diff --git a/bcm283x-upstream-fixes.patch b/bcm283x-upstream-fixes.patch new file mode 100644 index 000000000..d8bb87ca0 --- /dev/null +++ b/bcm283x-upstream-fixes.patch @@ -0,0 +1,400 @@ +From 41135d2ce60509e53306e5b76afab98ddc15951b Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 2 Mar 2015 14:36:16 -0800 +Subject: [PATCH 26/36] ARM: bcm2835: Add VC4 to the device tree. + +VC4 is the GPU (display and 3D) present on the 283x. + +v2: Sort by register address, mark HDMI as disabled by default in the + SoC file and enable it from -rpi. +v3: Add references to the pixel/HSM clocks for HDMI. Rename + compatibility strings and clean up node names. +v4: Fix comment marking pv0's interrupt as pwa2 instead of pwa0. + Rename hpd-gpio to hpd-gpios. +v5: Rebase on bcm283x.dtsi change, add v3d. +v6: Make HDMI reference the power domain. +v7: Fix the HDMI HPD gpios active value and HDMI enable for each RPI + board. Change V3D compatible string to 2835. + +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 4 +++ + arch/arm/boot/dts/bcm2835-rpi-a.dts | 4 +++ + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 4 +++ + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 4 +++ + arch/arm/boot/dts/bcm2835-rpi-b.dts | 4 +++ + arch/arm/boot/dts/bcm2835-rpi.dtsi | 9 ++++++ + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 4 +++ + arch/arm/boot/dts/bcm283x.dtsi | 47 ++++++++++++++++++++++++++++++++ + 8 files changed, 80 insertions(+) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +index 228614f..35ff4e7a 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +@@ -29,3 +29,7 @@ + brcm,function = ; + }; + }; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts +index ddbbbbd..306a84e 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts +@@ -22,3 +22,7 @@ + brcm,function = ; + }; + }; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +index ef54050..57d313b 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +@@ -29,3 +29,7 @@ + brcm,function = ; + }; + }; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +index 86f1f2f..cf2774e 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +@@ -22,3 +22,7 @@ + brcm,function = ; + }; + }; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts +index 4859e9d..8b15f9c 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts +@@ -16,3 +16,7 @@ + &gpio { + pinctrl-0 = <&gpioout &alt0 &alt3>; + }; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index 76bdbca..caf2707 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -74,3 +74,12 @@ + &usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; + }; ++ ++&v3d { ++ power-domains = <&power RPI_POWER_DOMAIN_V3D>; ++}; ++ ++&hdmi { ++ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; ++ status = "okay"; ++}; +diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +index ff94666..c4743f4 100644 +--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +@@ -33,3 +33,7 @@ + brcm,function = ; + }; + }; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index fc67964..bbe4eab 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -1,6 +1,7 @@ + #include + #include + #include ++#include + #include "skeleton.dtsi" + + /* This include file covers the common peripherals and configuration between +@@ -153,6 +154,18 @@ + status = "disabled"; + }; + ++ pixelvalve@7e206000 { ++ compatible = "brcm,bcm2835-pixelvalve0"; ++ reg = <0x7e206000 0x100>; ++ interrupts = <2 13>; /* pwa0 */ ++ }; ++ ++ pixelvalve@7e207000 { ++ compatible = "brcm,bcm2835-pixelvalve1"; ++ reg = <0x7e207000 0x100>; ++ interrupts = <2 14>; /* pwa1 */ ++ }; ++ + aux: aux@0x7e215000 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; +@@ -206,6 +219,12 @@ + status = "disabled"; + }; + ++ hvs@7e400000 { ++ compatible = "brcm,bcm2835-hvs"; ++ reg = <0x7e400000 0x6000>; ++ interrupts = <2 1>; ++ }; ++ + i2c1: i2c@7e804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; +@@ -226,11 +245,39 @@ + status = "disabled"; + }; + ++ pixelvalve@7e807000 { ++ compatible = "brcm,bcm2835-pixelvalve2"; ++ reg = <0x7e807000 0x100>; ++ interrupts = <2 10>; /* pixelvalve */ ++ }; ++ ++ hdmi: hdmi@7e902000 { ++ compatible = "brcm,bcm2835-hdmi"; ++ reg = <0x7e902000 0x600>, ++ <0x7e808000 0x100>; ++ interrupts = <2 8>, <2 9>; ++ ddc = <&i2c2>; ++ clocks = <&clocks BCM2835_PLLH_PIX>, ++ <&clocks BCM2835_CLOCK_HSM>; ++ clock-names = "pixel", "hdmi"; ++ status = "disabled"; ++ }; ++ + usb: usb@7e980000 { + compatible = "brcm,bcm2835-usb"; + reg = <0x7e980000 0x10000>; + interrupts = <1 9>; + }; ++ ++ v3d: v3d@7ec00000 { ++ compatible = "brcm,bcm2835-v3d"; ++ reg = <0x7ec00000 0x1000>; ++ interrupts = <1 10>; ++ }; ++ ++ vc4: gpu { ++ compatible = "brcm,bcm2835-vc4"; ++ }; + }; + + clocks { +-- +2.7.3 + +From da77f737f9f5a487f3a1f80f8546585ee18cd7b9 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 4 Mar 2016 10:39:28 -0800 +Subject: [PATCH 27/36] dt-bindings: Add root properties for Raspberry Pi 3 + +Signed-off-by: Eric Anholt +Acked-by: Rob Herring +--- + Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +index 11d3056..6ffe087 100644 +--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt ++++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B + Required root node properties: + compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; + ++Raspberry Pi 3 Model B ++Required root node properties: ++compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ++ + Raspberry Pi Compute Module + Required root node properties: + compatible = "raspberrypi,compute-module", "brcm,bcm2835"; +-- +2.7.3 + +From b76b1cdf2e569cceab41dcf3b3f6a90965d0a02c Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 4 Mar 2016 10:39:29 -0800 +Subject: [PATCH 28/36] ARM: bcm2835: Add devicetree for the Raspberry Pi 3. + +For now this doesn't support the new hardware present on the Pi 3 (BT, +wifi, GPIO expander). Since the GPIO expander isn't supported, we +also don't have the LEDs like the other board files do. + +Signed-off-by: Eric Anholt +Acked-by: Stephen Warren +--- + arch/arm/boot/dts/Makefile | 3 +- + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 22 ++++++++++++ + arch/arm/boot/dts/bcm2837.dtsi | 68 +++++++++++++++++++++++++++++++++++ + 3 files changed, 92 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts + create mode 100644 arch/arm/boot/dts/bcm2837.dtsi + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index d000814..a8a0767 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2835-rpi-b-rev2.dtb \ + bcm2835-rpi-b-plus.dtb \ + bcm2835-rpi-a-plus.dtb \ +- bcm2836-rpi-2-b.dtb ++ bcm2836-rpi-2-b.dtb \ ++ bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ +diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +new file mode 100644 +index 0000000..5e8eafd +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +@@ -0,0 +1,22 @@ ++/dts-v1/; ++#include "bcm2837.dtsi" ++#include "bcm2835-rpi.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ++ model = "Raspberry Pi 3 Model B"; ++ ++ memory { ++ reg = <0 0x40000000>; ++ }; ++}; ++ ++&gpio { ++ pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; ++ ++ /* I2S interface */ ++ i2s_alt0: i2s_alt0 { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = ; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi +new file mode 100644 +index 0000000..2f36722 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2837.dtsi +@@ -0,0 +1,68 @@ ++#include "bcm283x.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2836"; ++ ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x1000000>, ++ <0x40000000 0x40000000 0x00001000>; ++ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; ++ ++ local_intc: local_intc { ++ compatible = "brcm,bcm2836-l1-intc"; ++ reg = <0x40000000 0x100>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ interrupt-parent = <&local_intc>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv7-timer"; ++ interrupt-parent = <&local_intc>; ++ interrupts = <0>, // PHYS_SECURE_PPI ++ <1>, // PHYS_NONSECURE_PPI ++ <3>, // VIRT_PPI ++ <2>; // HYP_PPI ++ always-on; ++ }; ++ ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <1>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <2>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <3>; ++ }; ++ }; ++}; ++ ++/* Make the BCM2835-style global interrupt controller be a child of the ++ * CPU-local interrupt controller. ++ */ ++&intc { ++ compatible = "brcm,bcm2836-armctrl-ic"; ++ reg = <0x7e00b200 0x200>; ++ interrupt-parent = <&local_intc>; ++ interrupts = <8>; ++}; +-- +2.7.3 + +From 528285e99c25249456023d28f521689bf9e9eb8b Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Wed, 30 Mar 2016 09:35:13 +0100 +Subject: [PATCH 32/36] drop usb power domain support for the moment, kills usb + +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ---- + 1 file changed, 4 deletions(-) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index caf2707..b1e8145 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -71,10 +71,6 @@ + status = "okay"; + }; + +-&usb { +- power-domains = <&power RPI_POWER_DOMAIN_USB>; +-}; +- + &v3d { + power-domains = <&power RPI_POWER_DOMAIN_V3D>; + }; +-- +2.7.3 + diff --git a/kernel.spec b/kernel.spec index 9f2d141ea..20d3ee049 100644 --- a/kernel.spec +++ b/kernel.spec @@ -518,8 +518,7 @@ Patch431: Fix-tegra-to-use-stdout-path-for-serial-console.patch Patch432: arm-i.MX6-Utilite-device-dtb.patch -# mvebu DSA switch fixes -# http://www.spinics.net/lists/netdev/msg370841.html http://www.spinics.net/lists/netdev/msg370842.html +Patch433: bcm283x-upstream-fixes.patch Patch460: lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch @@ -2191,6 +2190,9 @@ fi # # %changelog +* Tue Jun 21 2016 Peter Robinson +- Update patch from 4.5 with missing bits for bcm238x support + * Mon Jun 20 2016 Hans de Goede - Bring in patch-series from drm-next to fix skl_update_other_pipe_wm issues (rhbz 1305038)