From 5c860185af2788138c9bed235283a38186829ef2 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Feb 2013 11:21:29 -0500 Subject: [PATCH] Backport support for newer ALPS touchpads (rhbz 812111) --- alps-v2.patch | 2494 +++++++++++++++++++++++++++++++++++++++++++++++++ kernel.spec | 9 +- 2 files changed, 2502 insertions(+), 1 deletion(-) create mode 100644 alps-v2.patch diff --git a/alps-v2.patch b/alps-v2.patch new file mode 100644 index 000000000..d394c4a92 --- /dev/null +++ b/alps-v2.patch @@ -0,0 +1,2494 @@ +From f822982515378982dc8d8e6058579288d0ee3cff Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 20:55:19 -0800 +Subject: [PATCH 01/15] Input: ALPS - document the alps.h data structures + +Add kernel-doc markup. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.h | 74 ++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 61 insertions(+), 13 deletions(-) + +diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h +index ae1ac35..67be4e5 100644 +--- a/drivers/input/mouse/alps.h ++++ b/drivers/input/mouse/alps.h +@@ -17,30 +17,78 @@ + #define ALPS_PROTO_V3 2 + #define ALPS_PROTO_V4 3 + ++/** ++ * struct alps_model_info - touchpad ID table ++ * @signature: E7 response string to match. ++ * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response ++ * (aka command mode response) identifies the firmware minor version. This ++ * can be used to distinguish different hardware models which are not ++ * uniquely identifiable through their E7 responses. ++ * @proto_version: Indicates V1/V2/V3/... ++ * @byte0: Helps figure out whether a position report packet matches the ++ * known format for this model. The first byte of the report, ANDed with ++ * mask0, should match byte0. ++ * @mask0: The mask used to check the first byte of the report. ++ * @flags: Additional device capabilities (passthrough port, trackstick, etc.). ++ * ++ * Many (but not all) ALPS touchpads can be identified by looking at the ++ * values returned in the "E7 report" and/or the "EC report." This table ++ * lists a number of such touchpads. ++ */ + struct alps_model_info { +- unsigned char signature[3]; +- unsigned char command_mode_resp; /* v3/v4 only */ ++ unsigned char signature[3]; ++ unsigned char command_mode_resp; + unsigned char proto_version; +- unsigned char byte0, mask0; +- unsigned char flags; ++ unsigned char byte0, mask0; ++ unsigned char flags; + }; + ++/** ++ * struct alps_nibble_commands - encodings for register accesses ++ * @command: PS/2 command used for the nibble ++ * @data: Data supplied as an argument to the PS/2 command, if applicable ++ * ++ * The ALPS protocol uses magic sequences to transmit binary data to the ++ * touchpad, as it is generally not OK to send arbitrary bytes out the ++ * PS/2 port. Each of the sequences in this table sends one nibble of the ++ * register address or (write) data. Different versions of the ALPS protocol ++ * use slightly different encodings. ++ */ + struct alps_nibble_commands { + int command; + unsigned char data; + }; + ++/** ++ * struct alps_data - private data structure for the ALPS driver ++ * @dev2: "Relative" device used to report trackstick or mouse activity. ++ * @phys: Physical path for the relative device. ++ * @i: Information on the detected touchpad model. ++ * @nibble_commands: Command mapping used for touchpad register accesses. ++ * @addr_command: Command used to tell the touchpad that a register address ++ * follows. ++ * @prev_fin: Finger bit from previous packet. ++ * @multi_packet: Multi-packet data in progress. ++ * @multi_data: Saved multi-packet data. ++ * @x1: First X coordinate from last MT report. ++ * @x2: Second X coordinate from last MT report. ++ * @y1: First Y coordinate from last MT report. ++ * @y2: Second Y coordinate from last MT report. ++ * @fingers: Number of fingers from last MT report. ++ * @quirks: Bitmap of ALPS_QUIRK_*. ++ * @timer: Timer for flushing out the final report packet in the stream. ++ */ + struct alps_data { +- struct input_dev *dev2; /* Relative device */ +- char phys[32]; /* Phys */ +- const struct alps_model_info *i;/* Info */ ++ struct input_dev *dev2; ++ char phys[32]; ++ const struct alps_model_info *i; + const struct alps_nibble_commands *nibble_commands; +- int addr_command; /* Command to set register address */ +- int prev_fin; /* Finger bit from previous packet */ +- int multi_packet; /* Multi-packet data in progress */ +- unsigned char multi_data[6]; /* Saved multi-packet data */ +- int x1, x2, y1, y2; /* Coordinates from last MT report */ +- int fingers; /* Number of fingers from MT report */ ++ int addr_command; ++ int prev_fin; ++ int multi_packet; ++ unsigned char multi_data[6]; ++ int x1, x2, y1, y2; ++ int fingers; + u8 quirks; + struct timer_list timer; + }; +-- +1.8.1.2 + + +From 196069863604cb55061a02ad5f046c5e4054ba54 Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 20:56:33 -0800 +Subject: [PATCH 02/15] Input: ALPS - copy "model" info into alps_data struct + +Not every type of ALPS touchpad is well-suited to table-based detection. +Start moving the various alps_model_data attributes into the alps_data +struct so that we don't need a unique table entry for every possible +permutation of protocol version, flags, byte0/mask0, etc. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 63 +++++++++++++++++++++++----------------------- + drivers/input/mouse/alps.h | 14 +++++++++-- + 2 files changed, 43 insertions(+), 34 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index e229fa3..33ee6e0 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -122,10 +122,10 @@ static const struct alps_model_info alps_model_data[] = { + + /* Packet formats are described in Documentation/input/alps.txt */ + +-static bool alps_is_valid_first_byte(const struct alps_model_info *model, ++static bool alps_is_valid_first_byte(struct alps_data *priv, + unsigned char data) + { +- return (data & model->mask0) == model->byte0; ++ return (data & priv->mask0) == priv->byte0; + } + + static void alps_report_buttons(struct psmouse *psmouse, +@@ -158,14 +158,13 @@ static void alps_report_buttons(struct psmouse *psmouse, + static void alps_process_packet_v1_v2(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; +- const struct alps_model_info *model = priv->i; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; + int x, y, z, ges, fin, left, right, middle; + int back = 0, forward = 0; + +- if (model->proto_version == ALPS_PROTO_V1) { ++ if (priv->proto_version == ALPS_PROTO_V1) { + left = packet[2] & 0x10; + right = packet[2] & 0x08; + middle = 0; +@@ -181,12 +180,12 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) + z = packet[5]; + } + +- if (model->flags & ALPS_FW_BK_1) { ++ if (priv->flags & ALPS_FW_BK_1) { + back = packet[0] & 0x10; + forward = packet[2] & 4; + } + +- if (model->flags & ALPS_FW_BK_2) { ++ if (priv->flags & ALPS_FW_BK_2) { + back = packet[3] & 4; + forward = packet[2] & 4; + if ((middle = forward && back)) +@@ -196,7 +195,7 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) + ges = packet[2] & 1; + fin = packet[2] & 2; + +- if ((model->flags & ALPS_DUALPOINT) && z == 127) { ++ if ((priv->flags & ALPS_DUALPOINT) && z == 127) { + input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x)); + input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y)); + +@@ -239,15 +238,15 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) + input_report_abs(dev, ABS_PRESSURE, z); + input_report_key(dev, BTN_TOOL_FINGER, z > 0); + +- if (model->flags & ALPS_WHEEL) ++ if (priv->flags & ALPS_WHEEL) + input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07)); + +- if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { ++ if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { + input_report_key(dev, BTN_FORWARD, forward); + input_report_key(dev, BTN_BACK, back); + } + +- if (model->flags & ALPS_FOUR_BUTTONS) { ++ if (priv->flags & ALPS_FOUR_BUTTONS) { + input_report_key(dev, BTN_0, packet[2] & 4); + input_report_key(dev, BTN_1, packet[0] & 0x10); + input_report_key(dev, BTN_2, packet[3] & 4); +@@ -699,9 +698,8 @@ static void alps_process_packet_v4(struct psmouse *psmouse) + static void alps_process_packet(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; +- const struct alps_model_info *model = priv->i; + +- switch (model->proto_version) { ++ switch (priv->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: + alps_process_packet_v1_v2(psmouse); +@@ -765,7 +763,7 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) + if (((psmouse->packet[3] | + psmouse->packet[4] | + psmouse->packet[5]) & 0x80) || +- (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) { ++ (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) { + psmouse_dbg(psmouse, + "refusing packet %4ph (suspected interleaved ps/2)\n", + psmouse->packet + 3); +@@ -844,7 +842,6 @@ static void alps_flush_packet(unsigned long data) + static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; +- const struct alps_model_info *model = priv->i; + + if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */ + if (psmouse->pktcnt == 3) { +@@ -857,15 +854,15 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) + + /* Check for PS/2 packet stuffed in the middle of ALPS packet. */ + +- if ((model->flags & ALPS_PS2_INTERLEAVED) && ++ if ((priv->flags & ALPS_PS2_INTERLEAVED) && + psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) { + return alps_handle_interleaved_ps2(psmouse); + } + +- if (!alps_is_valid_first_byte(model, psmouse->packet[0])) { ++ if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) { + psmouse_dbg(psmouse, + "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n", +- psmouse->packet[0], model->mask0, model->byte0); ++ psmouse->packet[0], priv->mask0, priv->byte0); + return PSMOUSE_BAD_DATA; + } + +@@ -1190,16 +1187,16 @@ static int alps_poll(struct psmouse *psmouse) + unsigned char buf[sizeof(psmouse->packet)]; + bool poll_failed; + +- if (priv->i->flags & ALPS_PASS) ++ if (priv->flags & ALPS_PASS) + alps_passthrough_mode_v2(psmouse, true); + + poll_failed = ps2_command(&psmouse->ps2dev, buf, + PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0; + +- if (priv->i->flags & ALPS_PASS) ++ if (priv->flags & ALPS_PASS) + alps_passthrough_mode_v2(psmouse, false); + +- if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0) ++ if (poll_failed || (buf[0] & priv->mask0) != priv->byte0) + return -1; + + if ((psmouse->badbyte & 0xc8) == 0x08) { +@@ -1217,9 +1214,8 @@ static int alps_poll(struct psmouse *psmouse) + static int alps_hw_init_v1_v2(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; +- const struct alps_model_info *model = priv->i; + +- if ((model->flags & ALPS_PASS) && ++ if ((priv->flags & ALPS_PASS) && + alps_passthrough_mode_v2(psmouse, true)) { + return -1; + } +@@ -1234,7 +1230,7 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse) + return -1; + } + +- if ((model->flags & ALPS_PASS) && ++ if ((priv->flags & ALPS_PASS) && + alps_passthrough_mode_v2(psmouse, false)) { + return -1; + } +@@ -1520,10 +1516,9 @@ error: + static int alps_hw_init(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; +- const struct alps_model_info *model = priv->i; + int ret = -1; + +- switch (model->proto_version) { ++ switch (priv->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: + ret = alps_hw_init_v1_v2(psmouse); +@@ -1585,7 +1580,10 @@ int alps_init(struct psmouse *psmouse) + if (!model) + goto init_fail; + +- priv->i = model; ++ priv->proto_version = model->proto_version; ++ priv->byte0 = model->byte0; ++ priv->mask0 = model->mask0; ++ priv->flags = model->flags; + + if (alps_hw_init(psmouse)) + goto init_fail; +@@ -1609,7 +1607,7 @@ int alps_init(struct psmouse *psmouse) + + dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); + +- switch (model->proto_version) { ++ switch (priv->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: + input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); +@@ -1633,17 +1631,17 @@ int alps_init(struct psmouse *psmouse) + + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); + +- if (model->flags & ALPS_WHEEL) { ++ if (priv->flags & ALPS_WHEEL) { + dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); + dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL); + } + +- if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { ++ if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { + dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD); + dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK); + } + +- if (model->flags & ALPS_FOUR_BUTTONS) { ++ if (priv->flags & ALPS_FOUR_BUTTONS) { + dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0); + dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); + dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); +@@ -1654,7 +1652,8 @@ int alps_init(struct psmouse *psmouse) + + snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys); + dev2->phys = priv->phys; +- dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; ++ dev2->name = (priv->flags & ALPS_DUALPOINT) ? ++ "DualPoint Stick" : "PS/2 Mouse"; + dev2->id.bustype = BUS_I8042; + dev2->id.vendor = 0x0002; + dev2->id.product = PSMOUSE_ALPS; +@@ -1673,7 +1672,7 @@ int alps_init(struct psmouse *psmouse) + psmouse->poll = alps_poll; + psmouse->disconnect = alps_disconnect; + psmouse->reconnect = alps_reconnect; +- psmouse->pktsize = model->proto_version == ALPS_PROTO_V4 ? 8 : 6; ++ psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6; + + /* We are having trouble resyncing ALPS touchpads so disable it for now */ + psmouse->resync_time = 0; +diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h +index 67be4e5..efd0eea 100644 +--- a/drivers/input/mouse/alps.h ++++ b/drivers/input/mouse/alps.h +@@ -63,10 +63,15 @@ struct alps_nibble_commands { + * struct alps_data - private data structure for the ALPS driver + * @dev2: "Relative" device used to report trackstick or mouse activity. + * @phys: Physical path for the relative device. +- * @i: Information on the detected touchpad model. + * @nibble_commands: Command mapping used for touchpad register accesses. + * @addr_command: Command used to tell the touchpad that a register address + * follows. ++ * @proto_version: Indicates V1/V2/V3/... ++ * @byte0: Helps figure out whether a position report packet matches the ++ * known format for this model. The first byte of the report, ANDed with ++ * mask0, should match byte0. ++ * @mask0: The mask used to check the first byte of the report. ++ * @flags: Additional device capabilities (passthrough port, trackstick, etc.). + * @prev_fin: Finger bit from previous packet. + * @multi_packet: Multi-packet data in progress. + * @multi_data: Saved multi-packet data. +@@ -81,9 +86,14 @@ struct alps_nibble_commands { + struct alps_data { + struct input_dev *dev2; + char phys[32]; +- const struct alps_model_info *i; ++ ++ /* these are autodetected when the device is identified */ + const struct alps_nibble_commands *nibble_commands; + int addr_command; ++ unsigned char proto_version; ++ unsigned char byte0, mask0; ++ unsigned char flags; ++ + int prev_fin; + int multi_packet; + unsigned char multi_data[6]; +-- +1.8.1.2 + + +From b856c913996a38ced60bdf41aeae4da00882bf1f Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 20:57:04 -0800 +Subject: [PATCH 03/15] Input: ALPS - move alps_get_model() down below hw_init + code + +This will minimize the number of forward declarations needed when +alps_get_model() starts assigning function pointers. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 186 ++++++++++++++++++++++----------------------- + 1 file changed, 93 insertions(+), 93 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index 33ee6e0..c473549 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -998,99 +998,6 @@ static inline int alps_exit_command_mode(struct psmouse *psmouse) + return 0; + } + +-static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version) +-{ +- struct ps2dev *ps2dev = &psmouse->ps2dev; +- static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 }; +- unsigned char param[4]; +- const struct alps_model_info *model = NULL; +- int i; +- +- /* +- * First try "E6 report". +- * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. +- * The bits 0-2 of the first byte will be 1s if some buttons are +- * pressed. +- */ +- param[0] = 0; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) +- return NULL; +- +- param[0] = param[1] = param[2] = 0xff; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) +- return NULL; +- +- psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x", +- param[0], param[1], param[2]); +- +- if ((param[0] & 0xf8) != 0 || param[1] != 0 || +- (param[2] != 10 && param[2] != 100)) +- return NULL; +- +- /* +- * Now try "E7 report". Allowed responses are in +- * alps_model_data[].signature +- */ +- param[0] = 0; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21)) +- return NULL; +- +- param[0] = param[1] = param[2] = 0xff; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) +- return NULL; +- +- psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x", +- param[0], param[1], param[2]); +- +- if (version) { +- for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++) +- /* empty */; +- *version = (param[0] << 8) | (param[1] << 4) | i; +- } +- +- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { +- if (!memcmp(param, alps_model_data[i].signature, +- sizeof(alps_model_data[i].signature))) { +- model = alps_model_data + i; +- break; +- } +- } +- +- if (model && model->proto_version > ALPS_PROTO_V2) { +- /* +- * Need to check command mode response to identify +- * model +- */ +- model = NULL; +- if (alps_enter_command_mode(psmouse, param)) { +- psmouse_warn(psmouse, +- "touchpad failed to enter command mode\n"); +- } else { +- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { +- if (alps_model_data[i].proto_version > ALPS_PROTO_V2 && +- alps_model_data[i].command_mode_resp == param[0]) { +- model = alps_model_data + i; +- break; +- } +- } +- alps_exit_command_mode(psmouse); +- +- if (!model) +- psmouse_dbg(psmouse, +- "Unknown command mode response %2.2x\n", +- param[0]); +- } +- } +- +- return model; +-} +- + /* + * For DualPoint devices select the device that should respond to + * subsequent commands. It looks like glidepad is behind stickpointer, +@@ -1534,6 +1441,99 @@ static int alps_hw_init(struct psmouse *psmouse) + return ret; + } + ++static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 }; ++ unsigned char param[4]; ++ const struct alps_model_info *model = NULL; ++ int i; ++ ++ /* ++ * First try "E6 report". ++ * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. ++ * The bits 0-2 of the first byte will be 1s if some buttons are ++ * pressed. ++ */ ++ param[0] = 0; ++ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) ++ return NULL; ++ ++ param[0] = param[1] = param[2] = 0xff; ++ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ return NULL; ++ ++ psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x", ++ param[0], param[1], param[2]); ++ ++ if ((param[0] & 0xf8) != 0 || param[1] != 0 || ++ (param[2] != 10 && param[2] != 100)) ++ return NULL; ++ ++ /* ++ * Now try "E7 report". Allowed responses are in ++ * alps_model_data[].signature ++ */ ++ param[0] = 0; ++ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21)) ++ return NULL; ++ ++ param[0] = param[1] = param[2] = 0xff; ++ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ return NULL; ++ ++ psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x", ++ param[0], param[1], param[2]); ++ ++ if (version) { ++ for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++) ++ /* empty */; ++ *version = (param[0] << 8) | (param[1] << 4) | i; ++ } ++ ++ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { ++ if (!memcmp(param, alps_model_data[i].signature, ++ sizeof(alps_model_data[i].signature))) { ++ model = alps_model_data + i; ++ break; ++ } ++ } ++ ++ if (model && model->proto_version > ALPS_PROTO_V2) { ++ /* ++ * Need to check command mode response to identify ++ * model ++ */ ++ model = NULL; ++ if (alps_enter_command_mode(psmouse, param)) { ++ psmouse_warn(psmouse, ++ "touchpad failed to enter command mode\n"); ++ } else { ++ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { ++ if (alps_model_data[i].proto_version > ALPS_PROTO_V2 && ++ alps_model_data[i].command_mode_resp == param[0]) { ++ model = alps_model_data + i; ++ break; ++ } ++ } ++ alps_exit_command_mode(psmouse); ++ ++ if (!model) ++ psmouse_dbg(psmouse, ++ "Unknown command mode response %2.2x\n", ++ param[0]); ++ } ++ } ++ ++ return model; ++} ++ + static int alps_reconnect(struct psmouse *psmouse) + { + const struct alps_model_info *model; +-- +1.8.1.2 + + +From b719d56d5743e2c338568f4edb6eab17ea9c9eec Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:19:01 -0800 +Subject: [PATCH 04/15] Input: ALPS - introduce helper function for repeated + commands + +Several ALPS driver init sequences repeat a command three times, then +issue PSMOUSE_CMD_GETINFO to read the result. Move this into a helper +function to simplify the code. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 71 ++++++++++++++++++++-------------------------- + 1 file changed, 30 insertions(+), 41 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index c473549..1ca854b 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -964,24 +964,42 @@ static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr, + return __alps_command_mode_write_reg(psmouse, value); + } + ++static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, ++ int repeated_command, unsigned char *param) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ ++ param[0] = 0; ++ if (init_command && ps2_command(ps2dev, param, init_command)) ++ return -EIO; ++ ++ if (ps2_command(ps2dev, NULL, repeated_command) || ++ ps2_command(ps2dev, NULL, repeated_command) || ++ ps2_command(ps2dev, NULL, repeated_command)) ++ return -EIO; ++ ++ param[0] = param[1] = param[2] = 0xff; ++ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ return -EIO; ++ ++ psmouse_dbg(psmouse, "%2.2X report: %2.2x %2.2x %2.2x\n", ++ repeated_command, param[0], param[1], param[2]); ++ return 0; ++} ++ + static int alps_enter_command_mode(struct psmouse *psmouse, + unsigned char *resp) + { + unsigned char param[4]; +- struct ps2dev *ps2dev = &psmouse->ps2dev; + +- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || +- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { ++ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) { + psmouse_err(psmouse, "failed to enter command mode\n"); + return -1; + } + + if (param[0] != 0x88 && param[1] != 0x07) { + psmouse_dbg(psmouse, +- "unknown response while entering command mode: %2.2x %2.2x %2.2x\n", +- param[0], param[1], param[2]); ++ "unknown response while entering command mode\n"); + return -1; + } + +@@ -1041,18 +1059,10 @@ static int alps_absolute_mode_v1_v2(struct psmouse *psmouse) + + static int alps_get_status(struct psmouse *psmouse, char *param) + { +- struct ps2dev *ps2dev = &psmouse->ps2dev; +- + /* Get status: 0xF5 0xF5 0xF5 0xE9 */ +- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || +- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param)) + return -1; + +- psmouse_dbg(psmouse, "Status: %2.2x %2.2x %2.2x", +- param[0], param[1], param[2]); +- + return 0; + } + +@@ -1443,7 +1453,6 @@ static int alps_hw_init(struct psmouse *psmouse) + + static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version) + { +- struct ps2dev *ps2dev = &psmouse->ps2dev; + static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 }; + unsigned char param[4]; + const struct alps_model_info *model = NULL; +@@ -1455,20 +1464,10 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int + * The bits 0-2 of the first byte will be 1s if some buttons are + * pressed. + */ +- param[0] = 0; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) +- return NULL; +- +- param[0] = param[1] = param[2] = 0xff; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE11, ++ param)) + return NULL; + +- psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x", +- param[0], param[1], param[2]); +- + if ((param[0] & 0xf8) != 0 || param[1] != 0 || + (param[2] != 10 && param[2] != 100)) + return NULL; +@@ -1477,20 +1476,10 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int + * Now try "E7 report". Allowed responses are in + * alps_model_data[].signature + */ +- param[0] = 0; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21)) +- return NULL; +- +- param[0] = param[1] = param[2] = 0xff; +- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE21, ++ param)) + return NULL; + +- psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x", +- param[0], param[1], param[2]); +- + if (version) { + for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++) + /* empty */; +-- +1.8.1.2 + + +From c7fd5d0e90f577072ece70651aeecb37f62f5fdb Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:19:59 -0800 +Subject: [PATCH 05/15] Input: ALPS - rework detection sequence + +If the E6 report test passes, get the E7 and EC reports right away and +then try to match an entry in the table. + +Pass in the alps_data struct, so that the detection code will be able to +set operating parameters based on information found during detection. + +Change the version (psmouse->model) to report the protocol version only, +in preparation for supporting models that do not show up in the ID table. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 124 +++++++++++++++++++-------------------------- + drivers/input/mouse/alps.h | 8 +-- + 2 files changed, 56 insertions(+), 76 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index 1ca854b..e6a27a5 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -1451,86 +1451,76 @@ static int alps_hw_init(struct psmouse *psmouse) + return ret; + } + +-static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version) ++static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv, ++ unsigned char *e7, unsigned char *ec) + { +- static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 }; +- unsigned char param[4]; +- const struct alps_model_info *model = NULL; ++ const struct alps_model_info *model; + int i; + ++ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { ++ model = &alps_model_data[i]; ++ ++ if (!memcmp(e7, model->signature, sizeof(model->signature)) && ++ (!model->command_mode_resp || ++ model->command_mode_resp == ec[2])) { ++ ++ priv->proto_version = model->proto_version; ++ priv->flags = model->flags; ++ priv->byte0 = model->byte0; ++ priv->mask0 = model->mask0; ++ ++ return 0; ++ } ++ } ++ ++ return -EINVAL; ++} ++ ++static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) ++{ ++ unsigned char e6[4], e7[4], ec[4]; ++ + /* + * First try "E6 report". + * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. + * The bits 0-2 of the first byte will be 1s if some buttons are + * pressed. + */ +- if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE11, +- param)) +- return NULL; ++ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, ++ PSMOUSE_CMD_SETSCALE11, e6)) ++ return -EIO; + +- if ((param[0] & 0xf8) != 0 || param[1] != 0 || +- (param[2] != 10 && param[2] != 100)) +- return NULL; ++ if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100)) ++ return -EINVAL; + + /* +- * Now try "E7 report". Allowed responses are in +- * alps_model_data[].signature ++ * Now get the "E7" and "EC" reports. These will uniquely identify ++ * most ALPS touchpads. + */ +- if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE21, +- param)) +- return NULL; +- +- if (version) { +- for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++) +- /* empty */; +- *version = (param[0] << 8) | (param[1] << 4) | i; +- } +- +- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { +- if (!memcmp(param, alps_model_data[i].signature, +- sizeof(alps_model_data[i].signature))) { +- model = alps_model_data + i; +- break; +- } +- } ++ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, ++ PSMOUSE_CMD_SETSCALE21, e7) || ++ alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, ++ PSMOUSE_CMD_RESET_WRAP, ec) || ++ alps_exit_command_mode(psmouse)) ++ return -EIO; + +- if (model && model->proto_version > ALPS_PROTO_V2) { +- /* +- * Need to check command mode response to identify +- * model +- */ +- model = NULL; +- if (alps_enter_command_mode(psmouse, param)) { +- psmouse_warn(psmouse, +- "touchpad failed to enter command mode\n"); +- } else { +- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { +- if (alps_model_data[i].proto_version > ALPS_PROTO_V2 && +- alps_model_data[i].command_mode_resp == param[0]) { +- model = alps_model_data + i; +- break; +- } +- } +- alps_exit_command_mode(psmouse); ++ if (alps_match_table(psmouse, priv, e7, ec) == 0) ++ return 0; + +- if (!model) +- psmouse_dbg(psmouse, +- "Unknown command mode response %2.2x\n", +- param[0]); +- } +- } ++ psmouse_info(psmouse, ++ "Unknown ALPS touchpad: E7=%2.2x %2.2x %2.2x, EC=%2.2x %2.2x %2.2x\n", ++ e7[0], e7[1], e7[2], ec[0], ec[1], ec[2]); + +- return model; ++ return -EINVAL; + } + + static int alps_reconnect(struct psmouse *psmouse) + { +- const struct alps_model_info *model; ++ struct alps_data *priv = psmouse->private; + + psmouse_reset(psmouse); + +- model = alps_get_model(psmouse, NULL); +- if (!model) ++ if (alps_identify(psmouse, priv) < 0) + return -1; + + return alps_hw_init(psmouse); +@@ -1549,9 +1539,7 @@ static void alps_disconnect(struct psmouse *psmouse) + int alps_init(struct psmouse *psmouse) + { + struct alps_data *priv; +- const struct alps_model_info *model; + struct input_dev *dev1 = psmouse->dev, *dev2; +- int version; + + priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL); + dev2 = input_allocate_device(); +@@ -1565,15 +1553,9 @@ int alps_init(struct psmouse *psmouse) + + psmouse_reset(psmouse); + +- model = alps_get_model(psmouse, &version); +- if (!model) ++ if (alps_identify(psmouse, priv) < 0) + goto init_fail; + +- priv->proto_version = model->proto_version; +- priv->byte0 = model->byte0; +- priv->mask0 = model->mask0; +- priv->flags = model->flags; +- + if (alps_hw_init(psmouse)) + goto init_fail; + +@@ -1678,18 +1660,16 @@ init_fail: + + int alps_detect(struct psmouse *psmouse, bool set_properties) + { +- int version; +- const struct alps_model_info *model; ++ struct alps_data dummy; + +- model = alps_get_model(psmouse, &version); +- if (!model) ++ if (alps_identify(psmouse, &dummy) < 0) + return -1; + + if (set_properties) { + psmouse->vendor = "ALPS"; +- psmouse->name = model->flags & ALPS_DUALPOINT ? ++ psmouse->name = dummy.flags & ALPS_DUALPOINT ? + "DualPoint TouchPad" : "GlidePoint"; +- psmouse->model = version; ++ psmouse->model = dummy.proto_version << 8; + } + return 0; + } +diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h +index efd0eea..a81b318 100644 +--- a/drivers/input/mouse/alps.h ++++ b/drivers/input/mouse/alps.h +@@ -12,10 +12,10 @@ + #ifndef _ALPS_H + #define _ALPS_H + +-#define ALPS_PROTO_V1 0 +-#define ALPS_PROTO_V2 1 +-#define ALPS_PROTO_V3 2 +-#define ALPS_PROTO_V4 3 ++#define ALPS_PROTO_V1 1 ++#define ALPS_PROTO_V2 2 ++#define ALPS_PROTO_V3 3 ++#define ALPS_PROTO_V4 4 + + /** + * struct alps_model_info - touchpad ID table +-- +1.8.1.2 + + +From c7fb8a63ba1257e2ee829425ef7197c7cbe893a1 Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:22:08 -0800 +Subject: [PATCH 06/15] Input: ALPS - use function pointers for different + protocol handlers + +In anticipation of adding more ALPS protocols and more per-device quirks, +use function pointers instead of switch statements to call functions that +differ from one device to the next. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 101 +++++++++++++++++++++------------------------ + drivers/input/mouse/alps.h | 7 ++++ + 2 files changed, 54 insertions(+), 54 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index e6a27a5..fe45687 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -114,6 +114,11 @@ static const struct alps_model_info alps_model_data[] = { + { { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 }, + }; + ++static void alps_set_abs_params_st(struct alps_data *priv, ++ struct input_dev *dev1); ++static void alps_set_abs_params_mt(struct alps_data *priv, ++ struct input_dev *dev1); ++ + /* + * XXX - this entry is suspicious. First byte has zero lower nibble, + * which is what a normal mouse would report. Also, the value 0x0e +@@ -695,24 +700,6 @@ static void alps_process_packet_v4(struct psmouse *psmouse) + input_sync(dev); + } + +-static void alps_process_packet(struct psmouse *psmouse) +-{ +- struct alps_data *priv = psmouse->private; +- +- switch (priv->proto_version) { +- case ALPS_PROTO_V1: +- case ALPS_PROTO_V2: +- alps_process_packet_v1_v2(psmouse); +- break; +- case ALPS_PROTO_V3: +- alps_process_packet_v3(psmouse); +- break; +- case ALPS_PROTO_V4: +- alps_process_packet_v4(psmouse); +- break; +- } +-} +- + static void alps_report_bare_ps2_packet(struct psmouse *psmouse, + unsigned char packet[], + bool report_buttons) +@@ -770,7 +757,7 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) + return PSMOUSE_BAD_DATA; + } + +- alps_process_packet(psmouse); ++ priv->process_packet(psmouse); + + /* Continue with the next packet */ + psmouse->packet[0] = psmouse->packet[6]; +@@ -814,6 +801,7 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) + static void alps_flush_packet(unsigned long data) + { + struct psmouse *psmouse = (struct psmouse *)data; ++ struct alps_data *priv = psmouse->private; + + serio_pause_rx(psmouse->ps2dev.serio); + +@@ -831,7 +819,7 @@ static void alps_flush_packet(unsigned long data) + "refusing packet %3ph (suspected interleaved ps/2)\n", + psmouse->packet + 3); + } else { +- alps_process_packet(psmouse); ++ priv->process_packet(psmouse); + } + psmouse->pktcnt = 0; + } +@@ -876,7 +864,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) + } + + if (psmouse->pktcnt == psmouse->pktsize) { +- alps_process_packet(psmouse); ++ priv->process_packet(psmouse); + return PSMOUSE_FULL_PACKET; + } + +@@ -1430,25 +1418,26 @@ error: + return -1; + } + +-static int alps_hw_init(struct psmouse *psmouse) ++static void alps_set_defaults(struct alps_data *priv) + { +- struct alps_data *priv = psmouse->private; +- int ret = -1; +- + switch (priv->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: +- ret = alps_hw_init_v1_v2(psmouse); ++ priv->hw_init = alps_hw_init_v1_v2; ++ priv->process_packet = alps_process_packet_v1_v2; ++ priv->set_abs_params = alps_set_abs_params_st; + break; + case ALPS_PROTO_V3: +- ret = alps_hw_init_v3(psmouse); ++ priv->hw_init = alps_hw_init_v3; ++ priv->process_packet = alps_process_packet_v3; ++ priv->set_abs_params = alps_set_abs_params_mt; + break; + case ALPS_PROTO_V4: +- ret = alps_hw_init_v4(psmouse); ++ priv->hw_init = alps_hw_init_v4; ++ priv->process_packet = alps_process_packet_v4; ++ priv->set_abs_params = alps_set_abs_params_mt; + break; + } +- +- return ret; + } + + static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv, +@@ -1465,6 +1454,8 @@ static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv, + model->command_mode_resp == ec[2])) { + + priv->proto_version = model->proto_version; ++ alps_set_defaults(priv); ++ + priv->flags = model->flags; + priv->byte0 = model->byte0; + priv->mask0 = model->mask0; +@@ -1523,7 +1514,7 @@ static int alps_reconnect(struct psmouse *psmouse) + if (alps_identify(psmouse, priv) < 0) + return -1; + +- return alps_hw_init(psmouse); ++ return priv->hw_init(psmouse); + } + + static void alps_disconnect(struct psmouse *psmouse) +@@ -1536,6 +1527,29 @@ static void alps_disconnect(struct psmouse *psmouse) + kfree(priv); + } + ++static void alps_set_abs_params_st(struct alps_data *priv, ++ struct input_dev *dev1) ++{ ++ input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); ++ input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); ++} ++ ++static void alps_set_abs_params_mt(struct alps_data *priv, ++ struct input_dev *dev1) ++{ ++ set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); ++ input_mt_init_slots(dev1, 2, 0); ++ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); ++ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0); ++ ++ set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); ++ set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); ++ set_bit(BTN_TOOL_QUADTAP, dev1->keybit); ++ ++ input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0); ++ input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0); ++} ++ + int alps_init(struct psmouse *psmouse) + { + struct alps_data *priv; +@@ -1556,7 +1570,7 @@ int alps_init(struct psmouse *psmouse) + if (alps_identify(psmouse, priv) < 0) + goto init_fail; + +- if (alps_hw_init(psmouse)) ++ if (priv->hw_init(psmouse)) + goto init_fail; + + /* +@@ -1578,28 +1592,7 @@ int alps_init(struct psmouse *psmouse) + + dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); + +- switch (priv->proto_version) { +- case ALPS_PROTO_V1: +- case ALPS_PROTO_V2: +- input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); +- input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); +- break; +- case ALPS_PROTO_V3: +- case ALPS_PROTO_V4: +- set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); +- input_mt_init_slots(dev1, 2, 0); +- input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); +- input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0); +- +- set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); +- set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); +- set_bit(BTN_TOOL_QUADTAP, dev1->keybit); +- +- input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0); +- input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0); +- break; +- } +- ++ priv->set_abs_params(priv, dev1); + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); + + if (priv->flags & ALPS_WHEEL) { +diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h +index a81b318..0934f8b 100644 +--- a/drivers/input/mouse/alps.h ++++ b/drivers/input/mouse/alps.h +@@ -72,6 +72,9 @@ struct alps_nibble_commands { + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). ++ * @hw_init: Protocol-specific hardware init function. ++ * @process_packet: Protocol-specific function to process a report packet. ++ * @set_abs_params: Protocol-specific function to configure the input_dev. + * @prev_fin: Finger bit from previous packet. + * @multi_packet: Multi-packet data in progress. + * @multi_data: Saved multi-packet data. +@@ -94,6 +97,10 @@ struct alps_data { + unsigned char byte0, mask0; + unsigned char flags; + ++ int (*hw_init)(struct psmouse *psmouse); ++ void (*process_packet)(struct psmouse *psmouse); ++ void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); ++ + int prev_fin; + int multi_packet; + unsigned char multi_data[6]; +-- +1.8.1.2 + + +From e2600c708bef8e1c8126ca9b8d4ce1f83c002688 Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:23:04 -0800 +Subject: [PATCH 07/15] Input: ALPS - move {addr,nibble}_command settings into + alps_set_defaults() + +This allows alps_identify() to override these settings based on the +device characteristics, if it is ever necessary. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 12 ++++-------- + 1 file changed, 4 insertions(+), 8 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index fe45687..2221a00 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -1190,14 +1190,10 @@ static int alps_absolute_mode_v3(struct psmouse *psmouse) + + static int alps_hw_init_v3(struct psmouse *psmouse) + { +- struct alps_data *priv = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val; + unsigned char param[4]; + +- priv->nibble_commands = alps_v3_nibble_commands; +- priv->addr_command = PSMOUSE_CMD_RESET_WRAP; +- + if (alps_enter_command_mode(psmouse, NULL)) + goto error; + +@@ -1343,13 +1339,9 @@ static int alps_absolute_mode_v4(struct psmouse *psmouse) + + static int alps_hw_init_v4(struct psmouse *psmouse) + { +- struct alps_data *priv = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[4]; + +- priv->nibble_commands = alps_v4_nibble_commands; +- priv->addr_command = PSMOUSE_CMD_DISABLE; +- + if (alps_enter_command_mode(psmouse, NULL)) + goto error; + +@@ -1431,11 +1423,15 @@ static void alps_set_defaults(struct alps_data *priv) + priv->hw_init = alps_hw_init_v3; + priv->process_packet = alps_process_packet_v3; + priv->set_abs_params = alps_set_abs_params_mt; ++ priv->nibble_commands = alps_v3_nibble_commands; ++ priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + break; + case ALPS_PROTO_V4: + priv->hw_init = alps_hw_init_v4; + priv->process_packet = alps_process_packet_v4; + priv->set_abs_params = alps_set_abs_params_mt; ++ priv->nibble_commands = alps_v4_nibble_commands; ++ priv->addr_command = PSMOUSE_CMD_DISABLE; + break; + } + } +-- +1.8.1.2 + + +From df0bf385112a7b38c5c3d307bb9399f9f3b3bba2 Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:23:34 -0800 +Subject: [PATCH 08/15] Input: ALPS - rework detection of Pinnacle AGx + touchpads + +The official ALPS driver uses the EC report, not the E7 report, to detect +these devices. Also, they check for a range of values; the original +table-based code only checked for two specific ones. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 15 ++++++++++++--- + 1 file changed, 12 insertions(+), 3 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index 2221a00..eafeae2 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -109,8 +109,6 @@ static const struct alps_model_info alps_model_data[] = { + { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ + { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, + ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ +- { { 0x73, 0x02, 0x64 }, 0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT }, +- { { 0x73, 0x02, 0x64 }, 0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT }, + { { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 }, + }; + +@@ -1412,6 +1410,10 @@ error: + + static void alps_set_defaults(struct alps_data *priv) + { ++ priv->byte0 = 0x8f; ++ priv->mask0 = 0x8f; ++ priv->flags = ALPS_DUALPOINT; ++ + switch (priv->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: +@@ -1491,8 +1493,15 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) + alps_exit_command_mode(psmouse)) + return -EIO; + +- if (alps_match_table(psmouse, priv, e7, ec) == 0) ++ if (alps_match_table(psmouse, priv, e7, ec) == 0) { ++ return 0; ++ } else if (ec[0] == 0x88 && ec[1] == 0x07 && ++ ec[2] >= 0x90 && ec[2] <= 0x9d) { ++ priv->proto_version = ALPS_PROTO_V3; ++ alps_set_defaults(priv); ++ + return 0; ++ } + + psmouse_info(psmouse, + "Unknown ALPS touchpad: E7=%2.2x %2.2x %2.2x, EC=%2.2x %2.2x %2.2x\n", +-- +1.8.1.2 + + +From 8e6493f800dc08a28abd59dfe63790aaade0c700 Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:24:22 -0800 +Subject: [PATCH 09/15] Input: ALPS - fix command mode check + +Pinnacle class devices should return "88 07 xx" or "88 08 xx" when +entering command mode. If either the first byte or the second byte is +invalid, return an error. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index eafeae2..bfc1938 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -983,7 +983,7 @@ static int alps_enter_command_mode(struct psmouse *psmouse, + return -1; + } + +- if (param[0] != 0x88 && param[1] != 0x07) { ++ if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) { + psmouse_dbg(psmouse, + "unknown response while entering command mode\n"); + return -1; +-- +1.8.1.2 + + +From 0302b4c4a1b4201bf82a45c46084f3ccd0ee696f Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:24:55 -0800 +Subject: [PATCH 10/15] Input: ALPS - move pixel and bitmap info into alps_data + struct + +Newer touchpads use different constants, so make them runtime- +configurable. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 47 ++++++++++++++++++++++++---------------------- + drivers/input/mouse/alps.h | 8 ++++++++ + 2 files changed, 33 insertions(+), 22 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index bfc1938..2cd8be7 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -27,12 +27,6 @@ + /* + * Definitions for ALPS version 3 and 4 command mode protocol + */ +-#define ALPS_V3_X_MAX 2000 +-#define ALPS_V3_Y_MAX 1400 +- +-#define ALPS_BITMAP_X_BITS 15 +-#define ALPS_BITMAP_Y_BITS 11 +- + #define ALPS_CMD_NIBBLE_10 0x01f2 + + static const struct alps_nibble_commands alps_v3_nibble_commands[] = { +@@ -269,7 +263,8 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) + * These points are returned in x1, y1, x2, and y2 when the return value + * is greater than 0. + */ +-static int alps_process_bitmap(unsigned int x_map, unsigned int y_map, ++static int alps_process_bitmap(struct alps_data *priv, ++ unsigned int x_map, unsigned int y_map, + int *x1, int *y1, int *x2, int *y2) + { + struct alps_bitmap_point { +@@ -311,7 +306,7 @@ static int alps_process_bitmap(unsigned int x_map, unsigned int y_map, + * y bitmap is reversed for what we need (lower positions are in + * higher bits), so we process from the top end. + */ +- y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS); ++ y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits); + prev_bit = 0; + point = &y_low; + for (i = 0; y_map != 0; i++, y_map <<= 1) { +@@ -357,16 +352,18 @@ static int alps_process_bitmap(unsigned int x_map, unsigned int y_map, + } + } + +- *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) / +- (2 * (ALPS_BITMAP_X_BITS - 1)); +- *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) / +- (2 * (ALPS_BITMAP_Y_BITS - 1)); ++ *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / ++ (2 * (priv->x_bits - 1)); ++ *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / ++ (2 * (priv->y_bits - 1)); + + if (fingers > 1) { +- *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) / +- (2 * (ALPS_BITMAP_X_BITS - 1)); +- *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) / +- (2 * (ALPS_BITMAP_Y_BITS - 1)); ++ *x2 = (priv->x_max * ++ (2 * x_high.start_bit + x_high.num_bits - 1)) / ++ (2 * (priv->x_bits - 1)); ++ *y2 = (priv->y_max * ++ (2 * y_high.start_bit + y_high.num_bits - 1)) / ++ (2 * (priv->y_bits - 1)); + } + + return fingers; +@@ -484,7 +481,8 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + ((packet[2] & 0x7f) << 1) | + (packet[4] & 0x01); + +- bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap, ++ bmap_fingers = alps_process_bitmap(priv, ++ x_bitmap, y_bitmap, + &x1, &y1, &x2, &y2); + + /* +@@ -641,7 +639,7 @@ static void alps_process_packet_v4(struct psmouse *psmouse) + ((priv->multi_data[3] & 0x1f) << 5) | + (priv->multi_data[1] & 0x1f); + +- fingers = alps_process_bitmap(x_bitmap, y_bitmap, ++ fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap, + &x1, &y1, &x2, &y2); + + /* Store MT data.*/ +@@ -1414,6 +1412,11 @@ static void alps_set_defaults(struct alps_data *priv) + priv->mask0 = 0x8f; + priv->flags = ALPS_DUALPOINT; + ++ priv->x_max = 2000; ++ priv->y_max = 1400; ++ priv->x_bits = 15; ++ priv->y_bits = 11; ++ + switch (priv->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: +@@ -1544,15 +1547,15 @@ static void alps_set_abs_params_mt(struct alps_data *priv, + { + set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); + input_mt_init_slots(dev1, 2, 0); +- input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); +- input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0); ++ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); ++ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); + + set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); + set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); + set_bit(BTN_TOOL_QUADTAP, dev1->keybit); + +- input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0); +- input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0); ++ input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); ++ input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); + } + + int alps_init(struct psmouse *psmouse) +diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h +index 0934f8b..5e638be 100644 +--- a/drivers/input/mouse/alps.h ++++ b/drivers/input/mouse/alps.h +@@ -72,6 +72,10 @@ struct alps_nibble_commands { + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). ++ * @x_max: Largest possible X position value. ++ * @y_max: Largest possible Y position value. ++ * @x_bits: Number of X bits in the MT bitmap. ++ * @y_bits: Number of Y bits in the MT bitmap. + * @hw_init: Protocol-specific hardware init function. + * @process_packet: Protocol-specific function to process a report packet. + * @set_abs_params: Protocol-specific function to configure the input_dev. +@@ -96,6 +100,10 @@ struct alps_data { + unsigned char proto_version; + unsigned char byte0, mask0; + unsigned char flags; ++ int x_max; ++ int y_max; ++ int x_bits; ++ int y_bits; + + int (*hw_init)(struct psmouse *psmouse); + void (*process_packet)(struct psmouse *psmouse); +-- +1.8.1.2 + + +From 3c9d054fef84ccc967445b330ab6012c6b6bd85b Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:26:11 -0800 +Subject: [PATCH 11/15] Input: ALPS - make the V3 packet field decoder + "pluggable" + +A number of different ALPS touchpad protocols can reuse +alps_process_touchpad_packet_v3() with small tweaks to the bitfield +decoding. Create a new priv->decode_fields() callback that handles the +per-model differences. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 101 +++++++++++++++++++++++++-------------------- + drivers/input/mouse/alps.h | 38 +++++++++++++++++ + 2 files changed, 95 insertions(+), 44 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index 2cd8be7..270b7de 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -447,17 +447,49 @@ static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) + return; + } + ++static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p) ++{ ++ f->left = !!(p[3] & 0x01); ++ f->right = !!(p[3] & 0x02); ++ f->middle = !!(p[3] & 0x04); ++ ++ f->ts_left = !!(p[3] & 0x10); ++ f->ts_right = !!(p[3] & 0x20); ++ f->ts_middle = !!(p[3] & 0x40); ++} ++ ++static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p) ++{ ++ f->first_mp = !!(p[4] & 0x40); ++ f->is_mp = !!(p[0] & 0x40); ++ ++ f->fingers = (p[5] & 0x3) + 1; ++ f->x_map = ((p[4] & 0x7e) << 8) | ++ ((p[1] & 0x7f) << 2) | ++ ((p[0] & 0x30) >> 4); ++ f->y_map = ((p[3] & 0x70) << 4) | ++ ((p[2] & 0x7f) << 1) | ++ (p[4] & 0x01); ++ ++ f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | ++ ((p[0] & 0x30) >> 4); ++ f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); ++ f->z = p[5] & 0x7f; ++ ++ alps_decode_buttons_v3(f, p); ++} ++ + static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; +- int x, y, z; +- int left, right, middle; + int x1 = 0, y1 = 0, x2 = 0, y2 = 0; + int fingers = 0, bmap_fingers; +- unsigned int x_bitmap, y_bitmap; ++ struct alps_fields f; ++ ++ priv->decode_fields(&f, packet); + + /* + * There's no single feature of touchpad position and bitmap packets +@@ -472,17 +504,10 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + * packet. Check for this, and when it happens process the + * position packet as usual. + */ +- if (packet[0] & 0x40) { +- fingers = (packet[5] & 0x3) + 1; +- x_bitmap = ((packet[4] & 0x7e) << 8) | +- ((packet[1] & 0x7f) << 2) | +- ((packet[0] & 0x30) >> 4); +- y_bitmap = ((packet[3] & 0x70) << 4) | +- ((packet[2] & 0x7f) << 1) | +- (packet[4] & 0x01); +- ++ if (f.is_mp) { ++ fingers = f.fingers; + bmap_fingers = alps_process_bitmap(priv, +- x_bitmap, y_bitmap, ++ f.x_map, f.y_map, + &x1, &y1, &x2, &y2); + + /* +@@ -493,7 +518,7 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + fingers = bmap_fingers; + + /* Now process position packet */ +- packet = priv->multi_data; ++ priv->decode_fields(&f, priv->multi_data); + } else { + priv->multi_packet = 0; + } +@@ -507,10 +532,10 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + * out misidentified bitmap packets, we reject anything with this + * bit set. + */ +- if (packet[0] & 0x40) ++ if (f.is_mp) + return; + +- if (!priv->multi_packet && (packet[4] & 0x40)) { ++ if (!priv->multi_packet && f.first_mp) { + priv->multi_packet = 1; + memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); + return; +@@ -518,22 +543,13 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + + priv->multi_packet = 0; + +- left = packet[3] & 0x01; +- right = packet[3] & 0x02; +- middle = packet[3] & 0x04; +- +- x = ((packet[1] & 0x7f) << 4) | ((packet[4] & 0x30) >> 2) | +- ((packet[0] & 0x30) >> 4); +- y = ((packet[2] & 0x7f) << 4) | (packet[4] & 0x0f); +- z = packet[5] & 0x7f; +- + /* + * Sometimes the hardware sends a single packet with z = 0 + * in the middle of a stream. Real releases generate packets + * with x, y, and z all zero, so these seem to be flukes. + * Ignore them. + */ +- if (x && y && !z) ++ if (f.x && f.y && !f.z) + return; + + /* +@@ -541,12 +557,12 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + * to rely on ST data. + */ + if (!fingers) { +- x1 = x; +- y1 = y; +- fingers = z > 0 ? 1 : 0; ++ x1 = f.x; ++ y1 = f.y; ++ fingers = f.z > 0 ? 1 : 0; + } + +- if (z >= 64) ++ if (f.z >= 64) + input_report_key(dev, BTN_TOUCH, 1); + else + input_report_key(dev, BTN_TOUCH, 0); +@@ -555,26 +571,22 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + + input_mt_report_finger_count(dev, fingers); + +- input_report_key(dev, BTN_LEFT, left); +- input_report_key(dev, BTN_RIGHT, right); +- input_report_key(dev, BTN_MIDDLE, middle); ++ input_report_key(dev, BTN_LEFT, f.left); ++ input_report_key(dev, BTN_RIGHT, f.right); ++ input_report_key(dev, BTN_MIDDLE, f.middle); + +- if (z > 0) { +- input_report_abs(dev, ABS_X, x); +- input_report_abs(dev, ABS_Y, y); ++ if (f.z > 0) { ++ input_report_abs(dev, ABS_X, f.x); ++ input_report_abs(dev, ABS_Y, f.y); + } +- input_report_abs(dev, ABS_PRESSURE, z); ++ input_report_abs(dev, ABS_PRESSURE, f.z); + + input_sync(dev); + + if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { +- left = packet[3] & 0x10; +- right = packet[3] & 0x20; +- middle = packet[3] & 0x40; +- +- input_report_key(dev2, BTN_LEFT, left); +- input_report_key(dev2, BTN_RIGHT, right); +- input_report_key(dev2, BTN_MIDDLE, middle); ++ input_report_key(dev2, BTN_LEFT, f.ts_left); ++ input_report_key(dev2, BTN_RIGHT, f.ts_right); ++ input_report_key(dev2, BTN_MIDDLE, f.ts_middle); + input_sync(dev2); + } + } +@@ -1428,6 +1440,7 @@ static void alps_set_defaults(struct alps_data *priv) + priv->hw_init = alps_hw_init_v3; + priv->process_packet = alps_process_packet_v3; + priv->set_abs_params = alps_set_abs_params_mt; ++ priv->decode_fields = alps_decode_pinnacle; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + break; +diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h +index 5e638be..9704805 100644 +--- a/drivers/input/mouse/alps.h ++++ b/drivers/input/mouse/alps.h +@@ -60,6 +60,42 @@ struct alps_nibble_commands { + }; + + /** ++ * struct alps_fields - decoded version of the report packet ++ * @x_map: Bitmap of active X positions for MT. ++ * @y_map: Bitmap of active Y positions for MT. ++ * @fingers: Number of fingers for MT. ++ * @x: X position for ST. ++ * @y: Y position for ST. ++ * @z: Z position for ST. ++ * @first_mp: Packet is the first of a multi-packet report. ++ * @is_mp: Packet is part of a multi-packet report. ++ * @left: Left touchpad button is active. ++ * @right: Right touchpad button is active. ++ * @middle: Middle touchpad button is active. ++ * @ts_left: Left trackstick button is active. ++ * @ts_right: Right trackstick button is active. ++ * @ts_middle: Middle trackstick button is active. ++ */ ++struct alps_fields { ++ unsigned int x_map; ++ unsigned int y_map; ++ unsigned int fingers; ++ unsigned int x; ++ unsigned int y; ++ unsigned int z; ++ unsigned int first_mp:1; ++ unsigned int is_mp:1; ++ ++ unsigned int left:1; ++ unsigned int right:1; ++ unsigned int middle:1; ++ ++ unsigned int ts_left:1; ++ unsigned int ts_right:1; ++ unsigned int ts_middle:1; ++}; ++ ++/** + * struct alps_data - private data structure for the ALPS driver + * @dev2: "Relative" device used to report trackstick or mouse activity. + * @phys: Physical path for the relative device. +@@ -78,6 +114,7 @@ struct alps_nibble_commands { + * @y_bits: Number of Y bits in the MT bitmap. + * @hw_init: Protocol-specific hardware init function. + * @process_packet: Protocol-specific function to process a report packet. ++ * @decode_fields: Protocol-specific function to read packet bitfields. + * @set_abs_params: Protocol-specific function to configure the input_dev. + * @prev_fin: Finger bit from previous packet. + * @multi_packet: Multi-packet data in progress. +@@ -107,6 +144,7 @@ struct alps_data { + + int (*hw_init)(struct psmouse *psmouse); + void (*process_packet)(struct psmouse *psmouse); ++ void (*decode_fields)(struct alps_fields *f, unsigned char *p); + void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); + + int prev_fin; +-- +1.8.1.2 + + +From 9e7c99b6c125653f53ef0999a176c3a79de21be8 Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:27:08 -0800 +Subject: [PATCH 12/15] Input: ALPS - add support for "Rushmore" touchpads + +Rushmore touchpads are found on Dell E6230/E6430/E6530. They use the V3 +protocol with slightly tweaked init sequences and report formats. + +The E7 report is 73 03 0a, and the EC report is 88 08 1d + +Credits: Emmanuel Thome reported the MT bitmap changes. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 52 insertions(+) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index 270b7de..bf2fa51 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -479,6 +479,14 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p) + alps_decode_buttons_v3(f, p); + } + ++static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p) ++{ ++ alps_decode_pinnacle(f, p); ++ ++ f->x_map |= (p[5] & 0x10) << 11; ++ f->y_map |= (p[5] & 0x20) << 6; ++} ++ + static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; +@@ -1329,6 +1337,40 @@ error: + return -1; + } + ++static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ int reg_val, ret = -1; ++ ++ if (alps_enter_command_mode(psmouse, NULL) || ++ alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || ++ alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) ++ goto error; ++ ++ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6); ++ if (reg_val == -1) ++ goto error; ++ if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd)) ++ goto error; ++ ++ if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) ++ goto error; ++ ++ /* enter absolute mode */ ++ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4); ++ if (reg_val == -1) ++ goto error; ++ if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02)) ++ goto error; ++ ++ alps_exit_command_mode(psmouse); ++ return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); ++ ++error: ++ alps_exit_command_mode(psmouse); ++ return ret; ++} ++ + /* Must be in command mode when calling this function */ + static int alps_absolute_mode_v4(struct psmouse *psmouse) + { +@@ -1511,6 +1553,16 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) + + if (alps_match_table(psmouse, priv, e7, ec) == 0) { + return 0; ++ } else if (ec[0] == 0x88 && ec[1] == 0x08) { ++ priv->proto_version = ALPS_PROTO_V3; ++ alps_set_defaults(priv); ++ ++ priv->hw_init = alps_hw_init_rushmore_v3; ++ priv->decode_fields = alps_decode_rushmore; ++ priv->x_bits = 16; ++ priv->y_bits = 12; ++ ++ return 0; + } else if (ec[0] == 0x88 && ec[1] == 0x07 && + ec[2] >= 0x90 && ec[2] <= 0x9d) { + priv->proto_version = ALPS_PROTO_V3; +-- +1.8.1.2 + + +From e5ca58dc506fb7f64760b483ecd407593b764f3b Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Wed, 13 Feb 2013 22:28:07 -0800 +Subject: [PATCH 13/15] Input: ALPS - enable trackstick on Rushmore touchpads + +Separate out the common trackstick probe/setup sequences, then call them +from each of the v3 init functions. + +Credits: Emmanual Thome furnished the information on the trackstick init +and how it affected the report format. + +Signed-off-by: Kevin Cernekee +Tested-by: Dave Turvene +Signed-off-by: Dmitry Torokhov +--- + drivers/input/mouse/alps.c | 185 ++++++++++++++++++++++++++++----------------- + 1 file changed, 115 insertions(+), 70 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index bf2fa51..7b99fc7 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -29,6 +29,9 @@ + */ + #define ALPS_CMD_NIBBLE_10 0x01f2 + ++#define ALPS_REG_BASE_RUSHMORE 0xc2c0 ++#define ALPS_REG_BASE_PINNACLE 0x0000 ++ + static const struct alps_nibble_commands alps_v3_nibble_commands[] = { + { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */ + { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ +@@ -1166,26 +1169,31 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse) + } + + /* +- * Enable or disable passthrough mode to the trackstick. Must be in +- * command mode when calling this function. ++ * Enable or disable passthrough mode to the trackstick. + */ +-static int alps_passthrough_mode_v3(struct psmouse *psmouse, bool enable) ++static int alps_passthrough_mode_v3(struct psmouse *psmouse, ++ int reg_base, bool enable) + { +- int reg_val; ++ int reg_val, ret = -1; + +- reg_val = alps_command_mode_read_reg(psmouse, 0x0008); +- if (reg_val == -1) ++ if (alps_enter_command_mode(psmouse, NULL)) + return -1; + ++ reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008); ++ if (reg_val == -1) ++ goto error; ++ + if (enable) + reg_val |= 0x01; + else + reg_val &= ~0x01; + +- if (__alps_command_mode_write_reg(psmouse, reg_val)) +- return -1; ++ ret = __alps_command_mode_write_reg(psmouse, reg_val); + +- return 0; ++error: ++ if (alps_exit_command_mode(psmouse)) ++ ret = -1; ++ return ret; + } + + /* Must be in command mode when calling this function */ +@@ -1204,69 +1212,102 @@ static int alps_absolute_mode_v3(struct psmouse *psmouse) + return 0; + } + +-static int alps_hw_init_v3(struct psmouse *psmouse) ++static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) + { +- struct ps2dev *ps2dev = &psmouse->ps2dev; +- int reg_val; +- unsigned char param[4]; ++ int ret = -EIO, reg_val; + + if (alps_enter_command_mode(psmouse, NULL)) + goto error; + +- /* Check for trackstick */ +- reg_val = alps_command_mode_read_reg(psmouse, 0x0008); ++ reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08); + if (reg_val == -1) + goto error; +- if (reg_val & 0x80) { +- if (alps_passthrough_mode_v3(psmouse, true)) +- goto error; +- if (alps_exit_command_mode(psmouse)) +- goto error; ++ ++ /* bit 7: trackstick is present */ ++ ret = reg_val & 0x80 ? 0 : -ENODEV; ++ ++error: ++ alps_exit_command_mode(psmouse); ++ return ret; ++} ++ ++static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ int ret = 0; ++ unsigned char param[4]; ++ ++ if (alps_passthrough_mode_v3(psmouse, reg_base, true)) ++ return -EIO; ++ ++ /* ++ * E7 report for the trackstick ++ * ++ * There have been reports of failures to seem to trace back ++ * to the above trackstick check failing. When these occur ++ * this E7 report fails, so when that happens we continue ++ * with the assumption that there isn't a trackstick after ++ * all. ++ */ ++ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) { ++ psmouse_warn(psmouse, "trackstick E7 report failed\n"); ++ ret = -ENODEV; ++ } else { ++ psmouse_dbg(psmouse, ++ "trackstick E7 report: %2.2x %2.2x %2.2x\n", ++ param[0], param[1], param[2]); + + /* +- * E7 report for the trackstick +- * +- * There have been reports of failures to seem to trace back +- * to the above trackstick check failing. When these occur +- * this E7 report fails, so when that happens we continue +- * with the assumption that there isn't a trackstick after +- * all. ++ * Not sure what this does, but it is absolutely ++ * essential. Without it, the touchpad does not ++ * work at all and the trackstick just emits normal ++ * PS/2 packets. + */ +- param[0] = 0x64; +- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || +- ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { +- psmouse_warn(psmouse, "trackstick E7 report failed\n"); +- } else { +- psmouse_dbg(psmouse, +- "trackstick E7 report: %2.2x %2.2x %2.2x\n", +- param[0], param[1], param[2]); +- +- /* +- * Not sure what this does, but it is absolutely +- * essential. Without it, the touchpad does not +- * work at all and the trackstick just emits normal +- * PS/2 packets. +- */ +- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || +- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || +- alps_command_mode_send_nibble(psmouse, 0x9) || +- alps_command_mode_send_nibble(psmouse, 0x4)) { +- psmouse_err(psmouse, +- "Error sending magic E6 sequence\n"); +- goto error_passthrough; +- } ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ++ alps_command_mode_send_nibble(psmouse, 0x9) || ++ alps_command_mode_send_nibble(psmouse, 0x4)) { ++ psmouse_err(psmouse, ++ "Error sending magic E6 sequence\n"); ++ ret = -EIO; ++ goto error; + } + +- if (alps_enter_command_mode(psmouse, NULL)) +- goto error_passthrough; +- if (alps_passthrough_mode_v3(psmouse, false)) +- goto error; ++ /* ++ * This ensures the trackstick packets are in the format ++ * supported by this driver. If bit 1 isn't set the packet ++ * format is different. ++ */ ++ if (alps_enter_command_mode(psmouse, NULL) || ++ alps_command_mode_write_reg(psmouse, ++ reg_base + 0x08, 0x82) || ++ alps_exit_command_mode(psmouse)) ++ ret = -EIO; + } + +- if (alps_absolute_mode_v3(psmouse)) { ++error: ++ if (alps_passthrough_mode_v3(psmouse, reg_base, false)) ++ ret = -EIO; ++ ++ return ret; ++} ++ ++static int alps_hw_init_v3(struct psmouse *psmouse) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ int reg_val; ++ unsigned char param[4]; ++ ++ reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE); ++ if (reg_val == -EIO) ++ goto error; ++ if (reg_val == 0 && ++ alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) ++ goto error; ++ ++ if (alps_enter_command_mode(psmouse, NULL) || ++ alps_absolute_mode_v3(psmouse)) { + psmouse_err(psmouse, "Failed to enter absolute mode\n"); + goto error; + } +@@ -1303,14 +1344,6 @@ static int alps_hw_init_v3(struct psmouse *psmouse) + if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04)) + goto error; + +- /* +- * This ensures the trackstick packets are in the format +- * supported by this driver. If bit 1 isn't set the packet +- * format is different. +- */ +- if (alps_command_mode_write_reg(psmouse, 0x0008, 0x82)) +- goto error; +- + alps_exit_command_mode(psmouse); + + /* Set rate and enable data reporting */ +@@ -1323,10 +1356,6 @@ static int alps_hw_init_v3(struct psmouse *psmouse) + + return 0; + +-error_passthrough: +- /* Something failed while in passthrough mode, so try to get out */ +- if (!alps_enter_command_mode(psmouse, NULL)) +- alps_passthrough_mode_v3(psmouse, false); + error: + /* + * Leaving the touchpad in command mode will essentially render +@@ -1339,9 +1368,19 @@ error: + + static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) + { ++ struct alps_data *priv = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val, ret = -1; + ++ if (priv->flags & ALPS_DUALPOINT) { ++ reg_val = alps_setup_trackstick_v3(psmouse, ++ ALPS_REG_BASE_RUSHMORE); ++ if (reg_val == -EIO) ++ goto error; ++ if (reg_val == -ENODEV) ++ priv->flags &= ~ALPS_DUALPOINT; ++ } ++ + if (alps_enter_command_mode(psmouse, NULL) || + alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || + alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) +@@ -1562,6 +1601,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) + priv->x_bits = 16; + priv->y_bits = 12; + ++ /* hack to make addr_command, nibble_command available */ ++ psmouse->private = priv; ++ ++ if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE)) ++ priv->flags &= ~ALPS_DUALPOINT; ++ + return 0; + } else if (ec[0] == 0x88 && ec[1] == 0x07 && + ec[2] >= 0x90 && ec[2] <= 0x9d) { +-- +1.8.1.2 + + +From db7192fa07fa5c70c9849d8f658a7ff696cff99d Mon Sep 17 00:00:00 2001 +From: Kevin Cernekee +Date: Sat, 16 Feb 2013 22:40:03 -0800 +Subject: [PATCH 14/15] Input: ALPS - Remove unused argument to + alps_enter_command_mode() + +Now that alps_identify() explicitly issues an EC report using +alps_rpt_cmd(), we no longer need to look at the magic numbers returned +by alps_enter_command_mode(). + +Signed-off-by: Kevin Cernekee +--- + drivers/input/mouse/alps.c | 18 +++++++----------- + 1 file changed, 7 insertions(+), 11 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index 7b99fc7..9c97531 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -994,8 +994,7 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, + return 0; + } + +-static int alps_enter_command_mode(struct psmouse *psmouse, +- unsigned char *resp) ++static int alps_enter_command_mode(struct psmouse *psmouse) + { + unsigned char param[4]; + +@@ -1009,9 +1008,6 @@ static int alps_enter_command_mode(struct psmouse *psmouse, + "unknown response while entering command mode\n"); + return -1; + } +- +- if (resp) +- *resp = param[2]; + return 0; + } + +@@ -1176,7 +1172,7 @@ static int alps_passthrough_mode_v3(struct psmouse *psmouse, + { + int reg_val, ret = -1; + +- if (alps_enter_command_mode(psmouse, NULL)) ++ if (alps_enter_command_mode(psmouse)) + return -1; + + reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008); +@@ -1216,7 +1212,7 @@ static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) + { + int ret = -EIO, reg_val; + +- if (alps_enter_command_mode(psmouse, NULL)) ++ if (alps_enter_command_mode(psmouse)) + goto error; + + reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08); +@@ -1279,7 +1275,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) + * supported by this driver. If bit 1 isn't set the packet + * format is different. + */ +- if (alps_enter_command_mode(psmouse, NULL) || ++ if (alps_enter_command_mode(psmouse) || + alps_command_mode_write_reg(psmouse, + reg_base + 0x08, 0x82) || + alps_exit_command_mode(psmouse)) +@@ -1306,7 +1302,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse) + alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) + goto error; + +- if (alps_enter_command_mode(psmouse, NULL) || ++ if (alps_enter_command_mode(psmouse) || + alps_absolute_mode_v3(psmouse)) { + psmouse_err(psmouse, "Failed to enter absolute mode\n"); + goto error; +@@ -1381,7 +1377,7 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) + priv->flags &= ~ALPS_DUALPOINT; + } + +- if (alps_enter_command_mode(psmouse, NULL) || ++ if (alps_enter_command_mode(psmouse) || + alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || + alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) + goto error; +@@ -1431,7 +1427,7 @@ static int alps_hw_init_v4(struct psmouse *psmouse) + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[4]; + +- if (alps_enter_command_mode(psmouse, NULL)) ++ if (alps_enter_command_mode(psmouse)) + goto error; + + if (alps_absolute_mode_v4(psmouse)) { +-- +1.8.1.2 + + +From 10740a25bb3b895b5de7773f926a978416b38409 Mon Sep 17 00:00:00 2001 +From: Dave Turvene +Date: Sat, 16 Feb 2013 22:40:04 -0800 +Subject: [PATCH 15/15] Input: ALPS - Add "Dolphin V1" touchpad support + +These touchpads use a different protocol; they have been seen on Dell +N5110, Dell 17R SE, and others. + +The official ALPS driver identifies them by looking for an exact match +on the E7 report: 73 03 50. Dolphin V1 returns an EC report of +73 01 xx (02 and 0d have been seen); Dolphin V2 returns an EC report of +73 02 xx (02 has been seen). + +Dolphin V2 probably needs a different initialization sequence and/or +report parser, so it is left for a future commit. + +Signed-off-by: Dave Turvene +Signed-off-by: Kevin Cernekee +--- + drivers/input/mouse/alps.c | 67 ++++++++++++++++++++++++++++++++++++++++++++-- + drivers/input/mouse/alps.h | 1 + + 2 files changed, 66 insertions(+), 2 deletions(-) + +diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c +index 9c97531..0238e0e 100644 +--- a/drivers/input/mouse/alps.c ++++ b/drivers/input/mouse/alps.c +@@ -490,6 +490,29 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p) + f->y_map |= (p[5] & 0x20) << 6; + } + ++static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p) ++{ ++ f->first_mp = !!(p[0] & 0x02); ++ f->is_mp = !!(p[0] & 0x20); ++ ++ f->fingers = ((p[0] & 0x6) >> 1 | ++ (p[0] & 0x10) >> 2); ++ f->x_map = ((p[2] & 0x60) >> 5) | ++ ((p[4] & 0x7f) << 2) | ++ ((p[5] & 0x7f) << 9) | ++ ((p[3] & 0x07) << 16) | ++ ((p[3] & 0x70) << 15) | ++ ((p[0] & 0x01) << 22); ++ f->y_map = (p[1] & 0x7f) | ++ ((p[2] & 0x1f) << 7); ++ ++ f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); ++ f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); ++ f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; ++ ++ alps_decode_buttons_v3(f, p); ++} ++ + static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) + { + struct alps_data *priv = psmouse->private; +@@ -874,7 +897,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) + } + + /* Bytes 2 - pktsize should have 0 in the highest bit */ +- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && ++ if (priv->proto_version != ALPS_PROTO_V5 && ++ psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && + (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { + psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", + psmouse->pktcnt - 1, +@@ -1003,7 +1027,8 @@ static int alps_enter_command_mode(struct psmouse *psmouse) + return -1; + } + +- if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) { ++ if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) && ++ param[0] != 0x73) { + psmouse_dbg(psmouse, + "unknown response while entering command mode\n"); + return -1; +@@ -1495,6 +1520,23 @@ error: + return -1; + } + ++static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ unsigned char param[2]; ++ ++ /* This is dolphin "v1" as empirically defined by florin9doi */ ++ param[0] = 0x64; ++ param[1] = 0x28; ++ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || ++ ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || ++ ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) ++ return -1; ++ ++ return 0; ++} ++ + static void alps_set_defaults(struct alps_data *priv) + { + priv->byte0 = 0x8f; +@@ -1528,6 +1570,21 @@ static void alps_set_defaults(struct alps_data *priv) + priv->nibble_commands = alps_v4_nibble_commands; + priv->addr_command = PSMOUSE_CMD_DISABLE; + break; ++ case ALPS_PROTO_V5: ++ priv->hw_init = alps_hw_init_dolphin_v1; ++ priv->process_packet = alps_process_packet_v3; ++ priv->decode_fields = alps_decode_dolphin; ++ priv->set_abs_params = alps_set_abs_params_mt; ++ priv->nibble_commands = alps_v3_nibble_commands; ++ priv->addr_command = PSMOUSE_CMD_RESET_WRAP; ++ priv->byte0 = 0xc8; ++ priv->mask0 = 0xc8; ++ priv->flags = 0; ++ priv->x_max = 1360; ++ priv->y_max = 660; ++ priv->x_bits = 23; ++ priv->y_bits = 12; ++ break; + } + } + +@@ -1588,6 +1645,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) + + if (alps_match_table(psmouse, priv, e7, ec) == 0) { + return 0; ++ } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && ++ ec[0] == 0x73 && ec[1] == 0x01) { ++ priv->proto_version = ALPS_PROTO_V5; ++ alps_set_defaults(priv); ++ ++ return 0; + } else if (ec[0] == 0x88 && ec[1] == 0x08) { + priv->proto_version = ALPS_PROTO_V3; + alps_set_defaults(priv); +diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h +index 9704805..eee5985 100644 +--- a/drivers/input/mouse/alps.h ++++ b/drivers/input/mouse/alps.h +@@ -16,6 +16,7 @@ + #define ALPS_PROTO_V2 2 + #define ALPS_PROTO_V3 3 + #define ALPS_PROTO_V4 4 ++#define ALPS_PROTO_V5 5 + + /** + * struct alps_model_info - touchpad ID table +-- +1.8.1.2 + diff --git a/kernel.spec b/kernel.spec index a9c235ed2..795e17e31 100644 --- a/kernel.spec +++ b/kernel.spec @@ -62,7 +62,7 @@ Summary: The Linux kernel # For non-released -rc kernels, this will be appended after the rcX and # gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" # -%global baserelease 1 +%global baserelease 2 %global fedora_build %{baserelease} # base_sublevel is the kernel version we're starting with and patching @@ -753,6 +753,9 @@ Patch22000: weird-root-dentry-name-debug.patch #selinux ptrace child permissions Patch22001: selinux-apply-different-permission-to-ptrace-child.patch +#rhbz 812111 +Patch21260: alps-v2.patch + # END OF PATCH DEFINITIONS %endif @@ -1455,6 +1458,9 @@ ApplyPatch pstore-Create-a-convenient-mount-point-for-pstore.patch #rhbz 909591 ApplyPatch usb-cypress-supertop.patch +#rhbz 812111 +ApplyPatch alps-v2.patch + # END OF PATCH APPLICATIONS %endif @@ -2311,6 +2317,7 @@ fi # || || %changelog * Tue Feb 19 2013 Josh Boyer +- Backport support for newer ALPS touchpads (rhbz 812111) - Enable CONFIG_AUDIT_LOGINUID_IMMUTABLE * Tue Feb 19 2013 Josh Boyer - 3.8.0-1