rpms/kernel
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5d080632e5
kernel/kernel.spec

3249 lines
109 KiB
RPMSpec
Raw Normal View History

initial srpm import
2010-07-29 23:46:31 +00:00
# We have to override the new %%install behavior because, well... the kernel is special.
%global __spec_install_pre %{___build_pre}
Summary: The Linux kernel
# For a stable, released kernel, released_kernel should be 1. For rawhide
# and/or a kernel built from an rc or git snapshot, released_kernel should
# be 0.
Linux v4.2-2744-g65a99597f044 - Reenable debugging options.
2015-09-01 16:25:34 +00:00
%global released_kernel 0
initial srpm import
2010-07-29 23:46:31 +00:00
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
# Sign modules on x86. Make sure the config files match this setting if more
# architectures are added.
%ifarch %{ix86} x86_64
%global signmodules 1
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
%global zipmodules 1
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%else
%global signmodules 0
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
%global zipmodules 0
%endif
%if %{zipmodules}
%global zipsed -e 's/\.ko$/\.ko.xz/'
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%endif
Revert upstream commit 1c220c69ce to fix i686 booting (rhbz 1247382)
2015-08-03 12:52:01 +00:00
# define buildid .local
initial srpm import
2010-07-29 23:46:31 +00:00
First crack at adaptation to dist-git.
2010-07-30 01:35:15 +00:00
# baserelease defines which build revision of this kernel version we're
# building. We used to call this fedora_build, but the magical name
# baserelease is matched by the rpmdev-bumpspec tool, which you should use.
initial srpm import
2010-07-29 23:46:31 +00:00
#
First crack at adaptation to dist-git.
2010-07-30 01:35:15 +00:00
# We used to have some extra magic weirdness to bump this automatically,
# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog'
# When changing base_sublevel below or going from rc to a final kernel,
# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).
# scripts/rebase.sh should be made to do that for you, actually.
#
Add sanity check for baserelease
2011-11-07 13:46:25 +00:00
# NOTE: baserelease must be > 0 or bad things will happen if you switch
# to a released kernel (released version will be < rc version)
Linux 2.6.36-rc1-git1
2010-08-18 23:44:48 +00:00
#
Add sanity check for baserelease
2011-11-07 13:46:25 +00:00
# For non-released -rc kernels, this will be appended after the rcX and
# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3"
#
Linux v4.3-rc1-19-gd25ed277fbd4
2015-09-15 13:19:14 +00:00
%global baserelease 1
First crack at adaptation to dist-git.
2010-07-30 01:35:15 +00:00
%global fedora_build %{baserelease}
initial srpm import
2010-07-29 23:46:31 +00:00
# base_sublevel is the kernel version we're starting with and patching
Linux 3.3-rc7
2012-03-12 16:54:01 +00:00
# on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base,
# which yields a base_sublevel of 0.
Linux v4.2 Also add a check for a created git dir. We don't handle the released_kernel case otherwise. I'll have to go back and fix this later.
2015-08-31 15:28:03 +00:00
%define base_sublevel 2
initial srpm import
2010-07-29 23:46:31 +00:00
## If this is a released kernel ##
%if 0%{?released_kernel}
# Do we have a -stable update to apply?
Linux v3.19-rc2 - Temporarily disable aarch64patches - Happy New Year
2015-01-05 21:09:49 +00:00
%define stable_update 0
initial srpm import
2010-07-29 23:46:31 +00:00
# Set rpm version accordingly
%if 0%{?stable_update}
Linux-3.1-rc1 Adjust Makefile munging for 3.x numbering scheme
2011-08-08 14:17:46 +00:00
%define stablerev %{stable_update}
initial srpm import
2010-07-29 23:46:31 +00:00
%define stable_base %{stable_update}
%endif
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define rpmversion 4.%{base_sublevel}.%{stable_update}
initial srpm import
2010-07-29 23:46:31 +00:00
## The not-released-kernel case ##
%else
# The next upstream release sublevel (base_sublevel+1)
Linux v4.0
2015-04-13 09:37:18 +00:00
%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
initial srpm import
2010-07-29 23:46:31 +00:00
# The rc snapshot level
Linux v4.3-rc2 Disable debugging options.
2015-09-21 17:36:49 +00:00
%define rcrev 2
initial srpm import
2010-07-29 23:46:31 +00:00
# The git snapshot level
Linux v4.3-rc2-19-gbcee19f - Reenable debugging options.
2015-09-22 16:48:03 +00:00
%define gitrev 1
initial srpm import
2010-07-29 23:46:31 +00:00
# Set rpm version accordingly
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define rpmversion 4.%{upstream_sublevel}.0
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.
# What parts do we want to build? We must build at least one kernel.
# These are the kernels that are built IF the architecture allows it.
# All should default to 1 (enabled) and be flipped to 0 (disabled)
# by later arch-specific checks.
# The following build options are enabled by default.
# Use either --without <opt> in your rpmbuild command or force values
# to 0 in here to disable them.
#
# standard kernel
%define with_up %{?_without_up: 0} %{?!_without_up: 1}
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
# kernel PAE (only valid for i686 (PAE) and ARM (lpae))
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
initial srpm import
2010-07-29 23:46:31 +00:00
# kernel-debug
%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
# kernel-headers
%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
# perf
%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
# tools
%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
initial srpm import
2010-07-29 23:46:31 +00:00
# kernel-debuginfo
re-enable debuginfo generation, which had been accidentally disabled in 3d121413
2011-06-22 16:17:08 +00:00
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
initial srpm import
2010-07-29 23:46:31 +00:00
# kernel-bootwrapper (for creating zImages from kernel + initrd)
%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}
# Want to build a the vsdo directories installed
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
#
initial srpm import
2010-07-29 23:46:31 +00:00
# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
# Only build the pae kernel (--with paeonly):
%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
initial srpm import
2010-07-29 23:46:31 +00:00
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
#
initial srpm import
2010-07-29 23:46:31 +00:00
# should we do C=1 builds with sparse
whitespace cleanup
2010-10-26 17:51:00 +00:00
%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
Add build option "--with=release" to build a non-debug kernel in rawhide.
2011-10-27 15:47:50 +00:00
#
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
# Cross compile requested?
%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
#
Add build option "--with=release" to build a non-debug kernel in rawhide.
2011-10-27 15:47:50 +00:00
# build a release kernel on rawhide
%define with_release %{?_with_release: 1} %{?!_with_release: 0}
initial srpm import
2010-07-29 23:46:31 +00:00
# Set debugbuildsenabled to 1 for production (build separate debug kernels)
# and 0 for rawhide (all kernels are debug kernels).
# See also 'make debug' and 'make release'.
Linux v4.3-rc2-19-gbcee19f - Reenable debugging options.
2015-09-22 16:48:03 +00:00
%define debugbuildsenabled 0
initial srpm import
2010-07-29 23:46:31 +00:00
# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
# pkg_release is what we'll fill in for the rpm Release: field
%if 0%{?released_kernel}
Use the same naming scheme as rawhide for -stable RC kernels (e.g. 3.1.1-0.rc1.1 instead of 3.1.1-1.rc1)
2011-11-12 00:51:31 +00:00
%define pkg_release %{fedora_build}%{?buildid}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
%else
# non-released_kernel
%if 0%{?rcrev}
%define rctag .rc%rcrev
%else
%define rctag .rc0
%endif
%if 0%{?gitrev}
%define gittag .git%gitrev
%else
%define gittag .git0
%endif
move %fedora_build in the non-released case
2010-11-18 18:52:09 +00:00
%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# The kernel tarball/base version
Linux v4.0
2015-04-13 09:37:18 +00:00
%define kversion 4.%{base_sublevel}
initial srpm import
2010-07-29 23:46:31 +00:00
%define make_target bzImage
Cleanup image_install_path definitions All arches define this to /boot, so just use one definition. Also remove redundant mkdir for the debuginfo /boot path. Issues reported by Jarod Wilson
2015-05-12 13:55:29 +00:00
%define image_install_path boot
initial srpm import
2010-07-29 23:46:31 +00:00
%define KVERREL %{version}-%{release}.%{_target_cpu}
%define hdrarch %_target_cpu
%define asmarch %_target_cpu
%if 0%{!?nopatches:1}
%define nopatches 0
%endif
%if %{with_vanilla}
%define nopatches 1
%endif
%if %{nopatches}
%define with_bootwrapper 0
%define variant -vanilla
%endif
%if !%{debugbuildsenabled}
%define with_debug 0
%endif
%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
# kernel PAE is only built on i686 and ARMv7.
%ifnarch i686 armv7hl
initial srpm import
2010-07-29 23:46:31 +00:00
%define with_pae 0
%endif
# if requested, only build base kernel
%if %{with_baseonly}
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
%define with_pae 0
%define with_debug 0
%endif
# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
initial srpm import
2010-07-29 23:46:31 +00:00
%define with_debug 0
%endif
# if requested, only build debug kernel
%if %{with_dbgonly}
%if %{debugbuildsenabled}
%define with_up 0
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
%define with_pae 0
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%define with_pae 0
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
%define with_tools 0
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%define with_perf 0
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%define all_x86 i386 i686
%if %{with_vdso_install}
# These arches install vdso/ directories.
Remove ppc32 support The powerpc secondary arch team has disabled all ppc32 builds in koji for F21 and beyond: https://lists.fedoraproject.org/pipermail/ppc/2014-May/002801.html FESCo also recently said that dropped or new architectures must essentially prove they have an active and viable effort behind them before being considered for Secondary Arch support. This effort has not materialized in the interim since the current powerpc team dropped ppc32. There's little point in keeping support for ppc32 support in the kernel package when it will never be built. This also removes the -smp variant and with_smp* support, as that was only used on ppc32.
2014-09-08 18:43:02 +00:00
%define vdso_arches %{all_x86} x86_64 %{power64} s390 s390x aarch64
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# Overrides for generic default options
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif
# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_headers 0
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
%define with_tools 0
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%define with_perf 0
initial srpm import
2010-07-29 23:46:31 +00:00
%define all_arch_configs kernel-%{version}-*.config
%endif
# bootwrapper is only on ppc
Build tools on ppc64le (rhbz 1138884), Some minor ppc64 cleanups
2014-09-08 18:31:10 +00:00
# sparse blows up on ppc
Remove ppc32 support The powerpc secondary arch team has disabled all ppc32 builds in koji for F21 and beyond: https://lists.fedoraproject.org/pipermail/ppc/2014-May/002801.html FESCo also recently said that dropped or new architectures must essentially prove they have an active and viable effort behind them before being considered for Secondary Arch support. This effort has not materialized in the interim since the current powerpc team dropped ppc32. There's little point in keeping support for ppc32 support in the kernel package when it will never be built. This also removes the -smp variant and with_smp* support, as that was only used on ppc32.
2014-09-08 18:43:02 +00:00
%ifnarch %{power64}
initial srpm import
2010-07-29 23:46:31 +00:00
%define with_bootwrapper 0
%define with_sparse 0
%endif
# Per-arch tweaks
%ifarch %{all_x86}
%define asmarch x86
%define hdrarch i386
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%define pae PAE
initial srpm import
2010-07-29 23:46:31 +00:00
%define all_arch_configs kernel-%{version}-i?86*.config
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define kernel_image arch/x86/boot/bzImage
%endif
Build tools on ppc64le (rhbz 1138884), Some minor ppc64 cleanups
2014-09-08 18:31:10 +00:00
%ifarch %{power64}
initial srpm import
2010-07-29 23:46:31 +00:00
%define asmarch powerpc
%define hdrarch powerpc
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
Build tools on ppc64le (rhbz 1138884), Some minor ppc64 cleanups
2014-09-08 18:31:10 +00:00
%ifarch ppc64 ppc64p7
%define all_arch_configs kernel-%{version}-ppc64*.config
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Add ppc64le support from Brent Baude (rhbz 1073102)
2014-03-06 19:35:35 +00:00
%ifarch ppc64le
Reorganisation and cleanup of the powerpc configs
2015-06-26 21:23:54 +00:00
%define all_arch_configs kernel-%{version}-ppc64le*.config
Build tools on ppc64le (rhbz 1138884), Some minor ppc64 cleanups
2014-09-08 18:31:10 +00:00
%endif
Add ppc64le support from Brent Baude (rhbz 1073102)
2014-03-06 19:35:35 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
%define make_target image
%define kernel_image arch/s390/boot/image
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
%define with_tools 0
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
From: David Marlin <dmarlin@redhat.com> Modify to split the ARM config files to work more like other archs. Rename: config-arm -> config-arm-generic Add: config-arm-omap-generic
2011-08-16 14:31:26 +00:00
%define asmarch arm
initial srpm import
2010-07-29 23:46:31 +00:00
%define hdrarch arm
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%define pae lpae
setup config for tegra based arm boards, add device tree patches for arm build tegra and omap kernel on arm
2011-08-16 16:33:15 +00:00
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
Shift some %ifarch arm stuff around Define kernel_mflags so we can use the same BuildTarget command for both arm and everyone else. Move the dtb install after modules.
2013-06-12 18:57:55 +00:00
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
%define kernel_mflags KALLSYMS_EXTRA_PASS=1
Build perf/tools on ARM sfp/hfp not just sfp
2012-01-26 11:00:37 +00:00
# we only build headers/perf/tools on the base arm arches
only build kernel headers on the base arm arches
2011-08-10 19:50:02 +00:00
# just like we used to only build them on i386 for x86
- Make tegra inherit armv7-generic, fix and re-enable tegra - Enable SPI on ARM - Drop config-arm-generic - ARM config updates
2013-03-31 23:45:08 +00:00
%ifnarch armv7hl
only build kernel headers on the base arm arches
2011-08-10 19:50:02 +00:00
%define with_headers 0
Build perf/tools on ARM sfp/hfp not just sfp
2012-01-26 11:00:37 +00:00
%define with_perf 0
%define with_tools 0
only build kernel headers on the base arm arches
2011-08-10 19:50:02 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Add initial arm64 support Based on a working config by Paul Whalen. The generated config ends up being the same, so hopefully this marks the first ARMv8 Fedora kernel. Signed-off-by: Kyle McMartin <kyle@redhat.com>
2013-06-16 12:31:18 +00:00
%ifarch aarch64
aarch64: i lied, fix it better
2014-02-04 15:21:13 +00:00
%define all_arch_configs kernel-%{version}-aarch64*.config
Add initial arm64 support Based on a working config by Paul Whalen. The generated config ends up being the same, so hopefully this marks the first ARMv8 Fedora kernel. Signed-off-by: Kyle McMartin <kyle@redhat.com>
2013-06-16 12:31:18 +00:00
%define asmarch arm64
%define hdrarch arm64
%define make_target Image.gz
%define kernel_image arch/arm64/boot/Image.gz
%endif
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
# Should make listnewconfig fail if there's config options
# printed out?
Drop upstream_branch related spec stuffs We haven't set using_upstream_branch to 1 since we started using git. Almost 7 years is a long time to carry something around we aren't using. Drop the upstream_branch stuff.
2014-01-13 19:50:04 +00:00
%if %{nopatches}
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
%define listnewconfig_fail 0
%else
%define listnewconfig_fail 1
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# To temporarily exclude an architecture from being built, add it to
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
initial srpm import
2010-07-29 23:46:31 +00:00
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).
# We only build kernel-headers on the following...
Kill sparc, it's dead
2013-01-07 16:50:09 +00:00
%define nobuildarches i386 s390
initial srpm import
2010-07-29 23:46:31 +00:00
%ifarch %nobuildarches
%define with_up 0
%define with_pae 0
%define with_debuginfo 0
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%define with_perf 0
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
%define with_tools 0
initial srpm import
2010-07-29 23:46:31 +00:00
%define _enable_debug_packages 0
%endif
%define with_pae_debug 0
%if %{with_pae}
%define with_pae_debug %{with_debug}
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# Architectures we build tools/cpupower on
Remove ppc32 support The powerpc secondary arch team has disabled all ppc32 builds in koji for F21 and beyond: https://lists.fedoraproject.org/pipermail/ppc/2014-May/002801.html FESCo also recently said that dropped or new architectures must essentially prove they have an active and viable effort behind them before being considered for Secondary Arch support. This effort has not materialized in the interim since the current powerpc team dropped ppc32. There's little point in keeping support for ppc32 support in the kernel package when it will never be built. This also removes the -smp variant and with_smp* support, as that was only used on ppc32.
2014-09-08 18:43:02 +00:00
%define cpupowerarchs %{ix86} x86_64 %{power64} %{arm} aarch64
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
#
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# Packages that need to be installed before the kernel is, because the %%post
initial srpm import
2010-07-29 23:46:31 +00:00
# scripts use them.
#
update conflicts/requires and drop initscripts, patch from Kay.
2013-07-19 00:08:47 +00:00
%define kernel_prereq fileutils, systemd >= 203-2
Add patch from Harald Hoyer to migrate to using kernel-install
2013-05-15 17:08:08 +00:00
%define initrd_prereq dracut >= 027
initial srpm import
2010-07-29 23:46:31 +00:00
Name: kernel%{?variant}
Group: System Environment/Kernel
Fix license tag. (rhbz 450492)
2012-09-14 16:04:56 +00:00
License: GPLv2 and Redistributable, no modification permitted
initial srpm import
2010-07-29 23:46:31 +00:00
URL: http://www.kernel.org/
Version: %{rpmversion}
Linux v3.16-rc4-20-g448bfad8a185 - Reenable debugging options.
2014-07-08 13:52:05 +00:00
Release: %{pkg_release}
initial srpm import
2010-07-29 23:46:31 +00:00
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
Remove ppc32 support The powerpc secondary arch team has disabled all ppc32 builds in koji for F21 and beyond: https://lists.fedoraproject.org/pipermail/ppc/2014-May/002801.html FESCo also recently said that dropped or new architectures must essentially prove they have an active and viable effort behind them before being considered for Secondary Arch support. This effort has not materialized in the interim since the current powerpc team dropped ppc32. There's little point in keeping support for ppc32 support in the kernel package when it will never be built. This also removes the -smp variant and with_smp* support, as that was only used on ppc32.
2014-09-08 18:43:02 +00:00
ExclusiveArch: %{all_x86} x86_64 ppc64 ppc64p7 s390 s390x %{arm} aarch64 ppc64le
initial srpm import
2010-07-29 23:46:31 +00:00
ExclusiveOS: Linux
kernel metapackage shouldn't depend on subpackages we don't build On %{nobuildarches} we don't build the real kernel and modules, so don't set a Requires for them. The positive effect is that we can eliminate an explicit kernel Provides from the fake-build-provides package in secondary kojis.
2014-05-19 14:17:32 +00:00
%ifnarch %{nobuildarches}
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Requires: kernel-core-uname-r = %{KVERREL}%{?variant}
Requires: kernel-modules-uname-r = %{KVERREL}%{?variant}
kernel metapackage shouldn't depend on subpackages we don't build On %{nobuildarches} we don't build the real kernel and modules, so don't set a Requires for them. The positive effect is that we can eliminate an explicit kernel Provides from the fake-build-provides package in secondary kojis.
2014-05-19 14:17:32 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
These haven't been shipped in sometime, we can just remove it. This also has the effect of silencing the rpmlint warning about an unversioned obsolete.
2010-10-26 17:46:03 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
#
# List the packages used during the kernel build
#
Use git to apply patches
2015-07-09 19:46:07 +00:00
BuildRequires: kmod, patch, bash, sh-utils, tar, git
update BuildRequires
2013-10-23 15:39:31 +00:00
BuildRequires: bzip2, xz, findutils, gzip, m4, perl, perl-Carp, make, diffutils, gawk
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc
Put a BuildRequires on bc Randomly changing what we need to build the kernel is awesome. Let's keep doing that.
2013-02-27 21:18:58 +00:00
BuildRequires: net-tools, hostname, bc
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_sparse}
update BuildRequires
2013-10-23 15:39:31 +00:00
BuildRequires: sparse
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_perf}
Add BuildRequires on xz-devel perf needs this to be able to deal with xz compressed modules apparently. It helpfully warns about it missing but doesn't fail the build. Given we install modules xz compressed, it's probably a good idea.
2015-08-26 16:43:15 +00:00
BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) bison flex xz-devel
Add various patches to fix perf build on non-x86 arches
2012-11-19 19:17:23 +00:00
BuildRequires: audit-libs-devel
Exclude arm from numactl-devel BR for per It doesn't exist on 32-bit ARM either.
2014-10-24 15:33:53 +00:00
%ifnarch s390 s390x %{arm}
kernel.spec: enable building of perf with libnuma support Patch makes perf package dependent on numactl-devel and so enables numa subsystem benchmarks for perf bench command. Can be easily reproduced by calling 'perf bench numa mem -a': - current output: 'Unknown subsystem:numa' - built with this patch: 'Running numa/mem benchmark...' [Edited to apply for all architectures except s390/s390x by Josh Boyer] Signed-off-by: Petr Holasek <pholasek@redhat.com>
2014-10-23 16:51:50 +00:00
BuildRequires: numactl-devel
%endif
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%endif
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
%if %{with_tools}
Linux v3.12-8333-g4fbf888 - Build tmon in kernel-tools - Disable ARM NEON optimised AES and OMAP2PLUS cpufreq because they don't build
2013-11-14 16:23:15 +00:00
BuildRequires: pciutils-devel gettext ncurses-devel
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
update BuildRequires
2013-10-23 15:39:31 +00:00
BuildRequires: rpm-build, elfutils
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
%define debuginfo_args --strict-build-id -r
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%if %{signmodules}
Make sure to BR both openssl and openssl-devel
2015-09-09 16:26:32 +00:00
BuildRequires: openssl openssl-devel
Bump requirement on pesign to grab the version that works on i686 too
2012-08-16 12:02:59 +00:00
BuildRequires: pesign >= 0.10-4
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%endif
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%if %{with_cross}
BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
%endif
Linux v4.0
2015-04-13 09:37:18 +00:00
Source0: ftp://ftp.kernel.org/pub/linux/kernel/v4.x/linux-%{kversion}.tar.xz
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v3.13 - Disable debugging options. - Use versioned perf man pages tarball
2014-01-20 15:36:55 +00:00
Source10: perf-man-%{kversion}.tar.gz
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
Source11: x509.genkey
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
Source15: merge.pl
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
Source16: mod-extra.list
Move the modules-extra processing to a script
2012-09-14 16:25:07 +00:00
Source17: mod-extra.sh
sign all modules with the extras signing script
2013-01-25 18:53:02 +00:00
Source18: mod-sign.sh
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Source90: filter-x86_64.sh
Source91: filter-armv7hl.sh
Source92: filter-i686.sh
Source93: filter-aarch64.sh
Source95: filter-ppc64.sh
Source96: filter-ppc64le.sh
Source97: filter-s390x.sh
Add filter-ppc64p7.sh because ppc64p7 is an entirely separate RPM arch
2014-06-03 18:47:58 +00:00
Source98: filter-ppc64p7.sh
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Source99: filter-modules.sh
sign all modules with the extras signing script
2013-01-25 18:53:02 +00:00
%define modsign_cmd %{SOURCE18}
initial srpm import
2010-07-29 23:46:31 +00:00
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
Source19: Makefile.release
initial srpm import
2010-07-29 23:46:31 +00:00
Source20: Makefile.config
Source21: config-debug
Source22: config-nodebug
Source23: config-generic
add config-no-extra to SourceNN
2013-10-03 16:33:52 +00:00
Source24: config-no-extra
initial srpm import
2010-07-29 23:46:31 +00:00
Source30: config-x86-generic
Source31: config-i686-PAE
Make sure all the config-* files are in some Sources line
2011-08-10 13:18:01 +00:00
Source32: config-x86-32-generic
initial srpm import
2010-07-29 23:46:31 +00:00
Source40: config-x86_64-generic
Reorganisation and cleanup of the powerpc configs
2015-06-26 21:23:54 +00:00
Source50: config-powerpc64-generic
initial srpm import
2010-07-29 23:46:31 +00:00
Source53: config-powerpc64
Add support for ppc64p7 subarch
2012-08-09 00:25:31 +00:00
Source54: config-powerpc64p7
Add ppc64le support from Brent Baude (rhbz 1073102)
2014-03-06 19:35:35 +00:00
Source55: config-powerpc64le
initial srpm import
2010-07-29 23:46:31 +00:00
Source70: config-s390x
Add initial arm64 support Based on a working config by Paul Whalen. The generated config ends up being the same, so hopefully this marks the first ARMv8 Fedora kernel. Signed-off-by: Kyle McMartin <kyle@redhat.com>
2013-06-16 12:31:18 +00:00
Source100: config-arm-generic
The initial ARM unified kernel support (vexpress, highbank, mvebu to begin). WOO HOO
2012-10-26 14:38:35 +00:00
# Unified ARM kernels
Add initial arm64 support Based on a working config by Paul Whalen. The generated config ends up being the same, so hopefully this marks the first ARMv8 Fedora kernel. Signed-off-by: Kyle McMartin <kyle@redhat.com>
2013-06-16 12:31:18 +00:00
Source101: config-armv7-generic
Source102: config-armv7
Source103: config-armv7-lpae
Source110: config-arm64
initial srpm import
2010-07-29 23:46:31 +00:00
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
# This file is intentionally left empty in the stock kernel. Its a nicety
# added for those wanting to do custom rebuilds with altered config opts.
Source1000: config-local
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# Sources for kernel-tools
Source2000: cpupower.service
Source2001: cpupower.config
initial srpm import
2010-07-29 23:46:31 +00:00
# Here should be only the patches up to the upstream canonical Linus tree.
# For a stable release kernel
%if 0%{?stable_update}
%if 0%{?stable_base}
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define stable_patch_00 patch-4.%{base_sublevel}.%{stable_base}.xz
Use git to apply patches
2015-07-09 19:46:07 +00:00
Source5000: %{stable_patch_00}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# non-released_kernel case
# These are automagically defined by the rcrev and gitrev values set up
# near the top of this spec file.
%else
%if 0%{?rcrev}
Use git to apply patches
2015-07-09 19:46:07 +00:00
Source5000: patch-4.%{upstream_sublevel}-rc%{rcrev}.xz
initial srpm import
2010-07-29 23:46:31 +00:00
%if 0%{?gitrev}
Use git to apply patches
2015-07-09 19:46:07 +00:00
Source5001: patch-4.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Use git to apply patches
2015-07-09 19:46:07 +00:00
Source5000: patch-4.%{base_sublevel}-git%{gitrev}.xz
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
%endif
# build tweak for build ID magic, even for -vanilla
Use git to apply patches
2015-07-09 19:46:07 +00:00
Source5005: kbuild-AFTER_LINK.patch
initial srpm import
2010-07-29 23:46:31 +00:00
%if !%{nopatches}
# Git trees.
# Standalone patches
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
Patch451: lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch
Patch452: amd-xgbe-a0-Add-support-for-XGBE-on-A0.patch
Patch453: amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch
Patch454: arm64-avoid-needing-console-to-enable-serial-console.patch
Patch455: usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch
Patch456: arm64-acpi-drop-expert-patch.patch
Patch457: ARM-tegra-usb-no-reset.patch
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch463: arm-i.MX6-Utilite-device-dtb.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch466: input-kill-stupid-messages.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch467: die-floppy-die.patch
Update modsign and include secure boot - Update modsign patch to latest upstream - Add initial UEFI Secure Boot patchset. Work in progress.
2012-07-24 15:22:32 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch468: no-pcspkr-modalias.patch
Patch file cleanup Do a couple things here: - Split the mega-patches into individual patches. Should help with rebasing. - Make all patches 'git am' acceptable. There should be no functional or actual code differences from before
2014-08-20 17:22:24 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch470: silence-fbcon-logo.patch
handle-efi-roms.patch: Improve PCI support on UEFI systems
2012-09-04 15:31:54 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch471: Kbuild-Add-an-option-to-enable-GCC-VTA.patch
Add ESRT patch here. Signed-off-by: Peter Jones <pjones@redhat.com>
2015-03-13 12:09:29 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch472: crash-driver.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch473: Add-secure_modules-call.patch
Linux v3.9-8933-gce85722 - First DRM merge
2013-05-03 12:27:34 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch474: PCI-Lock-down-BAR-access-when-module-security-is-ena.patch
Linux 2.6.37-rc4-git3
2010-12-03 12:26:49 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch475: x86-Lock-down-IO-port-access-when-module-security-is.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch476: ACPI-Limit-access-to-custom_method.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch477: asus-wmi-Restrict-debugfs-interface-when-module-load.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch478: Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch479: acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch
improve handling of null rate in LIS3LV02Dx accelerometer driver. (rhbz 785814)
2012-02-17 21:03:23 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch480: kexec-Disable-at-runtime-if-the-kernel-enforces-modu.patch
Disable soft lockup detector on virtual machines. (rhbz 971139)
2013-06-11 20:36:11 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch481: x86-Restrict-MSR-access-when-module-loading-is-restr.patch
Linux v3.17-8307-gf1d0d14120a8
2014-10-14 13:36:10 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch482: Add-option-to-automatically-enforce-module-signature.patch
Add initial arm64 support Based on a working config by Paul Whalen. The generated config ends up being the same, so hopefully this marks the first ARMv8 Fedora kernel. Signed-off-by: Kyle McMartin <kyle@redhat.com>
2013-06-16 12:31:18 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch483: efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch
Patch file cleanup Do a couple things here: - Split the mega-patches into individual patches. Should help with rebasing. - Make all patches 'git am' acceptable. There should be no functional or actual code differences from before
2014-08-20 17:22:24 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch484: efi-Make-EFI_SECURE_BOOT_SIG_ENFORCE-depend-on-EFI.patch
Add patch to fix versatile build failure
2013-01-21 09:04:21 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch485: efi-Add-EFI_SECURE_BOOT-bit.patch
Add patch to fix versatile build failure
2013-01-21 09:04:21 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch486: hibernate-Disable-in-a-signed-modules-environment.patch
Patch to prevent NULL pointer dereference in sd_revalidate_disk (rhbz 754518)
2012-02-10 19:56:13 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch487: Add-EFI-signature-data-types.patch
Linux v3.8-rc5-218-ga56e160 - Enable NAMESPACES and CHECKPOINT_RESTORE on x86_64 for F19 CRIU feature - Enable CONFIG_DEBUG_ATOMIC_SLEEP
2013-01-30 15:55:31 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch488: Add-an-EFI-signature-blob-parser-and-key-loader.patch
Add patch to fix ath9k dma stop checks (rhbz 892811)
2013-02-06 14:57:47 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch489: KEYS-Add-a-system-blacklist-keyring.patch
CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397) Part deux: Fix it harder
2015-04-01 12:38:46 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch490: MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch
Linux v4.0-7300-g4fc8adcfec3d - Patch from Benjamin Tissoires to fix 3 finger tap on synaptics (rhbz 1212230) - Add patch to support touchpad on Google Pixel 2 (rhbz 1209088)
2015-04-17 13:31:16 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch491: MODSIGN-Support-not-importing-certs-from-db.patch
Fix up boot times for live images (rhbz 1210857)
2015-04-28 18:00:58 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch492: Add-sysrq-option-to-disable-secure-boot-mode.patch
Fix DVB oops (rhbz 1220118)
2015-05-18 17:15:55 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch493: drm-i915-hush-check-crtc-state.patch
Fix incorrect bandwidth on some Chicony webcams - Fix DVB oops (rhbz 1220118)
2015-05-18 17:17:08 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch494: disable-i8042-check-on-apple-mac.patch
Add quirk for Mac Pro backlight (rhbz 1217249)
2015-05-28 17:37:50 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch495: lis3-improve-handling-of-null-rate.patch
Fix middle button issues on external Lenovo keyboards (rhbz 1225563)
2015-06-02 13:13:59 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch496: watchdog-Disable-watchdog-on-virtual-machines.patch
Drop firwmare warning until we get a real fix (rhbz 1133378)
2015-06-03 21:37:16 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch497: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
Add patch to turn of WC mmaps on i915 from airlied (rhbz 1226743)
2015-06-04 11:14:37 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch498: criu-no-expert.patch
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch499: ath9k-rx-dma-stop-check.patch
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch500: xen-pciback-Don-t-disable-PCI_COMMAND-on-PCI-device-.patch
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch501: Input-synaptics-pin-3-touches-when-the-firmware-repo.patch
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch502: firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
Patch503: drm-i915-turn-off-wc-mmaps.patch
CVE-2015-XXXX kvm: NULL ptr deref in kvm_apic_has_events (rhbz 1230770 1230774)
2015-06-12 14:15:55 +00:00
kexec/uefi: copy secure boot flag in boot params across kexec reboot Kexec reboot in case secure boot enabled does not keep the secure boot mode in new kernel, so later one can load unsigned kernel via legacy kexec_load. Adding a patch to fix this by retain the secure_boot flag in original kernel. Signed-off-by: Dave Young <dyoung@redhat.com>
2015-08-07 07:41:45 +00:00
Patch508: kexec-uefi-copy-secure_boot-flag-in-boot-params.patch
Patch from Hans de Goede to add yoga 3 rfkill quirk (rhbz 1239050)
2015-08-16 00:54:25 +00:00
#rhbz 1239050
Patch509: ideapad-laptop-Add-Lenovo-Yoga-3-14-to-no_hw_rfkill-.patch
Fix ARM build Silly single charater mistake. Patch sent upstream.
2015-09-02 20:18:33 +00:00
Patch520: ARM-dts-Fix-Makefile-target-for-sun4i-a10-itead-itea.patch
Linux v4.2-4282-gae982073095a
2015-09-02 15:26:43 +00:00
CVE-2015-1333 add_key memory leak (rhbz 1244171)
2015-07-27 14:44:28 +00:00
Patch904: kdbus.patch
Add patch to fix touchpad issues on Razer machines (rhbz 1227891)
2015-06-18 23:00:58 +00:00
Fix oops in 32-bit kernel on 64-bit AMD cpus (rhbz 1263762)
2015-09-18 12:22:04 +00:00
#rhbz 1263762
Patch526: 0001-x86-cpu-cacheinfo-Fix-teardown-path.patch
Add "# END OF PATCH DEFINITIONS" tag (rhbz 811777)
2012-04-17 15:12:10 +00:00
# END OF PATCH DEFINITIONS
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root
%description
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
The kernel meta package
#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
# %%kernel_reqprovconf <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf \
Provides: kernel = %{rpmversion}-%{pkg_release}\
Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\
Provides: kernel-drm-nouveau = 16\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
Bump Requiers on linux-firmware for new amdgpu firmware requirements
2015-09-04 12:43:10 +00:00
Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Requires(preun): systemd >= 200\
Fix xorg-x11-drv-vmmouse Conflicts version number
2015-05-18 14:08:10 +00:00
Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
Enable autoprov for kernel packages This allows RPM to generate Provides:kmod(foo.ko) statements for every module shipped in the package. That in turn allows packages to put requires on specific modules and not worry about which package they are located in.
2014-05-09 12:33:05 +00:00
AutoReq: no\
AutoProv: yes\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{nil}
initial srpm import
2010-07-29 23:46:31 +00:00
%package headers
Summary: Header files for the Linux kernel for use by glibc
Group: Development/System
Fix another rpmlint obsoletes warning kernel.src:757: W: unversioned-explicit-obsoletes glibc-kernheaders kernel-headers.x86_64: W: self-obsoletion glibc-kernheaders obsoletes glibc-kernheaders = 3.0-46
2010-10-26 17:47:32 +00:00
Obsoletes: glibc-kernheaders < 3.0-46
initial srpm import
2010-07-29 23:46:31 +00:00
Provides: glibc-kernheaders = 3.0-46
The if conditional needs quotes here, apparently Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 16:03:40 +00:00
%if "0%{?variant}"
Add k-var-headers Obsoletes/Provides When doing a variant build, you want kernel-variant-headers to Obsoletes: and Provides: kernel-headers, so that it can upgrade/replace kernel-headers. Otherwise, attempting to install kernel-variant-headers leads to rpm spewing file conflicts with kernel-headers, if installed. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 15:54:24 +00:00
Obsoletes: kernel-headers < %{rpmversion}-%{pkg_release}
Provides: kernel-headers = %{rpmversion}-%{pkg_release}
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.
%package bootwrapper
Summary: Boot wrapper files for generating combined kernel + initrd images
Group: Development/System
bootwrapper needs objcopy. Add it to requires: (wwoods)
2011-07-22 18:32:48 +00:00
Requires: gzip binutils
initial srpm import
2010-07-29 23:46:31 +00:00
%description bootwrapper
Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"
files combining both kernel and initial ramdisk.
%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Group: Development/Debug
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_perf}
%package -n perf
Summary: Performance monitoring for the Linux kernel
Group: Development/System
License: GPLv2
%description -n perf
This package contains the perf tool, which enables performance monitoring
of the Linux kernel.
%package -n perf-debuginfo
Summary: Debug information for package perf
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n perf-debuginfo
This package provides debug information for the perf package.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/traceevent/plugins/.*|XXX' -o perf-debuginfo.list}
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%package -n python-perf
Summary: Python bindings for apps which will manipulate perf events
Group: Development/Libraries
%description -n python-perf
The python-perf package contains a module that permits applications
written in the Python programming language to use the interface
to manipulate perf events.
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
%{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")}
Add python-perf-debuginfo package (rhbz 752140)
2011-11-08 19:44:50 +00:00
%package -n python-perf-debuginfo
Summary: Debug information for package perf python bindings
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n python-perf-debuginfo
This package provides debug information for the perf python bindings.
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
# the python_sitearch macro should already be defined from above
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{python_sitearch}/perf.so(\.debug)?|XXX' -o python-perf-debuginfo.list}
Add python-perf-debuginfo package (rhbz 752140)
2011-11-08 19:44:50 +00:00
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%endif # with_perf
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
%if %{with_tools}
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%package -n kernel-tools
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
Summary: Assortment of tools for the Linux kernel
initial srpm import
2010-07-29 23:46:31 +00:00
Group: Development/System
License: GPLv2
Adjust obsoletes/provides to replace the cpupowerutils package
2011-08-18 15:44:24 +00:00
Provides: cpupowerutils = 1:009-0.6.p1
Obsoletes: cpupowerutils < 1:009-0.6.p1
Provides: cpufreq-utils = 1:009-0.6.p1
Provides: cpufrequtils = 1:009-0.6.p1
Obsoletes: cpufreq-utils < 1:009-0.6.p1
Obsoletes: cpufrequtils < 1:009-0.6.p1
Obsoletes: cpuspeed < 1:1.5-16
Split out kernel-tools-libs (rhbz 859943)
2012-09-28 12:31:01 +00:00
Requires: kernel-tools-libs = %{version}-%{release}
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%description -n kernel-tools
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
This package contains the tools/ directory from the kernel source
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
and the supporting documentation.
Split out perf-debuginfo subpackage.
2011-03-04 23:40:12 +00:00
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%package -n kernel-tools-libs
Split out kernel-tools-libs (rhbz 859943)
2012-09-28 12:31:01 +00:00
Summary: Libraries for the kernels-tools
Group: Development/System
License: GPLv2
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%description -n kernel-tools-libs
Split out kernel-tools-libs (rhbz 859943)
2012-09-28 12:31:01 +00:00
This package contains the libraries built from the tools/ directory
from the kernel source.
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%package -n kernel-tools-libs-devel
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
Summary: Assortment of tools for the Linux kernel
Group: Development/System
License: GPLv2
Adjust obsoletes/provides to replace the cpupowerutils package
2011-08-18 15:44:24 +00:00
Requires: kernel-tools = %{version}-%{release}
3.1-rc2-git7 snapshot. Fix provides/obsoletes for cpupowerutils-devel
2011-08-20 12:13:48 +00:00
Provides: cpupowerutils-devel = 1:009-0.6.p1
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
Split out kernel-tools-libs (rhbz 859943)
2012-09-28 12:31:01 +00:00
Requires: kernel-tools-libs = %{version}-%{release}
Make sure kernel-tools-libs-devel provides kernel-tools-devel
2012-10-03 12:23:43 +00:00
Provides: kernel-tools-devel
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%description -n kernel-tools-libs-devel
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
This package contains the development files for the tools/ directory from
the kernel source.
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%package -n kernel-tools-debuginfo
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
Summary: Debug information for package kernel-tools
Split out perf-debuginfo subpackage.
2011-03-04 23:40:12 +00:00
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
%description -n kernel-tools-debuginfo
Prepare for packaging more of tools/ by renaming 'perf' subpackage to kernel-tools
2011-08-16 19:20:09 +00:00
This package provides debug information for package kernel-tools.
Split out perf-debuginfo subpackage.
2011-03-04 23:40:12 +00:00
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
Build a python-perf sub-package.
2011-10-31 20:01:28 +00:00
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%endif # with_tools
initial srpm import
2010-07-29 23:46:31 +00:00
#
# This macro creates a kernel-<subpackage>-debuginfo package.
# %%kernel_debuginfo_package <subpackage>
#
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Group: Development/Debug\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
AutoReqProv: no\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}debuginfo\
initial srpm import
2010-07-29 23:46:31 +00:00
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:[+]%{1}}/.*|/.*%%{KVERREL}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
#
# This macro creates a kernel-<subpackage>-devel package.
# %%kernel_devel_package <subpackage> <pretty-name>
#
%define kernel_devel_package() \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel-devel = %{version}-%{release}%{?1:+%{1}}\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Add installonlypkg(kernel) to kernel-devel subpackages (rhbz 1079906)
2015-01-13 19:36:20 +00:00
Provides: installonlypkg(kernel)\
initial srpm import
2010-07-29 23:46:31 +00:00
AutoReqProv: no\
Requires(pre): /usr/bin/find\
Requires: perl\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}devel\
initial srpm import
2010-07-29 23:46:31 +00:00
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
# This macro creates a kernel-<subpackage>-modules-extra package.
Linux v3.11-rc1 - Disable debugging options. - Fix %kernel_modules warning.
2013-07-17 02:56:52 +00:00
# %%kernel_modules_extra_package <subpackage> <pretty-name>
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
Linux v3.11-rc1 - Disable debugging options. - Fix %kernel_modules warning.
2013-07-17 02:56:52 +00:00
%define kernel_modules_extra_package() \
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
%package %{?1:%{1}-}modules-extra\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
Fix k-m-e Provides to be explicit to only the package flavor (rhbz 1046246)
2014-01-14 17:00:46 +00:00
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
Add virtual provides for kernel-module to kernel-modules-extra (rhbz 770444)
2012-06-11 20:15:28 +00:00
Provides: installonlypkg(kernel-module)\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Enable autoprov for kernel packages This allows RPM to generate Provides:kmod(foo.ko) statements for every module shipped in the package. That in turn allows packages to put requires on specific modules and not worry about which package they are located in.
2014-05-09 12:33:05 +00:00
AutoReq: no\
AutoProv: yes\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}modules-extra\
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
%{nil}
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# This macro creates a kernel-<subpackage>-modules package.
# %%kernel_modules_package <subpackage> <pretty-name>
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%define kernel_modules_package() \
%package %{?1:%{1}-}modules\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Summary: kernel modules to match the %{?2:%{2}-}core kernel\
Group: System Environment/Kernel\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Provides: installonlypkg(kernel-module)\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Enable autoprov for kernel packages This allows RPM to generate Provides:kmod(foo.ko) statements for every module shipped in the package. That in turn allows packages to put requires on specific modules and not worry about which package they are located in.
2014-05-09 12:33:05 +00:00
AutoReq: no\
AutoProv: yes\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}modules\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
#
# this macro creates a kernel-<subpackage> meta package.
# %%kernel_meta_package <subpackage>
#
%define kernel_meta_package() \
%package %{1}\
summary: kernel meta-package for the %{1} kernel\
group: system environment/kernel\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\
Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
%description %{1}\
The meta-package for the %{1} kernel\
%{nil}
initial srpm import
2010-07-29 23:46:31 +00:00
#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
# %%define variant_summary The Linux kernel compiled for <configuration>
# %%kernel_variant_package [-n <pretty-name>] <subpackage>
#
%define kernel_variant_package(n:) \
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%package %{?1:%{1}-}core\
initial srpm import
2010-07-29 23:46:31 +00:00
Summary: %{variant_summary}\
Group: System Environment/Kernel\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%kernel_reqprovconf}\
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
%if %{?1:1} %{!?1:0} \
%{expand:%%kernel_meta_package %{?1:%{1}}}\
%endif\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
# Now, each variant package.
Fix thinko in last commit kernel-PAE will be "used" (but not populated) for all but armv7hl. On !i686 and !arm, it still needs to exist for some of the other macros to expand properly.
2013-06-12 17:39:46 +00:00
%ifnarch armv7hl
initial srpm import
2010-07-29 23:46:31 +00:00
%define variant_summary The Linux kernel compiled for PAE capable machines
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%kernel_variant_package %{pae}
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%description %{pae}-core
initial srpm import
2010-07-29 23:46:31 +00:00
This package includes a version of the Linux kernel with support for up to
64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
The non-PAE kernel can only address up to 4GB of memory.
Install the kernel-PAE package if your machine has more than 4GB of memory.
Fix thinko in last commit kernel-PAE will be "used" (but not populated) for all but armv7hl. On !i686 and !arm, it still needs to exist for some of the other macros to expand properly.
2013-06-12 17:39:46 +00:00
%else
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%define variant_summary The Linux kernel compiled for Cortex-A15
%kernel_variant_package %{pae}
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%description %{pae}-core
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
This package includes a version of the Linux kernel with support for
Cortex-A15 devices with LPAE and HW virtualisation support
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%kernel_variant_package %{pae}debug
initial srpm import
2010-07-29 23:46:31 +00:00
Obsoletes: kernel-PAE-debug
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%description %{pae}debug-core
initial srpm import
2010-07-29 23:46:31 +00:00
This package includes a version of the Linux kernel with support for up to
64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
The non-PAE kernel can only address up to 4GB of memory.
Install the kernel-PAE package if your machine has more than 4GB of memory.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
%define variant_summary The Linux kernel compiled with extra debugging enabled
%kernel_variant_package debug
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%description debug-core
initial srpm import
2010-07-29 23:46:31 +00:00
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# And finally the main -core package
%define variant_summary The Linux kernel
%kernel_variant_package
%description core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
setup config for tegra based arm boards, add device tree patches for arm build tegra and omap kernel on arm
2011-08-16 16:33:15 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}%{with_pae}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif
Fix the baserelease sanity check We need to explicitly check for 0, so that we can do things like setting baserelease to 1.1 for scratch builds, etc.
2011-11-22 15:36:27 +00:00
%if "%{baserelease}" == "0"
Add sanity check for baserelease
2011-11-07 13:46:25 +00:00
echo "baserelease must be greater than zero"
exit 1
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
for patch in %{patches} ; do
if [ ! -f $patch ] ; then
echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
exit 1
fi
done
fi 2>/dev/null
patch_command='patch -p1 -F1 -s'
ApplyPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
stop using the obsolete forms of grep shortcuts.
2010-10-26 17:49:21 +00:00
if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then
Linux v4.0-rc1-22-gb24e2bdde4af - Reenable debugging options. Fixup one more 3.x place and make sure we don't apply the -rcX patch in yet another spot.
2015-02-24 22:49:34 +00:00
if [ "${patch:0:8}" != "patch-4." ] ; then
initial srpm import
2010-07-29 23:46:31 +00:00
echo "ERROR: Patch $patch not listed as a source patch in specfile"
exit 1
fi
fi 2>/dev/null
case "$patch" in
*.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
Add support for .xz compressed patches
2011-11-07 13:16:50 +00:00
*.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
initial srpm import
2010-07-29 23:46:31 +00:00
*) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
esac
}
# don't apply patch if it's empty
ApplyOptionalPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
if [ "$C" -gt 9 ]; then
ApplyPatch $patch ${1+"$@"}
fi
}
# First we unpack the kernel tarball.
# If this isn't the first make prep, we use links to the existing clean tarball
# which speeds things up quite a bit.
# Update to latest upstream.
%if 0%{?released_kernel}
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define vanillaversion 4.%{base_sublevel}
initial srpm import
2010-07-29 23:46:31 +00:00
# non-released_kernel case
%else
%if 0%{?rcrev}
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define vanillaversion 4.%{upstream_sublevel}-rc%{rcrev}
initial srpm import
2010-07-29 23:46:31 +00:00
%if 0%{?gitrev}
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define vanillaversion 4.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define vanillaversion 4.%{base_sublevel}-git%{gitrev}
initial srpm import
2010-07-29 23:46:31 +00:00
%else
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
%define vanillaversion 4.%{base_sublevel}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
%endif
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3
# %%{kversion} : the base version, e.g. 2.6.34
initial srpm import
2010-07-29 23:46:31 +00:00
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# Use kernel-%%{kversion}%%{?dist} as the top-level directory name
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# so we can prep different trees within a single git directory.
initial srpm import
2010-07-29 23:46:31 +00:00
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Build a list of the other top-level kernel tree directories.
# This will be used to hardlink identical vanilla subdirs.
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-4.*' \
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
| grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||:
initial srpm import
2010-07-29 23:46:31 +00:00
do the old directory cleanup before we unpack the new tree. This removes all the old clutter of previous nvr trees.
2012-03-19 21:52:11 +00:00
# Delete all old stale trees.
if [ -d kernel-%{kversion}%{?dist} ]; then
cd kernel-%{kversion}%{?dist}
for i in linux-*
do
Linux v3.3-4074-g5375871
2012-03-22 16:05:20 +00:00
if [ -d $i ]; then
# Just in case we ctrl-c'd a prep already
rm -rf deleteme.%{_target_cpu}
# Move away the stale away, and delete in background.
mv $i deleteme-$i
rm -rf deleteme* &
fi
do the old directory cleanup before we unpack the new tree. This removes all the old clutter of previous nvr trees.
2012-03-19 21:52:11 +00:00
done
cd ..
fi
# Generate new tree
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then
if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then
# The base vanilla version already exists.
cd kernel-%{kversion}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
# Any vanilla-* directories other than the base one are stale.
for dir in vanilla-*; do
[ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
done
else
rm -f pax_global_header
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Look for an identical base vanilla dir that can be hardlinked.
initial srpm import
2010-07-29 23:46:31 +00:00
for sharedir in $sharedirs ; do
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
initial srpm import
2010-07-29 23:46:31 +00:00
break
fi
done
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
%setup -q -n kernel-%{kversion}%{?dist} -c -T
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al $sharedir/vanilla-%{kversion} .
initial srpm import
2010-07-29 23:46:31 +00:00
else
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
%setup -q -n kernel-%{kversion}%{?dist} -c
One s/kversion/KVERREL too many Fix prep as the tarball untars to linux-%{kversion}
2012-02-23 00:18:51 +00:00
mv linux-%{kversion} vanilla-%{kversion}
initial srpm import
2010-07-29 23:46:31 +00:00
fi
fi
%if "%{kversion}" != "%{vanillaversion}"
for sharedir in $sharedirs ; do
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
initial srpm import
2010-07-29 23:46:31 +00:00
break
fi
done
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
initial srpm import
2010-07-29 23:46:31 +00:00
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al $sharedir/vanilla-%{vanillaversion} .
initial srpm import
2010-07-29 23:46:31 +00:00
else
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Need to apply patches to the base vanilla version.
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al vanilla-%{kversion} vanilla-%{vanillaversion}
initial srpm import
2010-07-29 23:46:31 +00:00
cd vanilla-%{vanillaversion}
# Update vanilla to the latest upstream.
# (non-released_kernel case only)
%if 0%{?rcrev}
Use git to apply patches
2015-07-09 19:46:07 +00:00
xzcat %{SOURCE5000} | patch -p1 -F1 -s
initial srpm import
2010-07-29 23:46:31 +00:00
%if 0%{?gitrev}
Use git to apply patches
2015-07-09 19:46:07 +00:00
xzcat %{SOURCE5001} | patch -p1 -F1 -s
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Use git to apply patches
2015-07-09 19:46:07 +00:00
xzcat %{SOURCE5000} | patch -p1 -F1 -s
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
Use git to apply patches
2015-07-09 19:46:07 +00:00
git init
git config user.email "kernel-team@fedoraproject.org"
git config user.name "Fedora Kernel Team"
git config gc.auto 0
git add .
git commit -a -q -m "baseline"
initial srpm import
2010-07-29 23:46:31 +00:00
cd ..
fi
%endif
else
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# We already have all vanilla dirs, just change to the top-level directory.
cd kernel-%{kversion}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
fi
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Now build the fedora kernel tree.
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al vanilla-%{vanillaversion} linux-%{KVERREL}
initial srpm import
2010-07-29 23:46:31 +00:00
Build in a fully versioned directory Switch to building in linux-%{KVERREL} so we have a fully versioned directory. This also helps (but doesn't solve) rhbz 751195.
2012-02-22 23:54:17 +00:00
cd linux-%{KVERREL}
Linux v4.2 Also add a check for a created git dir. We don't handle the released_kernel case otherwise. I'll have to go back and fix this later.
2015-08-31 15:28:03 +00:00
if [ ! -d .git ]; then
git init
git config user.email "kernel-team@fedoraproject.org"
git config user.name "Fedora Kernel Team"
git config gc.auto 0
git add .
git commit -a -q -m "baseline"
fi
initial srpm import
2010-07-29 23:46:31 +00:00
# released_kernel with possible stable updates
%if 0%{?stable_base}
Use git to apply patches
2015-07-09 19:46:07 +00:00
# This is special because the kernel spec is hell and nothing is consistent
xzcat %{SOURCE5000} | patch -p1 -F1 -s
git commit -a -m "Stable update"
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# Drop some necessary files from the source dir into the buildroot
cp $RPM_SOURCE_DIR/config-* .
cp %{SOURCE15} .
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
%if !%{debugbuildsenabled}
Add build option "--with=release" to build a non-debug kernel in rawhide.
2011-10-27 15:47:50 +00:00
%if %{with_release}
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
# The normal build is a really debug build and the user has explicitly requested
Add build option "--with=release" to build a non-debug kernel in rawhide.
2011-10-27 15:47:50 +00:00
# a release kernel. Change the config files into non-debug versions.
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
make -f %{SOURCE19} config-release
%endif
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# Dynamically generate kernel .config files from config-* files
make -f %{SOURCE20} VERSION=%{version} configs
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
# Merge in any user-provided local config option changes
Don't try and merge local config changes on arches we aren't building
2014-05-13 15:29:55 +00:00
%ifnarch %nobuildarches
attempt to fix config-local, by only applying the overrides to the target configs
2014-01-22 16:01:13 +00:00
for i in %{all_arch_configs}
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
do
mv $i $i.tmp
./merge.pl %{SOURCE1000} $i.tmp > $i
rm $i.tmp
done
Don't try and merge local config changes on arches we aren't building
2014-05-13 15:29:55 +00:00
%endif
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
Use git to apply patches
2015-07-09 19:46:07 +00:00
# The kbuild-AFTER_LINK patch is needed regardless so we list it as a Source
# file and apply it separately from the rest.
git am %{SOURCE5005}
initial srpm import
2010-07-29 23:46:31 +00:00
%if !%{nopatches}
Use git to apply patches
2015-07-09 19:46:07 +00:00
git am %{patches}
Add patch to fix touchpad issues on Razer machines (rhbz 1227891)
2015-06-18 23:00:58 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# END OF PATCH APPLICATIONS
%endif
# Any further pre-build tree manipulations happen here.
chmod +x scripts/checkpatch.pl
document this magic from the commit msg.
2011-08-02 19:55:13 +00:00
# This Prevents scripts/setlocalversion from mucking with our version numbers.
fix make local, ditto from f14
2010-08-17 14:34:59 +00:00
touch .scmversion
initial srpm import
2010-07-29 23:46:31 +00:00
# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches
mkdir configs
%if !%{debugbuildsenabled}
rm -f kernel-%{version}-*debug.config
%endif
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%define make make %{?cross_opts}
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
# now run oldconfig over all the config files
for i in *.config
do
mv $i .config
Arch=`head -1 .config | cut -b 3-`
make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true
%if %{listnewconfig_fail}
if [ -s .newoptions ]; then
cat .newoptions
exit 1
fi
%endif
rm -f .newoptions
make ARCH=$Arch oldnoconfig
echo "# $Arch" > configs/$i
cat .config >> configs/$i
done
initial srpm import
2010-07-29 23:46:31 +00:00
# end of kernel config
%endif
Remove infrastructure related to compat-wireless integration
2012-03-13 17:26:37 +00:00
# get rid of unwanted files resulting from patch fuzz
find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null
remove .gitignores from the source tree, so they don't end up getting packaged.
2010-10-26 17:56:20 +00:00
# remove unnecessary SCM files
find . -name .gitignore -exec rm -f {} \; >/dev/null
initial srpm import
2010-07-29 23:46:31 +00:00
cd ..
###
### build
###
%build
%if %{with_sparse}
%define sparse_mflags C=1
%endif
Convert fancy_debuginfo into with_debuginfo in the 21st century
2011-10-26 14:53:45 +00:00
%if %{with_debuginfo}
initial srpm import
2010-07-29 23:46:31 +00:00
# This override tweaks the kernel makefiles so that we run debugedit on an
# object before embedding it. When we later run find-debuginfo.sh, it will
# run debugedit again. The edits it does change the build ID bits embedded
# in the stripped object, but repeating debugedit is a no-op. We do it
# beforehand to get the proper final build ID bits into the embedded image.
# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
export AFTER_LINK=\
'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
-i $@ > $@.id"'
%endif
cp_vmlinux()
{
eu-strip --remove-comment -o "$2" "$1"
}
BuildKernel() {
MakeTarget=$1
KernelImage=$2
Flavour=$3
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
Flav=${Flavour:++${Flavour}}
initial srpm import
2010-07-29 23:46:31 +00:00
InstallName=${4:-vmlinuz}
# Pick the right config file for the kernel we're building
Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
flavour flav in the hiz-ouse
2013-01-25 15:00:02 +00:00
DevelDir=/usr/src/kernels/%{KVERREL}${Flav}
initial srpm import
2010-07-29 23:46:31 +00:00
# When the bootable image is just the ELF kernel, strip it.
# We already copy the unstripped file into the debuginfo package.
if [ "$KernelImage" = vmlinux ]; then
CopyKernel=cp_vmlinux
else
CopyKernel=cp
fi
flavour flav in the hiz-ouse
2013-01-25 15:00:02 +00:00
KernelVer=%{version}-%{release}.%{_target_cpu}${Flav}
initial srpm import
2010-07-29 23:46:31 +00:00
echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...
Linux-3.1-rc1 Adjust Makefile munging for 3.x numbering scheme
2011-08-08 14:17:46 +00:00
%if 0%{?stable_update}
# make sure SUBLEVEL is incremented on a stable release. Sigh 3.x.
perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# make sure EXTRAVERSION says what we want it to say
flavour flav in the hiz-ouse
2013-01-25 15:00:02 +00:00
perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flav}/" Makefile
initial srpm import
2010-07-29 23:46:31 +00:00
Adjust sedding for the 3.x release style now that we know it's 3.x.x and not just 3.x
2011-07-29 17:55:57 +00:00
# if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
initial srpm import
2010-07-29 23:46:31 +00:00
%if !0%{?rcrev}
%if 0%{?gitrev}
Adjust sedding for the 3.x release style now that we know it's 3.x.x and not just 3.x
2011-07-29 17:55:57 +00:00
perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
# and now to start the build process
mrproper doesn't need $CROSS_COMPILE set
2013-06-14 15:45:28 +00:00
make -s mrproper
initial srpm import
2010-07-29 23:46:31 +00:00
cp configs/$Config .config
Update modsign to add 'make modules_sign' target with latest upstream
2012-10-23 16:02:53 +00:00
%if %{signmodules}
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
cp %{SOURCE11} certs/.
Update modsign to add 'make modules_sign' target with latest upstream
2012-10-23 16:02:53 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
Arch=`head -1 .config | cut -b 3-`
echo USING ARCH=$Arch
First pass at 2.6.36-rc1
2010-08-17 20:06:35 +00:00
make -s ARCH=$Arch oldnoconfig >/dev/null
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make} -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
%{make} -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
Reenable perf on ARM (was suppose to be temporary), Build and package dtbs on ARM
2013-01-27 16:17:49 +00:00
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
%if %{with_debuginfo}
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif
[arm64] install dtbs
2013-09-03 15:49:09 +00:00
%ifarch %{arm} aarch64
kernel-arm64.patch: fix up build... no idea if it works
2015-01-07 19:39:48 +00:00
%{make} -s ARCH=$Arch V=1 dtbs dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
Correct dtb copying
2015-05-11 18:35:02 +00:00
cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
kernel-arm64.patch: fix up build... no idea if it works
2015-01-07 19:39:48 +00:00
find arch/$Arch/boot/dts -name '*.dtb' -type f | xargs rm -f
LLSYMS_EXTRA_PASS=1 is only able to be set via environment variables pass it in on the make line for arm only
2012-04-12 15:47:31 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# Start installing the results
install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
initial srpm import
2010-07-29 23:46:31 +00:00
install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
initial srpm import
2010-07-29 23:46:31 +00:00
# We estimate the size of the initramfs because rpm needs to take this size
# into consideration when performing disk space calculations. (See bz #530778)
dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
if [ -f arch/$Arch/boot/zImage.stub ]; then
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
initial srpm import
2010-07-29 23:46:31 +00:00
fi
Sign kernels with pesign if we're build with signmodules. This is jwb's patch modified to work with %pesign .
2012-08-14 19:40:18 +00:00
%if %{signmodules}
# Sign the image if we're using EFI
%pesign -s -i $KernelImage -o vmlinuz.signed
Add zero file length check to make sure pesign didn't fail (rhbz 991808)
2013-08-07 13:45:49 +00:00
if [ ! -s vmlinuz.signed ]; then
echo "pesigning failed"
exit 1
fi
Sign kernels with pesign if we're build with signmodules. This is jwb's patch modified to work with %pesign .
2012-08-14 19:40:18 +00:00
mv vmlinuz.signed $KernelImage
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
$CopyKernel $KernelImage \
$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
initial srpm import
2010-07-29 23:46:31 +00:00
Ship hmac file for vmlinuz for FIPS-140 (rhbz 805538)
2012-03-21 19:09:49 +00:00
# hmac sign the kernel for FIPS
echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
Ship hmac file for vmlinuz for FIPS-140 (rhbz 805538)
2012-03-21 19:09:49 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# Override $(mod-fw) because we don't want it to install any firmware
Drop the kernel-firmware subpackage from the spec file We've depended on linux-firmware as a separate package for enough releases, and kernel-firmware hasn't had firmware updated in it for a long time.
2011-10-26 14:18:33 +00:00
# we'll get it from the linux-firmware package and we don't want conflicts
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make} -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
%ifarch %{vdso_arches}
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make} -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
initial srpm import
2010-07-29 23:46:31 +00:00
if [ ! -s ldconfig-kernel.conf ]; then
echo > ldconfig-kernel.conf "\
# Placeholder file, no vDSO hwcap entries used in this kernel."
fi
%{__install} -D -m 444 ldconfig-kernel.conf \
$RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
Linux v3.16-rc4-28-g163e40743f73 - Fix bogus vdso .build-id links (rhbz 1117563)
2014-07-09 16:58:24 +00:00
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# And save the headers/makefiles etc for building modules against
#
# This all looks scary, but the end result is supposed to be:
# * all arch relevant include/ files
# * all Makefile/Kconfig files
# * all script/ files
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
(cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
# dirs for additional modules per module-init-tools, kbuild/modules.txt
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
# first copy everything
cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -s Module.markers ]; then
cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
fi
# then drop all but the needed Makefiles/Kconfig files
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -d arch/$Arch/scripts ]; then
cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
fi
if [ -f arch/$Arch/*lds ]; then
cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
fi
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
Remove ppc32 support The powerpc secondary arch team has disabled all ppc32 builds in koji for F21 and beyond: https://lists.fedoraproject.org/pipermail/ppc/2014-May/002801.html FESCo also recently said that dropped or new architectures must essentially prove they have an active and viable effort behind them before being considered for Secondary Arch support. This effort has not materialized in the interim since the current powerpc team dropped ppc32. There's little point in keeping support for ppc32 support in the kernel package when it will never be built. This also removes the -smp variant and with_smp* support, as that was only used on ppc32.
2014-09-08 18:43:02 +00:00
%ifarch %{power64}
initial srpm import
2010-07-29 23:46:31 +00:00
cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
if [ -d arch/%{asmarch}/include ]; then
cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
install arch/arm/include/asm/xen headers on aarch64
2014-05-05 21:46:26 +00:00
%ifarch aarch64
# arch/arm64/include/asm/xen references arch/arm
cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
ARM: include the mach- headers on arm arches if they are available
2012-06-28 19:06:48 +00:00
# include the machine specific headers for ARM variants, if available.
%ifarch %{arm}
if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then
cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
# Make sure the Makefile and version.h have a matching timestamp so that
# external modules can be built
Linux v3.7-rc2-145-g4864ccb
2012-10-25 19:52:49 +00:00
touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h
Don't create empty include/linux/autoconf.h in kernel-devel (rhbz 854689)
2012-09-05 18:20:56 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
Convert fancy_debuginfo into with_debuginfo in the 21st century
2011-10-26 14:53:45 +00:00
%if %{with_debuginfo}
initial srpm import
2010-07-29 23:46:31 +00:00
if test -s vmlinux.id; then
cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
else
Make build ID lossage break the build.
2010-08-17 01:15:33 +00:00
echo >&2 "*** ERROR *** no vmlinux build ID! ***"
exit 1
initial srpm import
2010-07-29 23:46:31 +00:00
fi
#
# save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
#
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
%endif
find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
# mark modules executable so that strip-to-file can strip them
xargs --no-run-if-empty chmod u+x < modnames
# Generate a list of modules for block and networking.
stop using the obsolete forms of grep shortcuts.
2010-10-26 17:49:21 +00:00
grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
initial srpm import
2010-07-29 23:46:31 +00:00
sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
collect_modules_list()
{
sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
Add nvme.ko to modules.block for anaconda
2013-09-17 14:30:52 +00:00
LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
if [ ! -z "$3" ]; then
fix thinko
2013-09-17 16:40:46 +00:00
sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
Add nvme.ko to modules.block for anaconda
2013-09-17 14:30:52 +00:00
fi
initial srpm import
2010-07-29 23:46:31 +00:00
}
collect_modules_list networking \
Add blk_queue_physical_block_size and register_netdevice to the symbols used for initrd generation (synched from .el6)
2013-02-26 16:43:19 +00:00
'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
initial srpm import
2010-07-29 23:46:31 +00:00
collect_modules_list block \
Add nvme.ko to modules.block for anaconda
2013-09-17 14:30:52 +00:00
'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
initial srpm import
2010-07-29 23:46:31 +00:00
collect_modules_list drm \
'drm_open|drm_init'
collect_modules_list modesetting \
'drm_crtc_init'
# detect missing or incorrect license tags
rewrite modinfo license check to be less noisy
2013-05-21 18:29:19 +00:00
( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
initial srpm import
2010-07-29 23:46:31 +00:00
Fix modules.* removal from /lib/modules/$KernelVer
2013-05-24 02:54:14 +00:00
# remove files that will be auto generated by depmod at rpm -i time
pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep}
popd
Move the modules-extra processing to a script
2012-09-14 16:25:07 +00:00
# Call the modules-extra script to move things around
%{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE16}
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# Generate the kernel-core and kernel-modules files lists
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
# Copy the System.map file for depmod to use, and create a backup of the
# full module tree so we can restore it after we're done filtering
cp System.map $RPM_BUILD_ROOT/.
pushd $RPM_BUILD_ROOT
mkdir restore
cp -r lib/modules/$KernelVer/* restore/.
# don't include anything going into k-m-e in the file lists
rm -rf lib/modules/$KernelVer/extra
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# Find all the module files and filter them out into the core and modules
# lists. This actually removes anything going into -modules from the dir.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
cp $RPM_SOURCE_DIR/filter-*.sh .
%{SOURCE99} modules.list %{_target_cpu}
rm filter-*.sh
# Run depmod on the resulting module tree and make sure it isn't broken
Make depmod call fatal if it errors or warns
2014-04-29 21:28:19 +00:00
depmod -b . -aeF ./System.map $KernelVer &> depmod.out
if [ -s depmod.out ]; then
echo "Depmod failure"
cat depmod.out
exit 1
else
rm depmod.out
fi
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# remove files that will be auto generated by depmod at rpm -i time
pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep}
popd
# Go back and find all of the various directories in the tree. We use this
# for the dir lists in kernel-core
find lib/modules/$KernelVer/kernel -type d | sort -n > module-dirs.list
# Cleanup
rm System.map
cp -r restore/* lib/modules/$KernelVer/.
rm -rf restore
popd
# Make sure the files lists start with absolute paths or rpmbuild fails.
# Also add in the dir entries
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list
sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# Cleanup
rm -f $RPM_BUILD_ROOT/k-d.list
rm -f $RPM_BUILD_ROOT/modules.list
rm -f $RPM_BUILD_ROOT/module-dirs.list
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
%if %{signmodules}
we don't need .tmp_versions anymore
2013-01-28 15:43:22 +00:00
# Save the signing keys so we can sign the modules in __modsign_install_post
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
cp certs/signing_key.pem certs/signing_key.pem.sign${Flav}
cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav}
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# Move the devel headers out of the root file system
fix thinko in previous commit, resulting in /usr/src/kernels/$ver/build/
2010-12-06 17:49:34 +00:00
mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
initial srpm import
2010-07-29 23:46:31 +00:00
mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
Make build/ point to /usr/src/kernels instead of being relative (rhbz 788125)
2012-02-07 17:02:45 +00:00
# This is going to create a broken link during the build, but we don't use
# it after this point. We need the link to actually point to something
# when kernel-devel is installed, and a relative link doesn't work across
# the F17 UsrMove feature.
ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
don't prune kernel-devel in the %with_headers install section commit c1bdfc8b broke the build on s390 since it is headers only, and had nothing installed in /usr/src/kernels... since kernel-devel is only produced when there's a BuildKernel, just prune '*.cmd' when doing BuildKernel for the same net result.
2010-12-06 15:41:38 +00:00
# prune junk from kernel-devel
find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \;
initial srpm import
2010-07-29 23:46:31 +00:00
}
###
# DO it...
###
# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
Build in a fully versioned directory Switch to building in linux-%{KVERREL} so we have a fully versioned directory. This also helps (but doesn't solve) rhbz 751195.
2012-02-22 23:54:17 +00:00
cd linux-%{KVERREL}
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_debug}
BuildKernel %make_target %kernel_image debug
%endif
%if %{with_pae_debug}
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
BuildKernel %make_target %kernel_image %{pae}debug
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%if %{with_pae}
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
BuildKernel %make_target %kernel_image %{pae}
setup config for tegra based arm boards, add device tree patches for arm build tegra and omap kernel on arm
2011-08-16 16:33:15 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_up}
BuildKernel %make_target %kernel_image
%endif
Avoid CFLAGS changing across building perf
2011-11-16 19:31:36 +00:00
%global perf_make \
Don't build perf-read-vdsox32 either
2015-08-26 16:39:19 +00:00
make -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} %{?_smp_mflags} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix}
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_perf}
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# perf
Wrap doc BR in with_doc - Stop building perf in build AND install because that's stupid - Use prebuilt perf man pages
2013-12-14 14:52:27 +00:00
%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_tools}
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%ifarch %{cpupowerarchs}
# cpupower
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false
3.1-rc3-git5 cleanup some of the cpupowerutils build stuff
2011-08-26 12:30:26 +00:00
%ifarch %{ix86}
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
pushd tools/power/cpupower/debug/i386
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make} %{?_smp_mflags} centrino-decode powernow-k8-decode
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
3.1-rc3-git5 cleanup some of the cpupowerutils build stuff
2011-08-26 12:30:26 +00:00
%endif
%ifarch x86_64
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
pushd tools/power/cpupower/debug/x86_64
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make} %{?_smp_mflags} centrino-decode powernow-k8-decode
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
3.1-rc3-git5 cleanup some of the cpupowerutils build stuff
2011-08-26 12:30:26 +00:00
%endif
Linux 3.3-rc2-git4 (upstream 23783f817bceedd6d4e549385e3f400ea64059e5) Build and ship turbostat and x86_energy_perf_policy in kernel tools
2012-02-06 17:44:21 +00:00
%ifarch %{ix86} x86_64
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
pushd tools/power/x86/x86_energy_perf_policy/
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make}
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
pushd tools/power/x86/turbostat
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make}
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
Linux 3.3-rc2-git4 (upstream 23783f817bceedd6d4e549385e3f400ea64059e5) Build and ship turbostat and x86_energy_perf_policy in kernel tools
2012-02-06 17:44:21 +00:00
%endif #turbostat/x86_energy_perf_policy
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%endif
Linux v3.12-8333-g4fbf888 - Build tmon in kernel-tools - Disable ARM NEON optimised AES and OMAP2PLUS cpufreq because they don't build
2013-11-14 16:23:15 +00:00
pushd tools/thermal/tmon/
%{make}
popd
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
# In the modsign case, we do 3 things. 1) We check the "flavour" and hard
# code the value in the following invocations. This is somewhat sub-optimal
# but we're doing this inside of an RPM macro and it isn't as easy as it
# could be because of that. 2) We restore the .tmp_versions/ directory from
# the one we saved off in BuildKernel above. This is to make sure we're
# signing the modules we actually built/installed in that flavour. 3) We
sign all modules with the extras signing script
2013-01-25 18:53:02 +00:00
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
#
# We have to do all of those things _after_ find-debuginfo runs, otherwise
# that will strip the signature off of the modules.
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
%define __modsign_install_post \
wat (!= -ne)
2013-04-08 14:31:23 +00:00
if [ "%{signmodules}" -eq "1" ]; then \
simplify the signing stuff now that sign-file takes pub/priv key args also fix %{with_*} tests (which jan stancek sent for rhel, thanks!)
2013-03-28 19:01:42 +00:00
if [ "%{with_pae}" -ne "0" ]; then \
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
%{modsign_cmd} certs/signing_key.pem.sign+%{pae} certs/signing_key.x509.sign+%{pae} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+%{pae}/ \
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
fi \
simplify the signing stuff now that sign-file takes pub/priv key args also fix %{with_*} tests (which jan stancek sent for rhel, thanks!)
2013-03-28 19:01:42 +00:00
if [ "%{with_debug}" -ne "0" ]; then \
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
%{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
fi \
simplify the signing stuff now that sign-file takes pub/priv key args also fix %{with_*} tests (which jan stancek sent for rhel, thanks!)
2013-03-28 19:01:42 +00:00
if [ "%{with_pae_debug}" -ne "0" ]; then \
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
%{modsign_cmd} certs/signing_key.pem.sign+%{pae}debug certs/signing_key.x509.sign+%{pae}debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+%{pae}debug/ \
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
fi \
wat (!= -ne)
2013-04-08 14:31:23 +00:00
if [ "%{with_up}" -ne "0" ]; then \
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
%{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
fi \
fi \
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
if [ "%{zipmodules}" -eq "1" ]; then \
find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs xz; \
fi \
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
###
### Special hacks for debuginfo subpackages.
###
# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}
%if %{with_debuginfo}
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
%define __debug_install_post \
/usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\
%{nil}
initial srpm import
2010-07-29 23:46:31 +00:00
%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%defattr(-,root,root)
%endif
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
#
# Disgusting hack alert! We need to ensure we sign modules *after* all
# invocations of strip occur, which is in __debug_install_post if
# find-debuginfo.sh runs, and __os_install_post if not.
#
%define __spec_install_post \
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{__modsign_install_post}
initial srpm import
2010-07-29 23:46:31 +00:00
###
### install
###
%install
Build in a fully versioned directory Switch to building in linux-%{KVERREL} so we have a fully versioned directory. This also helps (but doesn't solve) rhbz 751195.
2012-02-22 23:54:17 +00:00
cd linux-%{KVERREL}
initial srpm import
2010-07-29 23:46:31 +00:00
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_headers}
# Install kernel headers
make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
find $RPM_BUILD_ROOT/usr/include \
\( -name .install -o -name .check -o \
-name ..install.cmd -o -name ..check.cmd \) | xargs rm -f
%endif
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_perf}
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# perf tool binary and supporting scripts/binaries
Linux v3.17-8307-gf1d0d14120a8
2014-10-14 13:36:10 +00:00
%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin install-traceevent-plugins
Linux v3.12-4849-g10d0c97 Replace x86-allow-1024-cpus.patch with the patch that contains the one hunk not already applied upstream. Don't install the 'trace' alias symlink for 'perf trace'. Seems much too generic to just throw that into /usr/bin
2013-11-12 18:22:52 +00:00
# remove the 'trace' symlink.
rm -f %{buildroot}%{_bindir}/trace
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
Build a python-perf sub-package.
2011-10-31 20:01:28 +00:00
# python-perf extension
Avoid CFLAGS changing across building perf
2011-11-16 19:31:36 +00:00
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
Build a python-perf sub-package.
2011-10-31 20:01:28 +00:00
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# perf man pages (note: implicit rpm magic compresses them later)
Wrap doc BR in with_doc - Stop building perf in build AND install because that's stupid - Use prebuilt perf man pages
2013-12-14 14:52:27 +00:00
mkdir -p %{buildroot}/%{_mandir}/man1
pushd %{buildroot}/%{_mandir}/man1
tar -xf %{SOURCE10}
popd
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_tools}
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%ifarch %{cpupowerarchs}
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
3.1-rc3-git5 cleanup some of the cpupowerutils build stuff
2011-08-26 12:30:26 +00:00
%ifarch %{ix86}
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
pushd tools/power/cpupower/debug/i386
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
3.1-rc3-git5 cleanup some of the cpupowerutils build stuff
2011-08-26 12:30:26 +00:00
%endif
%ifarch x86_64
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
pushd tools/power/cpupower/debug/x86_64
3.1-rc3-git5 cleanup some of the cpupowerutils build stuff
2011-08-26 12:30:26 +00:00
install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
3.1-rc3-git5 cleanup some of the cpupowerutils build stuff
2011-08-26 12:30:26 +00:00
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
%endif
Linux 3.3-rc2-git4 (upstream 23783f817bceedd6d4e549385e3f400ea64059e5) Build and ship turbostat and x86_energy_perf_policy in kernel tools
2012-02-06 17:44:21 +00:00
%ifarch %{ix86} x86_64
mkdir -p %{buildroot}%{_mandir}/man8
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
pushd tools/power/x86/x86_energy_perf_policy
Linux 3.3-rc2-git4 (upstream 23783f817bceedd6d4e549385e3f400ea64059e5) Build and ship turbostat and x86_energy_perf_policy in kernel tools
2012-02-06 17:44:21 +00:00
make DESTDIR=%{buildroot} install
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
pushd tools/power/x86/turbostat
Linux 3.3-rc2-git4 (upstream 23783f817bceedd6d4e549385e3f400ea64059e5) Build and ship turbostat and x86_energy_perf_policy in kernel tools
2012-02-06 17:44:21 +00:00
make DESTDIR=%{buildroot} install
use pushd/popd instead of cd/cd- (since cd - && cd - is idempotent)
2013-01-25 15:29:40 +00:00
popd
Linux 3.3-rc2-git4 (upstream 23783f817bceedd6d4e549385e3f400ea64059e5) Build and ship turbostat and x86_energy_perf_policy in kernel tools
2012-02-06 17:44:21 +00:00
%endif #turbostat/x86_energy_perf_policy
Linux v3.12-8333-g4fbf888 - Build tmon in kernel-tools - Disable ARM NEON optimised AES and OMAP2PLUS cpufreq because they don't build
2013-11-14 16:23:15 +00:00
pushd tools/thermal/tmon
make INSTALL_ROOT=%{buildroot} install
popd
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_bootwrapper}
make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts
%endif
###
### clean
###
%clean
rm -rf $RPM_BUILD_ROOT
###
### scripts
###
Make sure %post/%postun for kernel-tools is wrapped with %{with_tools} otherwise noarch fails (also make prep)
2011-08-18 02:14:23 +00:00
%if %{with_tools}
run ldconfig against kernel-tools-libs not kernel-tools
2015-09-13 13:16:48 +00:00
%post -n kernel-tools-libs
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
/sbin/ldconfig
run ldconfig against kernel-tools-libs not kernel-tools
2015-09-13 13:16:48 +00:00
%postun -n kernel-tools-libs
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
/sbin/ldconfig
Make sure %post/%postun for kernel-tools is wrapped with %{with_tools} otherwise noarch fails (also make prep)
2011-08-18 02:14:23 +00:00
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
#
# This macro defines a %%post script for a kernel*-devel package.
# %%kernel_devel_post [<subpackage>]
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
. /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
then\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
(cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
initial srpm import
2010-07-29 23:46:31 +00:00
/usr/bin/find . -type f | while read f; do\
hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
done)\
fi\
%{nil}
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
# This macro defines a %%post script for a kernel*-modules-extra package.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# It also defines a %%postun script that does the same thing.
Linux v3.11-rc1 - Disable debugging options. - Fix %kernel_modules warning.
2013-07-17 02:56:52 +00:00
# %%kernel_modules_extra_post [<subpackage>]
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
%define kernel_modules_extra_post() \
%{expand:%%post %{?1:%{1}-}modules-extra}\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# This macro defines a %%post script for a kernel*-modules package.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# It also defines a %%postun script that does the same thing.
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# %%kernel_modules_post [<subpackage>]
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%define kernel_modules_post() \
%{expand:%%post %{?1:%{1}-}modules}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%{expand:%%postun %{?1:%{1}-}modules}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
%{nil}
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# This macro defines a %%posttrans script for a kernel package.
# %%kernel_variant_posttrans [<subpackage>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans() \
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%posttrans %{?1:%{1}-}core}\
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
#
# This macro defines a %%post script for a kernel package and its devel package.
# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%{expand:%%kernel_modules_post %{?-v*}}\
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
%{expand:%%kernel_modules_extra_post %{?-v*}}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{expand:%%kernel_variant_posttrans %{?-v*}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%post %{?-v*:%{-v*}-}core}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
[ -f /etc/sysconfig/kernel ]; then\
/bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
%{nil}
#
# This macro defines a %%preun script for a kernel package.
# %%kernel_variant_preun <subpackage>
#
%define kernel_variant_preun() \
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%preun %{?1:%{1}-}core}\
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
%kernel_variant_preun
%kernel_variant_post -r kernel-smp
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%kernel_variant_preun %{pae}
%kernel_variant_post -v %{pae} -r (kernel|kernel-smp)
%kernel_variant_post -v %{pae}debug -r (kernel|kernel-smp)
%kernel_variant_preun %{pae}debug
initial srpm import
2010-07-29 23:46:31 +00:00
%kernel_variant_preun debug
%kernel_variant_post -v debug
if [ -x /sbin/ldconfig ]
then
/sbin/ldconfig -X || exit $?
fi
###
### file lists
###
%if %{with_headers}
%files headers
%defattr(-,root,root)
/usr/include/*
%endif
%if %{with_bootwrapper}
%files bootwrapper
%defattr(-,root,root)
/usr/sbin/*
%{_libdir}/kernel-wrapper
%endif
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_perf}
%files -n perf
initial srpm import
2010-07-29 23:46:31 +00:00
%defattr(-,root,root)
%{_bindir}/perf
perf: install trace-event plugins perf hardcodes $libdir to be lib for all but x86_64, so kludge around it until upstream gets their act together. --kyle
2014-06-02 19:11:01 +00:00
%dir %{_libdir}/traceevent/plugins
%{_libdir}/traceevent/plugins/*
initial srpm import
2010-07-29 23:46:31 +00:00
%dir %{_libexecdir}/perf-core
%{_libexecdir}/perf-core/*
Linux v4.2-2744-g65a99597f044 - Reenable debugging options.
2015-09-01 16:25:34 +00:00
%{_datadir}/perf-core/*
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%{_mandir}/man[1-8]/perf*
Add perf bash_completion file
2012-10-05 20:39:01 +00:00
%{_sysconfdir}/bash_completion.d/perf
Build in a fully versioned directory Switch to building in linux-%{KVERREL} so we have a fully versioned directory. This also helps (but doesn't solve) rhbz 751195.
2012-02-22 23:54:17 +00:00
%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%files -n python-perf
%defattr(-,root,root)
Revert "clean up some debuginfo stuff & python-sitearch" This reverts commit d0c82b7f5af913cac8533e7e2dbd2a149eaf42f0. Doing local builds via fedpkg local results in %{python_sitearch} not being expanded properly and the build failing. We also see that all of the .ko files have no symbols. Just reverting it for now.
2014-12-03 15:52:44 +00:00
%{python_sitearch}
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_debuginfo}
%files -f perf-debuginfo.list -n perf-debuginfo
%defattr(-,root,root)
Add python-perf-debuginfo package (rhbz 752140)
2011-11-08 19:44:50 +00:00
%files -f python-perf-debuginfo.list -n python-perf-debuginfo
%defattr(-,root,root)
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%endif
%endif # with_perf
Split out perf-debuginfo subpackage.
2011-03-04 23:40:12 +00:00
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%if %{with_tools}
Oops, missed a few more -n for kernel-tools Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:08:25 +00:00
%files -n kernel-tools -f cpupower.lang
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%defattr(-,root,root)
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%ifarch %{cpupowerarchs}
%{_bindir}/cpupower
Add mac80211 deauth fix pointed out by Stanislaw Gruszka Add arch guards in files section for kernel-tools subpackage
2012-01-23 13:32:36 +00:00
%ifarch %{ix86} x86_64
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%{_bindir}/centrino-decode
%{_bindir}/powernow-k8-decode
Add mac80211 deauth fix pointed out by Stanislaw Gruszka Add arch guards in files section for kernel-tools subpackage
2012-01-23 13:32:36 +00:00
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%{_unitdir}/cpupower.service
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%{_mandir}/man[1-8]/cpupower*
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
Linux 3.3-rc2-git4 (upstream 23783f817bceedd6d4e549385e3f400ea64059e5) Build and ship turbostat and x86_energy_perf_policy in kernel tools
2012-02-06 17:44:21 +00:00
%ifarch %{ix86} x86_64
%{_bindir}/x86_energy_perf_policy
%{_mandir}/man8/x86_energy_perf_policy*
%{_bindir}/turbostat
%{_mandir}/man8/turbostat*
%endif
Linux v3.12-8333-g4fbf888 - Build tmon in kernel-tools - Disable ARM NEON optimised AES and OMAP2PLUS cpufreq because they don't build
2013-11-14 16:23:15 +00:00
%{_bindir}/tmon
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%endif
Split out perf-debuginfo subpackage.
2011-03-04 23:40:12 +00:00
%if %{with_debuginfo}
And one more missing -n for kernel-tools Yeah, I shouldn't be committing things to the Fedora kernel tree when I haven't done so in years, and its after 2am on a Saturday night. I promise I haven't been drinking though... Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:10:02 +00:00
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
Split out perf-debuginfo subpackage.
2011-03-04 23:40:12 +00:00
%defattr(-,root,root)
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%ifarch %{cpupowerarchs}
Oops, missed a few more -n for kernel-tools Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:08:25 +00:00
%files -n kernel-tools-libs
Split out kernel-tools-libs (rhbz 859943)
2012-09-28 12:31:01 +00:00
%{_libdir}/libcpupower.so.0
%{_libdir}/libcpupower.so.0.0.0
Oops, missed a few more -n for kernel-tools Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:08:25 +00:00
%files -n kernel-tools-libs-devel
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%endif
Restore perf sub-package for great justice
2011-11-01 14:23:43 +00:00
%endif # with_perf
initial srpm import
2010-07-29 23:46:31 +00:00
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# empty meta-package
%files
%defattr(-,root,root)
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# This is %%{image_install_path} on an arch where that includes ELF files,
initial srpm import
2010-07-29 23:46:31 +00:00
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
# %%kernel_variant_files [-k vmlinux] <condition> <subpackage>
#
%define kernel_variant_files(k:) \
%if %{1}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%files -f kernel-%{?2:%{2}-}core.list %{?2:%{2}-}core}\
initial srpm import
2010-07-29 23:46:31 +00:00
%defattr(-,root,root)\
fix license handling. no build here, it can wait for the next kernel build to be applied
2014-07-12 22:37:40 +00:00
%{!?_licensedir:%global license %%doc}\
%license linux-%{KVERREL}/COPYING\
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
/lib/modules/%{KVERREL}%{?2:+%{2}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:+%{2}}\
/lib/modules/%{KVERREL}%{?2:+%{2}}/.vmlinuz.hmac \
%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?2:+%{2}}.hmac \
[arm64] install dtbs
2013-09-03 15:49:09 +00:00
%ifarch %{arm} aarch64\
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
/lib/modules/%{KVERREL}%{?2:+%{2}}/dtb \
%ghost /%{image_install_path}/dtb-%{KVERREL}%{?2:+%{2}} \
Reenable perf on ARM (was suppose to be temporary), Build and package dtbs on ARM
2013-01-27 16:17:49 +00:00
%endif\
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
%attr(600,root,root) /lib/modules/%{KVERREL}%{?2:+%{2}}/System.map\
%ghost /boot/System.map-%{KVERREL}%{?2:+%{2}}\
/lib/modules/%{KVERREL}%{?2:+%{2}}/config\
%ghost /boot/config-%{KVERREL}%{?2:+%{2}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%ghost /boot/initramfs-%{KVERREL}%{?2:+%{2}}.img\
Own the /lib/modules dir.
2014-01-25 19:00:47 +00:00
%dir /lib/modules\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
%dir /lib/modules/%{KVERREL}%{?2:+%{2}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%dir /lib/modules/%{KVERREL}%{?2:+%{2}}/kernel\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
/lib/modules/%{KVERREL}%{?2:+%{2}}/build\
/lib/modules/%{KVERREL}%{?2:+%{2}}/source\
/lib/modules/%{KVERREL}%{?2:+%{2}}/updates\
initial srpm import
2010-07-29 23:46:31 +00:00
%ifarch %{vdso_arches}\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
/lib/modules/%{KVERREL}%{?2:+%{2}}/vdso\
/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:+%{2}}.conf\
initial srpm import
2010-07-29 23:46:31 +00:00
%endif\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
/lib/modules/%{KVERREL}%{?2:+%{2}}/modules.*\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%{expand:%%files -f kernel-%{?2:%{2}-}modules.list %{?2:%{2}-}modules}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%defattr(-,root,root)\
initial srpm import
2010-07-29 23:46:31 +00:00
%{expand:%%files %{?2:%{2}-}devel}\
%defattr(-,root,root)\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
/usr/src/kernels/%{KVERREL}%{?2:+%{2}}\
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
%{expand:%%files %{?2:%{2}-}modules-extra}\
%defattr(-,root,root)\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
/lib/modules/%{KVERREL}%{?2:+%{2}}/extra\
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_debuginfo}\
%ifnarch noarch\
%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\
%defattr(-,root,root)\
%endif\
%endif\
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
%if %{?2:1} %{!?2:0}\
%{expand:%%files %{2}}\
%defattr(-,root,root)\
%endif\
initial srpm import
2010-07-29 23:46:31 +00:00
%endif\
%{nil}
%kernel_variant_files %{with_up}
%kernel_variant_files %{with_debug} debug
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%kernel_variant_files %{with_pae} %{pae}
%kernel_variant_files %{with_pae_debug} %{pae}debug
initial srpm import
2010-07-29 23:46:31 +00:00
# plz don't put in a version string unless you're going to tag
# and build.
THANKS INFO COW
2013-08-23 14:05:39 +00:00
#
#
initial srpm import
2010-07-29 23:46:31 +00:00
%changelog
Linux v4.3-rc2-19-gbcee19f - Reenable debugging options.
2015-09-22 16:48:03 +00:00
* Tue Sep 22 2015 Laura Abbott <labbott@redhat.com> - 4.3.0-0.rc2.git1.1
- Linux v4.3-rc2-19-gbcee19f
- Reenable debugging options.
Linux v4.3-rc2 Disable debugging options.
2015-09-21 17:36:49 +00:00
* Mon Sep 21 2015 Laura Abbott <labbott@redhat.com> - 4.3.0-0.rc2.git0.2
- Linux v4.3-rc2
- Disable debugging options.
Linux v4.3-rc1-131-ga7d5c18
2015-09-18 17:46:19 +00:00
* Fri Sep 18 2015 Laura Abbott <labbott@redhat.com> - 4.3.0-0.rc1.git4.1
- Linux v4.3-rc1-131-ga7d5c18
Fix oops in 32-bit kernel on 64-bit AMD cpus (rhbz 1263762)
2015-09-18 12:22:04 +00:00
* Fri Sep 18 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix oops in 32-bit kernel on 64-bit AMD cpus (rhbz 1263762)
Linux v4.3-rc1-47-g7271484
2015-09-17 18:20:38 +00:00
* Thu Sep 17 2015 Laura Abbott <labbott@redhat.com> - 4.3.0-0.rc1.git3.1
- Linux v4.3-rc1-47-g7271484
Linux v4.3-rc1-21-g865ca08
2015-09-16 18:28:56 +00:00
* Wed Sep 16 2015 Laura Abbott <labbott@redhat.com> - 4.3.0-0.rc1.git2.1
- Linux v4.3-rc1-21-g865ca08
Linux v4.3-rc1-19-gd25ed277fbd4
2015-09-15 13:19:14 +00:00
* Tue Sep 15 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc1.git1.1
- Linux v4.3-rc1-19-gd25ed277fbd4
Reenable debugging options.
2015-09-15 11:48:33 +00:00
* Mon Sep 14 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Reenable debugging options.
Linux v4.3-rc1 - Disable debugging options. Also rebase the kdbus patches against 4.3-rc1
2015-09-14 12:40:03 +00:00
* Mon Sep 14 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc1.git0.1
- Linux v4.3-rc1
- Disable debugging options.
ARMv7 update for AllWinner devices
2015-09-14 10:41:52 +00:00
* Mon Sep 14 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- ARMv7 update for AllWinner devices
Linux v4.2-11169-g64d1def7d338
2015-09-11 20:45:44 +00:00
* Fri Sep 11 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git14.1
- Linux v4.2-11169-g64d1def7d338
Linux v4.2-11142-gb0a1ea51bda4
2015-09-11 14:10:27 +00:00
* Fri Sep 11 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git13.1
- Linux v4.2-11142-gb0a1ea51bda4
Linux v4.2-10963-g519f526d391b
2015-09-11 12:29:06 +00:00
* Fri Sep 11 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git12.1
- Linux v4.2-10963-g519f526d391b
Linux v4.2-10774-g26d2177e977c
2015-09-09 17:22:00 +00:00
* Wed Sep 09 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git11.1
- Linux v4.2-10774-g26d2177e977c
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
* Wed Sep 09 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git10.1
- Linux v4.2-10637-ga794b4f32921
- Rework secure boot patchset
Config updates for ARMv7/aarch64
2015-09-08 20:20:02 +00:00
* Tue Sep 8 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Config updates for ARMv7/aarch64
Linux v4.2-9861-g4e4adb2f4628
2015-09-08 17:50:17 +00:00
* Tue Sep 08 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git9.1
- Linux v4.2-9861-g4e4adb2f4628
Fix oops in blk layer (rhbz 1237136)
2015-09-08 16:07:08 +00:00
* Tue Sep 08 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix oops in blk layer (rhbz 1237136)
Linux v4.2-9700-g7d9071a09502
2015-09-08 12:34:33 +00:00
* Sun Sep 06 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git8.1
- Linux v4.2-9700-g7d9071a09502
Add patch to fix alternatives oops from Thomas Gleixner (rhbz 1258223)
2015-09-04 17:19:48 +00:00
* Fri Sep 04 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add patch to fix alternatives oops from Thomas Gleixner (rhbz 1258223)
Linux v4.2-6663-g807249d3ada1
2015-09-04 14:28:36 +00:00
* Fri Sep 04 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git7.1
- Linux v4.2-6663-g807249d3ada1
Bump Requiers on linux-firmware for new amdgpu firmware requirements
2015-09-04 12:43:10 +00:00
* Fri Sep 04 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Bump Requiers on linux-firmware for new amdgpu firmware requirements
Linux v4.2-6105-gdd5cdb48edfd - Networking merge
2015-09-03 20:00:15 +00:00
* Thu Sep 03 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git6.1
- Linux v4.2-6105-gdd5cdb48edfd
- Networking merge
Linux v4.2-4507-g1e1a4e8f4391
2015-09-03 13:56:49 +00:00
* Thu Sep 03 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git5.1
- Linux v4.2-4507-g1e1a4e8f4391
Linux v4.2-4282-gae982073095a
2015-09-02 15:26:43 +00:00
* Wed Sep 02 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git4.1
- Linux v4.2-4282-gae982073095a
Linux v4.2-3986-g73b6fa8e49c2
2015-09-02 14:18:26 +00:00
* Wed Sep 02 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git3.1
- Linux v4.2-3986-g73b6fa8e49c2
Linux v4.2-2890-g361f7d175734
2015-09-01 19:17:24 +00:00
* Tue Sep 01 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git2.1
- Linux v4.2-2890-g361f7d175734
Linux v4.2-2744-g65a99597f044 - Reenable debugging options.
2015-09-01 16:25:34 +00:00
* Tue Sep 01 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.3.0-0.rc0.git1.1
- Linux v4.2-2744-g65a99597f044
- Reenable debugging options.
Linux v4.2 Also add a check for a created git dir. We don't handle the released_kernel case otherwise. I'll have to go back and fix this later.
2015-08-31 15:28:03 +00:00
* Mon Aug 31 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-1
- Linux v4.2
Linux v4.2-rc8-37-g4941b8f0c2b9
2015-08-28 14:50:43 +00:00
* Fri Aug 28 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc8.git3.1
- Linux v4.2-rc8-37-g4941b8f0c2b9
Fix vmware driver issues from Thomas Hellström (rhbz 1227193)
2015-08-27 17:43:42 +00:00
* Thu Aug 27 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix vmware driver issues from Thomas Hellström (rhbz 1227193)
Linux v4.2-rc8-10-gf9ed72dde34e
2015-08-27 13:10:01 +00:00
* Thu Aug 27 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc8.git2.1
- Linux v4.2-rc8-10-gf9ed72dde34e
Add patch from Hans de Goede to fix nv46 based cards (rhbz 1257534)
2015-08-27 13:10:41 +00:00
- Add patch from Hans de Goede to fix nv46 based cards (rhbz 1257534)
Add patch from Jonathon Jongsma to fix modes in qxl (rhbz 1212201)
2015-08-27 13:13:01 +00:00
- Add patch from Jonathon Jongsma to fix modes in qxl (rhbz 1212201)
Linux v4.2-rc8-10-gf9ed72dde34e
2015-08-27 13:10:01 +00:00
Linux v4.2-rc8-7-gf5db4b31b315 - Fixes x2apic panic (rhbz 1224764)
2015-08-26 12:57:01 +00:00
* Wed Aug 26 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc8.git1.1
- Linux v4.2-rc8-7-gf5db4b31b315
- Fixes x2apic panic (rhbz 1224764)
Don't build perf-read-vdsox32 either
2015-08-26 16:39:19 +00:00
- Don't build perf-read-vdsox32 either
Enable SCHEDSTATS and LATENCYTOP again (rhbz 1013225)
2015-08-26 12:45:33 +00:00
- Enable SCHEDSTATS and LATENCYTOP again (rhbz 1013225)
Build in GPIO_OMAP to fix BeagleBone boot on mSD (changes in 4.2 upstream)
2015-08-25 00:17:42 +00:00
* Mon Aug 24 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Build in GPIO_OMAP to fix BeagleBone boot on mSD (changes in 4.2 upstream)
Linux v4.2-rc8
2015-08-24 14:17:37 +00:00
* Mon Aug 24 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc8.git0.1
- Linux v4.2-rc8
Disable EFI_VARS (rhbz 1252137)
2015-08-21 21:28:04 +00:00
* Fri Aug 21 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Disable EFI_VARS (rhbz 1252137)
Linux v4.2-rc7-100-ge45fc85a2f37
2015-08-21 21:16:48 +00:00
* Fri Aug 21 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc7.git4.1
- Linux v4.2-rc7-100-ge45fc85a2f37
Linux v4.2-rc7-71-g0bad90985d39
2015-08-21 15:27:29 +00:00
* Fri Aug 21 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc7.git3.1
- Linux v4.2-rc7-71-g0bad90985d39
Minor config updates for ARMv7
2015-08-21 09:10:20 +00:00
* Fri Aug 21 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor config updates for ARMv7
Fix incorrect ext4 freezing behavior on non-journaled fs (rhbz 1250717)
2015-08-20 17:53:28 +00:00
* Thu Aug 20 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix incorrect ext4 freezing behavior on non-journaled fs (rhbz 1250717)
Linux v4.2-rc7-24-g1b647a166f07
2015-08-19 16:31:29 +00:00
* Wed Aug 19 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc7.git2.1
- Linux v4.2-rc7-24-g1b647a166f07
Linux v4.2-rc7-15-gbf6740281ed5
2015-08-18 11:42:50 +00:00
* Tue Aug 18 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc7.git1.1
- Linux v4.2-rc7-15-gbf6740281ed5
Fix iscsi issue (rhbz 1253789)
2015-08-17 15:27:15 +00:00
* Mon Aug 17 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix iscsi issue (rhbz 1253789)
Linux v4.2-rc7
2015-08-17 11:59:44 +00:00
* Mon Aug 17 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc7.git0.1
- Linux v4.2-rc7
Patch from Hans de Goede to add yoga 3 rfkill quirk (rhbz 1239050)
2015-08-16 00:54:25 +00:00
* Sat Aug 15 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Patch from Hans de Goede to add yoga 3 rfkill quirk (rhbz 1239050)
Linux v4.2-rc6-130-g7ddab73346a1
2015-08-14 14:59:25 +00:00
* Fri Aug 14 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc6.git1.1
- Linux v4.2-rc6-130-g7ddab73346a1
Bump for build
2015-08-12 18:31:18 +00:00
* Tue Aug 11 2015 Peter Robinson <pbrobinson@fedoraproject.org> - 4.2.0-0.rc6.git0.2
Drop UACCESS_WITH_MEMCPY on ARMv7 as it's broken (rhbz 1250613)
2015-08-11 21:50:52 +00:00
- Drop UACCESS_WITH_MEMCPY on ARMv7 as it's broken (rhbz 1250613)
Linux v4.2-rc6
2015-08-10 11:58:33 +00:00
* Sun Aug 09 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc6.git0.1
- Linux v4.2-rc6
Linux v4.2-rc5-78-g49d7c6559bf2
2015-08-07 14:46:55 +00:00
* Fri Aug 07 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc5.git3.1
- Linux v4.2-rc5-78-g49d7c6559bf2
Linux v4.2-rc5-42-g4e6b6ee253ce
2015-08-05 14:35:17 +00:00
* Wed Aug 05 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc5.git2.1
- Linux v4.2-rc5-42-g4e6b6ee253ce
Patch from Nicholas Kudriavtsev for Acer Switch 12 Fn keys (rhbz 1244511)
2015-08-04 18:28:47 +00:00
* Tue Aug 04 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Patch from Nicholas Kudriavtsev for Acer Switch 12 Fn keys (rhbz 1244511)
Linux v4.2-rc5-19-gc2f3ba745d1c
2015-08-04 13:49:29 +00:00
* Tue Aug 04 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc5.git1.1
- Linux v4.2-rc5-19-gc2f3ba745d1c
Always enable mmiotrace when building x86 kernels mmiotrace uses the ftrace framework for dynamic patching, so enabling it does not cause any performance impact. Having mmiotrace enabled is very useful for debugging nvidia / nouveau driver problems, as we often use mmiotraces for nouveau development / debugging. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-04 10:00:56 +00:00
* Tue Aug 04 2015 Hans de Goede <hdegoede@redhat.com>
- Always enable mmiotrace when building x86 kernels
Move joydev.ko from kernel-modules-extra to kernel-modules Unlike the other joystick modules joydev is not just needed for old analog joysticks, but also to provide /dev/js? devices with new usb connected joysticks. Many games still use the (old) /dev/js interface, and will not work ootb unless kernel-modules-extra is installed. Moving jodev.ko to the main kernel package fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-04 09:52:26 +00:00
* Tue Aug 04 2015 Hans de Goede <hdegoede@redhat.com>
- Move joydev.ko from kernel-modules-extra to kernel-modules
CVE-2015-5697 info leak in md driver (rhbz 1249011 1249013)
2015-08-04 00:20:41 +00:00
* Mon Aug 03 2015 Josh Boyer <jwboyer@fedoraproject.org>
Fix i386 boot bug correctly (rhbz 1247382)
2015-08-04 01:08:32 +00:00
- Fix i386 boot bug correctly (rhbz 1247382)
CVE-2015-5697 info leak in md driver (rhbz 1249011 1249013)
2015-08-04 00:20:41 +00:00
- CVE-2015-5697 info leak in md driver (rhbz 1249011 1249013)
Linux v4.2-rc5
2015-08-03 14:50:17 +00:00
* Mon Aug 03 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc5.git0.1
- Linux v4.2-rc5
Disable debugging options.
2015-08-03 12:57:53 +00:00
- Disable debugging options.
Revert upstream commit 1c220c69ce to fix i686 booting (rhbz 1247382)
2015-08-03 12:52:01 +00:00
* Mon Aug 03 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Revert upstream commit 1c220c69ce to fix i686 booting (rhbz 1247382)
Linux v4.2-rc4-111-g8400935737bf
2015-07-31 15:49:28 +00:00
* Fri Jul 31 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc4.git4.1
- Linux v4.2-rc4-111-g8400935737bf
Linux v4.2-rc4-87-g86ea07ca846a
2015-07-30 13:25:56 +00:00
* Thu Jul 30 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc4.git3.1
- Linux v4.2-rc4-87-g86ea07ca846a
Disable CRYPTO_DEV_VMX_ENCRYPT on PPC for now to fix Power 8 boot (rhbz 1237089)
2015-07-30 12:59:46 +00:00
* Thu Jul 30 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Disable CRYPTO_DEV_VMX_ENCRYPT on PPC for now to fix Power 8 boot (rhbz 1237089)
Linux v4.2-rc4-53-g956325bd55bb
2015-07-29 17:04:09 +00:00
* Wed Jul 29 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc4.git2.1
- Linux v4.2-rc4-53-g956325bd55bb
Drop acpi_brightness_enable revert patch https://lists.fedoraproject.org/pipermail/kernel/2015-July/005958.html
2015-07-29 15:24:48 +00:00
* Wed Jul 29 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Drop acpi_brightness_enable revert patch
Linux v4.2-rc4-44-g67eb890e5e13
2015-07-28 19:50:38 +00:00
* Tue Jul 28 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc4.git1.1
- Linux v4.2-rc4-44-g67eb890e5e13
Reenable debugging options.
2015-07-28 18:32:09 +00:00
- Reenable debugging options.
Linux v4.2-rc4 - Disable debugging options.
2015-07-27 14:35:37 +00:00
* Mon Jul 27 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc4.git0.1
- Linux v4.2-rc4
CVE-2015-1333 add_key memory leak (rhbz 1244171)
2015-07-27 14:44:28 +00:00
- CVE-2015-1333 add_key memory leak (rhbz 1244171)
Disable debugging options.
2015-07-27 11:45:45 +00:00
- Disable debugging options.
Linux v4.2-rc3-136-g45b4b782e848
2015-07-24 13:57:21 +00:00
* Fri Jul 24 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc3.git4.1
- Linux v4.2-rc3-136-g45b4b782e848
Linux v4.2-rc3-115-gc5dfd654d0ec
2015-07-23 18:26:48 +00:00
* Thu Jul 23 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc3.git3.1
- Linux v4.2-rc3-115-gc5dfd654d0ec
Linux v4.2-rc3-17-gd725e66c06ab
2015-07-22 14:08:06 +00:00
* Wed Jul 22 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc3.git2.1
- Linux v4.2-rc3-17-gd725e66c06ab
Linux v4.2-rc3-4-g9d634c410b07
2015-07-21 12:36:06 +00:00
* Tue Jul 21 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc3.git1.1
- Linux v4.2-rc3-4-g9d634c410b07
Reenable debugging options.
2015-07-21 11:46:06 +00:00
- Reenable debugging options.
Fix stmmac eth driver (AllWinner, other ARM, and other devices)
2015-07-21 10:11:21 +00:00
* Tue Jul 21 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Fix stmmac eth driver (AllWinner, other ARM, and other devices)
Linux v4.2-rc3
2015-07-20 15:17:52 +00:00
* Mon Jul 20 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc3.git0.1
- Linux v4.2-rc3
Linux v4.2-rc2-190-g21bdb584af8c
2015-07-17 19:34:45 +00:00
* Fri Jul 17 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc2.git2.1
- Linux v4.2-rc2-190-g21bdb584af8c
Enable DW MMC for generic ARM (hi6220 SoC support)
2015-07-17 09:48:13 +00:00
* Fri Jul 17 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable DW MMC for generic ARM (hi6220 SoC support)
Linux v4.2-rc2-77-gf760b87f8f12
2015-07-15 15:29:40 +00:00
* Wed Jul 15 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc2.git1.1
- Linux v4.2-rc2-77-gf760b87f8f12
Update AMD Seattle a0 eth driver for 4.2
2015-07-14 17:52:00 +00:00
* Tue Jul 14 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Update AMD Seattle a0 eth driver for 4.2
Linux v4.2-rc2 - Disable debugging options.
2015-07-13 14:53:53 +00:00
* Mon Jul 13 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc2.git0.1
- Linux v4.2-rc2
- Disable debugging options.
Linux v4.2-rc1-62-gc4b5fd3fb205 - Build perf with NO_PERF_READ_VDSO32 on all arches
2015-07-10 13:47:55 +00:00
* Fri Jul 10 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc1.git3.1
- Linux v4.2-rc1-62-gc4b5fd3fb205
- Build perf with NO_PERF_READ_VDSO32 on all arches
Use git to apply patches
2015-07-09 19:46:07 +00:00
* Thu Jul 09 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Use git to apply patches
Linux v4.2-rc1-33-gd6ac4ffc61ac
2015-07-08 14:30:06 +00:00
* Wed Jul 08 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc1.git2.1
- Linux v4.2-rc1-33-gd6ac4ffc61ac
* Tue Jul 07 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add kdbus
Linux v4.2-rc1-17-gc7e9ad7da219 - Reenable debugging options.
2015-07-07 14:55:05 +00:00
* Tue Jul 07 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc1.git1.1
- Linux v4.2-rc1-17-gc7e9ad7da219
- Reenable debugging options.
Linux v4.2-rc1 - Disable debug options. - Add patch to fix perf build
2015-07-06 20:34:35 +00:00
* Mon Jul 06 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc1.git0.1
- Linux v4.2-rc1
- Disable debug options.
- Add patch to fix perf build
* Thu Jul 2 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Move aarch64 relevant AMBA config options to arm-generic
- Minor ARMv7 updates
Linux v4.1-11549-g05a8256c586a
2015-07-01 16:11:35 +00:00
* Wed Jul 01 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc0.git4.1
- Linux v4.1-11549-g05a8256c586a
Linux v4.1-11355-g6aaf0da8728c - Add patch to fix KVM sleeping in atomic issue (rhbz 1237143) - Fix errant with_perf disable that removed perf entirely (rhbz 1237266)
2015-06-30 17:01:28 +00:00
* Tue Jun 30 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.2.0-0.rc0.git3.1
- Linux v4.1-11355-g6aaf0da8728c
- Add patch to fix KVM sleeping in atomic issue (rhbz 1237143)
- Fix errant with_perf disable that removed perf entirely (rhbz 1237266)
* Tue Jun 30 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor Aarch64 updates and cleanups
- Enable initial support for hi6220
Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options.
2015-06-29 15:24:25 +00:00
* Mon Jun 29 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git2.1
- Linux v4.1-11235-gc63f887bdae8
- Reenable debugging options.
Reorganisation and cleanup of the powerpc configs
2015-06-26 21:23:54 +00:00
* Fri Jun 26 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Reorganisation and cleanup of the powerpc configs
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
* Thu Jun 25 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Linux v4.1-5596-gaefbef10e3ae
Linux v4.1
2015-06-22 14:46:26 +00:00
* Mon Jun 22 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-1
- Linux v4.1
Add patch to fix touchpad issues on Razer machines (rhbz 1227891)
2015-06-18 23:00:58 +00:00
* Thu Jun 18 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add patch to fix touchpad issues on Razer machines (rhbz 1227891)
Bump for rebuild to hopefully fix size issues due to elfutils bug
2015-06-17 02:31:12 +00:00
* Tue Jun 16 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc8.git0.2
- Bump for rebuild to hopefully fix size issues due to elfutils bug
Make some of the ARMv7 cpufreq drivers modular
2015-06-16 19:51:36 +00:00
* Tue Jun 16 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Make some of the ARMv7 cpufreq drivers modular
Linux v4.1-rc8
2015-06-15 12:49:37 +00:00
* Mon Jun 15 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc8.git0.1
- Linux v4.1-rc8
Linux v4.1-rc7-72-gdf5f4158415b
2015-06-12 19:11:23 +00:00
* Fri Jun 12 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc7.git1.1
- Linux v4.1-rc7-72-gdf5f4158415b
CVE-2015-XXXX kvm: NULL ptr deref in kvm_apic_has_events (rhbz 1230770 1230774)
2015-06-12 14:15:55 +00:00
* Fri Jun 12 2015 Josh Boyer <jwboyer@fedoraproject.org>
- CVE-2015-XXXX kvm: NULL ptr deref in kvm_apic_has_events (rhbz 1230770 1230774)
Fix touchpad for Thinkpad S540 (rhbz 1223051)
2015-06-09 17:32:31 +00:00
* Tue Jun 09 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix touchpad for Thinkpad S540 (rhbz 1223051)
Linux v4.1-rc7
2015-06-08 14:16:55 +00:00
* Mon Jun 08 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc7.git0.1
- Linux v4.1-rc7
Linux v4.1-rc6-49-g8a7deb362b76
2015-06-04 11:49:14 +00:00
* Thu Jun 04 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc6.git2.1
- Linux v4.1-rc6-49-g8a7deb362b76
Add patch to turn of WC mmaps on i915 from airlied (rhbz 1226743)
2015-06-04 11:14:37 +00:00
* Thu Jun 04 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add patch to turn of WC mmaps on i915 from airlied (rhbz 1226743)
Drop firwmare warning until we get a real fix (rhbz 1133378)
2015-06-03 21:37:16 +00:00
* Wed Jun 03 2015 Laura Abbott <labbott@fedoraproject.org>
- Drop that blasted firwmare warning until we get a real fix (rhbz 1133378)
Fix auditing of canonical mode (rhbz 1188695)
2015-06-03 17:10:19 +00:00
* Wed Jun 03 2015 Laura Abbott <labbott@fedoraproject.org>
- Fix auditing of canonical mode (rhbz 1188695)
Fix from Ngo Than for perf build on ppc64le (rhbz 1227260)
2015-06-03 20:04:34 +00:00
* Wed Jun 03 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix from Ngo Than for perf build on ppc64le (rhbz 1227260)
Linux v4.1-rc6-44-g8cd9234c64c5
2015-06-03 12:37:20 +00:00
* Wed Jun 03 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc6.git1.1
- Linux v4.1-rc6-44-g8cd9234c64c5
Fix middle button issues on external Lenovo keyboards (rhbz 1225563)
2015-06-02 13:13:59 +00:00
* Tue Jun 02 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix middle button issues on external Lenovo keyboards (rhbz 1225563)
Linux v4.1-rc6
2015-06-01 13:53:57 +00:00
* Mon Jun 01 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc6.git0.1
- Linux v4.1-rc6
Add quirk for Mac Pro backlight (rhbz 1217249)
2015-05-28 17:37:50 +00:00
* Thu May 28 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add quirk for Mac Pro backlight (rhbz 1217249)
Linux v4.1-rc5 - Disable debugging options.
2015-05-25 14:32:01 +00:00
* Mon May 25 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc5.git0.1
- Linux v4.1-rc5
- Disable debugging options.
Linux v4.1-rc4-11-g1113cdfe7d2c - Reenable debugging options. - Add patch to fix discard on md RAID0 (rhbz 1223332)
2015-05-21 12:35:34 +00:00
* Thu May 21 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc4.git1.1
- Linux v4.1-rc4-11-g1113cdfe7d2c
- Reenable debugging options.
- Add patch to fix discard on md RAID0 (rhbz 1223332)
Linux v4.1-rc4 - Disable debugging options.
2015-05-18 19:27:09 +00:00
* Mon May 18 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc4.git0.1
- Linux v4.1-rc4
- Disable debugging options.
Fix DVB oops (rhbz 1220118)
2015-05-18 17:15:55 +00:00
* Mon May 18 2015 Josh Boyer <jwboyer@fedoraproject.org>
Fix incorrect bandwidth on some Chicony webcams - Fix DVB oops (rhbz 1220118)
2015-05-18 17:17:08 +00:00
- Fix incorrect bandwidth on some Chicony webcams
Fix DVB oops (rhbz 1220118)
2015-05-18 17:15:55 +00:00
- Fix DVB oops (rhbz 1220118)
Linux v4.1-rc3-346-gc0655fe9b090 - Enable in-kernel vmmouse driver (rhbz 1214474)
2015-05-18 14:03:18 +00:00
* Mon May 18 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc3.git4.1
- Linux v4.1-rc3-346-gc0655fe9b090
- Enable in-kernel vmmouse driver (rhbz 1214474)
Linux v4.1-rc3-177-gf0897f4cc0fc
2015-05-15 13:17:22 +00:00
* Fri May 15 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc3.git3.1
- Linux v4.1-rc3-177-gf0897f4cc0fc
Fix non-empty dir removal in overlayfs (rhbz 1220915)
2015-05-14 12:20:07 +00:00
* Thu May 14 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix non-empty dir removal in overlayfs (rhbz 1220915)
Fix spew from KVM switch (rhbz 1219343)
2015-05-13 17:53:25 +00:00
* Wed May 13 2015 Laura Abbott <labbott@fedoraproject.org>
- Fix spew from KVM switch (rhbz 1219343)
Linux v4.1-rc3-165-g110bc76729d4
2015-05-13 14:43:35 +00:00
* Wed May 13 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc3.git2.1
- Linux v4.1-rc3-165-g110bc76729d4
Linux v4.1-rc3-46-g4cfceaf0c087 - Reenable debugging options.
2015-05-12 15:50:58 +00:00
* Tue May 12 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc3.git1.1
- Linux v4.1-rc3-46-g4cfceaf0c087
- Reenable debugging options.
Linux v4.1-rc3 - Disable debugging options.
2015-05-11 12:27:28 +00:00
* Mon May 11 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc3.git0.1
- Linux v4.1-rc3
- Disable debugging options.
Add note in rpm changelog for /boot kernel-install changes
2015-05-11 14:25:29 +00:00
- Use kernel-install to create files in /boot partition (from Harald Hoyer)
Linux v4.1-rc3 - Disable debugging options.
2015-05-11 12:27:28 +00:00
Minor ARM update
2015-05-11 09:34:12 +00:00
* Mon May 11 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor ARM update
Linux v4.1-rc2-79-g0e1dc4274828
2015-05-07 13:22:36 +00:00
* Thu May 07 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc2.git3.1
- Linux v4.1-rc2-79-g0e1dc4274828
Linux v4.1-rc2-37-g5198b44374ad
2015-05-06 13:47:10 +00:00
* Wed May 06 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc2.git2.1
- Linux v4.1-rc2-37-g5198b44374ad
Linux v4.1-rc2-7-gd9cee5d4f66e - Reenable debugging options.
2015-05-05 20:13:11 +00:00
* Tue May 05 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc2.git1.1
- Linux v4.1-rc2-7-gd9cee5d4f66e
- Reenable debugging options.
Backport patch to blacklist TRIM on all Samsung 8xx series SSDs (rhbz 1218662)
2015-05-05 13:59:22 +00:00
* Tue May 05 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Backport patch to blacklist TRIM on all Samsung 8xx series SSDs (rhbz 1218662)
Linux v4.1-rc2 - Disable debugging options.
2015-05-04 14:12:29 +00:00
* Mon May 04 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc2.git0.1
- Linux v4.1-rc2
- Disable debugging options.
Enable ACPI on aarch64 (add minor patch to disable EXPERT requirement so we don't pull all those options in too)
2015-05-03 17:35:23 +00:00
* Sun May 3 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable ACPI on aarch64
General ARMv7 updates
2015-05-04 08:06:32 +00:00
- General ARMv7 updates
Enable ACPI on aarch64 (add minor patch to disable EXPERT requirement so we don't pull all those options in too)
2015-05-03 17:35:23 +00:00
Linux v4.1-rc1-117-g4a152c3913fb - Reenable debugging options.
2015-05-01 13:00:22 +00:00
* Fri May 01 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc1.git1.1
- Linux v4.1-rc1-117-g4a152c3913fb
- Reenable debugging options.
Fix up boot times for live images (rhbz 1210857)
2015-04-28 18:00:58 +00:00
* Tue Apr 28 2015 Justin M. Forbes <jforbes@fedoraproject.org>
- Fix up boot times for live images (rhbz 1210857)
Linux v4.1-rc1 - Disable debugging options. Fixup a couple of small spots left over from the 3.x->4.x major version change
2015-04-27 14:08:55 +00:00
* Mon Apr 27 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc1.git0.1
- Linux v4.1-rc1
- Disable debugging options.
Linux v4.0-10976-gd56a669ca59c
2015-04-24 18:12:03 +00:00
* Fri Apr 24 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git14.1
- Linux v4.0-10976-gd56a669ca59c
Fix iscsi with QNAP devices (rhbz 1208999)
2015-04-24 13:47:26 +00:00
* Fri Apr 24 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix iscsi with QNAP devices (rhbz 1208999)
Linux v4.0-10710-g27cf3a16b253
2015-04-23 14:16:39 +00:00
* Thu Apr 23 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git13.1
- Linux v4.0-10710-g27cf3a16b253
Update AMD xgbe a0 aarch64 driver for 4.1
2015-04-22 21:45:54 +00:00
* Wed Apr 22 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Update AMD xgbe a0 aarch64 driver for 4.1
Upload git12 patch move build NVR to latest commit
2015-04-22 14:52:11 +00:00
* Wed Apr 22 2015 Peter Robinson <pbrobinson@fedoraproject.org> - 4.1.0-0.rc0.git12.1
Inital ARM updates for 4.1, Temporarily disable AMD ARM64 xgbe-a0 driver
2015-04-22 14:51:31 +00:00
- Inital ARM updates for 4.1
- Temporarily disable AMD ARM64 xgbe-a0 driver
Upload git12 patch move build NVR to latest commit
2015-04-22 14:52:11 +00:00
* Wed Apr 22 2015 Josh Boyer <jwboyer@fedoraproject.org>
Linux v4.0-9804-gdb4fd9c5d072
2015-04-22 14:16:54 +00:00
- Linux v4.0-9804-gdb4fd9c5d072
Linux v4.0-9362-g1fc149933fd4
2015-04-21 18:48:42 +00:00
* Tue Apr 21 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git11.1
- Linux v4.0-9362-g1fc149933fd4
Enable ECHO driver (rhbz 749884)
2015-04-21 13:05:07 +00:00
* Tue Apr 21 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Enable ECHO driver (rhbz 749884)
Linux v4.0-8962-g14aa02449064 DRM merge
2015-04-21 00:36:25 +00:00
* Mon Apr 20 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git10.1
- Linux v4.0-8962-g14aa02449064
- DRM merge
Enable mvebu on the lpae kernel It has LPAE, there are boards that can have more than 4GiB ram. Anaconda defaults to installing LPAE when the hardware supports it, so any install today will not work post install. Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2015-04-19 00:20:23 +00:00
* Mon Apr 20 2015 Dennis Gilmore <dennis@ausil.us>
- enable mvebu for the LPAE kernel
Linux v4.0-8158-g09d51602cf84
2015-04-20 12:58:25 +00:00
* Mon Apr 20 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git9.1
- Linux v4.0-8158-g09d51602cf84
Linux v4.0-7945-g7505256626b0
2015-04-18 14:28:40 +00:00
* Sat Apr 18 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git8.1
- Linux v4.0-7945-g7505256626b0
Linux v4.0-7300-g4fc8adcfec3d - Patch from Benjamin Tissoires to fix 3 finger tap on synaptics (rhbz 1212230) - Add patch to support touchpad on Google Pixel 2 (rhbz 1209088)
2015-04-17 13:31:16 +00:00
* Fri Apr 17 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git7.1
- Linux v4.0-7300-g4fc8adcfec3d
- Patch from Benjamin Tissoires to fix 3 finger tap on synaptics (rhbz 1212230)
- Add patch to support touchpad on Google Pixel 2 (rhbz 1209088)
Linux v4.0-7209-g7d69cff26cea
2015-04-17 12:33:28 +00:00
* Fri Apr 17 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git6.1
- Linux v4.0-7209-g7d69cff26cea
Linux v4.0-7084-g497a5df7bf6f
2015-04-16 20:29:34 +00:00
* Thu Apr 16 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git5.1
- Linux v4.0-7084-g497a5df7bf6f
Linux v4.0-6817-geea3a00264cf
2015-04-16 14:55:18 +00:00
* Thu Apr 16 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git4.1
- Linux v4.0-6817-geea3a00264cf
Linux v4.0-5833-g6c373ca89399
2015-04-15 19:51:31 +00:00
* Wed Apr 15 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git3.1
- Linux v4.0-5833-g6c373ca89399
Linux v4.0-3843-gbb0fd7ab0986
2015-04-15 14:47:18 +00:00
* Wed Apr 15 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git2.1
- Linux v4.0-3843-gbb0fd7ab0986
Linux v4.0-2620-gb79013b2449c
2015-04-14 13:54:01 +00:00
* Tue Apr 14 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.1.0-0.rc0.git1.1
- Linux v4.0-2620-gb79013b2449c
- Reenable debugging options.
Linux v4.0
2015-04-13 09:37:18 +00:00
* Sun Apr 12 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-1
- Linux v4.0
Linux v4.0-rc7-42-ge5e02de0665e
2015-04-10 14:58:53 +00:00
* Fri Apr 10 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc7.git2.1
- Linux v4.0-rc7-42-ge5e02de0665e
Linux v4.0-rc7-30-g20624d17963c
2015-04-09 14:00:06 +00:00
* Thu Apr 09 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc7.git1.1
- Linux v4.0-rc7-30-g20624d17963c
Linux v4.0-rc6-101-g0a4812798fae
2015-04-02 20:46:55 +00:00
* Thu Apr 02 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc6.git2.1
- Linux v4.0-rc6-101-g0a4812798fae
DoS against IPv6 stacks due to improper handling of RA (rhbz 1203712 1208491)
2015-04-02 12:23:52 +00:00
* Thu Apr 02 2015 Josh Boyer <jwboyer@fedoraproject.org>
- DoS against IPv6 stacks due to improper handling of RA (rhbz 1203712 1208491)
Linux v4.0-rc6-31-gd4039314d0b1 - CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397)
2015-04-02 00:24:22 +00:00
* Wed Apr 01 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc6.git1.1
- Linux v4.0-rc6-31-gd4039314d0b1
CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397) Part deux: Fix it harder
2015-04-01 12:38:46 +00:00
- CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397)
Enable MLX4_EN_VXLAN (rhbz 1207728)
2015-03-31 15:13:59 +00:00
* Tue Mar 31 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Enable MLX4_EN_VXLAN (rhbz 1207728)
Linux v4.0-rc6
2015-03-30 13:07:13 +00:00
* Mon Mar 30 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc6.git0.1
- Linux v4.0-rc6
Linux v4.0-rc5-96-g3c435c1e472b - Fixes hangs due to i915 issues (rhbz 1204050 1206056)
2015-03-27 13:22:16 +00:00
* Fri Mar 27 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc5.git4.1
- Linux v4.0-rc5-96-g3c435c1e472b
- Fixes hangs due to i915 issues (rhbz 1204050 1206056)
Linux v4.0-rc5-80-g4c4fe4c24782
2015-03-26 13:21:41 +00:00
* Thu Mar 26 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc5.git3.1
- Linux v4.0-rc5-80-g4c4fe4c24782
Add aarch64 patches to fix mustang usb, seattle eth, and console settings
2015-03-26 01:14:45 +00:00
* Wed Mar 25 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Add aarch64 patches to fix mustang usb, seattle eth, and console settings
Add patches to fix a few more i915 hangs/oopses
2015-03-25 21:36:04 +00:00
* Wed Mar 25 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc5.git2.4
- Add patches to fix a few more i915 hangs/oopses
Linux v4.0-rc5-53-gc875f421097a
2015-03-25 17:09:36 +00:00
* Wed Mar 25 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc5.git2.1
- Linux v4.0-rc5-53-gc875f421097a
Fix ALPS v5 and v7 trackpads (rhbz 1203584)
2015-03-24 16:33:03 +00:00
* Tue Mar 24 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix ALPS v5 and v7 trackpads (rhbz 1203584)
Linux v4.0-rc5-25-g90a5a895cc8b - Add some i915 fixes
2015-03-24 16:13:00 +00:00
* Tue Mar 24 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc5.git1.3
- Linux v4.0-rc5-25-g90a5a895cc8b
- Add some i915 fixes
Validate iovec range in sys_sendto/sys_recvfrom
2015-03-23 19:09:12 +00:00
* Mon Mar 23 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc5.git0.3
Enable CONFIG_SND_BEBOB (rhbz 1204342)
2015-03-23 19:16:31 +00:00
- Enable CONFIG_SND_BEBOB (rhbz 1204342)
Validate iovec range in sys_sendto/sys_recvfrom
2015-03-23 19:09:12 +00:00
- Validate iovec range in sys_sendto/sys_recvfrom
Revert i915 commit that causes boot hangs on at least some headless machines
2015-03-23 19:07:28 +00:00
- Revert i915 commit that causes boot hangs on at least some headless machines
Linux v4.0-rc5
2015-03-23 19:05:09 +00:00
- Linux v4.0-rc5
Linux v4.0-rc4-199-gb314acaccd7e
2015-03-20 15:28:46 +00:00
* Fri Mar 20 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc4.git2.1
- Linux v4.0-rc4-199-gb314acaccd7e
Fix brightness on Lenovo Ideapad Z570 (rhbz 1187004)
2015-03-20 15:35:15 +00:00
- Fix brightness on Lenovo Ideapad Z570 (rhbz 1187004)
Linux v4.0-rc4-199-gb314acaccd7e
2015-03-20 15:28:46 +00:00
Linux v4.0-rc4-88-g7b09ac704bac - Rename arm64-xgbe-a0.patch
2015-03-19 20:01:37 +00:00
* Thu Mar 19 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc4.git1.3
- Linux v4.0-rc4-88-g7b09ac704bac
- Rename arm64-xgbe-a0.patch
Drop the big arm64 patch, just pull in the specific patches we need to fix specific problems
2015-03-19 18:16:51 +00:00
* Thu Mar 19 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Drop arm64 non upstream patch
Add patch to fix high cpu usage on direct_read kernfs files (rhbz 1202362)
2015-03-19 13:11:13 +00:00
* Thu Mar 19 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add patch to fix high cpu usage on direct_read kernfs files (rhbz 1202362)
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
* Wed Mar 18 2015 Jarod Wilson <jwilson@fedoraproject.org>
- Fix kernel-uname-r Requires/Provides variant mismatches
enable PCI_ECAM
2015-03-17 15:35:38 +00:00
* Tue Mar 17 2015 Kyle McMartin <kmcmarti@redhat.com> - 4.0.0-0.rc4.git0.3
update kernel-arm64.patch, move EDAC to arm-generic, add EDAC_XGENE on arm64
2015-03-17 15:10:15 +00:00
- Update kernel-arm64.patch, move EDAC to arm-generic, add EDAC_XGENE on arm64.
enable PCI_ECAM
2015-03-17 15:35:38 +00:00
- Add PCI_ECAM on generic, since it'll be selected most places anyway.
update kernel-arm64.patch, move EDAC to arm-generic, add EDAC_XGENE on arm64
2015-03-17 15:10:15 +00:00
Fix bad variant usage in kernel dependencies This was resulting in a variant build with dependencies like so: error: Failed dependencies: kernel--vanilla-core-uname-r = ... The variant already has a - at the start of it, so the always-there one should be after variant and variant will provide the one between kernel and itself. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-17 13:12:56 +00:00
* Mon Mar 16 2015 Jarod Wilson <jwilson@fedoraproject.org>
- Fix bad variant usage in kernel dependencies
Linux v4.0-rc4 - Drop arm64 RCU revert patch. Should be fixed properly upstream now. - Disable debugging options.
2015-03-16 14:07:00 +00:00
* Mon Mar 16 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc4.git0.1
- Linux v4.0-rc4
- Drop arm64 RCU revert patch. Should be fixed properly upstream now.
- Disable debugging options.
Fix kernel-tools sub-packages for variant builds If you try rebuilding with a %variant set, you'll hit: error: line 2026: Package does not exist: %post -n kernel-tools In the %post defs, we had '%post -n kernel-tools', while the package was named simply '%package tools', which for the base kernel build, meant they worked out to the same thing, but if doing say a kernel-vanilla build, you had kernel-vanilla-tools and kernel-tools mismatching. This fixes the inconsistency. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-15 06:02:19 +00:00
* Sun Mar 15 2015 Jarod Wilson <jwilson@fedoraproject.org>
- Fix kernel-tools sub-packages for variant builds
Fix esrt build on aarch64 Tested via cross build with: [jwboyer@vader linux]$ aarch64-linux-gnu-gcc --version aarch64-linux-gnu-gcc (GCC) 4.9.1 20140717 (Red Hat Cross 4.9.1-1)
2015-03-13 19:25:57 +00:00
* Fri Mar 13 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Fix esrt build on aarch64
arm64-revert-tlb-rcu_table_free.patch: revert 5e5f6dc1 which causes lockups on arm64 machines.
2015-03-13 16:38:27 +00:00
* Fri Mar 13 2015 Kyle McMartin <kyle@fedoraproject.org>
- arm64-revert-tlb-rcu_table_free.patch: revert 5e5f6dc1 which
causes lockups on arm64 machines.
revert ESRT on AArch64 for now
2015-03-13 16:57:01 +00:00
- Also revert ESRT on AArch64 for now.
arm64-revert-tlb-rcu_table_free.patch: revert 5e5f6dc1 which causes lockups on arm64 machines.
2015-03-13 16:38:27 +00:00
Linux v4.0-rc3-148-gc202baf017ae
2015-03-13 12:26:48 +00:00
* Fri Mar 13 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc3.git2.1
- Linux v4.0-rc3-148-gc202baf017ae
Add patch to support clickpads (rhbz 1201532)
2015-03-13 13:47:10 +00:00
- Add patch to support clickpads (rhbz 1201532)
Linux v4.0-rc3-148-gc202baf017ae
2015-03-13 12:26:48 +00:00
CVE-2014-8159 infiniband: uverbs: unprotected physical memory access (rhbz 1181166 1200950)
2015-03-12 12:47:38 +00:00
* Thu Mar 12 2015 Josh Boyer <jwboyer@fedoraproject.org>
- CVE-2014-8159 infiniband: uverbs: unprotected physical memory access (rhbz 1181166 1200950)
Linux v4.0-rc3-111-gaffb8172de39 - Reenable debugging options.
2015-03-11 12:48:06 +00:00
* Wed Mar 11 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc3.git1.1
- Linux v4.0-rc3-111-gaffb8172de39
CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397)
2015-03-11 14:19:12 +00:00
- CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397)
Patch series to fix Lenovo *40 and Carbon X1 touchpads (rhbz 1200777 1200778)
2015-03-11 13:17:47 +00:00
- Patch series to fix Lenovo *40 and Carbon X1 touchpads (rhbz 1200777 1200778)
Revert commit that added bad rpath to cpupower (rhbz 1199312)
2015-03-11 12:51:00 +00:00
- Revert commit that added bad rpath to cpupower (rhbz 1199312)
Linux v4.0-rc3-111-gaffb8172de39 - Reenable debugging options.
2015-03-11 12:48:06 +00:00
- Reenable debugging options.
Linux v4.0-rc3 - Disable debugging options.
2015-03-09 13:12:49 +00:00
* Mon Mar 09 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc3.git0.1
- Linux v4.0-rc3
- Disable debugging options.
ARMv7: add patches to fix crash on boot for some devices on multiplatform
2015-03-08 23:50:13 +00:00
* Sun Mar 8 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- ARMv7: add patches to fix crash on boot for some devices on multiplatform
Linux v4.0-rc2-255-g5f237425f352
2015-03-06 20:18:56 +00:00
* Fri Mar 06 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc2.git2.1
- Linux v4.0-rc2-255-g5f237425f352
Linux v4.0-rc2-150-g6587457b4b3d - Reenable debugging options.
2015-03-05 14:30:32 +00:00
* Thu Mar 05 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc2.git1.1
- Linux v4.0-rc2-150-g6587457b4b3d
- Reenable debugging options.
Enable MLX4_EN on ppc64/aarch64 (rhbz 1198719)
2015-03-04 18:14:15 +00:00
* Wed Mar 04 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Enable MLX4_EN on ppc64/aarch64 (rhbz 1198719)
Linux v4.0-rc2 - Enable CONFIG_CM32181 for ALS on Carbon X1 - Disable debugging options.
2015-03-03 20:52:27 +00:00
* Tue Mar 03 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc2.git0.1
- Linux v4.0-rc2
- Enable CONFIG_CM32181 for ALS on Carbon X1
- Disable debugging options.
Linux v4.0-rc1-178-g023a6007a08d
2015-03-03 14:00:03 +00:00
* Tue Mar 03 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc1.git3.1
- Linux v4.0-rc1-178-g023a6007a08d
Enable YAMA (rhbz 1196825)
2015-03-02 15:14:15 +00:00
* Mon Mar 02 2015 Josh Boyer <jwboyer@fedoraproject.org>
Add patch to fix nfsd soft lockup (rhbz 1185519)
2015-03-02 19:17:35 +00:00
- Add patch to fix nfsd soft lockup (rhbz 1185519)
Enable ET131X driver (rhbz 1197842)
2015-03-02 19:00:29 +00:00
- Enable ET131X driver (rhbz 1197842)
Enable YAMA (rhbz 1196825)
2015-03-02 15:14:15 +00:00
- Enable YAMA (rhbz 1196825)
ARMv7 OMAP updates, fix panda boot
2015-02-28 18:55:52 +00:00
* Sat Feb 28 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- ARMv7 OMAP updates, fix panda boot
Linux v4.0-rc1-36-g4f671fe2f952
2015-02-27 13:23:12 +00:00
* Fri Feb 27 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc1.git2.1
- Linux v4.0-rc1-36-g4f671fe2f952
Add support for AR5B195 devices from Alexander Ploumistos (rhbz 1190947)
2015-02-25 20:32:01 +00:00
* Wed Feb 25 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add support for AR5B195 devices from Alexander Ploumistos (rhbz 1190947)
Linux v4.0-rc1-22-gb24e2bdde4af - Reenable debugging options. Fixup one more 3.x place and make sure we don't apply the -rcX patch in yet another spot.
2015-02-24 22:49:34 +00:00
* Tue Feb 24 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc1.git1.1
- Linux v4.0-rc1-22-gb24e2bdde4af
- Reenable debugging options.
Add patch to fix aarch64 KVM bug with module loading (rhbz 1194366).
2015-02-24 18:25:10 +00:00
* Tue Feb 24 2015 Richard W.M. Jones <rjones@redhat.com> - 4.0.0-0.rc1.git0.2
- Add patch to fix aarch64 KVM bug with module loading (rhbz 1194366).
Minor ARM config update
2015-02-24 12:51:16 +00:00
* Tue Feb 24 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor ARM config update
Missed a hack We're using the -rcX tarballs, so we don't need to apply the patch-4.0-rcX patch. It wasn't actually being applied, but the SRPM rebuild in koji fails because we list it as Patch00 and it doesn't exist.
2015-02-23 20:43:04 +00:00
* Mon Feb 23 2015 Josh Boyer <jwboyer@fedoraproject.org> - 4.0.0-0.rc1.git0.1
Add patch for HID i2c from Seth Forshee (rhbz 1188439)
2015-02-23 20:08:16 +00:00
- Add patch for HID i2c from Seth Forshee (rhbz 1188439)
Missed a hack We're using the -rcX tarballs, so we don't need to apply the patch-4.0-rcX patch. It wasn't actually being applied, but the SRPM rebuild in koji fails because we list it as Patch00 and it doesn't exist.
2015-02-23 20:43:04 +00:00
* Mon Feb 23 2015 Josh Boyer <jwboyer@fedoraproject.org>
Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. Yay for major version bumps :\. We grab the full rc1 tarball instead of just the patch to make this way less messy in the spec. When 4.0 final is released, we'll need to undo a few specific hacks. Namely, we need to redefine: upstream_sublevel kversion Source0 back to the standard definitions. Thanks to Kyle for figuring this out 3 years ago.
2015-02-23 16:30:18 +00:00
- Linux v4.0-rc1
- CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178)
- Disable debugging options.
Linux v3.19-8975-g3d883483dc0a - Add patch to fix intermittent hangs in nouveau driver - Move mtpspi and related mods to kernel-core for VMWare guests (rhbz 1194612)
2015-02-20 14:32:10 +00:00
* Fri Feb 20 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git10.1
- Linux v3.19-8975-g3d883483dc0a
- Add patch to fix intermittent hangs in nouveau driver
- Move mtpspi and related mods to kernel-core for VMWare guests (rhbz 1194612)
Linux v3.19-8784-gb2b89ebfc0f0
2015-02-18 21:50:20 +00:00
* Wed Feb 18 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git9.1
- Linux v3.19-8784-gb2b89ebfc0f0
fixes to arm64
2015-02-18 20:38:08 +00:00
* Wed Feb 18 2015 Kyle McMartin <kyle@fedoraproject.org> - 3.20.0-0.rc0.git8.2
- kernel-arm64.patch: Revert dropping some of the xgene fixes we carried
against upstream. (#1193875)
- kernel-arm64-fix-psci-when-pg.patch: make it simpler.
- config-arm64: turn on CONFIG_DEBUG_SECTION_MISMATCH.
Linux v3.19-8217-gcc4f9c2a91b7
2015-02-18 16:53:33 +00:00
* Wed Feb 18 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git8.1
- Linux v3.19-8217-gcc4f9c2a91b7
turn on %aarch64patches
2015-02-17 19:16:28 +00:00
* Tue Feb 17 2015 Kyle McMartin <kyle@fedoraproject.org> - 3.20.0-0.rc0.git7.3
- kernel-arm64.patch turned on.
fix build on aarch64 with gcc5
2015-02-17 18:36:20 +00:00
* Tue Feb 17 2015 Kyle McMartin <kyle@fedoraproject.org> - 3.20.0-0.rc0.git7.2
- kernel-arm64.patch merge, but leave it off.
- kernel-arm64-fix-psci-when-pg.patch: when -pg (because of ftrace) is enabled
we must explicitly annotate which registers should be assigned, otherwise
gcc will do unexpected things behind our backs.
Linux v3.19-7478-g796e1c55717e - DRM merge
2015-02-17 15:18:24 +00:00
* Tue Feb 17 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git7.1
- Linux v3.19-7478-g796e1c55717e
- DRM merge
CVE-2015-1593 stack ASLR integer overflow (rhbz 1192519 1192520)
2015-02-16 19:13:37 +00:00
* Mon Feb 16 2015 Josh Boyer <jwboyer@fedoraproject.org>
CVE-XXXX-XXXX potential memory corruption in vhost/scsi driver (rhbz 1189864 1192079)
2015-02-16 19:32:42 +00:00
- CVE-XXXX-XXXX potential memory corruption in vhost/scsi driver (rhbz 1189864 1192079)
CVE-2015-1593 stack ASLR integer overflow (rhbz 1192519 1192520)
2015-02-16 19:13:37 +00:00
- CVE-2015-1593 stack ASLR integer overflow (rhbz 1192519 1192520)
Minor updates for ARMv7/ARM64
2015-02-16 17:00:49 +00:00
* Mon Feb 16 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor updates for ARMv7/ARM64
Linux v3.19-6676-g1fa185ebcbce
2015-02-16 15:01:09 +00:00
* Mon Feb 16 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git6.1
- Linux v3.19-6676-g1fa185ebcbce
Linux v3.19-5015-gc7d7b9867155
2015-02-13 16:00:04 +00:00
* Fri Feb 13 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git5.1
- Linux v3.19-5015-gc7d7b9867155
Linux v3.19-4542-g8cc748aa76c9
2015-02-12 17:53:25 +00:00
* Thu Feb 12 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git4.1
- Linux v3.19-4542-g8cc748aa76c9
Linux v3.19-4020-gce01e871a1d4
2015-02-12 15:14:32 +00:00
* Thu Feb 12 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git3.1
- Linux v3.19-4020-gce01e871a1d4
Linux v3.19-2595-gc5ce28df0e7c
2015-02-11 20:11:34 +00:00
* Wed Feb 11 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git2.1
- Linux v3.19-2595-gc5ce28df0e7c
Linux v3.19-463-g3e8c04eb1174 - Reenable debugging options. - Temporarily disable aarch64 patches
2015-02-11 14:17:16 +00:00
* Wed Feb 11 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.20.0-0.rc0.git1.1
- Linux v3.19-463-g3e8c04eb1174
- Reenable debugging options.
- Temporarily disable aarch64 patches
Linux v3.19
2015-02-09 08:19:47 +00:00
* Mon Feb 09 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-1
- Linux v3.19
Linux v3.19-rc7-189-g26cdd1f76a88
2015-02-07 08:01:35 +00:00
* Sat Feb 07 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc7.git3.1
- Linux v3.19-rc7-189-g26cdd1f76a88
Move ARM usb platform options to arm-generic
2015-02-05 11:35:59 +00:00
* Thu Feb 5 2015 Peter Robinson <pbrobinson@fedoraproject.org>
Allwinner A23 (sun8i) SoC
2015-02-05 11:39:39 +00:00
- Allwinner A23 (sun8i) SoC
Move ARM usb platform options to arm-generic
2015-02-05 11:35:59 +00:00
- Move ARM usb platform options to arm-generic
Linux v3.19-rc7-32-g5ee0e962603e
2015-02-05 09:32:52 +00:00
* Thu Feb 05 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc7.git2.1
- Linux v3.19-rc7-32-g5ee0e962603e
Linux v3.19-rc7-22-gdc6d6844111d
2015-02-04 14:52:11 +00:00
* Wed Feb 04 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc7.git1.1
- Linux v3.19-rc7-22-gdc6d6844111d
Bump baserelease for build
2015-02-03 19:19:26 +00:00
* Tue Feb 03 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc7.git0.3
Add patch to fix NFS backtrace (rhbz 1188638)
2015-02-03 17:44:50 +00:00
- Add patch to fix NFS backtrace (rhbz 1188638)
Linux v3.19-rc7 - Disable debugging options.
2015-02-02 14:49:50 +00:00
* Mon Feb 02 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc7.git0.1
- Linux v3.19-rc7
- Disable debugging options.
Linux v3.19-rc6-142-g1c999c47a9f1
2015-01-30 14:32:41 +00:00
* Fri Jan 30 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc6.git3.1
- Linux v3.19-rc6-142-g1c999c47a9f1
Backport patch from Rob Clark to toggle i915 state machine checks
2015-01-29 16:35:47 +00:00
* Thu Jan 29 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Backport patch from Rob Clark to toggle i915 state machine checks
- More ARMv7 updates - A few more sound config cleanups
2015-01-29 11:52:55 +00:00
* Thu Jan 29 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- More ARMv7 updates
- A few more sound config cleanups
Linux v3.19-rc6-105-gc59c961ca511
2015-01-28 17:18:14 +00:00
* Wed Jan 28 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc6.git2.1
- Linux v3.19-rc6-105-gc59c961ca511
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
* Tue Jan 27 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Enable SND_SOC and the button array driver on x86 for Baytrail devices
Linux v3.19-rc6-21-g4adca1cbc4ce - Reenable debugging options.
2015-01-27 16:46:16 +00:00
* Tue Jan 27 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc6.git1.1
- Linux v3.19-rc6-21-g4adca1cbc4ce
- Reenable debugging options.
Linux v3.19-rc6 - Disable debugging options.
2015-01-26 15:23:42 +00:00
* Mon Jan 26 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc6.git0.1
- Linux v3.19-rc6
Fix 3.19-rc6 builds with patch-2.7.3 Upstream patch decided that relative symlinks are dangerous to create via patch, so it refuses to do so. To get the kernel to build, we remove the hunk in patch-3.19-rc6.xz that was attempting to create one, and do it manually in the spec file. The spec change should go away when 3.19 final is out.
2015-01-26 21:10:22 +00:00
- Remove symbolic link hunk from patch-3.19-rc6 (rbhz 1185928)
Linux v3.19-rc6 - Disable debugging options.
2015-01-26 15:23:42 +00:00
- Disable debugging options.
Linux v3.19-rc5-134-gf8de05ca38b7
2015-01-22 20:42:47 +00:00
* Thu Jan 22 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc5.git2.1
- Linux v3.19-rc5-134-gf8de05ca38b7
Linux v3.19-rc5-117-g5eb11d6b3f55 - Reenable debugging options.
2015-01-21 14:50:33 +00:00
* Wed Jan 21 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc5.git1.1
- Linux v3.19-rc5-117-g5eb11d6b3f55
- Reenable debugging options.
More ARM config option cleanups
2015-01-20 14:24:04 +00:00
* Tue Jan 20 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- More ARM config option cleanups
Linux v3.19-rc5 - Disable debugging options.
2015-01-19 14:36:16 +00:00
* Mon Jan 19 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc5.git0.1
- Linux v3.19-rc5
- Disable debugging options.
- Move Rockchip to ARMv7 generic to support rk32xx on LPAE - Enable Device Tree Overlays for dynamic DTB - ARM config updates
2015-01-19 09:58:16 +00:00
* Sat Jan 17 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Move Rockchip to ARMv7 generic to support rk32xx on LPAE
- Enable Device Tree Overlays for dynamic DTB
- ARM config updates
Linux v3.19-rc4-155-gcb59670870d9
2015-01-16 19:39:40 +00:00
* Fri Jan 16 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc4.git4.1
- Linux v3.19-rc4-155-gcb59670870d9
Re-enable BUILD_DOCSRC
2015-01-15 18:41:30 +00:00
* Thu Jan 15 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Re-enable BUILD_DOCSRC
Linux v3.19-rc4-141-gf800c25b7a76
2015-01-15 14:39:29 +00:00
* Thu Jan 15 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc4.git3.1
- Linux v3.19-rc4-141-gf800c25b7a76
Linux v3.19-rc4-46-g188c901941ef - Enable I40E_VXLAN (rhbz 1182116)
2015-01-14 14:56:19 +00:00
* Wed Jan 14 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc4.git2.1
- Linux v3.19-rc4-46-g188c901941ef
- Enable I40E_VXLAN (rhbz 1182116)
Enable Checkpoint/Restore on ARMv7 (rhbz 1146995)
2015-01-14 02:52:59 +00:00
* Tue Jan 13 2015 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable Checkpoint/Restore on ARMv7 (rhbz 1146995)
Add installonlypkg(kernel) to kernel-devel subpackages (rhbz 1079906)
2015-01-13 19:36:20 +00:00
* Tue Jan 13 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Add installonlypkg(kernel) to kernel-devel subpackages (rhbz 1079906)
Linux v3.19-rc4-23-g971780b70194 - Reenable debugging options.
2015-01-13 14:43:21 +00:00
* Tue Jan 13 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc4.git1.1
- Linux v3.19-rc4-23-g971780b70194
- Reenable debugging options.
Linux v3.19-rc4 - Disable debugging options.
2015-01-12 16:36:21 +00:00
* Mon Jan 12 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc4.git0.1
- Linux v3.19-rc4
- Disable debugging options.
Add patch to fix loop in VDSO (rhbz 1178975)
2015-01-12 13:17:01 +00:00
* Mon Jan 12 2015 Josh Boyer <jwboyer@fedoraproject.org>
Backlight fixes for Samsung and Dell machines (rhbz 1094948 1115713)
2015-01-12 14:09:01 +00:00
- Backlight fixes for Samsung and Dell machines (rhbz 1094948 1115713)
Add various UAS quirks (rhbz 1124119)
2015-01-12 13:50:48 +00:00
- Add various UAS quirks (rhbz 1124119)
Add patch to fix loop in VDSO (rhbz 1178975)
2015-01-12 13:17:01 +00:00
- Add patch to fix loop in VDSO (rhbz 1178975)
Linux v3.19-rc3-69-g11c8f01b423b
2015-01-09 14:24:39 +00:00
* Fri Jan 09 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc3.git2.1
- Linux v3.19-rc3-69-g11c8f01b423b
kernel-arm64.patch: fix up build... no idea if it works
2015-01-07 19:39:48 +00:00
* Wed Jan 07 2015 Kyle McMartin <kyle@fedoraproject.org> - 3.19.0-0.rc3.git1.2
- kernel-arm64.patch: fix up build... no idea if it works.
CVE-2014-9529 memory corruption or panic during key gc (rhbz 1179813 1179853)
2015-01-07 17:56:46 +00:00
* Wed Jan 07 2015 Josh Boyer <jwboyer@fedoraproject.org>
- CVE-2014-9529 memory corruption or panic during key gc (rhbz 1179813 1179853)
Linux v3.19-rc3-38-gbdec41963890 - Enable POWERCAP and INTEL_RAPL options - Reenable debugging options.
2015-01-07 15:55:00 +00:00
* Wed Jan 07 2015 Josh Boyer <jwboyer@fedoraproject.org> - 3.19.0-0.rc3.git1.1
- Linux v3.19-rc3-38-gbdec41963890
- Enable POWERCAP and INTEL_RAPL options
- Reenable debugging options.
Linux v3.19-rc3
2015-01-06 15:19:30 +00:00
* Tue Jan 06 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Linux v3.19-rc3
Linux v3.19-rc2 - Temporarily disable aarch64patches - Happy New Year
2015-01-05 21:09:49 +00:00
* Mon Jan 05 2015 Josh Boyer <jwboyer@fedoraproject.org>
- Linux v3.19-rc2
- Temporarily disable aarch64patches
- Happy New Year
Enable F2FS (rhbz 972446)
2014-12-29 19:07:41 +00:00
* Sun Dec 28 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Enable F2FS (rhbz 972446)
Bump for build
2014-12-18 23:53:27 +00:00
* Thu Dec 18 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.1-2
CVE-2014-8989 userns can bypass group restrictions (rhbz 1170684 1170688)
2014-12-18 21:17:32 +00:00
- CVE-2014-8989 userns can bypass group restrictions (rhbz 1170684 1170688)
Fix from Kyle McMartin for target_core_user uapi issue since it's enabled
2014-12-18 18:36:25 +00:00
- Fix from Kyle McMartin for target_core_user uapi issue since it's enabled
Fix dm-cache crash (rhbz 1168434)
2014-12-18 15:06:55 +00:00
- Fix dm-cache crash (rhbz 1168434)
Fix blk-mq crash on CPU hotplug (rhbz 1175261)
2014-12-18 13:49:08 +00:00
- Fix blk-mq crash on CPU hotplug (rhbz 1175261)
Linux v3.18.1
2014-12-17 13:27:20 +00:00
* Wed Dec 17 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.1-1
- Linux v3.18.1
CVE-2014-XXXX isofs: infinite loop in CE record entries (rhbz 1175235 1175250)
2014-12-17 13:29:30 +00:00
- CVE-2014-XXXX isofs: infinite loop in CE record entries (rhbz 1175235 1175250)
Enable TCM_USER (rhbz 1174986)
2014-12-17 15:48:27 +00:00
- Enable TCM_USER (rhbz 1174986)
Add USBIP drivers to kernel-modules-extra Signed-off-by: Jonathan Dieter <jdieter@lesbg.com>
2014-12-08 09:52:53 +00:00
- Enable USBIP in modules-extra from Johnathan Dieter (rhbz 1169478)
Linux v3.18.1
2014-12-17 13:27:20 +00:00
Bump for build
2014-12-16 19:21:39 +00:00
* Tue Dec 16 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-2
Add patch from Josh Stone to restore var-tracking via Kconfig (rhbz 1126580)
2014-12-16 17:13:21 +00:00
- Add patch from Josh Stone to restore var-tracking via Kconfig (rhbz 1126580)
CVE-2014-8559 deadlock due to incorrect usage of rename_lock (rhbz 1159313 1173814)
2014-12-15 13:14:26 +00:00
* Mon Dec 15 2014 Josh Boyer <jwboyer@fedoraproject.org>
Fix ppc64 boot with smt-enabled=off (rhbz 1173806)
2014-12-15 19:39:28 +00:00
- Fix ppc64 boot with smt-enabled=off (rhbz 1173806)
CVE-2014-8133 x86: espfix(64) bypass via set_thread_area and CLONE_SETTLS (rhbz 1172797 1174374)
2014-12-15 19:26:22 +00:00
- CVE-2014-8133 x86: espfix(64) bypass via set_thread_area and CLONE_SETTLS (rhbz 1172797 1174374)
CVE-2014-8559 deadlock due to incorrect usage of rename_lock (rhbz 1159313 1173814)
2014-12-15 13:14:26 +00:00
- CVE-2014-8559 deadlock due to incorrect usage of rename_lock (rhbz 1159313 1173814)
build in ahci_platform on aarch64 temporarily
2014-12-12 22:43:15 +00:00
* Fri Dec 12 2014 Kyle McMartin <kyle@fedoraproject.org>
- build in ahci_platform on aarch64 temporarily.
Remove pointless warning in cfg80211 (rhbz 1172543)
2014-12-12 14:40:10 +00:00
* Fri Dec 12 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Remove pointless warning in cfg80211 (rhbz 1172543)
kernel-arm64.patch: update from git
2014-12-11 23:28:54 +00:00
* Thu Dec 11 2014 Kyle McMartin <kyle@fedoraproject.org>
- kernel-arm64.patch: update from git.
CVE-2014-8134 fix espfix for 32-bit KVM paravirt guests (rhbz 1172765 1172769)
2014-12-10 18:48:47 +00:00
* Wed Dec 10 2014 Josh Boyer <jwboyer@fedoraproject.org>
Fix UAS crashes with Seagate and Fresco Logic drives (rhbz 1164945)
2014-12-10 19:11:21 +00:00
- Fix UAS crashes with Seagate and Fresco Logic drives (rhbz 1164945)
CVE-2014-8134 fix espfix for 32-bit KVM paravirt guests (rhbz 1172765 1172769)
2014-12-10 18:48:47 +00:00
- CVE-2014-8134 fix espfix for 32-bit KVM paravirt guests (rhbz 1172765 1172769)
Linux v3.18
2014-12-09 14:25:39 +00:00
* Tue Dec 09 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-1
- Linux v3.18
Linux v3.18-rc7-59-g56c67ce187a8
2014-12-05 14:48:05 +00:00
* Fri Dec 05 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc7.git3.1
- Linux v3.18-rc7-59-g56c67ce187a8
Linux v3.18-rc7-48-g7cc78f8fa02c
2014-12-04 14:10:26 +00:00
* Thu Dec 04 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc7.git2.1
- Linux v3.18-rc7-48-g7cc78f8fa02c
Linux v3.18-rc7-3-g3a18ca061311
2014-12-03 21:17:09 +00:00
* Wed Dec 03 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc7.git1.1
- Linux v3.18-rc7-3-g3a18ca061311
Linux v3.18-rc7
2014-12-01 14:22:55 +00:00
* Mon Dec 01 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc7.git0.1
- Linux v3.18-rc7
Linux v3.18-rc6-28-g3314bf6ba2ac - Gobble Gobble
2014-11-27 14:33:13 +00:00
* Thu Nov 27 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc6.git1.1
- Linux v3.18-rc6-28-g3314bf6ba2ac
- Gobble Gobble
Linux v3.18-rc6
2014-11-24 13:25:40 +00:00
* Mon Nov 24 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Linux v3.18-rc6
Add quirk for Laser Mouse 6000 (rhbz 1165206)
2014-11-24 13:28:29 +00:00
- Add quirk for Laser Mouse 6000 (rhbz 1165206)
Linux v3.18-rc6
2014-11-24 13:25:40 +00:00
Move TPM drivers to main kernel package (rhbz 1164937)
2014-11-21 15:58:57 +00:00
* Fri Nov 21 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Move TPM drivers to main kernel package (rhbz 1164937)
Disable SERIAL_8250 on s390x (rhbz 1158848)
2014-11-19 18:24:16 +00:00
* Wed Nov 19 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Disable SERIAL_8250 on s390x (rhbz 1158848)
Re-merge kernel-arm64.patch
2014-11-17 18:37:29 +00:00
* Mon Nov 17 2014 Kyle McMartin <kyle@fedoraproject.org> - 3.18.0-0.rc5.git0.2
- Re-merge kernel-arm64.patch
Linux v3.18-rc5 - Disable debugging options.
2014-11-17 14:48:04 +00:00
* Mon Nov 17 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc5.git0.1
- Linux v3.18-rc5
- Disable debugging options.
Enable I40EVF driver (rhbz 1164029)
2014-11-14 13:38:23 +00:00
* Fri Nov 14 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Enable I40EVF driver (rhbz 1164029)
Linux v3.18-rc4-184-gb23dc5a7cc6e
2014-11-14 13:35:51 +00:00
* Fri Nov 14 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc4.git2.1
- Linux v3.18-rc4-184-gb23dc5a7cc6e
CVE-2014-7843 aarch64: copying from /dev/zero causes local DoS (rhbz 1163744 1163745)
2014-11-13 13:30:23 +00:00
* Thu Nov 13 2014 Josh Boyer <jwboyer@fedoraproject.org>
Add patch for MS Surface Pro 3 Type Cover (rhbz 1135338)
2014-11-13 18:55:54 +00:00
- Add patch for MS Surface Pro 3 Type Cover (rhbz 1135338)
CVE-2014-7843 aarch64: copying from /dev/zero causes local DoS (rhbz 1163744 1163745)
2014-11-13 13:30:23 +00:00
- CVE-2014-7843 aarch64: copying from /dev/zero causes local DoS (rhbz 1163744 1163745)
Linux v3.18-rc4-52-g04689e749b7e - Reenable debugging options.
2014-11-13 12:43:02 +00:00
* Thu Nov 13 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc4.git1.1
- Linux v3.18-rc4-52-g04689e749b7e
- Reenable debugging options.
CVE-2014-7841 sctp: NULL ptr deref on malformed packet (rhbz 1163087 1163095)
2014-11-12 14:24:30 +00:00
* Wed Nov 12 2014 Josh Boyer <jwboyer@fedoraproject.org>
- CVE-2014-7841 sctp: NULL ptr deref on malformed packet (rhbz 1163087 1163095)
Re-enable kernel-arm64.patch, and fix up merge conflicts with 3.18-rc4
2014-11-11 14:38:12 +00:00
* Tue Nov 11 2014 Kyle McMartin <kyle@fedoraproject.org> - 3.18.0-0.rc4.git0.2
- Re-enable kernel-arm64.patch, and fix up merge conflicts with 3.18-rc4
Fix Samsung pci-e SSD handling on some macbooks (rhbz 1161805)
2014-11-10 20:03:43 +00:00
* Mon Nov 10 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Fix Samsung pci-e SSD handling on some macbooks (rhbz 1161805)
Linux v3.18-rc4 - Temporarily disable aarch64patches - Disable debugging options.
2014-11-10 15:18:23 +00:00
* Mon Nov 10 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc4.git0.1
- Linux v3.18-rc4
- Temporarily disable aarch64patches
- Disable debugging options.
Linux v3.18-rc3-82-ged78bb846e8b
2014-11-07 13:21:04 +00:00
* Fri Nov 07 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc3.git4.1
- Linux v3.18-rc3-82-ged78bb846e8b
Linux v3.18-rc3-68-g20f3963d8f48
2014-11-06 14:22:54 +00:00
* Thu Nov 06 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc3.git3.1
- Linux v3.18-rc3-68-g20f3963d8f48
Linux v3.18-rc3-61-ga1cff6e25e6e
2014-11-05 14:42:01 +00:00
* Wed Nov 05 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc3.git2.1
- Linux v3.18-rc3-61-ga1cff6e25e6e
Linux v3.18-rc3-31-g980d0d51b1c9 - Reenable debugging options.
2014-11-04 14:12:31 +00:00
* Tue Nov 04 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc3.git1.1
- Linux v3.18-rc3-31-g980d0d51b1c9
- Reenable debugging options.
Add driver for goodix touchscreen from Bastien Nocera
2014-11-03 18:22:56 +00:00
* Mon Nov 03 2014 Josh Boyer <jwboyer@fedoraproject.org>
Enable CONFIG_KXCJK1013
2014-11-03 18:24:17 +00:00
- Enable CONFIG_KXCJK1013
Add driver for goodix touchscreen from Bastien Nocera
2014-11-03 18:22:56 +00:00
- Add driver for goodix touchscreen from Bastien Nocera
Linux v3.18-rc3 - Disable debugging options.
2014-11-03 15:15:39 +00:00
* Mon Nov 03 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc3.git0.1
- Linux v3.18-rc3
- Disable debugging options.
Linux v3.18-rc2-106-ga7ca10f263d7
2014-10-30 13:41:14 +00:00
* Thu Oct 30 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc2.git3.1
- Linux v3.18-rc2-106-ga7ca10f263d7
Linux v3.18-rc2-53-g9f76628da20f
2014-10-29 12:50:16 +00:00
* Wed Oct 29 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc2.git2.1
- Linux v3.18-rc2-53-g9f76628da20f
Add quirk for rfkill on Yoga 3 machines (rhbz 1157327)
2014-10-28 18:18:25 +00:00
* Tue Oct 28 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Add quirk for rfkill on Yoga 3 machines (rhbz 1157327)
Linux v3.18-rc2-43-gf7e87a44ef60 - Add two RCU patches to fix a deadlock and a hang - Reenable debugging options.
2014-10-28 13:55:15 +00:00
* Tue Oct 28 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc2.git1.1
- Linux v3.18-rc2-43-gf7e87a44ef60
- Add two RCU patches to fix a deadlock and a hang
- Reenable debugging options.
Linux v3.18-rc2 - Disable debugging options.
2014-10-27 12:48:49 +00:00
* Mon Oct 27 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc2.git0.1
- Linux v3.18-rc2
- Disable debugging options.
Update ARM config options, some minor cleanups
2014-10-27 09:21:05 +00:00
* Sun Oct 26 2014 Peter Robinson <pbrobinson@fedoraproject.org>
- Update ARM config options, some minor cleanups
Linux v3.18-rc1-422-g2cc91884b6b3
2014-10-26 14:06:02 +00:00
* Sun Oct 26 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc1.git4.1
- Linux v3.18-rc1-422-g2cc91884b6b3
Bump baserelease for build
2014-10-25 00:28:43 +00:00
* Fri Oct 24 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc1.git3.3
CVE-2014-3610 kvm: noncanonical MSR writes (rhbz 1144883 1156543) - CVE-2014-3611 kvm: PIT timer race condition (rhbz 1144878 1156537) - CVE-2014-3646 kvm: vmx: invvpid vm exit not handled (rhbz 1144825 1156534) - CVE-2014-8369 kvm: excessive pages un-pinning in kvm_iommu_map error path (rhbz 1156518 1156522) - CVE-2014-8480 CVE-2014-8481 kvm: NULL pointer dereference during rip relative instruction emulation (rhbz 1156615 1156616)
2014-10-24 17:34:55 +00:00
- CVE-2014-3610 kvm: noncanonical MSR writes (rhbz 1144883 1156543)
- CVE-2014-3611 kvm: PIT timer race condition (rhbz 1144878 1156537)
- CVE-2014-3646 kvm: vmx: invvpid vm exit not handled (rhbz 1144825 1156534)
- CVE-2014-8369 kvm: excessive pages un-pinning in kvm_iommu_map error path (rhbz 1156518 1156522)
- CVE-2014-8480 CVE-2014-8481 kvm: NULL pointer dereference during rip relative instruction emulation (rhbz 1156615 1156616)
Linux v3.18-rc1-280-g816fb4175c29
2014-10-24 14:02:17 +00:00
* Fri Oct 24 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc1.git3.1
- Linux v3.18-rc1-280-g816fb4175c29
Add touchpad quirk for Fujitsu Lifebook A544/AH544 models (rhbz 1111138)
2014-10-24 14:56:43 +00:00
- Add touchpad quirk for Fujitsu Lifebook A544/AH544 models (rhbz 1111138)
Linux v3.18-rc1-280-g816fb4175c29
2014-10-24 14:02:17 +00:00
Linux v3.18-rc1-221-gc3351dfabf5c - Add patch to fix wifi on X550VB machines (rhbz 1089731)
2014-10-22 13:59:21 +00:00
* Wed Oct 22 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc1.git2.1
- Linux v3.18-rc1-221-gc3351dfabf5c
- Add patch to fix wifi on X550VB machines (rhbz 1089731)
Drop pinctrl qcom revert now that it's dependencies should be merged
2014-10-21 19:20:59 +00:00
* Tue Oct 21 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Drop pinctrl qcom revert now that it's dependencies should be merged
Re-enable kernel-arm64.patch after updating. - CONFIG_SERIAL_8250_FINTEK moved to generic since it appears on x86-generic and arm64 now. - CONFIG_IMX_THERMAL=n added to config-arm64.
2014-10-21 17:05:11 +00:00
* Tue Oct 21 2014 Kyle McMartin <kyle@fedoraproject.org> - 3.18.0-0.rc1.git1.2
- Re-enable kernel-arm64.patch after updating.
- CONFIG_SERIAL_8250_FINTEK moved to generic since it appears on x86-generic
and arm64 now.
- CONFIG_IMX_THERMAL=n added to config-arm64.
- arm64: disable BPF_JIT temporarily
Linux v3.18-rc1-68-gc2661b806092 - Make LOG_BUF_SHIFT on arm64 the same as the rest of the arches (rhbz 1123327) - Enable RTC PL031 driver on arm64 (rhbz 1123882) - Reenable debugging options.
2014-10-21 13:22:39 +00:00
* Tue Oct 21 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc1.git1.1
- Linux v3.18-rc1-68-gc2661b806092
- Make LOG_BUF_SHIFT on arm64 the same as the rest of the arches (rhbz 1123327)
- Enable RTC PL031 driver on arm64 (rhbz 1123882)
- Reenable debugging options.
Linux v3.18-rc1 - Disable debugging options.
2014-10-20 17:34:33 +00:00
* Mon Oct 20 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc1.git0.1
- Linux v3.18-rc1
- Disable debugging options.
Add NVR for build
2014-10-17 19:36:18 +00:00
* Fri Oct 17 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git9.4
CVE-2014-8086 ext4: race condition (rhbz 1151353 1152608)
2014-10-17 19:13:19 +00:00
- CVE-2014-8086 ext4: race condition (rhbz 1151353 1152608)
Enable B43_PHY_G to fix b43 driver regression (rhbz 1152502) Also build fq_codel network scheduler in
2014-10-17 17:28:42 +00:00
- Enable B43_PHY_G to fix b43 driver regression (rhbz 1152502)
Add NVR for build
2014-10-16 17:38:29 +00:00
* Wed Oct 15 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git9.3
Revert Btrfs ro snapshot commit that causes filesystem corruption
2014-10-15 16:47:23 +00:00
- Revert Btrfs ro snapshot commit that causes filesystem corruption
Linux v3.17-9670-g0429fbc0bdc2
2014-10-15 12:18:47 +00:00
* Wed Oct 15 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git9.1
- Linux v3.17-9670-g0429fbc0bdc2
Add patches to fix elantech touchscreens (rhbz 1149509)
2014-10-14 19:35:49 +00:00
* Tue Oct 14 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Add patches to fix elantech touchscreens (rhbz 1149509)
Linux v3.17-9283-g2d65a9f48fcd
2014-10-14 14:54:21 +00:00
* Tue Oct 14 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git8.1
- Linux v3.17-9283-g2d65a9f48fcd
Linux v3.17-8307-gf1d0d14120a8
2014-10-14 13:36:10 +00:00
* Tue Oct 14 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git7.1
- Linux v3.17-8307-gf1d0d14120a8
Update armv7/aarch64 config options
2014-10-13 18:30:51 +00:00
* Mon Oct 13 2014 Peter Robinson <pbrobinson@fedoraproject.org>
- Update armv7/aarch64 config options
Linux v3.17-7872-g5ff0b9e1a1da
2014-10-13 17:42:01 +00:00
* Mon Oct 13 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git6.1
- Linux v3.17-7872-g5ff0b9e1a1da
Linux v3.17-7639-g90eac7eee2f4
2014-10-13 11:56:44 +00:00
* Sun Oct 12 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git5.1
- Linux v3.17-7639-g90eac7eee2f4
Enable CONFIG_I2C_DESIGNWARE_PCI (rhbz 1045821)
2014-10-12 13:50:42 +00:00
* Sun Oct 12 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Enable CONFIG_I2C_DESIGNWARE_PCI (rhbz 1045821)
CVE-2014-7970 VFS: DoS with USER_NS (rhbz 1151095 1151484)
2014-10-10 15:19:12 +00:00
* Fri Oct 10 2014 Josh Boyer <jwboyer@fedoraproject.org>
- CVE-2014-7970 VFS: DoS with USER_NS (rhbz 1151095 1151484)
Linux v3.17-6136-gc798360cd143
2014-10-10 13:14:00 +00:00
* Fri Oct 10 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git4.1
- Linux v3.17-6136-gc798360cd143
Linux v3.17-5585-g782d59c5dfc5
2014-10-10 12:52:15 +00:00
* Thu Oct 09 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git3.1
- Linux v3.17-5585-g782d59c5dfc5
Linux v3.17-5503-g35a9ad8af0bb
2014-10-09 13:45:05 +00:00
* Thu Oct 09 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git2.1
- Linux v3.17-5503-g35a9ad8af0bb
Linux v3.17-2860-gef0625b70dac - Reenable debugging options. - Temporarily disable aarch64patches
2014-10-08 16:10:10 +00:00
* Wed Oct 08 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.18.0-0.rc0.git1.1
- Linux v3.17-2860-gef0625b70dac
- Reenable debugging options.
- Temporarily disable aarch64patches
Add patch to fix ATA blacklist
2014-10-08 16:20:56 +00:00
- Add patch to fix ATA blacklist
Linux v3.17-2860-gef0625b70dac - Reenable debugging options. - Temporarily disable aarch64patches
2014-10-08 16:10:10 +00:00
Add patch to fix GFS2 regression (from Bob Peterson)
2014-10-07 18:08:27 +00:00
* Tue Oct 07 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Add patch to fix GFS2 regression (from Bob Peterson)
enable 64k pages on arm64
2014-10-03 20:56:54 +00:00
* Mon Oct 06 2014 Kyle McMartin <kyle@fedoraproject.org>
- enable 64K pages on arm64... (presently) needed to boot on amd seattle
platforms due to physical memory being unreachable.
Linux v3.17
2014-10-06 13:00:35 +00:00
* Mon Oct 06 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-1
- Linux v3.17
Linux v3.17-rc7-76-g58586869599f - Various ppc64/ppc64le config changes
2014-10-03 13:50:35 +00:00
* Fri Oct 03 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc7.git3.1
- Linux v3.17-rc7-76-g58586869599f
- Various ppc64/ppc64le config changes
Linux v3.17-rc7-46-g50dddff3cb9a - Cleanup dead Kconfig symbols in config-* from Paul Bolle
2014-10-02 13:52:37 +00:00
* Thu Oct 02 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc7.git2.1
- Linux v3.17-rc7-46-g50dddff3cb9a
- Cleanup dead Kconfig symbols in config-* from Paul Bolle
Update kernel-arm64.patch from git, again... enable AMD_XGBE on arm64.
2014-10-01 20:53:52 +00:00
* Wed Oct 01 2014 Kyle McMartin <kyle@fedoraproject.org>
- Update kernel-arm64.patch from git, again... enable AMD_XGBE on arm64.
Linux v3.17-rc7-6-gaad7fb916a10
2014-10-01 14:09:16 +00:00
* Wed Oct 01 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc7.git1.1
- Linux v3.17-rc7-6-gaad7fb916a10
tag for build 3.17.0-0.rc7.git0.2
2014-09-30 20:53:17 +00:00
* Tue Sep 30 2014 Kyle McMartin <kyle@fedoraproject.org> - 3.17.0-0.rc7.git0.2
Revert some v3.16 changes to mach-highbank which broke L2 cache enablement. Will debug upstream separately, but we need F22/21 running there. (#1139762)
2014-09-30 20:19:47 +00:00
- Revert some v3.16 changes to mach-highbank which broke L2 cache enablement.
Will debug upstream separately, but we need F22/21 running there. (#1139762)
Don't build Exynos4 on lpae kernel, Add dts for BananaPi, Minor ARM updates, Build 6lowpan modules
2014-09-30 13:29:26 +00:00
* Tue Sep 30 2014 Peter Robinson <pbrobinson@fedoraproject.org>
- Don't build Exynos4 on lpae kernel
- Add dts for BananaPi
- Minor ARM updates
- Build 6lowpan modules
Update kernel-arm64.patch from git.
2014-09-29 18:14:17 +00:00
* Mon Sep 29 2014 Kyle McMartin <kyle@fedoraproject.org>
- Update kernel-arm64.patch from git.
Linux v3.17-rc7
2014-09-29 13:54:15 +00:00
* Mon Sep 29 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc7.git0.1
- Linux v3.17-rc7
Linux v3.17-rc6-180-g452b6361c4d9
2014-09-24 13:41:34 +00:00
* Wed Sep 24 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc6.git2.1
- Linux v3.17-rc6-180-g452b6361c4d9
Add patch to fix XPS 13 touchpad issue (rhbz 1123584)
2014-09-23 13:23:12 +00:00
* Tue Sep 23 2014 Josh Boyer <jwboyer@fedoraproject.org>
Fix return code when adding keys (rhbz 1145318)
2014-09-23 15:57:30 +00:00
- Fix return code when adding keys (rhbz 1145318)
Add patch to fix XPS 13 touchpad issue (rhbz 1123584)
2014-09-23 13:23:12 +00:00
- Add patch to fix XPS 13 touchpad issue (rhbz 1123584)
Linux v3.17-rc6-125-gf3670394c29f
2014-09-23 14:19:58 +00:00
* Tue Sep 23 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc6.git1.1
- Linux v3.17-rc6-125-gf3670394c29f
Linux v3.17-rc6 - Revert EFI GOT fixes as it causes boot failures - Disable debugging options.
2014-09-22 20:08:53 +00:00
* Mon Sep 22 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc6.git0.1
- Linux v3.17-rc6
- Revert EFI GOT fixes as it causes boot failures
- Disable debugging options.
Linux v3.17-rc5-105-g598a0c7d0932
2014-09-19 19:39:14 +00:00
* Fri Sep 19 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc5.git5.1
- Linux v3.17-rc5-105-g598a0c7d0932
Disable NO_HZ_FULL again - Enable early microcode loading (rhbz 1083716)
2014-09-19 18:40:35 +00:00
* Fri Sep 19 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Disable NO_HZ_FULL again
- Enable early microcode loading (rhbz 1083716)
Linux v3.17-rc5-63-gd9773ceabfaf - Enable infiniband on s390x
2014-09-19 16:40:32 +00:00
* Fri Sep 19 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc5.git4.1
- Linux v3.17-rc5-63-gd9773ceabfaf
- Enable infiniband on s390x
Linux v3.17-rc5-25-g8ba4caf1ee15
2014-09-18 19:04:06 +00:00
* Thu Sep 18 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc5.git3.1
- Linux v3.17-rc5-25-g8ba4caf1ee15
re-enable RCU_FAST_NO_HZ, enable NO_HZ_FULL on x86_64 - I also like to live dangerously. (Re-enable RCU_FAST_NO_HZ which has been off since April 2012. Also enable NO_HZ_FULL on x86_64.) - I added zipped modules ages ago, remove it from TODO.
2014-09-17 18:10:12 +00:00
* Wed Sep 17 2014 Kyle McMartin <kyle@fedoraproject.org>
- I also like to live dangerously. (Re-enable RCU_FAST_NO_HZ which has been off
since April 2012. Also enable NO_HZ_FULL on x86_64.)
- I added zipped modules ages ago, remove it from TODO.
Linux v3.17-rc5-24-g37504a3be90b - Fix vmwgfx header include (rhbz 1138759)
2014-09-17 13:48:32 +00:00
* Wed Sep 17 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc5.git2.1
- Linux v3.17-rc5-24-g37504a3be90b
- Fix vmwgfx header include (rhbz 1138759)
Linux v3.17-rc5-13-g2324067fa9a4 - Reenable debugging options.
2014-09-16 13:07:16 +00:00
* Tue Sep 16 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc5.git1.1
- Linux v3.17-rc5-13-g2324067fa9a4
- Reenable debugging options.
Linux v3.17-rc5 - Disable debugging options.
2014-09-15 15:10:34 +00:00
* Mon Sep 15 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc5.git0.1
- Linux v3.17-rc5
- Disable debugging options.
Linux v3.17-rc4-244-g5874cfed0b04
2014-09-12 17:26:54 +00:00
* Fri Sep 12 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc4.git4.1
- Linux v3.17-rc4-244-g5874cfed0b04
Enable ACPI_I2C_OPREGION
2014-09-11 19:16:35 +00:00
* Thu Sep 11 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Enable ACPI_I2C_OPREGION
Linux v3.17-rc4-168-g7ec62d421bdf - Add support for touchpad in Asus X450 and X550 (rhbz 1110011)
2014-09-11 13:04:00 +00:00
* Thu Sep 11 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc4.git3.1
- Linux v3.17-rc4-168-g7ec62d421bdf
- Add support for touchpad in Asus X450 and X550 (rhbz 1110011)
Linux v3.17-rc4-158-ge874a5fe3efa - Add patch to fix oops on keyring gc (rhbz 1116347)
2014-09-10 13:55:35 +00:00
* Wed Sep 10 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc4.git2.1
- Linux v3.17-rc4-158-ge874a5fe3efa
- Add patch to fix oops on keyring gc (rhbz 1116347)
Linux v3.17-rc4-140-g8c68face5548 - Reenable debugging options.
2014-09-09 13:22:23 +00:00
* Tue Sep 09 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc4.git1.1
- Linux v3.17-rc4-140-g8c68face5548
- Reenable debugging options.
Remove ppc32 support The powerpc secondary arch team has disabled all ppc32 builds in koji for F21 and beyond: https://lists.fedoraproject.org/pipermail/ppc/2014-May/002801.html FESCo also recently said that dropped or new architectures must essentially prove they have an active and viable effort behind them before being considered for Secondary Arch support. This effort has not materialized in the interim since the current powerpc team dropped ppc32. There's little point in keeping support for ppc32 support in the kernel package when it will never be built. This also removes the -smp variant and with_smp* support, as that was only used on ppc32.
2014-09-08 18:43:02 +00:00
* Mon Sep 08 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Remove ppc32 support
Build tools on ppc64le (rhbz 1138884), Some minor ppc64 cleanups
2014-09-08 18:31:10 +00:00
* Mon Sep 8 2014 Peter Robinson <pbrobinson@fedoraproject.org>
- Build tools on ppc64le (rhbz 1138884)
- Some minor ppc64 cleanups
Linux v3.17-rc4 - Disable debugging options.
2014-09-08 12:19:57 +00:00
* Mon Sep 08 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc4.git0.1
- Linux v3.17-rc4
- Disable debugging options.
Linux v3.17-rc3-94-gb7fece1be8b1
2014-09-05 14:18:34 +00:00
* Fri Sep 05 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc3.git3.1
- Linux v3.17-rc3-94-gb7fece1be8b1
Linux v3.16.2
2014-09-06 02:28:29 +00:00
Linux v3.17-rc3-63-g44bf091f5089 - Enable kexec bzImage signature verification (from Vivek Goyal) - Add support for Wacom Cintiq Companion from Benjamin Tissoires (rhbz 1134969)
2014-09-04 13:34:41 +00:00
* Thu Sep 04 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc3.git2.1
- Linux v3.17-rc3-63-g44bf091f5089
- Enable kexec bzImage signature verification (from Vivek Goyal)
Add support for Wacom Cintiq Companion from Benjamin Tissoires (rhbz 1134969)
2014-09-04 12:47:53 +00:00
- Add support for Wacom Cintiq Companion from Benjamin Tissoires (rhbz 1134969)
Linux v3.17-rc3-16-g955837d8f50e - Reenable debugging options.
2014-09-03 19:29:26 +00:00
* Wed Sep 03 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc3.git1.1
- Linux v3.17-rc3-16-g955837d8f50e
- Reenable debugging options.
Remove with_extra switch The with_extra switch was originally added with the addition of the modules-extra subpackage. However, it never really worked. If you build with it disabled, the subpackage is omitted but the modules that would be included in it would still be built. That can lead to errors further in the build when we're moving things around in the -core and -modules subpackages. Since it doesn't actually save build time at all, and it leads to build failures for no real gain, drop it.
2014-09-02 16:42:53 +00:00
* Tue Sep 02 2014 Josh Boyer <jwboyer@fedoraproject.org>
- Remove with_extra switch
Linux v3.17-rc3 - Disable debugging options.
2014-09-01 14:27:14 +00:00
* Mon Sep 01 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc3.git0.1
- Linux v3.17-rc3
- Disable debugging options.
Linux v3.17-rc2-89-g59753a805499
2014-08-29 13:19:32 +00:00
* Fri Aug 29 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc2.git3.1
- Linux v3.17-rc2-89-g59753a805499
Don't enable CONFIG_DEBUG_WW_MUTEX_SLOWPATH (rhbz 1114160)
2014-08-28 14:38:28 +00:00
* Thu Aug 28 2014 Josh Boyer <jwboyer@fedoraproject.org>
Fix NFSv3 ACL regression (rhbz 1132786)
2014-08-28 18:56:54 +00:00
- Fix NFSv3 ACL regression (rhbz 1132786)
Don't enable CONFIG_DEBUG_WW_MUTEX_SLOWPATH (rhbz 1114160)
2014-08-28 14:38:28 +00:00
Linux v3.17-rc2-42-gf1bd473f95e0 - Don't enable CONFIG_DEBUG_WW_MUTEX_SLOWPATH (rhbz 1114160)
2014-08-28 14:34:38 +00:00
* Thu Aug 28 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc2.git2.1
- Linux v3.17-rc2-42-gf1bd473f95e0
- Don't enable CONFIG_DEBUG_WW_MUTEX_SLOWPATH (rhbz 1114160)
CVE-2014-{5471,5472} isofs: Fix unbounded recursion when processing relocated directories
2014-08-27 20:52:39 +00:00
Linux v3.17-rc2-9-g68e370289c29 - Reenable debugging options.
2014-08-27 12:11:48 +00:00
* Wed Aug 27 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc2.git1.1
Disable streams on via XHCI (rhbz 1132666)
2014-08-27 12:15:27 +00:00
- Disable streams on via XHCI (rhbz 1132666)
Linux v3.17-rc2-9-g68e370289c29 - Reenable debugging options.
2014-08-27 12:11:48 +00:00
- Linux v3.17-rc2-9-g68e370289c29
- Reenable debugging options.
initial srpm import
2010-07-29 23:46:31 +00:00
###
# The following Emacs magic makes C-c C-e use UTC dates.
# Local Variables:
# rpm-change-log-uses-utc: t
# End:
###
Reference in New Issue Copy Permalink