CONFIG_ACPI_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_EXT4_DEBUG is not set/CONFIG_EXT4_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/CONFIG_DEBUG_PERF_USE_VMALLOC=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_JBD2_DEBUG is not set/CONFIG_JBD2_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_NFSD_FAULT_INJECTION is not set/CONFIG_NFSD_FAULT_INJECTION=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_BLK_CGROUP is not set/CONFIG_DEBUG_BLK_CGROUP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DRBD_FAULT_INJECTION is not set/CONFIG_DRBD_FAULT_INJECTION=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_ATH_DEBUG is not set/CONFIG_ATH_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CARL9170_DEBUGFS is not set/CONFIG_CARL9170_DEBUGFS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/CONFIG_IWLWIFI_DEVICE_TRACING=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DMADEVICES_DEBUG is not set/CONFIG_DMADEVICES_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/CONFIG_CEPH_LIB_PRETTYDEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_QUOTA_DEBUG is not set/CONFIG_QUOTA_DEBUG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_KGDB_KDB is not set/CONFIG_KGDB_KDB=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_KDB_KEYBOARD is not set/CONFIG_KDB_KEYBOARD=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_PER_CPU_MAPS is not set/CONFIG_DEBUG_PER_CPU_MAPS=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_TEST_LIST_SORT is not set/CONFIG_TEST_LIST_SORT=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/CONFIG_DEBUG_ATOMIC_SLEEP=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DETECT_HUNG_TASK is not set/CONFIG_DETECT_HUNG_TASK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_WQ_WATCHDOG is not set/CONFIG_WQ_WATCHDOG=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_DEBUG_KMEMLEAK is not set/CONFIG_DEBUG_KMEMLEAK=y/' config-nodebug
-	@perl -pi -e 's/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/' config-nodebug
-
-	@# just in case we're going from extremedebug -> debug
-	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
-
-	@perl -pi -e 's/# CONFIG_MAXSMP is not set/CONFIG_MAXSMP=y/' config-x86-generic
-
-	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
-	@rpmdev-bumpspec -c "Reenable debugging options." kernel.spec
-
-nodebuginfo:
-	@perl -pi -e 's/^%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 1\}/%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 0\}/' kernel.spec
-nodebug: release
-	@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
-release: config-release
-	@perl -pi -e 's/^%define debugbuildsenabled 0/%define debugbuildsenabled 1/' kernel.spec
-	@rpmdev-bumpspec -c "Disable debugging options." kernel.spec
-
-include Makefile.release
-
-unused-kernel-patches:
-	@for f in *.patch; do if [ -e $$f ]; then (egrep -q "^Patch[[:digit:]]+:[[:space:]]+$$f" $(SPECFILE) || echo "Unused:    $$f") && egrep -q "^ApplyPatch[[:space:]]+$$f|^ApplyOptionalPatch[[:space:]]+$$f" $(SPECFILE) || echo "Unapplied: $$f"; fi; done
-
-ifeq ($(MAKECMDGOALS),me a sandwich)
-.PHONY: me a sandwich
-me a:
-	@:
-
-sandwich:
-	@[ `id -u` -ne 0 ] && echo "What? Make it yourself." || echo Okay.
-endif

Makefile.config

@@ -1,129 +0,0 @@
-# Make rules for configuration files.
-#
-# $Id$
-
-CFG		= kernel-$(VERSION)
-
-CONFIGFILES	= \
-	$(CFG)-i686.config $(CFG)-i686-debug.config \
-	$(CFG)-i686-PAE.config $(CFG)-i686-PAEdebug.config \
-	$(CFG)-x86_64.config $(CFG)-x86_64-debug.config \
-	$(CFG)-s390x.config \
-	$(CFG)-armv7hl.config $(CFG)-armv7hl-lpae.config \
-	$(CFG)-aarch64.config \
-	$(CFG)-ppc64.config $(CFG)-ppc64p7.config $(CFG)-ppc64-debug.config \
-	$(CFG)-ppc64le.config $(CFG)-ppc64le-debug.config
-
-PLATFORMS	= x86 x86_64 powerpc s390x arm arm64
-TEMPFILES	= $(addprefix temp-, $(addsuffix -generic, $(PLATFORMS)))
-
-configs: $(CONFIGFILES)
-	@rm -f kernel-*-config
-	@rm -f $(TEMPFILES)
-	@rm -f temp-generic temp-*-generic temp-*-generic-tmp
-
-# Augment the clean target to clean up our own cruft
-clean ::
-	@rm -fv $(CONFIGFILES) $(TEMPFILES) temp-generic kernel-$(VERSION)*config
-
-temp-generic: config-generic config-nodebug
-	cat $^ > temp-generic
-
-temp-debug-generic: config-generic config-debug
-	cat $^ > temp-debug-generic
-
-temp-no-extra-generic: config-no-extra temp-generic
-	perl merge.pl $^ > $@
-
-temp-arm-generic: config-arm-generic temp-no-extra-generic
-	perl merge.pl $^ > $@
-
-temp-armv7-generic: config-armv7-generic temp-arm-generic
-	perl merge.pl $^ > $@
-
-temp-armv7: config-armv7 temp-armv7-generic
-	perl merge.pl $^ > $@
-
-temp-armv7-lpae: config-armv7-lpae temp-armv7-generic
-	perl merge.pl $^ > $@
-
-temp-arm-debug-generic: temp-arm-generic temp-debug-generic
-	perl merge.pl $^ > $@
-
-temp-arm64: config-arm64 temp-arm-generic
-	perl merge.pl $^ > $@
-
-temp-arm64-debug: config-arm64 temp-arm-debug-generic
-	perl merge.pl $^ > $@
-
-temp-x86-32: config-x86-32-generic config-x86-generic
-	perl merge.pl $^  > $@
-
-temp-x86-32-generic: temp-x86-32 temp-generic
-	perl merge.pl $^  > $@
-
-temp-x86-debug-generic: temp-x86-32 temp-debug-generic
-	perl merge.pl $^  > $@
-
-temp-x86-64: config-x86_64-generic config-x86-generic
-	perl merge.pl $^  > $@
-
-temp-x86_64-generic: temp-x86-64 temp-generic
-	perl merge.pl $^  > $@
-
-temp-x86_64-debug-generic: temp-x86-64 temp-debug-generic
-	perl merge.pl $^  > $@
-
-temp-powerpc64-generic: config-powerpc64-generic temp-generic
-	perl merge.pl $^  > $@
-
-temp-powerpc64-debug-generic: config-powerpc64-generic temp-debug-generic
-	perl merge.pl $^  > $@
-
-temp-s390-generic: config-s390x temp-generic
-	perl merge.pl $^ > $@
-
-$(CFG)-i686-PAE.config: config-i686-PAE temp-x86-32-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-i686-PAEdebug.config: config-i686-PAE temp-x86-debug-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-i686.config: /dev/null temp-x86-32-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-i686-debug.config: /dev/null temp-x86-debug-generic
-	perl merge.pl $^ i386 > $@
-
-$(CFG)-x86_64.config: /dev/null temp-x86_64-generic
-	perl merge.pl $^ x86_64 > $@
-
-$(CFG)-x86_64-debug.config: /dev/null temp-x86_64-debug-generic
-	perl merge.pl $^ x86_64 > $@
-
-$(CFG)-ppc64.config: config-powerpc64 temp-powerpc64-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc64-debug.config: config-powerpc64 temp-powerpc64-debug-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc64p7.config: config-powerpc64p7 temp-powerpc64-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc64le.config: config-powerpc64le temp-powerpc64-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc64le-debug.config: config-powerpc64le temp-powerpc64-debug-generic
-	perl merge.pl $^ powerpc > $@
-
-$(CFG)-s390x.config: config-s390x temp-s390-generic
-	perl merge.pl $^ s390 > $@
-
-$(CFG)-armv7hl.config: /dev/null temp-armv7
-	perl merge.pl $^ arm > $@
-
-$(CFG)-armv7hl-lpae.config: /dev/null temp-armv7-lpae
-	perl merge.pl $^ arm > $@
-
-$(CFG)-aarch64.config: /dev/null temp-arm64
-	perl merge.pl $^ arm64 > $@

Makefile.release

@@ -1,84 +0,0 @@
-# Make rules for configuration files.
-#
-# $Id$
-
-# This file contains only entries that change the config files.
-# Anything that changes kernel.spec itself should go in the main Makefile.
-
-config-release:
-	@perl -pi -e 's/CONFIG_LOCK_STAT=y/# CONFIG_LOCK_STAT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_STACK_USAGE=y/# CONFIG_DEBUG_STACK_USAGE is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_SLAB=y/# CONFIG_DEBUG_SLAB is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_MUTEXES=y/# CONFIG_DEBUG_MUTEXES is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_RT_MUTEXES=y/# CONFIG_DEBUG_RT_MUTEXES is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_LOCK_ALLOC=y/# CONFIG_DEBUG_LOCK_ALLOC is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_LOCK_TORTURE_TEST=m/# CONFIG_LOCK_TORTURE_TEST is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_PROVE_LOCKING=y/# CONFIG_PROVE_LOCKING is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_PROVE_RCU=y/# CONFIG_PROVE_RCU is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_SPINLOCK=y/# CONFIG_DEBUG_SPINLOCK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_VM=y/# CONFIG_DEBUG_VM is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAULT_INJECTION=y/# CONFIG_FAULT_INJECTION is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAILSLAB=y/# CONFIG_FAILSLAB is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_PAGE_ALLOC=y/# CONFIG_FAIL_PAGE_ALLOC is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_IO_TIMEOUT=y/# CONFIG_FAIL_IO_TIMEOUT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_MAKE_REQUEST=y/# CONFIG_FAIL_MAKE_REQUEST is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAIL_MMC_REQUEST=y/# CONFIG_FAIL_MMC_REQUEST is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAULT_INJECTION_DEBUG_FS=y/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_PI_LIST=y/# CONFIG_DEBUG_PI_LIST is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS=y/# CONFIG_DEBUG_OBJECTS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_FREE=y/# CONFIG_DEBUG_OBJECTS_FREE is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_TIMERS=y/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_WORK=y/# CONFIG_DEBUG_OBJECTS_WORK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_ARM64_PTDUMP=y/# CONFIG_ARM64_PTDUMP is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_EFI_PGT_DUMP=y/# CONFIG_EFI_PGT_DUMP is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CAN_DEBUG_DEVICES=y/# CONFIG_CAN_DEBUG_DEVICES is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_MODULE_FORCE_UNLOAD=y/# CONFIG_MODULE_FORCE_UNLOAD is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_NOTIFIERS=y/# CONFIG_DEBUG_NOTIFIERS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DMA_API_DEBUG=y/# CONFIG_DMA_API_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_PM_TEST_SUSPEND=y/# CONFIG_PM_TEST_SUSPEND is not set/' config-generic
-	@perl -pi -e 's/CONFIG_PM_ADVANCED_DEBUG=y/# CONFIG_PM_ADVANCED_DEBUG is not set/' config-generic
-	@perl -pi -e 's/CONFIG_B43_DEBUG=y/# CONFIG_B43_DEBUG is not set/' config-generic
-	@perl -pi -e 's/CONFIG_B43LEGACY_DEBUG=y/# CONFIG_B43LEGACY_DEBUG is not set/' config-generic
-	@perl -pi -e 's/CONFIG_MMIOTRACE=y/# CONFIG_MMIOTRACE is not set/' config-nodebug
-	@perl -pi -e 's/# CONFIG_STRIP_ASM_SYMS is not set/CONFIG_STRIP_ASM_SYMS=y/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_CREDENTIALS=y/# CONFIG_DEBUG_CREDENTIALS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_ACPI_DEBUG=y/# CONFIG_ACPI_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_EXT4_DEBUG=y/# CONFIG_EXT4_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_PERF_USE_VMALLOC=y/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_JBD2_DEBUG=y/# CONFIG_JBD2_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_NFSD_FAULT_INJECTION=y/# CONFIG_NFSD_FAULT_INJECTION is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_BLK_CGROUP=y/# CONFIG_DEBUG_BLK_CGROUP is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DRBD_FAULT_INJECTION=y/# CONFIG_DRBD_FAULT_INJECTION is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_ATH_DEBUG=y/# CONFIG_ATH_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CARL9170_DEBUGFS=y/# CONFIG_CARL9170_DEBUGFS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_IWLWIFI_DEVICE_TRACING=y/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DMADEVICES_DEBUG=y/# CONFIG_DMADEVICES_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CEPH_LIB_PRETTYDEBUG=y/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_QUOTA_DEBUG=y/# CONFIG_QUOTA_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_PER_CPU_MAPS=y/# CONFIG_DEBUG_PER_CPU_MAPS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_PERCPU_TEST=m/# CONFIG_PERCPU_TEST is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_TEST_LIST_SORT=y/# CONFIG_TEST_LIST_SORT is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_TEST_STRING_HELPERS=m/# CONFIG_TEST_STRING_HELPERS is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_ATOMIC_SLEEP=y/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DETECT_HUNG_TASK=y/# CONFIG_DETECT_HUNG_TASK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_WQ_WATCHDOG=y/# CONFIG_WQ_WATCHDOG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_DEBUG_KMEMLEAK=y/# CONFIG_DEBUG_KMEMLEAK is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_MAC80211_MESSAGE_TRACING=y/# CONFIG_MAC80211_MESSAGE_TRACING is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_XFS_WARN=y/# CONFIG_XFS_WARN is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_EDAC_DEBUG=y/# CONFIG_EDAC_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_RTLWIFI_DEBUG=y/# CONFIG_RTLWIFI_DEBUG is not set/' config-nodebug
-	@perl -pi -e 's/CONFIG_X86_DEBUG_STATIC_CPU_HAS=y/# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set/' config-nodebug
-
-	@# Undo anything that make extremedebug might have set
-	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-debug
-	@perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
-
-	@# Change defaults back to sane things.
-	@perl -pi -e 's/CONFIG_MAXSMP=y/# CONFIG_MAXSMP is not set/' config-x86-generic

Makefile.rhelver

@@ -0,0 +1,45 @@
+RHEL_MAJOR = 8
+RHEL_MINOR = 99
+
+#
+# RHEL_RELEASE
+# -------------
+#
+# Represents build number in 'release' part of RPM's name-version-release.
+#   name is <package_name>, e.g. kernel
+#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
+#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+RHEL_RELEASE = 122
+
+#
+# Early y+1 numbering
+# --------------------
+#
+# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
+# First is RHEL_RELEASE inherited/merged from y as-is, second number
+# is incremented with each build starting from 1. After merge from y,
+# it resets back to 1. This way y+1 nvr reflects status of last merge.
+#
+# Example:
+#
+# rhel8.0                        rhel-8.1
+#   kernel-4.18.0-58.el8   -->     kernel-4.18.0-58.1.el8
+#                                  kernel-4.18.0-58.2.el8
+#   kernel-4.18.0-59.el8           kernel-4.18.0-59.1.el8
+#   kernel-4.18.0-60.el8
+#   kernel-4.18.0-61.el8   -->     kernel-4.18.0-61.1.el8
+#
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+EARLY_YSTREAM ?= no
+EARLY_YBUILD:=
+EARLY_YRELEASE:=
+ifneq ("$(ZSTREAM)", "yes")
+  ifeq ("$(EARLY_YSTREAM)","yes")
+    RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
+  endif
+endif

PCI-Lock-down-BAR-access-when-module-security-is-ena.patch

@@ -1,118 +0,0 @@
-From 655fbf360e1481db4f06001f893d388c15ac307f Mon Sep 17 00:00:00 2001
-From: Matthew Garrett <matthew.garrett@nebula.com>
-Date: Thu, 8 Mar 2012 10:10:38 -0500
-Subject: [PATCH 02/20] PCI: Lock down BAR access when module security is
- enabled
-
-Any hardware that can potentially generate DMA has to be locked down from
-userspace in order to avoid it being possible for an attacker to modify
-kernel code, allowing them to circumvent disabled module loading or module
-signing. Default to paranoid - in future we can potentially relax this for
-sufficiently IOMMU-isolated devices.
-
-Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
----
- drivers/pci/pci-sysfs.c | 10 ++++++++++
- drivers/pci/proc.c      |  8 +++++++-
- drivers/pci/syscall.c   |  3 ++-
- 3 files changed, 19 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
-index 312f23a8429c..93e6ac103dd0 100644
---- a/drivers/pci/pci-sysfs.c
-+++ b/drivers/pci/pci-sysfs.c
-@@ -30,6 +30,7 @@
- #include <linux/vgaarb.h>
- #include <linux/pm_runtime.h>
- #include <linux/of.h>
-+#include <linux/module.h>
- #include "pci.h"
- 
- static int sysfs_initialized;	/* = 0 */
-@@ -710,6 +711,9 @@ static ssize_t pci_write_config(struct file *filp, struct kobject *kobj,
- 	loff_t init_off = off;
- 	u8 *data = (u8 *) buf;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	if (off > dev->cfg_size)
- 		return 0;
- 	if (off + count > dev->cfg_size) {
-@@ -1004,6 +1008,9 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
- 	resource_size_t start, end;
- 	int i;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	for (i = 0; i < PCI_ROM_RESOURCE; i++)
- 		if (res == &pdev->resource[i])
- 			break;
-@@ -1105,6 +1112,9 @@ static ssize_t pci_write_resource_io(struct file *filp, struct kobject *kobj,
- 				     struct bin_attribute *attr, char *buf,
- 				     loff_t off, size_t count)
- {
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	return pci_resource_io(filp, kobj, attr, buf, off, count, true);
- }
- 
-diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
-index 3f155e78513f..4265ea07e3b0 100644
---- a/drivers/pci/proc.c
-+++ b/drivers/pci/proc.c
-@@ -116,6 +116,9 @@ static ssize_t proc_bus_pci_write(struct file *file, const char __user *buf,
- 	int size = dev->cfg_size;
- 	int cnt;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	if (pos >= size)
- 		return 0;
- 	if (nbytes >= size)
-@@ -195,6 +198,9 @@ static long proc_bus_pci_ioctl(struct file *file, unsigned int cmd,
- #endif /* HAVE_PCI_MMAP */
- 	int ret = 0;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	switch (cmd) {
- 	case PCIIOC_CONTROLLER:
- 		ret = pci_domain_nr(dev->bus);
-@@ -233,7 +239,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
- 	struct pci_filp_private *fpriv = file->private_data;
- 	int i, ret;
- 
--	if (!capable(CAP_SYS_RAWIO))
-+	if (!capable(CAP_SYS_RAWIO) || secure_modules())
- 		return -EPERM;
- 
- 	/* Make sure the caller is mapping a real resource for this device */
-diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
-index b91c4da68365..98f5637304d1 100644
---- a/drivers/pci/syscall.c
-+++ b/drivers/pci/syscall.c
-@@ -10,6 +10,7 @@
- #include <linux/errno.h>
- #include <linux/pci.h>
- #include <linux/syscalls.h>
-+#include <linux/module.h>
- #include <asm/uaccess.h>
- #include "pci.h"
- 
-@@ -92,7 +93,7 @@ SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
- 	u32 dword;
- 	int err = 0;
- 
--	if (!capable(CAP_SYS_ADMIN))
-+	if (!capable(CAP_SYS_ADMIN) || secure_modules())
- 		return -EPERM;
- 
- 	dev = pci_get_bus_and_slot(bus, dfn);
--- 
-2.4.3
-

PatchList.txt

@@ -1,52 +0,0 @@
-**** Backports and patches headed/already upsteram *****************************
-
-* cpupower-Fix-segfault-due-to-incorrect-getopt_long-a.patch (rhbz 1000439)
-  - Queued for next upstream release I believe.  Fixes a segfault in cpupower
-
-* dm-cache-policy-mq_fix-large-scale-table-allocation-bug.patch (rhbz 993744)
-  - Still pending upstream
-
-* ath9k_rx_dma_stop_check.patch (rhbz 892811)
-  - Fixes some DMA issue on specific hardware.  Taken from
-https://dev.openwrt.org/browser/trunk/package/mac80211/patches/552-ath9k_rx_dma_stop_check.patch?rev=34910
-
-* secure-modules.patch
-* modsign-uefi.patch
-* sb-hibernate.patch
-* sysrq-secure-boot.patch
-  - Fedora secure boot support.
-  - Dear Matthew, this is your fault.  Run sed already and get a new set out.
-
-**** Other stuff that should go upstream (in decreasing likelyhood) ************
-
-* defaults-acpi-video.patch
-* disable-i8042-check-on-apple-mac.patch
-* no-pcspkr-modalias.patch
-* die-floppy-die.patch
-	Fedora policy decisions
-	Turn into CONFIG_ options and upstream ?
-
-* input-kill-stupid-messages.patch
-* silence-fbcon-logo.patch
-* silence-noise.patch
-	Fedora local 'hush' patches.  (TODO: push more upstream)
-
-* makefile-after_link.patch
-  Rolandware that is used by the debuginfo generation.
-  Possibly upstreamable ?
-
-* serial-460800.patch
-	Probably not upstreamable.
-	http://marc.theaimsgroup.com/?l=linux-kernel&m=112687270832687&w=2
-	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=126403
-	http://lkml.org/lkml/2006/8/2/208
-
-********************************************************************************
-
-'MUSTARD' patches.  Fedora local patches that are very unlikely to go upstream.
-
-* crash-driver.patch
-	Unlikely to go upstream.
-	https://bugzilla.redhat.com/show_bug.cgi?id=492803
-
-********************************************************************************

Patchlist.changelog

@@ -0,0 +1,228 @@
+https://gitlab.com/cki-project/kernel-ark/-/commit/8773e8c6039ff74d1426cc80de30de759cd0c2a2
+ 8773e8c6039ff74d1426cc80de30de759cd0c2a2 irq: export irq_check_status_bit
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e187313e5f0086538fefe0925ef84480f99616d8
+ e187313e5f0086538fefe0925ef84480f99616d8 gcc-plugins: fix gcc 11 indigestion with plugins...
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc
+ 0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc Fix up bad merge with efi: generalize efi_get_secureboot
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/364788093bdf437c33753d327136c363be8f756c
+ 364788093bdf437c33753d327136c363be8f756c Fix up a merge issue with rxe.c
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/a4d554ce883e24df77cce42bc2deec527028c213
+ a4d554ce883e24df77cce42bc2deec527028c213 Filter out LTO build options from the perl ccopts
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/17b0f7f1d49df30661b517d668715ff5ee1bab09
+ 17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e7c009cd91ababdbb5f726ef592c7800f0682d3a
+ e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7120b2a26fc4c7954fd0395973dc6739c110e091
+ 7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7a28e2fde653a161913abb8eee943cdacb5ff2ae
+ 7a28e2fde653a161913abb8eee943cdacb5ff2ae x86: Fix compile issues with rh_check_supported()
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/45f64c1a24e73af7987cffec3ea941e29364f87f
+ 45f64c1a24e73af7987cffec3ea941e29364f87f e1000e: bump up timeout to wait when ME un-configure ULP mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6c14763b1ce98698949ff45135c15e333aa6416d
+ 6c14763b1ce98698949ff45135c15e333aa6416d drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/67a19b16012b12cffba0b515c6503e5f8cdbb798
+ 67a19b16012b12cffba0b515c6503e5f8cdbb798 drm: panel: add Xingbangda XBD599 panel
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/d220dbf98cef820367b5a2a2eeaacebee958bdd4
+ d220dbf98cef820367b5a2a2eeaacebee958bdd4 dt-bindings: panel: add binding for Xingbangda XBD599 panel
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/80660062260dec4bdca9540922577542c16145e8
+ 80660062260dec4bdca9540922577542c16145e8 ARM: fix __get_user_check() in case uaccess_* calls are not inlined
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/24d8743613b2a6a585fc68cfe95078d9a3d5b389
+ 24d8743613b2a6a585fc68cfe95078d9a3d5b389 mm/kmemleak: skip late_init if not skip disable
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/b697ff5e26974fee8fcd31a1e221e9dd41515efc
+ b697ff5e26974fee8fcd31a1e221e9dd41515efc KEYS: Make use of platform keyring for module signature verify
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/081d2185e22479b449586c4e9843602ca0d49806
+ 081d2185e22479b449586c4e9843602ca0d49806 Drop that for now
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5ef51389cf6673a0e9e004909c7be1dc785050b2
+ 5ef51389cf6673a0e9e004909c7be1dc785050b2 Input: rmi4 - remove the need for artificial IRQ in case of HID
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/c1788012ebf8de46e9dc80d18051ed0c77c811b6
+ c1788012ebf8de46e9dc80d18051ed0c77c811b6 ARM: tegra: usb no reset
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/577365feaa909db4c0949eabfcda7e4a972b8e54
+ 577365feaa909db4c0949eabfcda7e4a972b8e54 arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/331be9c5a436057ee852075c102d9d90a9046a30
+ 331be9c5a436057ee852075c102d9d90a9046a30 redhat: rh_kabi: deduplication friendly structs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/34d79fbfb327f732ebf3ece4db21a14f81fedf03
+ 34d79fbfb327f732ebf3ece4db21a14f81fedf03 redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07
+ 93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07 redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/8e5c06356457f5351289e9f687b991189d163dae
+ 8e5c06356457f5351289e9f687b991189d163dae redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/212cbccda77cc81fcb60123907eabdac8ad5adb7
+ 212cbccda77cc81fcb60123907eabdac8ad5adb7 redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6f7744b412e1fb86a67d8761e64df69cf891b4ad
+ 6f7744b412e1fb86a67d8761e64df69cf891b4ad redhat: rh_kabi: Add macros to size and extend structs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/049623d33998be30d79692c69b34acb502c496e3
+ 049623d33998be30d79692c69b34acb502c496e3 Removing Obsolete hba pci-ids from rhel8
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/43ef1d631ecfe84084db3572c9ed1bedbdceb0f8
+ 43ef1d631ecfe84084db3572c9ed1bedbdceb0f8 mptsas: pci-id table changes
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e5726695109dd1a73da92487b75de6a51d54c015
+ e5726695109dd1a73da92487b75de6a51d54c015 mptsas: Taint kernel if mptsas is loaded
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16
+ ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16 mptspi: pci-id table changes
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/bd305f716d8b64be1926bc7aebe02468ac6bf599
+ bd305f716d8b64be1926bc7aebe02468ac6bf599 qla2xxx: Remove PCI IDs of deprecated adapter
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/803ff9a2c660c094e14d246ef05019bf6008d503
+ 803ff9a2c660c094e14d246ef05019bf6008d503 be2iscsi: remove unsupported device IDs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2cb24399321f555f18b0804d3fe02cf53949fba1
+ 2cb24399321f555f18b0804d3fe02cf53949fba1 mptspi: Taint kernel if mptspi is loaded
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ad1740551ff4af49f1ef10a130783d9369e955a0
+ ad1740551ff4af49f1ef10a130783d9369e955a0 hpsa: remove old cciss-based smartarray pci ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/4197ba3e766656eea9175c11ed05903620d98a28
+ 4197ba3e766656eea9175c11ed05903620d98a28 qla4xxx: Remove deprecated PCI IDs from RHEL 8
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7e285aec22ab1213639afda877902db363473cb0
+ 7e285aec22ab1213639afda877902db363473cb0 aacraid: Remove depreciated device and vendor PCI id's
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/846109a16be92155e69731c36dde48761d375153
+ 846109a16be92155e69731c36dde48761d375153 megaraid_sas: remove deprecated pci-ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6fd2019d01cee7ff36dc047d3ecdb504b968f222
+ 6fd2019d01cee7ff36dc047d3ecdb504b968f222 mpt*: remove certain deprecated pci-ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/dddcd5c1129b275ff160324036a662739db51fc3
+ dddcd5c1129b275ff160324036a662739db51fc3 kernel: add SUPPORT_REMOVED kernel taint
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/08d77161dba915d1ed0d9fede658085440ab4474
+ 08d77161dba915d1ed0d9fede658085440ab4474 Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e2dc2ca6a25a445bf22ceb6a8e38e02706605341
+ e2dc2ca6a25a445bf22ceb6a8e38e02706605341 Add option of 13 for FORCE_MAX_ZONEORDER
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2384646bf71d8c282cf49bb20321fdf802c61cce
+ 2384646bf71d8c282cf49bb20321fdf802c61cce s390: Lock down the kernel when the IPL secure flag is set
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5850c93175b9d2e1081873f4bbe08dead202cb08
+ 5850c93175b9d2e1081873f4bbe08dead202cb08 efi: Lock down the kernel if booted in secure boot mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/53250b991f841be025fa4d264850dadc0fae2861
+ 53250b991f841be025fa4d264850dadc0fae2861 efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/72223fd1241cc5c70b96a491db14d54c83beadd8
+ 72223fd1241cc5c70b96a491db14d54c83beadd8 security: lockdown: expose a hook to lock the kernel down
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7ba28f03674fa9346610c3fea7fc93bc58f06d2a
+ 7ba28f03674fa9346610c3fea7fc93bc58f06d2a Make get_cert_list() use efi_status_to_str() to print error messages.
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2ae9082db0b54d831a9b3782c049d9917e37d89f
+ 2ae9082db0b54d831a9b3782c049d9917e37d89f Add efi_status_to_str() and rework efi_status_to_err().
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cee1461ada1b7e4b92cd154e7ec241119afcd644
+ cee1461ada1b7e4b92cd154e7ec241119afcd644 Add support for deprecating processors
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2420149f8f5fa9dd1e2dc793765b498022922a81
+ 2420149f8f5fa9dd1e2dc793765b498022922a81 arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/1d69b30b98b60aff639351f5788d20a3b17f6e27
+ 1d69b30b98b60aff639351f5788d20a3b17f6e27 iommu/arm-smmu: workaround DMA mode issues
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6b2e73e508e7a117b1db91596097c00e5570f64a
+ 6b2e73e508e7a117b1db91596097c00e5570f64a rh_kabi: introduce RH_KABI_EXCLUDE
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ecb9206bce179eb600c52642a6753012a69ce4a2
+ ecb9206bce179eb600c52642a6753012a69ce4a2 ipmi: do not configure ipmi for HPE m400
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/473be59fe72afa9969cf8d10609ef3f14f594631
+ 473be59fe72afa9969cf8d10609ef3f14f594631 IB/rxe: Mark Soft-RoCE Transport driver as tech-preview
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/b94117795261f9c074a7addca2252238871b5081
+ b94117795261f9c074a7addca2252238871b5081 scsi: smartpqi: add inspur advantech ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cae871558c333880c1687cab6f2a71accf40d105
+ cae871558c333880c1687cab6f2a71accf40d105 ice: mark driver as tech-preview
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7d9cb007404211ea6638bde4a28dd0fbe8d95de0
+ 7d9cb007404211ea6638bde4a28dd0fbe8d95de0 kABI: Add generic kABI macros to use for kABI workarounds
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/bd353e9aae8877dd490e6c92b67849e0dcfbab25
+ bd353e9aae8877dd490e6c92b67849e0dcfbab25 add pci_hw_vendor_status()
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/41a259999969bbdfe9f556ce71f2c3c07d7454f4
+ 41a259999969bbdfe9f556ce71f2c3c07d7454f4 ahci: thunderx2: Fix for errata that affects stop engine
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2a107343529ce648c11bff62e9f72bbeec738f3f
+ 2a107343529ce648c11bff62e9f72bbeec738f3f Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/03e48a48f400a51a182a1254cf22ff0c08706d76
+ 03e48a48f400a51a182a1254cf22ff0c08706d76 bpf: Add tech preview taint for syscall
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/607f0e89af7ef5682f79f2eea0a99638a1bc0c4f
+ 607f0e89af7ef5682f79f2eea0a99638a1bc0c4f bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/31da227877eb734ddb484bc519aae85ce200802e
+ 31da227877eb734ddb484bc519aae85ce200802e add Red Hat-specific taint flags
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7a2e2c83be0230667756cccb5bc3687419dfbb8b
+ 7a2e2c83be0230667756cccb5bc3687419dfbb8b kdump: fix a grammar issue in a kernel message
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/d345d54d33e7d496c9d845e4723550dd37cb3f88
+ d345d54d33e7d496c9d845e4723550dd37cb3f88 tags.sh: Ignore redhat/rpm
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0
+ 5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0 put RHEL info into generated headers
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ce12884c009ec3bed11100c9d19f6d97628cf8ae
+ ce12884c009ec3bed11100c9d19f6d97628cf8ae kdump: add support for crashkernel=auto
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/18fb1389afccdc5535977a10669b49a37829b55a
+ 18fb1389afccdc5535977a10669b49a37829b55a kdump: round up the total memory size to 128M for crashkernel reservation
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5fb9821441cc0b77101ad9c0dfaa747957a4cce4
+ 5fb9821441cc0b77101ad9c0dfaa747957a4cce4 acpi: prefer booting with ACPI over DTS
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/0cf21a40db6fca5d89cf3d65808117c8c14e524e
+ 0cf21a40db6fca5d89cf3d65808117c8c14e524e aarch64: acpi scan: Fix regression related to X-Gene UARTs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/de13e14cc2388478d9a2c68c5d90affd92098f11
+ de13e14cc2388478d9a2c68c5d90affd92098f11 ACPI / irq: Workaround firmware issue on X-Gene based m400
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/71c098f4afa38a15a95495c14f71fb087ab27308
+ 71c098f4afa38a15a95495c14f71fb087ab27308 modules: add rhelversion MODULE_INFO tag
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/3247f9c838f4aa91aa5d08c152b385d61554d4b5
+ 3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e80982feaa68226ff60d2f83dace2016c35270d3
+ e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2987f9a606df106f5bdfa4113eb55356a21085a6
+ 2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/a99885a5e77af594dfdce586cc83e5911d8401ce
+ a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cd3a5d30570279538623ea8a1255db0ee4b728f7
+ cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile
+

README.rst

@@ -0,0 +1,25 @@
+===================
+The Kernel dist-git
+===================
+
+The kernel is maintained in a `source tree`_ rather than directly in dist-git.
+The specfile is maintained as a `template`_ in the source tree along with a set
+of build scripts to generate configurations, (S)RPMs, and to populate the
+dist-git repository.
+
+The `documentation`_ for the source tree covers how to contribute and maintain
+the tree.
+
+If you're looking for the downstream patch set it's available in the source
+tree with "git log master..ark-patches" or
+`online`_.
+
+Each release in dist-git is tagged in the source repository so you can easily
+check out the source tree for a build. The tags are in the format
+name-version-release, but note release doesn't contain the dist tag since the
+source can be built in different build roots (Fedora, CentOS, etc.)
+
+.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
+.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
+.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
+.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

README.txt

@@ -1,82 +0,0 @@
-
-		Kernel package tips & tricks.
-		~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The kernel is one of the more complicated packages in the distro, and
-for the newcomer, some of the voodoo in the spec file can be somewhat scary.
-This file attempts to document some of the magic.
-
-
-Speeding up make prep
----------------------
-The kernel is nearly 500MB of source code, and as such, 'make prep'
-takes a while. The spec file employs some trickery so that repeated
-invocations of make prep don't take as long.  Ordinarily the %prep
-phase of a package will delete the tree it is about to untar/patch.
-The kernel %prep keeps around an unpatched version of the tree,
-and makes a symlink tree clone of that clean tree and than applies
-the patches listed in the spec to the symlink tree.
-This makes a huge difference if you're doing multiple make preps a day.
-As an added bonus, doing a diff between the clean tree and the symlink
-tree is slightly faster than it would be doing two proper copies of the tree.
-
-
-build logs.
------------
-There's a convenience helper script in scripts/grab-logs.sh
-that will grab the build logs from koji for the kernel version reported
-by make verrel
-
-
-config heirarchy.
------------------
-Instead of having to maintain a config file for every arch variant we build on,
-the kernel spec uses a nested system of configs.  At the top level, is
-config-generic. Add options here that should be present in every possible
-config on all architectures.
-
-Beneath this are per-arch overrides. For example config-x86-generic add
-additional x86 specific options, and also _override_ any options that were
-set in config-generic.
-
-The heirarchy looks like this..
-
-                           config-generic
-                                 |
-                         config-x86-generic
-                         |                |
-             config-x86-32-generic   config-x86-64-generic
-
-An option set in a lower level will override the same option set in one
-of the higher levels.
-
-
-There exist two additional overrides, config-debug, and config-nodebug,
-which override -generic, and the per-arch overrides. It is documented
-further below.
-
-
-debug options.
---------------
-This is a little complicated, as the purpose & meaning of this changes
-depending on where we are in the release cycle.
-If we are building for a current stable release, 'make release' has
-typically been run already, which sets up the following..
-- Two builds occur, a 'kernel' and a 'kernel-debug' flavor.
-- kernel-debug will get various heavyweight debugging options like
-  lockdep etc turned on.
-
-If we are building for rawhide, 'make debug' has been run, which changes
-the status quo to:
-- We only build one kernel 'kernel'
-- The debug options from 'config-debug' are always turned on.
-This is done to increase coverage testing, as not many people actually
-run kernel-debug.
-
-To add new debug options, add an option to _both_ config-debug and config-nodebug,
-and also new stanzas to the Makefile 'debug' and 'release' targets.
-
-Sometimes debug options get added to config-generic, or per-arch overrides
-instead of config-[no]debug. In this instance, the options should have no
-discernable performance impact, otherwise they belong in the debug files.
-

Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch

@@ -1,42 +0,0 @@
-From d4ae417828427de74e9f857f9caa49580aecf1fe Mon Sep 17 00:00:00 2001
-From: Matthew Garrett <matthew.garrett@nebula.com>
-Date: Fri, 9 Mar 2012 09:28:15 -0500
-Subject: [PATCH 06/20] Restrict /dev/mem and /dev/kmem when module loading is
- restricted
-
-Allowing users to write to address space makes it possible for the kernel
-to be subverted, avoiding module loading restrictions. Prevent this when
-any restrictions have been imposed on loading modules.
-
-Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
----
- drivers/char/mem.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/drivers/char/mem.c b/drivers/char/mem.c
-index 53fe675f9bd7..b52c88860532 100644
---- a/drivers/char/mem.c
-+++ b/drivers/char/mem.c
-@@ -167,6 +167,9 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
- 	if (p != *ppos)
- 		return -EFBIG;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	if (!valid_phys_addr_range(p, count))
- 		return -EFAULT;
- 
-@@ -513,6 +516,9 @@ static ssize_t write_kmem(struct file *file, const char __user *buf,
- 	char *kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */
- 	int err = 0;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	if (p < (unsigned long) high_memory) {
- 		unsigned long to_write = min_t(unsigned long, count,
- 					       (unsigned long)high_memory - p);
--- 
-2.4.3
-

TODO

@@ -1,10 +0,0 @@
-Config TODOs:
-* review & disable a bunch of the I2C, RTC, DVB, SOUND options.
-
-Spec file TODOs:
-
-* modules-extra: Do a few more things to make it a bit more robust.
-  - Allow for comments in the mod-extra.list file.
-  - Don't fail the build if a module is listed but not built (maybe).
-  - See if it can be tied into Kconfig instead of module names.
-

acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch

@@ -1,39 +0,0 @@
-From 32d3dc2147823a32c8a7771d8fe0f2d1ef057c6a Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@redhat.com>
-Date: Mon, 25 Jun 2012 19:57:30 -0400
-Subject: [PATCH 07/20] acpi: Ignore acpi_rsdp kernel parameter when module
- loading is restricted
-
-This option allows userspace to pass the RSDP address to the kernel, which
-makes it possible for a user to circumvent any restrictions imposed on
-loading modules. Disable it in that case.
-
-Signed-off-by: Josh Boyer <jwboyer@redhat.com>
----
- drivers/acpi/osl.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
-index 739a4a6b3b9b..9ef2a020a7a9 100644
---- a/drivers/acpi/osl.c
-+++ b/drivers/acpi/osl.c
-@@ -40,6 +40,7 @@
- #include <linux/list.h>
- #include <linux/jiffies.h>
- #include <linux/semaphore.h>
-+#include <linux/module.h>
- 
- #include <asm/io.h>
- #include <asm/uaccess.h>
-@@ -253,7 +254,7 @@ early_param("acpi_rsdp", setup_acpi_rsdp);
- acpi_physical_address __init acpi_os_get_root_pointer(void)
- {
- #ifdef CONFIG_KEXEC
--	if (acpi_rsdp)
-+	if (acpi_rsdp && !secure_modules())
- 		return acpi_rsdp;
- #endif
- 
--- 
-2.4.3
-

arm-i.MX6-Utilite-device-dtb.patch

@@ -1,62 +0,0 @@
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Fri, 11 Jul 2014 00:10:56 +0100
-Subject: [PATCH] arm: i.MX6 Utilite device dtb
-
----
- arch/arm/boot/dts/imx6q-cm-fx6.dts | 38 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
-diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
-index 99b46f8030ad..8b6ddd16dcc5 100644
---- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
-+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
-@@ -97,11 +97,49 @@
- 				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
- 			>;
- 		};
-+
-+		pinctrl_usdhc1: usdhc1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17059
-+				MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10059
-+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17059
-+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17059
-+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17059
-+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17059
-+			>;
-+		};
-+
-+		pinctrl_usdhc3: usdhc3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
-+				MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
-+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
-+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
-+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
-+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
-+			>;
-+		};
- 	};
- };
- 
-+&sata {
-+	status = "okay";
-+};
-+
- &uart4 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&pinctrl_uart4>;
- 	status = "okay";
- };
-+
-+&usdhc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usdhc1>;
-+	status = "okay";
-+};
-+
-+&usdhc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usdhc3>;
-+	status = "okay";
-+};

arm64-acpi-drop-expert-patch.patch

@@ -1,21 +0,0 @@
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Sun, 3 May 2015 18:35:23 +0100
-Subject: [PATCH] arm64: acpi drop expert patch
-
----
- drivers/acpi/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
-index 114cf48085ab..70ba3ef9a37b 100644
---- a/drivers/acpi/Kconfig
-+++ b/drivers/acpi/Kconfig
-@@ -5,7 +5,7 @@
- menuconfig ACPI
- 	bool "ACPI (Advanced Configuration and Power Interface) Support"
- 	depends on !IA64_HP_SIM
--	depends on IA64 || X86 || (ARM64 && EXPERT)
-+	depends on IA64 || X86 || ARM64
- 	depends on PCI
- 	select PNP
- 	default y

arm64-avoid-needing-console-to-enable-serial-console.patch

@@ -1,46 +0,0 @@
-From ede02df9a481ba07348e6fd4393ba2e273ef16d8 Mon Sep 17 00:00:00 2001
-From: Mark Salter <msalter@redhat.com>
-Date: Wed, 25 Mar 2015 14:17:50 -0400
-Subject: [PATCH] arm64: avoid needing console= to enable serial console
-
-Tell kernel to prefer one of the serial ports for console on
-platforms currently supported (pl011 or 8250). console= on
-command line will override these assumed preferences. This is
-just a hack to get the behavior we want from DT provided by
-firmware.
-
-Signed-off-by: Mark Salter <msalter@redhat.com>
----
- arch/arm64/kernel/setup.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
-diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
-index 8119479..ea9ff80 100644
---- a/arch/arm64/kernel/setup.c
-+++ b/arch/arm64/kernel/setup.c
-@@ -381,3 +381,22 @@ static int __init topology_init(void)
- 	return 0;
- }
- subsys_initcall(topology_init);
-+
-+/*
-+ * Temporary hack to avoid need for console= on command line
-+ */
-+static int __init arm64_console_setup(void)
-+{
-+	/* Allow cmdline to override our assumed preferences */
-+	if (console_set_on_cmdline)
-+		return 0;
-+
-+	if (IS_ENABLED(CONFIG_SERIAL_AMBA_PL011))
-+		add_preferred_console("ttyAMA", 0, "115200");
-+
-+	if (IS_ENABLED(CONFIG_SERIAL_8250))
-+		add_preferred_console("ttyS", 0, "115200");
-+
-+	return 0;
-+}
-+early_initcall(arm64_console_setup);
--- 
-2.5.0
-

asus-wmi-Restrict-debugfs-interface-when-module-load.patch

@@ -1,54 +0,0 @@
-From 32f701d40657cc3c982b8cba4bf73452ccdd6697 Mon Sep 17 00:00:00 2001
-From: Matthew Garrett <matthew.garrett@nebula.com>
-Date: Fri, 9 Mar 2012 08:46:50 -0500
-Subject: [PATCH 05/20] asus-wmi: Restrict debugfs interface when module
- loading is restricted
-
-We have no way of validating what all of the Asus WMI methods do on a
-given machine, and there's a risk that some will allow hardware state to
-be manipulated in such a way that arbitrary code can be executed in the
-kernel, circumventing module loading restrictions. Prevent that if any of
-these features are enabled.
-
-Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
----
- drivers/platform/x86/asus-wmi.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
-index efbc3f0c592b..071171be4b7f 100644
---- a/drivers/platform/x86/asus-wmi.c
-+++ b/drivers/platform/x86/asus-wmi.c
-@@ -1868,6 +1868,9 @@ static int show_dsts(struct seq_file *m, void *data)
- 	int err;
- 	u32 retval = -1;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	err = asus_wmi_get_devstate(asus, asus->debug.dev_id, &retval);
- 
- 	if (err < 0)
-@@ -1884,6 +1887,9 @@ static int show_devs(struct seq_file *m, void *data)
- 	int err;
- 	u32 retval = -1;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	err = asus_wmi_set_devstate(asus->debug.dev_id, asus->debug.ctrl_param,
- 				    &retval);
- 
-@@ -1908,6 +1914,9 @@ static int show_call(struct seq_file *m, void *data)
- 	union acpi_object *obj;
- 	acpi_status status;
- 
-+	if (secure_modules())
-+		return -EPERM;
-+
- 	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID,
- 				     1, asus->debug.method_id,
- 				     &input, &output);
--- 
-2.4.3
-

ath9k-rx-dma-stop-check.patch

@@ -1,38 +0,0 @@
-From: "kernel-team@fedoraproject.org" <kernel-team@fedoraproject.org>
-Date: Wed, 6 Feb 2013 09:57:47 -0500
-Subject: [PATCH] ath9k: rx dma stop check
-
----
- drivers/net/wireless/ath/ath9k/mac.c | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
-index bba85d1a6cd1..ebbee8f17130 100644
---- a/drivers/net/wireless/ath/ath9k/mac.c
-+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -693,7 +693,7 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
- {
- #define AH_RX_STOP_DMA_TIMEOUT 10000   /* usec */
- 	struct ath_common *common = ath9k_hw_common(ah);
--	u32 mac_status, last_mac_status = 0;
-+	u32 mac_status = 0, last_mac_status = 0;
- 	int i;
- 
- 	/* Enable access to the DMA observation bus */
-@@ -723,6 +723,16 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
- 	}
- 
- 	if (i == 0) {
-+		if (!AR_SREV_9300_20_OR_LATER(ah) &&
-+		    (mac_status & 0x700) == 0) {
-+			/*
-+			 * DMA is idle but the MAC is still stuck
-+			 * processing events
-+			 */
-+			*reset = true;
-+			return true;
-+		}
-+
- 		ath_err(common,
- 			"DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x DMADBG_7=0x%08x\n",
- 			AH_RX_STOP_DMA_TIMEOUT / 1000,

cfg80211-wext-fix-message-ordering.patch

@@ -1,83 +0,0 @@
-From cb150b9d23be6ee7f3a0fff29784f1c5b5ac514d Mon Sep 17 00:00:00 2001
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Wed, 27 Jan 2016 13:29:34 +0100
-Subject: cfg80211/wext: fix message ordering
-
-Since cfg80211 frequently takes actions from its netdev notifier
-call, wireless extensions messages could still be ordered badly
-since the wext netdev notifier, since wext is built into the
-kernel, runs before the cfg80211 netdev notifier. For example,
-the following can happen:
-
-5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
-    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
-5: wlan1: <BROADCAST,MULTICAST,UP>
-    link/ether
-
-when setting the interface down causes the wext message.
-
-To also fix this, export the wireless_nlevent_flush() function
-and also call it from the cfg80211 notifier.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
- include/net/iw_handler.h | 6 ++++++
- net/wireless/core.c      | 2 ++
- net/wireless/wext-core.c | 3 ++-
- 3 files changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
-index 8f81bbb..e0f4109 100644
---- a/include/net/iw_handler.h
-+++ b/include/net/iw_handler.h
-@@ -439,6 +439,12 @@ int dev_get_wireless_info(char *buffer, char **start, off_t offset, int length);
- /* Send a single event to user space */
- void wireless_send_event(struct net_device *dev, unsigned int cmd,
- 			 union iwreq_data *wrqu, const char *extra);
-+#ifdef CONFIG_WEXT_CORE
-+/* flush all previous wext events - if work is done from netdev notifiers */
-+void wireless_nlevent_flush(void);
-+#else
-+static inline void wireless_nlevent_flush(void) {}
-+#endif
- 
- /* We may need a function to send a stream of events to user space.
-  * More on that later... */
-diff --git a/net/wireless/core.c b/net/wireless/core.c
-index b091551..8f0bac7 100644
---- a/net/wireless/core.c
-+++ b/net/wireless/core.c
-@@ -1147,6 +1147,8 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
- 		return NOTIFY_DONE;
- 	}
- 
-+	wireless_nlevent_flush();
-+
- 	return NOTIFY_OK;
- }
- 
-diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
-index 87dd619..b50ee5d 100644
---- a/net/wireless/wext-core.c
-+++ b/net/wireless/wext-core.c
-@@ -342,7 +342,7 @@ static const int compat_event_type_size[] = {
- 
- /* IW event code */
- 
--static void wireless_nlevent_flush(void)
-+void wireless_nlevent_flush(void)
- {
- 	struct sk_buff *skb;
- 	struct net *net;
-@@ -355,6 +355,7 @@ static void wireless_nlevent_flush(void)
- 				    GFP_KERNEL);
- 	}
- }
-+EXPORT_SYMBOL_GPL(wireless_nlevent_flush);
- 
- static int wext_netdev_notifier_call(struct notifier_block *nb,
- 				     unsigned long state, void *ptr)
--- 
-cgit v0.12
-

check-kabi

@@ -0,0 +1,149 @@
+#!/usr/bin/python3
+#
+# check-kabi - Red Hat kABI reference checking tool
+#
+# We use this script to check against reference Module.kabi files.
+#
+# Author: Jon Masters <jcm@redhat.com>
+# Copyright (C) 2007-2009 Red Hat, Inc.
+#
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPL).
+
+# Changelog:
+#
+# 2018/06/01 - Update for python3 by Petr Oros.
+# 2009/08/15 - Updated for use in RHEL6.
+# 2007/06/13 - Initial rewrite in python by Jon Masters.
+
+__author__ = "Jon Masters <jcm@redhat.com>"
+__version__ = "2.0"
+__date__ = "2009/08/15"
+__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
+__license__ = "GPL"
+
+import getopt
+import string
+import sys
+
+true = 1
+false = 0
+
+
+def load_symvers(symvers, filename):
+    """Load a Module.symvers file."""
+
+    symvers_file = open(filename, "r")
+
+    while true:
+        in_line = symvers_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type = in_line.split()
+
+        symvers[symbol] = in_line[0:-1]
+
+
+def load_kabi(kabi, filename):
+    """Load a Module.kabi file."""
+
+    kabi_file = open(filename, "r")
+
+    while true:
+        in_line = kabi_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type = in_line.split()
+
+        kabi[symbol] = in_line[0:-1]
+
+
+def check_kabi(symvers, kabi):
+    """Check Module.kabi and Module.symvers files."""
+
+    fail = 0
+    warn = 0
+    changed_symbols = []
+    moved_symbols = []
+
+    for symbol in kabi:
+        abi_hash, abi_sym, abi_dir, abi_type = kabi[symbol].split()
+        if symbol in symvers:
+            sym_hash, sym_sym, sym_dir, sym_type = symvers[symbol].split()
+            if abi_hash != sym_hash:
+                fail = 1
+                changed_symbols.append(symbol)
+
+            if abi_dir != sym_dir:
+                warn = 1
+                moved_symbols.append(symbol)
+        else:
+            fail = 1
+            changed_symbols.append(symbol)
+
+    if fail:
+        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
+        print("")
+        print("The following symbols have been changed (this will cause an ABI breakage):")
+        print("")
+        for symbol in changed_symbols:
+            print(symbol)
+        print("")
+
+    if warn:
+        print("*** WARNING - ABI SYMBOLS MOVED ***")
+        print("")
+        print("The following symbols moved (typically caused by moving a symbol from being")
+        print("provided by the kernel vmlinux out to a loadable module):")
+        print("")
+        for symbol in moved_symbols:
+            print(symbol)
+        print("")
+
+    """Halt the build, if we got errors and/or warnings. In either case,
+       double-checkig is required to avoid introducing / concealing
+       KABI inconsistencies."""
+    if fail or warn:
+        sys.exit(1)
+    sys.exit(0)
+
+
+def usage():
+    print("""
+check-kabi: check Module.kabi and Module.symvers files.
+
+    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
+
+""")
+
+
+if __name__ == "__main__":
+
+    symvers_file = ""
+    kabi_file = ""
+
+    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
+
+    for o, v in opts:
+        if o == "-s":
+            symvers_file = v
+        if o == "-h":
+            usage()
+            sys.exit(0)
+        if o == "-k":
+            kabi_file = v
+
+    if (symvers_file == "") or (kabi_file == ""):
+        usage()
+        sys.exit(1)
+
+    symvers = {}
+    kabi = {}
+
+    load_symvers(symvers, symvers_file)
+    load_kabi(kabi, kabi_file)
+    check_kabi(symvers, kabi)

config-arm-generic

@@ -1,484 +0,0 @@
-CONFIG_KUSER_HELPERS=y
-# CONFIG_VDSO is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
-CONFIG_FB_SSD1307=m
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_NFS_FS=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-
-CONFIG_CC_STACKPROTECTOR=y
-
-# CONFIG_PID_IN_CONTEXTIDR is not set
-
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_IWMMXT is not set
-
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-# CONFIG_PWM_FSL_FTM is not set
-
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_GPIO=y
-
-CONFIG_RCU_FANOUT_LEAF=16
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_ARM_SP805_WATCHDOG=m
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_NR_CPUS=8
-
-CONFIG_SWIOTLB=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_FB_SIMPLE=y
-
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-
-CONFIG_ARM_PMU=y
-
-# ARM AMBA generic HW
-CONFIG_ARM_AMBA=y
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_CCI=y
-CONFIG_ARM_CCN=y
-CONFIG_ARM_CCI400_PMU=y
-CONFIG_ARM_CCI500_PMU=y
-CONFIG_ARM_DMA_USE_IOMMU=y
-CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-# CONFIG_HISILICON_IRQ_MBIGEN is not set
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_SMMU=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_PL330_DMA=m
-CONFIG_GPIO_PL061=y
-CONFIG_USB_ISP1760=m
-CONFIG_ARM_PL172_MPMC=m
-
-# HW crypto and rng
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA512_ARM_NEON=y
-CONFIG_CRYPTO_SHA512_ARM=y
-
-# ARM VExpress
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_MFD_VEXPRESS_SYSREG=y
-CONFIG_VEXPRESS_SYSCFG=y
-CONFIG_COMMON_CLK_VERSATILE=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_VEXPRESS_OSC=y
-CONFIG_I2C_VERSATILE=m
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_REGULATOR_VEXPRESS=m
-CONFIG_SENSORS_VEXPRESS=m
-CONFIG_CLKSRC_VERSATILE=y
-CONFIG_POWER_RESET_VERSATILE=y
-# CONFIG_ARM_CHARLCD is not set
-
-# Rockchips
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_I2C_RK3X=m
-CONFIG_SPI_ROCKCHIP=m
-CONFIG_PWM_ROCKCHIP=m
-CONFIG_ROCKCHIP_SARADC=m
-CONFIG_ROCKCHIP_IODOMAIN=m
-CONFIG_MMC_DW_ROCKCHIP=m
-CONFIG_EMAC_ROCKCHIP=m
-CONFIG_MFD_RK808=m
-CONFIG_COMMON_CLK_RK808=m
-CONFIG_REGULATOR_RK808=m
-CONFIG_RTC_DRV_RK808=m
-CONFIG_RTC_DRV_HYM8563=m
-CONFIG_ROCKCHIP_SARADC=m
-CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_ROCKCHIP_THERMAL=m
-CONFIG_DRM_ROCKCHIP=m
-CONFIG_ROCKCHIP_DW_HDMI=m
-CONFIG_ROCKCHIP_DW_MIPI_DSI=y
-CONFIG_PHY_ROCKCHIP_USB=m
-CONFIG_DWMAC_ROCKCHIP=m
-CONFIG_SND_SOC_ROCKCHIP=m
-CONFIG_SND_SOC_ROCKCHIP_I2S=m
-CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
-CONFIG_SND_SOC_ROCKCHIP_RT5645=m
-CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
-CONFIG_REGULATOR_ACT8865=m
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-CONFIG_CRYPTO_DEV_ROCKCHIP=m
-CONFIG_ROCKCHIP_EFUSE=m
-
-# Tegra
-# CONFIG_TEGRA_AHB is not set
-#
-# Virt
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_TIME_ACCOUNTING=y
-
-CONFIG_EFI=y
-CONFIG_EFI_VARS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_EFI_VARS_PSTORE=y
-CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
-
-# Power management / thermal / cpu scaling
-# CONFIG_ARM_CPUIDLE is not set
-# CONFIG_ARM_DT_BL_CPUFREQ is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-
-# Device tree
-CONFIG_DTC=y
-CONFIG_DMA_OF=y
-CONFIG_OF=y
-# CONFIG_OF_UNITTEST is not set
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_PCI_IRQ=m
-CONFIG_OF_PCI=m
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCIE_IPROC is not set
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OF_RESOLVE=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PATA_OF_PLATFORM=m
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_THERMAL_OF=y
-
-# CONFIG_OF_MDIO is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-
-# Mailbox
-CONFIG_MAILBOX=y
-CONFIG_ARM_MHU=m
-# CONFIG_PL320_MBOX is not set
-CONFIG_ARM_SCPI_PROTOCOL=m
-
-# NVMem
-CONFIG_NVMEM=m
-
-# USB
-CONFIG_USB_OHCI_HCD_PLATFORM=m
-CONFIG_USB_EHCI_HCD_PLATFORM=m
-CONFIG_USB_XHCI_PLATFORM=m
-CONFIG_USB_ULPI=y
-
-# usb gadget
-CONFIG_USB_OTG=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_VBUS_DRAW=100
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_U_SERIAL_CONSOLE=y
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_DUAL_ROLE=y
-CONFIG_USB_MUSB_DSPS=m
-# CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_MUSB_TUSB6010 is not set
-# CONFIG_USB_MUSB_UX500 is not set
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_USB_CONFIGFS=m
-CONFIG_USB_CONFIGFS_ACM=y
-CONFIG_USB_CONFIGFS_ECM=y
-CONFIG_USB_CONFIGFS_ECM_SUBSET=y
-CONFIG_USB_CONFIGFS_EEM=y
-CONFIG_USB_CONFIGFS_F_TCM=y
-CONFIG_USB_CONFIGFS_MASS_STORAGE=y
-CONFIG_USB_CONFIGFS_NCM=y
-CONFIG_USB_CONFIGFS_OBEX=y
-# CONFIG_USB_CONFIGFS_RNDIS is not set
-CONFIG_USB_CONFIGFS_SERIAL=y
-# CONFIG_USB_CONFIGFS_F_LB_SS is not set
-# CONFIG_USB_CONFIGFS_F_FS is not set
-# CONFIG_USB_CONFIGFS_F_UAC1 is not set
-# CONFIG_USB_CONFIGFS_F_UAC2 is not set
-# CONFIG_USB_CONFIGFS_F_MIDI is not set
-# CONFIG_USB_CONFIGFS_F_HID is not set
-# CONFIG_USB_CONFIGFS_F_UVC is not set
-# CONFIG_USB_CONFIGFS_F_PRINTER is not set
-
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_BDC_UDC is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_AMD5536UDC is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_ZERO_HNPTEST is not set
-
-# MMC/SD
-CONFIG_MMC_SPI=m
-CONFIG_MMC_SDHCI_OF_ARASAN=m
-
-# Designware (used by numerous devices)
-CONFIG_MMC_DW=m
-CONFIG_MMC_DW_PLTFM=m
-CONFIG_MMC_DW_IDMAC=y
-CONFIG_MMC_DW_K3=m
-CONFIG_MMC_DW_PCI=m
-CONFIG_SPI_DW_MMIO=m
-CONFIG_SPI_DW_PCI=m
-# CONFIG_SPI_DW_MID_DMA is not set
-# CONFIG_MMC_DW_IDMAC is not set
-# CONFIG_MMC_QCOM_DML is not set
-CONFIG_USB_DWC2=m
-CONFIG_USB_DWC2_DUAL_ROLE=y
-CONFIG_USB_DWC2_PLATFORM=m
-CONFIG_USB_DWC2_PCI=m
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-CONFIG_USB_DWC3=m
-CONFIG_USB_DWC3_DUAL_ROLE=y
-CONFIG_USB_DWC3_PCI=m
-CONFIG_USB_DWC3_OF_SIMPLE=m
-# CONFIG_USB_DWC3_DEBUG is not set
-CONFIG_USB_DWC3_ULPI=y
-CONFIG_DW_WATCHDOG=m
-CONFIG_PCIE_DW=y
-# CONFIG_MMC_DW_EXYNOS is not set
-CONFIG_I2C_DESIGNWARE_CORE=m
-CONFIG_I2C_DESIGNWARE_PLATFORM=m
-CONFIG_GPIO_DWAPB=m
-
-# External Connectors
-CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
-CONFIG_EXTCON_ADC_JACK=m
-CONFIG_EXTCON_USB_GPIO=m
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_RT8973A is not set
-
-# MTD
-# CONFIG_MTD_AFS_PARTS is not set
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_OF_PARTS=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_OF=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-
-# GPIO
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=m
-CONFIG_GPIO_GENERIC_PLATFORM=m
-CONFIG_GPIO_WATCHDOG=m
-CONFIG_GPIOLIB=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_BACKLIGHT_GPIO=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
-CONFIG_INPUT_SOC_BUTTON_ARRAY=m
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_RESTART=y
-# CONFIG_GPIO_74XX_MMIO is not set
-
-# Pin stuff
-CONFIG_PINMUX=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_PINCTRL_SINGLE=y
-
-#i2c
-CONFIG_I2C_ARB_GPIO_CHALLENGE=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_MUX=m
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PINCTRL=m
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
-CONFIG_I2C_MUX_REG=m
-
-# spi
-CONFIG_SPI_PL022=m
-
-# Sensors
-CONFIG_SENSORS_IIO_HWMON=m
-CONFIG_IIO_SYSFS_TRIGGER=m
-CONFIG_SENSORS_ARM_SCPI=m
-
-# PHY framework
-CONFIG_GENERIC_PHY=y
-
-CONFIG_SMC91X=m
-CONFIG_SMC911X=m
-
-CONFIG_CPU_THERMAL=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-
-# Contiguous Memory Allocator
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y
-# CONFIG_CMA_DEBUG is not set
-CONFIG_CMA_DEBUGFS=y
-CONFIG_CMA_SIZE_MBYTES=16
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-
-# EDAC
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=m
-CONFIG_EDAC_LEGACY_SYSFS=y
-
-# VFIO
-CONFIG_VFIO_PLATFORM=m
-CONFIG_VFIO_AMBA=m
-# CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET is not set
-
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_XEN is not set
-# CONFIG_DRM_RCAR_DU is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_DRM_SHMOBILE is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_LOCK_STAT is not set
-
-# CONFIG_CADENCE_WATCHDOG is not set
-
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_TEGRA is not set
-# CONFIG_SHMOBILE_IOMMU is not set
-
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-CONFIG_COMMON_CLK_SCPI=m
-
-# CONFIG_ARM_PTDUMP is not set
-
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_OMAP_GPMC_DEBUG is not set
-
-### turn off things which make no sense on embedded SoC
-
-# core
-
-# CONFIG_INFINIBAND is not set
-# CONFIG_ISDN is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PARPORT is not set
-# CONFIG_FIREWIRE is not set
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ISDN is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_AGP is not set
-
-# netdrv
-
-CONFIG_NET_VENDOR_MELLANOX=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_NET_VENDOR_XIRCOM is not set
-# CONFIG_TLAN is not set
-
-# scsi
-
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_FUSION is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-
-# serial
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-
-# drm
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_MSM_DSI is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-# CONFIG_BMP085_SPI is not set
-# CONFIG_TI_DAC7512 is not set
-
-# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
-CONFIG_CHECKPOINT_RESTORE=y
-
-# Bad Intel shit we don't care about
-# CONFIG_PINCTRL_BAYTRAIL is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_SUNRISEPOINT is not set

config-arm64

@@ -1,180 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARM64=y
-
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_SMT=y
-
-# CONFIG_CPU_BIG_ENDIAN is not set
-
-# arm64 only SoCs
-CONFIG_ARCH_HISI=y
-CONFIG_ARCH_SEATTLE=y
-CONFIG_ARCH_XGENE=y
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_EXYNOS7 is not set
-# CONFIG_ARCH_FSL_LS2085A is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCH_UNIPHIER is not set
-
-# Erratum
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_ERRATUM_834220=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-
-# AMBA / VExpress
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_AMBA_PL08X is not set
-CONFIG_ARM_SMMU_V3=y
-
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARM64_64K_PAGES=y
-
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_LSE_ATOMICS=y
-
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_BRCMUTIL=m
-CONFIG_BUG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CMDLINE="console=ttyAMA0"
-# CONFIG_CMDLINE_FORCE is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-
-CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
-CONFIG_HVC_DRIVER=y
-# CONFIG_HVC_DCC is not set
-CONFIG_HZ=100
-
-CONFIG_KVM=y
-CONFIG_KVM_ARM_MAX_VCPUS=16
-
-CONFIG_RCU_FANOUT=64
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-
-# CONFIG_SYS_HYPERVISOR is not set
-
-CONFIG_RTC_DRV_EFI=y
-
-CONFIG_ACPI=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_EC_DEBUGFS=y
-CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_FAN=m
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_IPMI=y
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_CUSTOM_METHOD=m
-CONFIG_ACPI_NFIT=m
-# CONFIG_ACPI_NFIT_DEBUG is not set
-CONFIG_PCC=y
-CONFIG_ACPI_CPPC_CPUFREQ=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_I2C_SCMI=m
-CONFIG_SENSORS_ACPI_POWER=m
-
-CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
-CONFIG_CRYPTO_CRC32_ARM64=m
-CONFIG_CRYPTO_DEV_CCP=y
-CONFIG_CRYPTO_DEV_CCP_DD=m
-CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
-
-# APM Xgene
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_COMMON_CLK_XGENE=y
-CONFIG_AHCI_XGENE=y
-CONFIG_PHY_XGENE=y
-CONFIG_NET_XGENE=m
-CONFIG_RTC_DRV_XGENE=m
-CONFIG_HW_RANDOM_XGENE=m
-CONFIG_GPIO_XGENE=y
-CONFIG_GPIO_XGENE_SB=m
-CONFIG_XGENE_DMA=m
-CONFIG_EDAC_XGENE=m
-CONFIG_PCI_XGENE=y
-CONFIG_PCI_XGENE_MSI=y
-CONFIG_I2C_XGENE_SLIMPRO=m
-
-# AMD Seattle
-CONFIG_NET_SB1000=y
-CONFIG_AMD_XGBE=m
-CONFIG_AMD_XGBE_PHY=m
-CONFIG_AMD_XGBE_DCB=y
-CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m
-CONFIG_PINCTRL_AMD=y
-
-# HiSilicon
-CONFIG_HISILICON_IRQ_MBIGEN=y
-CONFIG_PCI_HISI=y
-CONFIG_POWER_RESET_HISI=y
-CONFIG_HISI_THERMAL=m
-CONFIG_STUB_CLK_HI6220=y
-CONFIG_PHY_HI6220_USB=m
-CONFIG_COMMON_RESET_HI6220=m
-
-# ThunderX
-# CONFIG_MDIO_OCTEON is not set
-
-CONFIG_DMI=y
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=y
-
-CONFIG_SATA_AHCI_PLATFORM=y
-
-CONFIG_LIBNVDIMM=m
-CONFIG_BTT=y
-CONFIG_ND_BTT=m
-CONFIG_ND_BLK=m
-
-# CONFIG_PMIC_OPREGION is not set
-# CONFIG_DEBUG_RODATA is not set
-
-CONFIG_DEBUG_SECTION_MISMATCH=y
-
-# CONFIG_SND_SOC is not set
-
-# busted build for various reasons
-#  uses pci_* for some reason to allocate DMA buffers
-# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
-#  weird include chain resulting in missing u64 type
-# CONFIG_USB_SPEEDTOUCH is not set
-#  dma issues in headers
-# CONFIG_PARPORT_PC is not set
-# CONFIG_VGA_CONSOLE is not set
-
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_PNP_DEBUG_MESSAGES is not set

config-armv7

@@ -1,655 +0,0 @@
-# ARM unified arch kernel
-
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_KEYSTONE is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_U8500=y
-CONFIG_ARCH_ZYNQ=y
-
-# These are supported in the LPAE kernel
-# CONFIG_ARM_LPAE is not set
-# CONFIG_XEN is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_VIRTUALIZATION is not set
-
-# omap 
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-CONFIG_SOC_OMAP5=y
-# CONFIG_SOC_DRA7XX is not set
-CONFIG_SOC_OMAP3430=y
-# CONFIG_SOC_TI81XX is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-
-CONFIG_SOC_HAS_REALTIME_COUNTER=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_PACKAGE_CBB=y
-CONFIG_OMAP_PACKAGE_CUS=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-
-CONFIG_OMAP2PLUS_MBOX=m
-CONFIG_OMAP_MBOX_KFIFO_SIZE=256
-CONFIG_DMA_OMAP=m
-CONFIG_OMAP_IOMMU=y
-CONFIG_HWSPINLOCK_OMAP=m
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-# CONFIG_PHY_DM816X_USB is not set
-
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-CONFIG_SERIAL_8250_OMAP=m
-
-# Needed by omap_hsmmc for card detect on at least the am33xx (BBone) platforms (changed in 4.2)
-CONFIG_GPIO_OMAP=y
-CONFIG_GPIO_TWL4030=m
-CONFIG_GPIO_TWL6040=m
-CONFIG_I2C_OMAP=m
-CONFIG_CHARGER_TWL4030=m
-CONFIG_CHARGER_ISP1704=m
-CONFIG_CHARGER_BQ2415X=m
-CONFIG_OMAP_WATCHDOG=m
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_MADC=m
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_WATCHDOG=m
-CONFIG_BATTERY_TWL4030_MADC=m
-CONFIG_BATTERY_BQ27XXX=m
-CONFIG_BATTERY_BQ27XXX_I2C=y
-CONFIG_BATTERY_BQ27XXX_PLATFORM=y
-CONFIG_OMAP_USB2=m
-CONFIG_OMAP_CONTROL_PHY=m
-CONFIG_TI_PIPE3=m
-CONFIG_PCI_DRA7XX=y
-CONFIG_TWL4030_USB=m
-CONFIG_TWL6030_USB=m
-CONFIG_TWL6040_CORE=y
-CONFIG_CLK_TWL6040=m
-CONFIG_OMAP_INTERCONNECT=m
-CONFIG_MFD_OMAP_USB_HOST=y
-CONFIG_HDQ_MASTER_OMAP=m
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_BACKLIGHT_PANDORA=m
-CONFIG_OMAP_OCP2SCP=m
-CONFIG_USB_EHCI_HCD_OMAP=m
-CONFIG_USB_OHCI_HCD_OMAP3=m
-CONFIG_USB_MUSB_AM35X=m
-CONFIG_USB_MUSB_OMAP2PLUS=m
-CONFIG_USB_INVENTRA_DMA=y
-CONFIG_USB_DWC3_OMAP=m
-CONFIG_MMC_OMAP=m
-CONFIG_RTC_DRV_MAX8907=m
-# CONFIG_RTC_DRV_TWL92330 is not set
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_SENSORS_TWL4030_MADC=m
-CONFIG_TWL6030_GPADC=m
-CONFIG_BATTERY_RX51=m
-# CONFIG_IR_RX51 is not set
-
-# OMAP5 (possibly other devices too)
-CONFIG_MFD_PALMAS=y
-CONFIG_EXTCON_PALMAS=m
-CONFIG_GPIO_PALMAS=y
-CONFIG_PINCTRL_PALMAS=y
-CONFIG_REGULATOR_PALMAS=y
-CONFIG_REGULATOR_PBIAS=m
-CONFIG_RTC_DRV_PALMAS=m
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_COMMON_CLK_PALMAS=m
-CONFIG_INPUT_PALMAS_PWRBUTTON=m
-CONFIG_PALMAS_GPADC=m
-
-CONFIG_MFD_WL1273_CORE=m
-CONFIG_NFC_WILINK=m
-
-CONFIG_MTD_ONENAND_OMAP2=m
-CONFIG_MTD_NAND_OMAP2=m
-CONFIG_MTD_NAND_OMAP_BCH=y
-CONFIG_SPI_OMAP24XX=m
-CONFIG_SPI_TI_QSPI=m
-
-CONFIG_INPUT_TWL4030_PWRBUTTON=m
-CONFIG_INPUT_TWL4030_VIBRA=m
-CONFIG_INPUT_TWL6040_VIBRA=m
-CONFIG_KEYBOARD_OMAP4=m
-CONFIG_KEYBOARD_TWL4030=m
-CONFIG_LEDS_TCA6507=m
-
-# OMAP thermal temp.
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_THERMAL=y
-
-# OMAP3 thermal/power
-CONFIG_POWER_AVS=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
-# CPUFREQ_CPU0 is used for scaling on DT OMAP
-# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
-
-CONFIG_PWM_TIECAP=m
-CONFIG_PWM_TIEHRPWM=m
-CONFIG_PWM_TWL=m
-CONFIG_PWM_TWL_LED=m
-CONFIG_PWM_OMAP_DMTIMER=m
-
-CONFIG_CRYPTO_DEV_OMAP_SHAM=m
-CONFIG_CRYPTO_DEV_OMAP_AES=m
-CONFIG_CRYPTO_DEV_OMAP_DES=m
-CONFIG_HW_RANDOM_OMAP=m
-CONFIG_HW_RANDOM_OMAP3_ROM=m
-
-CONFIG_DRM_OMAP=m
-CONFIG_DRM_OMAP_NUM_CRTCS=2
-CONFIG_OMAP2_VRFB=y
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_DA8XX is not set
-
-CONFIG_OMAP2_DSS=m
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_RFBI=y
-CONFIG_OMAP2_DSS_VENC=y
-CONFIG_OMAP4_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
-
-CONFIG_DISPLAY_ENCODER_OPA362=m
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
-CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
-
-# Enable V4L2 drivers for OMAP2+
-CONFIG_V4L_PLATFORM_DRIVERS=y
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-CONFIG_VIDEO_OMAP3=m
-CONFIG_VIDEO_ADP1653=m
-# CONFIG_VIDEO_OMAP4 is not set
-# The ones below are for TI Davinci
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DM355_CCDC is not set
-
-CONFIG_SND_OMAP_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-CONFIG_SND_OMAP_SOC_AM3517EVM=m
-CONFIG_SND_OMAP_SOC_DMIC=m
-CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
-CONFIG_SND_OMAP_SOC_MCBSP=m
-CONFIG_SND_OMAP_SOC_MCPDM=m
-CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
-CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
-CONFIG_SND_OMAP_SOC_RX51=m
-CONFIG_SND_SOC_TLV320AIC23=m
-CONFIG_SND_SOC_TLV320AIC23_I2C=m
-CONFIG_SND_SOC_TLV320AIC23_SPI=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-CONFIG_SND_SOC_TLV320AIC31XX=m
-CONFIG_SND_SOC_TPA6130A2=m
-CONFIG_SND_SOC_TWL4030=m
-CONFIG_SND_SOC_TWL6040=m
-CONFIG_SND_SOC_PCM1792A=m
-CONFIG_RADIO_WL128X=m
-
-CONFIG_OMAP_REMOTEPROC=m
-
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP_IOMMU_DEBUG is not set
-# CONFIG_OMAP_MUX_DEBUG is not set
-# CONFIG_VIDEO_OMAP3_DEBUG is not set
-
-# AM33xx/43xx
-CONFIG_SOC_AM33XX=y
-CONFIG_SOC_AM43XX=y
-CONFIG_AM335X_CONTROL_USB=m
-CONFIG_AM335X_PHY_USB=m
-CONFIG_USB_MUSB_AM335X_CHILD=m
-CONFIG_TI_CPPI41=m
-CONFIG_USB_TI_CPPI41_DMA=y
-CONFIG_MFD_TI_AM335X_TSCADC=m
-CONFIG_TI_ST=m
-CONFIG_TI_DAC7512=m
-CONFIG_TI_DAVINCI_CPDMA=m
-CONFIG_TI_DAVINCI_EMAC=m
-CONFIG_TI_DAVINCI_MDIO=m
-CONFIG_TI_CPSW=m
-CONFIG_TI_CPSW_PHY_SEL=y
-CONFIG_TI_CPSW_ALE=m
-CONFIG_TI_CPTS=y
-CONFIG_TI_EMIF=m
-CONFIG_DRM_TILCDC=m
-# We only need this until the BBB dts is actually updated
-CONFIG_DRM_TILCDC_SLAVE_COMPAT=y
-CONFIG_SPI_DAVINCI=m
-CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_I2S=m
-CONFIG_SND_DAVINCI_SOC_MCASP=m
-CONFIG_SND_DAVINCI_SOC_VCIF=m
-CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m
-CONFIG_SND_EDMA_SOC=m
-CONFIG_SND_AM33XX_SOC_EVM=m
-CONFIG_REGULATOR_TI_ABB=m
-CONFIG_TI_ADC081C=m
-CONFIG_TI_AM335X_ADC=m
-CONFIG_PWM_TIPWMSS=y
-CONFIG_MFD_TPS65218=m
-CONFIG_REGULATOR_TPS65218=m
-CONFIG_INPUT_TPS65218_PWRBUTTON=m
-CONFIG_VIDEO_AM437X_VPFE=m
-CONFIG_UIO_PRUSS=m
-CONFIG_WKUP_M3_RPROC=m
-
-# Builtin needed for BBone White
-CONFIG_MFD_TPS65217=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_CHARGER_TPS65217=m
-CONFIG_BACKLIGHT_TPS65217=m
-CONFIG_REGULATOR_TPS65217=m
-
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
-
-# QCom
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_PINCTRL_APQ8064=m
-CONFIG_PINCTRL_APQ8084=m
-CONFIG_PINCTRL_IPQ8064=m
-CONFIG_PINCTRL_MSM8660=m
-CONFIG_PINCTRL_MSM8960=m
-CONFIG_PINCTRL_MSM8X74=m
-CONFIG_PINCTRL_MSM8916=m
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
-CONFIG_PINCTRL_QCOM_SSBI_PMIC=m
-CONFIG_COMMON_CLK_QCOM=m
-# CONFIG_MSM_GCC_8916 is not set
-# CONFIG_IPQ_LCC_806X is not set
-# CONFIG_MSM_LCC_8960 is not set
-CONFIG_MFD_QCOM_RPM=m
-CONFIG_MFD_PM8921_CORE=m
-CONFIG_REGULATOR_QCOM_RPM=m
-CONFIG_REGULATOR_QCOM_SPMI=m
-CONFIG_APQ_GCC_8084=m
-CONFIG_APQ_MMCC_8084=m
-CONFIG_IPQ_GCC_806X=m
-CONFIG_MSM_GCC_8660=m
-CONFIG_MSM_GCC_8960=m
-CONFIG_MSM_MMCC_8960=m
-CONFIG_MSM_GCC_8974=m
-CONFIG_MSM_MMCC_8974=m
-CONFIG_MSM_GCC_8996=m
-CONFIG_MSM_MMCC_8996=m
-CONFIG_HW_RANDOM_MSM=m
-CONFIG_I2C_QUP=m
-CONFIG_SPI_QUP=m
-CONFIG_GPIO_MSM_V2=m
-CONFIG_POWER_RESET_MSM=y
-CONFIG_USB_MSM_OTG=m
-CONFIG_MMC_SDHCI_MSM=m
-CONFIG_MMC_QCOM_DML=m
-CONFIG_QCOM_BAM_DMA=m
-CONFIG_QCOM_GSBI=m
-CONFIG_QCOM_PM=y
-CONFIG_PHY_QCOM_APQ8064_SATA=m
-CONFIG_PHY_QCOM_IPQ806X_SATA=m
-CONFIG_USB_DWC3_QCOM=m
-CONFIG_DWMAC_IPQ806X=m
-CONFIG_CRYPTO_DEV_QCE=m
-CONFIG_DRM_MSM=m
-CONFIG_DRM_MSM_FBDEV=y
-CONFIG_USB_EHCI_MSM=m
-CONFIG_MFD_PM8XXX=m
-CONFIG_KEYBOARD_PMIC8XXX=m
-CONFIG_INPUT_PM8XXX_VIBRATOR=m
-CONFIG_INPUT_PMIC8XXX_PWRKEY=m
-CONFIG_INPUT_PM8941_PWRKEY=m
-CONFIG_RTC_DRV_PM8XXX=m
-# CONFIG_DRM_MSM_REGISTER_LOGGING is not set 
-CONFIG_QCOM_WDT=m
-CONFIG_MFD_SPMI_PMIC=m
-CONFIG_SPMI=m
-CONFIG_SPMI_MSM_PMIC_ARB=m
-CONFIG_QCOM_SPMI_IADC=m
-CONFIG_QCOM_SPMI_VADC=m
-CONFIG_LEDS_PM8941_WLED=m
-CONFIG_SND_SOC_QCOM=m
-CONFIG_SND_SOC_LPASS_CPU=m
-CONFIG_SND_SOC_LPASS_PLATFORM=m
-CONFIG_SND_SOC_STORM=m
-CONFIG_PHY_QCOM_UFS=m
-CONFIG_HWSPINLOCK_QCOM=m
-CONFIG_QCOM_COINCELL=m
-CONFIG_USB_QCOM_8X16_PHY=m
-CONFIG_QCOM_SMD=m
-CONFIG_QCOM_SMD_RPM=m
-CONFIG_QCOM_SMEM=m
-CONFIG_REGULATOR_QCOM_SMD_RPM=m
-CONFIG_QCOM_SMEM=m
-CONFIG_QCOM_QFPROM=m
-CONFIG_QCOM_WCNSS_CTRL=m
-CONFIG_QCOM_SMSM=y
-CONFIG_QCOM_SMP2P=m
-CONFIG_PCIE_QCOM=y
-
-# i.MX
-# CONFIG_MXC_DEBUG_BOARD is not set
-CONFIG_SOC_IMX50=y
-CONFIG_SOC_IMX51=y
-CONFIG_SOC_IMX53=y
-CONFIG_SOC_IMX6=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-CONFIG_SOC_IMX6SX=y
-CONFIG_SOC_IMX6UL=y
-CONFIG_SOC_IMX7D=y
-# CONFIG_SOC_LS1021A is not set
-# CONFIG_SOC_VF610 is not set
-CONFIG_ARM_IMX6Q_CPUFREQ=m
-CONFIG_POWER_RESET_IMX=y
-CONFIG_PCI_IMX6=y
-CONFIG_IMX_THERMAL=m
-CONFIG_IMX_SDMA=m
-CONFIG_IMX_DMA=m
-CONFIG_MXS_DMA=y
-CONFIG_AHCI_IMX=m
-CONFIG_PATA_IMX=m
-CONFIG_USB_EHCI_MXC=m
-CONFIG_USB_CHIPIDEA=m
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_FSL_USB2=m
-CONFIG_NET_VENDOR_FREESCALE=y
-# CONFIG_GIANFAR is not set
-CONFIG_FEC=m
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_KEYBOARD_SNVS_PWRKEY=m
-CONFIG_KEYBOARD_IMX=m
-CONFIG_KEYBOARD_STMPE=m
-CONFIG_TOUCHSCREEN_STMPE=m
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_PINCTRL_IMX6SL=y
-CONFIG_I2C_IMX=m
-CONFIG_STMPE_I2C=y
-CONFIG_SPI_IMX=m
-CONFIG_SPI_FSL_QUADSPI=m
-CONFIG_STMPE_SPI=y
-CONFIG_MFD_MC13XXX_SPI=m
-CONFIG_MFD_STMPE=y
-CONFIG_MTD_NAND_GPMI_NAND=m
-CONFIG_W1_MASTER_MXC=m
-CONFIG_IMX_WEIM=y
-CONFIG_IMX2_WDT=m
-CONFIG_HW_RANDOM_MXC_RNGA=m
-CONFIG_CRYPTO_DEV_SAHARA=m
-CONFIG_CRYPTO_DEV_FSL_CAAM=m
-CONFIG_CRYPTO_DEV_FSL_CAAM_JR=m
-CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=3
-CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=8
-CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=8192
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=m
-CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=m
-CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=m
-# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-CONFIG_RTC_DRV_SNVS=m
-CONFIG_FB_MXS=m
-# CONFIG_FB_MX3 is not set
-# CONFIG_FB_IMX is not set
-CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
-CONFIG_NVMEM_IMX_OCOTP=m
-
-CONFIG_SND_IMX_SOC=m
-CONFIG_SND_SOC_FSL_ASOC_CARD=m
-CONFIG_SND_SOC_FSL_ASRC=m
-CONFIG_SND_SOC_FSL_ESAI=m
-CONFIG_SND_SOC_FSL_SAI=m
-CONFIG_SND_SOC_FSL_SPDIF=m
-CONFIG_SND_SOC_FSL_SSI=m
-CONFIG_SND_SOC_FSL_UTILS=m
-CONFIG_SND_SOC_IMX_SSI=m
-CONFIG_SND_SOC_IMX_AUDMUX=m
-CONFIG_SND_SOC_IMX_ES8328=m
-CONFIG_SND_SOC_IMX_PCM_FIQ=m
-CONFIG_SND_SOC_IMX_PCM_DMA=m
-CONFIG_SND_SOC_IMX_SGTL5000=m
-CONFIG_SND_SOC_IMX_WM8962=m
-CONFIG_SND_SOC_IMX_MC13783=m
-CONFIG_SND_SOC_IMX_SPDIF=m
-CONFIG_SND_SOC_CS42XX8_I2C=m
-CONFIG_SND_SOC_ES8328=m
-CONFIG_SND_SOC_ES8328_I2C=m
-CONFIG_SND_SOC_ES8328_SPI=m
-CONFIG_SND_SOC_EUKREA_TLV320=m
-CONFIG_SND_SOC_SGTL5000=m
-CONFIG_SND_SOC_WM8731=m
-CONFIG_SND_SOC_WM8962=m
-
-CONFIG_USB_IMX21_HCD=m
-CONFIG_USB_MXS_PHY=m
-CONFIG_MMC_SDHCI_ESDHC_IMX=m
-CONFIG_MMC_MXC=m
-CONFIG_SPI_MXS=m
-CONFIG_RTC_DRV_IMXDI=m
-CONFIG_RTC_DRV_MXC=m
-# CONFIG_MX3_IPU is not set
-# CONFIG_MX3_IPU_IRQS is not set
-
-CONFIG_PWM_IMX=m
-CONFIG_DRM_IMX=m
-CONFIG_DRM_IMX_FB_HELPER=m
-CONFIG_DRM_IMX_HDMI=m
-CONFIG_IMX_IPUV3_CORE=m
-CONFIG_DRM_IMX_IPUV3=m
-CONFIG_DRM_IMX_LDB=m
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
-CONFIG_DRM_IMX_TVE=m
-CONFIG_DRM_ETNAVIV=m
-# CONFIG_DRM_ETNAVIV_REGISTER_LOGGING is not set
-CONFIG_VIDEO_CODA=m
-
-CONFIG_IMX7D_ADC=m
-CONFIG_SENSORS_MC13783_ADC=m
-CONFIG_REGULATOR_ANATOP=m
-CONFIG_REGULATOR_MC13783=m
-CONFIG_REGULATOR_MC13892=m
-CONFIG_LEDS_MC13783=m
-CONFIG_RTC_DRV_MC13XXX=m
-CONFIG_CAN_FLEXCAN=m
-
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_INPUT_88PM80X_ONKEY=m
-
-# i.MX6Q (and likely Samsung among others) 
-CONFIG_MFD_DA9052_I2C=y
-CONFIG_MFD_DA9052_SPI=y
-CONFIG_MFD_DA9055=y
-CONFIG_TOUCHSCREEN_DA9052=m
-CONFIG_INPUT_DA9052_ONKEY=m
-CONFIG_INPUT_DA9055_ONKEY=m
-CONFIG_GPIO_DA9052=m
-CONFIG_GPIO_DA9055=m
-CONFIG_GPIO_STMPE=y
-CONFIG_BATTERY_DA9052=m
-CONFIG_SENSORS_DA9052_ADC=m
-CONFIG_SENSORS_DA9055=m
-CONFIG_DA9052_WATCHDOG=m
-CONFIG_DA9055_WATCHDOG=m
-CONFIG_BACKLIGHT_DA9052=m
-CONFIG_LEDS_DA9052=m
-CONFIG_RTC_DRV_DA9052=m
-CONFIG_RTC_DRV_DA9055=m
-CONFIG_REGULATOR_DA9052=m
-CONFIG_REGULATOR_DA9055=m
-
-# picoxcell
-# CONFIG_CRYPTO_DEV_PICOXCELL is not set
-
-# Exynos 4
-CONFIG_ARCH_EXYNOS4=y
-CONFIG_SOC_EXYNOS4212=y
-CONFIG_SOC_EXYNOS4412=y
-CONFIG_SOC_EXYNOS4415=y
-CONFIG_AK8975=m
-CONFIG_CM36651=m
-CONFIG_KEYBOARD_SAMSUNG=m
-
-# ST Ericsson
-CONFIG_MACH_HREFV60=y
-CONFIG_MACH_SNOWBALL=y
-
-CONFIG_ABX500_CORE=y
-# CONFIG_ARM_U8500_CPUIDLE is not set
-CONFIG_UX500_DEBUG_UART=2
-CONFIG_AB8500_CORE=y
-CONFIG_STE_DMA40=y
-CONFIG_HSEM_U8500=m
-CONFIG_PINCTRL_ABX500=y
-CONFIG_PINCTRL_AB8500=y
-CONFIG_I2C_NOMADIK=m
-CONFIG_KEYBOARD_NOMADIK=m
-CONFIG_DB8500_CPUFREQ_COOLING=m
-CONFIG_DB8500_THERMAL=y
-CONFIG_UX500_WATCHDOG=m
-CONFIG_AHCI_ST=m
-CONFIG_INPUT_AB8500_PONKEY=m
-CONFIG_REGULATOR_AB8500=y
-CONFIG_AB8500_USB=m
-CONFIG_USB_MUSB_UX500=m
-# CONFIG_USB_UX500_DMA is not set
-CONFIG_RTC_DRV_AB8500=m
-CONFIG_PWM_AB8500=m
-CONFIG_SND_SOC_UX500=m
-CONFIG_SND_SOC_UX500_PLAT_DMA=m
-CONFIG_SND_SOC_UX500_MACH_MOP500=m
-CONFIG_CLKSRC_DBX500_PRCMU=y
-CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK=y
-CONFIG_CRYPTO_DEV_UX500=m
-CONFIG_CRYPTO_DEV_UX500_CRYP=m
-CONFIG_CRYPTO_DEV_UX500_HASH=m
-CONFIG_SENSORS_LIS3_I2C=m
-CONFIG_AB8500_BM=y
-CONFIG_AB8500_GPADC=y
-CONFIG_SENSORS_AB8500=m
-CONFIG_STE_MODEM_RPROC=m
-CONFIG_STIH415_RESET=y
-
-# Allwinner
-CONFIG_MACH_SUN4I=y
-CONFIG_MACH_SUN5I=y
-
-# Tegra (non A15)
-CONFIG_ARCH_TEGRA_2x_SOC=y
-CONFIG_ARCH_TEGRA_3x_SOC=y
-CONFIG_TEGRA20_MC=y
-CONFIG_TEGRA_IOMMU_GART=y
-CONFIG_SPI_TEGRA20_SFLASH=m
-CONFIG_SPI_TEGRA20_SLINK=m
-CONFIG_MFD_MAX8907=m
-CONFIG_SND_SOC_TEGRA_ALC5632=m
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
-CONFIG_SND_SOC_TEGRA_WM8753=m
-CONFIG_SND_SOC_TEGRA_WM8903=m
-CONFIG_SND_SOC_TEGRA_WM9712=m
-CONFIG_SND_SOC_TEGRA20_AC97=m
-CONFIG_SND_SOC_TEGRA20_DAS=m
-CONFIG_SND_SOC_TEGRA20_SPDIF=m
-
-# AC100 (PAZ00)
-CONFIG_MFD_NVEC=y
-CONFIG_MFD_TPS80031=y
-CONFIG_KEYBOARD_NVEC=y
-CONFIG_SERIO_NVEC_PS2=y
-CONFIG_NVEC_POWER=y
-CONFIG_NVEC_PAZ00=y
-CONFIG_MFD_TPS6586X=y
-CONFIG_GPIO_TPS6586X=y
-CONFIG_RTC_DRV_TPS6586X=m
-
-# OLPC XO
-CONFIG_SERIO_OLPC_APSP=m
-
-# Zynq-7xxx
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_COMMON_CLK_AXI_CLKGEN=m
-CONFIG_COMMON_CLK_SI570=m
-CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
-# CONFIG_ARM_ZYNQ_CPUIDLE is not set
-CONFIG_LATTICE_ECP3_CONFIG=m
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_XILINX_EMACLITE=m
-CONFIG_GPIO_XILINX=y
-CONFIG_GPIO_ZYNQ=m
-CONFIG_I2C_XILINX=m
-CONFIG_SPI_XILINX=m
-CONFIG_SPI_CADENCE=m
-CONFIG_I2C_CADENCE=m
-CONFIG_XILINX_WATCHDOG=m
-CONFIG_XILINX_XADC=m
-CONFIG_XILINX_VDMA=m
-CONFIG_SND_SOC_ADI=m
-CONFIG_SND_SOC_ADI_AXI_I2S=m
-CONFIG_SND_SOC_ADI_AXI_SPDIF=m
-CONFIG_XILLYBUS=m
-CONFIG_XILLYBUS_PCIE=m
-CONFIG_XILLYBUS_OF=m
-CONFIG_GS_FPGABOOT=m
-CONFIG_USB_GADGET_XILINX=m
-CONFIG_PCIE_XILINX=y
-CONFIG_CADENCE_WATCHDOG=m
-CONFIG_REGULATOR_ISL9305=m
-CONFIG_EDAC_SYNOPSYS=m
-CONFIG_PINCTRL_ZYNQ=y
-CONFIG_AXI_DMAC=m
-
-# Multi function devices
-CONFIG_MFD_88PM800=m
-CONFIG_MFD_88PM805=m
-CONFIG_MFD_T7L66XB=y
-CONFIG_MFD_TC6387XB=y
-
-# Generic drivers
-CONFIG_REMOTEPROC=m
-
-# Regulator drivers
-CONFIG_REGULATOR_FAN53555=m
-# CONFIG_REGULATOR_88PM800 is not set
-CONFIG_REGULATOR_AD5398=m
-CONFIG_REGULATOR_ISL6271A=m
-CONFIG_REGULATOR_LP3971=m
-CONFIG_REGULATOR_LP3972=m
-CONFIG_REGULATOR_LP872X=y
-CONFIG_REGULATOR_LP8755=m
-CONFIG_REGULATOR_MAX1586=m
-CONFIG_REGULATOR_MAX8649=m
-CONFIG_REGULATOR_MAX8660=m
-CONFIG_REGULATOR_MAX8907=m
-CONFIG_REGULATOR_MAX8952=m

config-armv7-generic

@@ -1,870 +0,0 @@
-# arm configs for sharing between armv7 and armv7-lpae
-# Generic ARM config options
-CONFIG_ARM=y
-
-# CONFIG_ARCH_MULTI_V6 is not set
-CONFIG_ARCH_MULTI_V7=y
-
-CONFIG_CMDLINE=""
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_AEABI=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-CONFIG_IWMMXT=y
-
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ASM_UNIFIED=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_CPU_TOPOLOGY=y
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_SWP_EMULATE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_HIGHPTE=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_ATAGS=y
-CONFIG_ATAGS_PROC=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_IRQ_CROSSBAR=y
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-CONFIG_CPU_SW_DOMAIN_PAN=y
-
-# CONFIG_MCPM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_DMA_CACHE_RWFO is not set
-# CONFIG_THUMB2_KERNEL is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_ARM_VIRT_EXT is not set
-
-# Platforms enabled/disabled globally on ARMv7
-CONFIG_ARCH_EXYNOS=y
-CONFIG_ARCH_HIGHBANK=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
-CONFIG_ARCH_VIRT=y
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHMOBILE_MULTI is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_VEXPRESS_SPC is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_SOC_BRCMSTB is not set
-
-# errata
-# v5/v6
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# Cortex-A8
-CONFIG_ARM_ERRATA_430973=y
-# The following two don't work with MP
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# Cortex-A9
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_742230=y
-CONFIG_ARM_ERRATA_742231=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-# Disabled due to causing highbank to crash
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PJ4B_ERRATA_4742=y
-# Cortex-A15
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-
-# generic that deviates from or should be merged into config-generic
-CONFIG_SMP_ON_UP=y
-CONFIG_HIGHMEM=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ARM_MODULE_PLTS is not set
-
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_SMT=y
-
-CONFIG_RCU_FANOUT=32
-
-CONFIG_CHECKPOINT_RESTORE=y
-
-# Power management / thermal / cpu scaling
-CONFIG_PM_OPP=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_PSCI=y
-CONFIG_THERMAL=y
-CONFIG_CLOCK_THERMAL=y
-# CONFIG_DEVFREQ_THERMAL is not set
-CONFIG_CPUFREQ_DT=m
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-CONFIG_PM_DEVFREQ=y
-CONFIG_PM_DEVFREQ_EVENT=y
-CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_LSM_MMAP_MIN_ADDR=32768
-
-CONFIG_XZ_DEC_ARM=y
-
-CONFIG_PCI_HOST_GENERIC=y
-# CONFIG_PCI_LAYERSCAPE is not set
-# Do NOT enable this, it breaks stuff and makes things go slow
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-CONFIG_LBDAF=y
-
-# GRR, needed for MFD_AS3722
-CONFIG_I2C=y
-
-# Device tree
-CONFIG_USE_OF=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_APPENDED_DTB=y
-
-# General vexpress ARM drivers
-CONFIG_SERIO_AMBAKMI=m
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-
-CONFIG_RTC_DRV_PL030=y
-CONFIG_AMBA_PL08X=y
-CONFIG_SND_ARMAACI=m
-
-CONFIG_EDAC=y
-
-# highbank
-CONFIG_EDAC_HIGHBANK_MC=m
-CONFIG_EDAC_HIGHBANK_L2=m
-CONFIG_SATA_HIGHBANK=m
-CONFIG_ARM_HIGHBANK_CPUFREQ=m
-# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
-CONFIG_PL320_MBOX=y
-CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
-
-# AllWinner
-# CONFIG_MACH_SUN4I is not set
-# CONFIG_MACH_SUN5I is not set
-CONFIG_MACH_SUN6I=y
-CONFIG_MACH_SUN7I=y
-CONFIG_MACH_SUN8I=y
-# CONFIG_MACH_SUN9I is not set
-CONFIG_SUNXI_SRAM=y
-CONFIG_DMA_SUN4I=m
-CONFIG_DMA_SUN6I=m
-CONFIG_SUNXI_WATCHDOG=m
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_EEPROM_SUNXI_SID=m
-CONFIG_RTC_DRV_SUNXI=m
-CONFIG_PHY_SUN4I_USB=m
-# CONFIG_PHY_SUN9I_USB is not set
-CONFIG_AHCI_SUNXI=m
-CONFIG_SPI_SUN4I=m
-CONFIG_SPI_SUN6I=m
-CONFIG_MMC_SUNXI=m
-CONFIG_I2C_SUN6I_P2WI=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_TOUCHSCREEN_SUN4I=m
-CONFIG_MFD_AXP20X=y
-CONFIG_AXP20X_POWER=m
-CONFIG_INPUT_AXP20X_PEK=m
-CONFIG_REGULATOR_AXP20X=m
-CONFIG_AXP288_FUEL_GAUGE=m
-CONFIG_AXP288_ADC=m
-CONFIG_EXTCON_AXP288=m
-CONFIG_AXP288_CHARGER=m
-CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
-CONFIG_IR_SUNXI=m
-CONFIG_MDIO_SUN4I=m
-CONFIG_DWMAC_SUNXI=m
-CONFIG_SUN4I_EMAC=m
-CONFIG_RTC_DRV_SUN6I=m
-CONFIG_MTD_NAND_SUNXI=m
-CONFIG_SERIO_SUN4I_PS2=m
-CONFIG_KEYBOARD_SUN4I_LRADC=m
-CONFIG_PWM_SUN4I=m
-CONFIG_USB_MUSB_SUNXI=m
-CONFIG_CRYPTO_DEV_SUN4I_SS=m
-CONFIG_SND_SUN4I_CODEC=m
-CONFIG_SUNXI_RSB=m
-CONFIG_NVMEM_SUNXI_SID=m
-
-# Exynos
-CONFIG_ARCH_EXYNOS3=y
-# CONFIG_ARCH_EXYNOS4 is not set
-CONFIG_ARCH_EXYNOS5=y
-CONFIG_SOC_EXYNOS3250=y
-CONFIG_SOC_EXYNOS5250=y
-CONFIG_SOC_EXYNOS5420=y
-CONFIG_SOC_EXYNOS5440=y
-CONFIG_SOC_EXYNOS5260=y
-CONFIG_SOC_EXYNOS5410=y
-CONFIG_SOC_EXYNOS5800=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_ARM_EXYNOS5440_CPUFREQ=m
-CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW=y
-# CONFIG_ARM_EXYNOS_CPUIDLE is not set
-CONFIG_ARM_EXYNOS5_BUS_DEVFREQ=m
-# CONFIG_EXYNOS5420_MCPM not set
-CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
-
-CONFIG_I2C_EXYNOS5=m
-CONFIG_I2C_S3C2410=m
-CONFIG_SPI_S3C64XX=m
-CONFIG_EXYNOS_THERMAL=m
-CONFIG_EXYNOS_ADC=m
-CONFIG_MMC_SDHCI_S3C=m
-CONFIG_MMC_SDHCI_S3C_DMA=y
-CONFIG_MMC_DW_EXYNOS=m
-# CONFIG_EXYNOS_IOMMU is not set
-CONFIG_PCI_EXYNOS=y
-CONFIG_PHY_EXYNOS5_USBDRD=m
-CONFIG_PHY_SAMSUNG_USB2=m
-CONFIG_USB_EHCI_EXYNOS=m
-CONFIG_USB_OHCI_EXYNOS=m
-CONFIG_USB_DWC3_EXYNOS=m
-CONFIG_PHY_EXYNOS5250_SATA=m
-CONFIG_HW_RANDOM_EXYNOS=m
-CONFIG_CRYPTO_DEV_S5P=m
-CONFIG_PWM_SAMSUNG=m
-CONFIG_S3C2410_WATCHDOG=m
-CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR_S2MPS11=m
-CONFIG_REGULATOR_S5M8767=m
-CONFIG_TCG_TIS_I2C_INFINEON=m
-CONFIG_RTC_DRV_S5M=m
-CONFIG_RTC_DRV_S3C=m
-CONFIG_MFD_WM8994=m
-CONFIG_GPIO_WM8994=m
-CONFIG_REGULATOR_WM8994=m
-
-CONFIG_EXYNOS_VIDEO=y
-CONFIG_EXYNOS_MIPI_DSI=y
-CONFIG_DRM_EXYNOS=m
-CONFIG_DRM_EXYNOS_DP=y
-CONFIG_DRM_EXYNOS_DPI=y
-CONFIG_DRM_EXYNOS_DSI=y
-CONFIG_DRM_EXYNOS_FIMC=y
-CONFIG_DRM_EXYNOS_FIMD=y
-CONFIG_DRM_EXYNOS5433_DECON=y
-CONFIG_DRM_EXYNOS_MIC=y
-CONFIG_DRM_EXYNOS7_DECON=y
-CONFIG_DRM_EXYNOS_G2D=y
-CONFIG_DRM_EXYNOS_GSC=y
-CONFIG_DRM_EXYNOS_HDMI=y
-# CONFIG_DRM_EXYNOS_IOMMU is not set
-CONFIG_DRM_EXYNOS_IPP=y
-CONFIG_DRM_EXYNOS_ROTATOR=y
-CONFIG_DRM_EXYNOS_VIDI=y
-CONFIG_DRM_EXYNOS_MIXER=y
-CONFIG_PHY_EXYNOS_DP_VIDEO=m
-CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
-# CONFIG_FB_S3C is not set
-CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
-CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
-CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
-CONFIG_VIDEO_S5P_FIMC=m
-CONFIG_VIDEO_S5P_MIPI_CSIS=m
-CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
-CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
-CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-# CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
-
-CONFIG_SND_SOC_SAMSUNG=m
-CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
-CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
-CONFIG_SND_SOC_SMDK_WM8994_PCM=m
-CONFIG_SND_SOC_SNOW=m
-CONFIG_SND_SOC_ODROIDX2=m
-# CONFIG_EXYNOS_IOMMU_DEBUG is not set
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-
-# Arndale/Origen
-CONFIG_MFD_MAX8997=y
-CONFIG_MFD_MAX77686=y
-CONFIG_REGULATOR_MAX8997=m
-CONFIG_REGULATOR_MAX77686=m
-CONFIG_REGULATOR_S2MPA01=m
-CONFIG_REGULATOR_S5M8767=m
-CONFIG_COMMON_CLK_MAX77686=m
-CONFIG_COMMON_CLK_MAX77802=m
-CONFIG_COMMON_CLK_S2MPS11=m
-CONFIG_INPUT_MAX8997_HAPTIC=m
-CONFIG_CHARGER_MAX8997=m
-CONFIG_LEDS_MAX8997=m
-CONFIG_RTC_DRV_MAX8997=m
-CONFIG_RTC_DRV_MAX77686=m
-CONFIG_RTC_DRV_MAX77802=m
-CONFIG_EXTCON_MAX8997=m
-
-# Tegra
-CONFIG_ARCH_TEGRA_114_SOC=y
-CONFIG_ARCH_TEGRA_124_SOC=y
-CONFIG_ARM_TEGRA_CPUFREQ=y
-CONFIG_TRUSTED_FOUNDATIONS=y
-CONFIG_SERIAL_TEGRA=y
-CONFIG_PCI_TEGRA=y
-CONFIG_AHCI_TEGRA=m
-CONFIG_TEGRA_IOMMU_SMMU=y
-CONFIG_MMC_SDHCI_TEGRA=m
-CONFIG_TEGRA_WATCHDOG=m
-CONFIG_I2C_TEGRA=m
-CONFIG_TEGRA_AHB=y
-CONFIG_TEGRA20_APB_DMA=y
-CONFIG_SPI_TEGRA114=m
-CONFIG_PWM_TEGRA=m
-CONFIG_KEYBOARD_TEGRA=m
-CONFIG_USB_EHCI_TEGRA=m
-CONFIG_RTC_DRV_TEGRA=m
-CONFIG_SND_SOC_TEGRA=m
-CONFIG_SND_SOC_TEGRA_MAX98090=m
-CONFIG_SND_SOC_TEGRA_RT5640=m
-CONFIG_SND_SOC_TEGRA30_AHUB=m
-CONFIG_SND_SOC_TEGRA30_I2S=m
-CONFIG_SND_SOC_TEGRA_RT5677=m
-CONFIG_SND_HDA_TEGRA=m
-CONFIG_TEGRA_HOST1X=m
-CONFIG_TEGRA_HOST1X_FIREWALL=y
-CONFIG_DRM_TEGRA=m
-CONFIG_DRM_TEGRA_FBDEV=y
-# CONFIG_DRM_TEGRA_DEBUG is not set
-CONFIG_DRM_TEGRA_STAGING=y
-CONFIG_NOUVEAU_PLATFORM_DRIVER=y
-CONFIG_AD525X_DPOT=m
-CONFIG_AD525X_DPOT_I2C=m
-CONFIG_AD525X_DPOT_SPI=m
-CONFIG_TEGRA_SOCTHERM=m
-CONFIG_TEGRA_MC=y
-CONFIG_TEGRA124_EMC=y
-CONFIG_ARM_TEGRA_DEVFREQ=m
-# CONFIG_ARM_TEGRA20_CPUFREQ is not set
-CONFIG_ARM_TEGRA124_CPUFREQ=m
-
-# Jetson TK1
-CONFIG_PINCTRL_AS3722=y
-CONFIG_POWER_RESET_AS3722=y
-CONFIG_MFD_AS3722=y
-CONFIG_REGULATOR_AS3722=m
-CONFIG_RTC_DRV_AS3722=y
-
-# TI Generic
-CONFIG_TI_SOC_THERMAL=m
-CONFIG_TI_THERMAL=y
-# CONFIG_OMAP3_THERMAL is not set
-CONFIG_MMC_OMAP_HS=m
-
-# mvebu
-CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370=y
-CONFIG_MACH_ARMADA_375=y
-CONFIG_MACH_ARMADA_38X=y
-CONFIG_MACH_ARMADA_39X=y
-CONFIG_MACH_ARMADA_XP=y
-CONFIG_MACH_DOVE=y
-
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_PCI_MVEBU=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_MV_XOR=y
-CONFIG_CRYPTO_DEV_MV_CESA=m
-CONFIG_CRYPTO_DEV_MARVELL_CESA=m
-CONFIG_MV643XX_ETH=m
-CONFIG_PINCTRL_MVEBU=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_XP=y
-# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
-CONFIG_PINCTRL_DOVE=y
-CONFIG_EDAC_MV64X60=m
-CONFIG_RTC_DRV_S35390A=m
-CONFIG_RTC_DRV_88PM80X=m
-CONFIG_RTC_DRV_ISL12057=m
-CONFIG_RTC_DRV_MV=m
-CONFIG_RTC_DRV_ARMADA38X=m
-CONFIG_MVNETA=m
-CONFIG_GPIO_MVEBU=y
-CONFIG_MVEBU_CLK_CORE=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MMC_MVSDIO=m
-CONFIG_MMC_SDHCI_DOVE=m
-CONFIG_SPI_ORION=m
-CONFIG_USB_MV_UDC=m
-CONFIG_MVEBU_MBUS=y
-CONFIG_USB_XHCI_MVEBU=m
-CONFIG_PHY_MVEBU_SATA=y
-CONFIG_AHCI_MVEBU=m
-CONFIG_ARMADA_THERMAL=m
-CONFIG_DOVE_THERMAL=m
-CONFIG_DRM_ARMADA=m
-CONFIG_ORION_WATCHDOG=m
-CONFIG_SND_KIRKWOOD_SOC=m
-CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
-CONFIG_USB_EHCI_HCD_ORION=m
-CONFIG_MMC_SDHCI_PXAV3=m
-CONFIG_MVPP2=m
-CONFIG_COMMON_CLK_SI5351=m
-CONFIG_RTC_DRV_ARMADA38X=m
-# CONFIG_CACHE_FEROCEON_L2 is not set
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_LEDS_NS2=m
-
-# DRM panels
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_PANEL_LD9040=m
-CONFIG_DRM_PANEL_S6E8AA0=m
-CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
-CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
-CONFIG_DRM_PANEL_LG_LG4573=m
-CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
-CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
-CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
-CONFIG_DRM_DW_HDMI=m
-CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
-
-# regmap
-CONFIG_REGMAP_SPI=m
-CONFIG_REGMAP_SPMI=m
-CONFIG_REGMAP_MMIO=m
-CONFIG_REGMAP_IRQ=y
-
-# usb net
-CONFIG_AX88796=m
-CONFIG_AX88796_93CX6=y
-
-# Multifunction Devices
-CONFIG_MFD_TPS65090=y
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TPS65912=y
-CONFIG_MFD_TPS65912_I2C=y
-CONFIG_MFD_TPS65912_SPI=y
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL6040_CORE is not set
-# 
-
-# Pin stuff
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_SAMSUNG is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-# CONFIG_PINCTRL_BCM281XX is not set
-# CONFIG_PINCTRL_APQ8064 is not set
-# CONFIG_PINCTRL_APQ8084 is not set
-# CONFIG_PINCTRL_IPQ8064 is not set
-# CONFIG_PINCTRL_MSM8960 is not set
-# CONFIG_PINCTRL_MSM8660 is not set
-# CONFIG_PINCTRL_MSM8996 is not set
-
-# GPIO
-# CONFIG_GPIO_EM is not set
-CONFIG_GPIO_74X164=m
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MC33880=m
-CONFIG_GPIO_TPS65910=y
-CONFIG_GPIO_TPS65912=m
-# CONFIG_GPIO_ZEVIO is not set
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_REGISTER=y
-CONFIG_MDIO_BUS_MUX=m
-CONFIG_MDIO_BUS_MUX_GPIO=m
-CONFIG_MDIO_BUS_MUX_MMIOREG=m
-CONFIG_INPUT_GPIO=m
-CONFIG_INPUT_GPIO_BEEPER=m
-CONFIG_INPUT_GPIO_TILT_POLLED=m
-CONFIG_INPUT_MATRIXKMAP=m
-CONFIG_KEYBOARD_MATRIX=m
-# CONFIG_GPIO_RCAR is not set
-CONFIG_W1_MASTER_GPIO=m
-
-# SPI
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_ALTERA=m
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-CONFIG_SPI_DESIGNWARE=m
-CONFIG_SPI_LM70_LLP=m
-CONFIG_SPI_OC_TINY=m
-CONFIG_SPI_SC18IS602=m
-CONFIG_SPI_TLE62X0=m
-CONFIG_SPI_XCOMM=m
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-
-CONFIG_NFC_NCI_SPI=y
-
-# i2c
-CONFIG_I2C_MV64XXX=m
-
-# HW crypto and rng
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-
-# DMA
-CONFIG_TI_PRIV_EDMA=y
-CONFIG_TI_EDMA=y
-
-# MTD
-# CONFIG_MG_DISK is not set
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
-CONFIG_MTD_DATAFLASH_OTP=y
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_DENALI is not set
-CONFIG_MTD_NAND_DOCG4=m
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_FSMC=m
-CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_MXC=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_ORION=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_NAND_PXA3xx=m
-CONFIG_MTD_NAND_RICOH=m
-CONFIG_MTD_NAND_TMIO=m
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-CONFIG_MTD_SPI_NOR=m
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPINAND_MT29F=m
-CONFIG_MTD_SPINAND_ONDIEECC=y
-CONFIG_MTD_SST25L=m
-CONFIG_MTD_ST_SPI_FSM=m
-CONFIG_EEPROM_AT25=m
-CONFIG_EEPROM_93XX46=m
-
-# Sound
-CONFIG_SND_ARM=y
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC_AC97_CODEC=y
-
-# RTC
-CONFIG_RTC_DRV_DS1305=m
-CONFIG_RTC_DRV_DS1390=m
-CONFIG_RTC_DRV_DS3234=m
-CONFIG_RTC_DRV_M41T93=m
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_PCF2123=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-CONFIG_RTC_DRV_RX4581=m
-CONFIG_RTC_DRV_TPS65910=m
-CONFIG_RTC_DRV_TPS80031=m
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_XGENE  is not set
-
-# Regulators
-CONFIG_REGULATOR=y
-CONFIG_RFKILL_REGULATOR=m
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
-CONFIG_REGULATOR_USERSPACE_CONSUMER=m
-CONFIG_REGULATOR_GPIO=m
-# CONFIG_REGULATOR_ACT8865 is not set
-CONFIG_REGULATOR_AD5398=m
-CONFIG_REGULATOR_DA9210=m
-CONFIG_REGULATOR_FAN53555=m
-CONFIG_REGULATOR_ISL6271A=m
-CONFIG_REGULATOR_LP3971=m
-CONFIG_REGULATOR_LP3972=m
-CONFIG_REGULATOR_LP872X=m
-CONFIG_REGULATOR_LP8755=m
-CONFIG_REGULATOR_MAX1586=m
-CONFIG_REGULATOR_MAX8649=m
-CONFIG_REGULATOR_MAX8660=m
-CONFIG_REGULATOR_MAX8952=m
-CONFIG_REGULATOR_MAX8973=m
-CONFIG_REGULATOR_PFUZE100=m
-CONFIG_REGULATOR_PV88060=m
-CONFIG_REGULATOR_PV88090=m
-CONFIG_REGULATOR_TPS51632=m
-CONFIG_REGULATOR_TPS62360=m
-CONFIG_REGULATOR_TPS65023=m
-CONFIG_REGULATOR_TPS6507X=m
-CONFIG_REGULATOR_TPS65090=m
-CONFIG_REGULATOR_TPS65217=m
-CONFIG_REGULATOR_TPS6524X=m
-CONFIG_REGULATOR_TPS6586X=m
-CONFIG_REGULATOR_TPS65910=m
-CONFIG_REGULATOR_TPS65912=m
-CONFIG_REGULATOR_TPS80031=m
-CONFIG_REGULATOR_LTC3589=m
-CONFIG_REGULATOR_ANATOP=m
-CONFIG_REGULATOR_DA9211=m
-CONFIG_REGULATOR_ISL9305=m
-CONFIG_REGULATOR_MAX77802=m
-CONFIG_REGULATOR_PWM=m
-# CONFIG_REGULATOR_MT6311 is not set
-CONFIG_SENSORS_LTC2978_REGULATOR=y
-
-CONFIG_POWER_AVS=y
-CONFIG_CHARGER_MANAGER=y
-CONFIG_CHARGER_BQ2415X=m
-CONFIG_CHARGER_BQ24190=m
-CONFIG_CHARGER_BQ24735=m
-CONFIG_CHARGER_GPIO=m
-CONFIG_CHARGER_TPS65090=m
-CONFIG_PDA_POWER=m
-CONFIG_GENERIC_ADC_BATTERY=m
-CONFIG_BATTERY_SBS=m
-
-# Sensors
-CONFIG_TMP006=m
-CONFIG_BMP085=y
-CONFIG_BMP085_I2C=m
-CONFIG_BMP085_SPI=m
-CONFIG_BMP280=m
-CONFIG_SENSORS_AD7314=m
-CONFIG_SENSORS_ADCXX=m
-CONFIG_SENSORS_ADS7871=m
-CONFIG_SENSORS_BH1780=m
-CONFIG_SENSORS_GPIO_FAN=m
-CONFIG_SENSORS_HTU21=m
-CONFIG_SENSORS_ISL29018=m
-CONFIG_SENSORS_ISL29028=m
-CONFIG_SENSORS_LIS3_SPI=m
-CONFIG_SENSORS_LM70=m
-CONFIG_SENSORS_MAX1111=m
-CONFIG_MPL115=m
-CONFIG_MPL3115=m
-CONFIG_SI7005=m
-CONFIG_SI7020=m
-
-CONFIG_LCD_L4F00242T03=m
-CONFIG_LCD_LMS283GF05=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI922X=m
-CONFIG_LCD_ILI9320=m
-CONFIG_LCD_TDO24M=m
-CONFIG_LCD_VGG2432A4=m
-CONFIG_LCD_S6E63M0=m
-CONFIG_LCD_LD9040=m
-CONFIG_LCD_AMS369FG06=m
-CONFIG_LCD_LMS501KF03=m
-CONFIG_LCD_HX8357=m
-
-# Input
-CONFIG_INPUT_GP2A=m
-CONFIG_INPUT_ARIZONA_HAPTICS=m
-CONFIG_INPUT_MC13783_PWRBUTTON=m
-
-CONFIG_TOUCHSCREEN_ADS7846=m
-CONFIG_TOUCHSCREEN_AD7877=m
-CONFIG_TOUCHSCREEN_MC13783=m
-CONFIG_TOUCHSCREEN_TSC2005=m
-
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_PWM=m
-CONFIG_LEDS_SYSCON=y
-CONFIG_BMP085_SPI=m
-
-CONFIG_MFD_SYSCON=y
-CONFIG_GPIO_SYSCON=m
-CONFIG_POWER_RESET_SYSCON=y
-
-CONFIG_SRAM=y
-
-# Ethernet
-CONFIG_KS8851=m
-CONFIG_KS8851_MLL=m
-CONFIG_ENC28J60=m
-CONFIG_LIBERTAS_SPI=m
-CONFIG_P54_SPI=m
-CONFIG_P54_SPI_DEFAULT_EEPROM=n
-CONFIG_MICREL_KS8995MA=m
-CONFIG_IEEE802154_AT86RF230=m
-CONFIG_IEEE802154_MRF24J40=m
-
-CONFIG_ARM_KPROBES_TEST=m
-
-# jffs2
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_ZLIB=y
-
-CONFIG_UBIFS_FS=m
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-
-# Chromebook
-CONFIG_MFD_CROS_EC=m
-CONFIG_MFD_CROS_EC_I2C=m
-CONFIG_MFD_CROS_EC_SPI=m
-CONFIG_KEYBOARD_CROS_EC=m
-CONFIG_I2C_CROS_EC_TUNNEL=m
-CONFIG_SND_SOC_TS3A227E=m
-CONFIG_CROS_EC_CHARDEV=m
-CONFIG_CROS_EC_PROTO=y
-
-# This newly introduced mess needs to be fixed upstream :-(
-CONFIG_STMMAC_PLATFORM=m
-CONFIG_DWMAC_GENERIC=m
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-
-CONFIG_R8188EU=m
-
-# CONFIG_88EU_AP_MODE is not set
-
-# CAN drivers
-# CONFIG_CAN_TI_HECC is not set
-# CONFIG_CAN_FLEXCAN is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_MCP251X is not set
-
-# Needs work/investigation
-# CONFIG_ARM_KPROBES_TEST is not set
-
-# HW Enabled in armv7 not lpae
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_IMX is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_TI_DAC7512 is not set
-
-# Not needed on ARMv7
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DM9000 is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_FB_XILINX is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SFC is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_POWER_RESET_QNAP is not set
-# CONFIG_MMC_TMIO is not set
-# CONFIG_PINCTRL_IMX35 is not set
-# CONFIG_DVB_USB_PCTV452E is not set
-
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_SND_SOC_APQ8016_SBC is not set
-# CONFIG_SND_SOC_TAS571X is not set
-
-# Debug options. We need to deal with them at some point like x86
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DMADEVICES_VDEBUG is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_CRYPTO_DEV_UX500_DEBUG is not set
-# CONFIG_AB8500_DEBUG is not set
-# CONFIG_ARM_KERNMEM_PERMS is not set
-
-# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set
-
-# Altera?
-# CONFIG_PCIE_ALTERA is not set

config-armv7-lpae

@@ -1,84 +0,0 @@
-# ARM A15 lpae unified arch kernel
-CONFIG_ARCH_KEYSTONE=y
-
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_AXXIA is not set
-
-CONFIG_ARM_LPAE=y
-# CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
-
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-CONFIG_CMA_SIZE_MBYTES=64
-
-# Cortex-A15
-CONFIG_ARM_ERRATA_798181=y
-CONFIG_ARM_ERRATA_773022=y
-
-CONFIG_KVM=y
-CONFIG_KVM_ARM_HOST=y
-CONFIG_KVM_ARM_MAX_VCPUS=8
-
-# CONFIG_XEN is not set
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
-CONFIG_XEN_BLKDEV_FRONTEND=m
-CONFIG_XEN_BLKDEV_BACKEND=m
-CONFIG_XEN_NETDEV_FRONTEND=m
-CONFIG_XEN_NETDEV_BACKEND=m
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_XEN_DEV_EVTCHN=m
-CONFIG_XEN_BACKEND=y
-CONFIG_XENFS=m
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=m
-CONFIG_XEN_WDT=m
-# CONFIG_XEN_BALLOON is not set
-
-# TI Keystone
-CONFIG_KEYSTONE_USB_PHY=m
-CONFIG_USB_DWC3_KEYSTONE=m
-CONFIG_GPIO_DAVINCI=y
-# CONFIG_I2C_DAVINCI is not set
-CONFIG_TI_AEMIF=m
-CONFIG_POWER_RESET_KEYSTONE=y
-CONFIG_DAVINCI_WATCHDOG=m
-CONFIG_SPI_DAVINCI=m
-CONFIG_TI_DAVINCI_MDIO=m
-CONFIG_KEYSTONE_IRQ=m
-CONFIG_PCI_KEYSTONE=y
-CONFIG_MTD_NAND_DAVINCI=m
-CONFIG_GPIO_SYSCON=m
-
-# Tegra (non A15 device options)
-# CONFIG_ARCH_TEGRA_2x_SOC is not set
-# CONFIG_ARCH_TEGRA_3x_SOC is not set
-# CONFIG_TEGRA20_MC is not set
-# CONFIG_TEGRA_IOMMU_GART is not set
-# CONFIG_SPI_TEGRA20_SFLASH is not set
-# CONFIG_SPI_TEGRA20_SLINK is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_NVEC is not set
-# CONFIG_SND_SOC_TEGRA_ALC5632 is not set
-# CONFIG_SND_SOC_TEGRA_TRIMSLICE is not set
-# CONFIG_SND_SOC_TEGRA_WM8753 is not set
-# CONFIG_SND_SOC_TEGRA_WM8903 is not set
-# CONFIG_SND_SOC_TEGRA_WM9712 is not set
-# CONFIG_SND_SOC_TEGRA20_AC97 is not set
-# CONFIG_SND_SOC_TEGRA20_DAS is not set
-# CONFIG_SND_SOC_TEGRA20_SPDIF is not set
-# CONFIG_SND_SOC_TEGRA_RT5677 is not set
-# CONFIG_DRM_OMAP is not set

config-debug

@@ -1,130 +0,0 @@
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_PCM_XRUN_DEBUG=y
-
-CONFIG_DEBUG_ATOMIC_SLEEP=y
-
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_LOCK_TORTURE_TEST=m
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_PROVE_RCU=y
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-CONFIG_DEBUG_PER_CPU_MAPS=y
-CONFIG_CPUMASK_OFFSTACK=y
-
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
-
-CONFIG_FAULT_INJECTION=y
-CONFIG_FAILSLAB=y
-CONFIG_FAIL_PAGE_ALLOC=y
-CONFIG_FAIL_MAKE_REQUEST=y
-CONFIG_FAULT_INJECTION_DEBUG_FS=y
-CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
-CONFIG_FAIL_IO_TIMEOUT=y
-CONFIG_FAIL_MMC_REQUEST=y
-
-CONFIG_LOCK_STAT=y
-
-CONFIG_DEBUG_STACK_USAGE=y
-
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUGGER is not set
-CONFIG_DEBUG_SG=y
-CONFIG_DEBUG_PI_LIST=y
-
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-
-CONFIG_DEBUG_OBJECTS=y
-# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-
-CONFIG_X86_PTDUMP=y
-CONFIG_ARM64_PTDUMP=y
-CONFIG_EFI_PGT_DUMP=y
-
-CONFIG_CAN_DEBUG_DEVICES=y
-
-CONFIG_MODULE_FORCE_UNLOAD=y
-
-
-CONFIG_DEBUG_NOTIFIERS=y
-
-CONFIG_DMA_API_DEBUG=y
-
-CONFIG_MMIOTRACE=y
-
-CONFIG_DEBUG_CREDENTIALS=y
-
-CONFIG_EXT4_DEBUG=y
-
-CONFIG_XFS_WARN=y
-
-CONFIG_DEBUG_PERF_USE_VMALLOC=y
-
-# off in both production debug and nodebug builds,
-#  on in rawhide nodebug builds
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-
-CONFIG_JBD2_DEBUG=y
-
-CONFIG_NFSD_FAULT_INJECTION=y
-
-CONFIG_DEBUG_BLK_CGROUP=y
-
-CONFIG_DRBD_FAULT_INJECTION=y
-
-CONFIG_ATH_DEBUG=y
-CONFIG_CARL9170_DEBUGFS=y
-CONFIG_IWLWIFI_DEVICE_TRACING=y
-
-CONFIG_RTLWIFI_DEBUG=y
-
-CONFIG_DEBUG_OBJECTS_WORK=y
-
-CONFIG_DMADEVICES_DEBUG=y
-# CONFIG_DMADEVICES_VDEBUG is not set
-
-CONFIG_PM_ADVANCED_DEBUG=y
-
-CONFIG_CEPH_LIB_PRETTYDEBUG=y
-CONFIG_QUOTA_DEBUG=y
-
-
-CONFIG_KGDB_KDB=y
-CONFIG_KDB_KEYBOARD=y
-CONFIG_KDB_DEFAULT_ENABLE=0x1
-CONFIG_KDB_CONTINUE_CATASTROPHIC=0
-
-CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
-CONFIG_PERCPU_TEST=m
-CONFIG_TEST_LIST_SORT=y
-CONFIG_TEST_STRING_HELPERS=m
-
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-
-CONFIG_WQ_WATCHDOG=y
-
-CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
-
-CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
-# CONFIG_DEBUG_KMEMLEAK_TEST is not set
-CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
-
-CONFIG_MAC80211_MESSAGE_TRACING=y
-
-CONFIG_EDAC_DEBUG=y
-
-CONFIG_SPI_DEBUG=y
-
-CONFIG_X86_DEBUG_STATIC_CPU_HAS=y

config-i686-PAE

@@ -1,8 +0,0 @@
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HIGHMEM64G=y
-
-CONFIG_XEN_DEV_EVTCHN=m
-CONFIG_XEN_SYS_HYPERVISOR=y
-
-# I2O only works on non-PAE 32-bit x86
-# CONFIG_I2O is not set

config-no-extra

@@ -1,27 +0,0 @@
-### config-no-extra: only (to a first approximation) modules listed in
-###   mod-extra.list should be listed here. 
-
-# CONFIG_ISDN is not set
-# CONFIG_RDS is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATALK is not set
-# CONFIG_HAMRADIO is not set
-
-# CONFIG_DEV_APPLETALK is not set
-
-# CONFIG_FUSION is not set
-# CONFIG_I2O is not set
-
-# CONFIG_NET_TULIP is not set
-
-# CONFIG_HERMES is not set
-
-# CONFIG_OCFS2_FS is not set
-# CONFIG_CUSE is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set

config-nodebug

@@ -1,130 +0,0 @@
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_PCM_XRUN_DEBUG=y
-
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-CONFIG_CPUMASK_OFFSTACK=y
-
-# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
-
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FAILSLAB is not set
-# CONFIG_FAIL_PAGE_ALLOC is not set
-# CONFIG_FAIL_MAKE_REQUEST is not set
-# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
-# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
-# CONFIG_FAIL_IO_TIMEOUT is not set
-# CONFIG_FAIL_MMC_REQUEST is not set
-
-# CONFIG_LOCK_STAT is not set
-
-# CONFIG_DEBUG_STACK_USAGE is not set
-
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_PI_LIST is not set
-
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
-# CONFIG_DEBUG_OBJECTS_FREE is not set
-# CONFIG_DEBUG_OBJECTS_TIMERS is not set
-# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-
-CONFIG_X86_PTDUMP=y
-# CONFIG_ARM64_PTDUMP is not set
-# CONFIG_EFI_PGT_DUMP is not set
-
-# CONFIG_CAN_DEBUG_DEVICES is not set
-
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-
-
-# CONFIG_DEBUG_NOTIFIERS is not set
-
-# CONFIG_DMA_API_DEBUG is not set
-
-# CONFIG_MMIOTRACE is not set
-
-# CONFIG_DEBUG_CREDENTIALS is not set
-
-# off in both production debug and nodebug builds,
-#  on in rawhide nodebug builds
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-
-# CONFIG_EXT4_DEBUG is not set
-
-# CONFIG_XFS_WARN is not set
-
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-
-# CONFIG_JBD2_DEBUG is not set
-
-# CONFIG_NFSD_FAULT_INJECTION is not set
-
-# CONFIG_DEBUG_BLK_CGROUP is not set
-
-# CONFIG_DRBD_FAULT_INJECTION is not set
-
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_CARL9170_DEBUGFS is not set
-# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-
-# CONFIG_RTLWIFI_DEBUG is not set
-
-# CONFIG_DEBUG_OBJECTS_WORK is not set
-
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMADEVICES_VDEBUG is not set
-
-CONFIG_PM_ADVANCED_DEBUG=y
-
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-# CONFIG_QUOTA_DEBUG is not set
-
-
-CONFIG_KGDB_KDB=y
-CONFIG_KDB_DEFAULT_ENABLE=0x0
-CONFIG_KDB_KEYBOARD=y
-CONFIG_KDB_CONTINUE_CATASTROPHIC=0
-
-# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-# CONFIG_WQ_WATCHDOG is not set
-
-# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
-
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
-# CONFIG_DEBUG_KMEMLEAK_TEST is not set
-CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
-
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-
-# CONFIG_EDAC_DEBUG is not set
-
-# CONFIG_SPI_DEBUG is not set
-
-# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

config-powerpc64

@@ -1,109 +0,0 @@
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-
-CONFIG_PPC_MAPLE=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PMAC64=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_IDE_PMAC is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-CONFIG_IDE_GD_ATAPI=y
-
-CONFIG_PATA_PLATFORM=m
-CONFIG_PATA_OF_PLATFORM=m
-
-# Power970 / G5
-CONFIG_EDAC_CPC925=m
-
-# Maple
-CONFIG_CPU_FREQ_MAPLE=y
-CONFIG_EDAC_AMD8111=m
-CONFIG_EDAC_AMD8131=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_MMIO_NVRAM=y
-
-# Apple G5
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_PMU=y
-CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
-CONFIG_I2C_POWERMAC=y
-CONFIG_PMAC_RACKMETER=m
-CONFIG_PMAC_APM_EMU=m
-CONFIG_APM_EMULATION=m
-CONFIG_PMAC_SMU=y
-CONFIG_APPLE_AIRPORT=m
-CONFIG_SND_POWERMAC=m
-CONFIG_SND_POWERMAC_AUTO_DRC=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_PATA_MACIO=y
-CONFIG_WINDFARM=y
-CONFIG_WINDFARM_RM31=y
-CONFIG_WINDFARM_PM72=y
-CONFIG_WINDFARM_PM81=y
-CONFIG_WINDFARM_PM91=y
-CONFIG_WINDFARM_PM112=y
-CONFIG_WINDFARM_PM121=y
-CONFIG_CPU_FREQ_PMAC64=y
-CONFIG_SERIAL_PMACZILOG=m
-# CONFIG_SERIAL_PMACZILOG_TTYS is not set
-CONFIG_AGP_UNINORTH=y
-# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
-
-CONFIG_SND_AOA=m
-CONFIG_SND_AOA_SOUNDBUS=m
-CONFIG_SND_AOA_FABRIC_LAYOUT=m
-CONFIG_SND_AOA_ONYX=m
-CONFIG_SND_AOA_TAS=m
-CONFIG_SND_AOA_TOONIE=m
-CONFIG_SND_AOA_SOUNDBUS_I2S=m

config-powerpc64-generic

@@ -1,384 +0,0 @@
-CONFIG_PPC=y
-CONFIG_PPC64=y
-
-CONFIG_PPC_POWERNV=y
-CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_QPACE is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_PMAC64 is not set
-# CONFIG_PPC_PS3 is not set
-CONFIG_HIBERNATION=n
-
-CONFIG_EXTRA_TARGETS=""
-
-CONFIG_NR_CPUS=1024
-
-CONFIG_NR_IRQS=512
-CONFIG_SPARSE_IRQ=y
-CONFIG_IRQ_ALL_CPUS=y
-CONFIG_IRQSTACKS=y
-
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DEBUGGER=y
-CONFIG_PPC_DENORMALISATION=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-
-CONFIG_FRAME_WARN=2048
-
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-CONFIG_XMON=y
-# CONFIG_XMON_DEFAULT is not set
-CONFIG_XMON_DISASSEMBLY=y
-
-CONFIG_BOOTX_TEXT=y
-
-CONFIG_ALTIVEC=y
-CONFIG_VSX=y
-
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-
-CONFIG_NUMA=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_PPC_64K_PAGES=y
-CONFIG_PPC_SUBPAGE_PROT=y
-CONFIG_SCHED_SMT=y
-# CONFIG_TUNE_CELL is not set
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
-
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_MEM_SOFT_DIRTY=y
-
-CONFIG_RCU_FANOUT=64
-CONFIG_RCU_FANOUT_LEAF=16
-
-CONFIG_FA_DUMP=y
-CONFIG_RELOCATABLE=y
-
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_POWERNV_CPUIDLE=y
-CONFIG_PSERIES_CPUIDLE=y
-
-CONFIG_HW_RANDOM_PSERIES=m
-CONFIG_CRYPTO_DEV_NX=y
-CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
-CONFIG_CRYPTO_DEV_NX_COMPRESS=m
-CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES=m
-CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV=m
-CONFIG_CRYPTO_DEV_NX_COMPRESS_CRYPTO=m
-CONFIG_CRYPTO_DEV_VMX=y
-CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
-
-CONFIG_XZ_DEC_POWERPC=y
-
-# HW Virt
-CONFIG_CMA=y
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_AREAS=7
-CONFIG_KVM_GUEST=y
-CONFIG_KVM_BOOK3S_64=m
-CONFIG_KVM_BOOK3S_64_HV=m
-CONFIG_KVM_BOOK3S_64_PR=m
-# CONFIG_KVM_BOOK3S_HV_EXIT_TIMING is not set
-# CONFIG_KVM_EXIT_TIMING is not set
-CONFIG_KVM_XICS=y
-# CONFIG_HCALL_STATS is not set
-CONFIG_PPC_SPLPAR=y
-CONFIG_LPARCFG=y
-#-- active memory sharing
-CONFIG_PPC_SMLPAR=y
-CONFIG_CMM=y
-CONFIG_HV_PERF_CTRS=y
-#-- DLPAR memory remove
-CONFIG_SPARSEMEM_VMEMMAP=y
-
-# Power NV
-CONFIG_HVC_CONSOLE=y
-CONFIG_HVCS=m
-CONFIG_HVC_RTAS=y
-CONFIG_HVC_OPAL=y
-CONFIG_I2C_OPAL=m
-CONFIG_RTC_DRV_OPAL=m
-CONFIG_SENSORS_IBMPOWERNV=y
-CONFIG_HW_RANDOM_POWERNV=m
-CONFIG_POWERNV_CPUFREQ=m
-CONFIG_IPMI_POWERNV=m
-CONFIG_RTAS_FLASH=y
-CONFIG_OPAL_PRD=m
-CONFIG_MTD_POWERNV_FLASH=m
-
-# Power 7 and later
-CONFIG_PPC_TRANSACTIONAL_MEM=y
-CONFIG_BLK_DEV_RSXX=m
-CONFIG_CXL=m
-CONFIG_CXLFLASH=m
-CONFIG_IBMEBUS=y
-CONFIG_EHEA=m
-CONFIG_INFINIBAND_EHCA=m
-CONFIG_PPC_ICSWX=y
-# CONFIG_PPC_ICSWX_PID is not set
-# CONFIG_PPC_ICSWX_USE_SIGILL is not set
-
-# pSeries
-# CONFIG_SCSI_IBMVFC_TRACE is not set
-CONFIG_IBM_BSR=m
-CONFIG_IBMVETH=m
-CONFIG_PSERIES_ENERGY=m
-# CONFIG_HVC_OLD_HVSI is not set
-CONFIG_SCOM_DEBUGFS=y
-CONFIG_SCANLOG=y
-CONFIG_RTAS_PROC=y
-CONFIG_WATCHDOG_RTAS=m
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_IO_EVENT_IRQ=y
-
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_GEN_RTC_X is not set
-CONFIG_RTC_DRV_GENERIC=y
-# CONFIG_CMDLINE_BOOL is not set
-
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
-
-CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_IBMVSCSI=m
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_8250 is not set
-
-# Things we might want to review for newer architectures
-# CONFIG_PCIEPORTBUS is not set
-
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_CT65550 is not set
-CONFIG_FB_IBM_GXT4500=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-# CONFIG_FB_MB862XX_LIME is not set
-# CONFIG_FB_MB862XX_I2C is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-
-# CONFIG_SND_SOC is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-CONFIG_CAPI_EICON=y
-
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_NI65 is not set
-# CONFIG_LANCE is not set
-# CONFIG_3C515 is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-# Stuff which wants bus_to_virt() or virt_to_bus()
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_POWERNV=m
-
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_EDAC_CPC925 is not set
-
-CONFIG_SPU_FS_64K_LS=y
-
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=m
-CONFIG_EDAC_LEGACY_SYSFS=y
-
-# CONFIG_AXON_RAM is not set
-
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-
-# CONFIG_MPC5121_ADS is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-CONFIG_THERMAL=y
-
-# CONFIG_MEMORY_HOTREMOVE is not set
-
-CONFIG_DMADEVICES=y
-# CONFIG_FSL_DMA is not set
-
-CONFIG_SND_PPC=y
-
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_FS_ENET is not set
-# CONFIG_UCC_GETH is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_QE is not set
-# CONFIG_I2C_CPM is not set
-
-CONFIG_NET_VENDOR_IBM=y
-
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-
-# CONFIG_PPC_SMLPAR is not set
-
-# CONFIG_MGCOGE is not set
-# CONFIG_GEF_SBC610 is not set
-# CONFIG_GEF_PPC9A is not set
-# CONFIG_GEF_SBC310 is not set
-
-# CONFIG_MCU_MPC8349EMITX is not set
-
-# CONFIG_GPIO_XILINX is not set
-
-CONFIG_MSI_BITMAP_SELFTEST=y
-
-CONFIG_RELOCATABLE=y
-
-# CONFIG_HVC_UDBG is not set
-CONFIG_PRINT_STACK_DEPTH=64
-
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_TWL4030_CORE is not set
-
-CONFIG_BLK_DEV_IT8172=m
-
-CONFIG_SIMPLE_GPIO=y
-
-# CONFIG_FSL_PQ_MDIO is not set
-
-# CONFIG_PS3_VRAM is not set
-CONFIG_MDIO_GPIO=m
-CONFIG_SERIAL_OF_PLATFORM=m
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-# CONFIG_USB_FHCI_HCD is not set
-# CONFIG_FHCI_DEBUG is not set
-
-# CONFIG_AMIGAONE is not set
-
-CONFIG_DTL=y
-
-CONFIG_MMC_SDHCI_OF=m
-
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-
-CONFIG_PPC_EMULATED_STATS=y
-
-CONFIG_SWIOTLB=y
-
-CONFIG_PPC_DISABLE_WERROR=y
-# CONFIG_STRICT_MM_TYPECHECKS is not set
-
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_EMACLITE is not set
-
-CONFIG_GPIO_WM831X=m
-# CONFIG_GPIO_UCB1400 is not set
-# CONFIG_EDAC_MPC85XX is not set
-
-# CONFIG_PPC_MPC5200_LPBFIFO is not set
-# CONFIG_CAN_MSCAN is not set
-# CONFIG_CAN_MPC5XXX is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-
-# CONFIG_MFD_AAT2870_CORE is not set
-
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-
-CONFIG_I2C_MPC=m
-
-# CONFIG_IMA is not set
-# CONFIG_TCG_TPM is not set
-
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_SHA1_PPC is not set
-# CONFIG_CRYPTO_MD5_PPC is not set
-
-# CONFIG_CAN_FLEXCAN is not set
-# CONFIG_NET_VENDOR_XILINX is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_IBM_EMAC is not set
-# CONFIG_NET_VENDOR_PASEMI is not set
-# CONFIG_NET_VENDOR_TOSHIBA is not set
-CONFIG_IBMVNIC=m
-
-CONFIG_MDIO_OCTEON=m
-
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OF_OVERLAY is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_MPIC_MSGR is not set
-# CONFIG_FA_DUMP is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-
-# CONFIG_FAIL_IOMMU is not set
-# CONFIG_SPAPR_TCE_IOMMU is not set
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-
-# CONFIG_WINDFARM is not set
-
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_FB_SSD1307=m
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_BACKLIGHT_PWM=m

config-powerpc64le

@@ -1,6 +0,0 @@
-CONFIG_CPU_LITTLE_ENDIAN=y
-
-CONFIG_POWER7_CPU=y
-
-# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
-CONFIG_CHECKPOINT_RESTORE=y

config-powerpc64p7

@@ -1,3 +0,0 @@
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-
-CONFIG_POWER7_CPU=y

config-s390x

@@ -1,299 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_MARCH_Z900 is not set
-CONFIG_MARCH_Z9_109=y
-# CONFIG_MARCH_Z990 is not set
-
-CONFIG_NR_CPUS=64
-CONFIG_COMPAT=y
-
-# See bug 496596
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# See bug 496605
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-CONFIG_LOG_BUF_SHIFT=16
-
-CONFIG_IRQ_DOMAIN_DEBUG=y
-
-#
-# I/O subsystem configuration
-#
-CONFIG_QDIO=m
-
-#
-# Misc
-#
-CONFIG_IPL=y
-CONFIG_PFAULT=y
-CONFIG_SHARED_KERNEL=y
-CONFIG_CMM=m
-# CONFIG_NETIUCV is not set
-CONFIG_SMSGIUCV=m
-CONFIG_CRASH_DUMP=y
-
-#
-# SCSI low-level drivers
-#
-CONFIG_ZFCP=m
-CONFIG_CCW=y
-
-#
-# S/390 block device drivers
-#
-CONFIG_DCSSBLK=m
-CONFIG_BLK_DEV_XPRAM=m
-CONFIG_DASD=m
-CONFIG_DASD_PROFILE=y
-CONFIG_DASD_ECKD=m
-CONFIG_DASD_FBA=m
-CONFIG_DASD_DIAG=m
-CONFIG_DASD_EER=y
-
-#
-# S/390 character device drivers
-#
-CONFIG_TN3270=y
-CONFIG_TN3270_CONSOLE=y
-CONFIG_TN3215=y
-CONFIG_TN3215_CONSOLE=y
-CONFIG_CCW_CONSOLE=y
-CONFIG_SCLP_TTY=y
-CONFIG_SCLP_CONSOLE=y
-CONFIG_SCLP_VT220_TTY=y
-CONFIG_SCLP_VT220_CONSOLE=y
-CONFIG_SCLP_CPI=m
-CONFIG_SCLP_ASYNC=m
-CONFIG_SCLP_ASYNC_ID="000000000"
-CONFIG_SCLP_OFB=y
-CONFIG_S390_TAPE=m
-CONFIG_S390_TAPE_3590=m
-
-CONFIG_APPLDATA_BASE=y
-CONFIG_APPLDATA_MEM=m
-CONFIG_APPLDATA_OS=m
-CONFIG_APPLDATA_NET_SUM=m
-CONFIG_TN3270_TTY=y
-CONFIG_TN3270_FS=m
-
-
-#
-# S/390 tape interface support
-#
-
-#
-# S/390 tape hardware support
-#
-CONFIG_S390_TAPE_34XX=m
-
-# CONFIG_SLIP is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_NETCONSOLE=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# S/390 network device drivers
-#
-CONFIG_LCS=m
-CONFIG_CTC=m
-CONFIG_IUCV=m
-CONFIG_QETH=m
-CONFIG_QETH_IPV6=y
-CONFIG_CCWGROUP=m
-
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_B44 is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_OSF_PARTITION is not set
-CONFIG_IBM_PARTITION=y
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-
-
-#
-# S390 crypto hw
-#
-CONFIG_CRYPTO_AES_S390=m
-CONFIG_CRYPTO_DES_S390=m
-CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_CRYPTO_SHA1_S390=m
-CONFIG_CRYPTO_SHA256_S390=m
-CONFIG_CRYPTO_SHA512_S390=m
-
-#
-# Kernel hacking
-#
-
-#
-# S390 specific stack options; needs gcc 3.5 so off for now
-#
-CONFIG_PACK_STACK=y
-CONFIG_CHECK_STACK=y
-
-CONFIG_DIAG288_WATCHDOG=m
-CONFIG_VMLOGRDR=m
-CONFIG_MONREADER=m
-
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MII is not set
-
-
-CONFIG_STACK_GUARD=256
-CONFIG_CMM_IUCV=y
-
-
-CONFIG_S390_HYPFS_FS=y
-
-CONFIG_MONWRITER=m
-CONFIG_ZCRYPT=m
-
-CONFIG_AFIUCV=m
-CONFIG_S390_PRNG=m
-
-CONFIG_S390_VMUR=m
-
-# CONFIG_THERMAL is not set
-
-CONFIG_CTCM=m
-CONFIG_QETH_L2=m
-CONFIG_QETH_L3=m
-
-CONFIG_KVM=m
-# CONFIG_KVM_S390_UCONTROL is not set
-CONFIG_S390_GUEST=y
-CONFIG_VIRTIO_CONSOLE=y
-
-
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_CHSC_SCH=m
-
-# drivers/isdn/hardware/mISDN/hfcmulti.c:5255:2: error: #error "not running on big endian machines now"
-# CONFIG_MISDN_HFCMULTI is not set
-
-CONFIG_HVC_IUCV=y
-
-CONFIG_RCU_FANOUT=64
-CONFIG_RCU_FANOUT_LEAF=16
-
-# CONFIG_SUSPEND is not set
-
-CONFIG_SMSGIUCV_EVENT=m
-
-# CONFIG_PREEMPT_TRACER is not set
-
-CONFIG_VMCP=y
-
-
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_BOOK=y
-CONFIG_SCHED_TOPOLOGY=y
-# CONFIG_NUMA is not set
-
-# CONFIG_WARN_DYNAMIC_STACK is not set
-
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-CONFIG_SCM_BUS=y
-CONFIG_EADM_SCH=m
-CONFIG_SCM_BLOCK=m
-CONFIG_SCM_BLOCK_CLUSTER_WRITE=y
-# CONFIG_S390_PTDUMP is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-
-CONFIG_PCI=y
-CONFIG_PCI_NR_FUNCTIONS=64
-CONFIG_PCI_NR_MSI=256
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_SHPC=y
-CONFIG_HOTPLUG_PCI_S390=y
-
-# CONFIG_NEW_LEDS is not set
-# CONFIG_HID is not set
-# CONFIG_MTD is not set
-
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_PARPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_FB is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_FCOE is not set
-# CONFIG_FUSION is not set
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_SERIO is not set
-
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_STAGING is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DRM is not set
-# CONFIG_SOUND is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-# CONFIG_SSB is not set
-# CONFIG_BCMA is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_VX855 is not set
-
-# CONFIG_PHYLIB is not set
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_SH_ETH is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_IEEE802154_DRIVERS is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_FMC is not set
-# CONFIG_OF is not set

config-x86-32-generic

@@ -1,224 +0,0 @@
-# CONFIG_64BIT is not set
-
-# CONFIG_X86_32_NON_STANDARD is not set
-
-# CONFIG_X86_GOLDFISH is not set
-CONFIG_X86_BIGSMP=y
-# CONFIG_X86_RDC321X is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-CONFIG_M686=y
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_STA2X11 is not set
-
-CONFIG_NR_CPUS=32
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_PPRO_FENCE is not set
-
-CONFIG_TOSHIBA=m
-
-CONFIG_SONYPI=m
-CONFIG_SONYPI_COMPAT=y
-
-# CONFIG_NUMA is not set
-
-# CONFIG_NOHIGHMEM is not set
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_ZONE_DMA=y
-
-# CONFIG_MATH_EMULATION is not set
-
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=y
-CONFIG_FB_GEODE_GX=y
-# CONFIG_FB_GEODE_GX1 is not set
-
-CONFIG_FB_SSD1307=m
-
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_GOANY=y
-
-CONFIG_IBM_ASM=m
-
-#
-# APM (Advanced Power Management) BIOS Support
-#
-CONFIG_APM=y
-# CONFIG_APM_IGNORE_USER_SUSPEND is not set
-# CONFIG_APM_DO_ENABLE is not set
-CONFIG_APM_CPU_IDLE=y
-# CONFIG_APM_DISPLAY_BLANK is not set
-# CONFIG_APM_ALLOW_INTS is not set
-
-
-# CONFIG_X86_POWERNOW_K6 is not set
-CONFIG_X86_POWERNOW_K7=y
-# CONFIG_X86_GX_SUSPMOD is not set
-CONFIG_X86_SPEEDSTEP_ICH=y
-CONFIG_X86_SPEEDSTEP_SMI=y
-CONFIG_X86_SPEEDSTEP_LIB=y
-# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
-CONFIG_X86_LONGRUN=y
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# e_powersaver is dangerous
-# CONFIG_X86_E_POWERSAVER is not set
-
-CONFIG_X86_HT=y
-
-# CONFIG_4KSTACKS is not set
-
-CONFIG_PCI_DIRECT=y
-
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-
-# SHPC has half-arsed PCI probing, which makes it load on too many systems
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-
-CONFIG_SCx200_ACB=m
-
-# CONFIG_X86_REBOOTFIXUPS is not set
-
-CONFIG_PC8736x_GPIO=m
-# CONFIG_NSC_GPIO is not set
-CONFIG_GPIO_SCH=m
-
-CONFIG_HW_RANDOM_GEODE=m
-
-CONFIG_TC1100_WMI=m
-
-CONFIG_IB700_WDT=m
-
-CONFIG_PHYSICAL_ALIGN=0x400000
-CONFIG_PHYSICAL_START=0x400000
-
-# CONFIG_KEXEC_JUMP is not set
-
-CONFIG_CRYPTO_AES_586=y
-CONFIG_CRYPTO_DEV_GEODE=m
-CONFIG_CRYPTO_TWOFISH_586=m
-
-CONFIG_VIDEO_CAFE_CCIC=m
-
-CONFIG_XEN_MAX_DOMAIN_MEMORY=8
-
-CONFIG_MTD_NAND_CAFE=m
-
-CONFIG_LBDAF=y
-
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-
-
-CONFIG_OLPC=y
-CONFIG_BATTERY_OLPC=y
-CONFIG_MOUSE_PS2_OLPC=y
-CONFIG_OLPC_XO1_PM=y
-CONFIG_OLPC_XO15_SCI=y
-CONFIG_OLPC_XO1_RTC=y
-CONFIG_OLPC_XO1_SCI=y
-# CONFIG_ALIX is not set
-# staging
-# CONFIG_FB_OLPC_DCON is not set
-
-# CONFIG_SPARSE_IRQ is not set
-
-CONFIG_RCU_FANOUT=32
-
-# CONFIG_X86_ANCIENT_MCE is not set
-
-
-CONFIG_I2C_PXA=m
-
-# CONFIG_INTEL_TXT is not set
-
-CONFIG_GEODE_WDT=m
-CONFIG_CS5535_MFGPT=m
-CONFIG_CS5535_CLOCK_EVENT_SRC=m
-
-CONFIG_LEDS_INTEL_SS4200=m
-
-CONFIG_OLPC_XO1=m
-CONFIG_XO1_RFKILL=m
-
-CONFIG_X86_32_IRIS=m
-
-CONFIG_POWER_RESET_GPIO=y
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-
-
-
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP_OF=m
-CONFIG_SERIAL_OF_PLATFORM=m
-CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
-# CONFIG_MMC_SDHCI_OF is not set
-
-# CONFIG_X86_INTEL_MID is not set
-# CONFIG_X86_INTEL_QUARK is not set
-
-CONFIG_MFD_CS5535=m
-# CONFIG_MFD_SYSCON is not set
-
-# I2O enabled only for 32-bit x86, disabled for PAE kernel
-CONFIG_I2O=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-CONFIG_I2O_CONFIG=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_CONFIG_OLD_IOCTL=y
-CONFIG_I2O_BUS=m
-
-CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_BACKLIGHT_PWM=m
-
-# CONFIG_EDAC_SBRIDGE is not set
-
-CONFIG_OF=y
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OF_OVERLAY is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_GEOS is not set
-# CONFIG_NET5501 is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_GPIO_SODAVILLE is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_BACKLIGHT_OT200 is not set
-
-# CONFIG_MLX5_INFINIBAND is not set
-# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PINCTRL_BCM281XX is not set
-# CONFIG_PINCTRL_APQ8064 is not set
-# CONFIG_PINCTRL_IPQ8064 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_KEYBOARD_BCM is not set

config-x86-generic

@@ -1,614 +0,0 @@
-CONFIG_UID16=y
-
-CONFIG_X86_EXTENDED_PLATFORM=y
-
-CONFIG_X86_GENERIC=y
-
-# CONFIG_X86_LEGACY_VM86 is not set
-
-CONFIG_HPET=y
-CONFIG_HPET_TIMER=y
-# CONFIG_HPET_MMAP is not set
-
-CONFIG_I8K=m
-CONFIG_SONYPI_COMPAT=y
-CONFIG_MICROCODE=y
-CONFIG_MICROCODE_EARLY=y
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_INTEL_EARLY=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_AMD_EARLY=y
-
-CONFIG_X86_MSR=y
-CONFIG_X86_CPUID=y
-CONFIG_EDD=m
-# CONFIG_EDD_OFF is not set
-
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG_MESSAGES is not set
-
-# CONFIG_NET_SB1000 is not set
-
-CONFIG_MTRR=y
-CONFIG_MTRR_SANITIZER=y
-CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
-CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
-CONFIG_X86_PAT=y
-CONFIG_X86_PM_TIMER=y
-
-CONFIG_X86_INTEL_MPX=y
-
-CONFIG_EFI=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_VARS is not set
-CONFIG_EFIVAR_FS=y
-# CONFIG_EFI_VARS_PSTORE is not set
-# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
-CONFIG_EFI_PCDP=y
-CONFIG_FB_EFI=y
-CONFIG_EARLY_PRINTK_EFI=y
-CONFIG_EFI_RUNTIME_MAP=y
-# CONFIG_EFI_FAKE_MEMMAP is not set
-# needs FB_SIMPLE to work correctly
-# CONFIG_X86_SYSFB is not set
-
-# FIXME: 32bit only?
-# CONFIG_FB_N411 is not set
-
-CONFIG_INTEL_IOMMU=y
-CONFIG_INTEL_IOMMU_FLOPPY_WA=y
-# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
-CONFIG_INTEL_IOMMU_SVM=y
-CONFIG_SCSI_ADVANSYS=m
-
-CONFIG_CAPI_EICON=y
-
-#
-# Kernel debugging
-#
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-CONFIG_MMIOTRACE=y
-# CONFIG_MMIOTRACE_TEST is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-CONFIG_DEBUG_RODATA=y
-CONFIG_DEBUG_WX=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_SBS=m
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_TOSHIBA=m
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
-# FIXME: Next two are deprecated. Remove them when they disappear upstream
-# CONFIG_ACPI_PROCFS_POWER is not set
-CONFIG_PNPACPI=y
-CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
-CONFIG_ACPI_HED=m
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_MEMORY_FAILURE=y
-# CONFIG_ACPI_APEI_EINJ is not set
-CONFIG_ACPI_IPMI=m
-CONFIG_ACPI_CUSTOM_METHOD=m
-CONFIG_ACPI_BGRT=y
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
-
-CONFIG_INTEL_SOC_PMIC=y
-CONFIG_PMIC_OPREGION=y
-CONFIG_CRC_PMIC_OPREGION=y
-CONFIG_XPOWER_PMIC_OPREGION=y
-CONFIG_GPIO_CRYSTAL_COVE=y
-CONFIG_AXP288_ADC=y
-CONFIG_AXP288_FUEL_GAUGE=y
-# CONFIG_PWM_CRC is not set
-
-
-CONFIG_X86_INTEL_PSTATE=y
-CONFIG_X86_ACPI_CPUFREQ=m
-CONFIG_X86_ACPI_CPUFREQ_CPB=y
-CONFIG_X86_PCC_CPUFREQ=m
-CONFIG_X86_POWERNOW_K8=m
-CONFIG_X86_AMD_FREQ_SENSITIVITY=m
-CONFIG_X86_P4_CLOCKMOD=m
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-
-#
-# various x86 specific drivers
-#
-CONFIG_NVRAM=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
-CONFIG_CRYPTO_DEV_CCP=y
-CONFIG_CRYPTO_DEV_CCP_DD=m
-CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
-CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
-CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
-CONFIG_CRYPTO_DEV_QAT_C3XXX=m
-CONFIG_CRYPTO_DEV_QAT_C62X=m
-CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
-CONFIG_CRYPTO_DEV_QAT_C62XVF=m
-
-CONFIG_GENERIC_ISA_DMA=y
-
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_BIOS=y
-CONFIG_VMD=m
-
-CONFIG_HOTPLUG_PCI_COMPAQ=m
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-CONFIG_HOTPLUG_PCI_IBM=m
-
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-
-CONFIG_BLK_DEV_AMD74XX=y
-
-# I2C_ACPI casues I2C to be built in.  This should probably be fixed.
-CONFIG_I2C=y
-CONFIG_ACPI_I2C_OPREGION=y
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_ISCH=m
-CONFIG_I2C_ISMT=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_NFORCE2_S4985=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_SIS96X=m
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-CONFIG_I2C_DESIGNWARE_CORE=m
-CONFIG_I2C_DESIGNWARE_PLATFORM=m
-CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
-
-#rhbz 997149
-# CONFIG_DELL_RBU is not set
-CONFIG_DCDBAS=m
-
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=m
-# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
-CONFIG_EDAC_AMD64=m
-CONFIG_EDAC_AMD76X=m
-CONFIG_EDAC_AMD8111=m
-CONFIG_EDAC_AMD8131=m
-CONFIG_EDAC_E7XXX=m
-CONFIG_EDAC_E752X=m
-CONFIG_EDAC_I82860=m
-CONFIG_EDAC_I82875P=m
-CONFIG_EDAC_I82975X=m
-CONFIG_EDAC_I3000=m
-CONFIG_EDAC_I3200=m
-CONFIG_EDAC_I5000=m
-CONFIG_EDAC_I5100=m
-CONFIG_EDAC_I5400=m
-CONFIG_EDAC_I7300=m
-CONFIG_EDAC_I7CORE=m
-CONFIG_EDAC_R82600=m
-CONFIG_EDAC_X38=m
-CONFIG_EDAC_MCE_INJ=m
-CONFIG_EDAC_DECODE_MCE=m
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_IE31200=m
-
-CONFIG_SCHED_MC=y
-
-CONFIG_TCG_INFINEON=m
-CONFIG_TCG_CRB=m
-
-CONFIG_HW_RANDOM_INTEL=m
-CONFIG_HW_RANDOM_AMD=m
-CONFIG_HW_RANDOM_VIA=m
-
-# CONFIG_COMPAT_VDSO is not set
-
-CONFIG_X86_PLATFORM_DEVICES=y
-
-CONFIG_AMILO_RFKILL=m
-CONFIG_ASUS_LAPTOP=m
-CONFIG_ASUS_WIRELESS=m
-CONFIG_COMPAL_LAPTOP=m
-CONFIG_DELL_LAPTOP=m
-CONFIG_DELL_RBTN=m
-CONFIG_CHROMEOS_LAPTOP=m
-CONFIG_CHROMEOS_PSTORE=m
-CONFIG_EEEPC_LAPTOP=m
-CONFIG_FUJITSU_TABLET=m
-CONFIG_FUJITSU_LAPTOP=m
-# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
-CONFIG_IDEAPAD_LAPTOP=m
-CONFIG_INTEL_HID_EVENT=m
-CONFIG_MSI_LAPTOP=m
-CONFIG_PANASONIC_LAPTOP=m
-CONFIG_SAMSUNG_LAPTOP=m
-CONFIG_SONY_LAPTOP=m
-CONFIG_TOPSTAR_LAPTOP=m
-
-CONFIG_ACPI_WMI=m
-CONFIG_ACER_WMI=m
-CONFIG_ACERHDF=m
-CONFIG_ALIENWARE_WMI=m
-CONFIG_ASUS_WMI=m
-CONFIG_ASUS_NB_WMI=m
-CONFIG_HP_WIRELESS=m
-CONFIG_HP_WMI=m
-# CONFIG_INTEL_SCU_IPC is not set
-# CONFIG_INTEL_PMC_IPC is not set
-CONFIG_DELL_WMI=m
-CONFIG_DELL_WMI_AIO=m
-CONFIG_DELL_SMO8800=m
-CONFIG_EEEPC_WMI=m
-CONFIG_INTEL_OAKTRAIL=m
-CONFIG_SAMSUNG_Q10=m
-CONFIG_APPLE_GMUX=m
-CONFIG_XO15_EBOOK=m
-CONFIG_INTEL_RST=m
-CONFIG_INTEL_SMARTCONNECT=y
-CONFIG_PVPANIC=m
-
-# CONFIG_TOUCHSCREEN_INTEL_MID is not set
-CONFIG_TOUCHSCREEN_GOODIX=m
-
-# CONFIG_SMSC37B787_WDT is not set
-CONFIG_VIA_WDT=m
-CONFIG_IE6XX_WDT=m
-
-CONFIG_PROC_VMCORE=y
-
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_DEVICE_ASSIGNMENT=y
-CONFIG_LGUEST=m
-CONFIG_LGUEST_GUEST=y
-
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_TIME_ACCOUNTING=y
-# CONFIG_PARAVIRT_DEBUG is not set
-
-# PARAVIRT_SPINLOCKS has a 5% perf hit on native hw (see kconfig)
-# CONFIG_PARAVIRT_SPINLOCKS is not set
-
-CONFIG_KVM_GUEST=y
-CONFIG_KVM_MMU_AUDIT=y # default $x would be nice...
-# CONFIG_KVM_DEBUG_FS is not set
-
-CONFIG_XEN=y
-# CONFIG_XEN_DEBUG is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_SCRUB_PAGES=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_BLKDEV_FRONTEND=m
-CONFIG_XEN_NETDEV_FRONTEND=m
-CONFIG_XEN_NETDEV_BACKEND=m
-CONFIG_XEN_WDT=m
-CONFIG_XEN_GRANT_DEV_ALLOC=m
-CONFIG_XEN_PCIDEV_FRONTEND=m
-CONFIG_XENFS=m
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_BACKEND=y
-CONFIG_XEN_BLKDEV_BACKEND=m
-CONFIG_XEN_DEBUG_FS=y
-CONFIG_XEN_GNTDEV=m
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
-CONFIG_XEN_SELFBALLOONING=y
-CONFIG_XEN_PCIDEV_BACKEND=m
-CONFIG_XEN_ACPI_PROCESSOR=m
-# CONFIG_XEN_SCSI_FRONTEND is not set
-# CONFIG_XEN_SCSI_BACKEND is not set
-CONFIG_XEN_SYMS=y
-
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PXA2XX=m
-# CONFIG_CAN_MCP251X is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-
-CONFIG_MTD_ESB2ROM=m
-CONFIG_MTD_CK804XROM=m
-
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-CONFIG_THINKPAD_ACPI=m
-# CONFIG_THINKPAD_ACPI_DEBUG is not set
-# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
-CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_THINKPAD_ACPI_VIDEO=y
-CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
-# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
-
-CONFIG_MACINTOSH_DRIVERS=y
-
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=y
-
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOATDMA=m
-CONFIG_INTEL_IDMA64=m
-
-CONFIG_SENSORS_I5K_AMB=m
-CONFIG_SENSORS_FAM15H_POWER=m
-CONFIG_SENSORS_ACPI_POWER=m
-CONFIG_SENSORS_I5500=m
-CONFIG_SENSORS_DELL_SMM=m
-
-# CONFIG_CPA_DEBUG is not set
-
-CONFIG_HP_WATCHDOG=m
-CONFIG_NV_TCO=m
-CONFIG_SP5100_TCO=m
-
-# CONFIG_NO_BOOTMEM is not set
-
-# CONFIG_MEMTEST is not set
-# CONFIG_DEBUG_TLBFLUSH is not set
-# CONFIG_MAXSMP is not set
-
-
-CONFIG_HP_ILO=m
-
-CONFIG_BACKLIGHT_APPLE=m
-
-CONFIG_X86_PMEM_LEGACY=y
-
-CONFIG_X86_CHECK_BIOS_CORRUPTION=y
-
-# CONFIG_CMDLINE_BOOL is not set
-
-
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-
-
-# CONFIG_IOMMU_STRESS is not set
-
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-CONFIG_X86_MCE_INJECT=m
-
-CONFIG_SFI=y
-
-CONFIG_I2C_SCMI=m
-CONFIG_SBC_FITPC2_WATCHDOG=m
-
-CONFIG_X86_DECODER_SELFTEST=y
-
-CONFIG_ACPI_CMPC=m
-CONFIG_MSI_WMI=m
-CONFIG_TOSHIBA_BT_RFKILL=m
-CONFIG_TOSHIBA_HAPS=m
-CONFIG_TOSHIBA_WMI=m
-
-CONFIG_VGA_SWITCHEROO=y
-CONFIG_LPC_SCH=m
-CONFIG_LPC_ICH=m
-
-CONFIG_GPIO_ICH=m
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_104_IDI_48 is not set
-
-# These should all go away with IC2_ACPI is fixed
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL6040_CORE is not set
-
-CONFIG_PCI_CNB20LE_QUIRK=y
-
-CONFIG_ACPI_EC_DEBUGFS=m
-# CONFIG_ACPI_APEI_ERST_DEBUG is not set
-
-CONFIG_INTEL_IDLE=y
-
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-CONFIG_F71808E_WDT=m
-CONFIG_HPWDT_NMI_DECODING=y
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_GPIO_INTEL_MID is not set
-CONFIG_PCH_DMA=m
-CONFIG_INTEL_IPS=m
-# CONFIG_IBM_RTL is not set
-
-CONFIG_VIDEO_VIA_CAMERA=m
-
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_X86_RESERVE_LOW=64
-
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-
-CONFIG_PCH_GBE=m
-CONFIG_PCH_PHUB=m
-
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_SERPENT_SSE2_586=m
-CONFIG_CRYPTO_CRC32_PCLMUL=m
-
-CONFIG_HP_ACCEL=m
-
-CONFIG_SURFACE_PRO3_BUTTON=m
-CONFIG_INTEL_PUNIT_IPC=m
-
-# CONFIG_RAPIDIO is not set
-
-CONFIG_SCHED_SMT=y
-CONFIG_CC_STACKPROTECTOR=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
-CONFIG_RELOCATABLE=y
-# CONFIG_RANDOMIZE_BASE is not set # revisit this
-
-CONFIG_HYPERV=m
-CONFIG_HYPERV_UTILS=m
-CONFIG_HID_HYPERV_MOUSE=m
-CONFIG_HYPERV_NET=m
-CONFIG_HYPERV_STORAGE=m
-CONFIG_HYPERV_BALLOON=m
-CONFIG_FB_HYPERV=m
-CONFIG_HYPERV_KEYBOARD=m
-
-# Depends on HOTPLUG_PCI_PCIE
-CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
-
-CONFIG_DRM_GMA500=m
-# CONFIG_DRM_GMA600 is not set
-CONFIG_DRM_GMA3600=y
-
-CONFIG_RCU_FANOUT_LEAF=16
-
-CONFIG_INTEL_MEI=m
-CONFIG_INTEL_MEI_ME=m
-CONFIG_INTEL_MEI_TXE=m
-
-CONFIG_NFC_MEI_PHY=m
-CONFIG_NFC_PN544_MEI=m
-CONFIG_NFC_MICROREAD_MEI=m
-
-# Maybe enable in debug kernels?
-# CONFIG_DEBUG_ENTRY is not set
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-
-# CONFIG_X86_GOLDFISH is not set
-
-CONFIG_X86_INTEL_LPSS=y
-CONFIG_IDMA64=m
-
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-# CONFIG_X86_INTEL_MID is not set
-# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
-
-CONFIG_MFD_INTEL_LPSS_ACPI=m
-CONFIG_MFD_INTEL_LPSS_PCI=m
-
-CONFIG_IOSF_MBI=m
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_PWM_LPSS=m
-CONFIG_PWM_LPSS_PCI=m
-CONFIG_PWM_LPSS_PLATFORM=m
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BAYTRAIL=y
-CONFIG_PINCTRL_CHERRYVIEW=y
-# CONFIG_PINCTRL_AMD is not set
-CONFIG_PINCTRL_SUNRISEPOINT=m
-CONFIG_PINCTRL_BROXTON=m
-
-#baytrail/cherrytrail stuff
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_SOC_BUTTON_ARRAY=m
-CONFIG_SND_SOC_INTEL_SST=m
-CONFIG_SND_SOC_INTEL_SST_ACPI=m
-CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
-CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
-CONFIG_SND_SOC_INTEL_BAYTRAIL=m
-CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH=m
-CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
-CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH=m
-CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
-CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
-CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
-CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
-CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
-CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
-CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
-CONFIG_SND_SOC_AC97_CODEC=m
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-
-# CONFIG_INTEL_POWERCLAMP is not set
-CONFIG_X86_PKG_TEMP_THERMAL=m
-CONFIG_INTEL_SOC_DTS_THERMAL=m
-CONFIG_INT340X_THERMAL=m
-CONFIG_INTEL_RAPL=m
-CONFIG_INTEL_PCH_THERMAL=m
-
-CONFIG_VMWARE_VMCI=m
-CONFIG_VMWARE_VMCI_VSOCKETS=m
-CONFIG_MOUSE_PS2_VMMOUSE=y
-
-CONFIG_XZ_DEC_X86=y
-
-CONFIG_MPILIB=y
-CONFIG_PKCS7_MESSAGE_PARSER=y
-# CONFIG_PKCS7_TEST_KEY is not set
-CONFIG_SIGNED_PE_FILE_VERIFICATION=y
-CONFIG_SYSTEM_TRUSTED_KEYRING=y
-CONFIG_SYSTEM_BLACKLIST_KEYRING=y
-CONFIG_MODULE_SIG=y
-CONFIG_MODULE_SIG_ALL=y
-# CONFIG_MODULE_SIG_SHA1 is not set
-CONFIG_MODULE_SIG_SHA256=y
-# CONFIG_MODULE_SIG_FORCE is not set
-CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE=y
-CONFIG_EFI_SIGNATURE_LIST_PARSER=y
-
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_KEXEC_VERIFY_SIG is not set
-
-CONFIG_MODULE_SIG_UEFI=y
-
-CONFIG_VMXNET3=m
-CONFIG_FUJITSU_ES=m
-CONFIG_VFIO_PCI_VGA=y
-
-CONFIG_PCH_CAN=m
-
-# CONFIG_X86_DEBUG_FPU is not set
-# CONFIG_PUNIT_ATOM_DEBUG is not set
-# CONFIG_AMD_MCE_INJ is not set

config-x86_64-generic

@@ -1,233 +0,0 @@
-CONFIG_64BIT=y
-
-# CONFIG_X86_X32 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MPSC is not set
-CONFIG_GENERIC_CPU=y
-
-# CONFIG_X86_VSMP is not set
-CONFIG_X86_UV=y
-CONFIG_UV_MMTIMER=m
-CONFIG_NUMA=y
-CONFIG_AMD_NUMA=y
-CONFIG_X86_64_ACPI_NUMA=y
-CONFIG_ACPI_NFIT=m
-# CONFIG_ACPI_NFIT_DEBUG is not set
-# CONFIG_NUMA_EMU is not set
-CONFIG_X86_NUMACHIP=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_NUMA_BALANCING=y
-
-# https://lists.fedoraproject.org/pipermail/kernel/2013-November/004601.html
-CONFIG_NR_CPUS=1024
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_PHYSICAL_ALIGN=0x1000000
-
-# https://lists.fedoraproject.org/pipermail/kernel/2013-December/004753.html
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
-
-# enable the 32-bit entry point for Baytrail
-CONFIG_EFI_MIXED=y
-
-CONFIG_IA32_EMULATION=y
-# CONFIG_IA32_AOUT is not set
-
-CONFIG_AMD_IOMMU=y
-CONFIG_AMD_IOMMU_STATS=y
-CONFIG_AMD_IOMMU_V2=m
-# CONFIG_IOMMU_DEBUG is not set
-CONFIG_SWIOTLB=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_GART_IOMMU is not set
-
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_MEM_SOFT_DIRTY=y
-
-CONFIG_KEXEC_JUMP=y
-CONFIG_KEXEC_FILE=y
-CONFIG_KEXEC_VERIFY_SIG=y
-CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
-
-CONFIG_ACPI_HOTPLUG_MEMORY=y
-
-# CONFIG_INTEL_SCU_IPC is not set
-
-CONFIG_SCIF_BUS=m
-CONFIG_SCIF=m
-
-CONFIG_INTEL_MIC_HOST=m
-CONFIG_INTEL_MIC_CARD=m
-CONFIG_INTEL_MIC_BUS=m
-CONFIG_INTEL_MIC_X100_DMA=m
-CONFIG_MIC_COSM=m
-
-# SHPC has half-arsed PCI probing, which makes it load on too many systems
-CONFIG_HOTPLUG_PCI_SHPC=m
-
-# CONFIG_CRYPTO_SHA1_MB is not set
-CONFIG_CRYPTO_AES_X86_64=y
-CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
-CONFIG_CRYPTO_TWOFISH_X86_64=m
-CONFIG_CRYPTO_SALSA20_X86_64=m
-CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
-CONFIG_CRYPTO_SHA1_SSSE3=m
-CONFIG_CRYPTO_SHA256_SSSE3=m
-CONFIG_CRYPTO_SHA512_SSSE3=m
-CONFIG_CRYPTO_BLOWFISH_X86_64=m
-CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
-CONFIG_CRYPTO_CAMELLIA_X86_64=m
-CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
-CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
-CONFIG_CRYPTO_CAST5_AVX_X86_64=m
-CONFIG_CRYPTO_CAST6_AVX_X86_64=m
-CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
-CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
-CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
-CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
-CONFIG_CRYPTO_DES3_EDE_X86_64=m
-CONFIG_CRYPTO_POLY1305_X86_64=m
-CONFIG_CRYPTO_CHACHA20_X86_64=m
-# staging crypto
-# CONFIG_CRYPTO_SKEIN is not set
-
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-
-CONFIG_EDAC_AMD64=m
-# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
-CONFIG_EDAC_SBRIDGE=m
-
-# CONFIG_PC8736x_GPIO is not set
-
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-# CONFIG_MOVABLE_NODE is not set
-CONFIG_MEMORY_HOTPLUG=y
-# CONFIG_ARCH_MEMORY_PROBE is not set
-CONFIG_MEMORY_HOTREMOVE=y
-# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set 
-
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-
-CONFIG_SGI_IOC4=m
-CONFIG_SGI_XP=m
-CONFIG_SGI_GRU=m
-# CONFIG_SGI_GRU_DEBUG is not set
-
-# CONFIG_VIDEO_CAFE_CCIC is not set
-
-CONFIG_XEN_MAX_DOMAIN_MEMORY=128
-# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
-CONFIG_XEN_DEV_EVTCHN=m
-CONFIG_XEN_SYS_HYPERVISOR=y
-# CONFIG_XEN_MCE_LOG is not set
-# CONFIG_XEN_STUB is not set
-CONFIG_XEN_PVH=y
-CONFIG_XEN_512GB=y
-
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-
-CONFIG_FRAME_WARN=2048
-
-CONFIG_NODES_SHIFT=9
-
-CONFIG_DIRECT_GBPAGES=y
-
-CONFIG_X86_MPPARSE=y
-
-CONFIG_I7300_IDLE=m
-CONFIG_IRQ_REMAP=y
-
-CONFIG_X86_X2APIC=y
-CONFIG_SPARSE_IRQ=y
-
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_USER_QS is not set
-
-CONFIG_INTEL_TXT=y
-
-# CONFIG_OF is not set
-
-CONFIG_FUNCTION_GRAPH_TRACER=y
-
-CONFIG_I7300_IDLE=m
-
-# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
-CONFIG_CHECKPOINT_RESTORE=y
-
-# Should be 32bit only, but lacks KConfig depends
-# CONFIG_XO15_EBOOK is not set
-
-CONFIG_THUNDERBOLT=m
-
-CONFIG_NTB=m
-CONFIG_NTB_NETDEV=m
-CONFIG_NTB_AMD=m
-CONFIG_NTB_INTEL=m
-CONFIG_NTB_PINGPONG=m
-CONFIG_NTB_PERF=m
-CONFIG_NTB_TOOL=m
-CONFIG_NTB_TRANSPORT=m
-
-# 10GigE
-#
-CONFIG_IP1000=m
-CONFIG_SFC=m
-CONFIG_SFC_MCDI_MON=y
-CONFIG_SFC_SRIOV=y
-CONFIG_SFC_MTD=y
-# CONFIG_SFC_MCDI_LOGGING is not set
-# Override MTD stuff because SFC_MTD needs it
-CONFIG_MTD_BLOCK=m
-
-CONFIG_HSA_AMD=m
-
-CONFIG_LIBNVDIMM=m
-CONFIG_BTT=y
-CONFIG_ND_BTT=m
-CONFIG_ND_BLK=m
-
-CONFIG_MDIO_OCTEON=m
-
-CONFIG_NO_HZ_FULL=y
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NO_HZ_FULL_ALL is not set
-# CONFIG_NO_HZ_FULL_SYSIDLE is not set
-# CONFIG_CONTEXT_TRACKING_FORCE is not set
-
-# Turn on CONFIG_CMA for THP
-CONFIG_CMA=y
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_AREAS=7
-
-# Changes for persistent memory devices
-# ZONE_DMA and ZONE_DEVICE can now co-exist
-CONFIG_ZONE_DMA=y
-CONFIG_ZONE_DEVICE=y
-CONFIG_NVDIMM_PFN=y
-CONFIG_ND_PFN=m
-
-# Staging
-CONFIG_STAGING_RDMA=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_INFINIBAND_EHCA is not set
-CONFIG_INFINIBAND_HFI1=m
-# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
-CONFIG_HFI1_VERBS_31BIT_PSN=y
-# CONFIG_SDMA_VERBOSITY is not set
-# CONFIG_PRESCAN_RXQ is not set

crash-driver.patch

@@ -1,506 +0,0 @@
-From: Dave Anderson <anderson@redhat.com>
-Date: Tue, 26 Nov 2013 12:42:46 -0500
-Subject: [PATCH] crash-driver
-
-Bugzilla: N/A
-Upstream-status: Fedora mustard
----
- arch/arm/include/asm/crash-driver.h     |   6 ++
- arch/arm64/include/asm/crash-driver.h   |   6 ++
- arch/ia64/include/asm/crash-driver.h    |  90 ++++++++++++++++++++++
- arch/ia64/kernel/ia64_ksyms.c           |   3 +
- arch/powerpc/include/asm/crash-driver.h |   6 ++
- arch/s390/include/asm/crash-driver.h    |  60 +++++++++++++++
- arch/s390/mm/maccess.c                  |   2 +
- arch/x86/include/asm/crash-driver.h     |   6 ++
- drivers/char/Kconfig                    |   3 +
- drivers/char/Makefile                   |   2 +
- drivers/char/crash.c                    | 128 ++++++++++++++++++++++++++++++++
- include/asm-generic/crash-driver.h      |  72 ++++++++++++++++++
- 12 files changed, 384 insertions(+)
- create mode 100644 arch/arm/include/asm/crash-driver.h
- create mode 100644 arch/arm64/include/asm/crash-driver.h
- create mode 100644 arch/ia64/include/asm/crash-driver.h
- create mode 100644 arch/powerpc/include/asm/crash-driver.h
- create mode 100644 arch/s390/include/asm/crash-driver.h
- create mode 100644 arch/x86/include/asm/crash-driver.h
- create mode 100644 drivers/char/crash.c
- create mode 100644 include/asm-generic/crash-driver.h
-
-diff --git a/arch/arm/include/asm/crash-driver.h b/arch/arm/include/asm/crash-driver.h
-new file mode 100644
-index 000000000000..06e7ae916601
---- /dev/null
-+++ b/arch/arm/include/asm/crash-driver.h
-@@ -0,0 +1,6 @@
-+#ifndef _ARM_CRASH_H
-+#define _ARM_CRASH_H
-+
-+#include <asm-generic/crash-driver.h>
-+
-+#endif /* _ARM_CRASH_H */
-diff --git a/arch/arm64/include/asm/crash-driver.h b/arch/arm64/include/asm/crash-driver.h
-new file mode 100644
-index 000000000000..43b26da0c5d6
---- /dev/null
-+++ b/arch/arm64/include/asm/crash-driver.h
-@@ -0,0 +1,6 @@
-+#ifndef _ARM64_CRASH_H
-+#define _ARM64_CRASH_H
-+
-+#include <asm-generic/crash-driver.h>
-+
-+#endif /* _ARM64_CRASH_H */
-diff --git a/arch/ia64/include/asm/crash-driver.h b/arch/ia64/include/asm/crash-driver.h
-new file mode 100644
-index 000000000000..404bcb93c112
---- /dev/null
-+++ b/arch/ia64/include/asm/crash-driver.h
-@@ -0,0 +1,90 @@
-+#ifndef _ASM_IA64_CRASH_H
-+#define _ASM_IA64_CRASH_H
-+
-+/*
-+ * linux/include/asm-ia64/crash-driver.h
-+ *
-+ * Copyright (c) 2004 Red Hat, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/efi.h>
-+#include <linux/mm.h>
-+#include <asm/mmzone.h>
-+
-+static inline void *
-+map_virtual(u64 offset, struct page **pp)
-+{
-+	struct page *page;
-+	unsigned long pfn;
-+	u32 type;
-+
-+	if (REGION_NUMBER(offset) == 5) {
-+		char byte;
-+
-+		if (__get_user(byte, (char *)offset) == 0)
-+			return (void *)offset;
-+		else
-+			return NULL;
-+	}
-+
-+	switch (type = efi_mem_type(offset))
-+	{
-+	case EFI_LOADER_CODE:
-+	case EFI_LOADER_DATA:
-+	case EFI_BOOT_SERVICES_CODE:
-+	case EFI_BOOT_SERVICES_DATA:
-+	case EFI_CONVENTIONAL_MEMORY:
-+		break;
-+
-+	default:
-+		printk(KERN_INFO
-+		    "crash memory driver: invalid memory type for %lx: %d\n",
-+			offset, type);
-+		return NULL;
-+	}
-+
-+	pfn = offset >> PAGE_SHIFT;
-+
-+	if (!pfn_valid(pfn)) {
-+		printk(KERN_INFO
-+			"crash memory driver: invalid pfn: %lx )\n", pfn);
-+		return NULL;
-+	}
-+
-+	page = pfn_to_page(pfn);
-+
-+	if (!page->virtual) {
-+		printk(KERN_INFO
-+		    "crash memory driver: offset: %lx page: %lx page->virtual: NULL\n",
-+			offset, (unsigned long)page);
-+		return NULL;
-+	}
-+
-+	return (page->virtual + (offset & (PAGE_SIZE-1)));
-+}
-+
-+static inline void unmap_virtual(struct page *page)
-+{
-+	return;
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_IA64_CRASH_H */
-diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
-index 096731049538..e88887827906 100644
---- a/arch/ia64/kernel/ia64_ksyms.c
-+++ b/arch/ia64/kernel/ia64_ksyms.c
-@@ -84,6 +84,9 @@ EXPORT_SYMBOL(ia64_save_scratch_fpregs);
- #include <asm/unwind.h>
- EXPORT_SYMBOL(unw_init_running);
- 
-+#include <linux/efi.h>
-+EXPORT_SYMBOL_GPL(efi_mem_type);
-+
- #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
- extern void esi_call_phys (void);
- EXPORT_SYMBOL_GPL(esi_call_phys);
-diff --git a/arch/powerpc/include/asm/crash-driver.h b/arch/powerpc/include/asm/crash-driver.h
-new file mode 100644
-index 000000000000..50092d965dc5
---- /dev/null
-+++ b/arch/powerpc/include/asm/crash-driver.h
-@@ -0,0 +1,6 @@
-+#ifndef _PPC64_CRASH_H
-+#define _PPC64_CRASH_H
-+
-+#include <asm-generic/crash-driver.h>
-+
-+#endif /* _PPC64_CRASH_H */
-diff --git a/arch/s390/include/asm/crash-driver.h b/arch/s390/include/asm/crash-driver.h
-new file mode 100644
-index 000000000000..552be5e2c571
---- /dev/null
-+++ b/arch/s390/include/asm/crash-driver.h
-@@ -0,0 +1,60 @@
-+#ifndef _S390_CRASH_H
-+#define _S390_CRASH_H
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+
-+/*
-+ * For swapped prefix pages get bounce buffer using xlate_dev_mem_ptr()
-+ */
-+static inline void *map_virtual(u64 offset, struct page **pp)
-+{
-+	struct page *page;
-+	unsigned long pfn;
-+	void *vaddr;
-+
-+	vaddr = xlate_dev_mem_ptr(offset);
-+	pfn = ((unsigned long) vaddr) >> PAGE_SHIFT;
-+	if ((unsigned long) vaddr != offset)
-+		page = pfn_to_page(pfn);
-+	else
-+		page = NULL;
-+
-+	if (!page_is_ram(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
-+		return NULL;
-+	}
-+
-+	if (!pfn_valid(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: invalid pfn: %lx )\n", pfn);
-+		return NULL;
-+	}
-+
-+	*pp = page;
-+	return vaddr;
-+}
-+
-+/*
-+ * Free bounce buffer if necessary
-+ */
-+static inline void unmap_virtual(struct page *page)
-+{
-+	void *vaddr;
-+
-+	if (page) {
-+		/*
-+		 * Because for bounce buffers vaddr will never be 0
-+		 * unxlate_dev_mem_ptr() will always free the bounce buffer.
-+		 */
-+		vaddr = (void *)(page_to_pfn(page) << PAGE_SHIFT);
-+		unxlate_dev_mem_ptr(0, vaddr);
-+	}
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _S390_CRASH_H */
-diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
-index 8a993a53fcd6..8f511795b52e 100644
---- a/arch/s390/mm/maccess.c
-+++ b/arch/s390/mm/maccess.c
-@@ -197,6 +197,7 @@ void *xlate_dev_mem_ptr(phys_addr_t addr)
- 	put_online_cpus();
- 	return bounce;
- }
-+EXPORT_SYMBOL_GPL(xlate_dev_mem_ptr);
- 
- /*
-  * Free converted buffer for /dev/mem access (if necessary)
-@@ -206,3 +207,4 @@ void unxlate_dev_mem_ptr(phys_addr_t addr, void *buf)
- 	if ((void *) addr != buf)
- 		free_page((unsigned long) buf);
- }
-+EXPORT_SYMBOL_GPL(unxlate_dev_mem_ptr);
-diff --git a/arch/x86/include/asm/crash-driver.h b/arch/x86/include/asm/crash-driver.h
-new file mode 100644
-index 000000000000..fd4736ec99f5
---- /dev/null
-+++ b/arch/x86/include/asm/crash-driver.h
-@@ -0,0 +1,6 @@
-+#ifndef _X86_CRASH_H
-+#define _X86_CRASH_H
-+
-+#include <asm-generic/crash-driver.h>
-+
-+#endif /* _X86_CRASH_H */
-diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
-index a043107da2af..b272397f306a 100644
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -4,6 +4,9 @@
- 
- menu "Character devices"
- 
-+config CRASH
-+	tristate "Crash Utility memory driver"
-+
- source "drivers/tty/Kconfig"
- 
- config DEVMEM
-diff --git a/drivers/char/Makefile b/drivers/char/Makefile
-index d8a7579300d2..31c83630f593 100644
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -60,3 +60,5 @@ js-rtc-y = rtc.o
- 
- obj-$(CONFIG_TILE_SROM)		+= tile-srom.o
- obj-$(CONFIG_XILLYBUS)		+= xillybus/
-+
-+obj-$(CONFIG_CRASH)            += crash.o
-diff --git a/drivers/char/crash.c b/drivers/char/crash.c
-new file mode 100644
-index 000000000000..085378a1d539
---- /dev/null
-+++ b/drivers/char/crash.c
-@@ -0,0 +1,128 @@
-+/*
-+ *  linux/drivers/char/crash.c
-+ *
-+ *  Copyright (C) 2004  Dave Anderson <anderson@redhat.com>
-+ *  Copyright (C) 2004  Red Hat, Inc.
-+ */
-+
-+/******************************************************************************
-+ *
-+ *   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2, or (at your option)
-+ *   any later version.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *****************************************************************************/
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/types.h>
-+#include <asm/crash-driver.h>
-+
-+#define CRASH_VERSION   "1.0"
-+
-+/*
-+ *  These are the file operation functions that allow crash utility
-+ *  access to physical memory.
-+ */
-+
-+static loff_t
-+crash_llseek(struct file * file, loff_t offset, int orig)
-+{
-+	switch (orig) {
-+	case 0:
-+		file->f_pos = offset;
-+		return file->f_pos;
-+	case 1:
-+		file->f_pos += offset;
-+		return file->f_pos;
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+/*
-+ *  Determine the page address for an address offset value,
-+ *  get a virtual address for it, and copy it out.
-+ *  Accesses must fit within a page.
-+ */
-+static ssize_t
-+crash_read(struct file *file, char *buf, size_t count, loff_t *poff)
-+{
-+	void *vaddr;
-+	struct page *page;
-+	u64 offset;
-+	ssize_t read;
-+
-+	offset = *poff;
-+	if (offset >> PAGE_SHIFT != (offset+count-1) >> PAGE_SHIFT)
-+		return -EINVAL;
-+
-+	vaddr = map_virtual(offset, &page);
-+	if (!vaddr)
-+		return -EFAULT;
-+
-+	if (copy_to_user(buf, vaddr, count)) {
-+		unmap_virtual(page);
-+		return -EFAULT;
-+	}
-+	unmap_virtual(page);
-+
-+	read = count;
-+	*poff += read;
-+	return read;
-+}
-+
-+static struct file_operations crash_fops = {
-+	.owner = THIS_MODULE,
-+	.llseek = crash_llseek,
-+	.read = crash_read,
-+};
-+
-+static struct miscdevice crash_dev = {
-+	MISC_DYNAMIC_MINOR,
-+	"crash",
-+	&crash_fops
-+};
-+
-+static int __init
-+crash_init(void)
-+{
-+	int ret;
-+
-+	ret = misc_register(&crash_dev);
-+	if (ret) {
-+		printk(KERN_ERR
-+		    "crash memory driver: cannot misc_register (MISC_DYNAMIC_MINOR)\n");
-+		goto out;
-+	}
-+
-+	ret = 0;
-+	printk(KERN_INFO "crash memory driver: version %s\n", CRASH_VERSION);
-+out:
-+	return ret;
-+}
-+
-+static void __exit
-+crash_cleanup_module(void)
-+{
-+	misc_deregister(&crash_dev);
-+}
-+
-+module_init(crash_init);
-+module_exit(crash_cleanup_module);
-+
-+MODULE_LICENSE("GPL");
-diff --git a/include/asm-generic/crash-driver.h b/include/asm-generic/crash-driver.h
-new file mode 100644
-index 000000000000..25ab9869d566
---- /dev/null
-+++ b/include/asm-generic/crash-driver.h
-@@ -0,0 +1,72 @@
-+#ifndef __CRASH_H__
-+#define __CRASH_H__
-+
-+/*
-+ * include/linux/crash-driver.h
-+ *
-+ * Copyright (c) 2013 Red Hat, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#ifdef __KERNEL__
-+
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+
-+static inline void *
-+map_virtual(u64 offset, struct page **pp)
-+{
-+	struct page *page;
-+	unsigned long pfn;
-+	void *vaddr;
-+
-+	pfn = (unsigned long)(offset >> PAGE_SHIFT);
-+
-+	if (!page_is_ram(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: !page_is_ram(pfn: %lx)\n", pfn);
-+		return NULL;
-+	}
-+
-+	if (!pfn_valid(pfn)) {
-+		printk(KERN_INFO
-+		    "crash memory driver: invalid pfn: %lx )\n", pfn);
-+		return NULL;
-+	}
-+
-+	page = pfn_to_page(pfn);
-+
-+	vaddr = kmap(page);
-+	if (!vaddr) {
-+		printk(KERN_INFO
-+		    "crash memory driver: pfn: %lx kmap(page: %lx) failed\n",
-+			pfn, (unsigned long)page);
-+		return NULL;
-+	}
-+
-+	*pp = page;
-+	return (vaddr + (offset & (PAGE_SIZE-1)));
-+}
-+
-+static inline void unmap_virtual(struct page *page)
-+{
-+	kunmap(page);
-+}
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* __CRASH_H__ */

criu-no-expert.patch

@@ -1,32 +0,0 @@
-From: "kernel-team@fedoraproject.org" <kernel-team@fedoraproject.org>
-Date: Wed, 30 Jan 2013 10:55:31 -0500
-Subject: [PATCH] criu: no expert
-
-Bugzilla: N/A
-Upstream-status: Fedora mustard
----
- init/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/init/Kconfig b/init/Kconfig
-index 648bb79d6b73..860ca236975f 100644
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1137,7 +1137,7 @@ config CGROUP_WRITEBACK
- endif # CGROUPS
- 
- config CHECKPOINT_RESTORE
--	bool "Checkpoint/restore support" if EXPERT
-+	bool "Checkpoint/restore support"
- 	select PROC_CHILDREN
- 	default n
- 	help
-@@ -1149,7 +1149,7 @@ config CHECKPOINT_RESTORE
- 	  If unsure, say N here.
- 
- menuconfig NAMESPACES
--	bool "Namespaces support" if EXPERT
-+	bool "Namespaces support"
- 	depends on MULTIUSER
- 	default !EXPERT
- 	help

die-floppy-die.patch

@@ -1,29 +0,0 @@
-From: Kyle McMartin <kyle@phobos.i.jkkm.org>
-Date: Tue, 30 Mar 2010 00:04:29 -0400
-Subject: [PATCH] die-floppy-die
-
-Kill the floppy.ko pnp modalias. We were surviving just fine without
-autoloading floppy drivers, tyvm.
-
-Please feel free to register all complaints in the wastepaper bin.
-
-Bugzilla: N/A
-Upstream-status: Fedora mustard
----
- drivers/block/floppy.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
-index a08cda955285..e320e1e679cf 100644
---- a/drivers/block/floppy.c
-+++ b/drivers/block/floppy.c
-@@ -4633,8 +4633,7 @@ static const struct pnp_device_id floppy_pnpids[] = {
- 	{"PNP0700", 0},
- 	{}
- };
--
--MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
-+/* MODULE_DEVICE_TABLE(pnp, floppy_pnpids); */
- 
- #else
- 

disable-CONFIG_EXPERT-for-ZONE_DMA.patch

@@ -1,43 +0,0 @@
-From 888ba9b2a02e8d144c3a9ae5e01a1a94280cd2bf Mon Sep 17 00:00:00 2001
-From: Fedora Kernel Team <kernel-team@fedoraproject.org>
-Date: Fri, 22 Jan 2016 13:03:36 -0600
-Subject: [PATCH] Make ZONE_DMA not depend on CONFIG_EXPERT
-
-Disable the requirement on CONFIG_EXPERT for ZONE_DMA and ZONE_DEVICE so
-that we can enable NVDIMM_PFN and ND_PFN
-
-Signed-off-by: Justin Forbes <jforbes@fedoraproject.org>
----
- arch/x86/Kconfig | 2 +-
- mm/Kconfig       | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
-index a02c842..ea2eaeb 100644
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -315,7 +315,7 @@ source "kernel/Kconfig.freezer"
- menu "Processor type and features"
-
- config ZONE_DMA
--	bool "DMA memory allocation support" if EXPERT
-+	bool "DMA memory allocation support"
- 	default y
- 	help
- 	  DMA memory allocation support allows devices with less than 32-bit
-diff --git a/mm/Kconfig b/mm/Kconfig
-index 97a4e06..26bbbe0 100644
---- a/mm/Kconfig
-+++ b/mm/Kconfig
-@@ -650,7 +650,7 @@ config IDLE_PAGE_TRACKING
- 	  See Documentation/vm/idle_page_tracking.txt for more details.
-
- config ZONE_DEVICE
--	bool "Device memory (pmem, etc...) hotplug support" if EXPERT
-+	bool "Device memory (pmem, etc...) hotplug support"
- 	default !ZONE_DMA
- 	depends on !ZONE_DMA
- 	depends on MEMORY_HOTPLUG
--- 
-2.5.0
-

disable-i8042-check-on-apple-mac.patch

@@ -1,62 +0,0 @@
-From 31e64826785b5bafef7a6361516c060be2bca253 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Thu, 20 May 2010 10:30:31 -0400
-Subject: [PATCH] disable i8042 check on apple mac
-
-As those computers never had any i8042 controllers, and the
-current lookup code could potentially lock up/hang/wait for
-timeout for long periods of time.
-
-Fixes intermittent hangs on boot on a MacbookAir1,1
-
-Bugzilla: N/A
-Upstream-status: http://lkml.indiana.edu/hypermail/linux/kernel/1005.0/00938.html (and pinged on Dec 17, 2013)
-
-Signed-off-by: Bastien Nocera <hadess@hadess.net>
----
- drivers/input/serio/i8042.c | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
-diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
-index c9c98f0ab284..5137185e14a9 100644
---- a/drivers/input/serio/i8042.c
-+++ b/drivers/input/serio/i8042.c
-@@ -1540,6 +1540,22 @@ static struct notifier_block i8042_kbd_bind_notifier_block = {
- 	.notifier_call = i8042_kbd_bind_notifier,
- };
- 
-+#ifdef CONFIG_DMI
-+static struct dmi_system_id __initdata dmi_system_table[] = {
-+	{
-+		.matches = {
-+			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Computer, Inc.")
-+		},
-+	},
-+	{
-+		.matches = {
-+			DMI_MATCH(DMI_BIOS_VENDOR, "Apple Inc.")
-+		},
-+	},
-+	{}
-+};
-+#endif /*CONFIG_DMI*/
-+
- static int __init i8042_init(void)
- {
- 	struct platform_device *pdev;
-@@ -1547,6 +1563,12 @@ static int __init i8042_init(void)
- 
- 	dbg_init();
- 
-+#ifdef CONFIG_DMI
-+	/* Intel Apple Macs never have an i8042 controller */
-+	if (dmi_check_system(dmi_system_table) > 0)
-+		return -ENODEV;
-+#endif /*CONFIG_DMI*/
-+
- 	err = i8042_platform_init();
- 	if (err)
- 		return err;
--- 
-2.4.3
-

drm-i915-hush-check-crtc-state.patch

@@ -1,32 +0,0 @@
-From 02f47b49ab1cdbe62ceb71b658e2c469799ae368 Mon Sep 17 00:00:00 2001
-From: Adam Jackson <ajax@redhat.com>
-Date: Wed, 13 Nov 2013 10:17:24 -0500
-Subject: [PATCH] drm/i915: hush check crtc state
-
-This is _by far_ the most common backtrace for i915 on retrace.fp.o, and
-it's mostly useless noise.  There's not enough context when it's generated
-to know if something actually went wrong.  Downgrade the message to
-KMS debugging so we can still get it if we want it.
-
-Bugzilla: 1027037 1028785
-Upstream-status: http://lists.freedesktop.org/archives/intel-gfx/2013-November/035948.html
----
- drivers/gpu/drm/i915/intel_display.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
-index ca9278be49f7..308ac0539a87 100644
---- a/drivers/gpu/drm/i915/intel_display.c
-+++ b/drivers/gpu/drm/i915/intel_display.c
-@@ -12688,7 +12688,7 @@ check_crtc_state(struct drm_device *dev, struct drm_atomic_state *old_state)
- 		sw_config = to_intel_crtc_state(crtc->state);
- 		if (!intel_pipe_config_compare(dev, sw_config,
- 					       pipe_config, false)) {
--			I915_STATE_WARN(1, "pipe state doesn't match!\n");
-+			DRM_DEBUG_KMS("pipe state doesn't match!\n");
- 			intel_dump_pipe_config(intel_crtc, pipe_config,
- 					       "[hw state]");
- 			intel_dump_pipe_config(intel_crtc, sw_config,
--- 
-2.4.3
-

drm-i915-turn-off-wc-mmaps.patch

@@ -1,21 +0,0 @@
-From: Dave Airlie <airlied@redhat.com>
-Date: Thu, 4 Jun 2015 07:12:20 -0400
-Subject: [PATCH] drm: i915: turn off wc mmaps
-
----
- drivers/gpu/drm/i915/i915_dma.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
-index d2df321ba634..775a5b11a366 100644
---- a/drivers/gpu/drm/i915/i915_dma.c
-+++ b/drivers/gpu/drm/i915/i915_dma.c
-@@ -151,7 +151,7 @@ static int i915_getparam(struct drm_device *dev, void *data,
- 		value = 1;
- 		break;
- 	case I915_PARAM_MMAP_VERSION:
--		value = 1;
-+		value = 0;
- 		break;
- 	case I915_PARAM_SUBSLICE_TOTAL:
- 		value = INTEL_INFO(dev)->subslice_total;

drm-nouveau-platform-Fix-deferred-probe.patch

@@ -1,116 +0,0 @@
-From patchwork Wed Feb 24 17:34:43 2016
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: drm/nouveau: platform: Fix deferred probe
-From: Thierry Reding <thierry.reding@gmail.com>
-X-Patchwork-Id: 587554
-Message-Id: <1456335283-22097-1-git-send-email-thierry.reding@gmail.com>
-To: Ben Skeggs <bskeggs@redhat.com>
-Cc: Alexandre Courbot <gnurou@gmail.com>, Nicolas Chauvet <kwizart@gmail.com>,
- dri-devel@lists.freedesktop.org, linux-tegra@vger.kernel.org
-Date: Wed, 24 Feb 2016 18:34:43 +0100
-
-From: Thierry Reding <treding@nvidia.com>
-
-The error cleanup paths aren't quite correct and will crash upon
-deferred probe.
-
-Cc: stable@vger.kernel.org # v4.3+
-Signed-off-by: Thierry Reding <treding@nvidia.com>
-Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
-Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
----
- drivers/gpu/drm/nouveau/nouveau_platform.c         |  2 +-
- drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c | 40 ++++++++++++++++------
- 2 files changed, 30 insertions(+), 12 deletions(-)
-
-diff --git a/drivers/gpu/drm/nouveau/nouveau_platform.c b/drivers/gpu/drm/nouveau/nouveau_platform.c
-index 8a70cec59bcd..2dfe58af12e4 100644
---- a/drivers/gpu/drm/nouveau/nouveau_platform.c
-+++ b/drivers/gpu/drm/nouveau/nouveau_platform.c
-@@ -24,7 +24,7 @@
- static int nouveau_platform_probe(struct platform_device *pdev)
- {
- 	const struct nvkm_device_tegra_func *func;
--	struct nvkm_device *device;
-+	struct nvkm_device *device = NULL;
- 	struct drm_device *drm;
- 	int ret;
- 
-diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c
-index 7f8a42721eb2..e7e581d6a8ff 100644
---- a/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c
-+++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c
-@@ -252,32 +252,40 @@ nvkm_device_tegra_new(const struct nvkm_device_tegra_func *func,
- 
- 	if (!(tdev = kzalloc(sizeof(*tdev), GFP_KERNEL)))
- 		return -ENOMEM;
--	*pdevice = &tdev->device;
-+
- 	tdev->func = func;
- 	tdev->pdev = pdev;
- 	tdev->irq = -1;
- 
- 	tdev->vdd = devm_regulator_get(&pdev->dev, "vdd");
--	if (IS_ERR(tdev->vdd))
--		return PTR_ERR(tdev->vdd);
-+	if (IS_ERR(tdev->vdd)) {
-+		ret = PTR_ERR(tdev->vdd);
-+		goto free;
-+	}
- 
- 	tdev->rst = devm_reset_control_get(&pdev->dev, "gpu");
--	if (IS_ERR(tdev->rst))
--		return PTR_ERR(tdev->rst);
-+	if (IS_ERR(tdev->rst)) {
-+		ret = PTR_ERR(tdev->rst);
-+		goto free;
-+	}
- 
- 	tdev->clk = devm_clk_get(&pdev->dev, "gpu");
--	if (IS_ERR(tdev->clk))
--		return PTR_ERR(tdev->clk);
-+	if (IS_ERR(tdev->clk)) {
-+		ret = PTR_ERR(tdev->clk);
-+		goto free;
-+	}
- 
- 	tdev->clk_pwr = devm_clk_get(&pdev->dev, "pwr");
--	if (IS_ERR(tdev->clk_pwr))
--		return PTR_ERR(tdev->clk_pwr);
-+	if (IS_ERR(tdev->clk_pwr)) {
-+		ret = PTR_ERR(tdev->clk_pwr);
-+		goto free;
-+	}
- 
- 	nvkm_device_tegra_probe_iommu(tdev);
- 
- 	ret = nvkm_device_tegra_power_up(tdev);
- 	if (ret)
--		return ret;
-+		goto remove;
- 
- 	tdev->gpu_speedo = tegra_sku_info.gpu_speedo_value;
- 	ret = nvkm_device_ctor(&nvkm_device_tegra_func, NULL, &pdev->dev,
-@@ -285,9 +293,19 @@ nvkm_device_tegra_new(const struct nvkm_device_tegra_func *func,
- 			       cfg, dbg, detect, mmio, subdev_mask,
- 			       &tdev->device);
- 	if (ret)
--		return ret;
-+		goto powerdown;
-+
-+	*pdevice = &tdev->device;
- 
- 	return 0;
-+
-+powerdown:
-+	nvkm_device_tegra_power_down(tdev);
-+remove:
-+	nvkm_device_tegra_remove_iommu(tdev);
-+free:
-+	kfree(tdev);
-+	return ret;
- }
- #else
- int

drm-udl-Use-unlocked-gem-unreferencing.patch

@@ -1,58 +0,0 @@
-From patchwork Mon Nov 23 09:32:42 2015
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [09/29] drm/udl: Use unlocked gem unreferencing
-From: Daniel Vetter <daniel.vetter@ffwll.ch>
-X-Patchwork-Id: 65722
-Message-Id: <1448271183-20523-10-git-send-email-daniel.vetter@ffwll.ch>
-To: DRI Development <dri-devel@lists.freedesktop.org>
-Cc: Daniel Vetter <daniel.vetter@intel.com>,
- Daniel Vetter <daniel.vetter@ffwll.ch>,
- Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
- Dave Airlie <airlied@redhat.com>
-Date: Mon, 23 Nov 2015 10:32:42 +0100
-
-For drm_gem_object_unreference callers are required to hold
-dev->struct_mutex, which these paths don't. Enforcing this requirement
-has become a bit more strict with
-
-commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
-Author: Daniel Vetter <daniel.vetter@ffwll.ch>
-Date:   Thu Oct 15 09:36:25 2015 +0200
-
-    drm/gem: Check locking in drm_gem_object_unreference
-
-Cc: Dave Airlie <airlied@redhat.com>
-Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
----
- drivers/gpu/drm/udl/udl_fb.c  | 2 +-
- drivers/gpu/drm/udl/udl_gem.c | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c
-index 200419d4d43c..18a2acbccb7d 100644
---- a/drivers/gpu/drm/udl/udl_fb.c
-+++ b/drivers/gpu/drm/udl/udl_fb.c
-@@ -538,7 +538,7 @@ static int udlfb_create(struct drm_fb_helper *helper,
- out_destroy_fbi:
- 	drm_fb_helper_release_fbi(helper);
- out_gfree:
--	drm_gem_object_unreference(&ufbdev->ufb.obj->base);
-+	drm_gem_object_unreference_unlocked(&ufbdev->ufb.obj->base);
- out:
- 	return ret;
- }
-diff --git a/drivers/gpu/drm/udl/udl_gem.c b/drivers/gpu/drm/udl/udl_gem.c
-index 2a0a784ab6ee..d7528e0d8442 100644
---- a/drivers/gpu/drm/udl/udl_gem.c
-+++ b/drivers/gpu/drm/udl/udl_gem.c
-@@ -52,7 +52,7 @@ udl_gem_create(struct drm_file *file,
- 		return ret;
- 	}
- 
--	drm_gem_object_unreference(&obj->base);
-+	drm_gem_object_unreference_unlocked(&obj->base);
- 	*handle_p = handle;
- 	return 0;
- }

efi-Add-EFI_SECURE_BOOT-bit.patch

@@ -1,43 +0,0 @@
-From c01ff700ea4192ae04b306fef725d62189550236 Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Tue, 27 Aug 2013 13:33:03 -0400
-Subject: [PATCH 13/20] efi: Add EFI_SECURE_BOOT bit
-
-UEFI machines can be booted in Secure Boot mode.  Add a EFI_SECURE_BOOT bit
-for use with efi_enabled.
-
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- arch/x86/kernel/setup.c | 2 ++
- include/linux/efi.h     | 1 +
- 2 files changed, 3 insertions(+)
-
-diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
-index f3b804f..a401ff8 100644
---- a/arch/x86/kernel/setup.c
-+++ b/arch/x86/kernel/setup.c
-@@ -1145,7 +1145,9 @@ void __init setup_arch(char **cmdline_p)
- 
- #ifdef CONFIG_EFI_SECURE_BOOT_SIG_ENFORCE
- 	if (boot_params.secure_boot) {
-+		set_bit(EFI_SECURE_BOOT, &efi.flags);
- 		enforce_signed_modules();
-+		pr_info("Secure boot enabled\n");
- 	}
- #endif
- 
-diff --git a/include/linux/efi.h b/include/linux/efi.h
-index 569b5a8..4dc970e 100644
---- a/include/linux/efi.h
-+++ b/include/linux/efi.h
-@@ -980,6 +980,7 @@ extern int __init efi_setup_pcdp_console(char *);
- #define EFI_ARCH_1		7	/* First arch-specific bit */
- #define EFI_DBG			8	/* Print additional debug info at runtime */
- #define EFI_NX_PE_DATA		9	/* Can runtime data regions be mapped non-executable? */
-+#define EFI_SECURE_BOOT		10	/* Are we in Secure Boot mode? */
- 
- #ifdef CONFIG_EFI
- /*
--- 
-2.5.0
-

efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch

@@ -1,58 +0,0 @@
-From 9ef94251448aa463c5937ee8e8e27d6fd9529509 Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Tue, 5 Feb 2013 19:25:05 -0500
-Subject: [PATCH 11/20] efi: Disable secure boot if shim is in insecure mode
-
-A user can manually tell the shim boot loader to disable validation of
-images it loads.  When a user does this, it creates a UEFI variable called
-MokSBState that does not have the runtime attribute set.  Given that the
-user explicitly disabled validation, we can honor that and not enable
-secure boot mode if that variable is set.
-
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- arch/x86/boot/compressed/eboot.c | 20 +++++++++++++++++++-
- 1 file changed, 19 insertions(+), 1 deletion(-)
-
-diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
-index b4de3faa3f29..5cc2ef570390 100644
---- a/arch/x86/boot/compressed/eboot.c
-+++ b/arch/x86/boot/compressed/eboot.c
-@@ -830,8 +830,9 @@ out:
- 
- static int get_secure_boot(void)
- {
--	u8 sb, setup;
-+	u8 sb, setup, moksbstate;
- 	unsigned long datasize = sizeof(sb);
-+	u32 attr;
- 	efi_guid_t var_guid = EFI_GLOBAL_VARIABLE_GUID;
- 	efi_status_t status;
- 
-@@ -855,6 +856,23 @@ static int get_secure_boot(void)
- 	if (setup == 1)
- 		return 0;
- 
-+	/* See if a user has put shim into insecure_mode.  If so, and the variable
-+	 * doesn't have the runtime attribute set, we might as well honor that.
-+	 */
-+	var_guid = EFI_SHIM_LOCK_GUID;
-+	status = efi_early->call((unsigned long)sys_table->runtime->get_variable,
-+				L"MokSBState", &var_guid, &attr, &datasize,
-+				&moksbstate);
-+
-+	/* If it fails, we don't care why.  Default to secure */
-+	if (status != EFI_SUCCESS)
-+		return 1;
-+
-+	if (!(attr & EFI_VARIABLE_RUNTIME_ACCESS)) {
-+		if (moksbstate == 1)
-+			return 0;
-+	}
-+
- 	return 1;
- }
- 
--- 
-2.4.3
-

efi-Make-EFI_SECURE_BOOT_SIG_ENFORCE-depend-on-EFI.patch

@@ -1,30 +0,0 @@
-From 0081083434db41c15b72eced975da0bd9b80566b Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Tue, 27 Aug 2013 13:28:43 -0400
-Subject: [PATCH 12/20] efi: Make EFI_SECURE_BOOT_SIG_ENFORCE depend on EFI
-
-The functionality of the config option is dependent upon the platform being
-UEFI based.  Reflect this in the config deps.
-
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- arch/x86/Kconfig | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
-index 14db458f4774..f6ff0a86d841 100644
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -1735,7 +1735,8 @@ config EFI_MIXED
- 	   If unsure, say N.
- 
- config EFI_SECURE_BOOT_SIG_ENFORCE
--        def_bool n
-+	def_bool n
-+	depends on EFI
- 	prompt "Force module signing when UEFI Secure Boot is enabled"
- 	---help---
- 	  UEFI Secure Boot provides a mechanism for ensuring that the
--- 
-2.4.3
-

filter-aarch64.sh.fedora

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the aarch64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia power ssb soundwire staging tty uio uwb w1"
+
+ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
+
+drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel pl111 radeon rockchip tegra sun4i sun4i-drm-hdmi tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-aarch64.sh.rhel

@@ -9,8 +9,10 @@
 # modifications to the overrides below.  If something should be removed across
 # all arches, remove it in the default instead of per-arch.
 
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging uio uwb w1"
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
 
 ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target"
+drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel radeon rockchip tegra sun4i tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-armv7hl.sh.fedora

@@ -9,10 +9,10 @@
 # modifications to the overrides below.  If something should be removed across
 # all arches, remove it in the default instead of per-arch.
 
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn media memstick message mwave nfc ntb pcmcia platform ssb staging uio uwb w1"
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn media memstick message nfc ntb pcmcia ssb soundwire staging tty uio uwb w1"
 
 ethdrvs="3com adaptec alteon altera amd atheros broadcom cadence chelsio cisco dec dlink emulex icplus mellanox micrel myricom natsemi neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis sun tehuti via wiznet xircom"
 
-drmdrvs="amd armada bridge ast exynos i2c imx mgag200 msm omapdrm panel nouveau radeon rockchip tegra tilcdc via"
+drmdrvs="amd arm armada bridge ast exynos etnaviv hisilicon i2c imx meson mgag200 msm nouveau omapdrm panel pl111 radeon rockchip sti stm sun4i sun4i-drm-hdmi tegra tilcdc tinydrm vc4"
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls bq27xxx_battery_hdq mlx5_vdpa"

filter-i686.sh

@@ -1,14 +0,0 @@
-#! /bin/bash
-
-# This is the i686 override file for the core/drivers package split.  The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below.  If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick mfd mmc mtd mwave nfc ntb pcmcia platform power ssb staging uio uwb w1"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation target_core_user sbp_target"

filter-i686.sh.fedora

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the i686 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation hid-sensor-temperature hid-sensor-humidity target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus"

filter-modules.sh.fedora

@@ -0,0 +1,170 @@
+#! /bin/bash
+#
+# Called as filter-modules.sh list-of-modules Arch
+
+# This script filters the modules into the kernel-core and kernel-modules
+# subpackages.  We list out subsystems/subdirs to prune from the installed
+# module directory.  What is left is put into the kernel-core package.  What is
+# pruned is contained in the kernel-modules package.
+#
+# This file contains the default subsys/subdirs to prune from all architectures.
+# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
+# that contains the set of override lists to be used instead.  If a module or
+# subsys should be in kernel-modules on all arches, please change the defaults
+# listed here.
+
+# Overrides is individual modules which need to remain in kernel-core due to deps.
+overrides="cec"
+
+# Set the default dirs/modules to filter out
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
+
+chardrvs="mwave pcmcia"
+
+netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
+
+ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+
+inputdrvs="gameport tablet touchscreen"
+
+scsidrvs="aacraid advansys aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf wd719x"
+
+usbdrvs="atm image misc serial wusbcore"
+
+fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs jffs2 minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+
+drmdrvs="amd ast bridge gma500 i2c i915 mgag200 nouveau panel radeon"
+
+iiodrvs="accel adc afe common dac gyro health humidity light magnetometer multiplexer orientation potentiometer potentiostat pressure temperature"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus iTCO_wdt rnbd-client rnbd-server mlx5_vdpa"
+
+# Grab the arch-specific filter list overrides
+source ./filter-$2.sh
+
+filter_dir() {
+	filelist=$1
+	dir=$2
+
+	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${dir}.  Skipping."
+	else
+		grep -e "${dir}/" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+filter_ko() {
+	filelist=$1
+	mod=$2
+
+	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${mod}.ko  Skipping."
+	else
+		grep -e "${mod}.ko" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+# Filter the drivers/ subsystems
+for subsys in ${driverdirs}
+do
+	filter_dir $1 drivers/${subsys}
+done
+
+# Filter the networking drivers
+for netdrv in ${netdrvs}
+do
+	filter_dir $1 drivers/net/${netdrv}
+done
+
+# Filter the char drivers
+for char in ${chardrvs}
+do
+	filter_dir $1 drivers/char/${input}
+done
+
+# Filter the ethernet drivers
+for eth in ${ethdrvs}
+do
+	filter_dir $1 drivers/net/ethernet/${eth}
+done
+
+# SCSI
+for scsi in ${scsidrvs}
+do
+	filter_dir $1 drivers/scsi/${scsi}
+done
+
+# Input
+for input in ${inputdrvs}
+do
+	filter_dir $1 drivers/input/${input}
+done
+
+# USB
+for usb in ${usbdrvs}
+do
+	filter_dir $1 drivers/usb/${usb}
+done
+
+# Filesystems
+for fs in ${fsdrvs}
+do
+	filter_dir $1 fs/${fs}
+done
+
+# Network protocols
+for prot in ${netprots}
+do
+	filter_dir $1 kernel/net/${prot}
+done
+
+# DRM
+for drm in ${drmdrvs}
+do
+	filter_dir $1 drivers/gpu/drm/${drm}
+done
+
+# Just kill sound.
+filter_dir $1 kernel/sound
+
+# Now go through and filter any single .ko files that might have deps on the
+# things we filtered above
+for mod in ${singlemods}
+do
+        filter_ko $1 ${mod}
+done
+
+# Now process the override list to bring those modules back into core
+for mod in ${overrides}
+do
+	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
+	if [ $? -ne 0 ]
+        then
+                echo "Couldn't save ${mod}.ko  Skipping."
+        else
+                grep -e "/${mod}.ko" k-d.list >> $filelist
+                mv k-d.list.tmp k-d.list
+        fi
+
+done
+
+# Go through our generated drivers list and remove the .ko files.  We'll
+# restore them later.
+for mod in `cat k-d.list`
+do
+	rm -rf $mod
+done

filter-modules.sh.rhel

@@ -13,6 +13,9 @@
 # subsys should be in kernel-modules on all arches, please change the defaults
 # listed here.
 
+# Overrides is individual modules which need to remain in kernel-core due to deps.
+overrides="cec"
+
 # Set the default dirs/modules to filter out
 driverdirs="atm auxdisplay bcma bluetooth firewire fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
 
@@ -20,21 +23,21 @@ chardrvs="mwave pcmcia"
 
 netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
 
-ethdrvs="3com adaptec alteon amd atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
 
 inputdrvs="gameport tablet touchscreen"
 
-scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs"
+scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic hisi_sas isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf"
 
 usbdrvs="atm image misc serial wusbcore"
 
-fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs udf ufs"
+fsdrvs="affs befs coda cramfs ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
 
-netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp wireless"
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
 
 drmdrvs="amd ast gma500 i2c i915 mgag200 nouveau radeon via "
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial ism hid-asus"
 
 # Grab the arch-specific filter list overrides
 source ./filter-$2.sh
@@ -143,6 +146,20 @@ do
         filter_ko $1 ${mod}
 done
 
+# Now process the override list to bring those modules back into core
+for mod in ${overrides}
+do
+	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
+	if [ $? -ne 0 ]
+        then
+                echo "Couldn't save ${mod}.ko  Skipping."
+        else
+                grep -e "/${mod}.ko" k-d.list >> $filelist
+                mv k-d.list.tmp k-d.list
+        fi
+
+done
+
 # Go through our generated drivers list and remove the .ko files.  We'll
 # restore them later.
 for mod in `cat k-d.list`

filter-ppc64le.sh.fedora

@@ -1,6 +1,6 @@
 #! /bin/bash
 
-# This is the ppc64p7 override file for the core/drivers package split.  The
+# This is the ppc64le override file for the core/drivers package split.  The
 # module directories listed here and in the generic list in filter-modules.sh
 # will be moved to the resulting kernel-modules package for this arch.
 # Anything not listed in those files will be in the kernel-core package.
@@ -9,6 +9,6 @@
 # modifications to the overrides below.  If something should be removed across
 # all arches, remove it in the default instead of per-arch.
 
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging uio uwb w1"
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-ppc64le.sh.rhel

@@ -9,6 +9,6 @@
 # modifications to the overrides below.  If something should be removed across
 # all arches, remove it in the default instead of per-arch.
 
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging uio uwb w1"
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
 
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target"
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-s390x.sh.rhel

@@ -1,6 +1,6 @@
 #! /bin/bash
 
-# This is the ppc64 override file for the core/drivers package split.  The
+# This is the s390x override file for the core/drivers package split.  The
 # module directories listed here and in the generic list in filter-modules.sh
 # will be moved to the resulting kernel-modules package for this arch.
 # Anything not listed in those files will be in the kernel-core package.
@@ -9,6 +9,4 @@
 # modifications to the overrides below.  If something should be removed across
 # all arches, remove it in the default instead of per-arch.
 
-driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging uio uwb w1"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qla1280 9pnet_rdma rpcrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target"
+# Defaults work so no need to override

filter-x86_64.sh.rhel

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the x86_64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch

@@ -1,89 +0,0 @@
-From: Laura Abbott <labbott@fedoraproject.org>
-Date: Tue, 28 Apr 2015 15:37:44 -0700
-Subject: [PATCH] firmware: Drop WARN from usermodehelper_read_trylock error
- case
-
-We've received a number of reports of warnings when coming
-out of suspend with certain bluetooth firmware configurations:
-
-WARNING: CPU: 3 PID: 3280 at drivers/base/firmware_class.c:1126
-_request_firmware+0x558/0x810()
-Modules linked in: ccm ip6t_rpfilter ip6t_REJECT nf_reject_ipv6
-xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter
-ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
-ip6table_mangle ip6table_security ip6table_raw ip6table_filter
-ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
-nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw
-binfmt_misc bnep intel_rapl iosf_mbi arc4 x86_pkg_temp_thermal
-snd_hda_codec_hdmi coretemp kvm_intel joydev snd_hda_codec_realtek
-iwldvm snd_hda_codec_generic kvm iTCO_wdt mac80211 iTCO_vendor_support
-snd_hda_intel snd_hda_controller snd_hda_codec crct10dif_pclmul
-snd_hwdep crc32_pclmul snd_seq crc32c_intel ghash_clmulni_intel uvcvideo
-snd_seq_device iwlwifi btusb videobuf2_vmalloc snd_pcm videobuf2_core
- serio_raw bluetooth cfg80211 videobuf2_memops sdhci_pci v4l2_common
-videodev thinkpad_acpi sdhci i2c_i801 lpc_ich mfd_core wacom mmc_core
-media snd_timer tpm_tis hid_logitech_hidpp wmi tpm rfkill snd mei_me mei
-shpchp soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915
-i2c_algo_bit drm_kms_helper e1000e drm hid_logitech_dj ptp pps_core
-video
-CPU: 3 PID: 3280 Comm: kworker/u17:0 Not tainted 3.19.3-200.fc21.x86_64
-Hardware name: LENOVO 343522U/343522U, BIOS GCET96WW (2.56 ) 10/22/2013
-Workqueue: hci0 hci_power_on [bluetooth]
- 0000000000000000 0000000089944328 ffff88040acffb78 ffffffff8176e215
- 0000000000000000 0000000000000000 ffff88040acffbb8 ffffffff8109bc1a
- 0000000000000000 ffff88040acffcd0 00000000fffffff5 ffff8804076bac40
-Call Trace:
- [<ffffffff8176e215>] dump_stack+0x45/0x57
- [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
- [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
- [<ffffffff814dbe78>] _request_firmware+0x558/0x810
- [<ffffffff814dc165>] request_firmware+0x35/0x50
- [<ffffffffa03a7886>] btusb_setup_bcm_patchram+0x86/0x590 [btusb]
- [<ffffffff814d40e6>] ? rpm_idle+0xd6/0x230
- [<ffffffffa04d4801>] hci_dev_do_open+0xe1/0xa90 [bluetooth]
- [<ffffffff810c51dd>] ? ttwu_do_activate.constprop.90+0x5d/0x70
- [<ffffffffa04d5980>] hci_power_on+0x40/0x200 [bluetooth]
- [<ffffffff810b487c>] process_one_work+0x14c/0x3f0
- [<ffffffff810b52f3>] worker_thread+0x53/0x470
- [<ffffffff810b52a0>] ? rescuer_thread+0x300/0x300
- [<ffffffff810ba548>] kthread+0xd8/0xf0
- [<ffffffff810ba470>] ? kthread_create_on_node+0x1b0/0x1b0
- [<ffffffff81774958>] ret_from_fork+0x58/0x90
- [<ffffffff810ba470>] ? kthread_create_on_node+0x1b0/0x1b0
-
-This occurs after every resume.
-
-When resuming, the bluetooth driver needs to re-request the
-firmware. This re-request is happening before usermodehelper
-is fully enabled. If the firmware load succeeded previously, the
-caching behavior of the firmware code typically negates the
-need to call the usermodehelper code again and the request
-succeeds. If the firmware was never loaded because it isn't
-actually present in the file system, this results in a call
-to usermodehelper and a failure warning every resume.
-
-The proper fix is to add a reset_resume functionality to the
-btusb driver to be able to handle the resume case. The
-work for this is ongoing so in the mean time just silence
-the warning since we know it's a problem.
-
-Bugzilla: 1133378
-Upstream-status: Working on it. It's a difficult problem :(
-Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
----
- drivers/base/firmware_class.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
-index 894bda114224..f7a8d27b6459 100644
---- a/drivers/base/firmware_class.c
-+++ b/drivers/base/firmware_class.c
-@@ -1144,7 +1144,7 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
- 		}
- 	} else {
- 		ret = usermodehelper_read_trylock();
--		if (WARN_ON(ret)) {
-+		if (ret) {
- 			dev_err(device, "firmware: %s will not be loaded\n",
- 				name);
- 			goto out;

generate_all_configs.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+# Adjusts the configuration options to build the variants correctly
+#
+# arg1: configuration to go in the primary variant
+# arg2: are we only generating debug configs
+
+
+PRIMARY=$1
+DEBUGBUILDSENABLED=$2
+
+if [ -z "$2" ]; then
+	exit 1
+fi
+
+if [ -z "$PRIMARY" ]; then
+	PRIMARY=rhel
+fi
+
+if [ "$PRIMARY" = "fedora" ]; then
+	SECONDARY=rhel
+else
+	SECONDARY=fedora
+fi
+
+for i in kernel-*-"$PRIMARY".config; do
+	NEW=kernel-"$VERSION"-$(echo "$i" | cut -d - -f2- | sed s/-"$PRIMARY"//)
+	#echo $NEW
+	mv "$i" "$NEW"
+done
+
+rm -f kernel-*-"$SECONDARY".config
+
+if [ "$DEBUGBUILDSENABLED" -eq 0 ]; then
+	for i in kernel-*debug*.config; do
+		base=$(echo "$i" | sed -r s/-?debug//g)
+		NEW=kernel-$(echo "$base" | cut -d - -f2-)
+		mv "$i" "$NEW"
+	done
+fi

generate_bls_conf.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+set -e
+
+# shellcheck disable=SC1091
+. /etc/os-release
+
+kernelver=$1 && shift
+rootfs=$1 && shift
+variant=$1 && shift
+
+output="${rootfs}/lib/modules/${kernelver}/bls.conf"
+date=$(date -u +%Y%m%d%H%M%S)
+
+if [ "${variant:-5}" = "debug" ]; then
+    debugname=" with debugging"
+    debugid="-debug"
+else
+    debugname=""
+    debugid=""
+fi
+
+# shellcheck will complain about bootprefix being referenced but not assigned,
+# but that is perfectly OK here.
+# shellcheck disable=SC2154
+cat > "$output" <<EOF
+title ${NAME} (${kernelver}) ${VERSION}${debugname}
+version ${kernelver}${debugid}
+linux ${bootprefix}/vmlinuz-${kernelver}
+initrd ${bootprefix}/initramfs-${kernelver}.img
+options \$kernelopts
+id ${ID}-${date}-${kernelver}${debugid}
+grub_users \$grub_users
+grub_arg --unrestricted
+grub_class kernel${variant}
+EOF

gitrev

@@ -1 +0,0 @@
-81f70ba233d5f660e1ea5fe23260ee323af5d53a

hibernate-Disable-in-a-signed-modules-environment.patch

@@ -1,39 +0,0 @@
-From 51abecb00c48941cc3db19701cc73e65082924bb Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Fri, 20 Jun 2014 08:53:24 -0400
-Subject: [PATCH 14/20] hibernate: Disable in a signed modules environment
-
-There is currently no way to verify the resume image when returning
-from hibernate.  This might compromise the signed modules trust model,
-so until we can work with signed hibernate images we disable it in
-a secure modules environment.
-
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- kernel/power/hibernate.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
-index 690f78f210f2..037303a1cba9 100644
---- a/kernel/power/hibernate.c
-+++ b/kernel/power/hibernate.c
-@@ -29,6 +29,7 @@
- #include <linux/ctype.h>
- #include <linux/genhd.h>
- #include <linux/ktime.h>
-+#include <linux/module.h>
- #include <trace/events/power.h>
- 
- #include "power.h"
-@@ -66,7 +67,7 @@ static const struct platform_hibernation_ops *hibernation_ops;
- 
- bool hibernation_available(void)
- {
--	return (nohibernate == 0);
-+	return ((nohibernate == 0) && !secure_modules());
- }
- 
- /**
--- 
-2.4.3
-

ideapad-laptop-Add-Lenovo-ideapad-Y700-17ISK-to-no_h.patch

@@ -1,40 +0,0 @@
-From 14b627c610f93c2700f9a3825ac10c35d51acfe4 Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@fedoraproject.org>
-Date: Mon, 7 Dec 2015 13:50:38 -0500
-Subject: [PATCH] ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill
- dmi list
-
-One of the newest ideapad models also lacks a physical hw rfkill switch,
-and trying to read the hw rfkill switch through the ideapad module
-causes it to always reported blocking breaking wifi.
-
-Fix it by adding this model to the DMI list.
-
-BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1286293
-Cc: stable@vger.kernel.org
-Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
----
- drivers/platform/x86/ideapad-laptop.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
-index a313dfc0245f..d28db0e793df 100644
---- a/drivers/platform/x86/ideapad-laptop.c
-+++ b/drivers/platform/x86/ideapad-laptop.c
-@@ -865,6 +865,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = {
- 		},
- 	},
- 	{
-+		.ident = "Lenovo ideapad Y700-17ISK",
-+		.matches = {
-+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-17ISK"),
-+		},
-+	},
-+	{
- 		.ident = "Lenovo Yoga 2 11 / 13 / Pro",
- 		.matches = {
- 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
--- 
-2.5.0
-

input-kill-stupid-messages.patch

@@ -1,30 +0,0 @@
-From: "kernel-team@fedoraproject.org" <kernel-team@fedoraproject.org>
-Date: Thu, 29 Jul 2010 16:46:31 -0700
-Subject: [PATCH] input: kill stupid messages
-
-Bugzilla: N/A
-Upstream-status: Fedora mustard
----
- drivers/input/keyboard/atkbd.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
-index ec876b5b1382..9d5216e23a09 100644
---- a/drivers/input/keyboard/atkbd.c
-+++ b/drivers/input/keyboard/atkbd.c
-@@ -436,11 +436,15 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
- 		goto out;
- 	case ATKBD_RET_ACK:
- 	case ATKBD_RET_NAK:
-+# if 0
-+		/* Quite a few key switchers and other tools trigger this
-+		 * and it confuses people who can do nothing about it */
- 		if (printk_ratelimit())
- 			dev_warn(&serio->dev,
- 				 "Spurious %s on %s. "
- 				 "Some program might be trying to access hardware directly.\n",
- 				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
-+#endif
- 		goto out;
- 	case ATKBD_RET_ERR:
- 		atkbd->err_count++;

kbuild-AFTER_LINK.patch

@@ -1,126 +0,0 @@
-From a9488dbeccf188f0bd83b9d5704892f2c0f97fdc Mon Sep 17 00:00:00 2001
-From: Roland McGrath <roland@redhat.com>
-Date: Mon, 6 Oct 2008 23:03:03 -0700
-Subject: [PATCH] kbuild: AFTER_LINK
-
-If the make variable AFTER_LINK is set, it is a command line to run
-after each final link.  This includes vmlinux itself and vDSO images.
-
-Bugzilla: N/A
-Upstream-status: ??
-
-Signed-off-by: Roland McGrath <roland@redhat.com>
----
- arch/arm64/kernel/vdso/Makefile     | 3 ++-
- arch/powerpc/kernel/vdso32/Makefile | 3 ++-
- arch/powerpc/kernel/vdso64/Makefile | 3 ++-
- arch/s390/kernel/vdso32/Makefile    | 3 ++-
- arch/s390/kernel/vdso64/Makefile    | 3 ++-
- arch/x86/entry/vdso/Makefile        | 5 +++--
- scripts/link-vmlinux.sh             | 4 ++++
- 7 files changed, 17 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
-index b467fd0..feeff5e 100644
---- a/arch/arm64/kernel/vdso/Makefile
-+++ b/arch/arm64/kernel/vdso/Makefile
-@@ -55,7 +55,8 @@ $(obj-vdso): %.o: %.S FORCE
- 
- # Actual build commands
- quiet_cmd_vdsold = VDSOL   $@
--      cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $^ -o $@
-+      cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $^ -o $@ \
-+				    $(if $(AFTER_LINK),;$(AFTER_LINK))
- quiet_cmd_vdsoas = VDSOA   $@
-       cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $<
- 
-diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
-index 6abffb7..7b103bb 100644
---- a/arch/powerpc/kernel/vdso32/Makefile
-+++ b/arch/powerpc/kernel/vdso32/Makefile
-@@ -43,7 +43,8 @@ $(obj-vdso32): %.o: %.S
- 
- # actual build commands
- quiet_cmd_vdso32ld = VDSO32L $@
--      cmd_vdso32ld = $(CROSS32CC) $(c_flags) -Wl,-T $^ -o $@
-+      cmd_vdso32ld = $(CROSS32CC) $(c_flags) -Wl,-T $^ -o $@ \
-+		     $(if $(AFTER_LINK),; $(AFTER_LINK))
- quiet_cmd_vdso32as = VDSO32A $@
-       cmd_vdso32as = $(CROSS32CC) $(a_flags) -c -o $@ $<
- 
-diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
-index 8c8f2ae..a743ebe 100644
---- a/arch/powerpc/kernel/vdso64/Makefile
-+++ b/arch/powerpc/kernel/vdso64/Makefile
-@@ -36,7 +36,8 @@ $(obj-vdso64): %.o: %.S
- 
- # actual build commands
- quiet_cmd_vdso64ld = VDSO64L $@
--      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
-+      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@ \
-+		     $(if $(AFTER_LINK),; $(AFTER_LINK))
- quiet_cmd_vdso64as = VDSO64A $@
-       cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
- 
-diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
-index ee8a18e..63e33fa 100644
---- a/arch/s390/kernel/vdso32/Makefile
-+++ b/arch/s390/kernel/vdso32/Makefile
-@@ -43,7 +43,8 @@ $(obj-vdso32): %.o: %.S
- 
- # actual build commands
- quiet_cmd_vdso32ld = VDSO32L $@
--      cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
-+      cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $^ -o $@ \
-+		     $(if $(AFTER_LINK),; $(AFTER_LINK))
- quiet_cmd_vdso32as = VDSO32A $@
-       cmd_vdso32as = $(CC) $(a_flags) -c -o $@ $<
- 
-diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
-index c4b03f9..550450f 100644
---- a/arch/s390/kernel/vdso64/Makefile
-+++ b/arch/s390/kernel/vdso64/Makefile
-@@ -43,7 +43,8 @@ $(obj-vdso64): %.o: %.S
- 
- # actual build commands
- quiet_cmd_vdso64ld = VDSO64L $@
--      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
-+      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@ \
-+		     $(if $(AFTER_LINK),; $(AFTER_LINK))
- quiet_cmd_vdso64as = VDSO64A $@
-       cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
- 
-diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
-index 265c0ed..fd90c7d 100644
---- a/arch/x86/entry/vdso/Makefile
-+++ b/arch/x86/entry/vdso/Makefile
-@@ -159,8 +159,9 @@ $(obj)/vdso32.so.dbg: FORCE \
- quiet_cmd_vdso = VDSO    $@
-       cmd_vdso = $(CC) -nostdlib -o $@ \
- 		       $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \
--		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
--		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
-+		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) \
-+		$(if $(AFTER_LINK),; $(AFTER_LINK)) && \
-+		sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
- 
- VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=both) \
- 	$(call cc-ldoption, -Wl$(comma)--build-id) -Wl,-Bsymbolic $(LTO_CFLAGS)
-diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
-index dacf71a..72cbefd 100755
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -65,6 +65,10 @@ vmlinux_link()
- 			-lutil -lrt -lpthread ${1}
- 		rm -f linux
- 	fi
-+	if [ -n "${AFTER_LINK}" ]; then
-+		/usr/lib/rpm/debugedit -b ${RPM_BUILD_DIR} -d /usr/src/debug -i ${2} \
-+			> ${2}.id
-+	fi
- }
- 
- 
--- 
-2.5.0
-