rpms/kernel
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Linux v3.12.5 rebase

Browse Source
This commit is contained in:
Justin M. Forbes 2013-12-13 11:39:13 -06:00
parent ace8ec2197
commit 4c74055fdc
70 changed files with 4652 additions and 8338 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
0001-ip6_output-fragment-outgoing-reassembled-skb-properl.patch
View File

@ -1,39 +0,0 @@
Bugzilla: 1015905
Upstream-status: 3.13 (should hit stable)
From 90e4e23d52fd04f228eed2c3d341136c50058b37 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jiri@resnulli.us>
Date: Wed, 6 Nov 2013 17:52:19 +0100
Subject: [PATCH 1/2] ip6_output: fragment outgoing reassembled skb properly
If reassembled packet would fit into outdev MTU, it is not fragmented
according the original frag size and it is send as single big packet.
The second case is if skb is gso. In that case fragmentation does not happen
according to the original frag size.
This patch fixes these.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
net/ipv6/ip6_output.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 5b25f85..f80f2fa 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -150,7 +150,8 @@ static int ip6_finish_output2(struct sk_buff *skb)
static int ip6_finish_output(struct sk_buff *skb)
{
if ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
- dst_allfrag(skb_dst(skb)))
+ dst_allfrag(skb_dst(skb)) ||
+ (IP6CB(skb)->frag_max_size && skb->len > IP6CB(skb)->frag_max_size))
return ip6_fragment(skb, ip6_finish_output2);
else
return ip6_finish_output2(skb);
--
1.8.3.1

35
0001-iwlwifi-don-t-WARN-on-host-commands-sent-when-firmwa.patch
View File

@ -1,35 +0,0 @@
From 8ca95995e64f5d270889badb3e449dca91106a2b Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 15 Sep 2013 11:37:17 +0300
Subject: [PATCH] iwlwifi: don't WARN on host commands sent when firmware is dead
This triggers automatic bug reports and add no valuable
information. Print a simple error instead and drop the
host command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-trans.h | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index dd57a36..80b4750 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -601,8 +601,10 @@ static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
{
int ret;
- WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
- "%s bad state = %d", __func__, trans->state);
+ if (trans->state != IWL_TRANS_FW_ALIVE) {
+ IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
+ return -EIO;
+ }
if (!(cmd->flags & CMD_ASYNC))
lock_map_acquire_read(&trans->sync_cmd_lockdep_map);
--
1.7.1

499
0002-netfilter-push-reasm-skb-through-instead-of-original.patch
View File

@ -1,499 +0,0 @@
Bugzilla: 1015905
Upstream-status: 3.13 (should hit stable)
From 5c0df04613dd39fba5d2a43eaf90a2dc1dcd8899 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jiri@resnulli.us>
Date: Wed, 6 Nov 2013 17:52:20 +0100
Subject: [PATCH 2/2] netfilter: push reasm skb through instead of original
frag skbs
Pushing original fragments through causes several problems. For example
for matching, frags may not be matched correctly. Take following
example:
<example>
On HOSTA do:
ip6tables -I INPUT -p icmpv6 -j DROP
ip6tables -I INPUT -p icmpv6 -m icmp6 --icmpv6-type 128 -j ACCEPT
and on HOSTB you do:
ping6 HOSTA -s2000 (MTU is 1500)
Incoming echo requests will be filtered out on HOSTA. This issue does
not occur with smaller packets than MTU (where fragmentation does not happen)
</example>
As was discussed previously, the only correct solution seems to be to use
reassembled skb instead of separete frags. Doing this has positive side
effects in reducing sk_buff by one pointer (nfct_reasm) and also the reams
dances in ipvs and conntrack can be removed.
Future plan is to remove net/ipv6/netfilter/nf_conntrack_reasm.c
entirely and use code in net/ipv6/reassembly.c instead.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
include/net/netfilter/ipv6/nf_defrag_ipv6.h
net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
net/netfilter/ipvs/ip_vs_core.c
---
include/linux/skbuff.h | 32 ---------------
include/net/ip_vs.h | 32 +--------------
include/net/netfilter/ipv6/nf_defrag_ipv6.h | 5 +--
net/core/skbuff.c | 3 --
net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c | 54 +------------------------
net/ipv6/netfilter/nf_conntrack_reasm.c | 19 +--------
net/ipv6/netfilter/nf_defrag_ipv6_hooks.c | 7 +++-
net/netfilter/ipvs/ip_vs_core.c | 55 +-------------------------
net/netfilter/ipvs/ip_vs_pe_sip.c | 8 +---
9 files changed, 13 insertions(+), 202 deletions(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 6bd165b..37b4517 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -333,11 +333,6 @@ typedef unsigned int sk_buff_data_t;
typedef unsigned char *sk_buff_data_t;
#endif
-#if defined(CONFIG_NF_DEFRAG_IPV4) || defined(CONFIG_NF_DEFRAG_IPV4_MODULE) || \
- defined(CONFIG_NF_DEFRAG_IPV6) || defined(CONFIG_NF_DEFRAG_IPV6_MODULE)
-#define NET_SKBUFF_NF_DEFRAG_NEEDED 1
-#endif
-
/**
* struct sk_buff - socket buffer
* @next: Next buffer in list
@@ -370,7 +365,6 @@ typedef unsigned char *sk_buff_data_t;
* @protocol: Packet protocol from driver
* @destructor: Destruct function
* @nfct: Associated connection, if any
- * @nfct_reasm: netfilter conntrack re-assembly pointer
* @nf_bridge: Saved data about a bridged frame - see br_netfilter.c
* @skb_iif: ifindex of device we arrived on
* @tc_index: Traffic control index
@@ -459,9 +453,6 @@ struct sk_buff {
#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
struct nf_conntrack *nfct;
#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
- struct sk_buff *nfct_reasm;
-#endif
#ifdef CONFIG_BRIDGE_NETFILTER
struct nf_bridge_info *nf_bridge;
#endif
@@ -2603,18 +2594,6 @@ static inline void nf_conntrack_get(struct nf_conntrack *nfct)
atomic_inc(&nfct->use);
}
#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
-static inline void nf_conntrack_get_reasm(struct sk_buff *skb)
-{
- if (skb)
- atomic_inc(&skb->users);
-}
-static inline void nf_conntrack_put_reasm(struct sk_buff *skb)
-{
- if (skb)
- kfree_skb(skb);
-}
-#endif
#ifdef CONFIG_BRIDGE_NETFILTER
static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge)
{
@@ -2633,10 +2612,6 @@ static inline void nf_reset(struct sk_buff *skb)
nf_conntrack_put(skb->nfct);
skb->nfct = NULL;
#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
- nf_conntrack_put_reasm(skb->nfct_reasm);
- skb->nfct_reasm = NULL;
-#endif
#ifdef CONFIG_BRIDGE_NETFILTER
nf_bridge_put(skb->nf_bridge);
skb->nf_bridge = NULL;
@@ -2658,10 +2633,6 @@ static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
nf_conntrack_get(src->nfct);
dst->nfctinfo = src->nfctinfo;
#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
- dst->nfct_reasm = src->nfct_reasm;
- nf_conntrack_get_reasm(src->nfct_reasm);
-#endif
#ifdef CONFIG_BRIDGE_NETFILTER
dst->nf_bridge = src->nf_bridge;
nf_bridge_get(src->nf_bridge);
@@ -2673,9 +2644,6 @@ static inline void nf_copy(struct sk_buff *dst, const struct sk_buff *src)
#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
nf_conntrack_put(dst->nfct);
#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
- nf_conntrack_put_reasm(dst->nfct_reasm);
-#endif
#ifdef CONFIG_BRIDGE_NETFILTER
nf_bridge_put(dst->nf_bridge);
#endif
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index f0d70f0..ff21521 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -109,7 +109,6 @@ extern int ip_vs_conn_tab_size;
struct ip_vs_iphdr {
__u32 len; /* IPv4 simply where L4 starts
IPv6 where L4 Transport Header starts */
- __u32 thoff_reasm; /* Transport Header Offset in nfct_reasm skb */
__u16 fragoffs; /* IPv6 fragment offset, 0 if first frag (or not frag)*/
__s16 protocol;
__s32 flags;
@@ -117,34 +116,12 @@ struct ip_vs_iphdr {
union nf_inet_addr daddr;
};
-/* Dependency to module: nf_defrag_ipv6 */
-#if defined(CONFIG_NF_DEFRAG_IPV6) || defined(CONFIG_NF_DEFRAG_IPV6_MODULE)
-static inline struct sk_buff *skb_nfct_reasm(const struct sk_buff *skb)
-{
- return skb->nfct_reasm;
-}
-static inline void *frag_safe_skb_hp(const struct sk_buff *skb, int offset,
- int len, void *buffer,
- const struct ip_vs_iphdr *ipvsh)
-{
- if (unlikely(ipvsh->fragoffs && skb_nfct_reasm(skb)))
- return skb_header_pointer(skb_nfct_reasm(skb),
- ipvsh->thoff_reasm, len, buffer);
-
- return skb_header_pointer(skb, offset, len, buffer);
-}
-#else
-static inline struct sk_buff *skb_nfct_reasm(const struct sk_buff *skb)
-{
- return NULL;
-}
static inline void *frag_safe_skb_hp(const struct sk_buff *skb, int offset,
int len, void *buffer,
const struct ip_vs_iphdr *ipvsh)
{
return skb_header_pointer(skb, offset, len, buffer);
}
-#endif
static inline void
ip_vs_fill_ip4hdr(const void *nh, struct ip_vs_iphdr *iphdr)
@@ -171,19 +148,12 @@ ip_vs_fill_iph_skb(int af, const struct sk_buff *skb, struct ip_vs_iphdr *iphdr)
(struct ipv6hdr *)skb_network_header(skb);
iphdr->saddr.in6 = iph->saddr;
iphdr->daddr.in6 = iph->daddr;
- /* ipv6_find_hdr() updates len, flags, thoff_reasm */
- iphdr->thoff_reasm = 0;
+ /* ipv6_find_hdr() updates len, flags */
iphdr->len = 0;
iphdr->flags = 0;
iphdr->protocol = ipv6_find_hdr(skb, &iphdr->len, -1,
&iphdr->fragoffs,
&iphdr->flags);
- /* get proto from re-assembled packet and it's offset */
- if (skb_nfct_reasm(skb))
- iphdr->protocol = ipv6_find_hdr(skb_nfct_reasm(skb),
- &iphdr->thoff_reasm,
- -1, NULL, NULL);
-
} else
#endif
{
diff --git a/include/net/netfilter/ipv6/nf_defrag_ipv6.h b/include/net/netfilter/ipv6/nf_defrag_ipv6.h
index fd79c9a..17920d8 100644
--- a/include/net/netfilter/ipv6/nf_defrag_ipv6.h
+++ b/include/net/netfilter/ipv6/nf_defrag_ipv6.h
@@ -6,10 +6,7 @@ extern void nf_defrag_ipv6_enable(void);
extern int nf_ct_frag6_init(void);
extern void nf_ct_frag6_cleanup(void);
extern struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb, u32 user);
-extern void nf_ct_frag6_output(unsigned int hooknum, struct sk_buff *skb,
- struct net_device *in,
- struct net_device *out,
- int (*okfn)(struct sk_buff *));
+extern void nf_ct_frag6_consume_orig(struct sk_buff *skb);
struct inet_frags_ctl;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 2c3d0f5..a75022e 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -580,9 +580,6 @@ static void skb_release_head_state(struct sk_buff *skb)
#if IS_ENABLED(CONFIG_NF_CONNTRACK)
nf_conntrack_put(skb->nfct);
#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
- nf_conntrack_put_reasm(skb->nfct_reasm);
-#endif
#ifdef CONFIG_BRIDGE_NETFILTER
nf_bridge_put(skb->nf_bridge);
#endif
diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
index c9b6a6e..97cd750 100644
--- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
@@ -172,63 +172,13 @@ out:
return nf_conntrack_confirm(skb);
}
-static unsigned int __ipv6_conntrack_in(struct net *net,
- unsigned int hooknum,
- struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- int (*okfn)(struct sk_buff *))
-{
- struct sk_buff *reasm = skb->nfct_reasm;
- const struct nf_conn_help *help;
- struct nf_conn *ct;
- enum ip_conntrack_info ctinfo;
-
- /* This packet is fragmented and has reassembled packet. */
- if (reasm) {
- /* Reassembled packet isn't parsed yet ? */
- if (!reasm->nfct) {
- unsigned int ret;
-
- ret = nf_conntrack_in(net, PF_INET6, hooknum, reasm);
- if (ret != NF_ACCEPT)
- return ret;
- }
-
- /* Conntrack helpers need the entire reassembled packet in the
- * POST_ROUTING hook. In case of unconfirmed connections NAT
- * might reassign a helper, so the entire packet is also
- * required.
- */
- ct = nf_ct_get(reasm, &ctinfo);
- if (ct != NULL && !nf_ct_is_untracked(ct)) {
- help = nfct_help(ct);
- if ((help && help->helper) || !nf_ct_is_confirmed(ct)) {
- nf_conntrack_get_reasm(reasm);
- NF_HOOK_THRESH(NFPROTO_IPV6, hooknum, reasm,
- (struct net_device *)in,
- (struct net_device *)out,
- okfn, NF_IP6_PRI_CONNTRACK + 1);
- return NF_DROP_ERR(-ECANCELED);
- }
- }
-
- nf_conntrack_get(reasm->nfct);
- skb->nfct = reasm->nfct;
- skb->nfctinfo = reasm->nfctinfo;
- return NF_ACCEPT;
- }
-
- return nf_conntrack_in(net, PF_INET6, hooknum, skb);
-}
-
static unsigned int ipv6_conntrack_in(unsigned int hooknum,
struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
int (*okfn)(struct sk_buff *))
{
- return __ipv6_conntrack_in(dev_net(in), hooknum, skb, in, out, okfn);
+ return nf_conntrack_in(dev_net(in), PF_INET6, hooknum, skb);
}
static unsigned int ipv6_conntrack_local(unsigned int hooknum,
@@ -242,7 +192,7 @@ static unsigned int ipv6_conntrack_local(unsigned int hooknum,
net_notice_ratelimited("ipv6_conntrack_local: packet too short\n");
return NF_ACCEPT;
}
- return __ipv6_conntrack_in(dev_net(out), hooknum, skb, in, out, okfn);
+ return nf_conntrack_in(dev_net(out), PF_INET6, hooknum, skb);
}
static struct nf_hook_ops ipv6_conntrack_ops[] __read_mostly = {
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index dffdc1a..253566a 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -621,31 +621,16 @@ ret_orig:
return skb;
}
-void nf_ct_frag6_output(unsigned int hooknum, struct sk_buff *skb,
- struct net_device *in, struct net_device *out,
- int (*okfn)(struct sk_buff *))
+void nf_ct_frag6_consume_orig(struct sk_buff *skb)
{
struct sk_buff *s, *s2;
- unsigned int ret = 0;
for (s = NFCT_FRAG6_CB(skb)->orig; s;) {
- nf_conntrack_put_reasm(s->nfct_reasm);
- nf_conntrack_get_reasm(skb);
- s->nfct_reasm = skb;
-
s2 = s->next;
s->next = NULL;
-
- if (ret != -ECANCELED)
- ret = NF_HOOK_THRESH(NFPROTO_IPV6, hooknum, s,
- in, out, okfn,
- NF_IP6_PRI_CONNTRACK_DEFRAG + 1);
- else
- kfree_skb(s);
-
+ consume_skb(s);
s = s2;
}
- nf_conntrack_put_reasm(skb);
}
static int nf_ct_net_init(struct net *net)
diff --git a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
index aacd121..581dd9e 100644
--- a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
+++ b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
@@ -75,8 +75,11 @@ static unsigned int ipv6_defrag(unsigned int hooknum,
if (reasm == skb)
return NF_ACCEPT;
- nf_ct_frag6_output(hooknum, reasm, (struct net_device *)in,
- (struct net_device *)out, okfn);
+ nf_ct_frag6_consume_orig(reasm);
+
+ NF_HOOK_THRESH(NFPROTO_IPV6, hooknum, reasm,
+ (struct net_device *) in, (struct net_device *) out,
+ okfn, NF_IP6_PRI_CONNTRACK_DEFRAG + 1);
return NF_STOLEN;
}
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 4f69e83..1517b50 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1131,12 +1131,6 @@ ip_vs_out(unsigned int hooknum, struct sk_buff *skb, int af)
ip_vs_fill_iph_skb(af, skb, &iph);
#ifdef CONFIG_IP_VS_IPV6
if (af == AF_INET6) {
- if (!iph.fragoffs && skb_nfct_reasm(skb)) {
- struct sk_buff *reasm = skb_nfct_reasm(skb);
- /* Save fw mark for coming frags */
- reasm->ipvs_property = 1;
- reasm->mark = skb->mark;
- }
if (unlikely(iph.protocol == IPPROTO_ICMPV6)) {
int related;
int verdict = ip_vs_out_icmp_v6(skb, &related,
@@ -1606,12 +1600,6 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
#ifdef CONFIG_IP_VS_IPV6
if (af == AF_INET6) {
- if (!iph.fragoffs && skb_nfct_reasm(skb)) {
- struct sk_buff *reasm = skb_nfct_reasm(skb);
- /* Save fw mark for coming frags. */
- reasm->ipvs_property = 1;
- reasm->mark = skb->mark;
- }
if (unlikely(iph.protocol == IPPROTO_ICMPV6)) {
int related;
int verdict = ip_vs_in_icmp_v6(skb, &related, hooknum,
@@ -1663,9 +1651,8 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
/* sorry, all this trouble for a no-hit :) */
IP_VS_DBG_PKT(12, af, pp, skb, 0,
"ip_vs_in: packet continues traversal as normal");
- if (iph.fragoffs && !skb_nfct_reasm(skb)) {
+ if (iph.fragoffs) {
/* Fragment that couldn't be mapped to a conn entry
- * and don't have any pointer to a reasm skb
* is missing module nf_defrag_ipv6
*/
IP_VS_DBG_RL("Unhandled frag, load nf_defrag_ipv6\n");
@@ -1748,38 +1735,6 @@ ip_vs_local_request4(unsigned int hooknum, struct sk_buff *skb,
#ifdef CONFIG_IP_VS_IPV6
/*
- * AF_INET6 fragment handling
- * Copy info from first fragment, to the rest of them.
- */
-static unsigned int
-ip_vs_preroute_frag6(unsigned int hooknum, struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- int (*okfn)(struct sk_buff *))
-{
- struct sk_buff *reasm = skb_nfct_reasm(skb);
- struct net *net;
-
- /* Skip if not a "replay" from nf_ct_frag6_output or first fragment.
- * ipvs_property is set when checking first fragment
- * in ip_vs_in() and ip_vs_out().
- */
- if (reasm)
- IP_VS_DBG(2, "Fragment recv prop:%d\n", reasm->ipvs_property);
- if (!reasm || !reasm->ipvs_property)
- return NF_ACCEPT;
-
- net = skb_net(skb);
- if (!net_ipvs(net)->enable)
- return NF_ACCEPT;
-
- /* Copy stored fw mark, saved in ip_vs_{in,out} */
- skb->mark = reasm->mark;
-
- return NF_ACCEPT;
-}
-
-/*
* AF_INET6 handler in NF_INET_LOCAL_IN chain
* Schedule and forward packets from remote clients
*/
@@ -1916,14 +1871,6 @@ static struct nf_hook_ops ip_vs_ops[] __read_mostly = {
.priority = 100,
},
#ifdef CONFIG_IP_VS_IPV6
- /* After mangle & nat fetch 2:nd fragment and following */
- {
- .hook = ip_vs_preroute_frag6,
- .owner = THIS_MODULE,
- .pf = NFPROTO_IPV6,
- .hooknum = NF_INET_PRE_ROUTING,
- .priority = NF_IP6_PRI_NAT_DST + 1,
- },
/* After packet filtering, change source only for VS/NAT */
{
.hook = ip_vs_reply6,
diff --git a/net/netfilter/ipvs/ip_vs_pe_sip.c b/net/netfilter/ipvs/ip_vs_pe_sip.c
index 9ef22bd..bed5f70 100644
--- a/net/netfilter/ipvs/ip_vs_pe_sip.c
+++ b/net/netfilter/ipvs/ip_vs_pe_sip.c
@@ -65,7 +65,6 @@ static int get_callid(const char *dptr, unsigned int dataoff,
static int
ip_vs_sip_fill_param(struct ip_vs_conn_param *p, struct sk_buff *skb)
{
- struct sk_buff *reasm = skb_nfct_reasm(skb);
struct ip_vs_iphdr iph;
unsigned int dataoff, datalen, matchoff, matchlen;
const char *dptr;
@@ -79,15 +78,10 @@ ip_vs_sip_fill_param(struct ip_vs_conn_param *p, struct sk_buff *skb)
/* todo: IPv6 fragments:
* I think this only should be done for the first fragment. /HS
*/
- if (reasm) {
- skb = reasm;
- dataoff = iph.thoff_reasm + sizeof(struct udphdr);
- } else
- dataoff = iph.len + sizeof(struct udphdr);
+ dataoff = iph.len + sizeof(struct udphdr);
if (dataoff >= skb->len)
return -EINVAL;
- /* todo: Check if this will mess-up the reasm skb !!! /HS */
retc = skb_linearize(skb);
if (retc < 0)
return retc;
--
1.8.3.1

64
Input-evdev-fall-back-to-vmalloc-for-client-event-buffer.patch
View File

@ -1,64 +0,0 @@
From 92eb77d0ffbaa71b501a0a8dabf09a351bf4267f Mon Sep 17 00:00:00 2001
From: Daniel Stone <daniel@fooishbar.org>
Date: Thu, 31 Oct 2013 07:25:34 +0000
Subject: Input: evdev - fall back to vmalloc for client event buffer
evdev always tries to allocate the event buffer for clients using
kzalloc rather than vmalloc, presumably to avoid mapping overhead where
possible. However, drivers like bcm5974, which claims support for
reporting 16 fingers simultaneously, can have an extraordinarily large
buffer. The resultant contiguous order-4 allocation attempt fails due
to fragmentation, and the device is thus unusable until reboot.
Try kzalloc if we can to avoid the mapping overhead, but if that fails,
fall back to vzalloc.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index b6ded17..a06e125 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -18,6 +18,8 @@
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/input/mt.h>
@@ -369,7 +371,11 @@ static int evdev_release(struct inode *inode, struct file *file)
mutex_unlock(&evdev->mutex);
evdev_detach_client(evdev, client);
- kfree(client);
+
+ if (is_vmalloc_addr(client))
+ vfree(client);
+ else
+ kfree(client);
evdev_close_device(evdev);
@@ -389,12 +395,14 @@ static int evdev_open(struct inode *inode, struct file *file)
{
struct evdev *evdev = container_of(inode->i_cdev, struct evdev, cdev);
unsigned int bufsize = evdev_compute_buffer_size(evdev->handle.dev);
+ unsigned int size = sizeof(struct evdev_client) +
+ bufsize * sizeof(struct input_event);
struct evdev_client *client;
int error;
- client = kzalloc(sizeof(struct evdev_client) +
- bufsize * sizeof(struct input_event),
- GFP_KERNEL);
+ client = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
+ if (!client)
+ client = vzalloc(size);
if (!client)
return -ENOMEM;
--
cgit v0.9.2

53
KVM-x86-fix-emulation-of-movzbl-bpl-eax.patch
View File

@ -1,53 +0,0 @@
Bugzilla: 967652
Upstream-status: 3.13 (should hit stable)
From daf727225b8abfdfe424716abac3d15a3ac5626a Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu, 31 Oct 2013 23:05:24 +0100
Subject: [PATCH] KVM: x86: fix emulation of "movzbl %bpl, %eax"
When I was looking at RHEL5.9's failure to start with
unrestricted_guest=0/emulate_invalid_guest_state=1, I got it working with a
slightly older tree than kvm.git. I now debugged the remaining failure,
which was introduced by commit 660696d1 (KVM: X86 emulator: fix
source operand decoding for 8bit mov[zs]x instructions, 2013-04-24)
introduced a similar mis-emulation to the one in commit 8acb4207 (KVM:
fix sil/dil/bpl/spl in the mod/rm fields, 2013-05-30). The incorrect
decoding occurs in 8-bit movzx/movsx instructions whose 8-bit operand
is sil/dil/bpl/spl.
Needless to say, "movzbl %bpl, %eax" does occur in RHEL5.9's decompression
prolog, just a handful of instructions before finally giving control to
the decompressed vmlinux and getting out of the invalid guest state.
Because OpMem8 bypasses decode_modrm, the same handling of the REX prefix
must be applied to OpMem8.
Reported-by: Michele Baldessari <michele@redhat.com>
Cc: stable@vger.kernel.org
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
---
arch/x86/kvm/emulate.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 16c037e..282d28c 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4117,7 +4117,10 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
case OpMem8:
ctxt->memop.bytes = 1;
if (ctxt->memop.type == OP_REG) {
- ctxt->memop.addr.reg = decode_register(ctxt, ctxt->modrm_rm, 1);
+ int highbyte_regs = ctxt->rex_prefix == 0;
+
+ ctxt->memop.addr.reg = decode_register(ctxt, ctxt->modrm_rm,
+ highbyte_regs);
fetch_register_operand(&ctxt->memop);
}
goto mem_common;
--
1.8.3.1

25
alps-Support-for-Dell-XT2-model.patch
View File

@ -1,25 +0,0 @@
From 7673be51f16e978a438bca8ac1bf9e939b7ed7a6 Mon Sep 17 00:00:00 2001
From: Yunkang Tang <yunkang.tang@cn.alps.com>
Date: Thu, 24 Oct 2013 13:39:08 +0800
Subject: [PATCH] Support for Dell XT2 model
Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
---
drivers/input/mouse/alps.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index ca7a26f..24b3626 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -103,6 +103,7 @@ static const struct alps_model_info alps_model_data[] = {
/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
{ { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
+ { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_DUALPOINT }, /* Dell XT2 */
{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
--
1.8.1.2

2580
am335x-bone.patch
View File

File diff suppressed because it is too large Load Diff

2468
arm-am33xx-arm-soc-upstream.patch Normal file
View File

File diff suppressed because it is too large Load Diff

610
arm-am33xx-bblack.patch Normal file
View File

@ -0,0 +1,610 @@
Bugzilla: 1012025
Upstream-status: In beagle github repository https://github.com/beagleboard/kernel
From 82fe302f565e00cfde3e96c6132df93b39525e7b Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Tue, 28 May 2013 17:06:15 +0200
Subject: [PATCH] reset: Add driver for gpio-controlled reset pins
This driver implements a reset controller device that toggle a gpio
connected to a reset pin of a peripheral IC. The delay between assertion
and de-assertion of the reset signal can be configured via device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
.../devicetree/bindings/reset/gpio-reset.txt | 35 +++++
drivers/reset/Kconfig | 11 ++
drivers/reset/Makefile | 1 +
drivers/reset/gpio-reset.c | 169 +++++++++++++++++++++
4 files changed, 216 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/gpio-reset.txt
create mode 100644 drivers/reset/gpio-reset.c
diff --git a/Documentation/devicetree/bindings/reset/gpio-reset.txt b/Documentation/devicetree/bindings/reset/gpio-reset.txt
new file mode 100644
index 0000000..bca5348
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/gpio-reset.txt
@@ -0,0 +1,35 @@
+GPIO reset controller
+=====================
+
+A GPIO reset controller controls a single GPIO that is connected to the reset
+pin of a peripheral IC. Please also refer to reset.txt in this directory for
+common reset controller binding usage.
+
+Required properties:
+- compatible: Should be "gpio-reset"
+- reset-gpios: A gpio used as reset line. The gpio specifier for this property
+ depends on the gpio controller that provides the gpio.
+- #reset-cells: 0, see below
+
+Optional properties:
+- reset-delay-us: delay in microseconds. The gpio reset line will be asserted for
+ this duration to reset.
+- initially-in-reset: boolean. If not set, the initial state should be a
+ deasserted reset line. If this property exists, the
+ reset line should be kept in reset.
+
+example:
+
+sii902x_reset: gpio-reset {
+ compatible = "gpio-reset";
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <10000>;
+ initially-in-reset;
+ #reset-cells = <0>;
+};
+
+/* Device with nRESET pin connected to GPIO5_0 */
+sii902x@39 {
+ /* ... */
+ resets = <&sii902x_reset>; /* active-low GPIO5_0, 10 ms delay */
+};
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c9d04f7..1a862df 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -11,3 +11,14 @@ menuconfig RESET_CONTROLLER
via GPIOs or SoC-internal reset controller modules.
If unsure, say no.
+
+if RESET_CONTROLLER
+
+config RESET_GPIO
+ tristate "GPIO reset controller support"
+ depends on GPIOLIB && OF
+ help
+ This driver provides support for reset lines that are controlled
+ directly by GPIOs.
+
+endif
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 1e2d83f..b854f20 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_RESET_CONTROLLER) += core.o
+obj-$(CONFIG_RESET_GPIO) += gpio-reset.o
diff --git a/drivers/reset/gpio-reset.c b/drivers/reset/gpio-reset.c
new file mode 100644
index 0000000..acc1076
--- /dev/null
+++ b/drivers/reset/gpio-reset.c
@@ -0,0 +1,169 @@
+/*
+ * GPIO Reset Controller driver
+ *
+ * Copyright 2013 Philipp Zabel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+struct gpio_reset_data {
+ struct reset_controller_dev rcdev;
+ unsigned int gpio;
+ bool active_low;
+ u32 delay_us;
+};
+
+static void __gpio_reset_set(struct reset_controller_dev *rcdev, int asserted)
+{
+ struct gpio_reset_data *drvdata = container_of(rcdev,
+ struct gpio_reset_data, rcdev);
+ int value = asserted;
+
+ if (drvdata->active_low)
+ value = !value;
+
+ gpio_set_value(drvdata->gpio, value);
+}
+
+static int gpio_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct gpio_reset_data *drvdata = container_of(rcdev,
+ struct gpio_reset_data, rcdev);
+
+ if (drvdata->delay_us < 0)
+ return -ENOSYS;
+
+ __gpio_reset_set(rcdev, 1);
+ udelay(drvdata->delay_us);
+ __gpio_reset_set(rcdev, 0);
+
+ return 0;
+}
+
+static int gpio_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ __gpio_reset_set(rcdev, 1);
+
+ return 0;
+}
+
+static int gpio_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ __gpio_reset_set(rcdev, 0);
+
+ return 0;
+}
+
+static struct reset_control_ops gpio_reset_ops = {
+ .reset = gpio_reset,
+ .assert = gpio_reset_assert,
+ .deassert = gpio_reset_deassert,
+};
+
+static int of_gpio_reset_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ if (WARN_ON(reset_spec->args_count != 0))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int gpio_reset_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct gpio_reset_data *drvdata;
+ enum of_gpio_flags flags;
+ unsigned long gpio_flags;
+ bool initially_in_reset;
+ int ret;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (drvdata == NULL)
+ return -ENOMEM;
+
+ if (of_gpio_named_count(np, "reset-gpios") != 1)
+ return -EINVAL;
+
+ drvdata->gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags);
+ if (drvdata->gpio == -EPROBE_DEFER) {
+ return drvdata->gpio;
+ } else if (!gpio_is_valid(drvdata->gpio)) {
+ dev_err(&pdev->dev, "invalid reset gpio: %d\n", drvdata->gpio);
+ return drvdata->gpio;
+ }
+
+ drvdata->active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ ret = of_property_read_u32(np, "reset-delay-us", &drvdata->delay_us);
+ if (ret < 0)
+ return ret;
+
+ initially_in_reset = of_property_read_bool(np, "initially-in-reset");
+ if (drvdata->active_low ^ initially_in_reset)
+ gpio_flags = GPIOF_OUT_INIT_HIGH;
+ else
+ gpio_flags = GPIOF_OUT_INIT_LOW;
+
+ ret = devm_gpio_request_one(&pdev->dev, drvdata->gpio, gpio_flags, NULL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request gpio %d: %d\n",
+ drvdata->gpio, ret);
+ return ret;
+ }
+
+ drvdata->rcdev.of_node = np;
+ drvdata->rcdev.owner = THIS_MODULE;
+ drvdata->rcdev.nr_resets = 1;
+ drvdata->rcdev.ops = &gpio_reset_ops;
+ drvdata->rcdev.of_xlate = of_gpio_reset_xlate;
+ reset_controller_register(&drvdata->rcdev);
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+}
+
+static int gpio_reset_remove(struct platform_device *pdev)
+{
+ struct gpio_reset_data *drvdata = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&drvdata->rcdev);
+
+ return 0;
+}
+
+static struct of_device_id gpio_reset_dt_ids[] = {
+ { .compatible = "gpio-reset" },
+ { }
+};
+
+static struct platform_driver gpio_reset_driver = {
+ .probe = gpio_reset_probe,
+ .remove = gpio_reset_remove,
+ .driver = {
+ .name = "gpio-reset",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(gpio_reset_dt_ids),
+ },
+};
+
+module_platform_driver(gpio_reset_driver);
+
+MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
+MODULE_DESCRIPTION("gpio reset controller");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-reset");
+MODULE_DEVICE_TABLE(of, gpio_reset_dt_ids);
--
1.8.2.1
From 03664ac63b20b55af9522449bbad048476d259d5 Mon Sep 17 00:00:00 2001
From: Joel Fernandes <joelf@ti.com>
Date: Wed, 3 Jul 2013 17:29:44 -0500
Subject: [PATCH 2/2] sound: soc: soc-dmaengine-pcm: Add support for new
DMAEngine request API
Formerly these resources were coming HWMOD on OMAP-like SoCs. With the
impending removal of HWMOD data, drivers are being converted to use the
"of-dma" method of requesting DMA channels which from DT and can be obtained
using the dma_request_slave_channel API. Add support to the soc-dmaengine-pcm
helpers so that we can fetch and open channels using this method.
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
sound/core/pcm_dmaengine.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index aa924d9..461fe4f 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -276,6 +276,16 @@ struct dma_chan *snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn,
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_request_channel);
+struct dma_chan *snd_dmaengine_pcm_request_slave_channel(
+ struct snd_pcm_substream *substream, char *name)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct device *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+ return dma_request_slave_channel(dev, name);
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_request_slave_channel);
+
/**
* snd_dmaengine_pcm_open - Open a dmaengine based PCM substream
* @substream: PCM substream
@@ -334,6 +344,18 @@ int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open_request_chan);
+int snd_dmaengine_pcm_open_request_slave_chan(struct snd_pcm_substream *substream, char *name)
+{
+ if(substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ return snd_dmaengine_pcm_open(substream,
+ snd_dmaengine_pcm_request_slave_channel(substream, "tx"));
+ } else {
+ return snd_dmaengine_pcm_open(substream,
+ snd_dmaengine_pcm_request_slave_channel(substream, "rx"));
+ }
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open_request_slave_chan);
+
/**
* snd_dmaengine_pcm_close - Close a dmaengine based PCM substream
* @substream: PCM substream
--
1.8.4.rc3
From ae38683badc8c80b29ccc8aa4e059f900b603551 Mon Sep 17 00:00:00 2001
From: Pantelis Antoniou <panto@antoniou-consulting.com>
Date: Fri, 26 Oct 2012 15:48:00 +0300
Subject: [PATCH 1/2] omap-hsmmc: Correct usage of of_find_node_by_name
of_find_node_by_name expect to have the parent node reference taken.
---
drivers/mmc/host/omap_hsmmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6ac63df..f5b660c 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1893,6 +1893,16 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
* as we want. */
mmc->max_segs = 1024;
+ /* Eventually we should get our max_segs limitation for EDMA by
+ * querying the dmaengine API */
+ if (pdev->dev.of_node) {
+ struct device_node *parent = of_node_get(pdev->dev.of_node->parent);
+ struct device_node *node;
+ node = of_find_node_by_name(parent, "edma");
+ if (node)
+ mmc->max_segs = 16;
+ }
+
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
--
1.8.2.1
From 5d93a65cfc4ff6aaf78ab49f71daa2a644ea2ace Mon Sep 17 00:00:00 2001
From: Pantelis Antoniou <panto@antoniou-consulting.com>
Date: Fri, 30 Nov 2012 12:18:16 +0200
Subject: [PATCH 2/2] omap_hsmmc: Add reset gpio
Add a gpio property for controlling reset of the mmc device.
eMMC on the beaglebone black requires it.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
---
drivers/mmc/host/omap_hsmmc.c | 40 +++++++++++++++++++++++++++++++++-
include/linux/platform_data/mmc-omap.h | 3 +++
2 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index f5b660c..1bdb90f 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -41,6 +41,8 @@
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/mmc-omap.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/err.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
@@ -392,6 +394,7 @@ static inline int omap_hsmmc_have_reg(void)
static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
{
int ret;
+ unsigned long flags;
if (gpio_is_valid(pdata->slots[0].switch_pin)) {
if (pdata->slots[0].cover)
@@ -421,6 +424,24 @@ static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
} else
pdata->slots[0].gpio_wp = -EINVAL;
+ if (gpio_is_valid(pdata->slots[0].gpio_reset)) {
+ flags = pdata->slots[0].gpio_reset_active_low ?
+ GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH;
+ ret = gpio_request_one(pdata->slots[0].gpio_reset, flags,
+ "mmc_reset");
+ if (ret)
+ goto err_free_wp;
+
+ /* hold reset */
+ udelay(pdata->slots[0].gpio_reset_hold_us);
+
+ gpio_set_value(pdata->slots[0].gpio_reset,
+ !pdata->slots[0].gpio_reset_active_low);
+
+ } else
+ pdata->slots[0].gpio_reset = -EINVAL;
+
+
return 0;
err_free_wp:
@@ -434,6 +455,8 @@ err_free_sp:
static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
{
+ if (gpio_is_valid(pdata->slots[0].gpio_reset))
+ gpio_free(pdata->slots[0].gpio_reset);
if (gpio_is_valid(pdata->slots[0].gpio_wp))
gpio_free(pdata->slots[0].gpio_wp);
if (gpio_is_valid(pdata->slots[0].switch_pin))
@@ -788,7 +811,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
* ac, bc, adtc, bcr. Only commands ending an open ended transfer need
* a val of 0x3, rest 0x0.
*/
- if (cmd == host->mrq->stop)
+ if (host->mrq && cmd == host->mrq->stop)
cmdtype = 0x3;
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
@@ -830,6 +853,8 @@ static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_req
int dma_ch;
unsigned long flags;
+ BUG_ON(mrq == NULL);
+
spin_lock_irqsave(&host->irq_lock, flags);
host->req_in_progress = 0;
dma_ch = host->dma_ch;
@@ -1720,6 +1745,7 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
struct device_node *np = dev->of_node;
u32 bus_width, max_freq;
int cd_gpio, wp_gpio;
+ enum of_gpio_flags reset_flags;
cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
@@ -1737,6 +1763,14 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
pdata->nr_slots = 1;
pdata->slots[0].switch_pin = cd_gpio;
pdata->slots[0].gpio_wp = wp_gpio;
+ reset_flags = 0;
+ pdata->slots[0].gpio_reset = of_get_named_gpio_flags(np,
+ "reset-gpios", 0, &reset_flags);
+ pdata->slots[0].gpio_reset_active_low =
+ (reset_flags & OF_GPIO_ACTIVE_LOW) != 0;
+ pdata->slots[0].gpio_reset_hold_us = 100; /* default */
+ of_property_read_u32(np, "reset-gpio-hold-us",
+ &pdata->slots[0].gpio_reset_hold_us);
if (of_find_property(np, "ti,non-removable", NULL)) {
pdata->slots[0].nonremovable = true;
@@ -1802,6 +1836,10 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
return -ENXIO;
}
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "unable to select pin group\n");
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (res == NULL || irq < 0)
diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
index 2bf1b30..d548994 100644
--- a/include/linux/platform_data/mmc-omap.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -115,6 +115,9 @@ struct omap_mmc_platform_data {
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
+ int gpio_reset; /* gpio (reset) */
+ int gpio_reset_active_low; /* 1 if reset is active low */
+ u32 gpio_reset_hold_us; /* time to hold in us */
int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
int (*set_power)(struct device *dev, int slot,
--
1.8.2.1
From b45e4df71f07f2178db133db540e3f15e0b4ec05 Mon Sep 17 00:00:00 2001
From: Pantelis Antoniou <panto@antoniou-consulting.com>
Date: Sat, 15 Sep 2012 12:00:41 +0300
Subject: [PATCH] pinctrl: pinctrl-single must be initialized early.
When using pinctrl-single to handle i2c initialization, it has
to be done early. Whether this is the best way to do so, is an
exercise left to the reader.
---
drivers/pinctrl/pinctrl-single.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index a82ace4..aeef35d 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1673,7 +1673,17 @@ static struct platform_driver pcs_driver = {
#endif
};
-module_platform_driver(pcs_driver);
+static int __init pcs_init(void)
+{
+ return platform_driver_register(&pcs_driver);
+}
+postcore_initcall(pcs_init);
+
+static void __exit pcs_exit(void)
+{
+ platform_driver_unregister(&pcs_driver);
+}
+module_exit(pcs_exit);
MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
MODULE_DESCRIPTION("One-register-per-pin type device tree based pinctrl driver");
--
1.8.2.1
From e5e7abd2de7d8d4c74b5a1ccc6d47988250bd17d Mon Sep 17 00:00:00 2001
From: Pantelis Antoniou <panto@antoniou-consulting.com>
Date: Fri, 28 Jun 2013 18:39:55 +0300
Subject: [PATCH 1/4] dts: beaglebone: Add I2C definitions for EEPROMs & capes
Add the I2C definitions for the EEPROM devices on the baseboard
and on the possibly connected capes.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 39 +++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index e3f27ec..2d12775 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -84,6 +84,13 @@
>;
};
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x178 0x73 /* uart1_ctsn.i2c2_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE3 */
+ 0x17c 0x73 /* uart1_rtsn.i2c2_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE3 */
+ >;
+ };
+
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
@@ -220,6 +227,38 @@
reg = <0x24>;
};
+ baseboard_eeprom: baseboard_eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ cape_eeprom0: cape_eeprom0@54 {
+ compatible = "at,24c256";
+ reg = <0x54>;
+ };
+
+ cape_eeprom1: cape_eeprom1@55 {
+ compatible = "at,24c256";
+ reg = <0x55>;
+ };
+
+ cape_eeprom2: cape_eeprom2@56 {
+ compatible = "at,24c256";
+ reg = <0x56>;
+ };
+
+ cape_eeprom3: cape_eeprom3@57 {
+ compatible = "at,24c256";
+ reg = <0x57>;
+ };
};
/include/ "tps65217.dtsi"
--
1.8.4.rc3

23
arm-am33xx-cpsw.patch Normal file
View File

@ -0,0 +1,23 @@
Bugzilla: 1012025
Upstream-status: An initial work around for the cpsw driver issue trying to access HW registers
with clock disabled. Upstream is working on a proper fix with the hope to land it in 3.13.
--- linux-3.12.4-1.fc20.x86_64/drivers/net/ethernet/ti/cpsw.c.orig 2013-12-11 20:52:41.576478796 +0000
+++ linux-3.12.4-1.fc20.x86_64/drivers/net/ethernet/ti/cpsw.c 2013-12-11 20:55:14.418692261 +0000
@@ -2001,6 +2001,8 @@
goto clean_cpsw_iores_ret;
}
priv->regs = ss_regs;
+
+ pm_runtime_get_sync(&pdev->dev);
priv->version = __raw_readl(&priv->regs->id_ver);
priv->host_port = HOST_PORT_NUM;
@@ -2161,6 +2163,7 @@
goto clean_irq_ret;
}
}
+ pm_runtime_put_sync(&pdev->dev);
return 0;

439
arm-exynos-mp.patch
View File

@ -1,439 +0,0 @@
commit 8b806e0201b97844d0eff4713eb88f0a6d0f689d
Author: Arnd Bergmann <arnd@arndb.de>
Date: Fri Jun 14 17:16:30 2013 +0200
ARM: exynos multiplatform, next try
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e401a76..fad9324 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -422,7 +422,7 @@ choice
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
- select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS_COMMON
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -434,7 +434,7 @@ choice
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
- select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS_COMMON
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -446,7 +446,7 @@ choice
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
- select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS_COMMON
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -457,7 +457,7 @@ choice
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART3
- depends on PLAT_SAMSUNG && ARCH_EXYNOS
+ depends on PLAT_SAMSUNG && ARCH_EXYNOS_COMMON
select DEBUG_EXYNOS_UART
bool "Use S3C UART 3 for low-level debug"
help
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index f3a9cff..8d8d922 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -9,7 +9,7 @@
* published by the Free Software Foundation.
*/
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
/* The S5PV210/S5PC110 implementations are as belows. */
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 855d4a7..8744890 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,13 +7,24 @@
# Configuration options for the EXYNOS4
-if ARCH_EXYNOS
+config ARCH_EXYNOS_MULTI
+ bool "Samsung EXYNOS" if ARCH_MULTI_V7
+ select ARCH_HAS_CPUFREQ
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ help
+ Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
+
+if ARCH_EXYNOS || ARCH_EXYNOS_MULTI
menu "SAMSUNG EXYNOS SoCs Support"
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
- default y
+ default ARCH_EXYNOS
select GIC_NON_BANKED
select HAVE_ARM_SCU if SMP
select HAVE_SMP
@@ -24,12 +35,16 @@ config ARCH_EXYNOS4
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
+ default ARCH_EXYNOS
select HAVE_ARM_SCU if SMP
select HAVE_SMP
select PINCTRL
help
Samsung EXYNOS5 (Cortex-A15) SoC based systems
+config ARCH_EXYNOS_COMMON
+ def_bool ARCH_EXYNOS4 || ARCH_EXYNOS5
+
comment "EXYNOS SoCs"
config CPU_EXYNOS4210
@@ -41,7 +56,7 @@ config CPU_EXYNOS4210
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if !ARCH_MULTIPLATFORM
help
Enable EXYNOS4210 CPU support
@@ -49,10 +64,11 @@ config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
+ select MACH_EXYNOS4_DT
select PINCTRL_EXYNOS
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if !ARCH_MULTIPLATFORM
help
Enable EXYNOS4212 SoC support
@@ -60,8 +76,9 @@ config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
+ select MACH_EXYNOS4_DT
select PINCTRL_EXYNOS
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if !ARCH_MULTIPLATFORM
help
Enable EXYNOS4412 SoC support
@@ -70,11 +87,12 @@ config SOC_EXYNOS5250
default y
depends on ARCH_EXYNOS5
select PINCTRL_EXYNOS
+ select MACH_EXYNOS5_DT
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if !ARCH_MULTIPLATFORM
help
Enable EXYNOS5250 SoC support
@@ -121,9 +139,7 @@ config MACH_EXYNOS4_DT
with this machine file.
config MACH_EXYNOS5_DT
- bool "SAMSUNG EXYNOS5 Machine using device tree"
- default y
- depends on ARCH_EXYNOS5
+ bool
select ARM_AMBA
select CLKSRC_OF
select USB_ARCH_HAS_XHCI
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index e970a7a..ae397bb 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
@@ -5,14 +5,11 @@
#
# Licensed under GPLv2
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung
-# Core
+ifdef CONFIG_ARCH_EXYNOS_COMMON
-obj-$(CONFIG_ARCH_EXYNOS) += common.o
+obj-y += pmu.o
obj-$(CONFIG_S5P_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
@@ -24,8 +21,8 @@
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o
-obj-$(CONFIG_ARCH_EXYNOS) += firmware.o
++obj-y += exynos-smc.o
++obj-y += firmware.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -34,3 +31,5 @@
obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
+
+endif
index 3dc5cbe..e61abdc 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,7 +6,7 @@
config PLAT_SAMSUNG
bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS_COMMON
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT
@@ -176,6 +176,7 @@ config S5P_DEV_UART
config S3C_ADC
bool "ADC common driver support"
+ depends on !ARCH_MULTIPLATFORM
help
Core support for the ADC block found in the Samsung SoC systems
for drivers such as the touchscreen and hwmon to use to share
@@ -396,6 +397,7 @@ config S5P_DEV_USB_EHCI
config S3C24XX_PWM
bool "PWM device support"
+ depends on !ARCH_MULTIPLATFORM
select PWM
select PWM_SAMSUNG
help
@@ -453,7 +455,7 @@ comment "Power management"
config SAMSUNG_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on PM
- select DEBUG_LL
+ depends on DEBUG_LL && SERIAL_SAMSUNG
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 98d07d8..b458e7d 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,6 +4,9 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_EXYNOS_COMMON) += -I$(srctree)/arch/arm/mach-exynos/include
+
obj-y :=
obj-m :=
obj-n := dummy.o
diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
index 7c1e3b7..dc66bb5 100644
--- a/arch/arm/plat-samsung/s5p-irq-pm.c
+++ b/arch/arm/plat-samsung/s5p-irq-pm.c
@@ -40,7 +40,7 @@ int s3c_irq_wake(struct irq_data *data, unsigned int state)
unsigned long irqbit;
unsigned int irq_rtc_tic, irq_rtc_alarm;
-#ifdef CONFIG_ARCH_EXYNOS
+#ifdef CONFIG_ARCH_EXYNOS_COMMON
if (soc_is_exynos5250()) {
irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 81465c2..6bd8b5a 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -75,7 +75,7 @@ config CLKSRC_METAG_GENERIC
This option enables support for the Meta per-thread timers.
config CLKSRC_EXYNOS_MCT
- def_bool y if ARCH_EXYNOS
+ def_bool y if ARCH_EXYNOS_COMMON
help
Support for Multi Core Timer controller on Exynos SoCs.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index de4d5d9..ffe9cb3 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -27,6 +27,7 @@ config ARM_EXYNOS_CPUFREQ
If in doubt, say N.
+if ARM_EXYNOS_CPUFREQ
config ARM_EXYNOS4210_CPUFREQ
def_bool CPU_EXYNOS4210
help
@@ -54,6 +55,7 @@ config ARM_EXYNOS5440_CPUFREQ
SoC. The nature of exynos5440 clock controller is
different than previous exynos controllers so not using
the common exynos framework.
+endif
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 31f3adb..15454ad 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -68,6 +68,7 @@ comment "DEVFREQ Drivers"
config ARM_EXYNOS4_BUS_DEVFREQ
bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412
+ depends on !ARCH_MULTIPLATFORM
select ARCH_HAS_OPP
select DEVFREQ_GOV_SIMPLE_ONDEMAND
help
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 6c6034e..d9ed7c0 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -168,7 +168,7 @@ config TEGRA_IOMMU_SMMU
config EXYNOS_IOMMU
bool "Exynos IOMMU Support"
- depends on ARCH_EXYNOS && EXYNOS_DEV_SYSMMU
+ depends on ARCH_EXYNOS_COMMON && EXYNOS_DEV_SYSMMU
select IOMMU_API
help
Support for the IOMMU(System MMU) of Samsung Exynos application
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 5a8ad51..03688dd 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -252,7 +252,7 @@ config PINCTRL_SAMSUNG
config PINCTRL_EXYNOS
bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
- depends on OF && GPIOLIB && ARCH_EXYNOS
+ depends on OF && GPIOLIB && ARCH_EXYNOS_COMMON
select PINCTRL_SAMSUNG
config PINCTRL_EXYNOS5440
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 75840b5..746a931 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -140,7 +140,7 @@ config PWM_RENESAS_TPU
config PWM_SAMSUNG
tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG && !ARCH_MULTIPLATFORM
help
Generic PWM framework driver for Samsung.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 89cbbab..830b8e7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -365,7 +365,7 @@ config SPI_S3C24XX_FIQ
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
+ depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS_COMMON)
select S3C64XX_DMA if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 4263d01..d7ad720 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -462,7 +462,7 @@ config USB_OHCI_SH
config USB_OHCI_EXYNOS
boolean "OHCI support for Samsung EXYNOS SoC Series"
- depends on ARCH_EXYNOS
+ depends on ARCH_EXYNOS_COMMON
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2c301f8..0ba3e03 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2039,7 +2039,7 @@ config FB_TMIO_ACCELL
config FB_S3C
tristate "Samsung S3C framebuffer support"
depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
- ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS_COMMON)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
index b8abda5..216af14 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/exynos/Kconfig
@@ -15,7 +15,7 @@ if EXYNOS_VIDEO
config EXYNOS_MIPI_DSI
bool "EXYNOS MIPI DSI driver support."
- depends on ARCH_S5PV210 || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS_COMMON
help
This enables support for MIPI-DSI device.
@@ -29,7 +29,7 @@ config EXYNOS_LCD_S6E8AX0
config EXYNOS_DP
bool "EXYNOS DP driver support"
- depends on ARCH_EXYNOS
+ depends on ARCH_EXYNOS_COMMON
default n
help
This enables support for DP device.
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 9855dfc..fcb2045 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,6 +1,6 @@
config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG && !ARCH_MULTIPLATFORM
select S3C64XX_DMA if ARCH_S3C64XX
select S3C2410_DMA if ARCH_S3C24XX
help
--- Makefile.orig 2013-11-04 12:47:11.527488114 -0500
+++ b/arch/arm/boot/dts/Makefile 2013-11-04 12:47:18.933540972 -0500
@@ -48,7 +48,7 @@
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-dove-db.dtb
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+dtb-$(CONFIG_ARCH_EXYNOS_COMMON) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \

200
arm-highbank-for-3.12.patch
View File

@ -1,200 +0,0 @@
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 441efc4..d91b168 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -35,7 +35,7 @@ struct machine_desc {
unsigned int nr_irqs; /* number of IRQs */
#ifdef CONFIG_ZONE_DMA
- unsigned long dma_zone_size; /* size of DMA-able area */
+ phys_addr_t dma_zone_size; /* size of DMA-able area */
#endif
unsigned int video_start; /* start of video RAM */
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 12f71a1..f94784f 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -37,10 +37,10 @@ struct outer_cache_fns {
void (*resume)(void);
};
-#ifdef CONFIG_OUTER_CACHE
-
extern struct outer_cache_fns outer_cache;
+#ifdef CONFIG_OUTER_CACHE
+
static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
{
if (outer_cache.inv_range)
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index cd9fcb1..b9dd13a 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,9 +1,14 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
+ select ARM_ERRATA_764369
+ select ARM_ERRATA_775420
+ select ARM_ERRATA_798181
select ARM_GIC
select ARM_TIMER_SP804
select CACHE_L2X0
@@ -18,3 +23,4 @@ config ARCH_HIGHBANK
select PL320_MBOX
select SPARSE_IRQ
select USE_OF
+ select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8881579..8e63ccd 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -18,14 +18,11 @@
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
-#include <linux/irq.h>
#include <linux/irqchip.h>
-#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
-#include <linux/smp.h>
#include <linux/amba/bus.h>
#include <linux/clk-provider.h>
@@ -35,7 +32,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
#include "core.h"
#include "sysregs.h"
@@ -65,13 +61,11 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
HB_JUMP_TABLE_PHYS(cpu) + 15);
}
-#ifdef CONFIG_CACHE_L2X0
static void highbank_l2x0_disable(void)
{
/* Disable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x0);
}
-#endif
static void __init highbank_init_irq(void)
{
@@ -80,12 +74,13 @@ static void __init highbank_init_irq(void)
if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
highbank_scu_map_io();
-#ifdef CONFIG_CACHE_L2X0
/* Enable PL310 L2 Cache controller */
- highbank_smc1(0x102, 0x1);
- l2x0_of_init(0, ~0UL);
- outer_cache.disable = highbank_l2x0_disable;
-#endif
+ if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
+ of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
+ highbank_smc1(0x102, 0x1);
+ l2x0_of_init(0, ~0UL);
+ outer_cache.disable = highbank_l2x0_disable;
+ }
}
static void __init highbank_timer_init(void)
@@ -176,6 +171,9 @@ static const char *highbank_match[] __initconst = {
};
DT_MACHINE_START(HIGHBANK, "Highbank")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = (4ULL * SZ_1G),
+#endif
.smp = smp_ops(highbank_smp_ops),
.init_irq = highbank_init_irq,
.init_time = highbank_timer_init,
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 15225d8..c0bb66e 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -207,7 +207,7 @@ static void __init arm_bootmem_init(unsigned long start_pfn,
#ifdef CONFIG_ZONE_DMA
-unsigned long arm_dma_zone_size __read_mostly;
+phys_addr_t arm_dma_zone_size __read_mostly;
EXPORT_SYMBOL(arm_dma_zone_size);
/*
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 06fe45c..bff41d4 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -133,6 +133,8 @@ struct pl08x_bus_data {
u8 buswidth;
};
+#define IS_BUS_ALIGNED(bus) IS_ALIGNED((bus)->addr, (bus)->buswidth)
+
/**
* struct pl08x_phy_chan - holder for the physical channels
* @id: physical index to this channel
@@ -845,10 +847,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
- dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
- bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
+ dev_vdbg(&pl08x->adev->dev,
+ "src=0x%08llx%s/%u dst=0x%08llx%s/%u len=%zu\n",
+ (u64)bd.srcbus.addr,
+ cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
bd.srcbus.buswidth,
- bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
+ (u64)bd.dstbus.addr,
+ cctl & PL080_CONTROL_DST_INCR ? "+" : "",
bd.dstbus.buswidth,
bd.remainder);
dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
@@ -886,8 +891,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
return 0;
}
- if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
- (bd.dstbus.addr % bd.dstbus.buswidth)) {
+ if (!IS_BUS_ALIGNED(&bd.srcbus) ||
+ !IS_BUS_ALIGNED(&bd.dstbus)) {
dev_err(&pl08x->adev->dev,
"%s src & dst address must be aligned to src"
" & dst width if peripheral is flow controller",
@@ -908,9 +913,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
*/
if (bd.remainder < mbus->buswidth)
early_bytes = bd.remainder;
- else if ((mbus->addr) % (mbus->buswidth)) {
- early_bytes = mbus->buswidth - (mbus->addr) %
- (mbus->buswidth);
+ else if (!IS_BUS_ALIGNED(mbus)) {
+ early_bytes = mbus->buswidth -
+ (mbus->addr & (mbus->buswidth - 1));
if ((bd.remainder - early_bytes) < mbus->buswidth)
early_bytes = bd.remainder;
}
@@ -928,7 +933,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
* Master now aligned
* - if slave is not then we must set its width down
*/
- if (sbus->addr % sbus->buswidth) {
+ if (!IS_BUS_ALIGNED(sbus)) {
dev_dbg(&pl08x->adev->dev,
"%s set down bus width to one byte\n",
__func__);

95
arm-imx6-utilite.patch Normal file
View File

@ -0,0 +1,95 @@
Add initial support for cm-fx6 module.
cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIE
This patch allows to boot up the module, configures the serial console,
the Ethernet adapter and the hearbeat led.
Signed-off-by: Valentin Raevsky <valentin@xxxxxxxxxxxxxx>
Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6q-cm-fx6.dts | 51 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
new file mode 100644
index 0000000..1080215
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+ model = "CompuLab CM-FX6";
+ compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 31 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -137,6 +137,7 @@
imx6dl-sabresd.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
+ imx6q-cm-fx6.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
--
1.7.9.5

18
arm-omap-load-tfp410.patch
View File

@ -1,14 +1,14 @@
diff -urNp linux-3.9.4-300.fc19.armv7hl_orig/drivers/video/omap2/dss/core.c linux-3.9.4-300.fc19.armv7hl/drivers/video/omap2/dss/core.c
--- linux-3.9.4-300.fc19.armv7hl_orig/drivers/video/omap2/dss/core.c 2013-04-28 20:36:01.000000000 -0400
+++ linux-3.9.4-300.fc19.armv7hl/drivers/video/omap2/dss/core.c 2013-05-31 12:24:07.711334359 -0400
@@ -596,6 +596,9 @@ static int __init omap_dss_init(void)
{
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 60d3958..0e304ce 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -298,6 +298,9 @@ static int __init omap_dss_init(void)
int r;
int i;
+ /* hack to load panel-tfp410 driver */
+ request_module("panel-tfp410");
+ /* hack to load encoder-tfp410 driver */
+ request_module("encoder-tfp410");
+
r = omap_dss_bus_register();
r = platform_driver_probe(&omap_dss_driver, omap_dss_probe);
if (r)
return r;
Binary files linux-3.9.4-300.fc19.armv7hl_orig/drivers/video/omap2/dss/.Makefile.swp and linux-3.9.4-300.fc19.armv7hl/drivers/video/omap2/dss/.Makefile.swp differ

58
arm-wandboard-quad.patch
View File

@ -1,58 +0,0 @@
diff -uNr linux-3.10.0-0.rc7.git0.2.fc20.x86_64/arch/arm/boot/dts/imx6q-wandboard.dts linux-3.10.0-0.rc7.git0.2.fc20.armv7hl/arch/arm/boot/dts/imx6q-wandboard.dts
--- linux-3.10.0-0.rc7.git0.2.fc20.x86_64/arch/arm/boot/dts/imx6q-wandboard.dts 1969-12-31 18:00:00.000000000 -0600
+++ linux-3.10.0-0.rc7.git0.2.fc20.armv7hl/arch/arm/boot/dts/imx6q-wandboard.dts 2013-06-30 15:09:21.350610898 -0500
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+ model = "Wandboard i.MX6 Quad Board";
+ compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ status = "okay";
+};
--- linux-3.11.0-0.rc0.git6.2.fc20.x86_64/arch/arm/boot/dts/Makefile.orig 2013-07-12 10:45:40.231087368 -0500
+++ linux-3.11.0-0.rc0.git6.2.fc20.x86_64/arch/arm/boot/dts/Makefile 2013-07-12 10:48:39.973819470 -0500
@@ -131,6 +131,7 @@
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
+ imx6q-wandboard.dtb \
imx6sl-evk.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \

155
bonding-driver-alb-learning.patch
View File

@ -1,155 +0,0 @@
commit 7eacd03810960823393521063734fc8188446bca
Author: Neil Horman <nhorman@tuxdriver.com>
Date: Fri Sep 13 11:05:33 2013 -0400
bonding: Make alb learning packet interval configurable
running bonding in ALB mode requires that learning packets be sent periodically,
so that the switch knows where to send responding traffic. However, depending
on switch configuration, there may not be any need to send traffic at the
default rate of 3 packets per second, which represents little more than wasted
data. Allow the ALB learning packet interval to be made configurable via sysfs
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Acked-by: Veaceslav Falico <vfalico@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 87bbcfe..9b28e71 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1362,6 +1362,12 @@ To add ARP targets:
To remove an ARP target:
# echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
+To configure the interval between learning packet transmits:
+# echo 12 > /sys/class/net/bond0/bonding/lp_interval
+ NOTE: the lp_inteval is the number of seconds between instances where
+the bonding driver sends learning packets to each slaves peer switch. The
+default interval is 1 second.
+
Example Configuration
---------------------
We begin with the same example that is shown in section 3.3,
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 91f179d..f428ef57 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1472,7 +1472,7 @@ void bond_alb_monitor(struct work_struct *work)
bond_info->lp_counter++;
/* send learning packets */
- if (bond_info->lp_counter >= BOND_ALB_LP_TICKS) {
+ if (bond_info->lp_counter >= BOND_ALB_LP_TICKS(bond)) {
/* change of curr_active_slave involves swapping of mac addresses.
* in order to avoid this swapping from happening while
* sending the learning packets, the curr_slave_lock must be held for
diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index 28d8e4c..c5eff5d 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -36,14 +36,15 @@ struct slave;
* Used for division - never set
* to zero !!!
*/
-#define BOND_ALB_LP_INTERVAL 1 /* In seconds, periodic send of
- * learning packets to the switch
- */
+#define BOND_ALB_DEFAULT_LP_INTERVAL 1
+#define BOND_ALB_LP_INTERVAL(bond) (bond->params.lp_interval) /* In seconds, periodic send of
+ * learning packets to the switch
+ */
#define BOND_TLB_REBALANCE_TICKS (BOND_TLB_REBALANCE_INTERVAL \
* ALB_TIMER_TICKS_PER_SEC)
-#define BOND_ALB_LP_TICKS (BOND_ALB_LP_INTERVAL \
+#define BOND_ALB_LP_TICKS(bond) (BOND_ALB_LP_INTERVAL(bond) \
* ALB_TIMER_TICKS_PER_SEC)
#define TLB_HASH_TABLE_SIZE 256 /* The size of the clients hash table.
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 72df399..55bbb8b 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4416,6 +4416,7 @@ static int bond_check_params(struct bond_params *params)
params->all_slaves_active = all_slaves_active;
params->resend_igmp = resend_igmp;
params->min_links = min_links;
+ params->lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL;
if (primary) {
strncpy(params->primary, primary, IFNAMSIZ);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index eeab40b..c29b836 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1699,6 +1699,44 @@ out:
static DEVICE_ATTR(resend_igmp, S_IRUGO | S_IWUSR,
bonding_show_resend_igmp, bonding_store_resend_igmp);
+
+static ssize_t bonding_show_lp_interval(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
+ return sprintf(buf, "%d\n", bond->params.lp_interval);
+}
+
+static ssize_t bonding_store_lp_interval(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bonding *bond = to_bond(d);
+ int new_value, ret = count;
+
+ if (sscanf(buf, "%d", &new_value) != 1) {
+ pr_err("%s: no lp interval value specified.\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (new_value <= 0) {
+ pr_err ("%s: lp_interval must be between 1 and %d\n",
+ bond->dev->name, INT_MAX);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ bond->params.lp_interval = new_value;
+out:
+ return ret;
+}
+
+static DEVICE_ATTR(lp_interval, S_IRUGO | S_IWUSR,
+ bonding_show_lp_interval, bonding_store_lp_interval);
+
static struct attribute *per_bond_attrs[] = {
&dev_attr_slaves.attr,
&dev_attr_mode.attr,
@@ -1729,6 +1767,7 @@ static struct attribute *per_bond_attrs[] = {
&dev_attr_all_slaves_active.attr,
&dev_attr_resend_igmp.attr,
&dev_attr_min_links.attr,
+ &dev_attr_lp_interval.attr,
NULL,
};
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 7ad8bd5..03cf3fd 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -176,6 +176,7 @@ struct bond_params {
int tx_queues;
int all_slaves_active;
int resend_igmp;
+ int lp_interval;
};
struct bond_parm_tbl {

39
cifs-Allow-LANMAN-auth-for-unencapsulated-auth-methods.patch
View File

@ -1,39 +0,0 @@
From dde2356c8466298bd77fa699e0ea296372eed47b Mon Sep 17 00:00:00 2001
From: Sachin Prabhu <sprabhu@redhat.com>
Date: Fri, 27 Sep 2013 17:35:42 +0000
Subject: cifs: Allow LANMAN auth method for servers supporting unencapsulated authentication methods
This allows users to use LANMAN authentication on servers which support
unencapsulated authentication.
The patch fixes a regression where users using plaintext authentication
were no longer able to do so because of changed bought in by patch
3f618223dc0bdcbc8d510350e78ee2195ff93768
https://bugzilla.redhat.com/show_bug.cgi?id=1011621
Reported-by: Panos Kavalagios <Panagiotis.Kavalagios@eurodyn.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
---
(limited to 'fs/cifs')
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 352358d..e87387d 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -500,9 +500,9 @@ select_sectype(struct TCP_Server_Info *server, enum securityEnum requested)
return NTLMv2;
if (global_secflags & CIFSSEC_MAY_NTLM)
return NTLM;
- /* Fallthrough */
default:
- return Unspecified;
+ /* Fallthrough to attempt LANMAN authentication next */
+ break;
}
case CIFS_NEGFLAVOR_LANMAN:
switch (requested) {
--
cgit v0.9.2

33
config-arm-generic
View File

@ -7,7 +7,13 @@ CONFIG_HW_PERF_EVENTS=y
CONFIG_MMC=y
CONFIG_NFS_FS=y
# CONFIG_PID_IN_CONTEXTIDR is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RTC_DRV_SNVS is not set
CONFIG_BACKLIGHT_PWM=m
@ -17,6 +23,7 @@ CONFIG_ARM_ARCH_TIMER=y
# CONFIG_ARM_DT_BL_CPUFREQ is not set
CONFIG_NR_CPUS=8
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
# ARM AMBA generic HW
CONFIG_ARM_AMBA=y
@ -44,10 +51,11 @@ CONFIG_PROC_DEVICETREE=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DEVICE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_I2C=m
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=m
CONFIG_OF_MTD=y
@ -61,6 +69,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_EXTCON=m
CONFIG_OF_EXTCON=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_ADC_JACK=m
# MTD
CONFIG_MTD_BLKDEVS=m
@ -75,14 +84,29 @@ CONFIG_MTD_OF_PARTS=m
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_OF=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_OF_MTD=y
# GPIO
CONFIG_GENERIC_GPIO=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIOLIB=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_MDIO_GPIO=m
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_RESTART=y
#i2c
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_GPIO=m
CONFIG_I2C_MUX=m
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_PCA9541=m
# Sensors
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_IIO_SYSFS_TRIGGER=m
# MFD
CONFIG_MFD_CORE=m
@ -101,9 +125,6 @@ CONFIG_SMC911X=m
# CONFIG_IRQ_DOMAIN_DEBUG is not set
# CONFIG_LEDS_RENESAS_TPU is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_I2C=y
### turn off things which make no sense on embedded SoC

33
config-arm64
View File

@ -30,7 +30,6 @@ CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GPIO_DEVRES=y
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
@ -67,7 +66,6 @@ CONFIG_VM_EVENT_COUNTERS=y
# not arm64
# CONFIG_HW_RANDOM_ATMEL is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
@ -81,33 +79,4 @@ CONFIG_VM_EVENT_COUNTERS=y
# dma issues in headers
# CONFIG_PARPORT_PC is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_CHARGER_MAX8997 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_RTC_DRV_MAX8997 is not set
# CONFIG_EXTCON_MAX8997 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_POWER_RESET_XGENE=y

120
config-armv7
View File

@ -10,7 +10,7 @@ CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SOCFPGA=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_TEGRA=y
# CONFIG_ARCH_U8500 is not set
CONFIG_ARCH_U8500=y
# CONFIG_ARCH_VIRT is not set
CONFIG_ARCH_ZYNQ=y
@ -19,9 +19,6 @@ CONFIG_ARCH_ZYNQ=y
# CONFIG_XEN is not set
# CONFIG_ARM_VIRT_EXT is not set
# Generic
CONFIG_REMOTEPROC=m
# mvebu
CONFIG_MACH_ARMADA_370_XP=y
CONFIG_MACH_ARMADA_370=y
@ -58,12 +55,11 @@ CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
# CONFIG_SOC_DRA7XX is not set
# CONFIG_SOC_OMAP2420 is not set
# CONFIG_SOC_OMAP2430 is not set
CONFIG_SOC_OMAP3430=y
CONFIG_SOC_TI81XX=y
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_DEVKIT8000=y
@ -71,8 +67,8 @@ CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OMAP3530_LV_SOM=y
CONFIG_MACH_OMAP3_TORPEDO=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3EVM=y
CONFIG_MACH_OMAP3517EVM=y
# CONFIG_MACH_OMAP3EVM is not set
# CONFIG_MACH_OMAP3517EVM is not set
CONFIG_MACH_CRANEBOARD=y
CONFIG_MACH_OMAP3_PANDORA=y
CONFIG_MACH_TOUCHBOOK=y
@ -87,8 +83,8 @@ CONFIG_MACH_CM_T3517=y
CONFIG_MACH_IGEP0030=y
CONFIG_MACH_SBC3530=y
CONFIG_MACH_OMAP_3630SDP=y
CONFIG_MACH_TI8168EVM=y
CONFIG_MACH_TI8148EVM=y
# CONFIG_MACH_TI8168EVM is not set
# CONFIG_MACH_TI8148EVM is not set
CONFIG_SOC_HAS_REALTIME_COUNTER=y
CONFIG_OMAP_RESET_CLOCKS=y
@ -113,17 +109,6 @@ CONFIG_OMAP3_EMU=y
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_TI_ST=m
CONFIG_TI_EDMA=y
CONFIG_TI_DAC7512=m
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_TI_DAVINCI_MDIO=y
CONFIG_TI_DAVINCI_CPDMA=y
CONFIG_TI_CPSW=y
CONFIG_TI_CPTS=y
CONFIG_TI_EMIF=m
CONFIG_REGULATOR_TI_ABB=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
@ -136,31 +121,26 @@ CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_MADC=m
CONFIG_TWL4030_POWER=y
CONFIG_TWL4030_WATCHDOG=m
CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_OMAP_USB2=m
CONFIG_OMAP_USB3=m
CONFIG_TWL4030_USB=m
CONFIG_TWL6030_USB=m
CONFIG_TWL6030_PWM=m
CONFIG_TWL6040_CORE=y
CONFIG_CLK_TWL6040=m
CONFIG_OMAP_INTERCONNECT=m
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MTD_ONENAND_OMAP2=m
CONFIG_HDQ_MASTER_OMAP=m
CONFIG_REGULATOR_TWL4030=y
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_OMAP_OCP2SCP=m
CONFIG_OMAP_USB2=m
CONFIG_OMAP_USB3=m
CONFIG_USB_EHCI_HCD_OMAP=m
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_OHCI_HCD_OMAP3=y
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_TI_CPPI41_DMA=m
CONFIG_AM335X_PHY_USB=m
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_GADGET_MUSB_HDRC is not set
# CONFIG_USB_MUSB_DEBUG is not set
CONFIG_OMAP_CONTROL_USB=m
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
@ -169,6 +149,7 @@ CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_SENSORS_TWL4030_MADC=m
CONFIG_TWL6030_GPADC=m
# OMAP5 (possibly other devices too)
CONFIG_MFD_PALMAS=y
@ -181,19 +162,16 @@ CONFIG_GPIO_PALMAS=y
CONFIG_WL_TI=y
CONFIG_WLCORE_SDIO=m
CONFIG_WLCORE_SPI=m
CONFIG_WL1251_SPI=m
CONFIG_WL12XX_SPI=m
CONFIG_WL12XX_SDIO_TEST=m
CONFIG_WL18XX=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_NFC_WILINK=m
CONFIG_MTD_NAND_OMAP2=m
CONFIG_SPI_DAVINCI=m
CONFIG_SPI_OMAP24XX=m
CONFIG_MFD_TI_SSP=m
CONFIG_SPI_TI_SSP=m
CONFIG_SPI_TI_QSPI=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
@ -225,7 +203,6 @@ CONFIG_CRYPTO_DEV_OMAP_SHAM=m
CONFIG_CRYPTO_DEV_OMAP_AES=m
CONFIG_HW_RANDOM_OMAP=m
CONFIG_DRM_TILCDC=m
CONFIG_DRM_OMAP=m
CONFIG_DRM_OMAP_NUM_CRTCS=2
CONFIG_OMAP2_VRFB=y
@ -248,17 +225,6 @@ CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET=y
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_PANEL_GENERIC_DPI=m
CONFIG_PANEL_TFP410=m
CONFIG_PANEL_SHARP_LS037V7DW01=m
CONFIG_PANEL_PICODLP=m
CONFIG_PANEL_TAAL=m
CONFIG_PANEL_NEC_NL8048HL11_01B=m
CONFIG_PANEL_TPO_TD043MTEA1=m
CONFIG_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_PANEL_ACX565AKM=m
# CONFIG_PANEL_N8X0 is not set
CONFIG_DISPLAY_ENCODER_TFP410=m
CONFIG_DISPLAY_ENCODER_TPD12S015=m
CONFIG_DISPLAY_CONNECTOR_DVI=m
@ -293,6 +259,7 @@ CONFIG_SND_OMAP_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_OMAP_SOC_AM3517EVM=m
CONFIG_SND_OMAP_SOC_DMIC=m
CONFIG_SND_OMAP_SOC_HDMI=m
CONFIG_SND_OMAP_SOC_IGEP0020=m
CONFIG_SND_OMAP_SOC_MCBSP=m
CONFIG_SND_OMAP_SOC_MCPDM=m
@ -329,13 +296,43 @@ CONFIG_OMAP_REMOTEPROC=m
# CONFIG_OMAP_MUX_DEBUG is not set
# CONFIG_VIDEO_OMAP3_DEBUG is not set
# AM33xx
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_AM335X_CONTROL_USB=m
CONFIG_AM335X_PHY_USB=m
CONFIG_USB_MUSB_AM335X_CHILD=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_TI_ST=m
CONFIG_TI_DAC7512=m
CONFIG_TI_DAVINCI_EMAC=m
CONFIG_TI_DAVINCI_MDIO=m
CONFIG_TI_DAVINCI_CPDMA=m
CONFIG_TI_CPSW=m
CONFIG_TI_CPTS=y
CONFIG_TI_EMIF=m
CONFIG_DRM_TILCDC=m
CONFIG_SPI_DAVINCI=m
CONFIG_REGULATOR_TI_ABB=m
CONFIG_TI_PRIV_EDMA=y
CONFIG_TI_EDMA=y
# Terribly unstable so disable for now
# CONFIG_USB_TI_CPPI41_DMA is not set
# CONFIG_TI_CPPI41 is not set
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_CHARGER_BQ24190=m
CONFIG_TI_ADC081C=m
CONFIG_TI_AM335X_ADC=m
CONFIG_PWM_TIPWMSS=y
# Allwinner a1x
CONFIG_PINCTRL_SUNXI=y
CONFIG_SUNXI_WATCHDOG=m
CONFIG_MDIO_SUN4I=m
CONFIG_NET_VENDOR_ALLWINNER=y
CONFIG_SUN4I_EMAC=m
# imx
# i.MX
CONFIG_MXC_IRQ_PRIOR=y
# CONFIG_MXC_DEBUG_BOARD is not set
CONFIG_SOC_IMX53=y
@ -345,6 +342,7 @@ CONFIG_MACH_IMX51_DT=y
# CONFIG_MACH_MX51_BABBAGE is not set
# CONFIG_MACH_EUKREA_CPUIMX51SD is not set
CONFIG_ARM_IMX6Q_CPUFREQ=m
CONFIG_IMX_THERMAL=m
CONFIG_PATA_IMX=m
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_UDC=y
@ -356,6 +354,7 @@ CONFIG_FEC=m
CONFIG_KEYBOARD_IMX=m
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_PINCTRL_IMX6SL=y
CONFIG_I2C_IMX=m
CONFIG_SPI_IMX=m
CONFIG_MFD_MC13783=m
@ -365,6 +364,7 @@ CONFIG_IMX_WEIM=y
CONFIG_IMX2_WDT=m
CONFIG_HW_RANDOM_MXC_RNGA=m
CONFIG_CRYPTO_DEV_SAHARA=m
CONFIG_RTC_DRV_SNVS=m
# CONFIG_FB_MX3 is not set
CONFIG_SND_IMX_SOC=m
@ -377,6 +377,7 @@ CONFIG_SND_SOC_IMX_PCM_DMA=m
CONFIG_SND_SOC_IMX_SGTL5000=m
CONFIG_SND_SOC_IMX_WM8962=m
CONFIG_SND_SOC_IMX_MC13783=m
CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_USB_EHCI_MXC=m
CONFIG_USB_IMX21_HCD=m
@ -398,6 +399,7 @@ CONFIG_PWM_IMX=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_DRM_IMX=m
CONFIG_DRM_IMX_FB_HELPER=m
CONFIG_DRM_IMX_HDMI=m
CONFIG_DRM_IMX_IPUV3_CORE=m
CONFIG_DRM_IMX_IPUV3=m
# CONFIG_DRM_IMX_LDB is not set
@ -412,6 +414,7 @@ CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_LEDS_MC13783=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_CAN_FLEXCAN=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_88PM80X_ONKEY=m
@ -437,11 +440,6 @@ CONFIG_RTC_DRV_DA9055=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9055=m
# exynos
# CONFIG_DRM_EXYNOS is not set
# CONFIG_PINCTRL_EXYNOS5440 is not set
# CONFIG_PINCTRL_EXYNOS is not set
# picoxcell
CONFIG_CRYPTO_DEV_PICOXCELL=m
CONFIG_HW_RANDOM_PICOXCELL=m
@ -452,6 +450,7 @@ CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_UX500_DT=y
CONFIG_ABX500_CORE=y
CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_UX500_DEBUG_UART=2
CONFIG_AB8500_CORE=y
CONFIG_STE_DMA40=y
@ -485,6 +484,19 @@ CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_UX500_WATCHDOG=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m
# tegra
CONFIG_ARCH_TEGRA_2x_SOC=y
@ -496,7 +508,7 @@ CONFIG_TEGRA30_MC=y
CONFIG_SERIAL_TEGRA=y
CONFIG_TEGRA_PCI=y
CONFIG_PCI_TEGRA=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_MMC_SDHCI_TEGRA=m
@ -567,7 +579,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_COMMON_CLK_AXI_CLKGEN=m
CONFIG_CPU_IDLE_ZYNQ=y
CONFIG_ARM_ZYNQ_CPUIDLE=y
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=m
@ -582,6 +594,7 @@ CONFIG_MFD_T7L66XB=y
CONFIG_MFD_TC6387XB=y
# Generic drivers
CONFIG_REMOTEPROC=m
# Regulator drivers
CONFIG_REGULATOR_FAN53555=m
@ -634,7 +647,6 @@ CONFIG_REGULATOR_MAX8973=m
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_POWER_RESET_QNAP is not set
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_DRM_TEGRA_DEBUG is not set

70
config-armv7-generic
View File

@ -14,6 +14,7 @@ CONFIG_AEABI=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_THUMB=y
@ -56,14 +57,15 @@ CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# highbank
# 2013/04/19 - stability issues
# CONFIG_CPU_IDLE_CALXEDA is not set
CONFIG_EDAC_HIGHBANK_MC=m
CONFIG_EDAC_HIGHBANK_L2=m
CONFIG_SATA_HIGHBANK=m
CONFIG_ARM_HIGHBANK_CPUFREQ=m
CONFIG_ARM_HIGHBANK_CPUIDLE=y
# errata
# v5/v6
@ -93,6 +95,7 @@ CONFIG_PL310_ERRATA_769419=y
CONFIG_PJ4B_ERRATA_4742=y
# Cortex-A15
# CONFIG_ARM_ERRATA_798181 is not set
# CONFIG_ARM_ERRATA_773022 is not set
# generic that deviates from or should be merged into config-generic
CONFIG_SMP_ON_UP=y
@ -104,13 +107,10 @@ CONFIG_SCHED_SMT=y
CONFIG_RCU_FANOUT=32
CONFIG_VIRTIO_CONSOLE=m
# 2013/04/19 - disable due to stability issues in 3.9 for the moment
# CONFIG_CPU_IDLE is not set
## CONFIG_CPU_IDLE_GOV_LADDER is not set
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
@ -138,7 +138,6 @@ CONFIG_LBDAF=y
CONFIG_USE_OF=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_I2C_MUX_PINCTRL=m
# General vexpress ARM drivers
CONFIG_ARM_TIMER_SP804=y
@ -156,6 +155,7 @@ CONFIG_PL330_DMA=m
CONFIG_AMBA_PL08X=y
CONFIG_ARM_SP805_WATCHDOG=m
CONFIG_GPIO_PL061=y
CONFIG_PL320_MBOX=y
# usb
CONFIG_USB_OTG=y
@ -240,6 +240,7 @@ CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_PINCTRL_SAMSUNG is not set
# CONFIG_PINCTRL_EXYNOS4 is not set
@ -248,7 +249,6 @@ CONFIG_GPIO_GENERIC_PLATFORM=m
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_MCP23S08=m
CONFIG_POWER_RESET_GPIO=y
CONFIG_SERIAL_8250_EM=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
CONFIG_MDIO_BUS_MUX_GPIO=m
@ -302,9 +302,11 @@ CONFIG_MPCORE_WATCHDOG=m
# Thermal / powersaving
CONFIG_THERMAL=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_ARM_PSCI=y
# Mailbox
CONFIG_MAILBOX=y
# MTD
# CONFIG_MG_DISK is not set
CONFIG_MTD_DATAFLASH=m
@ -328,20 +330,28 @@ CONFIG_SPI_DW_PCI=m
# CONFIG_MMC_DW_EXYNOS is not set
# CONFIG_MMC_DW_IDMAC is not set
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_OMAP=m
CONFIG_USB_DWC3_EXYNOS=m
CONFIG_USB_DWC3_PCI=m
# CONFIG_USB_DWC3_DEBUG is not set
CONFIG_DW_WATCHDOG=m
# Sound
CONFIG_SND_ARM=y
CONFIG_SND_ARMAACI=m
CONFIG_SND_SOC=m
CONFIG_SND_SPI=y
CONFIG_SND_ARM=y
CONFIG_SND_ARMAACI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_JACK=y
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_SOC_CACHE_LZO=y
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_DMAENGINE_PCM=y
CONFIG_SND_SOC_CACHE_LZO=y
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_ATMEL_SOC is not set
@ -365,10 +375,8 @@ CONFIG_RTC_DRV_TPS80031=m
# Regulators
CONFIG_REGULATOR=y
CONFIG_RFKILL_REGULATOR=m
CONFIG_CHARGER_MANAGER=y
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_GPIO=m
@ -378,6 +386,7 @@ CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
@ -396,16 +405,25 @@ CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TPS80031=m
CONFIG_CHARGER_TPS65090=m
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_TPS65090=m
CONFIG_PDA_POWER=m
CONFIG_GENERIC_ADC_BATTERY=m
# Sensors
CONFIG_TMP006=m
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
CONFIG_BMP085_SPI=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_LIS3_SPI=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_LIS3_SPI=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_MAX1111=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
@ -434,9 +452,10 @@ CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_BMP085_SPI=m
# Display
# Contiguous Memory Allocator
CONFIG_OF_RESERVED_MEM=y
CONFIG_CMA=y
CONFIG_DMA_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
@ -445,6 +464,7 @@ CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
CONFIG_SRAM=y
# Ethernet
CONFIG_KS8851=m
@ -479,6 +499,9 @@ CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# Sensors
CONFIG_SENSORS_HTU21=m
# Should be in generic
CONFIG_BPF_JIT=y
# CONFIG_NET_VENDOR_CIRRUS is not set
@ -512,6 +535,7 @@ CONFIG_BPF_JIT=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_FSL_DSPI is not set
# these modules all fail with missing __bad_udelay
# http://www.spinics.net/lists/arm/msg15615.html provides some background

36
config-armv7-lpae
View File

@ -32,6 +32,7 @@ CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
# Cortex-A15
CONFIG_ARM_ERRATA_798181=y
CONFIG_ARM_ERRATA_773022=y
CONFIG_KVM=y
CONFIG_KVM_ARM_HOST=y
@ -65,7 +66,9 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SOC_EXYNOS5250=y
CONFIG_SOC_EXYNOS5420=y
CONFIG_SOC_EXYNOS5440=y
CONFIG_ARM_EXYNOS_CPUFREQ=y
# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
# CONFIG_ARM_EXYNOS5440_CPUFREQ is not set
# CONFIG_ARM_EXYNOS_CPUFREQ is not set
# CONFIG_GENERIC_CPUFREQ_CPU0 is not set
CONFIG_EXYNOS_THERMAL=m
CONFIG_PCI_EXYNOS=y
@ -134,31 +137,6 @@ CONFIG_S3C_LOWLEVEL_UART_PORT=1
# CONFIG_S3C2410_WATCHDOG is not set
# CONFIG_MMC_SDHCI_S3C is not set
# CONFIG_TEGRA_HOST1X is not set
# CONFIG_CHARGER_MAX8997 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_RTC_DRV_MAX8997 is not set
# CONFIG_EXTCON_MAX8997 is not set
# CONFIG_SPI_DAVINCI is not set
# CONFIG_I2C_DAVINCI is not set
# CONFIG_TI_SOC_THERMAL is not set

203
config-generic
View File

@ -61,6 +61,8 @@ CONFIG_PID_NS=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_NET_NS=y
# CONFIG_USER_NS is not set
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_PREEMPT_NONE is not set
@ -146,6 +148,7 @@ CONFIG_MMC_VUB300=m
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
@ -160,6 +163,7 @@ CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
# CONFIG_INFINIBAND_EXPERIMENTAL_UVERBS_FLOW_STEERING is not set #staging
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
@ -205,6 +209,7 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_CMA is not set
# CONFIG_DMA_CMA is not set
# CONFIG_SPI is not set
@ -331,6 +336,7 @@ CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
@ -438,6 +444,7 @@ CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_ESAS2R=m
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
@ -935,6 +942,7 @@ CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
@ -968,6 +976,7 @@ CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
@ -1097,6 +1106,7 @@ CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_CLS=y
CONFIG_NET_CLS_ACT=y
@ -1143,6 +1153,7 @@ CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_VSOCKETS=m
CONFIG_NETPRIO_CGROUP=m
@ -1331,7 +1342,7 @@ CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_PTP=y
CONFIG_I40E=m
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_MARVELL=y
@ -1376,6 +1387,7 @@ CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
@ -1679,6 +1691,7 @@ CONFIG_RT2500USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
@ -1699,12 +1712,9 @@ CONFIG_USB_NET_SMSC75XX=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WL12XX_MENU=m
CONFIG_WL12XX=m
# CONFIG_WL12XX_HT is not set
CONFIG_WL12XX_SPI=m
CONFIG_WL12XX_SDIO=m
# CONFIG_WL12XX_SDIO_TEST is not set
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
@ -2017,6 +2027,7 @@ CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
#
# Input I/O drivers
@ -2200,6 +2211,7 @@ CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_ST33_I2C is not set
# CONFIG_TCG_XEN is not set
CONFIG_TELCLOCK=m
#
@ -2238,6 +2250,13 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
@ -2347,10 +2366,12 @@ CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# FIXME: IBMAEM x86 only?
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
@ -2452,17 +2473,125 @@ CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# Industrial I/O subsystem configuration
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
# CONFIG_IIO_KFIFO_BUF is not set
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5064 is not set
# CONFIG_BMA180 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
# CONFIG_ITG3200 is not set
# CONFIG_APDS9300 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_EXYNOS_ADC is not set
# CONFIG_VIPERBOARD_ADC is not set
# CONFIG_INV_MPU6050_IIO is not set
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
# CONFIG_ADJD_S311 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_VCNL4000 is not set
# CONFIG_AK8975 is not set
# CONFIG_TMP006 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_KXSD9 is not set
# CONFIG_AD7266 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_MCP320X is not set
# CONFIG_AD8366 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5686 is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_AD9523 is not set
# CONFIG_ADF4350 is not set
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16480 is not set
# staging IIO drivers
# CONFIG_AD7291 is not set
# CONFIG_AD7606 is not set
# CONFIG_AD799X is not set
# CONFIG_ADT7316 is not set
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7746 is not set
# CONFIG_AD5933 is not set
# CONFIG_ADE7854 is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_SENSORS_HMC5843 is not set
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16204 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
# CONFIG_LIS3L02DQ is not set
# CONFIG_SCA3000 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
# CONFIG_AD7280 is not set
# CONFIG_AD5930 is not set
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
# CONFIG_AD9850 is not set
# CONFIG_AD9852 is not set
# CONFIG_AD9910 is not set
# CONFIG_AD9951 is not set
# CONFIG_ADIS16060 is not set
# CONFIG_ADE7753 is not set
# CONFIG_ADE7754 is not set
# CONFIG_ADE7758 is not set
# CONFIG_ADE7759 is not set
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set
# CONFIG_HMC6352 is not set
# CONFIG_BMP085 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_W1=m
CONFIG_W1_CON=y
@ -2604,6 +2733,7 @@ CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
# CONFIG_RTC_DRV_MOXART is not set
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
@ -2645,6 +2775,7 @@ CONFIG_DRM_MGAG200=m # do not enable on f17 or older
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_VIA=m
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
@ -2722,6 +2853,7 @@ CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
@ -2746,6 +2878,7 @@ CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_STK1160_AC97=y
CONFIG_VIDEO_W9966=m
@ -2926,6 +3059,7 @@ CONFIG_IR_GPIO_CIR=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SH_VEU is not set
# CONFIG_VIDEO_RENESAS_VSP1 is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
@ -3231,9 +3365,15 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_FUSBH200_HCD=m
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=m
@ -3242,8 +3382,6 @@ CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_FUSBH200_HCD=m
#
# USB Device Class drivers
@ -3333,9 +3471,14 @@ CONFIG_HID_SMARTJOYPLUS=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
@ -3403,6 +3546,7 @@ CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
@ -3446,6 +3590,7 @@ CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
@ -3490,6 +3635,7 @@ CONFIG_USB_USS720=m
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
@ -3584,6 +3730,7 @@ CONFIG_USB_PHY=y
# CONFIG_OMAP_USB2 is not set
# CONFIG_OMAP_USB3 is not set
# CONFIG_OMAP_CONTROL_USB is not set
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USBPHY is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
@ -3600,8 +3747,6 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_GADGET is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_ISIGHTFW=m
@ -3628,6 +3773,7 @@ CONFIG_RADIO_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_STKWEBCAM=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_UEAGLEATM=m
@ -3706,6 +3852,7 @@ CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_DA9063 is not set
#
# File systems
@ -3755,6 +3902,7 @@ CONFIG_AUTOFS4_FS=y
CONFIG_NILFS2_FS=m
# CONFIG_LOGFS is not set
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_BLK_DEV_RBD=m
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
@ -3809,6 +3957,7 @@ CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
@ -3910,6 +4059,7 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_CONFIGFS_FS=y
@ -3947,6 +4097,7 @@ CONFIG_SUN_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_NLS=y
@ -4035,6 +4186,9 @@ CONFIG_HEADERS_CHECK=y
# This generates a huge amount of dmesg spew
# CONFIG_DEBUG_KOBJECT is not set
#
# This breaks booting until the module patches are in-tree
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
#
#
# These debug options are deliberatly left on (even in 'make release' kernels).
# They aren't that much of a performance impact, and the value
@ -4236,6 +4390,9 @@ CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
@ -4385,7 +4542,8 @@ CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_RENESAS_TPU is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
@ -4475,6 +4633,7 @@ CONFIG_POWER_SUPPLY=y
# CONFIG_TEST_POWER is not set
CONFIG_APM_POWER=m
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
@ -4494,6 +4653,7 @@ CONFIG_APM_POWER=m
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_POWER_RESET=y
# CONFIG_PDA_POWER is not set
@ -4509,6 +4669,7 @@ CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
@ -4548,6 +4709,7 @@ CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
@ -4616,6 +4778,7 @@ CONFIG_STAGING_MEDIA=y
# CONFIG_TI_ST is not set
# CONFIG_FB_XGI is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_USB_MSI3101 is not set
# CONFIG_DT3155 is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
@ -4628,7 +4791,6 @@ CONFIG_USB_ATMEL=m
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_RAR_REGISTER is not set
# CONFIG_VT6656 is not set
@ -4642,6 +4804,7 @@ CONFIG_RTL8192E=m
# CONFIG_INPUT_GPIO is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_R8187SE is not set
# CONFIG_R8188EU is not set
# CONFIG_RTL8192U is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_SPECTRA is not set
@ -4649,6 +4812,7 @@ CONFIG_RTL8192E=m
# CONFIG_EASYCAP is not set
# CONFIG_SOLO6X10 is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_R8712U=m # Larry Finger maintains this (rhbz 699618)
# CONFIG_R8712_AP is not set
# CONFIG_ATH6K_LEGACY is not set
@ -4682,6 +4846,10 @@ CONFIG_ALTERA_STAPL=m
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_SB105X is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_XILLYBUS is not set
# CONFIG_DGAP is not set
# CONFIG_DGNC is not set
# END OF STAGING
#
@ -4737,6 +4905,7 @@ CONFIG_MAC802154=m
CONFIG_NET_MPLS_GSO=m
# CONFIG_EXTCON is not set
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_MEMORY is not set
CONFIG_PPS=m
@ -4766,6 +4935,7 @@ CONFIG_ZSWAP=y
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_GPIO_SYSFS=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
@ -4834,6 +5004,7 @@ CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
@ -4862,5 +5033,3 @@ CONFIG_FMC_CHARDEV=m
# CONFIG_CRYPTO_KEY_TYPE is not set
# CONFIG_PGP_LIBRARY is not set
# CONFIG_PGP_PRELOAD is not set
# CONFIG_AM335X_PHY_USB is not set

27
config-no-extra Normal file
View File

@ -0,0 +1,27 @@
### config-no-extra: only (to a first approximation) modules listed in
### mod-extra.list should be listed here.
# CONFIG_ISDN is not set
# CONFIG_RDS is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_ATALK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_DEV_APPLETALK is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HERMES is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_CUSE is not set
# CONFIG_AFFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set

3
config-powerpc-generic
View File

@ -334,7 +334,6 @@ CONFIG_I2C_MPC=m
# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
# CONFIG_CRYPTO_SHA1_PPC is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_CAN_FLEXCAN is not set
@ -380,3 +379,5 @@ CONFIG_BACKLIGHT_PWM=m
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=n
CONFIG_XZ_DEC_POWERPC=y
CONFIG_CRASH=m

4
config-powerpc64
View File

@ -136,6 +136,8 @@ CONFIG_RELOCATABLE=y
CONFIG_RCU_FANOUT=64
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=y
# CONFIG_KVM_EXIT_TIMING is not set
@ -176,5 +178,3 @@ CONFIG_BPF_JIT=y
# CONFIG_PPC_TRANSACTIONAL_MEM is not set
# CONFIG_SND_HDA_INTEL is not set
CONFIG_BLK_DEV_RSXX=m
CONFIG_CRASH=m

2
config-powerpc64p7
View File

@ -127,6 +127,8 @@ CONFIG_RELOCATABLE=y
CONFIG_RCU_FANOUT=64
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=y
# CONFIG_KVM_EXIT_TIMING is not set

5
config-s390x
View File

@ -235,8 +235,6 @@ CONFIG_SCM_BLOCK_CLUSTER_WRITE=y
# CONFIG_S390_PTDUMP is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_PCI is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_HID is not set
@ -249,6 +247,7 @@ CONFIG_SCM_BLOCK_CLUSTER_WRITE=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_SERIO is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_AUXDISPLAY is not set
@ -267,6 +266,8 @@ CONFIG_SCM_BLOCK_CLUSTER_WRITE=y
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_PTP_1588_CLOCK is not set
# CONFIG_PPS is not set
# CONFIG_PHYLIB is not set
# CONFIG_ATM_DRIVERS is not set

11
config-x86-generic
View File

@ -40,6 +40,8 @@ CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_PCDP=y
CONFIG_FB_EFI=y
# needs FB_SIMPLE to work correctly
# CONFIG_X86_SYSFB is not set
# FIXME: 32bit only?
# CONFIG_FB_N411 is not set
@ -254,6 +256,7 @@ CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_KVM_MMU_AUDIT=y # default $x would be nice...
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_XEN=y
# CONFIG_XEN_DEBUG is not set
@ -362,6 +365,9 @@ CONFIG_LPC_ICH=m
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_F7188X is not set
CONFIG_PCI_CNB20LE_QUIRK=y
@ -398,9 +404,6 @@ CONFIG_HP_ACCEL=m
# CONFIG_RAPIDIO is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_SCHED_SMT=y
CONFIG_CC_STACKPROTECTOR=y
CONFIG_RELOCATABLE=y
@ -459,3 +462,5 @@ CONFIG_MODULE_SIG_UEFI=y
CONFIG_VMXNET3=m
CONFIG_VFIO_PCI_VGA=y
# CONFIG_NTB is not set

4
config-x86_64-generic
View File

@ -16,8 +16,10 @@ CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_NUMA_BALANCING=y
CONFIG_NR_CPUS=128
# https://lists.fedoraproject.org/pipermail/kernel/2013-November/004601.html
CONFIG_NR_CPUS=1024
CONFIG_PHYSICAL_START=0x1000000
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set

34
debug-bad-pte-modules.patch
View File

@ -1,34 +0,0 @@
From 3cd4fefa1d614debf75f059def34ac1aaaf96501 Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@redhat.com>
Date: Tue, 30 Apr 2013 14:01:57 -0400
Subject: [PATCH] When we encounter a bad PTE, print out what modules were
loaded, so we can see if there is a common driver potentially at fault.
Signed-off-by: Dave Jones <davej@redhat.com>
---
mm/memory.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/mm/memory.c b/mm/memory.c
index 6dc1882..99564df 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -57,6 +57,7 @@
#include <linux/swapops.h>
#include <linux/elf.h>
#include <linux/gfp.h>
+#include <linux/module.h>
#include <linux/migrate.h>
#include <linux/string.h>
@@ -720,6 +721,7 @@ static void print_bad_pte(struct vm_area_struct *vma, unsigned long addr,
if (vma->vm_file && vma->vm_file->f_op)
printk(KERN_ALERT "vma->vm_file->f_op->mmap: %pSR\n",
vma->vm_file->f_op->mmap);
+ print_modules();
dump_stack();
add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE);
}
--
1.8.1.4

20
drm-i915-hush-check-crtc-state.patch
View File

@ -1,20 +0,0 @@
Bugzilla: 1027037 1028785
Upstream-status: http://lists.freedesktop.org/archives/intel-gfx/2013-November/035948.html
This is _by far_ the most common backtrace for i915 on retrace.fp.o, and
it's mostly useless noise. There's not enough context when it's generated
to know if something actually went wrong. Downgrade the message to
KMS debugging so we can still get it if we want it.
diff -up linux-3.13.0-0.rc0.git2.1.fc21.x86_64/drivers/gpu/drm/i915/intel_display.c.jx linux-3.13.0-0.rc0.git2.1.fc21.x86_64/drivers/gpu/drm/i915/intel_display.c
--- linux-3.13.0-0.rc0.git2.1.fc21.x86_64/drivers/gpu/drm/i915/intel_display.c.jx 2013-11-03 18:41:51.000000000 -0500
+++ linux-3.13.0-0.rc0.git2.1.fc21.x86_64/drivers/gpu/drm/i915/intel_display.c 2013-11-13 10:12:05.781301624 -0500
@@ -8803,7 +8803,7 @@ check_crtc_state(struct drm_device *dev)
if (active &&
!intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
- WARN(1, "pipe state doesn't match!\n");
+ DRM_DEBUG_KMS("pipe state doesn't match!\n");
intel_dump_pipe_config(crtc, &pipe_config,
"[hw state]");
intel_dump_pipe_config(crtc, &crtc->config,

1
drm-intel-next.patch
View File

@ -1 +0,0 @@
empty

13
drm-qxl-backport-fixes-for-Fedora.patch
View File

@ -150,19 +150,6 @@ index 7e96f4f..18c599d 100644
};
/* forward declaration for QXL_INFO_IO */
diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c
index 88722f2..f437b30 100644
--- a/drivers/gpu/drm/qxl/qxl_fb.c
+++ b/drivers/gpu/drm/qxl/qxl_fb.c
@@ -108,7 +108,7 @@ static void qxl_fb_dirty_flush(struct fb_info *info)
u32 x1, x2, y1, y2;
/* TODO: hard coding 32 bpp */
- int stride = qfbdev->qfb.base.pitches[0] * 4;
+ int stride = qfbdev->qfb.base.pitches[0];
x1 = qfbdev->dirty.x1;
x2 = qfbdev->dirty.x2;
diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c
index 9e8da9e..e0ddd5b 100644
--- a/drivers/gpu/drm/qxl/qxl_kms.c

30
drm-qxl-fix-memory-leak-in-release-list-handling.patch
View File

@ -1,30 +0,0 @@
Bugzilla: N/A
Upstream-status: 3.13
From 1b28c3e628315ac0d9ef2d3fac0403f05ae692db Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Thu, 28 Nov 2013 05:39:03 +0000
Subject: drm/qxl: fix memory leak in release list handling
wow no idea how I got this far without seeing this,
leaking the entries in the list makes kmalloc-64 slab grow.
References: https://bugzilla.kernel.org/show_bug.cgi?id=65121
Cc: stable@vger.kernel.org
Reported-by: Matthew Stapleton <matthew4196@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c
index 0109a96..821ab7b 100644
--- a/drivers/gpu/drm/qxl/qxl_release.c
+++ b/drivers/gpu/drm/qxl/qxl_release.c
@@ -92,6 +92,7 @@ qxl_release_free(struct qxl_device *qdev,
- DRM_FILE_OFFSET);
qxl_fence_remove_release(&bo->fence, release->id);
qxl_bo_unref(&bo);
+ kfree(entry);
}
spin_lock(&qdev->release_idr_lock);
idr_remove(&qdev->release_idr, release->id);
--
cgit v0.9.0.2-2-gbebe

173
drm-radeon-24hz-audio-fixes.patch
View File

@ -1,173 +0,0 @@
Bugzilla: 1010679
Upstream-status: 3.13
From 908171aa738b5bbcc6241cec46f73fcd57dd00d4 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <pierre@ossman.eu>
Date: Wed, 6 Nov 2013 20:00:32 +0100
Subject: [PATCH 1/2] drm/radeon/audio: correct ACR table
The values were taken from the HDMI spec, but they assumed
exact x/1.001 clocks. Since we round the clocks, we also need
to calculate different N and CTS values.
Note that the N for 25.2/1.001 MHz at 44.1 kHz audio is out of
spec. Hopefully this mode is rarely used and/or HDMI sinks
tolerate overly large values of N.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 4140fe8..e8ca095 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -57,15 +57,15 @@ enum r600_hdmi_iec_status_bits {
static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = {
/* 32kHz 44.1kHz 48kHz */
/* Clock N CTS N CTS N CTS */
- { 25175, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */
+ { 25175, 4096, 25175, 28224, 125875, 6144, 25175 }, /* 25,20/1.001 MHz */
{ 25200, 4096, 25200, 6272, 28000, 6144, 25200 }, /* 25.20 MHz */
{ 27000, 4096, 27000, 6272, 30000, 6144, 27000 }, /* 27.00 MHz */
{ 27027, 4096, 27027, 6272, 30030, 6144, 27027 }, /* 27.00*1.001 MHz */
{ 54000, 4096, 54000, 6272, 60000, 6144, 54000 }, /* 54.00 MHz */
{ 54054, 4096, 54054, 6272, 60060, 6144, 54054 }, /* 54.00*1.001 MHz */
- { 74176, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */
+ { 74176, 4096, 74176, 5733, 75335, 6144, 74176 }, /* 74.25/1.001 MHz */
{ 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */
- { 148352, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */
+ { 148352, 4096, 148352, 5733, 150670, 6144, 148352 }, /* 148.50/1.001 MHz */
{ 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */
{ 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */
};
--
1.8.3.1
From 05e4776357fe7217e531cbaaa163e24f688d10ce Mon Sep 17 00:00:00 2001
From: Pierre Ossman <pierre@ossman.eu>
Date: Wed, 6 Nov 2013 20:09:08 +0100
Subject: [PATCH 2/2] drm/radeon/audio: improve ACR calculation
In order to have any realistic chance of calculating proper
ACR values, we need to be able to calculate both N and CTS,
not just CTS. We still aim for the ideal N as specified in
the HDMI spec though.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 68 ++++++++++++++++++++++++++------------
1 file changed, 46 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index e8ca095..92c6df7 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -24,6 +24,7 @@
* Authors: Christian König
*/
#include <linux/hdmi.h>
+#include <linux/gcd.h>
#include <drm/drmP.h>
#include <drm/radeon_drm.h>
#include "radeon.h"
@@ -67,25 +68,47 @@ static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = {
{ 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */
{ 148352, 4096, 148352, 5733, 150670, 6144, 148352 }, /* 148.50/1.001 MHz */
{ 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */
- { 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */
};
+
/*
- * calculate CTS value if it's not found in the table
+ * calculate CTS and N values if they are not found in the table
*/
-static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int N, int freq)
+static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int *N, int freq)
{
- u64 n;
- u32 d;
-
- if (*CTS == 0) {
- n = (u64)clock * (u64)N * 1000ULL;
- d = 128 * freq;
- do_div(n, d);
- *CTS = n;
- }
- DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n",
- N, *CTS, freq);
+ int n, cts;
+ unsigned long div, mul;
+
+ /* Safe, but overly large values */
+ n = 128 * freq;
+ cts = clock * 1000;
+
+ /* Smallest valid fraction */
+ div = gcd(n, cts);
+
+ n /= div;
+ cts /= div;
+
+ /*
+ * The optimal N is 128*freq/1000. Calculate the closest larger
+ * value that doesn't truncate any bits.
+ */
+ mul = ((128*freq/1000) + (n-1))/n;
+
+ n *= mul;
+ cts *= mul;
+
+ /* Check that we are in spec (not always possible) */
+ if (n < (128*freq/1500))
+ printk(KERN_WARNING "Calculated ACR N value is too small. You may experience audio problems.\n");
+ if (n > (128*freq/300))
+ printk(KERN_WARNING "Calculated ACR N value is too large. You may experience audio problems.\n");
+
+ *N = n;
+ *CTS = cts;
+
+ DRM_DEBUG("Calculated ACR timing N=%d CTS=%d for frequency %d\n",
+ *N, *CTS, freq);
}
struct radeon_hdmi_acr r600_hdmi_acr(uint32_t clock)
@@ -93,15 +116,16 @@ struct radeon_hdmi_acr r600_hdmi_acr(uint32_t clock)
struct radeon_hdmi_acr res;
u8 i;
- for (i = 0; r600_hdmi_predefined_acr[i].clock != clock &&
- r600_hdmi_predefined_acr[i].clock != 0; i++)
- ;
- res = r600_hdmi_predefined_acr[i];
+ /* Precalculated values for common clocks */
+ for (i = 0; i < ARRAY_SIZE(r600_hdmi_predefined_acr); i++) {
+ if (r600_hdmi_predefined_acr[i].clock == clock)
+ return r600_hdmi_predefined_acr[i];
+ }
- /* In case some CTS are missing */
- r600_hdmi_calc_cts(clock, &res.cts_32khz, res.n_32khz, 32000);
- r600_hdmi_calc_cts(clock, &res.cts_44_1khz, res.n_44_1khz, 44100);
- r600_hdmi_calc_cts(clock, &res.cts_48khz, res.n_48khz, 48000);
+ /* And odd clocks get manually calculated */
+ r600_hdmi_calc_cts(clock, &res.cts_32khz, &res.n_32khz, 32000);
+ r600_hdmi_calc_cts(clock, &res.cts_44_1khz, &res.n_44_1khz, 44100);
+ r600_hdmi_calc_cts(clock, &res.cts_48khz, &res.n_48khz, 48000);
return res;
}
--
1.8.3.1

162
elevator-Fix-a-race-in-elevator-switching-and-md.patch
View File

@ -1,162 +0,0 @@
Delivered-To: jwboyer@gmail.com
Received: by 10.76.168.104 with SMTP id zv8csp55663oab;
Fri, 30 Aug 2013 15:52:46 -0700 (PDT)
X-Received: by 10.68.244.168 with SMTP id xh8mr12419215pbc.3.1377903166373;
Fri, 30 Aug 2013 15:52:46 -0700 (PDT)
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67])
by mx.google.com with ESMTP id qc9si280431pac.269.1969.12.31.16.00.00;
Fri, 30 Aug 2013 15:52:46 -0700 (PDT)
Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Authentication-Results: mx.google.com;
spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mail=linux-kernel-owner@vger.kernel.org;
dkim=neutral (bad format) header.i=@hds.com
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
id S1753535Ab3H3WrV (ORCPT <rfc822;georgezhim@gmail.com>
+ 99 others); Fri, 30 Aug 2013 18:47:21 -0400
Received: from usindpps04.hds.com ([207.126.252.17]:35636 "EHLO
usindpps04.hds.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
with ESMTP id S1752650Ab3H3WrU (ORCPT
<rfc822;linux-kernel@vger.kernel.org>);
Fri, 30 Aug 2013 18:47:20 -0400
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=hds.com; h=subject : to : from : cc
: date : message-id : mime-version : content-type :
content-transfer-encoding; s=mail1;
bh=VofHN8IMnygn2hbqnFjLmX0PPEPbvpzE377u1RxpGOY=;
b=piW6J78W57qDXBPJJuodWw/tvf0T//JbxKX6sLPvpuaOG2nBLMHzDqUeTYwFEQqUvdmf
ZTkiwsKi0WEku3MKcxJ7veR7wvTZcQ4fGMETFTf1c2J/1JOKpXLnft4ERuW89/FAxw25
wQM1ulsuQ3Cncl0I/sIaqMlaMOtvuQ/C8rsHorp+75eFiL6yx1jU5wMbuti4D/NprIET
3r57cPZ0YCh6sLjvOgjay6mKyktMToyjHPx6X1TWCSWcwes33Popc1hpadxUdFI/0npL
mN3Tttbe7e2RcmkXAZbwg8xj+FwSu3nIRC4G9UpFCsMz518C/AWZj4puwWE6VHZWVvVZ Rg==
Received: from usindmail01.hds.com (usindmail03 [207.126.252.22])
by usindpps04.hds.com (8.14.5/8.14.5) with ESMTP id r7UMlBjr025492;
Fri, 30 Aug 2013 18:47:11 -0400
Received: from hds.com (usindnetf5d-vlan47float.corp.hds.com [10.74.73.11])
by usindmail01.hds.com (8.14.1/8.14.1) with ESMTP id r7UMl8SG058466;
Fri, 30 Aug 2013 18:47:10 -0400 (EDT)
Subject: [PATCH v2 1/2] elevator: Fix a race in elevator switching and md
device initialization
To: linux-kernel@vger.kernel.org
From: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Cc: axboe@kernel.dk, tj@kernel.org, seiji.aguchi@hds.com,
vgoyal@redhat.com, majianpeng@gmail.com
Date: Fri, 30 Aug 2013 18:47:07 -0400
Message-ID: <20130830224707.21812.63516.stgit@hds.com>
User-Agent: StGit/0.16
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
X-Proofpoint-SPF-Result: pass
X-Proofpoint-SPF-Record: v=spf1 mx ip4:207.126.244.0/26 ip4:207.126.252.0/25 include:mktomail.com
include:cloud.hds.com ~all
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.10.8794,1.0.431,0.0.0000
definitions=2013-08-30_09:2013-08-30,2013-08-30,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=outbound_policy score=0 spamscore=0 suspectscore=1
phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx
scancount=1 engine=7.0.1-1305240000 definitions=main-1308300162
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
The soft lockup below happens at the boot time of the system using dm
multipath and the udev rules to switch scheduler.
[ 356.127001] BUG: soft lockup - CPU#3 stuck for 22s! [sh:483]
[ 356.127001] RIP: 0010:[<ffffffff81072a7d>] [<ffffffff81072a7d>] lock_timer_base.isra.35+0x1d/0x50
...
[ 356.127001] Call Trace:
[ 356.127001] [<ffffffff81073810>] try_to_del_timer_sync+0x20/0x70
[ 356.127001] [<ffffffff8118b08a>] ? kmem_cache_alloc_node_trace+0x20a/0x230
[ 356.127001] [<ffffffff810738b2>] del_timer_sync+0x52/0x60
[ 356.127001] [<ffffffff812ece22>] cfq_exit_queue+0x32/0xf0
[ 356.127001] [<ffffffff812c98df>] elevator_exit+0x2f/0x50
[ 356.127001] [<ffffffff812c9f21>] elevator_change+0xf1/0x1c0
[ 356.127001] [<ffffffff812caa50>] elv_iosched_store+0x20/0x50
[ 356.127001] [<ffffffff812d1d09>] queue_attr_store+0x59/0xb0
[ 356.127001] [<ffffffff812143f6>] sysfs_write_file+0xc6/0x140
[ 356.127001] [<ffffffff811a326d>] vfs_write+0xbd/0x1e0
[ 356.127001] [<ffffffff811a3ca9>] SyS_write+0x49/0xa0
[ 356.127001] [<ffffffff8164e899>] system_call_fastpath+0x16/0x1b
This is caused by a race between md device initialization by multipathd and
shell script to switch the scheduler using sysfs.
- multipathd:
SyS_ioctl -> do_vfs_ioctl -> dm_ctl_ioctl -> ctl_ioctl -> table_load
-> dm_setup_md_queue -> blk_init_allocated_queue -> elevator_init
q->elevator = elevator_alloc(q, e); // not yet initialized
- sh -c 'echo deadline > /sys/$DEVPATH/queue/scheduler':
elevator_switch (in the call trace above)
struct elevator_queue *old = q->elevator;
q->elevator = elevator_alloc(q, new_e);
elevator_exit(old); // lockup! (*)
- multipathd: (cont.)
err = e->ops.elevator_init_fn(q); // init fails; q->elevator is modified
(*) When del_timer_sync() is called, lock_timer_base() will loop infinitely
while timer->base == NULL. In this case, as timer will never initialized,
it results in lockup.
This patch introduces acquisition of q->sysfs_lock around elevator_init()
into blk_init_allocated_queue(), to provide mutual exclusion between
initialization of the q->scheduler and switching of the scheduler.
This should fix this bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=902012
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
---
block/blk-core.c | 10 +++++++++-
block/elevator.c | 6 ++++++
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 93a18d1..2f6275f 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -739,9 +739,17 @@ blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
q->sg_reserved_size = INT_MAX;
+ /* Protect q->elevator from elevator_change */
+ mutex_lock(&q->sysfs_lock);
+
/* init elevator */
- if (elevator_init(q, NULL))
+ if (elevator_init(q, NULL)) {
+ mutex_unlock(&q->sysfs_lock);
return NULL;
+ }
+
+ mutex_unlock(&q->sysfs_lock);
+
return q;
}
EXPORT_SYMBOL(blk_init_allocated_queue);
diff --git a/block/elevator.c b/block/elevator.c
index 668394d..02d4390 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -186,6 +186,12 @@ int elevator_init(struct request_queue *q, char *name)
struct elevator_type *e = NULL;
int err;
+ /*
+ * q->sysfs_lock must be held to provide mutual exclusion between
+ * elevator_switch() and here.
+ */
+ lockdep_assert_held(&q->sysfs_lock);
+
if (unlikely(q->elevator))
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

121
elevator-acquire-q-sysfs_lock-in-elevator_change.patch
View File

@ -1,121 +0,0 @@
Delivered-To: jwboyer@gmail.com
Received: by 10.76.168.104 with SMTP id zv8csp55623oab;
Fri, 30 Aug 2013 15:51:42 -0700 (PDT)
X-Received: by 10.67.30.70 with SMTP id kc6mr13149193pad.32.1377903101609;
Fri, 30 Aug 2013 15:51:41 -0700 (PDT)
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67])
by mx.google.com with ESMTP id gg2si304840pac.217.1969.12.31.16.00.00;
Fri, 30 Aug 2013 15:51:41 -0700 (PDT)
Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Authentication-Results: mx.google.com;
spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mail=linux-kernel-owner@vger.kernel.org;
dkim=neutral (bad format) header.i=@hds.com
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
id S1756106Ab3H3WrX (ORCPT <rfc822;georgezhim@gmail.com>
+ 99 others); Fri, 30 Aug 2013 18:47:23 -0400
Received: from usindpps04.hds.com ([207.126.252.17]:35640 "EHLO
usindpps04.hds.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
with ESMTP id S1752650Ab3H3WrW (ORCPT
<rfc822;linux-kernel@vger.kernel.org>);
Fri, 30 Aug 2013 18:47:22 -0400
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=hds.com; h=subject : to : from : cc
: date : message-id : in-reply-to : references : mime-version :
content-type : content-transfer-encoding; s=mail1;
bh=xbQuWVaSJrPfWG5E7bXFAbOFjf/sBaRZsPmpVgy0CYk=;
b=NW/A8Imu32MXoBi5FLrQ0FsK66RTWMQo1bFRtgQplVEQQIAXyf1XhCaAZyTkTplc0iEx
ovyGZHvLbmGL6w3I3pxkCFz1BPJCqoZtvQITir/WvfzyadYOK1cz+vuBUQSCmfkacvS/
w37h1jLAjsvWXkl0GY7pxB9HJMXdeLnhhuWxtNU8m8rKZ7t3LSByMeQi5/3OTkNojDEe
70cKeZXCPQ/UIDJAF4cpSVXia5FwoJISjXvQIrvqkYhFelzq3OHMcC482PdpqNB475h3
yHHJ83HFOLRulUQdOG5ZVTB9qRg0zxRx/oedeXwzturFke68noRRa4f4izQ8sCwsWOCI Dw==
Received: from usindmail01.hds.com (usindmail03 [207.126.252.22])
by usindpps04.hds.com (8.14.5/8.14.5) with ESMTP id r7UMlHIc025543;
Fri, 30 Aug 2013 18:47:17 -0400
Received: from hds.com (usindnetf5d-vlan47float.corp.hds.com [10.74.73.11])
by usindmail01.hds.com (8.14.1/8.14.1) with ESMTP id r7UMlGiC058545;
Fri, 30 Aug 2013 18:47:17 -0400 (EDT)
Subject: [PATCH v2 2/2] elevator: acquire q->sysfs_lock in elevator_change()
To: linux-kernel@vger.kernel.org
From: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Cc: axboe@kernel.dk, tj@kernel.org, seiji.aguchi@hds.com,
vgoyal@redhat.com, majianpeng@gmail.com
Date: Fri, 30 Aug 2013 18:47:16 -0400
Message-ID: <20130830224716.21812.99333.stgit@hds.com>
In-Reply-To: <20130830224707.21812.63516.stgit@hds.com>
References: <20130830224707.21812.63516.stgit@hds.com>
User-Agent: StGit/0.16
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
X-Proofpoint-SPF-Result: pass
X-Proofpoint-SPF-Record: v=spf1 mx ip4:207.126.244.0/26 ip4:207.126.252.0/25 include:mktomail.com
include:cloud.hds.com ~all
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.10.8794,1.0.431,0.0.0000
definitions=2013-08-30_09:2013-08-30,2013-08-30,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=outbound_policy score=0 spamscore=0 suspectscore=1
phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx
scancount=1 engine=7.0.1-1305240000 definitions=main-1308300162
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Add locking of q->sysfs_lock into elevator_change() (an exported function)
to ensure it is held to protect q->elevator from elevator_init(), even if
elevator_change() is called from non-sysfs paths.
sysfs path (elv_iosched_store) uses __elevator_change(), non-locking
version, as the lock is already taken by elv_iosched_store().
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
---
block/elevator.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/block/elevator.c b/block/elevator.c
index 02d4390..6d765f7 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -965,7 +965,7 @@ fail_init:
/*
* Switch this queue to the given IO scheduler.
*/
-int elevator_change(struct request_queue *q, const char *name)
+static int __elevator_change(struct request_queue *q, const char *name)
{
char elevator_name[ELV_NAME_MAX];
struct elevator_type *e;
@@ -987,6 +987,18 @@ int elevator_change(struct request_queue *q, const char *name)
return elevator_switch(q, e);
}
+
+int elevator_change(struct request_queue *q, const char *name)
+{
+ int ret;
+
+ /* Protect q->elevator from elevator_init() */
+ mutex_lock(&q->sysfs_lock);
+ ret = __elevator_change(q, name);
+ mutex_unlock(&q->sysfs_lock);
+
+ return ret;
+}
EXPORT_SYMBOL(elevator_change);
ssize_t elv_iosched_store(struct request_queue *q, const char *name,
@@ -997,7 +1009,7 @@ ssize_t elv_iosched_store(struct request_queue *q, const char *name,
if (!q->elevator)
return count;
- ret = elevator_change(q, name);
+ ret = __elevator_change(q, name);
if (!ret)
return count;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

76
fix-child-thread-introspection.patch
View File

@ -1,76 +0,0 @@
Allow threads other than the main thread to do introspection of files in
proc without relying on read permissions. proc_pid_follow_link() calls
proc_fd_access_allowed() which ultimately calls __ptrace_may_access().
Though this allows additional access to some proc files, we do not
believe that this has any unintended security implications. However it
probably needs to be looked at carefully.
The original problem was a thread of a process whose permissions were
111 couldn't open its own /proc/self/exe This was interfering with a
special purpose debugging tool. A simple reproducer is below.:
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <errno.h>
#include <stdlib.h>
#include <sys/types.h>
#define BUFSIZE 2048
void *thread_main(void *arg){
char *str=(char*)arg;
char buf[BUFSIZE];
ssize_t len=readlink("/proc/self/exe", buf, BUFSIZE);
if(len==-1)
printf("/proc/self/exe in %s: %s\n", str,sys_errlist[errno]);
else
printf("/proc/self/exe in %s: OK\n", str);
return 0;
}
int main(){
pthread_t thread;
int retval=pthread_create( &thread, NULL, thread_main, "thread");
if(retval!=0)
exit(1);
thread_main("main");
pthread_join(thread, NULL);
exit(0);
}
Signed-off-by: Ben Woodard <woodard@redhat.com>
Signed-off-by: Mark Grondona <mgrondona@llnl.gov>
---
kernel/ptrace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index acbd284..347c4c7 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
diff -ruNp linux-3.8.4-103.fc17.noarch/kernel/ptrace.c linux-3.8.4-103.fc17.ptrace/kernel/ptrace.c
--- linux-3.8.4-103.fc17.noarch/kernel/ptrace.c 2013-02-18 17:58:34.000000000 -0600
+++ linux-3.8.4-103.fc17.ptrace/kernel/ptrace.c 2013-03-26 14:59:01.939396346 -0500
@@ -234,7 +234,7 @@ static int __ptrace_may_access(struct ta
*/
int dumpable = 0;
/* Don't let security modules deny introspection */
- if (task == current)
+ if (same_thread_group(task, current))
return 0;
rcu_read_lock();
tcred = __task_cred(task);
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

154
fix-radeon-sound.patch
View File

@ -1,154 +0,0 @@
From 062c2e4363451d49ef840232fe65e8bff0dde2a5 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Fri, 27 Sep 2013 18:09:54 -0400
Subject: [PATCH 1/4] drm/radeon: use 64-bit math to calculate CTS values for
audio (v2)
Avoid losing precision. See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675
v2: fix math as per Anssi's comments.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index b0fa600..49043a5 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -75,8 +75,15 @@ static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = {
*/
static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int N, int freq)
{
- if (*CTS == 0)
- *CTS = clock * N / (128 * freq) * 1000;
+ u64 n;
+ u32 d;
+
+ if (*CTS == 0) {
+ n = (u64)clock * (u64)N * 1000ULL;
+ d = 128 * freq;
+ do_div(n, d);
+ *CTS = n;
+ }
DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n",
N, *CTS, freq);
}
--
1.8.3.1
From e7d12c2f98ae1e68c7298e5028048d150fa553a1 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Fri, 27 Sep 2013 18:19:42 -0400
Subject: [PATCH 2/4] drm/radeon: fix N/CTS clock matching for audio
The drm code that calculates the 1001 clocks rounds up
rather than truncating. This allows the table to match
properly on those modes.
See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 49043a5..567703f 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -57,15 +57,15 @@ enum r600_hdmi_iec_status_bits {
static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = {
/* 32kHz 44.1kHz 48kHz */
/* Clock N CTS N CTS N CTS */
- { 25174, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */
+ { 25175, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */
{ 25200, 4096, 25200, 6272, 28000, 6144, 25200 }, /* 25.20 MHz */
{ 27000, 4096, 27000, 6272, 30000, 6144, 27000 }, /* 27.00 MHz */
{ 27027, 4096, 27027, 6272, 30030, 6144, 27027 }, /* 27.00*1.001 MHz */
{ 54000, 4096, 54000, 6272, 60000, 6144, 54000 }, /* 54.00 MHz */
{ 54054, 4096, 54054, 6272, 60060, 6144, 54054 }, /* 54.00*1.001 MHz */
- { 74175, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */
+ { 74176, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */
{ 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */
- { 148351, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */
+ { 148352, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */
{ 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */
{ 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */
};
--
1.8.3.1
From ee0fec312a1c4e26f255955da942562cd8908a4b Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Fri, 27 Sep 2013 18:22:15 -0400
Subject: [PATCH 3/4] drm/radeon: use hw generated CTS/N values for audio
Use the hw generated values rather than calculating
them in the driver. There may be some older r6xx
asics where this doesn't work correctly. This remains
to be seen.
See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 567703f..e2ae1c2 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -451,8 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
}
WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
- HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */
- HDMI0_ACR_SOURCE); /* select SW CTS value */
+ HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
HDMI0_NULL_SEND | /* send null packets when required */
--
1.8.3.1
From b852c985010a77c850b7548d64bbb964ca462b02 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Thu, 10 Oct 2013 11:47:01 -0400
Subject: [PATCH 4/4] drm/radeon: re-enable sw ACR support on pre-DCE4
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
HW ACR support may have issues on some older chips, so
use SW ACR for now until we've tested further.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: Rafał Miłecki <zajec5@gmail.com>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index e2ae1c2..5b72931 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -451,6 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
}
WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
+ HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */
HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
--
1.8.3.1

253
inet-fix-addr_len-msg_namelen-assignment-in-recv_error-and-rxpmtu-functions.patch
View File

@ -1,253 +0,0 @@
Bugzilla: 1035887
Upstream-status: 3.13
From 4be402ba6158068d53ab0268f1affa9d82dae2ec Mon Sep 17 00:00:00 2001
From: Hannes Frederic Sowa <hannes@stressinduktion.org>
Date: Fri, 22 Nov 2013 23:46:12 +0000
Subject: [PATCH] inet: fix addr_len/msg->msg_namelen assignment in recv_error
and rxpmtu functions
Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage
of uninitialized memory to user in recv syscalls") conditionally updated
addr_len if the msg_name is written to. The recv_error and rxpmtu
functions relied on the recvmsg functions to set up addr_len before.
As this does not happen any more we have to pass addr_len to those
functions as well and set it to the size of the corresponding sockaddr
length.
This broke traceroute and such.
Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
Reported-by: Brad Spengler <spender@grsecurity.net>
Reported-by: Tom Labanowski
Cc: mpb <mpb.mail@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/net/ip.h | 2 +-
include/net/ipv6.h | 4 ++--
include/net/ping.h | 3 ++-
net/ipv4/ip_sockglue.c | 3 ++-
net/ipv4/ping.c | 5 +++--
net/ipv4/raw.c | 2 +-
net/ipv4/udp.c | 2 +-
net/ipv6/datagram.c | 7 +++++--
net/ipv6/ping.c | 3 ++-
net/ipv6/raw.c | 4 ++--
net/ipv6/udp.c | 4 ++--
net/l2tp/l2tp_ip6.c | 2 +-
12 files changed, 24 insertions(+), 17 deletions(-)
diff --git a/include/net/ip.h b/include/net/ip.h
index 5e52688..301f10c 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -464,7 +464,7 @@ extern int compat_ip_getsockopt(struct sock *sk, int level,
int optname, char __user *optval, int __user *optlen);
extern int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *));
-extern int ip_recv_error(struct sock *sk, struct msghdr *msg, int len);
+extern int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len);
extern void ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err,
__be16 port, u32 info, u8 *payload);
extern void ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 dport,
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index bbf1c8f..5529d79 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -802,8 +802,8 @@ extern int compat_ipv6_getsockopt(struct sock *sk,
extern int ip6_datagram_connect(struct sock *sk,
struct sockaddr *addr, int addr_len);
-extern int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len);
-extern int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len);
+extern int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len);
+extern int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len, int *addr_len);
extern void ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port,
u32 info, u8 *payload);
extern void ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info);
diff --git a/include/net/ping.h b/include/net/ping.h
index 5db0224..2b496e9 100644
--- a/include/net/ping.h
+++ b/include/net/ping.h
@@ -31,7 +31,8 @@
/* Compatibility glue so we can support IPv6 when it's compiled as a module */
struct pingv6_ops {
- int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len);
+ int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len);
int (*ip6_datagram_recv_ctl)(struct sock *sk, struct msghdr *msg,
struct sk_buff *skb);
int (*icmpv6_err_convert)(u8 type, u8 code, int *err);
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index d9c4f11..23e6ab0 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -368,7 +368,7 @@ void ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 port, u32 inf
/*
* Handle MSG_ERRQUEUE
*/
-int ip_recv_error(struct sock *sk, struct msghdr *msg, int len)
+int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
{
struct sock_exterr_skb *serr;
struct sk_buff *skb, *skb2;
@@ -405,6 +405,7 @@ int ip_recv_error(struct sock *sk, struct msghdr *msg, int len)
serr->addr_offset);
sin->sin_port = serr->port;
memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
+ *addr_len = sizeof(*sin);
}
memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 92fb6ff..ac31877 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -838,10 +838,11 @@ int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
if (flags & MSG_ERRQUEUE) {
if (family == AF_INET) {
- return ip_recv_error(sk, msg, len);
+ return ip_recv_error(sk, msg, len, addr_len);
#if IS_ENABLED(CONFIG_IPV6)
} else if (family == AF_INET6) {
- return pingv6_ops.ipv6_recv_error(sk, msg, len);
+ return pingv6_ops.ipv6_recv_error(sk, msg, len,
+ addr_len);
#endif
}
}
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index ca4c3f1..7d3db78 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -695,7 +695,7 @@ static int raw_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
goto out;
if (flags & MSG_ERRQUEUE) {
- err = ip_recv_error(sk, msg, len);
+ err = ip_recv_error(sk, msg, len, addr_len);
goto out;
}
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index a7003de..1ef8794 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1210,7 +1210,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
bool slow;
if (flags & MSG_ERRQUEUE)
- return ip_recv_error(sk, msg, len);
+ return ip_recv_error(sk, msg, len, addr_len);
try_again:
skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0),
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 48b6bd2..7a0fd80 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -318,7 +318,7 @@ void ipv6_local_rxpmtu(struct sock *sk, struct flowi6 *fl6, u32 mtu)
/*
* Handle MSG_ERRQUEUE
*/
-int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len)
+int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct sock_exterr_skb *serr;
@@ -369,6 +369,7 @@ int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len)
&sin->sin6_addr);
sin->sin6_scope_id = 0;
}
+ *addr_len = sizeof(*sin);
}
memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
@@ -423,7 +424,8 @@ EXPORT_SYMBOL_GPL(ipv6_recv_error);
/*
* Handle IPV6_RECVPATHMTU
*/
-int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len)
+int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct sk_buff *skb;
@@ -457,6 +459,7 @@ int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len)
sin->sin6_port = 0;
sin->sin6_scope_id = mtu_info.ip6m_addr.sin6_scope_id;
sin->sin6_addr = mtu_info.ip6m_addr.sin6_addr;
+ *addr_len = sizeof(*sin);
}
put_cmsg(msg, SOL_IPV6, IPV6_PATHMTU, sizeof(mtu_info), &mtu_info);
diff --git a/net/ipv6/ping.c b/net/ipv6/ping.c
index 18f19df..7856e96 100644
--- a/net/ipv6/ping.c
+++ b/net/ipv6/ping.c
@@ -57,7 +57,8 @@ static struct inet_protosw pingv6_protosw = {
/* Compatibility glue so we can support IPv6 when it's compiled as a module */
-static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len)
+static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len)
{
return -EAFNOSUPPORT;
}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 2f303bf..430067c 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -467,10 +467,10 @@ static int rawv6_recvmsg(struct kiocb *iocb, struct sock *sk,
return -EOPNOTSUPP;
if (flags & MSG_ERRQUEUE)
- return ipv6_recv_error(sk, msg, len);
+ return ipv6_recv_error(sk, msg, len, addr_len);
if (np->rxpmtu && np->rxopt.bits.rxpmtu)
- return ipv6_recv_rxpmtu(sk, msg, len);
+ return ipv6_recv_rxpmtu(sk, msg, len, addr_len);
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index a59beed..3d2758d 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -375,10 +375,10 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk,
bool slow;
if (flags & MSG_ERRQUEUE)
- return ipv6_recv_error(sk, msg, len);
+ return ipv6_recv_error(sk, msg, len, addr_len);
if (np->rxpmtu && np->rxopt.bits.rxpmtu)
- return ipv6_recv_rxpmtu(sk, msg, len);
+ return ipv6_recv_rxpmtu(sk, msg, len, addr_len);
try_again:
skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0),
diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
index b8a6039..e6e8408 100644
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -665,7 +665,7 @@ static int l2tp_ip6_recvmsg(struct kiocb *iocb, struct sock *sk,
*addr_len = sizeof(*lsa);
if (flags & MSG_ERRQUEUE)
- return ipv6_recv_error(sk, msg, len);
+ return ipv6_recv_error(sk, msg, len, addr_len);
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
--
1.8.3.1

256
inet-prevent-leakage-of-uninitialized-memory-to-user.patch
View File

@ -1,256 +0,0 @@
Bugzilla: 1035887
Upstream-status: 3.13
From bceaa90240b6019ed73b49965eac7d167610be69 Mon Sep 17 00:00:00 2001
From: Hannes Frederic Sowa <hannes@stressinduktion.org>
Date: Mon, 18 Nov 2013 04:20:45 +0100
Subject: [PATCH] inet: prevent leakage of uninitialized memory to user in recv
syscalls
Only update *addr_len when we actually fill in sockaddr, otherwise we
can return uninitialized memory from the stack to the caller in the
recvfrom, recvmmsg and recvmsg syscalls. Drop the the (addr_len == NULL)
checks because we only get called with a valid addr_len pointer either
from sock_common_recvmsg or inet_recvmsg.
If a blocking read waits on a socket which is concurrently shut down we
now return zero and set msg_msgnamelen to 0.
Reported-by: mpb <mpb.mail@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
net/ieee802154/dgram.c | 3 +--
net/ipv4/ping.c | 19 +++++++------------
net/ipv4/raw.c | 4 +---
net/ipv4/udp.c | 7 +------
net/ipv6/raw.c | 4 +---
net/ipv6/udp.c | 5 +----
net/l2tp/l2tp_ip.c | 4 +---
net/phonet/datagram.c | 9 ++++-----
8 files changed, 17 insertions(+), 38 deletions(-)
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index 581a595..1865fdf 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -315,9 +315,8 @@ static int dgram_recvmsg(struct kiocb *iocb, struct sock *sk,
if (saddr) {
saddr->family = AF_IEEE802154;
saddr->addr = mac_cb(skb)->sa;
- }
- if (addr_len)
*addr_len = sizeof(*saddr);
+ }
if (flags & MSG_TRUNC)
copied = skb->len;
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 9afbdb1..aacefa0 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -830,8 +830,6 @@ int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
{
struct inet_sock *isk = inet_sk(sk);
int family = sk->sk_family;
- struct sockaddr_in *sin;
- struct sockaddr_in6 *sin6;
struct sk_buff *skb;
int copied, err;
@@ -841,13 +839,6 @@ int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
if (flags & MSG_OOB)
goto out;
- if (addr_len) {
- if (family == AF_INET)
- *addr_len = sizeof(*sin);
- else if (family == AF_INET6 && addr_len)
- *addr_len = sizeof(*sin6);
- }
-
if (flags & MSG_ERRQUEUE) {
if (family == AF_INET) {
return ip_recv_error(sk, msg, len);
@@ -877,11 +868,13 @@ int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
/* Copy the address and add cmsg data. */
if (family == AF_INET) {
- sin = (struct sockaddr_in *) msg->msg_name;
+ struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
+
sin->sin_family = AF_INET;
sin->sin_port = 0 /* skb->h.uh->source */;
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+ *addr_len = sizeof(*sin);
if (isk->cmsg_flags)
ip_cmsg_recv(msg, skb);
@@ -890,17 +883,19 @@ int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
} else if (family == AF_INET6) {
struct ipv6_pinfo *np = inet6_sk(sk);
struct ipv6hdr *ip6 = ipv6_hdr(skb);
- sin6 = (struct sockaddr_in6 *) msg->msg_name;
+ struct sockaddr_in6 *sin6 =
+ (struct sockaddr_in6 *)msg->msg_name;
+
sin6->sin6_family = AF_INET6;
sin6->sin6_port = 0;
sin6->sin6_addr = ip6->saddr;
-
sin6->sin6_flowinfo = 0;
if (np->sndflow)
sin6->sin6_flowinfo = ip6_flowinfo(ip6);
sin6->sin6_scope_id = ipv6_iface_scope_id(&sin6->sin6_addr,
IP6CB(skb)->iif);
+ *addr_len = sizeof(*sin6);
if (inet6_sk(sk)->rxopt.all)
pingv6_ops.ip6_datagram_recv_ctl(sk, msg, skb);
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 41e1d28..5cb8ddb 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -696,9 +696,6 @@ static int raw_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
if (flags & MSG_OOB)
goto out;
- if (addr_len)
- *addr_len = sizeof(*sin);
-
if (flags & MSG_ERRQUEUE) {
err = ip_recv_error(sk, msg, len);
goto out;
@@ -726,6 +723,7 @@ static int raw_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
sin->sin_port = 0;
memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
+ *addr_len = sizeof(*sin);
}
if (inet->cmsg_flags)
ip_cmsg_recv(msg, skb);
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 89909dd..998431c 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1235,12 +1235,6 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
int is_udplite = IS_UDPLITE(sk);
bool slow;
- /*
- * Check any passed addresses
- */
- if (addr_len)
- *addr_len = sizeof(*sin);
-
if (flags & MSG_ERRQUEUE)
return ip_recv_error(sk, msg, len);
@@ -1302,6 +1296,7 @@ try_again:
sin->sin_port = udp_hdr(skb)->source;
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+ *addr_len = sizeof(*sin);
}
if (inet->cmsg_flags)
ip_cmsg_recv(msg, skb);
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 3c00842..e24ff1d 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -465,9 +465,6 @@ static int rawv6_recvmsg(struct kiocb *iocb, struct sock *sk,
if (flags & MSG_OOB)
return -EOPNOTSUPP;
- if (addr_len)
- *addr_len=sizeof(*sin6);
-
if (flags & MSG_ERRQUEUE)
return ipv6_recv_error(sk, msg, len);
@@ -506,6 +503,7 @@ static int rawv6_recvmsg(struct kiocb *iocb, struct sock *sk,
sin6->sin6_flowinfo = 0;
sin6->sin6_scope_id = ipv6_iface_scope_id(&sin6->sin6_addr,
IP6CB(skb)->iif);
+ *addr_len = sizeof(*sin6);
}
sock_recv_ts_and_drops(msg, sk, skb);
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index f3893e8..81eb8cf 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -392,9 +392,6 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk,
int is_udp4;
bool slow;
- if (addr_len)
- *addr_len = sizeof(struct sockaddr_in6);
-
if (flags & MSG_ERRQUEUE)
return ipv6_recv_error(sk, msg, len);
@@ -480,7 +477,7 @@ try_again:
ipv6_iface_scope_id(&sin6->sin6_addr,
IP6CB(skb)->iif);
}
-
+ *addr_len = sizeof(*sin6);
}
if (is_udp4) {
if (inet->cmsg_flags)
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index 571db8d..da1a1ce 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -518,9 +518,6 @@ static int l2tp_ip_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m
if (flags & MSG_OOB)
goto out;
- if (addr_len)
- *addr_len = sizeof(*sin);
-
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
goto out;
@@ -543,6 +540,7 @@ static int l2tp_ip_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
sin->sin_port = 0;
memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
+ *addr_len = sizeof(*sin);
}
if (inet->cmsg_flags)
ip_cmsg_recv(msg, skb);
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c
index 12c30f3..38946b2 100644
--- a/net/phonet/datagram.c
+++ b/net/phonet/datagram.c
@@ -139,9 +139,6 @@ static int pn_recvmsg(struct kiocb *iocb, struct sock *sk,
MSG_CMSG_COMPAT))
goto out_nofree;
- if (addr_len)
- *addr_len = sizeof(sa);
-
skb = skb_recv_datagram(sk, flags, noblock, &rval);
if (skb == NULL)
goto out_nofree;
@@ -162,8 +159,10 @@ static int pn_recvmsg(struct kiocb *iocb, struct sock *sk,
rval = (flags & MSG_TRUNC) ? skb->len : copylen;
- if (msg->msg_name != NULL)
- memcpy(msg->msg_name, &sa, sizeof(struct sockaddr_pn));
+ if (msg->msg_name != NULL) {
+ memcpy(msg->msg_name, &sa, sizeof(sa));
+ *addr_len = sizeof(sa);
+ }
out:
skb_free_datagram(sk, skb);
--
1.8.3.1

47
iommu-Remove-stack-trace-from-broken-irq-remapping-warning.patch
View File

@ -1,47 +0,0 @@
From 05104a4e8713b27291c7bb49c1e7e68b4e243571 Mon Sep 17 00:00:00 2001
From: Neil Horman <nhorman@tuxdriver.com>
Date: Fri, 27 Sep 2013 16:53:35 +0000
Subject: iommu: Remove stack trace from broken irq remapping warning
The warning for the irq remapping broken check in intel_irq_remapping.c is
pretty pointless. We need the warning, but we know where its comming from, the
stack trace will always be the same, and it needlessly triggers things like
Abrt. This changes the warning to just print a text warning about BIOS being
broken, without the stack trace, then sets the appropriate taint bit. Since we
automatically disable irq remapping, theres no need to contiue making Abrt jump
at this problem
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
---
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index f71673d..b97d70b 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -525,12 +525,13 @@ static int __init intel_irq_remapping_supported(void)
if (disable_irq_remap)
return 0;
if (irq_remap_broken) {
- WARN_TAINT(1, TAINT_FIRMWARE_WORKAROUND,
- "This system BIOS has enabled interrupt remapping\n"
- "on a chipset that contains an erratum making that\n"
- "feature unstable. To maintain system stability\n"
- "interrupt remapping is being disabled. Please\n"
- "contact your BIOS vendor for an update\n");
+ printk(KERN_WARNING
+ "This system BIOS has enabled interrupt remapping\n"
+ "on a chipset that contains an erratum making that\n"
+ "feature unstable. To maintain system stability\n"
+ "interrupt remapping is being disabled. Please\n"
+ "contact your BIOS vendor for an update\n");
+ add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
disable_irq_remap = 1;
return 0;
}
--
cgit v0.9.2

43
ipv6-fix-headroom-calculation-in-udp6_ufo_fragment.patch
View File

@ -1,43 +0,0 @@
Bugzilla: 1030015 1030017
Upstream-status: 3.13
From aeb45260747b0a1bf4d374d5e65298cc254cb4f5 Mon Sep 17 00:00:00 2001
From: Hannes Frederic Sowa <hannes@stressinduktion.org>
Date: Tue, 5 Nov 2013 02:41:27 +0100
Subject: [PATCH] ipv6: fix headroom calculation in udp6_ufo_fragment
Commit 1e2bd517c108816220f262d7954b697af03b5f9c ("udp6: Fix udp
fragmentation for tunnel traffic.") changed the calculation if
there is enough space to include a fragment header in the skb from a
skb->mac_header dervived one to skb_headroom. Because we already peeled
off the skb to transport_header this is wrong. Change this back to check
if we have enough room before the mac_header.
This fixes a panic Saran Neti reported. He used the tbf scheduler which
skb_gso_segments the skb. The offsets get negative and we panic in memcpy
because the skb was erroneously not expanded at the head.
Reported-by: Saran Neti <Saran.Neti@telus.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
net/ipv6/udp_offload.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c
index 5d1b8d7..657914b 100644
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -86,7 +86,7 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
/* Check if there is enough headroom to insert fragment header. */
tnl_hlen = skb_tnl_header_len(skb);
- if (skb_headroom(skb) < (tnl_hlen + frag_hdr_sz)) {
+ if (skb->mac_header < (tnl_hlen + frag_hdr_sz)) {
if (gso_pskb_expand_head(skb, tnl_hlen + frag_hdr_sz))
goto out;
}
--
1.8.3.1

97
iwl3945-better-skb-management-in-rx-path.patch
View File

@ -1,97 +0,0 @@
From: Eric Dumazet <edumazet@google.com>
Steinar reported reallocations of skb->head with IPv6, leading to
a warning in skb_try_coalesce()
It turns out iwl3945 has several problems :
1) skb->truesize is underestimated.
We really consume PAGE_SIZE bytes for a fragment,
not the frame length.
2) 128 bytes of initial headroom is a bit low and forces reallocations.
3) We can avoid consuming a full page for small enough frames.
Reported-by: Steinar H. Gunderson <sesse@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul Stewart <pstew@google.com>
---
v3: use regular memcpy(skb_put(...),...)
v2: SMALL_PACKET_SIZE define
drivers/net/wireless/iwlegacy/3945.c | 31 +++++++++++++++----------
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c
index c092033..f09e257 100644
--- a/drivers/net/wireless/iwlegacy/3945.c
+++ b/drivers/net/wireless/iwlegacy/3945.c
@@ -475,6 +475,8 @@ il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header)
}
}
+#define SMALL_PACKET_SIZE 256
+
static void
il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
struct ieee80211_rx_status *stats)
@@ -483,14 +485,13 @@ il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
- u16 len = le16_to_cpu(rx_hdr->len);
+ u32 len = le16_to_cpu(rx_hdr->len);
struct sk_buff *skb;
__le16 fc = hdr->frame_control;
+ u32 fraglen = PAGE_SIZE << il->hw_params.rx_page_order;
/* We received data from the HW, so stop the watchdog */
- if (unlikely
- (len + IL39_RX_FRAME_SIZE >
- PAGE_SIZE << il->hw_params.rx_page_order)) {
+ if (unlikely(len + IL39_RX_FRAME_SIZE > fraglen)) {
D_DROP("Corruption detected!\n");
return;
}
@@ -506,26 +507,32 @@ il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
D_INFO("Woke queues - frame received on passive channel\n");
}
- skb = dev_alloc_skb(128);
+ skb = dev_alloc_skb(SMALL_PACKET_SIZE);
if (!skb) {
IL_ERR("dev_alloc_skb failed\n");
return;
}
if (!il3945_mod_params.sw_crypto)
- il_set_decrypted_flag(il, (struct ieee80211_hdr *)rxb_addr(rxb),
+ il_set_decrypted_flag(il, (struct ieee80211_hdr *)pkt,
le32_to_cpu(rx_end->status), stats);
- skb_add_rx_frag(skb, 0, rxb->page,
- (void *)rx_hdr->payload - (void *)pkt, len,
- len);
-
+ /* If frame is small enough to fit into skb->head, copy it
+ * and do not consume a full page
+ */
+ if (len <= SMALL_PACKET_SIZE) {
+ memcpy(skb_put(skb, len), rx_hdr->payload, len);
+ } else {
+ skb_add_rx_frag(skb, 0, rxb->page,
+ (void *)rx_hdr->payload - (void *)pkt, len,
+ fraglen);
+ il->alloc_rxb_page--;
+ rxb->page = NULL;
+ }
il_update_stats(il, false, fc, len);
memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
ieee80211_rx(il->hw, skb);
- il->alloc_rxb_page--;
- rxb->page = NULL;
}
#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)

65
iwl4965-better-skb-management-in-rx-path.patch
View File

@ -1,65 +0,0 @@
4965 version of Eric patch "iwl3945: better skb management in rx path".
It fixes several problems :
1) skb->truesize is underestimated.
We really consume PAGE_SIZE bytes for a fragment,
not the frame length.
2) 128 bytes of initial headroom is a bit low and forces reallocations.
3) We can avoid consuming a full page for small enough frames.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/iwlegacy/4965-mac.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index d287fd2..4e5d408 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -574,9 +574,11 @@ il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
return decrypt_out;
}
+#define SMALL_PACKET_SIZE 256
+
static void
il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr,
- u16 len, u32 ampdu_status, struct il_rx_buf *rxb,
+ u32 len, u32 ampdu_status, struct il_rx_buf *rxb,
struct ieee80211_rx_status *stats)
{
struct sk_buff *skb;
@@ -598,21 +600,25 @@ il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr,
il_set_decrypted_flag(il, hdr, ampdu_status, stats))
return;
- skb = dev_alloc_skb(128);
+ skb = dev_alloc_skb(SMALL_PACKET_SIZE);
if (!skb) {
IL_ERR("dev_alloc_skb failed\n");
return;
}
- skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len,
- len);
+ if (len <= SMALL_PACKET_SIZE) {
+ memcpy(skb_put(skb, len), hdr, len);
+ } else {
+ skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb),
+ len, PAGE_SIZE << il->hw_params.rx_page_order);
+ il->alloc_rxb_page--;
+ rxb->page = NULL;
+ }
il_update_stats(il, false, fc, len);
memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
ieee80211_rx(il->hw, skb);
- il->alloc_rxb_page--;
- rxb->page = NULL;
}
/* Called for N_RX (legacy ABG frames), or
--
1.7.11.7

98
iwlwifi-dvm-dont-override-mac80211-queue-setting.patch
View File

@ -1,98 +0,0 @@
From f6b129527ca15bae29ffb9417ddaa1c9d99ffc5d Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 15 Oct 2013 19:04:54 +0000
Subject: iwlwifi: dvm: don't override mac80211's queue setting
Since we set IEEE80211_HW_QUEUE_CONTROL, we can let
mac80211 do the queue assignement and don't need to
override its decisions.
While reassiging the same values is harmless of course,
it triggered a WARNING when iwlwifi and mac80211 came
to different conclusions. This happened when mac80211 set
IEEE80211_TX_CTL_SEND_AFTER_DTIM, but didn't route the
packet to the cab_queue because no stations were asleep.
iwlwifi should not override mac80211's decicions for
offchannel packets and packets to be sent after DTIM,
but it should override mac80211's decision for AMPDUs
since we have a special queue for them. So for AMPDU,
we still override info->hw_queue by the AMPDU queue.
This avoids:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2531 at drivers/net/wireless/iwlwifi/dvm/tx.c:456 iwlagn_tx_skb+0x6c5/0x883()
Modules linked in:
CPU: 0 PID: 2531 Comm: hostapd Not tainted 3.12.0-rc5+ #1
Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013
0000000000000000 0000000000000009 ffffffff8189aa62 0000000000000000
ffffffff8105a4f2 ffff880058339a48 ffffffff815f8a04 0000000000000000
ffff8800560097b0 0000000000000208 0000000000000000 ffff8800561a9e5e
Call Trace:
[<ffffffff8189aa62>] ? dump_stack+0x41/0x51
[<ffffffff8105a4f2>] ? warn_slowpath_common+0x78/0x90
[<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883
[<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883
[<ffffffff818a0040>] ? put_cred+0x15/0x15
[<ffffffff815f6db4>] ? iwlagn_mac_tx+0x19/0x2f
[<ffffffff8186cc45>] ? __ieee80211_tx+0x226/0x29b
[<ffffffff8186e6bd>] ? ieee80211_tx+0xa6/0xb5
[<ffffffff8186e98b>] ? ieee80211_monitor_start_xmit+0x1e9/0x204
[<ffffffff8171ce5f>] ? dev_hard_start_xmit+0x271/0x3ec
[<ffffffff817351ac>] ? sch_direct_xmit+0x66/0x164
[<ffffffff8171d1bf>] ? dev_queue_xmit+0x1e5/0x3c8
[<ffffffff817fac5a>] ? packet_sendmsg+0xac5/0xb3d
[<ffffffff81709a09>] ? sock_sendmsg+0x37/0x52
[<ffffffff810f9e0c>] ? __do_fault+0x338/0x36b
[<ffffffff81713820>] ? verify_iovec+0x44/0x94
[<ffffffff81709e63>] ? ___sys_sendmsg+0x1f1/0x283
[<ffffffff81140a73>] ? __inode_wait_for_writeback+0x67/0xae
[<ffffffff8111735e>] ? __cache_free.isra.46+0x178/0x187
[<ffffffff811173b1>] ? kmem_cache_free+0x44/0x84
[<ffffffff81132c22>] ? dentry_kill+0x13d/0x149
[<ffffffff81132f6f>] ? dput+0xe5/0xef
[<ffffffff81136e04>] ? fget_light+0x2e/0x7c
[<ffffffff8170ae62>] ? __sys_sendmsg+0x39/0x57
[<ffffffff818a7e39>] ? system_call_fastpath+0x16/0x1b
---[ end trace 1b3eb79359c1d1e6 ]---
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
index da442b8..1fef524 100644
--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -433,27 +433,19 @@ int iwlagn_tx_skb(struct iwl_priv *priv,
/* Copy MAC header from skb into command buffer */
memcpy(tx_cmd->hdr, hdr, hdr_len);
+ txq_id = info->hw_queue;
+
if (is_agg)
txq_id = priv->tid_data[sta_id][tid].agg.txq_id;
else if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
/*
- * Send this frame after DTIM -- there's a special queue
- * reserved for this for contexts that support AP mode.
- */
- txq_id = ctx->mcast_queue;
-
- /*
* The microcode will clear the more data
* bit in the last frame it transmits.
*/
hdr->frame_control |=
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
- } else if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN)
- txq_id = IWL_AUX_QUEUE;
- else
- txq_id = ctx->ac_to_queue[skb_get_queue_mapping(skb)];
+ }
- WARN_ON_ONCE(!is_agg && txq_id != info->hw_queue);
WARN_ON_ONCE(is_agg &&
priv->queue_to_mac80211[txq_id] != info->hw_queue);
--
cgit v0.9.2

248
kernel.spec
View File

@ -62,19 +62,19 @@ Summary: The Linux kernel
# For non-released -rc kernels, this will be appended after the rcX and
# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3"
#
%global baserelease 301
%global baserelease 300
%global fedora_build %{baserelease}
# base_sublevel is the kernel version we're starting with and patching
# on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base,
# which yields a base_sublevel of 0.
%define base_sublevel 11
%define base_sublevel 12
## If this is a released kernel ##
%if 0%{?released_kernel}
# Do we have a -stable update to apply?
%define stable_update 10
%define stable_update 5
# Is it a -stable RC?
%define stable_rc 0
# Set rpm version accordingly
@ -493,13 +493,13 @@ ExclusiveOS: Linux
#
# List the packages used during the kernel build
#
BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar
BuildRequires: bzip2, xz, findutils, gzip, m4, perl, perl-Carp, make >= 3.78, diffutils, gawk
BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config, hmaccalc
BuildRequires: kmod, patch, bash, sh-utils, tar
BuildRequires: bzip2, xz, findutils, gzip, m4, perl, perl-Carp, make, diffutils, gawk
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc
BuildRequires: net-tools, hostname, bc
BuildRequires: xmlto, asciidoc
%if %{with_sparse}
BuildRequires: sparse >= 0.4.1
BuildRequires: sparse
%endif
%if %{with_perf}
BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) bison
@ -510,11 +510,7 @@ BuildRequires: pciutils-devel gettext
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
# Fancy new debuginfo generation introduced in Fedora 8/RHEL 6.
# The -r flag to find-debuginfo.sh invokes eu-strip --reloc-debug-sections
# which reduces the number of relocations in kernel module .ko.debug files and
# was introduced with rpm 4.9 and elfutils 0.153.
BuildRequires: rpm-build >= 4.9.0-1, elfutils >= elfutils-0.153-1
BuildRequires: rpm-build, elfutils
%define debuginfo_args --strict-build-id -r
%endif
@ -543,6 +539,7 @@ Source20: Makefile.config
Source21: config-debug
Source22: config-nodebug
Source23: config-generic
Source24: config-no-extra
Source30: config-x86-generic
Source31: config-i686-PAE
@ -624,15 +621,6 @@ Patch09: upstream-reverts.patch
# Standalone patches
#drop with next rebase
Patch100: taint-vbox.patch
#drop with next rebase
Patch110: vmbugon-warnon.patch
#drop with next rebase
Patch201: debug-bad-pte-modules.patch
Patch390: defaults-acpi-video.patch
Patch396: acpi-sony-nonvs-blacklist.patch
@ -646,6 +634,8 @@ Patch470: die-floppy-die.patch
Patch510: silence-noise.patch
Patch530: silence-fbcon-logo.patch
Patch600: x86-allow-1024-cpus.patch
Patch800: crash-driver.patch
# crypto/
@ -668,19 +658,12 @@ Patch1003: sysrq-secure-boot.patch
# nouveau + drm fixes
# intel drm is all merged upstream
Patch1824: drm-intel-next.patch
Patch1825: drm-i915-dp-stfu.patch
Patch1826: drm-i915-hush-check-crtc-state.patch
# Quiet boot fixes
# silence the ACPI blacklist code
Patch2802: silence-acpi-blacklist.patch
# media patches
Patch2899: v4l-dvb-fixes.patch
Patch2900: v4l-dvb-update.patch
Patch2901: v4l-dvb-experimental.patch
# fs fixes
# NFSv4
@ -703,8 +686,6 @@ Patch15000: nowatchdog-on-virt.patch
# lpae
Patch21001: arm-lpae-ax88796.patch
Patch21004: arm-sound-soc-samsung-dma-avoid-another-64bit-division.patch
Patch21005: arm-exynos-mp.patch
Patch21006: arm-highbank-for-3.12.patch
# ARM omap
Patch21010: arm-omap-load-tfp410.patch
@ -712,12 +693,17 @@ Patch21010: arm-omap-load-tfp410.patch
# ARM tegra
Patch21020: arm-tegra-usb-no-reset-linux33.patch
# ARM wandboard
Patch21030: arm-wandboard-quad.patch
# https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/patch/?id=3f1a91aa25579ba5e7268a47a73d2a83e4802c62
# ARM i.MX6
# http://www.spinics.net/lists/devicetree/msg08276.html
Patch21025: arm-imx6-utilite.patch
# AM33xx
Patch21100: am335x-bone.patch
# am33xx (BeagleBone)
# https://github.com/beagleboard/kernel
# Pulled primarily from the above git repo. First patch is all in arm-soc
# scheduled for 3.13. The others should be landing via other trees
Patch21030: arm-am33xx-arm-soc-upstream.patch
Patch21031: arm-am33xx-bblack.patch
Patch21032: arm-am33xx-cpsw.patch
#rhbz 754518
Patch21235: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
@ -730,42 +716,9 @@ Patch21247: ath9k_rx_dma_stop_check.patch
Patch22000: weird-root-dentry-name-debug.patch
#rhbz 927469
Patch23006: fix-child-thread-introspection.patch
Patch25047: drm-radeon-Disable-writeback-by-default-on-ppc.patch
#rhbz 977040
Patch25056: iwl3945-better-skb-management-in-rx-path.patch
Patch25057: iwl4965-better-skb-management-in-rx-path.patch
#rhbz 963715
Patch25077: media-cx23885-Fix-TeVii-S471-regression-since-introduction-of-ts2020.patch
#rhbz 985522
Patch25107: ntp-Make-periodic-RTC-update-more-reliable.patch
#rhbz 971893
Patch25109: bonding-driver-alb-learning.patch
#rhbz 902012
Patch25114: elevator-Fix-a-race-in-elevator-switching-and-md.patch
Patch25115: elevator-acquire-q-sysfs_lock-in-elevator_change.patch
#rhbz 974072
Patch25117: rt2800-add-support-for-rf3070.patch
#rhbz 1015989
Patch25122: netfilter-nf_conntrack-use-RCU-safe-kfree-for-conntr.patch
#rhbz 982153
Patch25123: iommu-Remove-stack-trace-from-broken-irq-remapping-warning.patch
#rhbz 998732
Patch25125: vfio-iommu-Fixed-interaction-of-VFIO_IOMMU_MAP_DMA.patch
#rhbz 896695
Patch25126: 0001-iwlwifi-don-t-WARN-on-host-commands-sent-when-firmwa.patch
Patch25127: 0002-iwlwifi-don-t-WARN-on-bad-firmware-state.patch
#rhbz 993744
@ -774,43 +727,11 @@ Patch25128: dm-cache-policy-mq_fix-large-scale-table-allocation-bug.patch
#rhbz 1000439
Patch25129: cpupower-Fix-segfault-due-to-incorrect-getopt_long-a.patch
#rhbz 1010679
Patch25130: fix-radeon-sound.patch
Patch25149: drm-radeon-24hz-audio-fixes.patch
#rhbz 984696
Patch25132: rt2800usb-slow-down-TX-status-polling.patch
#rhbz 1023413
Patch25135: alps-Support-for-Dell-XT2-model.patch
#rhbz 1011621
Patch25137: cifs-Allow-LANMAN-auth-for-unencapsulated-auth-methods.patch
#rhbz 1025769
Patch25142: iwlwifi-dvm-dont-override-mac80211-queue-setting.patch
Patch25143: drm-qxl-backport-fixes-for-Fedora.patch
Patch25160: drm-qxl-fix-memory-leak-in-release-list-handling.patch
Patch25144: Input-evdev-fall-back-to-vmalloc-for-client-event-buffer.patch
#CVE-2013-4563 rhbz 1030015 1030017
Patch25145: ipv6-fix-headroom-calculation-in-udp6_ufo_fragment.patch
#rhbz 1015905
Patch25146: 0001-ip6_output-fragment-outgoing-reassembled-skb-properl.patch
Patch25147: 0002-netfilter-push-reasm-skb-through-instead-of-original.patch
Patch25140: drm-qxl-backport-fixes-for-Fedora.patch
#rhbz 1011362
Patch25148: alx-Reset-phy-speed-after-resume.patch
#rhbz 1031086
Patch25150: slab_common-Do-not-check-for-duplicate-slab-names.patch
#rhbz 967652
Patch25151: KVM-x86-fix-emulation-of-movzbl-bpl-eax.patch
# Fix 15sec NFS mount delay
Patch25152: sunrpc-create-a-new-dummy-pipe-for-gssd-to-hold-open.patch
Patch25153: sunrpc-replace-gssd_running-with-more-reliable-check.patch
@ -819,22 +740,9 @@ Patch25154: nfs-check-gssd-running-before-krb5i-auth.patch
#CVE-2013-6382 rhbz 1033603 1034670
Patch25157: xfs-underflow-bug-in-xfs_attrlist_by_handle.patch
#rhbz 1022733
Patch25158: via-velocity-fix-netif_receive_skb-use-in-irq-disable.patch
#rhbz 998342
Patch25159: usbnet-fix-status-interrupt-urb-handling.patch
#CVE-2013-6405 rhbz 1035875 1035887
Patch25161: inet-prevent-leakage-of-uninitialized-memory-to-user.patch
Patch25162: inet-fix-addr_len-msg_namelen-assignment-in-recv_error-and-rxpmtu-functions.patch
#rhbz 958826
Patch25164: dell-laptop.patch
#CVE-2013-XXXX rhbz 1039845 1039874
Patch25165: net-rework-recvmsg-handler-msg_name-and-msg_namelen-.patch
#rhbz 1030802
Patch25170: Input-elantech-add-support-for-newer-August-2013-dev.patch
Patch25171: elantech-Properly-differentiate-between-clickpads-an.patch
@ -1391,17 +1299,9 @@ ApplyOptionalPatch compile-fixes.patch
# revert patches from upstream that conflict or that we get via other means
ApplyOptionalPatch upstream-reverts.patch -R
#drop with next rebase
ApplyPatch taint-vbox.patch
#drop with next rebase
ApplyPatch vmbugon-warnon.patch
#drop with next rebase
ApplyPatch debug-bad-pte-modules.patch
# Architecture patches
# x86(-64)
ApplyPatch x86-allow-1024-cpus.patch
# ARM64
@ -1410,14 +1310,13 @@ ApplyPatch debug-bad-pte-modules.patch
#
ApplyPatch arm-lpae-ax88796.patch
ApplyPatch arm-sound-soc-samsung-dma-avoid-another-64bit-division.patch
ApplyPatch arm-exynos-mp.patch
ApplyPatch arm-highbank-for-3.12.patch
ApplyPatch arm-omap-load-tfp410.patch
ApplyPatch arm-tegra-usb-no-reset-linux33.patch
ApplyPatch arm-wandboard-quad.patch
ApplyPatch arm-imx6-utilite.patch
# Fix OMAP and AM33xx (BeagleBone)
ApplyPatch am335x-bone.patch
ApplyPatch arm-am33xx-arm-soc-upstream.patch
ApplyPatch arm-am33xx-bblack.patch
ApplyPatch arm-am33xx-cpsw.patch
#
# bugfixes to drivers and filesystems
@ -1500,21 +1399,13 @@ ApplyPatch sysrq-secure-boot.patch
# Nouveau DRM
# Intel DRM
ApplyOptionalPatch drm-intel-next.patch
ApplyPatch drm-i915-dp-stfu.patch
ApplyPatch drm-i915-hush-check-crtc-state.patch
# Radeon DRM
# silence the ACPI blacklist code
ApplyPatch silence-acpi-blacklist.patch
# V4L/DVB updates/fixes/experimental drivers
# apply if non-empty
ApplyOptionalPatch v4l-dvb-fixes.patch
ApplyOptionalPatch v4l-dvb-update.patch
ApplyOptionalPatch v4l-dvb-experimental.patch
# Patches headed upstream
ApplyPatch fs-proc-devtree-remove_proc_entry.patch
@ -1531,7 +1422,7 @@ ApplyPatch nowatchdog-on-virt.patch
#rhbz 754518
ApplyPatch scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
ApplyPatch weird-root-dentry-name-debug.patch
#pplyPatch weird-root-dentry-name-debug.patch
# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
ApplyPatch criu-no-expert.patch
@ -1539,42 +1430,9 @@ ApplyPatch criu-no-expert.patch
#rhbz 892811
ApplyPatch ath9k_rx_dma_stop_check.patch
#rhbz 927469
ApplyPatch fix-child-thread-introspection.patch
ApplyPatch drm-radeon-Disable-writeback-by-default-on-ppc.patch
#rhbz 977040
ApplyPatch iwl3945-better-skb-management-in-rx-path.patch
ApplyPatch iwl4965-better-skb-management-in-rx-path.patch
#rhbz 963715
ApplyPatch media-cx23885-Fix-TeVii-S471-regression-since-introduction-of-ts2020.patch
#rhbz 985522
ApplyPatch ntp-Make-periodic-RTC-update-more-reliable.patch
#rhbz 971893
ApplyPatch bonding-driver-alb-learning.patch
#rhbz 902012
ApplyPatch elevator-Fix-a-race-in-elevator-switching-and-md.patch
ApplyPatch elevator-acquire-q-sysfs_lock-in-elevator_change.patch
#rhbz 974072
ApplyPatch rt2800-add-support-for-rf3070.patch
#rhbz 1015989
ApplyPatch netfilter-nf_conntrack-use-RCU-safe-kfree-for-conntr.patch
#rhbz 982153
ApplyPatch iommu-Remove-stack-trace-from-broken-irq-remapping-warning.patch
#rhbz 998732
ApplyPatch vfio-iommu-Fixed-interaction-of-VFIO_IOMMU_MAP_DMA.patch
#rhbz 896695
ApplyPatch 0001-iwlwifi-don-t-WARN-on-host-commands-sent-when-firmwa.patch
ApplyPatch 0002-iwlwifi-don-t-WARN-on-bad-firmware-state.patch
#rhbz 993744
@ -1583,43 +1441,11 @@ ApplyPatch dm-cache-policy-mq_fix-large-scale-table-allocation-bug.patch
#rhbz 1000439
ApplyPatch cpupower-Fix-segfault-due-to-incorrect-getopt_long-a.patch
#rhbz 1010679
ApplyPatch fix-radeon-sound.patch
ApplyPatch drm-radeon-24hz-audio-fixes.patch
#rhbz 984696
ApplyPatch rt2800usb-slow-down-TX-status-polling.patch
#rhbz 1023413
ApplyPatch alps-Support-for-Dell-XT2-model.patch
#rhbz 1011621
ApplyPatch cifs-Allow-LANMAN-auth-for-unencapsulated-auth-methods.patch
#rhbz 1025769
ApplyPatch iwlwifi-dvm-dont-override-mac80211-queue-setting.patch
ApplyPatch drm-qxl-backport-fixes-for-Fedora.patch
ApplyPatch drm-qxl-fix-memory-leak-in-release-list-handling.patch
ApplyPatch Input-evdev-fall-back-to-vmalloc-for-client-event-buffer.patch
#CVE-2013-4563 rhbz 1030015 1030017
ApplyPatch ipv6-fix-headroom-calculation-in-udp6_ufo_fragment.patch
#rhbz 1015905
ApplyPatch 0001-ip6_output-fragment-outgoing-reassembled-skb-properl.patch
ApplyPatch 0002-netfilter-push-reasm-skb-through-instead-of-original.patch
#rhbz 1011362
ApplyPatch alx-Reset-phy-speed-after-resume.patch
#rhbz 1031086
ApplyPatch slab_common-Do-not-check-for-duplicate-slab-names.patch
#rhbz 967652
ApplyPatch KVM-x86-fix-emulation-of-movzbl-bpl-eax.patch
# Fix 15sec NFS mount delay
ApplyPatch sunrpc-create-a-new-dummy-pipe-for-gssd-to-hold-open.patch
ApplyPatch sunrpc-replace-gssd_running-with-more-reliable-check.patch
@ -1628,22 +1454,9 @@ ApplyPatch nfs-check-gssd-running-before-krb5i-auth.patch
#CVE-2013-6382 rhbz 1033603 1034670
ApplyPatch xfs-underflow-bug-in-xfs_attrlist_by_handle.patch
#rhbz 1022733
ApplyPatch via-velocity-fix-netif_receive_skb-use-in-irq-disable.patch
#rhbz 998342
ApplyPatch usbnet-fix-status-interrupt-urb-handling.patch
#CVE-2013-6405 rhbz 1035875 1035887
ApplyPatch inet-prevent-leakage-of-uninitialized-memory-to-user.patch
ApplyPatch inet-fix-addr_len-msg_namelen-assignment-in-recv_error-and-rxpmtu-functions.patch
#rhbz 958826
ApplyPatch dell-laptop.patch
#CVE-2013-XXXX rhbz 1039845 1039874
ApplyPatch net-rework-recvmsg-handler-msg_name-and-msg_namelen-.patch
#rhbz 1030802
ApplyPatch Input-elantech-add-support-for-newer-August-2013-dev.patch
ApplyPatch elantech-Properly-differentiate-between-clickpads-an.patch
@ -2012,7 +1825,7 @@ BuildKernel %make_target %kernel_image smp
%endif
%global perf_make \
make -s %{?cross_opts} %{?_smp_mflags} -C tools/perf V=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_LIBNUMA=1 NO_STRLCPY=1 prefix=%{_prefix}
make -s %{?cross_opts} %{?_smp_mflags} -C tools/perf V=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_LIBNUMA=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix}
%if %{with_perf}
# perf
%{perf_make} all
@ -2462,6 +2275,9 @@ fi
# ||----w |
# || ||
%changelog
* Fri Dec 13 2013 Justin M. Forbes <jforbes@fedoraproject.org - 3.12.5-300
- Linux v3.12.5 rebase
* Thu Dec 12 2013 Josh Boyer <jwboyer@fedoraproject.org>
- CVE-2013-4587 kvm: out-of-bounds access (rhbz 1030986 1042071)
- CVE-2013-6376 kvm: BUG_ON in apic_cluster_id (rhbz 1033106 1042099)

33
keys-krb-support.patch
View File

@ -1,4 +1,4 @@
From 64160c504842a359801cff17464931fa028ff164 Mon Sep 17 00:00:00 2001
From d7ccdaa17aab12a49f5e9e327b55167c4af26bf8 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 30 Aug 2013 15:37:54 +0100
Subject: [PATCH 1/2] KEYS: Implement a big key type that can save to tmpfs
@ -308,7 +308,7 @@ index 0000000..5f9defc
1.8.3.1
From b1e5b74e060add16de8d6005802644fa1700167f Mon Sep 17 00:00:00 2001
From 862e98313b10123fa4352117b0b0c0f5a530cefb Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 30 Aug 2013 15:37:54 +0100
Subject: [PATCH 2/2] KEYS: Add per-user_namespace registers for persistent
@ -377,7 +377,7 @@ Tested-by: Simo Sorce <simo@redhat.com>
cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
---
include/linux/user_namespace.h | 6 ++
include/linux/user_namespace.h | 7 ++
include/uapi/linux/keyctl.h | 1 +
kernel/user.c | 4 +
kernel/user_namespace.c | 6 ++
@ -388,23 +388,24 @@ cc: Eric W. Biederman <ebiederm@xmission.com>
security/keys/keyctl.c | 3 +
security/keys/persistent.c | 169 +++++++++++++++++++++++++++++++++++++++++
security/keys/sysctl.c | 11 +++
11 files changed, 230 insertions(+)
11 files changed, 231 insertions(+)
create mode 100644 security/keys/persistent.c
diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h
index b6b215f..cf21958 100644
index 4db2985..bb0639d 100644
--- a/include/linux/user_namespace.h
+++ b/include/linux/user_namespace.h
@@ -28,6 +28,12 @@ struct user_namespace {
@@ -27,6 +27,13 @@ struct user_namespace {
kuid_t owner;
kgid_t group;
unsigned int proc_inum;
bool may_mount_sysfs;
bool may_mount_proc;
+
+ /* Register of per-UID persistent keyrings for this namespace */
+#ifdef CONFIG_PERSISTENT_KEYRINGS
+ struct key *persistent_keyring_register;
+ struct rw_semaphore persistent_keyring_register_sem;
+#endif
+
};
extern struct user_namespace init_user_ns;
@ -420,13 +421,13 @@ index c9b7f4fa..840cb99 100644
#endif /* _LINUX_KEYCTL_H */
diff --git a/kernel/user.c b/kernel/user.c
index 69b4c3d..6c9e1b9 100644
index 5bbb919..a3a0dbf 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -53,6 +53,10 @@ struct user_namespace init_user_ns = {
@@ -51,6 +51,10 @@ struct user_namespace init_user_ns = {
.owner = GLOBAL_ROOT_UID,
.group = GLOBAL_ROOT_GID,
.proc_inum = PROC_USER_INIT_INO,
.may_mount_sysfs = true,
.may_mount_proc = true,
+#ifdef CONFIG_KEYS_KERBEROS_CACHE
+ .krb_cache_register_sem =
+ __RWSEM_INITIALIZER(init_user_ns.krb_cache_register_sem),
@ -435,12 +436,12 @@ index 69b4c3d..6c9e1b9 100644
EXPORT_SYMBOL_GPL(init_user_ns);
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index d8c30db..ef7985e 100644
index 13fb113..2dbc299 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -99,6 +99,9 @@ int create_user_ns(struct cred *new)
@@ -101,6 +101,9 @@ int create_user_ns(struct cred *new)
update_mnt_policy(ns);
set_cred_user_ns(new, ns);
+#ifdef CONFIG_PERSISTENT_KEYRINGS
+ rwsem_init(&ns->persistent_keyring_register_sem);
@ -448,7 +449,7 @@ index d8c30db..ef7985e 100644
return 0;
}
@@ -123,6 +126,9 @@ void free_user_ns(struct user_namespace *ns)
@@ -130,6 +133,9 @@ void free_user_ns(struct user_namespace *ns)
do {
parent = ns->parent;

1696
keys-x509-improv.patch
View File

File diff suppressed because it is too large Load Diff

30
media-cx23885-Fix-TeVii-S471-regression-since-introduction-of-ts2020.patch
View File

@ -1,30 +0,0 @@
From b43ea8068d2090cb1e44632c8a938ab40d2c7419 Mon Sep 17 00:00:00 2001
From: Johannes Koch <johannes@ortsraum.de>
Date: Wed, 17 Jul 2013 17:28:16 +0000
Subject: [media] cx23885: Fix TeVii S471 regression since introduction of ts2020
Patch to make TeVii S471 cards use the ts2020 tuner, since ds3000 driver no
longer contains tuning code.
Signed-off-by: Johannes Koch <johannes@ortsraum.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
(limited to 'drivers/media/pci/cx23885/cx23885-dvb.c')
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 9c5ed10..bb291c6 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -1249,6 +1249,10 @@ static int dvb_register(struct cx23885_tsport *port)
fe0->dvb.frontend = dvb_attach(ds3000_attach,
&tevii_ds3000_config,
&i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(ts2020_attach, fe0->dvb.frontend,
+ &tevii_ts2020_config, &i2c_bus->i2c_adap);
+ }
break;
case CX23885_BOARD_PROF_8000:
i2c_bus = &dev->i2c_bus[0];
--
cgit v0.9.2

4
modsign-uefi.patch
View File

@ -321,8 +321,8 @@ index 564dd93..389b50d 100644
+struct key *system_blacklist_keyring;
+#endif
extern __initdata const u8 system_certificate_list[];
extern __initdata const u8 system_certificate_list_end[];
extern __initconst const u8 system_certificate_list[];
extern __initconst const u8 system_certificate_list_end[];
@@ -41,6 +44,20 @@ static __init int system_trusted_keyring_init(void)
panic("Can't allocate system trusted keyring\n");

774
net-rework-recvmsg-handler-msg_name-and-msg_namelen-.patch
View File

@ -1,774 +0,0 @@
Bugzilla: 1039874
Upstream-status: 3.13 and 3.12.4
From 9cb9fb275f8794546dc31a79f2f02127fed5baf2 Mon Sep 17 00:00:00 2001
From: Hannes Frederic Sowa <hannes@stressinduktion.org>
Date: Thu, 21 Nov 2013 03:14:22 +0100
Subject: [PATCH] net: rework recvmsg handler msg_name and msg_namelen logic
[ Upstream commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ]
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.
This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.
Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.
Also document these changes in include/linux/net.h as suggested by David
Miller.
Changes since RFC:
Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.
With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
msg->msg_name = NULL
".
This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.
Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.
Cc: David Miller <davem@davemloft.net>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
crypto/algif_hash.c | 2 --
crypto/algif_skcipher.c | 1 -
drivers/isdn/mISDN/socket.c | 13 ++++---------
drivers/net/ppp/pppoe.c | 2 --
include/linux/net.h | 8 ++++++++
net/appletalk/ddp.c | 16 +++++++---------
net/atm/common.c | 2 --
net/ax25/af_ax25.c | 4 ++--
net/bluetooth/af_bluetooth.c | 4 ----
net/bluetooth/hci_sock.c | 2 --
net/bluetooth/rfcomm/sock.c | 1 -
net/bluetooth/sco.c | 1 -
net/caif/caif_socket.c | 4 ----
net/compat.c | 3 ++-
net/core/iovec.c | 3 ++-
net/ipx/af_ipx.c | 3 +--
net/irda/af_irda.c | 4 ----
net/iucv/af_iucv.c | 2 --
net/key/af_key.c | 1 -
net/l2tp/l2tp_ppp.c | 2 --
net/llc/af_llc.c | 2 --
net/netlink/af_netlink.c | 2 --
net/netrom/af_netrom.c | 3 +--
net/nfc/llcp_sock.c | 2 --
net/nfc/rawsock.c | 2 --
net/packet/af_packet.c | 32 +++++++++++++++-----------------
net/rds/recv.c | 2 --
net/rose/af_rose.c | 8 +++++---
net/rxrpc/ar-recvmsg.c | 9 ++++++---
net/socket.c | 19 +++++++++++--------
net/tipc/socket.c | 6 ------
net/unix/af_unix.c | 5 -----
net/vmw_vsock/af_vsock.c | 2 --
net/vmw_vsock/vmci_transport.c | 2 --
net/x25/af_x25.c | 3 +--
35 files changed, 65 insertions(+), 112 deletions(-)
diff --git a/crypto/algif_hash.c b/crypto/algif_hash.c
index 0262210..ef5356c 100644
--- a/crypto/algif_hash.c
+++ b/crypto/algif_hash.c
@@ -161,8 +161,6 @@ static int hash_recvmsg(struct kiocb *unused, struct socket *sock,
else if (len < ds)
msg->msg_flags |= MSG_TRUNC;
- msg->msg_namelen = 0;
-
lock_sock(sk);
if (ctx->more) {
ctx->more = 0;
diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c
index a1c4f0a..6a6dfc0 100644
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -432,7 +432,6 @@ static int skcipher_recvmsg(struct kiocb *unused, struct socket *sock,
long copied = 0;
lock_sock(sk);
- msg->msg_namelen = 0;
for (iov = msg->msg_iov, iovlen = msg->msg_iovlen; iovlen > 0;
iovlen--, iov++) {
unsigned long seglen = iov->iov_len;
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index e47dcb9..5cefb47 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -117,7 +117,6 @@ mISDN_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
{
struct sk_buff *skb;
struct sock *sk = sock->sk;
- struct sockaddr_mISDN *maddr;
int copied, err;
@@ -135,9 +134,9 @@ mISDN_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
if (!skb)
return err;
- if (msg->msg_namelen >= sizeof(struct sockaddr_mISDN)) {
- msg->msg_namelen = sizeof(struct sockaddr_mISDN);
- maddr = (struct sockaddr_mISDN *)msg->msg_name;
+ if (msg->msg_name) {
+ struct sockaddr_mISDN *maddr = msg->msg_name;
+
maddr->family = AF_ISDN;
maddr->dev = _pms(sk)->dev->id;
if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
@@ -150,11 +149,7 @@ mISDN_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
maddr->sapi = _pms(sk)->ch.addr & 0xFF;
maddr->tei = (_pms(sk)->ch.addr >> 8) & 0xFF;
}
- } else {
- if (msg->msg_namelen)
- printk(KERN_WARNING "%s: too small namelen %d\n",
- __func__, msg->msg_namelen);
- msg->msg_namelen = 0;
+ msg->msg_namelen = sizeof(*maddr);
}
copied = skb->len + MISDN_HEADER_LEN;
diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c
index 5f66e30..82ee6ed 100644
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -979,8 +979,6 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock,
if (error < 0)
goto end;
- m->msg_namelen = 0;
-
if (skb) {
total_len = min_t(size_t, total_len, skb->len);
error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len);
diff --git a/include/linux/net.h b/include/linux/net.h
index 4f27575..8bd9d92 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -163,6 +163,14 @@ struct proto_ops {
#endif
int (*sendmsg) (struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t total_len);
+ /* Notes for implementing recvmsg:
+ * ===============================
+ * msg->msg_namelen should get updated by the recvmsg handlers
+ * iff msg_name != NULL. It is by default 0 to prevent
+ * returning uninitialized memory to user space. The recvfrom
+ * handlers can assume that msg.msg_name is either NULL or has
+ * a minimum size of sizeof(struct sockaddr_storage).
+ */
int (*recvmsg) (struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t total_len,
int flags);
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 7fee50d..7d424ac 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1735,7 +1735,6 @@ static int atalk_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr
size_t size, int flags)
{
struct sock *sk = sock->sk;
- struct sockaddr_at *sat = (struct sockaddr_at *)msg->msg_name;
struct ddpehdr *ddp;
int copied = 0;
int offset = 0;
@@ -1764,14 +1763,13 @@ static int atalk_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr
}
err = skb_copy_datagram_iovec(skb, offset, msg->msg_iov, copied);
- if (!err) {
- if (sat) {
- sat->sat_family = AF_APPLETALK;
- sat->sat_port = ddp->deh_sport;
- sat->sat_addr.s_node = ddp->deh_snode;
- sat->sat_addr.s_net = ddp->deh_snet;
- }
- msg->msg_namelen = sizeof(*sat);
+ if (!err && msg->msg_name) {
+ struct sockaddr_at *sat = msg->msg_name;
+ sat->sat_family = AF_APPLETALK;
+ sat->sat_port = ddp->deh_sport;
+ sat->sat_addr.s_node = ddp->deh_snode;
+ sat->sat_addr.s_net = ddp->deh_snet;
+ msg->msg_namelen = sizeof(*sat);
}
skb_free_datagram(sk, skb); /* Free the datagram. */
diff --git a/net/atm/common.c b/net/atm/common.c
index 737bef5..7b49100 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -531,8 +531,6 @@ int vcc_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
struct sk_buff *skb;
int copied, error = -EINVAL;
- msg->msg_namelen = 0;
-
if (sock->state != SS_CONNECTED)
return -ENOTCONN;
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 4b4d2b7..78c474f 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1636,11 +1636,11 @@ static int ax25_recvmsg(struct kiocb *iocb, struct socket *sock,
skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
- if (msg->msg_namelen != 0) {
- struct sockaddr_ax25 *sax = (struct sockaddr_ax25 *)msg->msg_name;
+ if (msg->msg_name) {
ax25_digi digi;
ax25_address src;
const unsigned char *mac = skb_mac_header(skb);
+ struct sockaddr_ax25 *sax = msg->msg_name;
memset(sax, 0, sizeof(struct full_sockaddr_ax25));
ax25_addr_parse(mac + 1, skb->data - mac - 1, &src, NULL,
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 9096137..6629cdc 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -221,8 +221,6 @@ int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
if (flags & (MSG_OOB))
return -EOPNOTSUPP;
- msg->msg_namelen = 0;
-
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb) {
if (sk->sk_shutdown & RCV_SHUTDOWN)
@@ -287,8 +285,6 @@ int bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
if (flags & MSG_OOB)
return -EOPNOTSUPP;
- msg->msg_namelen = 0;
-
BT_DBG("sk %p size %zu", sk, size);
lock_sock(sk);
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 9bd7d95..fa4bf66 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -752,8 +752,6 @@ static int hci_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
if (!skb)
return err;
- msg->msg_namelen = 0;
-
copied = skb->len;
if (len < copied) {
msg->msg_flags |= MSG_TRUNC;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 30b3721..c1c6028 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -608,7 +608,6 @@ static int rfcomm_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
- msg->msg_namelen = 0;
return 0;
}
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index e7bd4ee..2bb1d3a 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -700,7 +700,6 @@ static int sco_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) {
sco_conn_defer_accept(pi->conn->hcon, 0);
sk->sk_state = BT_CONFIG;
- msg->msg_namelen = 0;
release_sock(sk);
return 0;
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index 05a41c7..d6be3ed 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -286,8 +286,6 @@ static int caif_seqpkt_recvmsg(struct kiocb *iocb, struct socket *sock,
if (m->msg_flags&MSG_OOB)
goto read_error;
- m->msg_namelen = 0;
-
skb = skb_recv_datagram(sk, flags, 0 , &ret);
if (!skb)
goto read_error;
@@ -361,8 +359,6 @@ static int caif_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
if (flags&MSG_OOB)
goto out;
- msg->msg_namelen = 0;
-
/*
* Lock the socket to prevent queue disordering
* while sleeps in memcpy_tomsg
diff --git a/net/compat.c b/net/compat.c
index 8903258..618c6a8 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -93,7 +93,8 @@ int verify_compat_iovec(struct msghdr *kern_msg, struct iovec *kern_iov,
if (err < 0)
return err;
}
- kern_msg->msg_name = kern_address;
+ if (kern_msg->msg_name)
+ kern_msg->msg_name = kern_address;
} else
kern_msg->msg_name = NULL;
diff --git a/net/core/iovec.c b/net/core/iovec.c
index de178e4..9a31515 100644
--- a/net/core/iovec.c
+++ b/net/core/iovec.c
@@ -48,7 +48,8 @@ int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *a
if (err < 0)
return err;
}
- m->msg_name = address;
+ if (m->msg_name)
+ m->msg_name = address;
} else {
m->msg_name = NULL;
}
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 7a1e0fc..e096025 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1823,8 +1823,6 @@ static int ipx_recvmsg(struct kiocb *iocb, struct socket *sock,
if (skb->tstamp.tv64)
sk->sk_stamp = skb->tstamp;
- msg->msg_namelen = sizeof(*sipx);
-
if (sipx) {
sipx->sipx_family = AF_IPX;
sipx->sipx_port = ipx->ipx_source.sock;
@@ -1832,6 +1830,7 @@ static int ipx_recvmsg(struct kiocb *iocb, struct socket *sock,
sipx->sipx_network = IPX_SKB_CB(skb)->ipx_source_net;
sipx->sipx_type = ipx->ipx_type;
sipx->sipx_zero = 0;
+ msg->msg_namelen = sizeof(*sipx);
}
rc = copied;
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 0578d4f..a5e62ef5 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1385,8 +1385,6 @@ static int irda_recvmsg_dgram(struct kiocb *iocb, struct socket *sock,
IRDA_DEBUG(4, "%s()\n", __func__);
- msg->msg_namelen = 0;
-
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &err);
if (!skb)
@@ -1451,8 +1449,6 @@ static int irda_recvmsg_stream(struct kiocb *iocb, struct socket *sock,
target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
timeo = sock_rcvtimeo(sk, noblock);
- msg->msg_namelen = 0;
-
do {
int chunk;
struct sk_buff *skb = skb_dequeue(&sk->sk_receive_queue);
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 168aff5..c4b7218 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -1324,8 +1324,6 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
int err = 0;
u32 offset;
- msg->msg_namelen = 0;
-
if ((sk->sk_state == IUCV_DISCONN) &&
skb_queue_empty(&iucv->backlog_skb_q) &&
skb_queue_empty(&sk->sk_receive_queue) &&
diff --git a/net/key/af_key.c b/net/key/af_key.c
index ab8bd2c..66f51c5 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3623,7 +3623,6 @@ static int pfkey_recvmsg(struct kiocb *kiocb,
if (flags & ~(MSG_PEEK|MSG_DONTWAIT|MSG_TRUNC|MSG_CMSG_COMPAT))
goto out;
- msg->msg_namelen = 0;
skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &err);
if (skb == NULL)
goto out;
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 8c46b27..44441c0 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -197,8 +197,6 @@ static int pppol2tp_recvmsg(struct kiocb *iocb, struct socket *sock,
if (sk->sk_state & PPPOX_BOUND)
goto end;
- msg->msg_namelen = 0;
-
err = 0;
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &err);
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 48aaa89..8870988 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -720,8 +720,6 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
int target; /* Read at least this many bytes */
long timeo;
- msg->msg_namelen = 0;
-
lock_sock(sk);
copied = -ENOTCONN;
if (unlikely(sk->sk_type == SOCK_STREAM && sk->sk_state == TCP_LISTEN))
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 0c61b59..90b654b 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2317,8 +2317,6 @@ static int netlink_recvmsg(struct kiocb *kiocb, struct socket *sock,
}
#endif
- msg->msg_namelen = 0;
-
copied = data_skb->len;
if (len < copied) {
msg->msg_flags |= MSG_TRUNC;
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 698814b..53c19a3 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -1179,10 +1179,9 @@ static int nr_recvmsg(struct kiocb *iocb, struct socket *sock,
sax->sax25_family = AF_NETROM;
skb_copy_from_linear_data_offset(skb, 7, sax->sax25_call.ax25_call,
AX25_ADDR_LEN);
+ msg->msg_namelen = sizeof(*sax);
}
- msg->msg_namelen = sizeof(*sax);
-
skb_free_datagram(sk, skb);
release_sock(sk);
diff --git a/net/nfc/llcp_sock.c b/net/nfc/llcp_sock.c
index d308402..824c605 100644
--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -807,8 +807,6 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
pr_debug("%p %zu\n", sk, len);
- msg->msg_namelen = 0;
-
lock_sock(sk);
if (sk->sk_state == LLCP_CLOSED &&
diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c
index 313bf1b..5d11f4a 100644
--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -241,8 +241,6 @@ static int rawsock_recvmsg(struct kiocb *iocb, struct socket *sock,
if (!skb)
return rc;
- msg->msg_namelen = 0;
-
copied = skb->len;
if (len < copied) {
msg->msg_flags |= MSG_TRUNC;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 75c8bbf..739c50d 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2694,7 +2694,6 @@ static int packet_recvmsg(struct kiocb *iocb, struct socket *sock,
struct sock *sk = sock->sk;
struct sk_buff *skb;
int copied, err;
- struct sockaddr_ll *sll;
int vnet_hdr_len = 0;
err = -EINVAL;
@@ -2777,22 +2776,10 @@ static int packet_recvmsg(struct kiocb *iocb, struct socket *sock,
goto out_free;
}
- /*
- * If the address length field is there to be filled in, we fill
- * it in now.
- */
-
- sll = &PACKET_SKB_CB(skb)->sa.ll;
- if (sock->type == SOCK_PACKET)
- msg->msg_namelen = sizeof(struct sockaddr_pkt);
- else
- msg->msg_namelen = sll->sll_halen + offsetof(struct sockaddr_ll, sll_addr);
-
- /*
- * You lose any data beyond the buffer you gave. If it worries a
- * user program they can ask the device for its MTU anyway.
+ /* You lose any data beyond the buffer you gave. If it worries
+ * a user program they can ask the device for its MTU
+ * anyway.
*/
-
copied = skb->len;
if (copied > len) {
copied = len;
@@ -2805,9 +2792,20 @@ static int packet_recvmsg(struct kiocb *iocb, struct socket *sock,
sock_recv_ts_and_drops(msg, sk, skb);
- if (msg->msg_name)
+ if (msg->msg_name) {
+ /* If the address length field is there to be filled
+ * in, we fill it in now.
+ */
+ if (sock->type == SOCK_PACKET) {
+ msg->msg_namelen = sizeof(struct sockaddr_pkt);
+ } else {
+ struct sockaddr_ll *sll = &PACKET_SKB_CB(skb)->sa.ll;
+ msg->msg_namelen = sll->sll_halen +
+ offsetof(struct sockaddr_ll, sll_addr);
+ }
memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa,
msg->msg_namelen);
+ }
if (pkt_sk(sk)->auxdata) {
struct tpacket_auxdata aux;
diff --git a/net/rds/recv.c b/net/rds/recv.c
index 9f0f17c..de339b2 100644
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -410,8 +410,6 @@ int rds_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
rdsdebug("size %zu flags 0x%x timeo %ld\n", size, msg_flags, timeo);
- msg->msg_namelen = 0;
-
if (msg_flags & MSG_OOB)
goto out;
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index e98fcfb..33af772 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -1216,7 +1216,6 @@ static int rose_recvmsg(struct kiocb *iocb, struct socket *sock,
{
struct sock *sk = sock->sk;
struct rose_sock *rose = rose_sk(sk);
- struct sockaddr_rose *srose = (struct sockaddr_rose *)msg->msg_name;
size_t copied;
unsigned char *asmptr;
struct sk_buff *skb;
@@ -1252,8 +1251,11 @@ static int rose_recvmsg(struct kiocb *iocb, struct socket *sock,
skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
- if (srose != NULL) {
- memset(srose, 0, msg->msg_namelen);
+ if (msg->msg_name) {
+ struct sockaddr_rose *srose;
+
+ memset(msg->msg_name, 0, sizeof(struct full_sockaddr_rose));
+ srose = msg->msg_name;
srose->srose_family = AF_ROSE;
srose->srose_addr = rose->dest_addr;
srose->srose_call = rose->dest_call;
diff --git a/net/rxrpc/ar-recvmsg.c b/net/rxrpc/ar-recvmsg.c
index 4b48687..898492a 100644
--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -143,10 +143,13 @@ int rxrpc_recvmsg(struct kiocb *iocb, struct socket *sock,
/* copy the peer address and timestamp */
if (!continue_call) {
- if (msg->msg_name && msg->msg_namelen > 0)
+ if (msg->msg_name) {
+ size_t len =
+ sizeof(call->conn->trans->peer->srx);
memcpy(msg->msg_name,
- &call->conn->trans->peer->srx,
- sizeof(call->conn->trans->peer->srx));
+ &call->conn->trans->peer->srx, len);
+ msg->msg_namelen = len;
+ }
sock_recv_ts_and_drops(msg, &rx->sk, skb);
}
diff --git a/net/socket.c b/net/socket.c
index 4b94643..5158ff7 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1849,8 +1849,10 @@ SYSCALL_DEFINE6(recvfrom, int, fd, void __user *, ubuf, size_t, size,
msg.msg_iov = &iov;
iov.iov_len = size;
iov.iov_base = ubuf;
- msg.msg_name = (struct sockaddr *)&address;
- msg.msg_namelen = sizeof(address);
+ /* Save some cycles and don't copy the address if not needed */
+ msg.msg_name = addr ? (struct sockaddr *)&address : NULL;
+ /* We assume all kernel code knows the size of sockaddr_storage */
+ msg.msg_namelen = 0;
if (sock->file->f_flags & O_NONBLOCK)
flags |= MSG_DONTWAIT;
err = sock_recvmsg(sock, &msg, size, flags);
@@ -2230,16 +2232,14 @@ static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
goto out;
}
- /*
- * Save the user-mode address (verify_iovec will change the
- * kernel msghdr to use the kernel address space)
+ /* Save the user-mode address (verify_iovec will change the
+ * kernel msghdr to use the kernel address space)
*/
-
uaddr = (__force void __user *)msg_sys->msg_name;
uaddr_len = COMPAT_NAMELEN(msg);
- if (MSG_CMSG_COMPAT & flags) {
+ if (MSG_CMSG_COMPAT & flags)
err = verify_compat_iovec(msg_sys, iov, &addr, VERIFY_WRITE);
- } else
+ else
err = verify_iovec(msg_sys, iov, &addr, VERIFY_WRITE);
if (err < 0)
goto out_freeiov;
@@ -2248,6 +2248,9 @@ static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
cmsg_ptr = (unsigned long)msg_sys->msg_control;
msg_sys->msg_flags = flags & (MSG_CMSG_CLOEXEC|MSG_CMSG_COMPAT);
+ /* We assume all kernel code knows the size of sockaddr_storage */
+ msg_sys->msg_namelen = 0;
+
if (sock->file->f_flags & O_NONBLOCK)
flags |= MSG_DONTWAIT;
err = (nosec ? sock_recvmsg_nosec : sock_recvmsg)(sock, msg_sys,
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 6cc7ddd..dffdbea 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -984,9 +984,6 @@ static int recv_msg(struct kiocb *iocb, struct socket *sock,
goto exit;
}
- /* will be updated in set_orig_addr() if needed */
- m->msg_namelen = 0;
-
timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
restart:
@@ -1095,9 +1092,6 @@ static int recv_stream(struct kiocb *iocb, struct socket *sock,
goto exit;
}
- /* will be updated in set_orig_addr() if needed */
- m->msg_namelen = 0;
-
target = sock_rcvlowat(sk, flags & MSG_WAITALL, buf_len);
timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index e64bbcf..6c66e8d 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1762,7 +1762,6 @@ static void unix_copy_addr(struct msghdr *msg, struct sock *sk)
{
struct unix_sock *u = unix_sk(sk);
- msg->msg_namelen = 0;
if (u->addr) {
msg->msg_namelen = u->addr->len;
memcpy(msg->msg_name, u->addr->name, u->addr->len);
@@ -1786,8 +1785,6 @@ static int unix_dgram_recvmsg(struct kiocb *iocb, struct socket *sock,
if (flags&MSG_OOB)
goto out;
- msg->msg_namelen = 0;
-
err = mutex_lock_interruptible(&u->readlock);
if (err) {
err = sock_intr_errno(sock_rcvtimeo(sk, noblock));
@@ -1927,8 +1924,6 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
target = sock_rcvlowat(sk, flags&MSG_WAITALL, size);
timeo = sock_rcvtimeo(sk, flags&MSG_DONTWAIT);
- msg->msg_namelen = 0;
-
/* Lock the socket to prevent queue disordering
* while sleeps in memcpy_tomsg
*/
diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index 4d93346..16f721c 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -1663,8 +1663,6 @@ vsock_stream_recvmsg(struct kiocb *kiocb,
vsk = vsock_sk(sk);
err = 0;
- msg->msg_namelen = 0;
-
lock_sock(sk);
if (sk->sk_state != SS_CONNECTED) {
diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c
index ffc11df..73ca104 100644
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -1746,8 +1746,6 @@ static int vmci_transport_dgram_dequeue(struct kiocb *kiocb,
if (flags & MSG_OOB || flags & MSG_ERRQUEUE)
return -EOPNOTSUPP;
- msg->msg_namelen = 0;
-
/* Retrieve the head sk_buff from the socket's receive queue. */
err = 0;
skb = skb_recv_datagram(&vsk->sk, flags, noblock, &err);
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 45a3ab5..7622789 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -1340,10 +1340,9 @@ static int x25_recvmsg(struct kiocb *iocb, struct socket *sock,
if (sx25) {
sx25->sx25_family = AF_X25;
sx25->sx25_addr = x25->dest_addr;
+ msg->msg_namelen = sizeof(*sx25);
}
- msg->msg_namelen = sizeof(struct sockaddr_x25);
-
x25_check_rbuf(sk);
rc = copied;
out_free_dgram:
--
1.8.3.1

35
netfilter-nf_conntrack-use-RCU-safe-kfree-for-conntr.patch
View File

@ -1,35 +0,0 @@
From c13a84a830a208fb3443628773c8ca0557773cc7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= <mkubecek@suse.cz>
Date: Wed, 11 Sep 2013 10:17:27 +0200
Subject: [PATCH] netfilter: nf_conntrack: use RCU safe kfree for conntrack
extensions
Commit 68b80f11 (netfilter: nf_nat: fix RCU races) introduced
RCU protection for freeing extension data when reallocation
moves them to a new location. We need the same protection when
freeing them in nf_ct_ext_free() in order to prevent a
use-after-free by other threads referencing a NAT extension data
via bysource list.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
include/net/netfilter/nf_conntrack_extend.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
index ff95434..88a1d40 100644
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -86,7 +86,7 @@ static inline void nf_ct_ext_destroy(struct nf_conn *ct)
static inline void nf_ct_ext_free(struct nf_conn *ct)
{
if (ct->ext)
- kfree(ct->ext);
+ kfree_rcu(ct->ext, rcu);
}
/* Add this type, returns pointer to data or NULL. */
--
1.8.3.1

44
ntp-Make-periodic-RTC-update-more-reliable.patch
View File

@ -1,44 +0,0 @@
From a97ad0c4b447a132a322cedc3a5f7fa4cab4b304 Mon Sep 17 00:00:00 2001
From: Miroslav Lichvar <mlichvar@redhat.com>
Date: Thu, 1 Aug 2013 19:31:35 +0200
Subject: [PATCH] ntp: Make periodic RTC update more reliable
The current code requires that the scheduled update of the RTC happens
in the closest tick to the half of the second. This seems to be
difficult to achieve reliably. The scheduled work may be missing the
target time by a tick or two and be constantly rescheduled every second.
Relax the limit to 10 ticks. As a typical RTC drifts in the 11-minute
update interval by several milliseconds, this shouldn't affect the
overall accuracy of the RTC much.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
kernel/time/ntp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 8f5b3b9..ab1fa7c 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -475,6 +475,7 @@ static void sync_cmos_clock(struct work_struct *work)
* called as close as possible to 500 ms before the new second starts.
* This code is run on a timer. If the clock is set, that timer
* may not expire at the correct time. Thus, we adjust...
+ * We want the clock to be within a couple of ticks from the target.
*/
if (!ntp_synced()) {
/*
@@ -485,7 +486,7 @@ static void sync_cmos_clock(struct work_struct *work)
}
getnstimeofday(&now);
- if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2) {
+ if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec * 5) {
struct timespec adjust = now;
fail = -ENODEV;
--
1.7.9.5

80
rt2800-add-support-for-rf3070.patch
View File

@ -1,80 +0,0 @@
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index d78c495..2132830 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -65,6 +65,7 @@
#define RF3021 0x0007
#define RF3022 0x0008
#define RF3052 0x0009
+#define RF3070 0x3070
#define RF2853 0x000a
#define RF3320 0x000b
#define RF3322 0x000c
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 1b41c8e..2958265 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2597,6 +2597,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
case RF3322:
rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
break;
+ case RF3070:
case RF5360:
case RF5370:
case RF5372:
@@ -2611,7 +2612,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
}
- if (rt2x00_rf(rt2x00dev, RF3290) ||
+ if (rt2x00_rf(rt2x00dev, RF3070) ||
+ rt2x00_rf(rt2x00dev, RF3290) ||
rt2x00_rf(rt2x00dev, RF3322) ||
rt2x00_rf(rt2x00dev, RF5360) ||
rt2x00_rf(rt2x00dev, RF5370) ||
@@ -3219,6 +3221,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
break;
+ case RF3070:
case RF3290:
case RF5360:
case RF5370:
@@ -5731,6 +5734,7 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
case RF3021:
case RF3022:
case RF3052:
+ case RF3070:
case RF3290:
case RF3320:
case RF3322:
@@ -6186,6 +6190,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_rf(rt2x00dev, RF2020) ||
rt2x00_rf(rt2x00dev, RF3021) ||
rt2x00_rf(rt2x00dev, RF3022) ||
+ rt2x00_rf(rt2x00dev, RF3070) ||
rt2x00_rf(rt2x00dev, RF3290) ||
rt2x00_rf(rt2x00dev, RF3320) ||
rt2x00_rf(rt2x00dev, RF3322) ||
@@ -6219,10 +6224,11 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize HT information.
*/
- if (!rt2x00_rf(rt2x00dev, RF2020))
+ if (!rt2x00_rf(rt2x00dev, RF2020)) {
spec->ht.ht_supported = true;
- else
+ } else {
spec->ht.ht_supported = false;
+ }
spec->ht.cap =
IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
@@ -6290,6 +6296,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
case RF3022:
case RF3320:
case RF3052:
+ case RF3070:
case RF3290:
case RF5360:
case RF5370:

53
rt2800usb-slow-down-TX-status-polling.patch
View File

@ -1,53 +0,0 @@
Polling TX statuses too frequently has two negative effects. First is
randomly peek CPU usage, causing overall system functioning delays.
Second bad effect is that device is not able to fill TX statuses in
H/W register on some workloads and we get lot of timeouts like below:
ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy4: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
This not only cause flood of messages in dmesg, but also bad throughput,
since rate scaling algorithm can not work optimally.
In the future, we should probably make polling interval be adjusted
automatically, but for now just increase values, this make mentioned
problems gone.
Resolve:
https://bugzilla.kernel.org/show_bug.cgi?id=62781
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/rt2x00/rt2800usb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 96677ce5..e095e61 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -176,8 +176,8 @@ static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
if (rt2800usb_txstatus_pending(rt2x00dev)) {
- /* Read register after 250 us */
- hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 250000),
+ /* Read register after 1 ms */
+ hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 1000000),
HRTIMER_MODE_REL);
return false;
}
@@ -202,8 +202,8 @@ static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
return;
- /* Read TX_STA_FIFO register after 500 us */
- hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 500000),
+ /* Read TX_STA_FIFO register after 2 ms */
+ hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 2000000),
HRTIMER_MODE_REL);
}
--
1.8.3.1

16
silence-noise.patch
View File

@ -7,27 +7,19 @@ Some systems, such as EFI-based Apple systems, won't necessarily have an
i8042 to initialize. We shouldn't be printing an error message in this
case, since not detecting the chip is the correct behavior.
---
drivers/input/serio/i8042.c | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 170f71e..4f3e632 100644
index 52c9ebf..c374a96 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -701,10 +701,8 @@ static int __devinit i8042_check_aux(void)
@@ -855,7 +855,6 @@ static int __init i8042_check_aux(void)
static int i8042_controller_check(void)
{
- if (i8042_flush() == I8042_BUFFER_SIZE) {
if (i8042_flush()) {
- pr_err("No controller found\n");
+ if (i8042_flush() == I8042_BUFFER_SIZE)
return -ENODEV;
- }
return 0;
}
--
1.6.0.1
Socket fuzzers like sfuzz will trigger this printk a lot, even though it's
ratelimited. It isn't particularly useful, so just remove it.

71
slab_common-Do-not-check-for-duplicate-slab-names.patch
View File

@ -1,71 +0,0 @@
Bugzilla: 1031086
Upstream-status: 3.12
From cd8fa0170867ce6e6e2d7edba1dc1a0b87485854 Mon Sep 17 00:00:00 2001
From: Christoph Lameter <cl@linux.com>
Date: Sat, 21 Sep 2013 21:56:34 +0000
Subject: [PATCH] slab_common: Do not check for duplicate slab names
SLUB can alias multiple slab kmem_create_requests to one slab cache to save
memory and increase the cache hotness. As a result the name of the slab can be
stale. Only check the name for duplicates if we are in debug mode where we do
not merge multiple caches.
This fixes the following problem reported by Jonathan Brassow:
The problem with kmem_cache* is this:
*) Assume CONFIG_SLUB is set
1) kmem_cache_create(name="foo-a")
- creates new kmem_cache structure
2) kmem_cache_create(name="foo-b")
- If identical cache characteristics, it will be merged with the previously
created cache associated with "foo-a". The cache's refcount will be
incremented and an alias will be created via sysfs_slab_alias().
3) kmem_cache_destroy(<ptr>)
- Attempting to destroy cache associated with "foo-a", but instead the
refcount is simply decremented. I don't even think the sysfs aliases are
ever removed...
4) kmem_cache_create(name="foo-a")
- This FAILS because kmem_cache_sanity_check colides with the existing
name ("foo-a") associated with the non-removed cache.
This is a problem for RAID (specifically dm-raid) because the name used
for the kmem_cache_create is ("raid%d-%p", level, mddev). If the cache
persists for long enough, the memory address of an old mddev will be
reused for a new mddev - causing an identical formulation of the cache
name. Even though kmem_cache_destory had long ago been used to delete
the old cache, the merging of caches has cause the name and cache of that
old instance to be preserved and causes a colision (and thus failure) in
kmem_cache_create(). I see this regularly in my testing.
Reported-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
---
mm/slab_common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 538bade..d434771 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -55,6 +55,7 @@ static int kmem_cache_sanity_check(struct mem_cgroup *memcg, const char *name,
continue;
}
+#if !defined(CONFIG_SLUB) || !defined(CONFIG_SLUB_DEBUG_ON)
/*
* For simplicity, we won't check this in the list of memcg
* caches. We have control over memcg naming, and if there
@@ -68,6 +69,7 @@ static int kmem_cache_sanity_check(struct mem_cgroup *memcg, const char *name,
s = NULL;
return -EINVAL;
}
+#endif
}
WARN_ON(strchr(name, ' ')); /* It confuses parsers */
--
1.8.3.1

4
sources
View File

@ -1,2 +1,2 @@
fea363551ff45fbe4cb88497b863b261 linux-3.11.tar.xz
c918da07cf5ad4240945ae56c4de3bc0 patch-3.11.10.xz
cc6ee608854e0da4b64f6c1ff8b6398c linux-3.12.tar.xz
70e456d21f7e7c0dc2f9bd170f1ae4ee patch-3.12.5.xz

45
sunrpc-replace-gssd_running-with-more-reliable-check.patch
View File

@ -14,16 +14,19 @@ extraneous newline from the message.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
Fixed up to apply to 3.12.1 by Josh Boyer <jwboyer@fedoraproject.org>
include/linux/sunrpc/rpc_pipe_fs.h | 2 ++
net/sunrpc/auth_gss/auth_gss.c | 17 +++++++----------
net/sunrpc/netns.h | 2 --
net/sunrpc/rpc_pipe.c | 14 ++++++++++----
4 files changed, 19 insertions(+), 16 deletions(-)
diff -up linux-3.11.9-200.fc19.x86_64/include/linux/sunrpc/rpc_pipe_fs.h.orig linux-3.11.9-200.fc19.x86_64/include/linux/sunrpc/rpc_pipe_fs.h
--- linux-3.11.9-200.fc19.x86_64/include/linux/sunrpc/rpc_pipe_fs.h.orig 2013-11-21 10:11:17.893026000 -0500
+++ linux-3.11.9-200.fc19.x86_64/include/linux/sunrpc/rpc_pipe_fs.h 2013-11-21 10:14:17.709348000 -0500
@@ -94,5 +94,7 @@ extern int rpc_unlink(struct dentry *);
diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h
index 85f1342..7f490be 100644
--- a/include/linux/sunrpc/rpc_pipe_fs.h
+++ b/include/linux/sunrpc/rpc_pipe_fs.h
@@ -131,5 +131,7 @@ extern int rpc_unlink(struct dentry *);
extern int register_rpc_pipefs(void);
extern void unregister_rpc_pipefs(void);
@ -31,10 +34,11 @@ diff -up linux-3.11.9-200.fc19.x86_64/include/linux/sunrpc/rpc_pipe_fs.h.orig li
+
#endif
#endif
diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c.orig linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c
--- linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c.orig 2013-09-02 16:46:10.000000000 -0400
+++ linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c 2013-11-21 10:18:33.681923000 -0500
@@ -507,8 +507,7 @@ static void warn_gssd(void)
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 0846566..1ada878 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -517,8 +517,7 @@ static void warn_gssd(void)
unsigned long now = jiffies;
if (time_after(now, ratelimit)) {
@ -44,7 +48,7 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c.orig linux-
ratelimit = now + 15*HZ;
}
}
@@ -571,7 +570,6 @@ gss_create_upcall(struct gss_auth *gss_a
@@ -581,7 +580,6 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred)
struct rpc_pipe *pipe;
struct rpc_cred *cred = &gss_cred->gc_base;
struct gss_upcall_msg *gss_msg;
@ -52,7 +56,7 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c.orig linux-
DEFINE_WAIT(wait);
int err;
@@ -579,17 +577,16 @@ gss_create_upcall(struct gss_auth *gss_a
@@ -589,17 +587,16 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred)
__func__, from_kuid(&init_user_ns, cred->cr_uid));
retry:
err = 0;
@ -65,7 +69,7 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c.orig linux-
+ warn_gssd();
+ return -EACCES;
+ }
gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred);
gss_msg = gss_setup_upcall(gss_auth, cred);
if (PTR_ERR(gss_msg) == -EAGAIN) {
err = wait_event_interruptible_timeout(pipe_version_waitqueue,
- sn->pipe_version >= 0, timeout);
@ -76,9 +80,10 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/auth_gss/auth_gss.c.orig linux-
warn_gssd();
err = -EACCES;
}
diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/netns.h.orig linux-3.11.9-200.fc19.x86_64/net/sunrpc/netns.h
--- linux-3.11.9-200.fc19.x86_64/net/sunrpc/netns.h.orig 2013-11-21 10:11:17.897029000 -0500
+++ linux-3.11.9-200.fc19.x86_64/net/sunrpc/netns.h 2013-11-21 10:14:17.722351000 -0500
diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h
index 8a8e841..94e506f 100644
--- a/net/sunrpc/netns.h
+++ b/net/sunrpc/netns.h
@@ -33,8 +33,6 @@ struct sunrpc_net {
int pipe_version;
atomic_t pipe_users;
@ -88,9 +93,10 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/netns.h.orig linux-3.11.9-200.f
};
extern int sunrpc_net_id;
diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/rpc_pipe.c.orig linux-3.11.9-200.fc19.x86_64/net/sunrpc/rpc_pipe.c
--- linux-3.11.9-200.fc19.x86_64/net/sunrpc/rpc_pipe.c.orig 2013-11-21 10:11:17.903026000 -0500
+++ linux-3.11.9-200.fc19.x86_64/net/sunrpc/rpc_pipe.c 2013-11-21 10:14:17.727348000 -0500
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 40aef18..ad444f3 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -216,14 +216,11 @@ rpc_destroy_inode(struct inode *inode)
static int
rpc_pipe_open(struct inode *inode, struct file *filp)
@ -106,7 +112,7 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/rpc_pipe.c.orig linux-3.11.9-20
pipe = RPC_I(inode)->pipe;
if (pipe == NULL)
goto out;
@@ -1082,7 +1079,6 @@ int rpc_pipefs_init_net(struct net *net)
@@ -1231,7 +1228,6 @@ int rpc_pipefs_init_net(struct net *net)
return PTR_ERR(sn->gssd_dummy);
mutex_init(&sn->pipefs_sb_lock);
@ -114,7 +120,7 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/rpc_pipe.c.orig linux-3.11.9-20
sn->pipe_version = -1;
return 0;
}
@@ -1236,6 +1232,16 @@ err_depopulate:
@@ -1385,6 +1381,16 @@ err_depopulate:
return err;
}
@ -131,4 +137,3 @@ diff -up linux-3.11.9-200.fc19.x86_64/net/sunrpc/rpc_pipe.c.orig linux-3.11.9-20
static struct dentry *
rpc_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)

15
taint-vbox.patch
View File

@ -1,15 +0,0 @@
diff --git a/kernel/module.c b/kernel/module.c
index 921bed4..382414e 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2873,6 +2873,10 @@ static int check_module_license_and_versions(struct module *mod)
if (strcmp(mod->name, "ndiswrapper") == 0)
add_taint(TAINT_PROPRIETARY_MODULE, LOCKDEP_NOW_UNRELIABLE);
+ /* vbox is garbage. */
+ if (strcmp(mod->name, "vboxdrv") == 0)
+ add_taint(TAINT_CRAP, LOCKDEP_NOW_UNRELIABLE);
+
/* driverloader was caught wrongly pretending to be under GPL */
if (strcmp(mod->name, "driverloader") == 0)
add_taint_module(mod, TAINT_PROPRIETARY_MODULE,

37
usbnet-fix-status-interrupt-urb-handling.patch
View File

@ -1,37 +0,0 @@
From 52f48d0d9aaa621ffa5e08d79da99a3f8c93b848 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 12 Nov 2013 16:34:41 +0100
Subject: [PATCH] usbnet: fix status interrupt urb handling
Since commit 7b0c5f21f348a66de495868b8df0284e8dfd6bbf
"sierra_net: keep status interrupt URB active", sierra_net triggers
status interrupt polling before the net_device is opened (in order to
properly receive the sync message response).
To be able to receive further interrupts, the interrupt urb needs to be
re-submitted, so this patch removes the bogus check for netif_running().
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Tested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/usb/usbnet.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 90a429b..8494bb5 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -204,9 +204,6 @@ static void intr_complete (struct urb *urb)
break;
}
- if (!netif_running (dev->net))
- return;
-
status = usb_submit_urb (urb, GFP_ATOMIC);
if (status != 0)
netif_err(dev, timer, dev->net,
--
1.8.3.1

0
v4l-dvb-experimental.patch
View File

0
v4l-dvb-fixes.patch
View File

0
v4l-dvb-update.patch
View File

39
vfio-iommu-Fixed-interaction-of-VFIO_IOMMU_MAP_DMA.patch
View File

@ -1,39 +0,0 @@
From: Julian Stecklina <jsteckli@os.info.tu-dresden.de>
Subject: [PATCH] vfio, iommu: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits
The BUG_ON in drivers/iommu/intel-iommu.c:785 can be triggered from userspace via
VFIO by calling the VFIO_IOMMU_MAP_DMA ioctl on a vfio device with any address
beyond the addressing capabilities of the IOMMU. The problem is that the ioctl code
calls iommu_iova_to_phys before it calls iommu_map. iommu_map handles the case that
it gets addresses beyond the addressing capabilities of its IOMMU.
intel_iommu_iova_to_phys does not.
This patch fixes iommu_iova_to_phys to return NULL for addresses beyond what the
IOMMU can handle. This in turn causes the ioctl call to fail in iommu_map and
(correctly) return EFAULT to the user with a helpful warning message in the kernel
log.
Signed-off-by: Julian Stecklina <jsteckli@os.inf.tu-dresden.de>
---
drivers/iommu/intel-iommu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index eec0d3e..61303db 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -782,7 +782,11 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
int offset;
BUG_ON(!domain->pgd);
- BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
+
+ if (addr_width < BITS_PER_LONG && pfn >> addr_width)
+ /* Address beyond IOMMU's addressing capabilities. */
+ return NULL;
+
parent = domain->pgd;
while (level > 0) {
--
1.8.3.1

121
via-velocity-fix-netif_receive_skb-use-in-irq-disable.patch
View File

@ -1,121 +0,0 @@
Bugzilla: 1022733
Upstream: Submitted for 3.13 and 3.12.y stable
Delivered-To: jwboyer@gmail.com
Received: by 10.76.104.107 with SMTP id gd11csp116929oab;
Mon, 25 Nov 2013 15:45:36 -0800 (PST)
X-Received: by 10.68.254.105 with SMTP id ah9mr20726084pbd.87.1385423136297;
Mon, 25 Nov 2013 15:45:36 -0800 (PST)
Return-Path: <netdev-owner@vger.kernel.org>
Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67])
by mx.google.com with ESMTP id am2si28999873pad.96.2013.11.25.15.44.53
for <multiple recipients>;
Mon, 25 Nov 2013 15:45:36 -0800 (PST)
Received-SPF: pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Authentication-Results: mx.google.com;
spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mail=netdev-owner@vger.kernel.org
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
id S1753536Ab3KYXl6 (ORCPT <rfc822;lnxuff@gmail.com> + 99 others);
Mon, 25 Nov 2013 18:41:58 -0500
Received: from violet.fr.zoreil.com ([92.243.8.30]:57806 "EHLO
violet.fr.zoreil.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
with ESMTP id S1751913Ab3KYXlz (ORCPT
<rfc822;netdev@vger.kernel.org>); Mon, 25 Nov 2013 18:41:55 -0500
Received: from violet.fr.zoreil.com (localhost [127.0.0.1])
by violet.fr.zoreil.com (8.14.5/8.14.5) with ESMTP id rAPNewrt012676;
Tue, 26 Nov 2013 00:40:58 +0100
Received: (from romieu@localhost)
by violet.fr.zoreil.com (8.14.5/8.14.5/Submit) id rAPNewbX012675;
Tue, 26 Nov 2013 00:40:58 +0100
Date: Tue, 26 Nov 2013 00:40:58 +0100
From: Francois Romieu <romieu@fr.zoreil.com>
To: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>,
"Alex A. Schmidt" <aaschmidt1@gmail.com>,
Michele Baldessari <michele@acksyn.org>,
Jamie Heilman <jamie@audible.transient.net>,
Julia Lawall <Julia.Lawall@lip6.fr>
Subject: [PATCH net 1/1] via-velocity: fix netif_receive_skb use in irq
disabled section.
Message-ID: <20131125234058.GA12566@electric-eye.fr.zoreil.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
X-Organisation: Land of Sunshine Inc.
User-Agent: Mutt/1.5.21 (2010-09-15)
Sender: netdev-owner@vger.kernel.org
Precedence: bulk
List-ID: <netdev.vger.kernel.org>
X-Mailing-List: netdev@vger.kernel.org
2fdac010bdcf10a30711b6924612dfc40daf19b8 ("via-velocity.c: update napi
implementation") overlooked an irq disabling spinlock when the Rx part
of the NAPI poll handler was converted from netif_rx to netif_receive_skb.
NAPI Rx processing can be taken out of the locked section with a pair of
napi_{disable / enable} since it only races with the MTU change function.
An heavier rework of the NAPI locking would be able to perform NAPI Tx
before Rx where I simply removed one of velocity_tx_srv calls.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1022733
Fixes: 2fdac010bdcf (via-velocity.c: update napi implementation)
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Alex A. Schmidt <aaschmidt1@gmail.com>
Cc: Jamie Heilman <jamie@audible.transient.net>
Cc: Michele Baldessari <michele@acksyn.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
---
It is relevant for stable 3.11.x and 3.12.y.
drivers/net/ethernet/via/via-velocity.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index d022bf9..ad61d26 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -2172,16 +2172,13 @@ static int velocity_poll(struct napi_struct *napi, int budget)
unsigned int rx_done;
unsigned long flags;
- spin_lock_irqsave(&vptr->lock, flags);
/*
* Do rx and tx twice for performance (taken from the VIA
* out-of-tree driver).
*/
- rx_done = velocity_rx_srv(vptr, budget / 2);
- velocity_tx_srv(vptr);
- rx_done += velocity_rx_srv(vptr, budget - rx_done);
+ rx_done = velocity_rx_srv(vptr, budget);
+ spin_lock_irqsave(&vptr->lock, flags);
velocity_tx_srv(vptr);
-
/* If budget not fully consumed, exit the polling mode */
if (rx_done < budget) {
napi_complete(napi);
@@ -2342,6 +2339,8 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu)
if (ret < 0)
goto out_free_tmp_vptr_1;
+ napi_disable(&vptr->napi);
+
spin_lock_irqsave(&vptr->lock, flags);
netif_stop_queue(dev);
@@ -2362,6 +2361,8 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu)
velocity_give_many_rx_descs(vptr);
+ napi_enable(&vptr->napi);
+
mac_enable_int(vptr->mac_regs);
netif_start_queue(dev);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

20
vmbugon-warnon.patch
View File

@ -1,20 +0,0 @@
diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h
index 580bd58..3d908e9 100644
--- a/include/linux/mmdebug.h
+++ b/include/linux/mmdebug.h
@@ -2,13 +2,13 @@
#define LINUX_MM_DEBUG_H 1
#ifdef CONFIG_DEBUG_VM
-#define VM_BUG_ON(cond) BUG_ON(cond)
+#define VM_BUG_ON(cond) WARN_ON(cond)
#else
#define VM_BUG_ON(cond) BUILD_BUG_ON_INVALID(cond)
#endif
#ifdef CONFIG_DEBUG_VIRTUAL
-#define VIRTUAL_BUG_ON(cond) BUG_ON(cond)
+#define VIRTUAL_BUG_ON(cond) WARN_ON(cond)
#else
#define VIRTUAL_BUG_ON(cond) do { } while (0)
#endif

13
x86-allow-1024-cpus.patch Normal file
View File

@ -0,0 +1,13 @@
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f67e839..d726b2d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -825,7 +825,7 @@ config MAXSMP
config NR_CPUS
int "Maximum number of CPUs" if SMP && !MAXSMP
range 2 8 if SMP && X86_32 && !X86_BIGSMP
- range 2 512 if SMP && !MAXSMP
+ range 2 1024 if SMP && !MAXSMP
default "1" if !SMP
default "4096" if MAXSMP
default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)