kernel-5.9.0-0.rc8.20201007git7575fdda569b.29

* Wed Oct 07 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc8.20201007git7575fdda569b.29]
- Merge ark-patches
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
This commit is contained in:
Justin M. Forbes 2020-10-07 09:54:44 -05:00
parent 5f7d08ee5f
commit f7a55ba381
80 changed files with 3169 additions and 6728 deletions

View File

@ -1,71 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Al Stone <ahs3@redhat.com>
Date: Tue, 27 Feb 2018 00:21:23 -0500
Subject: [PATCH] ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
Message-id: <20180227002123.21608-1-ahs3@redhat.com>
Patchwork-id: 206052
O-Subject: [RHEL8 BZ1518076 PATCH] ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
Bugzilla: 1518076
RH-Acked-by: Mark Salter <msalter@redhat.com>
RH-Acked-by: Jeremy McNicoll <jmcnicol@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1518076
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=15417197
Tested: compile-only; several other patches are required for full booting
QE has tested limited boot (see comment#12 of BZ)
This is a re-post of a RHEL-ALT-7.5 patch specific to aarch64 moonshots
that we use in beaker. It is required for these machines to boot.
commit 8a663a264863efedf8bb4a9d76ac603920fdd739
Author: Robert Richter <rrichter@redhat.com>
Date: Wed Aug 16 19:49:30 2017 -0400
[acpi] APEI: arm64: Ignore broken HPE moonshot APEI support
From: Mark Salter <msalter@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1344237
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=13768971
Tested: Booted on moonshot with patched 4.11.0-20 kernel
Upstream: RHEL-only
The aarch64 HP moonshot platforms we have in beaker and elsewhere have
a firmware bug which causes a spurious fatal memory error via APEI at
boot time. This platform is no longer supported and no further firmware
updates are expected. This is a downstream-only hack to avoid the problem
by bailing out of HEST table probing if we detect a moonshot HEST table.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Robert Richter <rrichter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/acpi/apei/hest.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 6e980fe16772..37bc003e7a83 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -88,6 +88,14 @@ int apei_hest_parse(apei_hest_func_t func, void *data)
if (hest_disable || !hest_tab)
return -EINVAL;
+#ifdef CONFIG_ARM64
+ /* Ignore broken firmware */
+ if (!strncmp(hest_tab->header.oem_id, "HPE ", 6) &&
+ !strncmp(hest_tab->header.oem_table_id, "ProLiant", 8) &&
+ MIDR_IMPLEMENTOR(read_cpuid_id()) == ARM_CPU_IMP_APM)
+ return -EINVAL;
+#endif
+
hest_hdr = (struct acpi_hest_header *)(hest_tab + 1);
for (i = 0; i < hest_tab->error_source_count; i++) {
len = hest_esrc_len(hest_hdr);
--
2.28.0

View File

@ -1,75 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 10 May 2018 17:38:43 -0400
Subject: [PATCH] ACPI / irq: Workaround firmware issue on X-Gene based m400
Message-id: <20180510173844.29580-3-msalter@redhat.com>
Patchwork-id: 214383
O-Subject: [RHEL-8 BZ1519554 2/3] ACPI / irq: Workaround firmware issue on X-Gene based m400
Bugzilla: 1519554
RH-Acked-by: Al Stone <astone@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1519554
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16144520
The ACPI firmware on the xgene-based m400 platorms erroneously
describes its UART interrupt as ACPI_PRODUCER rather than
ACPI_CONSUMER. This leads to the UART driver being unable to
find its interrupt and the kernel unable find a console.
Work around this by avoiding the producer/consumer check
for X-Gene UARTs.
Upstream Status: RHEL only
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/acpi/irq.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c
index e209081d644b..7484bcf59a1b 100644
--- a/drivers/acpi/irq.c
+++ b/drivers/acpi/irq.c
@@ -126,6 +126,7 @@ struct acpi_irq_parse_one_ctx {
unsigned int index;
unsigned long *res_flags;
struct irq_fwspec *fwspec;
+ bool skip_producer_check;
};
/**
@@ -197,7 +198,8 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
return AE_CTRL_TERMINATE;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
eirq = &ares->data.extended_irq;
- if (eirq->producer_consumer == ACPI_PRODUCER)
+ if (!ctx->skip_producer_check &&
+ eirq->producer_consumer == ACPI_PRODUCER)
return AE_OK;
if (ctx->index >= eirq->interrupt_count) {
ctx->index -= eirq->interrupt_count;
@@ -232,8 +234,19 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
static int acpi_irq_parse_one(acpi_handle handle, unsigned int index,
struct irq_fwspec *fwspec, unsigned long *flags)
{
- struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec };
+ struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec, false };
+ /*
+ * Firmware on arm64-based HPE m400 platform incorrectly marks
+ * its UART interrupt as ACPI_PRODUCER rather than ACPI_CONSUMER.
+ * Don't do the producer/consumer check for that device.
+ */
+ if (IS_ENABLED(CONFIG_ARM64)) {
+ struct acpi_device *adev = acpi_bus_get_acpi_device(handle);
+
+ if (adev && !strcmp(acpi_device_hid(adev), "APMC0D08"))
+ ctx.skip_producer_check = true;
+ }
acpi_walk_resources(handle, METHOD_NAME__CRS, acpi_irq_parse_one_cb, &ctx);
return ctx.rc;
}
--
2.28.0

View File

@ -1,86 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Mon, 30 Sep 2019 14:59:25 +0900
Subject: [PATCH] ARM: fix __get_user_check() in case uaccess_* calls are not
inlined
KernelCI reports that bcm2835_defconfig is no longer booting since
commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly"):
https://lkml.org/lkml/2019/9/26/825
I also received a regression report from Nicolas Saenz Julienne:
https://lkml.org/lkml/2019/9/27/263
This problem has cropped up on arch/arm/config/bcm2835_defconfig
because it enables CONFIG_CC_OPTIMIZE_FOR_SIZE. The compiler tends
to prefer not inlining functions with -Os. I was able to reproduce
it with other boards and defconfig files by manually enabling
CONFIG_CC_OPTIMIZE_FOR_SIZE.
The __get_user_check() specifically uses r0, r1, r2 registers.
So, uaccess_save_and_enable() and uaccess_restore() must be inlined
in order to avoid those registers being overwritten in the callees.
Prior to commit 9012d011660e ("compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING"), the 'inline' marker was always enough for
inlining functions, except on x86.
Since that commit, all architectures can enable CONFIG_OPTIMIZE_INLINING.
So, __always_inline is now the only guaranteed way of forcible inlining.
I want to keep as much compiler's freedom as possible about the inlining
decision. So, I changed the function call order instead of adding
__always_inline around.
Call uaccess_save_and_enable() before assigning the __p ("r0"), and
uaccess_restore() after evacuating the __e ("r0").
Fixes: 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/include/asm/uaccess.h | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index b5fdd30252f8..d43ceaa78269 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -195,11 +195,12 @@ extern int __get_user_64t_4(void *);
#define __get_user_check(x, p) \
({ \
unsigned long __limit = current_thread_info()->addr_limit - 1; \
+ unsigned int __ua_flags = uaccess_save_and_enable(); \
register typeof(*(p)) __user *__p asm("r0") = (p); \
register __inttype(x) __r2 asm("r2"); \
register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
- unsigned int __ua_flags = uaccess_save_and_enable(); \
+ unsigned int __err; \
switch (sizeof(*(__p))) { \
case 1: \
if (sizeof((x)) >= 8) \
@@ -227,9 +228,10 @@ extern int __get_user_64t_4(void *);
break; \
default: __e = __get_user_bad(); break; \
} \
- uaccess_restore(__ua_flags); \
+ __err = __e; \
x = (typeof(*(p))) __r2; \
- __e; \
+ uaccess_restore(__ua_flags); \
+ __err; \
})
#define get_user(x, p) \
--
2.28.0

View File

@ -1,32 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Thu, 3 May 2012 20:27:11 +0100
Subject: [PATCH] ARM: tegra: usb no reset
Patch for disconnect issues with storage attached to a
tegra-ehci controller
---
drivers/usb/core/hub.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 052d5accfe9b..fac58cf619da 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5517,6 +5517,13 @@ static void hub_event(struct work_struct *work)
(u16) hub->change_bits[0],
(u16) hub->event_bits[0]);
+ /* Don't disconnect USB-SATA on TrimSlice */
+ if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
+ if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
+ (hub->event_bits[0] == 0x2))
+ hub->event_bits[0] = 0;
+ }
+
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
usb_lock_device(hdev);
--
2.28.0

View File

@ -1,239 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Wed, 13 Nov 2019 14:44:31 -0500
Subject: [PATCH] Add Red Hat tainting
Message-id: <20191113144431.9403-5-labbott@redhat.com>
Patchwork-id: 286078
O-Subject: [ARK INTERNAL PATCHv2 4/4] [redhat] Add Red Hat tainting
Bugzilla:
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
This is a combination of the following commits including support
for adding CONFIG_RH_DEPRECATED support
rh_taint: add support
Message-id: <1524831536-47239-1-git-send-email-darcari@redhat.com>
Patchwork-id: 211655
O-Subject: [RHEL8.0 BZ 1565704 v2] rh_taint: add support
Bugzilla: 1565704
RH-Acked-by: Jonathan Toppins <jtoppins@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1565704
Build Info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=15910441
Upstream: RHEL Only
Test: Sanity boot of brew build. Previous private build testing of functions.
rh_taint.c adds the following functions which are utilized by Red Hat to
indicate limited or no support for hardware and/or drivers.
mark_hardware_unsupported
mark_hardware_deprecated
mark_tech_preview
See code comments for usage.
RHEL8 change: TAINT_AUX will be used in place of TAINT_TECH_PREVIEW as it
limits the number RHEL only changes that must be made to the kernel.
If at a later date it is determined that additional flags are required,
the associated RHEL only infrastructure can be added at that time.
Cc: David Arcari <darcari@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
rh_taint: add support for marking driver as unsupported
Message-id: <f42d35b07bd02f34b14a6341a219c80b21a8aff9.1524523802.git.jtoppins@redhat.com>
Patchwork-id: 211020
O-Subject: [RHEL8.0] rh_taint: add support for marking driver as unsupported
Bugzilla: 1565704
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
RH-Acked-by: David Arcari <darcari@redhat.com>
In some cases a driver needs to be enabled by Red Hat to support internal
testing but the driver is not intended to be supported on customer hardware.
This adds a function "make_driver_unsupported()" to facilitate such
situations. The function will print a kernel log message.
Bugzilla: 1565704
Build Info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=15873552
Tested: compile only
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
rh_taint: correct loaddable module support dependencies
Message-id: <20181123111337.26898-5-prudo@redhat.com>
Patchwork-id: 233658
O-Subject: [ARK PATCH RESEND v2 4/8] [kernel] rh_taint: correct loaddable module support dependencies
Bugzilla: 1652266
RH-Acked-by: Jakub Racek <jracek@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
RH-Acked-by: Cornelia Huck <cohuck@redhat.com>
Bugzilla: 1652266
Build Info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=19252944
Upstream Status: RHEL_only
The kernel configuration for the s390/zfcpdump kernel variant turns
loaddable module support off. The build breaks in rh_taint.c due to
compiler errors caused by dereferencing struct module variables which
is just a declaration if CONFIG_MODULES is not set.
To solve this build break, access struct module members only if
CONFIG_MODULES is enabled.
Upstream Status: RHEL only
Signed-off-by: Philipp Rudo <prudo@redhat.com>
---
include/linux/kernel.h | 15 +++++++
kernel/Makefile | 1 +
kernel/rh_taint.c | 93 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 109 insertions(+)
create mode 100644 kernel/rh_taint.c
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 7339a00c895e..19291af895eb 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -1039,4 +1039,19 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
/* OTHER_WRITABLE? Generally considered a bad idea. */ \
BUILD_BUG_ON_ZERO((perms) & 2) + \
(perms))
+
+struct module;
+
+#ifdef CONFIG_RH_DISABLE_DEPRECATED
+void mark_hardware_unsupported(const char *msg);
+void mark_hardware_deprecated(const char *msg);
+void mark_tech_preview(const char *msg, struct module *mod);
+void mark_driver_unsupported(const char *name);
+#else
+static inline void mark_hardware_unsupported(const char *msg) { }
+static inline void mark_hardware_deprecated(const char *msg) { }
+static inline void mark_tech_preview(const char *msg, struct module *mod) { }
+static inline void mark_driver_unsupported(const char *name) { }
+#endif
+
#endif
diff --git a/kernel/Makefile b/kernel/Makefile
index 5350fd292910..d744b63c07dc 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -13,6 +13,7 @@ obj-y = fork.o exec_domain.o panic.o \
async.o range.o smpboot.o ucount.o regset.o
obj-$(CONFIG_BPFILTER) += usermode_driver.o
+obj-$(CONFIG_RH_DISABLE_DEPRECATED) += rh_taint.o
obj-$(CONFIG_MODULES) += kmod.o
obj-$(CONFIG_MULTIUSER) += groups.o
diff --git a/kernel/rh_taint.c b/kernel/rh_taint.c
new file mode 100644
index 000000000000..8d1641710ed7
--- /dev/null
+++ b/kernel/rh_taint.c
@@ -0,0 +1,93 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+/*
+ * The following functions are used by Red Hat to indicate to users that
+ * hardware and drivers are unsupported, or have limited support in RHEL major
+ * and minor releases. These functions output loud warning messages to the end
+ * user and should be USED WITH CAUTION.
+ *
+ * Any use of these functions _MUST_ be documented in the RHEL Release Notes,
+ * and have approval of management.
+ */
+
+/**
+ * mark_hardware_unsupported() - Mark hardware, class, or type as unsupported.
+ * @msg: Hardware name, class, or type
+ *
+ * Called to mark a device, class of devices, or types of devices as not having
+ * support in any RHEL minor release. This does not TAINT the kernel. Red Hat
+ * will not fix bugs against this hardware in this minor release. Red Hat may
+ * declare support in a future major or minor update release. This cannot be
+ * used to mark drivers unsupported.
+ */
+void mark_hardware_unsupported(const char *msg)
+{
+ /* Print one single message */
+ pr_crit("Warning: %s - this hardware has not undergone testing by Red Hat and might not be certified. Please consult https://hardware.redhat.com for certified hardware.\n", msg);
+}
+EXPORT_SYMBOL(mark_hardware_unsupported);
+
+/**
+ * mark_hardware_deprecated() - Mark hardware, class, or type as deprecated.
+ * @msg: Hardware name, class, or type
+ *
+ * Called to minimize the support status of a previously supported device in
+ * a minor release. This does not TAINT the kernel. Marking hardware
+ * deprecated is usually done in conjunction with the hardware vendor. Future
+ * RHEL major releases may not include this driver. Driver updates and fixes
+ * for this device will be limited to critical issues in future minor releases.
+ */
+void mark_hardware_deprecated(const char *msg)
+{
+ pr_crit("Warning: %s - this hardware is not recommended for new deployments. It continues to be supported in this RHEL release, but it is likely to be removed in the next major release. Driver updates and fixes for this device will be limited to critical issues. Please contact Red Hat Support or your device's hardware vendor for additional information.\n", msg);
+}
+EXPORT_SYMBOL(mark_hardware_deprecated);
+
+/**
+ * mark_tech_preview() - Mark driver or kernel subsystem as 'Tech Preview'
+ * @msg: Driver or kernel subsystem name
+ *
+ * Called to minimize the support status of a new driver. This does TAINT the
+ * kernel. Calling this function indicates that the driver or subsystem has
+ * had limited testing and is not marked for full support within this RHEL
+ * minor release. The next RHEL minor release may contain full support for
+ * this driver. Red Hat does not guarantee that bugs reported against this
+ * driver or subsystem will be resolved.
+ */
+void mark_tech_preview(const char *msg, struct module *mod)
+{
+ const char *str = NULL;
+
+ if (msg)
+ str = msg;
+#ifdef CONFIG_MODULES
+ else if (mod && mod->name)
+ str = mod->name;
+#endif
+
+ pr_warn("TECH PREVIEW: %s may not be fully supported.\n"
+ "Please review provided documentation for limitations.\n",
+ (str ? str : "kernel"));
+ add_taint(TAINT_AUX, LOCKDEP_STILL_OK);
+#ifdef CONFIG_MODULES
+ if (mod)
+ mod->taints |= (1U << TAINT_AUX);
+#endif
+}
+EXPORT_SYMBOL(mark_tech_preview);
+
+/**
+ * mark_driver_unsupported - drivers that we know we don't want to support
+ * @name: the name of the driver
+ *
+ * In some cases Red Hat has chosen to build a driver for internal QE
+ * use. Use this function to mark those drivers as unsupported for
+ * customers.
+ */
+void mark_driver_unsupported(const char *name)
+{
+ pr_crit("Warning: %s - This driver has not undergone sufficient testing by Red Hat for this release and therefore cannot be used in production systems.\n",
+ name ? name : "kernel");
+}
+EXPORT_SYMBOL(mark_driver_unsupported);
--
2.28.0

View File

@ -1,185 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Jones <pjones@redhat.com>
Date: Mon, 2 Oct 2017 18:22:13 -0400
Subject: [PATCH] Add efi_status_to_str() and rework efi_status_to_err().
This adds efi_status_to_str() for use when printing efi_status_t
messages, and reworks efi_status_to_err() so that the two use a common
list of errors.
Upstream Status: RHEL only
Signed-off-by: Peter Jones <pjones@redhat.com>
---
drivers/firmware/efi/efi.c | 124 +++++++++++++++++++++++++++----------
include/linux/efi.h | 3 +
2 files changed, 96 insertions(+), 31 deletions(-)
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index fdd1db025dbf..8ef7d1df09dd 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -31,6 +31,7 @@
#include <linux/ucs2_string.h>
#include <linux/memblock.h>
#include <linux/security.h>
+#include <linux/bsearch.h>
#include <asm/early_ioremap.h>
@@ -831,40 +832,101 @@ int efi_mem_type(unsigned long phys_addr)
}
#endif
+struct efi_error_code {
+ efi_status_t status;
+ int errno;
+ const char *description;
+};
+
+static const struct efi_error_code efi_error_codes[] = {
+ { EFI_SUCCESS, 0, "Success"},
+#if 0
+ { EFI_LOAD_ERROR, -EPICK_AN_ERRNO, "Load Error"},
+#endif
+ { EFI_INVALID_PARAMETER, -EINVAL, "Invalid Parameter"},
+ { EFI_UNSUPPORTED, -ENOSYS, "Unsupported"},
+ { EFI_BAD_BUFFER_SIZE, -ENOSPC, "Bad Buffer Size"},
+ { EFI_BUFFER_TOO_SMALL, -ENOSPC, "Buffer Too Small"},
+ { EFI_NOT_READY, -EAGAIN, "Not Ready"},
+ { EFI_DEVICE_ERROR, -EIO, "Device Error"},
+ { EFI_WRITE_PROTECTED, -EROFS, "Write Protected"},
+ { EFI_OUT_OF_RESOURCES, -ENOMEM, "Out of Resources"},
+#if 0
+ { EFI_VOLUME_CORRUPTED, -EPICK_AN_ERRNO, "Volume Corrupt"},
+ { EFI_VOLUME_FULL, -EPICK_AN_ERRNO, "Volume Full"},
+ { EFI_NO_MEDIA, -EPICK_AN_ERRNO, "No Media"},
+ { EFI_MEDIA_CHANGED, -EPICK_AN_ERRNO, "Media changed"},
+#endif
+ { EFI_NOT_FOUND, -ENOENT, "Not Found"},
+#if 0
+ { EFI_ACCESS_DENIED, -EPICK_AN_ERRNO, "Access Denied"},
+ { EFI_NO_RESPONSE, -EPICK_AN_ERRNO, "No Response"},
+ { EFI_NO_MAPPING, -EPICK_AN_ERRNO, "No mapping"},
+ { EFI_TIMEOUT, -EPICK_AN_ERRNO, "Time out"},
+ { EFI_NOT_STARTED, -EPICK_AN_ERRNO, "Not started"},
+ { EFI_ALREADY_STARTED, -EPICK_AN_ERRNO, "Already started"},
+#endif
+ { EFI_ABORTED, -EINTR, "Aborted"},
+#if 0
+ { EFI_ICMP_ERROR, -EPICK_AN_ERRNO, "ICMP Error"},
+ { EFI_TFTP_ERROR, -EPICK_AN_ERRNO, "TFTP Error"},
+ { EFI_PROTOCOL_ERROR, -EPICK_AN_ERRNO, "Protocol Error"},
+ { EFI_INCOMPATIBLE_VERSION, -EPICK_AN_ERRNO, "Incompatible Version"},
+#endif
+ { EFI_SECURITY_VIOLATION, -EACCES, "Security Policy Violation"},
+#if 0
+ { EFI_CRC_ERROR, -EPICK_AN_ERRNO, "CRC Error"},
+ { EFI_END_OF_MEDIA, -EPICK_AN_ERRNO, "End of Media"},
+ { EFI_END_OF_FILE, -EPICK_AN_ERRNO, "End of File"},
+ { EFI_INVALID_LANGUAGE, -EPICK_AN_ERRNO, "Invalid Languages"},
+ { EFI_COMPROMISED_DATA, -EPICK_AN_ERRNO, "Compromised Data"},
+
+ // warnings
+ { EFI_WARN_UNKOWN_GLYPH, -EPICK_AN_ERRNO, "Warning Unknown Glyph"},
+ { EFI_WARN_DELETE_FAILURE, -EPICK_AN_ERRNO, "Warning Delete Failure"},
+ { EFI_WARN_WRITE_FAILURE, -EPICK_AN_ERRNO, "Warning Write Failure"},
+ { EFI_WARN_BUFFER_TOO_SMALL, -EPICK_AN_ERRNO, "Warning Buffer Too Small"},
+#endif
+};
+
+static int
+efi_status_cmp_bsearch(const void *key, const void *item)
+{
+ u64 status = (u64)(uintptr_t)key;
+ struct efi_error_code *code = (struct efi_error_code *)item;
+
+ if (status < code->status)
+ return -1;
+ if (status > code->status)
+ return 1;
+ return 0;
+}
+
int efi_status_to_err(efi_status_t status)
{
- int err;
-
- switch (status) {
- case EFI_SUCCESS:
- err = 0;
- break;
- case EFI_INVALID_PARAMETER:
- err = -EINVAL;
- break;
- case EFI_OUT_OF_RESOURCES:
- err = -ENOSPC;
- break;
- case EFI_DEVICE_ERROR:
- err = -EIO;
- break;
- case EFI_WRITE_PROTECTED:
- err = -EROFS;
- break;
- case EFI_SECURITY_VIOLATION:
- err = -EACCES;
- break;
- case EFI_NOT_FOUND:
- err = -ENOENT;
- break;
- case EFI_ABORTED:
- err = -EINTR;
- break;
- default:
- err = -EINVAL;
- }
+ struct efi_error_code *found;
+ size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);
- return err;
+ found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+ sizeof(struct efi_error_code), num,
+ efi_status_cmp_bsearch);
+ if (!found)
+ return -EINVAL;
+ return found->errno;
+}
+
+const char *
+efi_status_to_str(efi_status_t status)
+{
+ struct efi_error_code *found;
+ size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);
+
+ found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+ sizeof(struct efi_error_code), num,
+ efi_status_cmp_bsearch);
+ if (!found)
+ return "Unknown error code";
+ return found->description;
}
static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 73db1ae04cef..92aa4697f558 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -43,6 +43,8 @@
#define EFI_ABORTED (21 | (1UL << (BITS_PER_LONG-1)))
#define EFI_SECURITY_VIOLATION (26 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_IS_ERROR(x) ((x) & (1UL << (BITS_PER_LONG-1)))
+
typedef unsigned long efi_status_t;
typedef u8 efi_bool_t;
typedef u16 efi_char16_t; /* UNICODE character */
@@ -832,6 +834,7 @@ static inline bool efi_rt_services_supported(unsigned int mask)
#endif
extern int efi_status_to_err(efi_status_t status);
+extern const char *efi_status_to_str(efi_status_t status);
/*
* Variable Attributes
--
2.28.0

View File

@ -1,32 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Wed, 26 Feb 2020 13:38:40 -0500
Subject: [PATCH] Add option of 13 for FORCE_MAX_ZONEORDER
This is a hack, but it's what the other distros currently use
for aarch64 with 4K pages so we'll do the same while upstream
decides what the best outcome is (which isn't this).
Upstream Status: RHEL only
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
[Add a dependency on RHEL_DIFFERENCES]
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/arm64/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 74c5325108c0..5aa22996be8c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1133,6 +1133,7 @@ config XEN
config FORCE_MAX_ZONEORDER
int
default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
+ default "13" if (ARCH_THUNDER && !ARM64_64K_PAGES && !RHEL_DIFFERENCES)
default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE)
default "11"
help
--
2.28.0

View File

@ -1,303 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Wed, 13 Nov 2019 14:44:30 -0500
Subject: [PATCH] Add support for deprecating processors
Message-id: <20191113144431.9403-4-labbott@redhat.com>
Patchwork-id: 286081
O-Subject: [ARK INTERNAL PATCHv2 3/4] [redhat] Add support for deprecating processors
Bugzilla:
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
This is the squashed version of the following patches
modifed to use the new CONFIG_RH_DISABLE_DEPRECATED option
add rh_check_supported
Message-id: <1525313397-75200-1-git-send-email-darcari@redhat.com>
Patchwork-id: 212189
O-Subject: [RHEL8.0 BZ 1565717 v2] x86: add rh_check_supported
Bugzilla: 1565717
RH-Acked-by: Steve Best <sbest@redhat.com>
RH-Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Description:
Add code to verify that the booted x86 processor is supported by
Red Hat. In cases where the processor is not supported a critical
message is logged.
Initially the supported set of processors for RHEL8 remains the same
as RHEL7.
Bugzilla: http://bugzilla.redhat.com/1565717
Brew: https://brewweb.devel.redhat.com/taskinfo?taskID=15966242
Test: Booted brew build on supported (Haswell) and unsupported processor (CNL)
and achieved desired results.
Upstream: RHEL Only
Cc: David Arcari <darcari@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
update rh_check_supported processor list
Message-id: <1530618602-17477-1-git-send-email-darcari@redhat.com>
Patchwork-id: 223452
O-Subject: [RHEL8.0 BZ 1595918] x86: update rh_check_supported processor list
Bugzilla: 1595918
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Steve Best <sbest@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1595918
Upstream Status: RHEL_only
Build Info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16916208
Tested: Verified on a varity of supported and unsupported Intel and AMD systems.
Results as expected.
In RHEL8, we are marking some of the older processors as unsupported. No code
is being removed; however, the older processors are not supported and as such
are not candidates for certification.
Cc: David Arcari <darcari@redhat.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Steve Best <sbest@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Jakub Racek <jracek@redhat.com>
refresh: rename FAM6_ATOM again, see f2c4db1bd
mark whiskey-lake processor supported
Message-id: <1533125629-12870-1-git-send-email-darcari@redhat.com>
Patchwork-id: 225809
O-Subject: [ BZ 1609604] mark whiskey-lake processor supported
Bugzilla: 1609604
RH-Acked-by: Steve Best <sbest@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1609604
Build Info: https://brewweb.devel.redhat.com/taskinfo?taskID=17474338
Upstream Status: RHEL Only
Tested: Successful excecution of platform-test suite.
Whiskey Lake is cpu model 142 with stepping 11. Stepping > 11 for cpu model
142 is not supported.
For model 158, the highest supported stepping is 10.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
mark intel knights landing and knights mill unsupported
Message-id: <1533580277-126323-1-git-send-email-darcari@redhat.com>
Patchwork-id: 226187
O-Subject: [RHEL8.0 BZ 1610493] mark intel knights landing and knights mill unsupported
Bugzilla: 1610493
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Steve Best <sbest@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1610493
Build Info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=17625348
Tested: verified on KNL/KNM system
Upstream Status: RHEL Only
Depends: http://bugzilla.redhat.com/1609604
We are marking KNL/KNM processors as unsupported. No code is being removed;
however, the older processors are not supported and as such are not
candidates for certification.
Upstream Status: RHEL only
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
arch/x86/kernel/cpu/common.c | 1 +
arch/x86/kernel/setup.c | 132 ++++++++++++++++++++++++++++++++++-
2 files changed, 132 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c5d6f17d9b9d..9bf902c26a6e 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1253,6 +1253,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
cpu_detect(c);
get_cpu_vendor(c);
get_cpu_cap(c);
+ get_model_name(c); /* RHEL: get model name for unsupported check */
get_cpu_address_sizes(c);
setup_force_cpu_cap(X86_FEATURE_CPUID);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 3511736fbc74..112efbef3414 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -45,6 +45,7 @@
#include <asm/unwind.h>
#include <asm/vsyscall.h>
#include <linux/vmalloc.h>
+#include <asm/intel-family.h>
/*
* max_low_pfn_mapped: highest directly mapped pfn < 4 GB
@@ -754,7 +755,132 @@ static void __init trim_low_memory_range(void)
{
memblock_reserve(0, ALIGN(reserve_low, PAGE_SIZE));
}
-
+
+static bool valid_amd_processor(__u8 family, const char *model_id)
+{
+ bool valid;
+
+ switch(family) {
+ case 0x15:
+ valid = true;
+ break;
+
+ case 0x17:
+ valid = strstr(model_id, "AMD EPYC 7");
+ break;
+
+ default:
+ valid = false;
+ break;
+ }
+
+ return valid;
+}
+
+static bool valid_intel_processor(__u8 family, __u8 model, __u8 stepping)
+{
+ bool valid;
+
+ if (family != 6)
+ return false;
+
+ switch(model) {
+ case INTEL_FAM6_ATOM_GOLDMONT_D:
+ case INTEL_FAM6_ATOM_GOLDMONT_PLUS:
+
+ case INTEL_FAM6_BROADWELL:
+ case INTEL_FAM6_BROADWELL_G:
+ case INTEL_FAM6_BROADWELL_X:
+ case INTEL_FAM6_BROADWELL_D:
+
+ case INTEL_FAM6_HASWELL:
+ case INTEL_FAM6_HASWELL_G:
+ case INTEL_FAM6_HASWELL_L:
+ case INTEL_FAM6_HASWELL_X:
+ valid = true;
+ break;
+
+ case INTEL_FAM6_KABYLAKE:
+ valid = (stepping <= 10);
+ break;
+
+ case INTEL_FAM6_KABYLAKE_L:
+ valid = (stepping <= 11);
+ break;
+
+ case INTEL_FAM6_SKYLAKE_L:
+ case INTEL_FAM6_SKYLAKE:
+ case INTEL_FAM6_SKYLAKE_X:
+ /* stepping > 4 is Cascade Lake and is not supported */
+ valid = (stepping <= 4);
+ break;
+
+ default:
+ valid = false;
+ break;
+ }
+
+ return valid;
+}
+
+static void rh_check_supported(void)
+{
+ bool guest;
+
+ guest = (x86_hyper_type != X86_HYPER_NATIVE || boot_cpu_has(X86_FEATURE_HYPERVISOR));
+
+ /* RHEL supports single cpu on guests only */
+ if (((boot_cpu_data.x86_max_cores * smp_num_siblings) == 1) &&
+ !guest && is_kdump_kernel()) {
+ pr_crit("Detected single cpu native boot.\n");
+ pr_crit("Important: In this kernel, single threaded, single CPU 64-bit physical systems are unsupported.");
+ }
+
+ /*
+ * If the RHEL kernel does not support this hardware, the kernel will
+ * attempt to boot, but no support is provided for this hardware
+ */
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (!valid_amd_processor(boot_cpu_data.x86,
+ boot_cpu_data.x86_model_id)) {
+ pr_crit("Detected CPU family %xh model %d\n",
+ boot_cpu_data.x86,
+ boot_cpu_data.x86_model);
+ mark_hardware_unsupported("AMD Processor");
+ }
+ break;
+
+ case X86_VENDOR_INTEL:
+ if (!valid_intel_processor(boot_cpu_data.x86,
+ boot_cpu_data.x86_model,
+ boot_cpu_data.x86_stepping)) {
+ pr_crit("Detected CPU family %d model %d stepping %d\n",
+ boot_cpu_data.x86,
+ boot_cpu_data.x86_model,
+ boot_cpu_data.x86_stepping);
+ mark_hardware_unsupported("Intel Processor");
+ }
+ break;
+
+ default:
+ pr_crit("Detected processor %s %s\n",
+ boot_cpu_data.x86_vendor_id,
+ boot_cpu_data.x86_model_id);
+ mark_hardware_unsupported("Processor");
+ break;
+ }
+
+ /*
+ * Due to the complexity of x86 lapic & ioapic enumeration, and PCI IRQ
+ * routing, ACPI is required for x86. acpi=off is a valid debug kernel
+ * parameter, so just print out a loud warning in case something
+ * goes wrong (which is most of the time).
+ */
+ if (acpi_disabled && !guest)
+ pr_crit("ACPI has been disabled or is not available on this hardware. This may result in a single cpu boot, incorrect PCI IRQ routing, or boot failure.\n");
+}
+
/*
* Dump out kernel offset information on panic.
*/
@@ -1249,6 +1375,10 @@ void __init setup_arch(char **cmdline_p)
efi_apply_memmap_quirks();
#endif
+#ifdef CONFIG_RH_DISABLE_DEPRECATED
+ rh_check_supported();
+#endif
+
unwind_init();
}
--
2.28.0

View File

@ -1,25 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Wed, 23 Jan 2019 14:36:37 +0100
Subject: [PATCH] Drop that for now
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index b70997f7ddf9..680d906eee35 100644
--- a/Makefile
+++ b/Makefile
@@ -498,7 +498,7 @@ KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE
KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
-Werror=implicit-function-declaration -Werror=implicit-int \
- -Wno-format-security \
+ -Wno-format-security -Wno-address-of-packed-member \
-std=gnu89
KBUILD_CPPFLAGS := -D__KERNEL__
KBUILD_AFLAGS_KERNEL :=
--
2.28.0

View File

@ -1,34 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: "Justin M. Forbes" <jforbes@fedoraproject.org>
Date: Thu, 10 Sep 2020 16:39:54 -0500
Subject: [PATCH] Filter out LTO build options from the perl ccopts
Kernel tools currently does not build with LTO options enabled. We can
turn off the option in most places through the spec file, but for the
perl bindings, it auto detects what perl was built with and uses those.
This patch will filter out the lto options allowing kernel-tools
packages to build correctly. I expect this patch to go away when the
LTO issues are worked out upstream.
Upstream Status: Red Hat only
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
---
tools/perf/Makefile.config | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 190be4fa5c21..28beab03575a 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -748,6 +748,7 @@ else
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null)
PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS))
+ PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(PERL_EMBED_CCOPTS))
PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS))
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
--
2.28.0

View File

@ -1,36 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Fri, 10 Jul 2020 16:18:59 +0100
Subject: [PATCH] Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL
only
The ACPI prefernce is RHEL specific, in Fedora we use upstream defaults so
it doesn't randomly change the expectations as to how certain hardware works
that generally isn't classed as "enterprise". So wrap it in the special RHEL
check as it should be for the ARK kernels.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
CC: Mark Salter <msalter@redhat.com>
---
arch/arm64/kernel/acpi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 5cb0d548ec25..999f0a232e57 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -40,7 +40,11 @@ int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */
EXPORT_SYMBOL(acpi_pci_disabled);
static bool param_acpi_off __initdata;
+#ifdef CONFIG_RHEL_DIFFERENCES
static bool param_acpi_on __initdata = true;
+#else
+static bool param_acpi_on __initdata;
+#endif
static bool param_acpi_force __initdata;
static int __init parse_acpi(char *arg)
--
2.28.0

View File

@ -1,58 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Don Dutile <ddutile@redhat.com>
Date: Tue, 24 Jul 2018 22:29:16 -0400
Subject: [PATCH] IB/rxe: Mark Soft-RoCE Transport driver as tech-preview
Message-id: <20180724222916.19362-1-ddutile@redhat.com>
Patchwork-id: 225418
O-Subject: [PATCH RHEL-8.0] IB/rxe: Mark Soft-RoCE Transport driver as tech-preview.
Bugzilla: 1605216
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Jonathan Toppins <jtoppins@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Honggang Li <honli@redhat.com>
The Soft-RoCE driver implements the InfiniBand RDMA transport
over the Linux network stack. It enables a system with a
standard Ethernet adapter to interoperate with a RoCE
adapter or with another system running the RXE driver.
Unfortunately, a wide range of tests and/or use-cases have shown
that the driver is not ready for enterprise use, and upstream bug
fixing may not be complete for RHEL-8.0.
Thus, recommendation from driver maintainer is to mark it as
tech-preview. It is expected that future bug fixes will enable it
to be upgraded to fully supported. In the mean time, it works
in a number of use cases, and can be used to demonstrate upstream
fixes on failing cases.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1605216
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=17344161
Testing:
Simple boot test, and loading of rxe driver to show tech-preview
msg is generated in dmesg log.
Upstream Status: RHEL only
Signed-off-by: Donald Dutile <ddutile@redhat.com
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/infiniband/sw/rxe/rxe.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index 907203afbd99..6fbbe2b109d1 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -303,6 +303,8 @@ static int __init rxe_module_init(void)
{
int err;
+ mark_tech_preview("Soft-RoCE Transport Driver", THIS_MODULE);
+
/* initialize slab caches for managed objects */
err = rxe_cache_init();
if (err) {
--
2.28.0

View File

@ -1,330 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Date: Mon, 3 Apr 2017 18:18:21 +0200
Subject: [PATCH] Input: rmi4 - remove the need for artificial IRQ in case of
HID
The IRQ from rmi4 may interfere with the one we currently use on i2c-hid.
Given that there is already a need for an external API from rmi4 to
forward the attention data, we can, in this particular case rely on a
separate workqueue to prevent cursor jumps.
Reported-by: Cameron Gutman <aicommander@gmail.com>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Lyude <lyude@redhat.com>
---
drivers/hid/hid-rmi.c | 64 -----------------
drivers/input/rmi4/rmi_driver.c | 124 +++++++++++++++++++-------------
include/linux/rmi.h | 1 +
3 files changed, 75 insertions(+), 114 deletions(-)
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 8cffa84c9650..6c4e3675601a 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -322,19 +322,12 @@ static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
struct rmi_device *rmi_dev = hdata->xport.rmi_dev;
- unsigned long flags;
if (!(test_bit(RMI_STARTED, &hdata->flags)))
return 0;
- local_irq_save(flags);
-
rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2);
- generic_handle_irq(hdata->rmi_irq);
-
- local_irq_restore(flags);
-
return 1;
}
@@ -592,56 +585,6 @@ static const struct rmi_transport_ops hid_rmi_ops = {
.reset = rmi_hid_reset,
};
-static void rmi_irq_teardown(void *data)
-{
- struct rmi_data *hdata = data;
- struct irq_domain *domain = hdata->domain;
-
- if (!domain)
- return;
-
- irq_dispose_mapping(irq_find_mapping(domain, 0));
-
- irq_domain_remove(domain);
- hdata->domain = NULL;
- hdata->rmi_irq = 0;
-}
-
-static int rmi_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw_irq_num)
-{
- irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops rmi_irq_ops = {
- .map = rmi_irq_map,
-};
-
-static int rmi_setup_irq_domain(struct hid_device *hdev)
-{
- struct rmi_data *hdata = hid_get_drvdata(hdev);
- int ret;
-
- hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1,
- &rmi_irq_ops, hdata);
- if (!hdata->domain)
- return -ENOMEM;
-
- ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata);
- if (ret)
- return ret;
-
- hdata->rmi_irq = irq_create_mapping(hdata->domain, 0);
- if (hdata->rmi_irq <= 0) {
- hid_err(hdev, "Can't allocate an IRQ\n");
- return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO;
- }
-
- return 0;
-}
-
static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct rmi_data *data = NULL;
@@ -714,18 +657,11 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
mutex_init(&data->page_mutex);
- ret = rmi_setup_irq_domain(hdev);
- if (ret) {
- hid_err(hdev, "failed to allocate IRQ domain\n");
- return ret;
- }
-
if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
rmi_hid_pdata.f30_data.disable = true;
data->xport.dev = hdev->dev.parent;
data->xport.pdata = rmi_hid_pdata;
- data->xport.pdata.irq = data->rmi_irq;
data->xport.proto_name = "hid";
data->xport.ops = &hid_rmi_ops;
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 258d5fe3d395..f7298e3dc8f3 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -182,34 +182,47 @@ void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
attn_data.data = fifo_data;
kfifo_put(&drvdata->attn_fifo, attn_data);
+
+ schedule_work(&drvdata->attn_work);
}
EXPORT_SYMBOL_GPL(rmi_set_attn_data);
-static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+static void attn_callback(struct work_struct *work)
{
- struct rmi_device *rmi_dev = dev_id;
- struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_driver_data *drvdata = container_of(work,
+ struct rmi_driver_data,
+ attn_work);
struct rmi4_attn_data attn_data = {0};
int ret, count;
count = kfifo_get(&drvdata->attn_fifo, &attn_data);
- if (count) {
- *(drvdata->irq_status) = attn_data.irq_status;
- drvdata->attn_data = attn_data;
- }
+ if (!count)
+ return;
- ret = rmi_process_interrupt_requests(rmi_dev);
+ *(drvdata->irq_status) = attn_data.irq_status;
+ drvdata->attn_data = attn_data;
+
+ ret = rmi_process_interrupt_requests(drvdata->rmi_dev);
if (ret)
- rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+ rmi_dbg(RMI_DEBUG_CORE, &drvdata->rmi_dev->dev,
"Failed to process interrupt request: %d\n", ret);
- if (count) {
- kfree(attn_data.data);
- drvdata->attn_data.data = NULL;
- }
+ kfree(attn_data.data);
+ drvdata->attn_data.data = NULL;
if (!kfifo_is_empty(&drvdata->attn_fifo))
- return rmi_irq_fn(irq, dev_id);
+ schedule_work(&drvdata->attn_work);
+}
+
+static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+{
+ struct rmi_device *rmi_dev = dev_id;
+ int ret;
+
+ ret = rmi_process_interrupt_requests(rmi_dev);
+ if (ret)
+ rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+ "Failed to process interrupt request: %d\n", ret);
return IRQ_HANDLED;
}
@@ -217,7 +230,6 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
static int rmi_irq_init(struct rmi_device *rmi_dev)
{
struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
- struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
int irq_flags = irq_get_trigger_type(pdata->irq);
int ret;
@@ -235,8 +247,6 @@ static int rmi_irq_init(struct rmi_device *rmi_dev)
return ret;
}
- data->enabled = true;
-
return 0;
}
@@ -886,23 +896,27 @@ void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
if (data->enabled)
goto out;
- enable_irq(irq);
- data->enabled = true;
- if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
- retval = disable_irq_wake(irq);
- if (retval)
- dev_warn(&rmi_dev->dev,
- "Failed to disable irq for wake: %d\n",
- retval);
- }
+ if (irq) {
+ enable_irq(irq);
+ data->enabled = true;
+ if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+ retval = disable_irq_wake(irq);
+ if (retval)
+ dev_warn(&rmi_dev->dev,
+ "Failed to disable irq for wake: %d\n",
+ retval);
+ }
- /*
- * Call rmi_process_interrupt_requests() after enabling irq,
- * otherwise we may lose interrupt on edge-triggered systems.
- */
- irq_flags = irq_get_trigger_type(pdata->irq);
- if (irq_flags & IRQ_TYPE_EDGE_BOTH)
- rmi_process_interrupt_requests(rmi_dev);
+ /*
+ * Call rmi_process_interrupt_requests() after enabling irq,
+ * otherwise we may lose interrupt on edge-triggered systems.
+ */
+ irq_flags = irq_get_trigger_type(pdata->irq);
+ if (irq_flags & IRQ_TYPE_EDGE_BOTH)
+ rmi_process_interrupt_requests(rmi_dev);
+ } else {
+ data->enabled = true;
+ }
out:
mutex_unlock(&data->enabled_mutex);
@@ -922,20 +936,22 @@ void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
goto out;
data->enabled = false;
- disable_irq(irq);
- if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
- retval = enable_irq_wake(irq);
- if (retval)
- dev_warn(&rmi_dev->dev,
- "Failed to enable irq for wake: %d\n",
- retval);
- }
-
- /* make sure the fifo is clean */
- while (!kfifo_is_empty(&data->attn_fifo)) {
- count = kfifo_get(&data->attn_fifo, &attn_data);
- if (count)
- kfree(attn_data.data);
+ if (irq) {
+ disable_irq(irq);
+ if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+ retval = enable_irq_wake(irq);
+ if (retval)
+ dev_warn(&rmi_dev->dev,
+ "Failed to enable irq for wake: %d\n",
+ retval);
+ }
+ } else {
+ /* make sure the fifo is clean */
+ while (!kfifo_is_empty(&data->attn_fifo)) {
+ count = kfifo_get(&data->attn_fifo, &attn_data);
+ if (count)
+ kfree(attn_data.data);
+ }
}
out:
@@ -981,6 +997,8 @@ static int rmi_driver_remove(struct device *dev)
irq_domain_remove(data->irqdomain);
data->irqdomain = NULL;
+ cancel_work_sync(&data->attn_work);
+
rmi_f34_remove_sysfs(rmi_dev);
rmi_free_function_list(rmi_dev);
@@ -1219,9 +1237,15 @@ static int rmi_driver_probe(struct device *dev)
}
}
- retval = rmi_irq_init(rmi_dev);
- if (retval < 0)
- goto err_destroy_functions;
+ if (pdata->irq) {
+ retval = rmi_irq_init(rmi_dev);
+ if (retval < 0)
+ goto err_destroy_functions;
+ }
+
+ data->enabled = true;
+
+ INIT_WORK(&data->attn_work, attn_callback);
if (data->f01_container->dev.driver) {
/* Driver already bound, so enable ATTN now. */
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index 8ed37f93f3c8..d7ad35a15acb 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -363,6 +363,7 @@ struct rmi_driver_data {
struct rmi4_attn_data attn_data;
DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
+ struct work_struct attn_work;
};
int rmi_register_transport_device(struct rmi_transport_dev *xport);
--
2.28.0

View File

@ -1,64 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Wed, 13 Nov 2019 14:44:28 -0500
Subject: [PATCH] Introduce CONFIG_RH_DISABLE_DEPRECATED
Message-id: <20191113144431.9403-2-labbott@redhat.com>
Patchwork-id: 286080
O-Subject: [ARK INTERNAL PATCHv2 1/4] [redhat] Introduce CONFIG_RH_DISABLE_DEPRECATED
Bugzilla:
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
For many drivers that RHEL doesn't want to support, we've typically deleted
PCI ids from the tree. This precludes those drivers from being used at all
which is fine for RHEL but a problem if we want to use a similar source base
for Fedora. Instead of just deleting IDs, introduce a config
CONFIG_RH_DISABLE_DEPRECATED. This way RHEL can remove IDs while still allowing
kernels to be built with the option off from the same source.
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
Kconfig | 2 ++
Kconfig.redhat | 17 +++++++++++++++++
2 files changed, 19 insertions(+)
create mode 100644 Kconfig.redhat
diff --git a/Kconfig b/Kconfig
index 745bc773f567..f57ff40109d7 100644
--- a/Kconfig
+++ b/Kconfig
@@ -30,3 +30,5 @@ source "lib/Kconfig"
source "lib/Kconfig.debug"
source "Documentation/Kconfig"
+
+source "Kconfig.redhat"
diff --git a/Kconfig.redhat b/Kconfig.redhat
new file mode 100644
index 000000000000..733a26bd887a
--- /dev/null
+++ b/Kconfig.redhat
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Red Hat specific options
+#
+
+menu "Red Hat options"
+
+config RH_DISABLE_DEPRECATED
+ bool "Remove support for deprecated features"
+ help
+ Red Hat may choose to deprecate certain features in its kernels.
+ Enable this option to remove support for hardware that is no
+ longer supported.
+
+ Unless you want a restricted kernel, say N here.
+
+endmenu
--
2.28.0

View File

@ -1,44 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Robert Holmes <robeholmes@gmail.com>
Date: Tue, 23 Apr 2019 07:39:29 +0000
Subject: [PATCH] KEYS: Make use of platform keyring for module signature
verify
This patch completes commit 278311e417be ("kexec, KEYS: Make use of
platform keyring for signature verify") which, while adding the
platform keyring for bzImage verification, neglected to also add
this keyring for module verification.
As such, kernel modules signed with keys from the MokList variable
were not successfully verified.
Signed-off-by: Robert Holmes <robeholmes@gmail.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
kernel/module_signing.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/kernel/module_signing.c b/kernel/module_signing.c
index 9d9fc678c91d..84ad75a53c83 100644
--- a/kernel/module_signing.c
+++ b/kernel/module_signing.c
@@ -38,8 +38,15 @@ int mod_verify_sig(const void *mod, struct load_info *info)
modlen -= sig_len + sizeof(ms);
info->len = modlen;
- return verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+ ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
VERIFY_USE_SECONDARY_KEYRING,
VERIFYING_MODULE_SIGNATURE,
NULL, NULL);
+ if (ret == -ENOKEY && IS_ENABLED(CONFIG_INTEGRITY_PLATFORM_KEYRING)) {
+ ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+ VERIFY_USE_PLATFORM_KEYRING,
+ VERIFYING_MODULE_SIGNATURE,
+ NULL, NULL);
+ }
+ return ret;
}
--
2.28.0

View File

@ -1,40 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Jones <pjones@redhat.com>
Date: Mon, 2 Oct 2017 18:18:30 -0400
Subject: [PATCH] Make get_cert_list() use efi_status_to_str() to print error
messages.
Upstream Status: RHEL only
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
security/integrity/platform_certs/load_uefi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/security/integrity/platform_certs/load_uefi.c b/security/integrity/platform_certs/load_uefi.c
index 253fb9a7fc98..8c95b68d86d4 100644
--- a/security/integrity/platform_certs/load_uefi.c
+++ b/security/integrity/platform_certs/load_uefi.c
@@ -46,7 +46,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
return NULL;
if (*status != EFI_BUFFER_TOO_SMALL) {
- pr_err("Couldn't get size: 0x%lx\n", *status);
+ pr_err("Couldn't get size: %s (0x%lx)\n",
+ efi_status_to_str(*status), *status);
return NULL;
}
@@ -57,7 +58,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
*status = efi.get_variable(name, guid, NULL, &lsize, db);
if (*status != EFI_SUCCESS) {
kfree(db);
- pr_err("Error reading db var: 0x%lx\n", *status);
+ pr_err("Error reading db var: %s (0x%lx)\n",
+ efi_status_to_str(*status), *status);
return NULL;
}
--
2.28.0

View File

@ -1,43 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Tue, 17 Sep 2019 17:11:03 +0000
Subject: [PATCH] Pull the RHEL version defines out of the Makefile
This is done via the kernel-put-RHEL-info-into-generated-headers.patch
in the rhpatches branch.
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
Makefile | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/Makefile b/Makefile
index 48a7abae02d2..2d826a14824a 100644
--- a/Makefile
+++ b/Makefile
@@ -16,6 +16,7 @@ PHONY := _all
_all:
# Set RHEL variables
+# Use this spot to avoid future merge conflicts
include Makefile.rhelver
# We are using a recursive build, so we need to do a little thinking
@@ -1172,13 +1173,7 @@ endef
define filechk_version.h
echo \#define LINUX_VERSION_CODE $(shell \
expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
- echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
- echo '#define RHEL_MAJOR $(RHEL_MAJOR)'; \
- echo '#define RHEL_MINOR $(RHEL_MINOR)'; \
- echo '#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b))'; \
- echo '#define RHEL_RELEASE_CODE \
- $(shell expr $(RHEL_MAJOR) \* 256 + $(RHEL_MINOR))'; \
- echo '#define RHEL_RELEASE "$(RHEL_RELEASE)"'
+ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
endef
$(version_h): FORCE
--
2.28.0

View File

@ -1,113 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Dick Kennedy <dkennedy@redhat.com>
Date: Fri, 14 Feb 2020 15:09:41 -0500
Subject: [PATCH] Removing Obsolete hba pci-ids from rhel8
Message-id: <1525206184-20470-1-git-send-email-dkennedy@redhat.com>
Patchwork-id: 212089
O-Subject: [RHEL8 PATCH e-stor] Removing Obsolete hba pci-ids from rhel8.
Bugzilla: 1572321
RH-Acked-by: Chris Leech <cleech@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
These adapters printed an Obsolete Unsupported message is rhel7. They
are being removed for rhel8
brew-id: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID^U948800
bugzilla: 1572321
tested on: rhel-storage-44 and on rhel-storage-07
RHEL Specific
Upstream Status: RHEL only
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Backport Notes: Simplify by filtering using pci_ids
-
---
drivers/scsi/lpfc/lpfc_ids.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_ids.h b/drivers/scsi/lpfc/lpfc_ids.h
index d48414e295a0..ba0e384412c9 100644
--- a/drivers/scsi/lpfc/lpfc_ids.h
+++ b/drivers/scsi/lpfc/lpfc_ids.h
@@ -24,6 +24,7 @@
#include <linux/pci.h>
const struct pci_device_id lpfc_id_table[] = {
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
@@ -54,14 +55,19 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
+#endif
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID,
PCI_ANY_ID, PCI_ANY_ID, },
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB,
PCI_ANY_ID, PCI_ANY_ID, },
+#endif
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR,
PCI_ANY_ID, PCI_ANY_ID, },
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HORNET,
PCI_ANY_ID, PCI_ANY_ID, },
+#endif
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP,
@@ -70,6 +76,7 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB,
PCI_ANY_ID, PCI_ANY_ID, },
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101,
@@ -80,6 +87,7 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S,
PCI_ANY_ID, PCI_ANY_ID, },
+#endif
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_MID,
@@ -92,6 +100,7 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S,
PCI_ANY_ID, PCI_ANY_ID, },
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_VF,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_PF,
@@ -102,18 +111,23 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TOMCAT,
PCI_ANY_ID, PCI_ANY_ID, },
+#endif
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FALCON,
PCI_ANY_ID, PCI_ANY_ID, },
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BALIUS,
PCI_ANY_ID, PCI_ANY_ID, },
+#endif
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC,
PCI_ANY_ID, PCI_ANY_ID, },
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC_VF,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE_VF,
PCI_ANY_ID, PCI_ANY_ID, },
+#endif
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G6_FC,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G7_FC,
--
2.28.0

View File

@ -1,80 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Don Zickus <dzickus@redhat.com>
Date: Tue, 3 Mar 2020 09:35:28 -0500
Subject: [PATCH] Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES
The intent of RH_DISABLE_DEPRECATED was to provide Red Hat a
simple way to disable drivers it did not want to support in RHEL.
As the config option was applied to more drivers and infra, it became
clear the option was being used for not only deprecating drivers (which
implied limited support) to disabling drivers (implying no support).
Using the word 'deprecated' seemed confusing in the second scenario.
Rename the option to be more generic and useable across more parts
of the kernel tree.
The new wording is RHEL_DIFFERENCES.
Upstream Status: RHEL only
---
Kconfig.redhat | 2 +-
arch/x86/kernel/setup.c | 2 +-
include/linux/kernel.h | 2 +-
kernel/Makefile | 1 +
4 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/Kconfig.redhat b/Kconfig.redhat
index 733a26bd887a..effb81d04bfd 100644
--- a/Kconfig.redhat
+++ b/Kconfig.redhat
@@ -5,7 +5,7 @@
menu "Red Hat options"
-config RH_DISABLE_DEPRECATED
+config RHEL_DIFFERENCES
bool "Remove support for deprecated features"
help
Red Hat may choose to deprecate certain features in its kernels.
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index a1a012702915..b57e6dd6d7ef 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1371,7 +1371,7 @@ void __init setup_arch(char **cmdline_p)
efi_apply_memmap_quirks();
#endif
-#ifdef CONFIG_RH_DISABLE_DEPRECATED
+#ifdef CONFIG_RHEL_DIFFERENCES
rh_check_supported();
#endif
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f24819663517..3ab563aa9e64 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -1059,7 +1059,7 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
struct module;
-#ifdef CONFIG_RH_DISABLE_DEPRECATED
+#ifdef CONFIG_RHEL_DIFFERENCES
void mark_hardware_unsupported(const char *msg);
void mark_hardware_deprecated(const char *msg);
void mark_tech_preview(const char *msg, struct module *mod);
diff --git a/kernel/Makefile b/kernel/Makefile
index d744b63c07dc..1916714ba4b6 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -14,6 +14,7 @@ obj-y = fork.o exec_domain.o panic.o \
obj-$(CONFIG_BPFILTER) += usermode_driver.o
obj-$(CONFIG_RH_DISABLE_DEPRECATED) += rh_taint.o
+obj-$(CONFIG_RHEL_DIFFERENCES) += rh_taint.o
obj-$(CONFIG_MODULES) += kmod.o
obj-$(CONFIG_MULTIUSER) += groups.o
--
2.28.0

View File

@ -1,29 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: "Justin M. Forbes" <jforbes@fedoraproject.org>
Date: Mon, 10 Aug 2020 08:06:05 -0500
Subject: [PATCH] Temporarily remove cdomain from sphinx documentation
The documentation subpackage will not build currently.
https://github.com/sphinx-doc/sphinx/issues/7421
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
---
Documentation/conf.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/conf.py b/Documentation/conf.py
index c503188880d9..b5b2be8eec22 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -36,7 +36,7 @@ needs_sphinx = '1.3'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
-extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain',
+extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
'maintainers_include', 'sphinx.ext.autosectionlabel' ]
--
2.28.0

View File

@ -1,75 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Robert Richter <rrichter@redhat.com>
Date: Thu, 7 Jun 2018 22:59:32 -0400
Subject: [PATCH] Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
Message-id: <1528412373-19128-2-git-send-email-rrichter@redhat.com>
Patchwork-id: 220950
O-Subject: [RHEL-8.0 BZ 1563590 v2 1/2] PCI: Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
Bugzilla: 1563590
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
From: Ashok Kumar Sekar <asekar@redhat.com>
PCI BAR 5 is not setup correctly for the on-board AHCI
controller on Broadcom's Vulcan processor. Added a quirk to fix BAR 5
by using BAR 4's resources which are populated correctly but NOT used
by the AHCI controller actually.
RHEL-only:
Both patches are in RHEL-7.6 also. Inclusion of the patches into RHEL-8
was discussed. Since there are partners with Ax system configurations it
was decided to carry them in RHEL8 too. See:
https://bugzilla.redhat.com/show_bug.cgi?id=1563590#c1
Upstream Status: RHEL only
Signed-off-by: Ashok Kumar Sekar <asekar@redhat.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Robert Richter <rrichter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/pci/quirks.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bdf9b52567e0..1e98e20b7cc2 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4196,6 +4196,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
quirk_bridge_cavm_thrx2_pcie_root);
+/*
+ * PCI BAR 5 is not setup correctly for the on-board AHCI controller
+ * on Broadcom's Vulcan processor. Added a quirk to fix BAR 5 by
+ * using BAR 4's resources which are populated correctly and NOT
+ * actually used by the AHCI controller.
+ */
+static void quirk_fix_vulcan_ahci_bars(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[4];
+
+ if (!(r->flags & IORESOURCE_MEM) || (r->start == 0))
+ return;
+
+ /* Set BAR5 resource to BAR4 */
+ dev->resource[5] = *r;
+
+ /* Update BAR5 in pci config space */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_5, r->start);
+
+ /* Clear BAR4's resource */
+ memset(r, 0, sizeof(*r));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9027, quirk_fix_vulcan_ahci_bars);
+
/*
* Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
* class code. Fix it.
--
2.28.0

View File

@ -1,29 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: "Justin M. Forbes" <jforbes@fedoraproject.org>
Date: Thu, 30 Jul 2020 10:26:11 -0500
Subject: [PATCH] Work around for gcc bug
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96377
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
---
crypto/aegis128-neon-inner.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/crypto/aegis128-neon-inner.c b/crypto/aegis128-neon-inner.c
index 2a660ac1bc3a..fa87ff6a2a71 100644
--- a/crypto/aegis128-neon-inner.c
+++ b/crypto/aegis128-neon-inner.c
@@ -148,8 +148,8 @@ void crypto_aegis128_init_neon(void *state, const void *key, const void *iv)
kiv,
vld1q_u8(const1),
vld1q_u8(const0),
- k ^ vld1q_u8(const0),
- k ^ vld1q_u8(const1),
+ (uint8x16_t) (k ^ vld1q_u8(const0)),
+ (uint8x16_t) (k ^ vld1q_u8(const1)),
}};
int i;
--
2.28.0

View File

@ -1,51 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Raghava Aditya Renukunta <rrenukun@redhat.com>
Date: Thu, 2 Jan 2020 14:24:38 -0500
Subject: [PATCH] aacraid: Remove depreciated device and vendor PCI id's
Message-id: <20180315040041.9449.8525.stgit@dhcp187-32.khw.lab.eng.bos.redhat.com>
Patchwork-id: 206793
O-Subject: [RHEL8 e-stor PATCH] scsi: aacraid: Remove depreciated device and vendor PCI id's
Bugzilla: 1495307
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id95307
Brew Info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID552286
Upstream Status: N/A (RHEL 8 internal)
Tested: Code Review
Remove Vendor PCI ID and Device PCI ID of depreciated devices from
aacraid pci table, preventing these device from attaching to the aacraid
driver.
Upstream Status: RHEL only
Signed-off-by: Raghava Aditya Renukunta <rrenukun@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/scsi/aacraid/linit.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 8588da0a0655..2bc9157fb5d3 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -78,6 +78,7 @@ char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
* Note: The last field is used to index into aac_drivers below.
*/
static const struct pci_device_id aac_pci_tbl[] = {
+#ifndef CONFIG_RHEL_DIFFERENCES
{ 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */
{ 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */
{ 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */
@@ -145,6 +146,7 @@ static const struct pci_device_id aac_pci_tbl[] = {
{ 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 59 }, /* Adaptec Catch All */
{ 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 60 }, /* Adaptec Rocket Catch All */
{ 0x9005, 0x0288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 61 }, /* Adaptec NEMER/ARK Catch All */
+#endif
{ 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Series 6 (Tupelo) */
{ 0x9005, 0x028c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 63 }, /* Adaptec PMC Series 7 (Denali) */
{ 0x9005, 0x028d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 64 }, /* Adaptec PMC Series 8 */
--
2.28.0

View File

@ -1,52 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 10 May 2018 17:38:44 -0400
Subject: [PATCH] aarch64: acpi scan: Fix regression related to X-Gene UARTs
Message-id: <20180510173844.29580-4-msalter@redhat.com>
Patchwork-id: 214381
O-Subject: [RHEL-8 BZ1519554 3/3] aarch64: acpi scan: Fix regression related to X-Gene UARTs
Bugzilla: 1519554
RH-Acked-by: Al Stone <astone@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1519554
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16144520
Commit e361d1f85855 ("ACPI / scan: Fix enumeration for special UART
devices") caused a regression with some X-Gene based platforms (Mustang
and M400) with invalid DSDT. The DSDT makes it appear that the UART
device is also a slave device attached to itself. With the above commit
the UART won't be enumerated by ACPI scan (slave serial devices shouldn't
be). So check for X-Gene UART device and skip slace device check on it.
Upstream Status: RHEL only
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/acpi/scan.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 2142f1554761..f5fdf6f3650c 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1574,6 +1574,15 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
if (!acpi_match_device_ids(device, i2c_multi_instantiate_ids))
return false;
+ /*
+ * Firmware on some arm64 X-Gene platforms will make the UART
+ * device appear as both a UART and a slave of that UART. Just
+ * bail out here for X-Gene UARTs.
+ */
+ if (IS_ENABLED(CONFIG_ARM64) &&
+ !strcmp(acpi_device_hid(device), "APMC0D08"))
+ return false;
+
INIT_LIST_HEAD(&resource_list);
acpi_dev_get_resources(device, &resource_list,
acpi_check_serial_bus_slave,
--
2.28.0

View File

@ -1,56 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Fri, 11 May 2018 21:01:17 -0400
Subject: [PATCH] acpi: prefer booting with ACPI over DTS
Message-id: <20180511210117.10457-1-msalter@redhat.com>
Patchwork-id: 214708
O-Subject: [RHEL-8 BZ1576869] [RHEL only] acpi: prefer booting with ACPI over DTS
Bugzilla: 1576869
RH-Acked-by: Jonathan Toppins <jtoppins@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1576869
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16208479
Testing: Verified kernel defaults to ACPI on Mustang
From: Jonathan Toppins <jtoppins@redhat.com>
This patch forces ACPI boot tables to be preferred over DTS.
Currently for ACPI to be used a user either has to set acpi=on on the
kernel command line or make sure any device tree passed to the kernel
is empty. If the dtb passed to the kernel is non-empty then device-tree
will be chosen as the boot method of choice.
RHEL does not wish to support this boot method so change table boot
preferences to use ACPI. In the event ACPI table checks fail the kernel
will fallback to using DTS to boot.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
arch/arm64/kernel/acpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 455966401102..5cb0d548ec25 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -40,7 +40,7 @@ int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */
EXPORT_SYMBOL(acpi_pci_disabled);
static bool param_acpi_off __initdata;
-static bool param_acpi_on __initdata;
+static bool param_acpi_on __initdata = true;
static bool param_acpi_force __initdata;
static int __init parse_acpi(char *arg)
--
2.28.0

View File

@ -1,83 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Eugene Syromiatnikov <esyr@redhat.com>
Date: Thu, 14 Jun 2018 16:35:59 -0400
Subject: [PATCH] add Red Hat-specific taint flags
Message-id: <56f71e5f8cf63afd0cdb1c4550c625cc90d59a75.1528991395.git.esyr@redhat.com>
Patchwork-id: 8249
O-Subject: [kernel team] [RHEL8 PATCH v4 1/5] kernel: add Red Hat-specific taint flags
Bugzilla: 1559877
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
RH-Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Based on RHEL 7 commit "Backport RH specific TAINT flags" by Prarit
Bhargava.
Upstream Status: RHEL only
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1559877
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16716594
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
include/linux/kernel.h | 19 ++++++++++++++++++-
kernel/panic.c | 14 ++++++++++++++
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 19291af895eb..ae2859863d59 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -604,7 +604,24 @@ extern enum system_states {
#define TAINT_LIVEPATCH 15
#define TAINT_AUX 16
#define TAINT_RANDSTRUCT 17
-#define TAINT_FLAGS_COUNT 18
+/* Start of Red Hat-specific taint flags */
+#define TAINT_18 18
+#define TAINT_19 19
+#define TAINT_20 20
+#define TAINT_21 21
+#define TAINT_22 22
+#define TAINT_23 23
+#define TAINT_24 24
+#define TAINT_25 25
+#define TAINT_26 26
+#define TAINT_27 27
+/* Bits 28 - 31 are reserved for Red Hat use only */
+#define TAINT_RESERVED28 28
+#define TAINT_RESERVED29 29
+#define TAINT_RESERVED30 30
+#define TAINT_RESERVED31 31
+/* End of Red Hat-specific taint flags */
+#define TAINT_FLAGS_COUNT 32
#define TAINT_FLAGS_MAX ((1UL << TAINT_FLAGS_COUNT) - 1)
struct taint_flag {
diff --git a/kernel/panic.c b/kernel/panic.c
index e2157ca387c8..534bc76e43da 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -386,6 +386,20 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = {
[ TAINT_LIVEPATCH ] = { 'K', ' ', true },
[ TAINT_AUX ] = { 'X', ' ', true },
[ TAINT_RANDSTRUCT ] = { 'T', ' ', true },
+ [ TAINT_18 ] = { '?', '-', false },
+ [ TAINT_19 ] = { '?', '-', false },
+ [ TAINT_20 ] = { '?', '-', false },
+ [ TAINT_21 ] = { '?', '-', false },
+ [ TAINT_22 ] = { '?', '-', false },
+ [ TAINT_23 ] = { '?', '-', false },
+ [ TAINT_24 ] = { '?', '-', false },
+ [ TAINT_25 ] = { '?', '-', false },
+ [ TAINT_26 ] = { '?', '-', false },
+ [ TAINT_27 ] = { '?', '-', false },
+ [ TAINT_RESERVED28 ] = { '?', '-', false },
+ [ TAINT_RESERVED29 ] = { '?', '-', false },
+ [ TAINT_RESERVED30 ] = { '?', '-', false },
+ [ TAINT_RESERVED31 ] = { '?', '-', false },
};
/**
--
2.28.0

View File

@ -1,96 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Maurizio Lombardi <mlombard@redhat.com>
Date: Mon, 18 Jun 2018 12:51:25 -0400
Subject: [PATCH] add pci_hw_vendor_status()
Message-id: <1529326285-28560-1-git-send-email-mlombard@redhat.com>
Patchwork-id: 222337
O-Subject: [RHEL8 PATCH] pci: add pci_hw_vendor_status()
Bugzilla: 1590829
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
This patch adds pci_hw_vendor_status() like in RHEL7 which should be called
during the driver's probe to identify deprecated devices.
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1590829
Brew: https://brewweb.devel.redhat.com/taskinfo?taskID=16761315
See RHEL7 commits e0dddd9a63403ec82077ed410074fc6485873d4b and
3fcddde5ddf4b190c84ce9d83d56a75137513bd7
RHEL_only.
Upstream Status: RHEL only
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/pci/pci-driver.c | 29 +++++++++++++++++++++++++++++
include/linux/pci.h | 4 ++++
2 files changed, 33 insertions(+)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 449466f71040..f5678ed743bf 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -19,6 +19,7 @@
#include <linux/kexec.h>
#include <linux/of_device.h>
#include <linux/acpi.h>
+#include <linux/kernel.h>
#include "pci.h"
#include "pcie/portdrv.h"
@@ -279,6 +280,34 @@ static const struct pci_device_id *pci_match_device(struct pci_driver *drv,
return found_id;
}
+/**
+ * pci_hw_vendor_status - Tell if a PCI device is supported by the HW vendor
+ * @ids: array of PCI device id structures to search in
+ * @dev: the PCI device structure to match against
+ *
+ * Used by a driver to check whether this device is in its list of unsupported
+ * devices. Returns the matching pci_device_id structure or %NULL if there is
+ * no match.
+ *
+ * Reserved for Internal Red Hat use only.
+ */
+const struct pci_device_id *pci_hw_vendor_status(
+ const struct pci_device_id *ids,
+ struct pci_dev *dev)
+{
+ char devinfo[64];
+ const struct pci_device_id *ret = pci_match_id(ids, dev);
+
+ if (ret) {
+ snprintf(devinfo, sizeof(devinfo), "%s %s",
+ dev_driver_string(&dev->dev), dev_name(&dev->dev));
+ mark_hardware_deprecated(devinfo);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(pci_hw_vendor_status);
+
struct drv_dev_and_id {
struct pci_driver *drv;
struct pci_dev *dev;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 835530605c0d..1a5afb3b706f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1406,6 +1406,10 @@ int pci_add_dynid(struct pci_driver *drv,
unsigned long driver_data);
const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
struct pci_dev *dev);
+/* Reserved for Internal Red Hat use only */
+const struct pci_device_id *pci_hw_vendor_status(
+ const struct pci_device_id *ids,
+ struct pci_dev *dev);
int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
int pass);
--
2.28.0

View File

@ -1,89 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Robert Richter <rrichter@redhat.com>
Date: Thu, 7 Jun 2018 22:59:33 -0400
Subject: [PATCH] ahci: thunderx2: Fix for errata that affects stop engine
Message-id: <1528412373-19128-3-git-send-email-rrichter@redhat.com>
Patchwork-id: 220952
O-Subject: [RHEL-8.0 BZ 1563590 v2 2/2] ahci: thunderx2: Fix for errata that affects stop engine
Bugzilla: 1563590
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
From: Jayachandran C <jnair@caviumnetworks.com>
Apply workaround for this errata:
Synopsis: Resetting PxCMD.ST may hang the SATA device
Description: An internal ping-pong buffer state is not reset
correctly for an PxCMD.ST=0 command for a SATA channel. This
may cause the SATA interface to hang when a PxCMD.ST=0 command
is received.
Workaround: A SATA_BIU_CORE_ENABLE.sw_init_bsi must be asserted
by the driver whenever the PxCMD.ST needs to be de-asserted. This
will reset both the ports. So, it may not always work in a 2
channel SATA system.
Resolution: Fix in B0.
Add the code to ahci_stop_engine() to do this. It is not easy to
stop the other "port" since it is associated with a different AHCI
interface. Please note that with this fix, SATA reset does not
hang any more, but it can cause failures on the other interface
if that is in active use.
Unfortunately, we have nothing other the the CPU ID to check if the
SATA block has this issue.
RHEL-only:
Both patches are in RHEL-7.6 also. Inclusion of the patches into RHEL-8
was discussed. Since there are partners with Ax system configurations it
was decided to carry them in RHEL8 too. See:
https://bugzilla.redhat.com/show_bug.cgi?id=1563590#c1
[v3 with new delays]
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Upstream Status: RHEL only
Signed-off-by: Robert Richter <rrichter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/ata/libahci.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ea5bf5f4cbed..71c55cae27ac 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -666,6 +666,24 @@ int ahci_stop_engine(struct ata_port *ap)
tmp &= ~PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
+#ifdef CONFIG_ARM64
+ /* Rev Ax of Cavium CN99XX needs a hack for port stop */
+ if (dev_is_pci(ap->host->dev) &&
+ to_pci_dev(ap->host->dev)->vendor == 0x14e4 &&
+ to_pci_dev(ap->host->dev)->device == 0x9027 &&
+ midr_is_cpu_model_range(read_cpuid_id(),
+ MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN),
+ MIDR_CPU_VAR_REV(0, 0),
+ MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) {
+ tmp = readl(hpriv->mmio + 0x8000);
+ udelay(100);
+ writel(tmp | (1 << 26), hpriv->mmio + 0x8000);
+ udelay(100);
+ writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000);
+ dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n");
+ }
+#endif
+
/* wait for engine to stop. This could be as long as 500 msec */
tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
--
2.28.0

View File

@ -1,128 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Thu, 11 Jun 2020 21:03:36 -0400
Subject: [PATCH] arch/x86: Remove vendor specific CPU ID checks
Upstream Status: RHEL only
After discussions with Devel, QE, Support, and Certification we have
decided to drop the CPU specific checks in rh_check_supported().
Certification is adopting a new process in which CPU certifications will
be tracked on https://catalog.redhat.com.
Remove the vendor specific CPU ID checks from rh_check_supported().
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: David Arcari <darcari@redhat.com>
---
arch/x86/kernel/setup.c | 85 -----------------------------------------
1 file changed, 85 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 66441cb9c1af..6100995124f9 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -758,72 +758,6 @@ static void __init trim_low_memory_range(void)
}
#ifdef CONFIG_RHEL_DIFFERENCES
-static bool valid_amd_processor(__u8 family, const char *model_id)
-{
- bool valid;
-
- switch(family) {
- case 0x15:
- valid = true;
- break;
-
- case 0x17:
- valid = strstr(model_id, "AMD EPYC 7");
- break;
-
- default:
- valid = false;
- break;
- }
-
- return valid;
-}
-
-static bool valid_intel_processor(__u8 family, __u8 model, __u8 stepping)
-{
- bool valid;
-
- if (family != 6)
- return false;
-
- switch(model) {
- case INTEL_FAM6_ATOM_GOLDMONT_D:
- case INTEL_FAM6_ATOM_GOLDMONT_PLUS:
-
- case INTEL_FAM6_BROADWELL:
- case INTEL_FAM6_BROADWELL_G:
- case INTEL_FAM6_BROADWELL_X:
- case INTEL_FAM6_BROADWELL_D:
-
- case INTEL_FAM6_HASWELL:
- case INTEL_FAM6_HASWELL_G:
- case INTEL_FAM6_HASWELL_L:
- case INTEL_FAM6_HASWELL_X:
- valid = true;
- break;
-
- case INTEL_FAM6_KABYLAKE:
- valid = (stepping <= 10);
- break;
-
- case INTEL_FAM6_KABYLAKE_L:
- valid = (stepping <= 11);
- break;
-
- case INTEL_FAM6_SKYLAKE_L:
- case INTEL_FAM6_SKYLAKE:
- case INTEL_FAM6_SKYLAKE_X:
- /* stepping > 4 is Cascade Lake and is not supported */
- valid = (stepping <= 4);
- break;
-
- default:
- valid = false;
- break;
- }
-
- return valid;
-}
static void rh_check_supported(void)
{
@@ -844,27 +778,8 @@ static void rh_check_supported(void)
*/
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
- if (!valid_amd_processor(boot_cpu_data.x86,
- boot_cpu_data.x86_model_id)) {
- pr_crit("Detected CPU family %xh model %d\n",
- boot_cpu_data.x86,
- boot_cpu_data.x86_model);
- mark_hardware_unsupported("AMD Processor");
- }
- break;
-
case X86_VENDOR_INTEL:
- if (!valid_intel_processor(boot_cpu_data.x86,
- boot_cpu_data.x86_model,
- boot_cpu_data.x86_stepping)) {
- pr_crit("Detected CPU family %d model %d stepping %d\n",
- boot_cpu_data.x86,
- boot_cpu_data.x86_model,
- boot_cpu_data.x86_stepping);
- mark_hardware_unsupported("Intel Processor");
- }
break;
-
default:
pr_crit("Detected processor %s %s\n",
boot_cpu_data.x86_vendor_id,
--
2.28.0

View File

@ -1,38 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Tue, 1 Oct 2019 15:51:23 +0000
Subject: [PATCH] arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT
Message-id: <20191001181256.22935-1-jcline@redhat.com>
Patchwork-id: 275498
O-Subject: [ARK INTERNAL PATCH] [ARK INTERNAL PATCH] [redhat] Add patch
to drop the EXPERT setting from ARM64_FORCE_52BIT
Bugzilla:
RH-Acked-by: Laura Abbott <labbott@redhat.com>
We don't turn on EXPERT as there are few settings we actually want to
mess with. Remove the dependency for ARM64_FORCE_52BIT as we do want
that on in debug builds to help find 52-bit bugs.
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/arm64/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index e11b4ea06127..74c5325108c0 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -861,7 +861,7 @@ endchoice
config ARM64_FORCE_52BIT
bool "Force 52-bit virtual addresses for userspace"
- depends on ARM64_VA_BITS_52 && EXPERT
+ depends on ARM64_VA_BITS_52
help
For systems with 52-bit userspace VAs enabled, the kernel will attempt
to maintain compatibility with older software by providing 48-bit VAs
--
2.28.0

View File

@ -1,31 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jon Masters <jcm@redhat.com>
Date: Thu, 18 Jul 2019 15:47:26 -0400
Subject: [PATCH] arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
We will use this to force CONFIG_HIGHPTE off on LPAE for now
Signed-off-by: Jon Masters <jcm@redhat.com>
---
arch/arm/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e00d94b16658..4db48405b23a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1514,9 +1514,9 @@ config HIGHMEM
If unsure, say n.
config HIGHPTE
- bool "Allocate 2nd-level pagetables from highmem" if EXPERT
+ bool "Allocate 2nd-level pagetables from highmem"
depends on HIGHMEM
- default y
+ default n
help
The VM uses one page of physical memory for each page table.
For systems with a lot of processes, this can use a lot of
--
2.28.0

View File

@ -1,71 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Chris Leech <cleech@redhat.com>
Date: Thu, 2 Jan 2020 14:24:43 -0500
Subject: [PATCH] be2iscsi: remove unsupported device IDs
Message-id: <20180503194032.1461134-1-cleech@redhat.com>
Patchwork-id: 212454
O-Subject: [RHEL8 PATCH e-stor] scsi: be2iscsi: remove unsupported device IDs
Bugzilla: 1574502
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Tom Coughlan <coughlan@redhat.com>
RH-Acked-by: Ewan Milne <emilne@redhat.com>
Bugzilla: 1574502
Upstream Status: RHEL Specific
Build Info: brew 15975638
BladeEngine 2 generation devices are deprecated in RHEL 7
and not supported in RHEL 8
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
be2iscsi: remove BE3 family support
Message-id: <1530890927-5792-1-git-send-email-mlombard@redhat.com>
Patchwork-id: 223576
O-Subject: [RHEL8 e-stor PATCH] be2iscsi: remove BE3 family support
Bugzilla: 1598366
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>
RH-Acked-by: Chris Leech <cleech@redhat.com>
BZ: https://bugzilla.redhat.com/show_bug.cgi?id98366
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID996775
Upstream: RHEL-only, they tried to mark BE3 as unsupported
in upstream kernel but the patch has been rejected.
See: https://marc.info/?l=linux-scsi&m2835991600881&w=2
Broadcom doesn't want to provide support for the BE3 device family
in RHEL8.
This patch removes the BE3's PCI-IDs.
Upstream Status: RHEL only
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/scsi/be2iscsi/be_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 8dc2e0824ad7..dfb9d0ae3247 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -370,11 +370,13 @@ static int beiscsi_eh_device_reset(struct scsi_cmnd *sc)
/*------------------- PCI Driver operations and data ----------------- */
static const struct pci_device_id beiscsi_pci_id_table[] = {
+#ifndef CONFIG_RHEL_DIFFERENCES
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) },
+#endif
{ PCI_DEVICE(ELX_VENDOR_ID, OC_SKH_ID1) },
{ 0 }
};
--
2.28.0

View File

@ -1,53 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Eugene Syromiatnikov <esyr@redhat.com>
Date: Thu, 14 Jun 2018 16:36:08 -0400
Subject: [PATCH] bpf: Add tech preview taint for syscall
Message-id: <394af3a9985d1ad9ea6741cb95ff145312d106b9.1528991396.git.esyr@redhat.com>
Patchwork-id: 8251
O-Subject: [kernel team] [RHEL8 PATCH v4 3/5] [bpf] bpf: Add tech preview taint for syscall
Bugzilla: 1559877
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
RH-Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Adding tech preview taint for using the eBPF syscall.
Based on a RHEL 7 commit "bpf: Add tech preview taint for syscall" by
Jiri Olsa.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1559877
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16716594
Upstream Status: RHEL only
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
kernel/bpf/syscall.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index f7e570292afe..56c39dc8995e 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -4155,11 +4155,17 @@ static int bpf_iter_create(union bpf_attr *attr)
SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, size)
{
union bpf_attr attr;
+ static int marked;
int err;
if (sysctl_unprivileged_bpf_disabled && !bpf_capable())
return -EPERM;
+ if (!marked) {
+ mark_tech_preview("eBPF syscall", NULL);
+ marked = true;
+ }
+
err = bpf_check_uarg_tail_zero(uattr, sizeof(attr), size);
if (err)
return err;
--
2.28.0

View File

@ -1,122 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Eugene Syromiatnikov <esyr@redhat.com>
Date: Thu, 14 Jun 2018 16:36:02 -0400
Subject: [PATCH] bpf: set unprivileged_bpf_disabled to 1 by default, add a
boot parameter
Message-id: <133022c6c389ca16060bd20ef69199de0800200b.1528991396.git.esyr@redhat.com>
Patchwork-id: 8250
O-Subject: [kernel team] [RHEL8 PATCH v4 2/5] [bpf] bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter
Bugzilla: 1561171
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
RH-Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
This patch sets kernel.unprivileged_bpf_disabled sysctl knob to 1
by default, and provides an ability (in a form of a boot-time parameter)
to reset it to 0, as it is impossible to do so in runtime. Since
unprivileged BPF is considered unsupported, it also taints the kernel.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1561171
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16716594
Upstream: RHEL only. The patch (in a more generic form) has been
proposed upstream[1] and subsequently rejected.
[1] https://lkml.org/lkml/2018/5/21/344
Upstream Status: RHEL only
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
.../admin-guide/kernel-parameters.txt | 8 +++++++
include/linux/kernel.h | 2 +-
kernel/bpf/syscall.c | 21 ++++++++++++++++++-
kernel/panic.c | 2 +-
4 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 98ea67f27809..352afb16f424 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5373,6 +5373,14 @@
unknown_nmi_panic
[X86] Cause panic on unknown NMI.
+ unprivileged_bpf_disabled=
+ Format: { "0" | "1" }
+ Sets the initial value of
+ kernel.unprivileged_bpf_disabled sysctl knob.
+ 0 - unprivileged bpf() syscall access is enabled.
+ 1 - unprivileged bpf() syscall access is disabled.
+ Default value is 1.
+
usbcore.authorized_default=
[USB] Default USB device authorization:
(default -1 = authorized except for wireless USB,
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index ae2859863d59..f24819663517 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -619,7 +619,7 @@ extern enum system_states {
#define TAINT_RESERVED28 28
#define TAINT_RESERVED29 29
#define TAINT_RESERVED30 30
-#define TAINT_RESERVED31 31
+#define TAINT_UNPRIVILEGED_BPF 31
/* End of Red Hat-specific taint flags */
#define TAINT_FLAGS_COUNT 32
#define TAINT_FLAGS_MAX ((1UL << TAINT_FLAGS_COUNT) - 1)
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 2f343ce15747..f7e570292afe 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -24,6 +24,7 @@
#include <linux/ctype.h>
#include <linux/nospec.h>
#include <linux/audit.h>
+#include <linux/init.h>
#include <uapi/linux/btf.h>
#include <linux/pgtable.h>
#include <linux/bpf_lsm.h>
@@ -48,7 +49,25 @@ static DEFINE_SPINLOCK(map_idr_lock);
static DEFINE_IDR(link_idr);
static DEFINE_SPINLOCK(link_idr_lock);
-int sysctl_unprivileged_bpf_disabled __read_mostly;
+/* RHEL-only: default to 1 */
+int sysctl_unprivileged_bpf_disabled __read_mostly = 1;
+
+static int __init unprivileged_bpf_setup(char *str)
+{
+ unsigned long disabled;
+ if (!kstrtoul(str, 0, &disabled))
+ sysctl_unprivileged_bpf_disabled = !!disabled;
+
+ if (!sysctl_unprivileged_bpf_disabled) {
+ pr_warn("Unprivileged BPF has been enabled "
+ "(unprivileged_bpf_disabled=0 has been supplied "
+ "in boot parameters), tainting the kernel");
+ add_taint(TAINT_UNPRIVILEGED_BPF, LOCKDEP_STILL_OK);
+ }
+
+ return 1;
+}
+__setup("unprivileged_bpf_disabled=", unprivileged_bpf_setup);
static const struct bpf_map_ops * const bpf_map_types[] = {
#define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type)
diff --git a/kernel/panic.c b/kernel/panic.c
index 534bc76e43da..e3bae852d92f 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -399,7 +399,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = {
[ TAINT_RESERVED28 ] = { '?', '-', false },
[ TAINT_RESERVED29 ] = { '?', '-', false },
[ TAINT_RESERVED30 ] = { '?', '-', false },
- [ TAINT_RESERVED31 ] = { '?', '-', false },
+ [ TAINT_UNPRIVILEGED_BPF ] = { 'u', ' ', false },
};
/**
--
2.28.0

View File

@ -1,423 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Mon, 16 Mar 2020 21:35:01 +0800
Subject: [PATCH] drm: panel: add Xingbangda XBD599 panel
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI IPS LCD panel made by
Xingbangda, which is used on PinePhone final assembled phones.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-xingbangda-xbd599.c | 366 ++++++++++++++++++
3 files changed, 376 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index de2f2a452be5..3ce658de416b 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -462,6 +462,15 @@ config DRM_PANEL_VISIONOX_RM69299
Say Y here if you want to enable support for Visionox
RM69299 DSI Video Mode panel.
+config DRM_PANEL_XINGBANGDA_XBD599
+ tristate "Xingbangda XBD599 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the Xingbangda XBD599
+ MIPI DSI Video Mode panel.
+
config DRM_PANEL_XINPENG_XPP055C272
tristate "Xinpeng XPP055C272 panel driver"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index e45ceac6286f..bd10617430ec 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -49,4 +49,5 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
+obj-$(CONFIG_DRM_PANEL_XINGBANGDA_XBD599) += panel-xingbangda-xbd599.o
obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
diff --git a/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c b/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
new file mode 100644
index 000000000000..b483f96ee1db
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xingbangda XBD599 MIPI-DSI panel driver
+ *
+ * Copyright (C) 2019-2020 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on panel-rocktech-jh057n00900.c, which is:
+ * Copyright (C) Purism SPC 2019
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+/* Manufacturer specific Commands send via DSI */
+#define ST7703_CMD_ALL_PIXEL_OFF 0x22
+#define ST7703_CMD_ALL_PIXEL_ON 0x23
+#define ST7703_CMD_SETDISP 0xB2
+#define ST7703_CMD_SETRGBIF 0xB3
+#define ST7703_CMD_SETCYC 0xB4
+#define ST7703_CMD_SETBGP 0xB5
+#define ST7703_CMD_SETVCOM 0xB6
+#define ST7703_CMD_SETOTP 0xB7
+#define ST7703_CMD_SETPOWER_EXT 0xB8
+#define ST7703_CMD_SETEXTC 0xB9
+#define ST7703_CMD_SETMIPI 0xBA
+#define ST7703_CMD_SETVDC 0xBC
+#define ST7703_CMD_SETSCR 0xC0
+#define ST7703_CMD_SETPOWER 0xC1
+#define ST7703_CMD_UNK_C6 0xC6
+#define ST7703_CMD_SETPANEL 0xCC
+#define ST7703_CMD_SETGAMMA 0xE0
+#define ST7703_CMD_SETEQ 0xE3
+#define ST7703_CMD_SETGIP1 0xE9
+#define ST7703_CMD_SETGIP2 0xEA
+
+static const char * const regulator_names[] = {
+ "iovcc",
+ "vcc",
+};
+
+struct xbd599 {
+ struct device *dev;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+ struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+ bool prepared;
+};
+
+static inline struct xbd599 *panel_to_xbd599(struct drm_panel *panel)
+{
+ return container_of(panel, struct xbd599, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
+ static const u8 d[] = { seq }; \
+ int ret; \
+ ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static int xbd599_init_sequence(struct xbd599 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ struct device *dev = ctx->dev;
+ int ret;
+
+ /*
+ * Init sequence was supplied by the panel vendor.
+ */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC,
+ 0xF1, 0x12, 0x83);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
+ 0x33, 0x81, 0x05, 0xF9, 0x0E, 0x0E, 0x20, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x25,
+ 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, 0x4F, 0x11,
+ 0x00, 0x00, 0x37);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
+ 0x25, 0x22, 0x20, 0x03);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
+ 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
+ 0x00, 0x00);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
+ 0x73, 0x73, 0x50, 0x50, 0x00, 0xC0, 0x08, 0x70,
+ 0x00);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0xF0);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
+ 0x00, 0x00, 0x0B, 0x0B, 0x10, 0x10, 0x00, 0x00,
+ 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
+ dsi_dcs_write_seq(dsi, 0xC6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
+ 0x74, 0x00, 0x32, 0x32, 0x77, 0xF1, 0xFF, 0xFF,
+ 0xCC, 0xCC, 0x77, 0x77);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x07, 0x07);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x2C, 0x2C);
+ dsi_dcs_write_seq(dsi, 0xBF, 0x02, 0x11, 0x00);
+
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
+ 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
+ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+ 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+ 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+ 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
+ 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+ 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
+ 0xA5, 0x00, 0x00, 0x00, 0x00);
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
+ 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
+ 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
+ 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
+ 0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
+ 0x12, 0x18);
+ msleep(20);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n");
+ return ret;
+ }
+ msleep(250);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret)
+ return ret;
+ msleep(50);
+
+ DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
+ return 0;
+}
+
+static int xbd599_prepare(struct drm_panel *panel)
+{
+ struct xbd599 *ctx = panel_to_xbd599(panel);
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret)
+ return ret;
+
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(20, 40);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ msleep(20);
+
+ ctx->prepared = true;
+
+ return 0;
+}
+
+static int xbd599_enable(struct drm_panel *panel)
+{
+ struct xbd599 *ctx = panel_to_xbd599(panel);
+ int ret;
+
+ ret = xbd599_init_sequence(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int xbd599_disable(struct drm_panel *panel)
+{
+ struct xbd599 *ctx = panel_to_xbd599(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ return mipi_dsi_dcs_set_display_off(dsi);
+}
+
+static int xbd599_unprepare(struct drm_panel *panel)
+{
+ struct xbd599 *ctx = panel_to_xbd599(panel);
+
+ if (!ctx->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ ctx->prepared = false;
+
+ return 0;
+}
+
+static const struct drm_display_mode xbd599_default_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 40,
+ .hsync_end = 720 + 40 + 40,
+ .htotal = 720 + 40 + 40 + 40,
+ .vdisplay = 1440,
+ .vsync_start = 1440 + 18,
+ .vsync_end = 1440 + 18 + 10,
+ .vtotal = 1440 + 18 + 10 + 17,
+ .vrefresh = 60,
+ .clock = 69000,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+
+ .width_mm = 68,
+ .height_mm = 136,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int xbd599_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct xbd599 *ctx = panel_to_xbd599(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &xbd599_default_mode);
+ if (!mode) {
+ DRM_DEV_ERROR(ctx->dev, "Failed to add mode\n");
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs xbd599_drm_funcs = {
+ .prepare = xbd599_prepare,
+ .enable = xbd599_enable,
+ .disable = xbd599_disable,
+ .unprepare = xbd599_unprepare,
+ .get_modes = xbd599_get_modes,
+};
+
+static int xbd599_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct xbd599 *ctx;
+ int i, ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+ ctx->supplies[i].supply = regulator_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0) {
+ DRM_DEV_ERROR(&dsi->dev, "cannot get regulators\n");
+ return ret;
+ }
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+ drm_panel_init(&ctx->panel, &dsi->dev, &xbd599_drm_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret)
+ return ret;
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+ xbd599_default_mode.hdisplay,
+ xbd599_default_mode.vdisplay,
+ xbd599_default_mode.vrefresh,
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+ return 0;
+}
+
+static void xbd599_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct xbd599 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = drm_panel_unprepare(&ctx->panel);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
+ ret);
+}
+
+static int xbd599_remove(struct mipi_dsi_device *dsi)
+{
+ struct xbd599 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ xbd599_shutdown(dsi);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
+ ret);
+
+ drm_panel_remove(&ctx->panel);
+
+ return 0;
+}
+
+static const struct of_device_id xbd599_of_match[] = {
+ { .compatible = "xingbangda,xbd599", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, xbd599_of_match);
+
+static struct mipi_dsi_driver xbd599_driver = {
+ .probe = xbd599_probe,
+ .remove = xbd599_remove,
+ .shutdown = xbd599_shutdown,
+ .driver = {
+ .name = "panel-xingbangda-xbd599",
+ .of_match_table = xbd599_of_match,
+ },
+};
+module_mipi_dsi_driver(xbd599_driver);
+
+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
+MODULE_DESCRIPTION("DRM driver for Xingbangda XBD599 MIPI DSI panel");
+MODULE_LICENSE("GPL v2");
--
2.28.0

View File

@ -1,59 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Mon, 16 Mar 2020 21:35:02 +0800
Subject: [PATCH] drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
The max() function call in horizontal timing calculation shouldn't pad a
length already subtracted with overhead to overhead, instead it should
only prevent the set timing to underflow.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index aa67cb037e9d..52e009dc632b 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -556,7 +556,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
*/
#define HSA_PACKET_OVERHEAD 10
hsa = max((unsigned int)HSA_PACKET_OVERHEAD,
- (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
+ (mode->hsync_end - mode->hsync_start) * Bpp) - HSA_PACKET_OVERHEAD;
/*
* The backporch is set using a blanking packet (4
@@ -565,7 +565,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
*/
#define HBP_PACKET_OVERHEAD 6
hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
- (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
+ (mode->htotal - mode->hsync_end) * Bpp) - HBP_PACKET_OVERHEAD;
/*
* The frontporch is set using a sync event (4 bytes)
@@ -575,7 +575,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
*/
#define HFP_PACKET_OVERHEAD 16
hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
- (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
+ (mode->hsync_start - mode->hdisplay) * Bpp) - HFP_PACKET_OVERHEAD;
/*
* The blanking is set using a sync event (4 bytes)
@@ -584,8 +584,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
*/
#define HBLK_PACKET_OVERHEAD 10
hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
- (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
- HBLK_PACKET_OVERHEAD);
+ (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp) -
+ HBLK_PACKET_OVERHEAD;
/*
* And I'm not entirely sure what vblk is about. The driver in
--
2.28.0

View File

@ -1,74 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Mon, 16 Mar 2020 21:35:00 +0800
Subject: [PATCH] dt-bindings: panel: add binding for Xingbangda XBD599 panel
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel.
Add its device tree binding.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
.../display/panel/xingbangda,xbd599.yaml | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
new file mode 100644
index 000000000000..b27bcf11198f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/xingbangda,xbd599.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xingbangda XBD599 5.99in MIPI-DSI LCD panel
+
+maintainers:
+ - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: xingbangda,xbd599
+ reg: true
+ backlight: true
+ reset-gpios: true
+ vcc-supply:
+ description: regulator that supplies the VCC voltage
+ iovcc-supply:
+ description: regulator that supplies the IOVCC voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - vcc-supply
+ - iovcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "xingbangda,xbd599";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&reg_dldo2>;
+ vcc-supply = <&reg_ldo_io0>;
+ };
+ };
+
+...
--
2.28.0

View File

@ -1,35 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Aaron Ma <aaron.ma@canonical.com>
Date: Tue, 24 Mar 2020 03:16:39 +0800
Subject: [PATCH] e1000e: bump up timeout to wait when ME un-configure ULP mode
ME takes 2+ seconds to un-configure ULP mode done after resume
from s2idle on some ThinkPad laptops.
Without enough wait, reset and re-init will fail with error.
Fixes: f15bb6dde738cc8fa0 ("e1000e: Add support for S0ix")
BugLink: https://bugs.launchpad.net/bugs/1865570
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
---
drivers/net/ethernet/intel/e1000e/ich8lan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index b2f2fcfdf732..a9e4c059d402 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1245,9 +1245,9 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
ew32(H2ME, mac_reg);
}
- /* Poll up to 300msec for ME to clear ULP_CFG_DONE. */
+ /* Poll up to 2.5sec for ME to clear ULP_CFG_DONE. */
while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
- if (i++ == 30) {
+ if (i++ == 250) {
ret_val = -E1000_ERR_PHY;
goto out;
}
--
2.28.0

View File

@ -1,161 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 27 Feb 2018 10:04:55 +0000
Subject: [PATCH] efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode
UEFI machines can be booted in Secure Boot mode. Add an EFI_SECURE_BOOT
flag that can be passed to efi_enabled() to find out whether secure boot is
enabled.
Move the switch-statement in x86's setup_arch() that inteprets the
secure_boot boot parameter to generic code and set the bit there.
Upstream Status: RHEL only
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
cc: linux-efi@vger.kernel.org
[Rebased for context; efi_is_table_address was moved to arch/x86]
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/x86/kernel/setup.c | 14 +-----------
drivers/firmware/efi/Makefile | 1 +
drivers/firmware/efi/secureboot.c | 38 +++++++++++++++++++++++++++++++
include/linux/efi.h | 18 ++++++++++-----
4 files changed, 52 insertions(+), 19 deletions(-)
create mode 100644 drivers/firmware/efi/secureboot.c
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 112efbef3414..c9de4b36ca51 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1255,19 +1255,7 @@ void __init setup_arch(char **cmdline_p)
/* Allocate bigger log buffer */
setup_log_buf(1);
- if (efi_enabled(EFI_BOOT)) {
- switch (boot_params.secure_boot) {
- case efi_secureboot_mode_disabled:
- pr_info("Secure boot disabled\n");
- break;
- case efi_secureboot_mode_enabled:
- pr_info("Secure boot enabled\n");
- break;
- default:
- pr_info("Secure boot could not be determined\n");
- break;
- }
- }
+ efi_set_secure_boot(boot_params.secure_boot);
reserve_initrd();
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index 7a216984552b..f0ef02d733af 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_EFI_FAKE_MEMMAP) += fake_map.o
obj-$(CONFIG_EFI_BOOTLOADER_CONTROL) += efibc.o
obj-$(CONFIG_EFI_TEST) += test/
obj-$(CONFIG_EFI_DEV_PATH_PARSER) += dev-path-parser.o
+obj-$(CONFIG_EFI) += secureboot.o
obj-$(CONFIG_APPLE_PROPERTIES) += apple-properties.o
obj-$(CONFIG_EFI_RCI2_TABLE) += rci2-table.o
obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE) += embedded-firmware.o
diff --git a/drivers/firmware/efi/secureboot.c b/drivers/firmware/efi/secureboot.c
new file mode 100644
index 000000000000..de0a3714a5d4
--- /dev/null
+++ b/drivers/firmware/efi/secureboot.c
@@ -0,0 +1,38 @@
+/* Core kernel secure boot support.
+ *
+ * Copyright (C) 2017 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+
+/*
+ * Decide what to do when UEFI secure boot mode is enabled.
+ */
+void __init efi_set_secure_boot(enum efi_secureboot_mode mode)
+{
+ if (efi_enabled(EFI_BOOT)) {
+ switch (mode) {
+ case efi_secureboot_mode_disabled:
+ pr_info("Secure boot disabled\n");
+ break;
+ case efi_secureboot_mode_enabled:
+ set_bit(EFI_SECURE_BOOT, &efi.flags);
+ pr_info("Secure boot enabled\n");
+ break;
+ default:
+ pr_warn("Secure boot could not be determined (mode %u)\n",
+ mode);
+ break;
+ }
+ }
+}
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 92aa4697f558..1cdc5d8b6ac3 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -785,6 +785,14 @@ extern int __init efi_setup_pcdp_console(char *);
#define EFI_MEM_ATTR 10 /* Did firmware publish an EFI_MEMORY_ATTRIBUTES table? */
#define EFI_MEM_NO_SOFT_RESERVE 11 /* Is the kernel configured to ignore soft reservations? */
#define EFI_PRESERVE_BS_REGIONS 12 /* Are EFI boot-services memory segments available? */
+#define EFI_SECURE_BOOT 13 /* Are we in Secure Boot mode? */
+
+enum efi_secureboot_mode {
+ efi_secureboot_mode_unset,
+ efi_secureboot_mode_unknown,
+ efi_secureboot_mode_disabled,
+ efi_secureboot_mode_enabled,
+};
#ifdef CONFIG_EFI
/*
@@ -796,6 +804,8 @@ static inline bool efi_enabled(int feature)
}
extern void efi_reboot(enum reboot_mode reboot_mode, const char *__unused);
+extern void __init efi_set_secure_boot(enum efi_secureboot_mode mode);
+
bool __pure __efi_soft_reserve_enabled(void);
static inline bool __pure efi_soft_reserve_enabled(void)
@@ -822,6 +832,8 @@ efi_capsule_pending(int *reset_type)
return false;
}
+static inline void efi_set_secure_boot(enum efi_secureboot_mode mode) {}
+
static inline bool efi_soft_reserve_enabled(void)
{
return false;
@@ -1094,12 +1106,6 @@ static inline bool efi_runtime_disabled(void) { return true; }
extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
extern unsigned long efi_call_virt_save_flags(void);
-enum efi_secureboot_mode {
- efi_secureboot_mode_unset,
- efi_secureboot_mode_unknown,
- efi_secureboot_mode_disabled,
- efi_secureboot_mode_enabled,
-};
enum efi_secureboot_mode efi_get_secureboot(void);
#ifdef CONFIG_RESET_ATTACK_MITIGATION
--
2.28.0

View File

@ -1,72 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 30 Sep 2019 21:28:16 +0000
Subject: [PATCH] efi: Lock down the kernel if booted in secure boot mode
UEFI Secure Boot provides a mechanism for ensuring that the firmware
will only load signed bootloaders and kernels. Certain use cases may
also require that all kernel modules also be signed. Add a
configuration option that to lock down the kernel - which includes
requiring validly signed modules - if the kernel is secure-booted.
Upstream Status: RHEL only
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/x86/kernel/setup.c | 8 ++++++++
security/lockdown/Kconfig | 13 +++++++++++++
2 files changed, 21 insertions(+)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c9de4b36ca51..a1a012702915 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -18,6 +18,7 @@
#include <linux/sfi.h>
#include <linux/hugetlb.h>
#include <linux/tboot.h>
+#include <linux/security.h>
#include <linux/usb/xhci-dbgp.h>
#include <uapi/linux/mount.h>
@@ -1104,6 +1105,13 @@ void __init setup_arch(char **cmdline_p)
if (efi_enabled(EFI_BOOT))
efi_init();
+ efi_set_secure_boot(boot_params.secure_boot);
+
+#ifdef CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT
+ if (efi_enabled(EFI_SECURE_BOOT))
+ security_lock_kernel_down("EFI Secure Boot mode", LOCKDOWN_INTEGRITY_MAX);
+#endif
+
dmi_setup();
/*
diff --git a/security/lockdown/Kconfig b/security/lockdown/Kconfig
index e84ddf484010..d0501353a4b9 100644
--- a/security/lockdown/Kconfig
+++ b/security/lockdown/Kconfig
@@ -16,6 +16,19 @@ config SECURITY_LOCKDOWN_LSM_EARLY
subsystem is fully initialised. If enabled, lockdown will
unconditionally be called before any other LSMs.
+config LOCK_DOWN_IN_EFI_SECURE_BOOT
+ bool "Lock down the kernel in EFI Secure Boot mode"
+ default n
+ depends on EFI && SECURITY_LOCKDOWN_LSM_EARLY
+ help
+ UEFI Secure Boot provides a mechanism for ensuring that the firmware
+ will only load signed bootloaders and kernels. Secure boot mode may
+ be determined from EFI variables provided by the system firmware if
+ not indicated by the boot parameters.
+
+ Enabling this option results in kernel lockdown being triggered if
+ EFI Secure Boot is set.
+
choice
prompt "Kernel default lockdown mode"
default LOCK_DOWN_KERNEL_FORCE_NONE
--
2.28.0

View File

@ -1,55 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Joseph Szczypek <jszczype@redhat.com>
Date: Thu, 2 Jan 2020 14:24:40 -0500
Subject: [PATCH] hpsa: remove old cciss-based smartarray pci ids
Message-id: <1524750809-43700-2-git-send-email-jszczype@redhat.com>
Patchwork-id: 211573
O-Subject: [RHEL8 e-stor PATCH 1/2] hpsa: remove old cciss-based smartarray pci ids
Bugzilla: 1471185
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>
Per discussion with Microsemi, the old PCI IDs for smartarrays
originally used with the old cciss driver are not being
supported with RHEL8. They are also not supported with RHEL7.
Therefore the PCI IDs and the catch-all are being removed.
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
---
drivers/scsi/hpsa.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 91794a50b31f..0c3dd00e8664 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -82,7 +82,9 @@ MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \
MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
MODULE_VERSION(HPSA_DRIVER_VERSION);
MODULE_LICENSE("GPL");
+#ifndef CONFIG_RHEL_DIFFERENCES
MODULE_ALIAS("cciss");
+#endif
static int hpsa_simple_mode;
module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR);
@@ -144,10 +146,12 @@ static const struct pci_device_id hpsa_pci_device_id[] = {
{PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x007D},
{PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0088},
{PCI_VENDOR_ID_HP, 0x333f, 0x103c, 0x333f},
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
+#endif
{0,}
};
--
2.28.0

View File

@ -1,43 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jonathan Toppins <jtoppins@redhat.com>
Date: Tue, 24 Jul 2018 19:17:40 -0400
Subject: [PATCH] ice: mark driver as tech-preview
Message-id: <f087de8dbe4e8eac9f0992cc34def0a07aba206d.1532459145.git.jtoppins@redhat.com>
Patchwork-id: 8526
O-Subject: [kernel team] [PATCH RHEL8 1/3] [redhat] ice: mark driver as tech-preview
Bugzilla: 1495347
RH-Acked-by: Steve Best <sbest@redhat.com>
RH-Acked-by: Don Dutile <ddutile@redhat.com>
RH-Acked-by: David S. Miller <davem@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Neil Horman <nhorman@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
Upstream Status: RHEL-only
Bugzilla: 1495347
Build Info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=17334539
Tested: booted and verified taint flags were set when the driver was loaded.
Upstream Status: RHEL only
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/net/ethernet/intel/ice/ice_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 4634b48949bb..e93470340eda 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4786,6 +4786,7 @@ static int __init ice_module_init(void)
pr_info("%s\n", ice_driver_string);
pr_info("%s\n", ice_copyright);
+ mark_tech_preview(DRV_SUMMARY, THIS_MODULE);
ice_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0, KBUILD_MODNAME);
if (!ice_wq) {
--
2.28.0

View File

@ -1,43 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Tue, 23 Jul 2019 11:39:36 -0400
Subject: [PATCH] [initial commit] Add Red Hat variables in the top level
makefile
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
Makefile | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 3e4868a6498b..502f9a9a2806 100644
--- a/Makefile
+++ b/Makefile
@@ -15,6 +15,9 @@ NAME = Bobtail Squid
PHONY := __all
__all:
+# Set RHEL variables
+include Makefile.rhelver
+
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
@@ -1160,7 +1163,13 @@ endef
define filechk_version.h
echo \#define LINUX_VERSION_CODE $(shell \
expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
- echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
+ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
+ echo '#define RHEL_MAJOR $(RHEL_MAJOR)'; \
+ echo '#define RHEL_MINOR $(RHEL_MINOR)'; \
+ echo '#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b))'; \
+ echo '#define RHEL_RELEASE_CODE \
+ $(shell expr $(RHEL_MAJOR) \* 256 + $(RHEL_MINOR))'; \
+ echo '#define RHEL_RELEASE "$(RHEL_RELEASE)"'
endef
$(version_h): FORCE
--
2.28.0

View File

@ -1,98 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Mon, 20 May 2019 22:21:02 -0400
Subject: [PATCH] iommu/arm-smmu: workaround DMA mode issues
Message-id: <20190520222102.19488-1-labbott@redhat.com>
Patchwork-id: 259215
O-Subject: [ARK INTERNAL PATCH] iommu/arm-smmu: workaround DMA mode issues
Bugzilla:
RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
From: Mark Salter <msalter@redhat.com>
Rebased for v5.2-rc1
Bugzilla: 1652259
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=19244562
Upstream status: RHEL only.
rhel8 commit 65feb1ed0ec9a088a63a90d46c0f7563ac96ad0f
Author: Mark Salter <msalter@redhat.com>
Date: Wed Nov 21 17:15:59 2018 +0100
[iommu] iommu/arm-smmu: workaround DMA mode issues
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1624077
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=18112820
Testing: Verified iommu.passthrough=1 no longer needed on gigabyte platforms.
Upstream Status: RHEL-only
In RHEL_ALT 7.5 we carried a RHEL-only patch which forced the arm smmuv2
into bypass mode due to performance issues on CN88xx. This was intended
to be a temporary hack until the issues were resolved. Another vendor
had issues with the iommu in bypass mode so we reverted the RHEL-only
patch so that iommu is in DMA mode by default (upstream default).
It turns on that there are remaining SMMU DMA mode issues on Gigabyte
platformws with CN88xx cpus. The problem manifests itself by pcie
card drivers failing to initialize the cards when SMMU is in DMA mode.
The root cause has not been determined yet, but looks likely to be
a hw or firmware issue. This patch forces bypass mode for Gigabyte
platforms. CN88xx isn't officially supported in RHEL but we have a
lot of them being used internally for testing, so I think we want
this to support that use case in RHEL8.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Donald Dutile <ddutile@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
drivers/iommu/iommu.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 609bd25bf154..c701912b13ab 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -7,6 +7,7 @@
#define pr_fmt(fmt) "iommu: " fmt
#include <linux/device.h>
+#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/types.h>
@@ -2849,3 +2850,24 @@ int iommu_sva_get_pasid(struct iommu_sva *handle)
return ops->sva_get_pasid(handle);
}
EXPORT_SYMBOL_GPL(iommu_sva_get_pasid);
+
+#ifdef CONFIG_ARM64
+static int __init iommu_quirks(void)
+{
+ const char *vendor, *name;
+
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ name = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ if (vendor &&
+ (strncmp(vendor, "GIGABYTE", 8) == 0 && name &&
+ (strncmp(name, "R120", 4) == 0 ||
+ strncmp(name, "R270", 4) == 0))) {
+ pr_warn("Gigabyte %s detected, force iommu passthrough mode", name);
+ iommu_def_domain_type = IOMMU_DOMAIN_IDENTITY;
+ }
+
+ return 0;
+}
+arch_initcall(iommu_quirks);
+#endif
--
2.28.0

View File

@ -1,123 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Sun, 10 Feb 2019 01:27:54 +0000
Subject: [PATCH] ipmi: do not configure ipmi for HPE m400
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1670017
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=20147017
Commit 913a89f009d9 ("ipmi: Don't initialize anything in the core until
something uses it") added new locking which broke context.
Message-id: <20180713142210.15700-1-tcamuso@redhat.com>
Patchwork-id: 224899
O-Subject: [RHEL8 BZ 1583537 1/1] ipmi: do not configure ipmi for HPE m400
Bugzilla: 1583537
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
RH-Acked-by: Al Stone <ahs3@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
bugzilla:https://bugzilla.redhat.com/show_bug.cgi?id=1583537
brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=17150528
RHEL-only
The ARM-based HPE m400 reports host-side ipmi as residing in intel
port-io space, which does not exist in ARM processors. Therefore, when
running on an m400, host-side ipmi configuration code must simply return
zero without trying to configure the host-side ipmi.
This patch prevents panic on boot by averting attempts to configure
host-side ipmi on this platform.
Though HPE m400 is not certified with RHEL, and HPE has relegated it to
EOL status, the platform is still used extensively in ARM development
and test for RHEL.
Testing:
Boot without blacklisting ipmi and check to see that no ipmi modules
are loaded.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
cc: Prarit Bhargava <prarit@redhat.com>
cc: Brendan Conoboy <blc@redhat.com>
cc: Jeff Bastian <jbastian@redhat.com>
cc: Scott Herold <sherold@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Tony Camuso <tcamuso@redhat.com>
Acked-by: Dean Nelson <dnelson@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
---
drivers/char/ipmi/ipmi_dmi.c | 15 +++++++++++++++
drivers/char/ipmi/ipmi_msghandler.c | 16 +++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/char/ipmi/ipmi_dmi.c b/drivers/char/ipmi/ipmi_dmi.c
index bbf7029e224b..cf7faa970dd6 100644
--- a/drivers/char/ipmi/ipmi_dmi.c
+++ b/drivers/char/ipmi/ipmi_dmi.c
@@ -215,6 +215,21 @@ static int __init scan_for_dmi_ipmi(void)
{
const struct dmi_device *dev = NULL;
+#ifdef CONFIG_ARM64
+ /* RHEL-only
+ * If this is ARM-based HPE m400, return now, because that platform
+ * reports the host-side ipmi address as intel port-io space, which
+ * does not exist in the ARM architecture.
+ */
+ const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+ pr_debug("%s does not support host ipmi\n", dmistr);
+ return 0;
+ }
+ /* END RHEL-only */
+#endif
+
while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev)))
dmi_decode_ipmi((const struct dmi_header *) dev->device_data);
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 737c0b6b24ea..7901e780323b 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -34,6 +34,7 @@
#include <linux/uuid.h>
#include <linux/nospec.h>
#include <linux/vmalloc.h>
+#include <linux/dmi.h>
#define IPMI_DRIVER_VERSION "39.2"
@@ -5153,8 +5154,21 @@ static int __init ipmi_init_msghandler_mod(void)
{
int rv;
- pr_info("version " IPMI_DRIVER_VERSION "\n");
+#ifdef CONFIG_ARM64
+ /* RHEL-only
+ * If this is ARM-based HPE m400, return now, because that platform
+ * reports the host-side ipmi address as intel port-io space, which
+ * does not exist in the ARM architecture.
+ */
+ const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+ pr_debug("%s does not support host ipmi\n", dmistr);
+ return -ENOSYS;
+ }
+ /* END RHEL-only */
+#endif
+ pr_info("version " IPMI_DRIVER_VERSION "\n");
mutex_lock(&ipmi_interfaces_mutex);
rv = ipmi_register_driver();
mutex_unlock(&ipmi_interfaces_mutex);
--
2.28.0

View File

@ -1,214 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Myron Stowe <myron.stowe@redhat.com>
Date: Fri, 29 Jun 2018 20:05:41 -0400
Subject: [PATCH] kABI: Add generic kABI macros to use for kABI workarounds
Message-id: <20180629200436.151355.18581.stgit@tak.stowe>
Patchwork-id: 223206
O-Subject: [RHEL8.0 PATCH v3] kABI: Add generic kABI macros to use for kABI workarounds
Bugzilla: 1546831
RH-Acked-by: Larry Woodman <lwoodman@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
Some kernel subsystem maintainers have asked about kABI for RHEL8.0
- getting kABI related "extension" structures and such into place. The
consensus was to wait until the 4.17 re-base. Now that that's occurred,
lets get this first step, kABI macros, into RHEL8.0 so developers will
notice, and use, them in subsequent kABI related efforts.
Content taken from RHEL 7. No functional change intended.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1546831
Brew: https://brewweb.devel.redhat.com/taskinfo?taskID=16694565
Upstream Status: N/A (RHEL only)
Testing: Passed through brew build.
Upstream Status: RHEL only
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
include/linux/rh_kabi.h | 172 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 172 insertions(+)
create mode 100644 include/linux/rh_kabi.h
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
new file mode 100644
index 000000000000..e0d3353802bb
--- /dev/null
+++ b/include/linux/rh_kabi.h
@@ -0,0 +1,172 @@
+/*
+ * rh_kabi.h - Red Hat kABI abstraction header
+ *
+ * Copyright (c) 2014 Don Zickus
+ * Copyright (c) 2015-2017 Jiri Benc
+ * Copyright (c) 2015 Sabrina Dubroca, Hannes Frederic Sowa
+ * Copyright (c) 2016-2018 Prarit Bhargava
+ * Copyright (c) 2017 Paolo Abeni, Larry Woodman
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ *
+ * These kabi macros hide the changes from the kabi checker and from the
+ * process that computes the exported symbols' checksums.
+ * They have 2 variants: one (defined under __GENKSYMS__) used when
+ * generating the checksums, and the other used when building the kernel's
+ * binaries.
+ *
+ * The use of these macros does not guarantee that the usage and modification
+ * of code is correct. As with all Red Hat only changes, an engineer must
+ * explain why the use of the macro is valid in the patch containing the
+ * changes.
+ *
+ */
+
+#ifndef _LINUX_RH_KABI_H
+#define _LINUX_RH_KABI_H
+
+#include <linux/compiler.h>
+#include <linux/stringify.h>
+
+/*
+ * RH_KABI_CONST
+ * Adds a new const modifier to a function parameter preserving the old
+ * checksum.
+ *
+ * RH_KABI_DEPRECATE
+ * Mark the element as deprecated and make it unusable by modules while
+ * preserving kABI checksums.
+ *
+ * RH_KABI_DEPRECATE_FN
+ * Mark the function pointer as deprecated and make it unusable by modules
+ * while preserving kABI checksums.
+ *
+ * RH_KABI_EXTEND
+ * Simple macro for adding a new element to a struct.
+ *
+ * Warning: only use if a hole exists for _all_ arches. Use pahole to verify.
+ *
+ * RH_KABI_FILL_HOLE
+ * Simple macro for filling a hole in a struct.
+ *
+ * RH_KABI_RENAME
+ * Simple macro for renaming an element without changing its type. This
+ * macro can be used in bitfields, for example.
+ *
+ * NOTE: does not include the final ';'
+ *
+ * RH_KABI_REPLACE
+ * Simple replacement of _orig with a union of _orig and _new.
+ *
+ * The RH_KABI_REPLACE* macros attempt to add the ability to use the '_new'
+ * element while preserving size alignment with the '_orig' element.
+ *
+ * The #ifdef __GENKSYMS__ preserves the kABI agreement, while the anonymous
+ * union structure preserves the size alignment (assuming the '_new' element
+ * is not bigger than the '_orig' element).
+ *
+ * RH_KABI_REPLACE_UNSAFE
+ * Unsafe version of RH_KABI_REPLACE. Only use for typedefs.
+ *
+ * RH_KABI_FORCE_CHANGE
+ * Force change of the symbol checksum. The argument of the macro is a
+ * version for cases we need to do this more than once.
+ *
+ * This macro does the opposite: it changes the symbol checksum without
+ * actually changing anything about the exported symbol. It is useful for
+ * symbols that are not whitelisted, we're changing them in an
+ * incompatible way and want to prevent 3rd party modules to silently
+ * corrupt memory. Instead, by changing the symbol checksum, such modules
+ * won't be loaded by the kernel. This macro should only be used as a
+ * last resort when all other KABI workarounds have failed.
+ *
+ * NOTE
+ * Don't use ';' after these macros as it messes up the kABI checker by
+ * changing what the resulting token string looks like. Instead let this
+ * macro add the ';' so it can be properly hidden from the kABI checker
+ * (mainly for RH_KABI_EXTEND, but applied to all macros for uniformity).
+ *
+ */
+#ifdef __GENKSYMS__
+
+# define RH_KABI_CONST
+# define RH_KABI_EXTEND(_new)
+# define RH_KABI_FILL_HOLE(_new)
+# define RH_KABI_FORCE_CHANGE(ver) __attribute__((rh_kabi_change ## ver))
+# define RH_KABI_RENAME(_orig, _new) _orig
+
+# define _RH_KABI_DEPRECATE(_type, _orig) _type _orig
+# define _RH_KABI_DEPRECATE_FN(_type, _orig, _args...) _type (*_orig)(_args)
+# define _RH_KABI_REPLACE(_orig, _new) _orig
+# define _RH_KABI_REPLACE_UNSAFE(_orig, _new) _orig
+
+#else
+
+# define RH_KABI_ALIGN_WARNING ". Disable CONFIG_RH_KABI_SIZE_ALIGN_CHECKS if debugging."
+
+# define RH_KABI_CONST const
+# define RH_KABI_EXTEND(_new) _new;
+# define RH_KABI_FILL_HOLE(_new) _new;
+# define RH_KABI_FORCE_CHANGE(ver)
+# define RH_KABI_RENAME(_orig, _new) _new
+
+
+#if IS_BUILTIN(CONFIG_RH_KABI_SIZE_ALIGN_CHECKS)
+# define __RH_KABI_CHECK_SIZE_ALIGN(_orig, _new) \
+ union { \
+ _Static_assert(sizeof(struct{_new;}) <= sizeof(struct{_orig;}), \
+ __FILE__ ":" __stringify(__LINE__) ": " __stringify(_new) " is larger than " __stringify(_orig) RH_KABI_ALIGN_WARNING); \
+ _Static_assert(__alignof__(struct{_new;}) <= __alignof__(struct{_orig;}), \
+ __FILE__ ":" __stringify(__LINE__) ": " __stringify(_orig) " is not aligned the same as " __stringify(_new) RH_KABI_ALIGN_WARNING); \
+ }
+#else
+# define __RH_KABI_CHECK_SIZE_ALIGN(_orig, _new)
+#endif
+
+# define _RH_KABI_DEPRECATE(_type, _orig) _type rh_reserved_##_orig
+# define _RH_KABI_DEPRECATE_FN(_type, _orig, _args...) \
+ _type (* rh_reserved_##_orig)(_args)
+# define _RH_KABI_REPLACE(_orig, _new) \
+ union { \
+ _new; \
+ struct { \
+ _orig; \
+ } __UNIQUE_ID(rh_kabi_hide); \
+ __RH_KABI_CHECK_SIZE_ALIGN(_orig, _new); \
+ }
+# define _RH_KABI_REPLACE_UNSAFE(_orig, _new) _new
+
+#endif /* __GENKSYMS__ */
+
+/* semicolon added wrappers for the RH_KABI_REPLACE macros */
+# define RH_KABI_DEPRECATE(_type, _orig) _RH_KABI_DEPRECATE(_type, _orig);
+# define RH_KABI_DEPRECATE_FN(_type, _orig, _args...) \
+ _RH_KABI_DEPRECATE_FN(_type, _orig, _args);
+# define RH_KABI_REPLACE(_orig, _new) _RH_KABI_REPLACE(_orig, _new);
+# define RH_KABI_REPLACE_UNSAFE(_orig, _new) _RH_KABI_REPLACE_UNSAFE(_orig, _new);
+/*
+ * Macro for breaking up a random element into two smaller chunks using an
+ * anonymous struct inside an anonymous union.
+ */
+# define RH_KABI_REPLACE2(orig, _new1, _new2) RH_KABI_REPLACE(orig, struct{ _new1; _new2;})
+
+# define RH_KABI_RESERVE(n) _RH_KABI_RESERVE(n);
+/*
+ * Simple wrappers to replace standard Red Hat reserved elements.
+ */
+# define RH_KABI_USE(n, _new) RH_KABI_REPLACE(_RH_KABI_RESERVE(n), _new)
+/*
+ * Macros for breaking up a reserved element into two smaller chunks using
+ * an anonymous struct inside an anonymous union.
+ */
+# define RH_KABI_USE2(n, _new1, _new2) RH_KABI_REPLACE(_RH_KABI_RESERVE(n), struct{ _new1; _new2; })
+
+/*
+ * We tried to standardize on Red Hat reserved names. These wrappers
+ * leverage those common names making it easier to read and find in the
+ * code.
+ */
+# define _RH_KABI_RESERVE(n) unsigned long rh_reserved##n
+
+#endif /* _LINUX_RH_KABI_H */
--
2.28.0

View File

@ -1,189 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Tue, 23 Jul 2019 15:24:30 +0000
Subject: [PATCH] kdump: add support for crashkernel=auto
Rebased for v5.3-rc1 because the documentation has moved.
Message-id: <20180604013831.574215750@redhat.com>
Patchwork-id: 8166
O-Subject: [kernel team] [PATCH RHEL8.0 V2 2/2] kdump: add support for crashkernel=auto
Bugzilla: 1507353
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Baoquan He <bhe@redhat.com>
RH-Acked-by: Pingfan Liu <piliu@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1507353
Build: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16534135
Tested: ppc64le, x86_64 with several memory sizes.
kdump qe tested 160M on various x86 machines in lab.
We continue to provide crashkernel=auto like we did in RHEL6
and RHEL7, this will simplify the kdump deployment for common
use cases that kdump just works with the auto reserved values.
But this is still a best effort estimation, we can not know the
exact memory requirement because it depends on a lot of different
factors.
The implementation of crashkernel=auto is simplified as a wrapper
to use below kernel cmdline:
x86_64: crashkernel=1G-64G:160M,64G-1T:256M,1T-:512M
s390x: crashkernel=4G-64G:160M,64G-1T:256M,1T-:512M
arm64: crashkernel=2G-:512M
ppc64: crashkernel=2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G
The difference between this way and the old implementation in
RHEL6/7 is we do not scale the crash reserved memory size according
to system memory size anymore.
Latest effort to move upstream is below thread:
https://lkml.org/lkml/2018/5/20/262
But unfortunately it is still unlikely to be accepted, thus we
will still use a RHEL only patch in RHEL8.
Copied old patch description about the history reason see below:
'''
Non-upstream explanations:
Besides "crashkenrel=X@Y" format, upstream also has advanced
"crashkernel=range1:size1[,range2:size2,...][@offset]", and
"crashkernel=X,high{low}" formats, but they need more careful
manual configuration, and have different values for different
architectures.
Most of the distributions use the standard "crashkernel=X@Y"
upstream format, and use crashkernel range format for advanced
scenarios, heavily relying on the user's involvement.
While "crashkernel=auto" is redhat's special feature, it exists
and has been used as the default boot cmdline since 2008 rhel6.
It does not require users to figure out how many crash memory
size for their systems, also has been proved to be able to work
pretty well for common scenarios.
"crashkernel=auto" was tested/based on rhel-related products, as
we have stable kernel configurations which means more or less
stable memory consumption. In 2014 we tried to post them again to
upstream but NACKed by people because they think it's not general
and unnecessary, users can specify their own values or do that by
scripts. However our customers insist on having it added to rhel.
Also see one previous discussion related to this backport to Pegas:
On 10/17/2016 at 10:15 PM, Don Zickus wrote:
> On Fri, Oct 14, 2016 at 10:57:41AM +0800, Dave Young wrote:
>> Don, agree with you we should evaluate them instead of just inherit
>> them blindly. Below is what I think about kdump auto memory:
>> There are two issues for crashkernel=auto in upstream:
>> 1) It will be seen as a policy which should not go to kernel
>> 2) It is hard to get a good number for the crash reserved size,
>> considering various different kernel config options one can setups.
>> In RHEL we are easier because our supported Kconfig is limited.
>> I digged the upstream mail archive, but I'm not sure I got all the
>> information, at least Michael Ellerman was objecting the series for
>> 1).
> Yes, I know. Vivek and I have argued about this for years. :-)
>
> I had hoped all the changes internally to the makedumpfile would allow
> the memory configuration to stabilize at a number like 192M or 128M and
> only in the rare cases extend beyond that.
>
> So I always treated that as a temporary hack until things were better.
> With the hope of every new RHEL release we get smarter and better. :-)
> Ideally it would be great if we could get the number down to 64M for most
> cases and just turn it on in Fedora. Maybe someday.... ;-)
>
> We can have this conversation when the patch gets reposted/refreshed
> for upstream on rhkl?
>
> Cheers,
> Don
We had proposed to drop the historic crashkernel=auto code and move
to use crashkernel=range:size format and pass them in anaconda.
The initial reason is crashkernel=range:size works just fine because
we do not need complex algorithm to scale crashkernel reserved size
any more. The old linear scaling is mainly for old makedumpfile
requirements, now it is not necessary.
But With the new approach, backward compatibility is potentially at risk.
For e.g. let's consider the following cases:
1) When we upgrade from an older distribution like rhel-alt-7.4(which
uses crashkernel=auto) to rhel-alt-7.5 (which uses the crashkernel=xY
format)
In this case we can use anaconda scripts for checking
'crashkernel=auto' in kernel spec and update to the new
'crashkernel=range:size' format.
2) When we upgrade from rhel-alt-7.5(which uses crashkernel=xY format)
to rhel-alt-7.6(which uses crashkernel=xY format), but the x and/or Y
values are changed in rhel-alt-7.6.
For example from crashkernel=2G-:160M to crashkernel=2G-:192M, then we have
no way to determine if the X and/or Y values were distribution
provided or user specified ones.
Since it is recommended to give precedence to user-specified values,
so we cannot do an upgrade in such a case."
Thus turn back to resolve it in kernel, and add a simpler version
which just hacks to use the range:size style in code, and make
rhel-only code easily to maintain.
'''
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
Documentation/admin-guide/kdump/kdump.rst | 11 +++++++++++
kernel/crash_core.c | 14 ++++++++++++++
2 files changed, 25 insertions(+)
diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index 2da65fef2a1c..d53a524f80f0 100644
--- a/Documentation/admin-guide/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
@@ -285,6 +285,17 @@ This would mean:
2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
3) if the RAM size is larger than 2G, then reserve 128M
+Or you can use crashkernel=auto if you have enough memory. The threshold
+is 2G on x86_64, arm64, ppc64 and ppc64le. The threshold is 4G for s390x.
+If your system memory is less than the threshold crashkernel=auto will not
+reserve memory.
+
+The automatically reserved memory size varies based on architecture.
+The size changes according to system memory size like below:
+ x86_64: 1G-64G:160M,64G-1T:256M,1T-:512M
+ s390x: 4G-64G:160M,64G-1T:256M,1T-:512M
+ arm64: 2G-:512M
+ ppc64: 2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G
Boot into System Kernel
diff --git a/kernel/crash_core.c b/kernel/crash_core.c
index e4dfe2a05a31..8c6f59932247 100644
--- a/kernel/crash_core.c
+++ b/kernel/crash_core.c
@@ -258,6 +258,20 @@ static int __init __parse_crashkernel(char *cmdline,
if (suffix)
return parse_crashkernel_suffix(ck_cmdline, crash_size,
suffix);
+
+ if (strncmp(ck_cmdline, "auto", 4) == 0) {
+#ifdef CONFIG_X86_64
+ ck_cmdline = "1G-64G:160M,64G-1T:256M,1T-:512M";
+#elif defined(CONFIG_S390)
+ ck_cmdline = "4G-64G:160M,64G-1T:256M,1T-:512M";
+#elif defined(CONFIG_ARM64)
+ ck_cmdline = "2G-:512M";
+#elif defined(CONFIG_PPC64)
+ ck_cmdline = "2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G";
+#endif
+ pr_info("Using crashkernel=auto, the size choosed is a best effort estimation.\n");
+ }
+
/*
* if the commandline contains a ':', then that's the extended
* syntax -- if not, it must be the classic syntax
--
2.28.0

View File

@ -1,43 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Dave Young <dyoung@redhat.com>
Date: Tue, 12 Jun 2018 00:54:22 -0400
Subject: [PATCH] kdump: fix a grammar issue in a kernel message
Message-id: <20180612005422.GA2568@dhcp-128-65.nay.redhat.com>
Patchwork-id: 8201
O-Subject: [kernel team] [RHEL8.0 PATCH V2] kdump: fix a grammar issue in a kernel message
Bugzilla: 1507353
RH-Acked-by: Myron Stowe <mstowe@redhat.com>
RH-Acked-by: Laszlo Ersek <lersek@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1507353
Upstream Status: RHEL-only as crashkernel=auto is not accepted in upstream
Build: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16661950
Test: verified on a kvm guest
s/choosed/chosen
Upstream Status: RHEL only
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
kernel/crash_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/crash_core.c b/kernel/crash_core.c
index 8c6f59932247..598d8324f51a 100644
--- a/kernel/crash_core.c
+++ b/kernel/crash_core.c
@@ -269,7 +269,7 @@ static int __init __parse_crashkernel(char *cmdline,
#elif defined(CONFIG_PPC64)
ck_cmdline = "2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G";
#endif
- pr_info("Using crashkernel=auto, the size choosed is a best effort estimation.\n");
+ pr_info("Using crashkernel=auto, the size chosen is a best effort estimation.\n");
}
/*
--
2.28.0

View File

@ -1,93 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Dave Young <dyoung@redhat.com>
Date: Mon, 4 Jun 2018 01:38:25 -0400
Subject: [PATCH] kdump: round up the total memory size to 128M for crashkernel
reservation
Message-id: <20180604013831.523644967@redhat.com>
Patchwork-id: 8165
O-Subject: [kernel team] [PATCH RHEL8.0 V2 1/2] kdump: round up the total memory size to 128M for crashkernel reservation
Bugzilla: 1507353
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Baoquan He <bhe@redhat.com>
RH-Acked-by: Pingfan Liu <piliu@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1507353
Build: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16534135
Tested: ppc64le, x86_64 with several memory sizes.
The total memory size we get in kernel is usually slightly less than 2G with
2G memory module machine. The main reason is bios/firmware reserve some area
it will not export all memory as usable to Linux.
2G memory X86 kvm guest test result of the total_mem value:
UEFI boot with ovmf: 0x7ef10000
Legacy boot kvm guest: 0x7ff7cc00
This is also a problem on arm64 UEFI booted system according to my test.
Thus for example crashkernel=1G-2G:128M, if we have a 1G memory
machine, we get total size 1023M from firmware then it will not fall
into 1G-2G thus no memory reserved. User will never know that, it is
hard to let user to know the exact total value we get in kernel
An option is to use dmi/smbios to get physical memory size, but it's not
reliable as well. According to Prarit hardware vendors sometimes screw this up.
Thus round up total size to 128M to workaround this problem.
Posted below patch in upstream, but no response yet:
http://lists.infradead.org/pipermail/kexec/2018-April/020568.html
Upstream Status: RHEL only
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
kernel/crash_core.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/kernel/crash_core.c b/kernel/crash_core.c
index 18175687133a..e4dfe2a05a31 100644
--- a/kernel/crash_core.c
+++ b/kernel/crash_core.c
@@ -7,6 +7,7 @@
#include <linux/crash_core.h>
#include <linux/utsname.h>
#include <linux/vmalloc.h>
+#include <linux/sizes.h>
#include <asm/page.h>
#include <asm/sections.h>
@@ -39,6 +40,15 @@ static int __init parse_crashkernel_mem(char *cmdline,
unsigned long long *crash_base)
{
char *cur = cmdline, *tmp;
+ unsigned long long total_mem = system_ram;
+
+ /*
+ * Firmware sometimes reserves some memory regions for it's own use.
+ * so we get less than actual system memory size.
+ * Workaround this by round up the total size to 128M which is
+ * enough for most test cases.
+ */
+ total_mem = roundup(total_mem, SZ_128M);
/* for each entry of the comma-separated list */
do {
@@ -83,13 +93,13 @@ static int __init parse_crashkernel_mem(char *cmdline,
return -EINVAL;
}
cur = tmp;
- if (size >= system_ram) {
+ if (size >= total_mem) {
pr_warn("crashkernel: invalid size\n");
return -EINVAL;
}
/* match ? */
- if (system_ram >= start && system_ram < end) {
+ if (total_mem >= start && total_mem < end) {
*crash_size = size;
break;
}
--
2.28.0

View File

@ -1,53 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Tomas Henzl <thenzl@redhat.com>
Date: Thu, 9 Aug 2018 13:44:15 -0400
Subject: [PATCH] kernel: add SUPPORT_REMOVED kernel taint
Message-id: <e9a9812a-6a4c-a205-e66a-1d47de58306a@redhat.com>
Patchwork-id: 226423
O-Subject: [RHEL-8.0 V4 01/10] kernel: add SUPPORT_REMOVED kernel taint
Bugzilla: 1602033
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
RH-Acked-by: Rob Evers <revers@redhat.com>
Upstream Status: RHEL only
rh_taint, pci : add information about removed hardware
Upstream Status: RHEL only
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
include/linux/kernel.h | 2 +-
kernel/panic.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 3ab563aa9e64..b40d76529ddd 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -614,7 +614,7 @@ extern enum system_states {
#define TAINT_24 24
#define TAINT_25 25
#define TAINT_26 26
-#define TAINT_27 27
+#define TAINT_SUPPORT_REMOVED 27
/* Bits 28 - 31 are reserved for Red Hat use only */
#define TAINT_RESERVED28 28
#define TAINT_RESERVED29 29
diff --git a/kernel/panic.c b/kernel/panic.c
index e3bae852d92f..8ab004b0f846 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -395,7 +395,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = {
[ TAINT_24 ] = { '?', '-', false },
[ TAINT_25 ] = { '?', '-', false },
[ TAINT_26 ] = { '?', '-', false },
- [ TAINT_27 ] = { '?', '-', false },
+ [ TAINT_SUPPORT_REMOVED ] = { 'h', ' ', false },
[ TAINT_RESERVED28 ] = { '?', '-', false },
[ TAINT_RESERVED29 ] = { '?', '-', false },
[ TAINT_RESERVED30 ] = { '?', '-', false },
--
2.28.0

View File

@ -1,47 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Tomas Henzl <thenzl@redhat.com>
Date: Thu, 2 Jan 2020 14:24:37 -0500
Subject: [PATCH] megaraid_sas: remove deprecated pci-ids
Message-id: <20180403143030.4971-2-thenzl@redhat.com>
Patchwork-id: 7432
O-Subject: [kernel team] [RHEL8 e-stor PATCH] megaraid_sas: remove deprecated pci-ids
Bugzilla: 1509329
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Chris Leech <cleech@redhat.com>
bz#1509329
brew - task_15594743
RH specific - remove EOL devices from the pci-id table
(devices to remove were selected by Broadcom)
Upstream Status: RHEL only
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 861f7140f52e..8c08ca7954a4 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -133,6 +133,7 @@ static void megasas_get_pd_info(struct megasas_instance *instance,
*/
static struct pci_device_id megasas_pci_table[] = {
+#ifndef CONFIG_RHEL_DIFFERENCES
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)},
/* xscale IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)},
@@ -151,6 +152,7 @@ static struct pci_device_id megasas_pci_table[] = {
/* xscale IOP, vega */
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
/* xscale IOP */
+#endif
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FUSION)},
/* Fusion */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_PLASMA)},
--
2.28.0

View File

@ -1,71 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Murphy Zhou <jencce.kernel@gmail.com>
Date: Sun, 29 Sep 2019 17:56:59 +0800
Subject: [PATCH] mm/kmemleak: skip late_init if not skip disable
Now if DEFAULT_OFF set to y, kmemleak_init will start the cleanup_work
workqueue. Then late_init call will set kmemleak_initialized to 1, the
cleaup workqueue will try to do cleanup, triggering:
[24.738773] ==================================================================
[24.742784] BUG: KASAN: global-out-of-bounds in __kmemleak_do_cleanup+0x166/0x180
[24.744144] Key type ._fscrypt registered
[24.745680] Read of size 8 at addr ffffffff88746c90 by task kworker/3:1/171
[24.745687]
[24.745697] CPU: 3 PID: 171 Comm: kworker/3:1 Not tainted 5.3.0-v5.3-12475-gcbafe18 #1
[24.745701] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[24.745710] Workqueue: events kmemleak_do_cleanup
[24.745717] Call Trace:
[24.745736] dump_stack+0x7c/0xc0
[24.745755] print_address_description.constprop.4+0x1f/0x300
[24.751562] Key type .fscrypt registered
[24.754370] __kasan_report.cold.8+0x76/0xb2
[24.754388] ? __kmemleak_do_cleanup+0x166/0x180
[24.754407] kasan_report+0xe/0x20
[24.778543] __kmemleak_do_cleanup+0x166/0x180
[24.780795] process_one_work+0x919/0x17d0
[24.782929] ? pwq_dec_nr_in_flight+0x320/0x320
[24.785092] worker_thread+0x87/0xb40
[24.786948] ? __kthread_parkme+0xc3/0x190
[24.789217] ? process_one_work+0x17d0/0x17d0
[24.791414] kthread+0x333/0x3f0
[24.793031] ? kthread_create_worker_on_cpu+0xc0/0xc0
[24.795473] ret_from_fork+0x3a/0x50
[24.797303]
[24.798091] The buggy address belongs to the variable:
[24.800634] mem_pool_free_count+0x10/0x40
[24.802656]
[24.803434] Memory state around the buggy address:
[24.805793] ffffffff88746b80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[24.809177] ffffffff88746c00: 00 fa fa fa fa fa fa fa 00 00 fa fa fa fa fa fa
[24.812407] >ffffffff88746c80: 04 fa fa fa fa fa fa fa 00 00 fa fa fa fa fa fa
[24.815638] ^
[24.817372] ffffffff88746d00: 00 00 fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[24.820740] ffffffff88746d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[24.824021] ==================================================================
Fixes: c5665868183f ("mm: kmemleak: use the memory pool for early allocations")
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
---
mm/kmemleak.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index e362dc3d2028..0c3dfb8eef67 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1958,6 +1958,11 @@ void __init kmemleak_init(void)
*/
static int __init kmemleak_late_init(void)
{
+ if (!kmemleak_skip_disable) {
+ kmemleak_disable();
+ return 0;
+ }
+
kmemleak_initialized = 1;
debugfs_create_file("kmemleak", 0644, NULL, NULL, &kmemleak_fops);
--
2.28.0

View File

@ -1,151 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Mon, 7 Jan 2019 21:03:10 +0000
Subject: [PATCH] modules: add rhelversion MODULE_INFO tag
There were several changes in the 5.0-rc1 kernel that required
this patch to be rebased with some context diff.
Patchwork-id: 7379
O-Subject: [kernel team] [RHEL8.0 BZ 1544999 1/2] modules: add rhelversion MODULE_INFO tag
Bugzilla: 1544999
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Oleg Nesterov <oleg@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1544999
kernel-alt commit 9816b4b6ca5d4c0504d8806ce99442c90afbc8e6
Author: Prarit Bhargava <prarit@redhat.com>
Date: Fri Feb 9 18:09:26 2018 -0500
[kernel] modules: add rhelversion MODULE_INFO tag
Message-id: <20180209180926.5955-3-prarit@redhat.com>
Patchwork-id: 205587
O-Subject: [RHEL-ALT-7.5 BZ 1542796 2/2] modules: add rhelversion MODULE_INFO tag
Bugzilla: 1542796
RH-Acked-by: David Arcari <darcari@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Steve Best <sbest@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1542796
rhel7 commit 9af8c3992ce5fff253c49abc0dedb3ec77badba4
Author: Kyle McMartin <kmcmarti@redhat.com>
Date: Fri Sep 12 17:46:12 2014 -0400
[kernel] modules: add rhelversion MODULE_INFO tag
Message-id: <20140912174612.GS29420@redacted.bos.redhat.com>
Patchwork-id: 94052
O-Subject: [RHEL7.1 PATCH 2/6 v4] modules: add rhelversion MODULE_INFO tag
Bugzilla: 1110315
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Johannes Weiner <jweiner@redhat.com>
RH-Acked-by: Don Zickus <dzickus@redhat.com>
From: Kyle McMartin <kmcmarti@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1110315
>From kylem's RHEL8 post:
Let's not lose this ability in RHEL8. Sadly can't be applied to RHEL7
because it breaks KABI due to the struct module change.
Inspired by bits of a147e4729d9920ccae2c717ca65c811cc0f93a1d in RHEL6,
which got lost for RHEL7.0. :/
Kyle is correct and doing this would break RHEL7's KABI. I'm taking this
patch in as a base and the next patch will resolve the KABI issues.
[v2]: dzickus, cleanup add_rhelversion()
[v4]: resubmitted along with 16k stacks change
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Cc: Peter Rajnoha <prajnoha@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
---
include/linux/module.h | 1 +
kernel/module.c | 2 ++
scripts/mod/modpost.c | 8 ++++++++
3 files changed, 11 insertions(+)
diff --git a/include/linux/module.h b/include/linux/module.h
index 2e6670860d27..8c35a5db7d7e 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -371,6 +371,7 @@ struct module {
struct module_attribute *modinfo_attrs;
const char *version;
const char *srcversion;
+ const char *rhelversion;
struct kobject *holders_dir;
/* Exported symbols */
diff --git a/kernel/module.c b/kernel/module.c
index 8fa2600bde6a..263e654f6212 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -802,6 +802,7 @@ static struct module_attribute modinfo_##field = { \
MODINFO_ATTR(version);
MODINFO_ATTR(srcversion);
+MODINFO_ATTR(rhelversion);
static char last_unloaded_module[MODULE_NAME_LEN+1];
@@ -1266,6 +1267,7 @@ static struct module_attribute *modinfo_attrs[] = {
&module_uevent,
&modinfo_version,
&modinfo_srcversion,
+ &modinfo_rhelversion,
&modinfo_initstate,
&modinfo_coresize,
&modinfo_initsize,
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 69341b36f271..dbc63328187c 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -21,6 +21,7 @@
#include <errno.h>
#include "modpost.h"
#include "../../include/linux/license.h"
+#include "../../include/generated/uapi/linux/version.h"
/* Are we using CONFIG_MODVERSIONS? */
static int modversions = 0;
@@ -2393,6 +2394,12 @@ static void write_buf(struct buffer *b, const char *fname)
}
}
+static void add_rhelversion(struct buffer *b, struct module *mod)
+{
+ buf_printf(b, "MODULE_INFO(rhelversion, \"%d.%d\");\n", RHEL_MAJOR,
+ RHEL_MINOR);
+}
+
static void write_if_changed(struct buffer *b, const char *fname)
{
char *tmp;
@@ -2645,6 +2652,7 @@ int main(int argc, char **argv)
add_depends(&buf, mod);
add_moddevtable(&buf, mod);
add_srcversion(&buf, mod);
+ add_rhelversion(&buf, mod);
sprintf(fname, "%s.mod.c", mod->name);
write_if_changed(&buf, fname);
--
2.28.0

View File

@ -1,71 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Thu, 2 Jan 2020 14:24:36 -0500
Subject: [PATCH] mpt*: remove certain deprecated pci-ids
Message-id: <20190708192032.20922-1-jcline@redhat.com>
Patchwork-id: 266421
O-Subject: [ARK INTERNAL PATCH] mpt*: remove certain deprecated pci-ids
Bugzilla:
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
Commit 8f8384503e40 ("scsi: mpt3sas: Add support for NVMe Switch
Adapter") introduced a new PCI device ID which broke the patch context.
Message-id: <20180403143030.4971-1-thenzl@redhat.com>
Patchwork-id: 7431
O-Subject: [kernel team] [RHEL8 e-stor PATCH] mpt*: remove certain deprecated pci-ids
Bugzilla: 1511953
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Chris Leech <cleech@redhat.com>
bz#1511953
brew - task_15594743
RH specific - remove EOL devices from the pci-id table
(devices to remove were selected by Broadcom)
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 08fc4b381056..1305a2b72536 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -11033,6 +11033,7 @@ bool scsih_ncq_prio_supp(struct scsi_device *sdev)
* The pci device ids are defined in mpi/mpi2_cnfg.h.
*/
static const struct pci_device_id mpt3sas_pci_table[] = {
+#ifndef CONFIG_RHEL_DIFFERENCES
/* Spitfire ~ 2004 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
PCI_ANY_ID, PCI_ANY_ID },
@@ -11051,6 +11052,7 @@ static const struct pci_device_id mpt3sas_pci_table[] = {
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
PCI_ANY_ID, PCI_ANY_ID },
+#endif
/* Thunderbolt ~ 2208 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
PCI_ANY_ID, PCI_ANY_ID },
@@ -11075,9 +11077,11 @@ static const struct pci_device_id mpt3sas_pci_table[] = {
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP_1,
PCI_ANY_ID, PCI_ANY_ID },
+#ifndef CONFIG_RHEL_DIFFERENCES
/* SSS6200 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
PCI_ANY_ID, PCI_ANY_ID },
+#endif
/* Fury ~ 3004 and 3008 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
PCI_ANY_ID, PCI_ANY_ID },
--
2.28.0

View File

@ -1,51 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Thu, 2 Jan 2020 14:24:46 -0500
Subject: [PATCH] mptsas: Taint kernel if mptsas is loaded
Author: Tomas Henzl <thenzl@redhat.com>
Date: Thu Jan 31 16:54:50 2019 -0500
[message] mptsas: Taint kernel if mptsas is loaded
Message-id: <20190131165452.7562-2-thenzl@redhat.com>
Patchwork-id: 239764
O-Subject: [RHEL8 e-stor 1/3] mptsas: Taint kernel if mptsas is loaded
Bugzilla: 1666730
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RHEL-only
We are only keeping it to ease developer transitions, we're not
supporting it, so mark it as unsupported by tainting the kernel and
issuing an impossible to misunderstand message to the log
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
drivers/message/fusion/mptsas.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 6a79cd0ebe2b..c17614cd6ed8 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -5290,6 +5290,11 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT);
}
+#ifdef CONFIG_RHEL_DIFFERENCES
+ add_taint(TAINT_SUPPORT_REMOVED, LOCKDEP_STILL_OK);
+ pr_warn("MPTSAS MODULE IS NOT SUPPORTED\n");
+#endif
+
error = scsi_add_host(sh, &ioc->pcidev->dev);
if (error) {
dprintk(ioc, printk(MYIOC_s_ERR_FMT
--
2.28.0

View File

@ -1,58 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Thu, 2 Jan 2020 14:24:47 -0500
Subject: [PATCH] mptsas: pci-id table changes
Author: Tomas Henzl <thenzl@redhat.com>
Date: Thu Jan 31 16:54:51 2019 -0500
[message] mptsas: pci-id table changes
Message-id: <20190131165452.7562-3-thenzl@redhat.com>
Patchwork-id: 239765
O-Subject: [RHEL8 e-stor 2/3] mptsas: pci-id table changes
Bugzilla: 1666730
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RHEL-only
We want to provide this driver only for the virtualisation use case,
so we remove all other entries from the pci-id table and add only the
single entry needed for virtualisation.
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
drivers/message/fusion/mptsas.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index c17614cd6ed8..ca44a35ec411 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -5358,6 +5358,10 @@ static void mptsas_remove(struct pci_dev *pdev)
}
static struct pci_device_id mptsas_pci_table[] = {
+#ifdef CONFIG_RHEL_DIFFERENCES
+ { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068,
+ PCI_VENDOR_ID_VMWARE, PCI_ANY_ID },
+#else
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064,
PCI_ANY_ID, PCI_ANY_ID },
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068,
@@ -5370,6 +5374,7 @@ static struct pci_device_id mptsas_pci_table[] = {
PCI_ANY_ID, PCI_ANY_ID },
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP,
PCI_ANY_ID, PCI_ANY_ID },
+#endif
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, mptsas_pci_table);
--
2.28.0

View File

@ -1,51 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Thu, 2 Jan 2020 14:24:48 -0500
Subject: [PATCH] mptspi: Taint kernel if mptspi is loaded
Author: Tomas Henzl <thenzl@redhat.com>
Date: Thu Jan 10 16:11:43 2019 -0500
[message] mptspi: Taint kernel if mptspi is loaded
Message-id: <20190110161145.5117-2-thenzl@redhat.com>
Patchwork-id: 237188
O-Subject: [RHEL-8.0 e-stor 1/3] mptspi: Taint kernel if mptspi is loaded
Bugzilla: 1651803
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Chris Leech <cleech@redhat.com>
RHEL-only
We are only keeping it to ease developer transitions, we're not
supporting it, so mark it as unsupported by tainting the kernel and
issuing an impossible to misunderstand message to the log
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
drivers/message/fusion/mptspi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index eabc4de5816c..c028f5944694 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -1534,6 +1534,12 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
0, 0, 0, 0, 5);
scsi_scan_host(sh);
+
+#ifdef CONFIG_RHEL_DIFFERENCES
+ add_taint(TAINT_SUPPORT_REMOVED, LOCKDEP_STILL_OK);
+ pr_warn("MPTSPI MODULE IS NOT SUPPORTED\n");
+#endif
+
return 0;
out_mptspi_probe:
--
2.28.0

View File

@ -1,56 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Thu, 2 Jan 2020 14:24:45 -0500
Subject: [PATCH] mptspi: pci-id table changes
Author: Tomas Henzl <thenzl@redhat.com>
Date: Thu Jan 10 16:11:44 2019 -0500
[message] mptspi: pci-id table changes
Message-id: <20190110161145.5117-3-thenzl@redhat.com>
Patchwork-id: 237190
O-Subject: [RHEL-8.0 e-stor 2/3] mptspi: pci-id table changes
Bugzilla: 1651803
RH-Acked-by: Maurizio Lombardi <mlombard@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Chris Leech <cleech@redhat.com>
RHEL-only
We want to provide this driver only for the virtualisation use case,
so we remove all other entries from the pci-id table and add only the
single entry needed for virtualisation.
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
drivers/message/fusion/mptspi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index c028f5944694..1f458e35effb 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -1238,12 +1238,17 @@ static struct spi_function_template mptspi_transport_functions = {
*/
static struct pci_device_id mptspi_pci_table[] = {
+#ifdef CONFIG_RHEL_DIFFERENCES
+ { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030,
+ PCI_VENDOR_ID_VMWARE, PCI_ANY_ID },
+#else
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030,
PCI_ANY_ID, PCI_ANY_ID },
{ PCI_VENDOR_ID_ATTO, MPI_MANUFACTPAGE_DEVID_53C1030,
PCI_ANY_ID, PCI_ANY_ID },
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035,
PCI_ANY_ID, PCI_ANY_ID },
+#endif
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
--
2.28.0

View File

@ -1,82 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Mon, 7 Jan 2019 20:55:21 +0000
Subject: [PATCH] put RHEL info into generated headers
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1663728
Commit 43fee2b23895 ("kbuild: do not redirect the first prerequisite for
filechk") upstream introduced some context diff. This just fixes that up.
Bugzilla: http://bugzilla.redhat.com/1544999
kernel-alt commit b3bbf3db12b8a48491eb4175eae25eb907f092ac
Author: Prarit Bhargava <prarit@redhat.com>
Date: Fri Feb 9 18:09:25 2018 -0500
[kernel] put RHEL info into generated headers
Message-id: <20180209180926.5955-2-prarit@redhat.com>
Patchwork-id: 205585
O-Subject: [RHEL-ALT-7.5 BZ 1542796 1/2] put RHEL info into generated headers
Bugzilla: 1542796
RH-Acked-by: David Arcari <darcari@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Steve Best <sbest@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1542796
rhel7 commit 6199c642a685fba61a298901190659dbedb7c3c3
Author: Jarod Wilson <jarod@redhat.com>
Date: Thu Oct 10 20:14:33 2013 -0400
[redhat] put RHEL info into generated headers
Message-id: <1381436073-8850-1-git-send-email-jarod@redhat.com>
Patchwork-id: 69475
O-Subject: [RHEL7 PATCH] [redhat] put RHEL info into generated headers
Bugzilla:
RH-Acked-by: Neil Horman <nhorman@redhat.com>
RH-Acked-by: Rafael Aquini <aquini@redhat.com>
RH-Acked-by: Kyle McMartin <kmcmarti@redhat.com>
While glancing at the differences between RHEL6 and RHEL7's modifications to the
top-level Makefile, some discrepancies popped up... This brings RHEL7 in line
with all of the customizations we make in RHEL6 to get distro info propagated.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
---
Makefile | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 168dd19cad7c..b70997f7ddf9 100644
--- a/Makefile
+++ b/Makefile
@@ -1246,7 +1246,13 @@ endef
define filechk_version.h
echo \#define LINUX_VERSION_CODE $(shell \
expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
- echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
+ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
+ echo '#define RHEL_MAJOR $(RHEL_MAJOR)'; \
+ echo '#define RHEL_MINOR $(RHEL_MINOR)'; \
+ echo '#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b))'; \
+ echo '#define RHEL_RELEASE_CODE \
+ $(shell expr $(RHEL_MAJOR) \* 256 + $(RHEL_MINOR))'; \
+ echo '#define RHEL_RELEASE "$(RHEL_RELEASE)"'
endef
$(version_h): FORCE
--
2.28.0

View File

@ -1,79 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Thu, 2 Jan 2020 14:24:44 -0500
Subject: [PATCH] qla2xxx: Remove PCI IDs of deprecated adapter
Message-id: <20190708192223.21890-1-jcline@redhat.com>
Patchwork-id: 266422
O-Subject: [ARK INTERNAL PATCH] qla2xxx: Remove PCI IDs of deprecated adapter
Bugzilla:
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
Commit ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX")
introduced addition device IDs which broke the patch context.
Message-id: <20180503234750.33648-1-hmadhani@redhat.com>
Patchwork-id: 212501
O-Subject: [RHEL 8 e-stor PATCH v2] qla2xxx: Remove PCI IDs of deprecated adapter
Bugzilla: 1572233
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>
RH-Acked-by: Chris Leech <cleech@redhat.com>
RH-Acked-by: Tom Coughlan <coughlan@redhat.com>
Bugzilla:
======== https://bugzilla.redhat.com/show_bug.cgi?id72233
commit none
Brewbuild:
========== https://brewweb.engineering.redhat.com/brew/taskinfo?taskID977226
Tetsing:
======= N/A. PCI IDs are removed as part of this patch
Signed-off-by: Himanshu Madhani <hmadhani@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Note: Simplified backport to just pci-ids
---
drivers/scsi/qla2xxx/qla_os.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9b59f032a569..c27e39378aa9 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -7795,6 +7795,7 @@ static const struct pci_error_handlers qla2xxx_err_handler = {
};
static struct pci_device_id qla2xxx_pci_tbl[] = {
+#ifndef CONFIG_RHEL_DIFFERENCES
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
@@ -7807,13 +7808,18 @@ static struct pci_device_id qla2xxx_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
+#endif
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2031) },
+#ifndef CONFIG_RHEL_DIFFERENCES
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8021) },
+#endif
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8031) },
+#ifndef CONFIG_RHEL_DIFFERENCES
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISPF001) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8044) },
+#endif
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2071) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2271) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2261) },
--
2.28.0

View File

@ -1,56 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Chad Dupuis <cdupuis@redhat.com>
Date: Thu, 2 Jan 2020 14:24:39 -0500
Subject: [PATCH] qla4xxx: Remove deprecated PCI IDs from RHEL 8
Message-id: <1524063895-23086-1-git-send-email-cdupuis@redhat.com>
Patchwork-id: 209742
O-Subject: [RHEL 8 e-stor PATCH] qla4xxx: Remove depricated PCI IDs from RHEL 8.
Bugzilla: 1518874
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
Bugzilla: 1518874
RHEL 8 specific
Brew build: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID822250
Three PCI device IDs are marked as deprecated in RHEL 7:
PCI_DEVICE_ID_QLOGIC_ISP8022
PCI_DEVICE_ID_QLOGIC_ISP8324
PCI_DEVICE_ID_QLOGIC_ISP8042
This patch removes them from the PCI table in RHEL 8 so the
qla4xxx driver will not bind to the hardware.
Upstream Status: RHEL only
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/scsi/qla4xxx/ql4_os.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index bab87e47b238..70545ee26c9c 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -9868,6 +9868,7 @@ static struct pci_device_id qla4xxx_pci_tbl[] = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
+#ifndef CONFIG_RHEL_DIFFERENCES
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP8022,
@@ -9886,6 +9887,7 @@ static struct pci_device_id qla4xxx_pci_tbl[] = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
+#endif
{0, 0},
};
MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl);
--
2.28.0

View File

@ -1,50 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Mon, 13 Apr 2020 10:00:48 -0400
Subject: [PATCH] redhat: Replace hardware.redhat.com link in Unsupported
message
Resending ... did not get any reviews.
P.
---8<---
Bugzilla: http://bugzilla.redhat.com/1810301
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=27902812
Local Tree: git://git.engineering.redhat.com/users/prarit/rhel8 1810301
Upstream Status: RHEL only
For almost a decade, RHEL kernels have output the message
"this hardware has not undergone testing by Red Hat and might not be
certified. Please consult https://hardware.redhat.com for certified
hardware."
for unsupported hardware. This link should be now be updated to the
new catalog.redhat.com location. The old hardware.redhat.com is now
redirecting to catalog.redhat.com for older releases.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: David Arcari <darcari@redhat.com>
---
kernel/rh_taint.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/rh_taint.c b/kernel/rh_taint.c
index 8d1641710ed7..4050b6dead75 100644
--- a/kernel/rh_taint.c
+++ b/kernel/rh_taint.c
@@ -24,7 +24,7 @@
void mark_hardware_unsupported(const char *msg)
{
/* Print one single message */
- pr_crit("Warning: %s - this hardware has not undergone testing by Red Hat and might not be certified. Please consult https://hardware.redhat.com for certified hardware.\n", msg);
+ pr_crit("Warning: %s - this hardware has not undergone testing by Red Hat and might not be certified. Please consult https://catalog.redhat.com for certified hardware.\n", msg);
}
EXPORT_SYMBOL(mark_hardware_unsupported);
--
2.28.0

View File

@ -1,201 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Wed, 19 Feb 2020 11:52:16 +0100
Subject: [PATCH] redhat: rh_kabi: Add macros to size and extend structs
RH-Acked-by: Ivan Vecera <ivecera@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
Upstream: RHEL-only
As noted in the reviews, there are some areas of future work:
1) A further restriction on the access of the extended struct fields
would be to require the addition of an accessor function.
2) Additional macros to use RH_KABI_EXTEND fields.
3) Additional macros to mark extended struts' field for internal kernel
versus module use.
The RHEL7 code contains macros to extend kernel structs. For example, the
RH_KABI_EXTEND() can be used to extend a struct when used appropriately.
This macro (and others similar to it) has a significant shortcoming as it
cannot be used in the case where a struct is known to allocate the struct
within a 3rd party module. For example, in RHELX.0, suppose there exists
a struct,
struct in_kernel {
int foo0;
};
and an exported function,
void in_kernel_set_foo(struct in_kernel *ink)
{
...
ink->foo0 = 0xBA5EBA11;
...
}
Let's also suppose a struct in_kernel is statically defined within a 3rd
party module, or dynamically allocated as
struct in_kernel *3rd_party_ink;
...
ink = kmalloc(sizeof(*3rd_party_ink), GFP_KERNEL);
...
In RHELX.1, suppose the struct is expanded by
struct in_kernel {
int foo0;
RH_KABI_EXTEND(foo1)
};
and the exported function is modified as
void in_kernel_set_foo(struct in_kernel *ink)
{
...
ink->foo0 = 0xBA5EBA11;
ink->foo1 = 0xBA5EBA11;
...
}
The 3rd party module, compiled against RHELX.0, will not have allocated
memory for foo1, and in_kernel_set_foo() will reference garbage in memory.
To fix this problem, Jiri Benc came up with an great solution that should
be unified for all future RHELX.0 expansions of structs. RHEL7 commit
e33a3c136b56 ("[net] introduce net_device_ops_extended") adds a size
parameter to net_device_ops that can be queried to validate memory
accesses. In the patch, net_device_ops is expanded by embedding a
net_device_ops_extended struct and addig a size parameter. The size
parameter is used to compare the offset of a parameter in the
net_device_ops_extended struct to the size of the struct at compile time,
and if valid, the memory access can be programmatically allowed to occur.
I have taken his idea and created several new standard macros that allow
structs to be expanded by embedding a new struct or by adding a pointer
to a new struct.
There are, however, some rules that must be followed when using these
new macros:
1. The default name of the extended struct is ##name##_rh. For example,
pci_dev_rh, device_rh, net_device_ops_rh, etc.
2. _rh structs cannot be shrunk in size as such changes would break the
size & offset comparison.
3. The size field _must_ be set at the spot of allocation for use. Use of the
_rh fields without setting the size field via RH_KABI_SET_SIZE|_PTR() is
invalid in the kernel or in a 3rd party module.
4. These new macros do not preclude expansions like
struct in_kernel_rh {
};
struct in_kernel {
...
RH_KABI_EXTEND(void *ptr1)
RH_KABI_EXTEND(void *ptr2)
RH_KABI_EXTEND(void *ptr3)
RH_KABI_EXTEND(void *ptr4)
RH_KABI_SIZE_AND_EXTEND_PTR(in_kernel)
};
These macros are generally intended for pre-KABI freeze use, however,
there may be cases where these macros can be used post-KABI freeze.
Due to the design of RH_KABI_EXTEND() which embeds __GENKSYMS__ care must
be taken when using RH_KABI_SIZE_AND_EXTEND|_PTR() post-KABI freeze to
ensure that structs are not embedded within another struct, verifying
offsets, etc.
Add RH_KABI_SIZE_AND_EXTEND(), RH_KABI_SIZE_AND_EXTEND_PTR(), and
other macros that allow for safe expansion of structs.
v2: Cleanup comments.
v3: Cleanup comments.
Upstream Status: RHEL only
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
---
include/linux/rh_kabi.h | 64 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
index 87f2bd530df7..d551df994583 100644
--- a/include/linux/rh_kabi.h
+++ b/include/linux/rh_kabi.h
@@ -186,4 +186,68 @@
#define RH_KABI_EXCLUDE(_elem) _RH_KABI_EXCLUDE(_elem);
+/*
+ * RHEL macros to extend structs.
+ *
+ * base struct: The struct being extended. For example, pci_dev.
+ * extended struct: The Red Hat struct being added to the base struct.
+ * For example, pci_dev_rh.
+ *
+ * These macros should be used to extend structs before KABI freeze.
+ * They can be used post-KABI freeze in the limited case of the base
+ * struct not being embedded in another struct.
+ *
+ * Extended structs cannot be shrunk in size as changes will break
+ * the size & offset comparison.
+ *
+ * Extended struct elements are not guaranteed for access by modules unless
+ * explicitly commented as such in the declaration of the extended struct or
+ * the element in the extended struct.
+ */
+
+/*
+ * RH_KABI_SIZE_AND_EXTEND|_PTR() extends a struct by embedding or adding
+ * a pointer in a base struct. The name of the new struct is the name
+ * of the base struct appended with _rh.
+ */
+#define RH_KABI_SIZE_AND_EXTEND_PTR(_struct) \
+ size_t _struct##_size_rh; \
+ RH_KABI_EXCLUDE(struct _struct##_rh *_struct##_rh)
+
+#define RH_KABI_SIZE_AND_EXTEND(_struct) \
+ size_t _struct##_size_rh; \
+ RH_KABI_EXCLUDE(struct _struct##_rh _struct##_rh)
+
+/*
+ * RH_KABI_SET_SIZE calculates and sets the size of the extended struct and
+ * stores it in the size_rh field for structs that are dynamically allocated.
+ * This macro MUST be called when expanding a base struct with
+ * RH_KABI_SIZE_AND_EXTEND, and it MUST be called from the allocation site
+ * regardless of being allocated in the kernel or a module.
+ */
+#define RH_KABI_SET_SIZE(_name, _struct) ({ \
+ _name._struct##_size_rh = sizeof(struct _struct##_rh); \
+})
+
+/*
+ * RH_KABI_INIT_SIZE calculates and sets the size of the extended struct and
+ * stores it in the size_rh field for structs that are statically allocated.
+ * This macro MUST be called when expanding a base struct with
+ * RH_KABI_SIZE_AND_EXTEND, and it MUST be called from the declaration site
+ * regardless of being allocated in the kernel or a module.
+ */
+#define RH_KABI_INIT_SIZE(_struct) \
+ ._struct##_size_rh = sizeof(struct _struct##_rh),
+
+/*
+ * RH_KABI_CHECK_EXT verifies allocated memory exists. This MUST be called to
+ * verify that memory in the _rh struct is valid, and can be called
+ * regardless if RH_KABI_SIZE_AND_EXTEND or RH_KABI_SIZE_AND_EXTEND_PTR is
+ * used.
+ */
+#define RH_KABI_CHECK_EXT(_ptr, _struct, _field) ({ \
+ size_t __off = offsetof(struct _struct##_rh, _field); \
+ _ptr->_struct##_size_rh > __off ? true : false; \
+})
+
#endif /* _LINUX_RH_KABI_H */
--
2.28.0

View File

@ -1,47 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Tony Camuso <tcamuso@redhat.com>
Date: Wed, 19 Feb 2020 11:52:17 +0100
Subject: [PATCH] redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference
operator
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
Upstream Status: RHEL only
Since this macro is intended to record the sizeof extension structs that
are dynamically allocated, using the structure dereference operator '->'
is a better choice, else the macro would have to be invoked with the
_name argument dereferenced as (*_name).
Also added a short note explaining that, unlike the other RH_KABI
macros that are invoked from within structs, this macro is invoked
outside a struct and therefore needs a semicolon termination.
Upstream Status: RHEL only
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
---
include/linux/rh_kabi.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
index d551df994583..9a4fea93ad99 100644
--- a/include/linux/rh_kabi.h
+++ b/include/linux/rh_kabi.h
@@ -224,9 +224,11 @@
* This macro MUST be called when expanding a base struct with
* RH_KABI_SIZE_AND_EXTEND, and it MUST be called from the allocation site
* regardless of being allocated in the kernel or a module.
+ * Note: since this macro is intended to be invoked outside of a struct,
+ * a semicolon is necessary at the end of the line where it is invoked.
*/
#define RH_KABI_SET_SIZE(_name, _struct) ({ \
- _name._struct##_size_rh = sizeof(struct _struct##_rh); \
+ _name->_struct##_size_rh = sizeof(struct _struct##_rh); \
})
/*
--
2.28.0

View File

@ -1,50 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Don Dutile <ddutile@redhat.com>
Date: Wed, 19 Feb 2020 11:52:18 +0100
Subject: [PATCH] redhat: rh_kabi: Indirect EXTEND macros so nesting of other
macros will resolve.
RH-Acked-by: Neil Horman <nhorman@redhat.com>
RH-Acked-by: Jonathan Toppins <jtoppins@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
Upstream status: RHEL only
rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve.
Upstream Status: RHEL only
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
---
include/linux/rh_kabi.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
index 9a4fea93ad99..cdc636d3013d 100644
--- a/include/linux/rh_kabi.h
+++ b/include/linux/rh_kabi.h
@@ -210,13 +210,17 @@
* a pointer in a base struct. The name of the new struct is the name
* of the base struct appended with _rh.
*/
-#define RH_KABI_SIZE_AND_EXTEND_PTR(_struct) \
+#define _RH_KABI_SIZE_AND_EXTEND_PTR(_struct) \
size_t _struct##_size_rh; \
RH_KABI_EXCLUDE(struct _struct##_rh *_struct##_rh)
+#define RH_KABI_SIZE_AND_EXTEND_PTR(_struct) \
+ _RH_KABI_SIZE_AND_EXTEND_PTR(_struct)
-#define RH_KABI_SIZE_AND_EXTEND(_struct) \
+#define _RH_KABI_SIZE_AND_EXTEND(_struct) \
size_t _struct##_size_rh; \
RH_KABI_EXCLUDE(struct _struct##_rh _struct##_rh)
+#define RH_KABI_SIZE_AND_EXTEND(_struct) \
+ _RH_KABI_SIZE_AND_EXTEND(_struct)
/*
* RH_KABI_SET_SIZE calculates and sets the size of the extended struct and
--
2.28.0

View File

@ -1,67 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jiri Benc <jbenc@redhat.com>
Date: Wed, 19 Feb 2020 11:52:20 +0100
Subject: [PATCH] redhat: rh_kabi add a comment with warning about
RH_KABI_EXCLUDE usage
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Don Zickus <dzickus@redhat.com>
Upstream status: RHEL only
We've seen attempts of incorrect RH_KABI_EXCLUDE usage. The macro is
dangerous and any structure marked by it becomes fragile. It completely
mutes the kABI checker and a future attempt to whitelist anything using
a structure annotated by RH_KABI_EXCLUDE will generate easily broken, error
prone code. Also, it bypasses module loading checks for the structure and
can lead to kernel crashes triggered by 3rd party modules unless carefully
prevented by RH_KABI_FORCE_CHANGE.
As such, it should not be used routinely. The only valid usage is a code
heavily in flux upstream that is going to be refactored and turned upside
down, which is indirectly whitelisted and which we expect to need
backported.
Any usage of this macro requires deep understanding of how kABI works.
Add a big fat warning to stop the misuse.
Upstream Status: RHEL only
Signed-off-by: Jiri Benc <jbenc@redhat.com>
---
include/linux/rh_kabi.h | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
index 4debb7aaad48..b90601e8a657 100644
--- a/include/linux/rh_kabi.h
+++ b/include/linux/rh_kabi.h
@@ -2,7 +2,7 @@
* rh_kabi.h - Red Hat kABI abstraction header
*
* Copyright (c) 2014 Don Zickus
- * Copyright (c) 2015-2017 Jiri Benc
+ * Copyright (c) 2015-2018 Jiri Benc
* Copyright (c) 2015 Sabrina Dubroca, Hannes Frederic Sowa
* Copyright (c) 2016-2018 Prarit Bhargava
* Copyright (c) 2017 Paolo Abeni, Larry Woodman
@@ -93,7 +93,16 @@
* corrupt memory. Instead, by changing the symbol checksum, such modules
* won't be loaded by the kernel. This macro should only be used as a
* last resort when all other KABI workarounds have failed.
+ *
* RH_KABI_EXCLUDE
+ * !!! WARNING: DANGEROUS, DO NOT USE unless you are aware of all the !!!
+ * !!! implications. This should be used ONLY EXCEPTIONALLY and only !!!
+ * !!! under specific circumstances. Very likely, this macro does not !!!
+ * !!! do what you expect it to do. Note that any usage of this macro !!!
+ * !!! MUST be paired with a RH_KABI_FORCE_CHANGE annotation of !!!
+ * !!! a suitable symbol (or an equivalent safeguard) and the commit !!!
+ * !!! log MUST explain why the chosen solution is appropriate. !!!
+ *
* Exclude the element from checksum generation. Any such element is
* considered not to be part of the kABI whitelist and may be changed at
* will. Note however that it's the responsibility of the developer
--
2.28.0

View File

@ -1,65 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jiri Benc <jbenc@redhat.com>
Date: Wed, 19 Feb 2020 11:52:21 +0100
Subject: [PATCH] redhat: rh_kabi: deduplication friendly structs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
RH-Acked-by: Bruno Meneguele <bmeneg@redhat.com>
RH-Acked-by: Jesper Brouer <brouer@redhat.com>
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: Jiri Olsa <jolsa@redhat.com>
RH-Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Upstream status: RHEL only
We don't really need the field names to be globally unique, it is enough
when they are unique in the given struct. Since structs do not generally
span mutliple files, using the line number is enough to ensure an unique
identifier. It means that we can't use two RH_KABI_RENAME macros on the same
line but that's not happening anyway.
This allows pahole to deduplicate the type info of structs using kABI
macros, lowering the size of vmlinuz from 26M to 8.5M.
Upstream Status: RHEL only
Signed-off-by: Jiri Benc <jbenc@redhat.com>
---
include/linux/rh_kabi.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
index b90601e8a657..ea9c136bf884 100644
--- a/include/linux/rh_kabi.h
+++ b/include/linux/rh_kabi.h
@@ -163,6 +163,8 @@
# define __RH_KABI_CHECK_SIZE(_item, _size)
#endif
+#define RH_KABI_UNIQUE_ID __PASTE(rh_kabi_hidden_, __LINE__)
+
# define _RH_KABI_DEPRECATE(_type, _orig) _type rh_reserved_##_orig
# define _RH_KABI_DEPRECATE_FN(_type, _orig, _args...) \
_type (* rh_reserved_##_orig)(_args)
@@ -171,7 +173,7 @@
_new; \
struct { \
_orig; \
- } __UNIQUE_ID(rh_kabi_hide); \
+ } RH_KABI_UNIQUE_ID; \
__RH_KABI_CHECK_SIZE_ALIGN(_orig, _new); \
}
# define _RH_KABI_REPLACE_UNSAFE(_orig, _new) _new
@@ -218,7 +220,7 @@
#define RH_KABI_EXTEND_WITH_SIZE(_new, _size) \
RH_KABI_EXTEND(union { \
_new; \
- unsigned long __UNIQUE_ID(rh_kabi_reserved)[_size]; \
+ unsigned long RH_KABI_UNIQUE_ID[_size]; \
__RH_KABI_CHECK_SIZE(_new, 8 * (_size)); \
})
--
2.28.0

View File

@ -1,101 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jiri Benc <jbenc@redhat.com>
Date: Wed, 19 Feb 2020 11:52:19 +0100
Subject: [PATCH] redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
RH-Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
RH-Acked-by: Hangbin Liu <haliu@redhat.com>
Upstream status: RHEL only
This allows addition of a struct into struct while reserving extra space.
See the documentation in rh_kabi.h for details.
The check for size is automatically disabled in -debug kernels that have
many fields larger than the production kernels (mutexes etc.) and that are
not under kABI guarantee.
I'm also moving a misplaced comment for RH_KABI_FILL_HOLE.
(Pointed out by Sabrina:) We need to force align the added field to 8 byte
offset. Otherwise, if the required alignment of the added field changed
later (e.g. it was a structure with only a single field that was changed
from int to char) and the previous field was smaller than long, it could
lead to the whole union shifting position and offsets of the following
fields could change. It's also safer to align the size, too.
Let the 'size' parameter specify number of longs to be added and not number
of bytes. Note we assume a 64 bit architecture, which is the case for RHEL.
Upstream Status: RHEL only
Signed-off-by: Jiri Benc <jbenc@redhat.com>
---
include/linux/rh_kabi.h | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
index cdc636d3013d..4debb7aaad48 100644
--- a/include/linux/rh_kabi.h
+++ b/include/linux/rh_kabi.h
@@ -45,11 +45,24 @@
* RH_KABI_EXTEND
* Simple macro for adding a new element to a struct.
*
- * Warning: only use if a hole exists for _all_ arches. Use pahole to verify.
+ * RH_KABI_EXTEND_WITH_SIZE
+ * Adds a new element (usually a struct) to a struct and reserves extra
+ * space for the new element. The provided 'size' is the total space to
+ * be added in longs (i.e. it's 8 * 'size' bytes), including the size of
+ * the added element. It is automatically checked that the new element
+ * does not overflow the reserved space, now nor in the future. However,
+ * no attempt is done to check the content of the added element (struct)
+ * for kABI conformance - kABI checking inside the added element is
+ * effectively switched off.
+ * For any struct being added by RH_KABI_EXTEND_WITH_SIZE, it is
+ * recommended its content to be documented as not covered by kABI
+ * guarantee.
*
* RH_KABI_FILL_HOLE
* Simple macro for filling a hole in a struct.
*
+ * Warning: only use if a hole exists for _all_ arches. Use pahole to verify.
+ *
* RH_KABI_RENAME
* Simple macro for renaming an element without changing its type. This
* macro can be used in bitfields, for example.
@@ -133,8 +146,12 @@
_Static_assert(__alignof__(struct{_new;}) <= __alignof__(struct{_orig;}), \
__FILE__ ":" __stringify(__LINE__) ": " __stringify(_orig) " is not aligned the same as " __stringify(_new) RH_KABI_ALIGN_WARNING); \
}
+# define __RH_KABI_CHECK_SIZE(_item, _size) \
+ _Static_assert(sizeof(struct{_item;}) <= _size, \
+ __FILE__ ":" __stringify(__LINE__) ": " __stringify(_item) " is larger than the reserved size (" __stringify(_size) " bytes)" RH_KABI_ALIGN_WARNING)
#else
# define __RH_KABI_CHECK_SIZE_ALIGN(_orig, _new)
+# define __RH_KABI_CHECK_SIZE(_item, _size)
#endif
# define _RH_KABI_DEPRECATE(_type, _orig) _type rh_reserved_##_orig
@@ -186,6 +203,16 @@
#define RH_KABI_EXCLUDE(_elem) _RH_KABI_EXCLUDE(_elem);
+/*
+ * Extending a struct while reserving extra space.
+ */
+#define RH_KABI_EXTEND_WITH_SIZE(_new, _size) \
+ RH_KABI_EXTEND(union { \
+ _new; \
+ unsigned long __UNIQUE_ID(rh_kabi_reserved)[_size]; \
+ __RH_KABI_CHECK_SIZE(_new, 8 * (_size)); \
+ })
+
/*
* RHEL macros to extend structs.
*
--
2.28.0

View File

@ -1,104 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jakub Racek <jracek@redhat.com>
Date: Thu, 22 Nov 2018 12:59:45 +0100
Subject: [PATCH] rh_kabi: introduce RH_KABI_EXCLUDE
Message-id: <1542891606-8048-24-git-send-email-jracek@redhat.com>
Patchwork-id: 233503
O-Subject: [ARK PATCH 23/44] [kernel] rh_kabi: introduce RH_KABI_EXCLUDE
Bugzilla: 1652256
RH-Acked-by: Don Zickus <dzickus@redhat.com>
RH-Acked-by: Jiri Benc <jbenc@redhat.com>
From: Jiri Benc <jbenc@redhat.com>
Bugzilla: 1652256
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=19244562
rhel8 commit 1c588b1bbe6ea3e9e1701ccf10e22f73f687ad02
Author: Jiri Benc <jbenc@redhat.com>
Date: Wed Nov 21 17:15:39 2018 +0100
[kernel] rh_kabi: introduce RH_KABI_EXCLUDE
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568551
Add a way to exclude certain fields of a structure that would be otherwise
kABI whitelisted. The new RH_KABI_EXCLUDE macro serves two purposes:
1. Not adding the excluded fields to symbol checksums, making their later
changes easier.
2. Document that the given fields are not considered to be kABI whitelisted
by Red Hat.
Note that:
- This needs to be done _before_ the actual structure gets whitelisted.
- It still allows later conversion of the excluded fields to whitelist
covered fields by simply changing RH_KABI_EXCLUDE to RH_KABI_EXTEND.
- The excluded fields can be modified at will but extra care needs to be
taken to not cause problems with 3rd party drivers using the fields. See
the comment inside the patch for details.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Jakub Racek <jracek@redhat.com>
---
include/linux/rh_kabi.h | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/include/linux/rh_kabi.h b/include/linux/rh_kabi.h
index e0d3353802bb..87f2bd530df7 100644
--- a/include/linux/rh_kabi.h
+++ b/include/linux/rh_kabi.h
@@ -80,6 +80,18 @@
* corrupt memory. Instead, by changing the symbol checksum, such modules
* won't be loaded by the kernel. This macro should only be used as a
* last resort when all other KABI workarounds have failed.
+ * RH_KABI_EXCLUDE
+ * Exclude the element from checksum generation. Any such element is
+ * considered not to be part of the kABI whitelist and may be changed at
+ * will. Note however that it's the responsibility of the developer
+ * changing the element to ensure 3rd party drivers using this element
+ * won't panic, for example by not allowing them to be loaded. That can
+ * be achieved by changing another, non-whitelisted symbol they use,
+ * either by nature of the change or by using RH_KABI_FORCE_CHANGE.
+ *
+ * Also note that any change to the element must preserve its size. Change
+ * of the size is not allowed and would constitute a silent kABI breakage.
+ * Beware that the RH_KABI_EXCLUDE macro does not do any size checks.
*
* NOTE
* Don't use ';' after these macros as it messes up the kABI checker by
@@ -100,6 +112,7 @@
# define _RH_KABI_DEPRECATE_FN(_type, _orig, _args...) _type (*_orig)(_args)
# define _RH_KABI_REPLACE(_orig, _new) _orig
# define _RH_KABI_REPLACE_UNSAFE(_orig, _new) _orig
+# define _RH_KABI_EXCLUDE(_elem)
#else
@@ -137,6 +150,8 @@
}
# define _RH_KABI_REPLACE_UNSAFE(_orig, _new) _new
+# define _RH_KABI_EXCLUDE(_elem) _elem
+
#endif /* __GENKSYMS__ */
/* semicolon added wrappers for the RH_KABI_REPLACE macros */
@@ -169,4 +184,6 @@
*/
# define _RH_KABI_RESERVE(n) unsigned long rh_reserved##n
+#define RH_KABI_EXCLUDE(_elem) _RH_KABI_EXCLUDE(_elem);
+
#endif /* _LINUX_RH_KABI_H */
--
2.28.0

View File

@ -1,67 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Wed, 30 Oct 2019 14:37:49 +0000
Subject: [PATCH] s390: Lock down the kernel when the IPL secure flag is set
Automatically lock down the kernel to LOCKDOWN_CONFIDENTIALITY_MAX if
the IPL secure flag is set.
Upstream Status: RHEL only
Suggested-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/s390/include/asm/ipl.h | 1 +
arch/s390/kernel/ipl.c | 5 +++++
arch/s390/kernel/setup.c | 4 ++++
3 files changed, 10 insertions(+)
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 7d5cfdda5277..be66ee5d0437 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -120,6 +120,7 @@ int ipl_report_add_component(struct ipl_report *report, struct kexec_buf *kbuf,
unsigned char flags, unsigned short cert);
int ipl_report_add_certificate(struct ipl_report *report, void *key,
unsigned long addr, unsigned long len);
+bool ipl_get_secureboot(void);
/*
* DIAG 308 support
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 90a2a17239b0..be3b72c53656 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2110,3 +2110,8 @@ int ipl_report_free(struct ipl_report *report)
}
#endif
+
+bool ipl_get_secureboot(void)
+{
+ return !!ipl_secure_flag;
+}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index e600f6953d7c..4264e01824b3 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -49,6 +49,7 @@
#include <linux/memory.h>
#include <linux/compat.h>
#include <linux/start_kernel.h>
+#include <linux/security.h>
#include <asm/boot_data.h>
#include <asm/ipl.h>
@@ -1085,6 +1086,9 @@ void __init setup_arch(char **cmdline_p)
log_component_list();
+ if (ipl_get_secureboot())
+ security_lock_kernel_down("Secure IPL mode", LOCKDOWN_INTEGRITY_MAX);
+
/* Have one command line that is parsed and saved in /proc/cmdline */
/* boot_command_line has been already set up in early.c */
*cmdline_p = boot_command_line;
--
2.28.0

View File

@ -1,70 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Don Brace <dbrace@redhat.com>
Date: Mon, 16 Jul 2018 19:20:41 -0400
Subject: [PATCH] scsi: smartpqi: add inspur advantech ids
Message-id: <1531768843-2544-4-git-send-email-dbrace@redhat.com>
Patchwork-id: 224988
O-Subject: [RHEL 8.0 e-stor V2 PATCH 3/5] scsi: smartpqi: add inspur advantech ids
Bugzilla: 1503736
RH-Acked-by: Ewan Milne <emilne@redhat.com>
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>
From: Kevin Barnett <kevin.barnett@microsemi.com>
Add support for these new device IDs:
Advantech MIC-8312BridgeB
INSPUR PM8204-2GB
INSPUR PM8204-4GB
INSPUR PM8222-SHBA
Upstream Status: RHEL only
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 9f8d05fa98442de78d1ab30235b0cc656ed7aff0)
Signed-off-by: Don Brace <dbrace@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/scsi/smartpqi/smartpqi_init.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index bd38c8cea56e..477eb841d4e5 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -8251,6 +8251,18 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x19e5, 0xd22c)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x004a)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x004b)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x004c)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x0110)
@@ -8387,6 +8399,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADVANTECH, 0x8312)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADVANTECH, 0x8312)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_DELL, 0x1fe0)
--
2.28.0

View File

@ -1,103 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Mon, 30 Sep 2019 21:22:47 +0000
Subject: [PATCH] security: lockdown: expose a hook to lock the kernel down
In order to automatically lock down kernels running on UEFI machines
booted in Secure Boot mode, expose the lock_kernel_down() hook.
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
include/linux/lsm_hook_defs.h | 2 ++
include/linux/lsm_hooks.h | 6 ++++++
include/linux/security.h | 5 +++++
security/lockdown/lockdown.c | 1 +
security/security.c | 6 ++++++
5 files changed, 20 insertions(+)
diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h
index 2a8c74d99015..0d3129588b78 100644
--- a/include/linux/lsm_hook_defs.h
+++ b/include/linux/lsm_hook_defs.h
@@ -383,6 +383,8 @@ LSM_HOOK(void, LSM_RET_VOID, bpf_prog_free_security, struct bpf_prog_aux *aux)
#endif /* CONFIG_BPF_SYSCALL */
LSM_HOOK(int, 0, locked_down, enum lockdown_reason what)
+LSM_HOOK(int, 0, lock_kernel_down, const char *where, enum lockdown_reason level)
+
#ifdef CONFIG_PERF_EVENTS
LSM_HOOK(int, 0, perf_event_open, struct perf_event_attr *attr, int type)
diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
index 9e2e3e63719d..317660f68b4f 100644
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1507,6 +1507,12 @@
*
* @what: kernel feature being accessed
*
+ * @lock_kernel_down
+ * Put the kernel into lock-down mode.
+ *
+ * @where: Where the lock-down is originating from (e.g. command line option)
+ * @level: The lock-down level (can only increase)
+ *
* Security hooks for perf events
*
* @perf_event_open:
diff --git a/include/linux/security.h b/include/linux/security.h
index 0a0a03b36a3b..26869f44416b 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -451,6 +451,7 @@ int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
int security_locked_down(enum lockdown_reason what);
+int security_lock_kernel_down(const char *where, enum lockdown_reason level);
#else /* CONFIG_SECURITY */
static inline int call_blocking_lsm_notifier(enum lsm_event event, void *data)
@@ -1291,6 +1292,10 @@ static inline int security_locked_down(enum lockdown_reason what)
{
return 0;
}
+static inline int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+ return 0;
+}
#endif /* CONFIG_SECURITY */
#if defined(CONFIG_SECURITY) && defined(CONFIG_WATCH_QUEUE)
diff --git a/security/lockdown/lockdown.c b/security/lockdown/lockdown.c
index 87cbdc64d272..18555cf18da7 100644
--- a/security/lockdown/lockdown.c
+++ b/security/lockdown/lockdown.c
@@ -73,6 +73,7 @@ static int lockdown_is_locked_down(enum lockdown_reason what)
static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(locked_down, lockdown_is_locked_down),
+ LSM_HOOK_INIT(lock_kernel_down, lock_kernel_down),
};
static int __init lockdown_lsm_init(void)
diff --git a/security/security.c b/security/security.c
index 70a7ad357bc6..23e16e773bc2 100644
--- a/security/security.c
+++ b/security/security.c
@@ -2516,6 +2516,12 @@ int security_locked_down(enum lockdown_reason what)
}
EXPORT_SYMBOL(security_locked_down);
+int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+ return call_int_hook(lock_kernel_down, 0, where, level);
+}
+EXPORT_SYMBOL(security_lock_kernel_down);
+
#ifdef CONFIG_PERF_EVENTS
int security_perf_event_open(struct perf_event_attr *attr, int type)
{
--
2.28.0

View File

@ -1,54 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Tue, 23 Jul 2019 15:26:09 +0000
Subject: [PATCH] tags.sh: Ignore redhat/rpm
Rebased for v5.3-rc1. Commit 95fd3f87bfbe ("kbuild: add a flag to force
absolute path for srctree") changed the context.
Message-id: <20180529180112.28376-1-prarit@redhat.com>
Patchwork-id: 8101
O-Subject: [kernel team] [RHEL8.0 BZ 1582586] scripts/tags.sh: Ignore redhat/rpm
Bugzilla: 1582586
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Jarod Wilson <jarod@redhat.com>
RH-Acked-by: Neil Horman <nhorman@redhat.com>
Bugzilla: http://bugzilla.redhat.com/1582586
Brew: https://brewweb.devel.redhat.com/taskinfo?taskID=16502319
RHEL_only.
If 'make cscope' is run on a tree which has had 'make rh-rpm',
'make rh-cross-*', etc., on it, the tags information contains entries
from the redhat/rpm/ directories.
Ignore the tags search in redhat/rpm.
Backport of RHEL7 464ad7779507 ("[scripts] tags.sh: ignore redhat/rpm").
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
scripts/tags.sh | 2 ++
1 file changed, 2 insertions(+)
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 32d3f53af10b..52a0138c6920 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -16,6 +16,8 @@ fi
ignore="$(echo "$RCS_FIND_IGNORE" | sed 's|\\||g' )"
# tags and cscope files should also ignore MODVERSION *.mod.c files
ignore="$ignore ( -name *.mod.c ) -prune -o"
+# RHEL tags and cscope should also ignore redhat/rpm
+ignore="$ignore ( -path redhat/rpm ) -prune -o"
# Use make KBUILD_ABS_SRCTREE=1 {tags|cscope}
# to force full paths for a non-O= build
--
2.28.0

View File

@ -1,61 +0,0 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Don Zickus <dzickus@redhat.com>
Date: Thu, 14 May 2020 10:30:51 -0400
Subject: [PATCH] x86: Fix compile issues with rh_check_supported()
Upstream status: RHEL only
The function rh_check_supported is a RHEL function to limit the
platforms RHEL does not want to support.
To avoid imposing this requirement on Fedora, the function was
wrapped with CONFIG_RHEL_DIFFERENCES so Fedora can disable this.
However, this has a few compile warnings that need to be cleaned up
when disabled.
Move CONFIG_RHEL_DIFFERENCES to include the functions themselves
instead of the call. As the unused functions created warnings.
V2: modified stub definition
Signed-off-by: Don Zickus <dzickus@redhat.com>
---
arch/x86/kernel/setup.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b57e6dd6d7ef..66441cb9c1af 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -757,6 +757,7 @@ static void __init trim_low_memory_range(void)
memblock_reserve(0, ALIGN(reserve_low, PAGE_SIZE));
}
+#ifdef CONFIG_RHEL_DIFFERENCES
static bool valid_amd_processor(__u8 family, const char *model_id)
{
bool valid;
@@ -881,6 +882,9 @@ static void rh_check_supported(void)
if (acpi_disabled && !guest)
pr_crit("ACPI has been disabled or is not available on this hardware. This may result in a single cpu boot, incorrect PCI IRQ routing, or boot failure.\n");
}
+#else
+#define rh_check_supported()
+#endif
/*
* Dump out kernel offset information on panic.
@@ -1371,9 +1375,7 @@ void __init setup_arch(char **cmdline_p)
efi_apply_memmap_quirks();
#endif
-#ifdef CONFIG_RHEL_DIFFERENCES
rh_check_supported();
-#endif
unwind_init();
}
--
2.28.0

View File

@ -12,7 +12,7 @@ RHEL_MINOR = 99
# #
# Use this spot to avoid future merge conflicts. # Use this spot to avoid future merge conflicts.
# Do not trim this comment. # Do not trim this comment.
RHEL_RELEASE = 28 RHEL_RELEASE = 30
# #
# Early y+1 numbering # Early y+1 numbering

View File

@ -1,74 +0,0 @@
0001-initial-commit-Add-Red-Hat-variables-in-the-top-leve.patch
0001-Pull-the-RHEL-version-defines-out-of-the-Makefile.patch
0001-Introduce-CONFIG_RH_DISABLE_DEPRECATED.patch
0001-Add-Red-Hat-tainting.patch
0001-ACPI-APEI-arm64-Ignore-broken-HPE-moonshot-APEI-supp.patch
0001-modules-add-rhelversion-MODULE_INFO-tag.patch
0001-ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m.patch
0001-aarch64-acpi-scan-Fix-regression-related-to-X-Gene-U.patch
0001-acpi-prefer-booting-with-ACPI-over-DTS.patch
0001-kdump-round-up-the-total-memory-size-to-128M-for-cra.patch
0001-kdump-add-support-for-crashkernel-auto.patch
0001-put-RHEL-info-into-generated-headers.patch
0001-tags.sh-Ignore-redhat-rpm.patch
0001-kdump-fix-a-grammar-issue-in-a-kernel-message.patch
0001-add-Red-Hat-specific-taint-flags.patch
0001-bpf-set-unprivileged_bpf_disabled-to-1-by-default-ad.patch
0001-bpf-Add-tech-preview-taint-for-syscall.patch
0001-Vulcan-AHCI-PCI-bar-fix-for-Broadcom-Vulcan-early-si.patch
0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
0001-add-pci_hw_vendor_status.patch
0001-kABI-Add-generic-kABI-macros-to-use-for-kABI-workaro.patch
0001-ice-mark-driver-as-tech-preview.patch
0001-scsi-smartpqi-add-inspur-advantech-ids.patch
0001-IB-rxe-Mark-Soft-RoCE-Transport-driver-as-tech-previ.patch
0001-ipmi-do-not-configure-ipmi-for-HPE-m400.patch
0001-rh_kabi-introduce-RH_KABI_EXCLUDE.patch
0001-iommu-arm-smmu-workaround-DMA-mode-issues.patch
0001-arm-aarch64-Drop-the-EXPERT-setting-from-ARM64_FORCE.patch
0001-Add-support-for-deprecating-processors.patch
0001-Add-efi_status_to_str-and-rework-efi_status_to_err.patch
0001-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch
0001-security-lockdown-expose-a-hook-to-lock-the-kernel-d.patch
0001-efi-Add-an-EFI_SECURE_BOOT-flag-to-indicate-secure-b.patch
0001-efi-Lock-down-the-kernel-if-booted-in-secure-boot-mo.patch
0001-s390-Lock-down-the-kernel-when-the-IPL-secure-flag-i.patch
0001-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch
0001-Rename-RH_DISABLE_DEPRECATED-to-RHEL_DIFFERENCES.patch
0001-kernel-add-SUPPORT_REMOVED-kernel-taint.patch
0001-mpt-remove-certain-deprecated-pci-ids.patch
0001-megaraid_sas-remove-deprecated-pci-ids.patch
0001-aacraid-Remove-depreciated-device-and-vendor-PCI-id-.patch
0001-qla4xxx-Remove-deprecated-PCI-IDs-from-RHEL-8.patch
0001-hpsa-remove-old-cciss-based-smartarray-pci-ids.patch
0001-mptspi-Taint-kernel-if-mptspi-is-loaded.patch
0001-be2iscsi-remove-unsupported-device-IDs.patch
0001-qla2xxx-Remove-PCI-IDs-of-deprecated-adapter.patch
0001-mptspi-pci-id-table-changes.patch
0001-mptsas-Taint-kernel-if-mptsas-is-loaded.patch
0001-mptsas-pci-id-table-changes.patch
0001-Removing-Obsolete-hba-pci-ids-from-rhel8.patch
0001-redhat-rh_kabi-Add-macros-to-size-and-extend-structs.patch
0001-redhat-rh_kabi-Fix-RH_KABI_SET_SIZE-to-use-dereferen.patch
0001-redhat-rh_kabi-Indirect-EXTEND-macros-so-nesting-of-.patch
0001-redhat-rh_kabi-introduce-RH_KABI_EXTEND_WITH_SIZE.patch
0001-redhat-rh_kabi-add-a-comment-with-warning-about-RH_K.patch
0001-redhat-rh_kabi-deduplication-friendly-structs.patch
0001-arm-make-CONFIG_HIGHPTE-optional-without-CONFIG_EXPE.patch
0001-ARM-tegra-usb-no-reset.patch
0001-Input-rmi4-remove-the-need-for-artificial-IRQ-in-cas.patch
0001-Drop-that-for-now.patch
0001-KEYS-Make-use-of-platform-keyring-for-module-signatu.patch
0001-mm-kmemleak-skip-late_init-if-not-skip-disable.patch
0001-ARM-fix-__get_user_check-in-case-uaccess_-calls-are-.patch
0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch
0001-drm-panel-add-Xingbangda-XBD599-panel.patch
0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch
0001-e1000e-bump-up-timeout-to-wait-when-ME-un-configure-.patch
0001-x86-Fix-compile-issues-with-rh_check_supported.patch
0001-redhat-Replace-hardware.redhat.com-link-in-Unsupport.patch
0001-arch-x86-Remove-vendor-specific-CPU-ID-checks.patch
0001-Fixes-acpi-prefer-booting-with-ACPI-over-DTS-to-be-R.patch
0001-Work-around-for-gcc-bug-https-gcc.gnu.org-bugzilla-s.patch
0001-Temporarily-remove-cdomain-from-sphinx-documentation.patch
0001-Filter-out-LTO-build-options-from-the-perl-ccopts.patch

View File

@ -1,6 +1,6 @@
a71a336858692932d6c97e3c4d611ab4a2b8f80d Filter out LTO build options from the perl ccopts 4832d86eca09ae8e25fe4f3d3461febae3954fc9 Filter out LTO build options from the perl ccopts
a531ea58bbad61c0c1bd7f749b383bd14360cc56 Temporarily remove cdomain from sphinx documentation d5be61198fd5662ccd774234bc09ae26c8d45943 Temporarily remove cdomain from sphinx documentation
3efb2dd58766839acf864fd8a6a2f9180e006c02 Work around for gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96377 94eca877fc9b9f2b9b4e6b0555b60625bf85c2e2 Work around for gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96377
17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only 17b0f7f1d49df30661b517d668715ff5ee1bab09 Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only
e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks e7c009cd91ababdbb5f726ef592c7800f0682d3a arch/x86: Remove vendor specific CPU ID checks
7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message 7120b2a26fc4c7954fd0395973dc6739c110e091 redhat: Replace hardware.redhat.com link in Unsupported message
@ -70,9 +70,5 @@ de13e14cc2388478d9a2c68c5d90affd92098f11 ACPI / irq: Workaround firmware issue o
3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support 3247f9c838f4aa91aa5d08c152b385d61554d4b5 ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting e80982feaa68226ff60d2f83dace2016c35270d3 Add Red Hat tainting
2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED 2987f9a606df106f5bdfa4113eb55356a21085a6 Introduce CONFIG_RH_DISABLE_DEPRECATED
43557447afe99a0181e0f80e682a7cbdc03b4e7a gitattributes: Remove unnecesary export restrictions
f003c79ead7f293e9315954c2c0fe39dda34459d Add RHMAINTAINERS file and supporting conf
825b7aa1169c8a40f81b3b3a886a866ae80c3dc2 gitlab: Add CI job for packaging scripts
a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile a99885a5e77af594dfdce586cc83e5911d8401ce Pull the RHEL version defines out of the Makefile
cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile cd3a5d30570279538623ea8a1255db0ee4b728f7 [initial commit] Add Red Hat variables in the top level makefile
9646ba0fd73d6c948df5532d22b6d1e452930cc2 [initial commit] Red Hat gitignore and attributes

View File

@ -30,7 +30,7 @@ Summary: The Linux kernel
# For a stable, released kernel, released_kernel should be 1. # For a stable, released kernel, released_kernel should be 1.
%global released_kernel 0 %global released_kernel 0
%global distro_build 0.rc8.28 %global distro_build 0.rc8.20201007git7575fdda569b.30
%if 0%{?fedora} %if 0%{?fedora}
%define secure_boot_arch x86_64 %define secure_boot_arch x86_64
@ -69,13 +69,13 @@ Summary: The Linux kernel
%endif %endif
%define rpmversion 5.9.0 %define rpmversion 5.9.0
%define pkgrelease 0.rc8.28 %define pkgrelease 0.rc8.20201007git7575fdda569b.30
# This is needed to do merge window version magic # This is needed to do merge window version magic
%define patchlevel 9 %define patchlevel 9
# allow pkg_release to have configurable %%{?dist} tag # allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc8.28%{?buildid}%{?dist} %define specrelease 0.rc8.20201007git7575fdda569b.30%{?buildid}%{?dist}
%define pkg_release %{specrelease} %define pkg_release %{specrelease}
@ -166,7 +166,7 @@ Summary: The Linux kernel
# Set debugbuildsenabled to 1 for production (build separate debug kernels) # Set debugbuildsenabled to 1 for production (build separate debug kernels)
# and 0 for rawhide (all kernels are debug kernels). # and 0 for rawhide (all kernels are debug kernels).
# See also 'make debug' and 'make release'. # See also 'make debug' and 'make release'.
%define debugbuildsenabled 1 %define debugbuildsenabled 0
# The kernel tarball/base version # The kernel tarball/base version
%define kversion 5.9 %define kversion 5.9
@ -182,10 +182,10 @@ Summary: The Linux kernel
# no whitelist # no whitelist
%define with_kernel_abi_whitelists 0 %define with_kernel_abi_whitelists 0
# Fedora builds these separately # Fedora builds these separately
%endif
%define with_perf 0 %define with_perf 0
%define with_tools 0 %define with_tools 0
%define with_bpftool 0 %define with_bpftool 0
%endif
%if %{with_verbose} %if %{with_verbose}
%define make_opts V=1 %define make_opts V=1
@ -566,7 +566,7 @@ BuildRequires: asciidoc
# exact git commit you can run # exact git commit you can run
# #
# xzcat -qq ${TARBALL} | git get-tar-commit-id # xzcat -qq ${TARBALL} | git get-tar-commit-id
Source0: linux-5.9-rc8.tar.xz Source0: linux-20201007git7575fdda569b.tar.xz
Source1: Makefile.rhelver Source1: Makefile.rhelver
@ -707,7 +707,6 @@ Source2001: cpupower.config
# source tree, but in the mean time we carry this to support the legacy workflow # source tree, but in the mean time we carry this to support the legacy workflow
Source3000: merge.pl Source3000: merge.pl
Source3001: kernel-local Source3001: kernel-local
Source3002: Patchlist
Source3003: Patchlist.changelog Source3003: Patchlist.changelog
Source4000: README.rst Source4000: README.rst
@ -716,81 +715,7 @@ Source4000: README.rst
%if !%{nopatches} %if !%{nopatches}
Patch2: 0001-initial-commit-Add-Red-Hat-variables-in-the-top-leve.patch Patch1: patch-%{rpmversion}-redhat.patch
Patch3: 0001-Pull-the-RHEL-version-defines-out-of-the-Makefile.patch
Patch4: 0001-Introduce-CONFIG_RH_DISABLE_DEPRECATED.patch
Patch5: 0001-Add-Red-Hat-tainting.patch
Patch6: 0001-ACPI-APEI-arm64-Ignore-broken-HPE-moonshot-APEI-supp.patch
Patch7: 0001-modules-add-rhelversion-MODULE_INFO-tag.patch
Patch8: 0001-ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m.patch
Patch9: 0001-aarch64-acpi-scan-Fix-regression-related-to-X-Gene-U.patch
Patch10: 0001-acpi-prefer-booting-with-ACPI-over-DTS.patch
Patch11: 0001-kdump-round-up-the-total-memory-size-to-128M-for-cra.patch
Patch12: 0001-kdump-add-support-for-crashkernel-auto.patch
Patch13: 0001-put-RHEL-info-into-generated-headers.patch
Patch14: 0001-tags.sh-Ignore-redhat-rpm.patch
Patch15: 0001-kdump-fix-a-grammar-issue-in-a-kernel-message.patch
Patch16: 0001-add-Red-Hat-specific-taint-flags.patch
Patch17: 0001-bpf-set-unprivileged_bpf_disabled-to-1-by-default-ad.patch
Patch18: 0001-bpf-Add-tech-preview-taint-for-syscall.patch
Patch19: 0001-Vulcan-AHCI-PCI-bar-fix-for-Broadcom-Vulcan-early-si.patch
Patch20: 0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
Patch21: 0001-add-pci_hw_vendor_status.patch
Patch22: 0001-kABI-Add-generic-kABI-macros-to-use-for-kABI-workaro.patch
Patch23: 0001-ice-mark-driver-as-tech-preview.patch
Patch24: 0001-scsi-smartpqi-add-inspur-advantech-ids.patch
Patch25: 0001-IB-rxe-Mark-Soft-RoCE-Transport-driver-as-tech-previ.patch
Patch26: 0001-ipmi-do-not-configure-ipmi-for-HPE-m400.patch
Patch27: 0001-rh_kabi-introduce-RH_KABI_EXCLUDE.patch
Patch28: 0001-iommu-arm-smmu-workaround-DMA-mode-issues.patch
Patch29: 0001-arm-aarch64-Drop-the-EXPERT-setting-from-ARM64_FORCE.patch
Patch30: 0001-Add-support-for-deprecating-processors.patch
Patch31: 0001-Add-efi_status_to_str-and-rework-efi_status_to_err.patch
Patch32: 0001-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch
Patch33: 0001-security-lockdown-expose-a-hook-to-lock-the-kernel-d.patch
Patch34: 0001-efi-Add-an-EFI_SECURE_BOOT-flag-to-indicate-secure-b.patch
Patch35: 0001-efi-Lock-down-the-kernel-if-booted-in-secure-boot-mo.patch
Patch36: 0001-s390-Lock-down-the-kernel-when-the-IPL-secure-flag-i.patch
Patch37: 0001-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch
Patch38: 0001-Rename-RH_DISABLE_DEPRECATED-to-RHEL_DIFFERENCES.patch
Patch39: 0001-kernel-add-SUPPORT_REMOVED-kernel-taint.patch
Patch40: 0001-mpt-remove-certain-deprecated-pci-ids.patch
Patch41: 0001-megaraid_sas-remove-deprecated-pci-ids.patch
Patch42: 0001-aacraid-Remove-depreciated-device-and-vendor-PCI-id-.patch
Patch43: 0001-qla4xxx-Remove-deprecated-PCI-IDs-from-RHEL-8.patch
Patch44: 0001-hpsa-remove-old-cciss-based-smartarray-pci-ids.patch
Patch45: 0001-mptspi-Taint-kernel-if-mptspi-is-loaded.patch
Patch46: 0001-be2iscsi-remove-unsupported-device-IDs.patch
Patch47: 0001-qla2xxx-Remove-PCI-IDs-of-deprecated-adapter.patch
Patch48: 0001-mptspi-pci-id-table-changes.patch
Patch49: 0001-mptsas-Taint-kernel-if-mptsas-is-loaded.patch
Patch50: 0001-mptsas-pci-id-table-changes.patch
Patch51: 0001-Removing-Obsolete-hba-pci-ids-from-rhel8.patch
Patch52: 0001-redhat-rh_kabi-Add-macros-to-size-and-extend-structs.patch
Patch53: 0001-redhat-rh_kabi-Fix-RH_KABI_SET_SIZE-to-use-dereferen.patch
Patch54: 0001-redhat-rh_kabi-Indirect-EXTEND-macros-so-nesting-of-.patch
Patch55: 0001-redhat-rh_kabi-introduce-RH_KABI_EXTEND_WITH_SIZE.patch
Patch56: 0001-redhat-rh_kabi-add-a-comment-with-warning-about-RH_K.patch
Patch57: 0001-redhat-rh_kabi-deduplication-friendly-structs.patch
Patch58: 0001-arm-make-CONFIG_HIGHPTE-optional-without-CONFIG_EXPE.patch
Patch59: 0001-ARM-tegra-usb-no-reset.patch
Patch60: 0001-Input-rmi4-remove-the-need-for-artificial-IRQ-in-cas.patch
Patch61: 0001-Drop-that-for-now.patch
Patch62: 0001-KEYS-Make-use-of-platform-keyring-for-module-signatu.patch
Patch63: 0001-mm-kmemleak-skip-late_init-if-not-skip-disable.patch
Patch64: 0001-ARM-fix-__get_user_check-in-case-uaccess_-calls-are-.patch
Patch65: 0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch
Patch66: 0001-drm-panel-add-Xingbangda-XBD599-panel.patch
Patch67: 0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch
Patch68: 0001-e1000e-bump-up-timeout-to-wait-when-ME-un-configure-.patch
Patch69: 0001-x86-Fix-compile-issues-with-rh_check_supported.patch
Patch70: 0001-redhat-Replace-hardware.redhat.com-link-in-Unsupport.patch
Patch71: 0001-arch-x86-Remove-vendor-specific-CPU-ID-checks.patch
Patch72: 0001-Fixes-acpi-prefer-booting-with-ACPI-over-DTS-to-be-R.patch
Patch73: 0001-Work-around-for-gcc-bug-https-gcc.gnu.org-bugzilla-s.patch
Patch74: 0001-Temporarily-remove-cdomain-from-sphinx-documentation.patch
Patch75: 0001-Filter-out-LTO-build-options-from-the-perl-ccopts.patch
%endif %endif
# empty final patch to facilitate testing of kernel patches # empty final patch to facilitate testing of kernel patches
@ -1285,89 +1210,15 @@ ApplyOptionalPatch()
fi fi
} }
%setup -q -n kernel-5.9-rc8 -c %setup -q -n kernel-20201007git7575fdda569b -c
mv linux-5.9-rc8 linux-%{KVERREL} mv linux-20201007git7575fdda569b linux-%{KVERREL}
cd linux-%{KVERREL} cd linux-%{KVERREL}
cp -a %{SOURCE1} . cp -a %{SOURCE1} .
%if !%{nopatches} %if !%{nopatches}
ApplyOptionalPatch 0001-initial-commit-Add-Red-Hat-variables-in-the-top-leve.patch ApplyOptionalPatch patch-%{rpmversion}-redhat.patch
ApplyOptionalPatch 0001-Pull-the-RHEL-version-defines-out-of-the-Makefile.patch
ApplyOptionalPatch 0001-Introduce-CONFIG_RH_DISABLE_DEPRECATED.patch
ApplyOptionalPatch 0001-Add-Red-Hat-tainting.patch
ApplyOptionalPatch 0001-ACPI-APEI-arm64-Ignore-broken-HPE-moonshot-APEI-supp.patch
ApplyOptionalPatch 0001-modules-add-rhelversion-MODULE_INFO-tag.patch
ApplyOptionalPatch 0001-ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m.patch
ApplyOptionalPatch 0001-aarch64-acpi-scan-Fix-regression-related-to-X-Gene-U.patch
ApplyOptionalPatch 0001-acpi-prefer-booting-with-ACPI-over-DTS.patch
ApplyOptionalPatch 0001-kdump-round-up-the-total-memory-size-to-128M-for-cra.patch
ApplyOptionalPatch 0001-kdump-add-support-for-crashkernel-auto.patch
ApplyOptionalPatch 0001-put-RHEL-info-into-generated-headers.patch
ApplyOptionalPatch 0001-tags.sh-Ignore-redhat-rpm.patch
ApplyOptionalPatch 0001-kdump-fix-a-grammar-issue-in-a-kernel-message.patch
ApplyOptionalPatch 0001-add-Red-Hat-specific-taint-flags.patch
ApplyOptionalPatch 0001-bpf-set-unprivileged_bpf_disabled-to-1-by-default-ad.patch
ApplyOptionalPatch 0001-bpf-Add-tech-preview-taint-for-syscall.patch
ApplyOptionalPatch 0001-Vulcan-AHCI-PCI-bar-fix-for-Broadcom-Vulcan-early-si.patch
ApplyOptionalPatch 0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
ApplyOptionalPatch 0001-add-pci_hw_vendor_status.patch
ApplyOptionalPatch 0001-kABI-Add-generic-kABI-macros-to-use-for-kABI-workaro.patch
ApplyOptionalPatch 0001-ice-mark-driver-as-tech-preview.patch
ApplyOptionalPatch 0001-scsi-smartpqi-add-inspur-advantech-ids.patch
ApplyOptionalPatch 0001-IB-rxe-Mark-Soft-RoCE-Transport-driver-as-tech-previ.patch
ApplyOptionalPatch 0001-ipmi-do-not-configure-ipmi-for-HPE-m400.patch
ApplyOptionalPatch 0001-rh_kabi-introduce-RH_KABI_EXCLUDE.patch
ApplyOptionalPatch 0001-iommu-arm-smmu-workaround-DMA-mode-issues.patch
ApplyOptionalPatch 0001-arm-aarch64-Drop-the-EXPERT-setting-from-ARM64_FORCE.patch
ApplyOptionalPatch 0001-Add-support-for-deprecating-processors.patch
ApplyOptionalPatch 0001-Add-efi_status_to_str-and-rework-efi_status_to_err.patch
ApplyOptionalPatch 0001-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch
ApplyOptionalPatch 0001-security-lockdown-expose-a-hook-to-lock-the-kernel-d.patch
ApplyOptionalPatch 0001-efi-Add-an-EFI_SECURE_BOOT-flag-to-indicate-secure-b.patch
ApplyOptionalPatch 0001-efi-Lock-down-the-kernel-if-booted-in-secure-boot-mo.patch
ApplyOptionalPatch 0001-s390-Lock-down-the-kernel-when-the-IPL-secure-flag-i.patch
ApplyOptionalPatch 0001-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch
ApplyOptionalPatch 0001-Rename-RH_DISABLE_DEPRECATED-to-RHEL_DIFFERENCES.patch
ApplyOptionalPatch 0001-kernel-add-SUPPORT_REMOVED-kernel-taint.patch
ApplyOptionalPatch 0001-mpt-remove-certain-deprecated-pci-ids.patch
ApplyOptionalPatch 0001-megaraid_sas-remove-deprecated-pci-ids.patch
ApplyOptionalPatch 0001-aacraid-Remove-depreciated-device-and-vendor-PCI-id-.patch
ApplyOptionalPatch 0001-qla4xxx-Remove-deprecated-PCI-IDs-from-RHEL-8.patch
ApplyOptionalPatch 0001-hpsa-remove-old-cciss-based-smartarray-pci-ids.patch
ApplyOptionalPatch 0001-mptspi-Taint-kernel-if-mptspi-is-loaded.patch
ApplyOptionalPatch 0001-be2iscsi-remove-unsupported-device-IDs.patch
ApplyOptionalPatch 0001-qla2xxx-Remove-PCI-IDs-of-deprecated-adapter.patch
ApplyOptionalPatch 0001-mptspi-pci-id-table-changes.patch
ApplyOptionalPatch 0001-mptsas-Taint-kernel-if-mptsas-is-loaded.patch
ApplyOptionalPatch 0001-mptsas-pci-id-table-changes.patch
ApplyOptionalPatch 0001-Removing-Obsolete-hba-pci-ids-from-rhel8.patch
ApplyOptionalPatch 0001-redhat-rh_kabi-Add-macros-to-size-and-extend-structs.patch
ApplyOptionalPatch 0001-redhat-rh_kabi-Fix-RH_KABI_SET_SIZE-to-use-dereferen.patch
ApplyOptionalPatch 0001-redhat-rh_kabi-Indirect-EXTEND-macros-so-nesting-of-.patch
ApplyOptionalPatch 0001-redhat-rh_kabi-introduce-RH_KABI_EXTEND_WITH_SIZE.patch
ApplyOptionalPatch 0001-redhat-rh_kabi-add-a-comment-with-warning-about-RH_K.patch
ApplyOptionalPatch 0001-redhat-rh_kabi-deduplication-friendly-structs.patch
ApplyOptionalPatch 0001-arm-make-CONFIG_HIGHPTE-optional-without-CONFIG_EXPE.patch
ApplyOptionalPatch 0001-ARM-tegra-usb-no-reset.patch
ApplyOptionalPatch 0001-Input-rmi4-remove-the-need-for-artificial-IRQ-in-cas.patch
ApplyOptionalPatch 0001-Drop-that-for-now.patch
ApplyOptionalPatch 0001-KEYS-Make-use-of-platform-keyring-for-module-signatu.patch
ApplyOptionalPatch 0001-mm-kmemleak-skip-late_init-if-not-skip-disable.patch
ApplyOptionalPatch 0001-ARM-fix-__get_user_check-in-case-uaccess_-calls-are-.patch
ApplyOptionalPatch 0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch
ApplyOptionalPatch 0001-drm-panel-add-Xingbangda-XBD599-panel.patch
ApplyOptionalPatch 0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch
ApplyOptionalPatch 0001-e1000e-bump-up-timeout-to-wait-when-ME-un-configure-.patch
ApplyOptionalPatch 0001-x86-Fix-compile-issues-with-rh_check_supported.patch
ApplyOptionalPatch 0001-redhat-Replace-hardware.redhat.com-link-in-Unsupport.patch
ApplyOptionalPatch 0001-arch-x86-Remove-vendor-specific-CPU-ID-checks.patch
ApplyOptionalPatch 0001-Fixes-acpi-prefer-booting-with-ACPI-over-DTS-to-be-R.patch
ApplyOptionalPatch 0001-Work-around-for-gcc-bug-https-gcc.gnu.org-bugzilla-s.patch
ApplyOptionalPatch 0001-Temporarily-remove-cdomain-from-sphinx-documentation.patch
ApplyOptionalPatch 0001-Filter-out-LTO-build-options-from-the-perl-ccopts.patch
%endif %endif
ApplyOptionalPatch linux-kernel-test.patch ApplyOptionalPatch linux-kernel-test.patch
@ -2072,6 +1923,7 @@ BuildKernel %make_target %kernel_image %{_use_vdso}
%global perf_make \ %global perf_make \
%{__make} -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} PYTHON=%{__python3} %{__make} -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} PYTHON=%{__python3}
%if %{with_perf} %if %{with_perf}
%global _lto_cflags %{nil}
# perf # perf
# make sure check-headers.sh is executable # make sure check-headers.sh is executable
chmod +x tools/perf/check-headers.sh chmod +x tools/perf/check-headers.sh
@ -2795,6 +2647,22 @@ fi
# #
# #
%changelog %changelog
* Wed Oct 07 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc8.20201007git7575fdda569b.29]
- Merge ark-patches
* Wed Oct 07 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc8.20201007git7575fdda569b.28.test]
- 7575fdda569b rebase
- New configs in drivers/misc (Jeremy Cline)
- New configs in drivers/net/wireless ("Justin M. Forbes")
- New configs in drivers/phy (Fedora Kernel Team)
- New configs in drivers/tty (Fedora Kernel Team)
* Tue Oct 06 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc8.28]
- Merge ark-patches
* Tue Oct 06 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc8.27.test]
- Updated changelog for the release based on v5.9-rc8 (Fedora Kernel Team)
* Mon Oct 05 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc8.27] * Mon Oct 05 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.9.0-0.rc8.27]
- Merge ark-patches - Merge ark-patches

3135
patch-5.9.0-redhat.patch Normal file

File diff suppressed because it is too large Load Diff

View File

@ -1,3 +1,3 @@
SHA512 (linux-5.9-rc8.tar.xz) = 5a0e619e9a4e39edd9412d85fb66446115e65c19e4c870745c70aeb29b9cae2b6f061eeb0d22f647febc8c75828cc848eed6c3d5709386f20856453ec184be01 SHA512 (linux-20201007git7575fdda569b.tar.xz) = 277bb4113205b0eb33835058de34c07a941b0291e12b0e819bd028886dbec10b65eda716dd4eb4a2c0f9c0caaef13ed2895368ea9608905973f6eb6320b73344
SHA512 (kernel-abi-whitelists-5.9.0-0.rc8.28.tar.bz2) = 85329a42c29a3e7f4475f9afada031a7b14b22297d1954e1b79d854213df0a00d5513a309a8fdceff15dbb8f416a17256b523302df61aad83cd2d1e5803d5fe2 SHA512 (kernel-abi-whitelists-5.9.0-0.rc8.20201007git7575fdda569b.30.tar.bz2) = f39227648b2f61a4801413d955ce50c5dbcf58522283bb1b6b0b6acc6c5c60ce8c507bab4275a922d5e25c3cb91739c843d3da92e59fed8d8c61e7d2b968426c
SHA512 (kernel-kabi-dw-5.9.0-0.rc8.28.tar.bz2) = 25fefaff419a177a936c1198aea9289b5a92167486bb5fd705cb2ecd142af5514cc27ee42208160dda171a99f83ed2c8f74e59815a806b1953b3c623289c9b67 SHA512 (kernel-kabi-dw-5.9.0-0.rc8.20201007git7575fdda569b.30.tar.bz2) = 0ad20d342cc910121969311edfe2f655757af968ca96fb5ccd31b2dfa99b16f7afd4654204f25ccbcf57526b501f687012fe9048b74fb3875511e122b3c07908