rpms/kernel
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

QCom ACPI fixes

Browse Source
This commit is contained in:
Peter Robinson 2019-06-22 10:56:20 +01:00
parent b0bc74c236
commit 5a11487f77
10 changed files with 1382 additions and 843 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
arm64-acpi-ignore-5.1-fadts-reported-as-5.0.patch Normal file
View File

@ -0,0 +1,41 @@
From a7edc17544709d20f800dc0898096365a3d68613 Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date: Sun, 2 Jun 2019 16:36:15 +0200
Subject: [PATCH] acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
Some Qualcomm Snapdragon based laptops built to run Microsoft Windows
are clearly ACPI 5.1 based, given that that is the first ACPI revision
that supports ARM, and introduced the FADT 'arm_boot_flags' field,
which has a non-zero field on those systems.
So in these cases, infer from the ARM boot flags that the FADT must be
5.1 or later, and treat it as 5.1.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/acpi.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 803f0494dd3e3..7722e85fb69c3 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -155,10 +155,14 @@ static int __init acpi_fadt_sanity_check(void)
*/
if (table->revision < 5 ||
(table->revision == 5 && fadt->minor_revision < 1)) {
- pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n",
+ pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",
table->revision, fadt->minor_revision);
- ret = -EINVAL;
- goto out;
+
+ if (!fadt->arm_boot_flags) {
+ ret = -EINVAL;
+ goto out;
+ }
+ pr_err("FADT has ARM boot flags set, assuming 5.1\n");
}
if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) {

30
arm64-acpi-make-ac-and-battery-drivers-available-on-non-x86.patch Normal file
View File

@ -0,0 +1,30 @@
From 7b87bc98ab598ae40ef1818fb0c420d61dd87ed1 Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date: Mon, 3 Jun 2019 08:37:11 +0200
Subject: [PATCH] acpi: make AC and battery drivers available on !X86
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/acpi/Kconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index e016f7a6ed136..3c8011e7b0d7c 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -155,7 +155,6 @@ config ACPI_EC_DEBUGFS
config ACPI_AC
tristate "AC Adapter"
- depends on X86
select POWER_SUPPLY
default y
help
@@ -168,7 +167,6 @@ config ACPI_AC
config ACPI_BATTERY
tristate "Battery"
- depends on X86
select POWER_SUPPLY
default y
help

1002
arm64-qcom-DWC3-USB-Add-support-for-ACPI-based-AArch64-Laptops.patch Normal file
View File

File diff suppressed because it is too large Load Diff

293
arm64-qcom-pinctrl-support-for-ACPI.patch Normal file
View File

@ -0,0 +1,293 @@
From 0ab5b9df0c9f07ae747ddc678d4e423c42f69624 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:06 +0100
Subject: [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI
Add a match table to allow automatic probing of ACPI device
QCOM0220. Ignore clock attainment errors. Set default clock
frequency value.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index db075bc0d952..9e3b8a98688d 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
@@ -483,6 +484,14 @@ static const struct i2c_algorithm geni_i2c_algo = {
.functionality = geni_i2c_func,
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id geni_i2c_acpi_match[] = {
+ { "QCOM0220"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match);
+#endif
+
static int geni_i2c_probe(struct platform_device *pdev)
{
struct geni_i2c_dev *gi2c;
@@ -502,7 +511,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
return PTR_ERR(gi2c->se.base);
gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
- if (IS_ERR(gi2c->se.clk)) {
+ if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
ret = PTR_ERR(gi2c->se.clk);
dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
return ret;
@@ -516,6 +525,9 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->clk_freq_out = KHZ(100);
}
+ if (has_acpi_companion(&pdev->dev))
+ ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
+
gi2c->irq = platform_get_irq(pdev, 0);
if (gi2c->irq < 0) {
dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
@@ -660,6 +672,7 @@ static struct platform_driver geni_i2c_driver = {
.name = "geni_i2c",
.pm = &geni_i2c_pm_ops,
.of_match_table = geni_i2c_dt_match,
+ .acpi_match_table = ACPI_PTR(geni_i2c_acpi_match),
},
};
--
2.21.0
From 5a0639fed6e05977d85c4824354e73d0a2fa92ef Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:07 +0100
Subject: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
The Qualcomm Geni I2C driver currently probes silently which can be
confusing when debugging potential issues. Add a low level (INFO)
print when each I2C controller is successfully initially set-up.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 9e3b8a98688d..a89bfce5388e 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -596,6 +596,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
return ret;
}
+ dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
+
return 0;
}
--
2.21.0
From 6f202eb6dbccf3172616a620faf934bf6195a0f9 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:08 +0100
Subject: [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a
reserved GPIO list
When booting MSM based platforms with Device Tree or some ACPI
implementations, it is possible to provide a list of reserved pins
via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
However some ACPI tables are not populated with this information,
thus it has to come from a knowledgable device driver instead.
Here we provide the MSM common driver with additional support to
parse this informtion and correctly populate the widely used
'valid_mask'.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 18 ++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-msm.h | 1 +
2 files changed, 19 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 6e319bcc2326..80682b017a47 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -599,8 +599,23 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip)
int ret;
unsigned int len, i;
unsigned int max_gpios = pctrl->soc->ngpios;
+ const int *reserved = pctrl->soc->reserved_gpios;
u16 *tmp;
+ /* Driver provided reserved list overrides DT and ACPI */
+ if (reserved) {
+ bitmap_fill(chip->valid_mask, max_gpios);
+ for (i = 0; reserved[i] >= 0; i++) {
+ if (i >= max_gpios || reserved[i] >= max_gpios) {
+ dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
+ return -EINVAL;
+ }
+ clear_bit(reserved[i], chip->valid_mask);
+ }
+
+ return 0;
+ }
+
/* The number of GPIOs in the ACPI tables */
len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL,
0);
@@ -956,6 +971,9 @@ static void msm_gpio_irq_handler(struct irq_desc *desc)
static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
{
+ if (pctrl->soc->reserved_gpios)
+ return true;
+
return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0;
}
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index b724581c605c..48569cda8471 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -113,6 +113,7 @@ struct msm_pinctrl_soc_data {
bool pull_no_keeper;
const char *const *tiles;
unsigned int ntiles;
+ const int *reserved_gpios;
};
extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
--
2.21.0
From 568ff4c9723d761164416fdf876232f5b14cf3ad Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:09 +0100
Subject: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
This patch provides basic support for booting with ACPI instead
of the currently supported Device Tree. When doing so there are a
couple of differences which we need to taken into consideration.
Firstly, the SDM850 ACPI tables omit information pertaining to the
4 reserved GPIOs on the platform. If Linux attempts to touch/
initialise any of these lines, the firmware will restart the
platform.
Secondly, when booting with ACPI, it is expected that the firmware
will set-up things like; Regulators, Clocks, Pin Functions, etc in
their ideal configuration. Thus, the possible Pin Functions
available to this platform are not advertised when providing the
higher GPIOD/Pinctrl APIs with pin information.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/pinctrl/qcom/Kconfig | 2 +-
drivers/pinctrl/qcom/pinctrl-sdm845.c | 36 ++++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 890d0a3a790b..27ab585a639c 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -169,7 +169,7 @@ config PINCTRL_SDM660
config PINCTRL_SDM845
tristate "Qualcomm Technologies Inc SDM845 pin controller driver"
- depends on GPIOLIB && OF
+ depends on GPIOLIB && (OF || ACPI)
select PINCTRL_MSM
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c
index c97f20fca5fd..98a438dba711 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
@@ -3,6 +3,7 @@
* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -1277,6 +1278,10 @@ static const struct msm_pingroup sdm845_groups[] = {
UFS_RESET(ufs_reset, 0x99f000),
};
+static const int sdm845_acpi_reserved_gpios[] = {
+ 0, 1, 2, 3, 81, 82, 83, 84, -1
+};
+
static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.pins = sdm845_pins,
.npins = ARRAY_SIZE(sdm845_pins),
@@ -1287,11 +1292,39 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.ngpios = 150,
};
+static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
+ .pins = sdm845_pins,
+ .npins = ARRAY_SIZE(sdm845_pins),
+ .groups = sdm845_groups,
+ .ngroups = ARRAY_SIZE(sdm845_groups),
+ .reserved_gpios = sdm845_acpi_reserved_gpios,
+ .ngpios = 150,
+};
+
static int sdm845_pinctrl_probe(struct platform_device *pdev)
{
- return msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+ int ret;
+
+ if (pdev->dev.of_node) {
+ ret = msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+ } else if (has_acpi_companion(&pdev->dev)) {
+ ret = msm_pinctrl_probe(pdev, &sdm845_acpi_pinctrl);
+ } else {
+ dev_err(&pdev->dev, "DT and ACPI disabled\n");
+ return -EINVAL;
+ }
+
+ return ret;
}
+#if CONFIG_ACPI
+static const struct acpi_device_id sdm845_pinctrl_acpi_match[] = {
+ { "QCOM0217"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, sdm845_pinctrl_acpi_match);
+#endif
+
static const struct of_device_id sdm845_pinctrl_of_match[] = {
{ .compatible = "qcom,sdm845-pinctrl", },
{ },
@@ -1302,6 +1335,7 @@ static struct platform_driver sdm845_pinctrl_driver = {
.name = "sdm845-pinctrl",
.pm = &msm_pinctrl_dev_pm_ops,
.of_match_table = sdm845_pinctrl_of_match,
+ .acpi_match_table = ACPI_PTR(sdm845_pinctrl_acpi_match),
},
.probe = sdm845_pinctrl_probe,
.remove = msm_pinctrl_remove,
--
2.21.0

1
configs/fedora/generic/arm/aarch64/CONFIG_ACPI_AC Normal file
View File

@ -0,0 +1 @@
CONFIG_ACPI_AC=y

1
configs/fedora/generic/arm/aarch64/CONFIG_ACPI_BATTERY Normal file
View File

@ -0,0 +1 @@
CONFIG_ACPI_BATTERY=y

2
kernel-aarch64-debug.config
View File

@ -36,6 +36,7 @@ CONFIG_ACCESSIBILITY=y
CONFIG_ACENIC=m CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ACORN_PARTITION is not set # CONFIG_ACORN_PARTITION is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_ALS=m CONFIG_ACPI_ALS=m
# CONFIG_ACPI_APEI_EINJ is not set # CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set # CONFIG_ACPI_APEI_ERST_DEBUG is not set
@ -44,6 +45,7 @@ CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_SEA=y CONFIG_ACPI_APEI_SEA=y
CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BGRT=y CONFIG_ACPI_BGRT=y
CONFIG_ACPI_BUTTON=y CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_CONFIGFS=m CONFIG_ACPI_CONFIGFS=m

2
kernel-aarch64.config
View File

@ -36,6 +36,7 @@ CONFIG_ACCESSIBILITY=y
CONFIG_ACENIC=m CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ACORN_PARTITION is not set # CONFIG_ACORN_PARTITION is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_ALS=m CONFIG_ACPI_ALS=m
# CONFIG_ACPI_APEI_EINJ is not set # CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set # CONFIG_ACPI_APEI_ERST_DEBUG is not set
@ -44,6 +45,7 @@ CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_SEA=y CONFIG_ACPI_APEI_SEA=y
CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BGRT=y CONFIG_ACPI_BGRT=y
CONFIG_ACPI_BUTTON=y CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_CONFIGFS=m CONFIG_ACPI_CONFIGFS=m

12
kernel.spec
View File

@ -553,6 +553,7 @@ Patch305: arm-sdhci-esdhc-imx-fixes.patch
Patch306: arm64-rock960-enable-tsadc.patch Patch306: arm64-rock960-enable-tsadc.patch
# Raspberry Pi bits
Patch330: ARM-cpufreq-support-for-Raspberry-Pi.patch Patch330: ARM-cpufreq-support-for-Raspberry-Pi.patch
Patch331: watchdog-bcm2835_wdt-Fix-module-autoload.patch Patch331: watchdog-bcm2835_wdt-Fix-module-autoload.patch
@ -560,8 +561,12 @@ Patch331: watchdog-bcm2835_wdt-Fix-module-autoload.patch
# Tegra bits # Tegra bits
Patch340: arm64-tegra-jetson-tx1-fixes.patch Patch340: arm64-tegra-jetson-tx1-fixes.patch
# qcom bits # QCom ACPI device support pieces
Patch350: qcom-Provide-support-for-ACPI.patch Patch350: arm64-qcom-pinctrl-support-for-ACPI.patch
Patch351: arm64-acpi-ignore-5.1-fadts-reported-as-5.0.patch
Patch352: arm64-acpi-make-ac-and-battery-drivers-available-on-non-x86.patch
Patch353: arm64-qcom-DWC3-USB-Add-support-for-ACPI-based-AArch64-Laptops.patch
# 400 - IBM (ppc/s390x) patches # 400 - IBM (ppc/s390x) patches
@ -1826,6 +1831,9 @@ fi
# #
# #
%changelog %changelog
* Sat Jun 22 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- QCom ACPI fixes
* Fri Jun 21 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc5.git4.1 * Fri Jun 21 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc5.git4.1
- Linux v5.2-rc5-290-g4ae004a9bca8 - Linux v5.2-rc5-290-g4ae004a9bca8

841
qcom-Provide-support-for-ACPI.patch
View File

@ -1,841 +0,0 @@
From 0ab5b9df0c9f07ae747ddc678d4e423c42f69624 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:06 +0100
Subject: [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI
Add a match table to allow automatic probing of ACPI device
QCOM0220. Ignore clock attainment errors. Set default clock
frequency value.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index db075bc0d952..9e3b8a98688d 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
@@ -483,6 +484,14 @@ static const struct i2c_algorithm geni_i2c_algo = {
.functionality = geni_i2c_func,
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id geni_i2c_acpi_match[] = {
+ { "QCOM0220"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match);
+#endif
+
static int geni_i2c_probe(struct platform_device *pdev)
{
struct geni_i2c_dev *gi2c;
@@ -502,7 +511,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
return PTR_ERR(gi2c->se.base);
gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
- if (IS_ERR(gi2c->se.clk)) {
+ if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
ret = PTR_ERR(gi2c->se.clk);
dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
return ret;
@@ -516,6 +525,9 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->clk_freq_out = KHZ(100);
}
+ if (has_acpi_companion(&pdev->dev))
+ ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
+
gi2c->irq = platform_get_irq(pdev, 0);
if (gi2c->irq < 0) {
dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
@@ -660,6 +672,7 @@ static struct platform_driver geni_i2c_driver = {
.name = "geni_i2c",
.pm = &geni_i2c_pm_ops,
.of_match_table = geni_i2c_dt_match,
+ .acpi_match_table = ACPI_PTR(geni_i2c_acpi_match),
},
};
--
2.21.0
From 5a0639fed6e05977d85c4824354e73d0a2fa92ef Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:07 +0100
Subject: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
The Qualcomm Geni I2C driver currently probes silently which can be
confusing when debugging potential issues. Add a low level (INFO)
print when each I2C controller is successfully initially set-up.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 9e3b8a98688d..a89bfce5388e 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -596,6 +596,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
return ret;
}
+ dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
+
return 0;
}
--
2.21.0
From 6f202eb6dbccf3172616a620faf934bf6195a0f9 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:08 +0100
Subject: [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a
reserved GPIO list
When booting MSM based platforms with Device Tree or some ACPI
implementations, it is possible to provide a list of reserved pins
via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
However some ACPI tables are not populated with this information,
thus it has to come from a knowledgable device driver instead.
Here we provide the MSM common driver with additional support to
parse this informtion and correctly populate the widely used
'valid_mask'.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 18 ++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-msm.h | 1 +
2 files changed, 19 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 6e319bcc2326..80682b017a47 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -599,8 +599,23 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip)
int ret;
unsigned int len, i;
unsigned int max_gpios = pctrl->soc->ngpios;
+ const int *reserved = pctrl->soc->reserved_gpios;
u16 *tmp;
+ /* Driver provided reserved list overrides DT and ACPI */
+ if (reserved) {
+ bitmap_fill(chip->valid_mask, max_gpios);
+ for (i = 0; reserved[i] >= 0; i++) {
+ if (i >= max_gpios || reserved[i] >= max_gpios) {
+ dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
+ return -EINVAL;
+ }
+ clear_bit(reserved[i], chip->valid_mask);
+ }
+
+ return 0;
+ }
+
/* The number of GPIOs in the ACPI tables */
len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL,
0);
@@ -956,6 +971,9 @@ static void msm_gpio_irq_handler(struct irq_desc *desc)
static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
{
+ if (pctrl->soc->reserved_gpios)
+ return true;
+
return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0;
}
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index b724581c605c..48569cda8471 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -113,6 +113,7 @@ struct msm_pinctrl_soc_data {
bool pull_no_keeper;
const char *const *tiles;
unsigned int ntiles;
+ const int *reserved_gpios;
};
extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
--
2.21.0
From 568ff4c9723d761164416fdf876232f5b14cf3ad Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:09 +0100
Subject: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
This patch provides basic support for booting with ACPI instead
of the currently supported Device Tree. When doing so there are a
couple of differences which we need to taken into consideration.
Firstly, the SDM850 ACPI tables omit information pertaining to the
4 reserved GPIOs on the platform. If Linux attempts to touch/
initialise any of these lines, the firmware will restart the
platform.
Secondly, when booting with ACPI, it is expected that the firmware
will set-up things like; Regulators, Clocks, Pin Functions, etc in
their ideal configuration. Thus, the possible Pin Functions
available to this platform are not advertised when providing the
higher GPIOD/Pinctrl APIs with pin information.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/pinctrl/qcom/Kconfig | 2 +-
drivers/pinctrl/qcom/pinctrl-sdm845.c | 36 ++++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 890d0a3a790b..27ab585a639c 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -169,7 +169,7 @@ config PINCTRL_SDM660
config PINCTRL_SDM845
tristate "Qualcomm Technologies Inc SDM845 pin controller driver"
- depends on GPIOLIB && OF
+ depends on GPIOLIB && (OF || ACPI)
select PINCTRL_MSM
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c
index c97f20fca5fd..98a438dba711 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
@@ -3,6 +3,7 @@
* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -1277,6 +1278,10 @@ static const struct msm_pingroup sdm845_groups[] = {
UFS_RESET(ufs_reset, 0x99f000),
};
+static const int sdm845_acpi_reserved_gpios[] = {
+ 0, 1, 2, 3, 81, 82, 83, 84, -1
+};
+
static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.pins = sdm845_pins,
.npins = ARRAY_SIZE(sdm845_pins),
@@ -1287,11 +1292,39 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.ngpios = 150,
};
+static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
+ .pins = sdm845_pins,
+ .npins = ARRAY_SIZE(sdm845_pins),
+ .groups = sdm845_groups,
+ .ngroups = ARRAY_SIZE(sdm845_groups),
+ .reserved_gpios = sdm845_acpi_reserved_gpios,
+ .ngpios = 150,
+};
+
static int sdm845_pinctrl_probe(struct platform_device *pdev)
{
- return msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+ int ret;
+
+ if (pdev->dev.of_node) {
+ ret = msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+ } else if (has_acpi_companion(&pdev->dev)) {
+ ret = msm_pinctrl_probe(pdev, &sdm845_acpi_pinctrl);
+ } else {
+ dev_err(&pdev->dev, "DT and ACPI disabled\n");
+ return -EINVAL;
+ }
+
+ return ret;
}
+#if CONFIG_ACPI
+static const struct acpi_device_id sdm845_pinctrl_acpi_match[] = {
+ { "QCOM0217"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, sdm845_pinctrl_acpi_match);
+#endif
+
static const struct of_device_id sdm845_pinctrl_of_match[] = {
{ .compatible = "qcom,sdm845-pinctrl", },
{ },
@@ -1302,6 +1335,7 @@ static struct platform_driver sdm845_pinctrl_driver = {
.name = "sdm845-pinctrl",
.pm = &msm_pinctrl_dev_pm_ops,
.of_match_table = sdm845_pinctrl_of_match,
+ .acpi_match_table = ACPI_PTR(sdm845_pinctrl_acpi_match),
},
.probe = sdm845_pinctrl_probe,
.remove = msm_pinctrl_remove,
--
2.21.0
From 1960f541ea437ed1c704db11b9ca24a5248b31de Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:10 +0100
Subject: [PATCH 5/8] soc: qcom: geni: Add support for ACPI
When booting with ACPI as the active set of configuration tables,
all; clocks, regulators, pin functions ect are expected to be at
their ideal values/levels/rates, thus the associated frameworks
are unavailable. Ensure calls to these APIs are shielded when
ACPI is enabled.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/soc/qcom/qcom-geni-se.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 6b8ef01472e9..d5cf953b4337 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
@@ -450,6 +451,9 @@ int geni_se_resources_off(struct geni_se *se)
{
int ret;
+ if (has_acpi_companion(se->dev))
+ return 0;
+
ret = pinctrl_pm_select_sleep_state(se->dev);
if (ret)
return ret;
@@ -487,6 +491,9 @@ int geni_se_resources_on(struct geni_se *se)
{
int ret;
+ if (has_acpi_companion(se->dev))
+ return 0;
+
ret = geni_se_clks_on(se);
if (ret)
return ret;
@@ -724,12 +731,14 @@ static int geni_se_probe(struct platform_device *pdev)
if (IS_ERR(wrapper->base))
return PTR_ERR(wrapper->base);
- wrapper->ahb_clks[0].id = "m-ahb";
- wrapper->ahb_clks[1].id = "s-ahb";
- ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks);
- if (ret) {
- dev_err(dev, "Err getting AHB clks %d\n", ret);
- return ret;
+ if (!has_acpi_companion(&pdev->dev)) {
+ wrapper->ahb_clks[0].id = "m-ahb";
+ wrapper->ahb_clks[1].id = "s-ahb";
+ ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks);
+ if (ret) {
+ dev_err(dev, "Err getting AHB clks %d\n", ret);
+ return ret;
+ }
}
dev_set_drvdata(dev, wrapper);
--
2.21.0
From 0b10a369e159e4b76d1a786f613a2f061cdc3246 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Mon, 10 Jun 2019 10:31:02 +0100
Subject: [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI
In Linux, the DWC3 core exists as its own independent platform device.
Thus when describing relationships in Device Tree, the current default
boot configuration table option, the DWC3 core often resides as a child
of the platform specific node. Both of which are given their own
address space descriptions and the drivers can be mostly agnostic to
each other.
However, other Operating Systems have taken a more monolithic approach,
which is evident in the configuration ACPI tables for the Qualcomm
Snapdragon SDM850, where all DWC3 (core and platform) components are
described under a single IO memory region.
To ensure successful booting using the supplied ACPI tables, we need to
devise a way to chop up the address regions provided and subsequently
register the DWC3 core with the resultant information, which is
precisely what this patch aims to achieve.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
drivers/usb/dwc3/Kconfig | 2 +-
drivers/usb/dwc3/dwc3-qcom.c | 206 ++++++++++++++++++++++++++++++-----
2 files changed, 179 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 4a62045cc812..89abc6078703 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -128,7 +128,7 @@ config USB_DWC3_QCOM
tristate "Qualcomm Platform"
depends on ARCH_QCOM || COMPILE_TEST
depends on EXTCON || !EXTCON
- depends on OF
+ depends on (OF || ACPI)
default USB_DWC3
help
Some Qualcomm SoCs use DesignWare Core IP for USB2/3
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 184df4daa590..1e1f12b7991d 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -4,6 +4,7 @@
* Inspired by dwc3-of-simple.c
*/
+#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/clk.h>
@@ -38,6 +39,20 @@
#define PWR_EVNT_LPM_IN_L2_MASK BIT(4)
#define PWR_EVNT_LPM_OUT_L2_MASK BIT(5)
+#define SDM845_QSCRATCH_BASE_OFFSET 0xf8800
+#define SDM845_QSCRATCH_SIZE 0x400
+#define SDM845_DWC3_CORE_SIZE 0xcd00
+
+struct dwc3_acpi_pdata {
+ u32 qscratch_base_offset;
+ u32 qscratch_base_size;
+ u32 dwc3_core_base_size;
+ int hs_phy_irq_index;
+ int dp_hs_phy_irq_index;
+ int dm_hs_phy_irq_index;
+ int ss_phy_irq_index;
+};
+
struct dwc3_qcom {
struct device *dev;
void __iomem *qscratch_base;
@@ -56,6 +71,8 @@ struct dwc3_qcom {
struct notifier_block vbus_nb;
struct notifier_block host_nb;
+ const struct dwc3_acpi_pdata *acpi_pdata;
+
enum usb_dr_mode mode;
bool is_suspended;
bool pm_suspended;
@@ -300,12 +317,27 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
PIPE_UTMI_CLK_DIS);
}
+static int dwc3_qcom_get_irq(struct platform_device *pdev,
+ const char *name, int num)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (np)
+ ret = platform_get_irq_byname(pdev, name);
+ else
+ ret = platform_get_irq(pdev, num);
+
+ return ret;
+}
+
static int dwc3_qcom_setup_irq(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
int irq, ret;
-
- irq = platform_get_irq_byname(pdev, "hs_phy_irq");
+ irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
+ pdata ? pdata->hs_phy_irq_index : -1);
if (irq > 0) {
/* Keep wakeup interrupts disabled until suspend */
irq_set_status_flags(irq, IRQ_NOAUTOEN);
@@ -320,7 +352,8 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
qcom->hs_phy_irq = irq;
}
- irq = platform_get_irq_byname(pdev, "dp_hs_phy_irq");
+ irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
+ pdata ? pdata->dp_hs_phy_irq_index : -1);
if (irq > 0) {
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
@@ -334,7 +367,8 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
qcom->dp_hs_phy_irq = irq;
}
- irq = platform_get_irq_byname(pdev, "dm_hs_phy_irq");
+ irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
+ pdata ? pdata->dm_hs_phy_irq_index : -1);
if (irq > 0) {
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
@@ -348,7 +382,8 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
qcom->dm_hs_phy_irq = irq;
}
- irq = platform_get_irq_byname(pdev, "ss_phy_irq");
+ irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
+ pdata ? pdata->ss_phy_irq_index : -1);
if (irq > 0) {
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
@@ -371,11 +406,11 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
struct device_node *np = dev->of_node;
int i;
- qcom->num_clocks = count;
-
- if (!count)
+ if (!np || !count)
return 0;
+ qcom->num_clocks = count;
+
qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
sizeof(struct clk *), GFP_KERNEL);
if (!qcom->clks)
@@ -409,12 +444,103 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
return 0;
}
-static int dwc3_qcom_probe(struct platform_device *pdev)
+static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
{
+ struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ struct resource *res, *child_res = NULL;
+ int irq;
+ int ret;
+
+ qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
+ if (!qcom->dwc3)
+ return -ENOMEM;
+
+ qcom->dwc3->dev.parent = dev;
+ qcom->dwc3->dev.type = dev->type;
+ qcom->dwc3->dev.dma_mask = dev->dma_mask;
+ qcom->dwc3->dev.dma_parms = dev->dma_parms;
+ qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
+
+ child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
+ if (!child_res)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get memory resource\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ child_res[0].flags = res->flags;
+ child_res[0].start = res->start;
+ child_res[0].end = child_res[0].start +
+ qcom->acpi_pdata->dwc3_core_base_size;
+
+ irq = platform_get_irq(pdev, 0);
+ child_res[1].flags = IORESOURCE_IRQ;
+ child_res[1].start = child_res[1].end = irq;
+
+ ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto out;
+ }
+
+ ret = platform_device_add(qcom->dwc3);
+ if (ret)
+ dev_err(&pdev->dev, "failed to add device\n");
+
+out:
+ kfree(child_res);
+ return ret;
+}
+
+static int dwc3_qcom_of_register_core(struct platform_device *pdev)
+{
+ struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node, *dwc3_np;
struct device *dev = &pdev->dev;
+ int ret;
+
+ dwc3_np = of_get_child_by_name(np, "dwc3");
+ if (!dwc3_np) {
+ dev_err(dev, "failed to find dwc3 core child\n");
+ return -ENODEV;
+ }
+
+ ret = of_platform_populate(np, NULL, NULL, dev);
+ if (ret) {
+ dev_err(dev, "failed to register dwc3 core - %d\n", ret);
+ return ret;
+ }
+
+ qcom->dwc3 = of_find_device_by_node(dwc3_np);
+ if (!qcom->dwc3) {
+ dev_err(dev, "failed to get dwc3 platform device\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
+ .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
+ .qscratch_base_size = SDM845_QSCRATCH_SIZE,
+ .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
+ .hs_phy_irq_index = 1,
+ .dp_hs_phy_irq_index = 4,
+ .dm_hs_phy_irq_index = 3,
+ .ss_phy_irq_index = 2
+};
+
+static int dwc3_qcom_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
struct dwc3_qcom *qcom;
- struct resource *res;
+ struct resource *res, *parent_res = NULL;
int ret, i;
bool ignore_pipe_clk;
@@ -425,6 +551,14 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qcom);
qcom->dev = &pdev->dev;
+ if (ACPI_HANDLE(dev)) {
+ qcom->acpi_pdata = acpi_device_get_match_data(dev);
+ if (!qcom->acpi_pdata) {
+ dev_err(&pdev->dev, "no supporting ACPI device data\n");
+ return -EINVAL;
+ }
+ }
+
qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
if (IS_ERR(qcom->resets)) {
ret = PTR_ERR(qcom->resets);
@@ -454,7 +588,21 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- qcom->qscratch_base = devm_ioremap_resource(dev, res);
+
+ if (np) {
+ parent_res = res;
+ } else {
+ parent_res = kmemdup(res, sizeof(struct resource), GFP_KERNEL);
+ if (!parent_res)
+ return -ENOMEM;
+
+ parent_res->start = res->start +
+ qcom->acpi_pdata->qscratch_base_offset;
+ parent_res->end = parent_res->start +
+ qcom->acpi_pdata->qscratch_base_size;
+ }
+
+ qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
if (IS_ERR(qcom->qscratch_base)) {
dev_err(dev, "failed to map qscratch, err=%d\n", ret);
ret = PTR_ERR(qcom->qscratch_base);
@@ -462,13 +610,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
}
ret = dwc3_qcom_setup_irq(pdev);
- if (ret)
- goto clk_disable;
-
- dwc3_np = of_get_child_by_name(np, "dwc3");
- if (!dwc3_np) {
- dev_err(dev, "failed to find dwc3 core child\n");
- ret = -ENODEV;
+ if (ret) {
+ dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
goto clk_disable;
}
@@ -481,16 +624,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (ignore_pipe_clk)
dwc3_qcom_select_utmi_clk(qcom);
- ret = of_platform_populate(np, NULL, NULL, dev);
- if (ret) {
- dev_err(dev, "failed to register dwc3 core - %d\n", ret);
- goto clk_disable;
- }
+ if (np)
+ ret = dwc3_qcom_of_register_core(pdev);
+ else
+ ret = dwc3_qcom_acpi_register_core(pdev);
- qcom->dwc3 = of_find_device_by_node(dwc3_np);
- if (!qcom->dwc3) {
- dev_err(&pdev->dev, "failed to get dwc3 platform device\n");
- ret = -ENODEV;
+ if (ret) {
+ dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
goto depopulate;
}
@@ -514,7 +654,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
return 0;
depopulate:
- of_platform_depopulate(&pdev->dev);
+ if (np)
+ of_platform_depopulate(&pdev->dev);
+ else
+ platform_device_put(pdev);
clk_disable:
for (i = qcom->num_clocks - 1; i >= 0; i--) {
clk_disable_unprepare(qcom->clks[i]);
@@ -601,6 +744,12 @@ static const struct of_device_id dwc3_qcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
+static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
+ { "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
+
static struct platform_driver dwc3_qcom_driver = {
.probe = dwc3_qcom_probe,
.remove = dwc3_qcom_remove,
@@ -608,6 +757,7 @@ static struct platform_driver dwc3_qcom_driver = {
.name = "dwc3-qcom",
.pm = &dwc3_qcom_dev_pm_ops,
.of_match_table = dwc3_qcom_of_match,
+ .acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
},
};
--
2.21.0
From 2511cdbc0cdd6dea8226fbb984418f06bc1983a9 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:12 +0100
Subject: [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
When booting with Device Tree, the current default boot configuration
table option, the request to boot via 'host mode' comes from the
'dr_mode' property. A property of the same name can be used inside
ACPI tables too. However it is missing from the SDM845's ACPI tables
so we have to supply this information using Platform Device Properties
instead.
This does not change the behaviour of any currently supported devices.
The property is only set on ACPI enabled platforms, thus for H/W
booting DT, unless a 'dr_mode' property is present, the default is
still OTG (On-The-Go) as per [0]. Any new ACPI devices added will
also be able to over-ride this implementation by providing a 'dr_mode'
property in their ACPI tables. In cases where 'dr_mode' is omitted
from the tables AND 'host mode' should not be the default (very
unlikely), then we will have to add some way of choosing between them
at run time - most likely by ACPI HID.
[0] Documentation/devicetree/bindings/usb/generic.txt
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 1e1f12b7991d..55ba04254e38 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -444,6 +444,11 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
return 0;
}
+static const struct property_entry dwc3_qcom_acpi_properties[] = {
+ PROPERTY_ENTRY_STRING("dr_mode", "host"),
+ {}
+};
+
static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
@@ -488,6 +493,13 @@ static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
goto out;
}
+ ret = platform_device_add_properties(qcom->dwc3,
+ dwc3_qcom_acpi_properties);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add properties\n");
+ goto out;
+ }
+
ret = platform_device_add(qcom->dwc3);
if (ret)
dev_err(&pdev->dev, "failed to add device\n");
--
2.21.0
From 63a5217702e09f913bcc2d1c98285e7f3d9d1f31 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:13 +0100
Subject: [PATCH 8/8] usb: dwc3: qcom: Improve error handling
dwc3_qcom_clk_init() is called with of_count_phandle_with_args() as an
argument. If of_count_phandle_with_args() returns an error, the number
of clocks will be a negative value and will lead to undefined behaviour.
Ensure we check for an error before attempting to blindly use the value.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 55ba04254e38..e4dac82abd7d 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -409,6 +409,9 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
if (!np || !count)
return 0;
+ if (count < 0)
+ return count;
+
qcom->num_clocks = count;
qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
--
2.21.0