kernel/mac80211_offchannel_rework_revert.patch

595 lines
20 KiB
Diff
Raw Normal View History

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 9fab144..4f8cf7f 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -694,6 +694,8 @@ struct tpt_led_trigger {
* well be on the operating channel
* @SCAN_HW_SCANNING: The hardware is scanning for us, we have no way to
* determine if we are on the operating channel or not
+ * @SCAN_OFF_CHANNEL: We're off our operating channel for scanning,
+ * gets only set in conjunction with SCAN_SW_SCANNING
* @SCAN_COMPLETED: Set for our scan work function when the driver reported
* that the scan completed.
* @SCAN_ABORTED: Set for our scan work function when the driver reported
@@ -702,6 +704,7 @@ struct tpt_led_trigger {
enum {
SCAN_SW_SCANNING,
SCAN_HW_SCANNING,
+ SCAN_OFF_CHANNEL,
SCAN_COMPLETED,
SCAN_ABORTED,
};
@@ -1197,14 +1200,10 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata);
void ieee80211_sched_scan_stopped_work(struct work_struct *work);
/* off-channel helpers */
-bool ieee80211_cfg_on_oper_channel(struct ieee80211_local *local);
-void ieee80211_offchannel_enable_all_ps(struct ieee80211_local *local,
- bool tell_ap);
-void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local,
- bool offchannel_ps_enable);
+void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local);
+void ieee80211_offchannel_stop_station(struct ieee80211_local *local);
void ieee80211_offchannel_return(struct ieee80211_local *local,
- bool enable_beaconing,
- bool offchannel_ps_disable);
+ bool enable_beaconing);
void ieee80211_hw_roc_setup(struct ieee80211_local *local);
/* interface handling */
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index acb4423..2d607e5 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -92,47 +92,6 @@ static void ieee80211_reconfig_filter(struct work_struct *work)
ieee80211_configure_filter(local);
}
-/*
- * Returns true if we are logically configured to be on
- * the operating channel AND the hardware-conf is currently
- * configured on the operating channel. Compares channel-type
- * as well.
- */
-bool ieee80211_cfg_on_oper_channel(struct ieee80211_local *local)
-{
- struct ieee80211_channel *chan, *scan_chan;
- enum nl80211_channel_type channel_type;
-
- /* This logic needs to match logic in ieee80211_hw_config */
- if (local->scan_channel) {
- chan = local->scan_channel;
- /* If scanning on oper channel, use whatever channel-type
- * is currently in use.
- */
- if (chan == local->oper_channel)
- channel_type = local->_oper_channel_type;
- else
- channel_type = NL80211_CHAN_NO_HT;
- } else if (local->tmp_channel) {
- chan = scan_chan = local->tmp_channel;
- channel_type = local->tmp_channel_type;
- } else {
- chan = local->oper_channel;
- channel_type = local->_oper_channel_type;
- }
-
- if (chan != local->oper_channel ||
- channel_type != local->_oper_channel_type)
- return false;
-
- /* Check current hardware-config against oper_channel. */
- if ((local->oper_channel != local->hw.conf.channel) ||
- (local->_oper_channel_type != local->hw.conf.channel_type))
- return false;
-
- return true;
-}
-
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
struct ieee80211_channel *chan, *scan_chan;
@@ -145,9 +104,6 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
scan_chan = local->scan_channel;
- /* If this off-channel logic ever changes, ieee80211_on_oper_channel
- * may need to change as well.
- */
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (scan_chan) {
chan = scan_chan;
@@ -158,19 +114,17 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
channel_type = local->_oper_channel_type;
else
channel_type = NL80211_CHAN_NO_HT;
- } else if (local->tmp_channel) {
+ local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
+ } else if (local->tmp_channel &&
+ local->oper_channel != local->tmp_channel) {
chan = scan_chan = local->tmp_channel;
channel_type = local->tmp_channel_type;
+ local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
} else {
chan = local->oper_channel;
channel_type = local->_oper_channel_type;
- }
-
- if (chan != local->oper_channel ||
- channel_type != local->_oper_channel_type)
- local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
- else
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
+ }
offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
@@ -279,7 +233,7 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
if (changed & BSS_CHANGED_BEACON_ENABLED) {
if (local->quiescing || !ieee80211_sdata_running(sdata) ||
- test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) {
+ test_bit(SCAN_SW_SCANNING, &local->scanning)) {
sdata->vif.bss_conf.enable_beacon = false;
} else {
/*
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 13427b1..b4e5267 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -17,14 +17,10 @@
#include "driver-trace.h"
/*
- * Tell our hardware to disable PS.
- * Optionally inform AP that we will go to sleep so that it will buffer
- * the frames while we are doing off-channel work. This is optional
- * because we *may* be doing work on-operating channel, and want our
- * hardware unconditionally awake, but still let the AP send us normal frames.
+ * inform AP that we will go to sleep so that it will buffer the frames
+ * while we scan
*/
-static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata,
- bool tell_ap)
+static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -45,8 +41,8 @@ static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata,
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
- if (tell_ap && (!local->offchannel_ps_enabled ||
- !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)))
+ if (!(local->offchannel_ps_enabled) ||
+ !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
/*
* If power save was enabled, no need to send a nullfunc
* frame because AP knows that we are sleeping. But if the
@@ -81,9 +77,6 @@ static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
* we are sleeping, let's just enable power save mode in
* hardware.
*/
- /* TODO: Only set hardware if CONF_PS changed?
- * TODO: Should we set offchannel_ps_enabled to false?
- */
local->hw.conf.flags |= IEEE80211_CONF_PS;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
} else if (local->hw.conf.dynamic_ps_timeout > 0) {
@@ -102,61 +95,63 @@ static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
ieee80211_sta_reset_conn_monitor(sdata);
}
-void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local,
- bool offchannel_ps_enable)
+void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
- /*
- * notify the AP about us leaving the channel and stop all
- * STA interfaces.
- */
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
- if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
- set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
-
- /* Check to see if we should disable beaconing. */
+ /* disable beaconing */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
ieee80211_bss_info_change_notify(
sdata, BSS_CHANGED_BEACON_ENABLED);
- if (sdata->vif.type != NL80211_IFTYPE_MONITOR) {
+ /*
+ * only handle non-STA interfaces here, STA interfaces
+ * are handled in ieee80211_offchannel_stop_station(),
+ * e.g., from the background scan state machine.
+ *
+ * In addition, do not stop monitor interface to allow it to be
+ * used from user space controlled off-channel operations.
+ */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_MONITOR) {
+ set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
netif_tx_stop_all_queues(sdata->dev);
- if (offchannel_ps_enable &&
- (sdata->vif.type == NL80211_IFTYPE_STATION) &&
- sdata->u.mgd.associated)
- ieee80211_offchannel_ps_enable(sdata, true);
}
}
mutex_unlock(&local->iflist_mtx);
}
-void ieee80211_offchannel_enable_all_ps(struct ieee80211_local *local,
- bool tell_ap)
+void ieee80211_offchannel_stop_station(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
+ /*
+ * notify the AP about us leaving the channel and stop all STA interfaces
+ */
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
- if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- sdata->u.mgd.associated)
- ieee80211_offchannel_ps_enable(sdata, tell_ap);
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
+ netif_tx_stop_all_queues(sdata->dev);
+ if (sdata->u.mgd.associated)
+ ieee80211_offchannel_ps_enable(sdata);
+ }
}
mutex_unlock(&local->iflist_mtx);
}
void ieee80211_offchannel_return(struct ieee80211_local *local,
- bool enable_beaconing,
- bool offchannel_ps_disable)
+ bool enable_beaconing)
{
struct ieee80211_sub_if_data *sdata;
@@ -166,8 +161,7 @@ void ieee80211_offchannel_return(struct ieee80211_local *local,
continue;
/* Tell AP we're back */
- if (offchannel_ps_disable &&
- sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated)
ieee80211_offchannel_ps_disable(sdata);
}
@@ -187,7 +181,7 @@ void ieee80211_offchannel_return(struct ieee80211_local *local,
netif_tx_wake_all_queues(sdata->dev);
}
- /* Check to see if we should re-enable beaconing */
+ /* re-enable beaconing */
if (enable_beaconing &&
(sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index fe2c2a7..b46880e 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -417,10 +417,16 @@ ieee80211_rx_h_passive_scan(struct ieee80211_rx_data *rx)
return RX_CONTINUE;
if (test_bit(SCAN_HW_SCANNING, &local->scanning) ||
- test_bit(SCAN_SW_SCANNING, &local->scanning) ||
local->sched_scanning)
return ieee80211_scan_rx(rx->sdata, skb);
+ if (test_bit(SCAN_SW_SCANNING, &local->scanning)) {
+ /* drop all the other packets during a software scan anyway */
+ if (ieee80211_scan_rx(rx->sdata, skb) != RX_QUEUED)
+ dev_kfree_skb(skb);
+ return RX_QUEUED;
+ }
+
/* scanning finished during invoking of handlers */
I802_DEBUG_INC(local->rx_handlers_drop_passive_scan);
return RX_DROP_UNUSABLE;
@@ -2771,7 +2777,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
local->dot11ReceivedFragmentCount++;
if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
- test_bit(SCAN_SW_SCANNING, &local->scanning)))
+ test_bit(SCAN_OFF_CHANNEL, &local->scanning)))
status->rx_flags |= IEEE80211_RX_IN_SCAN;
if (ieee80211_is_mgmt(fc))
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 6f09eca..2ba4977 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -212,14 +212,6 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
if (bss)
ieee80211_rx_bss_put(sdata->local, bss);
- /* If we are on-operating-channel, and this packet is for the
- * current channel, pass the pkt on up the stack so that
- * the rest of the stack can make use of it.
- */
- if (ieee80211_cfg_on_oper_channel(sdata->local)
- && (channel == sdata->local->oper_channel))
- return RX_CONTINUE;
-
dev_kfree_skb(skb);
return RX_QUEUED;
}
@@ -262,8 +254,6 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted,
bool was_hw_scan)
{
struct ieee80211_local *local = hw_to_local(hw);
- bool on_oper_chan;
- bool enable_beacons = false;
lockdep_assert_held(&local->mtx);
@@ -296,25 +286,11 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted,
local->scanning = 0;
local->scan_channel = NULL;
- on_oper_chan = ieee80211_cfg_on_oper_channel(local);
-
- if (was_hw_scan || !on_oper_chan)
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
- else
- /* Set power back to normal operating levels. */
- ieee80211_hw_config(local, 0);
-
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!was_hw_scan) {
- bool on_oper_chan2;
ieee80211_configure_filter(local);
drv_sw_scan_complete(local);
- on_oper_chan2 = ieee80211_cfg_on_oper_channel(local);
- /* We should always be on-channel at this point. */
- WARN_ON(!on_oper_chan2);
- if (on_oper_chan2 && (on_oper_chan != on_oper_chan2))
- enable_beacons = true;
-
- ieee80211_offchannel_return(local, enable_beacons, true);
+ ieee80211_offchannel_return(local, true);
}
ieee80211_recalc_idle(local);
@@ -355,15 +331,13 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local)
*/
drv_sw_scan_start(local);
+ ieee80211_offchannel_stop_beaconing(local);
+
local->leave_oper_channel_time = 0;
local->next_scan_state = SCAN_DECISION;
local->scan_channel_idx = 0;
- /* We always want to use off-channel PS, even if we
- * are not really leaving oper-channel. Don't
- * tell the AP though, as long as we are on-channel.
- */
- ieee80211_offchannel_enable_all_ps(local, false);
+ drv_flush(local, false);
ieee80211_configure_filter(local);
@@ -506,20 +480,7 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
}
mutex_unlock(&local->iflist_mtx);
- next_chan = local->scan_req->channels[local->scan_channel_idx];
-
- if (ieee80211_cfg_on_oper_channel(local)) {
- /* We're currently on operating channel. */
- if (next_chan == local->oper_channel)
- /* We don't need to move off of operating channel. */
- local->next_scan_state = SCAN_SET_CHANNEL;
- else
- /*
- * We do need to leave operating channel, as next
- * scan is somewhere else.
- */
- local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
- } else {
+ if (local->scan_channel) {
/*
* we're currently scanning a different channel, let's
* see if we can scan another channel without interfering
@@ -535,6 +496,7 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
*
* Otherwise switch back to the operating channel.
*/
+ next_chan = local->scan_req->channels[local->scan_channel_idx];
bad_latency = time_after(jiffies +
ieee80211_scan_get_channel_time(next_chan),
@@ -552,6 +514,12 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
local->next_scan_state = SCAN_ENTER_OPER_CHANNEL;
else
local->next_scan_state = SCAN_SET_CHANNEL;
+ } else {
+ /*
+ * we're on the operating channel currently, let's
+ * leave that channel now to scan another one
+ */
+ local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
}
*next_delay = 0;
@@ -560,10 +528,9 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
- /* PS will already be in off-channel mode,
- * we do that once at the beginning of scanning.
- */
- ieee80211_offchannel_stop_vifs(local, false);
+ ieee80211_offchannel_stop_station(local);
+
+ __set_bit(SCAN_OFF_CHANNEL, &local->scanning);
/*
* What if the nullfunc frames didn't arrive?
@@ -586,15 +553,15 @@ static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *loca
{
/* switch back to the operating channel */
local->scan_channel = NULL;
- if (!ieee80211_cfg_on_oper_channel(local))
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
/*
- * Re-enable vifs and beaconing. Leave PS
- * in off-channel state..will put that back
- * on-channel at the end of scanning.
+ * Only re-enable station mode interface now; beaconing will be
+ * re-enabled once the full scan has been completed.
*/
- ieee80211_offchannel_return(local, true, false);
+ ieee80211_offchannel_return(local, false);
+
+ __clear_bit(SCAN_OFF_CHANNEL, &local->scanning);
*next_delay = HZ / 5;
local->next_scan_state = SCAN_DECISION;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 8cb0d2d..54ea022 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -258,8 +258,7 @@ ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED))
return TX_CONTINUE;
- if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) &&
- test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) &&
+ if (unlikely(test_bit(SCAN_OFF_CHANNEL, &tx->local->scanning)) &&
!ieee80211_is_probe_req(hdr->frame_control) &&
!ieee80211_is_nullfunc(hdr->frame_control))
/*
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index 7737f20..b76bf33 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -901,26 +901,6 @@ static bool ieee80211_work_ct_coexists(enum nl80211_channel_type wk_ct,
return false;
}
-static enum nl80211_channel_type
-ieee80211_calc_ct(enum nl80211_channel_type wk_ct,
- enum nl80211_channel_type oper_ct)
-{
- switch (wk_ct) {
- case NL80211_CHAN_NO_HT:
- return oper_ct;
- case NL80211_CHAN_HT20:
- if (oper_ct != NL80211_CHAN_NO_HT)
- return oper_ct;
- return wk_ct;
- case NL80211_CHAN_HT40MINUS:
- case NL80211_CHAN_HT40PLUS:
- return wk_ct;
- }
- WARN_ON(1); /* shouldn't get here */
- return wk_ct;
-}
-
-
static void ieee80211_work_timer(unsigned long data)
{
struct ieee80211_local *local = (void *) data;
@@ -971,52 +951,18 @@ static void ieee80211_work_work(struct work_struct *work)
}
if (!started && !local->tmp_channel) {
- bool on_oper_chan;
- bool tmp_chan_changed = false;
- bool on_oper_chan2;
- enum nl80211_channel_type wk_ct;
- on_oper_chan = ieee80211_cfg_on_oper_channel(local);
-
- /* Work with existing channel type if possible. */
- wk_ct = wk->chan_type;
- if (wk->chan == local->hw.conf.channel)
- wk_ct = ieee80211_calc_ct(wk->chan_type,
- local->hw.conf.channel_type);
-
- if (local->tmp_channel)
- if ((local->tmp_channel != wk->chan) ||
- (local->tmp_channel_type != wk_ct))
- tmp_chan_changed = true;
-
- local->tmp_channel = wk->chan;
- local->tmp_channel_type = wk_ct;
/*
- * Leave the station vifs in awake mode if they
- * happen to be on the same channel as
- * the requested channel.
+ * TODO: could optimize this by leaving the
+ * station vifs in awake mode if they
+ * happen to be on the same channel as
+ * the requested channel
*/
- on_oper_chan2 = ieee80211_cfg_on_oper_channel(local);
- if (on_oper_chan != on_oper_chan2) {
- if (on_oper_chan2) {
- /* going off oper channel, PS too */
- ieee80211_offchannel_stop_vifs(local,
- true);
- ieee80211_hw_config(local, 0);
- } else {
- /* going on channel, but leave PS
- * off-channel. */
- ieee80211_hw_config(local, 0);
- ieee80211_offchannel_return(local,
- true,
- false);
- }
- } else if (tmp_chan_changed)
- /* Still off-channel, but on some other
- * channel, so update hardware.
- * PS should already be off-channel.
- */
- ieee80211_hw_config(local, 0);
+ ieee80211_offchannel_stop_beaconing(local);
+ ieee80211_offchannel_stop_station(local);
+ local->tmp_channel = wk->chan;
+ local->tmp_channel_type = wk->chan_type;
+ ieee80211_hw_config(local, 0);
started = true;
wk->timeout = jiffies;
}
@@ -1102,8 +1048,7 @@ static void ieee80211_work_work(struct work_struct *work)
* we still need to do a hardware config. Currently,
* we cannot be here while scanning, however.
*/
- if (!ieee80211_cfg_on_oper_channel(local))
- ieee80211_hw_config(local, 0);
+ ieee80211_hw_config(local, 0);
/* At the least, we need to disable offchannel_ps,
* so just go ahead and run the entire offchannel
@@ -1111,7 +1056,7 @@ static void ieee80211_work_work(struct work_struct *work)
* beaconing if we were already on-oper-channel
* as a future optimization.
*/
- ieee80211_offchannel_return(local, true, true);
+ ieee80211_offchannel_return(local, true);
/* give connection some time to breathe */
run_again(local, jiffies + HZ/2);