kernel/kernel.spec

# We have to override the new %%install behavior because, well... the kernel is special.
%global __spec_install_pre %{___build_pre}

Summary: The Linux kernel

# For a stable, released kernel, released_kernel should be 1. For rawhide
# and/or a kernel built from an rc or git snapshot, released_kernel should
# be 0.
%global released_kernel 1

# Save original buildid for later if it's defined
%if 0%{?buildid:1}
%global orig_buildid %{buildid}
%undefine buildid
%endif

###################################################################
# Polite request for people who spin their own kernel rpms:
# please modify the "buildid" define in a way that identifies
# that the kernel isn't the stock distribution kernel, for example,
# by setting the define to ".local" or ".bz123456". This will be
# appended to the full kernel version.
#
# (Uncomment the '#' and both spaces below to set the buildid.)
#
# % define buildid .local
###################################################################

# The buildid can also be specified on the rpmbuild command line
# by adding --define="buildid .whatever". If both the specfile and
# the environment define a buildid they will be concatenated together.
%if 0%{?orig_buildid:1}
%if 0%{?buildid:1}
%global srpm_buildid %{buildid}
%define buildid %{srpm_buildid}%{orig_buildid}
%else
%define buildid %{orig_buildid}
%endif
%endif

# baserelease defines which build revision of this kernel version we're
# building.  We used to call this fedora_build, but the magical name
# baserelease is matched by the rpmdev-bumpspec tool, which you should use.
#
# We used to have some extra magic weirdness to bump this automatically,
# but now we don't.  Just use: rpmdev-bumpspec -c 'comment for changelog'
# When changing base_sublevel below or going from rc to a final kernel,
# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).
# scripts/rebase.sh should be made to do that for you, actually.
#
# NOTE: baserelease must be > 0 or bad things will happen if you switch
#       to a released kernel (released version will be < rc version)
#
# For non-released -rc kernels, this will be appended after the rcX and
# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3"
#
%global baserelease 3
%global fedora_build %{baserelease}

# base_sublevel is the kernel version we're starting with and patching
# on top of -- for example, 2.6.22-rc7-git1 starts with a 2.6.21 base,
# which yields a base_sublevel of 21.
%define base_sublevel 3

## If this is a released kernel ##
%if 0%{?released_kernel}

# Do we have a -stable update to apply?
%define stable_update 1
# Is it a -stable RC?
%define stable_rc 0
# Set rpm version accordingly
%if 0%{?stable_update}
%define stablerev %{stable_update}
%define stable_base %{stable_update}
%if 0%{?stable_rc}
# stable RCs are incremental patches, so we need the previous stable patch
%define stable_base %(echo $((%{stable_update} - 1)))
%endif
%endif
%define rpmversion 3.%{base_sublevel}.%{stable_update}

## The not-released-kernel case ##
%else
# The next upstream release sublevel (base_sublevel+1)
%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
# The rc snapshot level
%define rcrev 0
# The git snapshot level
%define gitrev 0
# Set rpm version accordingly
%define rpmversion 3.%{upstream_sublevel}.0
%endif
# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.

# What parts do we want to build?  We must build at least one kernel.
# These are the kernels that are built IF the architecture allows it.
# All should default to 1 (enabled) and be flipped to 0 (disabled)
# by later arch-specific checks.

# The following build options are enabled by default.
# Use either --without <opt> in your rpmbuild command or force values
# to 0 in here to disable them.
#
# standard kernel
%define with_up        %{?_without_up:        0} %{?!_without_up:        1}
# kernel-smp (only valid for ppc 32-bit)
%define with_smp       %{?_without_smp:       0} %{?!_without_smp:       1}
# kernel-PAE (only valid for i686)
%define with_pae       %{?_without_pae:       0} %{?!_without_pae:       1}
# kernel-debug
%define with_debug     %{?_without_debug:     0} %{?!_without_debug:     1}
# kernel-doc
%define with_doc       %{?_without_doc:       0} %{?!_without_doc:       1}
# kernel-headers
%define with_headers   %{?_without_headers:   0} %{?!_without_headers:   1}
# kernel-firmware
%define with_firmware  %{?_with_firmware:     1} %{?!_with_firmware:     0}
# tools
%define with_tools     %{?_without_tools:     0} %{?!_without_tools:     1}
# kernel-debuginfo
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
# kernel-bootwrapper (for creating zImages from kernel + initrd)
%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}
# Want to build a the vsdo directories installed
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
# ARM OMAP (Beagle/Panda Board)
%define with_omap      %{?_without_omap:      0} %{?!_without_omap:      1}
# kernel-tegra (only valid for arm)
%define with_tegra       %{?_without_tegra:       0} %{?!_without_tegra:       1}
# kernel-kirkwood (only valid for arm)
%define with_kirkwood       %{?_without_kirkwood:       0} %{?!_without_kirkwood:       1}
# kernel-imx (only valid for arm)
%define with_imx       %{?_without_imx:       0} %{?!_without_imx:       1}
# kernel-highbank (only valid for arm)
%define with_highbank       %{?_without_highbank:       0} %{?!_without_highbank:       1}

# Build the kernel-doc package, but don't fail the build if it botches.
# Here "true" means "continue" and "false" means "fail the build".
%if 0%{?released_kernel}
%define doc_build_fail false
%else
%define doc_build_fail true
%endif

%define rawhide_skip_docs 0
%if 0%{?rawhide_skip_docs}
%define with_doc 0
%define doc_build_fail true
%endif

# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly  %{?_with_baseonly:     1} %{?!_with_baseonly:     0}
# Only build the smp kernel (--with smponly):
%define with_smponly   %{?_with_smponly:      1} %{?!_with_smponly:      0}
# Only build the pae kernel (--with paeonly):
%define with_paeonly   %{?_with_paeonly:      1} %{?!_with_paeonly:      0}
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly   %{?_with_dbgonly:      1} %{?!_with_dbgonly:      0}

# should we do C=1 builds with sparse
%define with_sparse    %{?_with_sparse:       1} %{?!_with_sparse:       0}

# Set debugbuildsenabled to 1 for production (build separate debug kernels)
#  and 0 for rawhide (all kernels are debug kernels).
# See also 'make debug' and 'make release'.
%define debugbuildsenabled 1

# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}

# pkg_release is what we'll fill in for the rpm Release: field
%if 0%{?released_kernel}

%if 0%{?stable_rc}
%define stable_rctag .rc%{stable_rc}
%define pkg_release 0%{stable_rctag}.%{fedora_build}%{?buildid}%{?dist}
%else
%define pkg_release %{fedora_build}%{?buildid}%{?dist}
%endif

%else

# non-released_kernel
%if 0%{?rcrev}
%define rctag .rc%rcrev
%else
%define rctag .rc0
%endif
%if 0%{?gitrev}
%define gittag .git%gitrev
%else
%define gittag .git0
%endif
%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}

%endif

# The kernel tarball/base version
%define kversion 3.%{base_sublevel}

%define make_target bzImage

%define KVERREL %{version}-%{release}.%{_target_cpu}
%define hdrarch %_target_cpu
%define asmarch %_target_cpu

%if 0%{!?nopatches:1}
%define nopatches 0
%endif

%if %{with_vanilla}
%define nopatches 1
%endif

%if %{nopatches}
%define with_bootwrapper 0
%define variant -vanilla
%else
%define variant_fedora -fedora
%endif

%define using_upstream_branch 0
%if 0%{?upstream_branch:1}
%define stable_update 0
%define using_upstream_branch 1
%define variant -%{upstream_branch}%{?variant_fedora}
%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}
%endif

%if !%{debugbuildsenabled}
%define with_debug 0
%endif

%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug

# kernel-PAE is only built on i686.
%ifnarch i686
%define with_pae 0
%endif

# kernel-tegra, omap, imx and highbank are only built on armv7 hard and softfp
%ifnarch armv7hl armv7l
%define with_tegra 0
%define with_omap 0
%define with_imx 0
%define with_highbank 0
%endif

# kernel-kirkwood is only built for armv5
%ifnarch armv5tel
%define with_kirkwood 0
%endif

# if requested, only build base kernel
%if %{with_baseonly}
%define with_smp 0
%define with_pae 0
%define with_debug 0
%endif

# if requested, only build smp kernel
%if %{with_smponly}
%define with_up 0
%define with_pae 0
%define with_debug 0
%endif

# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
%define with_smp 0
%define with_debug 0
%endif

# if requested, only build debug kernel
%if %{with_dbgonly}
%if %{debugbuildsenabled}
%define with_up 0
%define with_pae 0
%endif
%define with_smp 0
%define with_pae 0
%define with_tools 0
%endif

%define all_x86 i386 i686

%if %{with_vdso_install}
# These arches install vdso/ directories.
%define vdso_arches %{all_x86} x86_64 ppc ppc64
%endif

# Overrides for generic default options

# only ppc and alphav56 need separate smp kernels
%ifnarch ppc alphaev56
%define with_smp 0
%endif

# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif

# only package docs noarch
%ifnarch noarch
%define with_doc 0
%endif

# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_headers 0
%define with_tools 0
%define all_arch_configs kernel-%{version}-*.config
%define with_firmware  %{?_with_firmware:     1} %{?!_with_firmware:     0}
%endif

# bootwrapper is only on ppc
%ifnarch ppc ppc64
%define with_bootwrapper 0
%endif

# sparse blows up on ppc64 alpha and sparc64
%ifarch ppc64 ppc alpha sparc64
%define with_sparse 0
%endif

# Per-arch tweaks

%ifarch %{all_x86}
%define asmarch x86
%define hdrarch i386
%define all_arch_configs kernel-%{version}-i?86*.config
%define image_install_path boot
%define kernel_image arch/x86/boot/bzImage
%endif

%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define image_install_path boot
%define kernel_image arch/x86/boot/bzImage
%endif

%ifarch ppc64
%define asmarch powerpc
%define hdrarch powerpc
%define all_arch_configs kernel-%{version}-ppc64*.config
%define image_install_path boot
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%endif

%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
%define image_install_path boot
%define make_target image
%define kernel_image arch/s390/boot/image
%define with_tools 0
%endif

%ifarch sparc64
%define asmarch sparc
%define all_arch_configs kernel-%{version}-sparc64*.config
%define make_target vmlinux
%define kernel_image vmlinux
%define image_install_path boot
%define with_tools 0
%endif

%ifarch sparcv9
%define hdrarch sparc
%endif

%ifarch ppc
%define asmarch powerpc
%define hdrarch powerpc
%define all_arch_configs kernel-%{version}-ppc{-,.}*config
%define image_install_path boot
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%endif

%ifarch alpha alphaev56
%define all_arch_configs kernel-%{version}-alpha*.config
%define image_install_path boot
%define make_target vmlinux
%define kernel_image vmlinux
%endif

%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
%define image_install_path boot
%define asmarch arm
%define hdrarch arm
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
# we build a up kernel on armv5tel. its used for qemu.
%ifnarch armv5tel
%define with_up 0
%define with_perf 0
%endif
# we only build headers on the base arm arches
# just like we used to only build them on i386 for x86
%ifnarch armv5tel armv7hl
%define with_headers 0
%endif
%endif

%if %{nopatches}
# XXX temporary until last vdso patches are upstream
%define vdso_arches ppc ppc64
%endif

# Should make listnewconfig fail if there's config options
# printed out?
%if %{nopatches}%{using_upstream_branch}
%define listnewconfig_fail 0
%else
%define listnewconfig_fail 1
%endif

# To temporarily exclude an architecture from being built, add it to
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).

# We only build kernel-headers on the following...
%define nobuildarches i386 s390 sparc sparcv9

%ifarch %nobuildarches
%define with_up 0
%define with_smp 0
%define with_pae 0
%define with_debuginfo 0
%define with_tools 0
%define _enable_debug_packages 0
%endif

%define with_pae_debug 0
%if %{with_pae}
%define with_pae_debug %{with_debug}
%endif

# Architectures we build tools/cpupower on
%define cpupowerarchs %{ix86} x86_64 ppc ppc64

#
# Three sets of minimum package version requirements in the form of Conflicts:
# to versions below the minimum
#

#
# First the general kernel 2.6 required versions as per
# Documentation/Changes
#
%define kernel_dot_org_conflicts  ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.0.7-12, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2, device-mapper-libs < 1.02.63-2, mdadm < 3.2.1-5

#
# Then a series of requirements that are distribution specific, either
# because we add patches for something, or the older versions have
# problems with the newer kernel or lack certain things that make
# integration in the distro harder than needed.
#
%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3

# We moved the drm include files into kernel-headers, make sure there's
# a recent enough libdrm-devel on the system that doesn't have those.
%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15

#
# Packages that need to be installed before the kernel is, because the %%post
# scripts use them.
#
%define kernel_prereq  fileutils, module-init-tools >= 3.16-5, initscripts >= 8.11.1-1, grubby >= 8.3-1
%define initrd_prereq  dracut >= 001-7

#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
#	%%kernel_reqprovconf <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf \
Provides: kernel = %{rpmversion}-%{pkg_release}\
Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\
Provides: kernel-drm = 4.3.0\
Provides: kernel-drm-nouveau = 16\
Provides: kernel-modeset = 1\
Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
%if %{with_firmware}\
Requires(pre): kernel-firmware >= %{rpmversion}-%{pkg_release}\
%else\
Requires(pre): linux-firmware >= 20120206-0.1.git06c8f81\
%endif\
Requires(post): /sbin/new-kernel-pkg\
Requires(preun): /sbin/new-kernel-pkg\
Conflicts: %{kernel_dot_org_conflicts}\
Conflicts: %{package_conflicts}\
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
AutoReq: no\
AutoProv: yes\
%{nil}

Name: kernel%{?variant}
Group: System Environment/Kernel
License: GPLv2
URL: http://www.kernel.org/
Version: %{rpmversion}
Release: %{pkg_release}
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 %{sparc} s390 s390x alpha alphaev56 %{arm}
ExclusiveOS: Linux

%kernel_reqprovconf

#
# List the packages used during the kernel build
#
BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar
BuildRequires: bzip2, xz, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk
BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config, hmaccalc
BuildRequires: net-tools
BuildRequires: xmlto, asciidoc
%if %{with_sparse}
BuildRequires: sparse >= 0.4.1
%endif
%if %{with_tools}
BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) pciutils-devel gettext
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb

%define fancy_debuginfo 0
%if %{with_debuginfo}
%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
%define fancy_debuginfo 1
%endif
%endif

%if %{fancy_debuginfo}
# Fancy new debuginfo generation introduced in Fedora 8.
BuildRequires: rpm-build >= 4.4.2.1-4
%define debuginfo_args --strict-build-id
%endif

Source0: ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-%{kversion}.tar.xz

Source11: genkey
Source14: find-provides
Source15: merge.pl

Source20: Makefile.config
Source21: config-debug
Source22: config-nodebug
Source23: config-generic
Source24: config-rhel-generic

Source30: config-x86-generic
Source31: config-i686-PAE
Source32: config-x86-32-generic

Source40: config-x86_64-generic

Source50: config-powerpc-generic
Source51: config-powerpc32-generic
Source52: config-powerpc32-smp
Source53: config-powerpc64

Source70: config-s390x

Source90: config-sparc64-generic

Source100: config-arm-generic
Source110: config-arm-omap-generic
Source111: config-arm-tegra
Source112: config-arm-kirkwood
Source113: config-arm-imx
Source114: config-arm-highbank

# This file is intentionally left empty in the stock kernel. Its a nicety
# added for those wanting to do custom rebuilds with altered config opts.
Source1000: config-local

# Sources for kernel-tools
Source2000: cpupower.service
Source2001: cpupower.config

# Here should be only the patches up to the upstream canonical Linus tree.

# For a stable release kernel
%if 0%{?stable_update}
%if 0%{?stable_base}
%define    stable_patch_00  patch-3.%{base_sublevel}.%{stable_base}.xz
Patch00: %{stable_patch_00}
%endif
%if 0%{?stable_rc}
%define    stable_patch_01  patch-3.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.xz
Patch01: %{stable_patch_01}
%endif

# non-released_kernel case
# These are automagically defined by the rcrev and gitrev values set up
# near the top of this spec file.
%else
%if 0%{?rcrev}
Patch00: patch-3.%{upstream_sublevel}-rc%{rcrev}.xz
%if 0%{?gitrev}
Patch01: patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Patch00: patch-3.%{base_sublevel}-git%{gitrev}.bz2
%endif
%endif
%endif

%if %{using_upstream_branch}
### BRANCH PATCH ###
%endif

Patch02: git-linus.diff

# we also need compile fixes for -vanilla
Patch04: linux-2.6-compile-fixes.patch

# build tweak for build ID magic, even for -vanilla
Patch05: linux-2.6-makefile-after_link.patch

%if !%{nopatches}


# revert upstream patches we get via other methods
Patch09: linux-2.6-upstream-reverts.patch
# Git trees.

# Standalone patches

Patch100: taint-vbox.patch
Patch160: linux-2.6-32bit-mmap-exec-randomization.patch
Patch161: linux-2.6-i386-nx-emulation.patch
Patch162: nx-emu-remove-cpuinitdata-for-disable_nx-on-x86_32.patch

Patch383: linux-2.6-defaults-aspm.patch

Patch390: linux-2.6-defaults-acpi-video.patch
Patch391: linux-2.6-acpi-video-dos.patch
Patch394: linux-2.6-acpi-debug-infinite-loop.patch
Patch395: acpi-ensure-thermal-limits-match-cpu-freq.patch
Patch396: acpi-sony-nonvs-blacklist.patch

Patch450: linux-2.6-input-kill-stupid-messages.patch
Patch452: linux-2.6.30-no-pcspkr-modalias.patch

Patch460: linux-2.6-serial-460800.patch

Patch470: die-floppy-die.patch
Patch471: floppy-drop-disable_hlt-warning.patch

Patch510: linux-2.6-silence-noise.patch
Patch511: silence-timekeeping-spew.patch
Patch520: quite-apm.patch
Patch530: linux-2.6-silence-fbcon-logo.patch

Patch700: linux-2.6-e1000-ich9-montevina.patch

Patch800: linux-2.6-crash-driver.patch

# crypto/

# virt + ksm patches
Patch1500: fix_xen_guest_on_old_EC2.patch

# DRM
#atch1700: drm-edid-try-harder-to-fix-up-broken-headers.patch

# intel drm is all merged upstream
Patch1824: drm-intel-next.patch
Patch1825: drm-i915-dp-stfu.patch

# hush the i915 fbc noise
Patch1826: drm-i915-fbc-stfu.patch

Patch1900: linux-2.6-intel-iommu-igfx.patch

# Quiet boot fixes
# silence the ACPI blacklist code
Patch2802: linux-2.6-silence-acpi-blacklist.patch

# media patches
Patch2903: drivers-media-update.patch

# fs fixes

#rhbz 753346
Patch3500: jbd-jbd2-validate-sb-s_first-in-journal_get_superblo.patch

# NFSv4
Patch4000: NFSv4-Reduce-the-footprint-of-the-idmapper.patch
Patch4001: NFSv4-Further-reduce-the-footprint-of-the-idmapper.patch

# patches headed upstream

Patch12016: disable-i8042-check-on-apple-mac.patch

Patch12303: dmar-disable-when-ricoh-multifunction.patch

Patch13003: efi-dont-map-boot-services-on-32bit.patch

Patch14000: hibernate-freeze-filesystems.patch
Patch14001: hibernate-watermark.patch

Patch14010: lis3-improve-handling-of-null-rate.patch

Patch15000: bluetooth-use-after-free.patch

Patch19000: ips-noirq.patch

Patch20000: utrace.patch

# Flattened devicetree support
Patch21000: arm-omap-dt-compat.patch
Patch21001: arm-smsc-support-reading-mac-address-from-device-tree.patch

Patch21070: ext4-Support-check-none-nocheck-mount-options.patch

#rhbz 769766
Patch21072: mac80211-fix-rx-key-NULL-ptr-deref-in-promiscuous-mode.patch

Patch21226: pci-crs-blacklist.patch

#rhbz 772772
Patch21232: rt2x00_fix_MCU_request_failures.patch

#rhbz 754518
#Patch21235: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch

#rhbz 789644
Patch21237: mcelog-rcu-splat.patch

#rhbz 727865 730007
Patch21240: ACPICA-Fix-regression-in-FADT-revision-checks.patch

#rhbz 728478
Patch21242: sony-laptop-Enable-keyboard-backlight-by-default.patch

Patch21300: unhandled-irqs-switch-to-polling.patch

#rhbz 804007
Patch21305: mac80211-fix-possible-tid_rx-reorder_timer-use-after-free.patch

#rhbz 804957 CVE-2012-1568
Patch21306: shlib_base_randomize.patch

#rhbz 804347
Patch21351: x86-add-io_apic_ops-to-allow-interception.patch
Patch21352: x86-apic_ops-Replace-apic_ops-with-x86_apic_ops.patch
Patch21353: xen-x86-Implement-x86_apic_ops.patch

#rhbz 806433
Patch21360: uvcvideo-Fix-race-induced-crash-in-uvc_video_clock_update.patch

#rhbz 770476
Patch21370: iwlegacy-do-not-nulify-il-vif-on-reset.patch
Patch21371: iwlwifi-do-not-nulify-ctx-vif-on-reset.patch

#rhbz 808603
Patch21380: wimax-i2400m-prevent-a-possible-kernel-bug-due-to-mi.patch

#rhbz 806676 807632
Patch21385: libata-disable-runtime-pm-for-hotpluggable-port.patch

Patch21501: nfs-Fix-length-of-buffer-copied-in-__nfs4_get_acl_uncached.patch

#rhbz 808207 CVE-2012-1601
Patch21520: KVM-Ensure-all-vcpus-are-consistent-with-in-kernel-i.patch

# Debug patches
Patch30000: weird-root-dentry-name-debug.patch
Patch30010: debug-808990.patch

%endif

BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root

%description
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system.  The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.


%package doc
Summary: Various documentation bits found in the kernel source
Group: Documentation
%description doc
This package contains documentation files from the kernel
source. Various bits of information about the Linux kernel and the
device drivers shipped with it are documented in these files.

You'll want to install this package if you need a reference to the
options that can be passed to Linux kernel modules at load time.


%package headers
Summary: Header files for the Linux kernel for use by glibc
Group: Development/System
Obsoletes: glibc-kernheaders < 3.0-46
Provides: glibc-kernheaders = 3.0-46
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs.  The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.

%package firmware
Summary: Firmware files used by the Linux kernel
Group: Development/System
# This is... complicated.
# Look at the WHENCE file.
License: GPL+ and GPLv2+ and MIT and Redistributable, no modification permitted
%if "x%{?variant}" != "x"
Provides: kernel-firmware = %{rpmversion}-%{pkg_release}
%endif
%description firmware
Kernel-firmware includes firmware files required for some devices to
operate.

%package bootwrapper
Summary: Boot wrapper files for generating combined kernel + initrd images
Group: Development/System
Requires: gzip binutils
%description bootwrapper
Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"
files combining both kernel and initial ramdisk.

%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Group: Development/Debug
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.

%if %{with_tools}
%package -n kernel-tools
Summary: Assortment of tools for the Linux kernel
Group: Development/System
License: GPLv2
Obsoletes: perf < 3.1.0-0.rc2.git7.2
Provides:  perf = %{version}-%{release}
Provides:  cpupowerutils = 1:009-0.6.p1
Obsoletes: cpupowerutils < 1:009-0.6.p1
Provides:  cpufreq-utils = 1:009-0.6.p1
Provides:  cpufrequtils = 1:009-0.6.p1
Obsoletes: cpufreq-utils < 1:009-0.6.p1
Obsoletes: cpufrequtils < 1:009-0.6.p1
Obsoletes: cpuspeed < 1:1.5-16
%description -n kernel-tools
This package contains the tools/ directory from the kernel source
- the perf tool and the supporting documentation.

%package -n kernel-tools-devel
Summary: Assortment of tools for the Linux kernel
Group: Development/System
License: GPLv2
Requires: kernel-tools = %{version}-%{release}
Provides:  cpupowerutils-devel = 1:009-0.6.p1
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
%description -n kernel-tools-devel
This package contains the development files for the tools/ directory from
the kernel source.

%package -n kernel-tools-debuginfo
Summary: Debug information for package kernel-tools
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n kernel-tools-debuginfo
This package provides debug information for package kernel-tools.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|XXX' -o kernel-tools-debuginfo.list}
%endif


#
# This macro creates a kernel-<subpackage>-debuginfo package.
#	%%kernel_debuginfo_package <subpackage>
#
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Group: Development/Debug\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
AutoReqProv: no\
%description -n %{name}%{?1:-%{1}}-debuginfo\
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
%{nil}

#
# This macro creates a kernel-<subpackage>-devel package.
#	%%kernel_devel_package <subpackage> <pretty-name>
#
%define kernel_devel_package() \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\
Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\
AutoReqProv: no\
Requires(pre): /usr/bin/find\
Requires: perl\
%description -n kernel%{?variant}%{?1:-%{1}}-devel\
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}

#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
#	%%define variant_summary The Linux kernel compiled for <configuration>
#	%%kernel_variant_package [-n <pretty-name>] <subpackage>
#
%define kernel_variant_package(n:) \
%package %1\
Summary: %{variant_summary}\
Group: System Environment/Kernel\
%kernel_reqprovconf\
%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
%{expand:%%kernel_debuginfo_package %1}\
%{nil}


# First the auxiliary packages of the main kernel package.
%kernel_devel_package
%kernel_debuginfo_package


# Now, each variant package.

%define variant_summary The Linux kernel compiled for SMP machines
%kernel_variant_package -n SMP smp
%description smp
This package includes a SMP version of the Linux kernel. It is
required only on machines with two or more CPUs as well as machines with
hyperthreading technology.

Install the kernel-smp package if your machine uses two or more CPUs.


%define variant_summary The Linux kernel compiled for PAE capable machines
%kernel_variant_package PAE
%description PAE
This package includes a version of the Linux kernel with support for up to
64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
The non-PAE kernel can only address up to 4GB of memory.
Install the kernel-PAE package if your machine has more than 4GB of memory.


%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines
%kernel_variant_package PAEdebug
Obsoletes: kernel-PAE-debug
%description PAEdebug
This package includes a version of the Linux kernel with support for up to
64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
The non-PAE kernel can only address up to 4GB of memory.
Install the kernel-PAE package if your machine has more than 4GB of memory.

This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.


%define variant_summary The Linux kernel compiled with extra debugging enabled
%kernel_variant_package debug
%description debug
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system.  The kernel handles the basic functions
of the operating system:  memory allocation, process allocation, device
input and output, etc.

This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.

%define variant_summary The Linux kernel compiled for marvell kirkwood boards
%kernel_variant_package kirkwood
%description kirkwood
This package includes a version of the Linux kernel with support for
marvell kirkwood based systems, i.e., guruplug, sheevaplug

%define variant_summary The Linux kernel compiled for freescale boards
%kernel_variant_package imx
%description imx
This package includes a version of the Linux kernel with support for
freescale based systems, i.e., efika smartbook.

%define variant_summary The Linux kernel compiled for Calxeda boards
%kernel_variant_package highbank
%description highbank
This package includes a version of the Linux kernel with support for
Calxeda based systems, i.e., HP arm servers.

%define variant_summary The Linux kernel compiled for TI-OMAP boards
%kernel_variant_package omap
%description omap
This package includes a version of the Linux kernel with support for
TI-OMAP based systems, i.e., BeagleBoard-xM.

%define variant_summary The Linux kernel compiled for tegra boards
%kernel_variant_package tegra
%description tegra
This package includes a version of the Linux kernel with support for
nvidia tegra based systems, i.e., trimslice, ac-100.


%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}%{with_pae}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif

%if %{with_smponly}
%if !%{with_smp}
echo "Cannot build --with smponly, smp build is disabled"
exit 1
%endif
%endif

%if "%{baserelease}" == "0"
echo "baserelease must be greater than zero"
exit 1
%endif

# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
  for patch in %{patches} ; do
    if [ ! -f $patch ] ; then
      echo "ERROR: Patch  ${patch##/*/}  listed in specfile but is missing"
      exit 1
    fi
  done
fi 2>/dev/null

patch_command='patch -p1 -F1 -s'
ApplyPatch()
{
  local patch=$1
  shift
  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
    exit 1
  fi
%if !%{using_upstream_branch}
  if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then
    if [ "${patch:0:8}" != "patch-3." ] ; then
      echo "ERROR: Patch  $patch  not listed as a source patch in specfile"
      exit 1
    fi
  fi 2>/dev/null
%endif
  case "$patch" in
  *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *.gz)  gunzip  < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *.xz)  unxz    < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
  esac
}

# don't apply patch if it's empty
ApplyOptionalPatch()
{
  local patch=$1
  shift
  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
    exit 1
  fi
  local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
  if [ "$C" -gt 9 ]; then
    ApplyPatch $patch ${1+"$@"}
  fi
}

# we don't want a .config file when building firmware: it just confuses the build system
%define build_firmware \
   mv .config .config.firmware_save \
   make INSTALL_FW_PATH=$RPM_BUILD_ROOT/lib/firmware firmware_install \
   mv .config.firmware_save .config

# First we unpack the kernel tarball.
# If this isn't the first make prep, we use links to the existing clean tarball
# which speeds things up quite a bit.

# Update to latest upstream.
%if 0%{?released_kernel}
%define vanillaversion 3.%{base_sublevel}
# non-released_kernel case
%else
%if 0%{?rcrev}
%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}
%if 0%{?gitrev}
%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
%define vanillaversion 3.%{base_sublevel}-git%{gitrev}
%else
%define vanillaversion 3.%{base_sublevel}
%endif
%endif
%endif

# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3
# %%{kversion}       : the base version, e.g. 2.6.34

# Use kernel-%%{kversion}%%{?dist} as the top-level directory name
# so we can prep different trees within a single git directory.

# Build a list of the other top-level kernel tree directories.
# This will be used to hardlink identical vanilla subdirs.
sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-3.*' \
            | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||:

if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then

  if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then

    # The base vanilla version already exists.
    cd kernel-%{kversion}%{?dist}

    # Any vanilla-* directories other than the base one are stale.
    for dir in vanilla-*; do
      [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
    done

  else

    rm -f pax_global_header
    # Look for an identical base vanilla dir that can be hardlinked.
    for sharedir in $sharedirs ; do
      if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{kversion} ]] ; then
        break
      fi
    done
    if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{kversion} ]] ; then
%setup -q -n kernel-%{kversion}%{?dist} -c -T
      cp -rl $sharedir/vanilla-%{kversion} .
    else
%setup -q -n kernel-%{kversion}%{?dist} -c
      mv linux-%{kversion} vanilla-%{kversion}
    fi

  fi

%if "%{kversion}" != "%{vanillaversion}"

  for sharedir in $sharedirs ; do
    if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{vanillaversion} ]] ; then
      break
    fi
  done
  if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{vanillaversion} ]] ; then

    cp -rl $sharedir/vanilla-%{vanillaversion} .

  else

    # Need to apply patches to the base vanilla version.
    cp -rl vanilla-%{kversion} vanilla-%{vanillaversion}
    cd vanilla-%{vanillaversion}

# Update vanilla to the latest upstream.
# (non-released_kernel case only)
%if 0%{?rcrev}
    ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}.bz2
%if 0%{?gitrev}
    ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
    ApplyPatch patch-3.%{base_sublevel}-git%{gitrev}.bz2
%endif
%endif

    cd ..

  fi

%endif

else

  # We already have all vanilla dirs, just change to the top-level directory.
  cd kernel-%{kversion}%{?dist}

fi

# Now build the fedora kernel tree.
if [ -d linux-%{kversion}.%{_target_cpu} ]; then
  # Just in case we ctrl-c'd a prep already
  rm -rf deleteme.%{_target_cpu}
  # Move away the stale away, and delete in background.
  mv linux-%{kversion}.%{_target_cpu} deleteme.%{_target_cpu}
  rm -rf deleteme.%{_target_cpu} &
fi

cp -rl vanilla-%{vanillaversion} linux-%{kversion}.%{_target_cpu}

cd linux-%{kversion}.%{_target_cpu}

# released_kernel with possible stable updates
%if 0%{?stable_base}
ApplyPatch %{stable_patch_00}
%endif
%if 0%{?stable_rc}
ApplyPatch %{stable_patch_01}
%endif

%if %{using_upstream_branch}
### BRANCH APPLY ###
%endif

# Drop some necessary files from the source dir into the buildroot
cp $RPM_SOURCE_DIR/config-* .
cp %{SOURCE15} .

# Dynamically generate kernel .config files from config-* files
make -f %{SOURCE20} VERSION=%{version} configs

%if %{?all_arch_configs:1}%{!?all_arch_configs:0}
#if a rhel kernel, apply the rhel config options
%if 0%{?rhel}
  for i in %{all_arch_configs}
  do
    mv $i $i.tmp
    ./merge.pl config-rhel-generic $i.tmp > $i
    rm $i.tmp
  done
%endif

# Merge in any user-provided local config option changes
for i in %{all_arch_configs}
do
  mv $i $i.tmp
  ./merge.pl %{SOURCE1000} $i.tmp > $i
  rm $i.tmp
done
%endif

ApplyOptionalPatch git-linus.diff

ApplyPatch linux-2.6-makefile-after_link.patch

#
# misc small stuff to make things compile
#
ApplyOptionalPatch linux-2.6-compile-fixes.patch

%if !%{nopatches}

# revert patches from upstream that conflict or that we get via other means
ApplyOptionalPatch linux-2.6-upstream-reverts.patch -R


# Architecture patches
# x86(-64)

#
# ARM
#
# ApplyPatch arm-omap-dt-compat.patch
ApplyPatch arm-smsc-support-reading-mac-address-from-device-tree.patch

ApplyPatch taint-vbox.patch
#
# NX Emulation
#
ApplyPatch linux-2.6-32bit-mmap-exec-randomization.patch
ApplyPatch linux-2.6-i386-nx-emulation.patch
ApplyPatch nx-emu-remove-cpuinitdata-for-disable_nx-on-x86_32.patch

#
# bugfixes to drivers and filesystems
#

# ext4
#rhbz 753346
ApplyPatch jbd-jbd2-validate-sb-s_first-in-journal_get_superblo.patch

# xfs

# btrfs


# eCryptfs

# NFSv4
ApplyPatch NFSv4-Reduce-the-footprint-of-the-idmapper.patch
ApplyPatch NFSv4-Further-reduce-the-footprint-of-the-idmapper.patch

# USB

# WMI

# ACPI
ApplyPatch linux-2.6-defaults-acpi-video.patch
ApplyPatch linux-2.6-acpi-video-dos.patch
ApplyPatch linux-2.6-acpi-debug-infinite-loop.patch
ApplyPatch acpi-ensure-thermal-limits-match-cpu-freq.patch
ApplyPatch acpi-sony-nonvs-blacklist.patch

#
# PCI
#
# enable ASPM by default on hardware we expect to work
ApplyPatch linux-2.6-defaults-aspm.patch

#
# SCSI Bits.
#

# ACPI

# ALSA

# Networking


# Misc fixes
# The input layer spews crap no-one cares about.
ApplyPatch linux-2.6-input-kill-stupid-messages.patch

# stop floppy.ko from autoloading during udev...
ApplyPatch die-floppy-die.patch
ApplyPatch floppy-drop-disable_hlt-warning.patch

ApplyPatch linux-2.6.30-no-pcspkr-modalias.patch

# Allow to use 480600 baud on 16C950 UARTs
ApplyPatch linux-2.6-serial-460800.patch

# Silence some useless messages that still get printed with 'quiet'
ApplyPatch linux-2.6-silence-noise.patch

ApplyPatch silence-timekeeping-spew.patch

# Make fbcon not show the penguins with 'quiet'
ApplyPatch linux-2.6-silence-fbcon-logo.patch

# Changes to upstream defaults.


# /dev/crash driver.
ApplyPatch linux-2.6-crash-driver.patch

# Hack e1000e to work on Montevina SDV
ApplyPatch linux-2.6-e1000-ich9-montevina.patch

# crypto/

# Assorted Virt Fixes
ApplyPatch fix_xen_guest_on_old_EC2.patch

# DRM core
#ApplyPatch drm-edid-try-harder-to-fix-up-broken-headers.patch

# Intel DRM
ApplyOptionalPatch drm-intel-next.patch
ApplyPatch drm-i915-dp-stfu.patch
ApplyPatch drm-i915-fbc-stfu.patch

ApplyPatch linux-2.6-intel-iommu-igfx.patch

# silence the ACPI blacklist code
ApplyPatch linux-2.6-silence-acpi-blacklist.patch
ApplyPatch quite-apm.patch

# V4L/DVB updates/fixes/experimental drivers
#  apply if non-empty
ApplyOptionalPatch drivers-media-update.patch

# Patches headed upstream

ApplyPatch disable-i8042-check-on-apple-mac.patch

# rhbz#605888
ApplyPatch dmar-disable-when-ricoh-multifunction.patch

ApplyPatch efi-dont-map-boot-services-on-32bit.patch

# FIXME
#ApplyPatch hibernate-freeze-filesystems.patch
ApplyPatch hibernate-watermark.patch

ApplyPatch lis3-improve-handling-of-null-rate.patch

ApplyPatch bluetooth-use-after-free.patch

ApplyPatch ips-noirq.patch

# utrace.
ApplyPatch utrace.patch

#ApplyPatch pci-crs-blacklist.patch

ApplyPatch ext4-Support-check-none-nocheck-mount-options.patch

#rhbz 772772
ApplyPatch rt2x00_fix_MCU_request_failures.patch

#rhbz 754518
#ApplyPatch scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch

#rhbz 789644
ApplyPatch mcelog-rcu-splat.patch

#rhbz 727865 730007
ApplyPatch ACPICA-Fix-regression-in-FADT-revision-checks.patch

#rhbz 728478
ApplyPatch sony-laptop-Enable-keyboard-backlight-by-default.patch

#rhbz 804007
ApplyPatch mac80211-fix-possible-tid_rx-reorder_timer-use-after-free.patch

#rhbz 804957 CVE-2012-1568
ApplyPatch shlib_base_randomize.patch

ApplyPatch unhandled-irqs-switch-to-polling.patch

# debug patches
ApplyPatch weird-root-dentry-name-debug.patch
ApplyPatch debug-808990.patch

#rhbz 804347
ApplyPatch x86-add-io_apic_ops-to-allow-interception.patch
ApplyPatch x86-apic_ops-Replace-apic_ops-with-x86_apic_ops.patch
ApplyPatch xen-x86-Implement-x86_apic_ops.patch

#rhbz 770476
ApplyPatch iwlegacy-do-not-nulify-il-vif-on-reset.patch
ApplyPatch iwlwifi-do-not-nulify-ctx-vif-on-reset.patch

ApplyPatch nfs-Fix-length-of-buffer-copied-in-__nfs4_get_acl_uncached.patch

#rhbz 808207 CVE-2012-1601
ApplyPatch KVM-Ensure-all-vcpus-are-consistent-with-in-kernel-i.patch

#rhbz 806433
ApplyPatch uvcvideo-Fix-race-induced-crash-in-uvc_video_clock_update.patch

#rhbz 808603
ApplyPatch wimax-i2400m-prevent-a-possible-kernel-bug-due-to-mi.patch

#rhbz 806676 807632
ApplyPatch libata-disable-runtime-pm-for-hotpluggable-port.patch

# END OF PATCH APPLICATIONS

%endif

# Any further pre-build tree manipulations happen here.

chmod +x scripts/checkpatch.pl

# This Prevents scripts/setlocalversion from mucking with our version numbers.
touch .scmversion

# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches

mkdir configs

# Remove configs not for the buildarch
for cfg in kernel-%{version}-*.config; do
  if [ `echo %{all_arch_configs} | grep -c $cfg` -eq 0 ]; then
    rm -f $cfg
  fi
done

%if !%{debugbuildsenabled}
rm -f kernel-%{version}-*debug.config
%endif

# now run oldconfig over all the config files
for i in *.config
do
  mv $i .config
  Arch=`head -1 .config | cut -b 3-`
  make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true
%if %{listnewconfig_fail}
  if [ -s .newoptions ]; then
    cat .newoptions
    exit 1
  fi
%endif
  rm -f .newoptions
  make ARCH=$Arch oldnoconfig
  echo "# $Arch" > configs/$i
  cat .config >> configs/$i
done
# end of kernel config
%endif

# get rid of unwanted files resulting from patch fuzz
find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null

# remove unnecessary SCM files
find . -name .gitignore -exec rm -f {} \; >/dev/null

cd ..

###
### build
###
%build

%if %{with_sparse}
%define sparse_mflags	C=1
%endif

%if %{fancy_debuginfo}
# This override tweaks the kernel makefiles so that we run debugedit on an
# object before embedding it.  When we later run find-debuginfo.sh, it will
# run debugedit again.  The edits it does change the build ID bits embedded
# in the stripped object, but repeating debugedit is a no-op.  We do it
# beforehand to get the proper final build ID bits into the embedded image.
# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
export AFTER_LINK=\
'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
    				-i $@ > $@.id"'
%endif

cp_vmlinux()
{
  eu-strip --remove-comment -o "$2" "$1"
}

BuildKernel() {
    MakeTarget=$1
    KernelImage=$2
    Flavour=$3
    InstallName=${4:-vmlinuz}

    # Pick the right config file for the kernel we're building
    Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
    DevelDir=/usr/src/kernels/%{KVERREL}${Flavour:+.${Flavour}}

    # When the bootable image is just the ELF kernel, strip it.
    # We already copy the unstripped file into the debuginfo package.
    if [ "$KernelImage" = vmlinux ]; then
      CopyKernel=cp_vmlinux
    else
      CopyKernel=cp
    fi

    KernelVer=%{version}-%{release}.%{_target_cpu}${Flavour:+.${Flavour}}
    echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...

    %if 0%{?stable_update}
    # make sure SUBLEVEL is incremented on a stable release.  Sigh 3.x.
    perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile
    %endif

    # make sure EXTRAVERSION says what we want it to say
    perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flavour:+.${Flavour}}/" Makefile

    # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
    %if !0%{?rcrev}
    %if 0%{?gitrev}
    perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile
    %endif
    %endif

    # and now to start the build process

    make -s mrproper
    cp configs/$Config .config

    Arch=`head -1 .config | cut -b 3-`
    echo USING ARCH=$Arch

    make -s ARCH=$Arch oldnoconfig >/dev/null
    make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags}
    make -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1

    # Start installing the results
%if %{with_debuginfo}
    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/boot
    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif
    mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
    install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
    install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer

    # We estimate the size of the initramfs because rpm needs to take this size
    # into consideration when performing disk space calculations. (See bz #530778)
    dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20

    if [ -f arch/$Arch/boot/zImage.stub ]; then
      cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
    fi
    $CopyKernel $KernelImage \
    		$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer

    # hmac sign the kernel for FIPS
    echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
    ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;

    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
    # Override $(mod-fw) because we don't want it to install any firmware
    # We'll do that ourselves with 'make firmware_install'
    make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
%ifarch %{vdso_arches}
    make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
    if [ ! -s ldconfig-kernel.conf ]; then
      echo > ldconfig-kernel.conf "\
# Placeholder file, no vDSO hwcap entries used in this kernel."
    fi
    %{__install} -D -m 444 ldconfig-kernel.conf \
        $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
%endif

    # And save the headers/makefiles etc for building modules against
    #
    # This all looks scary, but the end result is supposed to be:
    # * all arch relevant include/ files
    # * all Makefile/Kconfig files
    # * all script/ files

    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
    # dirs for additional modules per module-init-tools, kbuild/modules.txt
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates

    # first copy everything
    cp --parents `find  -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    if [ -s Module.markers ]; then
      cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    fi
    # then drop all but the needed Makefiles/Kconfig files
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
    cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    if [ -d arch/$Arch/scripts ]; then
      cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
    fi
    if [ -f arch/$Arch/*lds ]; then
      cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
    fi
    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
%ifarch ppc ppc64
    cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
    if [ -d arch/%{asmarch}/include ]; then
      cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    fi
    cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include

    # Make sure the Makefile and version.h have a matching timestamp so that
    # external modules can be built
    touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/version.h
    touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/autoconf.h
    # Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
    cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf

%if %{fancy_debuginfo}
    if test -s vmlinux.id; then
      cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
    else
      echo >&2 "*** ERROR *** no vmlinux build ID! ***"
      exit 1
    fi
%endif

    #
    # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
    #
%if %{with_debuginfo}
    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
    cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
%endif

    find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames

    # mark modules executable so that strip-to-file can strip them
    xargs --no-run-if-empty chmod u+x < modnames

    # Generate a list of modules for block and networking.

    grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
    sed -n 's,^.*/\([^/]*\.ko\):  *U \(.*\)$,\1 \2,p' > drivers.undef

    collect_modules_list()
    {
      sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
      LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
    }

    collect_modules_list networking \
    			 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe'
    collect_modules_list block \
    			 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler'
    collect_modules_list drm \
    			 'drm_open|drm_init'
    collect_modules_list modesetting \
    			 'drm_crtc_init'

    # detect missing or incorrect license tags
    rm -f modinfo
    while read i
    do
      echo -n "${i#$RPM_BUILD_ROOT/lib/modules/$KernelVer/} " >> modinfo
      /sbin/modinfo -l $i >> modinfo
    done < modnames

    grep -E -v \
    	  'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \
	  modinfo && exit 1

    rm -f modinfo modnames

    # remove files that will be auto generated by depmod at rpm -i time
    for i in alias alias.bin builtin.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap
    do
      rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$i
    done

    # Move the devel headers out of the root file system
    mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
    mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir

    # This is going to create a broken link during the build, but we don't use
    # it after this point.  We need the link to actually point to something
    # when kernel-devel is installed, and a relative link doesn't work across
    # the F17 UsrMove feature.
    ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    # prune junk from kernel-devel
    find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \;

}

###
# DO it...
###

# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}

cd linux-%{kversion}.%{_target_cpu}

%if %{with_debug}
BuildKernel %make_target %kernel_image debug
%endif

%if %{with_pae_debug}
BuildKernel %make_target %kernel_image PAEdebug
%endif

%if %{with_pae}
BuildKernel %make_target %kernel_image PAE
%endif

%if %{with_kirkwood}
BuildKernel %make_target %kernel_image kirkwood
%endif

%if %{with_imx}
BuildKernel %make_target %kernel_image imx
%endif

%if %{with_highbank}
BuildKernel %make_target %kernel_image highbank
%endif

%if %{with_omap}
BuildKernel %make_target %kernel_image omap
%endif

%if %{with_tegra}
BuildKernel %make_target %kernel_image tegra
%endif

%if %{with_up}
BuildKernel %make_target %kernel_image
%endif

%if %{with_smp}
BuildKernel %make_target %kernel_image smp
%endif

%if %{with_tools}
# perf
make %{?_smp_mflags} -C tools/perf -s V=1 HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} all
make %{?_smp_mflags} -C tools/perf -s V=1 prefix=%{_prefix} man || %{doc_build_fail}

%ifarch %{cpupowerarchs}
# cpupower
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
make %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false
%ifarch %{ix86}
    cd tools/power/cpupower/debug/i386
    make %{?_smp_mflags} centrino-decode powernow-k8-decode
    cd -
%endif
%ifarch x86_64
    cd tools/power/cpupower/debug/x86_64
    make %{?_smp_mflags} centrino-decode powernow-k8-decode
    cd -
%endif
%endif
%endif

%if %{with_doc}
# Make the HTML and man pages.
make htmldocs mandocs || %{doc_build_fail}

# sometimes non-world-readable files sneak into the kernel source tree
chmod -R a=rX Documentation
find Documentation -type d | xargs chmod u+w
%endif

###
### Special hacks for debuginfo subpackages.
###

# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}

%if %{fancy_debuginfo}
%define __debug_install_post \
  /usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\
%{nil}
%endif

%if %{with_debuginfo}
%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%defattr(-,root,root)
%endif
%endif

###
### install
###

%install

cd linux-%{kversion}.%{_target_cpu}

%if %{with_doc}
docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}
man9dir=$RPM_BUILD_ROOT%{_datadir}/man/man9

# copy the source over
mkdir -p $docdir
tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir

# Install man pages for the kernel API.
mkdir -p $man9dir
find Documentation/DocBook/man -name '*.9.gz' -print0 |
xargs -0 --no-run-if-empty %{__install} -m 444 -t $man9dir $m
ls $man9dir | grep -q '' || > $man9dir/BROKEN
%endif # with_doc

# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.

%if %{with_headers}
# Install kernel headers
make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install

# Do headers_check but don't die if it fails.
make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_check \
     > hdrwarnings.txt || :
if grep -q exist hdrwarnings.txt; then
   sed s:^$RPM_BUILD_ROOT/usr/include/:: hdrwarnings.txt
   # Temporarily cause a build failure if header inconsistencies.
   # exit 1
fi

find $RPM_BUILD_ROOT/usr/include \
     \( -name .install -o -name .check -o \
     	-name ..install.cmd -o -name ..check.cmd \) | xargs rm -f

# glibc provides scsi headers for itself, for now
rm -rf $RPM_BUILD_ROOT/usr/include/scsi
rm -f $RPM_BUILD_ROOT/usr/include/asm*/atomic.h
rm -f $RPM_BUILD_ROOT/usr/include/asm*/io.h
rm -f $RPM_BUILD_ROOT/usr/include/asm*/irq.h
%endif

%if %{with_tools}
# perf tool binary and supporting scripts/binaries
make -C tools/perf -s V=1 DESTDIR=$RPM_BUILD_ROOT HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} install

# perf man pages (note: implicit rpm magic compresses them later)
make -C tools/perf  -s V=1 DESTDIR=$RPM_BUILD_ROOT HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} install-man || %{doc_build_fail}

%ifarch %{cpupowerarchs}
make -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
%ifarch %{ix86}
    cd tools/power/cpupower/debug/i386
    install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
    install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
    cd -
%endif
%ifarch x86_64
    cd tools/power/cpupower/debug/x86_64
    install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
    install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
    cd -
%endif
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
%endif

%endif

%if %{with_firmware}
%{build_firmware}
%endif

%if %{with_bootwrapper}
make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts
%endif


###
### clean
###

%clean
rm -rf $RPM_BUILD_ROOT

###
### scripts
###

%if %{with_tools}
%post -n kernel-tools
/sbin/ldconfig

%postun -n kernel-tools
/sbin/ldconfig
%endif

#
# This macro defines a %%post script for a kernel*-devel package.
#	%%kernel_devel_post [<subpackage>]
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
    . /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
then\
    (cd /usr/src/kernels/%{KVERREL}%{?1:.%{1}} &&\
     /usr/bin/find . -type f | while read f; do\
       hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
     done)\
fi\
%{nil}


# This macro defines a %%posttrans script for a kernel package.
#	%%kernel_variant_posttrans [<subpackage>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans() \
%{expand:%%posttrans %{?1}}\
/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --mkinitrd --dracut --depmod --update %{KVERREL}%{?-v:.%{-v*}} || exit $?\
/sbin/new-kernel-pkg --package kernel%{?1:-%{1}} --rpmposttrans %{KVERREL}%{?1:.%{1}} || exit $?\
%{nil}

#
# This macro defines a %%post script for a kernel package and its devel package.
#	%%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
%{expand:%%kernel_variant_posttrans %{?-v*}}\
%{expand:%%post %{?-v*}}\
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
   [ -f /etc/sysconfig/kernel ]; then\
  /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
%{expand:\
/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --install %{KVERREL}%{?-v:.%{-v*}} || exit $?\
}\
%{nil}

#
# This macro defines a %%preun script for a kernel package.
#	%%kernel_variant_preun <subpackage>
#
%define kernel_variant_preun() \
%{expand:%%preun %{?1}}\
/sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}%{?1:.%{1}} || exit $?\
%{nil}

%kernel_variant_preun
%kernel_variant_post -r kernel-smp

%kernel_variant_preun smp
%kernel_variant_post -v smp

%kernel_variant_preun PAE
%kernel_variant_post -v PAE -r (kernel|kernel-smp)

%kernel_variant_preun debug
%kernel_variant_post -v debug

%kernel_variant_post -v PAEdebug -r (kernel|kernel-smp)
%kernel_variant_preun PAEdebug

%kernel_variant_preun kirkwood
%kernel_variant_post -v kirkwood

%kernel_variant_preun imx
%kernel_variant_post -v imx

%kernel_variant_preun highbank
%kernel_variant_post -v highbank

%kernel_variant_preun omap
%kernel_variant_post -v omap

%kernel_variant_preun tegra
%kernel_variant_post -v tegra

if [ -x /sbin/ldconfig ]
then
    /sbin/ldconfig -X || exit $?
fi

###
### file lists
###

%if %{with_headers}
%files headers
%defattr(-,root,root)
/usr/include/*
%endif

%if %{with_firmware}
%files firmware
%defattr(-,root,root)
/lib/firmware/*
%doc linux-%{kversion}.%{_target_cpu}/firmware/WHENCE
%endif

%if %{with_bootwrapper}
%files bootwrapper
%defattr(-,root,root)
/usr/sbin/*
%{_libdir}/kernel-wrapper
%endif

# only some architecture builds need kernel-doc
%if %{with_doc}
%files doc
%defattr(-,root,root)
%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/*
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}
%{_datadir}/man/man9/*
%endif

%if %{with_tools}
%files -n kernel-tools -f cpupower.lang
%defattr(-,root,root)
%{_bindir}/perf
%dir %{_libexecdir}/perf-core
%{_libexecdir}/perf-core/*
%{_mandir}/man[1-8]/*

%ifarch %{cpupowerarchs}
%{_bindir}/cpupower
%ifarch %{ix86} x86_64
%{_bindir}/centrino-decode
%{_bindir}/powernow-k8-decode
%endif
%{_libdir}/libcpupower.so.0
%{_libdir}/libcpupower.so.0.0.0
%{_unitdir}/cpupower.service
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
%endif

%if %{with_debuginfo}
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
%defattr(-,root,root)
%endif

%ifarch %{cpupowerarchs}
%files -n kernel-tools-devel
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%endif
%endif

# This is %%{image_install_path} on an arch where that includes ELF files,
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}

#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
#	%%kernel_variant_files [-k vmlinux] <condition> <subpackage>
#
%define kernel_variant_files(k:) \
%if %{1}\
%{expand:%%files %{?2}}\
%defattr(-,root,root)\
/%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:.%{2}}\
/%{image_install_path}/.vmlinuz-%{KVERREL}%{?2:.%{2}}.hmac \
%attr(600,root,root) /boot/System.map-%{KVERREL}%{?2:.%{2}}\
/boot/config-%{KVERREL}%{?2:.%{2}}\
%dir /lib/modules/%{KVERREL}%{?2:.%{2}}\
/lib/modules/%{KVERREL}%{?2:.%{2}}/kernel\
/lib/modules/%{KVERREL}%{?2:.%{2}}/build\
/lib/modules/%{KVERREL}%{?2:.%{2}}/source\
/lib/modules/%{KVERREL}%{?2:.%{2}}/extra\
/lib/modules/%{KVERREL}%{?2:.%{2}}/updates\
%ifarch %{vdso_arches}\
/lib/modules/%{KVERREL}%{?2:.%{2}}/vdso\
/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:.%{2}}.conf\
%endif\
/lib/modules/%{KVERREL}%{?2:.%{2}}/modules.*\
%ghost /boot/initramfs-%{KVERREL}%{?2:.%{2}}.img\
%{expand:%%files %{?2:%{2}-}devel}\
%defattr(-,root,root)\
/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
%if %{with_debuginfo}\
%ifnarch noarch\
%if %{fancy_debuginfo}\
%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\
%else\
%{expand:%%files %{?2:%{2}-}debuginfo}\
%endif\
%defattr(-,root,root)\
%if !%{fancy_debuginfo}\
%if "%{elf_image_install_path}" != ""\
%{debuginfodir}/%{elf_image_install_path}/*-%{KVERREL}%{?2:.%{2}}.debug\
%endif\
%{debuginfodir}/lib/modules/%{KVERREL}%{?2:.%{2}}\
%{debuginfodir}/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
%endif\
%endif\
%endif\
%endif\
%{nil}


%kernel_variant_files %{with_up}
%kernel_variant_files %{with_smp} smp
%kernel_variant_files %{with_debug} debug
%kernel_variant_files %{with_pae} PAE
%kernel_variant_files %{with_pae_debug} PAEdebug
%kernel_variant_files %{with_kirkwood} kirkwood
%kernel_variant_files %{with_imx} imx
%kernel_variant_files %{with_highbank} highbank
%kernel_variant_files %{with_omap} omap
%kernel_variant_files %{with_tegra} tegra

# plz don't put in a version string unless you're going to tag
# and build.

%changelog
* Tue Apr 10 2012 Mauro Carvalho Chehab <mchehab@redhat.com>
- Update media tree to what's there at Kernel 3.4-rc2 + fixes for -rc3

* Thu Apr 05 2012 Dave Jones <davej@redhat.com>
- Better watermark the number of pages used by hibernation I/O (Bojan Smojver) (rhbz 785384)

* Wed Apr 04 2012 Josh Boyer <jwboyer@redhat.com> - 3.3.1-3
- Disable runtime PM for hotpluggable ATA ports (rhbz 806676 807632)
- Disable MID_PTI driver (rhbz 783561)
- Fix NULL pointer dereference in i2400m (rhbz 808603)

* Tue Apr 03 2012 Josh Boyer <jwboyer@redhat.com>
- Fix crash in uvc_video_clock_update from Laurent Pinchart (rhbz 806433)

* Mon Apr 02 2012 Dave Jones <davej@redhat.com> 3.3.1-2
- Disable CONFIG_DEBUG_PAGEALLOC in -debug builds again.

* Mon Apr 02 2012 Dave Jones <davej@redhat.com>
- Add patch to display more debug info for bug 808990.

* Mon Apr 02 2012 Dave Jones <davej@redhat.com> 3.3.1-1
- Linux 3.3.1

* Fri Mar 30 2012 Dave Jones <davej@redhat.com>
- Silence the timekeeping "Adjusting tsc more then 11%" spew. (rhbz 798600)

* Fri Mar 30 2012 Josh Boyer <jwboyer@redhat.com>
- Fix i915 fbdev cursor blink around suspend/hibernate from Dave Airlied
- CVE-2012-1601: kvm: NULL dereference from irqchip_in_kernel and
  vcpu->arch.apic inconsistency (rhbz 808207)
- Add patch to fix incorrect buffer length in __nfs4_get_acl_uncached

* Thu Mar 29 2012 Josh Boyer <jwboyer@redhat.com> - 3.3.0-8
- Drop __cpuinitdata on disable_nx for x86_32 (rhbz 808075)
- iwl{wifi,legacy}: Fix warnings on remove interface from Stanislaw Gruszka
  (rhbz 770467)

* Wed Mar 28 2012 Josh Boyer <jwboyer@redhat.com>
- Fix disabled ASPM regression

* Wed Mar 28 2012 Dave Jones <davej@redhat.com>
- Don't bind the IPS driver if no irq is assigned (typically BIOS bug). (rhbz 804353)

* Tue Mar 27 2012 Josh Boyer <jwboyer@redhat.com>
- Implement xen apic_ops to fix early crash in Xen Dom0 (rhbz 804347)
- Apply patch to fix MCE rcu splat (rhbz 789644)

* Fri Mar 23 2012 Dave Jones <davej@redhat.com>
- Apply patches that should solve the bluetooth use-after-free oopses. (rhbz 806033)

* Wed Mar 21 2012 Josh Boyer <jwboyer@redhat.com>
- Ship hmac file for vmlinuz for FIPS-140 (rhbz 805538)

* Tue Mar 20 2012 Josh Boyer <jwboyer@redhat.com>
- CVE-2012-1568: execshield: predictable ascii armour base address (rhbz 804957)
- mac80211: fix possible tid_rx->reorder_timer use after free
  from Stanislaw Gruska (rhbz 804007)

* Mon Mar 19 2012 Adam Jackson <ajax@redhat.com> - 3.3.0-2
- drm-i915-dp-stfu.patch: Muzzle a bunch of DP WARN()s.  They're not wrong,
  but they're not helpful at this point.

* Mon Mar 19 2012 Josh Boyer <jwboyer@redhat.com> - 3.3.0-1
- Linux 3.3
- Drop compat-wireless infrastructure in preparation for 3.3 rebase

* Fri Mar 16 2012 Justin M. Forbes <jforbes@redhat.com>
- re-enable threading on hibernate compression/decompression

* Fri Mar 16 2012 Josh Boyer <jwboyer@redhat.com>
- Fix irqpoll patch to really only apply for ASM108x machines (rhbz 800520)

* Thu Mar 15 2012 Justin M. Forbes <jforbes@redhat.com> - 3.2.10-3
- CVE-2012-1179 fix pmd_bad() triggering in code paths holding mmap_sem read mode (rhbz 803809)

* Wed Mar 14 2012 Josh Boyer <jwboyer@redhat.com>
- Fixup irqpoll patch to only activate on machines with ASM108x PCI bridge

* Wed Mar 14 2012 Steve Dickson <steved@redhat.com>
- Reduce the foot print of the NFSv4 idmapping coda (bz 593035)

* Mon Mar 12 2012 Josh Boyer <jwboyer@redhat.com> - 3.2.10-1
- Linux 3.2.10

* Mon Mar 12 2012 Josh Boyer <jwboyer@redhat.com> - 3.2.9-4
- Add patch to ignore bogus io-apic entries (rhbz 801501)

* Wed Mar 07 2012 Dave Jones <davej@redhat.com>
- Add debug patch for bugs 787171/766277

* Wed Mar 07 2012 Josh Boyer <jwboyer@redhat.com>
- CVE-2012-1146: memcg: unregister events attached to the same eventfd can
  oops (rhbz 800817)

* Mon Mar 05 2012 Josh Boyer <jwboyer@redhat.com>
- CVE-2012-1097 regset: Prevent null pointer reference on readonly regsets
- Add patch to fix BUG_ON mm->nr_ptes (rhbz 786632)

* Fri Mar 02 2012 Dave Jones <davej@redhat.com>
- Enable VM debugging in non-debug kernels too.

* Fri Mar 02 2012 Justin M. Forbes <jforbes@redhat.com> 
- Disable threading in hibernate compression/decompression

* Fri Mar 02 2012 Adam Jackson <ajax@redhat.com>
- drm-intel-crtc-dpms-fix.patch: Fix system hang on gen2 kit on DPMS (#730853)

* Thu Mar 01 2012 Dave Jones <davej@redhat.com>
- Temporarily enable CONFIG_DEBUG_PAGEALLOC in -debug builds to help track
  down some long-standing bugs.
  Note: This will make -debug builds even slower than normal.

* Thu Mar 01 2012 Dave Jones <davej@redhat.com>
- temporarily switch to low-performance polling IRQ mode when
  unexpected IRQs occur.

* Wed Feb 29 2012 Josh Boyer <jwboyer@redhat.com> 3.2.9-1
- Linux 3.2.9

* Tue Feb 28 2012 Josh Boyer <jwboyer@redhat.com> 3.2.8-3
- Add patch to enable keyboard backlight on Sony laptops (rhbz 728478)

* Tue Feb 28 2012 Justin M. Forbes <jforbes@redhat.com> 3.2.8-2
- CVE-2012-1090 CIFS: fix dentry refcount leak when opening a FIFO on lookup (rhbz 798296)

* Mon Feb 27 2012 Josh Boyer <jwboyer@redhat.com> 3.2.8-1
- Linux 3.2.8

* Mon Feb 27 2012 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix regression in FADT revision checks (rhbz 730007 727865)

* Fri Feb 24 2012 John W. Linville <linville@redhat.com>
- mac80211: call rate control only after init
- mac80211: do not call rate control .tx_status before .rate_init
- mwifiex: clear previous security setting during association
- ath9k: stop on rates with idx -1 in ath9k rate control's .tx_status
- ath9k_hw: prevent writes to const data on AR9160
- rt2x00: fix a possible NULL pointer dereference
- iwlwifi: fix key removal
- mac80211: zero initialize count field in ieee80211_tx_rate
- mac80211: Fix a warning on changing to monitor mode from STA
- brcm80211: smac: fix endless retry of A-MPDU transmissions
- brcm80211: smac: only print block-ack timeout message at trace level

* Mon Feb 20 2012 Dave Jones <davej@redhat.com> 3.2.7-1
- Do not call drivers when invalidating partitions for -ENOMEDIUM

* Mon Feb 20 2012 Dave Jones <davej@redhat.com>
- Linux 3.2.7

* Mon Feb 20 2012 Dave Jones <davej@redhat.com>
- NFSv4: Fix an Oops in the NFSv4 getacl code

* Fri Feb 17 2012 Dave Jones <davej@redhat.com>
- improve handling of null rate in LIS3LV02Dx accelerometer driver. (rhbz 785814)

* Fri Feb 17 2012 Dave Jones <davej@redhat.com>
- Reenable radio drivers. (rhbz 784824)

* Thu Feb 16 2012 Dave Jones <davej@redhat.com> 3.2.6-4
- Freeze all filesystems during system suspend/hibernate.

* Wed Feb 15 2012 Josh Boyer <jwboyer@redhat.com>
- Require newer linux-firmware for updated bnx2/bnx2x drivers

* Tue Feb 14 2012 Josh Boyer <jwboyer@redhat.com>
- Patch to enable CONFIG_KEYS_COMPAT on s390 from David Howells (rhbz 790367)

* Mon Feb 13 2012 Dave Jones <davej@redhat.com> 3.2.6-3
- Linux 3.2.6

* Mon Feb 13 2012 John W. Linville <linville@redhat.com>
- mwifiex: handle association failure case correctly
- ath9k: Fix kernel panic during driver initilization
- mwifiex: add NULL checks in driver unload path
- bcma: don't fail for bad SPROM CRC
- zd1211rw: firmware needs duration_id set to zero for non-pspoll frames
- mac80211: Fix a rwlock bad magic bug
- rtlwifi: Modify rtl_pci_init to return 0 on success

* Fri Feb 10 2012 Josh Boyer <jwboyer@redhat.com>
- Patch to prevent NULL pointer dereference in sd_revalidate_disk (rhbz 754518)

* Thu Feb 09 2012 Dave Jones <davej@redhat.com>
- bsg: fix sysfs link remove warning (#787862)

* Wed Feb 08 2012 Josh Boyer <jwboyer@redhat.com>
- Fix e1000e Tx hang check (rhbz 785806)
- CVE-2011-4086 jbd2: unmapped buffer with _Unwritten or _Delay flags set can
  lead to DoS (rhbz 788260)

* Tue Feb 07 2012 Josh Boyer <jwboyer@redhat.com>
- Make build/ point to /usr/src/kernels instead of being relative (rhbz 788125)

* Mon Feb 06 2012 Josh Boyer <jwboyer@redhat.com>
- Linux 3.2.5.  Happy Birthday

* Mon Feb 06 2012 John W. Linville <linville@redhat.com>
- ath9k: fix a WEP crypto related regression
- ath9k_hw: fix a RTS/CTS timeout regression

* Sun Feb 05 2012 Dave Jones <davej@redhat.com>
- Remove unnecessary block-stray-block-put-after-teardown.patch
- readahead: fix pipeline break caused by block plug

* Fri Feb 03 2012 Josh Boyer <jwboyer@redhat.com> 3.2.3-2
- Drop patch that was NAKed upstream (rhbz 783211)

* Fri Feb  3 2012 John W. Linville <linville@redhat.com>
- bcma: Fix mem leak in bcma_bus_scan()
- rt2800lib: fix wrong -128dBm when signal is stronger than -12dBm
- iwlwifi: make "Tx aggregation enabled on ra =" be at DEBUG level
- ssb: fix cardbus slot in hostmode
- mac80211: timeout a single frame in the rx reorder buffer

* Fri Feb 03 2012 Dave Jones <davej@redhat.com> 3.2.3-1
- Linux 3.2.3

* Fri Feb 03 2012 Josh Boyer <jwboyer@redhat.com>
- Patch from Jakub Kicinski to fix rt2x00 MCU requests (rhbz 772772)

* Wed Feb  1 2012 John W. Linville <linville@redhat.com>
- Use "iwlwifi: don't mess up QoS counters with non-QoS frames" (rhbz 785239)
- Actually apply patch to make integrated compat-wireless avoid taint...

* Tue Jan 31 2012 John W. Linville <linville@redhat.com>
- Apply iwlwifi patch for TID issue (rhbz 785239)

* Mon Jan 30 2012 Dave Jones <davej@redhat.com>
- Enable kmemleak (off by default) in kernel-debug (rhbz 782419)

* Mon Jan 30 2012 Dave Jones <davej@redhat.com>
- Restore the Savage DRM and several others that were accidentally
  early-deprecated.

* Mon Jan 30 2012 John W. Linville <linville@redhat.com>
- Use the eeprom_93cx6 driver from the compat-wireless package
- mac80211: fix debugfs key->station symlink
- brcmsmac: fix tx queue flush infinite loop
- mac80211: Use the right headroom size for mesh mgmt frames
- mac80211: fix work removal on deauth request
- b43: add option to avoid duplicating device support with brcmsmac
- mac80211: update oper_channel on ibss join
- mac80211: set bss_conf.idle when vif is connected
- iwlwifi: fix PCI-E transport "inta" race
- ath9k: use WARN_ON_ONCE in ath_rc_get_highest_rix

* Fri Jan 27 2012 John W. Linville <linville@redhat.com>
- Include config.mk from compat-wireless build in files for installation

* Wed Jan 25 2012 Josh Boyer <jwboyer@redhat.com> - 3.2.2-1
- Linux 3.2.2
- Add patch to invalidate parent cache when fsync is called on a partition 
  (rhbz 783211)
- Test fix for realtek_async_autopm oops from Stanislaw Gruszka (rhbz 784345)

* Wed Jan 25 2012 John W. Linville <linville@redhat.com>
- modpost: add option to allow external modules to avoid taint
- Make integrated compat-wireless take advantage of the above

* Wed Jan 25 2012 Josh Boyer <jwboyer@redhat.com>
- Backport patch to fix oops in rds (rhbz 718790)

* Tue Jan 24 2012 John W. Linville <linville@redhat.com>
- Update compat-wireless snapshot to version 3.3-rc1-2

* Tue Jan 24 2012 Josh Boyer <jwboyer@redhat.com>
- Re-enable the ARCMSR module (rhbz 784287)
- Add back a set of patches that were erroneously dropped during the rebase
- Re-enable the LIRC_STAGING drivers (rhbz 784398)

* Mon Jan 23 2012 Josh Boyer <jwboyer@redhat.com> 3.2.1-3
- Fix oops in iwlwifi/iwlagn driver (rhbz 766071)
- Fix NULL pointer dereference in sym53c8xx module (rhbz 781625)

* Fri Jan 20 2012 Dave Jones <davej@redhat.com>
- net: reintroduce missing rcu_assign_pointer() calls

* Fri Jan 20 2012 Josh Boyer <jwboyer@redhat.com>
- Add mac80211 deauth fix pointed out by Stanislaw Gruszka

* Thu Jan 19 2012 Dave Jones <davej@redhat.com> 3.2.1-1
- Rebase to Linux 3.2.1

* Thu Jan 19 2012 John W. Linville <linville@redhat.com>
- Pass the same make options to compat-wireless as to the base kernel

* Wed Jan 18 2012 Josh Boyer <jwboyer@redhat.com> 3.1.10-2
- Fix broken procfs backport (rhbz 782961)

* Wed Jan 18 2012 Josh Boyer <jwboyer@redhat.com> 3.1.10-1
- Linux 3.1.10
- /proc/pid/* information leak (rhbz 782686)
- CVE-2012-0056 proc: clean up and fix /proc/<pid>/mem (rhbz 782681)
- loop: prevent information leak after failed read (rhbz 782687)

* Tue Jan 17 2012 Josh Boyer <jwboyer@redhat.com>
- CVE-2011-4127 possible privilege escalation via SG_IO ioctl (rhbz 769911)

* Mon Jan 16 2012 John W. Linville <linville@redhat.com>
- Re-apply patch to revert mac80211 scan optimizations (rhbz #731365, #773271)

* Sun Jan 15 2012 Josh Boyer <jwboyer@redhat.com>
- Avoid packaging symlinks for kernel-doc files (rhbz 767351)
- Apply mac80211 NULL ptr deref fix to compat-wireless too (rhbz 769766)

* Fri Jan 13 2012 Josh Boyer <jwboyer@redhat.com>
- Fix verbose logging messages in the rtl8192cu driver (rhbz 728740)

* Fri Jan 13 2012 Josh Boyer <jwboyer@redhat.com> 3.1.9-1
- Linux 3.1.9
- CVE-2012-0045 kvm: syscall instruction induced guest panic (rhbz 773392)

* Wed Jan 11 2012 Josh Boyer <jwboyer@redhat.com>
- Patch from Stanislaw Gruszka to fix NULL ptr deref in mac80211 (rhbz 769766)

* Tue Jan 10 2012 John W. Linville <linville@redhat.com>
- Update compat-wireless snapshot to version 3.2-1

* Tue Jan 10 2012 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix ext4 compatibility with ext2 mount option (rhbz 770172)
- Fix ext4 corrupted bitmap error path (pointed out by Eric Sandeen)

* Sat Jan 07 2012 Josh Boyer <jwboyer@redhat.com> 3.1.8-2
- Add iwlwifi-allow-to-switch-to-HT40-if-not-associated.patch back to
  compat-wireless

* Fri Jan 06 2012 Josh Boyer <jwboyer@redhat.com> 3.1.8-1
- Disable backports on arches where we don't actually build a kernel (or config)
- Linux 3.1.8

* Thu Jan 05 2012 John W. Linville <linville@redhat.com>
- Patch compat-wireless build to avoid "pr_fmt redefined" warnings
- Include compat-wireless in removal of files resulting from patch fuzz

* Thu Jan 05 2012 Josh Boyer <jwboyer@redhat.com>
- Move the depmod file removal below the compat-wireless build to make sure we
  clean them all out

* Wed Jan 04 2012 Neil Horman <nhorman@redhat.com>
- Fix warning about msi sysfs refcount (bz 771058)

* Wed Jan 04 2012 Dave Jones <davej@redhat.com>
- Disable PCI CRS blacklist patch
- Try alternative approach from Bjorn Helgaas to work around
  MCFG quirks on some laptops.

* Wed Jan 04 2012 Dave Jones <davej@redhat.com>
- Add Dell Studio 1557 to pci=nocrs blacklist. (rhbz 769657)

* Wed Jan 04 2012 Josh Boyer <jwboyer@redhat.com>
- CVE-2011-4347 kvm: device assignment DoS (rhbz 771678)

* Tue Jan 03 2012 Josh Boyer <jwboyer@redhat.com> 3.1.7-1
- Linux 3.1.7

* Tue Jan 03 2012 John W. Linville <linville@redhat.com> 
- Avoid unnecessary modprobe invocations during compat-wireless build

* Tue Jan 03 2012 Dave Jones <davej@redhat.com>
- Add Thinkpad SL510 to the pci=nocrs blacklist.

* Tue Jan 03 2012 Josh Boyer <jwboyer@redhat.com>
- CVE-2011-4622 kvm: pit timer with no irqchip crashes the system (rhbz 771387)
- Add bluetooth support for BCM20102A0 (rhbz 770233)

* Tue Jan 03 2012 Dave Jones <davej@redhat.com>
- thp: reduce khugepaged freezing latency (rhbz 771006)

* Tue Jan  3 2012 John W. Linville <linville@redhat.com> 
- Re-enable CONFIG_RT2800PCI_RT53XX in compat-wireless build (rhbz #720594)

* Thu Dec 29 2011 Dave Jones <davej@redhat.com> 3.1.6-2
- Create a blacklist for pci=nocrs
  Add Dell Studio 1536 to it.

* Fri Dec 23 2011 Dennis Gilmore <dennis@ausil.us>
- build imx highbank and kirkwood kernels for arm

* Thu Dec 22 2011 John W. Linville <linville@redhat.com> 
- iwlwifi: do not set the sequence control bit is not needed
- ath9k: fix max phy rate at rate control init
- mwifiex: avoid double list_del in command cancel path
- iwlwifi: update SCD BC table for all SCD queues

* Wed Dec 21 2011 Dave Jones <davej@redhat.com> 3.1.6-1
- Linux 3.1.6

* Wed Dec 21 2011 John W. Linville <linville@redhat.com> 
- Apply some iwlwifi regression fixes not in the 3.2-rc6 wireless snapshot
- Turn-off with_backports for s390x

* Wed Dec 21 2011 Dave Jones <davej@redhat.com> 3.1.5-11
- Reinstate the route cache garbage collector.

* Wed Dec 21 2011 John W. Linville <linville@redhat.com> 
- Revise compat-wireless configuration
- Enable with-backports by default
- Update compat-wireless snaptshot from verstion 3.2-rc6-3

* Tue Dec 20 2011 Dave Jones <davej@redhat.com> 3.1.5-10
- Delay after aborting command in tpm_tis (rhbz #746097)

* Tue Dec 20 2011 Josh Boyer <jwboyer@redhat.com>
- Backport upstream fix for b44_poll oops (rhbz #741117)
- Include crtsaves.o for ppc64 as well (rhbz #769415)
- Drop EDID headers patch from 751589 for now (rhbz #769103)

* Mon Dec 19 2011 Kyle McMartin <kyle@redhat.com> - 3.1.5-8
- Add versioned Obsoletes and Provides for kernel-tools -> perf, hopefully
  this should allow upgrades from kernel-tools to perf+kernel-tools in rawhide
  from F-16.

* Mon Dec 19 2011 Dave Jones <davej@redhat.com>
- x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT

* Fri Dec 16 2011 Ben Skeggs <bskeggs@redhat.com> - 3.1.5-7
- Add patch to do a better job of dealing with busted EDID headers (rhbz#751589)

* Thu Dec 15 2011 Josh Boyer <jwboyer@redhat.com> - 3.1.5-6
- Add patch to fix Intel wifi regression in 3.1.5 (rhbz 767173)

* Thu Dec 15 2011 Dave Jones <davej@redhat.com> - 3.1.5-5
- Change configfs to be built-in. (rhbz 767857)

* Thu Dec 15 2011 Dave Jones <davej@redhat.com> - 3.1.5-4
- Disable Intel IOMMU by default.

* Tue Dec 13 2011 Josh Boyer <jwboyer@redhat.com>
- Remove extraneous settings and enable Radeon KMS for powerpc (via Will Woods)

* Mon Dec 12 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch from Jeff Layton to fix suspend with NFS (rhbz #717735)
- Backport ALPS touchpad patches from input/next branch (rhbz #590880)

* Fri Dec 09 2011 Josh Boyer <jwboyer@redhat.com> 3.1.5-1
- Linux 3.1.5

* Thu Dec 08 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.5-0.rc2.1
- Linux 3.1.5-rc2
- Drop obsolete changelog, set rcrev and gitrev to 0 so they're
  less distracting.
- Fix wrong link speed on some sky2 network adapters (rhbz #757839)

* Thu Dec 08 2011 Ben Skeggs <bskeggs@redhat.com> 3.1.5-0.rc1.2
- nouveau: fix accel on GF108 and enable on GF108/GF110

* Wed Dec 07 2011 Chuck Ebbert <cebbert@redhat.com>
- Linux 3.1.5-rc1
- Comment out merged patches:
  xfs-Fix-possible-memory-corruption-in-xfs_readlink.patch
  rtlwifi-fix-lps_lock-deadlock.patch

* Tue Dec 06 2011 Chuck Ebbert <cebbert@redhat.com>
- Disable uas until someone can fix it (rhbz #717633)

* Tue Dec 06 2011 Josh Boyer <jwboyer@redhat.com>
- Add reworked pci ASPM patch from Matthew Garrett

* Mon Dec 05 2011 Josh Boyer <jwboyer@redhat.com>
- Only print the apm_cpu_idle message once (rhbz #760341)

* Mon Dec 05 2011 Dave Jones <davej@redhat.com>
- Switch from -Os to -O2

* Thu Dec 01 2011 Josh Boyer <jwboyer@redhat.com>
- Apply patch to revert mac80211 scan optimizations (rhbz #731365)
- Disable the existing brcm80211 staging drivers (rhbz #759109)

* Wed Nov 30 2011 Josh Boyer <jwboyer@redhat.com>
- Include commit 3940d6185 from JJ Ding in elantech.patch

* Tue Nov 29 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix deadlock in rtlwifi (rhbz #755154)
- Drop drm-intel-make-lvds-work.patch (rhbz #731296)

* Mon Nov 28 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.4-1
- Linux 3.1.4

* Mon Nov 28 2011 Chuck Ebbert <cebbert@redhat.com>
- Fix IRQ error preventing load of cciss module (rhbz#754907)

* Mon Nov 28 2011 Ben Skeggs <bskeggs@redhat.com> 3.1.3-2
- nouveau: fix two instances of an oops in ttm clear() (rhbz#751753)

* Sun Nov 27 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.3-1
- Linux 3.1.3

* Wed Nov 23 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.3-0.rc1.1
- Linux 3.1.3-rc1
- Comment out merged patches:
  usb-add-quirk-for-logitech-webcams.patch
  ip6_tunnel-copy-parms.name-after-register_netdevice.patch

* Tue Nov 22 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.2-1
- Linux 3.1.2

* Sat Nov 19 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.2-0.rc1.1
- Linux 3.1.2-rc1

* Wed Nov 16 2011 John W. Linville <linville@redhat.com>
- Add compat-wireless as an option for kernel build

* Tue Nov 15 2011 Dave Jones <davej@redhat.com>
- mm: Do not stall in synchronous compaction for THP allocations

* Tue Nov 15 2011 Dave Jones <davej@redhat.com>
- Backport asus-laptop changes from 3.2 (rhbz 754214)

* Mon Nov 14 2011 Josh Boyer <jwboyer@redhat.com>
- Patch from Joshua Roys to add rtl8192* to modules.networking (rhbz 753645)
- Add patch for wacom tablets for Bastien Nocera (upstream 3797ef6b6)
- Add patch to fix ip6_tunnel naming (rhbz 751165)
- Quite warning in apm_cpu_idle (rhbz 753776)

* Mon Nov 14 2011 Josh Boyer <jwboyer@redhat.com> 3.1.1-2
- CVE-2011-4131: nfs4_getfacl decoding kernel oops (rhbz 753236)
- CVE-2011-4132: jbd/jbd2: invalid value of first log block leads to oops (rhbz 753346)

* Fri Nov 11 2011 Chuck Ebbert <cebbert@redhat.com>
- Use the same naming scheme as rawhide for -stable RC kernels
  (e.g. 3.1.1-0.rc1.1 instead of 3.1.1-1.rc1)

* Fri Nov 11 2011 Josh Boyer <jwboyer@redhat.com> 3.1.1-1
- Linux 3.1.1

* Fri Nov 11 2011 John W. Linville <linville@redhat.com>
- Remove overlap between bcma/b43 and brcmsmac and reenable bcm4331

* Thu Nov 10 2011 Chuck Ebbert <cebbert@redhat.com>
- Sync samsung-laptop driver with what's in 3.2 (rhbz 747560)

* Wed Nov 09 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.1-1.rc1
- Linux 3.1.1-rc1
- Comment out merged patches, will drop when release is final:
   ums-realtek-driver-uses-stack-memory-for-DMA.patch
   epoll-fix-spurious-lockdep-warnings.patch
   crypto-register-cryptd-first.patch
   add-macbookair41-keyboard.patch
   powerpc-Fix-deadlock-in-icswx-code.patch
   iwlagn-fix-ht_params-NULL-pointer-dereference.patch
   mmc-Always-check-for-lower-base-frequency-quirk-for-.patch
   media-DiBcom-protect-the-I2C-bufer-access.patch
   media-dib0700-protect-the-dib0700-buffer-access.patch
   WMI-properly-cleanup-devices-to-avoid-crashes.patch
   mac80211-fix-remain_off_channel-regression.patch
   mac80211-config-hw-when-going-back-on-channel.patch

* Wed Nov 09 2011 John W. Linville <linville@redhat.com>
- Backport brcm80211 from 3.2-rc1

* Tue Nov 08 2011 Neil Horman <nhorman@redhat.com>
- Add msi irq ennumeration per device in sysfs (rhbz 752176)

* Mon Nov 07 2011 Josh Boyer <jwboyer@redhat.com>
- Add two patches to fix mac80211 issues (rhbz 731365)

* Thu Nov 03 2011 Josh Boyer <jwboyer@redhat.com>
- Add commits queued for 3.2 for elantech driver (rhbz 728607)
- Fix crash when setting brightness via Fn keys on ideapads (rhbz 748210)

* Wed Nov 02 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix oops when removing wmi module (rhbz 706574)

* Tue Nov 01 2011 Dave Jones <davej@redhat.com> 3.1.0-8
- allow building the perf rpm for ARM (rhbz 741325)

* Tue Nov 01 2011 Dave Jones <davej@redhat.com> 3.1.0-8
- Add another Sony laptop to the nonvs blacklist. (rhbz 641789)

* Tue Nov  1 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-7
- Drop x86-efi-Calling-__pa-with-an-ioremap-address-is-invalid (rhbz 748516)

* Mon Oct 31 2011 Josh Boyer <jwboyer@redhat.com>
- CVE-2011-4097: oom_badness() integer overflow (rhbz 750402)

* Fri Oct 28 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to prevent tracebacks on a warning in floppy.c (rhbz 749887)

* Wed Oct 26 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-5
- Rebuilt for glibc bug#747377

* Wed Oct 26 2011 Josh Boyer <jwboyer@redhat.com>
- CVE-2011-4077: xfs: potential buffer overflow in xfs_readlink() (rhbz 749166)

* Tue Oct 25 2011 Josh Boyer <jwboyer@redhat.com>
- CVE-2011-3347: be2net: promiscuous mode and non-member VLAN packets DoS (rhbz 748691)
- CVE-2011-1083: excessive in kernel CPU consumption when creating large nested epoll structures (rhbz 748668)

* Mon Oct 24 2011 Josh Boyer <jwboyer@redhat.com>
- Backport 3 fixed from linux-next to fix dib0700 playback (rhbz 733827)

* Mon Oct 24 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-1
- Linux 3.1

* Fri Oct 21 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc10.git1.1
- Update to upstream HEAD (v3.1-rc10-42-g2efd7c0)

* Fri Oct 21 2011 Dave Jones <davej@redhat.com>
- Lower severity of Radeon lockup messages.

* Wed Oct 19 2011 Dave Jones <davej@redhat.com>
- Add Sony VGN-FW21E to nonvs blacklist. (rhbz 641789)

* Wed Oct 19 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc10.git0.1
- Fix divide-by-zero in nouveau driver (rhbz #747129)

* Tue Oct 18 2011 Chuck Ebbert <cebbert@redhat.com>
- Fix lock inversion causing hangs in 3.1-rc9 (rhbz #746485)
- Linux 3.1-rc10

* Tue Oct 18 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix invalid EFI remap calls from Matt Fleming

* Mon Oct 17 2011 Josh Boyer <jwboyer@redhat.com>
- Add two patches to fix stalls in khugepaged (rhbz 735946)

* Thu Oct 13 2011 Josh Boyer <jwboyer@redhat.com>
- Update usb-add-quirk-for-logitech-webcams.patch with C600 ID (rhbz 742010)

* Thu Oct 13 2011 Adam Jackson <ajax@redhat.com>
- drm/i915: Treat SDVO LVDS as digital when parsing EDID (#729882)

* Thu Oct 13 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch from Stanislaw Gruszka to fix iwlagn NULL dereference (rhbz 744155)

* Tue Oct 11 2011 Josh Boyer <jwboyer@redhat.com>
- Disable CONFIG_XEN_BALLOON_MEMORY_HOTPLUG (rhbz 744408)

* Thu Oct 06 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix base frequency check for Ricoh e823 devices (rhbz 722509)

* Thu Oct 06 2011 Dave Jones <davej@redhat.com>
- Taint if virtualbox modules have been loaded.

* Wed Oct 05 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc9.git0.0
- Linux 3.1-rc9

* Mon Oct 03 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc8.git0.1
- block: Free queue resources at blk_release_queue()

* Thu Sep 29 2011 Chuck Ebbert <cebbert@redhat.com>
- Require grubby >= 8.3-1 so initrd line gets added (rhbz #725185)

* Thu Sep 29 2011 Josh Boyer <jwboyer@redhat.com>
- Update logitech USB quirk patch

* Tue Sep 27 2011 Chuck Ebbert <cebbert@redhat.com> 3.1.0-0.rc8.git0.0
- Linux 3.1-rc8
- New option: CONFIG_ARM_ERRATA_764369 is not set
- Fix up utrace.patch to apply after commit f9d81f61c

* Thu Sep 22 2011 Dave Jones <davej@redhat.com>
- Make CONFIG_XEN_PLATFORM_PCI=y (rhbz 740664)

* Thu Sep 22 2011 Dennis Gilmore <dennis@ausil.us>
- build vmlinux image for sparc64

* Wed Sep 21 2011 Josh Boyer <jwboyer@redhat.com>
- Linux 3.1-rc7

* Tue Sep 20 2011 Dave Jones <davej@redhat.com>
- Limit 32-bit x86 kernels to 32 processors.

* Tue Sep 20 2011 Ben Skeggs <bskeggs@redhat.com> 3.1.0-0.rc6.git0.4.fc16
- nouveau: patch in updates queued for 3.2, mostly new hw support (GF116/GF119)

* Fri Sep 16 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc6.git0.3.fc16
- Add patch to fix deadlock in ipw2x00 (rhbz 738387)
- Fixup kernel-tools file section for ppc/ppc64

* Thu Sep 15 2011 Josh Boyer <jwboyer@redhat.com>
- CVE-2011-3191: cifs: fix possible memory corruption in CIFSFindNext

* Wed Sep 14 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix deadlock in ppc64 icswx (rhbz 737984)

* Wed Sep 14 2011 Neil Horman <nhorman@redhat.com>
- Enable CONFIG_IP_VS_IPV6 (bz 738194)

* Wed Sep 14 2011 Josh Boyer <jwboyer@redhat.com>
- Add support for Macbook Air 4,1 keyboard, trackpad, and bluetooth
- Add patch to fix HVCS on ppc64 (rhbz 738096)
- Add various ibmveth driver fixes (rhbz 733766)

* Tue Sep 13 2011 Adam Jackson <ajax@redhat.com>
- drm/i915: Shut the fbc messages up when drm.debug & 4

* Mon Sep 12 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc6.git0.0
- Linux 3.1-rc6 (contains the fix for 737076)
- Disable debug builds

* Fri Sep 09 2011 Josh Boyer <jwboyer@redhat.com>
- Change to 64K page size for ppc64 kernels (rhbz 736751)

* Fri Sep 09 2011 Josh Boyer <jwboyer@redhat.com> 3.1.0-0.rc5.git0.0
- Linux 3.1-rc5

* Wed Sep 07 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix oops when linking entities in ucvideo (rhbz 735437)

* Fri Sep 02 2011 Dave Jones <davej@redhat.com>
- Apply patch to fix lockdep reports from ext4 (rhbz 732572)

* Thu Sep 01 2011 Dave Jones <davej@redhat.com>
- utrace: s390: fix the compile problem with traps.c (rhbz 735118)

* Tue Aug 30 2011 Dave Jones <davej@redhat.com>
- Revert "x86: Serialize EFI time accesses on rtc_lock" (rhbz 732755)

* Tue Aug 30 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix rhbz 606017

* Mon Aug 29 2011 Josh Boyer <jwboyer@redhat.com>
- Linux 3.1-rc4

* Sat Aug 27 2011 Dave Jones <davej@redhat.com>
- Fix get_gate_vma usage in i386 NX emulation
- Bring back the 32bit mmap randomization patch for now.
  NX emulation is still too dependant upon it.

* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
- Enable CONFIG_DETECT_HUNG_TASK for debug builds & rawhide.

* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
- Drop linux-2.6-debug-vm-would-have-oomkilled.patch
  The oom-killer heuristics have improved enough that this should
  never be necessary (and it probably doesn't dtrt any more)

* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
- Drop linux-2.6-32bit-mmap-exec-randomization.patch
  Outlived it's usefulness (and made of ugly)

* Fri Aug 26 2011 Dave Jones <davej@redhat.com>
- Drop acpi-ec-add-delay-before-write.patch (rhbz 733690)

* Fri Aug 26 2011 Josh Boyer <jwboyer@redhat.com>
- Linux 3.1-rc3-git5

* Wed Aug 24 2011 Josh Boyer <jwboyer@redhat.com>
- Revert 'iwlwifi: advertise max aggregate size'. (rhbz 708747)

* Mon Aug 22 2011 Josh Boyer <jwboyer@redhat.com>
- Linux 3.1-rc3
- Add patch to fix duplicate backlight registration (rhbz 732202)

* Mon Aug 22 2011 Dave Jones <davej@redhat.com>
- Avoid false quiescent states in rcutree with CONFIG_RCU_FAST_NO_HZ. (rhbz 577968)

* Sat Aug 20 2011 Josh Boyer <jwboyer@redhat.com>
- Linux 3.1-rc2-git7
- Add a provides/obsoletes for cpupowerutils-devel

* Fri Aug 19 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch from upstream to fix 64-bit divide error in btrfs
- Add BuildRequires on gettext for cpupowerutils translations

* Fri Aug 19 2011 Josh Boyer <jwboyer@redhat.com>
- Linux 3.1-rc2-git5
- Change XHCI to builtin (rhbz 731706)
- Add patch to fix race between cryptd and aesni (rhbz 721002)

* Thu Aug 18 2011 Josh Boyer <jwboyer@redhat.com>
- Adjust provides/obsoletes to replace the cpupowerutils package

* Wed Aug 17 2011 Josh Boyer <jwboyer@redhat.com>
- Create the kernel-tools subpackages based on a start by davej

* Tue Aug 16 2011 Dave Jones <davej@redhat.com>
- Prepare for packaging more of tools/ by renaming 'perf' subpackage
  to kernel-tools

* Tue Aug 16 2011 Dennis Gilmore <dennis@ausil.us>
- add config for arm tegra devices
- setup kernel to build omap image (patch from David Marlin)
- setup kernel to build tegra image based on omap work
- add arm device tree patches

* Sat Aug 13 2011 Dave Jones <davej@redhat.com>
- CPU_FREQ drivers should now be built-in on x86-64.

* Thu Aug 11 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch davej applied to f15 for rhbz 729340
- Add munged together patch for rhbz 729269
- Build ide_pmac as a module (rhbz 730039)

* Tue Aug 09 2011 Josh Boyer <jwboyer@redhat.com>
- Add Makefile.config and ARM config changes from David Marlin

* Tue Aug 09 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch davej applied to f15 for rhbz 728872

* Tue Aug 09 2011 Dave Jones <davej@redhat.com>
- ptrace_report_syscall: check if TIF_SYSCALL_EMU is defined

* Tue Aug 09 2011 Dave Jones <davej@redhat.com>
- Enable CONFIG_SAMSUNG_LAPTOP (rhbz 729363)

* Mon Aug 08 2011 Josh Boyer <jwboyer@redhat.com>
- Bring in utrace fixes davej applied to f15. (rhbz 728379)

* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
- Adjust Makefile munging for new 3.x numbering scheme

* Fri Aug 05 2011 Dave Jones <davej@redhat.com>
- Deselect CONFIG_DECNET. Unmaintained, and rubbish.

* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
- 3.0.1

* Fri Aug 05 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch for rhbz 726701 from Matthew Garrett

* Thu Aug 04 2011 Dave Jones <davej@redhat.com>
- Drop neuter_intel_microcode_load.patch (rhbz 690930)

* Wed Aug 03 2011 John W. Linville <linville@redhat.com>
- Disable CONFIG_BCMA since no driver currently uses it (rhbz 727796)

* Wed Aug 03 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix backtrace in cdc_ncm driver (rhbz 720128)
- Add patch to fix backtrace in usm-realtek driver (rhbz 720054)

* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix HFSPlus filesystem mounting (rhbz 720771)

* Tue Aug 02 2011 Dave Jones <davej@redhat.com>
- Change USB_SERIAL_OPTION back to modular. (rhbz 727680)

* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
- Fix epoll recursive lockdep warnings (rhbz 722472)
- Turn debug builds back on

* Tue Aug 02 2011 Josh Boyer <jwboyer@redhat.com>
- Add change from Yanko Kaneti to get the rt2x00 drivers in modules.networking
  (rhbz 708314)

* Fri Jul 29 2011 Dave Jones <davej@redhat.com>
- Fix scsi_dispatch_cmd oops (USB eject problems, etc).

* Thu Jul 28 2011 Dave Jones <davej@redhat.com>
- module-init-tools needs to be a prereq, not a conflict.

* Thu Jul 28 2011 Josh Boyer <jwboyer@redhat.com>
- Backport patch to correct udlfb removal events (rhbz 726163)

* Wed Jul 27 2011 Dave Jones <davej@redhat.com>
- Turn off debug builds.

* Fri Jul 22 2011 Dave Jones <davej@redhat.com>
- bootwrapper needs objcopy. Add it to requires: (wwoods)

* Fri Jul 22 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0.0-1
- Linux 3.0, but really 3.0.0 (sigh)

* Thu Jul 21 2011 Chuck Ebbert <cebbert@redhat.com>  3.0-0.rc7.git10.1
- 3.0-rc7-git10
- Use ext4 for ext2 and ext3 filesystems (CONFIG_EXT4_USE_FOR_EXT23=y)

* Thu Jul 21 2011 Dave Jones <davej@redhat.com>
- Switch BLK_DEV_RAM to be modular (rhbz 720833)

* Wed Jul 20 2011 Chuck Ebbert <cebbert@redhat.com> 3.0-0.rc7.git8.1
- 3.0-rc7-git8

* Fri Jul 15 2011 Dave Jones <davej@redhat.com> 3.0-0.rc7.git3.1
- 3.0-rc7-git3

* Fri Jul 15 2011 Dave Jones <davej@redhat.com>
- Bring back utrace until uprobes gets merged upstream.

* Wed Jul 13 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc7.git1.1
- Update to snapshot 3.0-rc7-git1 for intel drm fixes.

* Tue Jul 12 2011 John W. Linville <linville@redhat.com>
- zd1211rw: fix invalid signal values from device (rhbz 720093)

* Tue Jul 12 2011 John W. Linville <linville@redhat.com>
- rt2x00: Add device ID for RT539F device. (rhbz 720594)

* Tue Jul 12 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc7.git0.1
- Linux 3.0-rc7, hopefully the last before the Great Renumbering becomes
  official.

* Mon Jul 11 2011 Dave Jones <davej@redhat.com>
- Change BINFMT_MISC to be modular. (rhbz 695415)

* Sun Jul 10 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc6.git6.1
- Linux 3.0-rc6-git6
- iwlagn-fix-dma-direction.patch: drop.
- Revert CONFIG_X86_RESERVE_LOW=640, it breaks booting on x86_64.

* Thu Jul 07 2011 Dave Jones <davej@redhat.com>
- Centralise CPU_FREQ options into config-generic.
  Switch to using ondemand by default. (rhbz 713572)

* Wed Jul 06 2011 Chuck Ebbert <cebbert@redhat.com>
- Set CONFIG_X86_RESERVE_LOW=640 as requested by mjg

* Mon Jul 04 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc6.git0.1
- Linux 3.0-rc6
- [generic] SCSI_ISCI=m, because why not

* Sat Jul 02 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc5.git5.1
- Linux 3.0-rc5-git5

* Mon Jun 27 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc5.git0.1
- Linux 3.0-rc5

* Mon Jun 27 2011 Dave Jones <davej@redhat.com>
- Disable CONFIG_CRYPTO_MANAGER_DISABLE_TESTS, as this also disables FIPS (rhbz 716942)

* Thu Jun 23 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git3.1
- Linux 3.0-rc4-git3
- Drop linux-3.0-fix-uts-release.patch, and instead just perl the Makefile
- linux-2.6-silence-noise.patch: fix context
- iwlagn-fix-dma-direction.patch: fix DMAR errors (for me at least)

* Wed Jun 22 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git0.2
- Re-enable debuginfo generation. Thanks to Richard Jones for noticing... no
  wonder builds had been so quick lately.

* Tue Jun 21 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc4.git0.1
- Linux 3.0-rc4 (getting closer...)

* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git6.1
- Update to 3.0-rc3-git6

* Fri Jun 17 2011 Dave Jones <davej@redhat.com>
- drop qcserial 'compile fix' that was just duplicating an include.
- drop struct sizeof debug patch. (no real value. not upstreamable)
- drop linux-2.6-debug-always-inline-kzalloc.patch.
  Can't recall why this was added. Can easily re-add if deemed necessary.

* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com>
- linux-2.6-defaults-pci_no_msi.patch: drop, haven't toggled the default
  in many moons.
- linux-2.6-defaults-pci_use_crs.patch: ditto.
- linux-2.6-selinux-mprotect-checks.patch: upstream a while ago.
- drm-i915-gen4-has-non-power-of-two-strides.patch: drop buggy bugfix
- drop some more unapplied crud.
- We haven't applied firewire patches in a dogs age.

* Fri Jun 17 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git5.1
- Try updating to a git snapshot for the first time in 3.0-rc,
  update to 3.0-rc3-git5
- Fix a subtle bug I introduced in 3.0-rc1, "patch-3." is 9 letters, not 10.

* Thu Jun 16 2011 Kyle McMartin <kmcmartin@redhat.com>
- Disable mm patches which had been submitted against 2.6.39, as Rik reports
  they seem to aggravate a VM_BUG_ON. More investigation is necessary.

* Wed Jun 15 2011 Kyle McMartin <kmcmartin@redhat.com>
- Conflict with pre-3.2.1-5 versions of mdadm. (#710646)

* Wed Jun 15 2011 Kyle McMartin <kmcmartin@redhat.com>
- Build in aesni-intel on i686 for symmetry with 64-bit.

* Tue Jun 14 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc3.git0.3
- Fix libdm conflict (whose bright idea was it to give subpackages differing
  version numbers?)

* Tue Jun 14 2011 Kyle McMartin <kmcmartin@redhat.com>
- Update to 3.0-rc3, add another conflicts to deal with 2 digit
  versions (libdm.)
- Simplify linux-3.0-fix-uts-release.patch now that SUBLEVEL is optional.
- revert-ftrace-remove-unnecessary-disabling-of-irqs.patch: drop upstreamed
  patch.
- drm-intel-eeebox-eb1007-quirk.patch: ditto.
- ath5k-disable-fast-channel-switching-by-default.patch: ditto.

* Thu Jun 09 2011 Kyle McMartin <kmcmartin@redhat.com>
- ath5k-disable-fast-channel-switching-by-default.patch (rhbz#709122)
  (korgbz#34992) [a99168ee in wireless-next]

* Thu Jun 09 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc2.git0.2
- rhbz#710921: revert-ftrace-remove-unnecessary-disabling-of-irqs.patch

* Wed Jun 08 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc2.git0.1
- Update to 3.0-rc2, rebase utsname fix.
- Build IPv6 into the kernel for a variety of reasons
  (http://lists.fedoraproject.org/pipermail/kernel/2011-June/003105.html)

* Mon Jun 06 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.3
- Conflict with module-init-tools older than 3.13 to ensure the
  3.0 transition is handled correctly.

* Wed Jun 01 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.2
- Fix utsname for 3.0-rc1

* Mon May 30 2011 Kyle McMartin <kmcmartin@redhat.com> 3.0-0.rc1.git0.1
- Linux 3.0-rc1 (won't build until module-init-tools gets an update.)

* Mon May 30 2011 Kyle McMartin <kyle@redhat.com>
- Trimmed changelog, see fedpkg git for earlier history.

###
# The following Emacs magic makes C-c C-e use UTC dates.
# Local Variables:
# rpm-change-log-uses-utc: t
# End:
###