Merge remote-tracking branch 'up/master' into master-riscv64

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>

0001-s390-jump_label-Correct-asm-contraint.patch

@@ -1,63 +0,0 @@
-From b0b46a5b622fdbe69207675c5d50b77cb8ae43b7 Mon Sep 17 00:00:00 2001
-From: Heiko Carstens <heiko.carstens@de.ibm.com>
-Date: Tue, 5 Feb 2019 13:43:49 +0100
-Subject: [PATCH] s390/jump_label: Correct asm contraint
-
-On Tue, Jan 29, 2019 at 08:25:58AM +0100, Laura Abbott wrote:
-> On 1/23/19 5:24 AM, Heiko Carstens wrote:
-> >On Wed, Jan 23, 2019 at 01:55:13PM +0100, Laura Abbott wrote:
-> >>There's a build failure with gcc9:
-> >>
-> >>  ./arch/s390/include/asm/jump_label.h: Assembler messages:
-> >>  ./arch/s390/include/asm/jump_label.h:23: Error: bad expression
-> >>  ./arch/s390/include/asm/jump_label.h:23: Error: junk at end of line, first unrecognized character is `r'
-> >>  make[1]: *** [scripts/Makefile.build:277: init/main.o] Error 1
-...
-> I've had to turn off s390 in Fedora until this gets fixed :(
-
-Laura, the patch below should fix this (temporarily). If possible,
-could you give it a try? It seems to work for me.
-
-rom 4067027c2ccc8d3f1dc3bb19fe2d00da0c65bcd8 Mon Sep 17 00:00:00 2001
-From: Heiko Carstens <heiko.carstens@de.ibm.com>
-Date: Tue, 5 Feb 2019 13:21:56 +0100
-Subject: [PATCH] s390: disable section anchors
-
-Disable section anchors to allow to compile with the current gcc 9
-experimental version. The section anchors is a new feature for s390
-with gcc 9, however it breaks our current usage of the 'X' constraint
-within the asm goto construct within our jump label implementation.
-
-Fixing this seems to be non-trivial, therefore (hopefully) temporarily
-disable section anchors. We will hopefully have a better solution
-before gcc 9 is released, so that this can be removed again.
-
-Reported-by: Laura Abbott <labbott@redhat.com>
-Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
-Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
----
- arch/s390/Makefile | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/arch/s390/Makefile b/arch/s390/Makefile
-index e21053e5e0da..1eac75bc3a29 100644
---- a/arch/s390/Makefile
-+++ b/arch/s390/Makefile
-@@ -62,6 +62,14 @@ cflags-y += -Wa,-I$(srctree)/arch/$(ARCH)/include
- #
- cflags-$(CONFIG_FRAME_POINTER) += -fno-optimize-sibling-calls
- 
-+#
-+# Disable section anchors. This gcc 9 feature currently breaks the 'X'
-+# constraint like it is used in the asm goto construct.
-+#
-+ifeq ($(call cc-option-yn,-fno-section-anchors),y)
-+cflags-y += -fno-section-anchors
-+endif
-+
- ifeq ($(call cc-option-yn,-mpacked-stack),y)
- cflags-$(CONFIG_PACK_STACK)  += -mpacked-stack -D__PACK_STACK
- aflags-$(CONFIG_PACK_STACK)  += -D__PACK_STACK
--- 
-2.20.1
-

ARM-cpufreq-support-for-Raspberry-Pi.patch

@@ -470,173 +470,6 @@ index 61be15d9df7d..da26a584dca0 100644
 -- 
 2.21.0
 
-From a94ed1abc52b51c55454b3f1a7181af9d91d9d73 Mon Sep 17 00:00:00 2001
-From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Date: Tue, 11 Jun 2019 19:58:40 +0200
-Subject: [PATCH 4/5] cpufreq: add driver for Raspbery Pi
-
-Raspberry Pi's firmware offers and interface though which update it's
-performance requirements. It allows us to request for specific runtime
-frequencies, which the firmware might or might not respect, depending on
-the firmware configuration and thermals.
-
-As the maximum and minimum frequencies are configurable in the firmware
-there is no way to know in advance their values. So the Raspberry Pi
-cpufreq driver queries them, builds an opp frequency table to then
-launch cpufreq-dt.
-
-Also, as the firmware interface might be configured as a module, making
-the cpu clock unavailable during init, this implements a full fledged
-driver, as opposed to most drivers registering cpufreq-dt, which only
-make use of an init routine.
-
-Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Acked-by: Eric Anholt <eric@anholt.net>
-Reviewed-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/cpufreq/Kconfig.arm           |  8 +++
- drivers/cpufreq/Makefile              |  1 +
- drivers/cpufreq/raspberrypi-cpufreq.c | 97 +++++++++++++++++++++++++++
- 3 files changed, 106 insertions(+)
- create mode 100644 drivers/cpufreq/raspberrypi-cpufreq.c
-
-diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
-index f8129edc145e..5e9204d443ff 100644
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -133,6 +133,14 @@ config ARM_QCOM_CPUFREQ_HW
- 	  The driver implements the cpufreq interface for this HW engine.
- 	  Say Y if you want to support CPUFreq HW.
- 
-+config ARM_RASPBERRYPI_CPUFREQ
-+	tristate "Raspberry Pi cpufreq support"
-+	depends on CLK_RASPBERRYPI || COMPILE_TEST
-+	help
-+	  This adds the CPUFreq driver for Raspberry Pi
-+
-+	  If in doubt, say N.
-+
- config ARM_S3C_CPUFREQ
- 	bool
- 	help
-diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
-index 689b26c6f949..121c1acb66c0 100644
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
- obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
- obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o
- obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)	+= qcom-cpufreq-kryo.o
-+obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) 	+= raspberrypi-cpufreq.o
- obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
- obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
- obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
-diff --git a/drivers/cpufreq/raspberrypi-cpufreq.c b/drivers/cpufreq/raspberrypi-cpufreq.c
-new file mode 100644
-index 000000000000..2bc7d9734272
---- /dev/null
-+++ b/drivers/cpufreq/raspberrypi-cpufreq.c
-@@ -0,0 +1,97 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Raspberry Pi cpufreq driver
-+ *
-+ * Copyright (C) 2019, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/cpu.h>
-+#include <linux/cpufreq.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+
-+#define RASPBERRYPI_FREQ_INTERVAL	100000000
-+
-+static struct platform_device *cpufreq_dt;
-+
-+static int raspberrypi_cpufreq_probe(struct platform_device *pdev)
-+{
-+	struct device *cpu_dev;
-+	unsigned long min, max;
-+	unsigned long rate;
-+	struct clk *clk;
-+	int ret;
-+
-+	cpu_dev = get_cpu_device(0);
-+	if (!cpu_dev) {
-+		pr_err("Cannot get CPU for cpufreq driver\n");
-+		return -ENODEV;
-+	}
-+
-+	clk = clk_get(cpu_dev, NULL);
-+	if (IS_ERR(clk)) {
-+		dev_err(cpu_dev, "Cannot get clock for CPU0\n");
-+		return PTR_ERR(clk);
-+	}
-+
-+	/*
-+	 * The max and min frequencies are configurable in the Raspberry Pi
-+	 * firmware, so we query them at runtime.
-+	 */
-+	min = roundup(clk_round_rate(clk, 0), RASPBERRYPI_FREQ_INTERVAL);
-+	max = roundup(clk_round_rate(clk, ULONG_MAX), RASPBERRYPI_FREQ_INTERVAL);
-+	clk_put(clk);
-+
-+	for (rate = min; rate <= max; rate += RASPBERRYPI_FREQ_INTERVAL) {
-+		ret = dev_pm_opp_add(cpu_dev, rate, 0);
-+		if (ret)
-+			goto remove_opp;
-+	}
-+
-+	cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-+	ret = PTR_ERR_OR_ZERO(cpufreq_dt);
-+	if (ret) {
-+		dev_err(cpu_dev, "Failed to create platform device, %d\n", ret);
-+		goto remove_opp;
-+	}
-+
-+	return 0;
-+
-+remove_opp:
-+	dev_pm_opp_remove_all_dynamic(cpu_dev);
-+
-+	return ret;
-+}
-+
-+static int raspberrypi_cpufreq_remove(struct platform_device *pdev)
-+{
-+	struct device *cpu_dev;
-+
-+	cpu_dev = get_cpu_device(0);
-+	if (cpu_dev)
-+		dev_pm_opp_remove_all_dynamic(cpu_dev);
-+
-+	platform_device_unregister(cpufreq_dt);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Since the driver depends on clk-raspberrypi, which may return EPROBE_DEFER,
-+ * all the activity is performed in the probe, which may be defered as well.
-+ */
-+static struct platform_driver raspberrypi_cpufreq_driver = {
-+	.driver = {
-+		.name = "raspberrypi-cpufreq",
-+	},
-+	.probe          = raspberrypi_cpufreq_probe,
-+	.remove		= raspberrypi_cpufreq_remove,
-+};
-+module_platform_driver(raspberrypi_cpufreq_driver);
-+
-+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de");
-+MODULE_DESCRIPTION("Raspberry Pi cpufreq driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:raspberrypi-cpufreq");
--- 
-2.21.0
-
 From af32d83d10976ff357c56adba79fa3cb06e1c32d Mon Sep 17 00:00:00 2001
 From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 Date: Tue, 11 Jun 2019 19:58:42 +0200

arm-make-highpte-not-expert.patch

@@ -0,0 +1,31 @@
+From 19908e5fe3e63ed2d39f0a8a9135f35fd428d766 Mon Sep 17 00:00:00 2001
+From: Jon Masters <jcm@redhat.com>
+Date: Thu, 18 Jul 2019 15:47:26 -0400
+Subject: [PATCH] arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
+
+We will use this to force CONFIG_HIGHPTE off on LPAE for now
+
+Signed-off-by: Jon Masters <jcm@redhat.com>
+---
+ arch/arm/Kconfig | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 2bf1ce39a96d..e792b3e60095 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1644,9 +1644,9 @@ config HIGHMEM
+ 	  If unsure, say n.
+ 
+ config HIGHPTE
+-	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
++	bool "Allocate 2nd-level pagetables from highmem"
+ 	depends on HIGHMEM
+-	default y
++	default n
+ 	help
+ 	  The VM uses one page of physical memory for each page table.
+ 	  For systems with a lot of processes, this can use a lot of
+-- 
+2.17.2
+

arm64-acpi-ignore-5.1-fadts-reported-as-5.0.patch

@@ -1,41 +0,0 @@
-From a7edc17544709d20f800dc0898096365a3d68613 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-Date: Sun, 2 Jun 2019 16:36:15 +0200
-Subject: [PATCH] acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
-
-Some Qualcomm Snapdragon based laptops built to run Microsoft Windows
-are clearly ACPI 5.1 based, given that that is the first ACPI revision
-that supports ARM, and introduced the FADT 'arm_boot_flags' field,
-which has a non-zero field on those systems.
-
-So in these cases, infer from the ARM boot flags that the FADT must be
-5.1 or later, and treat it as 5.1.
-
-Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
----
- arch/arm64/kernel/acpi.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
-index 803f0494dd3e3..7722e85fb69c3 100644
---- a/arch/arm64/kernel/acpi.c
-+++ b/arch/arm64/kernel/acpi.c
-@@ -155,10 +155,14 @@ static int __init acpi_fadt_sanity_check(void)
- 	 */
- 	if (table->revision < 5 ||
- 	   (table->revision == 5 && fadt->minor_revision < 1)) {
--		pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n",
-+		pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",
- 		       table->revision, fadt->minor_revision);
--		ret = -EINVAL;
--		goto out;
-+
-+		if (!fadt->arm_boot_flags) {
-+			ret = -EINVAL;
-+			goto out;
-+		}
-+		pr_err("FADT has ARM boot flags set, assuming 5.1\n");
- 	}
- 
- 	if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) {
-

arm64-acpi-make-ac-and-battery-drivers-available-on-non-x86.patch

@@ -1,30 +0,0 @@
-From 7b87bc98ab598ae40ef1818fb0c420d61dd87ed1 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-Date: Mon, 3 Jun 2019 08:37:11 +0200
-Subject: [PATCH] acpi: make AC and battery drivers available on !X86
-
-Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
----
- drivers/acpi/Kconfig | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
-index e016f7a6ed136..3c8011e7b0d7c 100644
---- a/drivers/acpi/Kconfig
-+++ b/drivers/acpi/Kconfig
-@@ -155,7 +155,6 @@ config ACPI_EC_DEBUGFS
- 
- config ACPI_AC
- 	tristate "AC Adapter"
--	depends on X86
- 	select POWER_SUPPLY
- 	default y
- 	help
-@@ -168,7 +167,6 @@ config ACPI_AC
- 
- config ACPI_BATTERY
- 	tristate "Battery"
--	depends on X86
- 	select POWER_SUPPLY
- 	default y
- 	help

arm64-qcom-pinctrl-support-for-ACPI.patch

@@ -1,293 +0,0 @@
-From 0ab5b9df0c9f07ae747ddc678d4e423c42f69624 Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 10 Jun 2019 09:42:06 +0100
-Subject: [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI
-
-Add a match table to allow automatic probing of ACPI device
-QCOM0220.  Ignore clock attainment errors.  Set default clock
-frequency value.
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
----
- drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++++++++-
- 1 file changed, 14 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
-index db075bc0d952..9e3b8a98688d 100644
---- a/drivers/i2c/busses/i2c-qcom-geni.c
-+++ b/drivers/i2c/busses/i2c-qcom-geni.c
-@@ -1,6 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0
- // Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
- 
-+#include <linux/acpi.h>
- #include <linux/clk.h>
- #include <linux/dma-mapping.h>
- #include <linux/err.h>
-@@ -483,6 +484,14 @@ static const struct i2c_algorithm geni_i2c_algo = {
- 	.functionality	= geni_i2c_func,
- };
- 
-+#ifdef CONFIG_ACPI
-+static const struct acpi_device_id geni_i2c_acpi_match[] = {
-+	{ "QCOM0220"},
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match);
-+#endif
-+
- static int geni_i2c_probe(struct platform_device *pdev)
- {
- 	struct geni_i2c_dev *gi2c;
-@@ -502,7 +511,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
- 		return PTR_ERR(gi2c->se.base);
- 
- 	gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
--	if (IS_ERR(gi2c->se.clk)) {
-+	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
- 		ret = PTR_ERR(gi2c->se.clk);
- 		dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
- 		return ret;
-@@ -516,6 +525,9 @@ static int geni_i2c_probe(struct platform_device *pdev)
- 		gi2c->clk_freq_out = KHZ(100);
- 	}
- 
-+	if (has_acpi_companion(&pdev->dev))
-+		ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
-+
- 	gi2c->irq = platform_get_irq(pdev, 0);
- 	if (gi2c->irq < 0) {
- 		dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
-@@ -660,6 +672,7 @@ static struct platform_driver geni_i2c_driver = {
- 		.name = "geni_i2c",
- 		.pm = &geni_i2c_pm_ops,
- 		.of_match_table = geni_i2c_dt_match,
-+		.acpi_match_table = ACPI_PTR(geni_i2c_acpi_match),
- 	},
- };
- 
--- 
-2.21.0
-
-From 5a0639fed6e05977d85c4824354e73d0a2fa92ef Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 10 Jun 2019 09:42:07 +0100
-Subject: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
-
-The Qualcomm Geni I2C driver currently probes silently which can be
-confusing when debugging potential issues.  Add a low level (INFO)
-print when each I2C controller is successfully initially set-up.
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
----
- drivers/i2c/busses/i2c-qcom-geni.c | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
-index 9e3b8a98688d..a89bfce5388e 100644
---- a/drivers/i2c/busses/i2c-qcom-geni.c
-+++ b/drivers/i2c/busses/i2c-qcom-geni.c
-@@ -596,6 +596,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
- 		return ret;
- 	}
- 
-+	dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
-+
- 	return 0;
- }
- 
--- 
-2.21.0
-
-From 6f202eb6dbccf3172616a620faf934bf6195a0f9 Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 10 Jun 2019 09:42:08 +0100
-Subject: [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a
- reserved GPIO list
-
-When booting MSM based platforms with Device Tree or some ACPI
-implementations, it is possible to provide a list of reserved pins
-via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
-However some ACPI tables are not populated with this information,
-thus it has to come from a knowledgable device driver instead.
-
-Here we provide the MSM common driver with additional support to
-parse this informtion and correctly populate the widely used
-'valid_mask'.
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- drivers/pinctrl/qcom/pinctrl-msm.c | 18 ++++++++++++++++++
- drivers/pinctrl/qcom/pinctrl-msm.h |  1 +
- 2 files changed, 19 insertions(+)
-
-diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
-index 6e319bcc2326..80682b017a47 100644
---- a/drivers/pinctrl/qcom/pinctrl-msm.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
-@@ -599,8 +599,23 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip)
- 	int ret;
- 	unsigned int len, i;
- 	unsigned int max_gpios = pctrl->soc->ngpios;
-+	const int *reserved = pctrl->soc->reserved_gpios;
- 	u16 *tmp;
- 
-+	/* Driver provided reserved list overrides DT and ACPI */
-+	if (reserved) {
-+		bitmap_fill(chip->valid_mask, max_gpios);
-+		for (i = 0; reserved[i] >= 0; i++) {
-+			if (i >= max_gpios || reserved[i] >= max_gpios) {
-+				dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
-+				return -EINVAL;
-+			}
-+			clear_bit(reserved[i], chip->valid_mask);
-+		}
-+
-+		return 0;
-+	}
-+
- 	/* The number of GPIOs in the ACPI tables */
- 	len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL,
- 						   0);
-@@ -956,6 +971,9 @@ static void msm_gpio_irq_handler(struct irq_desc *desc)
- 
- static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
- {
-+	if (pctrl->soc->reserved_gpios)
-+		return true;
-+
- 	return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0;
- }
- 
-diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
-index b724581c605c..48569cda8471 100644
---- a/drivers/pinctrl/qcom/pinctrl-msm.h
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
-@@ -113,6 +113,7 @@ struct msm_pinctrl_soc_data {
- 	bool pull_no_keeper;
- 	const char *const *tiles;
- 	unsigned int ntiles;
-+	const int *reserved_gpios;
- };
- 
- extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
--- 
-2.21.0
-
-From 568ff4c9723d761164416fdf876232f5b14cf3ad Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 10 Jun 2019 09:42:09 +0100
-Subject: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
-
-This patch provides basic support for booting with ACPI instead
-of the currently supported Device Tree.  When doing so there are a
-couple of differences which we need to taken into consideration.
-
-Firstly, the SDM850 ACPI tables omit information pertaining to the
-4 reserved GPIOs on the platform.  If Linux attempts to touch/
-initialise any of these lines, the firmware will restart the
-platform.
-
-Secondly, when booting with ACPI, it is expected that the firmware
-will set-up things like; Regulators, Clocks, Pin Functions, etc in
-their ideal configuration.  Thus, the possible Pin Functions
-available to this platform are not advertised when providing the
-higher GPIOD/Pinctrl APIs with pin information.
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
----
- drivers/pinctrl/qcom/Kconfig          |  2 +-
- drivers/pinctrl/qcom/pinctrl-sdm845.c | 36 ++++++++++++++++++++++++++-
- 2 files changed, 36 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
-index 890d0a3a790b..27ab585a639c 100644
---- a/drivers/pinctrl/qcom/Kconfig
-+++ b/drivers/pinctrl/qcom/Kconfig
-@@ -169,7 +169,7 @@ config PINCTRL_SDM660
- 
- config PINCTRL_SDM845
-        tristate "Qualcomm Technologies Inc SDM845 pin controller driver"
--       depends on GPIOLIB && OF
-+       depends on GPIOLIB && (OF || ACPI)
-        select PINCTRL_MSM
-        help
-          This is the pinctrl, pinmux, pinconf and gpiolib driver for the
-diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c
-index c97f20fca5fd..98a438dba711 100644
---- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
-+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
-@@ -3,6 +3,7 @@
-  * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
-  */
- 
-+#include <linux/acpi.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
-@@ -1277,6 +1278,10 @@ static const struct msm_pingroup sdm845_groups[] = {
- 	UFS_RESET(ufs_reset, 0x99f000),
- };
- 
-+static const int sdm845_acpi_reserved_gpios[] = {
-+	0, 1, 2, 3, 81, 82, 83, 84, -1
-+};
-+
- static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
- 	.pins = sdm845_pins,
- 	.npins = ARRAY_SIZE(sdm845_pins),
-@@ -1287,11 +1292,39 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
- 	.ngpios = 150,
- };
- 
-+static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
-+	.pins = sdm845_pins,
-+	.npins = ARRAY_SIZE(sdm845_pins),
-+	.groups = sdm845_groups,
-+	.ngroups = ARRAY_SIZE(sdm845_groups),
-+	.reserved_gpios = sdm845_acpi_reserved_gpios,
-+	.ngpios = 150,
-+};
-+
- static int sdm845_pinctrl_probe(struct platform_device *pdev)
- {
--	return msm_pinctrl_probe(pdev, &sdm845_pinctrl);
-+	int ret;
-+
-+	if (pdev->dev.of_node) {
-+		ret = msm_pinctrl_probe(pdev, &sdm845_pinctrl);
-+	} else if (has_acpi_companion(&pdev->dev)) {
-+		ret = msm_pinctrl_probe(pdev, &sdm845_acpi_pinctrl);
-+	} else {
-+		dev_err(&pdev->dev, "DT and ACPI disabled\n");
-+		return -EINVAL;
-+	}
-+
-+	return ret;
- }
- 
-+#ifdef CONFIG_ACPI
-+static const struct acpi_device_id sdm845_pinctrl_acpi_match[] = {
-+	{ "QCOM0217"},
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(acpi, sdm845_pinctrl_acpi_match);
-+#endif
-+
- static const struct of_device_id sdm845_pinctrl_of_match[] = {
- 	{ .compatible = "qcom,sdm845-pinctrl", },
- 	{ },
-@@ -1302,6 +1335,7 @@ static struct platform_driver sdm845_pinctrl_driver = {
- 		.name = "sdm845-pinctrl",
- 		.pm = &msm_pinctrl_dev_pm_ops,
- 		.of_match_table = sdm845_pinctrl_of_match,
-+		.acpi_match_table = ACPI_PTR(sdm845_pinctrl_acpi_match),
- 	},
- 	.probe = sdm845_pinctrl_probe,
- 	.remove = msm_pinctrl_remove,
--- 
-2.21.0

arm64-tegra-Jetson-TX2-Allow-bootloader-to-configure.patch

@@ -0,0 +1,29 @@
+From 59780095ba35a49946e726c88caff6f65f3e433a Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 30 Jul 2019 14:22:36 +0100
+Subject: [PATCH] arm64: tegra: Jetson TX2: Allow bootloader to configure
+ Ethernet MAC
+
+Add an ethernet alias so that a stable MAC address is added to the
+device tree for the wired ethernet interface.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+index 5e18acf5cfad..947744d0f04c 100644
+--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
++++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+@@ -8,6 +8,7 @@
+ 	compatible = "nvidia,p3310", "nvidia,tegra186";
+ 
+ 	aliases {
++		ethernet0 = "/ethernet@2490000";
+ 		sdhci0 = "/sdhci@3460000";
+ 		sdhci1 = "/sdhci@3400000";
+ 		serial0 = &uarta;
+-- 
+2.21.0
+

arm64-ufs-qcom-Add-support-for-platforms-booting-ACPI.patch

@@ -1,83 +0,0 @@
-From 9ceb22fbffbad710db2c91ed32e4e73503f13301 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 25 Jun 2019 19:12:10 +0100
-Subject: [PATCH] scsi: ufs-qcom: Add support for platforms booting ACPI
-
-New Qualcomm AArch64 based laptops are now available which use UFS
-as their primary data storage medium.  These devices are supplied
-with ACPI support out of the box.  This patch ensures the Qualcomm
-UFS driver will be bound when the "QCOM24A5" H/W device is
-advertised as present.
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- drivers/scsi/ufs/ufs-qcom.c | 23 ++++++++++++++++++++---
- 1 file changed, 20 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
-index b4d1b5c22987..ee4b1da1e223 100644
---- a/drivers/scsi/ufs/ufs-qcom.c
-+++ b/drivers/scsi/ufs/ufs-qcom.c
-@@ -3,6 +3,7 @@
-  * Copyright (c) 2013-2016, Linux Foundation. All rights reserved.
-  */
- 
-+#include <linux/acpi.h>
- #include <linux/time.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
-@@ -161,6 +162,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
- 	int err = 0;
- 	struct device *dev = host->hba->dev;
- 
-+	if (has_acpi_companion(dev))
-+		return 0;
-+
- 	err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk",
- 					&host->rx_l0_sync_clk, false);
- 	if (err)
-@@ -1127,9 +1131,13 @@ static int ufs_qcom_init(struct ufs_hba *hba)
- 			__func__, err);
- 		goto out_variant_clear;
- 	} else if (IS_ERR(host->generic_phy)) {
--		err = PTR_ERR(host->generic_phy);
--		dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
--		goto out_variant_clear;
-+		if (has_acpi_companion(dev)) {
-+			host->generic_phy = NULL;
-+		} else {
-+			err = PTR_ERR(host->generic_phy);
-+			dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
-+			goto out_variant_clear;
-+		}
- 	}
- 
- 	err = ufs_qcom_bus_register(host);
-@@ -1599,6 +1607,14 @@ static const struct of_device_id ufs_qcom_of_match[] = {
- };
- MODULE_DEVICE_TABLE(of, ufs_qcom_of_match);
- 
-+#ifdef CONFIG_ACPI
-+static const struct acpi_device_id ufs_qcom_acpi_match[] = {
-+	{ "QCOM24A5" },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match);
-+#endif
-+
- static const struct dev_pm_ops ufs_qcom_pm_ops = {
- 	.suspend	= ufshcd_pltfrm_suspend,
- 	.resume		= ufshcd_pltfrm_resume,
-@@ -1615,6 +1631,7 @@ static struct platform_driver ufs_qcom_pltform = {
- 		.name	= "ufshcd-qcom",
- 		.pm	= &ufs_qcom_pm_ops,
- 		.of_match_table = of_match_ptr(ufs_qcom_of_match),
-+		.acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match),
- 	},
- };
- module_platform_driver(ufs_qcom_pltform);
--- 
-2.21.0
-

bcm2835-camera-Restore-return-behavior-of-ctrl_set_bitrate.patch

@@ -1,185 +0,0 @@
-From patchwork Wed Jun 26 15:48:11 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Stefan Wahren <wahrenst@gmx.net>
-X-Patchwork-Id: 11018115
-Return-Path: 
- <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org>
-Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org
- [172.30.200.125])
-	by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0546514BB
-	for <patchwork-linux-arm@patchwork.kernel.org>;
- Wed, 26 Jun 2019 15:49:02 +0000 (UTC)
-Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1])
-	by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E6FEC288DC
-	for <patchwork-linux-arm@patchwork.kernel.org>;
- Wed, 26 Jun 2019 15:49:01 +0000 (UTC)
-Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486)
-	id DADF9288E5; Wed, 26 Jun 2019 15:49:01 +0000 (UTC)
-X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on
-	pdx-wl-mail.web.codeaurora.org
-X-Spam-Level: 
-X-Spam-Status: No, score=-5.2 required=2.0 tests=BAYES_00,DKIM_SIGNED,
-	DKIM_VALID,FREEMAIL_FROM,MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED autolearn=ham
-	version=3.3.1
-Received: from bombadil.infradead.org (bombadil.infradead.org
- [198.137.202.133])
-	(using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits))
-	(No client certificate requested)
-	by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 73ADC288DC
-	for <patchwork-linux-arm@patchwork.kernel.org>;
- Wed, 26 Jun 2019 15:49:01 +0000 (UTC)
-DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
-	d=lists.infradead.org; s=bombadil.20170209; h=Sender:
-	Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe:
-	List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:Message-Id:Date:
-	Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date:
-	Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:
-	References:List-Owner; bh=qjzvJkBweFVGZWCHd7cHawZMDpcLTzSf2CjoVEIv+0Q=; b=eu5
-	ABKzcpImxwkRcYCdHG/4eTgYM8nrpBaJqeKW2TNWEhNUjvnfU8TgkbD4nsIXkBXSb/riyKYzEcGJo
-	91zXHR6clQ6yf7eRtaHSX9IMfiwGPTC2YQvr6vQ+CrVJs+xDhlH/1V1+9myF4ySIX+mLOnm+w3pgi
-	j1JeP7vd7fpr8iyG29kaFoDH7FdC5Sw66TINVyaE5igT9yKcrFoAITGfRZevp1dd3uq5EKxs/+oo3
-	9BvpwHZ3Bdb+bWzFc9kS4udjL8V4+u7aesLq8tOOPLZab+W8ZW1iq4PHENzdHblrJyrK/2pGEECPx
-	bVAV7MIHqms4tvAAyXSlPai0wU/j12A==;
-Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org)
-	by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux))
-	id 1hgAAK-00030G-Ny; Wed, 26 Jun 2019 15:48:56 +0000
-Received: from mout.gmx.net ([212.227.17.20])
- by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux))
- id 1hgAAH-0002yg-2E; Wed, 26 Jun 2019 15:48:54 +0000
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=gmx.net;
- s=badeba3b8450; t=1561564113;
- bh=mWLTbdtxGfwZ13vnfxlQDfv6DzwTGycBEng3zNk/XaE=;
- h=X-UI-Sender-Class:From:To:Cc:Subject:Date;
- b=KYHDR8XZmzxft+7qC8J8cyQ71BSi6JkTsAhWvd+vK2f+YjWqjT42uTfrjNGCcQfdV
- Z9gkAVPhUJWqXcu/GipMjVfx/QmxN65eJI1oHCOZ/vhkhzCqY9CuiJjHWnxF6jmydK
- 5QSqYnKAOWM3NXmd6pWkd6wlKwIFV9zX8+x8R0gE=
-X-UI-Sender-Class: 01bb95c1-4bf8-414a-932a-4f6e2808ef9c
-Received: from localhost.localdomain ([37.4.249.111]) by mail.gmx.com
- (mrgmx102 [212.227.17.168]) with ESMTPSA (Nemesis) id
- 0LyS5K-1ibrK32soI-015u60; Wed, 26 Jun 2019 17:48:33 +0200
-From: Stefan Wahren <wahrenst@gmx.net>
-To: Eric Anholt <eric@anholt.net>,
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
- Madhumitha Prabakaran <madhumithabiw@gmail.com>
-Subject: [PATCH V2] staging: bcm2835-camera: Restore return behavior of
- ctrl_set_bitrate()
-Date: Wed, 26 Jun 2019 17:48:11 +0200
-Message-Id: <1561564091-14248-1-git-send-email-wahrenst@gmx.net>
-X-Mailer: git-send-email 2.7.4
-X-Provags-ID: V03:K1:oGZaaF0VyX9aU1B2KlshIgSdbA6j0aZLN7PhhBatNb+3vHD/bim
- IAE1eOdpYqQunHD6Pg0lTq7WJELowblFluMBHzPg8LdD02e6QUAOnsxpP9+ZsegmN4310bJ
- qbWyOk73ZUf0L+ErExAilg9x9ygGjCdTujEDRrk0vloZc12lmdHMEA8VQs/4HDu6WGeOoac
- M59q+7daHAsSTIgJrRUuA==
-X-UI-Out-Filterresults: notjunk:1;V03:K0:+5QZJxEbxD4=:fxpwesVoxYf61efHxmcTKK
- BddiAtw8+v4csO9cTNV4qSFAebPmgWlPv8KyLXPbOQdcjOl72FUcevKvhsznxi/uv5leFw9uX
- Sr99W78EPj3EmJmQT1KZ8GMPWcB/hQa1h/t4bhjHByFu4VQ2xaIdpsJfZlFcR2poK1E6dEFT6
- jHlzWYjt2kP7anvsjMJvdSVILf9+ei6ysWz1aaMCKFLhxNUNmXH9onDdO8WOanGVr15zb+cVv
- N4ecxzj0SonMoADsz1UJqgwb8Pi5/me809KQd8pQ/GhKDeLPNwQPXJMMhRbyPgmg5bJVCRUgp
- MaMwDNiIn3qPl6t4jPx9uiSL5n47PAyt6vVlyufqp1lOr4EqgQFWp+2hknWJYJ8hzkBLgXrdZ
- gfNGAtlqG9MdHsJds/KNtpjNvF3iCuOWcIyBEGAYKZL78LQggOcIFSlHn+KZ9JU2t9jGJHKF7
- 0E7pkZuWJIQjaWnt7WTAiO/Pv3tNhKukGVQXG7OTxkwS3+BsXI+vBB+xtOP+syI1QFkP3h+5c
- 9HVQLB7CA73bkyul1AwmrHNV+OqITaTatTPFXsDojt54X59pz2G3SkQI5z8JZ2aq40Z3vwI6u
- lyMT+gPPFDx2aNm460FX8Gm+2BisA5xrkpjxb4KIDZvTRDCexntK3cadXRyX7GZQWc6poIcVf
- atWNWiKYv6KN6vA+lc2Ffl5FM8p7BFtkX4GA0GZ/XhMTvCqDtgxBdQ4sevKJ4riNMAvRuswrM
- BUrlhaRg3ElFPF3x+S73QaRmNmtv34L7puWW57WxrkKKSJS7Td0oZd1ktx6eAW1CA+I8RmOn3
- A+rcm/ZfBf00TXqxsq3/t9h4mL3cP4KhBAxtyYg4z4yjuWt8AmXR6GfvTwCxk+qioygsV6KyY
- 6yh532oUizARrL8gUwZBauRwgH5rk7e2BWINY86y8vr3nSBzocuIFAekTK42reIsJ+qq9OSD5
- IcQroenV1LixMtStvb6CiyHMHMqpxb+Buu+0bdl5qjKcUB4JxBA6KWMPC6Orj+Yf/GKaQlk+k
- VsgZBuZAUHsZFuULBdIsUg//MyQJ0q/13WL31BSqJX9SAMgHFgsGeDo4yAg4YSF2Mbh1EgZu7
- a3+bklRX7SG3Ts=
-X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 
-X-CRM114-CacheID: sfid-20190626_084853_443115_5EF1DFC7 
-X-CRM114-Status: GOOD (  11.55  )
-X-BeenThere: linux-arm-kernel@lists.infradead.org
-X-Mailman-Version: 2.1.29
-Precedence: list
-List-Id: <linux-arm-kernel.lists.infradead.org>
-List-Unsubscribe: 
- <http://lists.infradead.org/mailman/options/linux-arm-kernel>,
- <mailto:linux-arm-kernel-request@lists.infradead.org?subject=unsubscribe>
-List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
-List-Post: <mailto:linux-arm-kernel@lists.infradead.org>
-List-Help: <mailto:linux-arm-kernel-request@lists.infradead.org?subject=help>
-List-Subscribe: 
- <http://lists.infradead.org/mailman/listinfo/linux-arm-kernel>,
- <mailto:linux-arm-kernel-request@lists.infradead.org?subject=subscribe>
-Cc: devel@driverdev.osuosl.org, Stefan Wahren <wahrenst@gmx.net>,
- Dave Stevenson <dave.stevenson@raspberrypi.org>,
- Dan Carpenter <dan.carpenter@oracle.com>,
- linux-arm-kernel@lists.infradead.org,
- linux-rpi-kernel@lists.infradead.org
-MIME-Version: 1.0
-Content-Type: text/plain; charset="us-ascii"
-Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org>
-Errors-To: 
- linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
-X-Virus-Scanned: ClamAV using ClamSMTP
-
-The commit 52c4dfcead49 ("Staging: vc04_services: Cleanup in
-ctrl_set_bitrate()") changed the return behavior of ctrl_set_bitrate().
-We cannot do this because of a bug in the firmware, which breaks probing
-of bcm2835-camera:
-
-    bcm2835-v4l2: mmal_init: failed to set all camera controls: -3
-    Cleanup: Destroy video encoder
-    Cleanup: Destroy image encoder
-    Cleanup: Destroy video render
-    Cleanup: Destroy camera
-    bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -3
-    bcm2835-camera: probe of bcm2835-camera failed with error -3
-
-So restore the old behavior, add an explaining comment and a debug message
-to verify that the bug has been fixed in firmware.
-
-Fixes: 52c4dfcead49 ("Staging: vc04_services: Cleanup in ctrl_set_bitrate()")
-Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
-Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
----
- .../staging/vc04_services/bcm2835-camera/controls.c   | 19 ++++++++++++++++---
- 1 file changed, 16 insertions(+), 3 deletions(-)
-
-Changes in V2:
-- add an explaining comment as suggest by Dan and Dave
-- add a debug message to verify the firmware behavior
-
---
-2.7.4
-
-diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
-index d60e378..c251164 100644
---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
-+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
-@@ -604,15 +604,28 @@ static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev,
- 			    struct v4l2_ctrl *ctrl,
- 			    const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
- {
-+	int ret;
- 	struct vchiq_mmal_port *encoder_out;
-
- 	dev->capture.encode_bitrate = ctrl->val;
-
- 	encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0];
-
--	return vchiq_mmal_port_parameter_set(dev->instance, encoder_out,
--					     mmal_ctrl->mmal_id, &ctrl->val,
--					     sizeof(ctrl->val));
-+	ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out,
-+					    mmal_ctrl->mmal_id, &ctrl->val,
-+					    sizeof(ctrl->val));
-+
-+	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
-+		 "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n",
-+		 __func__, mmal_ctrl, ctrl->id, ctrl->val, ret,
-+		 (ret == 0 ? 0 : -EINVAL));
-+
-+	/*
-+	 * Older firmware versions (pre July 2019) have a bug in handling
-+	 * MMAL_PARAMETER_VIDEO_BIT_RATE that result in the call
-+	 * returning -MMAL_MSG_STATUS_EINVAL. So ignore errors from this call.
-+	 */
-+	return 0;
- }
-
- static int ctrl_set_bitrate_mode(struct bm2835_mmal_dev *dev,

configs/fedora/debug/CONFIG_DEBUG_BLK_CGROUP

@@ -1 +0,0 @@
-CONFIG_DEBUG_BLK_CGROUP=y

configs/fedora/debug/CONFIG_DMADEVICES_DEBUG

@@ -1 +1 @@
-CONFIG_DMADEVICES_DEBUG=y
+# CONFIG_DMADEVICES_DEBUG is not set

configs/fedora/generic/CONFIG_ADF4371

@@ -0,0 +1 @@
+# CONFIG_ADF4371 is not set

configs/fedora/generic/CONFIG_AL_FIC

@@ -0,0 +1 @@
+# CONFIG_AL_FIC is not set

configs/fedora/generic/CONFIG_ARCH_NETX

@@ -1 +0,0 @@
-# CONFIG_ARCH_NETX is not set

configs/fedora/generic/CONFIG_ASIX_PHY

@@ -1 +0,0 @@
-# CONFIG_ASIX_PHY is not set

configs/fedora/generic/CONFIG_BFQ_CGROUP_DEBUG

@@ -0,0 +1 @@
+# CONFIG_BFQ_CGROUP_DEBUG is not set

configs/fedora/generic/CONFIG_BT_HCIBTUSB_MTK

@@ -0,0 +1 @@
+# CONFIG_BT_HCIBTUSB_MTK is not set

configs/fedora/generic/CONFIG_CEPH_FS_SECURITY_LABEL

@@ -0,0 +1 @@
+CONFIG_CEPH_FS_SECURITY_LABEL=y

configs/fedora/generic/CONFIG_CHR_DEV_OSST

@@ -1 +0,0 @@
-CONFIG_CHR_DEV_OSST=m

configs/fedora/generic/CONFIG_CIFS_ACL

@@ -1 +0,0 @@
-CONFIG_CIFS_ACL=y

configs/fedora/generic/CONFIG_COMMON_CLK_SI5341

@@ -0,0 +1 @@
+# CONFIG_COMMON_CLK_SI5341 is not set

configs/fedora/generic/CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES

@@ -1 +0,0 @@
-CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y

configs/fedora/generic/CONFIG_CROS_EC_ISHTP

@@ -0,0 +1 @@
+CONFIG_CROS_EC_ISHTP=m

configs/fedora/generic/CONFIG_CRYPTO_DEV_ATMEL_ECC

@@ -0,0 +1 @@
+# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set

configs/fedora/generic/CONFIG_CRYPTO_DEV_ATMEL_SHA204A

@@ -0,0 +1 @@
+# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set

configs/fedora/generic/CONFIG_CRYPTO_XXHASH

@@ -0,0 +1 @@
+CONFIG_CRYPTO_XXHASH=m

configs/fedora/generic/CONFIG_CRYPTO_ZSTD

@@ -1 +1 @@
-# CONFIG_CRYPTO_ZSTD is not set
+CONFIG_CRYPTO_ZSTD=m

configs/fedora/generic/CONFIG_DEBUG_BLK_CGROUP

@@ -1 +0,0 @@
-# CONFIG_DEBUG_BLK_CGROUP is not set

configs/fedora/generic/CONFIG_DE_AOC

@@ -1 +0,0 @@
-CONFIG_DE_AOC=y

configs/fedora/generic/CONFIG_DPS310

@@ -0,0 +1 @@
+# CONFIG_DPS310 is not set

configs/fedora/generic/CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS

@@ -0,0 +1 @@
+# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set

configs/fedora/generic/CONFIG_DRM_PANEL_SAMSUNG_S6E63M0

@@ -0,0 +1 @@
+# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set

configs/fedora/generic/CONFIG_DVB_USB_CXUSB_ANALOG

@@ -0,0 +1 @@
+CONFIG_DVB_USB_CXUSB_ANALOG=y

configs/fedora/generic/CONFIG_DW_EDMA

@@ -0,0 +1 @@
+CONFIG_DW_EDMA=m

configs/fedora/generic/CONFIG_DW_EDMA_PCIE

@@ -0,0 +1 @@
+CONFIG_DW_EDMA_PCIE=m

configs/fedora/generic/CONFIG_EXTCON_FSA9480

@@ -0,0 +1 @@
+# CONFIG_EXTCON_FSA9480 is not set

configs/fedora/generic/CONFIG_FMC

@@ -1 +0,0 @@
-CONFIG_FMC=m

configs/fedora/generic/CONFIG_FMC_CHARDEV

@@ -1 +0,0 @@
-CONFIG_FMC_CHARDEV=m

configs/fedora/generic/CONFIG_FMC_FAKEDEV

@@ -1 +0,0 @@
-CONFIG_FMC_FAKEDEV=m

configs/fedora/generic/CONFIG_FMC_TRIVIAL

@@ -1 +0,0 @@
-CONFIG_FMC_TRIVIAL=m

configs/fedora/generic/CONFIG_FMC_WRITE_EEPROM

@@ -1 +0,0 @@
-CONFIG_FMC_WRITE_EEPROM=m

configs/fedora/generic/CONFIG_FSL_ENETC

@@ -1 +0,0 @@
-# CONFIG_FSL_ENETC is not set

configs/fedora/generic/CONFIG_FSL_ENETC_PTP_CLOCK

@@ -1 +0,0 @@
-# CONFIG_FSL_ENETC_PTP_CLOCK is not set

configs/fedora/generic/CONFIG_FSL_ENETC_VF

@@ -1 +0,0 @@
-# CONFIG_FSL_ENETC_VF is not set

configs/fedora/generic/CONFIG_FW_LOADER_COMPRESS

@@ -0,0 +1 @@
+CONFIG_FW_LOADER_COMPRESS=y

configs/fedora/generic/CONFIG_GVE

@@ -0,0 +1 @@
+CONFIG_GVE=m

configs/fedora/generic/CONFIG_HEADERS_INSTALL

@@ -0,0 +1 @@
+# CONFIG_HEADERS_INSTALL is not set

configs/fedora/generic/CONFIG_HEADER_TEST

@@ -0,0 +1 @@
+# CONFIG_HEADER_TEST is not set

configs/fedora/generic/CONFIG_HISAX_16_3

@@ -1 +0,0 @@
-CONFIG_HISAX_16_3=y

configs/fedora/generic/CONFIG_HISAX_1TR6

@@ -1 +0,0 @@
-CONFIG_HISAX_1TR6=y

configs/fedora/generic/CONFIG_HISAX_AVM_A1_CS

@@ -1 +0,0 @@
-CONFIG_HISAX_AVM_A1_CS=m

configs/fedora/generic/CONFIG_HISAX_AVM_A1_PCMCIA

@@ -1 +0,0 @@
-CONFIG_HISAX_AVM_A1_PCMCIA=y

configs/fedora/generic/CONFIG_HISAX_BKM_A4T

@@ -1 +0,0 @@
-CONFIG_HISAX_BKM_A4T=y

configs/fedora/generic/CONFIG_HISAX_DEBUG

@@ -1 +0,0 @@
-# CONFIG_HISAX_DEBUG is not set

configs/fedora/generic/CONFIG_HISAX_DIEHLDIVA

@@ -1 +0,0 @@
-CONFIG_HISAX_DIEHLDIVA=y

configs/fedora/generic/CONFIG_HISAX_ELSA

@@ -1 +0,0 @@
-CONFIG_HISAX_ELSA=y

configs/fedora/generic/CONFIG_HISAX_ELSA_CS

@@ -1 +0,0 @@
-CONFIG_HISAX_ELSA_CS=m

configs/fedora/generic/CONFIG_HISAX_ENTERNOW_PCI

@@ -1 +0,0 @@
-CONFIG_HISAX_ENTERNOW_PCI=y

configs/fedora/generic/CONFIG_HISAX_EURO

@@ -1 +0,0 @@
-CONFIG_HISAX_EURO=y

configs/fedora/generic/CONFIG_HISAX_FRITZPCI

@@ -1 +0,0 @@
-CONFIG_HISAX_FRITZPCI=y

configs/fedora/generic/CONFIG_HISAX_FRITZ_PCIPNP

@@ -1 +0,0 @@
-CONFIG_HISAX_FRITZ_PCIPNP=m

configs/fedora/generic/CONFIG_HISAX_GAZEL

@@ -1 +0,0 @@
-CONFIG_HISAX_GAZEL=y

configs/fedora/generic/CONFIG_HISAX_HFC4S8S

@@ -1 +0,0 @@
-CONFIG_HISAX_HFC4S8S=m

configs/fedora/generic/CONFIG_HISAX_HFCUSB

@@ -1 +0,0 @@
-# CONFIG_HISAX_HFCUSB is not set

configs/fedora/generic/CONFIG_HISAX_HFC_PCI

@@ -1 +0,0 @@
-CONFIG_HISAX_HFC_PCI=y

configs/fedora/generic/CONFIG_HISAX_HFC_SX

@@ -1 +0,0 @@
-CONFIG_HISAX_HFC_SX=y

configs/fedora/generic/CONFIG_HISAX_MAX_CARDS

@@ -1 +0,0 @@
-CONFIG_HISAX_MAX_CARDS=8

configs/fedora/generic/CONFIG_HISAX_NETJET

@@ -1 +0,0 @@
-CONFIG_HISAX_NETJET=y

configs/fedora/generic/CONFIG_HISAX_NETJET_U

@@ -1 +0,0 @@
-CONFIG_HISAX_NETJET_U=y

configs/fedora/generic/CONFIG_HISAX_NI1

@@ -1 +0,0 @@
-CONFIG_HISAX_NI1=y

configs/fedora/generic/CONFIG_HISAX_NICCY

@@ -1 +0,0 @@
-CONFIG_HISAX_NICCY=y

configs/fedora/generic/CONFIG_HISAX_NO_KEYPAD

@@ -1 +0,0 @@
-CONFIG_HISAX_NO_KEYPAD=y

configs/fedora/generic/CONFIG_HISAX_NO_LLC

@@ -1 +0,0 @@
-CONFIG_HISAX_NO_LLC=y

configs/fedora/generic/CONFIG_HISAX_NO_SENDCOMPLETE

@@ -1 +0,0 @@
-CONFIG_HISAX_NO_SENDCOMPLETE=y

configs/fedora/generic/CONFIG_HISAX_S0BOX

@@ -1 +0,0 @@
-CONFIG_HISAX_S0BOX=y

configs/fedora/generic/CONFIG_HISAX_SCT_QUADRO

@@ -1 +0,0 @@
-CONFIG_HISAX_SCT_QUADRO=y

configs/fedora/generic/CONFIG_HISAX_SEDLBAUER

@@ -1 +0,0 @@
-CONFIG_HISAX_SEDLBAUER=y

configs/fedora/generic/CONFIG_HISAX_SEDLBAUER_CS

@@ -1 +0,0 @@
-CONFIG_HISAX_SEDLBAUER_CS=m

configs/fedora/generic/CONFIG_HISAX_ST5481

@@ -1 +0,0 @@
-CONFIG_HISAX_ST5481=m

configs/fedora/generic/CONFIG_HISAX_TELESPCI

@@ -1 +0,0 @@
-CONFIG_HISAX_TELESPCI=y

configs/fedora/generic/CONFIG_HISAX_TELES_CS

@@ -1 +0,0 @@
-CONFIG_HISAX_TELES_CS=m

configs/fedora/generic/CONFIG_HISAX_W6692

@@ -1 +0,0 @@
-CONFIG_HISAX_W6692=y

configs/fedora/generic/CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE

@@ -0,0 +1 @@
+# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set

configs/fedora/generic/CONFIG_IMA_APPRAISE

@@ -1 +1 @@
-# CONFIG_IMA_APPRAISE is not set
+CONFIG_IMA_APPRAISE=y

configs/fedora/generic/CONFIG_IMA_APPRAISE_BOOTPARAM

@@ -0,0 +1 @@
+CONFIG_IMA_APPRAISE_BOOTPARAM=y

configs/fedora/generic/CONFIG_IMA_APPRAISE_BUILD_POLICY

@@ -0,0 +1 @@
+# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set

configs/fedora/generic/CONFIG_IMA_BLACKLIST_KEYRING

@@ -0,0 +1 @@
+# CONFIG_IMA_BLACKLIST_KEYRING is not set

configs/fedora/generic/CONFIG_IMA_DEFAULT_HASH_SHA1

@@ -1 +1 @@
-CONFIG_IMA_DEFAULT_HASH_SHA1=y
+# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set

configs/fedora/generic/CONFIG_IMA_DEFAULT_HASH_SHA256

@@ -1 +1 @@
-# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
+CONFIG_IMA_DEFAULT_HASH_SHA256=y

configs/fedora/generic/CONFIG_IMA_KEXEC

@@ -0,0 +1 @@
+CONFIG_IMA_KEXEC=y

configs/fedora/generic/CONFIG_IMA_LOAD_X509

@@ -0,0 +1 @@
+# CONFIG_IMA_LOAD_X509 is not set

configs/fedora/generic/CONFIG_IMA_TRUSTED_KEYRING

@@ -0,0 +1 @@
+# CONFIG_IMA_TRUSTED_KEYRING is not set

configs/fedora/generic/CONFIG_INFINIBAND_NES

@@ -1 +0,0 @@
-CONFIG_INFINIBAND_NES=m

configs/fedora/generic/CONFIG_INFINIBAND_NES_DEBUG

@@ -1 +0,0 @@
-# CONFIG_INFINIBAND_NES_DEBUG is not set

configs/fedora/generic/CONFIG_INIT_ON_ALLOC_DEFAULT_ON

@@ -0,0 +1 @@
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set

configs/fedora/generic/CONFIG_INIT_ON_FREE_DEFAULT_ON

@@ -0,0 +1 @@
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set

configs/fedora/generic/CONFIG_INTEGRITY_TRUSTED_KEYRING

@@ -0,0 +1 @@
+CONFIG_INTEGRITY_TRUSTED_KEYRING=y