kernel/linux-2.6-usb-wwan-update.patch

1638 lines
45 KiB
Diff
Raw Normal View History

2010-07-30 00:19:53 +00:00
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index a0ecb42..71238de 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -485,6 +485,7 @@ config USB_SERIAL_QCAUX
config USB_SERIAL_QUALCOMM
tristate "USB Qualcomm Serial modem"
+ select USB_SERIAL_WWAN
help
Say Y here if you have a Qualcomm USB modem device. These are
usually wireless cellular modems.
@@ -576,8 +577,12 @@ config USB_SERIAL_XIRCOM
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
+config USB_SERIAL_WWAN
+ tristate
+
config USB_SERIAL_OPTION
tristate "USB driver for GSM and CDMA modems"
+ select USB_SERIAL_WWAN
help
Say Y here if you have a GSM or CDMA modem that's connected to USB.
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 83c9e43..7928cf4 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o
+obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 950cb31..10a9276 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -41,35 +41,14 @@
#include <linux/bitops.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include "usb-wwan.h"
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void option_close(struct usb_serial_port *port);
-static void option_dtr_rts(struct usb_serial_port *port, int on);
-
-static int option_startup(struct usb_serial *serial);
-static void option_disconnect(struct usb_serial *serial);
-static void option_release(struct usb_serial *serial);
-static int option_write_room(struct tty_struct *tty);
-
+static int option_send_setup(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *buf, int count);
-static int option_chars_in_buffer(struct tty_struct *tty);
-static void option_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old);
-static int option_tiocmget(struct tty_struct *tty, struct file *file);
-static int option_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear);
-static int option_send_setup(struct usb_serial_port *port);
-#ifdef CONFIG_PM
-static int option_suspend(struct usb_serial *serial, pm_message_t message);
-static int option_resume(struct usb_serial *serial);
-#endif
-
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
#define OPTION_PRODUCT_COLT 0x5000
@@ -746,22 +725,22 @@ static struct usb_serial_driver option_1port_device = {
.id_table = option_ids,
.num_ports = 1,
.probe = option_probe,
- .open = option_open,
- .close = option_close,
- .dtr_rts = option_dtr_rts,
- .write = option_write,
- .write_room = option_write_room,
- .chars_in_buffer = option_chars_in_buffer,
- .set_termios = option_set_termios,
- .tiocmget = option_tiocmget,
- .tiocmset = option_tiocmset,
- .attach = option_startup,
- .disconnect = option_disconnect,
- .release = option_release,
+ .open = usb_wwan_open,
+ .close = usb_wwan_close,
+ .dtr_rts = usb_wwan_dtr_rts,
+ .write = usb_wwan_write,
+ .write_room = usb_wwan_write_room,
+ .chars_in_buffer = usb_wwan_chars_in_buffer,
+ .set_termios = usb_wwan_set_termios,
+ .tiocmget = usb_wwan_tiocmget,
+ .tiocmset = usb_wwan_tiocmset,
+ .attach = usb_wwan_startup,
+ .disconnect = usb_wwan_disconnect,
+ .release = usb_wwan_release,
.read_int_callback = option_instat_callback,
#ifdef CONFIG_PM
- .suspend = option_suspend,
- .resume = option_resume,
+ .suspend = usb_wwan_suspend,
+ .resume = usb_wwan_resume,
#endif
};
@@ -774,13 +753,6 @@ static int debug;
#define IN_BUFLEN 4096
#define OUT_BUFLEN 4096
-struct option_intf_private {
- spinlock_t susp_lock;
- unsigned int suspended:1;
- int in_flight;
- struct option_blacklist_info *blacklist_info;
-};
-
struct option_port_private {
/* Input endpoints and buffer for this port */
struct urb *in_urbs[N_IN_URB];
@@ -837,8 +809,7 @@ module_exit(option_exit);
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- struct option_intf_private *data;
-
+ struct usb_wwan_intf_private *data;
/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
@@ -851,11 +822,13 @@ static int option_probe(struct usb_serial *serial,
serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
return -ENODEV;
- data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL);
+ data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+
if (!data)
return -ENOMEM;
+ data->send_setup = option_send_setup;
spin_lock_init(&data->susp_lock);
- data->blacklist_info = (struct option_blacklist_info*) id->driver_info;
+ data->private = (void *)id->driver_info;
return 0;
}
@@ -876,194 +849,6 @@ static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
return OPTION_BLACKLIST_NONE;
}
-static void option_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
-{
- dbg("%s", __func__);
- /* Doesn't support option setting */
- tty_termios_copy_hw(tty->termios, old_termios);
- option_send_setup(port);
-}
-
-static int option_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct usb_serial_port *port = tty->driver_data;
- unsigned int value;
- struct option_port_private *portdata;
-
- portdata = usb_get_serial_port_data(port);
-
- value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
- ((portdata->dtr_state) ? TIOCM_DTR : 0) |
- ((portdata->cts_state) ? TIOCM_CTS : 0) |
- ((portdata->dsr_state) ? TIOCM_DSR : 0) |
- ((portdata->dcd_state) ? TIOCM_CAR : 0) |
- ((portdata->ri_state) ? TIOCM_RNG : 0);
-
- return value;
-}
-
-static int option_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct option_port_private *portdata;
-
- portdata = usb_get_serial_port_data(port);
-
- /* FIXME: what locks portdata fields ? */
- if (set & TIOCM_RTS)
- portdata->rts_state = 1;
- if (set & TIOCM_DTR)
- portdata->dtr_state = 1;
-
- if (clear & TIOCM_RTS)
- portdata->rts_state = 0;
- if (clear & TIOCM_DTR)
- portdata->dtr_state = 0;
- return option_send_setup(port);
-}
-
-/* Write */
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *buf, int count)
-{
- struct option_port_private *portdata;
- struct option_intf_private *intfdata;
- int i;
- int left, todo;
- struct urb *this_urb = NULL; /* spurious */
- int err;
- unsigned long flags;
-
- portdata = usb_get_serial_port_data(port);
- intfdata = port->serial->private;
-
- dbg("%s: write (%d chars)", __func__, count);
-
- i = 0;
- left = count;
- for (i = 0; left > 0 && i < N_OUT_URB; i++) {
- todo = left;
- if (todo > OUT_BUFLEN)
- todo = OUT_BUFLEN;
-
- this_urb = portdata->out_urbs[i];
- if (test_and_set_bit(i, &portdata->out_busy)) {
- if (time_before(jiffies,
- portdata->tx_start_time[i] + 10 * HZ))
- continue;
- usb_unlink_urb(this_urb);
- continue;
- }
- dbg("%s: endpoint %d buf %d", __func__,
- usb_pipeendpoint(this_urb->pipe), i);
-
- err = usb_autopm_get_interface_async(port->serial->interface);
- if (err < 0)
- break;
-
- /* send the data */
- memcpy(this_urb->transfer_buffer, buf, todo);
- this_urb->transfer_buffer_length = todo;
-
- spin_lock_irqsave(&intfdata->susp_lock, flags);
- if (intfdata->suspended) {
- usb_anchor_urb(this_urb, &portdata->delayed);
- spin_unlock_irqrestore(&intfdata->susp_lock, flags);
- } else {
- intfdata->in_flight++;
- spin_unlock_irqrestore(&intfdata->susp_lock, flags);
- err = usb_submit_urb(this_urb, GFP_ATOMIC);
- if (err) {
- dbg("usb_submit_urb %p (write bulk) failed "
- "(%d)", this_urb, err);
- clear_bit(i, &portdata->out_busy);
- spin_lock_irqsave(&intfdata->susp_lock, flags);
- intfdata->in_flight--;
- spin_unlock_irqrestore(&intfdata->susp_lock, flags);
- continue;
- }
- }
-
- portdata->tx_start_time[i] = jiffies;
- buf += todo;
- left -= todo;
- }
-
- count -= left;
- dbg("%s: wrote (did %d)", __func__, count);
- return count;
-}
-
-static void option_indat_callback(struct urb *urb)
-{
- int err;
- int endpoint;
- struct usb_serial_port *port;
- struct tty_struct *tty;
- unsigned char *data = urb->transfer_buffer;
- int status = urb->status;
-
- dbg("%s: %p", __func__, urb);
-
- endpoint = usb_pipeendpoint(urb->pipe);
- port = urb->context;
-
- if (status) {
- dbg("%s: nonzero status: %d on endpoint %02x.",
- __func__, status, endpoint);
- } else {
- tty = tty_port_tty_get(&port->port);
- if (urb->actual_length) {
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
- } else
- dbg("%s: empty read urb received", __func__);
- tty_kref_put(tty);
-
- /* Resubmit urb so we continue receiving */
- if (status != -ESHUTDOWN) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err && err != -EPERM)
- printk(KERN_ERR "%s: resubmit read urb failed. "
- "(%d)", __func__, err);
- else
- usb_mark_last_busy(port->serial->dev);
- }
-
- }
- return;
-}
-
-static void option_outdat_callback(struct urb *urb)
-{
- struct usb_serial_port *port;
- struct option_port_private *portdata;
- struct option_intf_private *intfdata;
- int i;
-
- dbg("%s", __func__);
-
- port = urb->context;
- intfdata = port->serial->private;
-
- usb_serial_port_softint(port);
- usb_autopm_put_interface_async(port->serial->interface);
- portdata = usb_get_serial_port_data(port);
- spin_lock(&intfdata->susp_lock);
- intfdata->in_flight--;
- spin_unlock(&intfdata->susp_lock);
-
- for (i = 0; i < N_OUT_URB; ++i) {
- if (portdata->out_urbs[i] == urb) {
- smp_mb__before_clear_bit();
- clear_bit(i, &portdata->out_busy);
- break;
- }
- }
-}
-
static void option_instat_callback(struct urb *urb)
{
int err;
@@ -1120,183 +905,6 @@ static void option_instat_callback(struct urb *urb)
}
}
-static int option_write_room(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct option_port_private *portdata;
- int i;
- int data_len = 0;
- struct urb *this_urb;
-
- portdata = usb_get_serial_port_data(port);
-
- for (i = 0; i < N_OUT_URB; i++) {
- this_urb = portdata->out_urbs[i];
- if (this_urb && !test_bit(i, &portdata->out_busy))
- data_len += OUT_BUFLEN;
- }
-
- dbg("%s: %d", __func__, data_len);
- return data_len;
-}
-
-static int option_chars_in_buffer(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct option_port_private *portdata;
- int i;
- int data_len = 0;
- struct urb *this_urb;
-
- portdata = usb_get_serial_port_data(port);
-
- for (i = 0; i < N_OUT_URB; i++) {
- this_urb = portdata->out_urbs[i];
- /* FIXME: This locking is insufficient as this_urb may
- go unused during the test */
- if (this_urb && test_bit(i, &portdata->out_busy))
- data_len += this_urb->transfer_buffer_length;
- }
- dbg("%s: %d", __func__, data_len);
- return data_len;
-}
-
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
- struct option_port_private *portdata;
- struct option_intf_private *intfdata;
- struct usb_serial *serial = port->serial;
- int i, err;
- struct urb *urb;
-
- portdata = usb_get_serial_port_data(port);
- intfdata = serial->private;
-
- dbg("%s", __func__);
-
- /* Start reading from the IN endpoint */
- for (i = 0; i < N_IN_URB; i++) {
- urb = portdata->in_urbs[i];
- if (!urb)
- continue;
- err = usb_submit_urb(urb, GFP_KERNEL);
- if (err) {
- dbg("%s: submit urb %d failed (%d) %d",
- __func__, i, err,
- urb->transfer_buffer_length);
- }
- }
-
- option_send_setup(port);
-
- serial->interface->needs_remote_wakeup = 1;
- spin_lock_irq(&intfdata->susp_lock);
- portdata->opened = 1;
- spin_unlock_irq(&intfdata->susp_lock);
- usb_autopm_put_interface(serial->interface);
-
- return 0;
-}
-
-static void option_dtr_rts(struct usb_serial_port *port, int on)
-{
- struct usb_serial *serial = port->serial;
- struct option_port_private *portdata;
-
- dbg("%s", __func__);
- portdata = usb_get_serial_port_data(port);
- mutex_lock(&serial->disc_mutex);
- portdata->rts_state = on;
- portdata->dtr_state = on;
- if (serial->dev)
- option_send_setup(port);
- mutex_unlock(&serial->disc_mutex);
-}
-
-
-static void option_close(struct usb_serial_port *port)
-{
- int i;
- struct usb_serial *serial = port->serial;
- struct option_port_private *portdata;
- struct option_intf_private *intfdata = port->serial->private;
-
- dbg("%s", __func__);
- portdata = usb_get_serial_port_data(port);
-
- if (serial->dev) {
- /* Stop reading/writing urbs */
- spin_lock_irq(&intfdata->susp_lock);
- portdata->opened = 0;
- spin_unlock_irq(&intfdata->susp_lock);
-
- for (i = 0; i < N_IN_URB; i++)
- usb_kill_urb(portdata->in_urbs[i]);
- for (i = 0; i < N_OUT_URB; i++)
- usb_kill_urb(portdata->out_urbs[i]);
- usb_autopm_get_interface(serial->interface);
- serial->interface->needs_remote_wakeup = 0;
- }
-}
-
-/* Helper functions used by option_setup_urbs */
-static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
- int dir, void *ctx, char *buf, int len,
- void (*callback)(struct urb *))
-{
- struct urb *urb;
-
- if (endpoint == -1)
- return NULL; /* endpoint not needed */
-
- urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
- if (urb == NULL) {
- dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
- return NULL;
- }
-
- /* Fill URB using supplied data. */
- usb_fill_bulk_urb(urb, serial->dev,
- usb_sndbulkpipe(serial->dev, endpoint) | dir,
- buf, len, callback, ctx);
-
- return urb;
-}
-
-/* Setup urbs */
-static void option_setup_urbs(struct usb_serial *serial)
-{
- int i, j;
- struct usb_serial_port *port;
- struct option_port_private *portdata;
-
- dbg("%s", __func__);
-
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = usb_get_serial_port_data(port);
-
- /* Do indat endpoints first */
- for (j = 0; j < N_IN_URB; ++j) {
- portdata->in_urbs[j] = option_setup_urb(serial,
- port->bulk_in_endpointAddress,
- USB_DIR_IN, port,
- portdata->in_buffer[j],
- IN_BUFLEN, option_indat_callback);
- }
-
- /* outdat endpoints */
- for (j = 0; j < N_OUT_URB; ++j) {
- portdata->out_urbs[j] = option_setup_urb(serial,
- port->bulk_out_endpointAddress,
- USB_DIR_OUT, port,
- portdata->out_buffer[j],
- OUT_BUFLEN, option_outdat_callback);
- }
- }
-}
-
-
/** send RTS/DTR state to the port.
*
* This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
@@ -1305,15 +913,16 @@ static void option_setup_urbs(struct usb_serial *serial)
static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- struct option_intf_private *intfdata =
- (struct option_intf_private *) serial->private;
+ struct usb_wwan_intf_private *intfdata =
+ (struct usb_wwan_intf_private *) serial->private;
struct option_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
int val = 0;
dbg("%s", __func__);
- if (is_blacklisted(ifNum, intfdata->blacklist_info) ==
- OPTION_BLACKLIST_SENDSETUP) {
+ if (is_blacklisted(ifNum,
+ (struct option_blacklist_info *) intfdata->private)
+ == OPTION_BLACKLIST_SENDSETUP) {
dbg("No send_setup on blacklisted interface #%d\n", ifNum);
return -EIO;
}
@@ -1330,224 +939,6 @@ static int option_send_setup(struct usb_serial_port *port)
0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
-static int option_startup(struct usb_serial *serial)
-{
- int i, j, err;
- struct usb_serial_port *port;
- struct option_port_private *portdata;
- u8 *buffer;
-
- dbg("%s", __func__);
-
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
- if (!portdata) {
- dbg("%s: kmalloc for option_port_private (%d) failed!.",
- __func__, i);
- return 1;
- }
- init_usb_anchor(&portdata->delayed);
-
- for (j = 0; j < N_IN_URB; j++) {
- buffer = (u8 *)__get_free_page(GFP_KERNEL);
- if (!buffer)
- goto bail_out_error;
- portdata->in_buffer[j] = buffer;
- }
-
- for (j = 0; j < N_OUT_URB; j++) {
- buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
- if (!buffer)
- goto bail_out_error2;
- portdata->out_buffer[j] = buffer;
- }
-
- usb_set_serial_port_data(port, portdata);
-
- if (!port->interrupt_in_urb)
- continue;
- err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (err)
- dbg("%s: submit irq_in urb failed %d",
- __func__, err);
- }
- option_setup_urbs(serial);
- return 0;
-
-bail_out_error2:
- for (j = 0; j < N_OUT_URB; j++)
- kfree(portdata->out_buffer[j]);
-bail_out_error:
- for (j = 0; j < N_IN_URB; j++)
- if (portdata->in_buffer[j])
- free_page((unsigned long)portdata->in_buffer[j]);
- kfree(portdata);
- return 1;
-}
-
-static void stop_read_write_urbs(struct usb_serial *serial)
-{
- int i, j;
- struct usb_serial_port *port;
- struct option_port_private *portdata;
-
- /* Stop reading/writing urbs */
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- portdata = usb_get_serial_port_data(port);
- for (j = 0; j < N_IN_URB; j++)
- usb_kill_urb(portdata->in_urbs[j]);
- for (j = 0; j < N_OUT_URB; j++)
- usb_kill_urb(portdata->out_urbs[j]);
- }
-}
-
-static void option_disconnect(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-
- stop_read_write_urbs(serial);
-}
-
-static void option_release(struct usb_serial *serial)
-{
- int i, j;
- struct usb_serial_port *port;
- struct option_port_private *portdata;
-
- dbg("%s", __func__);
-
- /* Now free them */
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- portdata = usb_get_serial_port_data(port);
-
- for (j = 0; j < N_IN_URB; j++) {
- if (portdata->in_urbs[j]) {
- usb_free_urb(portdata->in_urbs[j]);
- free_page((unsigned long)
- portdata->in_buffer[j]);
- portdata->in_urbs[j] = NULL;
- }
- }
- for (j = 0; j < N_OUT_URB; j++) {
- if (portdata->out_urbs[j]) {
- usb_free_urb(portdata->out_urbs[j]);
- kfree(portdata->out_buffer[j]);
- portdata->out_urbs[j] = NULL;
- }
- }
- }
-
- /* Now free per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- kfree(usb_get_serial_port_data(port));
- }
-}
-
-#ifdef CONFIG_PM
-static int option_suspend(struct usb_serial *serial, pm_message_t message)
-{
- struct option_intf_private *intfdata = serial->private;
- int b;
-
- dbg("%s entered", __func__);
-
- if (message.event & PM_EVENT_AUTO) {
- spin_lock_irq(&intfdata->susp_lock);
- b = intfdata->in_flight;
- spin_unlock_irq(&intfdata->susp_lock);
-
- if (b)
- return -EBUSY;
- }
-
- spin_lock_irq(&intfdata->susp_lock);
- intfdata->suspended = 1;
- spin_unlock_irq(&intfdata->susp_lock);
- stop_read_write_urbs(serial);
-
- return 0;
-}
-
-static void play_delayed(struct usb_serial_port *port)
-{
- struct option_intf_private *data;
- struct option_port_private *portdata;
- struct urb *urb;
- int err;
-
- portdata = usb_get_serial_port_data(port);
- data = port->serial->private;
- while ((urb = usb_get_from_anchor(&portdata->delayed))) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (!err)
- data->in_flight++;
- }
-}
-
-static int option_resume(struct usb_serial *serial)
-{
- int i, j;
- struct usb_serial_port *port;
- struct option_intf_private *intfdata = serial->private;
- struct option_port_private *portdata;
- struct urb *urb;
- int err = 0;
-
- dbg("%s entered", __func__);
- /* get the interrupt URBs resubmitted unconditionally */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- if (!port->interrupt_in_urb) {
- dbg("%s: No interrupt URB for port %d", __func__, i);
- continue;
- }
- err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
- dbg("Submitted interrupt URB for port %d (result %d)", i, err);
- if (err < 0) {
- err("%s: Error %d for interrupt URB of port%d",
- __func__, err, i);
- goto err_out;
- }
- }
-
- for (i = 0; i < serial->num_ports; i++) {
- /* walk all ports */
- port = serial->port[i];
- portdata = usb_get_serial_port_data(port);
-
- /* skip closed ports */
- spin_lock_irq(&intfdata->susp_lock);
- if (!portdata->opened) {
- spin_unlock_irq(&intfdata->susp_lock);
- continue;
- }
-
- for (j = 0; j < N_IN_URB; j++) {
- urb = portdata->in_urbs[j];
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err < 0) {
- err("%s: Error %d for bulk URB %d",
- __func__, err, i);
- spin_unlock_irq(&intfdata->susp_lock);
- goto err_out;
- }
- }
- play_delayed(port);
- spin_unlock_irq(&intfdata->susp_lock);
- }
- spin_lock_irq(&intfdata->susp_lock);
- intfdata->suspended = 0;
- spin_unlock_irq(&intfdata->susp_lock);
-err_out:
- return err;
-}
-#endif
-
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 53a2d5a..9e55ef5 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -15,6 +15,7 @@
#include <linux/tty_flip.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include "usb-wwan.h"
#define DRIVER_AUTHOR "Qualcomm Inc"
#define DRIVER_DESC "Qualcomm USB Serial driver"
@@ -76,6 +77,8 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x16d8, 0x8001)}, /* CMDTech Gobi 2000 QDL device (VU922) */
{USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
+ {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */
+ {USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -92,6 +95,8 @@ static struct usb_driver qcdriver = {
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
+ struct usb_wwan_intf_private *data;
+ struct usb_host_interface *intf = serial->interface->cur_altsetting;
int retval = -ENODEV;
__u8 nintf;
__u8 ifnum;
@@ -100,33 +105,45 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
nintf = serial->dev->actconfig->desc.bNumInterfaces;
dbg("Num Interfaces = %d", nintf);
- ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ ifnum = intf->desc.bInterfaceNumber;
dbg("This Interface = %d", ifnum);
+ data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->susp_lock);
+
switch (nintf) {
case 1:
/* QDL mode */
- if (serial->interface->num_altsetting == 2) {
- struct usb_host_interface *intf;
-
+ /* Gobi 2000 has a single altsetting, older ones have two */
+ if (serial->interface->num_altsetting == 2)
intf = &serial->interface->altsetting[1];
- if (intf->desc.bNumEndpoints == 2) {
- if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
- usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
- dbg("QDL port found");
- retval = usb_set_interface(serial->dev, ifnum, 1);
- if (retval < 0) {
- dev_err(&serial->dev->dev,
- "Could not set interface, error %d\n",
- retval);
- retval = -ENODEV;
- }
- return retval;
- }
+ else if (serial->interface->num_altsetting > 2)
+ break;
+
+ if (intf->desc.bNumEndpoints == 2 &&
+ usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+ usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+ dbg("QDL port found");
+
+ if (serial->interface->num_altsetting == 1)
+ return 0;
+
+ retval = usb_set_interface(serial->dev, ifnum, 1);
+ if (retval < 0) {
+ dev_err(&serial->dev->dev,
+ "Could not set interface, error %d\n",
+ retval);
+ retval = -ENODEV;
}
+ return retval;
}
break;
+ case 3:
case 4:
/* Composite mode */
if (ifnum == 2) {
@@ -161,6 +178,18 @@ static struct usb_serial_driver qcdevice = {
.usb_driver = &qcdriver,
.num_ports = 1,
.probe = qcprobe,
+ .open = usb_wwan_open,
+ .close = usb_wwan_close,
+ .write = usb_wwan_write,
+ .write_room = usb_wwan_write_room,
+ .chars_in_buffer = usb_wwan_chars_in_buffer,
+ .attach = usb_wwan_startup,
+ .disconnect = usb_wwan_disconnect,
+ .release = usb_wwan_release,
+#ifdef CONFIG_PM
+ .suspend = usb_wwan_suspend,
+ .resume = usb_wwan_resume,
+#endif
};
static int __init qcinit(void)
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
new file mode 100644
index 0000000..2be298a
--- /dev/null
+++ b/drivers/usb/serial/usb-wwan.h
@@ -0,0 +1,67 @@
+/*
+ * Definitions for USB serial mobile broadband cards
+ */
+
+#ifndef __LINUX_USB_USB_WWAN
+#define __LINUX_USB_USB_WWAN
+
+extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
+extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
+extern void usb_wwan_close(struct usb_serial_port *port);
+extern int usb_wwan_startup(struct usb_serial *serial);
+extern void usb_wwan_disconnect(struct usb_serial *serial);
+extern void usb_wwan_release(struct usb_serial *serial);
+extern int usb_wwan_write_room(struct tty_struct *tty);
+extern void usb_wwan_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old);
+extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
+extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear);
+extern int usb_wwan_send_setup(struct usb_serial_port *port);
+extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+extern int usb_wwan_chars_in_buffer(struct tty_struct *tty);
+#ifdef CONFIG_PM
+extern int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message);
+extern int usb_wwan_resume(struct usb_serial *serial);
+#endif
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 4
+#define IN_BUFLEN 4096
+#define OUT_BUFLEN 4096
+
+struct usb_wwan_intf_private {
+ spinlock_t susp_lock;
+ unsigned int suspended:1;
+ int in_flight;
+ int (*send_setup) (struct usb_serial_port *port);
+ void *private;
+};
+
+struct usb_wwan_port_private {
+ /* Input endpoints and buffer for this port */
+ struct urb *in_urbs[N_IN_URB];
+ u8 *in_buffer[N_IN_URB];
+ /* Output endpoints and buffer for this port */
+ struct urb *out_urbs[N_OUT_URB];
+ u8 *out_buffer[N_OUT_URB];
+ unsigned long out_busy; /* Bit vector of URBs in use */
+ int opened;
+ struct usb_anchor delayed;
+
+ /* Settings for the port */
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
+
+ unsigned long tx_start_time[N_OUT_URB];
+};
+
+#endif /* __LINUX_USB_USB_WWAN */
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
new file mode 100644
index 0000000..1ccf852
--- /dev/null
+++ b/drivers/usb/serial/usb_wwan.c
@@ -0,0 +1,665 @@
+/*
+ USB Driver layer for GSM modems
+
+ Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
+
+ This driver is free software; you can redistribute it and/or modify
+ it under the terms of Version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+ History: see the git log.
+
+ Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+
+ This driver exists because the "normal" serial driver doesn't work too well
+ with GSM modems. Issues:
+ - data loss -- one single Receive URB is not nearly enough
+ - controlling the baud rate doesn't make sense
+*/
+
+#define DRIVER_VERSION "v0.7.2"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "USB Driver for GSM modems"
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "usb-wwan.h"
+
+static int debug;
+
+void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct usb_serial *serial = port->serial;
+ struct usb_wwan_port_private *portdata;
+
+ struct usb_wwan_intf_private *intfdata;
+
+ dbg("%s", __func__);
+
+ intfdata = port->serial->private;
+
+ if (!intfdata->send_setup)
+ return;
+
+ portdata = usb_get_serial_port_data(port);
+ mutex_lock(&serial->disc_mutex);
+ portdata->rts_state = on;
+ portdata->dtr_state = on;
+ if (serial->dev)
+ intfdata->send_setup(port);
+ mutex_unlock(&serial->disc_mutex);
+}
+EXPORT_SYMBOL(usb_wwan_dtr_rts);
+
+void usb_wwan_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+ dbg("%s", __func__);
+
+ /* Doesn't support option setting */
+ tty_termios_copy_hw(tty->termios, old_termios);
+
+ if (intfdata->send_setup)
+ intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_set_termios);
+
+int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned int value;
+ struct usb_wwan_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+
+ value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+ ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+ ((portdata->cts_state) ? TIOCM_CTS : 0) |
+ ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+ ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+ ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+ return value;
+}
+EXPORT_SYMBOL(usb_wwan_tiocmget);
+
+int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_wwan_port_private *portdata;
+ struct usb_wwan_intf_private *intfdata;
+
+ portdata = usb_get_serial_port_data(port);
+ intfdata = port->serial->private;
+
+ if (!intfdata->send_setup)
+ return -EINVAL;
+
+ /* FIXME: what locks portdata fields ? */
+ if (set & TIOCM_RTS)
+ portdata->rts_state = 1;
+ if (set & TIOCM_DTR)
+ portdata->dtr_state = 1;
+
+ if (clear & TIOCM_RTS)
+ portdata->rts_state = 0;
+ if (clear & TIOCM_DTR)
+ portdata->dtr_state = 0;
+ return intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_tiocmset);
+
+/* Write */
+int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+ struct usb_wwan_port_private *portdata;
+ struct usb_wwan_intf_private *intfdata;
+ int i;
+ int left, todo;
+ struct urb *this_urb = NULL; /* spurious */
+ int err;
+ unsigned long flags;
+
+ portdata = usb_get_serial_port_data(port);
+ intfdata = port->serial->private;
+
+ dbg("%s: write (%d chars)", __func__, count);
+
+ i = 0;
+ left = count;
+ for (i = 0; left > 0 && i < N_OUT_URB; i++) {
+ todo = left;
+ if (todo > OUT_BUFLEN)
+ todo = OUT_BUFLEN;
+
+ this_urb = portdata->out_urbs[i];
+ if (test_and_set_bit(i, &portdata->out_busy)) {
+ if (time_before(jiffies,
+ portdata->tx_start_time[i] + 10 * HZ))
+ continue;
+ usb_unlink_urb(this_urb);
+ continue;
+ }
+ dbg("%s: endpoint %d buf %d", __func__,
+ usb_pipeendpoint(this_urb->pipe), i);
+
+ err = usb_autopm_get_interface_async(port->serial->interface);
+ if (err < 0)
+ break;
+
+ /* send the data */
+ memcpy(this_urb->transfer_buffer, buf, todo);
+ this_urb->transfer_buffer_length = todo;
+
+ spin_lock_irqsave(&intfdata->susp_lock, flags);
+ if (intfdata->suspended) {
+ usb_anchor_urb(this_urb, &portdata->delayed);
+ spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+ } else {
+ intfdata->in_flight++;
+ spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err) {
+ dbg("usb_submit_urb %p (write bulk) failed "
+ "(%d)", this_urb, err);
+ clear_bit(i, &portdata->out_busy);
+ spin_lock_irqsave(&intfdata->susp_lock, flags);
+ intfdata->in_flight--;
+ spin_unlock_irqrestore(&intfdata->susp_lock,
+ flags);
+ continue;
+ }
+ }
+
+ portdata->tx_start_time[i] = jiffies;
+ buf += todo;
+ left -= todo;
+ }
+
+ count -= left;
+ dbg("%s: wrote (did %d)", __func__, count);
+ return count;
+}
+EXPORT_SYMBOL(usb_wwan_write);
+
+static void usb_wwan_indat_callback(struct urb *urb)
+{
+ int err;
+ int endpoint;
+ struct usb_serial_port *port;
+ struct tty_struct *tty;
+ unsigned char *data = urb->transfer_buffer;
+ int status = urb->status;
+
+ dbg("%s: %p", __func__, urb);
+
+ endpoint = usb_pipeendpoint(urb->pipe);
+ port = urb->context;
+
+ if (status) {
+ dbg("%s: nonzero status: %d on endpoint %02x.",
+ __func__, status, endpoint);
+ } else {
+ tty = tty_port_tty_get(&port->port);
+ if (urb->actual_length) {
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ tty_flip_buffer_push(tty);
+ } else
+ dbg("%s: empty read urb received", __func__);
+ tty_kref_put(tty);
+
+ /* Resubmit urb so we continue receiving */
+ if (status != -ESHUTDOWN) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err && err != -EPERM)
+ printk(KERN_ERR "%s: resubmit read urb failed. "
+ "(%d)", __func__, err);
+ else
+ usb_mark_last_busy(port->serial->dev);
+ }
+
+ }
+ return;
+}
+
+static void usb_wwan_outdat_callback(struct urb *urb)
+{
+ struct usb_serial_port *port;
+ struct usb_wwan_port_private *portdata;
+ struct usb_wwan_intf_private *intfdata;
+ int i;
+
+ dbg("%s", __func__);
+
+ port = urb->context;
+ intfdata = port->serial->private;
+
+ usb_serial_port_softint(port);
+ usb_autopm_put_interface_async(port->serial->interface);
+ portdata = usb_get_serial_port_data(port);
+ spin_lock(&intfdata->susp_lock);
+ intfdata->in_flight--;
+ spin_unlock(&intfdata->susp_lock);
+
+ for (i = 0; i < N_OUT_URB; ++i) {
+ if (portdata->out_urbs[i] == urb) {
+ smp_mb__before_clear_bit();
+ clear_bit(i, &portdata->out_busy);
+ break;
+ }
+ }
+}
+
+int usb_wwan_write_room(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_wwan_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i = 0; i < N_OUT_URB; i++) {
+ this_urb = portdata->out_urbs[i];
+ if (this_urb && !test_bit(i, &portdata->out_busy))
+ data_len += OUT_BUFLEN;
+ }
+
+ dbg("%s: %d", __func__, data_len);
+ return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_write_room);
+
+int usb_wwan_chars_in_buffer(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_wwan_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i = 0; i < N_OUT_URB; i++) {
+ this_urb = portdata->out_urbs[i];
+ /* FIXME: This locking is insufficient as this_urb may
+ go unused during the test */
+ if (this_urb && test_bit(i, &portdata->out_busy))
+ data_len += this_urb->transfer_buffer_length;
+ }
+ dbg("%s: %d", __func__, data_len);
+ return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
+
+int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct usb_wwan_port_private *portdata;
+ struct usb_wwan_intf_private *intfdata;
+ struct usb_serial *serial = port->serial;
+ int i, err;
+ struct urb *urb;
+
+ portdata = usb_get_serial_port_data(port);
+ intfdata = serial->private;
+
+ dbg("%s", __func__);
+
+ /* Start reading from the IN endpoint */
+ for (i = 0; i < N_IN_URB; i++) {
+ urb = portdata->in_urbs[i];
+ if (!urb)
+ continue;
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ dbg("%s: submit urb %d failed (%d) %d",
+ __func__, i, err, urb->transfer_buffer_length);
+ }
+ }
+
+ if (intfdata->send_setup)
+ intfdata->send_setup(port);
+
+ serial->interface->needs_remote_wakeup = 1;
+ spin_lock_irq(&intfdata->susp_lock);
+ portdata->opened = 1;
+ spin_unlock_irq(&intfdata->susp_lock);
+ usb_autopm_put_interface(serial->interface);
+
+ return 0;
+}
+EXPORT_SYMBOL(usb_wwan_open);
+
+void usb_wwan_close(struct usb_serial_port *port)
+{
+ int i;
+ struct usb_serial *serial = port->serial;
+ struct usb_wwan_port_private *portdata;
+ struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+ dbg("%s", __func__);
+ portdata = usb_get_serial_port_data(port);
+
+ if (serial->dev) {
+ /* Stop reading/writing urbs */
+ spin_lock_irq(&intfdata->susp_lock);
+ portdata->opened = 0;
+ spin_unlock_irq(&intfdata->susp_lock);
+
+ for (i = 0; i < N_IN_URB; i++)
+ usb_kill_urb(portdata->in_urbs[i]);
+ for (i = 0; i < N_OUT_URB; i++)
+ usb_kill_urb(portdata->out_urbs[i]);
+ usb_autopm_get_interface(serial->interface);
+ serial->interface->needs_remote_wakeup = 0;
+ }
+}
+EXPORT_SYMBOL(usb_wwan_close);
+
+/* Helper functions used by usb_wwan_setup_urbs */
+static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, char *buf, int len,
+ void (*callback) (struct urb *))
+{
+ struct urb *urb;
+
+ if (endpoint == -1)
+ return NULL; /* endpoint not needed */
+
+ urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
+ if (urb == NULL) {
+ dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
+ return NULL;
+ }
+
+ /* Fill URB using supplied data. */
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+
+ return urb;
+}
+
+/* Setup urbs */
+static void usb_wwan_setup_urbs(struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct usb_wwan_port_private *portdata;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+
+ /* Do indat endpoints first */
+ for (j = 0; j < N_IN_URB; ++j) {
+ portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
+ port->
+ bulk_in_endpointAddress,
+ USB_DIR_IN,
+ port,
+ portdata->
+ in_buffer[j],
+ IN_BUFLEN,
+ usb_wwan_indat_callback);
+ }
+
+ /* outdat endpoints */
+ for (j = 0; j < N_OUT_URB; ++j) {
+ portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
+ port->
+ bulk_out_endpointAddress,
+ USB_DIR_OUT,
+ port,
+ portdata->
+ out_buffer
+ [j],
+ OUT_BUFLEN,
+ usb_wwan_outdat_callback);
+ }
+ }
+}
+
+int usb_wwan_startup(struct usb_serial *serial)
+{
+ int i, j, err;
+ struct usb_serial_port *port;
+ struct usb_wwan_port_private *portdata;
+ u8 *buffer;
+
+ dbg("%s", __func__);
+
+ /* Now setup per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+ if (!portdata) {
+ dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.",
+ __func__, i);
+ return 1;
+ }
+ init_usb_anchor(&portdata->delayed);
+
+ for (j = 0; j < N_IN_URB; j++) {
+ buffer = (u8 *) __get_free_page(GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error;
+ portdata->in_buffer[j] = buffer;
+ }
+
+ for (j = 0; j < N_OUT_URB; j++) {
+ buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error2;
+ portdata->out_buffer[j] = buffer;
+ }
+
+ usb_set_serial_port_data(port, portdata);
+
+ if (!port->interrupt_in_urb)
+ continue;
+ err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (err)
+ dbg("%s: submit irq_in urb failed %d", __func__, err);
+ }
+ usb_wwan_setup_urbs(serial);
+ return 0;
+
+bail_out_error2:
+ for (j = 0; j < N_OUT_URB; j++)
+ kfree(portdata->out_buffer[j]);
+bail_out_error:
+ for (j = 0; j < N_IN_URB; j++)
+ if (portdata->in_buffer[j])
+ free_page((unsigned long)portdata->in_buffer[j]);
+ kfree(portdata);
+ return 1;
+}
+EXPORT_SYMBOL(usb_wwan_startup);
+
+static void stop_read_write_urbs(struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct usb_wwan_port_private *portdata;
+
+ /* Stop reading/writing urbs */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+ for (j = 0; j < N_IN_URB; j++)
+ usb_kill_urb(portdata->in_urbs[j]);
+ for (j = 0; j < N_OUT_URB; j++)
+ usb_kill_urb(portdata->out_urbs[j]);
+ }
+}
+
+void usb_wwan_disconnect(struct usb_serial *serial)
+{
+ dbg("%s", __func__);
+
+ stop_read_write_urbs(serial);
+}
+EXPORT_SYMBOL(usb_wwan_disconnect);
+
+void usb_wwan_release(struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct usb_wwan_port_private *portdata;
+
+ dbg("%s", __func__);
+
+ /* Now free them */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+
+ for (j = 0; j < N_IN_URB; j++) {
+ usb_free_urb(portdata->in_urbs[j]);
+ free_page((unsigned long)
+ portdata->in_buffer[j]);
+ portdata->in_urbs[j] = NULL;
+ }
+ for (j = 0; j < N_OUT_URB; j++) {
+ usb_free_urb(portdata->out_urbs[j]);
+ kfree(portdata->out_buffer[j]);
+ portdata->out_urbs[j] = NULL;
+ }
+ }
+
+ /* Now free per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ kfree(usb_get_serial_port_data(port));
+ }
+}
+EXPORT_SYMBOL(usb_wwan_release);
+
+#ifdef CONFIG_PM
+int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
+{
+ struct usb_wwan_intf_private *intfdata = serial->private;
+ int b;
+
+ dbg("%s entered", __func__);
+
+ if (message.event & PM_EVENT_AUTO) {
+ spin_lock_irq(&intfdata->susp_lock);
+ b = intfdata->in_flight;
+ spin_unlock_irq(&intfdata->susp_lock);
+
+ if (b)
+ return -EBUSY;
+ }
+
+ spin_lock_irq(&intfdata->susp_lock);
+ intfdata->suspended = 1;
+ spin_unlock_irq(&intfdata->susp_lock);
+ stop_read_write_urbs(serial);
+
+ return 0;
+}
+EXPORT_SYMBOL(usb_wwan_suspend);
+
+static void play_delayed(struct usb_serial_port *port)
+{
+ struct usb_wwan_intf_private *data;
+ struct usb_wwan_port_private *portdata;
+ struct urb *urb;
+ int err;
+
+ portdata = usb_get_serial_port_data(port);
+ data = port->serial->private;
+ while ((urb = usb_get_from_anchor(&portdata->delayed))) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (!err)
+ data->in_flight++;
+ }
+}
+
+int usb_wwan_resume(struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct usb_wwan_intf_private *intfdata = serial->private;
+ struct usb_wwan_port_private *portdata;
+ struct urb *urb;
+ int err = 0;
+
+ dbg("%s entered", __func__);
+ /* get the interrupt URBs resubmitted unconditionally */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ if (!port->interrupt_in_urb) {
+ dbg("%s: No interrupt URB for port %d", __func__, i);
+ continue;
+ }
+ err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+ dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+ if (err < 0) {
+ err("%s: Error %d for interrupt URB of port%d",
+ __func__, err, i);
+ goto err_out;
+ }
+ }
+
+ for (i = 0; i < serial->num_ports; i++) {
+ /* walk all ports */
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+
+ /* skip closed ports */
+ spin_lock_irq(&intfdata->susp_lock);
+ if (!portdata->opened) {
+ spin_unlock_irq(&intfdata->susp_lock);
+ continue;
+ }
+
+ for (j = 0; j < N_IN_URB; j++) {
+ urb = portdata->in_urbs[j];
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0) {
+ err("%s: Error %d for bulk URB %d",
+ __func__, err, i);
+ spin_unlock_irq(&intfdata->susp_lock);
+ goto err_out;
+ }
+ }
+ play_delayed(port);
+ spin_unlock_irq(&intfdata->susp_lock);
+ }
+ spin_lock_irq(&intfdata->susp_lock);
+ intfdata->suspended = 0;
+ spin_unlock_irq(&intfdata->susp_lock);
+err_out:
+ return err;
+}
+EXPORT_SYMBOL(usb_wwan_resume);
+#endif
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");