rpms/kernel
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d0310083bc
kernel/0001-ARM-sunxi-Add-driver-for-SD-MMC-hosts-found-on-Allwi.patch

2202 lines
63 KiB
Diff
Raw Normal View History

Add patch to support the mmc controller on sunxi arm SoCs
2014-04-25 08:14:10 +00:00
From 528a5cd576861f90f51398c707c602a79623492d Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Thu, 5 Sep 2013 19:52:41 -0300
Subject: [PATCH] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner
sunxi SoCs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Allwinner sunxi mmc host uses dma in bus-master mode using a built-in
designware idmac controller, which is identical to the one found in the mmc-dw
hosts. However the rest of the host is not identical to mmc-dw, it deals with
sending stop commands in hardware which makes it significantly different
from the mmc-dw devices.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
.../devicetree/bindings/mmc/sunxi-mmc.txt | 43 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun4i-a10-a1000.dts | 9 +
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 9 +
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 9 +
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 9 +
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 9 +
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 9 +
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 9 +
arch/arm/boot/dts/sun4i-a10.dtsi | 50 +
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 32 +
arch/arm/boot/dts/sun5i-a10s.dtsi | 41 +
arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 16 +
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 16 +
arch/arm/boot/dts/sun5i-a13.dtsi | 25 +
arch/arm/boot/dts/sun6i-a31-m9.dts | 46 +
arch/arm/boot/dts/sun6i-a31.dtsi | 91 ++
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 9 +
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 40 +
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 25 +
arch/arm/boot/dts/sun7i-a20.dtsi | 57 +
drivers/clk/sunxi/clk-factors.c | 36 +
drivers/clk/sunxi/clk-sunxi.c | 36 +
drivers/mmc/host/Kconfig | 7 +
drivers/mmc/host/Makefile | 2 +
drivers/mmc/host/sunxi-mmc.c | 1125 ++++++++++++++++++++
include/linux/clk/sunxi.h | 22 +
27 files changed, 1783 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
create mode 100644 arch/arm/boot/dts/sun6i-a31-m9.dts
create mode 100644 drivers/mmc/host/sunxi-mmc.c
create mode 100644 include/linux/clk/sunxi.h
diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
new file mode 100644
index 0000000..f0c06e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
@@ -0,0 +1,43 @@
+* Allwinner sunxi MMC controller
+
+The highspeed MMC host controller on Allwinner SoCs provides an interface
+for MMC, SD and SDIO types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.5 as well
+as the speed of SD standard 3.0.
+Absolute maximum transfer rate is 200MB/s
+
+Required properties:
+ - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
+ - reg : mmc controller base registers
+ - clocks : a list with 2 phandle + clock specifier pairs
+ - clock-names : must contain "ahb" and "mod"
+ - interrupts : mmc controller interrupt
+
+Optional properties:
+ - resets : phandle + reset specifier pair
+ - reset-names : must contain "ahb"
+ - for cd, bus-width and additional generic mmc parameters
+ please refer to mmc.txt within this directory
+
+Examples:
+ - Within .dtsi:
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 32 4>;
+ status = "disabled";
+ };
+
+ - Within dts:
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f..1cd137d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -351,6 +351,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun6i-a31-colombus.dtb \
+ sun6i-a31-m9.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-olinuxino-micro.dtb
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index fa746aea..3056db5 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -36,6 +36,15 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 4684cbe..ad9321b 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -34,6 +34,15 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index d7c17e4..62defd5 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -36,6 +36,15 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index fe9272e..d1a9e34 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -24,6 +24,15 @@
};
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index dd84a9e..07a598f 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -20,6 +20,15 @@
compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 66cf0c7..8d5d321 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -33,6 +33,15 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 255b47e..ce02086 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -34,6 +34,15 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 9174724..29fd4f5 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -377,6 +377,42 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <35>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
@@ -529,6 +565,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_a: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
};
timer@01c20c00 {
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 23611b7..de91308 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -35,6 +35,24 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 0>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc1: mmc@01c10000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 13 0>; /* PG13 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
@@ -49,6 +67,20 @@
};
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PE3";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 79989ed..fb345c2 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -338,6 +338,33 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
@@ -451,6 +478,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
+ allwinner,function = "mmc1";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 11169d5..8515f19 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -21,6 +21,15 @@
compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
@@ -35,6 +44,13 @@
};
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxinom: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 7a9187b..51a9438 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -20,6 +20,15 @@
compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
@@ -34,6 +43,13 @@
};
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index f01c315..48ffa51 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -320,6 +320,24 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
@@ -415,6 +433,13 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
new file mode 100644
index 0000000..a188721
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+
+/ {
+ model = "Mele M9 / A1000G Quad top set box";
+ compatible = "mele,m9", "allwinner,sun6i-a31";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+ cd-gpios = <&pio 7 22 0>; /* PH22 */
+ status = "okay";
+ };
+
+ pio: pinctrl@01c20800 {
+ mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index d45efa7..0939fc1 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -198,6 +198,38 @@
"apb2_uart4", "apb2_uart5";
};
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc2";
+ };
+
+ mmc3_clk: clk@01c20094 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20094 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc3";
+ };
+
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -237,6 +269,58 @@
#size-cells = <1>;
ranges;
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb1_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 8>;
+ reset-names = "ahb";
+ interrupts = <0 60 4>;
+ bus-width = <4>;
+ cd-inverted;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb1_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 9>;
+ reset-names = "reset";
+ interrupts = <0 61 4>;
+ bus-width = <4>;
+ cd-inverted;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb1_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 10>;
+ reset-names = "reset";
+ interrupts = <0 62 4>;
+ bus-width = <4>;
+ cd-inverted;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb1_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 11>;
+ reset-names = "reset";
+ interrupts = <0 63 4>;
+ bus-width = <4>;
+ cd-inverted;
+ status = "disabled";
+ };
+
nmi_intc: interrupt-controller@01f00c0c {
compatible = "allwinner,sun6i-a31-sc-nmi";
interrupt-controller;
@@ -286,6 +370,13 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
ahb1_rst: reset@01c202c0 {
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 68de89f..b41aa99 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -20,6 +20,15 @@
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index cb25d3c..270bac0 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -20,6 +20,23 @@
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc3: mmc@01c12000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <&reg_vmmc3>;
+ non-removable;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
@@ -48,6 +65,18 @@
};
pinctrl@01c20800 {
+ mmc3_pins_a: mmc3@0 {
+ /* AP6210 requires pull-up */
+ allwinner,pull = <1>;
+ };
+
+ vmmc3_pin_cubietruck: vmmc3_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
@@ -139,4 +168,15 @@
reg_usb2_vbus: usb2-vbus {
status = "okay";
};
+
+ reg_vmmc3: vmmc3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc3_pin_cubietruck>;
+ regulator-name = "vmmc3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 9 0>;
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index eeadf76..f989554 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -31,6 +31,24 @@
status = "okay";
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_a>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc3: mmc@01c12000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 11 0>; /* PH11 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
@@ -65,6 +83,13 @@
};
pinctrl@01c20800 {
+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 32efc10..99e8336 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -447,6 +447,42 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 32 4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 33 4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 34 4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 35 4>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
@@ -653,6 +689,27 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_a: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc3_pins_a: mmc3@0 {
+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,function = "mmc3";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index 9e23264..3806d97 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
return rate;
}
+static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p)
+{
+ struct clk *clk = hw->clk, *parent, *best_parent = NULL;
+ int i, num_parents;
+ unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
+
+ /* find the parent that can help provide the fastest rate <= rate */
+ num_parents = __clk_get_num_parents(clk);
+ for (i = 0; i < num_parents; i++) {
+ parent = clk_get_parent_by_index(clk, i);
+ if (!parent)
+ continue;
+ if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
+ parent_rate = __clk_round_rate(parent, rate);
+ else
+ parent_rate = __clk_get_rate(parent);
+
+ child_rate = clk_factors_round_rate(hw, rate, &parent_rate);
+
+ if (child_rate <= rate && child_rate > best_child_rate) {
+ best_parent = parent;
+ best = parent_rate;
+ best_child_rate = child_rate;
+ }
+ }
+
+ if (best_parent)
+ *best_parent_p = best_parent;
+ *best_parent_rate = best;
+
+ return best_child_rate;
+}
+
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
}
const struct clk_ops clk_factors_ops = {
+ .determine_rate = clk_factors_determine_rate,
.recalc_rate = clk_factors_recalc_rate,
.round_rate = clk_factors_round_rate,
.set_rate = clk_factors_set_rate,
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index bd7dc73..59f9040 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -507,6 +507,42 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
/**
+ * clk_sunxi_mmc_phase_control() - configures MMC clock phase control
+ */
+
+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output)
+{
+ #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+ struct clk_composite *composite = to_clk_composite(hw);
+ struct clk_hw *rate_hw = composite->rate_hw;
+ struct clk_factors *factors = to_clk_factors(rate_hw);
+ unsigned long flags = 0;
+ u32 reg;
+
+ if (factors->lock)
+ spin_lock_irqsave(factors->lock, flags);
+
+ reg = readl(factors->reg);
+
+ /* set sample clock phase control */
+ reg &= ~(0x7 << 20);
+ reg |= ((sample & 0x7) << 20);
+
+ /* set output clock phase control */
+ reg &= ~(0x7 << 8);
+ reg |= ((output & 0x7) << 8);
+
+ writel(reg, factors->reg);
+
+ if (factors->lock)
+ spin_unlock_irqrestore(factors->lock, flags);
+}
+EXPORT_SYMBOL(clk_sunxi_mmc_phase_control);
+
+
+/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8aaf8c1..d50ac1c 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -694,3 +694,10 @@ config MMC_REALTEK_PCI
help
Say Y here to include driver code to support SD/MMC card interface
of Realtek PCI-E card reader
+
+config MMC_SUNXI
+ tristate "Allwinner sunxi SD/MMC Host Controller support"
+ depends on ARCH_SUNXI
+ help
+ This selects support for the SD/MMC Host Controller on
+ Allwinner sunxi SoCs.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 0c8aa5e..c706c0f 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -53,6 +53,8 @@ obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
+obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
+
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
new file mode 100644
index 0000000..f1de52c
--- /dev/null
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -0,0 +1,1125 @@
+/*
+ * Driver for sunxi SD/MMC host controllers
+ * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd.
+ * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com>
+ * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
+ * (C) Copyright 2013-2014 David Lanzend<6E>rfer <david.lanzendoerfer@o2s.ch>
+ * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include <linux/clk/sunxi.h>
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
+
+/* register offset definitions */
+#define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */
+#define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */
+#define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */
+#define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */
+#define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */
+#define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */
+#define SDXC_REG_CMDR (0x18) /* SMC Command Register */
+#define SDXC_REG_CARG (0x1C) /* SMC Argument Register */
+#define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */
+#define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */
+#define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */
+#define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */
+#define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */
+#define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */
+#define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */
+#define SDXC_REG_STAS (0x3C) /* SMC Status Register */
+#define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */
+#define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */
+#define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */
+#define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */
+#define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */
+#define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */
+#define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */
+#define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */
+#define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */
+#define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */
+#define SDXC_REG_CHDA (0x90)
+#define SDXC_REG_CBDA (0x94)
+
+#define mci_readl(host, reg) \
+ readl((host)->reg_base + SDXC_##reg)
+#define mci_writel(host, reg, value) \
+ writel((value), (host)->reg_base + SDXC_##reg)
+
+/* global control register bits */
+#define SDXC_SOFT_RESET BIT(0)
+#define SDXC_FIFO_RESET BIT(1)
+#define SDXC_DMA_RESET BIT(2)
+#define SDXC_INTERRUPT_ENABLE_BIT BIT(4)
+#define SDXC_DMA_ENABLE_BIT BIT(5)
+#define SDXC_DEBOUNCE_ENABLE_BIT BIT(8)
+#define SDXC_POSEDGE_LATCH_DATA BIT(9)
+#define SDXC_DDR_MODE BIT(10)
+#define SDXC_MEMORY_ACCESS_DONE BIT(29)
+#define SDXC_ACCESS_DONE_DIRECT BIT(30)
+#define SDXC_ACCESS_BY_AHB BIT(31)
+#define SDXC_ACCESS_BY_DMA (0 << 31)
+#define SDXC_HARDWARE_RESET \
+ (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET)
+
+/* clock control bits */
+#define SDXC_CARD_CLOCK_ON BIT(16)
+#define SDXC_LOW_POWER_ON BIT(17)
+
+/* bus width */
+#define SDXC_WIDTH1 0
+#define SDXC_WIDTH4 1
+#define SDXC_WIDTH8 2
+
+/* smc command bits */
+#define SDXC_RESP_EXPIRE BIT(6)
+#define SDXC_LONG_RESPONSE BIT(7)
+#define SDXC_CHECK_RESPONSE_CRC BIT(8)
+#define SDXC_DATA_EXPIRE BIT(9)
+#define SDXC_WRITE BIT(10)
+#define SDXC_SEQUENCE_MODE BIT(11)
+#define SDXC_SEND_AUTO_STOP BIT(12)
+#define SDXC_WAIT_PRE_OVER BIT(13)
+#define SDXC_STOP_ABORT_CMD BIT(14)
+#define SDXC_SEND_INIT_SEQUENCE BIT(15)
+#define SDXC_UPCLK_ONLY BIT(21)
+#define SDXC_READ_CEATA_DEV BIT(22)
+#define SDXC_CCS_EXPIRE BIT(23)
+#define SDXC_ENABLE_BIT_BOOT BIT(24)
+#define SDXC_ALT_BOOT_OPTIONS BIT(25)
+#define SDXC_BOOT_ACK_EXPIRE BIT(26)
+#define SDXC_BOOT_ABORT BIT(27)
+#define SDXC_VOLTAGE_SWITCH BIT(28)
+#define SDXC_USE_HOLD_REGISTER BIT(29)
+#define SDXC_START BIT(31)
+
+/* interrupt bits */
+#define SDXC_RESP_ERROR BIT(1)
+#define SDXC_COMMAND_DONE BIT(2)
+#define SDXC_DATA_OVER BIT(3)
+#define SDXC_TX_DATA_REQUEST BIT(4)
+#define SDXC_RX_DATA_REQUEST BIT(5)
+#define SDXC_RESP_CRC_ERROR BIT(6)
+#define SDXC_DATA_CRC_ERROR BIT(7)
+#define SDXC_RESP_TIMEOUT BIT(8)
+#define SDXC_DATA_TIMEOUT BIT(9)
+#define SDXC_VOLTAGE_CHANGE_DONE BIT(10)
+#define SDXC_FIFO_RUN_ERROR BIT(11)
+#define SDXC_HARD_WARE_LOCKED BIT(12)
+#define SDXC_START_BIT_ERROR BIT(13)
+#define SDXC_AUTO_COMMAND_DONE BIT(14)
+#define SDXC_END_BIT_ERROR BIT(15)
+#define SDXC_SDIO_INTERRUPT BIT(16)
+#define SDXC_CARD_INSERT BIT(30)
+#define SDXC_CARD_REMOVE BIT(31)
+#define SDXC_INTERRUPT_ERROR_BIT \
+ (SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | SDXC_DATA_CRC_ERROR | \
+ SDXC_RESP_TIMEOUT | SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \
+ SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | SDXC_END_BIT_ERROR)
+#define SDXC_INTERRUPT_DONE_BIT \
+ (SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \
+ SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE)
+
+/* status */
+#define SDXC_RXWL_FLAG BIT(0)
+#define SDXC_TXWL_FLAG BIT(1)
+#define SDXC_FIFO_EMPTY BIT(2)
+#define SDXC_FIFO_FULL BIT(3)
+#define SDXC_CARD_PRESENT BIT(8)
+#define SDXC_CARD_DATA_BUSY BIT(9)
+#define SDXC_DATA_FSM_BUSY BIT(10)
+#define SDXC_DMA_REQUEST BIT(31)
+#define SDXC_FIFO_SIZE 16
+
+/* Function select */
+#define SDXC_CEATA_ON (0xceaa << 16)
+#define SDXC_SEND_IRQ_RESPONSE BIT(0)
+#define SDXC_SDIO_READ_WAIT BIT(1)
+#define SDXC_ABORT_READ_DATA BIT(2)
+#define SDXC_SEND_CCSD BIT(8)
+#define SDXC_SEND_AUTO_STOPCCSD BIT(9)
+#define SDXC_CEATA_DEV_IRQ_ENABLE BIT(10)
+
+/* IDMA controller bus mod bit field */
+#define SDXC_IDMAC_SOFT_RESET BIT(0)
+#define SDXC_IDMAC_FIX_BURST BIT(1)
+#define SDXC_IDMAC_IDMA_ON BIT(7)
+#define SDXC_IDMAC_REFETCH_DES BIT(31)
+
+/* IDMA status bit field */
+#define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0)
+#define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1)
+#define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2)
+#define SDXC_IDMAC_DESTINATION_INVALID BIT(4)
+#define SDXC_IDMAC_CARD_ERROR_SUM BIT(5)
+#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8)
+#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9)
+#define SDXC_IDMAC_HOST_ABORT_INTERRUPT BIT(10)
+#define SDXC_IDMAC_IDLE (0 << 13)
+#define SDXC_IDMAC_SUSPEND (1 << 13)
+#define SDXC_IDMAC_DESC_READ (2 << 13)
+#define SDXC_IDMAC_DESC_CHECK (3 << 13)
+#define SDXC_IDMAC_READ_REQUEST_WAIT (4 << 13)
+#define SDXC_IDMAC_WRITE_REQUEST_WAIT (5 << 13)
+#define SDXC_IDMAC_READ (6 << 13)
+#define SDXC_IDMAC_WRITE (7 << 13)
+#define SDXC_IDMAC_DESC_CLOSE (8 << 13)
+
+/*
+* If the idma-des-size-bits of property is ie 13, bufsize bits are:
+* Bits 0-12: buf1 size
+* Bits 13-25: buf2 size
+* Bits 26-31: not used
+* Since we only ever set buf1 size, we can simply store it directly.
+*/
+#define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */
+#define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */
+#define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */
+#define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */
+#define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */
+#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */
+#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */
+
+struct sunxi_idma_des {
+ u32 config;
+ u32 buf_size;
+ u32 buf_addr_ptr1;
+ u32 buf_addr_ptr2;
+};
+
+struct sunxi_mmc_host {
+ struct mmc_host *mmc;
+ struct regulator *vmmc;
+ struct reset_control *reset;
+
+ /* IO mapping base */
+ void __iomem *reg_base;
+
+ spinlock_t lock;
+ struct tasklet_struct manual_stop_tasklet;
+
+ /* clock management */
+ struct clk *clk_ahb;
+ struct clk *clk_mod;
+
+ /* ios information */
+ u32 clk_mod_rate;
+ u32 bus_width;
+ u32 idma_des_size_bits;
+ u32 ddr;
+ u32 voltage_switching;
+
+ /* irq */
+ int irq;
+ u32 int_sum;
+ u32 sdio_imask;
+
+ /* flags */
+ bool wait_dma;
+
+ dma_addr_t sg_dma;
+ void *sg_cpu;
+
+ struct mmc_request *mrq;
+ struct mmc_request *manual_stop_mrq;
+ u32 ferror;
+};
+
+static int sunxi_mmc_init_host(struct mmc_host *mmc)
+{
+ u32 rval;
+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc);
+ int ret;
+
+ ret = clk_prepare_enable(smc_host->clk_ahb);
+ if (ret) {
+ dev_err(mmc_dev(smc_host->mmc), "AHB clk err %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(smc_host->clk_mod);
+ if (ret) {
+ dev_err(mmc_dev(smc_host->mmc), "MOD clk err %d\n", ret);
+ clk_disable_unprepare(smc_host->clk_ahb);
+ return ret;
+ }
+
+ if (smc_host->reset) {
+ ret = reset_control_deassert(smc_host->reset);
+ if (ret) {
+ dev_err(mmc_dev(smc_host->mmc), "reset err %d\n", ret);
+ clk_disable_unprepare(smc_host->clk_ahb);
+ clk_disable_unprepare(smc_host->clk_mod);
+ return ret;
+ }
+ }
+
+ /* reset controller */
+ rval = mci_readl(smc_host, REG_GCTRL);
+ rval |= SDXC_HARDWARE_RESET;
+ mci_writel(smc_host, REG_GCTRL, rval);
+
+ mci_writel(smc_host, REG_FTRGL, 0x20070008);
+ mci_writel(smc_host, REG_TMOUT, 0xffffffff);
+ mci_writel(smc_host, REG_IMASK, smc_host->sdio_imask);
+ mci_writel(smc_host, REG_RINTR, 0xffffffff);
+ mci_writel(smc_host, REG_DBGC, 0xdeb);
+ mci_writel(smc_host, REG_FUNS, SDXC_CEATA_ON);
+ mci_writel(smc_host, REG_DLBA, smc_host->sg_dma);
+
+ rval = mci_readl(smc_host, REG_GCTRL);
+ rval |= SDXC_INTERRUPT_ENABLE_BIT;
+ rval &= ~SDXC_ACCESS_DONE_DIRECT;
+ mci_writel(smc_host, REG_GCTRL, rval);
+
+ return 0;
+}
+
+static void sunxi_mmc_exit_host(struct sunxi_mmc_host *smc_host)
+{
+ mci_writel(smc_host, REG_GCTRL, SDXC_HARDWARE_RESET);
+
+ if (smc_host->reset)
+ reset_control_assert(smc_host->reset);
+
+ clk_disable_unprepare(smc_host->clk_ahb);
+ clk_disable_unprepare(smc_host->clk_mod);
+}
+
+/* /\* UHS-I Operation Modes */
+/* * DS 25MHz 12.5MB/s 3.3V */
+/* * HS 50MHz 25MB/s 3.3V */
+/* * SDR12 25MHz 12.5MB/s 1.8V */
+/* * SDR25 50MHz 25MB/s 1.8V */
+/* * SDR50 100MHz 50MB/s 1.8V */
+/* * SDR104 208MHz 104MB/s 1.8V */
+/* * DDR50 50MHz 50MB/s 1.8V */
+/* * MMC Operation Modes */
+/* * DS 26MHz 26MB/s 3/1.8/1.2V */
+/* * HS 52MHz 52MB/s 3/1.8/1.2V */
+/* * HSDDR 52MHz 104MB/s 3/1.8/1.2V */
+/* * HS200 200MHz 200MB/s 1.8/1.2V */
+/* * */
+/* * Spec. Timing */
+/* * SD3.0 */
+/* * Fcclk Tcclk Fsclk Tsclk Tis Tih odly RTis RTih */
+/* * 400K 2.5us 24M 41ns 5ns 5ns 1 2209ns 41ns */
+/* * 25M 40ns 600M 1.67ns 5ns 5ns 3 14.99ns 5.01ns */
+/* * 50M 20ns 600M 1.67ns 6ns 2ns 3 14.99ns 5.01ns */
+/* * 50MDDR 20ns 600M 1.67ns 6ns 0.8ns 2 6.67ns 3.33ns */
+/* * 104M 9.6ns 600M 1.67ns 3ns 0.8ns 1 7.93ns 1.67ns */
+/* * 208M 4.8ns 600M 1.67ns 1.4ns 0.8ns 1 3.33ns 1.67ns */
+
+/* * 25M 40ns 300M 3.33ns 5ns 5ns 2 13.34ns 6.66ns */
+/* * 50M 20ns 300M 3.33ns 6ns 2ns 2 13.34ns 6.66ns */
+/* * 50MDDR 20ns 300M 3.33ns 6ns 0.8ns 1 6.67ns 3.33ns */
+/* * 104M 9.6ns 300M 3.33ns 3ns 0.8ns 0 7.93ns 1.67ns */
+/* * 208M 4.8ns 300M 3.33ns 1.4ns 0.8ns 0 3.13ns 1.67ns */
+
+/* * eMMC4.5 */
+/* * 400K 2.5us 24M 41ns 3ns 3ns 1 2209ns 41ns */
+/* * 25M 40ns 600M 1.67ns 3ns 3ns 3 14.99ns 5.01ns */
+/* * 50M 20ns 600M 1.67ns 3ns 3ns 3 14.99ns 5.01ns */
+/* * 50MDDR 20ns 600M 1.67ns 2.5ns 2.5ns 2 6.67ns 3.33ns */
+/* * 200M 5ns 600M 1.67ns 1.4ns 0.8ns 1 3.33ns 1.67ns */
+/* *\/ */
+
+static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
+ struct mmc_data *data)
+{
+ struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
+ struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma;
+ int i, max_len = (1 << host->idma_des_size_bits);
+
+ for (i = 0; i < data->sg_len; i++) {
+ pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN |
+ SDXC_IDMAC_DES0_DIC;
+
+ if (data->sg[i].length == max_len)
+ pdes[i].buf_size = 0; /* 0 == max_len */
+ else
+ pdes[i].buf_size = data->sg[i].length;
+
+ pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]);
+ pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1];
+ }
+
+ pdes[0].config |= SDXC_IDMAC_DES0_FD;
+ pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD;
+
+ /*
+ * Avoid the io-store starting the idmac hitting io-mem before the
+ * descriptors hit the main-mem.
+ */
+ wmb();
+}
+
+static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data)
+{
+ if (data->flags & MMC_DATA_WRITE)
+ return DMA_TO_DEVICE;
+ else
+ return DMA_FROM_DEVICE;
+}
+
+static int sunxi_mmc_map_dma(struct sunxi_mmc_host *smc_host,
+ struct mmc_data *data)
+{
+ u32 i, dma_len;
+ struct scatterlist *sg;
+
+ dma_len = dma_map_sg(mmc_dev(smc_host->mmc), data->sg, data->sg_len,
+ sunxi_mmc_get_dma_dir(data));
+ if (dma_len == 0) {
+ dev_err(mmc_dev(smc_host->mmc), "dma_map_sg failed\n");
+ return -ENOMEM;
+ }
+
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->offset & 3 || sg->length & 3) {
+ dev_err(mmc_dev(smc_host->mmc),
+ "unaligned scatterlist: os %x length %d\n",
+ sg->offset, sg->length);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void sunxi_mmc_start_dma(struct sunxi_mmc_host *smc_host,
+ struct mmc_data *data)
+{
+ u32 rval;
+
+ sunxi_mmc_init_idma_des(smc_host, data);
+
+ rval = mci_readl(smc_host, REG_GCTRL);
+ rval |= SDXC_DMA_ENABLE_BIT;
+ mci_writel(smc_host, REG_GCTRL, rval);
+ rval |= SDXC_DMA_RESET;
+ mci_writel(smc_host, REG_GCTRL, rval);
+
+ mci_writel(smc_host, REG_DMAC, SDXC_IDMAC_SOFT_RESET);
+
+ if (!(data->flags & MMC_DATA_WRITE))
+ mci_writel(smc_host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT);
+
+ mci_writel(smc_host, REG_DMAC,
+ SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON);
+}
+
+static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host,
+ struct mmc_request *req)
+{
+ u32 cmd_val = SDXC_START | SDXC_RESP_EXPIRE | SDXC_STOP_ABORT_CMD
+ | SDXC_CHECK_RESPONSE_CRC | MMC_STOP_TRANSMISSION;
+ u32 ri = 0;
+ unsigned long expire = jiffies + msecs_to_jiffies(1000);
+
+ mci_writel(host, REG_CARG, 0);
+ mci_writel(host, REG_CMDR, cmd_val);
+
+ do {
+ ri = mci_readl(host, REG_RINTR);
+ } while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) &&
+ time_before(jiffies, expire));
+
+ if (ri & SDXC_INTERRUPT_ERROR_BIT) {
+ dev_err(mmc_dev(host->mmc), "send stop command failed\n");
+ if (req->stop)
+ req->stop->resp[0] = -ETIMEDOUT;
+ } else {
+ if (req->stop)
+ req->stop->resp[0] = mci_readl(host, REG_RESP0);
+ }
+
+ mci_writel(host, REG_RINTR, 0xffff);
+}
+
+static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *smc_host)
+{
+ struct mmc_command *cmd = smc_host->mrq->cmd;
+ struct mmc_data *data = smc_host->mrq->data;
+
+ /* For some cmds timeout is normal with sd/mmc cards */
+ if ((smc_host->int_sum & SDXC_INTERRUPT_ERROR_BIT) ==
+ SDXC_RESP_TIMEOUT && (cmd->opcode == SD_IO_SEND_OP_COND ||
+ cmd->opcode == SD_IO_RW_DIRECT))
+ return;
+
+ dev_err(mmc_dev(smc_host->mmc),
+ "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n",
+ smc_host->mmc->index, cmd->opcode,
+ data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "",
+ smc_host->int_sum & SDXC_RESP_ERROR ? " RE" : "",
+ smc_host->int_sum & SDXC_RESP_CRC_ERROR ? " RCE" : "",
+ smc_host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "",
+ smc_host->int_sum & SDXC_RESP_TIMEOUT ? " RTO" : "",
+ smc_host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "",
+ smc_host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "",
+ smc_host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "",
+ smc_host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "",
+ smc_host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : ""
+ );
+}
+
+/* Called in interrupt context! */
+static int sunxi_mmc_finalize_request(struct sunxi_mmc_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+
+ mci_writel(host, REG_IMASK, host->sdio_imask);
+ mci_writel(host, REG_IDIE, 0);
+
+ if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) {
+ sunxi_mmc_dump_errinfo(host);
+ mrq->cmd->error = -ETIMEDOUT;
+
+ if (mrq->data)
+ mrq->data->error = -ETIMEDOUT;
+
+ if (mrq->stop)
+ mrq->stop->error = -ETIMEDOUT;
+ } else {
+ if (mrq->cmd->flags & MMC_RSP_136) {
+ mrq->cmd->resp[0] = mci_readl(host, REG_RESP3);
+ mrq->cmd->resp[1] = mci_readl(host, REG_RESP2);
+ mrq->cmd->resp[2] = mci_readl(host, REG_RESP1);
+ mrq->cmd->resp[3] = mci_readl(host, REG_RESP0);
+ } else {
+ mrq->cmd->resp[0] = mci_readl(host, REG_RESP0);
+ }
+
+ if (mrq->data)
+ mrq->data->bytes_xfered =
+ mrq->data->blocks * mrq->data->blksz;
+ }
+
+ if (mrq->data) {
+ struct mmc_data *data = mrq->data;
+ u32 rval;
+
+ mci_writel(host, REG_IDST, 0x337);
+ mci_writel(host, REG_DMAC, 0);
+ rval = mci_readl(host, REG_GCTRL);
+ rval |= SDXC_DMA_RESET;
+ mci_writel(host, REG_GCTRL, rval);
+ rval &= ~SDXC_DMA_ENABLE_BIT;
+ mci_writel(host, REG_GCTRL, rval);
+ rval |= SDXC_FIFO_RESET;
+ mci_writel(host, REG_GCTRL, rval);
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ sunxi_mmc_get_dma_dir(data));
+ }
+
+ mci_writel(host, REG_RINTR, 0xffff);
+
+ dev_dbg(mmc_dev(host->mmc), "req done, resp %08x %08x %08x %08x\n",
+ mrq->cmd->resp[0], mrq->cmd->resp[1],
+ mrq->cmd->resp[2], mrq->cmd->resp[3]);
+
+ host->mrq = NULL;
+ host->int_sum = 0;
+ host->wait_dma = false;
+
+ if (mrq->data && mrq->data->error) {
+ host->manual_stop_mrq = mrq;
+ tasklet_schedule(&host->manual_stop_tasklet);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id)
+{
+ struct sunxi_mmc_host *host = dev_id;
+ struct mmc_request *mrq;
+ bool finalize = false;
+ bool complete = false;
+ bool sdio_int = false;
+ u32 msk_int;
+ u32 idma_int;
+
+ spin_lock(&host->lock);
+
+ idma_int = mci_readl(host, REG_IDST);
+ msk_int = mci_readl(host, REG_MISTA);
+
+ dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n",
+ host->mrq, msk_int, idma_int);
+
+ mrq = host->mrq;
+ if (mrq) {
+ if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT)
+ host->wait_dma = false;
+
+ host->int_sum |= msk_int;
+
+ /* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finalize */
+ if ((host->int_sum & SDXC_RESP_TIMEOUT) &&
+ !(host->int_sum & SDXC_COMMAND_DONE))
+ mci_writel(host, REG_IMASK,
+ host->sdio_imask | SDXC_COMMAND_DONE);
+ /* Don't wait for dma on error */
+ else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT)
+ finalize = true;
+ else if ((host->int_sum & SDXC_INTERRUPT_DONE_BIT) &&
+ !host->wait_dma)
+ finalize = true;
+ }
+
+ if (msk_int & SDXC_SDIO_INTERRUPT)
+ sdio_int = true;
+
+ mci_writel(host, REG_RINTR, msk_int);
+ mci_writel(host, REG_IDST, idma_int);
+
+ if (finalize) {
+ if (sunxi_mmc_finalize_request(host) == 0)
+ complete = true;
+ }
+
+ spin_unlock(&host->lock);
+
+ if (complete)
+ mmc_request_done(host->mmc, mrq);
+
+ if (sdio_int)
+ mmc_signal_sdio_irq(host->mmc);
+
+ return IRQ_HANDLED;
+}
+
+static void sunxi_mmc_manual_stop_tasklet(unsigned long data)
+{
+ struct sunxi_mmc_host *host = (struct sunxi_mmc_host *) data;
+ struct mmc_request *mrq;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&host->lock, iflags);
+ mrq = host->manual_stop_mrq;
+ spin_unlock_irqrestore(&host->lock, iflags);
+
+ if (!mrq) {
+ dev_err(mmc_dev(host->mmc), "no request for manual stop\n");
+ return;
+ }
+
+ dev_err(mmc_dev(host->mmc), "data error, sending stop command\n");
+ sunxi_mmc_send_manual_stop(host, mrq);
+
+ spin_lock_irqsave(&host->lock, iflags);
+ host->manual_stop_mrq = NULL;
+ spin_unlock_irqrestore(&host->lock, iflags);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
+{
+ unsigned long expire = jiffies + msecs_to_jiffies(2000);
+ u32 rval;
+
+ rval = mci_readl(host, REG_CLKCR);
+ rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
+
+ if (oclk_en)
+ rval |= SDXC_CARD_CLOCK_ON;
+
+ mci_writel(host, REG_CLKCR, rval);
+
+ rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER;
+ if (host->voltage_switching)
+ rval |= SDXC_VOLTAGE_SWITCH;
+ mci_writel(host, REG_CMDR, rval);
+
+ do {
+ rval = mci_readl(host, REG_CMDR);
+ } while (time_before(jiffies, expire) && (rval & SDXC_START));
+
+ if (rval & SDXC_START) {
+ dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n");
+ host->ferror = 1;
+ }
+}
+
+static void sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *smc_host,
+ unsigned int rate)
+{
+ u32 newrate, oclk_dly, rval, sclk_dly, src_clk;
+ struct clk_hw *hw = __clk_get_hw(smc_host->clk_mod);
+
+ newrate = clk_round_rate(smc_host->clk_mod, rate);
+ if (smc_host->clk_mod_rate == newrate) {
+ dev_dbg(mmc_dev(smc_host->mmc), "clk already %d, rounded %d\n",
+ rate, newrate);
+ return;
+ }
+
+ dev_dbg(mmc_dev(smc_host->mmc), "setting clk to %d, rounded %d\n",
+ rate, newrate);
+
+ /* setting clock rate */
+ clk_set_rate(smc_host->clk_mod, newrate);
+ smc_host->clk_mod_rate = clk_get_rate(smc_host->clk_mod);
+ dev_dbg(mmc_dev(smc_host->mmc), "clk is now %d\n",
+ smc_host->clk_mod_rate);
+
+ sunxi_mmc_oclk_onoff(smc_host, 0);
+ /* clear internal divider */
+ rval = mci_readl(smc_host, REG_CLKCR);
+ rval &= ~0xff;
+ mci_writel(smc_host, REG_CLKCR, rval);
+
+ /* determine delays */
+ if (rate <= 400000) {
+ oclk_dly = 0;
+ sclk_dly = 7;
+ } else if (rate <= 25000000) {
+ oclk_dly = 0;
+ sclk_dly = 5;
+ } else if (rate <= 50000000) {
+ if (smc_host->ddr) {
+ oclk_dly = 2;
+ sclk_dly = 4;
+ } else {
+ oclk_dly = 3;
+ sclk_dly = 5;
+ }
+ } else {
+ /* rate > 50000000 */
+ oclk_dly = 2;
+ sclk_dly = 4;
+ }
+
+ src_clk = clk_get_rate(clk_get_parent(smc_host->clk_mod));
+ if (src_clk >= 300000000 && src_clk <= 400000000) {
+ if (oclk_dly)
+ oclk_dly--;
+ if (sclk_dly)
+ sclk_dly--;
+ }
+
+ clk_sunxi_mmc_phase_control(hw, sclk_dly, oclk_dly);
+ sunxi_mmc_oclk_onoff(smc_host, 1);
+
+ /* oclk_onoff sets various irq status bits, clear these */
+ mci_writel(smc_host, REG_RINTR,
+ mci_readl(smc_host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT);
+}
+
+static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sunxi_mmc_host *host = mmc_priv(mmc);
+ u32 rval;
+ s32 err;
+
+ /* Set the power state */
+ switch (ios->power_mode) {
+ case MMC_POWER_ON:
+ break;
+
+ case MMC_POWER_UP:
+ if (!IS_ERR(host->vmmc)) {
+ mmc_regulator_set_ocr(host->mmc, host->vmmc, ios->vdd);
+ udelay(200);
+ }
+
+ err = sunxi_mmc_init_host(mmc);
+ if (err) {
+ host->ferror = 1;
+ return;
+ }
+
+ enable_irq(host->irq);
+
+ dev_dbg(mmc_dev(host->mmc), "power on!\n");
+ host->ferror = 0;
+ break;
+
+ case MMC_POWER_OFF:
+ dev_dbg(mmc_dev(host->mmc), "power off!\n");
+ disable_irq(host->irq);
+ sunxi_mmc_exit_host(host);
+ if (!IS_ERR(host->vmmc))
+ mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
+
+ host->ferror = 0;
+ break;
+ }
+
+ /* set bus width */
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ mci_writel(host, REG_WIDTH, SDXC_WIDTH1);
+ host->bus_width = 1;
+ break;
+ case MMC_BUS_WIDTH_4:
+ mci_writel(host, REG_WIDTH, SDXC_WIDTH4);
+ host->bus_width = 4;
+ break;
+ case MMC_BUS_WIDTH_8:
+ mci_writel(host, REG_WIDTH, SDXC_WIDTH8);
+ host->bus_width = 8;
+ break;
+ }
+
+ /* set ddr mode */
+ rval = mci_readl(host, REG_GCTRL);
+ if (ios->timing == MMC_TIMING_UHS_DDR50) {
+ rval |= SDXC_DDR_MODE;
+ host->ddr = 1;
+ } else {
+ rval &= ~SDXC_DDR_MODE;
+ host->ddr = 0;
+ }
+ mci_writel(host, REG_GCTRL, rval);
+
+ /* set up clock */
+ if (ios->clock && ios->power_mode) {
+ dev_dbg(mmc_dev(host->mmc), "ios->clock: %d\n", ios->clock);
+ sunxi_mmc_clk_set_rate(host, ios->clock);
+ usleep_range(50000, 55000);
+ }
+}
+
+static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc);
+ unsigned long flags;
+ u32 imask;
+
+ spin_lock_irqsave(&smc_host->lock, flags);
+
+ imask = mci_readl(smc_host, REG_IMASK);
+ if (enable) {
+ smc_host->sdio_imask = SDXC_SDIO_INTERRUPT;
+ imask |= SDXC_SDIO_INTERRUPT;
+ } else {
+ smc_host->sdio_imask = 0;
+ imask &= ~SDXC_SDIO_INTERRUPT;
+ }
+ mci_writel(smc_host, REG_IMASK, imask);
+ spin_unlock_irqrestore(&smc_host->lock, flags);
+}
+
+static void sunxi_mmc_hw_reset(struct mmc_host *mmc)
+{
+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc);
+ mci_writel(smc_host, REG_HWRST, 0);
+ udelay(10);
+ mci_writel(smc_host, REG_HWRST, 1);
+ udelay(300);
+}
+
+static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sunxi_mmc_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ unsigned long iflags;
+ u32 imask = SDXC_INTERRUPT_ERROR_BIT;
+ u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f);
+ int ret;
+
+ if (!mmc_gpio_get_cd(mmc) || host->ferror) {
+ dev_dbg(mmc_dev(host->mmc), "no medium present\n");
+ mrq->cmd->error = -ENOMEDIUM;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ if (data) {
+ ret = sunxi_mmc_map_dma(host, data);
+ if (ret < 0) {
+ dev_err(mmc_dev(host->mmc), "map DMA failed\n");
+ cmd->error = ret;
+ cmd->data->error = ret;
+ mmc_request_done(host->mmc, mrq);
+ return;
+ }
+ }
+
+ if (cmd->opcode == MMC_GO_IDLE_STATE) {
+ cmd_val |= SDXC_SEND_INIT_SEQUENCE;
+ imask |= SDXC_COMMAND_DONE;
+ }
+
+ if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+ cmd_val |= SDXC_VOLTAGE_SWITCH;
+ imask |= SDXC_VOLTAGE_CHANGE_DONE;
+ host->voltage_switching = 1;
+ sunxi_mmc_oclk_onoff(host, 1);
+ }
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ cmd_val |= SDXC_RESP_EXPIRE;
+ if (cmd->flags & MMC_RSP_136)
+ cmd_val |= SDXC_LONG_RESPONSE;
+ if (cmd->flags & MMC_RSP_CRC)
+ cmd_val |= SDXC_CHECK_RESPONSE_CRC;
+
+ if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) {
+ cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER;
+ if (cmd->data->flags & MMC_DATA_STREAM) {
+ imask |= SDXC_AUTO_COMMAND_DONE;
+ cmd_val |= SDXC_SEQUENCE_MODE |
+ SDXC_SEND_AUTO_STOP;
+ }
+
+ if (cmd->data->stop) {
+ imask |= SDXC_AUTO_COMMAND_DONE;
+ cmd_val |= SDXC_SEND_AUTO_STOP;
+ } else {
+ imask |= SDXC_DATA_OVER;
+ }
+
+ if (cmd->data->flags & MMC_DATA_WRITE)
+ cmd_val |= SDXC_WRITE;
+ else
+ host->wait_dma = true;
+ } else {
+ imask |= SDXC_COMMAND_DONE;
+ }
+ } else {
+ imask |= SDXC_COMMAND_DONE;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n",
+ cmd_val & 0x3f, cmd_val, cmd->arg, imask,
+ mrq->data ? mrq->data->blksz * mrq->data->blocks : 0);
+
+ spin_lock_irqsave(&host->lock, iflags);
+
+ if (host->mrq || host->manual_stop_mrq) {
+ spin_unlock_irqrestore(&host->lock, iflags);
+
+ if (data)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, sunxi_mmc_get_dma_dir(data));
+
+ dev_err(mmc_dev(host->mmc), "request already pending\n");
+ mrq->cmd->error = -EBUSY;
+ mmc_request_done(host->mmc, mrq);
+ return;
+ }
+
+ if (data) {
+ mci_writel(host, REG_BLKSZ, data->blksz);
+ mci_writel(host, REG_BCNTR, data->blksz * data->blocks);
+ sunxi_mmc_start_dma(host, data);
+ }
+
+ host->mrq = mrq;
+ mci_writel(host, REG_IMASK, host->sdio_imask | imask);
+ mci_writel(host, REG_CARG, cmd->arg);
+ mci_writel(host, REG_CMDR, cmd_val);
+
+ spin_unlock_irqrestore(&host->lock, iflags);
+}
+
+static const struct of_device_id sunxi_mmc_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-mmc", },
+ { .compatible = "allwinner,sun5i-a13-mmc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
+
+static struct mmc_host_ops sunxi_mmc_ops = {
+ .request = sunxi_mmc_request,
+ .set_ios = sunxi_mmc_set_ios,
+ .get_ro = mmc_gpio_get_ro,
+ .get_cd = mmc_gpio_get_cd,
+ .enable_sdio_irq = sunxi_mmc_enable_sdio_irq,
+ .hw_reset = sunxi_mmc_hw_reset,
+};
+
+static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc"))
+ host->idma_des_size_bits = 13;
+ else
+ host->idma_des_size_bits = 16;
+
+ host->vmmc = devm_regulator_get_optional(&pdev->dev, "vmmc");
+ if (IS_ERR(host->vmmc) && PTR_ERR(host->vmmc) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ host->reg_base = devm_ioremap_resource(&pdev->dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ if (IS_ERR(host->reg_base))
+ return PTR_ERR(host->reg_base);
+
+ host->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(host->clk_ahb)) {
+ dev_err(&pdev->dev, "Could not get ahb clock\n");
+ return PTR_ERR(host->clk_ahb);
+ }
+
+ host->clk_mod = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(host->clk_mod)) {
+ dev_err(&pdev->dev, "Could not get mod clock\n");
+ return PTR_ERR(host->clk_mod);
+ }
+
+ host->reset = devm_reset_control_get(&pdev->dev, "ahb");
+ if (IS_ERR(host->reset))
+ host->reset = NULL; /* Having a reset controller is optional */
+
+ /*
+ * Sometimes the controller asserts the irq on boot for some reason,
+ * and since it is not clocked there is no way to clear it. So make
+ * sure the controller is in a sane state before enabling irqs.
+ */
+ ret = sunxi_mmc_init_host(host->mmc);
+ if (ret)
+ return ret;
+
+ host->irq = platform_get_irq(pdev, 0);
+ ret = devm_request_irq(&pdev->dev, host->irq, sunxi_mmc_irq, 0,
+ "sunxi-mmc", host);
+ if (ret == 0)
+ disable_irq(host->irq);
+
+ /* And disable the controller again */
+ sunxi_mmc_exit_host(host);
+
+ return ret;
+}
+
+static int sunxi_mmc_probe(struct platform_device *pdev)
+{
+ struct sunxi_mmc_host *host;
+ struct mmc_host *mmc;
+ int ret;
+
+ mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev);
+ if (!mmc) {
+ dev_err(&pdev->dev, "mmc alloc host failed\n");
+ return -ENOMEM;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ spin_lock_init(&host->lock);
+ tasklet_init(&host->manual_stop_tasklet,
+ sunxi_mmc_manual_stop_tasklet, (unsigned long)host);
+
+ ret = sunxi_mmc_resource_request(host, pdev);
+ if (ret)
+ goto error_free_host;
+
+ host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,
+ &host->sg_dma, GFP_KERNEL);
+ if (!host->sg_cpu) {
+ dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n");
+ ret = -ENOMEM;
+ goto error_free_host;
+ }
+
+ mmc->ops = &sunxi_mmc_ops;
+ mmc->max_blk_count = 8192;
+ mmc->max_blk_size = 4096;
+ mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des);
+ mmc->max_seg_size = (1 << host->idma_des_size_bits);
+ mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
+ /* 400kHz ~ 50MHz */
+ mmc->f_min = 400000;
+ mmc->f_max = 50000000;
+ /* available voltages */
+ if (!IS_ERR(host->vmmc))
+ mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vmmc);
+ else
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+ mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto error_free_dma;
+
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto error_free_dma;
+
+ dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq);
+ platform_set_drvdata(pdev, mmc);
+ return 0;
+
+error_free_dma:
+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+error_free_host:
+ mmc_free_host(mmc);
+ return ret;
+}
+
+static int sunxi_mmc_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct sunxi_mmc_host *host = mmc_priv(mmc);
+
+ mmc_remove_host(mmc);
+ sunxi_mmc_exit_host(host);
+ tasklet_disable(&host->manual_stop_tasklet);
+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+ mmc_free_host(mmc);
+
+ return 0;
+}
+
+static struct platform_driver sunxi_mmc_driver = {
+ .driver = {
+ .name = "sunxi-mmc",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(sunxi_mmc_of_match),
+ },
+ .probe = sunxi_mmc_probe,
+ .remove = sunxi_mmc_remove,
+};
+module_platform_driver(sunxi_mmc_driver);
+
+MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Lanzend<6E>rfer <david.lanzendoerfer@o2s.ch>");
+MODULE_ALIAS("platform:sunxi-mmc");
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
new file mode 100644
index 0000000..1ef5c89
--- /dev/null
+++ b/include/linux/clk/sunxi.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+#include <linux/clk.h>
+
+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output);
+
+#endif
--
1.9.0
Reference in New Issue Copy Permalink