Merge remote-tracking branch 'up/master' into master-riscv64

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
This commit is contained in:
David Abdurachmanov 2019-08-24 15:46:48 -07:00
commit 0ebe98255d
Signed by: davidlt
GPG Key ID: 8B7F1DA0E2C9FDBB
310 changed files with 2065 additions and 5312 deletions

View File

@ -1,63 +0,0 @@
From b0b46a5b622fdbe69207675c5d50b77cb8ae43b7 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 5 Feb 2019 13:43:49 +0100
Subject: [PATCH] s390/jump_label: Correct asm contraint
On Tue, Jan 29, 2019 at 08:25:58AM +0100, Laura Abbott wrote:
> On 1/23/19 5:24 AM, Heiko Carstens wrote:
> >On Wed, Jan 23, 2019 at 01:55:13PM +0100, Laura Abbott wrote:
> >>There's a build failure with gcc9:
> >>
> >> ./arch/s390/include/asm/jump_label.h: Assembler messages:
> >> ./arch/s390/include/asm/jump_label.h:23: Error: bad expression
> >> ./arch/s390/include/asm/jump_label.h:23: Error: junk at end of line, first unrecognized character is `r'
> >> make[1]: *** [scripts/Makefile.build:277: init/main.o] Error 1
...
> I've had to turn off s390 in Fedora until this gets fixed :(
Laura, the patch below should fix this (temporarily). If possible,
could you give it a try? It seems to work for me.
rom 4067027c2ccc8d3f1dc3bb19fe2d00da0c65bcd8 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 5 Feb 2019 13:21:56 +0100
Subject: [PATCH] s390: disable section anchors
Disable section anchors to allow to compile with the current gcc 9
experimental version. The section anchors is a new feature for s390
with gcc 9, however it breaks our current usage of the 'X' constraint
within the asm goto construct within our jump label implementation.
Fixing this seems to be non-trivial, therefore (hopefully) temporarily
disable section anchors. We will hopefully have a better solution
before gcc 9 is released, so that this can be removed again.
Reported-by: Laura Abbott <labbott@redhat.com>
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
arch/s390/Makefile | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index e21053e5e0da..1eac75bc3a29 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -62,6 +62,14 @@ cflags-y += -Wa,-I$(srctree)/arch/$(ARCH)/include
#
cflags-$(CONFIG_FRAME_POINTER) += -fno-optimize-sibling-calls
+#
+# Disable section anchors. This gcc 9 feature currently breaks the 'X'
+# constraint like it is used in the asm goto construct.
+#
+ifeq ($(call cc-option-yn,-fno-section-anchors),y)
+cflags-y += -fno-section-anchors
+endif
+
ifeq ($(call cc-option-yn,-mpacked-stack),y)
cflags-$(CONFIG_PACK_STACK) += -mpacked-stack -D__PACK_STACK
aflags-$(CONFIG_PACK_STACK) += -D__PACK_STACK
--
2.20.1

View File

@ -470,173 +470,6 @@ index 61be15d9df7d..da26a584dca0 100644
-- --
2.21.0 2.21.0
From a94ed1abc52b51c55454b3f1a7181af9d91d9d73 Mon Sep 17 00:00:00 2001
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Date: Tue, 11 Jun 2019 19:58:40 +0200
Subject: [PATCH 4/5] cpufreq: add driver for Raspbery Pi
Raspberry Pi's firmware offers and interface though which update it's
performance requirements. It allows us to request for specific runtime
frequencies, which the firmware might or might not respect, depending on
the firmware configuration and thermals.
As the maximum and minimum frequencies are configurable in the firmware
there is no way to know in advance their values. So the Raspberry Pi
cpufreq driver queries them, builds an opp frequency table to then
launch cpufreq-dt.
Also, as the firmware interface might be configured as a module, making
the cpu clock unavailable during init, this implements a full fledged
driver, as opposed to most drivers registering cpufreq-dt, which only
make use of an init routine.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/cpufreq/Kconfig.arm | 8 +++
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/raspberrypi-cpufreq.c | 97 +++++++++++++++++++++++++++
3 files changed, 106 insertions(+)
create mode 100644 drivers/cpufreq/raspberrypi-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index f8129edc145e..5e9204d443ff 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -133,6 +133,14 @@ config ARM_QCOM_CPUFREQ_HW
The driver implements the cpufreq interface for this HW engine.
Say Y if you want to support CPUFreq HW.
+config ARM_RASPBERRYPI_CPUFREQ
+ tristate "Raspberry Pi cpufreq support"
+ depends on CLK_RASPBERRYPI || COMPILE_TEST
+ help
+ This adds the CPUFreq driver for Raspberry Pi
+
+ If in doubt, say N.
+
config ARM_S3C_CPUFREQ
bool
help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 689b26c6f949..121c1acb66c0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o
+obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
diff --git a/drivers/cpufreq/raspberrypi-cpufreq.c b/drivers/cpufreq/raspberrypi-cpufreq.c
new file mode 100644
index 000000000000..2bc7d9734272
--- /dev/null
+++ b/drivers/cpufreq/raspberrypi-cpufreq.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Raspberry Pi cpufreq driver
+ *
+ * Copyright (C) 2019, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+
+#define RASPBERRYPI_FREQ_INTERVAL 100000000
+
+static struct platform_device *cpufreq_dt;
+
+static int raspberrypi_cpufreq_probe(struct platform_device *pdev)
+{
+ struct device *cpu_dev;
+ unsigned long min, max;
+ unsigned long rate;
+ struct clk *clk;
+ int ret;
+
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ pr_err("Cannot get CPU for cpufreq driver\n");
+ return -ENODEV;
+ }
+
+ clk = clk_get(cpu_dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(cpu_dev, "Cannot get clock for CPU0\n");
+ return PTR_ERR(clk);
+ }
+
+ /*
+ * The max and min frequencies are configurable in the Raspberry Pi
+ * firmware, so we query them at runtime.
+ */
+ min = roundup(clk_round_rate(clk, 0), RASPBERRYPI_FREQ_INTERVAL);
+ max = roundup(clk_round_rate(clk, ULONG_MAX), RASPBERRYPI_FREQ_INTERVAL);
+ clk_put(clk);
+
+ for (rate = min; rate <= max; rate += RASPBERRYPI_FREQ_INTERVAL) {
+ ret = dev_pm_opp_add(cpu_dev, rate, 0);
+ if (ret)
+ goto remove_opp;
+ }
+
+ cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ ret = PTR_ERR_OR_ZERO(cpufreq_dt);
+ if (ret) {
+ dev_err(cpu_dev, "Failed to create platform device, %d\n", ret);
+ goto remove_opp;
+ }
+
+ return 0;
+
+remove_opp:
+ dev_pm_opp_remove_all_dynamic(cpu_dev);
+
+ return ret;
+}
+
+static int raspberrypi_cpufreq_remove(struct platform_device *pdev)
+{
+ struct device *cpu_dev;
+
+ cpu_dev = get_cpu_device(0);
+ if (cpu_dev)
+ dev_pm_opp_remove_all_dynamic(cpu_dev);
+
+ platform_device_unregister(cpufreq_dt);
+
+ return 0;
+}
+
+/*
+ * Since the driver depends on clk-raspberrypi, which may return EPROBE_DEFER,
+ * all the activity is performed in the probe, which may be defered as well.
+ */
+static struct platform_driver raspberrypi_cpufreq_driver = {
+ .driver = {
+ .name = "raspberrypi-cpufreq",
+ },
+ .probe = raspberrypi_cpufreq_probe,
+ .remove = raspberrypi_cpufreq_remove,
+};
+module_platform_driver(raspberrypi_cpufreq_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de");
+MODULE_DESCRIPTION("Raspberry Pi cpufreq driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:raspberrypi-cpufreq");
--
2.21.0
From af32d83d10976ff357c56adba79fa3cb06e1c32d Mon Sep 17 00:00:00 2001 From af32d83d10976ff357c56adba79fa3cb06e1c32d Mon Sep 17 00:00:00 2001
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Date: Tue, 11 Jun 2019 19:58:42 +0200 Date: Tue, 11 Jun 2019 19:58:42 +0200

View File

@ -0,0 +1,31 @@
From 19908e5fe3e63ed2d39f0a8a9135f35fd428d766 Mon Sep 17 00:00:00 2001
From: Jon Masters <jcm@redhat.com>
Date: Thu, 18 Jul 2019 15:47:26 -0400
Subject: [PATCH] arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
We will use this to force CONFIG_HIGHPTE off on LPAE for now
Signed-off-by: Jon Masters <jcm@redhat.com>
---
arch/arm/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2bf1ce39a96d..e792b3e60095 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1644,9 +1644,9 @@ config HIGHMEM
If unsure, say n.
config HIGHPTE
- bool "Allocate 2nd-level pagetables from highmem" if EXPERT
+ bool "Allocate 2nd-level pagetables from highmem"
depends on HIGHMEM
- default y
+ default n
help
The VM uses one page of physical memory for each page table.
For systems with a lot of processes, this can use a lot of
--
2.17.2

View File

@ -1,41 +0,0 @@
From a7edc17544709d20f800dc0898096365a3d68613 Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date: Sun, 2 Jun 2019 16:36:15 +0200
Subject: [PATCH] acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
Some Qualcomm Snapdragon based laptops built to run Microsoft Windows
are clearly ACPI 5.1 based, given that that is the first ACPI revision
that supports ARM, and introduced the FADT 'arm_boot_flags' field,
which has a non-zero field on those systems.
So in these cases, infer from the ARM boot flags that the FADT must be
5.1 or later, and treat it as 5.1.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/acpi.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 803f0494dd3e3..7722e85fb69c3 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -155,10 +155,14 @@ static int __init acpi_fadt_sanity_check(void)
*/
if (table->revision < 5 ||
(table->revision == 5 && fadt->minor_revision < 1)) {
- pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n",
+ pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",
table->revision, fadt->minor_revision);
- ret = -EINVAL;
- goto out;
+
+ if (!fadt->arm_boot_flags) {
+ ret = -EINVAL;
+ goto out;
+ }
+ pr_err("FADT has ARM boot flags set, assuming 5.1\n");
}
if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) {

View File

@ -1,30 +0,0 @@
From 7b87bc98ab598ae40ef1818fb0c420d61dd87ed1 Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date: Mon, 3 Jun 2019 08:37:11 +0200
Subject: [PATCH] acpi: make AC and battery drivers available on !X86
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/acpi/Kconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index e016f7a6ed136..3c8011e7b0d7c 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -155,7 +155,6 @@ config ACPI_EC_DEBUGFS
config ACPI_AC
tristate "AC Adapter"
- depends on X86
select POWER_SUPPLY
default y
help
@@ -168,7 +167,6 @@ config ACPI_AC
config ACPI_BATTERY
tristate "Battery"
- depends on X86
select POWER_SUPPLY
default y
help

View File

@ -1,293 +0,0 @@
From 0ab5b9df0c9f07ae747ddc678d4e423c42f69624 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:06 +0100
Subject: [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI
Add a match table to allow automatic probing of ACPI device
QCOM0220. Ignore clock attainment errors. Set default clock
frequency value.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index db075bc0d952..9e3b8a98688d 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
@@ -483,6 +484,14 @@ static const struct i2c_algorithm geni_i2c_algo = {
.functionality = geni_i2c_func,
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id geni_i2c_acpi_match[] = {
+ { "QCOM0220"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match);
+#endif
+
static int geni_i2c_probe(struct platform_device *pdev)
{
struct geni_i2c_dev *gi2c;
@@ -502,7 +511,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
return PTR_ERR(gi2c->se.base);
gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
- if (IS_ERR(gi2c->se.clk)) {
+ if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
ret = PTR_ERR(gi2c->se.clk);
dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
return ret;
@@ -516,6 +525,9 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->clk_freq_out = KHZ(100);
}
+ if (has_acpi_companion(&pdev->dev))
+ ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
+
gi2c->irq = platform_get_irq(pdev, 0);
if (gi2c->irq < 0) {
dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
@@ -660,6 +672,7 @@ static struct platform_driver geni_i2c_driver = {
.name = "geni_i2c",
.pm = &geni_i2c_pm_ops,
.of_match_table = geni_i2c_dt_match,
+ .acpi_match_table = ACPI_PTR(geni_i2c_acpi_match),
},
};
--
2.21.0
From 5a0639fed6e05977d85c4824354e73d0a2fa92ef Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:07 +0100
Subject: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
The Qualcomm Geni I2C driver currently probes silently which can be
confusing when debugging potential issues. Add a low level (INFO)
print when each I2C controller is successfully initially set-up.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 9e3b8a98688d..a89bfce5388e 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -596,6 +596,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
return ret;
}
+ dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
+
return 0;
}
--
2.21.0
From 6f202eb6dbccf3172616a620faf934bf6195a0f9 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:08 +0100
Subject: [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a
reserved GPIO list
When booting MSM based platforms with Device Tree or some ACPI
implementations, it is possible to provide a list of reserved pins
via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
However some ACPI tables are not populated with this information,
thus it has to come from a knowledgable device driver instead.
Here we provide the MSM common driver with additional support to
parse this informtion and correctly populate the widely used
'valid_mask'.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 18 ++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-msm.h | 1 +
2 files changed, 19 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 6e319bcc2326..80682b017a47 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -599,8 +599,23 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip)
int ret;
unsigned int len, i;
unsigned int max_gpios = pctrl->soc->ngpios;
+ const int *reserved = pctrl->soc->reserved_gpios;
u16 *tmp;
+ /* Driver provided reserved list overrides DT and ACPI */
+ if (reserved) {
+ bitmap_fill(chip->valid_mask, max_gpios);
+ for (i = 0; reserved[i] >= 0; i++) {
+ if (i >= max_gpios || reserved[i] >= max_gpios) {
+ dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
+ return -EINVAL;
+ }
+ clear_bit(reserved[i], chip->valid_mask);
+ }
+
+ return 0;
+ }
+
/* The number of GPIOs in the ACPI tables */
len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL,
0);
@@ -956,6 +971,9 @@ static void msm_gpio_irq_handler(struct irq_desc *desc)
static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
{
+ if (pctrl->soc->reserved_gpios)
+ return true;
+
return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0;
}
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index b724581c605c..48569cda8471 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -113,6 +113,7 @@ struct msm_pinctrl_soc_data {
bool pull_no_keeper;
const char *const *tiles;
unsigned int ntiles;
+ const int *reserved_gpios;
};
extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
--
2.21.0
From 568ff4c9723d761164416fdf876232f5b14cf3ad Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Mon, 10 Jun 2019 09:42:09 +0100
Subject: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
This patch provides basic support for booting with ACPI instead
of the currently supported Device Tree. When doing so there are a
couple of differences which we need to taken into consideration.
Firstly, the SDM850 ACPI tables omit information pertaining to the
4 reserved GPIOs on the platform. If Linux attempts to touch/
initialise any of these lines, the firmware will restart the
platform.
Secondly, when booting with ACPI, it is expected that the firmware
will set-up things like; Regulators, Clocks, Pin Functions, etc in
their ideal configuration. Thus, the possible Pin Functions
available to this platform are not advertised when providing the
higher GPIOD/Pinctrl APIs with pin information.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
drivers/pinctrl/qcom/Kconfig | 2 +-
drivers/pinctrl/qcom/pinctrl-sdm845.c | 36 ++++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 890d0a3a790b..27ab585a639c 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -169,7 +169,7 @@ config PINCTRL_SDM660
config PINCTRL_SDM845
tristate "Qualcomm Technologies Inc SDM845 pin controller driver"
- depends on GPIOLIB && OF
+ depends on GPIOLIB && (OF || ACPI)
select PINCTRL_MSM
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c
index c97f20fca5fd..98a438dba711 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
@@ -3,6 +3,7 @@
* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -1277,6 +1278,10 @@ static const struct msm_pingroup sdm845_groups[] = {
UFS_RESET(ufs_reset, 0x99f000),
};
+static const int sdm845_acpi_reserved_gpios[] = {
+ 0, 1, 2, 3, 81, 82, 83, 84, -1
+};
+
static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.pins = sdm845_pins,
.npins = ARRAY_SIZE(sdm845_pins),
@@ -1287,11 +1292,39 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.ngpios = 150,
};
+static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
+ .pins = sdm845_pins,
+ .npins = ARRAY_SIZE(sdm845_pins),
+ .groups = sdm845_groups,
+ .ngroups = ARRAY_SIZE(sdm845_groups),
+ .reserved_gpios = sdm845_acpi_reserved_gpios,
+ .ngpios = 150,
+};
+
static int sdm845_pinctrl_probe(struct platform_device *pdev)
{
- return msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+ int ret;
+
+ if (pdev->dev.of_node) {
+ ret = msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+ } else if (has_acpi_companion(&pdev->dev)) {
+ ret = msm_pinctrl_probe(pdev, &sdm845_acpi_pinctrl);
+ } else {
+ dev_err(&pdev->dev, "DT and ACPI disabled\n");
+ return -EINVAL;
+ }
+
+ return ret;
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id sdm845_pinctrl_acpi_match[] = {
+ { "QCOM0217"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, sdm845_pinctrl_acpi_match);
+#endif
+
static const struct of_device_id sdm845_pinctrl_of_match[] = {
{ .compatible = "qcom,sdm845-pinctrl", },
{ },
@@ -1302,6 +1335,7 @@ static struct platform_driver sdm845_pinctrl_driver = {
.name = "sdm845-pinctrl",
.pm = &msm_pinctrl_dev_pm_ops,
.of_match_table = sdm845_pinctrl_of_match,
+ .acpi_match_table = ACPI_PTR(sdm845_pinctrl_acpi_match),
},
.probe = sdm845_pinctrl_probe,
.remove = msm_pinctrl_remove,
--
2.21.0

View File

@ -0,0 +1,29 @@
From 59780095ba35a49946e726c88caff6f65f3e433a Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Tue, 30 Jul 2019 14:22:36 +0100
Subject: [PATCH] arm64: tegra: Jetson TX2: Allow bootloader to configure
Ethernet MAC
Add an ethernet alias so that a stable MAC address is added to the
device tree for the wired ethernet interface.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 5e18acf5cfad..947744d0f04c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -8,6 +8,7 @@
compatible = "nvidia,p3310", "nvidia,tegra186";
aliases {
+ ethernet0 = "/ethernet@2490000";
sdhci0 = "/sdhci@3460000";
sdhci1 = "/sdhci@3400000";
serial0 = &uarta;
--
2.21.0

View File

@ -1,83 +0,0 @@
From 9ceb22fbffbad710db2c91ed32e4e73503f13301 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Tue, 25 Jun 2019 19:12:10 +0100
Subject: [PATCH] scsi: ufs-qcom: Add support for platforms booting ACPI
New Qualcomm AArch64 based laptops are now available which use UFS
as their primary data storage medium. These devices are supplied
with ACPI support out of the box. This patch ensures the Qualcomm
UFS driver will be bound when the "QCOM24A5" H/W device is
advertised as present.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
drivers/scsi/ufs/ufs-qcom.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index b4d1b5c22987..ee4b1da1e223 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -3,6 +3,7 @@
* Copyright (c) 2013-2016, Linux Foundation. All rights reserved.
*/
+#include <linux/acpi.h>
#include <linux/time.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -161,6 +162,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
int err = 0;
struct device *dev = host->hba->dev;
+ if (has_acpi_companion(dev))
+ return 0;
+
err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk",
&host->rx_l0_sync_clk, false);
if (err)
@@ -1127,9 +1131,13 @@ static int ufs_qcom_init(struct ufs_hba *hba)
__func__, err);
goto out_variant_clear;
} else if (IS_ERR(host->generic_phy)) {
- err = PTR_ERR(host->generic_phy);
- dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
- goto out_variant_clear;
+ if (has_acpi_companion(dev)) {
+ host->generic_phy = NULL;
+ } else {
+ err = PTR_ERR(host->generic_phy);
+ dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
+ goto out_variant_clear;
+ }
}
err = ufs_qcom_bus_register(host);
@@ -1599,6 +1607,14 @@ static const struct of_device_id ufs_qcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, ufs_qcom_of_match);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ufs_qcom_acpi_match[] = {
+ { "QCOM24A5" },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match);
+#endif
+
static const struct dev_pm_ops ufs_qcom_pm_ops = {
.suspend = ufshcd_pltfrm_suspend,
.resume = ufshcd_pltfrm_resume,
@@ -1615,6 +1631,7 @@ static struct platform_driver ufs_qcom_pltform = {
.name = "ufshcd-qcom",
.pm = &ufs_qcom_pm_ops,
.of_match_table = of_match_ptr(ufs_qcom_of_match),
+ .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match),
},
};
module_platform_driver(ufs_qcom_pltform);
--
2.21.0

View File

@ -1,185 +0,0 @@
From patchwork Wed Jun 26 15:48:11 2019
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Stefan Wahren <wahrenst@gmx.net>
X-Patchwork-Id: 11018115
Return-Path:
<linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org>
Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org
[172.30.200.125])
by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0546514BB
for <patchwork-linux-arm@patchwork.kernel.org>;
Wed, 26 Jun 2019 15:49:02 +0000 (UTC)
Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1])
by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E6FEC288DC
for <patchwork-linux-arm@patchwork.kernel.org>;
Wed, 26 Jun 2019 15:49:01 +0000 (UTC)
Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486)
id DADF9288E5; Wed, 26 Jun 2019 15:49:01 +0000 (UTC)
X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on
pdx-wl-mail.web.codeaurora.org
X-Spam-Level:
X-Spam-Status: No, score=-5.2 required=2.0 tests=BAYES_00,DKIM_SIGNED,
DKIM_VALID,FREEMAIL_FROM,MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED autolearn=ham
version=3.3.1
Received: from bombadil.infradead.org (bombadil.infradead.org
[198.137.202.133])
(using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 73ADC288DC
for <patchwork-linux-arm@patchwork.kernel.org>;
Wed, 26 Jun 2019 15:49:01 +0000 (UTC)
DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
d=lists.infradead.org; s=bombadil.20170209; h=Sender:
Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe:
List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:Message-Id:Date:
Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date:
Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:
References:List-Owner; bh=qjzvJkBweFVGZWCHd7cHawZMDpcLTzSf2CjoVEIv+0Q=; b=eu5
ABKzcpImxwkRcYCdHG/4eTgYM8nrpBaJqeKW2TNWEhNUjvnfU8TgkbD4nsIXkBXSb/riyKYzEcGJo
91zXHR6clQ6yf7eRtaHSX9IMfiwGPTC2YQvr6vQ+CrVJs+xDhlH/1V1+9myF4ySIX+mLOnm+w3pgi
j1JeP7vd7fpr8iyG29kaFoDH7FdC5Sw66TINVyaE5igT9yKcrFoAITGfRZevp1dd3uq5EKxs/+oo3
9BvpwHZ3Bdb+bWzFc9kS4udjL8V4+u7aesLq8tOOPLZab+W8ZW1iq4PHENzdHblrJyrK/2pGEECPx
bVAV7MIHqms4tvAAyXSlPai0wU/j12A==;
Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org)
by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux))
id 1hgAAK-00030G-Ny; Wed, 26 Jun 2019 15:48:56 +0000
Received: from mout.gmx.net ([212.227.17.20])
by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux))
id 1hgAAH-0002yg-2E; Wed, 26 Jun 2019 15:48:54 +0000
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=gmx.net;
s=badeba3b8450; t=1561564113;
bh=mWLTbdtxGfwZ13vnfxlQDfv6DzwTGycBEng3zNk/XaE=;
h=X-UI-Sender-Class:From:To:Cc:Subject:Date;
b=KYHDR8XZmzxft+7qC8J8cyQ71BSi6JkTsAhWvd+vK2f+YjWqjT42uTfrjNGCcQfdV
Z9gkAVPhUJWqXcu/GipMjVfx/QmxN65eJI1oHCOZ/vhkhzCqY9CuiJjHWnxF6jmydK
5QSqYnKAOWM3NXmd6pWkd6wlKwIFV9zX8+x8R0gE=
X-UI-Sender-Class: 01bb95c1-4bf8-414a-932a-4f6e2808ef9c
Received: from localhost.localdomain ([37.4.249.111]) by mail.gmx.com
(mrgmx102 [212.227.17.168]) with ESMTPSA (Nemesis) id
0LyS5K-1ibrK32soI-015u60; Wed, 26 Jun 2019 17:48:33 +0200
From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Madhumitha Prabakaran <madhumithabiw@gmail.com>
Subject: [PATCH V2] staging: bcm2835-camera: Restore return behavior of
ctrl_set_bitrate()
Date: Wed, 26 Jun 2019 17:48:11 +0200
Message-Id: <1561564091-14248-1-git-send-email-wahrenst@gmx.net>
X-Mailer: git-send-email 2.7.4
X-Provags-ID: V03:K1:oGZaaF0VyX9aU1B2KlshIgSdbA6j0aZLN7PhhBatNb+3vHD/bim
IAE1eOdpYqQunHD6Pg0lTq7WJELowblFluMBHzPg8LdD02e6QUAOnsxpP9+ZsegmN4310bJ
qbWyOk73ZUf0L+ErExAilg9x9ygGjCdTujEDRrk0vloZc12lmdHMEA8VQs/4HDu6WGeOoac
M59q+7daHAsSTIgJrRUuA==
X-UI-Out-Filterresults: notjunk:1;V03:K0:+5QZJxEbxD4=:fxpwesVoxYf61efHxmcTKK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X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3
X-CRM114-CacheID: sfid-20190626_084853_443115_5EF1DFC7
X-CRM114-Status: GOOD ( 11.55 )
X-BeenThere: linux-arm-kernel@lists.infradead.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: <linux-arm-kernel.lists.infradead.org>
List-Unsubscribe:
<http://lists.infradead.org/mailman/options/linux-arm-kernel>,
<mailto:linux-arm-kernel-request@lists.infradead.org?subject=unsubscribe>
List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
List-Post: <mailto:linux-arm-kernel@lists.infradead.org>
List-Help: <mailto:linux-arm-kernel-request@lists.infradead.org?subject=help>
List-Subscribe:
<http://lists.infradead.org/mailman/listinfo/linux-arm-kernel>,
<mailto:linux-arm-kernel-request@lists.infradead.org?subject=subscribe>
Cc: devel@driverdev.osuosl.org, Stefan Wahren <wahrenst@gmx.net>,
Dave Stevenson <dave.stevenson@raspberrypi.org>,
Dan Carpenter <dan.carpenter@oracle.com>,
linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org>
Errors-To:
linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
X-Virus-Scanned: ClamAV using ClamSMTP
The commit 52c4dfcead49 ("Staging: vc04_services: Cleanup in
ctrl_set_bitrate()") changed the return behavior of ctrl_set_bitrate().
We cannot do this because of a bug in the firmware, which breaks probing
of bcm2835-camera:
bcm2835-v4l2: mmal_init: failed to set all camera controls: -3
Cleanup: Destroy video encoder
Cleanup: Destroy image encoder
Cleanup: Destroy video render
Cleanup: Destroy camera
bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -3
bcm2835-camera: probe of bcm2835-camera failed with error -3
So restore the old behavior, add an explaining comment and a debug message
to verify that the bug has been fixed in firmware.
Fixes: 52c4dfcead49 ("Staging: vc04_services: Cleanup in ctrl_set_bitrate()")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
---
.../staging/vc04_services/bcm2835-camera/controls.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
Changes in V2:
- add an explaining comment as suggest by Dan and Dave
- add a debug message to verify the firmware behavior
--
2.7.4
diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
index d60e378..c251164 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -604,15 +604,28 @@ static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev,
struct v4l2_ctrl *ctrl,
const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
{
+ int ret;
struct vchiq_mmal_port *encoder_out;
dev->capture.encode_bitrate = ctrl->val;
encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0];
- return vchiq_mmal_port_parameter_set(dev->instance, encoder_out,
- mmal_ctrl->mmal_id, &ctrl->val,
- sizeof(ctrl->val));
+ ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out,
+ mmal_ctrl->mmal_id, &ctrl->val,
+ sizeof(ctrl->val));
+
+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+ "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n",
+ __func__, mmal_ctrl, ctrl->id, ctrl->val, ret,
+ (ret == 0 ? 0 : -EINVAL));
+
+ /*
+ * Older firmware versions (pre July 2019) have a bug in handling
+ * MMAL_PARAMETER_VIDEO_BIT_RATE that result in the call
+ * returning -MMAL_MSG_STATUS_EINVAL. So ignore errors from this call.
+ */
+ return 0;
}
static int ctrl_set_bitrate_mode(struct bm2835_mmal_dev *dev,

File diff suppressed because it is too large Load Diff

View File

@ -1 +0,0 @@
CONFIG_DEBUG_BLK_CGROUP=y

View File

@ -1 +1 @@
CONFIG_DMADEVICES_DEBUG=y # CONFIG_DMADEVICES_DEBUG is not set

View File

@ -0,0 +1 @@
# CONFIG_ADF4371 is not set

View File

@ -0,0 +1 @@
# CONFIG_AL_FIC is not set

View File

@ -1 +0,0 @@
# CONFIG_ARCH_NETX is not set

View File

@ -1 +0,0 @@
# CONFIG_ASIX_PHY is not set

View File

@ -0,0 +1 @@
# CONFIG_BFQ_CGROUP_DEBUG is not set

View File

@ -0,0 +1 @@
# CONFIG_BT_HCIBTUSB_MTK is not set

View File

@ -0,0 +1 @@
CONFIG_CEPH_FS_SECURITY_LABEL=y

View File

@ -1 +0,0 @@
CONFIG_CHR_DEV_OSST=m

View File

@ -1 +0,0 @@
CONFIG_CIFS_ACL=y

View File

@ -0,0 +1 @@
# CONFIG_COMMON_CLK_SI5341 is not set

View File

@ -1 +0,0 @@
CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y

View File

@ -0,0 +1 @@
CONFIG_CROS_EC_ISHTP=m

View File

@ -0,0 +1 @@
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set

View File

@ -0,0 +1 @@
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set

View File

@ -0,0 +1 @@
CONFIG_CRYPTO_XXHASH=m

View File

@ -1 +1 @@
# CONFIG_CRYPTO_ZSTD is not set CONFIG_CRYPTO_ZSTD=m

View File

@ -1 +0,0 @@
# CONFIG_DEBUG_BLK_CGROUP is not set

View File

@ -1 +0,0 @@
CONFIG_DE_AOC=y

View File

@ -0,0 +1 @@
# CONFIG_DPS310 is not set

View File

@ -0,0 +1 @@
# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set

View File

@ -0,0 +1 @@
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set

View File

@ -0,0 +1 @@
CONFIG_DVB_USB_CXUSB_ANALOG=y

View File

@ -0,0 +1 @@
CONFIG_DW_EDMA=m

View File

@ -0,0 +1 @@
CONFIG_DW_EDMA_PCIE=m

View File

@ -0,0 +1 @@
# CONFIG_EXTCON_FSA9480 is not set

View File

@ -1 +0,0 @@
CONFIG_FMC=m

View File

@ -1 +0,0 @@
CONFIG_FMC_CHARDEV=m

View File

@ -1 +0,0 @@
CONFIG_FMC_FAKEDEV=m

View File

@ -1 +0,0 @@
CONFIG_FMC_TRIVIAL=m

View File

@ -1 +0,0 @@
CONFIG_FMC_WRITE_EEPROM=m

View File

@ -1 +0,0 @@
# CONFIG_FSL_ENETC is not set

View File

@ -1 +0,0 @@
# CONFIG_FSL_ENETC_PTP_CLOCK is not set

View File

@ -1 +0,0 @@
# CONFIG_FSL_ENETC_VF is not set

View File

@ -0,0 +1 @@
CONFIG_FW_LOADER_COMPRESS=y

View File

@ -0,0 +1 @@
CONFIG_GVE=m

View File

@ -0,0 +1 @@
# CONFIG_HEADERS_INSTALL is not set

View File

@ -0,0 +1 @@
# CONFIG_HEADER_TEST is not set

View File

@ -1 +0,0 @@
CONFIG_HISAX_16_3=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_1TR6=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_AVM_A1_CS=m

View File

@ -1 +0,0 @@
CONFIG_HISAX_AVM_A1_PCMCIA=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_BKM_A4T=y

View File

@ -1 +0,0 @@
# CONFIG_HISAX_DEBUG is not set

View File

@ -1 +0,0 @@
CONFIG_HISAX_DIEHLDIVA=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_ELSA=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_ELSA_CS=m

View File

@ -1 +0,0 @@
CONFIG_HISAX_ENTERNOW_PCI=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_EURO=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_FRITZPCI=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_FRITZ_PCIPNP=m

View File

@ -1 +0,0 @@
CONFIG_HISAX_GAZEL=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_HFC4S8S=m

View File

@ -1 +0,0 @@
# CONFIG_HISAX_HFCUSB is not set

View File

@ -1 +0,0 @@
CONFIG_HISAX_HFC_PCI=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_HFC_SX=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_MAX_CARDS=8

View File

@ -1 +0,0 @@
CONFIG_HISAX_NETJET=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_NETJET_U=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_NI1=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_NICCY=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_NO_KEYPAD=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_NO_LLC=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_NO_SENDCOMPLETE=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_S0BOX=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_SCT_QUADRO=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_SEDLBAUER=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_SEDLBAUER_CS=m

View File

@ -1 +0,0 @@
CONFIG_HISAX_ST5481=m

View File

@ -1 +0,0 @@
CONFIG_HISAX_TELESPCI=y

View File

@ -1 +0,0 @@
CONFIG_HISAX_TELES_CS=m

View File

@ -1 +0,0 @@
CONFIG_HISAX_W6692=y

View File

@ -0,0 +1 @@
# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set

View File

@ -1 +1 @@
# CONFIG_IMA_APPRAISE is not set CONFIG_IMA_APPRAISE=y

View File

@ -0,0 +1 @@
CONFIG_IMA_APPRAISE_BOOTPARAM=y

View File

@ -0,0 +1 @@
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set

View File

@ -0,0 +1 @@
# CONFIG_IMA_BLACKLIST_KEYRING is not set

View File

@ -1 +1 @@
CONFIG_IMA_DEFAULT_HASH_SHA1=y # CONFIG_IMA_DEFAULT_HASH_SHA1 is not set

View File

@ -1 +1 @@
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set CONFIG_IMA_DEFAULT_HASH_SHA256=y

View File

@ -0,0 +1 @@
CONFIG_IMA_KEXEC=y

View File

@ -0,0 +1 @@
# CONFIG_IMA_LOAD_X509 is not set

View File

@ -0,0 +1 @@
# CONFIG_IMA_TRUSTED_KEYRING is not set

View File

@ -1 +0,0 @@
CONFIG_INFINIBAND_NES=m

View File

@ -1 +0,0 @@
# CONFIG_INFINIBAND_NES_DEBUG is not set

View File

@ -0,0 +1 @@
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set

View File

@ -0,0 +1 @@
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set

View File

@ -0,0 +1 @@
CONFIG_INTEGRITY_TRUSTED_KEYRING=y

Some files were not shown because too many files have changed in this diff Show More