kernel/patch-6.11-redhat.patch

 Makefile                                           |  40 +++
 arch/arm/boot/dts/broadcom/bcm2837.dtsi            |   2 +-
 arch/arm64/Kconfig                                 |   2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      |  16 ++
 arch/arm64/boot/dts/broadcom/Makefile              |   1 +
 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts   |  64 +++++
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi          | 283 +++++++++++++++++++++
 .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts     |  67 +++++
 arch/s390/include/asm/ipl.h                        |   1 +
 arch/s390/kernel/ipl.c                             |   5 +
 arch/s390/kernel/setup.c                           |   4 +
 arch/x86/kernel/setup.c                            |  22 +-
 certs/extract-cert.c                               |  25 +-
 crypto/akcipher.c                                  |   6 +-
 crypto/dh.c                                        |  25 ++
 crypto/seqiv.c                                     |  15 +-
 crypto/testmgr.c                                   |   4 +-
 drivers/acpi/apei/hest.c                           |   8 +
 drivers/acpi/irq.c                                 |  17 +-
 drivers/acpi/scan.c                                |   9 +
 drivers/ata/libahci.c                              |  18 ++
 drivers/char/ipmi/ipmi_dmi.c                       |  15 ++
 drivers/char/ipmi/ipmi_msghandler.c                |  16 +-
 drivers/firmware/efi/Makefile                      |   1 +
 drivers/firmware/efi/efi.c                         | 124 ++++++---
 drivers/firmware/efi/secureboot.c                  |  38 +++
 drivers/hid/hid-lenovo.c                           |   8 +
 drivers/hid/hid-rmi.c                              |  66 -----
 drivers/hwtracing/coresight/coresight-etm4x-core.c |  19 ++
 drivers/input/rmi4/rmi_driver.c                    | 124 +++++----
 drivers/iommu/iommu.c                              |  22 ++
 drivers/net/wireless/realtek/rtw89/pci.c           |  48 +++-
 drivers/pci/quirks.c                               |  24 ++
 drivers/scsi/sd.c                                  |  10 +
 drivers/usb/core/hub.c                             |   7 +
 include/linux/crypto.h                             |   2 +
 include/linux/efi.h                                |  22 +-
 include/linux/lsm_hook_defs.h                      |   2 +
 include/linux/rmi.h                                |   1 +
 include/linux/security.h                           |   5 +
 kernel/module/signing.c                            |   9 +-
 scripts/sign-file.c                                |  29 +--
 scripts/tags.sh                                    |   2 +
 security/integrity/platform_certs/load_uefi.c      |   6 +-
 security/lockdown/Kconfig                          |  13 +
 security/lockdown/lockdown.c                       |   1 +
 security/security.c                                |  12 +
 47 files changed, 1020 insertions(+), 240 deletions(-)

diff --git a/Makefile b/Makefile
index 318a5d60088e0..11471699fb194 100644
--- a/Makefile
+++ b/Makefile
@@ -22,6 +22,18 @@ $(if $(filter __%, $(MAKECMDGOALS)), \
 PHONY := __all
 __all:
 
+# Set RHEL variables
+# Note that this ifdef'ery is required to handle when building with
+# the O= mechanism (relocate the object file results) due to upstream
+# commit 67d7c302 which broke our RHEL include file
+ifneq ($(realpath source),)
+include $(realpath source)/Makefile.rhelver
+else
+ifneq ($(realpath Makefile.rhelver),)
+include Makefile.rhelver
+endif
+endif
+
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.
 #
@@ -333,6 +345,17 @@ ifneq ($(filter install,$(MAKECMDGOALS)),)
     endif
 endif
 
+# CKI/cross compilation hack
+# Do we need to rebuild scripts after cross compilation?
+# If kernel was cross-compiled, these scripts have arch of build host.
+REBUILD_SCRIPTS_FOR_CROSS:=0
+
+# Regenerating config with incomplete source tree will produce different
+# config options. Disable it.
+ifeq ($(REBUILD_SCRIPTS_FOR_CROSS),1)
+may-sync-config:=
+endif
+
 ifdef mixed-build
 # ===========================================================================
 # We're called with mixed targets (*config and build targets).
@@ -1849,6 +1872,23 @@ endif
 
 ifdef CONFIG_MODULES
 
+scripts_build:
+	$(MAKE) $(build)=scripts/basic
+	$(MAKE) $(build)=scripts/mod
+	$(MAKE) $(build)=scripts scripts/module.lds
+	$(MAKE) $(build)=scripts scripts/unifdef
+	$(MAKE) $(build)=scripts
+
+prepare_after_cross:
+	# disable STACK_VALIDATION to avoid building objtool
+	sed -i '/^CONFIG_STACK_VALIDATION/d' ./include/config/auto.conf || true
+	# build minimum set of scripts and resolve_btfids to allow building
+	# external modules
+	$(MAKE) KBUILD_EXTMOD="" M="" scripts_build V=1
+	$(MAKE) -C tools/bpf/resolve_btfids
+
+PHONY += prepare_after_cross scripts_build
+
 $(MODORDER): $(build-dir)
 	@:
 
diff --git a/arch/arm/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
index 84c08b46519da..c281697142b1a 100644
--- a/arch/arm/boot/dts/broadcom/bcm2837.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
@@ -9,7 +9,7 @@ soc {
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 89b331575ed49..1934eeb898044 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1366,7 +1366,7 @@ endchoice
 
 config ARM64_FORCE_52BIT
 	bool "Force 52-bit virtual addresses for userspace"
-	depends on ARM64_VA_BITS_52 && EXPERT
+	depends on ARM64_VA_BITS_52
 	help
 	  For systems with 52-bit userspace VAs enabled, the kernel will attempt
 	  to maintain compatibility with older software by providing 48-bit VAs
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index e868ca5ae753a..a5c3920e0f048 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -263,6 +263,14 @@ gpu0_thermal: gpu0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu0_crit: gpu0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		gpu1_thermal: gpu1-thermal {
@@ -270,6 +278,14 @@ gpu1_thermal: gpu1-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
+
+			trips {
+				gpu1_crit: gpu1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 8b4591ddd27cc..92565e9781ad3 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -6,6 +6,7 @@ DTC_FLAGS := -@
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-4-b.dtb \
 			      bcm2711-rpi-cm4-io.dtb \
+			      bcm2712-rpi-5-b.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
new file mode 100644
index 0000000000000..2bdbb6780242a
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "bcm2712.dtsi"
+
+/ {
+	compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+	model = "Raspberry Pi 5";
+
+	aliases {
+		serial10 = &uart10;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial10:115200n8";
+	};
+
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0x28000000>;
+	};
+
+	sd_io_1v8_reg: sd-io-1v8-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>,
+			 <3300000 0>;
+	};
+
+	sd_vcc_reg: sd-vcc-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
+ * labeled "UART", i.e. the interface with the system console.
+ */
+&uart10 {
+	status = "okay";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
new file mode 100644
index 0000000000000..6e5a984c1d4ea
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm2712";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gicv2>;
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <54000000>;
+		};
+
+		clk_vpu: clk-vpu {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <750000000>;
+			clock-output-names = "vpu-clock";
+		};
+
+		clk_uart: clk-uart {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <9216000>;
+			clock-output-names = "uart-clock";
+		};
+
+		clk_emmc2: clk-emmc2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "emmc2-clock";
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Source for L1 d/i cache-line-size, cache-sets, cache-size
+		 * https://developer.arm.com/documentation/100798/0401/L1-memory-system/About-the-L1-memory-system?lang=en
+		 * Source for L2 cache-line-size and cache-sets:
+		 * https://developer.arm.com/documentation/100798/0401/L2-memory-system/About-the-L2-memory-system?lang=en
+		 * and for cache-size:
+		 * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x000>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l0>;
+
+			l2_cache_l0: l2-cache-l0 {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <128>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l1>;
+
+			l2_cache_l1: l2-cache-l1 {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <128>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l2>;
+
+			l2_cache_l2: l2-cache-l2 {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <128>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l3>;
+
+			l2_cache_l3: l2-cache-l3 {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <128>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		/* Source for cache-line-size and cache-sets:
+		 * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en
+		 * Source for cache-size:
+		 * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+		 */
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		method = "smc";
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+	};
+
+	rmem: reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		atf@0 {
+			reg = <0x0 0x0 0x0 0x80000>;
+			no-map;
+		};
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+			alloc-ranges = <0x0 0x00000000 0x0 0x40000000>;
+		};
+	};
+
+	soc: soc@107c000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000  0x10 0x00000000  0x80000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sdio1: mmc@fff000 {
+			compatible = "brcm,bcm2712-sdhci",
+				     "brcm,sdhci-brcmstb";
+			reg = <0x00fff000 0x260>,
+			      <0x00fff400 0x200>;
+			reg-names = "host", "cfg";
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_emmc2>;
+			clock-names = "sw_sdio";
+			mmc-ddr-3_3v;
+		};
+
+		system_timer: timer@7c003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7c003000 0x1000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <1000000>;
+		};
+
+		mailbox: mailbox@7c013880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7c013880 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <0>;
+		};
+
+		local_intc: interrupt-controller@7cd00000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x7cd00000 0x100>;
+		};
+
+		uart10: serial@7d001000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7d001000 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_uart>, <&clk_vpu>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		interrupt-controller@7d517000 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d517000 0x10>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio_aon: gpio@7d517c00 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x7d517c00 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			brcm,gpio-bank-widths = <17 6>;
+			/* The lack of 'interrupt-controller' property here is intended:
+			 * don't use GIO_AON as an interrupt controller because it will
+			 * clash with the firmware monitoring the PMIC interrupt via the VPU.
+			 */
+		};
+
+		gicv2: interrupt-controller@7fff9000 {
+			compatible = "arm,gic-400";
+			reg = <0x7fff9000 0x1000>,
+			      <0x7fffa000 0x2000>,
+			      <0x7fffc000 0x2000>,
+			      <0x7fffe000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index b27143f81867a..320706c88cdd6 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -592,6 +592,57 @@ vreg_l10d: ldo10 {
 	};
 };
 
+&camss {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			csiphy0_lanes01_ep: endpoint@0 {
+				reg = <0>;
+				clock-lanes = <7>;
+				data-lanes = <0 1>;
+				remote-endpoint = <&ov5675_ep>;
+			};
+		};
+	};
+};
+
+&cci2 {
+	status = "okay";
+};
+
+&cci2_i2c1 {
+	camera@10 {
+		compatible = "ovti,ov5675";
+		reg = <0x10>;
+
+		reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rgb_default>;
+
+		clocks = <&camcc CAMCC_MCLK3_CLK>;
+
+		orientation = <0>;	/* Front facing */
+
+		avdd-supply = <&vreg_l6q>;
+		dvdd-supply = <&vreg_l2q>;
+		dovdd-supply = <&vreg_l7q>;
+
+		port {
+			ov5675_ep: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <450000000>;
+				remote-endpoint = <&csiphy0_lanes01_ep>;
+			};
+		};
+
+	};
+};
+
 &dispcc0 {
 	status = "okay";
 };
@@ -1436,6 +1487,22 @@ cam_indicator_en: cam-indicator-en-state {
 		bias-disable;
 	};
 
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio17";
+			function = "cam_mclk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sc-rgb-xshut-n-pins {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index b0d00032479d6..afb9544fb0074 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -139,6 +139,7 @@ int ipl_report_add_component(struct ipl_report *report, struct kexec_buf *kbuf,
 			     unsigned char flags, unsigned short cert);
 int ipl_report_add_certificate(struct ipl_report *report, void *key,
 			       unsigned long addr, unsigned long len);
+bool ipl_get_secureboot(void);
 
 /*
  * DIAG 308 support
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index f17bb7bf93924..66e530380ee30 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2479,3 +2479,8 @@ int ipl_report_free(struct ipl_report *report)
 }
 
 #endif
+
+bool ipl_get_secureboot(void)
+{
+	return !!ipl_secure_flag;
+}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index a3fea683b2270..a3162d93f437d 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -49,6 +49,7 @@
 #include <linux/memory.h>
 #include <linux/compat.h>
 #include <linux/start_kernel.h>
+#include <linux/security.h>
 #include <linux/hugetlb.h>
 #include <linux/kmemleak.h>
 
@@ -910,6 +911,9 @@ void __init setup_arch(char **cmdline_p)
 
 	log_component_list();
 
+	if (ipl_get_secureboot())
+		security_lock_kernel_down("Secure IPL mode", LOCKDOWN_INTEGRITY_MAX);
+
 	/* Have one command line that is parsed and saved in /proc/cmdline */
 	/* boot_command_line has been already set up in early.c */
 	*cmdline_p = boot_command_line;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6129dc2ba784c..feaf5fd3f37d5 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -21,6 +21,7 @@
 #include <linux/root_dev.h>
 #include <linux/hugetlb.h>
 #include <linux/tboot.h>
+#include <linux/security.h>
 #include <linux/usb/xhci-dbgp.h>
 #include <linux/static_call.h>
 #include <linux/swiotlb.h>
@@ -904,6 +905,13 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled(EFI_BOOT))
 		efi_init();
 
+	efi_set_secure_boot(boot_params.secure_boot);
+
+#ifdef CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT
+	if (efi_enabled(EFI_SECURE_BOOT))
+		security_lock_kernel_down("EFI Secure Boot mode", LOCKDOWN_INTEGRITY_MAX);
+#endif
+
 	reserve_ibft_region();
 	x86_init.resources.dmi_setup();
 
@@ -1065,19 +1073,7 @@ void __init setup_arch(char **cmdline_p)
 	/* Allocate bigger log buffer */
 	setup_log_buf(1);
 
-	if (efi_enabled(EFI_BOOT)) {
-		switch (boot_params.secure_boot) {
-		case efi_secureboot_mode_disabled:
-			pr_info("Secure boot disabled\n");
-			break;
-		case efi_secureboot_mode_enabled:
-			pr_info("Secure boot enabled\n");
-			break;
-		default:
-			pr_info("Secure boot could not be determined\n");
-			break;
-		}
-	}
+	efi_set_secure_boot(boot_params.secure_boot);
 
 	reserve_initrd();
 
diff --git a/certs/extract-cert.c b/certs/extract-cert.c
index 70e9ec89d87d3..f5fb74916cee4 100644
--- a/certs/extract-cert.c
+++ b/certs/extract-cert.c
@@ -21,7 +21,6 @@
 #include <openssl/bio.h>
 #include <openssl/pem.h>
 #include <openssl/err.h>
-#include <openssl/engine.h>
 
 /*
  * OpenSSL 3.0 deprecates the OpenSSL's ENGINE API.
@@ -122,28 +121,8 @@ int main(int argc, char **argv)
 		fclose(f);
 		exit(0);
 	} else if (!strncmp(cert_src, "pkcs11:", 7)) {
-		ENGINE *e;
-		struct {
-			const char *cert_id;
-			X509 *cert;
-		} parms;
-
-		parms.cert_id = cert_src;
-		parms.cert = NULL;
-
-		ENGINE_load_builtin_engines();
-		drain_openssl_errors();
-		e = ENGINE_by_id("pkcs11");
-		ERR(!e, "Load PKCS#11 ENGINE");
-		if (ENGINE_init(e))
-			drain_openssl_errors();
-		else
-			ERR(1, "ENGINE_init");
-		if (key_pass)
-			ERR(!ENGINE_ctrl_cmd_string(e, "PIN", key_pass, 0), "Set PKCS#11 PIN");
-		ENGINE_ctrl_cmd(e, "LOAD_CERT_CTRL", 0, &parms, NULL, 1);
-		ERR(!parms.cert, "Get X.509 from PKCS#11");
-		write_cert(parms.cert);
+		fprintf(stderr, "Error: pkcs11 not implemented\n");
+		exit(1);
 	} else {
 		BIO *b;
 		X509 *x509;
diff --git a/crypto/akcipher.c b/crypto/akcipher.c
index e0ff5f4dda6d6..098a52ded759c 100644
--- a/crypto/akcipher.c
+++ b/crypto/akcipher.c
@@ -126,14 +126,12 @@ int crypto_register_akcipher(struct akcipher_alg *alg)
 {
 	struct crypto_alg *base = &alg->base;
 
-	if (!alg->sign)
-		alg->sign = akcipher_default_op;
+	alg->sign = akcipher_default_op;
 	if (!alg->verify)
 		alg->verify = akcipher_default_op;
 	if (!alg->encrypt)
 		alg->encrypt = akcipher_default_op;
-	if (!alg->decrypt)
-		alg->decrypt = akcipher_default_op;
+	alg->decrypt = akcipher_default_op;
 	if (!alg->set_priv_key)
 		alg->set_priv_key = akcipher_default_set_key;
 
diff --git a/crypto/dh.c b/crypto/dh.c
index 68d11d66c0b54..6e3e515b24526 100644
--- a/crypto/dh.c
+++ b/crypto/dh.c
@@ -227,10 +227,35 @@ static int dh_compute_value(struct kpp_request *req)
 
 		/* SP800-56A rev 3 5.6.2.1.3 key check */
 		} else {
+			MPI val_pct;
+
 			if (dh_is_pubkey_valid(ctx, val)) {
 				ret = -EAGAIN;
 				goto err_free_val;
 			}
+
+			/*
+			 * SP800-56Arev3, 5.6.2.1.4: ("Owner Assurance
+			 * of Pair-wise Consistency"): recompute the
+			 * public key and check if the results match.
+			 */
+			val_pct = mpi_alloc(0);
+			if (!val_pct) {
+				ret = -ENOMEM;
+				goto err_free_val;
+			}
+
+			ret = _compute_val(ctx, base, val_pct);
+			if (ret) {
+				mpi_free(val_pct);
+				goto err_free_val;
+			}
+
+			if (mpi_cmp(val, val_pct) != 0) {
+				fips_fail_notify();
+				panic("dh: pair-wise consistency test failed\n");
+			}
+			mpi_free(val_pct);
 		}
 	}
 
diff --git a/crypto/seqiv.c b/crypto/seqiv.c
index 17e11d51ddc36..9c136a3b62679 100644
--- a/crypto/seqiv.c
+++ b/crypto/seqiv.c
@@ -132,6 +132,19 @@ static int seqiv_aead_decrypt(struct aead_request *req)
 	return crypto_aead_decrypt(subreq);
 }
 
+static int aead_init_seqiv(struct crypto_aead *aead)
+{
+	int err;
+
+	err = aead_init_geniv(aead);
+	if (err)
+		return err;
+
+	crypto_aead_set_flags(aead, CRYPTO_TFM_FIPS_COMPLIANCE);
+
+	return 0;
+}
+
 static int seqiv_aead_create(struct crypto_template *tmpl, struct rtattr **tb)
 {
 	struct aead_instance *inst;
@@ -149,7 +162,7 @@ static int seqiv_aead_create(struct crypto_template *tmpl, struct rtattr **tb)
 	inst->alg.encrypt = seqiv_aead_encrypt;
 	inst->alg.decrypt = seqiv_aead_decrypt;
 
-	inst->alg.init = aead_init_geniv;
+	inst->alg.init = aead_init_seqiv;
 	inst->alg.exit = aead_exit_geniv;
 
 	inst->alg.base.cra_ctxsize = sizeof(struct aead_geniv_ctx);
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index f02cb075bd681..669e306f1cb22 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -4216,7 +4216,7 @@ static int test_akcipher_one(struct crypto_akcipher *tfm,
 	 * Don't invoke (decrypt or sign) test which require a private key
 	 * for vectors with only a public key.
 	 */
-	if (vecs->public_key_vec) {
+	if (1 || vecs->public_key_vec) {
 		err = 0;
 		goto free_all;
 	}
@@ -5093,14 +5093,12 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ecdh-nist-p256",
 		.test = alg_test_kpp,
-		.fips_allowed = 1,
 		.suite = {
 			.kpp = __VECS(ecdh_p256_tv_template)
 		}
 	}, {
 		.alg = "ecdh-nist-p384",
 		.test = alg_test_kpp,
-		.fips_allowed = 1,
 		.suite = {
 			.kpp = __VECS(ecdh_p384_tv_template)
 		}
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 20d757687e3d9..90a13f20f052b 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -142,6 +142,14 @@ static int apei_hest_parse(apei_hest_func_t func, void *data)
 	if (hest_disable || !hest_tab)
 		return -EINVAL;
 
+#ifdef CONFIG_ARM64
+	/* Ignore broken firmware */
+	if (!strncmp(hest_tab->header.oem_id, "HPE   ", 6) &&
+	    !strncmp(hest_tab->header.oem_table_id, "ProLiant", 8) &&
+	    MIDR_IMPLEMENTOR(read_cpuid_id()) == ARM_CPU_IMP_APM)
+		return -EINVAL;
+#endif
+
 	hest_hdr = (struct acpi_hest_header *)(hest_tab + 1);
 	for (i = 0; i < hest_tab->error_source_count; i++) {
 		len = hest_esrc_len(hest_hdr);
diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c
index 1687483ff319e..390b67f19181a 100644
--- a/drivers/acpi/irq.c
+++ b/drivers/acpi/irq.c
@@ -143,6 +143,7 @@ struct acpi_irq_parse_one_ctx {
 	unsigned int index;
 	unsigned long *res_flags;
 	struct irq_fwspec *fwspec;
+	bool skip_producer_check;
 };
 
 /**
@@ -216,7 +217,8 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
 		return AE_CTRL_TERMINATE;
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		eirq = &ares->data.extended_irq;
-		if (eirq->producer_consumer == ACPI_PRODUCER)
+		if (!ctx->skip_producer_check &&
+		    eirq->producer_consumer == ACPI_PRODUCER)
 			return AE_OK;
 		if (ctx->index >= eirq->interrupt_count) {
 			ctx->index -= eirq->interrupt_count;
@@ -252,8 +254,19 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
 static int acpi_irq_parse_one(acpi_handle handle, unsigned int index,
 			      struct irq_fwspec *fwspec, unsigned long *flags)
 {
-	struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec };
+	struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec, false };
 
+	/*
+	 * Firmware on arm64-based HPE m400 platform incorrectly marks
+	 * its UART interrupt as ACPI_PRODUCER rather than ACPI_CONSUMER.
+	 * Don't do the producer/consumer check for that device.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64)) {
+		struct acpi_device *adev = acpi_get_acpi_dev(handle);
+
+		if (adev && !strcmp(acpi_device_hid(adev), "APMC0D08"))
+			ctx.skip_producer_check = true;
+	}
 	acpi_walk_resources(handle, METHOD_NAME__CRS, acpi_irq_parse_one_cb, &ctx);
 	return ctx.rc;
 }
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 22ae7829a9155..1329032ed09b6 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1802,6 +1802,15 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 	if (!acpi_match_device_ids(device, ignore_serial_bus_ids))
 		return false;
 
+	/*
+	 * Firmware on some arm64 X-Gene platforms will make the UART
+	 * device appear as both a UART and a slave of that UART. Just
+	 * bail out here for X-Gene UARTs.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64) &&
+	    !strcmp(acpi_device_hid(device), "APMC0D08"))
+		return false;
+
 	INIT_LIST_HEAD(&resource_list);
 	acpi_dev_get_resources(device, &resource_list,
 			       acpi_check_serial_bus_slave,
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index fdfa7b2662180..f5f8ba457c93f 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -729,6 +729,24 @@ int ahci_stop_engine(struct ata_port *ap)
 	tmp &= ~PORT_CMD_START;
 	writel(tmp, port_mmio + PORT_CMD);
 
+#ifdef CONFIG_ARM64
+	/* Rev Ax of Cavium CN99XX needs a hack for port stop */
+	if (dev_is_pci(ap->host->dev) &&
+	    to_pci_dev(ap->host->dev)->vendor == 0x14e4 &&
+	    to_pci_dev(ap->host->dev)->device == 0x9027 &&
+	    midr_is_cpu_model_range(read_cpuid_id(),
+			MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN),
+			MIDR_CPU_VAR_REV(0, 0),
+			MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) {
+		tmp = readl(hpriv->mmio + 0x8000);
+		udelay(100);
+		writel(tmp | (1 << 26), hpriv->mmio + 0x8000);
+		udelay(100);
+		writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000);
+		dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n");
+	}
+#endif
+
 	/* wait for engine to stop. This could be as long as 500 msec */
 	tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
 				PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
diff --git a/drivers/char/ipmi/ipmi_dmi.c b/drivers/char/ipmi/ipmi_dmi.c
index bbf7029e224be..cf7faa970dd65 100644
--- a/drivers/char/ipmi/ipmi_dmi.c
+++ b/drivers/char/ipmi/ipmi_dmi.c
@@ -215,6 +215,21 @@ static int __init scan_for_dmi_ipmi(void)
 {
 	const struct dmi_device *dev = NULL;
 
+#ifdef CONFIG_ARM64
+	/* RHEL-only
+	 * If this is ARM-based HPE m400, return now, because that platform
+	 * reports the host-side ipmi address as intel port-io space, which
+	 * does not exist in the ARM architecture.
+	 */
+	const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+	if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+		pr_debug("%s does not support host ipmi\n", dmistr);
+		return 0;
+	}
+	/* END RHEL-only */
+#endif
+
 	while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev)))
 		dmi_decode_ipmi((const struct dmi_header *) dev->device_data);
 
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index e12b531f5c2f3..082707f8dff8c 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -35,6 +35,7 @@
 #include <linux/uuid.h>
 #include <linux/nospec.h>
 #include <linux/vmalloc.h>
+#include <linux/dmi.h>
 #include <linux/delay.h>
 
 #define IPMI_DRIVER_VERSION "39.2"
@@ -5510,8 +5511,21 @@ static int __init ipmi_init_msghandler_mod(void)
 {
 	int rv;
 
-	pr_info("version " IPMI_DRIVER_VERSION "\n");
+#ifdef CONFIG_ARM64
+	/* RHEL-only
+	 * If this is ARM-based HPE m400, return now, because that platform
+	 * reports the host-side ipmi address as intel port-io space, which
+	 * does not exist in the ARM architecture.
+	 */
+	const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);
 
+	if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+		pr_debug("%s does not support host ipmi\n", dmistr);
+		return -ENOSYS;
+	}
+	/* END RHEL-only */
+#endif
+	pr_info("version " IPMI_DRIVER_VERSION "\n");
 	mutex_lock(&ipmi_interfaces_mutex);
 	rv = ipmi_register_driver();
 	mutex_unlock(&ipmi_interfaces_mutex);
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index a2d0009560d0f..4f3486e6a84b2 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -25,6 +25,7 @@ subdir-$(CONFIG_EFI_STUB)		+= libstub
 obj-$(CONFIG_EFI_BOOTLOADER_CONTROL)	+= efibc.o
 obj-$(CONFIG_EFI_TEST)			+= test/
 obj-$(CONFIG_EFI_DEV_PATH_PARSER)	+= dev-path-parser.o
+obj-$(CONFIG_EFI)			+= secureboot.o
 obj-$(CONFIG_APPLE_PROPERTIES)		+= apple-properties.o
 obj-$(CONFIG_EFI_RCI2_TABLE)		+= rci2-table.o
 obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE)	+= embedded-firmware.o
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index fdf07dd6f4591..cfd2b58a34940 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -33,6 +33,7 @@
 #include <linux/memblock.h>
 #include <linux/security.h>
 #include <linux/notifier.h>
+#include <linux/bsearch.h>
 
 #include <asm/early_ioremap.h>
 
@@ -993,40 +994,101 @@ int efi_mem_type(unsigned long phys_addr)
 	return -EINVAL;
 }
 
+struct efi_error_code {
+	efi_status_t status;
+	int errno;
+	const char *description;
+};
+
+static const struct efi_error_code efi_error_codes[] = {
+	{ EFI_SUCCESS, 0, "Success"},
+#if 0
+	{ EFI_LOAD_ERROR, -EPICK_AN_ERRNO, "Load Error"},
+#endif
+	{ EFI_INVALID_PARAMETER, -EINVAL, "Invalid Parameter"},
+	{ EFI_UNSUPPORTED, -ENOSYS, "Unsupported"},
+	{ EFI_BAD_BUFFER_SIZE, -ENOSPC, "Bad Buffer Size"},
+	{ EFI_BUFFER_TOO_SMALL, -ENOSPC, "Buffer Too Small"},
+	{ EFI_NOT_READY, -EAGAIN, "Not Ready"},
+	{ EFI_DEVICE_ERROR, -EIO, "Device Error"},
+	{ EFI_WRITE_PROTECTED, -EROFS, "Write Protected"},
+	{ EFI_OUT_OF_RESOURCES, -ENOMEM, "Out of Resources"},
+#if 0
+	{ EFI_VOLUME_CORRUPTED, -EPICK_AN_ERRNO, "Volume Corrupt"},
+	{ EFI_VOLUME_FULL, -EPICK_AN_ERRNO, "Volume Full"},
+	{ EFI_NO_MEDIA, -EPICK_AN_ERRNO, "No Media"},
+	{ EFI_MEDIA_CHANGED, -EPICK_AN_ERRNO, "Media changed"},
+#endif
+	{ EFI_NOT_FOUND, -ENOENT, "Not Found"},
+#if 0
+	{ EFI_ACCESS_DENIED, -EPICK_AN_ERRNO, "Access Denied"},
+	{ EFI_NO_RESPONSE, -EPICK_AN_ERRNO, "No Response"},
+	{ EFI_NO_MAPPING, -EPICK_AN_ERRNO, "No mapping"},
+	{ EFI_TIMEOUT, -EPICK_AN_ERRNO, "Time out"},
+	{ EFI_NOT_STARTED, -EPICK_AN_ERRNO, "Not started"},
+	{ EFI_ALREADY_STARTED, -EPICK_AN_ERRNO, "Already started"},
+#endif
+	{ EFI_ABORTED, -EINTR, "Aborted"},
+#if 0
+	{ EFI_ICMP_ERROR, -EPICK_AN_ERRNO, "ICMP Error"},
+	{ EFI_TFTP_ERROR, -EPICK_AN_ERRNO, "TFTP Error"},
+	{ EFI_PROTOCOL_ERROR, -EPICK_AN_ERRNO, "Protocol Error"},
+	{ EFI_INCOMPATIBLE_VERSION, -EPICK_AN_ERRNO, "Incompatible Version"},
+#endif
+	{ EFI_SECURITY_VIOLATION, -EACCES, "Security Policy Violation"},
+#if 0
+	{ EFI_CRC_ERROR, -EPICK_AN_ERRNO, "CRC Error"},
+	{ EFI_END_OF_MEDIA, -EPICK_AN_ERRNO, "End of Media"},
+	{ EFI_END_OF_FILE, -EPICK_AN_ERRNO, "End of File"},
+	{ EFI_INVALID_LANGUAGE, -EPICK_AN_ERRNO, "Invalid Languages"},
+	{ EFI_COMPROMISED_DATA, -EPICK_AN_ERRNO, "Compromised Data"},
+
+	// warnings
+	{ EFI_WARN_UNKOWN_GLYPH, -EPICK_AN_ERRNO, "Warning Unknown Glyph"},
+	{ EFI_WARN_DELETE_FAILURE, -EPICK_AN_ERRNO, "Warning Delete Failure"},
+	{ EFI_WARN_WRITE_FAILURE, -EPICK_AN_ERRNO, "Warning Write Failure"},
+	{ EFI_WARN_BUFFER_TOO_SMALL, -EPICK_AN_ERRNO, "Warning Buffer Too Small"},
+#endif
+};
+
+static int
+efi_status_cmp_bsearch(const void *key, const void *item)
+{
+	u64 status = (u64)(uintptr_t)key;
+	struct efi_error_code *code = (struct efi_error_code *)item;
+
+	if (status < code->status)
+		return -1;
+	if (status > code->status)
+		return 1;
+	return 0;
+}
+
 int efi_status_to_err(efi_status_t status)
 {
-	int err;
-
-	switch (status) {
-	case EFI_SUCCESS:
-		err = 0;
-		break;
-	case EFI_INVALID_PARAMETER:
-		err = -EINVAL;
-		break;
-	case EFI_OUT_OF_RESOURCES:
-		err = -ENOSPC;
-		break;
-	case EFI_DEVICE_ERROR:
-		err = -EIO;
-		break;
-	case EFI_WRITE_PROTECTED:
-		err = -EROFS;
-		break;
-	case EFI_SECURITY_VIOLATION:
-		err = -EACCES;
-		break;
-	case EFI_NOT_FOUND:
-		err = -ENOENT;
-		break;
-	case EFI_ABORTED:
-		err = -EINTR;
-		break;
-	default:
-		err = -EINVAL;
-	}
+	struct efi_error_code *found;
+	size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);
 
-	return err;
+	found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+			sizeof(struct efi_error_code), num,
+			efi_status_cmp_bsearch);
+	if (!found)
+		return -EINVAL;
+	return found->errno;
+}
+
+const char *
+efi_status_to_str(efi_status_t status)
+{
+	struct efi_error_code *found;
+	size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);
+
+	found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+			sizeof(struct efi_error_code), num,
+			efi_status_cmp_bsearch);
+	if (!found)
+		return "Unknown error code";
+	return found->description;
 }
 EXPORT_SYMBOL_GPL(efi_status_to_err);
 
diff --git a/drivers/firmware/efi/secureboot.c b/drivers/firmware/efi/secureboot.c
new file mode 100644
index 0000000000000..de0a3714a5d44
--- /dev/null
+++ b/drivers/firmware/efi/secureboot.c
@@ -0,0 +1,38 @@
+/* Core kernel secure boot support.
+ *
+ * Copyright (C) 2017 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+
+/*
+ * Decide what to do when UEFI secure boot mode is enabled.
+ */
+void __init efi_set_secure_boot(enum efi_secureboot_mode mode)
+{
+	if (efi_enabled(EFI_BOOT)) {
+		switch (mode) {
+		case efi_secureboot_mode_disabled:
+			pr_info("Secure boot disabled\n");
+			break;
+		case efi_secureboot_mode_enabled:
+			set_bit(EFI_SECURE_BOOT, &efi.flags);
+			pr_info("Secure boot enabled\n");
+			break;
+		default:
+			pr_warn("Secure boot could not be determined (mode %u)\n",
+				   mode);
+			break;
+		}
+	}
+}
diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index e5e72aa5260a9..24654c7ecb04e 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -473,6 +473,7 @@ static int lenovo_input_mapping(struct hid_device *hdev,
 		return lenovo_input_mapping_tp10_ultrabook_kbd(hdev, hi, field,
 							       usage, bit, max);
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		return lenovo_input_mapping_x1_tab_kbd(hdev, hi, field, usage, bit, max);
 	default:
 		return 0;
@@ -583,6 +584,7 @@ static ssize_t attr_fn_lock_store(struct device *dev,
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		ret = lenovo_led_set_tp10ubkbd(hdev, TP10UBKBD_FN_LOCK_LED, value);
 		if (ret)
 			return ret;
@@ -776,6 +778,7 @@ static int lenovo_event(struct hid_device *hdev, struct hid_field *field,
 		return lenovo_event_cptkbd(hdev, field, usage, value);
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		return lenovo_event_tp10ubkbd(hdev, field, usage, value);
 	default:
 		return 0;
@@ -1056,6 +1059,7 @@ static int lenovo_led_brightness_set(struct led_classdev *led_cdev,
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		ret = lenovo_led_set_tp10ubkbd(hdev, tp10ubkbd_led[led_nr], value);
 		break;
 	}
@@ -1286,6 +1290,7 @@ static int lenovo_probe(struct hid_device *hdev,
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		ret = lenovo_probe_tp10ubkbd(hdev);
 		break;
 	default:
@@ -1372,6 +1377,7 @@ static void lenovo_remove(struct hid_device *hdev)
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		lenovo_remove_tp10ubkbd(hdev);
 		break;
 	}
@@ -1421,6 +1427,8 @@ static const struct hid_device_id lenovo_devices[] = {
 	 */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_TAB) },
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_TAB3) },
 	{ }
 };
 
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index d4af17fdba467..154f0403cbf4c 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -321,21 +321,12 @@ static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
 {
 	struct rmi_data *hdata = hid_get_drvdata(hdev);
 	struct rmi_device *rmi_dev = hdata->xport.rmi_dev;
-	unsigned long flags;
 
 	if (!(test_bit(RMI_STARTED, &hdata->flags)))
 		return 0;
 
-	pm_wakeup_event(hdev->dev.parent, 0);
-
-	local_irq_save(flags);
-
 	rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2);
 
-	generic_handle_irq(hdata->rmi_irq);
-
-	local_irq_restore(flags);
-
 	return 1;
 }
 
@@ -589,56 +580,6 @@ static const struct rmi_transport_ops hid_rmi_ops = {
 	.reset		= rmi_hid_reset,
 };
 
-static void rmi_irq_teardown(void *data)
-{
-	struct rmi_data *hdata = data;
-	struct irq_domain *domain = hdata->domain;
-
-	if (!domain)
-		return;
-
-	irq_dispose_mapping(irq_find_mapping(domain, 0));
-
-	irq_domain_remove(domain);
-	hdata->domain = NULL;
-	hdata->rmi_irq = 0;
-}
-
-static int rmi_irq_map(struct irq_domain *h, unsigned int virq,
-		       irq_hw_number_t hw_irq_num)
-{
-	irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops rmi_irq_ops = {
-	.map = rmi_irq_map,
-};
-
-static int rmi_setup_irq_domain(struct hid_device *hdev)
-{
-	struct rmi_data *hdata = hid_get_drvdata(hdev);
-	int ret;
-
-	hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1,
-						 &rmi_irq_ops, hdata);
-	if (!hdata->domain)
-		return -ENOMEM;
-
-	ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata);
-	if (ret)
-		return ret;
-
-	hdata->rmi_irq = irq_create_mapping(hdata->domain, 0);
-	if (hdata->rmi_irq <= 0) {
-		hid_err(hdev, "Can't allocate an IRQ\n");
-		return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO;
-	}
-
-	return 0;
-}
-
 static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	struct rmi_data *data = NULL;
@@ -711,18 +652,11 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	mutex_init(&data->page_mutex);
 
-	ret = rmi_setup_irq_domain(hdev);
-	if (ret) {
-		hid_err(hdev, "failed to allocate IRQ domain\n");
-		return ret;
-	}
-
 	if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
 		rmi_hid_pdata.gpio_data.disable = true;
 
 	data->xport.dev = hdev->dev.parent;
 	data->xport.pdata = rmi_hid_pdata;
-	data->xport.pdata.irq = data->rmi_irq;
 	data->xport.proto_name = "hid";
 	data->xport.ops = &hid_rmi_ops;
 
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index bf01f01964cf9..703896981e8ae 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/device.h>
+#include <linux/dmi.h>
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/fs.h>
@@ -2344,6 +2345,16 @@ static const struct amba_id etm4_ids[] = {
 	{},
 };
 
+static const struct dmi_system_id broken_coresight[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HPE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Apollo 70"),
+		},
+	},
+	{ }	/* terminating entry */
+};
+
 MODULE_DEVICE_TABLE(amba, etm4_ids);
 
 static struct amba_driver etm4x_amba_driver = {
@@ -2412,6 +2423,11 @@ static int __init etm4x_init(void)
 {
 	int ret;
 
+	if (dmi_check_system(broken_coresight)) {
+		pr_info("ETM4 disabled due to firmware bug\n");
+		return 0;
+	}
+
 	ret = etm4_pm_setup();
 
 	/* etm4_pm_setup() does its own cleanup - exit on error */
@@ -2438,6 +2454,9 @@ static int __init etm4x_init(void)
 
 static void __exit etm4x_exit(void)
 {
+	if (dmi_check_system(broken_coresight))
+		return;
+
 	amba_driver_unregister(&etm4x_amba_driver);
 	platform_driver_unregister(&etm4_platform_driver);
 	etm4_pm_clear();
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 2168b6cd71673..5d7cda175a0ce 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -182,34 +182,47 @@ void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
 	attn_data.data = fifo_data;
 
 	kfifo_put(&drvdata->attn_fifo, attn_data);
+
+	schedule_work(&drvdata->attn_work);
 }
 EXPORT_SYMBOL_GPL(rmi_set_attn_data);
 
-static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+static void attn_callback(struct work_struct *work)
 {
-	struct rmi_device *rmi_dev = dev_id;
-	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_driver_data *drvdata = container_of(work,
+							struct rmi_driver_data,
+							attn_work);
 	struct rmi4_attn_data attn_data = {0};
 	int ret, count;
 
 	count = kfifo_get(&drvdata->attn_fifo, &attn_data);
-	if (count) {
-		*(drvdata->irq_status) = attn_data.irq_status;
-		drvdata->attn_data = attn_data;
-	}
+	if (!count)
+		return;
 
-	ret = rmi_process_interrupt_requests(rmi_dev);
+	*(drvdata->irq_status) = attn_data.irq_status;
+	drvdata->attn_data = attn_data;
+
+	ret = rmi_process_interrupt_requests(drvdata->rmi_dev);
 	if (ret)
-		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+		rmi_dbg(RMI_DEBUG_CORE, &drvdata->rmi_dev->dev,
 			"Failed to process interrupt request: %d\n", ret);
 
-	if (count) {
-		kfree(attn_data.data);
-		drvdata->attn_data.data = NULL;
-	}
+	kfree(attn_data.data);
+	drvdata->attn_data.data = NULL;
 
 	if (!kfifo_is_empty(&drvdata->attn_fifo))
-		return rmi_irq_fn(irq, dev_id);
+		schedule_work(&drvdata->attn_work);
+}
+
+static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+{
+	struct rmi_device *rmi_dev = dev_id;
+	int ret;
+
+	ret = rmi_process_interrupt_requests(rmi_dev);
+	if (ret)
+		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+			"Failed to process interrupt request: %d\n", ret);
 
 	return IRQ_HANDLED;
 }
@@ -217,7 +230,6 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
 static int rmi_irq_init(struct rmi_device *rmi_dev)
 {
 	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
-	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 	int irq_flags = irq_get_trigger_type(pdata->irq);
 	int ret;
 
@@ -235,8 +247,6 @@ static int rmi_irq_init(struct rmi_device *rmi_dev)
 		return ret;
 	}
 
-	data->enabled = true;
-
 	return 0;
 }
 
@@ -886,23 +896,27 @@ void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
 	if (data->enabled)
 		goto out;
 
-	enable_irq(irq);
-	data->enabled = true;
-	if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
-		retval = disable_irq_wake(irq);
-		if (retval)
-			dev_warn(&rmi_dev->dev,
-				 "Failed to disable irq for wake: %d\n",
-				 retval);
-	}
+	if (irq) {
+		enable_irq(irq);
+		data->enabled = true;
+		if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+			retval = disable_irq_wake(irq);
+			if (retval)
+				dev_warn(&rmi_dev->dev,
+					 "Failed to disable irq for wake: %d\n",
+					 retval);
+		}
 
-	/*
-	 * Call rmi_process_interrupt_requests() after enabling irq,
-	 * otherwise we may lose interrupt on edge-triggered systems.
-	 */
-	irq_flags = irq_get_trigger_type(pdata->irq);
-	if (irq_flags & IRQ_TYPE_EDGE_BOTH)
-		rmi_process_interrupt_requests(rmi_dev);
+		/*
+		 * Call rmi_process_interrupt_requests() after enabling irq,
+		 * otherwise we may lose interrupt on edge-triggered systems.
+		 */
+		irq_flags = irq_get_trigger_type(pdata->irq);
+		if (irq_flags & IRQ_TYPE_EDGE_BOTH)
+			rmi_process_interrupt_requests(rmi_dev);
+	} else {
+		data->enabled = true;
+	}
 
 out:
 	mutex_unlock(&data->enabled_mutex);
@@ -922,20 +936,22 @@ void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
 		goto out;
 
 	data->enabled = false;
-	disable_irq(irq);
-	if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
-		retval = enable_irq_wake(irq);
-		if (retval)
-			dev_warn(&rmi_dev->dev,
-				 "Failed to enable irq for wake: %d\n",
-				 retval);
-	}
-
-	/* make sure the fifo is clean */
-	while (!kfifo_is_empty(&data->attn_fifo)) {
-		count = kfifo_get(&data->attn_fifo, &attn_data);
-		if (count)
-			kfree(attn_data.data);
+	if (irq) {
+		disable_irq(irq);
+		if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+			retval = enable_irq_wake(irq);
+			if (retval)
+				dev_warn(&rmi_dev->dev,
+					 "Failed to enable irq for wake: %d\n",
+					 retval);
+		}
+	} else {
+		/* make sure the fifo is clean */
+		while (!kfifo_is_empty(&data->attn_fifo)) {
+			count = kfifo_get(&data->attn_fifo, &attn_data);
+			if (count)
+				kfree(attn_data.data);
+		}
 	}
 
 out:
@@ -978,6 +994,8 @@ static int rmi_driver_remove(struct device *dev)
 
 	rmi_disable_irq(rmi_dev, false);
 
+	cancel_work_sync(&data->attn_work);
+
 	rmi_f34_remove_sysfs(rmi_dev);
 	rmi_free_function_list(rmi_dev);
 
@@ -1223,9 +1241,15 @@ static int rmi_driver_probe(struct device *dev)
 		}
 	}
 
-	retval = rmi_irq_init(rmi_dev);
-	if (retval < 0)
-		goto err_destroy_functions;
+	if (pdata->irq) {
+		retval = rmi_irq_init(rmi_dev);
+		if (retval < 0)
+			goto err_destroy_functions;
+	}
+
+	data->enabled = true;
+
+	INIT_WORK(&data->attn_work, attn_callback);
 
 	if (data->f01_container->dev.driver) {
 		/* Driver already bound, so enable ATTN now. */
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index ed6c5cb60c5ae..70cb770b78bb3 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -8,6 +8,7 @@
 
 #include <linux/amba/bus.h>
 #include <linux/device.h>
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/bits.h>
 #include <linux/bug.h>
@@ -2932,6 +2933,27 @@ int iommu_dev_disable_feature(struct device *dev, enum iommu_dev_features feat)
 }
 EXPORT_SYMBOL_GPL(iommu_dev_disable_feature);
 
+#ifdef CONFIG_ARM64
+static int __init iommu_quirks(void)
+{
+	const char *vendor, *name;
+
+	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	name = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+	if (vendor &&
+	    (strncmp(vendor, "GIGABYTE", 8) == 0 && name &&
+	     (strncmp(name, "R120", 4) == 0 ||
+	      strncmp(name, "R270", 4) == 0))) {
+		pr_warn("Gigabyte %s detected, force iommu passthrough mode", name);
+		iommu_def_domain_type = IOMMU_DOMAIN_IDENTITY;
+	}
+
+	return 0;
+}
+arch_initcall(iommu_quirks);
+#endif
+
 /**
  * iommu_setup_default_domain - Set the default_domain for the group
  * @group: Group to change
diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c
index 02afeb3acce46..5aef7fa378788 100644
--- a/drivers/net/wireless/realtek/rtw89/pci.c
+++ b/drivers/net/wireless/realtek/rtw89/pci.c
@@ -3026,24 +3026,54 @@ static void rtw89_pci_declaim_device(struct rtw89_dev *rtwdev,
 	pci_disable_device(pdev);
 }
 
-static void rtw89_pci_cfg_dac(struct rtw89_dev *rtwdev)
+static bool rtw89_pci_chip_is_manual_dac(struct rtw89_dev *rtwdev)
 {
-	struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
 	const struct rtw89_chip_info *chip = rtwdev->chip;
 
-	if (!rtwpci->enable_dac)
-		return;
-
 	switch (chip->chip_id) {
 	case RTL8852A:
 	case RTL8852B:
 	case RTL8851B:
 	case RTL8852BT:
-		break;
+		return true;
 	default:
-		return;
+		return false;
+	}
+}
+
+static bool rtw89_pci_is_dac_compatible_bridge(struct rtw89_dev *rtwdev)
+{
+	struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
+	struct pci_dev *bridge = pci_upstream_bridge(rtwpci->pdev);
+
+	if (!rtw89_pci_chip_is_manual_dac(rtwdev))
+		return true;
+
+	if (!bridge)
+		return false;
+
+	switch (bridge->vendor) {
+	case PCI_VENDOR_ID_INTEL:
+		return true;
+	case PCI_VENDOR_ID_ASMEDIA:
+		if (bridge->device == 0x2806)
+			return true;
+		break;
 	}
 
+	return false;
+}
+
+static void rtw89_pci_cfg_dac(struct rtw89_dev *rtwdev)
+{
+	struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
+
+	if (!rtwpci->enable_dac)
+		return;
+
+	if (!rtw89_pci_chip_is_manual_dac(rtwdev))
+		return;
+
 	rtw89_pci_config_byte_set(rtwdev, RTW89_PCIE_L1_CTRL, RTW89_PCIE_BIT_EN_64BITS);
 }
 
@@ -3061,6 +3091,9 @@ static int rtw89_pci_setup_mapping(struct rtw89_dev *rtwdev,
 		goto err;
 	}
 
+	if (!rtw89_pci_is_dac_compatible_bridge(rtwdev))
+		goto no_dac;
+
 	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
 	if (!ret) {
 		rtwpci->enable_dac = true;
@@ -3073,6 +3106,7 @@ static int rtw89_pci_setup_mapping(struct rtw89_dev *rtwdev,
 			goto err_release_regions;
 		}
 	}
+no_dac:
 
 	resource_len = pci_resource_len(pdev, bar_id);
 	rtwpci->mmap = pci_iomap(pdev, bar_id, resource_len);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index dccb60c1d9cc3..c7ec62f076c31 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4452,6 +4452,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
 				quirk_bridge_cavm_thrx2_pcie_root);
 
+/*
+ * PCI BAR 5 is not setup correctly for the on-board AHCI controller
+ * on Broadcom's Vulcan processor. Added a quirk to fix BAR 5 by
+ * using BAR 4's resources which are populated correctly and NOT
+ * actually used by the AHCI controller.
+ */
+static void quirk_fix_vulcan_ahci_bars(struct pci_dev *dev)
+{
+	struct resource *r =  &dev->resource[4];
+
+	if (!(r->flags & IORESOURCE_MEM) || (r->start == 0))
+		return;
+
+	/* Set BAR5 resource to BAR4 */
+	dev->resource[5] = *r;
+
+	/* Update BAR5 in pci config space */
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_5, r->start);
+
+	/* Clear BAR4's resource */
+	memset(r, 0, sizeof(*r));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9027, quirk_fix_vulcan_ahci_bars);
+
 /*
  * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
  * class code.  Fix it.
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 53896df7ec2bf..98e08f10f60ec 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -122,6 +122,14 @@ static const char *sd_cache_types[] = {
 	"write back, no read (daft)"
 };
 
+static const char *sd_probe_types[] = { "async", "sync" };
+
+static char sd_probe_type[6] = "async";
+module_param_string(probe, sd_probe_type, sizeof(sd_probe_type),
+		    S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(probe, "async or sync. Setting to 'sync' disables asynchronous "
+		 "device number assignments (sda, sdb, ...).");
+
 static void sd_set_flush_flag(struct scsi_disk *sdkp,
 		struct queue_limits *lim)
 {
@@ -4349,6 +4357,8 @@ static int __init init_sd(void)
 		goto err_out_class;
 	}
 
+	if (!strcmp(sd_probe_type, "sync"))
+		sd_template.gendrv.probe_type = PROBE_FORCE_SYNCHRONOUS;
 	err = scsi_register_driver(&sd_template.gendrv);
 	if (err)
 		goto err_out_driver;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4b93c0bd1d4bc..b98906237306d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5844,6 +5844,13 @@ static void hub_event(struct work_struct *work)
 			(u16) hub->change_bits[0],
 			(u16) hub->event_bits[0]);
 
+	/* Don't disconnect USB-SATA on TrimSlice */
+	if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
+		if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
+				(hub->event_bits[0] == 0x2))
+			hub->event_bits[0] = 0;
+	}
+
 	/* Lock the device, then check to see if we were
 	 * disconnected while waiting for the lock to succeed. */
 	usb_lock_device(hdev);
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index b164da5e129e8..72bfb79b491da 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -134,6 +134,8 @@
 #define CRYPTO_TFM_REQ_MAY_SLEEP	0x00000200
 #define CRYPTO_TFM_REQ_MAY_BACKLOG	0x00000400
 
+#define CRYPTO_TFM_FIPS_COMPLIANCE	0x80000000
+
 /*
  * Miscellaneous stuff.
  */
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 6bf3c4fe85117..67e5400f76444 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -45,6 +45,8 @@ struct screen_info;
 #define EFI_ABORTED		(21 | (1UL << (BITS_PER_LONG-1)))
 #define EFI_SECURITY_VIOLATION	(26 | (1UL << (BITS_PER_LONG-1)))
 
+#define EFI_IS_ERROR(x)		((x) & (1UL << (BITS_PER_LONG-1)))
+
 typedef unsigned long efi_status_t;
 typedef u8 efi_bool_t;
 typedef u16 efi_char16_t;		/* UNICODE character */
@@ -877,6 +879,14 @@ static inline int efi_range_is_wc(unsigned long start, unsigned long len)
 #define EFI_MEM_ATTR		10	/* Did firmware publish an EFI_MEMORY_ATTRIBUTES table? */
 #define EFI_MEM_NO_SOFT_RESERVE	11	/* Is the kernel configured to ignore soft reservations? */
 #define EFI_PRESERVE_BS_REGIONS	12	/* Are EFI boot-services memory segments available? */
+#define EFI_SECURE_BOOT		13	/* Are we in Secure Boot mode? */
+
+enum efi_secureboot_mode {
+	efi_secureboot_mode_unset,
+	efi_secureboot_mode_unknown,
+	efi_secureboot_mode_disabled,
+	efi_secureboot_mode_enabled,
+};
 
 #ifdef CONFIG_EFI
 /*
@@ -888,6 +898,8 @@ static inline bool efi_enabled(int feature)
 }
 extern void efi_reboot(enum reboot_mode reboot_mode, const char *__unused);
 
+extern void __init efi_set_secure_boot(enum efi_secureboot_mode mode);
+
 bool __pure __efi_soft_reserve_enabled(void);
 
 static inline bool __pure efi_soft_reserve_enabled(void)
@@ -909,6 +921,8 @@ static inline bool efi_enabled(int feature)
 static inline void
 efi_reboot(enum reboot_mode reboot_mode, const char *__unused) {}
 
+static inline void efi_set_secure_boot(enum efi_secureboot_mode mode) {}
+
 static inline bool efi_soft_reserve_enabled(void)
 {
 	return false;
@@ -923,6 +937,7 @@ static inline void efi_find_mirror(void) {}
 #endif
 
 extern int efi_status_to_err(efi_status_t status);
+extern const char *efi_status_to_str(efi_status_t status);
 
 /*
  * Variable Attributes
@@ -1138,13 +1153,6 @@ static inline bool efi_runtime_disabled(void) { return true; }
 extern void efi_call_virt_check_flags(unsigned long flags, const void *caller);
 extern unsigned long efi_call_virt_save_flags(void);
 
-enum efi_secureboot_mode {
-	efi_secureboot_mode_unset,
-	efi_secureboot_mode_unknown,
-	efi_secureboot_mode_disabled,
-	efi_secureboot_mode_enabled,
-};
-
 static inline
 enum efi_secureboot_mode efi_get_secureboot_mode(efi_get_variable_t *get_var)
 {
diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h
index 19c333fafe113..db33ee7f55d54 100644
--- a/include/linux/lsm_hook_defs.h
+++ b/include/linux/lsm_hook_defs.h
@@ -439,6 +439,8 @@ LSM_HOOK(int, 0, bpf_token_capable, const struct bpf_token *token, int cap)
 #endif /* CONFIG_BPF_SYSCALL */
 
 LSM_HOOK(int, 0, locked_down, enum lockdown_reason what)
+LSM_HOOK(int, 0, lock_kernel_down, const char *where, enum lockdown_reason level)
+
 
 #ifdef CONFIG_PERF_EVENTS
 LSM_HOOK(int, 0, perf_event_open, struct perf_event_attr *attr, int type)
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index ab7eea01ab427..fff7c5f737fc8 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -364,6 +364,7 @@ struct rmi_driver_data {
 
 	struct rmi4_attn_data attn_data;
 	DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
+	struct work_struct attn_work;
 };
 
 int rmi_register_transport_device(struct rmi_transport_dev *xport);
diff --git a/include/linux/security.h b/include/linux/security.h
index 1390f1efb4f07..b9a8ccb1dbdcc 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -507,6 +507,7 @@ int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
 int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
 int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
 int security_locked_down(enum lockdown_reason what);
+int security_lock_kernel_down(const char *where, enum lockdown_reason level);
 int lsm_fill_user_ctx(struct lsm_ctx __user *uctx, u32 *uctx_len,
 		      void *val, size_t val_len, u64 id, u64 flags);
 #else /* CONFIG_SECURITY */
@@ -1477,6 +1478,10 @@ static inline int security_locked_down(enum lockdown_reason what)
 {
 	return 0;
 }
+static inline int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+	return 0;
+}
 static inline int lsm_fill_user_ctx(struct lsm_ctx __user *uctx,
 				    u32 *uctx_len, void *val, size_t val_len,
 				    u64 id, u64 flags)
diff --git a/kernel/module/signing.c b/kernel/module/signing.c
index a2ff4242e623d..f0d2be1ee4f1c 100644
--- a/kernel/module/signing.c
+++ b/kernel/module/signing.c
@@ -61,10 +61,17 @@ int mod_verify_sig(const void *mod, struct load_info *info)
 	modlen -= sig_len + sizeof(ms);
 	info->len = modlen;
 
-	return verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+	ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
 				      VERIFY_USE_SECONDARY_KEYRING,
 				      VERIFYING_MODULE_SIGNATURE,
 				      NULL, NULL);
+	if (ret == -ENOKEY && IS_ENABLED(CONFIG_INTEGRITY_PLATFORM_KEYRING)) {
+		ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+				VERIFY_USE_PLATFORM_KEYRING,
+				VERIFYING_MODULE_SIGNATURE,
+				NULL, NULL);
+	}
+	return ret;
 }
 
 int module_sig_check(struct load_info *info, int flags)
diff --git a/scripts/sign-file.c b/scripts/sign-file.c
index 3edb156ae52c3..0114ae1dbf7ff 100644
--- a/scripts/sign-file.c
+++ b/scripts/sign-file.c
@@ -27,7 +27,6 @@
 #include <openssl/evp.h>
 #include <openssl/pem.h>
 #include <openssl/err.h>
-#include <openssl/engine.h>
 
 /*
  * OpenSSL 3.0 deprecates the OpenSSL's ENGINE API.
@@ -99,16 +98,6 @@ static void display_openssl_errors(int l)
 	}
 }
 
-static void drain_openssl_errors(void)
-{
-	const char *file;
-	int line;
-
-	if (ERR_peek_error() == 0)
-		return;
-	while (ERR_get_error_line(&file, &line)) {}
-}
-
 #define ERR(cond, fmt, ...)				\
 	do {						\
 		bool __cond = (cond);			\
@@ -144,22 +133,8 @@ static EVP_PKEY *read_private_key(const char *private_key_name)
 	EVP_PKEY *private_key;
 
 	if (!strncmp(private_key_name, "pkcs11:", 7)) {
-		ENGINE *e;
-
-		ENGINE_load_builtin_engines();
-		drain_openssl_errors();
-		e = ENGINE_by_id("pkcs11");
-		ERR(!e, "Load PKCS#11 ENGINE");
-		if (ENGINE_init(e))
-			drain_openssl_errors();
-		else
-			ERR(1, "ENGINE_init");
-		if (key_pass)
-			ERR(!ENGINE_ctrl_cmd_string(e, "PIN", key_pass, 0),
-			    "Set PKCS#11 PIN");
-		private_key = ENGINE_load_private_key(e, private_key_name,
-						      NULL, NULL);
-		ERR(!private_key, "%s", private_key_name);
+		fprintf(stderr, "Error: pkcs11 not implemented\n");
+		exit(1);
 	} else {
 		BIO *b;
 
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 191e0461d6d5b..e6f418b3e948b 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -16,6 +16,8 @@ fi
 ignore="$(echo "$RCS_FIND_IGNORE" | sed 's|\\||g' )"
 # tags and cscope files should also ignore MODVERSION *.mod.c files
 ignore="$ignore ( -name *.mod.c ) -prune -o"
+# RHEL tags and cscope should also ignore redhat/rpm
+ignore="$ignore ( -path redhat/rpm ) -prune -o"
 
 # ignore arbitrary directories
 if [ -n "${IGNORE_DIRS}" ]; then
diff --git a/security/integrity/platform_certs/load_uefi.c b/security/integrity/platform_certs/load_uefi.c
index d1fdd113450a6..182e8090cfe85 100644
--- a/security/integrity/platform_certs/load_uefi.c
+++ b/security/integrity/platform_certs/load_uefi.c
@@ -74,7 +74,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
 		return NULL;
 
 	if (*status != EFI_BUFFER_TOO_SMALL) {
-		pr_err("Couldn't get size: 0x%lx\n", *status);
+		pr_err("Couldn't get size: %s (0x%lx)\n",
+		       efi_status_to_str(*status), *status);
 		return NULL;
 	}
 
@@ -85,7 +86,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
 	*status = efi.get_variable(name, guid, NULL, &lsize, db);
 	if (*status != EFI_SUCCESS) {
 		kfree(db);
-		pr_err("Error reading db var: 0x%lx\n", *status);
+		pr_err("Error reading db var: %s (0x%lx)\n",
+		       efi_status_to_str(*status), *status);
 		return NULL;
 	}
 
diff --git a/security/lockdown/Kconfig b/security/lockdown/Kconfig
index e84ddf4840101..d0501353a4b95 100644
--- a/security/lockdown/Kconfig
+++ b/security/lockdown/Kconfig
@@ -16,6 +16,19 @@ config SECURITY_LOCKDOWN_LSM_EARLY
 	  subsystem is fully initialised. If enabled, lockdown will
 	  unconditionally be called before any other LSMs.
 
+config LOCK_DOWN_IN_EFI_SECURE_BOOT
+	bool "Lock down the kernel in EFI Secure Boot mode"
+	default n
+	depends on EFI && SECURITY_LOCKDOWN_LSM_EARLY
+	help
+	  UEFI Secure Boot provides a mechanism for ensuring that the firmware
+	  will only load signed bootloaders and kernels.  Secure boot mode may
+	  be determined from EFI variables provided by the system firmware if
+	  not indicated by the boot parameters.
+
+	  Enabling this option results in kernel lockdown being triggered if
+	  EFI Secure Boot is set.
+
 choice
 	prompt "Kernel default lockdown mode"
 	default LOCK_DOWN_KERNEL_FORCE_NONE
diff --git a/security/lockdown/lockdown.c b/security/lockdown/lockdown.c
index cd84d8ea1dfbf..e4c70a0312bc8 100644
--- a/security/lockdown/lockdown.c
+++ b/security/lockdown/lockdown.c
@@ -74,6 +74,7 @@ static int lockdown_is_locked_down(enum lockdown_reason what)
 
 static struct security_hook_list lockdown_hooks[] __ro_after_init = {
 	LSM_HOOK_INIT(locked_down, lockdown_is_locked_down),
+	LSM_HOOK_INIT(lock_kernel_down, lock_kernel_down),
 };
 
 const struct lsm_id lockdown_lsmid = {
diff --git a/security/security.c b/security/security.c
index 43166e341526c..b8cf110aeb589 100644
--- a/security/security.c
+++ b/security/security.c
@@ -5630,6 +5630,18 @@ int security_locked_down(enum lockdown_reason what)
 }
 EXPORT_SYMBOL(security_locked_down);
 
+/**
+ * security_lock_kernel_down() - Put the kernel into lock-down mode.
+ *
+ * @where: Where the lock-down is originating from (e.g. command line option)
+ * @level: The lock-down level (can only increase)
+ */
+int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+	return call_int_hook(lock_kernel_down, where, level);
+}
+EXPORT_SYMBOL(security_lock_kernel_down);
+
 #ifdef CONFIG_PERF_EVENTS
 /**
  * security_perf_event_open() - Check if a perf event open is allowed