- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild

Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>
reupload sources
2019-07-25 09:39:07 +00:00 · 2019-02-19 10:18:15 +01:00 · 2019-02-19 10:13:27 +01:00 · 2019-02-19 10:12:48 +01:00 · 2019-02-17 09:30:50 +01:00 · 2019-02-01 03:29:27 +00:00
18 changed files with 570 additions and 1224 deletions
--- a/.gitignore
+++ b/.gitignore
@ -7,3 +7,7 @@ ipmitool-1.8.11.tar.bz2
 /ipmitool-1.8.12-130731.tar.bz2
 /ipmitool-1.8.13.tar.bz2
 /ipmitool-1.8.15.tar.bz2
+/ipmitool-1.8.16.tar.bz2
+/ipmitool-1.8.17.tar.bz2
+/ipmitool-1.8.18.tar.bz2
+/ipmitool-1.8.18.tar.gz
--- a/0001-CVE-2011-4339-OpenIPMI.patch
+++ b/0001-CVE-2011-4339-OpenIPMI.patch
@ -0,0 +1,25 @@
+From 152efd46931a70ab4e3d81e99d312df7dcd666e6 Mon Sep 17 00:00:00 2001
+From: Boris Ranto <branto@redhat.com>
+Date: Tue, 10 May 2016 19:12:08 +0200
+Subject: [PATCH] CVE-2011-4339 OpenIPMI
+
+IPMI event daemon creates PID file with world writeable permissions
+---
+ lib/helper.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/lib/helper.c b/lib/helper.c
+index de91438..c3a1c80 100644
+--- a/lib/helper.c
+++ b/lib/helper.c
+@@ -829,7 +829,6 @@ ipmi_start_daemon(struct ipmi_intf *intf)
+ #endif
+ 
+ 	chdir("/");
+-	umask(0);
+ 
+ 	for (fd=0; fd<64; fd++) {
+ 		if (fd != intf->fd)
+-- 
+2.7.4
+
--- a/0002-openssl.patch
+++ b/0002-openssl.patch
@ -0,0 +1,89 @@
+diff -urNp old/src/plugins/lanplus/lanplus_crypt_impl.c new/src/plugins/lanplus/lanplus_crypt_impl.c
+--- old/src/plugins/lanplus/lanplus_crypt_impl.c	2016-05-28 10:20:20.000000000 +0200
+++ new/src/plugins/lanplus/lanplus_crypt_impl.c	2017-02-21 10:50:21.634873466 +0100
+@@ -164,10 +164,10 @@ lanplus_encrypt_aes_cbc_128(const uint8_
+ 							uint8_t       * output,
+ 							uint32_t        * bytes_written)
+ {
+-	EVP_CIPHER_CTX ctx;
+-	EVP_CIPHER_CTX_init(&ctx);
+-	EVP_EncryptInit_ex(&ctx, EVP_aes_128_cbc(), NULL, key, iv);
+-	EVP_CIPHER_CTX_set_padding(&ctx, 0);
+	EVP_CIPHER_CTX *ctx = EVP_CIPHER_CTX_new();
+	EVP_CIPHER_CTX_init(ctx);
+	EVP_EncryptInit_ex(ctx, EVP_aes_128_cbc(), NULL, key, iv);
+	EVP_CIPHER_CTX_set_padding(ctx, 0);
+ 	
+ 
+ 	*bytes_written = 0;
+@@ -191,7 +191,7 @@ lanplus_encrypt_aes_cbc_128(const uint8_
+ 	assert((input_length % IPMI_CRYPT_AES_CBC_128_BLOCK_SIZE) == 0);
+ 
+ 
+-	if(!EVP_EncryptUpdate(&ctx, output, (int *)bytes_written, input, input_length))
+	if(!EVP_EncryptUpdate(ctx, output, (int *)bytes_written, input, input_length))
+ 	{
+ 		/* Error */
+ 		*bytes_written = 0;
+@@ -201,7 +201,7 @@ lanplus_encrypt_aes_cbc_128(const uint8_
+ 	{
+ 		uint32_t tmplen;
+ 
+-		if(!EVP_EncryptFinal_ex(&ctx, output + *bytes_written, (int *)&tmplen))
+		if(!EVP_EncryptFinal_ex(ctx, output + *bytes_written, (int *)&tmplen))
+ 		{
+ 			*bytes_written = 0;
+ 			return; /* Error */
+@@ -210,7 +210,8 @@ lanplus_encrypt_aes_cbc_128(const uint8_
+ 		{
+ 			/* Success */
+ 			*bytes_written += tmplen;
+-			EVP_CIPHER_CTX_cleanup(&ctx);
+			EVP_CIPHER_CTX_cleanup(ctx);
+			EVP_CIPHER_CTX_free(ctx);
+ 		}
+ 	}
+ }
+@@ -239,10 +240,10 @@ lanplus_decrypt_aes_cbc_128(const uint8_
+ 							uint8_t       * output,
+ 							uint32_t        * bytes_written)
+ {
+-	EVP_CIPHER_CTX ctx;
+-	EVP_CIPHER_CTX_init(&ctx);
+-	EVP_DecryptInit_ex(&ctx, EVP_aes_128_cbc(), NULL, key, iv);
+-	EVP_CIPHER_CTX_set_padding(&ctx, 0);
+	EVP_CIPHER_CTX *ctx = EVP_CIPHER_CTX_new();
+	EVP_CIPHER_CTX_init(ctx);
+	EVP_DecryptInit_ex(ctx, EVP_aes_128_cbc(), NULL, key, iv);
+	EVP_CIPHER_CTX_set_padding(ctx, 0);
+ 
+ 
+ 	if (verbose >= 5)
+@@ -266,7 +267,7 @@ lanplus_decrypt_aes_cbc_128(const uint8_
+ 	assert((input_length % IPMI_CRYPT_AES_CBC_128_BLOCK_SIZE) == 0);
+ 
+ 
+-	if (!EVP_DecryptUpdate(&ctx, output, (int *)bytes_written, input, input_length))
+	if (!EVP_DecryptUpdate(ctx, output, (int *)bytes_written, input, input_length))
+ 	{
+ 		/* Error */
+ 		lprintf(LOG_DEBUG, "ERROR: decrypt update failed");
+@@ -277,7 +278,7 @@ lanplus_decrypt_aes_cbc_128(const uint8_
+ 	{
+ 		uint32_t tmplen;
+ 
+-		if (!EVP_DecryptFinal_ex(&ctx, output + *bytes_written, (int *)&tmplen))
+		if (!EVP_DecryptFinal_ex(ctx, output + *bytes_written, (int *)&tmplen))
+ 		{
+ 			char buffer[1000];
+ 			ERR_error_string(ERR_get_error(), buffer);
+@@ -290,7 +291,8 @@ lanplus_decrypt_aes_cbc_128(const uint8_
+ 		{
+ 			/* Success */
+ 			*bytes_written += tmplen;
+-			EVP_CIPHER_CTX_cleanup(&ctx);
+			EVP_CIPHER_CTX_cleanup(ctx);
+			EVP_CIPHER_CTX_free(ctx);
+ 		}
+ 	}
+ 
--- a/0003-ipmitool-1.8.11-set-kg-key.patch
+++ b/0003-ipmitool-1.8.11-set-kg-key.patch
@ -0,0 +1,240 @@
+diff -urNp old/doc/ipmitool.1 new/doc/ipmitool.1
+--- old/doc/ipmitool.1	2017-02-06 10:20:02.254362909 +0100
+++ new/doc/ipmitool.1	2017-02-06 10:33:41.729294474 +0100
+@@ -372,6 +372,20 @@ Configure user access information on the
+ 
+ Displays the list of cipher suites supported for the given
+ application (ipmi or sol) on the given channel.
+.TP
+\fIsetkg\fP <\fIhex\fP|\fIplain\fP> <\fBkey\fP> [<\fBchannel\fR>]
+.br
+
+Sets K_g key to given value. Use \fIplain\fP to specify \fBkey\fR as simple ASCII string.
+Use \fIhex\fP to specify \fBkey\fR as sequence of hexadecimal codes of ASCII charactes.
+I.e. following two examples are equivalent:
+
+.RS
+ipmitool channel setkg plain PASSWORD
+
+ipmitool channel setkg hex 50415353574F5244
+.RE
+
+ .RE
+ .RE
+ .TP 
+diff -urNp old/include/ipmitool/helper.h new/include/ipmitool/helper.h
+--- old/include/ipmitool/helper.h	2017-02-06 10:20:02.254362909 +0100
+++ new/include/ipmitool/helper.h	2017-02-06 10:40:07.336136844 +0100
+@@ -58,6 +58,8 @@
+ # define IPMI_UID_MAX 63
+ #endif
+ 
+#define IPMI_KG_BUFFER_SIZE       21 /* key plus null byte */
+
+ struct ipmi_intf;
+ 
+ struct valstr {
+diff -urNp old/include/ipmitool/ipmi_channel.h new/include/ipmitool/ipmi_channel.h
+--- old/include/ipmitool/ipmi_channel.h	2017-02-06 10:20:02.253316684 +0100
+++ new/include/ipmitool/ipmi_channel.h	2017-02-06 10:58:15.291287621 +0100
+@@ -49,6 +49,10 @@
+ #define IPMI_GET_USER_NAME             0x46
+ #define IPMI_SET_USER_PASSWORD         0x47
+ #define IPMI_GET_CHANNEL_CIPHER_SUITES 0x54
+#define IPMI_SET_CHANNEL_SECURITY_KEYS 0x56
+
+#define IPMI_KG_KEY_ID  1
+#define IPMI_SET_CHANNEL_SECURITY_KEYS_OP_SET 1
+ 
+ /* These are for channel_info_t.session_support */
+ #define IPMI_CHANNEL_SESSION_LESS 0x00
+@@ -137,6 +141,40 @@ int _ipmi_set_channel_access(struct ipmi
+ 		struct channel_access_t channel_access, uint8_t access_option,
+ 		uint8_t privilege_option);
+ 
+struct set_channel_security_keys_req {
+#if WORDS_BIGENDIAN
+	uint8_t __reserved1			:4;
+	uint8_t channel				:4;
+	
+	uint8_t __reserved2			:6;
+	uint8_t operation			:2;
+	
+	uint8_t key_id;
+	unsigned char key_value[IPMI_KG_BUFFER_SIZE-1]; /* we don't want space for '\0' at the end */
+#else
+	uint8_t channel				:4;
+	uint8_t __reserved1			:4;
+	
+	uint8_t operation			:2;
+	uint8_t __reserved2			:6;
+	
+	uint8_t key_id;
+	unsigned char key_value[IPMI_KG_BUFFER_SIZE-1]; /* we don't want space for '\0' at the end */
+#endif
+} __attribute__ ((packed));
+
+struct set_channel_security_keys_rsp {
+#if WORDS_BIGENDIAN
+	uint8_t __reserved1			:6;
+	uint8_t lock_status			:2;
+	unsigned char key_value; /* just the first character, use &key_value to explore the rest */
+#else
+	uint8_t lock_status			:2;
+	uint8_t __reserved1			:6;
+	unsigned char key_value; /* just the first character, use &key_value to explore the rest */
+#endif
+} __attribute__ ((packed));
+
+ uint8_t ipmi_get_channel_medium(struct ipmi_intf * intf, uint8_t channel);
+ uint8_t ipmi_current_channel_medium(struct ipmi_intf * intf);
+ int ipmi_channel_main(struct ipmi_intf * intf, int argc, char ** argv);
+diff -urNp old/include/ipmitool/ipmi_intf.h new/include/ipmitool/ipmi_intf.h
+--- old/include/ipmitool/ipmi_intf.h	2017-02-06 10:20:02.254362909 +0100
+++ new/include/ipmitool/ipmi_intf.h	2017-02-06 10:40:40.264577602 +0100
+@@ -60,7 +60,6 @@ enum LANPLUS_SESSION_STATE {
+ 
+ #define IPMI_AUTHCODE_BUFFER_SIZE 20
+ #define IPMI_SIK_BUFFER_SIZE      IPMI_MAX_MD_SIZE
+-#define IPMI_KG_BUFFER_SIZE       21 /* key plus null byte */
+ 
+ struct ipmi_session_params {
+ 	char * hostname;
+diff -urNp old/lib/ipmi_channel.c new/lib/ipmi_channel.c
+--- old/lib/ipmi_channel.c	2017-02-06 10:20:02.255409134 +0100
+++ new/lib/ipmi_channel.c	2017-02-06 12:32:14.222282317 +0100
+@@ -821,6 +821,92 @@ ipmi_set_user_access(struct ipmi_intf *i
+ 	return 0;
+ }
+ 
+int 
+ipmi_set_channel_security_keys (struct ipmi_intf *intf, uint8_t channel, const char *method, const char *key)
+{
+	uint8_t kgkey[IPMI_KG_BUFFER_SIZE];
+	struct ipmi_rs *rsp;
+	struct ipmi_rq req;
+	struct set_channel_security_keys_req req_data;
+	int rc = -1;
+	
+	/* convert provided key to array of bytes */
+	if (strcmp(method, "hex") == 0) {
+		if (strlen(key) > (IPMI_KG_BUFFER_SIZE-1)*2) {
+			lprintf(LOG_ERR, "Provided key is too long, max. length is %d bytes", (IPMI_KG_BUFFER_SIZE-1));
+			printf_channel_usage();
+			return -1;
+		}
+
+		rc = ipmi_parse_hex(key, kgkey, sizeof(kgkey)-1);
+		if (rc == -1) {
+			lprintf(LOG_ERR, "Number of Kg key characters is not even");
+			return rc;
+		} else if (rc == -3) {
+			lprintf(LOG_ERR, "Kg key is not hexadecimal number");
+			return rc;
+		} else if (rc > (IPMI_KG_BUFFER_SIZE-1)) {
+			lprintf(LOG_ERR, "Kg key is too long");
+			return rc;
+		}
+		
+	} else if (strcmp(method, "plain") == 0) {
+		if (strlen(key) > IPMI_KG_BUFFER_SIZE-1) {
+			lprintf(LOG_ERR, "Provided key is too long, max. length is %d bytes", (IPMI_KG_BUFFER_SIZE -1));
+			printf_channel_usage();
+			return rc;
+		}
+		
+		strncpy(kgkey, key, IPMI_KG_BUFFER_SIZE-1);
+	} else {
+		printf_channel_usage();
+		return rc;
+	}
+	
+	/* assemble and send request to set kg key */
+	memset(&req_data, 0, sizeof(req_data));
+	req_data.channel = channel;
+	req_data.operation = IPMI_SET_CHANNEL_SECURITY_KEYS_OP_SET;
+	req_data.key_id = IPMI_KG_KEY_ID;
+	memcpy(req_data.key_value, kgkey, IPMI_KG_BUFFER_SIZE-1);
+	
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = IPMI_SET_CHANNEL_SECURITY_KEYS;
+	req.msg.data = (uint8_t*) &req_data;
+	req.msg.data_len = sizeof(req_data);
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Set Channel Security Keys command failed");
+		return rc;
+	}
+	if (rsp->ccode > 0) {
+		const char *error = NULL;
+		switch (rsp->ccode) {
+		case 0x80:
+			error = "Key is locked";
+			break;
+		case 0x81:
+			error = "Insufficient key bytes";
+			break;
+		case 0x82:
+			error = "Too many key bytes";
+			break;
+		case 0x83:
+			error = "Key value does not meet criteria for K_g key";
+			break;
+		default:
+			error = val2str(rsp->ccode, completion_code_vals);
+		}
+		lprintf(LOG_ERR, "Error setting security key: %X (%s)", rsp->ccode, error);
+		return rc;
+	}
+	
+	lprintf(LOG_NOTICE, "Set Channel Security Keys command succeeded");
+	return 0;
+}
+
+ int
+ ipmi_channel_main(struct ipmi_intf *intf, int argc, char **argv)
+ {
+@@ -890,6 +976,19 @@ ipmi_channel_main(struct ipmi_intf *intf
+ 		retval = ipmi_get_channel_cipher_suites(intf,
+ 							argv[1], /* ipmi | sol */
+ 							channel);
+	} else if (strncmp(argv[0], "setkg", 5) == 0) {
+		if (argc < 3 || argc > 4)
+			printf_channel_usage();
+		else {
+			uint8_t ch = 0xe;
+			char *method = argv[1];
+			char *key = argv[2];
+			if (argc == 4) {
+				ch = (uint8_t)strtol(argv[3], NULL, 0);
+			}
+				
+			retval = ipmi_set_channel_security_keys(intf, ch, method, key);
+		}
+ 	} else {
+ 		lprintf(LOG_ERR, "Invalid CHANNEL command: %s\n", argv[0]);
+ 		printf_channel_usage();
+@@ -916,6 +1015,10 @@ printf_channel_usage()
+ 	lprintf(LOG_NOTICE,
+ "");
+ 	lprintf(LOG_NOTICE,
+"                  setkg hex|plain <key> [channel]");
+	lprintf(LOG_NOTICE,
+"");
+	lprintf(LOG_NOTICE,
+ "Possible privilege levels are:");
+ 	lprintf(LOG_NOTICE,
+ "   1   Callback level");
+diff -urNp old/src/plugins/ipmi_intf.c new/src/plugins/ipmi_intf.c
+--- old/src/plugins/ipmi_intf.c	2017-02-06 10:20:02.257501584 +0100
+++ new/src/plugins/ipmi_intf.c	2017-02-06 10:42:12.585257810 +0100
+@@ -55,6 +55,7 @@
+ #include <ipmitool/ipmi.h>
+ #include <ipmitool/ipmi_sdr.h>
+ #include <ipmitool/log.h>
+#include <ipmitool/helper.h>
+ 
+ #define IPMI_DEFAULT_PAYLOAD_SIZE   25
+ 
--- a/0004-slowswid.patch
+++ b/0004-slowswid.patch
@ -0,0 +1,16 @@
+diff --git a/lib/ipmi_sdr.c b/lib/ipmi_sdr.c
+index fa7b082..9bc5ac2 100644
+--- a/lib/ipmi_sdr.c
+++ b/lib/ipmi_sdr.c
+@@ -572,6 +572,8 @@ ipmi_sdr_get_sensor_reading_ipmb(struct ipmi_intf *intf, uint8_t sensor,
+ 	uint32_t save_addr;
+ 	uint32_t save_channel;
+ 
+	if (target == (uint8_t) 0xb1)
+		return ipmi_sdr_get_sensor_reading(intf, sensor);
+ 	if ( BRIDGE_TO_SENSOR(intf, target, channel) ) {
+ 		lprintf(LOG_DEBUG,
+ 			"Bridge to Sensor "
+-- 
+2.1.0
+
--- a/0005-sensor-id-length.patch
+++ b/0005-sensor-id-length.patch
@ -0,0 +1,16 @@
+diff --git a/include/ipmitool/ipmi_sdr.h b/include/ipmitool/ipmi_sdr.h
+index ccf0cf0..47d3949 100644
+--- a/include/ipmitool/ipmi_sdr.h
+++ b/include/ipmitool/ipmi_sdr.h
+@@ -819,7 +819,7 @@ static const char *sensor_type_desc[] __attribute__ ((unused)) = {
+ 	    "Version Change", "FRU State" };
+ 
+ struct sensor_reading {
+-	char		s_id[17];		/* name of the sensor */
+	char		s_id[33];		/* name of the sensor */
+ 	struct sdr_record_full_sensor    *full;
+ 	struct sdr_record_compact_sensor *compact;
+ 	uint8_t		s_reading_valid;	/* read value valididity */
+-- 
+2.1.0
+
--- a/0006-enable-usb.patch
+++ b/0006-enable-usb.patch
@ -0,0 +1,21 @@
+diff -urNp old/configure.ac new/configure.ac
+--- old/configure.ac	2017-02-02 14:20:33.230784269 +0100
+++ new/configure.ac	2017-02-02 14:22:53.528510336 +0100
+@@ -63,7 +63,7 @@ xenable_intf_imb=yes
+ xenable_intf_lipmi=yes
+ xenable_intf_open=yes
+ #xenable_intf_serial=yes
+-xenable_intf_usb=no
+xenable_intf_usb=yes
+ xenable_ipmishell=yes
+ 
+ dnl set some things so we build with GNU tools on Solaris
+@@ -209,7 +209,7 @@ fi
+ dnl enable IPMI USB interface
+ AC_ARG_ENABLE([intf-usb],
+ 	[AC_HELP_STRING([--enable-intf-usb],
+-			[enable IPMI USB interface [default=auto]])],
+			[enable IPMI USB interface [default=yes]])],
+ 		[xenable_intf_usb=$enableval],
+ 		[xenable_intf_usb=$xenable_intf_usb])
+ if test "x$xenable_intf_usb" = "xstatic" || test "x$xenable_intf_usb" = "xplugin"; then
--- a/0007-check-input.patch
+++ b/0007-check-input.patch
@ -0,0 +1,41 @@
+diff -urNp old/doc/ipmitool.1 new/doc/ipmitool.1
+--- old/doc/ipmitool.1	2017-10-03 16:10:50.446539988 +0200
+++ new/doc/ipmitool.1	2017-10-03 16:16:37.039673239 +0200
+@@ -3170,13 +3170,14 @@ SOL configuration data for the currently
+ 
+ Enable, disable or show status of SOL payload for the user on the specified channel. 
+ .TP 
+-\fIset\fP <\fBparameter\fR> <\fBvalue\fR> [<\fBchannel\fR>]
+\fIset\fP <\fBparameter\fR> <\fBvalue\fR> [<\fBchannel\fR>] [\fBnoguard\fR]
+ .br 
+ 
+ Configure parameters for Serial Over Lan.  If no channel is given,
+ it will display SOL configuration data for the currently used
+ channel.  Configuration parameter updates are automatically guarded
+-with the updates to the set\-in\-progress parameter.
+with the updates to the set\-in\-progress parameter, unless \fInoguard\fR
+parameter is present.
+ .RS
+ .TP 
+ Valid parameters and values are:
+diff -urNp old/lib/ipmi_sol.c new/lib/ipmi_sol.c
+--- old/lib/ipmi_sol.c	2017-10-03 16:10:50.447539996 +0200
+++ new/lib/ipmi_sol.c	2017-10-03 16:18:37.079006949 +0200
+@@ -1875,7 +1875,7 @@ static void
+ print_sol_usage(void)
+ {
+ 	lprintf(LOG_NOTICE, "SOL Commands: info [<channel number>]");
+-	lprintf(LOG_NOTICE, "              set <parameter> <value> [channel]");
+	lprintf(LOG_NOTICE, "              set <parameter> <value> [channel] [noguard]");
+ 	lprintf(LOG_NOTICE, "              payload <enable|disable|status> [channel] [userid]");
+ 	lprintf(LOG_NOTICE, "              activate [<usesolkeepalive|nokeepalive>] [instance=<number>]");
+ 	lprintf(LOG_NOTICE, "              deactivate [instance=<number>]");
+@@ -1890,6 +1890,8 @@ print_sol_usage(void)
+ static void
+ print_sol_set_usage(void)
+ {
+	lprintf(LOG_NOTICE, "\nSOL set usage: \n");
+	lprintf(LOG_NOTICE, "  sol set <parameter> <value> [channel] [noguard]\n");
+ 	lprintf(LOG_NOTICE, "\nSOL set parameters and values: \n");
+   	lprintf(LOG_NOTICE, "  set-in-progress             set-complete | "
+ 		"set-in-progress | commit-write");
--- a/ipmitool-1.8.10-ipmievd-condrestart.patch
+++ b/ipmitool-1.8.10-ipmievd-condrestart.patch
@ -1,39 +0,0 @@
-532188 -  ipmievd init script's condrestart doesn't work
-
-Author: Ville Skyttä (ville.skytta@iki.fi)
-Sent upstream as https://sourceforge.net/tracker/?func=detail&aid=2889888&group_id=95200&atid=610552
-
-Index: contrib/ipmievd.init.redhat
-===================================================================
-RCS file: /cvsroot/ipmitool/ipmitool/contrib/ipmievd.init.redhat,v
-retrieving revision 1.1
-diff -u -r1.1 ipmievd.init.redhat
--- contrib/ipmievd.init.redhat	19 Mar 2006 23:05:48 -0000	1.1
-+++ contrib/ipmievd.init.redhat	31 Oct 2009 08:50:07 -0000
-@@ -62,6 +62,11 @@
- 	return $ret
- }
- 
-+restart() {
-+	stop
-+	start
-+}
-+
- case "$1" in
-     start)
- 	start
-@@ -72,11 +77,10 @@
-     status)
- 	status $IPMIEVD_BIN
- 	;;
-    restart|reload)
-    	stop
-	start
-+    restart|reload|force-reload)
-+	restart
- 	;;
-    condrestart)
-+    try-restart|condrestart)
- 	[ -f /var/lock/subsys/ipmievd ] && restart || :
- 	;;
-     *)
--- a/ipmitool-1.8.10-ipmievd-init.patch
+++ b/ipmitool-1.8.10-ipmievd-init.patch
@ -1,32 +0,0 @@
-diff -up ipmitool-1.8.10/contrib/ipmievd.init.redhat.ipmievd-init ipmitool-1.8.10/contrib/ipmievd.init.redhat
--- ipmitool-1.8.10/contrib/ipmievd.init.redhat.ipmievd-init	2006-03-20 00:05:48.000000000 +0100
-+++ ipmitool-1.8.10/contrib/ipmievd.init.redhat	2008-10-14 13:46:35.000000000 +0200
-@@ -5,7 +5,7 @@
- #       Based on example sysvinitfiles script
- #       Copyright (c) 2000 Red Hat Software, Inc.
- #
-# chkconfig: 345 99 00
-+# chkconfig: - 99 00
- # description: ipmievd daemon to send events to syslog
- # processname: ipmievd
- # config:      /etc/sysconfig/ipmievd
-@@ -16,8 +16,8 @@
- # Should-Start: $time
- # Required-Stop:     $syslog ipmi
- # Should-Stop: $time
-# Default-Start:     3 4 5
-# Default-Stop:      0 1 2 6
-+# Default-Start:     
-+# Default-Stop:      
- # Short-Description: ipmievd daemon to send events to syslog
- # Description:       Start ipmievd to read events from BMC and
- #	             log them to syslog.  Events correspond to hardware faults,
-@@ -85,7 +85,7 @@ case "$1" in
- 	;;
-     *)
- 	echo "Usage: ipmievd {start|stop|status|reload|restart|condrestart}"
-	exit 1
-+	exit 2
- 	;;
- esac
- exit $?
--- a/ipmitool-1.8.11-remove-umask0.patch
+++ b/ipmitool-1.8.11-remove-umask0.patch
@ -1,13 +0,0 @@
-CVE-2011-4339 OpenIPMI: IPMI event daemon creates PID file with world writeable permissions
-
-diff -up ipmitool-1.8.11/lib/helper.c.original ipmitool-1.8.11/lib/helper.c
--- ipmitool-1.8.11/lib/helper.c.original	2011-10-03 13:00:54.000000000 +0900
-+++ ipmitool-1.8.11/lib/helper.c	2011-10-03 13:01:01.000000000 +0900
-@@ -427,7 +427,6 @@ ipmi_start_daemon(struct ipmi_intf *intf
- #endif
- 
- 	chdir("/");
-	umask(0);
- 
- 	for (fd=0; fd<64; fd++) {
- 		if (fd != intf->fd)
--- a/ipmitool-1.8.12-fips.patch
+++ b/ipmitool-1.8.12-fips.patch
@ -1,174 +0,0 @@
-diff -up ./src/plugins/lan/lan.c.fips ./src/plugins/lan/lan.c
--- ./src/plugins/lan/lan.c.fips	2013-08-09 13:49:30.014768330 +0200
-+++ ./src/plugins/lan/lan.c	2013-08-09 13:55:02.425532024 +0200
-@@ -67,6 +67,10 @@
- #define IPMI_LAN_PORT		0x26f
- #define IPMI_LAN_CHANNEL_E	0x0e
- 
-+#if defined(HAVE_CRYPTO_MD2) || defined(HAVE_CRYPTO_MD5)
-+#include <openssl/fips.h>
-+#endif
-+
- extern const struct valstr ipmi_privlvl_vals[];
- extern const struct valstr ipmi_authtype_session_vals[];
- extern int verbose;
-@@ -861,10 +865,22 @@ ipmi_lan_build_cmd(struct ipmi_intf * in
- 		 */
- 		switch (s->authtype) {
- 		case IPMI_SESSION_AUTHTYPE_MD5:
-+		        if (FIPS_mode()) {
-+				if (verbose > 1) {
-+					printf("MD5 not supported in FIPS mode. Try -I lanplus\n");
-+				}
-+				return NULL;
-+			}
- 			temp = ipmi_auth_md5(s, msg+mp, msg[mp-1]);
- 			memcpy(msg+ap, temp, 16);
- 			break;
- 		case IPMI_SESSION_AUTHTYPE_MD2:
-+			if (FIPS_mode()) {
-+				if (verbose > 1) {
-+					printf("MD2 not supported in FIPS mode. Try -I lanplus\n");
-+				}
-+				return NULL;
-+			}
- 			temp = ipmi_auth_md2(s, msg+mp, msg[mp-1]);
- 			memcpy(msg+ap, temp, 16);
- 			break;
-diff -up ./src/plugins/lanplus/lanplus.c.fips ./src/plugins/lanplus/lanplus.c
--- ./src/plugins/lanplus/lanplus.c.fips	2013-07-16 06:17:39.000000000 +0200
-+++ ./src/plugins/lanplus/lanplus.c	2013-08-09 13:54:27.720451992 +0200
-@@ -65,6 +65,10 @@
- #include "rmcp.h"
- #include "asf.h"
- 
-+#if defined(HAVE_CRYPTO_MD2) || defined(HAVE_CRYPTO_MD5)
-+#include <openssl/fips.h>
-+#endif
-+
- extern const struct valstr ipmi_rakp_return_codes[];
- extern const struct valstr ipmi_priv_levels[];
- extern const struct valstr ipmi_auth_algorithms[];
-@@ -183,56 +187,122 @@ int lanplus_get_requested_ciphers(int
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_SHA1;
- 		*integrity_alg = IPMI_INTEGRITY_HMAC_SHA1_96;
- 		*crypt_alg     = IPMI_CRYPT_XRC4_128;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("RC4 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 5:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_SHA1;
- 		*integrity_alg = IPMI_INTEGRITY_HMAC_SHA1_96;
- 		*crypt_alg     = IPMI_CRYPT_XRC4_40;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("RC4 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 6:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_NONE;
- 		*crypt_alg     = IPMI_CRYPT_NONE;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 1\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 7:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_NONE;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 2\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 8:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_AES_CBC_128;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 9:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_XRC4_128;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 10:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_XRC4_40;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 11:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_NONE;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 12:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_AES_CBC_128;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 13:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_XRC4_128;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	case 14:
- 		*auth_alg      = IPMI_AUTH_RAKP_HMAC_MD5;
- 		*integrity_alg = IPMI_INTEGRITY_MD5_128;
- 		*crypt_alg     = IPMI_CRYPT_XRC4_40;
-+		if (FIPS_mode()) {
-+			if (verbose > 1) {
-+				printf("MD5 not supported in FIPS mode. Try -C 3\n");
-+			}
-+			return 1;
-+		}
- 		break;
- 	}
- 
--- a/ipmitool-1.8.12-fipsman.patch
+++ b/ipmitool-1.8.12-fipsman.patch
@ -1,19 +0,0 @@
-diff -up ./doc/ipmitool.1.fipsman ./doc/ipmitool.1
--- ./doc/ipmitool.1.fipsman	2013-08-09 13:13:27.005088284 +0200
-+++ ./doc/ipmitool.1	2013-08-09 13:23:07.975337252 +0200
-@@ -98,6 +98,7 @@ The remote server authentication, integr
- to use for IPMIv2.0 \fIlanplus\fP connections.  See table 22\-19 in the
- IPMIv2.0 specification.  The default is 3 which specifies RAKP\-HMAC\-SHA1 
- authentication, HMAC\-SHA1\-96 integrity, and AES\-CBC\-128 encryption algorithms.
-+In FIPS mode the 0-3 are available.
- .TP 
- \fB\-d \fIN\fP\fR
- Use device number N to specify the /dev/ipmiN (or 
-@@ -132,6 +133,7 @@ option is required for \fIlan\fP and \fI
- \fB\-I\fR <\fIinterface\fP>
- Selects IPMI interface to use.  Supported interfaces that are
- compiled in are visible in the usage help output.
-+In FIPS mode the lan interface is not available due to implemented authentication.
- .TP 
- \fB\-k\fR <\fIkey\fP>
- Use supplied Kg key for IPMIv2.0 authentication.  The default is not to
--- a/ipmitool-1.8.12f-passarg.patch
+++ b/ipmitool-1.8.12f-passarg.patch
@ -1,86 +0,0 @@
-diff -up ./lib/ipmi_main.c.passarg ./lib/ipmi_main.c
--- ./lib/ipmi_main.c.passarg	2012-12-13 16:47:34.585182645 +0100
-+++ ./lib/ipmi_main.c	2012-12-13 16:57:12.023739444 +0100
-@@ -403,6 +403,7 @@ ipmi_main(int argc, char ** argv,
- 	int argflag, i, found;
- 	int rc = -1;
- 	char sol_escape_char = SOL_ESCAPE_CHARACTER_DEFAULT;
-+	int querrypass = 0;
- 
- 	/* save program name */
- 	progname = strrchr(argv[0], '/');
-@@ -501,6 +502,7 @@ ipmi_main(int argc, char ** argv,
- 			}
- 			break;
- 		case 'f':
-+			querrypass = 0;
- 			if (password)
- 				free(password);
- 			password = ipmi_password_file_read(optarg);
-@@ -509,22 +511,7 @@ ipmi_main(int argc, char ** argv,
- 						"from file %s", optarg);
- 			break;
- 		case 'a':
-			if (tmp)
-				free(tmp);
-#ifdef HAVE_GETPASSPHRASE
-			tmp = getpassphrase("Password: ");
-#else
-			tmp = getpass("Password: ");
-#endif
-			if (tmp != NULL) {
-				if (password)
-					free(password);
-				password = strdup(tmp);
-				if (password == NULL) {
-					lprintf(LOG_ERR, "%s: malloc failure", progname);
-					goto out_free;
-				}
-			}
-+			querrypass = 1;
- 			break;
- 		case 'k':
- 			if (kgkey)
-@@ -623,6 +610,7 @@ ipmi_main(int argc, char ** argv,
- 			oemtype = strdup("supermicro");
- 			break;
- 		case 'P':
-+			querrypass = 0;
- 			if (password)
- 				free(password);
- 			password = strdup(optarg);
-@@ -636,6 +624,7 @@ ipmi_main(int argc, char ** argv,
- 			memset(optarg, 'X', i);
- 			break;
- 		case 'E':
-+			querrypass = 0;
- 			if ((tmpe = getenv("IPMITOOL_PASSWORD"))) {
- 				if (password)
- 					free(password);
-@@ -755,6 +744,26 @@ ipmi_main(int argc, char ** argv,
- 		}
- 	}
- 
-+	/* ask for password once and only if going to use it */
-+	if (querrypass) {
-+		if (tmp)
-+			free(tmp);
-+#ifdef HAVE_GETPASSPHRASE
-+		tmp = getpassphrase("Password: ");
-+#else
-+		tmp = getpass("Password: ");
-+#endif
-+		if (tmp != NULL) {
-+			if (password)
-+				free(password);
-+			password = strdup(tmp);
-+			if (password == NULL) {
-+				lprintf(LOG_ERR, "%s: malloc failure", progname);
-+				goto out_free;
-+			}
-+		}
-+	}
-+
- 	/* check for command before doing anything */
- 	if (argc-optind > 0 &&
- 			strncmp(argv[optind], "help", 4) == 0) {
--- a/ipmitool-1.8.13-dualbridgedoc.patch
+++ b/ipmitool-1.8.13-dualbridgedoc.patch
@ -1,13 +0,0 @@
-diff -up ipmitool-1.8.13/doc/ipmitool.1.dualbridge ipmitool-1.8.13/doc/ipmitool.1
--- ipmitool-1.8.13/doc/ipmitool.1.dualbridge	2013-11-05 10:10:20.139940133 +0100
-+++ ipmitool-1.8.13/doc/ipmitool.1	2013-11-05 10:10:35.197947425 +0100
-@@ -156,9 +156,6 @@ Set the local IPMB address.  The local a
- or is auto discovered on PICMG platforms when -m is not specified.
- There should be no need to change the local address for normal operation.
- .TP 
-\fB\-M\fR <\fIaddress\fP>
-Set transit local address for bridge request. (dual bridge)
-.TP 
- \fB\-N\fR <\fIsec\fP>
- Specify nr. of seconds between retransmissions of lan/lanplus messages.
- Defaults are 2 seconds for lan and 1 second for lanplus interfaces.
--- a/ipmitool-1.8.13-envarg.patch
+++ b/ipmitool-1.8.13-envarg.patch
@ -1,795 +0,0 @@
-diff --git a/lib/ipmi_main.c b/lib/ipmi_main.c
-index 1885bb5..0e420f6 100644
--- a/lib/ipmi_main.c
-+++ b/lib/ipmi_main.c
-@@ -388,401 +388,444 @@ ipmi_main(int argc, char ** argv,
- 	char sol_escape_char = SOL_ESCAPE_CHARACTER_DEFAULT;
- 	char * devfile  = NULL;
- 
-+	int cnt = argc;
-+	char **arg = argv;
-+	int voptind;
-+	int argecnt = 0;
-+	char **arge = NULL;
-+	char **narge = NULL;
-+	char *argestr = NULL;
-+
- 	/* save program name */
- 	progname = strrchr(argv[0], '/');
- 	progname = ((progname == NULL) ? argv[0] : progname+1);
- 	signal(SIGINT, ipmi_catch_sigint);
- 
-	while ((argflag = getopt(argc, (char **)argv, OPTION_STRING)) != -1)
-+	do
- 	{
-		switch (argflag) {
-		case 'I':
-			if (intfname) {
-				free(intfname);
-				intfname = NULL;
-			}
-			intfname = strdup(optarg);
-			if (intfname == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-			if (intflist != NULL) {
-				found = 0;
-				for (sup=intflist; sup->name != NULL; sup++) {
-					if (strncmp(sup->name, intfname, strlen(intfname)) == 0 &&
-							strncmp(sup->name, intfname, strlen(sup->name)) == 0 &&
-							sup->supported == 1)
-						found = 1;
-+		if (arge != NULL) {
-+			voptind = optind;
-+			cnt = argecnt;
-+			arg = arge;
-+		}
-+		while ((argflag = getopt(cnt, (char **)arg, OPTION_STRING)) != -1)
-+		{
-+			switch (argflag) {
-+			case 'I':
-+				if (intfname) {
-+					free(intfname);
-+					intfname = NULL;
- 				}
-				if (!found) {
-					lprintf(LOG_ERR, "Interface %s not supported", intfname);
-+				intfname = strdup(optarg);
-+				if (intfname == NULL) {
-+					lprintf(LOG_ERR, "%s: malloc failure", progname);
- 					goto out_free;
- 				}
-			}
-			break;
-		case 'h':
-			ipmi_option_usage(progname, cmdlist, intflist);
-			rc = 0;
-			goto out_free;
-			break;
-		case 'V':
-			printf("%s version %s\n", progname, VERSION);
-			rc = 0;
-			goto out_free;
-			break;
-		case 'd':
-			if (str2int(optarg, &devnum) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-d'.");
-				rc = -1;
-				goto out_free;
-			}
-			/* Check if device number is -gt 0; I couldn't find limit for
-			 * kernels > 2.6, thus right side is unlimited.
-			 */
-			if (devnum < 0) {
-				lprintf(LOG_ERR, "Device number %i is out of range.", devnum);
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		case 'p':
-			if (str2int(optarg, &port) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-p'.");
-				rc = -1;
-				goto out_free;
-			}
-			/* Check if port is -gt 0 && port is -lt 65535 */
-			if (port < 0 || port > 65535) {
-				lprintf(LOG_ERR, "Port number %i is out of range.", port);
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		case 'C':
-			if (str2int(optarg, &cipher_suite_id) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-C'.");
-				rc = -1;
-				goto out_free;
-			}
-			/* add check Cipher is -gt 0 */
-			if (cipher_suite_id < 0) {
-				lprintf(LOG_ERR, "Cipher suite ID %i is invalid.", cipher_suite_id);
-				rc = -1;
-+				if (intflist != NULL) {
-+					found = 0;
-+					for (sup=intflist; sup->name != NULL; sup++) {
-+						if (strncmp(sup->name, intfname, strlen(intfname)) == 0 &&
-+								strncmp(sup->name, intfname, strlen(sup->name)) == 0 &&
-+								sup->supported == 1)
-+							found = 1;
-+					}
-+					if (!found) {
-+						lprintf(LOG_ERR, "Interface %s not supported", intfname);
-+						goto out_free;
-+					}
-+				}
-+				break;
-+			case 'h':
-+				ipmi_option_usage(progname, cmdlist, intflist);
-+				rc = 0;
- 				goto out_free;
-			}
-			break;
-		case 'v':
-			verbose++;
-			break;
-		case 'c':
-			csv_output = 1;
-			break;
-		case 'H':
-			if (hostname) {
-				free(hostname);
-				hostname = NULL;
-			}
-			hostname = strdup(optarg);
-			if (hostname == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-+				break;
-+			case 'V':
-+				printf("%s version %s\n", progname, VERSION);
-+				rc = 0;
- 				goto out_free;
-			}
-			break;
-		case 'f':
-			if (password) {
-				free(password);
-				password = NULL;
-			}
-			password = ipmi_password_file_read(optarg);
-			if (password == NULL)
-				lprintf(LOG_ERR, "Unable to read password "
-						"from file %s", optarg);
-			break;
-		case 'a':
-#ifdef HAVE_GETPASSPHRASE
-			tmp_pass = getpassphrase("Password: ");
-#else
-			tmp_pass = getpass("Password: ");
-#endif
-			if (tmp_pass != NULL) {
-+				break;
-+			case 'd':
-+				if (str2int(optarg, &devnum) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-d'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				/* Check if device number is -gt 0; I couldn't find limit for
-+				 * kernels > 2.6, thus right side is unlimited.
-+				 */
-+				if (devnum < 0) {
-+					lprintf(LOG_ERR, "Device number %i is out of range.", devnum);
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'p':
-+				if (str2int(optarg, &port) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-p'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				/* Check if port is -gt 0 && port is -lt 65535 */
-+				if (port < 0 || port > 65535) {
-+					lprintf(LOG_ERR, "Port number %i is out of range.", port);
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'C':
-+				if (str2int(optarg, &cipher_suite_id) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-C'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				/* add check Cipher is -gt 0 */
-+				if (cipher_suite_id < 0) {
-+					lprintf(LOG_ERR, "Cipher suite ID %i is invalid.", cipher_suite_id);
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'v':
-+				verbose++;
-+				break;
-+			case 'c':
-+				csv_output = 1;
-+				break;
-+			case 'H':
-+				if (hostname) {
-+					free(hostname);
-+					hostname = NULL;
-+				}
-+				hostname = strdup(optarg);
-+				if (hostname == NULL) {
-+					lprintf(LOG_ERR, "%s: malloc failure", progname);
-+					goto out_free;
-+				}
-+				break;
-+			case 'f':
- 				if (password) {
- 					free(password);
- 					password = NULL;
- 				}
-				password = strdup(tmp_pass);
-				tmp_pass = NULL;
-				if (password == NULL) {
-					lprintf(LOG_ERR, "%s: malloc failure", progname);
-					goto out_free;
-+				password = ipmi_password_file_read(optarg);
-+				if (password == NULL)
-+					lprintf(LOG_ERR, "Unable to read password "
-+							"from file %s", optarg);
-+				break;
-+			case 'a':
-+#ifdef HAVE_GETPASSPHRASE
-+				tmp_pass = getpassphrase("Password: ");
-+#else
-+				tmp_pass = getpass("Password: ");
-+#endif
-+				if (tmp_pass != NULL) {
-+					if (password) {
-+						free(password);
-+						password = NULL;
-+					}
-+					password = strdup(tmp_pass);
-+					tmp_pass = NULL;
-+					if (password == NULL) {
-+						lprintf(LOG_ERR, "%s: malloc failure", progname);
-+						goto out_free;
-+					}
- 				}
-			}
-			break;
-		case 'k':
-			if (kgkey) {
-				free(kgkey);
-				kgkey = NULL;
-			}
-			kgkey = strdup(optarg);
-			if (kgkey == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-			break;
-		case 'K':
-			if ((tmp_env = getenv("IPMI_KGKEY"))) {
-+				break;
-+			case 'k':
- 				if (kgkey) {
- 					free(kgkey);
- 					kgkey = NULL;
- 				}
-				kgkey = strdup(tmp_env);
-+				kgkey = strdup(optarg);
- 				if (kgkey == NULL) {
- 					lprintf(LOG_ERR, "%s: malloc failure", progname);
- 					goto out_free;
- 				}
-			} else {
-				lprintf(LOG_WARN, "Unable to read kgkey from environment");
-			}
-			break;
-		case 'y':
-			if (kgkey) {
-				free(kgkey);
-				kgkey = NULL;
-			}
-			kgkey = ipmi_parse_hex(optarg);
-			if (kgkey == NULL) {
-				goto out_free;
-			}
-			break;
-		case 'Y':
-#ifdef HAVE_GETPASSPHRASE
-			tmp_pass = getpassphrase("Key: ");
-#else
-			tmp_pass = getpass("Key: ");
-#endif
-			if (tmp_pass != NULL) {
-+				break;
-+			case 'K':
-+				if ((tmp_env = getenv("IPMI_KGKEY"))) {
-+					if (kgkey) {
-+						free(kgkey);
-+						kgkey = NULL;
-+					}
-+					kgkey = strdup(tmp_env);
-+					if (kgkey == NULL) {
-+						lprintf(LOG_ERR, "%s: malloc failure", progname);
-+						goto out_free;
-+					}
-+				} else {
-+					lprintf(LOG_WARN, "Unable to read kgkey from environment");
-+				}
-+				break;
-+			case 'y':
- 				if (kgkey) {
- 					free(kgkey);
- 					kgkey = NULL;
- 				}
-				kgkey = strdup(tmp_pass);
-				tmp_pass = NULL;
-+				kgkey = ipmi_parse_hex(optarg);
- 				if (kgkey == NULL) {
-+					goto out_free;
-+				}
-+				break;
-+			case 'Y':
-+#ifdef HAVE_GETPASSPHRASE
-+				tmp_pass = getpassphrase("Key: ");
-+#else
-+				tmp_pass = getpass("Key: ");
-+#endif
-+				if (tmp_pass != NULL) {
-+					if (kgkey) {
-+						free(kgkey);
-+						kgkey = NULL;
-+					}
-+					kgkey = strdup(tmp_pass);
-+					tmp_pass = NULL;
-+					if (kgkey == NULL) {
-+						lprintf(LOG_ERR, "%s: malloc failure", progname);
-+						goto out_free;
-+					}
-+				}
-+				break;
-+			case 'U':
-+				if (username) {
-+					free(username);
-+					username = NULL;
-+				}
-+				if (strlen(optarg) > 16) {
-+					lprintf(LOG_ERR, "Username is too long (> 16 bytes)");
-+					goto out_free;
-+				}
-+				username = strdup(optarg);
-+				if (username == NULL) {
- 					lprintf(LOG_ERR, "%s: malloc failure", progname);
- 					goto out_free;
- 				}
-			}
-			break;
-		case 'U':
-			if (username) {
-				free(username);
-				username = NULL;
-			}
-			if (strlen(optarg) > 16) {
-				lprintf(LOG_ERR, "Username is too long (> 16 bytes)");
-				goto out_free;
-			}
-			username = strdup(optarg);
-			if (username == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-			break;
-		case 'S':
-			if (sdrcache) {
-				free(sdrcache);
-				sdrcache = NULL;
-			}
-			sdrcache = strdup(optarg);
-			if (sdrcache == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-			break;
-		case 'D':
-			/* check for subsequent instance of -D */
-			if (devfile) {
-				/* free memory for previous string */
-				free(devfile);
-			}
-			devfile = strdup(optarg);
-			if (devfile == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-			break;
-+				break;
-+			case 'S':
-+				if (sdrcache) {
-+					free(sdrcache);
-+					sdrcache = NULL;
-+				}
-+				sdrcache = strdup(optarg);
-+				if (sdrcache == NULL) {
-+					lprintf(LOG_ERR, "%s: malloc failure", progname);
-+					goto out_free;
-+				}
-+				break;
-+			case 'D':
-+				/* check for subsequent instance of -D */
-+				if (devfile) {
-+					/* free memory for previous string */
-+					free(devfile);
-+				}
-+				devfile = strdup(optarg);
-+				if (devfile == NULL) {
-+					lprintf(LOG_ERR, "%s: malloc failure", progname);
-+					goto out_free;
-+				}
-+				break;
- #ifdef ENABLE_ALL_OPTIONS
-		case 'o':
-			if (oemtype) {
-				free(oemtype);
-				oemtype = NULL;
-			}
-			oemtype = strdup(optarg);
-			if (oemtype == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-			if (strncmp(oemtype, "list", 4) == 0 ||
-					strncmp(oemtype, "help", 4) == 0) {
-				ipmi_oem_print();
-				rc = 0;
-				goto out_free;
-			}
-			break;
-		case 'g':
-			/* backwards compatible oem hack */
-			if (oemtype) {
-				free(oemtype);
-				oemtype = NULL;
-			}
-			oemtype = strdup("intelwv2");
-			break;
-		case 's':
-			/* backwards compatible oem hack */
-			if (oemtype) {
-				free(oemtype);
-				oemtype = NULL;
-			}
-			oemtype = strdup("supermicro");
-			break;
-		case 'P':
-			if (password) {
-				free(password);
-				password = NULL;
-			}
-			password = strdup(optarg);
-			if (password == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-
-			/* Prevent password snooping with ps */
-			i = strlen(optarg);
-			memset(optarg, 'X', i);
-			break;
-		case 'E':
-			if ((tmp_env = getenv("IPMITOOL_PASSWORD"))) {
-				if (password) {
-					free(password);
-					password = NULL;
-+			case 'o':
-+				if (oemtype) {
-+					free(oemtype);
-+					oemtype = NULL;
- 				}
-				password = strdup(tmp_env);
-				if (password == NULL) {
-+				oemtype = strdup(optarg);
-+				if (oemtype == NULL) {
- 					lprintf(LOG_ERR, "%s: malloc failure", progname);
- 					goto out_free;
- 				}
-			}
-			else if ((tmp_env = getenv("IPMI_PASSWORD"))) {
-+				if (strncmp(oemtype, "list", 4) == 0 ||
-+						strncmp(oemtype, "help", 4) == 0) {
-+					ipmi_oem_print();
-+					rc = 0;
-+					goto out_free;
-+				}
-+				break;
-+			case 'g':
-+				/* backwards compatible oem hack */
-+				if (oemtype) {
-+					free(oemtype);
-+					oemtype = NULL;
-+				}
-+				oemtype = strdup("intelwv2");
-+				break;
-+			case 's':
-+				/* backwards compatible oem hack */
-+				if (oemtype) {
-+					free(oemtype);
-+					oemtype = NULL;
-+				}
-+				oemtype = strdup("supermicro");
-+				break;
-+			case 'P':
- 				if (password) {
- 					free(password);
- 					password = NULL;
- 				}
-				password = strdup(tmp_env);
-+				password = strdup(optarg);
- 				if (password == NULL) {
- 					lprintf(LOG_ERR, "%s: malloc failure", progname);
- 					goto out_free;
- 				}
-			}
-			else {
-				lprintf(LOG_WARN, "Unable to read password from environment");
-			}
-			break;
-		case 'L':
-			i = strlen(optarg);
-			if ((i > 0) && (optarg[i-1] == '+')) {
-				lookupbit = 0;
-				optarg[i-1] = 0;
-			}
-			privlvl = str2val(optarg, ipmi_privlvl_vals);
-			if (privlvl == 0xFF) {
-				lprintf(LOG_WARN, "Invalid privilege level %s", optarg);
-			}
-			break;
-		case 'A':
-			authtype = str2val(optarg, ipmi_authtype_session_vals);
-			break;
-		case 't':
-			if (str2uchar(optarg, &target_addr) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-t'.");
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		case 'b':
-			if (str2uchar(optarg, &target_channel) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-b'.");
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		case 'T':
-			if (str2uchar(optarg, &transit_addr) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-T'.");
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		case 'B':
-			if (str2uchar(optarg, &transit_channel) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-B'.");
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		case 'l':
-			if (str2uchar(optarg, &target_lun) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-l'.");
-				rc = 1;
-				goto out_free;
-			}
-			break;
-		case 'm':
-			if (str2uchar(optarg, &arg_addr) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-m'.");
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		case 'e':
-			sol_escape_char = optarg[0];
-			break;
-		case 'O':
-			if (seloem) {
-				free(seloem);
-				seloem = NULL;
-			}
-			seloem = strdup(optarg);
-			if (seloem == NULL) {
-				lprintf(LOG_ERR, "%s: malloc failure", progname);
-				goto out_free;
-			}
-			break;
-		case 'z':
-			if (str2ushort(optarg, &my_long_packet_size) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-z'.");
-				rc = -1;
-				goto out_free;
-			}
-			break;
-		/* Retry and Timeout */
-		case 'R':
-			if (str2int(optarg, &retry) != 0 || retry < 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-R'.");
-				rc = -1;
-+
-+				/* Prevent password snooping with ps */
-+				i = strlen(optarg);
-+				memset(optarg, 'X', i);
-+				break;
-+			case 'E':
-+				if ((tmp_env = getenv("IPMITOOL_PASSWORD"))) {
-+					if (password) {
-+						free(password);
-+						password = NULL;
-+					}
-+					password = strdup(tmp_env);
-+					if (password == NULL) {
-+						lprintf(LOG_ERR, "%s: malloc failure", progname);
-+						goto out_free;
-+					}
-+				}
-+				else if ((tmp_env = getenv("IPMI_PASSWORD"))) {
-+					if (password) {
-+						free(password);
-+						password = NULL;
-+					}
-+					password = strdup(tmp_env);
-+					if (password == NULL) {
-+						lprintf(LOG_ERR, "%s: malloc failure", progname);
-+						goto out_free;
-+					}
-+				}
-+				else {
-+					lprintf(LOG_WARN, "Unable to read password from environment");
-+				}
-+				break;
-+			case 'L':
-+				i = strlen(optarg);
-+				if ((i > 0) && (optarg[i-1] == '+')) {
-+					lookupbit = 0;
-+					optarg[i-1] = 0;
-+				}
-+				privlvl = str2val(optarg, ipmi_privlvl_vals);
-+				if (privlvl == 0xFF) {
-+					lprintf(LOG_WARN, "Invalid privilege level %s", optarg);
-+				}
-+				break;
-+			case 'A':
-+				authtype = str2val(optarg, ipmi_authtype_session_vals);
-+				break;
-+			case 't':
-+				if (str2uchar(optarg, &target_addr) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-t'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'b':
-+				if (str2uchar(optarg, &target_channel) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-b'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'T':
-+				if (str2uchar(optarg, &transit_addr) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-T'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'B':
-+				if (str2uchar(optarg, &transit_channel) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-B'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'l':
-+				if (str2uchar(optarg, &target_lun) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-l'.");
-+					rc = 1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'm':
-+				if (str2uchar(optarg, &arg_addr) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-m'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'e':
-+				sol_escape_char = optarg[0];
-+				break;
-+			case 'O':
-+				if (seloem) {
-+					free(seloem);
-+					seloem = NULL;
-+				}
-+				seloem = strdup(optarg);
-+				if (seloem == NULL) {
-+					lprintf(LOG_ERR, "%s: malloc failure", progname);
-+					goto out_free;
-+				}
-+				break;
-+			case 'z':
-+				if (str2ushort(optarg, &my_long_packet_size) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-z'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			/* Retry and Timeout */
-+			case 'R':
-+				if (str2int(optarg, &retry) != 0 || retry < 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-R'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+			case 'N':
-+				if (str2uint(optarg, &timeout) != 0) {
-+					lprintf(LOG_ERR, "Invalid parameter given or out of range for '-N'.");
-+					rc = -1;
-+					goto out_free;
-+				}
-+				break;
-+#endif
-+			default:
-+				ipmi_option_usage(progname, cmdlist, intflist);
- 				goto out_free;
- 			}
-			break;
-		case 'N':
-			if (str2uint(optarg, &timeout) != 0) {
-				lprintf(LOG_ERR, "Invalid parameter given or out of range for '-N'.");
-				rc = -1;
-				goto out_free;
-+		}
-+
-+		/* support additional arguments from environment */
-+		if (argecnt == 0) {
-+			argestr = getenv("IPMITOOL_ARGV");
-+			if (argestr != NULL) {
-+				argecnt = 0;
-+				arge = malloc(sizeof(char*)*(argecnt+2));
-+				arge[argecnt++] = "ipmitool-env";
-+				arge[argecnt] = NULL;
-+				while ((arge[argecnt] = strsep(&argestr, " ")) != NULL) {
-+					narge = realloc(arge, sizeof(char*)*(argecnt+2));
-+					if (narge == NULL) {
-+						free(arge);
-+						lprintf(LOG_ERR, "Problem while resizing options from environment.\n");
-+						rc = -1;
-+						goto out_free;
-+					} else {
-+						arge = narge;
-+					}
-+					arge[++argecnt] = NULL;
-+				}
- 			}
-			break;
-#endif
-		default:
-			ipmi_option_usage(progname, cmdlist, intflist);
-			goto out_free;
- 		}
-+
-+	} while ((argecnt>1) && (arg != arge));
-+	if (NULL != arge) {
-+		optind = voptind;
- 	}
- 
- 	/* check for command before doing anything */
--- a/ipmitool.spec
+++ b/ipmitool.spec
@ -1,11 +1,13 @@
+%global       gitname     IPMITOOL
+%global       gitversion  1_8_18
+
 Name:         ipmitool
 Summary:      Utility for IPMI control
-Version:      1.8.15
-Release:      1%{?dist}
+Version:      1.8.18
+Release:      15%{?dist}
 License:      BSD
-Group:        System Environment/Base
 URL:          http://ipmitool.sourceforge.net/
-Source0:      http://downloads.sourceforge.net/project/%{name}/%{name}/%{version}/%{name}-%{version}.tar.bz2
+Source0:      https://github.com/%{name}/%{name}/archive/%{gitname}_%{gitversion}/%{name}-%{version}.tar.gz
 Source1:      openipmi-ipmievd.sysconf
 Source2:      ipmievd.service
 Source3:      exchange-bmc-os-info.service
@ -13,31 +15,23 @@ Source4:      exchange-bmc-os-info.sysconf
 Source5:      set-bmc-url.sh
 Source6:      exchange-bmc-os-info

+Patch1:       0001-CVE-2011-4339-OpenIPMI.patch
+# WARNING:  THIS PATCH MUST BE USED FOR RAWHIDE (f26+) BRANCH
+Patch2:       0002-openssl.patch
+Patch3:       0003-ipmitool-1.8.11-set-kg-key.patch
+Patch4:       0004-slowswid.patch
+Patch5:       0005-sensor-id-length.patch
+Patch6:       0006-enable-usb.patch
+Patch7:       0007-check-input.patch
+
 BuildRequires: openssl-devel readline-devel ncurses-devel
-BuildRequires: systemd-units
+%{?systemd_requires}
+BuildRequires: systemd
 # bootstrap
 BuildRequires: automake autoconf libtool
-Requires:OpenIPMI-modalias
-Requires(post): systemd-sysv
-Requires(post): systemd-units
-Requires(preun): systemd-units
-Requires(postun): systemd-units
 Obsoletes: OpenIPMI-tools < 2.0.14-3
 Provides: OpenIPMI-tools = 2.0.14-3

-Patch1: ipmitool-1.8.10-ipmievd-init.patch
-Patch2: ipmitool-1.8.10-ipmievd-condrestart.patch
-Patch3: ipmitool-1.8.11-remove-umask0.patch
-# various threads. still pending.
-#Patch4: cxoem-jb-cx6.patch
-# pending
-#Patch5: ipmitool-1.8.12-fips.patch
-# pending
-#Patch6: ipmitool-1.8.12-fipsman.patch
-# pending https://sourceforge.net/p/ipmitool/bugs/280/
-#Patch7: ipmitool-1.8.13-dualbridgedoc.patch
-# TODO
-Patch8: ipmitool-1.8.13-envarg.patch

 %description
 This package contains a utility for interfacing with devices that support
@ -54,10 +48,20 @@ displaying sensor values, displaying the contents of the System Event
 Log (SEL), printing Field Replaceable Unit (FRU) information, reading and
 setting LAN configuration, and chassis power control.

+
+%package -n ipmievd
+Requires: ipmitool
+%{?systemd_requires}
+BuildRequires: systemd
+Summary: IPMI event daemon for sending events to syslog
+%description -n ipmievd
+ipmievd is a daemon which will listen for events from the BMC that are
+being  sent to the SEL and also log those messages to syslog.
+
+
 %package -n bmc-snmp-proxy
 Requires: net-snmp
 Requires: exchange-bmc-os-info
-Requires:OpenIPMI-modalias
 BuildArch: noarch
 Summary: Reconfigure SNMP to include host SNMP agent within BMC
 %description -n bmc-snmp-proxy
@ -67,13 +71,10 @@ of net-snmp to include redirections to BMC based SNMP.

 %package -n exchange-bmc-os-info
 Requires: hostname
-Requires: ipmitool OpenIPMI
-Requires:OpenIPMI-modalias
+Requires: ipmitool
 BuildArch: noarch
-Requires(post): systemd-sysv
-Requires(post): systemd-units
-Requires(preun): systemd-units
-Requires(postun): systemd-units
+%{?systemd_requires}
+BuildRequires: systemd

 Summary: Let OS and BMC exchange info

@ -84,16 +85,7 @@ for the host OS to use.


 %prep
-
-%setup -q
-%patch1 -p1 -b .ipmievd-init
-%patch2 -p0 -b .condrestart
-%patch3 -p1 -b .umask
-#patch4 -p1 -b .cxoem
-#patch5 -p0 -b .fips
-#patch6 -p0 -b .fipsman
-#patch7 -p1 -b .dualbridgedoc
-%patch8 -p1 -b .argenv
+%autosetup -n %{name}-%{gitname}_%{gitversion} -p1

 for f in AUTHORS ChangeLog; do
    iconv -f iso-8859-1 -t utf8 < ${f} > ${f}.utf8
@ -135,13 +127,13 @@ install -Dm 644 contrib/bmc-snmp-proxy.sysconf %{buildroot}%{_sysconfdir}/syscon
 install -Dm 644 contrib/bmc-snmp-proxy.service %{buildroot}%{_unitdir}/bmc-snmp-proxy.service
 install -Dm 755 contrib/bmc-snmp-proxy         %{buildroot}%{_libexecdir}/bmc-snmp-proxy

-%post
+%post -n ipmievd
 %systemd_post ipmievd.service

-%preun
+%preun -n ipmievd
 %systemd_preun ipmievd.service

-%postun
+%postun -n ipmievd
 %systemd_postun_with_restart ipmievd.service

 %post -n exchange-bmc-os-info
@ -165,14 +157,17 @@ install -Dm 755 contrib/bmc-snmp-proxy         %{buildroot}%{_libexecdir}/bmc-sn
 /bin/systemctl try-restart ipmievd.service >/dev/null 2>&1 || :

 %files
-%config(noreplace) %{_sysconfdir}/sysconfig/ipmievd
-%{_unitdir}/ipmievd.service
-%{_bindir}/*
-%{_sbindir}/*
-%{_mandir}/man*/*
+%{_bindir}/ipmitool
+%{_mandir}/man1/ipmitool.1*
 %doc %{_datadir}/doc/ipmitool
 %{_datadir}/ipmitool

+%files -n ipmievd
+%config(noreplace) %{_sysconfdir}/sysconfig/ipmievd
+%{_unitdir}/ipmievd.service
+%{_sbindir}/ipmievd
+%{_mandir}/man8/ipmievd.8*
+
 %files -n exchange-bmc-os-info
 %config(noreplace) %{_sysconfdir}/sysconfig/exchange-bmc-os-info
 %{_sysconfdir}/profile.d/set-bmc-url.sh
@ -185,6 +180,76 @@ install -Dm 755 contrib/bmc-snmp-proxy         %{buildroot}%{_libexecdir}/bmc-sn
 %{_libexecdir}/bmc-snmp-proxy

 %changelog
+* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.18-15
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Sun Feb 17 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 1.8.18-14
+- Rebuild for readline 8.0
+
+* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.18-13
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.18-12
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Tue Apr 10 2018 Josef Ridky <jridky@redhat.com> - 1.8.18-11
+- Project moved to github
+
+* Thu Feb 22 2018 Josef Ridky <jridky@redhat.com> - 1.8.18-10
+- Spec clean up
+- Add support to set kg key
+- Fix DDR4 memory issues
+- Increase length of sensor id
+- Enable usb interface by default
+- Fix input options 
+
+* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.18-9
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Tue Jan 30 2018 Josef Ridky <jridky@redhat.com> - 1.8.18-8
+- remove old systemd dependencies
+
+* Wed Aug 02 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.18-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
+
+* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.18-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Tue Feb 21 2017 Josef Ridky <jridky@redhat.com> - 1.8.18-5
+- Fix allocation issue
+
+* Tue Feb 21 2017 Josef Ridky <jridky@redhat.com> - 1.8.18-4
+- Add support for OpenSSL-1.1.0 library (#1423743)
+
+* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.18-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Thu Jan 12 2017 Igor Gnatenko <ignatenko@redhat.com> - 1.8.18-2
+- Rebuild for readline 7.x
+
+* Mon Oct 10 2016 Boris Ranto <branto@redhat.com> - 0:1.8.18-1
+- New version (0:1.8.18-1)
+- CVE-2011-4339 OpenIPMI
+
+* Tue May 10 2016 Boris Ranto <branto@redhat.com> - 0:1.8.17-1
+- New version (0:1.8.17-1)
+- CVE-2011-4339 OpenIPMI
+
+* Tue Feb 23 2016 Boris Ranto <branto@redhat.com> - 1.8.16-1
+- Rebase to version 1.8.16
+
+* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.15-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Tue Nov 24 2015 Boris Ranto <branto@redhat.com> - 1.8.15-5
+- Split ipmievd bits into a separate package
+
+* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.8.15-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Wed Apr 22 2015 Ales Ledvinka <aledvink@redhat.com> 1.8.15-3
+- Remove modalias dependency.
+
 * Thu Mar 19 2015 Ales Ledvinka <aledvink@redhat.com> 1.8.15-1
 - Upstream release 1.8.15

--- a/10
+++ b/10
@ -1,5 +1,5 @@
-fcfca92bef56b9e9e57ec71f21636cc8  ipmitool-1.8.15.tar.bz2
-95bd2072031533893cd9d5d9c9603d92  exchange-bmc-os-info
-6598ee7c4ba2c8f69ef2ad48e502cada  exchange-bmc-os-info.service
-3a728964cb3990f3fd6febef36b4e8af  exchange-bmc-os-info.sysconf
-b8943d4efa72aa65e2409194f8d30bdb  set-bmc-url.sh
+SHA512 (exchange-bmc-os-info) = 77aad6f132b0ab56dcf8f8a5d1efbba9196c2fbb5771e5106833455a071a5dc79109d945a7adc0022f9604cbfd4a01ea1ea54ce15a2409c85f5effbf6cfc4f09
+SHA512 (exchange-bmc-os-info.service) = 4349e7be9879c55c64e6233f749db7d656a12b421ad53a41d612e8c891abbe108d0fabe57d5753b5c1367da4f34e2e3bb579ea4ba8bc39b81ec64b66d5f65f79
+SHA512 (exchange-bmc-os-info.sysconf) = 475f5645eb6a7038efe5568950235fa43a081f26490b7e17de2279e022950144f197e1a545177447ce1ec345862e7fb8fb802eaa3728bc9e32868e34c081263a
+SHA512 (set-bmc-url.sh) = 99bceee522b23e0c4bc55f9e4bdc08ece9ecbf8a50511fa8f8b90ecc94d8f9715e74bb15a5f1e7c2162e7ac2e1933aff0c78b464e1010f21c784d84c0b1bfe2a
+SHA512 (ipmitool-1.8.18.tar.gz) = 2f2b9c4ce76eb2afdac168edbd41241352c2d4d18286494ffb57dcf750f18448d144543faa8a5494f077c78a4f5ae730624d3798ba6e621249c42fd868d86406
Author	SHA1	Message	Date
Fedora Release Engineering	5c02a0d905	- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>	2019-07-25 09:39:07 +00:00
Dan Horák	8cee7f09ee	reupload sources	2019-02-19 10:18:15 +01:00
Dan Horák	e8d2d52248	fix source URL	2019-02-19 10:13:27 +01:00
Dan Horák	a6f8ed8ba2	fix source URL	2019-02-19 10:12:48 +01:00
Igor Gnatenko	2e9bcf86b5	Rebuild for readline 8.0	2019-02-17 09:30:50 +01:00
Fedora Release Engineering	1a2a044b6b	- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>	2019-02-01 03:29:27 +00:00
Fedora Release Engineering	0db0eb3475	- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>	2018-07-13 05:48:08 +00:00
Josef Ridky	fe497d75ae	Project moved to github	2018-04-10 08:27:18 +02:00
Josef Ridky	a00982d723	Use autosetup in spec	2018-02-22 12:43:43 +01:00
Josef Ridky	41cfa0421a	Fix wrong input options	2018-02-22 12:40:54 +01:00
Josef Ridky	01bcaadcd5	Enable usb interface by default	2018-02-22 12:33:21 +01:00
Josef Ridky	a35803fa49	Increase size of sensor id length	2018-02-22 12:30:12 +01:00
Josef Ridky	fd956f66e8	Add fix for DDR4 memory devices	2018-02-22 12:26:21 +01:00
Josef Ridky	f69359d427	Add support to set kg key	2018-02-22 12:20:04 +01:00
Fedora Release Engineering	5a38393f9f	- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>	2018-02-07 17:35:40 +00:00
Josef Ridky	25b8ee3616	fix changelog date	2018-01-30 09:17:59 +01:00
Josef Ridky	54b8764329	merge	2018-01-30 09:16:12 +01:00
Josef Ridky	8a5b97ff1d	Remove old systemd dependencies	2018-01-30 09:14:46 +01:00
Fedora Release Engineering	f59257dd8f	- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild	2017-08-02 23:50:18 +00:00
Fedora Release Engineering	192de33590	- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild	2017-07-26 13:39:02 +00:00
Josef Ridky	9bcdb1e727	Fix issue with allocation	2017-02-21 11:44:58 +01:00
Josef Ridky	a88b605091	Add warning to spec file	2017-02-21 09:37:34 +01:00
Josef Ridky	a81a4241f5	Resolves: #1423743 - add support for OpenSSL-1.1.0 library	2017-02-21 09:36:04 +01:00
Fedora Release Engineering	ea9cfff90d	- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild	2017-02-10 16:31:07 +00:00
Igor Gnatenko	73de54b95c	Rebuild for readline 7.x Signed-off-by: Igor Gnatenko <ignatenko@redhat.com>	2017-01-12 17:30:31 +01:00
Boris Ranto	27e4cacf97	New version (0:1.8.18-1) - CVE-2011-4339 OpenIPMI Resolves: rhbz#1382983	2016-10-10 10:50:11 +02:00
Boris Ranto	39b15aa909	New version (0:1.8.17-1) - CVE-2011-4339 OpenIPMI	2016-05-10 19:13:48 +02:00
Boris Ranto	10c4114768	Rebase to version 1.8.16 We're also dropping argenv patch. Upstream changed its mind about that approach and so should we. Resolves: rhbz#1310276	2016-02-23 04:10:04 +01:00
Dennis Gilmore	2c475f7497	- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild	2016-02-04 00:36:38 +00:00
Boris Ranto	a0083f96c1	Split ipmievd bits into a separate package Resolves: rhbz#1272425	2015-11-24 22:38:11 +01:00
Dennis Gilmore	f66a1a9043	- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild	2015-06-17 11:30:45 +00:00
Ales Ledvinka	974a4bf244	Resolves: #1213993	2015-04-22 13:42:49 +02:00
Ales Ledvinka	5faf92219d	Resolves: #1213993	2015-04-22 13:39:02 +02:00