kernel-5.11.0-0.rc3.122

* Mon Jan 11 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.11.0-0.rc3.122]
- irq: export irq_check_status_bit (Levi Yun)
- Turn off vdso_install for ppc ("Justin M. Forbes")
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>

.gitignore

@@ -0,0 +1,2 @@
+*.xz
+*.bz2

Makefile.rhelver

@@ -0,0 +1,45 @@
+RHEL_MAJOR = 8
+RHEL_MINOR = 99
+
+#
+# RHEL_RELEASE
+# -------------
+#
+# Represents build number in 'release' part of RPM's name-version-release.
+#   name is <package_name>, e.g. kernel
+#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
+#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+RHEL_RELEASE = 122
+
+#
+# Early y+1 numbering
+# --------------------
+#
+# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
+# First is RHEL_RELEASE inherited/merged from y as-is, second number
+# is incremented with each build starting from 1. After merge from y,
+# it resets back to 1. This way y+1 nvr reflects status of last merge.
+#
+# Example:
+#
+# rhel8.0                        rhel-8.1
+#   kernel-4.18.0-58.el8   -->     kernel-4.18.0-58.1.el8
+#                                  kernel-4.18.0-58.2.el8
+#   kernel-4.18.0-59.el8           kernel-4.18.0-59.1.el8
+#   kernel-4.18.0-60.el8
+#   kernel-4.18.0-61.el8   -->     kernel-4.18.0-61.1.el8
+#
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+EARLY_YSTREAM ?= no
+EARLY_YBUILD:=
+EARLY_YRELEASE:=
+ifneq ("$(ZSTREAM)", "yes")
+  ifeq ("$(EARLY_YSTREAM)","yes")
+    RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
+  endif
+endif

Patchlist.changelog

@@ -0,0 +1,228 @@
+https://gitlab.com/cki-project/kernel-ark/-/commit/8773e8c6039ff74d1426cc80de30de759cd0c2a2
+ 8773e8c6039ff74d1426cc80de30de759cd0c2a2 irq: export irq_check_status_bit
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e187313e5f0086538fefe0925ef84480f99616d8
+ e187313e5f0086538fefe0925ef84480f99616d8 gcc-plugins: fix gcc 11 indigestion with plugins...
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc
+ 0c84b348e33ab9d7df5c3c5acc7fbc07fd96fafc Fix up bad merge with efi: generalize efi_get_secureboot
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/364788093bdf437c33753d327136c363be8f756c
+ 364788093bdf437c33753d327136c363be8f756c Fix up a merge issue with rxe.c
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/a4d554ce883e24df77cce42bc2deec527028c213
+ a4d554ce883e24df77cce42bc2deec527028c213 Filter out LTO build options from the perl ccopts
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/17b0f7f1d49df30661b517d668715ff5ee1bab09
+ 17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e7c009cd91ababdbb5f726ef592c7800f0682d3a
+ e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7120b2a26fc4c7954fd0395973dc6739c110e091
+ 7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7a28e2fde653a161913abb8eee943cdacb5ff2ae
+ 7a28e2fde653a161913abb8eee943cdacb5ff2ae x86: Fix compile issues with rh_check_supported()
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/45f64c1a24e73af7987cffec3ea941e29364f87f
+ 45f64c1a24e73af7987cffec3ea941e29364f87f e1000e: bump up timeout to wait when ME un-configure ULP mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6c14763b1ce98698949ff45135c15e333aa6416d
+ 6c14763b1ce98698949ff45135c15e333aa6416d drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/67a19b16012b12cffba0b515c6503e5f8cdbb798
+ 67a19b16012b12cffba0b515c6503e5f8cdbb798 drm: panel: add Xingbangda XBD599 panel
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/d220dbf98cef820367b5a2a2eeaacebee958bdd4
+ d220dbf98cef820367b5a2a2eeaacebee958bdd4 dt-bindings: panel: add binding for Xingbangda XBD599 panel
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/80660062260dec4bdca9540922577542c16145e8
+ 80660062260dec4bdca9540922577542c16145e8 ARM: fix __get_user_check() in case uaccess_* calls are not inlined
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/24d8743613b2a6a585fc68cfe95078d9a3d5b389
+ 24d8743613b2a6a585fc68cfe95078d9a3d5b389 mm/kmemleak: skip late_init if not skip disable
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/b697ff5e26974fee8fcd31a1e221e9dd41515efc
+ b697ff5e26974fee8fcd31a1e221e9dd41515efc KEYS: Make use of platform keyring for module signature verify
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/081d2185e22479b449586c4e9843602ca0d49806
+ 081d2185e22479b449586c4e9843602ca0d49806 Drop that for now
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5ef51389cf6673a0e9e004909c7be1dc785050b2
+ 5ef51389cf6673a0e9e004909c7be1dc785050b2 Input: rmi4 - remove the need for artificial IRQ in case of HID
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/c1788012ebf8de46e9dc80d18051ed0c77c811b6
+ c1788012ebf8de46e9dc80d18051ed0c77c811b6 ARM: tegra: usb no reset
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/577365feaa909db4c0949eabfcda7e4a972b8e54
+ 577365feaa909db4c0949eabfcda7e4a972b8e54 arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/331be9c5a436057ee852075c102d9d90a9046a30
+ 331be9c5a436057ee852075c102d9d90a9046a30 redhat: rh_kabi: deduplication friendly structs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/34d79fbfb327f732ebf3ece4db21a14f81fedf03
+ 34d79fbfb327f732ebf3ece4db21a14f81fedf03 redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07
+ 93a4b5f12d5a1c2d62cf1d7c440b31d9847eab07 redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/8e5c06356457f5351289e9f687b991189d163dae
+ 8e5c06356457f5351289e9f687b991189d163dae redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/212cbccda77cc81fcb60123907eabdac8ad5adb7
+ 212cbccda77cc81fcb60123907eabdac8ad5adb7 redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6f7744b412e1fb86a67d8761e64df69cf891b4ad
+ 6f7744b412e1fb86a67d8761e64df69cf891b4ad redhat: rh_kabi: Add macros to size and extend structs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/049623d33998be30d79692c69b34acb502c496e3
+ 049623d33998be30d79692c69b34acb502c496e3 Removing Obsolete hba pci-ids from rhel8
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/43ef1d631ecfe84084db3572c9ed1bedbdceb0f8
+ 43ef1d631ecfe84084db3572c9ed1bedbdceb0f8 mptsas: pci-id table changes
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e5726695109dd1a73da92487b75de6a51d54c015
+ e5726695109dd1a73da92487b75de6a51d54c015 mptsas: Taint kernel if mptsas is loaded
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16
+ ee4dcd6f04ca76ad35ab0f38c436ab2f7de53f16 mptspi: pci-id table changes
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/bd305f716d8b64be1926bc7aebe02468ac6bf599
+ bd305f716d8b64be1926bc7aebe02468ac6bf599 qla2xxx: Remove PCI IDs of deprecated adapter
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/803ff9a2c660c094e14d246ef05019bf6008d503
+ 803ff9a2c660c094e14d246ef05019bf6008d503 be2iscsi: remove unsupported device IDs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2cb24399321f555f18b0804d3fe02cf53949fba1
+ 2cb24399321f555f18b0804d3fe02cf53949fba1 mptspi: Taint kernel if mptspi is loaded
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ad1740551ff4af49f1ef10a130783d9369e955a0
+ ad1740551ff4af49f1ef10a130783d9369e955a0 hpsa: remove old cciss-based smartarray pci ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/4197ba3e766656eea9175c11ed05903620d98a28
+ 4197ba3e766656eea9175c11ed05903620d98a28 qla4xxx: Remove deprecated PCI IDs from RHEL 8
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7e285aec22ab1213639afda877902db363473cb0
+ 7e285aec22ab1213639afda877902db363473cb0 aacraid: Remove depreciated device and vendor PCI id's
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/846109a16be92155e69731c36dde48761d375153
+ 846109a16be92155e69731c36dde48761d375153 megaraid_sas: remove deprecated pci-ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6fd2019d01cee7ff36dc047d3ecdb504b968f222
+ 6fd2019d01cee7ff36dc047d3ecdb504b968f222 mpt*: remove certain deprecated pci-ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/dddcd5c1129b275ff160324036a662739db51fc3
+ dddcd5c1129b275ff160324036a662739db51fc3 kernel: add SUPPORT_REMOVED kernel taint
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/08d77161dba915d1ed0d9fede658085440ab4474
+ 08d77161dba915d1ed0d9fede658085440ab4474 Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e2dc2ca6a25a445bf22ceb6a8e38e02706605341
+ e2dc2ca6a25a445bf22ceb6a8e38e02706605341 Add option of 13 for FORCE_MAX_ZONEORDER
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2384646bf71d8c282cf49bb20321fdf802c61cce
+ 2384646bf71d8c282cf49bb20321fdf802c61cce s390: Lock down the kernel when the IPL secure flag is set
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5850c93175b9d2e1081873f4bbe08dead202cb08
+ 5850c93175b9d2e1081873f4bbe08dead202cb08 efi: Lock down the kernel if booted in secure boot mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/53250b991f841be025fa4d264850dadc0fae2861
+ 53250b991f841be025fa4d264850dadc0fae2861 efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/72223fd1241cc5c70b96a491db14d54c83beadd8
+ 72223fd1241cc5c70b96a491db14d54c83beadd8 security: lockdown: expose a hook to lock the kernel down
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7ba28f03674fa9346610c3fea7fc93bc58f06d2a
+ 7ba28f03674fa9346610c3fea7fc93bc58f06d2a Make get_cert_list() use efi_status_to_str() to print error messages.
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2ae9082db0b54d831a9b3782c049d9917e37d89f
+ 2ae9082db0b54d831a9b3782c049d9917e37d89f Add efi_status_to_str() and rework efi_status_to_err().
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cee1461ada1b7e4b92cd154e7ec241119afcd644
+ cee1461ada1b7e4b92cd154e7ec241119afcd644 Add support for deprecating processors
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2420149f8f5fa9dd1e2dc793765b498022922a81
+ 2420149f8f5fa9dd1e2dc793765b498022922a81 arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/1d69b30b98b60aff639351f5788d20a3b17f6e27
+ 1d69b30b98b60aff639351f5788d20a3b17f6e27 iommu/arm-smmu: workaround DMA mode issues
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/6b2e73e508e7a117b1db91596097c00e5570f64a
+ 6b2e73e508e7a117b1db91596097c00e5570f64a rh_kabi: introduce RH_KABI_EXCLUDE
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ecb9206bce179eb600c52642a6753012a69ce4a2
+ ecb9206bce179eb600c52642a6753012a69ce4a2 ipmi: do not configure ipmi for HPE m400
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/473be59fe72afa9969cf8d10609ef3f14f594631
+ 473be59fe72afa9969cf8d10609ef3f14f594631 IB/rxe: Mark Soft-RoCE Transport driver as tech-preview
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/b94117795261f9c074a7addca2252238871b5081
+ b94117795261f9c074a7addca2252238871b5081 scsi: smartpqi: add inspur advantech ids
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cae871558c333880c1687cab6f2a71accf40d105
+ cae871558c333880c1687cab6f2a71accf40d105 ice: mark driver as tech-preview
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7d9cb007404211ea6638bde4a28dd0fbe8d95de0
+ 7d9cb007404211ea6638bde4a28dd0fbe8d95de0 kABI: Add generic kABI macros to use for kABI workarounds
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/bd353e9aae8877dd490e6c92b67849e0dcfbab25
+ bd353e9aae8877dd490e6c92b67849e0dcfbab25 add pci_hw_vendor_status()
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/41a259999969bbdfe9f556ce71f2c3c07d7454f4
+ 41a259999969bbdfe9f556ce71f2c3c07d7454f4 ahci: thunderx2: Fix for errata that affects stop engine
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2a107343529ce648c11bff62e9f72bbeec738f3f
+ 2a107343529ce648c11bff62e9f72bbeec738f3f Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/03e48a48f400a51a182a1254cf22ff0c08706d76
+ 03e48a48f400a51a182a1254cf22ff0c08706d76 bpf: Add tech preview taint for syscall
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/607f0e89af7ef5682f79f2eea0a99638a1bc0c4f
+ 607f0e89af7ef5682f79f2eea0a99638a1bc0c4f bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/31da227877eb734ddb484bc519aae85ce200802e
+ 31da227877eb734ddb484bc519aae85ce200802e add Red Hat-specific taint flags
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/7a2e2c83be0230667756cccb5bc3687419dfbb8b
+ 7a2e2c83be0230667756cccb5bc3687419dfbb8b kdump: fix a grammar issue in a kernel message
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/d345d54d33e7d496c9d845e4723550dd37cb3f88
+ d345d54d33e7d496c9d845e4723550dd37cb3f88 tags.sh: Ignore redhat/rpm
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0
+ 5c67dc1eb0783a5c4ca4eb5c545ff6fe05facff0 put RHEL info into generated headers
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/ce12884c009ec3bed11100c9d19f6d97628cf8ae
+ ce12884c009ec3bed11100c9d19f6d97628cf8ae kdump: add support for crashkernel=auto
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/18fb1389afccdc5535977a10669b49a37829b55a
+ 18fb1389afccdc5535977a10669b49a37829b55a kdump: round up the total memory size to 128M for crashkernel reservation
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/5fb9821441cc0b77101ad9c0dfaa747957a4cce4
+ 5fb9821441cc0b77101ad9c0dfaa747957a4cce4 acpi: prefer booting with ACPI over DTS
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/0cf21a40db6fca5d89cf3d65808117c8c14e524e
+ 0cf21a40db6fca5d89cf3d65808117c8c14e524e aarch64: acpi scan: Fix regression related to X-Gene UARTs
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/de13e14cc2388478d9a2c68c5d90affd92098f11
+ de13e14cc2388478d9a2c68c5d90affd92098f11 ACPI / irq: Workaround firmware issue on X-Gene based m400
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/71c098f4afa38a15a95495c14f71fb087ab27308
+ 71c098f4afa38a15a95495c14f71fb087ab27308 modules: add rhelversion MODULE_INFO tag
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/3247f9c838f4aa91aa5d08c152b385d61554d4b5
+ 3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/e80982feaa68226ff60d2f83dace2016c35270d3
+ e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/2987f9a606df106f5bdfa4113eb55356a21085a6
+ 2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/a99885a5e77af594dfdce586cc83e5911d8401ce
+ a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile
+
+https://gitlab.com/cki-project/kernel-ark/-/commit/cd3a5d30570279538623ea8a1255db0ee4b728f7
+ cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile
+

README.rst

@@ -0,0 +1,25 @@
+===================
+The Kernel dist-git
+===================
+
+The kernel is maintained in a `source tree`_ rather than directly in dist-git.
+The specfile is maintained as a `template`_ in the source tree along with a set
+of build scripts to generate configurations, (S)RPMs, and to populate the
+dist-git repository.
+
+The `documentation`_ for the source tree covers how to contribute and maintain
+the tree.
+
+If you're looking for the downstream patch set it's available in the source
+tree with "git log master..ark-patches" or
+`online`_.
+
+Each release in dist-git is tagged in the source repository so you can easily
+check out the source tree for a build. The tags are in the format
+name-version-release, but note release doesn't contain the dist tag since the
+source can be built in different build roots (Fedora, CentOS, etc.)
+
+.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
+.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
+.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
+.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

check-kabi

@@ -0,0 +1,149 @@
+#!/usr/bin/python3
+#
+# check-kabi - Red Hat kABI reference checking tool
+#
+# We use this script to check against reference Module.kabi files.
+#
+# Author: Jon Masters <jcm@redhat.com>
+# Copyright (C) 2007-2009 Red Hat, Inc.
+#
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPL).
+
+# Changelog:
+#
+# 2018/06/01 - Update for python3 by Petr Oros.
+# 2009/08/15 - Updated for use in RHEL6.
+# 2007/06/13 - Initial rewrite in python by Jon Masters.
+
+__author__ = "Jon Masters <jcm@redhat.com>"
+__version__ = "2.0"
+__date__ = "2009/08/15"
+__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
+__license__ = "GPL"
+
+import getopt
+import string
+import sys
+
+true = 1
+false = 0
+
+
+def load_symvers(symvers, filename):
+    """Load a Module.symvers file."""
+
+    symvers_file = open(filename, "r")
+
+    while true:
+        in_line = symvers_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type = in_line.split()
+
+        symvers[symbol] = in_line[0:-1]
+
+
+def load_kabi(kabi, filename):
+    """Load a Module.kabi file."""
+
+    kabi_file = open(filename, "r")
+
+    while true:
+        in_line = kabi_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type = in_line.split()
+
+        kabi[symbol] = in_line[0:-1]
+
+
+def check_kabi(symvers, kabi):
+    """Check Module.kabi and Module.symvers files."""
+
+    fail = 0
+    warn = 0
+    changed_symbols = []
+    moved_symbols = []
+
+    for symbol in kabi:
+        abi_hash, abi_sym, abi_dir, abi_type = kabi[symbol].split()
+        if symbol in symvers:
+            sym_hash, sym_sym, sym_dir, sym_type = symvers[symbol].split()
+            if abi_hash != sym_hash:
+                fail = 1
+                changed_symbols.append(symbol)
+
+            if abi_dir != sym_dir:
+                warn = 1
+                moved_symbols.append(symbol)
+        else:
+            fail = 1
+            changed_symbols.append(symbol)
+
+    if fail:
+        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
+        print("")
+        print("The following symbols have been changed (this will cause an ABI breakage):")
+        print("")
+        for symbol in changed_symbols:
+            print(symbol)
+        print("")
+
+    if warn:
+        print("*** WARNING - ABI SYMBOLS MOVED ***")
+        print("")
+        print("The following symbols moved (typically caused by moving a symbol from being")
+        print("provided by the kernel vmlinux out to a loadable module):")
+        print("")
+        for symbol in moved_symbols:
+            print(symbol)
+        print("")
+
+    """Halt the build, if we got errors and/or warnings. In either case,
+       double-checkig is required to avoid introducing / concealing
+       KABI inconsistencies."""
+    if fail or warn:
+        sys.exit(1)
+    sys.exit(0)
+
+
+def usage():
+    print("""
+check-kabi: check Module.kabi and Module.symvers files.
+
+    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
+
+""")
+
+
+if __name__ == "__main__":
+
+    symvers_file = ""
+    kabi_file = ""
+
+    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
+
+    for o, v in opts:
+        if o == "-s":
+            symvers_file = v
+        if o == "-h":
+            usage()
+            sys.exit(0)
+        if o == "-k":
+            kabi_file = v
+
+    if (symvers_file == "") or (kabi_file == ""):
+        usage()
+        sys.exit(1)
+
+    symvers = {}
+    kabi = {}
+
+    load_symvers(symvers, symvers_file)
+    load_kabi(kabi, kabi_file)
+    check_kabi(symvers, kabi)

cpupower.config

@@ -0,0 +1,3 @@
+# See 'cpupower help' and cpupower(1) for more info
+CPUPOWER_START_OPTS="frequency-set -g performance"
+CPUPOWER_STOP_OPTS="frequency-set -g ondemand"

cpupower.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=Configure CPU power related settings
+After=syslog.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=/etc/sysconfig/cpupower
+ExecStart=/usr/bin/cpupower $CPUPOWER_START_OPTS
+ExecStop=/usr/bin/cpupower $CPUPOWER_STOP_OPTS
+
+[Install]
+WantedBy=multi-user.target

filter-aarch64.sh.fedora

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the aarch64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia power ssb soundwire staging tty uio uwb w1"
+
+ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
+
+drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel pl111 radeon rockchip tegra sun4i sun4i-drm-hdmi tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-aarch64.sh.rhel

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the aarch64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
+
+drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel radeon rockchip tegra sun4i tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-armv7hl.sh.fedora

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the armv7hl override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn media memstick message nfc ntb pcmcia ssb soundwire staging tty uio uwb w1"
+
+ethdrvs="3com adaptec alteon altera amd atheros broadcom cadence chelsio cisco dec dlink emulex icplus mellanox micrel myricom natsemi neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis sun tehuti via wiznet xircom"
+
+drmdrvs="amd arm armada bridge ast exynos etnaviv hisilicon i2c imx meson mgag200 msm nouveau omapdrm panel pl111 radeon rockchip sti stm sun4i sun4i-drm-hdmi tegra tilcdc tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls bq27xxx_battery_hdq mlx5_vdpa"

filter-i686.sh.fedora

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the i686 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub hid-sensor-magn-3d hid-sensor-incl-3d hid-sensor-gyro-3d hid-sensor-iio-common hid-sensor-accel-3d hid-sensor-trigger hid-sensor-als hid-sensor-rotation hid-sensor-temperature hid-sensor-humidity target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus"

filter-modules.sh.fedora

@@ -0,0 +1,170 @@
+#! /bin/bash
+#
+# Called as filter-modules.sh list-of-modules Arch
+
+# This script filters the modules into the kernel-core and kernel-modules
+# subpackages.  We list out subsystems/subdirs to prune from the installed
+# module directory.  What is left is put into the kernel-core package.  What is
+# pruned is contained in the kernel-modules package.
+#
+# This file contains the default subsys/subdirs to prune from all architectures.
+# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
+# that contains the set of override lists to be used instead.  If a module or
+# subsys should be in kernel-modules on all arches, please change the defaults
+# listed here.
+
+# Overrides is individual modules which need to remain in kernel-core due to deps.
+overrides="cec"
+
+# Set the default dirs/modules to filter out
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb soundwire staging tty uio uwb w1"
+
+chardrvs="mwave pcmcia"
+
+netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
+
+ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell mellanox neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+
+inputdrvs="gameport tablet touchscreen"
+
+scsidrvs="aacraid advansys aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf wd719x"
+
+usbdrvs="atm image misc serial wusbcore"
+
+fsdrvs="affs befs coda cramfs dlm ecryptfs hfs hfsplus jfs jffs2 minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+
+drmdrvs="amd ast bridge gma500 i2c i915 mgag200 nouveau panel radeon"
+
+iiodrvs="accel adc afe common dac gyro health humidity light magnetometer multiplexer orientation potentiometer potentiostat pressure temperature"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial regmap-sdw hid-asus iTCO_wdt rnbd-client rnbd-server mlx5_vdpa"
+
+# Grab the arch-specific filter list overrides
+source ./filter-$2.sh
+
+filter_dir() {
+	filelist=$1
+	dir=$2
+
+	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${dir}.  Skipping."
+	else
+		grep -e "${dir}/" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+filter_ko() {
+	filelist=$1
+	mod=$2
+
+	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${mod}.ko  Skipping."
+	else
+		grep -e "${mod}.ko" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+# Filter the drivers/ subsystems
+for subsys in ${driverdirs}
+do
+	filter_dir $1 drivers/${subsys}
+done
+
+# Filter the networking drivers
+for netdrv in ${netdrvs}
+do
+	filter_dir $1 drivers/net/${netdrv}
+done
+
+# Filter the char drivers
+for char in ${chardrvs}
+do
+	filter_dir $1 drivers/char/${input}
+done
+
+# Filter the ethernet drivers
+for eth in ${ethdrvs}
+do
+	filter_dir $1 drivers/net/ethernet/${eth}
+done
+
+# SCSI
+for scsi in ${scsidrvs}
+do
+	filter_dir $1 drivers/scsi/${scsi}
+done
+
+# Input
+for input in ${inputdrvs}
+do
+	filter_dir $1 drivers/input/${input}
+done
+
+# USB
+for usb in ${usbdrvs}
+do
+	filter_dir $1 drivers/usb/${usb}
+done
+
+# Filesystems
+for fs in ${fsdrvs}
+do
+	filter_dir $1 fs/${fs}
+done
+
+# Network protocols
+for prot in ${netprots}
+do
+	filter_dir $1 kernel/net/${prot}
+done
+
+# DRM
+for drm in ${drmdrvs}
+do
+	filter_dir $1 drivers/gpu/drm/${drm}
+done
+
+# Just kill sound.
+filter_dir $1 kernel/sound
+
+# Now go through and filter any single .ko files that might have deps on the
+# things we filtered above
+for mod in ${singlemods}
+do
+        filter_ko $1 ${mod}
+done
+
+# Now process the override list to bring those modules back into core
+for mod in ${overrides}
+do
+	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
+	if [ $? -ne 0 ]
+        then
+                echo "Couldn't save ${mod}.ko  Skipping."
+        else
+                grep -e "/${mod}.ko" k-d.list >> $filelist
+                mv k-d.list.tmp k-d.list
+        fi
+
+done
+
+# Go through our generated drivers list and remove the .ko files.  We'll
+# restore them later.
+for mod in `cat k-d.list`
+do
+	rm -rf $mod
+done

filter-modules.sh.rhel

@@ -0,0 +1,168 @@
+#! /bin/bash
+#
+# Called as filter-modules.sh list-of-modules Arch
+
+# This script filters the modules into the kernel-core and kernel-modules
+# subpackages.  We list out subsystems/subdirs to prune from the installed
+# module directory.  What is left is put into the kernel-core package.  What is
+# pruned is contained in the kernel-modules package.
+#
+# This file contains the default subsys/subdirs to prune from all architectures.
+# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
+# that contains the set of override lists to be used instead.  If a module or
+# subsys should be in kernel-modules on all arches, please change the defaults
+# listed here.
+
+# Overrides is individual modules which need to remain in kernel-core due to deps.
+overrides="cec"
+
+# Set the default dirs/modules to filter out
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+chardrvs="mwave pcmcia"
+
+netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
+
+ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+
+inputdrvs="gameport tablet touchscreen"
+
+scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic hisi_sas isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf"
+
+usbdrvs="atm image misc serial wusbcore"
+
+fsdrvs="affs befs coda cramfs ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+
+drmdrvs="amd ast gma500 i2c i915 mgag200 nouveau radeon via "
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial ism hid-asus"
+
+# Grab the arch-specific filter list overrides
+source ./filter-$2.sh
+
+filter_dir() {
+	filelist=$1
+	dir=$2
+
+	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${dir}.  Skipping."
+	else
+		grep -e "${dir}/" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+filter_ko() {
+	filelist=$1
+	mod=$2
+
+	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${mod}.ko  Skipping."
+	else
+		grep -e "${mod}.ko" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+# Filter the drivers/ subsystems
+for subsys in ${driverdirs}
+do
+	filter_dir $1 drivers/${subsys}
+done
+
+# Filter the networking drivers
+for netdrv in ${netdrvs}
+do
+	filter_dir $1 drivers/net/${netdrv}
+done
+
+# Filter the char drivers
+for char in ${chardrvs}
+do
+	filter_dir $1 drivers/char/${input}
+done
+
+# Filter the ethernet drivers
+for eth in ${ethdrvs}
+do
+	filter_dir $1 drivers/net/ethernet/${eth}
+done
+
+# SCSI
+for scsi in ${scsidrvs}
+do
+	filter_dir $1 drivers/scsi/${scsi}
+done
+
+# Input
+for input in ${inputdrvs}
+do
+	filter_dir $1 drivers/input/${input}
+done
+
+# USB
+for usb in ${usbdrvs}
+do
+	filter_dir $1 drivers/usb/${usb}
+done
+
+# Filesystems
+for fs in ${fsdrvs}
+do
+	filter_dir $1 fs/${fs}
+done
+
+# Network protocols
+for prot in ${netprots}
+do
+	filter_dir $1 kernel/net/${prot}
+done
+
+# DRM
+for drm in ${drmdrvs}
+do
+	filter_dir $1 drivers/gpu/drm/${drm}
+done
+
+# Just kill sound.
+filter_dir $1 kernel/sound
+
+# Now go through and filter any single .ko files that might have deps on the
+# things we filtered above
+for mod in ${singlemods}
+do
+        filter_ko $1 ${mod}
+done
+
+# Now process the override list to bring those modules back into core
+for mod in ${overrides}
+do
+	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
+	if [ $? -ne 0 ]
+        then
+                echo "Couldn't save ${mod}.ko  Skipping."
+        else
+                grep -e "/${mod}.ko" k-d.list >> $filelist
+                mv k-d.list.tmp k-d.list
+        fi
+
+done
+
+# Go through our generated drivers list and remove the .ko files.  We'll
+# restore them later.
+for mod in `cat k-d.list`
+do
+	rm -rf $mod
+done

filter-ppc64le.sh.fedora

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the ppc64le override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc fpga infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls rnbd-client rnbd-server mlx5_vdpa"

filter-ppc64le.sh.rhel

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the ppc64le override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

filter-s390x.sh.fedora

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the s390x override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

filter-s390x.sh.rhel

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the s390x override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

filter-x86_64.sh.fedora

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the x86_64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

filter-x86_64.sh.rhel

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the x86_64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

generate_all_configs.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+# Adjusts the configuration options to build the variants correctly
+#
+# arg1: configuration to go in the primary variant
+# arg2: are we only generating debug configs
+
+
+PRIMARY=$1
+DEBUGBUILDSENABLED=$2
+
+if [ -z "$2" ]; then
+	exit 1
+fi
+
+if [ -z "$PRIMARY" ]; then
+	PRIMARY=rhel
+fi
+
+if [ "$PRIMARY" = "fedora" ]; then
+	SECONDARY=rhel
+else
+	SECONDARY=fedora
+fi
+
+for i in kernel-*-"$PRIMARY".config; do
+	NEW=kernel-"$VERSION"-$(echo "$i" | cut -d - -f2- | sed s/-"$PRIMARY"//)
+	#echo $NEW
+	mv "$i" "$NEW"
+done
+
+rm -f kernel-*-"$SECONDARY".config
+
+if [ "$DEBUGBUILDSENABLED" -eq 0 ]; then
+	for i in kernel-*debug*.config; do
+		base=$(echo "$i" | sed -r s/-?debug//g)
+		NEW=kernel-$(echo "$base" | cut -d - -f2-)
+		mv "$i" "$NEW"
+	done
+fi

generate_bls_conf.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+set -e
+
+# shellcheck disable=SC1091
+. /etc/os-release
+
+kernelver=$1 && shift
+rootfs=$1 && shift
+variant=$1 && shift
+
+output="${rootfs}/lib/modules/${kernelver}/bls.conf"
+date=$(date -u +%Y%m%d%H%M%S)
+
+if [ "${variant:-5}" = "debug" ]; then
+    debugname=" with debugging"
+    debugid="-debug"
+else
+    debugname=""
+    debugid=""
+fi
+
+# shellcheck will complain about bootprefix being referenced but not assigned,
+# but that is perfectly OK here.
+# shellcheck disable=SC2154
+cat > "$output" <<EOF
+title ${NAME} (${kernelver}) ${VERSION}${debugname}
+version ${kernelver}${debugid}
+linux ${bootprefix}/vmlinuz-${kernelver}
+initrd ${bootprefix}/initramfs-${kernelver}.img
+options \$kernelopts
+id ${ID}-${date}-${kernelver}${debugid}
+grub_users \$grub_users
+grub_arg --unrestricted
+grub_class kernel${variant}
+EOF

kernel-local

@@ -0,0 +1,2 @@
+# This file is intentionally left empty in the stock kernel. Its a nicety
+# added for those wanting to do custom rebuilds with altered config opts.

merge.pl

@@ -0,0 +1,72 @@
+#! /usr/bin/perl
+
+my @args=@ARGV;
+my %configvalues;
+my @configoptions;
+my $configcounter = 0;
+
+# optionally print out the architecture as the first line of our output
+my $arch = $args[2];
+if (defined $arch) {
+	print "# $arch\n";
+}
+
+# first, read the override file
+
+open (FILE,"$args[0]") || die "Could not open $args[0]";
+while (<FILE>) {
+	my $str = $_;
+	my $configname;
+
+	if (/\# ([\w]+) is not set/) {
+		$configname = $1;
+	} elsif (/^\#/) {
+		# fall through on comments like 'avoid CONFIG_FOO=y'
+		;
+	} elsif (/([\w]+)=/) {
+		$configname = $1;
+	}
+
+	if (defined($configname) && !exists($configvalues{$configname})) {
+		$configvalues{$configname} = $str;
+		$configoptions[$configcounter] = $configname;
+		$configcounter ++;
+	}
+};
+
+# now, read and output the entire configfile, except for the overridden
+# parts... for those the new value is printed.
+
+open (FILE2,"$args[1]") || die "Could not open $args[1]";
+while (<FILE2>) {
+	my $configname;
+
+	if (/\# ([\w]+) is not set/) {
+		$configname = $1;
+	} elsif (/^\#/) {
+		# fall through on comments like 'avoid CONFIG_FOO=y'
+		;
+	} elsif (/([\w]+)=/) {
+		$configname  = $1;
+	}
+
+	if (defined($configname) && exists($configvalues{$configname})) {
+		print "$configvalues{$configname}";
+		delete($configvalues{$configname});
+	} else {
+		print "$_";
+	}
+}
+
+# now print the new values from the overridden configfile
+my $counter = 0;
+
+while ($counter < $configcounter) {
+	my $configname = $configoptions[$counter];
+	if (exists($configvalues{$configname})) {
+		print "$configvalues{$configname}";
+	}
+	$counter++;
+}
+
+1;

mod-blacklist.sh

@@ -0,0 +1,164 @@
+#! /bin/bash
+# shellcheck disable=SC2164
+
+RpmDir=$1
+ModDir=$2
+Dir="$1/$2"
+# Note the list filename must have the format mod-[PACKAGE].list, for example,
+# mod-internal.list or mod-extra.list.  The PACKAGE is used to create a
+# override directory for the modules.
+List=$3
+Dest="$4"
+
+blacklist()
+{
+	cat > "$RpmDir/etc/modprobe.d/$1-blacklist.conf" <<-__EOF__
+	# This kernel module can be automatically loaded by non-root users. To
+	# enhance system security, the module is blacklisted by default to ensure
+	# system administrators make the module available for use as needed.
+	# See https://access.redhat.com/articles/3760101 for more details.
+	#
+	# Remove the blacklist by adding a comment # at the start of the line.
+	blacklist $1
+__EOF__
+}
+
+check_blacklist()
+{
+	mod=$(find "$RpmDir/$ModDir" -name "$1")
+	[ ! "$mod" ] && return 0
+	if modinfo "$mod" | grep -q '^alias:\s\+net-'; then
+		mod="${1##*/}"
+		mod="${mod%.ko*}"
+		echo "$mod has an alias that allows auto-loading. Blacklisting."
+		blacklist "$mod"
+	fi
+}
+
+find_depends()
+{
+	dep=$1
+	depends=$(modinfo "$dep" | sed -n -e "/^depends/ s/^depends:[ \t]*//p")
+	[ -z "$depends" ] && exit
+	for mod in ${depends//,/ }
+	do
+		match=$(grep "^$mod.ko" "$ListName")
+		[ -z "$match" ] && continue
+		# check if the module we are looking at is in mod-* too.
+		# if so we do not need to mark the dep as required.
+		mod2=${dep##*/}  # same as $(basename $dep), but faster
+		match2=$(grep "^$mod2" "$ListName")
+		if [ -n "$match2" ]
+		then
+			#echo $mod2 >> notreq.list
+			continue
+		fi
+		echo "$mod".ko >> req.list
+	done
+}
+
+foreachp()
+{
+	P=$(nproc)
+	bgcount=0
+	while read -r mod; do
+		$1 "$mod" &
+
+		bgcount=$((bgcount + 1))
+		if [ $bgcount -eq "$P" ]; then
+			wait -n
+			bgcount=$((bgcount - 1))
+		fi
+	done
+
+	wait
+}
+
+# Destination was specified on the command line
+test -n "$4" && echo "$0: Override Destination $Dest has been specified."
+
+pushd "$Dir"
+
+OverrideDir=$(basename "$List")
+OverrideDir=${OverrideDir%.*}
+OverrideDir=${OverrideDir#*-}
+mkdir -p "$OverrideDir"
+
+rm -rf modnames
+find . -name "*.ko" -type f > modnames
+# Look through all of the modules, and throw any that have a dependency in
+# our list into the list as well.
+rm -rf dep.list dep2.list
+rm -rf req.list req2.list
+touch dep.list req.list
+cp "$List" .
+
+# This variable needs to be exported because it is used in sub-script
+# executed by xargs
+ListName=$(basename "$List")
+export ListName
+
+foreachp find_depends < modnames
+
+sort -u req.list > req2.list
+sort -u "$ListName" > modules2.list
+join -v 1 modules2.list req2.list > modules3.list
+
+while IFS= read -r mod
+do
+    # get the path for the module
+    modpath=$(grep /"$mod" modnames)
+    [ -z "$modpath" ] && continue
+    echo "$modpath" >> dep.list
+done < modules3.list
+
+sort -u dep.list > dep2.list
+
+if [ -n "$Dest" ]; then
+    # now move the modules into the $Dest directory
+    while IFS= read -r mod
+    do
+	newpath=$(dirname "$mod" | sed -e "s/kernel\\//$Dest\//")
+	mkdir -p "$newpath"
+	mv "$mod" "$newpath"
+	echo "$mod" | sed -e "s/kernel\\//$Dest\//" | sed -e "s|^.|${ModDir}|g" >> "$RpmDir"/"$ListName"
+    done < dep2.list
+fi
+
+popd
+
+# If we're signing modules, we can't leave the .mod files for the .ko files
+# we've moved in .tmp_versions/.  Remove them so the Kbuild 'modules_sign'
+# target doesn't try to sign a non-existent file.  This is kinda ugly, but
+# so are the modules-* packages.
+
+while IFS= read -r mod
+do
+  modfile=$(basename "$mod" | sed -e 's/.ko/.mod/')
+  rm .tmp_versions/"$modfile"
+done < "$Dir"/dep2.list
+
+if [ -z "$Dest" ]; then
+	sed -e "s|^.|${ModDir}|g" "$Dir"/dep2.list > "$RpmDir/$ListName"
+	echo "./$RpmDir/$ListName created."
+	[ -d "$RpmDir/etc/modprobe.d/" ] || mkdir -p "$RpmDir/etc/modprobe.d/"
+	foreachp check_blacklist < "$List"
+fi
+
+# Many BIOS-es export a PNP-id which causes the floppy driver to autoload
+# even though most modern systems don't have a 3.5" floppy driver anymore
+# this replaces the old die_floppy_die.patch which removed the PNP-id from
+# the module
+
+floppylist=("$RpmDir"/"$ModDir"/extra/drivers/block/floppy.ko*)
+if [[ -n ${floppylist[0]} && -f ${floppylist[0]} ]]; then
+     blacklist "floppy"
+fi
+
+# avoid an empty kernel-extra package
+echo "$ModDir/$OverrideDir" >> "$RpmDir/$ListName"
+
+pushd "$Dir"
+rm modnames dep.list dep2.list req.list req2.list
+rm "$ListName" modules2.list modules3.list
+popd

mod-extra.list.fedora

@@ -0,0 +1,195 @@
+6pack.ko
+a3d.ko
+act200l-sir.ko
+actisys-sir.ko
+adi.ko
+aer_inject.ko
+af_802154.ko
+affs.ko
+ali-ircc.ko
+analog.ko
+appletalk.ko
+atm.ko
+avma1_cs.ko
+avm_cs.ko
+avmfritz.ko
+ax25.ko
+b1.ko
+bas_gigaset.ko
+batman-adv.ko
+baycom_par.ko
+baycom_ser_fdx.ko
+baycom_ser_hdx.ko
+befs.ko
+bpqether.ko
+br2684.ko
+capi.ko
+c_can.ko
+c_can_platform.ko
+clip.ko
+cobra.ko
+coda.ko
+cuse.ko
+db9.ko
+dccp_diag.ko
+dccp_ipv4.ko
+dccp_ipv6.ko
+dccp.ko
+dccp_probe.ko
+diva_idi.ko
+divas.ko
+dlm.ko
+ds1wm.ko
+ds2482.ko
+ds2490.ko
+dss1_divert.ko
+elsa_cs.ko
+ems_pci.ko
+ems_usb.ko
+esd_usb2.ko
+esi-sir.ko
+floppy.ko
+gamecon.ko
+gf2k.ko
+gfs2.ko
+gigaset.ko
+girbil-sir.ko
+grip.ko
+grip_mp.ko
+guillemot.ko
+hdlcdrv.ko
+hfc4s8s_l1.ko
+hfcmulti.ko
+hfcpci.ko
+hisax.ko
+hwa-rc.ko
+hysdn.ko
+i2400m.ko
+i2400m-sdio.ko
+i2400m-usb.ko
+ieee802154.ko
+iforce.ko
+interact.ko
+ipddp.ko
+ipx.ko
+isdn.ko
+joydump.ko
+kingsun-sir.ko
+ks959-sir.ko
+ksdazzle-sir.ko
+kvaser_pci.ko
+l2tp_core.ko
+l2tp_debugfs.ko
+l2tp_eth.ko
+l2tp_ip.ko
+l2tp_netlink.ko
+l2tp_ppp.ko
+lec.ko
+ma600-sir.ko
+magellan.ko
+mcp2120-sir.ko
+mISDN_core.ko
+mISDN_dsp.ko
+mkiss.ko
+mptbase.ko
+mptctl.ko
+mptfc.ko
+nci.ko
+ncpfs.ko
+netjet.ko
+netrom.ko
+nfc.ko
+nilfs2.ko
+ocfs2_dlmfs.ko
+ocfs2_dlm.ko
+ocfs2.ko
+ocfs2_nodemanager.ko
+ocfs2_stackglue.ko
+ocfs2_stack_o2cb.ko
+ocfs2_stack_user.ko
+old_belkin-sir.ko
+orinoco_cs.ko
+orinoco.ko
+orinoco_nortel.ko
+orinoco_pci.ko
+orinoco_plx.ko
+orinoco_usb.ko
+pcspkr.ko
+plx_pci.ko
+pn_pep.ko
+pppoatm.ko
+rds.ko
+rds_rdma.ko
+rds_tcp.ko
+rose.ko
+sch_atm.ko
+sch_cbq.ko
+sch_choke.ko
+sch_drr.ko
+sch_dsmark.ko
+sch_etf.ko
+sch_gred.ko
+sch_mqprio.ko
+sch_multiq.ko
+sch_netem.ko
+sch_qfq.ko
+sch_red.ko
+sch_sfb.ko
+sch_teql.ko
+sctp.ko
+sctp_probe.ko
+sidewinder.ko
+sja1000.ko
+sja1000_platform.ko
+slcan.ko
+slip.ko
+softing_cs.ko
+softing.ko
+spaceball.ko
+spaceorb.ko
+stinger.ko
+sysv.ko
+tcp_bic.ko
+tcp_highspeed.ko
+tcp_htcp.ko
+tcp_hybla.ko
+tcp_illinois.ko
+tcp_lp.ko
+tcp_scalable.ko
+tcp_vegas.ko
+tcp_veno.ko
+tcp_westwood.ko
+tcp_yeah.ko
+tekram-sir.ko
+tmdc.ko
+toim3232-sir.ko
+trancevibrator.ko
+turbografx.ko
+twidjoy.ko
+ubifs.ko
+ufs.ko
+umc.ko
+usbip-core.ko
+usbip-host.ko
+uwb.ko
+vcan.ko
+vhci-hcd.ko
+w1_bq27000.ko
+w1_ds2408.ko
+w1_ds2423.ko
+w1_ds2431.ko
+w1_ds2433.ko
+w1_ds2760.ko
+w1_ds2780.ko
+w1_ds2781.ko
+w1_ds28e04.ko
+w1_smem.ko
+w1_therm.ko
+w6692.ko
+walkera0701.ko
+wanrouter.ko
+warrior.ko
+whci.ko
+wire.ko
+yam.ko
+zhenhua.ko

mod-extra.list.rhel

@@ -0,0 +1,190 @@
+6pack.ko
+a3d.ko
+act200l-sir.ko
+actisys-sir.ko
+adi.ko
+aer_inject.ko
+af_802154.ko
+affs.ko
+ali-ircc.ko
+analog.ko
+appletalk.ko
+atm.ko
+avma1_cs.ko
+avm_cs.ko
+avmfritz.ko
+ax25.ko
+b1.ko
+bas_gigaset.ko
+batman-adv.ko
+baycom_par.ko
+baycom_ser_fdx.ko
+baycom_ser_hdx.ko
+befs.ko
+bpqether.ko
+br2684.ko
+capi.ko
+c_can.ko
+c_can_platform.ko
+clip.ko
+cobra.ko
+coda.ko
+cuse.ko
+db9.ko
+dccp_diag.ko
+dccp_ipv4.ko
+dccp_ipv6.ko
+dccp.ko
+dccp_probe.ko
+diva_idi.ko
+divas.ko
+ds1wm.ko
+ds2482.ko
+ds2490.ko
+dss1_divert.ko
+elsa_cs.ko
+ems_pci.ko
+ems_usb.ko
+esd_usb2.ko
+esi-sir.ko
+gamecon.ko
+gf2k.ko
+gigaset.ko
+girbil-sir.ko
+grip.ko
+grip_mp.ko
+guillemot.ko
+hdlcdrv.ko
+hfc4s8s_l1.ko
+hfcmulti.ko
+hfcpci.ko
+hisax.ko
+hwa-rc.ko
+hysdn.ko
+i2400m.ko
+i2400m-sdio.ko
+i2400m-usb.ko
+ieee802154.ko
+iforce.ko
+interact.ko
+ipddp.ko
+ipx.ko
+isdn.ko
+joydump.ko
+kingsun-sir.ko
+ks959-sir.ko
+ksdazzle-sir.ko
+kvaser_pci.ko
+l2tp_core.ko
+l2tp_debugfs.ko
+l2tp_eth.ko
+l2tp_ip.ko
+l2tp_netlink.ko
+l2tp_ppp.ko
+lec.ko
+ma600-sir.ko
+magellan.ko
+mcp2120-sir.ko
+mISDN_core.ko
+mISDN_dsp.ko
+mkiss.ko
+mptbase.ko
+mptctl.ko
+mptfc.ko
+nci.ko
+ncpfs.ko
+netjet.ko
+netrom.ko
+nfc.ko
+nilfs2.ko
+ocfs2_dlmfs.ko
+ocfs2_dlm.ko
+ocfs2.ko
+ocfs2_nodemanager.ko
+ocfs2_stackglue.ko
+ocfs2_stack_o2cb.ko
+ocfs2_stack_user.ko
+old_belkin-sir.ko
+orinoco_cs.ko
+orinoco.ko
+orinoco_nortel.ko
+orinoco_pci.ko
+orinoco_plx.ko
+orinoco_usb.ko
+plx_pci.ko
+pn_pep.ko
+pppoatm.ko
+rds.ko
+rds_rdma.ko
+rds_tcp.ko
+rose.ko
+sch_atm.ko
+sch_cbq.ko
+sch_choke.ko
+sch_drr.ko
+sch_dsmark.ko
+sch_gred.ko
+sch_mqprio.ko
+sch_multiq.ko
+sch_netem.ko
+sch_qfq.ko
+sch_red.ko
+sch_sfb.ko
+sch_teql.ko
+sctp.ko
+sctp_probe.ko
+sidewinder.ko
+sja1000.ko
+sja1000_platform.ko
+slcan.ko
+slip.ko
+softing_cs.ko
+softing.ko
+spaceball.ko
+spaceorb.ko
+stinger.ko
+sysv.ko
+tcp_bic.ko
+tcp_highspeed.ko
+tcp_htcp.ko
+tcp_hybla.ko
+tcp_illinois.ko
+tcp_lp.ko
+tcp_scalable.ko
+tcp_vegas.ko
+tcp_veno.ko
+tcp_westwood.ko
+tcp_yeah.ko
+tekram-sir.ko
+tmdc.ko
+toim3232-sir.ko
+trancevibrator.ko
+turbografx.ko
+twidjoy.ko
+ubifs.ko
+ufs.ko
+umc.ko
+usbip-core.ko
+usbip-host.ko
+uwb.ko
+vcan.ko
+vhci-hcd.ko
+w1_bq27000.ko
+w1_ds2408.ko
+w1_ds2423.ko
+w1_ds2431.ko
+w1_ds2433.ko
+w1_ds2760.ko
+w1_ds2780.ko
+w1_ds2781.ko
+w1_ds28e04.ko
+w1_smem.ko
+w1_therm.ko
+w6692.ko
+walkera0701.ko
+wanrouter.ko
+warrior.ko
+whci.ko
+wire.ko
+yam.ko
+zhenhua.ko

mod-internal.list

@@ -0,0 +1,4 @@
+mac80211_hwsim
+netdevsim
+pktgen
+rocker

mod-sign.sh

@@ -0,0 +1,37 @@
+#! /bin/bash
+
+# The modules_sign target checks for corresponding .o files for every .ko that
+# is signed. This doesn't work for package builds which re-use the same build
+# directory for every flavour, and the .config may change between flavours.
+# So instead of using this script to just sign lib/modules/$KernelVer/extra,
+# sign all .ko in the buildroot.
+
+# This essentially duplicates the 'modules_sign' Kbuild target and runs the
+# same commands for those modules.
+
+MODSECKEY=$1
+MODPUBKEY=$2
+moddir=$3
+
+modules=$(find "$moddir" -type f -name '*.ko')
+
+NPROC=$(nproc)
+[ -z "$NPROC" ] && NPROC=1
+
+# NB: this loop runs 2000+ iterations. Try to be fast.
+echo "$modules" | xargs -r -n16 -P $NPROC sh -c "
+for mod; do
+    ./scripts/sign-file sha256 $MODSECKEY $MODPUBKEY \$mod
+    rm -f \$mod.sig \$mod.dig
+done
+" DUMMYARG0   # xargs appends ARG1 ARG2..., which go into $mod in for loop.
+
+RANDOMMOD=$(echo "$modules" | sort -R | head -n 1)
+if [ "~Module signature appended~" != "$(tail -c 28 "$RANDOMMOD")" ]; then
+    echo "*****************************"
+    echo "*** Modules are unsigned! ***"
+    echo "*****************************"
+    exit 1
+fi
+
+exit 0

parallel_xz.sh

@@ -0,0 +1,26 @@
+#!/bin/sh
+# Reads filenames on stdin, xz-compresses each in place.
+# Not optimal for "compress relatively few, large files" scenario!
+
+# How many xz's to run in parallel:
+procgroup=""
+while test "$#" != 0; do
+	# Get it from -jNUM
+	N="${1#-j}"
+	if test "$N" = "$1"; then
+		# Not -j<something> - warn and ignore
+		echo "parallel_xz: warning: unrecognized argument: '$1'"
+	else
+		procgroup="$N"
+	fi
+	shift
+done
+
+# If told to use only one cpu:
+test "$procgroup" || exec xargs -r xz
+test "$procgroup" = 1 && exec xargs -r xz
+
+# xz has some startup cost. If files are really small,
+# this cost might be significant. To combat this,
+# process several files (in sequence) by each xz process via -n 16:
+exec xargs -r -n 16 -P "$procgroup" xz

process_configs.sh

@@ -0,0 +1,346 @@
+#!/bin/bash
+#
+# This script takes the merged config files and processes them through oldconfig
+# and listnewconfig
+#
+# Globally disable suggestion of appending '|| exit' or '|| return' to cd/pushd/popd commands
+# shellcheck disable=SC2164
+
+usage()
+{
+	# alphabetical order please
+	echo "process_configs.sh [ options ] package_name kernel_version"
+	echo "     -a: report all errors, equivalent to [-c -n -w -i]"
+	echo "     -c: error on mismatched config options"
+	echo "     -i: continue on error"
+	echo "     -n: error on unset config options"
+	echo "     -t: test run, do not overwrite original config"
+	echo "     -w: error on misconfigured config options"
+	echo "     -z: commit new configs to pending directory"
+	echo ""
+	echo "     A special CONFIG file tag, process_configs_known_broken can be added as a"
+	echo "     comment to any CONFIG file.  This tag indicates that there is no way to "
+	echo "     fix a CONFIG's entry.  This tag should only be used in extreme cases"
+	echo "     and is not to be used as a workaround to solve CONFIG problems."
+	exit 1
+}
+
+die()
+{
+	echo "$1"
+	exit 1
+}
+
+# stupid function to find top of tree to do kernel make configs
+switch_to_toplevel()
+{
+	path="$(pwd)"
+	while test -n "$path"
+	do
+		test -e "$path"/MAINTAINERS && \
+			test -d "$path"/drivers && \
+			break
+
+		path=$(dirname "$path")
+	done
+
+	test -n "$path"  || die "Can't find toplevel"
+	echo "$path"
+}
+
+checkoptions()
+{
+	/usr/bin/awk '
+
+		/is not set/ {
+			split ($0, a, "#");
+			split(a[2], b);
+			if (NR==FNR) {
+				configs[b[1]]="is not set";
+			} else {
+				if (configs[b[1]] != "" && configs[b[1]] != "is not set")
+					 print "Found # "b[1] " is not set, after generation, had " b[1] " " configs[b[1]] " in Source tree";
+			}
+		}
+
+		/=/     {
+			split ($0, a, "=");
+			if (NR==FNR) {
+				configs[a[1]]=a[2];
+			} else {
+				if (configs[a[1]] != "" && configs[a[1]] != a[2])
+					 print "Found "a[1]"="a[2]" after generation, had " a[1]"="configs[a[1]]" in Source tree";
+			}
+		}
+	' "$1" "$2" > .mismatches
+
+	checkoptions_error=false
+	if test -s .mismatches
+	then
+		while read -r LINE
+		do
+			if find ./ -name "$(echo "$LINE" | awk -F "=" ' { print $1 } ' | awk ' { print $2 }')" | xargs -0 grep ^ | grep -q "process_configs_known_broken"; then
+				# This is a known broken config.
+				# See script help warning.
+				checkoptions_error=false
+			else
+				checkoptions_error=true
+				break
+			fi
+		done < .mismatches
+
+		! $checkoptions_error && return
+
+		echo "Error: Mismatches found in configuration files"
+		cat .mismatches
+		RETURNCODE=1
+		[ "$CONTINUEONERROR" ] || exit 1
+	fi
+}
+
+parsenewconfigs()
+{
+	tmpdir=$(mktemp -d)
+
+	# This awk script reads the output of make listnewconfig
+	# and puts it into CONFIG_FOO files. Using the output of
+	# listnewconfig is much easier to ensure we get the default
+	# output.
+        /usr/bin/awk -v BASE="$tmpdir" '
+                /is not set/ {
+                        split ($0, a, "#");
+                        split(a[2], b);
+                        OUT_FILE=BASE"/"b[1];
+                        print $0 >> OUT_FILE;
+                }
+
+                /=/     {
+                        split ($0, a, "=");
+                        OUT_FILE=BASE"/"a[1];
+                        if (a[2] == "n")
+                                print "# " a[1] " is not set" >> OUT_FILE;
+                        else
+                                print $0 >> OUT_FILE;
+                }
+
+        ' .newoptions
+
+	# This awk script parses the output of helpnewconfig.
+	# Each option is separated between ----- markers
+	# The goal is to put all the help text as a comment in
+	# each CONFIG_FOO file. Because of how awk works
+	# there's a lot of moving files around and catting to
+	# get what we need.
+        /usr/bin/awk -v BASE="$tmpdir" '
+                BEGIN { inpatch=0;
+			outfile="none";
+                        symbol="none"; }
+                /^CONFIG_.*:$/ {
+                        split($0, a, ":");
+                        symbol=a[1];
+                        outfile=BASE "/fake_"symbol
+                }
+                /-----/ {
+			if (inpatch == 0) {
+				inpatch = 1;
+			}
+                        else {
+                                if (symbol != "none") {
+                                    system("cat " outfile " " BASE "/" symbol " > " BASE "/tmpf");
+                                    system("mv " BASE "/tmpf " BASE "/" symbol);
+                                    symbol="none"
+				}
+                                outfile="none"
+				inpatch = 0;
+                        }
+                }
+                !/-----/ {
+                        if (inpatch == 1 && outfile != "none") {
+                                print "# "$0 >> outfile;
+                        }
+                }
+
+
+        ' .helpnewconfig
+
+	pushd "$tmpdir" &> /dev/null
+	rm fake_*
+	popd &> /dev/null
+	for f in "$tmpdir"/*; do
+		[[ -e "$f" ]] || break
+		cp "$f" "$SCRIPT_DIR/pending$FLAVOR/generic/"
+	done
+
+	rm -rf "$tmpdir"
+}
+
+function commit_new_configs()
+{
+	# assume we are in $source_tree/configs, need to get to top level
+	pushd "$(switch_to_toplevel)" &>/dev/null
+
+	for cfg in "$SCRIPT_DIR/${PACKAGE_NAME}${KVERREL}${SUBARCH}"*.config
+	do
+		arch=$(head -1 "$cfg" | cut -b 3-)
+		cfgtmp="${cfg}.tmp"
+		cfgorig="${cfg}.orig"
+		cat "$cfg" > "$cfgorig"
+
+		if [ "$arch" = "EMPTY" ]
+		then
+			# This arch is intentionally left blank
+			continue
+		fi
+		echo -n "Checking for new configs in $cfg ... "
+
+		make ARCH="$arch" KCONFIG_CONFIG="$cfgorig" listnewconfig >& .listnewconfig
+		grep -E 'CONFIG_' .listnewconfig > .newoptions
+		if test -s .newoptions
+		then
+			make ARCH="$arch" KCONFIG_CONFIG="$cfgorig" helpnewconfig >& .helpnewconfig
+			parsenewconfigs
+		fi
+		rm .newoptions
+		echo "done"
+	done
+
+	git add "$SCRIPT_DIR/pending$FLAVOR"
+	git commit -m "[redhat] AUTOMATIC: New configs"
+}
+
+function process_configs()
+{
+	# assume we are in $source_tree/configs, need to get to top level
+	pushd "$(switch_to_toplevel)" &>/dev/null
+
+	for cfg in "$SCRIPT_DIR/${PACKAGE_NAME}${KVERREL}${SUBARCH}"*.config
+	do
+		arch=$(head -1 "$cfg" | cut -b 3-)
+		cfgtmp="${cfg}.tmp"
+		cfgorig="${cfg}.orig"
+		cat "$cfg" > "$cfgorig"
+
+		if [ "$arch" = "EMPTY" ]
+		then
+			# This arch is intentionally left blank
+			continue
+		fi
+		echo -n "Processing $cfg ... "
+
+		make ARCH="$arch" KCONFIG_CONFIG="$cfgorig" listnewconfig >& .listnewconfig
+		grep -E 'CONFIG_' .listnewconfig > .newoptions
+		if test -n "$NEWOPTIONS" && test -s .newoptions
+		then
+			echo "Found unset config items, please set them to an appropriate value"
+			cat .newoptions
+			rm .newoptions
+			RETURNCODE=1
+			[ "$CONTINUEONERROR" ] || exit 1
+		fi
+		rm .newoptions
+
+		grep -E 'config.*warning' .listnewconfig > .warnings
+		if test -n "$CHECKWARNINGS" && test -s .warnings
+		then
+			echo "Found misconfigured config items, please set them to an appropriate value"
+			cat .warnings
+			rm .warnings
+			RETURNCODE=1
+			[ "$CONTINUEONERROR" ] || exit 1
+		fi
+		rm .warnings
+
+		rm .listnewconfig
+
+		make ARCH="$arch" KCONFIG_CONFIG="$cfgorig" olddefconfig > /dev/null || exit 1
+		echo "# $arch" > "$cfgtmp"
+		cat "$cfgorig" >> "$cfgtmp"
+		if test -n "$CHECKOPTIONS"
+		then
+			checkoptions "$cfg" "$cfgtmp"
+		fi
+		# if test run, don't overwrite original
+		if test -n "$TESTRUN"
+		then
+			rm -f "$cfgtmp"
+		else
+			mv "$cfgtmp" "$cfg"
+		fi
+		rm -f "$cfgorig"
+		echo "done"
+	done
+	rm "$SCRIPT_DIR"/*.config*.old
+	popd > /dev/null
+
+	echo "Processed config files are in $SCRIPT_DIR"
+}
+
+CHECKOPTIONS=""
+CONTINUEONERROR=""
+NEWOPTIONS=""
+TESTRUN=""
+CHECKWARNINGS=""
+
+RETURNCODE=0
+
+while [[ $# -gt 0 ]]
+do
+	key="$1"
+	case $key in
+		-a)
+			CHECKOPTIONS="x"
+			CONTINUEONERROR="x"
+			NEWOPTIONS="x"
+			CHECKWARNINGS="x"
+			;;
+		-c)
+			CHECKOPTIONS="x"
+			;;
+		-h)
+			usage
+			;;
+		-i)
+			CONTINUEONERROR="x"
+			;;
+		-n)
+			NEWOPTIONS="x"
+			;;
+		-t)
+			TESTRUN="x"
+			;;
+		-w)
+			CHECKWARNINGS="x"
+			;;
+		-z)
+			COMMITNEWCONFIGS="x"
+			;;
+		*)
+			break;;
+	esac
+	shift
+done
+
+PACKAGE_NAME="${1:-kernel}" # defines the package name used
+KVERREL="$(test -n "$2" && echo "-$2" || echo "")"
+SUBARCH="$(test -n "$3" && echo "-$3" || echo "")"
+FLAVOR="$(test -n "$4" && echo "-$4" || echo "-common")"
+SCRIPT=$(readlink -f "$0")
+SCRIPT_DIR=$(dirname "$SCRIPT")
+
+# Most RHEL options are options we want in Fedora so RHEL pending settings head
+# to common/
+if [ "$FLAVOR" = "-rhel" ]
+then
+	FLAVOR="-common"
+fi
+
+# to handle this script being a symlink
+cd "$SCRIPT_DIR"
+
+if test -n "$COMMITNEWCONFIGS"; then
+	commit_new_configs
+else
+	process_configs
+fi
+
+exit $RETURNCODE

sources

@@ -0,0 +1,3 @@
+SHA512 (linux-5.11-rc3.tar.xz) = 022bc1e6c5d73eb4ab5873ec4424f6696af1cbc8c0b20297ba71224eb0d60ac4cfbf0fb67943684e4d2292226267f977632a536a77a148140941899d09224526
+SHA512 (kernel-abi-whitelists-5.11.0-0.rc3.122.tar.bz2) = 0aad878bebf0bf7ece18a7b798d573cc85e4e8b63fb99f97f0a895b366f3d963645afa08327febff2f6ac17b88e09d133901303f663665e9c4652949242f8ad9
+SHA512 (kernel-kabi-dw-5.11.0-0.rc3.122.tar.bz2) = 05599b2f821ed91e9384d9cc4873692d244659ff79078753f046549776a852faabaa992d58924365dd2963b0c16aff855c7ef3bee8babae2a295294a4f113199

update_scripts.sh

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if [ -z "$1" ]; then
+	exit 1
+fi
+
+TARGET="$1"
+
+for i in "$RPM_SOURCE_DIR"/*."$TARGET"; do
+	NEW=${i%.$TARGET}
+	cp "$i" "$NEW"
+done

x509.genkey.fedora

@@ -0,0 +1,16 @@
+[ req ]
+default_bits = 4096
+distinguished_name = req_distinguished_name
+prompt = no
+x509_extensions = myexts
+
+[ req_distinguished_name ]
+O = Fedora
+CN = Fedora kernel signing key
+emailAddress = kernel-team@fedoraproject.org
+
+[ myexts ]
+basicConstraints=critical,CA:FALSE
+keyUsage=digitalSignature
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid

x509.genkey.rhel

@@ -0,0 +1,16 @@
+[ req ]
+default_bits = 3072
+distinguished_name = req_distinguished_name
+prompt = no
+x509_extensions = myexts
+
+[ req_distinguished_name ]
+O = Red Hat
+CN = Red Hat Enterprise Linux kernel signing key
+emailAddress = secalert@redhat.com
+
+[ myexts ]
+basicConstraints=critical,CA:FALSE
+keyUsage=digitalSignature
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid