rpms/glibc
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
315fcab4e8
glibc/glibc-upstream-2.34-181.patch
Carlos O'Donell 4e3257320c Sync with upstream branch release/2.34/master 
Upstream commit: 55640ed3fde48360a8e8083be4843bd2dc7cecfe

- i386: Regenerate ulps
- linux: Fix missing internal 64 bit time_t stat usage
- x86: Optimize L(less_vec) case in memcmp-evex-movbe.S
- x86: Don't set Prefer_No_AVX512 for processors with AVX512 and AVX-VNNI
- x86-64: Use notl in EVEX strcmp [BZ #28646]
- x86: Shrink memcmp-sse4.S code size
- x86: Double size of ERMS rep_movsb_threshold in dl-cacheinfo.h
- x86: Optimize memmove-vec-unaligned-erms.S
- x86-64: Replace movzx with movzbl
- x86-64: Remove Prefer_AVX2_STRCMP
- x86-64: Improve EVEX strcmp with masked load
- x86: Replace sse2 instructions with avx in memcmp-evex-movbe.S
- x86: Optimize memset-vec-unaligned-erms.S
- x86: Optimize memcmp-evex-movbe.S for frontend behavior and size
- x86: Modify ENTRY in sysdep.h so that p2align can be specified
- x86-64: Optimize load of all bits set into ZMM register [BZ #28252]
- scripts/glibcelf.py: Mark as UNSUPPORTED on Python 3.5 and earlier
- dlfcn: Do not use rtld_active () to determine ld.so state (bug 29078)
- INSTALL: Rephrase -with-default-link documentation
- misc: Fix rare fortify crash on wchar funcs. [BZ 29030]
- Default to --with-default-link=no (bug 25812)
- scripts: Add glibcelf.py module
2022-04-27 22:27:50 -04:00

844 lines
25 KiB
Diff
Raw Blame History

commit a7392db2ff2b9dd906500941ac6361dbe2211b0d
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Mon Nov 1 00:49:51 2021 -0500
x86: Optimize memmove-vec-unaligned-erms.S
No bug.
The optimizations are as follows:
1) Always align entry to 64 bytes. This makes behavior more
predictable and makes other frontend optimizations easier.
2) Make the L(more_8x_vec) cases 4k aliasing aware. This can have
significant benefits in the case that:
0 < (dst - src) < [256, 512]
3) Align before `rep movsb`. For ERMS this is roughly a [0, 30%]
improvement and for FSRM [-10%, 25%].
In addition to these primary changes there is general cleanup
throughout to optimize the aligning routines and control flow logic.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit a6b7502ec0c2da89a7437f43171f160d713e39c6)
diff --git a/sysdeps/x86_64/memmove.S b/sysdeps/x86_64/memmove.S
index db106a7a1f23f268..b2b318084823dceb 100644
--- a/sysdeps/x86_64/memmove.S
+++ b/sysdeps/x86_64/memmove.S
@@ -25,7 +25,7 @@
/* Use movups and movaps for smaller code sizes. */
#define VMOVU movups
#define VMOVA movaps
-
+#define MOV_SIZE 3
#define SECTION(p) p
#ifdef USE_MULTIARCH
diff --git a/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms-rtm.S b/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms-rtm.S
index 1ec1962e861dbf63..67a55f0c85af841c 100644
--- a/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms-rtm.S
+++ b/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms-rtm.S
@@ -4,7 +4,7 @@
# define VMOVNT vmovntdq
# define VMOVU vmovdqu
# define VMOVA vmovdqa
-
+# define MOV_SIZE 4
# define ZERO_UPPER_VEC_REGISTERS_RETURN \
ZERO_UPPER_VEC_REGISTERS_RETURN_XTEST
diff --git a/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
index e195e93f153c9512..975ae6c0515b83cb 100644
--- a/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
@@ -4,7 +4,7 @@
# define VMOVNT vmovntdq
# define VMOVU vmovdqu
# define VMOVA vmovdqa
-
+# define MOV_SIZE 4
# define SECTION(p) p##.avx
# define MEMMOVE_SYMBOL(p,s) p##_avx_##s
diff --git a/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
index 848848ab39ff9326..0fa7126830af7acb 100644
--- a/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
@@ -25,7 +25,7 @@
# define VMOVU vmovdqu64
# define VMOVA vmovdqa64
# define VZEROUPPER
-
+# define MOV_SIZE 6
# define SECTION(p) p##.evex512
# define MEMMOVE_SYMBOL(p,s) p##_avx512_##s
diff --git a/sysdeps/x86_64/multiarch/memmove-evex-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-evex-unaligned-erms.S
index 0cbce8f944da51a0..88715441feaaccf5 100644
--- a/sysdeps/x86_64/multiarch/memmove-evex-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-evex-unaligned-erms.S
@@ -25,7 +25,7 @@
# define VMOVU vmovdqu64
# define VMOVA vmovdqa64
# define VZEROUPPER
-
+# define MOV_SIZE 6
# define SECTION(p) p##.evex
# define MEMMOVE_SYMBOL(p,s) p##_evex_##s
diff --git a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
index abde8438d41f2320..7b27cbdda5fb99f7 100644
--- a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
@@ -76,6 +76,25 @@
# endif
#endif
+/* Whether to align before movsb. Ultimately we want 64 byte
+ align and not worth it to load 4x VEC for VEC_SIZE == 16. */
+#define ALIGN_MOVSB (VEC_SIZE > 16)
+/* Number of bytes to align movsb to. */
+#define MOVSB_ALIGN_TO 64
+
+#define SMALL_MOV_SIZE (MOV_SIZE <= 4)
+#define LARGE_MOV_SIZE (MOV_SIZE > 4)
+
+#if SMALL_MOV_SIZE + LARGE_MOV_SIZE != 1
+# error MOV_SIZE Unknown
+#endif
+
+#if LARGE_MOV_SIZE
+# define SMALL_SIZE_OFFSET (4)
+#else
+# define SMALL_SIZE_OFFSET (0)
+#endif
+
#ifndef PAGE_SIZE
# define PAGE_SIZE 4096
#endif
@@ -199,25 +218,21 @@ L(start):
# endif
cmp $VEC_SIZE, %RDX_LP
jb L(less_vec)
+ /* Load regardless. */
+ VMOVU (%rsi), %VEC(0)
cmp $(VEC_SIZE * 2), %RDX_LP
ja L(more_2x_vec)
-#if !defined USE_MULTIARCH || !IS_IN (libc)
-L(last_2x_vec):
-#endif
/* From VEC and to 2 * VEC. No branch when size == VEC_SIZE. */
- VMOVU (%rsi), %VEC(0)
VMOVU -VEC_SIZE(%rsi,%rdx), %VEC(1)
VMOVU %VEC(0), (%rdi)
VMOVU %VEC(1), -VEC_SIZE(%rdi,%rdx)
-#if !defined USE_MULTIARCH || !IS_IN (libc)
-L(nop):
- ret
+#if !(defined USE_MULTIARCH && IS_IN (libc))
+ ZERO_UPPER_VEC_REGISTERS_RETURN
#else
VZEROUPPER_RETURN
#endif
#if defined USE_MULTIARCH && IS_IN (libc)
END (MEMMOVE_SYMBOL (__memmove, unaligned))
-
# if VEC_SIZE == 16
ENTRY (__mempcpy_chk_erms)
cmp %RDX_LP, %RCX_LP
@@ -289,7 +304,7 @@ ENTRY (MEMMOVE_CHK_SYMBOL (__memmove_chk, unaligned_erms))
END (MEMMOVE_CHK_SYMBOL (__memmove_chk, unaligned_erms))
# endif
-ENTRY (MEMMOVE_SYMBOL (__memmove, unaligned_erms))
+ENTRY_P2ALIGN (MEMMOVE_SYMBOL (__memmove, unaligned_erms), 6)
movq %rdi, %rax
L(start_erms):
# ifdef __ILP32__
@@ -298,310 +313,448 @@ L(start_erms):
# endif
cmp $VEC_SIZE, %RDX_LP
jb L(less_vec)
+ /* Load regardless. */
+ VMOVU (%rsi), %VEC(0)
cmp $(VEC_SIZE * 2), %RDX_LP
ja L(movsb_more_2x_vec)
-L(last_2x_vec):
- /* From VEC and to 2 * VEC. No branch when size == VEC_SIZE. */
- VMOVU (%rsi), %VEC(0)
- VMOVU -VEC_SIZE(%rsi,%rdx), %VEC(1)
+ /* From VEC and to 2 * VEC. No branch when size == VEC_SIZE.
+ */
+ VMOVU -VEC_SIZE(%rsi, %rdx), %VEC(1)
VMOVU %VEC(0), (%rdi)
- VMOVU %VEC(1), -VEC_SIZE(%rdi,%rdx)
+ VMOVU %VEC(1), -VEC_SIZE(%rdi, %rdx)
L(return):
-#if VEC_SIZE > 16
+# if VEC_SIZE > 16
ZERO_UPPER_VEC_REGISTERS_RETURN
-#else
+# else
ret
+# endif
#endif
-L(movsb):
- cmp __x86_rep_movsb_stop_threshold(%rip), %RDX_LP
- jae L(more_8x_vec)
- cmpq %rsi, %rdi
- jb 1f
- /* Source == destination is less common. */
- je L(nop)
- leaq (%rsi,%rdx), %r9
- cmpq %r9, %rdi
- /* Avoid slow backward REP MOVSB. */
- jb L(more_8x_vec_backward)
-# if AVOID_SHORT_DISTANCE_REP_MOVSB
- testl $X86_STRING_CONTROL_AVOID_SHORT_DISTANCE_REP_MOVSB, __x86_string_control(%rip)
- jz 3f
- movq %rdi, %rcx
- subq %rsi, %rcx
- jmp 2f
-# endif
-1:
-# if AVOID_SHORT_DISTANCE_REP_MOVSB
- testl $X86_STRING_CONTROL_AVOID_SHORT_DISTANCE_REP_MOVSB, __x86_string_control(%rip)
- jz 3f
- movq %rsi, %rcx
- subq %rdi, %rcx
-2:
-/* Avoid "rep movsb" if RCX, the distance between source and destination,
- is N*4GB + [1..63] with N >= 0. */
- cmpl $63, %ecx
- jbe L(more_2x_vec) /* Avoid "rep movsb" if ECX <= 63. */
-3:
-# endif
- mov %RDX_LP, %RCX_LP
- rep movsb
-L(nop):
+#if LARGE_MOV_SIZE
+ /* If LARGE_MOV_SIZE this fits in the aligning bytes between the
+ ENTRY block and L(less_vec). */
+ .p2align 4,, 8
+L(between_4_7):
+ /* From 4 to 7. No branch when size == 4. */
+ movl (%rsi), %ecx
+ movl (%rsi, %rdx), %esi
+ movl %ecx, (%rdi)
+ movl %esi, (%rdi, %rdx)
ret
#endif
+ .p2align 4
L(less_vec):
/* Less than 1 VEC. */
#if VEC_SIZE != 16 && VEC_SIZE != 32 && VEC_SIZE != 64
# error Unsupported VEC_SIZE!
#endif
#if VEC_SIZE > 32
- cmpb $32, %dl
+ cmpl $32, %edx
jae L(between_32_63)
#endif
#if VEC_SIZE > 16
- cmpb $16, %dl
+ cmpl $16, %edx
jae L(between_16_31)
#endif
- cmpb $8, %dl
+ cmpl $8, %edx
jae L(between_8_15)
- cmpb $4, %dl
+#if SMALL_MOV_SIZE
+ cmpl $4, %edx
+#else
+ subq $4, %rdx
+#endif
jae L(between_4_7)
- cmpb $1, %dl
- ja L(between_2_3)
- jb 1f
- movzbl (%rsi), %ecx
+ cmpl $(1 - SMALL_SIZE_OFFSET), %edx
+ jl L(copy_0)
+ movb (%rsi), %cl
+ je L(copy_1)
+ movzwl (-2 + SMALL_SIZE_OFFSET)(%rsi, %rdx), %esi
+ movw %si, (-2 + SMALL_SIZE_OFFSET)(%rdi, %rdx)
+L(copy_1):
movb %cl, (%rdi)
-1:
+L(copy_0):
ret
+
+#if SMALL_MOV_SIZE
+ .p2align 4,, 8
+L(between_4_7):
+ /* From 4 to 7. No branch when size == 4. */
+ movl -4(%rsi, %rdx), %ecx
+ movl (%rsi), %esi
+ movl %ecx, -4(%rdi, %rdx)
+ movl %esi, (%rdi)
+ ret
+#endif
+
+#if VEC_SIZE > 16
+ /* From 16 to 31. No branch when size == 16. */
+ .p2align 4,, 8
+L(between_16_31):
+ vmovdqu (%rsi), %xmm0
+ vmovdqu -16(%rsi, %rdx), %xmm1
+ vmovdqu %xmm0, (%rdi)
+ vmovdqu %xmm1, -16(%rdi, %rdx)
+ /* No ymm registers have been touched. */
+ ret
+#endif
+
#if VEC_SIZE > 32
+ .p2align 4,, 10
L(between_32_63):
/* From 32 to 63. No branch when size == 32. */
VMOVU (%rsi), %YMM0
- VMOVU -32(%rsi,%rdx), %YMM1
+ VMOVU -32(%rsi, %rdx), %YMM1
VMOVU %YMM0, (%rdi)
- VMOVU %YMM1, -32(%rdi,%rdx)
- VZEROUPPER_RETURN
-#endif
-#if VEC_SIZE > 16
- /* From 16 to 31. No branch when size == 16. */
-L(between_16_31):
- VMOVU (%rsi), %XMM0
- VMOVU -16(%rsi,%rdx), %XMM1
- VMOVU %XMM0, (%rdi)
- VMOVU %XMM1, -16(%rdi,%rdx)
+ VMOVU %YMM1, -32(%rdi, %rdx)
VZEROUPPER_RETURN
#endif
+
+ .p2align 4,, 10
L(between_8_15):
/* From 8 to 15. No branch when size == 8. */
- movq -8(%rsi,%rdx), %rcx
+ movq -8(%rsi, %rdx), %rcx
movq (%rsi), %rsi
- movq %rcx, -8(%rdi,%rdx)
movq %rsi, (%rdi)
+ movq %rcx, -8(%rdi, %rdx)
ret
-L(between_4_7):
- /* From 4 to 7. No branch when size == 4. */
- movl -4(%rsi,%rdx), %ecx
- movl (%rsi), %esi
- movl %ecx, -4(%rdi,%rdx)
- movl %esi, (%rdi)
- ret
-L(between_2_3):
- /* From 2 to 3. No branch when size == 2. */
- movzwl -2(%rsi,%rdx), %ecx
- movzwl (%rsi), %esi
- movw %cx, -2(%rdi,%rdx)
- movw %si, (%rdi)
- ret
+ .p2align 4,, 10
+L(last_4x_vec):
+ /* Copy from 2 * VEC + 1 to 4 * VEC, inclusively. */
+
+ /* VEC(0) and VEC(1) have already been loaded. */
+ VMOVU -VEC_SIZE(%rsi, %rdx), %VEC(2)
+ VMOVU -(VEC_SIZE * 2)(%rsi, %rdx), %VEC(3)
+ VMOVU %VEC(0), (%rdi)
+ VMOVU %VEC(1), VEC_SIZE(%rdi)
+ VMOVU %VEC(2), -VEC_SIZE(%rdi, %rdx)
+ VMOVU %VEC(3), -(VEC_SIZE * 2)(%rdi, %rdx)
+ VZEROUPPER_RETURN
+
+ .p2align 4
#if defined USE_MULTIARCH && IS_IN (libc)
L(movsb_more_2x_vec):
cmp __x86_rep_movsb_threshold(%rip), %RDX_LP
ja L(movsb)
#endif
L(more_2x_vec):
- /* More than 2 * VEC and there may be overlap between destination
- and source. */
+ /* More than 2 * VEC and there may be overlap between
+ destination and source. */
cmpq $(VEC_SIZE * 8), %rdx
ja L(more_8x_vec)
+ /* Load VEC(1) regardless. VEC(0) has already been loaded. */
+ VMOVU VEC_SIZE(%rsi), %VEC(1)
cmpq $(VEC_SIZE * 4), %rdx
jbe L(last_4x_vec)
- /* Copy from 4 * VEC + 1 to 8 * VEC, inclusively. */
- VMOVU (%rsi), %VEC(0)
- VMOVU VEC_SIZE(%rsi), %VEC(1)
+ /* Copy from 4 * VEC + 1 to 8 * VEC, inclusively. */
VMOVU (VEC_SIZE * 2)(%rsi), %VEC(2)
VMOVU (VEC_SIZE * 3)(%rsi), %VEC(3)
- VMOVU -VEC_SIZE(%rsi,%rdx), %VEC(4)
- VMOVU -(VEC_SIZE * 2)(%rsi,%rdx), %VEC(5)
- VMOVU -(VEC_SIZE * 3)(%rsi,%rdx), %VEC(6)
- VMOVU -(VEC_SIZE * 4)(%rsi,%rdx), %VEC(7)
+ VMOVU -VEC_SIZE(%rsi, %rdx), %VEC(4)
+ VMOVU -(VEC_SIZE * 2)(%rsi, %rdx), %VEC(5)
+ VMOVU -(VEC_SIZE * 3)(%rsi, %rdx), %VEC(6)
+ VMOVU -(VEC_SIZE * 4)(%rsi, %rdx), %VEC(7)
VMOVU %VEC(0), (%rdi)
VMOVU %VEC(1), VEC_SIZE(%rdi)
VMOVU %VEC(2), (VEC_SIZE * 2)(%rdi)
VMOVU %VEC(3), (VEC_SIZE * 3)(%rdi)
- VMOVU %VEC(4), -VEC_SIZE(%rdi,%rdx)
- VMOVU %VEC(5), -(VEC_SIZE * 2)(%rdi,%rdx)
- VMOVU %VEC(6), -(VEC_SIZE * 3)(%rdi,%rdx)
- VMOVU %VEC(7), -(VEC_SIZE * 4)(%rdi,%rdx)
- VZEROUPPER_RETURN
-L(last_4x_vec):
- /* Copy from 2 * VEC + 1 to 4 * VEC, inclusively. */
- VMOVU (%rsi), %VEC(0)
- VMOVU VEC_SIZE(%rsi), %VEC(1)
- VMOVU -VEC_SIZE(%rsi,%rdx), %VEC(2)
- VMOVU -(VEC_SIZE * 2)(%rsi,%rdx), %VEC(3)
- VMOVU %VEC(0), (%rdi)
- VMOVU %VEC(1), VEC_SIZE(%rdi)
- VMOVU %VEC(2), -VEC_SIZE(%rdi,%rdx)
- VMOVU %VEC(3), -(VEC_SIZE * 2)(%rdi,%rdx)
+ VMOVU %VEC(4), -VEC_SIZE(%rdi, %rdx)
+ VMOVU %VEC(5), -(VEC_SIZE * 2)(%rdi, %rdx)
+ VMOVU %VEC(6), -(VEC_SIZE * 3)(%rdi, %rdx)
+ VMOVU %VEC(7), -(VEC_SIZE * 4)(%rdi, %rdx)
VZEROUPPER_RETURN
+ .p2align 4,, 4
L(more_8x_vec):
+ movq %rdi, %rcx
+ subq %rsi, %rcx
+ /* Go to backwards temporal copy if overlap no matter what as
+ backward REP MOVSB is slow and we don't want to use NT stores if
+ there is overlap. */
+ cmpq %rdx, %rcx
+ /* L(more_8x_vec_backward_check_nop) checks for src == dst. */
+ jb L(more_8x_vec_backward_check_nop)
/* Check if non-temporal move candidate. */
#if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN (libc)
/* Check non-temporal store threshold. */
- cmp __x86_shared_non_temporal_threshold(%rip), %RDX_LP
+ cmp __x86_shared_non_temporal_threshold(%rip), %RDX_LP
ja L(large_memcpy_2x)
#endif
- /* Entry if rdx is greater than non-temporal threshold but there
- is overlap. */
+ /* To reach this point there cannot be overlap and dst > src. So
+ check for overlap and src > dst in which case correctness
+ requires forward copy. Otherwise decide between backward/forward
+ copy depending on address aliasing. */
+
+ /* Entry if rdx is greater than __x86_rep_movsb_stop_threshold
+ but less than __x86_shared_non_temporal_threshold. */
L(more_8x_vec_check):
- cmpq %rsi, %rdi
- ja L(more_8x_vec_backward)
- /* Source == destination is less common. */
- je L(nop)
- /* Load the first VEC and last 4 * VEC to support overlapping
- addresses. */
- VMOVU (%rsi), %VEC(4)
+ /* rcx contains dst - src. Add back length (rdx). */
+ leaq (%rcx, %rdx), %r8
+ /* If r8 has different sign than rcx then there is overlap so we
+ must do forward copy. */
+ xorq %rcx, %r8
+ /* Isolate just sign bit of r8. */
+ shrq $63, %r8
+ /* Get 4k difference dst - src. */
+ andl $(PAGE_SIZE - 256), %ecx
+ /* If r8 is non-zero must do foward for correctness. Otherwise
+ if ecx is non-zero there is 4k False Alaising so do backward
+ copy. */
+ addl %r8d, %ecx
+ jz L(more_8x_vec_backward)
+
+ /* if rdx is greater than __x86_shared_non_temporal_threshold
+ but there is overlap, or from short distance movsb. */
+L(more_8x_vec_forward):
+ /* Load first and last 4 * VEC to support overlapping addresses.
+ */
+
+ /* First vec was already loaded into VEC(0). */
VMOVU -VEC_SIZE(%rsi, %rdx), %VEC(5)
VMOVU -(VEC_SIZE * 2)(%rsi, %rdx), %VEC(6)
+ /* Save begining of dst. */
+ movq %rdi, %rcx
+ /* Align dst to VEC_SIZE - 1. */
+ orq $(VEC_SIZE - 1), %rdi
VMOVU -(VEC_SIZE * 3)(%rsi, %rdx), %VEC(7)
VMOVU -(VEC_SIZE * 4)(%rsi, %rdx), %VEC(8)
- /* Save start and stop of the destination buffer. */
- movq %rdi, %r11
- leaq -VEC_SIZE(%rdi, %rdx), %rcx
- /* Align destination for aligned stores in the loop. Compute
- how much destination is misaligned. */
- movq %rdi, %r8
- andq $(VEC_SIZE - 1), %r8
- /* Get the negative of offset for alignment. */
- subq $VEC_SIZE, %r8
- /* Adjust source. */
- subq %r8, %rsi
- /* Adjust destination which should be aligned now. */
- subq %r8, %rdi
- /* Adjust length. */
- addq %r8, %rdx
- .p2align 4
+ /* Subtract dst from src. Add back after dst aligned. */
+ subq %rcx, %rsi
+ /* Finish aligning dst. */
+ incq %rdi
+ /* Restore src adjusted with new value for aligned dst. */
+ addq %rdi, %rsi
+ /* Store end of buffer minus tail in rdx. */
+ leaq (VEC_SIZE * -4)(%rcx, %rdx), %rdx
+
+ /* Dont use multi-byte nop to align. */
+ .p2align 4,, 11
L(loop_4x_vec_forward):
/* Copy 4 * VEC a time forward. */
- VMOVU (%rsi), %VEC(0)
- VMOVU VEC_SIZE(%rsi), %VEC(1)
- VMOVU (VEC_SIZE * 2)(%rsi), %VEC(2)
- VMOVU (VEC_SIZE * 3)(%rsi), %VEC(3)
+ VMOVU (%rsi), %VEC(1)
+ VMOVU VEC_SIZE(%rsi), %VEC(2)
+ VMOVU (VEC_SIZE * 2)(%rsi), %VEC(3)
+ VMOVU (VEC_SIZE * 3)(%rsi), %VEC(4)
subq $-(VEC_SIZE * 4), %rsi
- addq $-(VEC_SIZE * 4), %rdx
- VMOVA %VEC(0), (%rdi)
- VMOVA %VEC(1), VEC_SIZE(%rdi)
- VMOVA %VEC(2), (VEC_SIZE * 2)(%rdi)
- VMOVA %VEC(3), (VEC_SIZE * 3)(%rdi)
+ VMOVA %VEC(1), (%rdi)
+ VMOVA %VEC(2), VEC_SIZE(%rdi)
+ VMOVA %VEC(3), (VEC_SIZE * 2)(%rdi)
+ VMOVA %VEC(4), (VEC_SIZE * 3)(%rdi)
subq $-(VEC_SIZE * 4), %rdi
- cmpq $(VEC_SIZE * 4), %rdx
+ cmpq %rdi, %rdx
ja L(loop_4x_vec_forward)
/* Store the last 4 * VEC. */
- VMOVU %VEC(5), (%rcx)
- VMOVU %VEC(6), -VEC_SIZE(%rcx)
- VMOVU %VEC(7), -(VEC_SIZE * 2)(%rcx)
- VMOVU %VEC(8), -(VEC_SIZE * 3)(%rcx)
+ VMOVU %VEC(5), (VEC_SIZE * 3)(%rdx)
+ VMOVU %VEC(6), (VEC_SIZE * 2)(%rdx)
+ VMOVU %VEC(7), VEC_SIZE(%rdx)
+ VMOVU %VEC(8), (%rdx)
/* Store the first VEC. */
- VMOVU %VEC(4), (%r11)
+ VMOVU %VEC(0), (%rcx)
+ /* Keep L(nop_backward) target close to jmp for 2-byte encoding.
+ */
+L(nop_backward):
VZEROUPPER_RETURN
+ .p2align 4,, 8
+L(more_8x_vec_backward_check_nop):
+ /* rcx contains dst - src. Test for dst == src to skip all of
+ memmove. */
+ testq %rcx, %rcx
+ jz L(nop_backward)
L(more_8x_vec_backward):
/* Load the first 4 * VEC and last VEC to support overlapping
addresses. */
- VMOVU (%rsi), %VEC(4)
+
+ /* First vec was also loaded into VEC(0). */
VMOVU VEC_SIZE(%rsi), %VEC(5)
VMOVU (VEC_SIZE * 2)(%rsi), %VEC(6)
+ /* Begining of region for 4x backward copy stored in rcx. */
+ leaq (VEC_SIZE * -4 + -1)(%rdi, %rdx), %rcx
VMOVU (VEC_SIZE * 3)(%rsi), %VEC(7)
- VMOVU -VEC_SIZE(%rsi,%rdx), %VEC(8)
- /* Save stop of the destination buffer. */
- leaq -VEC_SIZE(%rdi, %rdx), %r11
- /* Align destination end for aligned stores in the loop. Compute
- how much destination end is misaligned. */
- leaq -VEC_SIZE(%rsi, %rdx), %rcx
- movq %r11, %r9
- movq %r11, %r8
- andq $(VEC_SIZE - 1), %r8
- /* Adjust source. */
- subq %r8, %rcx
- /* Adjust the end of destination which should be aligned now. */
- subq %r8, %r9
- /* Adjust length. */
- subq %r8, %rdx
-
- .p2align 4
+ VMOVU -VEC_SIZE(%rsi, %rdx), %VEC(8)
+ /* Subtract dst from src. Add back after dst aligned. */
+ subq %rdi, %rsi
+ /* Align dst. */
+ andq $-(VEC_SIZE), %rcx
+ /* Restore src. */
+ addq %rcx, %rsi
+
+ /* Don't use multi-byte nop to align. */
+ .p2align 4,, 11
L(loop_4x_vec_backward):
/* Copy 4 * VEC a time backward. */
- VMOVU (%rcx), %VEC(0)
- VMOVU -VEC_SIZE(%rcx), %VEC(1)
- VMOVU -(VEC_SIZE * 2)(%rcx), %VEC(2)
- VMOVU -(VEC_SIZE * 3)(%rcx), %VEC(3)
- addq $-(VEC_SIZE * 4), %rcx
- addq $-(VEC_SIZE * 4), %rdx
- VMOVA %VEC(0), (%r9)
- VMOVA %VEC(1), -VEC_SIZE(%r9)
- VMOVA %VEC(2), -(VEC_SIZE * 2)(%r9)
- VMOVA %VEC(3), -(VEC_SIZE * 3)(%r9)
- addq $-(VEC_SIZE * 4), %r9
- cmpq $(VEC_SIZE * 4), %rdx
- ja L(loop_4x_vec_backward)
+ VMOVU (VEC_SIZE * 3)(%rsi), %VEC(1)
+ VMOVU (VEC_SIZE * 2)(%rsi), %VEC(2)
+ VMOVU (VEC_SIZE * 1)(%rsi), %VEC(3)
+ VMOVU (VEC_SIZE * 0)(%rsi), %VEC(4)
+ addq $(VEC_SIZE * -4), %rsi
+ VMOVA %VEC(1), (VEC_SIZE * 3)(%rcx)
+ VMOVA %VEC(2), (VEC_SIZE * 2)(%rcx)
+ VMOVA %VEC(3), (VEC_SIZE * 1)(%rcx)
+ VMOVA %VEC(4), (VEC_SIZE * 0)(%rcx)
+ addq $(VEC_SIZE * -4), %rcx
+ cmpq %rcx, %rdi
+ jb L(loop_4x_vec_backward)
/* Store the first 4 * VEC. */
- VMOVU %VEC(4), (%rdi)
+ VMOVU %VEC(0), (%rdi)
VMOVU %VEC(5), VEC_SIZE(%rdi)
VMOVU %VEC(6), (VEC_SIZE * 2)(%rdi)
VMOVU %VEC(7), (VEC_SIZE * 3)(%rdi)
/* Store the last VEC. */
- VMOVU %VEC(8), (%r11)
+ VMOVU %VEC(8), -VEC_SIZE(%rdx, %rdi)
+ VZEROUPPER_RETURN
+
+#if defined USE_MULTIARCH && IS_IN (libc)
+ /* L(skip_short_movsb_check) is only used with ERMS. Not for
+ FSRM. */
+ .p2align 5,, 16
+# if ALIGN_MOVSB
+L(skip_short_movsb_check):
+# if MOVSB_ALIGN_TO > VEC_SIZE
+ VMOVU VEC_SIZE(%rsi), %VEC(1)
+# endif
+# if MOVSB_ALIGN_TO > (VEC_SIZE * 2)
+# error Unsupported MOVSB_ALIGN_TO
+# endif
+ /* If CPU does not have FSRM two options for aligning. Align src
+ if dst and src 4k alias. Otherwise align dst. */
+ testl $(PAGE_SIZE - 512), %ecx
+ jnz L(movsb_align_dst)
+ /* Fall through. dst and src 4k alias. It's better to align src
+ here because the bottleneck will be loads dues to the false
+ dependency on dst. */
+
+ /* rcx already has dst - src. */
+ movq %rcx, %r9
+ /* Add src to len. Subtract back after src aligned. -1 because
+ src is initially aligned to MOVSB_ALIGN_TO - 1. */
+ leaq -1(%rsi, %rdx), %rcx
+ /* Inclusively align src to MOVSB_ALIGN_TO - 1. */
+ orq $(MOVSB_ALIGN_TO - 1), %rsi
+ /* Restore dst and len adjusted with new values for aligned dst.
+ */
+ leaq 1(%rsi, %r9), %rdi
+ subq %rsi, %rcx
+ /* Finish aligning src. */
+ incq %rsi
+
+ rep movsb
+
+ VMOVU %VEC(0), (%r8)
+# if MOVSB_ALIGN_TO > VEC_SIZE
+ VMOVU %VEC(1), VEC_SIZE(%r8)
+# endif
VZEROUPPER_RETURN
+# endif
+
+ .p2align 4,, 12
+L(movsb):
+ movq %rdi, %rcx
+ subq %rsi, %rcx
+ /* Go to backwards temporal copy if overlap no matter what as
+ backward REP MOVSB is slow and we don't want to use NT stores if
+ there is overlap. */
+ cmpq %rdx, %rcx
+ /* L(more_8x_vec_backward_check_nop) checks for src == dst. */
+ jb L(more_8x_vec_backward_check_nop)
+# if ALIGN_MOVSB
+ /* Save dest for storing aligning VECs later. */
+ movq %rdi, %r8
+# endif
+ /* If above __x86_rep_movsb_stop_threshold most likely is
+ candidate for NT moves aswell. */
+ cmp __x86_rep_movsb_stop_threshold(%rip), %RDX_LP
+ jae L(large_memcpy_2x_check)
+# if AVOID_SHORT_DISTANCE_REP_MOVSB || ALIGN_MOVSB
+ /* Only avoid short movsb if CPU has FSRM. */
+ testl $X86_STRING_CONTROL_AVOID_SHORT_DISTANCE_REP_MOVSB, __x86_string_control(%rip)
+ jz L(skip_short_movsb_check)
+# if AVOID_SHORT_DISTANCE_REP_MOVSB
+ /* Avoid "rep movsb" if RCX, the distance between source and
+ destination, is N*4GB + [1..63] with N >= 0. */
+
+ /* ecx contains dst - src. Early check for backward copy
+ conditions means only case of slow movsb with src = dst + [0,
+ 63] is ecx in [-63, 0]. Use unsigned comparison with -64 check
+ for that case. */
+ cmpl $-64, %ecx
+ ja L(more_8x_vec_forward)
+# endif
+# endif
+# if ALIGN_MOVSB
+# if MOVSB_ALIGN_TO > VEC_SIZE
+ VMOVU VEC_SIZE(%rsi), %VEC(1)
+# endif
+# if MOVSB_ALIGN_TO > (VEC_SIZE * 2)
+# error Unsupported MOVSB_ALIGN_TO
+# endif
+ /* Fall through means cpu has FSRM. In that case exclusively
+ align destination. */
+L(movsb_align_dst):
+ /* Subtract dst from src. Add back after dst aligned. */
+ subq %rdi, %rsi
+ /* Exclusively align dst to MOVSB_ALIGN_TO (64). */
+ addq $(MOVSB_ALIGN_TO - 1), %rdi
+ /* Add dst to len. Subtract back after dst aligned. */
+ leaq (%r8, %rdx), %rcx
+ /* Finish aligning dst. */
+ andq $-(MOVSB_ALIGN_TO), %rdi
+ /* Restore src and len adjusted with new values for aligned dst.
+ */
+ addq %rdi, %rsi
+ subq %rdi, %rcx
+
+ rep movsb
+
+ /* Store VECs loaded for aligning. */
+ VMOVU %VEC(0), (%r8)
+# if MOVSB_ALIGN_TO > VEC_SIZE
+ VMOVU %VEC(1), VEC_SIZE(%r8)
+# endif
+ VZEROUPPER_RETURN
+# else /* !ALIGN_MOVSB. */
+L(skip_short_movsb_check):
+ mov %RDX_LP, %RCX_LP
+ rep movsb
+ ret
+# endif
+#endif
+ .p2align 4,, 10
#if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN (libc)
- .p2align 4
+L(large_memcpy_2x_check):
+ cmp __x86_rep_movsb_threshold(%rip), %RDX_LP
+ jb L(more_8x_vec_check)
L(large_memcpy_2x):
- /* Compute absolute value of difference between source and
- destination. */
- movq %rdi, %r9
- subq %rsi, %r9
- movq %r9, %r8
- leaq -1(%r9), %rcx
- sarq $63, %r8
- xorq %r8, %r9
- subq %r8, %r9
- /* Don't use non-temporal store if there is overlap between
- destination and source since destination may be in cache when
- source is loaded. */
- cmpq %r9, %rdx
- ja L(more_8x_vec_check)
+ /* To reach this point it is impossible for dst > src and
+ overlap. Remaining to check is src > dst and overlap. rcx
+ already contains dst - src. Negate rcx to get src - dst. If
+ length > rcx then there is overlap and forward copy is best. */
+ negq %rcx
+ cmpq %rcx, %rdx
+ ja L(more_8x_vec_forward)
/* Cache align destination. First store the first 64 bytes then
adjust alignments. */
- VMOVU (%rsi), %VEC(8)
-#if VEC_SIZE < 64
- VMOVU VEC_SIZE(%rsi), %VEC(9)
-#if VEC_SIZE < 32
- VMOVU (VEC_SIZE * 2)(%rsi), %VEC(10)
- VMOVU (VEC_SIZE * 3)(%rsi), %VEC(11)
-#endif
-#endif
- VMOVU %VEC(8), (%rdi)
-#if VEC_SIZE < 64
- VMOVU %VEC(9), VEC_SIZE(%rdi)
-#if VEC_SIZE < 32
- VMOVU %VEC(10), (VEC_SIZE * 2)(%rdi)
- VMOVU %VEC(11), (VEC_SIZE * 3)(%rdi)
-#endif
-#endif
+
+ /* First vec was also loaded into VEC(0). */
+# if VEC_SIZE < 64
+ VMOVU VEC_SIZE(%rsi), %VEC(1)
+# if VEC_SIZE < 32
+ VMOVU (VEC_SIZE * 2)(%rsi), %VEC(2)
+ VMOVU (VEC_SIZE * 3)(%rsi), %VEC(3)
+# endif
+# endif
+ VMOVU %VEC(0), (%rdi)
+# if VEC_SIZE < 64
+ VMOVU %VEC(1), VEC_SIZE(%rdi)
+# if VEC_SIZE < 32
+ VMOVU %VEC(2), (VEC_SIZE * 2)(%rdi)
+ VMOVU %VEC(3), (VEC_SIZE * 3)(%rdi)
+# endif
+# endif
+
/* Adjust source, destination, and size. */
movq %rdi, %r8
andq $63, %r8
@@ -614,9 +767,13 @@ L(large_memcpy_2x):
/* Adjust length. */
addq %r8, %rdx
- /* Test if source and destination addresses will alias. If they do
- the larger pipeline in large_memcpy_4x alleviated the
+ /* Test if source and destination addresses will alias. If they
+ do the larger pipeline in large_memcpy_4x alleviated the
performance drop. */
+
+ /* ecx contains -(dst - src). not ecx will return dst - src - 1
+ which works for testing aliasing. */
+ notl %ecx
testl $(PAGE_SIZE - VEC_SIZE * 8), %ecx
jz L(large_memcpy_4x)
@@ -704,8 +861,8 @@ L(loop_large_memcpy_4x_outer):
/* ecx stores inner loop counter. */
movl $(PAGE_SIZE / LARGE_LOAD_SIZE), %ecx
L(loop_large_memcpy_4x_inner):
- /* Only one prefetch set per page as doing 4 pages give more time
- for prefetcher to keep up. */
+ /* Only one prefetch set per page as doing 4 pages give more
+ time for prefetcher to keep up. */
PREFETCH_ONE_SET(1, (%rsi), PREFETCHED_LOAD_SIZE)
PREFETCH_ONE_SET(1, (%rsi), PAGE_SIZE + PREFETCHED_LOAD_SIZE)
PREFETCH_ONE_SET(1, (%rsi), PAGE_SIZE * 2 + PREFETCHED_LOAD_SIZE)
Reference in New Issue View Git Blame Copy Permalink