grub2/0096-ahci-Improve-error-handling.patch
Peter Jones 752ceb1640 Rebased to newer upstream for fedora-29
Signed-off-by: Peter Jones <pjones@redhat.com>
2018-07-10 15:12:02 -04:00

85 lines
3.3 KiB
Diff
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

From 566a03a623ca5ec07c815683625aecc410dc3095 Mon Sep 17 00:00:00 2001
From: Stefan Fritsch <fritsch@genua.de>
Date: Fri, 19 Jan 2018 14:13:29 +0100
Subject: [PATCH] ahci: Improve error handling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Check the error bits in the interrupt status register. According to the
AHCI 1.2 spec, "Interrupt sources that are disabled (0) are still
reflected in the status registers.", so this should work even though
grub uses polling
This fixes the following problem on a Fujitsu E744 laptop:
Sometimes there is a very long delay (up to several minutes) when
booting from hard disk. It seems accessing the DVD drive (which has no
disk inserted) sometimes fails with some errors, which leads to each
access being stalled until the 20s timeout triggers. This seems to
happen when grub is trying to read filesystem/partition data.
The problem is that the command_issue bit that is checked in the loop is
only reset if the "HBA receives a FIS which clears the BSY, DRQ, and ERR
bits for the command", but the ERR bit is never cleared. Therefore
command_issue is never reset and grub waits for the timeout.
The relevant bit in our case is the Task File Error Status (TFES), which
is equivalent to the ERR bit 0 in tfd. But this patch also checks
the other error bits except for the "Interface non-fatal error status"
bit.
Signed-off-by: Stefan Fritsch <fritsch@genua.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
---
grub-core/disk/ahci.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/grub-core/disk/ahci.c b/grub-core/disk/ahci.c
index 494a1b7734e..f2f606423ac 100644
--- a/grub-core/disk/ahci.c
+++ b/grub-core/disk/ahci.c
@@ -82,6 +82,20 @@ enum grub_ahci_hba_port_command
GRUB_AHCI_HBA_PORT_CMD_FR = 0x4000,
};
+enum grub_ahci_hba_port_int_status
+ {
+ GRUB_AHCI_HBA_PORT_IS_IFS = (1UL << 27),
+ GRUB_AHCI_HBA_PORT_IS_HBDS = (1UL << 28),
+ GRUB_AHCI_HBA_PORT_IS_HBFS = (1UL << 29),
+ GRUB_AHCI_HBA_PORT_IS_TFES = (1UL << 30),
+ };
+
+#define GRUB_AHCI_HBA_PORT_IS_FATAL_MASK ( \
+ GRUB_AHCI_HBA_PORT_IS_IFS | \
+ GRUB_AHCI_HBA_PORT_IS_HBDS | \
+ GRUB_AHCI_HBA_PORT_IS_HBFS | \
+ GRUB_AHCI_HBA_PORT_IS_TFES)
+
struct grub_ahci_hba
{
grub_uint32_t cap;
@@ -1026,7 +1040,8 @@ grub_ahci_readwrite_real (struct grub_ahci_device *dev,
endtime = grub_get_time_ms () + (spinup ? 20000 : 20000);
while ((dev->hba->ports[dev->port].command_issue & 1))
- if (grub_get_time_ms () > endtime)
+ if (grub_get_time_ms () > endtime ||
+ (dev->hba->ports[dev->port].intstatus & GRUB_AHCI_HBA_PORT_IS_FATAL_MASK))
{
grub_dprintf ("ahci", "AHCI status <%x %x %x %x>\n",
dev->hba->ports[dev->port].command_issue,
@@ -1034,7 +1049,10 @@ grub_ahci_readwrite_real (struct grub_ahci_device *dev,
dev->hba->ports[dev->port].intstatus,
dev->hba->ports[dev->port].task_file_data);
dev->hba->ports[dev->port].command_issue = 0;
- err = grub_error (GRUB_ERR_IO, "AHCI transfer timed out");
+ if (dev->hba->ports[dev->port].intstatus & GRUB_AHCI_HBA_PORT_IS_FATAL_MASK)
+ err = grub_error (GRUB_ERR_IO, "AHCI transfer error");
+ else
+ err = grub_error (GRUB_ERR_IO, "AHCI transfer timed out");
if (!reset)
grub_ahci_reset_port (dev, 1);
break;