From 529e352161d6f2671fff3d607ed1a4bd9c0818a8 Mon Sep 17 00:00:00 2001 From: Peter Jones Date: Wed, 10 Jun 2015 11:25:55 -0400 Subject: [PATCH] Update to 8.40-1 Resolves: rhbz#1214950 Signed-off-by: Peter Jones --- ...e-last-element-of-indexVars-in-findE.patch | 41 -- ...-kernel-core-as-identical-in-terms-o.patch | 39 -- 0002-Add-bls-test-harness-bits.patch | 452 ------------------ ...initrd-updating-when-multiboot-exist.patch | 37 -- ...better-fib-about-default-bootloader-.patch | 46 -- ...te-actually-return-the-saved-default.patch | 35 -- 0006-Revert-Add-bls-test-harness-bits.patch | 446 ----------------- 0007-Always-error-check-getLineByType.patch | 32 -- ...-devtree-support-to-extlinux-1088933.patch | 155 ------ ...devicetree-directories-for-use-on-ar.patch | 194 -------- ...ling-to-work-in-the-supported-usecas.patch | 56 --- grubby.spec | 19 +- sources | 2 +- 13 files changed, 7 insertions(+), 1547 deletions(-) delete mode 100644 0001-Don-t-go-past-the-last-element-of-indexVars-in-findE.patch delete mode 100644 0001-Treat-kernel-and-kernel-core-as-identical-in-terms-o.patch delete mode 100644 0002-Add-bls-test-harness-bits.patch delete mode 100644 0003-grubby-fix-initrd-updating-when-multiboot-exist.patch delete mode 100644 0004-Tell-a-slightly-better-fib-about-default-bootloader-.patch delete mode 100644 0005-Make-findTemplate-actually-return-the-saved-default.patch delete mode 100644 0006-Revert-Add-bls-test-harness-bits.patch delete mode 100644 0007-Always-error-check-getLineByType.patch delete mode 100644 0008-Add-devtree-support-to-extlinux-1088933.patch delete mode 100644 0009-add-support-for-devicetree-directories-for-use-on-ar.patch delete mode 100644 0010-cleanup-dtb-handling-to-work-in-the-supported-usecas.patch diff --git a/0001-Don-t-go-past-the-last-element-of-indexVars-in-findE.patch b/0001-Don-t-go-past-the-last-element-of-indexVars-in-findE.patch deleted file mode 100644 index 616371c..0000000 --- a/0001-Don-t-go-past-the-last-element-of-indexVars-in-findE.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 639b9ab2462d4dddd8b8cff04e8db352cb6dc5d5 Mon Sep 17 00:00:00 2001 -From: Yannick Brosseau -Date: Thu, 3 Jul 2014 13:55:19 -0700 -Subject: [PATCH 01/10] Don't go past the last element of indexVars in - findEntryByPath - -We add a chance of creating an infinite loop, because we -were reading memory past the last element of indexVars set to -1. - -This issue was only apparent with -O2, probably because the way the -memory was initialized. - -Signed-off-by: Yannick Brosseau ---- - grubby.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - -diff --git a/grubby.c b/grubby.c -index 88a1f08..db91364 100644 ---- a/grubby.c -+++ b/grubby.c -@@ -1959,11 +1959,13 @@ struct singleEntry * findEntryByPath(struct grubConfig * config, - } - - indexVars[i + 1] = -1; -- -+ - i = 0; - if (index) { -- while (i < *index) i++; -- if (indexVars[i] == -1) return NULL; -+ while (i < *index) { -+ i++; -+ if (indexVars[i] == -1) return NULL; -+ } - } - - entry = findEntryByIndex(config, indexVars[i]); --- -1.9.3 - diff --git a/0001-Treat-kernel-and-kernel-core-as-identical-in-terms-o.patch b/0001-Treat-kernel-and-kernel-core-as-identical-in-terms-o.patch deleted file mode 100644 index e959dd4..0000000 --- a/0001-Treat-kernel-and-kernel-core-as-identical-in-terms-o.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 15d36a8f27c5b14b290da99c4be8880bc35dc41b Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Mon, 27 Oct 2014 18:10:00 -0400 -Subject: [PATCH] Treat kernel and kernel-core as identical in terms of - --make-default - -Depending on which kernel version, we'll either get kernel or -kernel-core as --package. Since we're unlikely to call something -kernel-core-core, just treat them the same. - -Resolves: rhbz#1141414 - -Signed-off-by: Peter Jones ---- - new-kernel-pkg | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - -diff --git a/new-kernel-pkg b/new-kernel-pkg -index 70f6118..9f3b192 100755 ---- a/new-kernel-pkg -+++ b/new-kernel-pkg -@@ -797,9 +797,11 @@ if [ -n "$dracut" -o -n "$adddracutargs" ]; then - fi - - # set this as the default if we have the package and it matches --if [ "$mode" == "--install" -a "$UPDATEDEFAULT" == "yes" -a -n "$package" -a -n "$DEFAULTKERNEL" -a "$package" == "$DEFAULTKERNEL" ]; then -- makedefault="--make-default" -- [ -n "$verbose" ] && echo "making it the default based on config" -+if [ "$mode" == "--install" -a "$UPDATEDEFAULT" == "yes" -a -n "$package" -a -n "$DEFAULTKERNEL" ]; then -+ if [ "$package" == "$DEFAULTKERNEL" -o "${package}-core" == "$DEFAULTKERNEL" ]; then -+ makedefault="--make-default" -+ [ -n "$verbose" ] && echo "making it the default based on config" -+ fi - fi - - if [ "$moddep" == "make" ]; then --- -1.9.3 - diff --git a/0002-Add-bls-test-harness-bits.patch b/0002-Add-bls-test-harness-bits.patch deleted file mode 100644 index e129e93..0000000 --- a/0002-Add-bls-test-harness-bits.patch +++ /dev/null @@ -1,452 +0,0 @@ -From 0e5c50b8dff5208b915391e3b592790bdf174cf4 Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Tue, 8 Jul 2014 14:37:21 -0400 -Subject: [PATCH 02/10] Add bls test harness bits. - -This expects that there are bls config files and that grubby knows how -to deal with them, which isn't at all true, and so the test case -currently fails because test/grub2.15 doesn't provide any kernel stanzas -whatsoever. - -Maybe I should add a dummy there, but... I'd rather leave this failing -here. - -Signed-off-by: Peter Jones ---- - test.sh | 105 +++++++++++++++++++ - ...724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf | 8 ++ - ...724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf | 8 ++ - ...981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf | 10 ++ - ...981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf | 10 ++ - test/grub2.15 | 112 +++++++++++++++++++++ - test/results/grub2.15 | 112 +++++++++++++++++++++ - 7 files changed, 365 insertions(+) - create mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf - create mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf - create mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf - create mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf - create mode 100644 test/grub2.15 - create mode 100644 test/results/grub2.15 - -diff --git a/test.sh b/test.sh -index 864a8ce..e7be15f 100755 ---- a/test.sh -+++ b/test.sh -@@ -163,6 +163,102 @@ for b in $(./grubby --help | \ - eval "${b}DisplayTest() { [[ \"$b\" == \$opt_bootloader ]] && oneDisplayTest --$b \"\$@\"; }" - done - -+grub2BlsTest() { -+ declare blsdir=$(mktemp -d) cmpdir=$(mktemp -d) -+ -+ declare blspairs="" -+ while [ -n "$1" ]; do -+ if [ "$1" == "--blspair" ]; then -+ blsin=$(echo $2 | sed 's/\(.*\),.*/\1/') -+ blsout=$(echo $2 | sed 's/[^,]*,\(.*\)/\1/') -+ [ -n "$blsin" ] && cp "test/grub2-support_files/$blsin" ${blsdir}/ -+ [ -n "$blsout" ] && cp "test/grub2-support_files/$blsout" ${cmpdir}/ -+ blspairs="${blspairs} $2" -+ shift 2 -+ else -+ break -+ fi -+ done -+ -+ typeset mode=$1 cfg=test/$2 correct=test/results/$3 -+ shift 3 -+ -+ local ENV_FILE="" -+ if [ "$mode" == "--grub2" ]; then -+ ENV_FILE="test/grub2-support_files/env_temp" -+ if [ "$1" == "--env" ]; then -+ cp "test/grub2-support_files/$2" "$ENV_FILE" -+ shift 2 -+ else -+ cp "test/grub2-support_files/grubenv.0" "$ENV_FILE" -+ fi -+ ENV_FILE="--env=$ENV_FILE" -+ fi -+ -+ declare outfile=$(mktemp) -+ echo "$testing ... $mode bls $cfg $correct" -+ runme=( ./grubby "$mode" --bad-image-okay $ENV_FILE -c "$cfg" -o - --blsdir="${blsdir}" "$@" ) -+ declare -i old_fail=$fail -+ if "${runme[@]}" 2>&1 | cmp "$correct" > /dev/null; then -+ (( pass++ )) -+ if $opt_verbose; then -+ echo ------------------------------------------------------------- -+ echo -n "PASS: " -+ printf "%q " "${runme[@]}"; echo -+ "${runme[@]}" 2>&1 | diff -U30 "$cfg" - -+ echo -+ fi -+ else -+ (( fail++ )) -+ echo ------------------------------------------------------------- -+ echo -n "FAIL: " -+ printf "%q " "${runme[@]}"; echo -+ "${runme[@]}" 2>&1 | diff -U30 "$correct" - -+ echo -+ fi -+ -+ for pair in ${blspairs} ; do -+ blsin=$(echo $pair | sed 's/\(.*\),.*/\1/') -+ blsout=$(echo $pair | sed 's/[^,]*,\(.*\)/\1/') -+ -+ if [ -z "${blsout}" -a -f ${blsdir}/${blsin} ]; then -+ (( fail++ )) -+ echo ------------------------------------------------------------- -+ echo -n "FAIL: " -+ printf "%q " "${runme[@]}"; echo -+ diff -U30 /dev/null ${blsdir}/${blsin} -+ elif [ -n "${blsout}" ] && ! cmp ${blsdir}/${blsout} ${cmpdir}/${blsout} >/dev/null ; then -+ (( fail++ )) -+ echo ------------------------------------------------------------- -+ echo -n "FAIL: " -+ printf "%q " "${runme[@]}"; echo -+ diff -U30 "${cmpdir}/${blsout}" "${blsdir}/${blsout}" -+ else -+ (( pass++ )) -+ if $opt_verbose; then -+ echo ------------------------------------------------------------- -+ echo -n "PASS: " -+ printf "%q " "${runme[@]}"; echo -+ diff -U30 "${cmpdir}/${blsout}" "${blsdir}/${blsout}" -+ fi -+ fi -+ done -+ -+ if [ $old_fail -eq $fail ]; then -+ (( pass++ )) -+ if $opt_verbose; then -+ echo ------------------------------------------------------------- -+ echo -n "PASS: " -+ printf "%q " "${runme[@]}"; echo -+ "${runme[@]}" 2>&1 | diff -U30 "$cfg" - -+ echo -+ fi -+ fi -+ -+ rm -rvf ${blsdir}/ ${cmpdir}/ -+} -+ -+ - #---------------------------------------------------------------------- - # Main - #---------------------------------------------------------------------- -@@ -533,6 +629,15 @@ if [ "$testgrub2" == "y" ]; then - grub2Test grub2.2 add/g2-1.4 --update-kernel=/boot/new-kernel.img \ - --initrd=/boot/new-initrd --boot-filesystem=/boot/ - -+ testing="GRUB2 add bls kernel+initrd" -+ grub2BlsTest \ -+ --blspair 6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf,6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf \ -+ --blspair ,6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf \ -+ --grub2 grub2.15 grub2.15 \ -+ --add-kernel=/boot/new-kernel.img \ -+ --title=title --initrd=/boot/new-initrd --boot-filesystem=/boot/ \ -+ --copy-default -+ - testing="GRUB2 display default index" - grub2DisplayTest grub2.1 defaultindex/0 --default-index - grub2DisplayTest grub2.2 defaultindex/0 --default-index -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf -new file mode 100644 -index 0000000..84b2bdf ---- /dev/null -+++ b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf -@@ -0,0 +1,8 @@ -+# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf -+title Fedora 19 (Rawhide) -+version 3.8.0-2.fc19.x86_64 -+machine-id 6a9857a393724b7a981ebb5b8495b9ea -+filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 -+linux /boot/vmlinux-3.8.0-2.fc19.x86_64 -+options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 -+initrd /boot/initrd-3.8.0-2.fc19.x86_64 -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf -new file mode 100644 -index 0000000..e1c61a8 ---- /dev/null -+++ b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf -@@ -0,0 +1,8 @@ -+# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf -+title Fedora 19 (Rawhide) -+version 3.8.1-2.fc19.x86_64 -+machine-id 6a9857a393724b7a981ebb5b8495b9ea -+filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 -+linux /boot/vmlinux-3.8.1-2.fc19.x86_64 -+options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 -+initrd /boot/initrd-3.8.1-2.fc19.x86_64 -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf -new file mode 100644 -index 0000000..4a60fbc ---- /dev/null -+++ b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf -@@ -0,0 +1,10 @@ -+# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf -+title Fedora 19 (tboot) (Rawhide) -+version 3.8.0-2.fc19.x86_64 -+machine-id 6a9857a393724b7a981ebb5b8495b9ea -+filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 -+multiboot /boot/tboot.gz -+ options logging=serial,vga,memory -+linux /boot/vmlinux-3.8.0-2.fc19.x86_64 -+options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 -+initrd /boot/initrd-3.8.0-2.fc19.x86_64 -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf -new file mode 100644 -index 0000000..34c0e09 ---- /dev/null -+++ b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf -@@ -0,0 +1,10 @@ -+# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf -+title Fedora 19 (tboot) (Rawhide) -+version 3.8.1-2.fc19.x86_64 -+machine-id 6a9857a393724b7a981ebb5b8495b9ea -+filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 -+multiboot /boot/tboot.gz -+ options logging=serial,vga,memory -+linux /boot/vmlinux-3.8.1-2.fc19.x86_64 -+options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 -+initrd /boot/initrd-3.8.1-2.fc19.x86_64 -diff --git a/test/grub2.15 b/test/grub2.15 -new file mode 100644 -index 0000000..0be2d74 ---- /dev/null -+++ b/test/grub2.15 -@@ -0,0 +1,112 @@ -+# -+# DO NOT EDIT THIS FILE -+# -+# It is automatically generated by grub2-mkconfig using templates -+# from /etc/grub.d and settings from /etc/default/grub -+# -+ -+### BEGIN /etc/grub.d/00_header ### -+if [ -s $prefix/grubenv ]; then -+ load_env -+fi -+if [ "${next_entry}" ] ; then -+ set default="${next_entry}" -+ set next_entry= -+ save_env next_entry -+ set boot_once=true -+else -+ set default="${saved_entry}" -+fi -+ -+if [ x"${feature_menuentry_id}" = xy ]; then -+ menuentry_id_option="--id" -+else -+ menuentry_id_option="" -+fi -+ -+export menuentry_id_option -+ -+if [ "${prev_saved_entry}" ]; then -+ set saved_entry="${prev_saved_entry}" -+ save_env saved_entry -+ set prev_saved_entry= -+ save_env prev_saved_entry -+ set boot_once=true -+fi -+ -+function savedefault { -+ if [ -z "${boot_once}" ]; then -+ saved_entry="${chosen}" -+ save_env saved_entry -+ fi -+} -+ -+function load_video { -+ if [ x$feature_all_video_module = xy ]; then -+ insmod all_video -+ else -+ insmod efi_gop -+ insmod efi_uga -+ insmod ieee1275_fb -+ insmod vbe -+ insmod vga -+ insmod video_bochs -+ insmod video_cirrus -+ fi -+} -+ -+if [ x$feature_default_font_path = xy ] ; then -+ font=unicode -+else -+insmod part_gpt -+insmod btrfs -+set root='hd0,gpt4' -+if [ x$feature_platform_search_hint = xy ]; then -+ search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 -+else -+ search --no-floppy --fs-uuid --set=root 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 -+fi -+ font="/root/usr/share/grub/unicode.pf2" -+fi -+ -+if loadfont $font ; then -+ set gfxmode=auto -+ load_video -+ insmod gfxterm -+ set locale_dir=$prefix/locale -+ set lang=en_US -+ insmod gettext -+fi -+terminal_output gfxterm -+set timeout=5 -+### END /etc/grub.d/00_header ### -+ -+### BEGIN /etc/grub.d/10_blscfg ### -+ -+bls_import -+ -+### END /etc/grub.d/10_blscfg ### -+ -+### BEGIN /etc/grub.d/20_linux_xen ### -+ -+### END /etc/grub.d/20_linux_xen ### -+ -+### BEGIN /etc/grub.d/20_ppc_terminfo ### -+### END /etc/grub.d/20_ppc_terminfo ### -+ -+### BEGIN /etc/grub.d/30_os-prober ### -+### END /etc/grub.d/30_os-prober ### -+ -+### BEGIN /etc/grub.d/40_custom ### -+# This file provides an easy way to add custom menu entries. Simply type the -+# menu entries you want to add after this comment. Be careful not to change -+# the 'exec tail' line above. -+### END /etc/grub.d/40_custom ### -+ -+### BEGIN /etc/grub.d/41_custom ### -+if [ -f ${config_directory}/custom.cfg ]; then -+ source ${config_directory}/custom.cfg -+elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then -+ source $prefix/custom.cfg; -+fi -+### END /etc/grub.d/41_custom ### -diff --git a/test/results/grub2.15 b/test/results/grub2.15 -new file mode 100644 -index 0000000..0be2d74 ---- /dev/null -+++ b/test/results/grub2.15 -@@ -0,0 +1,112 @@ -+# -+# DO NOT EDIT THIS FILE -+# -+# It is automatically generated by grub2-mkconfig using templates -+# from /etc/grub.d and settings from /etc/default/grub -+# -+ -+### BEGIN /etc/grub.d/00_header ### -+if [ -s $prefix/grubenv ]; then -+ load_env -+fi -+if [ "${next_entry}" ] ; then -+ set default="${next_entry}" -+ set next_entry= -+ save_env next_entry -+ set boot_once=true -+else -+ set default="${saved_entry}" -+fi -+ -+if [ x"${feature_menuentry_id}" = xy ]; then -+ menuentry_id_option="--id" -+else -+ menuentry_id_option="" -+fi -+ -+export menuentry_id_option -+ -+if [ "${prev_saved_entry}" ]; then -+ set saved_entry="${prev_saved_entry}" -+ save_env saved_entry -+ set prev_saved_entry= -+ save_env prev_saved_entry -+ set boot_once=true -+fi -+ -+function savedefault { -+ if [ -z "${boot_once}" ]; then -+ saved_entry="${chosen}" -+ save_env saved_entry -+ fi -+} -+ -+function load_video { -+ if [ x$feature_all_video_module = xy ]; then -+ insmod all_video -+ else -+ insmod efi_gop -+ insmod efi_uga -+ insmod ieee1275_fb -+ insmod vbe -+ insmod vga -+ insmod video_bochs -+ insmod video_cirrus -+ fi -+} -+ -+if [ x$feature_default_font_path = xy ] ; then -+ font=unicode -+else -+insmod part_gpt -+insmod btrfs -+set root='hd0,gpt4' -+if [ x$feature_platform_search_hint = xy ]; then -+ search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 -+else -+ search --no-floppy --fs-uuid --set=root 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 -+fi -+ font="/root/usr/share/grub/unicode.pf2" -+fi -+ -+if loadfont $font ; then -+ set gfxmode=auto -+ load_video -+ insmod gfxterm -+ set locale_dir=$prefix/locale -+ set lang=en_US -+ insmod gettext -+fi -+terminal_output gfxterm -+set timeout=5 -+### END /etc/grub.d/00_header ### -+ -+### BEGIN /etc/grub.d/10_blscfg ### -+ -+bls_import -+ -+### END /etc/grub.d/10_blscfg ### -+ -+### BEGIN /etc/grub.d/20_linux_xen ### -+ -+### END /etc/grub.d/20_linux_xen ### -+ -+### BEGIN /etc/grub.d/20_ppc_terminfo ### -+### END /etc/grub.d/20_ppc_terminfo ### -+ -+### BEGIN /etc/grub.d/30_os-prober ### -+### END /etc/grub.d/30_os-prober ### -+ -+### BEGIN /etc/grub.d/40_custom ### -+# This file provides an easy way to add custom menu entries. Simply type the -+# menu entries you want to add after this comment. Be careful not to change -+# the 'exec tail' line above. -+### END /etc/grub.d/40_custom ### -+ -+### BEGIN /etc/grub.d/41_custom ### -+if [ -f ${config_directory}/custom.cfg ]; then -+ source ${config_directory}/custom.cfg -+elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then -+ source $prefix/custom.cfg; -+fi -+### END /etc/grub.d/41_custom ### --- -1.9.3 - diff --git a/0003-grubby-fix-initrd-updating-when-multiboot-exist.patch b/0003-grubby-fix-initrd-updating-when-multiboot-exist.patch deleted file mode 100644 index 2560743..0000000 --- a/0003-grubby-fix-initrd-updating-when-multiboot-exist.patch +++ /dev/null @@ -1,37 +0,0 @@ -From e91855ce14df65d12f681c15dfba5b22a2b4a061 Mon Sep 17 00:00:00 2001 -From: Junxiao Bi -Date: Wed, 14 May 2014 16:44:21 +0800 -Subject: [PATCH 03/10] grubby: fix initrd updating when multiboot exist - -When using the following command to add an initrd for the kernel. -grubby --update-kernel=/boot/vmlinuz-2.6.32-431.17.1.el6.x86_64.debug - --initrd /boot/initramfs-2.6.32-431.17.1.el6.x86_64.debug.img - --add-multiboot=/boot/tboot.gz -The multiboot image /boot/tboot.gz is used as the key to search the -configure entry in grub.conf, this is wrong. There may be other kernels -also configure multiboot with the same name tboot.gz, if there index are -smaller than the target one, then that will make the initrd added to the -wrong kernel. Fix it to use kernel name as the search key. - -Signed-off-by: Junxiao Bi -Reviewed-by: John Haxby ---- - grubby.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/grubby.c b/grubby.c -index db91364..118cb84 100644 ---- a/grubby.c -+++ b/grubby.c -@@ -3311,7 +3311,7 @@ int addMBInitrd(struct grubConfig * cfg, const char *newMBKernel, - - if (!image) return 0; - -- for (; (entry = findEntryByPath(cfg, newMBKernel, prefix, &index)); index++) { -+ for (; (entry = findEntryByPath(cfg, image, prefix, &index)); index++) { - kernelLine = getLineByType(LT_MBMODULE, entry->lines); - if (!kernelLine) continue; - --- -1.9.3 - diff --git a/0004-Tell-a-slightly-better-fib-about-default-bootloader-.patch b/0004-Tell-a-slightly-better-fib-about-default-bootloader-.patch deleted file mode 100644 index 6c0e91f..0000000 --- a/0004-Tell-a-slightly-better-fib-about-default-bootloader-.patch +++ /dev/null @@ -1,46 +0,0 @@ -From dbd5b06ce590ca638e3c44746183f6f2379e820f Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Fri, 12 Sep 2014 15:50:05 -0400 -Subject: [PATCH 04/10] Tell a slightly better fib about default bootloader - config paths. - -It's not going to be right everywhere, but... whatever. - -Resolves: rhbz#1001664 -Signed-off-by: Peter Jones ---- - grubby.8 | 14 ++++++++------ - 1 file changed, 8 insertions(+), 6 deletions(-) - -diff --git a/grubby.8 b/grubby.8 -index c2b0155..bd5ccb8 100644 ---- a/grubby.8 -+++ b/grubby.8 -@@ -19,16 +19,18 @@ grubby \- command line tool for configuring grub, lilo, elilo, yaboot and zipl - - .SH DESCRIPTION - \fBgrubby\fR is a command line tool for updating and displaying information --about the configuration files for the \fBgrub\fR, \fBlilo\fR, \fBelilo\fR -+about the configuration files for the \fBgrub\fR, \fBlilo\fR, \fBelilo\fR - (ia64), \fByaboot\fR (powerpc) and \fBzipl\fR (s390) boot loaders. It - is primarily designed to be used from scripts which install new - kernels and need to find information about the current boot environment. - --On Intel x86 platforms, \fBgrub\fR is the default bootloader and the --configuration file is in \fB/boot/grub/grub.conf\fR. On Intel ia64 platforms, --\fBelilo\fR mode is used and the default location for the configuration file --is \fB/boot/grub/grub.conf\fR. On PowerPC platforms, \fByaboot\fR parsing --is used and the configuration file should be in \fB/etc/yaboot.conf\fR. -+On BIOS-based Intel x86 platforms, \fBgrub2\fR is the default bootloader and -+the configuration file is in \fB/boot/grub2/grub.cfg\fR. On UEFI-based Intel -+x86 platforms, \fBgrub2\fR is the default bootloader, and the configuration -+file is in \fB/boot/efi/EFI/redhat/grub.cfg\fR. On Intel ia64 platforms, -+\fBelilo\fR mode is used and the default location for the configuration file -+is \fB/boot/efi/EFI/redhat/elilo.conf\fR. On PowerPC platforms, \fByaboot\fR -+parsing is used and the configuration file should be in \fB/etc/yaboot.conf\fR. - - There are a number of ways to specify the kernel used for \fB-\-info\fR, - \fB-\-remove-kernel\fR, and \fB-\-update-kernel\fR. Specificying \fBDEFAULT\fR --- -1.9.3 - diff --git a/0005-Make-findTemplate-actually-return-the-saved-default.patch b/0005-Make-findTemplate-actually-return-the-saved-default.patch deleted file mode 100644 index ffa23c1..0000000 --- a/0005-Make-findTemplate-actually-return-the-saved-default.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 629922b6dc32e4209980d7198b7d2aabb722033a Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Mon, 15 Sep 2014 14:31:01 -0400 -Subject: [PATCH 05/10] Make findTemplate actually return the saved default. - -Really not sure why this wasn't returning here before; going into the -loop below is just going to clobber all that it's done. - -Related: rhbz#957681 -Signed-off-by: Peter Jones ---- - grubby.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - -diff --git a/grubby.c b/grubby.c -index 118cb84..baf646b 100644 ---- a/grubby.c -+++ b/grubby.c -@@ -2119,8 +2119,12 @@ struct singleEntry * findTemplate(struct grubConfig * cfg, const char * prefix, - } else { - entry = findEntryByTitle(cfg, defTitle, &index); - } -- if (entry) -+ if (entry && suitableImage(entry, prefix, skipRemoved, flags)) { - cfg->defaultImage = index; -+ if (indexPtr) -+ *indexPtr = index; -+ return entry; -+ } - } - } - } else if (cfg->defaultImage > -1) { --- -1.9.3 - diff --git a/0006-Revert-Add-bls-test-harness-bits.patch b/0006-Revert-Add-bls-test-harness-bits.patch deleted file mode 100644 index 57aa733..0000000 --- a/0006-Revert-Add-bls-test-harness-bits.patch +++ /dev/null @@ -1,446 +0,0 @@ -From 0950d2e8693339a36f59c966dc8558263331665c Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Mon, 15 Sep 2014 16:49:26 -0400 -Subject: [PATCH 06/10] Revert "Add bls test harness bits." - -This wasn't supposed to be pushed to master yet. woops. - -This reverts commit 98cab84501f86bd98f12653c11f4ecc632139399. ---- - test.sh | 105 ------------------- - ...724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf | 8 -- - ...724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf | 8 -- - ...981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf | 10 -- - ...981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf | 10 -- - test/grub2.15 | 112 --------------------- - test/results/grub2.15 | 112 --------------------- - 7 files changed, 365 deletions(-) - delete mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf - delete mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf - delete mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf - delete mode 100644 test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf - delete mode 100644 test/grub2.15 - delete mode 100644 test/results/grub2.15 - -diff --git a/test.sh b/test.sh -index e7be15f..864a8ce 100755 ---- a/test.sh -+++ b/test.sh -@@ -163,102 +163,6 @@ for b in $(./grubby --help | \ - eval "${b}DisplayTest() { [[ \"$b\" == \$opt_bootloader ]] && oneDisplayTest --$b \"\$@\"; }" - done - --grub2BlsTest() { -- declare blsdir=$(mktemp -d) cmpdir=$(mktemp -d) -- -- declare blspairs="" -- while [ -n "$1" ]; do -- if [ "$1" == "--blspair" ]; then -- blsin=$(echo $2 | sed 's/\(.*\),.*/\1/') -- blsout=$(echo $2 | sed 's/[^,]*,\(.*\)/\1/') -- [ -n "$blsin" ] && cp "test/grub2-support_files/$blsin" ${blsdir}/ -- [ -n "$blsout" ] && cp "test/grub2-support_files/$blsout" ${cmpdir}/ -- blspairs="${blspairs} $2" -- shift 2 -- else -- break -- fi -- done -- -- typeset mode=$1 cfg=test/$2 correct=test/results/$3 -- shift 3 -- -- local ENV_FILE="" -- if [ "$mode" == "--grub2" ]; then -- ENV_FILE="test/grub2-support_files/env_temp" -- if [ "$1" == "--env" ]; then -- cp "test/grub2-support_files/$2" "$ENV_FILE" -- shift 2 -- else -- cp "test/grub2-support_files/grubenv.0" "$ENV_FILE" -- fi -- ENV_FILE="--env=$ENV_FILE" -- fi -- -- declare outfile=$(mktemp) -- echo "$testing ... $mode bls $cfg $correct" -- runme=( ./grubby "$mode" --bad-image-okay $ENV_FILE -c "$cfg" -o - --blsdir="${blsdir}" "$@" ) -- declare -i old_fail=$fail -- if "${runme[@]}" 2>&1 | cmp "$correct" > /dev/null; then -- (( pass++ )) -- if $opt_verbose; then -- echo ------------------------------------------------------------- -- echo -n "PASS: " -- printf "%q " "${runme[@]}"; echo -- "${runme[@]}" 2>&1 | diff -U30 "$cfg" - -- echo -- fi -- else -- (( fail++ )) -- echo ------------------------------------------------------------- -- echo -n "FAIL: " -- printf "%q " "${runme[@]}"; echo -- "${runme[@]}" 2>&1 | diff -U30 "$correct" - -- echo -- fi -- -- for pair in ${blspairs} ; do -- blsin=$(echo $pair | sed 's/\(.*\),.*/\1/') -- blsout=$(echo $pair | sed 's/[^,]*,\(.*\)/\1/') -- -- if [ -z "${blsout}" -a -f ${blsdir}/${blsin} ]; then -- (( fail++ )) -- echo ------------------------------------------------------------- -- echo -n "FAIL: " -- printf "%q " "${runme[@]}"; echo -- diff -U30 /dev/null ${blsdir}/${blsin} -- elif [ -n "${blsout}" ] && ! cmp ${blsdir}/${blsout} ${cmpdir}/${blsout} >/dev/null ; then -- (( fail++ )) -- echo ------------------------------------------------------------- -- echo -n "FAIL: " -- printf "%q " "${runme[@]}"; echo -- diff -U30 "${cmpdir}/${blsout}" "${blsdir}/${blsout}" -- else -- (( pass++ )) -- if $opt_verbose; then -- echo ------------------------------------------------------------- -- echo -n "PASS: " -- printf "%q " "${runme[@]}"; echo -- diff -U30 "${cmpdir}/${blsout}" "${blsdir}/${blsout}" -- fi -- fi -- done -- -- if [ $old_fail -eq $fail ]; then -- (( pass++ )) -- if $opt_verbose; then -- echo ------------------------------------------------------------- -- echo -n "PASS: " -- printf "%q " "${runme[@]}"; echo -- "${runme[@]}" 2>&1 | diff -U30 "$cfg" - -- echo -- fi -- fi -- -- rm -rvf ${blsdir}/ ${cmpdir}/ --} -- -- - #---------------------------------------------------------------------- - # Main - #---------------------------------------------------------------------- -@@ -629,15 +533,6 @@ if [ "$testgrub2" == "y" ]; then - grub2Test grub2.2 add/g2-1.4 --update-kernel=/boot/new-kernel.img \ - --initrd=/boot/new-initrd --boot-filesystem=/boot/ - -- testing="GRUB2 add bls kernel+initrd" -- grub2BlsTest \ -- --blspair 6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf,6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf \ -- --blspair ,6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf \ -- --grub2 grub2.15 grub2.15 \ -- --add-kernel=/boot/new-kernel.img \ -- --title=title --initrd=/boot/new-initrd --boot-filesystem=/boot/ \ -- --copy-default -- - testing="GRUB2 display default index" - grub2DisplayTest grub2.1 defaultindex/0 --default-index - grub2DisplayTest grub2.2 defaultindex/0 --default-index -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf -deleted file mode 100644 -index 84b2bdf..0000000 ---- a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf -+++ /dev/null -@@ -1,8 +0,0 @@ --# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-3.8.0-2.fc19.x86_64.conf --title Fedora 19 (Rawhide) --version 3.8.0-2.fc19.x86_64 --machine-id 6a9857a393724b7a981ebb5b8495b9ea --filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 --linux /boot/vmlinux-3.8.0-2.fc19.x86_64 --options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 --initrd /boot/initrd-3.8.0-2.fc19.x86_64 -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf -deleted file mode 100644 -index e1c61a8..0000000 ---- a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf -+++ /dev/null -@@ -1,8 +0,0 @@ --# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-3.8.1-2.fc19.x86_64.conf --title Fedora 19 (Rawhide) --version 3.8.1-2.fc19.x86_64 --machine-id 6a9857a393724b7a981ebb5b8495b9ea --filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 --linux /boot/vmlinux-3.8.1-2.fc19.x86_64 --options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 --initrd /boot/initrd-3.8.1-2.fc19.x86_64 -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf -deleted file mode 100644 -index 4a60fbc..0000000 ---- a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf -+++ /dev/null -@@ -1,10 +0,0 @@ --# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.0-2.fc19.x86_64.conf --title Fedora 19 (tboot) (Rawhide) --version 3.8.0-2.fc19.x86_64 --machine-id 6a9857a393724b7a981ebb5b8495b9ea --filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 --multiboot /boot/tboot.gz -- options logging=serial,vga,memory --linux /boot/vmlinux-3.8.0-2.fc19.x86_64 --options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 --initrd /boot/initrd-3.8.0-2.fc19.x86_64 -diff --git a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf b/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf -deleted file mode 100644 -index 34c0e09..0000000 ---- a/test/grub2-support_files/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf -+++ /dev/null -@@ -1,10 +0,0 @@ --# /boot/org/freedesktop/bls/entries/6a9857a393724b7a981ebb5b8495b9ea-tboot-3.8.1-2.fc19.x86_64.conf --title Fedora 19 (tboot) (Rawhide) --version 3.8.1-2.fc19.x86_64 --machine-id 6a9857a393724b7a981ebb5b8495b9ea --filesystem 6d3376e4-fc93-4509-95ec-a21d68011da2 --multiboot /boot/tboot.gz -- options logging=serial,vga,memory --linux /boot/vmlinux-3.8.1-2.fc19.x86_64 --options root=UUID=6d3376e4-fc93-4509-95ec-a21d68011da2 --initrd /boot/initrd-3.8.1-2.fc19.x86_64 -diff --git a/test/grub2.15 b/test/grub2.15 -deleted file mode 100644 -index 0be2d74..0000000 ---- a/test/grub2.15 -+++ /dev/null -@@ -1,112 +0,0 @@ --# --# DO NOT EDIT THIS FILE --# --# It is automatically generated by grub2-mkconfig using templates --# from /etc/grub.d and settings from /etc/default/grub --# -- --### BEGIN /etc/grub.d/00_header ### --if [ -s $prefix/grubenv ]; then -- load_env --fi --if [ "${next_entry}" ] ; then -- set default="${next_entry}" -- set next_entry= -- save_env next_entry -- set boot_once=true --else -- set default="${saved_entry}" --fi -- --if [ x"${feature_menuentry_id}" = xy ]; then -- menuentry_id_option="--id" --else -- menuentry_id_option="" --fi -- --export menuentry_id_option -- --if [ "${prev_saved_entry}" ]; then -- set saved_entry="${prev_saved_entry}" -- save_env saved_entry -- set prev_saved_entry= -- save_env prev_saved_entry -- set boot_once=true --fi -- --function savedefault { -- if [ -z "${boot_once}" ]; then -- saved_entry="${chosen}" -- save_env saved_entry -- fi --} -- --function load_video { -- if [ x$feature_all_video_module = xy ]; then -- insmod all_video -- else -- insmod efi_gop -- insmod efi_uga -- insmod ieee1275_fb -- insmod vbe -- insmod vga -- insmod video_bochs -- insmod video_cirrus -- fi --} -- --if [ x$feature_default_font_path = xy ] ; then -- font=unicode --else --insmod part_gpt --insmod btrfs --set root='hd0,gpt4' --if [ x$feature_platform_search_hint = xy ]; then -- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 --else -- search --no-floppy --fs-uuid --set=root 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 --fi -- font="/root/usr/share/grub/unicode.pf2" --fi -- --if loadfont $font ; then -- set gfxmode=auto -- load_video -- insmod gfxterm -- set locale_dir=$prefix/locale -- set lang=en_US -- insmod gettext --fi --terminal_output gfxterm --set timeout=5 --### END /etc/grub.d/00_header ### -- --### BEGIN /etc/grub.d/10_blscfg ### -- --bls_import -- --### END /etc/grub.d/10_blscfg ### -- --### BEGIN /etc/grub.d/20_linux_xen ### -- --### END /etc/grub.d/20_linux_xen ### -- --### BEGIN /etc/grub.d/20_ppc_terminfo ### --### END /etc/grub.d/20_ppc_terminfo ### -- --### BEGIN /etc/grub.d/30_os-prober ### --### END /etc/grub.d/30_os-prober ### -- --### BEGIN /etc/grub.d/40_custom ### --# This file provides an easy way to add custom menu entries. Simply type the --# menu entries you want to add after this comment. Be careful not to change --# the 'exec tail' line above. --### END /etc/grub.d/40_custom ### -- --### BEGIN /etc/grub.d/41_custom ### --if [ -f ${config_directory}/custom.cfg ]; then -- source ${config_directory}/custom.cfg --elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then -- source $prefix/custom.cfg; --fi --### END /etc/grub.d/41_custom ### -diff --git a/test/results/grub2.15 b/test/results/grub2.15 -deleted file mode 100644 -index 0be2d74..0000000 ---- a/test/results/grub2.15 -+++ /dev/null -@@ -1,112 +0,0 @@ --# --# DO NOT EDIT THIS FILE --# --# It is automatically generated by grub2-mkconfig using templates --# from /etc/grub.d and settings from /etc/default/grub --# -- --### BEGIN /etc/grub.d/00_header ### --if [ -s $prefix/grubenv ]; then -- load_env --fi --if [ "${next_entry}" ] ; then -- set default="${next_entry}" -- set next_entry= -- save_env next_entry -- set boot_once=true --else -- set default="${saved_entry}" --fi -- --if [ x"${feature_menuentry_id}" = xy ]; then -- menuentry_id_option="--id" --else -- menuentry_id_option="" --fi -- --export menuentry_id_option -- --if [ "${prev_saved_entry}" ]; then -- set saved_entry="${prev_saved_entry}" -- save_env saved_entry -- set prev_saved_entry= -- save_env prev_saved_entry -- set boot_once=true --fi -- --function savedefault { -- if [ -z "${boot_once}" ]; then -- saved_entry="${chosen}" -- save_env saved_entry -- fi --} -- --function load_video { -- if [ x$feature_all_video_module = xy ]; then -- insmod all_video -- else -- insmod efi_gop -- insmod efi_uga -- insmod ieee1275_fb -- insmod vbe -- insmod vga -- insmod video_bochs -- insmod video_cirrus -- fi --} -- --if [ x$feature_default_font_path = xy ] ; then -- font=unicode --else --insmod part_gpt --insmod btrfs --set root='hd0,gpt4' --if [ x$feature_platform_search_hint = xy ]; then -- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 --else -- search --no-floppy --fs-uuid --set=root 5a2ca487-30f7-4fa5-96bd-abe38b68ceb3 --fi -- font="/root/usr/share/grub/unicode.pf2" --fi -- --if loadfont $font ; then -- set gfxmode=auto -- load_video -- insmod gfxterm -- set locale_dir=$prefix/locale -- set lang=en_US -- insmod gettext --fi --terminal_output gfxterm --set timeout=5 --### END /etc/grub.d/00_header ### -- --### BEGIN /etc/grub.d/10_blscfg ### -- --bls_import -- --### END /etc/grub.d/10_blscfg ### -- --### BEGIN /etc/grub.d/20_linux_xen ### -- --### END /etc/grub.d/20_linux_xen ### -- --### BEGIN /etc/grub.d/20_ppc_terminfo ### --### END /etc/grub.d/20_ppc_terminfo ### -- --### BEGIN /etc/grub.d/30_os-prober ### --### END /etc/grub.d/30_os-prober ### -- --### BEGIN /etc/grub.d/40_custom ### --# This file provides an easy way to add custom menu entries. Simply type the --# menu entries you want to add after this comment. Be careful not to change --# the 'exec tail' line above. --### END /etc/grub.d/40_custom ### -- --### BEGIN /etc/grub.d/41_custom ### --if [ -f ${config_directory}/custom.cfg ]; then -- source ${config_directory}/custom.cfg --elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then -- source $prefix/custom.cfg; --fi --### END /etc/grub.d/41_custom ### --- -1.9.3 - diff --git a/0007-Always-error-check-getLineByType.patch b/0007-Always-error-check-getLineByType.patch deleted file mode 100644 index 2ca4f7a..0000000 --- a/0007-Always-error-check-getLineByType.patch +++ /dev/null @@ -1,32 +0,0 @@ -From e3a293332591f44a190775a3b4dceefe2e5118a1 Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Thu, 25 Sep 2014 13:24:15 -0400 -Subject: [PATCH 07/10] Always error check getLineByType() - -Signed-off-by: Peter Jones ---- - grubby.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - -diff --git a/grubby.c b/grubby.c -index baf646b..b202b6e 100644 ---- a/grubby.c -+++ b/grubby.c -@@ -2369,9 +2369,11 @@ void displayEntry(struct singleEntry * entry, const char * prefix, int index) { - } else { - char * title; - line = getLineByType(LT_MENUENTRY, entry->lines); -- title = grub2ExtractTitle(line); -- if (title) -- printf("title=%s\n", title); -+ if (line) { -+ title = grub2ExtractTitle(line); -+ if (title) -+ printf("title=%s\n", title); -+ } - } - - for (j = 0, line = entry->lines; line; line = line->next) { --- -1.9.3 - diff --git a/0008-Add-devtree-support-to-extlinux-1088933.patch b/0008-Add-devtree-support-to-extlinux-1088933.patch deleted file mode 100644 index 1dd7ed3..0000000 --- a/0008-Add-devtree-support-to-extlinux-1088933.patch +++ /dev/null @@ -1,155 +0,0 @@ -From eb141563832f803abdfc1fde83fbfcc9031794b3 Mon Sep 17 00:00:00 2001 -From: Dennis Gilmore -Date: Fri, 10 Oct 2014 02:06:52 -0500 -Subject: [PATCH 08/10] Add --devtree support to extlinux (#1088933) - -On 32 bit arm it needs the path to the dtb. This adds support for the -fdt command to the extlinux handling. If --devtree /path/to/dtb/file.dtb -is passed grubby will add or updated it. ---- - grubby.c | 1 + - new-kernel-pkg | 20 ++++++++++++++++++-- - test.sh | 5 +++++ - test/extlinux.5 | 21 +++++++++++++++++++++ - test/results/add/extlinux5.1 | 21 +++++++++++++++++++++ - 5 files changed, 66 insertions(+), 2 deletions(-) - create mode 100644 test/extlinux.5 - create mode 100644 test/results/add/extlinux5.1 - -diff --git a/grubby.c b/grubby.c -index b202b6e..cbb1cca 100644 ---- a/grubby.c -+++ b/grubby.c -@@ -581,6 +581,7 @@ struct keywordTypes extlinuxKeywords[] = { - { "initrd", LT_INITRD, ' ', ',' }, - { "append", LT_KERNELARGS, ' ' }, - { "prompt", LT_UNKNOWN, ' ' }, -+ { "fdt", LT_DEVTREE, ' ' }, - { NULL, 0, 0 }, - }; - int useextlinuxmenu; -diff --git a/new-kernel-pkg b/new-kernel-pkg -index d9a9b67..0f21e39 100755 ---- a/new-kernel-pkg -+++ b/new-kernel-pkg -@@ -265,7 +265,7 @@ install() { - - $grubby --extlinux -c $extlinuxConfig \ - --add-kernel=$kernelImage \ -- $INITRD --copy-default $makedefault --title "$title" \ -+ $DEVTREE $INITRD --copy-default $makedefault --title "$title" \ - ${mbkernel:+--add-multiboot="$mbkernel"} ${mbargs:+--mbargs="$mbargs"} \ - --args="root=$rootdevice $kernargs" --remove-kernel="TITLE=$title" - else -@@ -411,6 +411,12 @@ update() { - fi - fi - -+ DEVTREE="" -+ if [ "x$devtreefile" != "x" -a -f "$devtreefile" ]; then -+ [ -n "$verbose" ] && echo "found $devtreefile and using it with grubby" -+ DEVTREE="--devtree $devtreefile" -+ fi -+ - if [ -n "$cfgGrub" ]; then - [ -n "$verbose" ] && echo "updating $version from $grubConfig" - $grubby --grub -c $grubConfig \ -@@ -499,7 +505,7 @@ update() { - [ -n "$verbose" ] && echo "updating $version from $extlinuxConfig" - $grubby --extlinux -c $extlinuxConfig \ - --update-kernel=$kernelImage \ -- $INITRD \ -+ $DEVTREE $INITRD \ - ${kernargs:+--args="$kernargs"} \ - ${removeargs:+--remove-args="$removeargs"} - else -@@ -724,6 +730,16 @@ if [ -z "$initrdfile" ]; then - fi - [ -n "$verbose" ] && echo "initrdfile is $initrdfile" - -+if [[ ${ARCH} =~ armv[5|7].*l ]]; then -+ if [ -d "$bootPrefix/dtb-$version/" ]; then -+ devtreedir="$bootPrefix/dtb-$version/" -+ if [ -n "$dtbfile" -a -f "$devtreedir/$dtbfile" ]; then -+ devtreefile="$devtreedir/$dtbfile" -+ fi -+ fi -+fi -+[ -n "$verbose" ] && echo "devtreedir is $devtreedir" -+ - # add dracut i18n, keyboard and plymouth kernel args if requested - if [ -n "$dracut" -o -n "$adddracutargs" ]; then - if [ -r /etc/vconsole.conf ]; then -diff --git a/test.sh b/test.sh -index 864a8ce..67b932d 100755 ---- a/test.sh -+++ b/test.sh -@@ -647,6 +647,11 @@ extlinuxTest extlinux.2 add/extlinux2.1 --add-kernel=/boot/vmlinuz-3.12.0-2.fc21 - --initrd=/boot/initrd-3.12.0-2.fc21.i686-new.img --boot-filesystem=/boot --copy-default \ - --title="Fedora (3.12.0-2.fc21.i686) 20 (Heisenbug)" \ - --remove-kernel="TITLE=Fedora (3.12.0-2.fc21.i686) 20 (Heisenbug)" -+extlinuxTest extlinux.5 add/extlinux5.1 --add-kernel=/boot/vmlinuz-3.15.0-0.rc1.git4.1.fc21.armv7hl \ -+ --devtree='/boot/dtb-3.15.0-0.rc1.git4.1.fc21.armv7hl/imx6q-cubox-i.dtb' \ -+ --initrd=/boot/initramfs-3.15.0-0.rc1.git4.1.fc21.armv7hl.img --boot-filesystem=/boot --copy-default \ -+ --title="Fedora (3.15.0-0.rc1.git4.1.fc21.armv7hl) 21 (Rawhide)" \ -+ --remove-kernel="TITLE=Fedora (3.12.0-0.fc21.armv7hl) 21 (Rawhide)" - - testing="LILO long titles" - liloTest lilo.1 longtitle/l1.1 --add-kernel=/boot/new-kernel.img \ -diff --git a/test/extlinux.5 b/test/extlinux.5 -new file mode 100644 -index 0000000..30e7572 ---- /dev/null -+++ b/test/extlinux.5 -@@ -0,0 +1,21 @@ -+ui menu.c32 -+ -+menu hidden -+timeout 50 -+totaltimeout 9000 -+ -+prompt 10 -+default Fedora (3.12.0-0.fc21.armv7hl) 21 (Rawhide) -+ -+label Fedora (3.15.0-0.rc1.git0.1.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.15.0-0.rc1.git0.1.fc21.armv7hl -+fdt /dtb-3.15.0-0.rc1.git0.1.fc21.armv7hl/imx6q-cubox-i.dtb -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.15.0-0.rc1.git0.1.fc21.armv7hl.img -+ -+label Fedora (3.12.0-0.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.12.0-0.fc21.armv7hl -+fdt /dtb-3.12.0-0.fc21.armv7hl/imx6q-cubox-i.dtb -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.12.0-0.fc21.armv7hl.img -+ -diff --git a/test/results/add/extlinux5.1 b/test/results/add/extlinux5.1 -new file mode 100644 -index 0000000..5e97883 ---- /dev/null -+++ b/test/results/add/extlinux5.1 -@@ -0,0 +1,21 @@ -+ui menu.c32 -+ -+menu hidden -+timeout 50 -+totaltimeout 9000 -+ -+prompt 10 -+default Fedora (3.15.0-0.rc1.git4.1.fc21.armv7hl) 21 (Rawhide) -+ -+label Fedora (3.15.0-0.rc1.git4.1.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.15.0-0.rc1.git4.1.fc21.armv7hl -+fdt /dtb-3.15.0-0.rc1.git4.1.fc21.armv7hl/imx6q-cubox-i.dtb -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.15.0-0.rc1.git4.1.fc21.armv7hl.img -+ -+label Fedora (3.15.0-0.rc1.git0.1.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.15.0-0.rc1.git0.1.fc21.armv7hl -+fdt /dtb-3.15.0-0.rc1.git0.1.fc21.armv7hl/imx6q-cubox-i.dtb -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.15.0-0.rc1.git0.1.fc21.armv7hl.img -+ --- -1.9.3 - diff --git a/0009-add-support-for-devicetree-directories-for-use-on-ar.patch b/0009-add-support-for-devicetree-directories-for-use-on-ar.patch deleted file mode 100644 index 0c64014..0000000 --- a/0009-add-support-for-devicetree-directories-for-use-on-ar.patch +++ /dev/null @@ -1,194 +0,0 @@ -From 69dbfdc99ce993d541984f7305bb1206858f4bcf Mon Sep 17 00:00:00 2001 -From: Dennis Gilmore -Date: Fri, 10 Oct 2014 01:38:27 -0500 -Subject: [PATCH 09/10] add support for devicetree directories for use on arm - ---- - grubby.c | 3 +++ - new-kernel-pkg | 31 ++++++++++++++++++++++++++----- - test.sh | 5 +++++ - test/extlinux.6 | 21 +++++++++++++++++++++ - test/results/add/extlinux6.1 | 21 +++++++++++++++++++++ - 5 files changed, 76 insertions(+), 5 deletions(-) - create mode 100644 test/extlinux.6 - create mode 100644 test/results/add/extlinux6.1 - -diff --git a/grubby.c b/grubby.c -index cbb1cca..a4a9811 100644 ---- a/grubby.c -+++ b/grubby.c -@@ -582,6 +582,7 @@ struct keywordTypes extlinuxKeywords[] = { - { "append", LT_KERNELARGS, ' ' }, - { "prompt", LT_UNKNOWN, ' ' }, - { "fdt", LT_DEVTREE, ' ' }, -+ { "fdtdir", LT_DEVTREE, ' ' }, - { NULL, 0, 0 }, - }; - int useextlinuxmenu; -@@ -4232,6 +4233,8 @@ int main(int argc, const char ** argv) { - _("display the title of the default kernel") }, - { "devtree", 0, POPT_ARG_STRING, &newDevTreePath, 0, - _("device tree file for new stanza"), _("dtb-path") }, -+ { "devtreedir", 0, POPT_ARG_STRING, &newDevTreePath, 0, -+ _("device tree directory for new stanza"), _("dtb-path") }, - { "elilo", 0, POPT_ARG_NONE, &configureELilo, 0, - _("configure elilo bootloader") }, - { "efi", 0, POPT_ARG_NONE, &isEfi, 0, -diff --git a/new-kernel-pkg b/new-kernel-pkg -index 0f21e39..31976a7 100755 ---- a/new-kernel-pkg -+++ b/new-kernel-pkg -@@ -128,7 +128,7 @@ usage() { - echo " [--banner=] [--multiboot=multiboot]" >&2 - echo " [--mbargs=mbargs] [--make-default] [--add-dracut-args]" >&2 - echo " [--add-plymouth-initrd]" >&2 -- echo " [--host-only] [--devtree=]" >&2 -+ echo " [--host-only] [--devtree=] [--devtreedir=]" >&2 - echo " <--install | --remove | --update | --rpmposttrans> " >&2 - echo " (ex: `basename $0` --mkinitrd --depmod --install 2.4.7-2)" >&2 - exit 1 -@@ -153,11 +153,17 @@ install() { - fi - - DEVTREE="" -- if [ "x$devtreefile" != "x" -a -f "$devtreefile" ]; then -+ if [ -n "$devtreefile" -a -f "$devtreefile" ]; then - [ -n "$verbose" ] && echo "found $devtreefile and using it with grubby" - DEVTREE="--devtree $devtreefile" - fi - -+ DEVTREEDIR="" -+ if [ -n "$devtreedir" -a -d "$devtreedir" ]; then -+ [ -n "$verbose" ] && echo "found $devtreedir and using it with grubby" -+ DEVTREEDIR="--devtreedir $devtreedir" -+ fi -+ - # FIXME: is this a good heuristic to find out if we're on iSeries? - if [ -d /proc/iSeries ]; then - [ -n "$verbose" ] && echo "On an iSeries, just making img file" -@@ -264,7 +270,7 @@ install() { - [ -n "$verbose" ] && echo "adding $version to $extlinuxConfig" - - $grubby --extlinux -c $extlinuxConfig \ -- --add-kernel=$kernelImage \ -+ --add-kernel=$kernelImage $DEVTREEDIR \ - $DEVTREE $INITRD --copy-default $makedefault --title "$title" \ - ${mbkernel:+--add-multiboot="$mbkernel"} ${mbargs:+--mbargs="$mbargs"} \ - --args="root=$rootdevice $kernargs" --remove-kernel="TITLE=$title" -@@ -412,11 +418,17 @@ update() { - fi - - DEVTREE="" -- if [ "x$devtreefile" != "x" -a -f "$devtreefile" ]; then -+ if [ -n "$devtreefile" -a -f "$devtreefile" ]; then - [ -n "$verbose" ] && echo "found $devtreefile and using it with grubby" - DEVTREE="--devtree $devtreefile" - fi - -+ DEVTREEDIR="" -+ if [ -n "$devtreedir" -a -d "$devtreedir" ]; then -+ [ -n "$verbose" ] && echo "found $devtreedir and using it with grubby" -+ DEVTREEDIR="--devtreedir $devtreedir" -+ fi -+ - if [ -n "$cfgGrub" ]; then - [ -n "$verbose" ] && echo "updating $version from $grubConfig" - $grubby --grub -c $grubConfig \ -@@ -505,7 +517,7 @@ update() { - [ -n "$verbose" ] && echo "updating $version from $extlinuxConfig" - $grubby --extlinux -c $extlinuxConfig \ - --update-kernel=$kernelImage \ -- $DEVTREE $INITRD \ -+ $DEVTREE $DEVTREEDIR $INITRD \ - ${kernargs:+--args="$kernargs"} \ - ${removeargs:+--remove-args="$removeargs"} - else -@@ -566,6 +578,15 @@ while [ $# -gt 0 ]; do - fi - ;; - -+ --devtreedir*) -+ if [[ $1 == --devtreedir\=* ]]; then -+ devtreedir=${1#--devtreedir=} -+ else -+ devtreedir=$2 -+ shift -+ fi -+ ;; -+ - --dracut) - dracut=--dracut - ;; -diff --git a/test.sh b/test.sh -index 67b932d..fe574c3 100755 ---- a/test.sh -+++ b/test.sh -@@ -652,6 +652,11 @@ extlinuxTest extlinux.5 add/extlinux5.1 --add-kernel=/boot/vmlinuz-3.15.0-0.rc1. - --initrd=/boot/initramfs-3.15.0-0.rc1.git4.1.fc21.armv7hl.img --boot-filesystem=/boot --copy-default \ - --title="Fedora (3.15.0-0.rc1.git4.1.fc21.armv7hl) 21 (Rawhide)" \ - --remove-kernel="TITLE=Fedora (3.12.0-0.fc21.armv7hl) 21 (Rawhide)" -+extlinuxTest extlinux.6 add/extlinux6.1 --add-kernel=/boot/vmlinuz-3.15.0-0.rc1.git4.1.fc21.armv7hl \ -+ --devtreedir='/boot/dtb-3.15.0-0.rc1.git4.1.fc21.armv7hl/' \ -+ --initrd=/boot/initramfs-3.15.0-0.rc1.git4.1.fc21.armv7hl.img --boot-filesystem=/boot --copy-default \ -+ --title="Fedora (3.15.0-0.rc1.git4.1.fc21.armv7hl) 21 (Rawhide)" \ -+ --remove-kernel="TITLE=Fedora (3.12.0-0.fc21.armv7hl) 21 (Rawhide)" - - testing="LILO long titles" - liloTest lilo.1 longtitle/l1.1 --add-kernel=/boot/new-kernel.img \ -diff --git a/test/extlinux.6 b/test/extlinux.6 -new file mode 100644 -index 0000000..c28a4a8 ---- /dev/null -+++ b/test/extlinux.6 -@@ -0,0 +1,21 @@ -+ui menu.c32 -+ -+menu hidden -+timeout 50 -+totaltimeout 9000 -+ -+prompt 10 -+default Fedora (3.12.0-0.fc21.armv7hl) 21 (Rawhide) -+ -+label Fedora (3.15.0-0.rc1.git0.1.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.15.0-0.rc1.git0.1.fc21.armv7hl -+fdtdir /dtb-3.15.0-0.rc1.git0.1.fc21.armv7hl/ -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.15.0-0.rc1.git0.1.fc21.armv7hl.img -+ -+label Fedora (3.12.0-0.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.12.0-0.fc21.armv7hl -+fdtdir /dtb-3.12.0-0.fc21.armv7hl/ -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.12.0-0.fc21.armv7hl.img -+ -diff --git a/test/results/add/extlinux6.1 b/test/results/add/extlinux6.1 -new file mode 100644 -index 0000000..ec2a2ea ---- /dev/null -+++ b/test/results/add/extlinux6.1 -@@ -0,0 +1,21 @@ -+ui menu.c32 -+ -+menu hidden -+timeout 50 -+totaltimeout 9000 -+ -+prompt 10 -+default Fedora (3.15.0-0.rc1.git4.1.fc21.armv7hl) 21 (Rawhide) -+ -+label Fedora (3.15.0-0.rc1.git4.1.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.15.0-0.rc1.git4.1.fc21.armv7hl -+fdtdir /dtb-3.15.0-0.rc1.git4.1.fc21.armv7hl/ -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.15.0-0.rc1.git4.1.fc21.armv7hl.img -+ -+label Fedora (3.15.0-0.rc1.git0.1.fc21.armv7hl) 21 (Rawhide) -+kernel /vmlinuz-3.15.0-0.rc1.git0.1.fc21.armv7hl -+fdtdir /dtb-3.15.0-0.rc1.git0.1.fc21.armv7hl/ -+append console=ttymxc0,115200 root=UUID=7ee85ed8-de4a-4779-8658-2daed0d35e97 ro rhgb quiet LANG=en_US.UTF-8 -+initrd /initramfs-3.15.0-0.rc1.git0.1.fc21.armv7hl.img -+ --- -1.9.3 - diff --git a/0010-cleanup-dtb-handling-to-work-in-the-supported-usecas.patch b/0010-cleanup-dtb-handling-to-work-in-the-supported-usecas.patch deleted file mode 100644 index 1dd031f..0000000 --- a/0010-cleanup-dtb-handling-to-work-in-the-supported-usecas.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 354c873f633db124d214da8a1258e32fe210c7cb Mon Sep 17 00:00:00 2001 -From: Dennis Gilmore -Date: Thu, 9 Oct 2014 01:42:03 -0500 -Subject: [PATCH 10/10] cleanup dtb handling to work in the supported usecases - -add SHIPSDTB variable in the uboot defaults file that needs to be set to yes for -platforms like the calxeda highbank that ship a dtb in u-boot that we want to use. -if the user defines a dtbfile in /etc/sysconfig/uboot update the extlinux.conf -with an fdt entry otherwise update a fdtdir entry unless SHIPSDTB is set to yes. ---- - new-kernel-pkg | 12 +++++++----- - uboot | 5 +++++ - 2 files changed, 12 insertions(+), 5 deletions(-) - -diff --git a/new-kernel-pkg b/new-kernel-pkg -index 31976a7..311deda 100755 ---- a/new-kernel-pkg -+++ b/new-kernel-pkg -@@ -752,14 +752,16 @@ fi - [ -n "$verbose" ] && echo "initrdfile is $initrdfile" - - if [[ ${ARCH} =~ armv[5|7].*l ]]; then -- if [ -d "$bootPrefix/dtb-$version/" ]; then -- devtreedir="$bootPrefix/dtb-$version/" -- if [ -n "$dtbfile" -a -f "$devtreedir/$dtbfile" ]; then -- devtreefile="$devtreedir/$dtbfile" -+ if [ -z "$SHIPSDTB" -o "$SHIPSDTB" != "yes" ]; then -+ if [ -n "$dtbfile" -a -f "$bootPrefix/dtb-$version/$dtbfile" ]; then -+ devtreefile="$bootPrefix/dtb-$version/$dtbfile" -+ [ -n "$verbose" ] && echo "devtreefile is $devtreefile" -+ elif [ -d "$bootPrefix/dtb-$version/" ]; then -+ devtreedir="$bootPrefix/dtb-$version/" -+ [ -n "$verbose" ] && echo "devtreedir is $devtreedir" - fi - fi - fi --[ -n "$verbose" ] && echo "devtreedir is $devtreedir" - - # add dracut i18n, keyboard and plymouth kernel args if requested - if [ -n "$dracut" -o -n "$adddracutargs" ]; then -diff --git a/uboot b/uboot -index aa663ad..07d8671 100644 ---- a/uboot -+++ b/uboot -@@ -36,3 +36,8 @@ - # default initrd uInitrd file name - #UBOOT_UINITRD=uInitrd - -+# defualt for platform shipping an onboard dtb. -+#SHIPSDTB=no -+ -+# option to tell new-kernel-pkg a specific dtb file to load in extlinux.conf -+#dtbfile=foo.dtb --- -1.9.3 - diff --git a/grubby.spec b/grubby.spec index 8841a29..3458f13 100644 --- a/grubby.spec +++ b/grubby.spec @@ -1,6 +1,6 @@ Name: grubby -Version: 8.35 -Release: 9%{?dist} +Version: 8.40 +Release: 1%{?dist} Summary: Command line tool for updating bootloader configs Group: System Environment/Base License: GPLv2+ @@ -9,17 +9,6 @@ URL: http://git.fedorahosted.org/git/grubby.git # git clone git://git.fedorahosted.org/git/grubby.git # git archive --format=tar --prefix=grubby-%{version}/ HEAD |bzip2 > grubby-%{version}.tar.bz2 Source0: %{name}-%{version}.tar.bz2 -Patch0001: 0001-Don-t-go-past-the-last-element-of-indexVars-in-findE.patch -Patch0002: 0002-Add-bls-test-harness-bits.patch -Patch0003: 0003-grubby-fix-initrd-updating-when-multiboot-exist.patch -Patch0004: 0004-Tell-a-slightly-better-fib-about-default-bootloader-.patch -Patch0005: 0005-Make-findTemplate-actually-return-the-saved-default.patch -Patch0006: 0006-Revert-Add-bls-test-harness-bits.patch -Patch0007: 0007-Always-error-check-getLineByType.patch -Patch0008: 0008-Add-devtree-support-to-extlinux-1088933.patch -Patch0009: 0009-add-support-for-devicetree-directories-for-use-on-ar.patch -Patch0010: 0010-cleanup-dtb-handling-to-work-in-the-supported-usecas.patch -Patch0011: 0001-Treat-kernel-and-kernel-core-as-identical-in-terms-o.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: pkgconfig glib2-devel popt-devel @@ -90,6 +79,10 @@ rm -rf $RPM_BUILD_ROOT %endif %changelog +* Wed Jun 10 2015 Peter Jones - 8.40-1 +- Update to 8.40-1 + Resolves: rhbz#1214950 + * Thu Nov 13 2014 Peter Jones - 8.35-9 - Disable "make check" on arm builds; right now the test suite is broken there and raises false positives constantly. diff --git a/sources b/sources index 1fcf7a1..e3b9613 100644 --- a/sources +++ b/sources @@ -1 +1 @@ -daf05585c3e1f3da2601cd1b0242fc60 grubby-8.35.tar.bz2 +bcad3c0dc804c4f526374616c1154469 grubby-8.40.tar.bz2