%define glibcsrcdir glibc-2.23-40-gde51ff8 %define glibcversion 2.23.90 %define glibcrelease 4%{?dist} # Pre-release tarballs are pulled in from git using a command that is # effectively: # # git archive HEAD --format=tar --prefix=$(git describe --match 'glibc-*')/ \ # > $(git describe --match 'glibc-*').tar # gzip -9 $(git describe --match 'glibc-*').tar # # glibc_release_url is only defined when we have a release tarball. # % define glibc_release_url http://ftp.gnu.org/gnu/glibc/ ############################################################################## # We support hte following options: # --with/--without, # * testsuite - Running the testsuite. # * benchtests - Running and building benchmark subpackage. # * bootstrap - Bootstrapping the package. # * werror - Build with -Werror # * docs - Build with documentation and the required dependencies. # * valgrind - Run smoke tests with valgrind to verify dynamic loader. # # You must always run the testsuite for production builds. # Default: Always run the testsuite. %bcond_without testsuite # Default: Always build the benchtests. %bcond_without benchtests # Default: Not bootstrapping. %bcond_with bootstrap # Default: Enable using -Werror %bcond_without werror # Default: Always build documentation. %bcond_without docs # Default: Always run valgrind tests %bcond_without valgrind # Run a valgrind smoke test to ensure that the release is compatible and # doesn't any new feature that might cause valgrind to abort. %if %{with valgrind} %ifarch s390 ppc64 ppc64p7 # There is no valgrind support for 31-bit s390. # The valgrind test does not work on ppc64, ppc64p7 (bug 1273103). %undefine with_valgrind %endif %endif %if %{with werror} %ifarch s390 s390x # The s390 and s390x builds are not -Werror clean yet. For s390, the # latest problem may be due to questionable code in test-string.h # (upstream bug 19261, rhbz#1283184). %undefine with_werror %endif %endif %if %{with bootstrap} # Disable benchtests, -Werror, docs, and valgrind if we're bootstrapping %undefine with_benchtests %undefine with_werror %undefine with_docs %undefine with_valgrind %endif ############################################################################## # Auxiliary arches are those arches that can be built in addition # to the core supported arches. You either install an auxarch or # you install the base arch, not both. You would do this in order # to provide a more optimized version of the package for your arch. %define auxarches athlon alphaev6 ############################################################################## # Enable lock elision support for these architectures # # At the moment lock elision is disabled on x86_64 until there's a CPU that # would actually benefit from enabling it. Intel released a microcode update # to disable HLE and RTM at boot and the Fedora kernel now applies it early # enough that keeping lock elision enabled should be harmless, but we have # disabled it anyway as a conservative measure. %define lock_elision_arches s390 s390x ############################################################################## # We build a special package for Xen that includes TLS support with # no negative segment offsets for use with Xen guests. This is # purely an optimization for increased performance on those arches. %define xenarches i686 athlon %ifarch %{xenarches} %define buildxen 1 %define xenpackage 0 %else %define buildxen 0 %define xenpackage 0 %endif ############################################################################## # We support only 64-bit POWER with the following runtimes: # 64-bit BE: # - Power 620 / 970 ISA (default runtime, compatile with POWER4 and newer) # - Provided for the large number of PowerPC G5 users. # - IFUNC support provides optimized core routines for POWER6, # POWER7, and POWER8 transparently (if not using specific runtimes # below) # - POWER6 (has power6x symlink to power6, enabled via AT_PLATFORM) # - Legacy for old systems. Should be deprecated at some point soon. # - POWER7 (enabled via AT_PLATFORM) # - Existing deployments. # - POWER8 (enabled via AT_PLATFORM) # - Latest generation. # 64-bit LE: # - POWER8 LE (default) # - Latest generation. # # No 32-bit POWER support is provided. # # There are currently no plans for POWER9 enablement, but as hardware and # upstream support become available this will be reviewed. # %ifarch ppc64 # Build the additional runtimes for 64-bit BE POWER. %define buildpower6 1 %define buildpower7 1 %define buildpower8 1 %else # No additional runtimes for ppc64le or ppc64p7, just the default. %define buildpower6 0 %define buildpower7 0 %define buildpower8 0 %endif ############################################################################## # Any architecture/kernel combination that supports running 32-bit and 64-bit # code in userspace is considered a biarch arch. %define biarcharches %{ix86} x86_64 %{power64} s390 s390x ############################################################################## # If the debug information is split into two packages, the core debuginfo # pacakge and the common debuginfo package then the arch should be listed # here. If the arch is not listed here then a single core debuginfo package # will be created for the architecture. %define debuginfocommonarches %{biarcharches} alpha alphaev6 ############################################################################## # If the architecture has multiarch support in glibc then it should be listed # here to enable support in the build. Multiarch support is a single library # with implementations of certain functions for multiple architectures. The # most optimal function is selected at runtime based on the hardware that is # detected by glibc. The underlying support for function selection and # execution is provided by STT_GNU_IFUNC. %define multiarcharches %{power64} %{ix86} x86_64 %{sparc} ############################################################################## # Add -s for a less verbose build output. %define silentrules PARALLELMFLAGS= ############################################################################## # %%package glibc - The GNU C Library (glibc) core package. ############################################################################## Summary: The GNU libc libraries Name: glibc Version: %{glibcversion} Release: %{glibcrelease} # GPLv2+ is used in a bunch of programs, LGPLv2+ is used for libraries. # Things that are linked directly into dynamically linked programs # and shared libraries (e.g. crt files, lib*_nonshared.a) have an additional # exception which allows linking it into any kind of programs or shared # libraries without restrictions. License: LGPLv2+ and LGPLv2+ with exceptions and GPLv2+ Group: System Environment/Libraries URL: http://www.gnu.org/software/glibc/ Source0: %{?glibc_release_url}%{glibcsrcdir}.tar.gz Source1: build-locale-archive.c Source2: glibc_post_upgrade.c Source3: libc-lock.h Source4: nscd.conf Source7: nsswitch.conf Source8: power6emul.c Source9: bench.mk Source10: glibc-bench-compare Source11: SUPPORTED ############################################################################## # Start of glibc patches ############################################################################## # 0000-0999 for patches which are unlikely to ever go upstream or which # have not been analyzed to see if they ought to go upstream yet. # # 1000-2000 for patches that are already upstream. # # 2000-3000 for patches that are awaiting upstream approval # # Yes, I realize this means some gratutious changes as patches to from # one bucket to another, but I find this scheme makes it easier to track # the upstream divergence and patches needing approval. # # Note that we can still apply the patches in any order we see fit, so # the changes from one bucket to another won't necessarily result in needing # to twiddle the patch because of dependencies on prior patches and the like. ############################################################################## # # Patches that are unlikely to go upstream or not yet analyzed. # ############################################################################## # Configuration twiddle, not sure there's a good case to get upstream to # change this. Patch0001: glibc-fedora-nscd.patch Patch0003: glibc-fedora-ldd.patch Patch0004: glibc-fedora-ppc-unwind.patch # Build info files in the source tree, then move to the build # tree so that they're identical for multilib builds Patch0005: glibc-rh825061.patch # Horrible hack, never to be upstreamed. Can go away once the world # has been rebuilt to use the new ld.so path. Patch0006: glibc-arm-hardfloat-3.patch # Needs to be sent upstream Patch0009: glibc-fedora-include-bits-ldbl.patch # All these were from the glibc-fedora.patch mega-patch and need another # round of reviewing. Ideally they'll either be submitted upstream or # dropped. Patch0012: glibc-fedora-linux-tcsetattr.patch Patch0014: glibc-fedora-nptl-linklibc.patch Patch0015: glibc-fedora-localedef.patch Patch0016: glibc-fedora-i386-tls-direct-seg-refs.patch Patch0019: glibc-fedora-nis-rh188246.patch Patch0020: glibc-fedora-manual-dircategory.patch Patch0024: glibc-fedora-locarchive.patch Patch0025: glibc-fedora-streams-rh436349.patch Patch0028: glibc-fedora-localedata-rh61908.patch Patch0030: glibc-fedora-uname-getrlimit.patch Patch0031: glibc-fedora-__libc_multiple_libcs.patch Patch0033: glibc-fedora-elf-ORIGIN.patch # Needs to be sent upstream. # Support mangling and demangling null pointers. Patch0037: glibc-rh952799.patch # ARM: Accept that some objects marked hard ABI are now not because of a # binutils bug. Patch0044: glibc-rh1009145.patch # Allow applications to call pthread_atfork without libpthread.so. Patch0046: glibc-rh1013801.patch Patch0047: glibc-nscd-sysconfig.patch # Disable rwlock elision if --enable-lock-elision is not used. Patch0052: glibc-disable-rwlock-elision.patch # confstr _CS_PATH should only return /usr/bin on Fedora since /bin is just a # symlink to it. Patch0053: glibc-cs-path.patch # Fix -Warray-bounds warning for GCC5, likely PR/59124 or PR/66422. # See Fedora bug #1263817. Patch0054: glibc-res-hconf-gcc5.patch Patch0055: glibc-ld-ctype-gcc5.patch Patch0056: glibc-gethnamaddr-gcc5.patch Patch0057: glibc-dns-host-gcc5.patch Patch0058: glibc-bug-regex-gcc5.patch # Add C.UTF-8 locale into /usr/lib/locale/ Patch0059: glibc-c-utf8-locale.patch ############################################################################## # # Patches from upstream # ############################################################################## ############################################################################## # # Patches submitted, but not yet approved upstream. # ############################################################################## # # Each should be associated with a BZ. # Obviously we're not there right now, but that's the goal # # http://sourceware.org/ml/libc-alpha/2012-12/msg00103.html Patch2007: glibc-rh697421.patch Patch2013: glibc-rh741105.patch # Upstream BZ 14247 Patch2023: glibc-rh827510.patch # Upstream BZ 14185 Patch2027: glibc-rh819430.patch Patch2031: glibc-rh1070416.patch Patch2033: glibc-aarch64-tls-fixes.patch Patch2034: glibc-aarch64-workaround-nzcv-clobber-in-tlsdesc.patch # Group Merge Patch: Patch2035: glibc-nsswitch-Add-group-merging-support.patch Patch2036: glibc-gcc-PR69537.patch # extend_alloca removal, BZ 18023 Patch2037: glibc-rh1315108.patch # Upstream BZ 19573, patch reverts problematic commit Patch2099: glibc-rh1252570.patch ############################################################################## # # Benchmark comparison patches. # ############################################################################## Patch3002: glibc-bench-build.patch ############################################################################## # End of glibc patches. ############################################################################## ############################################################################## # Continued list of core "glibc" package information: ############################################################################## Buildroot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) Obsoletes: glibc-profile < 2.4 Obsoletes: nss_db Provides: ldconfig # The dynamic linker supports DT_GNU_HASH Provides: rtld(GNU_HASH) # This is a short term need until everything is rebuilt in the ARM world # to use the new dynamic linker path %ifarch armv7hl armv7hnl Provides: ld-linux.so.3 Provides: ld-linux.so.3(GLIBC_2.4) %endif Requires: glibc-common = %{version}-%{release} # Require libgcc in case some program calls pthread_cancel in its %%post Requires(pre): basesystem, libgcc # This is for building auxiliary programs like memusage, nscd # For initial glibc bootstraps it can be commented out BuildRequires: gd-devel libpng-devel zlib-devel %if %{with docs} # Removing texinfo will cause check-safety.sh test to fail because it seems to # trigger documentation generation based on dependencies. We need to fix this # upstream in some way that doesn't depend on generating docs to validate the # texinfo. I expect it's simply the wrong dependency for that target. BuildRequires: texinfo %endif %if %{without bootstrap} BuildRequires: libselinux-devel >= 1.33.4-3 BuildRequires: nss-devel %endif BuildRequires: audit-libs-devel >= 1.1.3, sed >= 3.95, libcap-devel, gettext # We need procps-ng (/bin/ps), util-linux (/bin/kill), and gawk (/bin/awk), # but it is more flexible to require the actual programs and let rpm infer # the packages. However, until bug 1259054 is widely fixed we avoid the # following: # BuildRequires: /bin/ps, /bin/kill, /bin/awk # And use instead (which should be reverted some time in the future): BuildRequires: procps-ng, util-linux, gawk BuildRequires: systemtap-sdt-devel %if %{with valgrind} # Require valgrind for smoke testing the dynamic loader to make sure we # have not broken valgrind. BuildRequires: /usr/bin/valgrind %endif # We use systemd rpm macros for nscd BuildRequires: systemd # We use python for the microbenchmarks BuildRequires: python # This is to ensure that __frame_state_for is exported by glibc # will be compatible with egcs 1.x.y BuildRequires: gcc >= 3.2 %define enablekernel 2.6.32 Conflicts: kernel < %{enablekernel} %define target %{_target_cpu}-redhat-linux %ifarch %{arm} %define target %{_target_cpu}-redhat-linuxeabi %endif %ifarch %{power64} %ifarch ppc64le %define target ppc64le-redhat-linux %else %define target ppc64-redhat-linux %endif %endif %ifarch %{multiarcharches} # Need STT_IFUNC support %ifarch %{power64} BuildRequires: binutils >= 2.20.51.0.2 Conflicts: binutils < 2.20.51.0.2 %else %ifarch s390 s390x # Needed for STT_GNU_IFUNC support for s390/390x BuildRequires: binutils >= 2.23.52.0.1-8 Conflicts: binutils < 2.23.52.0.1-8 %else # Default to this version BuildRequires: binutils >= 2.19.51.0.10 Conflicts: binutils < 2.19.51.0.10 %endif %endif # Earlier releases have broken support for IRELATIVE relocations Conflicts: prelink < 0.4.2 %else # Need AS_NEEDED directive # Need --hash-style=* support BuildRequires: binutils >= 2.17.50.0.2-5 %endif BuildRequires: gcc >= 3.2.1-5 %ifarch s390 s390x BuildRequires: gcc >= 4.1.0-0.17 %endif %if 0%{?_enable_debug_packages} BuildRequires: elfutils >= 0.72 BuildRequires: rpm >= 4.2-0.56 %endif %if %{without boostrap} %if %{with testsuite} # The testsuite builds static C++ binaries that require a C++ compiler, # static C++ runtime from libstdc++-static, and lastly static glibc. BuildRequires: gcc-c++ BuildRequires: libstdc++-static # A configure check tests for the ability to create static C++ binaries # before glibc is built and therefore we need a glibc-static for that # check to pass even if we aren't going to use any of those objects to # build the tests. BuildRequires: glibc-static %endif %endif # Filter out all GLIBC_PRIVATE symbols since they are internal to # the package and should not be examined by any other tool. %global __filter_GLIBC_PRIVATE 1 # For language packs we have glibc require a virtual dependency # "glibc-langpack" wich gives us at least one installed langpack. # If no langpack providing 'glibc-langpack' was installed you'd # get all of them, and that would make the transition from a # system without langpacks smoother (you'd get all the locales # installed). You would then trim that list, and the trimmed list # is preserved. One problem is you can't have "no" locales installed, # in that case we offer a "glibc-minimal-langpack" sub-pakcage for # this purpose. Requires: glibc-langpack = %{version}-%{release} Suggests: glibc-all-langpacks = %{version}-%{release} %description The glibc package contains standard libraries which are used by multiple programs on the system. In order to save disk space and memory, as well as to make upgrading easier, common system code is kept in one place and shared between programs. This particular package contains the most important sets of shared libraries: the standard C library and the standard math library. Without these two libraries, a Linux system will not function. ############################################################################## # glibc "xen" sub-package ############################################################################## %if %{xenpackage} %package xen Summary: The GNU libc libraries (optimized for running under Xen) Group: System Environment/Libraries Requires: glibc = %{version}-%{release}, glibc-utils = %{version}-%{release} %description xen The standard glibc package is optimized for native kernels and does not perform as well under the Xen hypervisor. This package provides alternative library binaries that will be selected instead when running under Xen. Install glibc-xen if you might run your system under the Xen hypervisor. %endif ############################################################################## # glibc "devel" sub-package ############################################################################## %package devel Summary: Object files for development using standard C libraries. Group: Development/Libraries Requires(pre): /sbin/install-info Requires(pre): %{name}-headers Requires: %{name}-headers = %{version}-%{release} Requires: %{name} = %{version}-%{release} %description devel The glibc-devel package contains the object files necessary for developing programs which use the standard C libraries (which are used by nearly all programs). If you are developing programs which will use the standard C libraries, your system needs to have these standard object files available in order to create the executables. Install glibc-devel if you are going to develop programs which will use the standard C libraries. ############################################################################## # glibc "static" sub-package ############################################################################## %package static Summary: C library static libraries for -static linking. Group: Development/Libraries Requires: %{name}-devel = %{version}-%{release} %description static The glibc-static package contains the C library static libraries for -static linking. You don't need these, unless you link statically, which is highly discouraged. ############################################################################## # glibc "headers" sub-package # - The headers package includes all common headers that are shared amongst # the multilib builds. It was created to reduce the download size, and # thus avoid downloading one header package per multilib. The package is # identical both in content and file list, any difference is an error. # Files like gnu/stubs.h which have gnu/stubs-32.h (i686) and gnu/stubs-64.h # are included in glibc-headers, but the -32 and -64 files are in their # respective i686 and x86_64 devel packages. ############################################################################## %package headers Summary: Header files for development using standard C libraries. Group: Development/Libraries Provides: %{name}-headers(%{_target_cpu}) %ifarch x86_64 # If both -m32 and -m64 is to be supported on AMD64, x86_64 glibc-headers # have to be installed, not i586 ones. Obsoletes: %{name}-headers(i586) Obsoletes: %{name}-headers(i686) %endif Requires(pre): kernel-headers Requires: kernel-headers >= 2.2.1, %{name} = %{version}-%{release} BuildRequires: kernel-headers >= 2.6.22 %description headers The glibc-headers package contains the header files necessary for developing programs which use the standard C libraries (which are used by nearly all programs). If you are developing programs which will use the standard C libraries, your system needs to have these standard header files available in order to create the executables. Install glibc-headers if you are going to develop programs which will use the standard C libraries. ############################################################################## # glibc "common" sub-package ############################################################################## %package common Summary: Common binaries and locale data for glibc Requires: %{name} = %{version}-%{release} Requires: tzdata >= 2003a Group: System Environment/Base %description common The glibc-common package includes common binaries for the GNU libc libraries, as well as national language (locale) support. %package locale-source Summary: The sources for the locales Requires: %{name} = %{version}-%{release} Requires: %{name}-common = %{version}-%{release} Group: System Environment/Base %description locale-source The sources for all locales provided in the language packs. If you are building custom locales you will most likely use these sources as the basis for your new locale. %define lang_package()\ %package langpack-%{1}\ Summary: Locale data for %{1}\ Provides: glibc-langpack = %{version}-%{release}\ Requires: %{name} = %{version}-%{release}\ Requires: %{name}-common = %{version}-%{release}\ %define supplements_list %(cat %{SOURCE11} | grep ^%{1}_ | cut -d / -f 1 | cut -d @ -f 1 | cut -d . -f 1 | sort -u | tr "\\\\n" " " | sed 's/ $//' | sed 's/ / or langpacks-/g' | sed 's/^/ or langpacks-/')\ Supplements: (glibc = %{version}-%{release} and (langpacks-%{1}%{supplements_list}))\ Group: System Environment/Base\ %description langpack-%{1}\ The glibc-langpack-%{1} package includes the basic information required\ to support the %{1} language in your applications.\ %ifnarch %{auxarches}\ %files -f langpack-%{1}.filelist langpack-%{1}\ %defattr(-,root,root)\ %endif\ %{nil} # language_list will contain a list of all supported language # names in iso-639 format, i.e. something like "aa af ... yue zh zu" # We add "eo" (Esperanto) manually because currently glibc has no # Esperanto locale in SUPPORTED but translations for Esperanto exist. # Therefore, we want a glibc-langpack-eo sub-package containing these # translations. %define language_list eo %(cat %{SOURCE11} | grep -E '^[a-z]+_' | cut -d _ -f 1 | sort -u | tr "\\\\n" " " | sed 's/ $//') %define create_lang_packages()\ %{lua:\ local languages = rpm.expand("%1")\ string.gsub(languages, "(%a+)",\ function(i) print(rpm.expand("%lang_package "..i.."")) end)}\ %{nil} %create_lang_packages %language_list %define require_langpacks()\ %{lua:\ local languages = rpm.expand("%1")\ string.gsub(languages, "(%a+)",\ function(i) print(rpm.expand("Requires: %{name}-langpack-"..i.." = %{version}-%{release}\\n")) end)}\ %{nil} # The glibc-all-langpacks provides the virtual glibc-langpack, # and thus satisfies glibc's requirement for installed locales. # Users can add one more other langauge packs and then eventually # uninstall all-langpacks to save space. %package all-langpacks Summary: All language packs for %{name}. Group: System Environment/Base Requires: %{name} = %{version}-%{release} Requires: %{name}-common = %{version}-%{release} Provides: %{name}-langpack = %{version}-%{release} %description all-langpacks # No %files, this is an empty pacakge. The C/POSIX and # C.UTF-8 files are already installed by glibc. We create # minimal-langpack because the virtual provide of # glibc-langpack needs at least one package installed # to satisfy it. Given that no-locales installed is a valid # use case we support it here with this package. %package minimal-langpack Summary: Minimal language packs for %{name}. Group: System Environment/Base Provides: glibc-langpack = %{version}-%{release} Requires: %{name} = %{version}-%{release} Requires: %{name}-common = %{version}-%{release} %description minimal-langpack This is a Meta package that is used to install minimal language packs. This package ensures you can use C, POSIX, or C.UTF-8 locales, but nothing else. It is designed for assembling a minimal system. %ifnarch %{auxarches} %files minimal-langpack %endif ############################################################################## # glibc "nscd" sub-package ############################################################################## %package -n nscd Summary: A Name Service Caching Daemon (nscd). Group: System Environment/Daemons Requires: %{name} = %{version}-%{release} %if %{with bootstrap} Requires: libselinux >= 1.17.10-1 %endif Requires: audit-libs >= 1.1.3 Requires(pre): /usr/sbin/useradd, coreutils Requires(post): systemd Requires(preun): systemd Requires(postun): systemd, /usr/sbin/userdel %description -n nscd Nscd caches name service lookups and can dramatically improve performance with NIS+, and may help with DNS as well. ############################################################################## # glibc "utils" sub-package ############################################################################## %package utils Summary: Development utilities from GNU C library Group: Development/Tools Requires: %{name} = %{version}-%{release} %description utils The glibc-utils package contains memusage, a memory usage profiler, mtrace, a memory leak tracer and xtrace, a function call tracer which can be helpful during program debugging. If unsure if you need this, don't install this package. ############################################################################## # glibc core "debuginfo" sub-package ############################################################################## %if 0%{?_enable_debug_packages} %define debug_package %{nil} %define __debug_install_post %{nil} %global __debug_package 1 %package debuginfo Summary: Debug information for package %{name} Group: Development/Debug AutoReqProv: no %ifarch %{debuginfocommonarches} Requires: glibc-debuginfo-common = %{version}-%{release} %else %ifarch %{ix86} %{sparc} Obsoletes: glibc-debuginfo-common %endif %endif %description debuginfo This package provides debug information for package %{name}. Debug information is useful when developing applications that use this package or when debugging this package. This package also contains static standard C libraries with debugging information. You need this only if you want to step into C library routines during debugging programs statically linked against one or more of the standard C libraries. To use this debugging information, you need to link binaries with -static -L%{_prefix}/lib/debug%{_libdir} compiler options. ############################################################################## # glibc common "debuginfo-common" sub-package ############################################################################## %ifarch %{debuginfocommonarches} %package debuginfo-common Summary: Debug information for package %{name} Group: Development/Debug AutoReqProv: no %description debuginfo-common This package provides debug information for package %{name}. Debug information is useful when developing applications that use this package or when debugging this package. %endif # %{debuginfocommonarches} %endif # 0%{?_enable_debug_packages} %if %{with benchtests} %package benchtests Summary: Benchmarking binaries and scripts for %{name} Group: Development/Debug %description benchtests This package provides built benchmark binaries and scripts to run microbenchmark tests on the system. %endif ############################################################################## # Prepare for the build. ############################################################################## %prep # Log system information uname -a cat /proc/cpuinfo cat /proc/meminfo %setup -q -n %{glibcsrcdir} # Patch order matters. %patch0001 -p1 %patch0003 -p1 %patch0004 -p1 %patch0005 -p1 %patch0006 -p1 %patch2007 -p1 %patch0009 -p1 %patch0012 -p1 %patch2013 -p1 %patch0014 -p1 %patch0015 -p1 %patch0016 -p1 %patch0019 -p1 %patch0020 -p1 %patch2023 -p1 %patch0024 -p1 %patch0025 -p1 %patch2027 -p1 %patch0028 -p1 %patch0030 -p1 %patch0031 -p1 %patch0033 -p1 %patch0037 -p1 %patch0044 -p1 %patch0046 -p1 %patch2031 -p1 %patch0047 -p1 %patch2033 -p1 %patch2034 -p1 %patch0052 -p1 %patch0053 -p1 %patch3002 -p1 %patch0054 -p1 %patch0055 -p1 %patch0056 -p1 %patch0057 -p1 %patch0058 -p1 %patch0059 -p1 %patch2035 -p1 %patch2036 -p1 %patch2037 -p1 %patch2099 -p1 ############################################################################## # %%prep - Additional prep required... ############################################################################## # Make benchmark scripts executable chmod +x benchtests/scripts/*.py scripts/pylint # Remove all files generated from patching. find . -type f -size 0 -o -name "*.orig" -exec rm -f {} \; # Ensure timestamps on configure files are current to prevent # regenerating them. touch `find . -name configure` # Ensure *-kw.h files are current to prevent regenerating them. touch locale/programs/*-kw.h # Verify that the supported set of locales matches the lang packs. # Generally you'll be updating the source tarball which will bring # in new langpacks we might have to build. Verify the differences # then update the copy of SUPPORTED. We do it this way to avoid # accidentally creating new langpacks. cmp %{SOURCE11} localedata/SUPPORTED ############################################################################## # Build glibc... ############################################################################## %build # We build using the native system compilers. GCC=gcc GXX=g++ ############################################################################## # %%build - x86 options. ############################################################################## # On x86 we build for the specific target cpu rpm is using. %ifarch %{ix86} BuildFlags="-march=%{_target_cpu} -mtune=generic" %endif # We don't support building for i386. The generic i386 architecture lacks the # atomic primitives required for NPTL support. However, when a user asks to # build for i386 we interpret that as "for whatever works on x86" and we # select i686. Thus we treat i386 as an alias for i686. %ifarch i386 i686 BuildFlags="-march=i686 -mtune=generic" %endif %ifarch i486 i586 BuildFlags="$BuildFlags -mno-tls-direct-seg-refs" %endif %ifarch x86_64 BuildFlags="-mtune=generic" %endif ############################################################################## # %%build - SPARC options. ############################################################################## %ifarch sparc BuildFlags="-fcall-used-g6" GCC="$GCC -m32" GXX="$GXX -m32" %endif %ifarch sparcv9 BuildFlags="-mcpu=ultrasparc -fcall-used-g6" GCC="$GCC -m32" GXX="$GXX -m32" %endif %ifarch sparcv9v BuildFlags="-mcpu=niagara -fcall-used-g6" GCC="$GCC -m32" GXX="$GXX -m32" %endif %ifarch sparc64 BuildFlags="-mcpu=ultrasparc -mvis -fcall-used-g6" GCC="$GCC -m64" GXX="$GXX -m64" %endif %ifarch sparc64v BuildFlags="-mcpu=niagara -mvis -fcall-used-g6" GCC="$GCC -m64" GXX="$GXX -m64" %endif ############################################################################## # %%build - POWER options. ############################################################################## %ifarch %{power64} BuildFlags="" GCC="$GCC -m64" GXX="$GXX -m64" %ifarch ppc64p7 GCC="$GCC -mcpu=power7 -mtune=power7" GXX="$GXX -mcpu=power7 -mtune=power7" core_with_options="--with-cpu=power7" %endif %ifarch ppc64le GCC="$GCC -mcpu=power8 -mtune=power8" GXX="$GXX -mcpu=power8 -mtune=power8" core_with_options="--with-cpu=power8" %endif %endif ############################################################################## # %%build - Generic options. ############################################################################## BuildFlags="$BuildFlags -fasynchronous-unwind-tables" # Add -DNDEBUG unless using a prerelease case %{version} in *.*.9[0-9]*) ;; *) BuildFlags="$BuildFlags -DNDEBUG" ;; esac EnableKernel="--enable-kernel=%{enablekernel}" # Save the used compiler and options into the file "Gcc" for use later # by %%install. echo "$GCC" > Gcc AddOns=`echo */configure | sed -e 's!/configure!!g;s!\(nptl\|powerpc-cpu\)\( \|$\)!!g;s! \+$!!;s! !,!g;s!^!,!;/^,\*$/d'` ############################################################################## # build() # Build glibc in `build-%{target}$1', passing the rest of the arguments # as CFLAGS to the build (not the same as configure CFLAGS). Several # global values are used to determine build flags, add-ons, kernel # version, multiarch support, system tap support, etc. ############################################################################## build() { builddir=build-%{target}${1:+-$1} ${1+shift} rm -rf $builddir mkdir $builddir pushd $builddir build_CFLAGS="$BuildFlags -g -O3 $*" # Some configure checks can spuriously fail for some architectures if # unwind info is present configure_CFLAGS="$build_CFLAGS -fno-asynchronous-unwind-tables" ../configure CC="$GCC" CXX="$GXX" CFLAGS="$configure_CFLAGS" \ --prefix=%{_prefix} \ --enable-add-ons=$AddOns \ --with-headers=%{_prefix}/include $EnableKernel --enable-bind-now \ --build=%{target} \ %ifarch %{multiarcharches} --enable-multi-arch \ %endif --enable-obsolete-rpc \ --enable-systemtap \ ${core_with_options} \ %ifarch %{lock_elision_arches} --enable-lock-elision \ %endif %if %{without werror} --disable-werror \ %endif --disable-profile \ %if %{with bootstrap} --without-selinux \ --disable-nss-crypt || %else --enable-nss-crypt || %endif { cat config.log; false; } make %{?_smp_mflags} -r CFLAGS="$build_CFLAGS" %{silentrules} popd } ############################################################################## # Build glibc for the default set of options. ############################################################################## build ############################################################################## # Build glibc for xen: # If we support xen build glibc again for xen support. ############################################################################## %if %{buildxen} build nosegneg -mno-tls-direct-seg-refs %endif ############################################################################## # Build glibc for power6: # If we support building a power6 alternate runtime then built glibc again for # power6. # XXX: We build in a sub-shell for no apparent reason. ############################################################################## %if %{buildpower6} ( platform=`LD_SHOW_AUXV=1 /bin/true | sed -n 's/^AT_PLATFORM:[[:blank:]]*//p'` if [ "$platform" != power6 ]; then mkdir -p power6emul/{lib,lib64} $GCC -shared -O2 -fpic -o power6emul/%{_lib}/power6emul.so %{SOURCE8} -Wl,-z,initfirst %ifarch ppc64 gcc -shared -nostdlib -O2 -fpic -m32 -o power6emul/lib/power6emul.so -xc - < /dev/null %endif export LD_PRELOAD=`pwd`/power6emul/\$LIB/power6emul.so fi GCC="$GCC -mcpu=power6" GXX="$GXX -mcpu=power6" core_with_options="--with-cpu=power6" build power6 ) %endif # %{buildpower6} %if %{buildpower7} ( GCC="$GCC -mcpu=power7 -mtune=power7" GXX="$GXX -mcpu=power7 -mtune=power7" core_with_options="--with-cpu=power7" build power7 ) %endif %if %{buildpower8} ( GCC="$GCC -mcpu=power8 -mtune=power8" GXX="$GXX -mcpu=power8 -mtune=power8" core_with_options="--with-cpu=power8" build power8 ) %endif ############################################################################## # Build the glibc post-upgrade program: # We only build one of these with the default set of options. This program # must be able to run on all hardware for the lowest common denomintor since # we only build it once. ############################################################################## pushd build-%{target} $GCC -static -L. -Os -g %{SOURCE2} \ -o glibc_post_upgrade.%{_target_cpu} \ '-DLIBTLS="/%{_lib}/tls/"' \ '-DGCONV_MODULES_DIR="%{_libdir}/gconv"' \ '-DLD_SO_CONF="/etc/ld.so.conf"' \ '-DICONVCONFIG="%{_sbindir}/iconvconfig.%{_target_cpu}"' popd ############################################################################## # Install glibc... ############################################################################## %install # Ensure the permissions of errlist.c do not change. When the file is # regenerated the Makefile sets the permissions to 444. We set it to 644 # to match what comes out of git. The tarball of the git archive won't have # correct permissions because git doesn't track all of the permissions # accurately (see git-cache-meta if you need that). We also set it to 644 to # match pre-existing rpms. We do this *after* the build because the build # might regenerate the file and set the permissions to 444. chmod 644 sysdeps/gnu/errlist.c # Reload compiler and build options that were used during %%build. GCC=`cat Gcc` # Cleanup any previous installs... rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT make -j1 install_root=$RPM_BUILD_ROOT \ install -C build-%{target} %{silentrules} # If we are not building an auxiliary arch then install all of the supported # locales. %ifnarch %{auxarches} pushd build-%{target} make %{?_smp_mflags} install_root=$RPM_BUILD_ROOT \ install-locales -C ../localedata objdir=`pwd` popd %endif # install_different: # Install all core libraries into DESTDIR/SUBDIR. Either the file is # installed as a copy or a symlink to the default install (if it is the # same). The path SUBDIR_UP is the prefix used to go from # DESTDIR/SUBDIR to the default installed libraries e.g. # ln -s SUBDIR_UP/foo.so DESTDIR/SUBDIR/foo.so. # When you call this function it is expected that you are in the root # of the build directory, and that the default build directory is: # "../build-%{target}" (relatively). # The primary use of this function is to install alternate runtimes # into the build directory and avoid duplicating this code for each # runtime. install_different() { local lib libbase libbaseso dlib local destdir="$1" local subdir="$2" local subdir_up="$3" local libdestdir="$destdir/$subdir" # All three arguments must be non-zero paths. if ! [ "$destdir" \ -a "$subdir" \ -a "$subdir_up" ]; then echo "One of the arguments to install_different was emtpy." exit 1 fi # Create the destination directory and the multilib directory. mkdir -p "$destdir" mkdir -p "$libdestdir" # Walk all of the libraries we installed... for lib in libc math/libm nptl/libpthread rt/librt nptl_db/libthread_db do libbase=${lib#*/} # Take care that `libbaseso' has a * that needs expanding so # take care with quoting. libbaseso=$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}-*.so) # Only install if different from default build library. if cmp -s ${lib}.so ../build-%{target}/${lib}.so; then ln -sf "$subdir_up"/$libbaseso $libdestdir/$libbaseso else cp -a ${lib}.so $libdestdir/$libbaseso fi dlib=$libdestdir/$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}.so.*) ln -sf $libbaseso $dlib done } ############################################################################## # Install the xen build files. ############################################################################## %if %{buildxen} %define nosegneg_subdir_base i686 %define nosegneg_subdir i686/nosegneg %define nosegneg_subdir_up ../.. pushd build-%{target}-nosegneg destdir=$RPM_BUILD_ROOT/%{_lib} install_different "$destdir" "%{nosegneg_subdir}" "%{nosegneg_subdir_up}" popd %endif # %{buildxen} ############################################################################## # Install the power6 build files. ############################################################################## %if %{buildpower6} %define power6_subdir power6 %define power6_subdir_up .. %define power6_legacy power6x %define power6_legacy_up .. pushd build-%{target}-power6 destdir=$RPM_BUILD_ROOT/%{_lib} install_different "$destdir" "%{power6_subdir}" "%{power6_subdir_up}" # Make a legacy /usr/lib[64]/power6x directory that is a symlink to the # power6 runtime. # XXX: When can we remove this? What is the history behind this? mkdir -p ${destdir}/%{power6_legacy} pushd ${destdir}/%{power6_legacy} ln -sf %{power6_legacy_up}/%{power6_subdir}/*.so . cp -a %{power6_legacy_up}/%{power6_subdir}/*.so.* . popd popd %endif # %{buildpower6} %if %{buildpower7} %define power7_subdir power7 %define power7_subdir_up .. pushd build-%{target}-power7 destdir=$RPM_BUILD_ROOT/%{_lib} install_different "$destdir" "%{power7_subdir}" "%{power7_subdir_up}" popd %endif %if %{buildpower8} %define power8_subdir power8 %define power8_subdir_up .. pushd build-%{target}-power8 destdir=$RPM_BUILD_ROOT/%{_lib} install_different "$destdir" "%{power8_subdir}" "%{power8_subdir_up}" popd %endif ############################################################################## # Remove the files we don't want to distribute ############################################################################## # Remove the libNoVersion files. # XXX: This looks like a bug in glibc that accidentally installed these # wrong files. We probably don't need this today. rm -f $RPM_BUILD_ROOT%{_libdir}/libNoVersion* rm -f $RPM_BUILD_ROOT/%{_lib}/libNoVersion* # rquota.x and rquota.h are now provided by quota rm -f $RPM_BUILD_ROOT%{_prefix}/include/rpcsvc/rquota.[hx] # In F7+ this is provided by rpcbind rpm rm -f $RPM_BUILD_ROOT%{_sbindir}/rpcinfo # Remove the old nss modules. rm -f ${RPM_BUILD_ROOT}/%{_lib}/libnss1-* rm -f ${RPM_BUILD_ROOT}/%{_lib}/libnss-*.so.1 ############################################################################## # Install info files ############################################################################## %if %{with docs} # Move the info files if glibc installed them into the wrong location. if [ -d $RPM_BUILD_ROOT%{_prefix}/info -a "%{_infodir}" != "%{_prefix}/info" ]; then mkdir -p $RPM_BUILD_ROOT%{_infodir} mv -f $RPM_BUILD_ROOT%{_prefix}/info/* $RPM_BUILD_ROOT%{_infodir} rm -rf $RPM_BUILD_ROOT%{_prefix}/info fi # Compress all of the info files. gzip -9nvf $RPM_BUILD_ROOT%{_infodir}/libc* %else rm -f $RPM_BUILD_ROOT%{_infodir}/dir rm -f $RPM_BUILD_ROOT%{_infodir}/libc.info* %endif ############################################################################## # Create locale sub-package file lists ############################################################################## %ifnarch %{auxarches} olddir=`pwd` pushd ${RPM_BUILD_ROOT}%{_prefix}/lib/locale rm -f locale-archive # Intentionally we do not pass --alias-file=, aliases will be added # by build-locale-archive. $olddir/build-%{target}/elf/ld.so \ --library-path $olddir/build-%{target}/ \ $olddir/build-%{target}/locale/localedef \ --prefix ${RPM_BUILD_ROOT} --add-to-archive \ *_* # Setup the locale-archive template for use by glibc-all-langpacks. mv locale-archive{,.tmpl} # Create the file lists for the language specific sub-packages: for i in *_* do lang=${i%%_*} if [ ! -e langpack-${lang}.filelist ]; then echo "%dir %{_prefix}/lib/locale" >> langpack-${lang}.filelist fi echo "%dir %{_prefix}/lib/locale/$i" >> langpack-${lang}.filelist echo "%{_prefix}/lib/locale/$i/*" >> langpack-${lang}.filelist done popd pushd ${RPM_BUILD_ROOT}%{_prefix}/share/locale for i in */LC_MESSAGES/libc.mo do locale=${i%%%%/*} lang=${locale%%%%_*} echo "%lang($lang) %{_prefix}/share/locale/${i}" \ >> ${RPM_BUILD_ROOT}%{_prefix}/lib/locale/langpack-${lang}.filelist done popd mv ${RPM_BUILD_ROOT}%{_prefix}/lib/locale/*.filelist . %endif ############################################################################## # Install configuration files for services ############################################################################## install -p -m 644 %{SOURCE7} $RPM_BUILD_ROOT/etc/nsswitch.conf %ifnarch %{auxarches} mkdir -p $RPM_BUILD_ROOT/etc/default install -p -m 644 nis/nss $RPM_BUILD_ROOT/etc/default/nss # This is for ncsd - in glibc 2.2 install -m 644 nscd/nscd.conf $RPM_BUILD_ROOT/etc mkdir -p $RPM_BUILD_ROOT%{_tmpfilesdir} install -m 644 %{SOURCE4} %{buildroot}%{_tmpfilesdir} mkdir -p $RPM_BUILD_ROOT/lib/systemd/system install -m 644 nscd/nscd.service nscd/nscd.socket $RPM_BUILD_ROOT/lib/systemd/system %endif # Include ld.so.conf echo 'include ld.so.conf.d/*.conf' > $RPM_BUILD_ROOT/etc/ld.so.conf truncate -s 0 $RPM_BUILD_ROOT/etc/ld.so.cache chmod 644 $RPM_BUILD_ROOT/etc/ld.so.conf mkdir -p $RPM_BUILD_ROOT/etc/ld.so.conf.d %ifnarch %{auxarches} mkdir -p $RPM_BUILD_ROOT/etc/sysconfig truncate -s 0 $RPM_BUILD_ROOT/etc/sysconfig/nscd truncate -s 0 $RPM_BUILD_ROOT/etc/gai.conf %endif # Include %{_libdir}/gconv/gconv-modules.cache truncate -s 0 $RPM_BUILD_ROOT%{_libdir}/gconv/gconv-modules.cache chmod 644 $RPM_BUILD_ROOT%{_libdir}/gconv/gconv-modules.cache ############################################################################## # Misc... ############################################################################## # NPTL is not usable outside of glibc, so include # the generic one (#162634). This header is required by older gcc builds # which shared libio. Once we stop supporting building old compilers which # need shared libio we can remove this. cp -a sysdeps/generic/stdio-lock.h \ $RPM_BUILD_ROOT%{_prefix}/include/bits/stdio-lock.h # And needs sanitizing as well. cp -a %{SOURCE3} $RPM_BUILD_ROOT%{_prefix}/include/bits/libc-lock.h # Install the upgrade program install -m 700 build-%{target}/glibc_post_upgrade.%{_target_cpu} \ $RPM_BUILD_ROOT%{_prefix}/sbin/glibc_post_upgrade.%{_target_cpu} # Strip all of the installed object files. strip -g $RPM_BUILD_ROOT%{_libdir}/*.o # XXX: Ugly hack for buggy rpm. What bug? BZ? Is this fixed? ln -f ${RPM_BUILD_ROOT}%{_sbindir}/iconvconfig{,.%{_target_cpu}} ############################################################################## # Install debug copies of unstripped static libraries # - This step must be last in order to capture any additional static # archives we might have added. ############################################################################## # If we are building a debug package then copy all of the static archives # into the debug directory to keep them as unstripped copies. %if 0%{?_enable_debug_packages} mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/debug%{_libdir} cp -a $RPM_BUILD_ROOT%{_libdir}/*.a \ $RPM_BUILD_ROOT%{_prefix}/lib/debug%{_libdir}/ rm -f $RPM_BUILD_ROOT%{_prefix}/lib/debug%{_libdir}/*_p.a %endif ############################################################################## # Build the file lists used for describing the package and subpackages. ############################################################################## # There are 11 main file lists (and many more for # the langpack sub-packages (langpack-${lang}.filelist)): # * rpm.fileslist # - Master file list. Eventually, after removing files from this list # we are left with the list of files for the glibc package. # * common.filelist # - Contains the list of flies for the common subpackage. # * utils.filelist # - Contains the list of files for the utils subpackage. # * nscd.filelist # - Contains the list of files for the nscd subpackage. # * devel.filelist # - Contains the list of files for the devel subpackage. # * headers.filelist # - Contains the list of files for the headers subpackage. # * static.filelist # - Contains the list of files for the static subpackage. # * nosegneg.filelist # - Contains the list of files for the xen subpackage. # * debuginfo.filelist # - Contains the list of files for the glibc debuginfo package. # * debuginfocommon.filelist # - Contains the list of files for the glibc common debuginfo package. # { find $RPM_BUILD_ROOT \( -type f -o -type l \) \ \( \ -name etc -printf "%%%%config " -o \ -name gconv-modules \ -printf "%%%%verify(not md5 size mtime) %%%%config(noreplace) " -o \ -name gconv-modules.cache \ -printf "%%%%verify(not md5 size mtime) " \ , \ ! -path "*/lib/debug/*" -printf "/%%P\n" \) # Print all directories with a %%dir prefix. We omit the info directory and # all directories in (and including) /usr/share/locale. find $RPM_BUILD_ROOT -type d \ \( -path '*%{_prefix}/share/locale' -prune -o \ \( -path '*%{_prefix}/share/*' \ %if %{with docs} ! -path '*%{_infodir}' -o \ %endif -path "*%{_prefix}/include/*" \ \) -printf "%%%%dir /%%P\n" \) } | { # primary filelist # Also remove the *.mo entries. We will add them to the # language specific sub-packages. # Also remove the locale sources (.*/share/i18n/locales/.* # and .*/share/i18n/charmaps/.*), they go into the sub-package #"locale-source": sed -e '\,.*/share/locale/\([^/_]\+\).*/LC_MESSAGES/.*\.mo,d' \ -e '\,.*/share/i18n/locales/.*,d' \ -e '\,.*/share/i18n/charmaps/.*,d' \ -e '\,/etc/\(localtime\|nsswitch.conf\|ld\.so\.conf\|ld\.so\.cache\|default\|rpc\|gai\.conf\),d' \ -e '\,/%{_lib}/lib\(pcprofile\|memusage\)\.so,d' \ -e '\,bin/\(memusage\|mtrace\|xtrace\|pcprofiledump\),d' } | sort > rpm.filelist touch common.filelist mkdir -p $RPM_BUILD_ROOT%{_libdir} mv -f $RPM_BUILD_ROOT/%{_lib}/lib{pcprofile,memusage}.so $RPM_BUILD_ROOT%{_libdir} # The xtrace and memusage scripts have hard-coded paths that need to be # translated to a correct set of paths using the $LIB token which is # dynamically translated by ld.so as the default lib directory. for i in $RPM_BUILD_ROOT%{_prefix}/bin/{xtrace,memusage}; do sed -e 's~=/%{_lib}/libpcprofile.so~=%{_libdir}/libpcprofile.so~' \ -e 's~=/%{_lib}/libmemusage.so~=%{_libdir}/libmemusage.so~' \ -e 's~='\''/\\\$LIB/libpcprofile.so~='\''%{_prefix}/\\$LIB/libpcprofile.so~' \ -e 's~='\''/\\\$LIB/libmemusage.so~='\''%{_prefix}/\\$LIB/libmemusage.so~' \ -i $i done %if %{with docs} # Put the info files into the devel file list. grep '%{_infodir}' < rpm.filelist | grep -v '%{_infodir}/dir' > devel.filelist %endif # The glibc-headers package includes only common files which are identical # across all multilib packages. We must keep gnu/stubs.h and gnu/lib-names.h # in the glibc-headers package, but the -32, -64, -64-v1, and -64-v2 versions # go into the development packages. grep '%{_prefix}/include/gnu/stubs-.*\.h$' < rpm.filelist >> devel.filelist || : grep '%{_prefix}/include/gnu/lib-names-.*\.h$' < rpm.filelist >> devel.filelist || : # Put the include files into headers file list. grep '%{_prefix}/include' < rpm.filelist \ | egrep -v '%{_prefix}/include/gnu/stubs-.*\.h$' \ | egrep -v '%{_prefix}/include/gnu/lib-names-.*\.h$' \ > headers.filelist # Remove partial (lib*_p.a) static libraries, include files, and info files from # the core glibc package. sed -i -e '\|%{_libdir}/lib.*_p.a|d' \ -e '\|%{_prefix}/include|d' \ -e '\|%{_infodir}|d' \ rpm.filelist # Put some static files into the devel package. grep '%{_libdir}/lib.*\.a' < rpm.filelist \ | grep '/lib\(\(c\|pthread\|nldbl\|mvec\)_nonshared\|g\|ieee\|mcheck\|rpcsvc\)\.a$' \ >> devel.filelist # Put the rest of the static files into the static package. grep '%{_libdir}/lib.*\.a' < rpm.filelist \ | grep -v '/lib\(\(c\|pthread\|nldbl\|mvec\)_nonshared\|g\|ieee\|mcheck\|rpcsvc\)\.a$' \ > static.filelist # Put all of the object files and *.so (not the versioned ones) into the # devel package. grep '%{_libdir}/.*\.o' < rpm.filelist >> devel.filelist grep '%{_libdir}/lib.*\.so' < rpm.filelist >> devel.filelist # Remove all of the static, object, unversioned DSOs, and nscd from the core # glibc package. sed -i -e '\|%{_libdir}/lib.*\.a|d' \ -e '\|%{_libdir}/.*\.o|d' \ -e '\|%{_libdir}/lib.*\.so|d' \ -e '\|nscd|d' rpm.filelist # All of the bin and certain sbin files go into the common package. # We explicitly exclude certain sbin files that need to go into # the core glibc package for use during upgrades. grep '%{_prefix}/bin' < rpm.filelist >> common.filelist grep '%{_prefix}/sbin/[^gi]' < rpm.filelist >> common.filelist # All of the files under share go into the common package since # they should be multilib-independent. grep '%{_prefix}/share' < rpm.filelist | \ grep -v -e '%{_prefix}/share/zoneinfo' -e '%%dir %{prefix}/share' \ >> common.filelist # Remove the bin, locale, some sbin, and share from the # core glibc package. We cheat a bit and use the slightly dangerous # /usr/sbin/[^gi] to match the inverse of the search that put the # files into common.filelist. It's dangerous in that additional files # that start with g, or i would get put into common.filelist and # rpm.filelist. sed -i -e '\|%{_prefix}/bin|d' \ -e '\|%{_prefix}/lib/locale|d' \ -e '\|%{_prefix}/sbin/[^gi]|d' \ -e '\|%{_prefix}/share|d' rpm.filelist ############################################################################## # Build the xen package file list (nosegneg.filelist) ############################################################################## truncate -s 0 nosegneg.filelist %if %{xenpackage} grep '/%{_lib}/%{nosegneg_subdir}' < rpm.filelist >> nosegneg.filelist sed -i -e '\|/%{_lib}/%{nosegneg_subdir}|d' rpm.filelist # TODO: There are files in the nosegneg list which should be in the devel # pacakge, but we leave them instead in the xen subpackage. We may # wish to clean that up at some point. %endif # Add the binary to build locales to the common subpackage. echo '%{_prefix}/sbin/build-locale-archive' >> common.filelist # The nscd binary must go into the nscd subpackage. echo '%{_prefix}/sbin/nscd' > nscd.filelist # The memusage and pcprofile libraries are put back into the core # glibc package even though they are only used by utils package # scripts.. cat >> rpm.filelist < utils.filelist <> benchtests.filelist # ... and the makefile. for b in %{SOURCE9} %{SOURCE10}; do cp $b $RPM_BUILD_ROOT%{_prefix}/libexec/glibc-benchtests/ echo "%{_prefix}/libexec/glibc-benchtests/$(basename $b)" >> benchtests.filelist done # .. and finally, the comparison scripts. cp benchtests/scripts/benchout.schema.json $RPM_BUILD_ROOT%{_prefix}/libexec/glibc-benchtests/ cp benchtests/scripts/compare_bench.py $RPM_BUILD_ROOT%{_prefix}/libexec/glibc-benchtests/ cp benchtests/scripts/import_bench.py $RPM_BUILD_ROOT%{_prefix}/libexec/glibc-benchtests/ cp benchtests/scripts/validate_benchout.py $RPM_BUILD_ROOT%{_prefix}/libexec/glibc-benchtests/ echo "%{_prefix}/libexec/glibc-benchtests/benchout.schema.json" >> benchtests.filelist echo "%{_prefix}/libexec/glibc-benchtests/compare_bench.py*" >> benchtests.filelist echo "%{_prefix}/libexec/glibc-benchtests/import_bench.py*" >> benchtests.filelist echo "%{_prefix}/libexec/glibc-benchtests/validate_benchout.py*" >> benchtests.filelist %endif ############################################################################### # Rebuild libpthread.a using --whole-archive to ensure all of libpthread # is included in a static link. This prevents any problems when linking # statically, using parts of libpthread, and other necessary parts not # being included. Upstream has decided that this is the wrong approach to # this problem and that the full set of dependencies should be resolved # such that static linking works and produces the most minimally sized # static application possible. ############################################################################### pushd $RPM_BUILD_ROOT%{_prefix}/%{_lib}/ $GCC -r -nostdlib -o libpthread.o -Wl,--whole-archive ./libpthread.a rm libpthread.a ar rcs libpthread.a libpthread.o rm libpthread.o popd ############################################################################### %if 0%{?_enable_debug_packages} # The #line directives gperf generates do not give the proper # file name relative to the build directory. pushd locale ln -s programs/*.gperf . popd pushd iconv ln -s ../locale/programs/charmap-kw.gperf . popd # Print some diagnostic information in the builds about the # getconf binaries. # XXX: Why do we do this? ls -l $RPM_BUILD_ROOT%{_prefix}/bin/getconf ls -l $RPM_BUILD_ROOT%{_prefix}/libexec/getconf eu-readelf -hS $RPM_BUILD_ROOT%{_prefix}/bin/getconf \ $RPM_BUILD_ROOT%{_prefix}/libexec/getconf/* find_debuginfo_args='--strict-build-id -g' %ifarch %{debuginfocommonarches} find_debuginfo_args="$find_debuginfo_args \ -l common.filelist \ -l utils.filelist \ -l nscd.filelist \ -p '.*/(sbin|libexec)/.*' \ -o debuginfocommon.filelist \ -l rpm.filelist \ %if %{with benchtests} -l nosegneg.filelist -l benchtests.filelist" %else -l nosegneg.filelist" %endif %endif eval /usr/lib/rpm/find-debuginfo.sh \ "$find_debuginfo_args" \ -o debuginfo.filelist # List all of the *.a archives in the debug directory. list_debug_archives() { local dir=%{_prefix}/lib/debug%{_libdir} find $RPM_BUILD_ROOT$dir -name "*.a" -printf "$dir/%%P\n" } %ifarch %{debuginfocommonarches} # Remove the source files from the common package debuginfo. sed -i '\#^%{_prefix}/src/debug/#d' debuginfocommon.filelist # Create a list of all of the source files we copied to the debug directory. find $RPM_BUILD_ROOT%{_prefix}/src/debug \ \( -type d -printf '%%%%dir ' \) , \ -printf '%{_prefix}/src/debug/%%P\n' > debuginfocommon.sources %ifarch %{biarcharches} # Add the source files to the core debuginfo package. cat debuginfocommon.sources >> debuginfo.filelist %else %ifarch %{ix86} %define basearch i686 %endif %ifarch sparc sparcv9 %define basearch sparc %endif # The auxarches get only these few source files. auxarches_debugsources=\ '/(generic|linux|%{basearch}|nptl(_db)?)/|/%{glibcsrcdir}/build|/dl-osinfo\.h' # Place the source files into the core debuginfo pakcage. egrep "$auxarches_debugsources" debuginfocommon.sources >> debuginfo.filelist # Remove the source files from the common debuginfo package. egrep -v "$auxarches_debugsources" \ debuginfocommon.sources >> debuginfocommon.filelist %endif # %{biarcharches} # Add the list of *.a archives in the debug directory to # the common debuginfo package. list_debug_archives >> debuginfocommon.filelist # It happens that find-debuginfo.sh produces duplicate entries even # though the inputs are unique. Therefore we sort and unique the # entries in the debug file lists. This avoids the following warnings: # ~~~ # Processing files: glibc-debuginfo-common-2.17.90-10.fc20.x86_64 # warning: File listed twice: /usr/lib/debug/usr/sbin/build-locale-archive.debug # warning: File listed twice: /usr/lib/debug/usr/sbin/nscd.debug # warning: File listed twice: /usr/lib/debug/usr/sbin/zdump.debug # warning: File listed twice: /usr/lib/debug/usr/sbin/zic.debug # ~~~ sort -u debuginfocommon.filelist > debuginfocommon2.filelist mv debuginfocommon2.filelist debuginfocommon.filelist %endif # %{debuginfocommonarches} # Remove any duplicates output by a buggy find-debuginfo.sh. sort -u debuginfo.filelist > debuginfo2.filelist mv debuginfo2.filelist debuginfo.filelist # Remove some common directories from the common package debuginfo so that we # don't end up owning them. exclude_common_dirs() { exclude_dirs="%{_prefix}/src/debug" exclude_dirs="$exclude_dirs $(echo %{_prefix}/lib/debug{,/%{_lib},/bin,/sbin})" exclude_dirs="$exclude_dirs $(echo %{_prefix}/lib/debug%{_prefix}{,/%{_lib},/libexec,/bin,/sbin})" for d in $(echo $exclude_dirs | sed 's/ /\n/g'); do sed -i "\|^%%dir $d/\?$|d" $1 done } %ifarch %{debuginfocommonarches} exclude_common_dirs debuginfocommon.filelist %endif exclude_common_dirs debuginfo.filelist %endif # 0%{?_enable_debug_packages} %if %{with docs} # Remove the `dir' info-heirarchy file which will be maintained # by the system as it adds info files to the install. rm -f $RPM_BUILD_ROOT%{_infodir}/dir %endif %ifarch %{auxarches} # Delete files that we do not intended to ship with the auxarch. echo Cutting down the list of unpackaged files sed -e '/%%dir/d;/%%config/d;/%%verify/d;s/%%lang([^)]*) //;s#^/*##' \ common.filelist devel.filelist static.filelist headers.filelist \ utils.filelist nscd.filelist \ %ifarch %{debuginfocommonarches} debuginfocommon.filelist \ %endif | (cd $RPM_BUILD_ROOT; xargs --no-run-if-empty rm -f 2> /dev/null || :) %else mkdir -p $RPM_BUILD_ROOT/var/{db,run}/nscd touch $RPM_BUILD_ROOT/var/{db,run}/nscd/{passwd,group,hosts,services} touch $RPM_BUILD_ROOT/var/run/nscd/{socket,nscd.pid} %endif # %{auxarches} %ifnarch %{auxarches} truncate -s 0 $RPM_BUILD_ROOT/%{_prefix}/lib/locale/locale-archive %endif mkdir -p $RPM_BUILD_ROOT/var/cache/ldconfig truncate -s 0 $RPM_BUILD_ROOT/var/cache/ldconfig/aux-cache ############################################################################## # Run the glibc testsuite ############################################################################## %check %if %{with testsuite} # Run the glibc tests. If any tests fail to build we exit %check with an error # of 1, otherwise we print the test failure list and the failed test output # and exit with 0. In the future we want to compare against a baseline and # exit with 1 if the results deviate from the baseline. run_tests () { truncate -s 0 check.log tail -f check.log & tailpid=$! # Run the make a sub-shell (to avoid %check failing if make fails) # but capture the status for use later. We use the normal sub-shell # trick of printing the status. The actual result of the sub-shell # is the successful execution of the echo. status=$(set +e make %{?_smp_mflags} check %{silentrules} > check.log 2>&1 status=$? echo $status) # Wait for the tail to catch up with the output and then kill it. sleep 10 kill $tailpid # Print the header, so we can find it, but skip the error printing # if there aren't any failrues. echo ===================FAILED TESTS===================== if [ $status -ne 0 ]; then # We are not running with `-k`, therefore a test build failure # terminates the test run and that terminates %check with an # error which terminates the build. We want this behaviour to # ensure that all tests build, and all tests run. # If the test result summary is not present it means one of # tests failed to build. if ! grep 'Summary of test results:' check.log; then echo "FAIL: Some glibc tests failed to build." exit 1 fi # Print out information about all of the failed tests. grep -e ^FAIL -e ^ERROR tests.sum \ | awk '{print $2}' \ | while read testcase; do echo "$testcase" cat $testcase.out echo ------------------------- done fi } # Increase timeouts export TIMEOUTFACTOR=16 parent=$$ echo ====================TESTING========================= ############################################################################## # - Test the default runtime. # - Power 620 / 970 ISA for 64-bit POWER BE. # - POWER8 for 64-bit POWER LE. # - ??? for 64-bit x86_64 # - ??? for 32-bit x86 # - ??? for 64-bit AArch64 # - ??? for 32-bit ARM # - ??? for 64-bit s390x # - ??? for 32-bit s390 ############################################################################## pushd build-%{target} run_tests popd %if %{buildxen} echo ====================TESTING -mno-tls-direct-seg-refs============= ############################################################################## # - Test the xen runtimes (nosegneg). ############################################################################## pushd build-%{target}-nosegneg run_tests popd %endif %if %{buildpower6} echo ====================TESTING -mcpu=power6============= ############################################################################## # - Test the 64-bit POWER6 BE runtimes. ############################################################################## pushd build-%{target}-power6 if [ -d ../power6emul ]; then export LD_PRELOAD=`cd ../power6emul; pwd`/\$LIB/power6emul.so fi run_tests popd %endif %if %{buildpower7} echo ====================TESTING -mcpu=power7============= ############################################################################## # - Test the 64-bit POWER7 BE runtimes. ############################################################################## pushd build-%{target}-power7 run_tests popd %endif %if %{buildpower8} echo ====================TESTING -mcpu=power8============= ############################################################################## # - Test the 64-bit POWER8 BE runtimes. ############################################################################## pushd build-%{target}-power8 run_tests popd %endif echo ====================TESTING DETAILS================= for i in `sed -n 's|^.*\*\*\* \[\([^]]*\.out\)\].*$|\1|p' build-*-linux*/check.log`; do echo =====$i===== cat $i || : echo ============ done echo ====================TESTING END===================== PLTCMD='/^Relocation section .*\(\.rela\?\.plt\|\.rela\.IA_64\.pltoff\)/,/^$/p' echo ====================PLT RELOCS LD.SO================ readelf -Wr $RPM_BUILD_ROOT/%{_lib}/ld-*.so | sed -n -e "$PLTCMD" echo ====================PLT RELOCS LIBC.SO============== readelf -Wr $RPM_BUILD_ROOT/%{_lib}/libc-*.so | sed -n -e "$PLTCMD" echo ====================PLT RELOCS END================== %if %{with valgrind} # Finally, check if valgrind runs with the new glibc. # We want to fail building if valgrind is not able to run with this glibc so # that we can then coordinate with valgrind to get it fixed before we update # glibc. pushd build-%{target} elf/ld.so --library-path .:elf:nptl:dlfcn /usr/bin/valgrind \ elf/ld.so --library-path .:elf:nptl:dlfcn /usr/bin/true popd %endif %endif # %{run_glibc_tests} %pre -p -- Check that the running kernel is new enough required = '%{enablekernel}' rel = posix.uname("%r") if rpm.vercmp(rel, required) < 0 then error("FATAL: kernel too old", 0) end %post -p %{_prefix}/sbin/glibc_post_upgrade.%{_target_cpu} %postun -p /sbin/ldconfig %posttrans all-langpacks -p -- If at the end of the transaction we are still installed -- (have a template of non-zero size), then we rebuild the -- locale cache (locale-archive) from the pre-populated -- locale cache (locale-archive.tmpl) i.e. template. if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then pid = posix.fork() if pid == 0 then posix.exec("%{_prefix}/sbin/build-locale-archive", "--install-langs", rpm.expand("%%{_install_langs}")) elseif pid > 0 then posix.wait(pid) end end %postun all-langpacks -p -- In the postun we always remove the locale cache. -- We are being uninstalled and if this is an upgrade -- then the new packages template will be used to -- recreate a new copy of the cache. os.remove("%{_prefix}/lib/locale/locale-archive") %if %{with docs} %post devel /sbin/install-info %{_infodir}/libc.info.gz %{_infodir}/dir > /dev/null 2>&1 || : %endif %pre headers # this used to be a link and it is causing nightmares now if [ -L %{_prefix}/include/scsi ] ; then rm -f %{_prefix}/include/scsi fi %if %{with docs} %preun devel if [ "$1" = 0 ]; then /sbin/install-info --delete %{_infodir}/libc.info.gz %{_infodir}/dir > /dev/null 2>&1 || : fi %endif %post utils -p /sbin/ldconfig %postun utils -p /sbin/ldconfig %pre -n nscd getent group nscd >/dev/null || /usr/sbin/groupadd -g 28 -r nscd getent passwd nscd >/dev/null || /usr/sbin/useradd -M -o -r -d / -s /sbin/nologin \ -c "NSCD Daemon" -u 28 -g nscd nscd %post -n nscd %systemd_post nscd.service %preun -n nscd %systemd_preun nscd.service %postun -n nscd if test $1 = 0; then /usr/sbin/userdel nscd > /dev/null 2>&1 || : fi %systemd_postun_with_restart nscd.service %if %{xenpackage} %post xen -p /sbin/ldconfig %postun xen -p /sbin/ldconfig %endif %clean rm -rf "$RPM_BUILD_ROOT" rm -f *.filelist* %files -f rpm.filelist %defattr(-,root,root) %dir %{_prefix}/%{_lib}/audit %if %{buildxen} && !%{xenpackage} %dir /%{_lib}/%{nosegneg_subdir_base} %dir /%{_lib}/%{nosegneg_subdir} %endif %if %{buildpower6} %dir /%{_lib}/power6 %dir /%{_lib}/power6x %endif %if %{buildpower7} %dir /%{_lib}/power7 %endif %if %{buildpower8} %dir /%{_lib}/power8 %endif %ifarch s390x /lib/ld64.so.1 %endif %ifarch armv7hl armv7hnl /lib/ld-linux.so.3 %endif %verify(not md5 size mtime) %config(noreplace) /etc/nsswitch.conf %verify(not md5 size mtime) %config(noreplace) /etc/ld.so.conf %verify(not md5 size mtime) %config(noreplace) /etc/rpc %dir /etc/ld.so.conf.d %dir %{_prefix}/libexec/getconf %dir %{_libdir}/gconv %dir %attr(0700,root,root) /var/cache/ldconfig %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/cache/ldconfig/aux-cache %attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/ld.so.cache %attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/gai.conf %doc README NEWS INSTALL BUGS PROJECTS CONFORMANCE elf/rtld-debugger-interface.txt # If rpm doesn't support %license, then use %doc instead. %{!?_licensedir:%global license %%doc} %license COPYING COPYING.LIB LICENSES %doc hesiod/README.hesiod %if %{xenpackage} %files -f nosegneg.filelist xen %defattr(-,root,root) %dir /%{_lib}/%{nosegneg_subdir_base} %dir /%{_lib}/%{nosegneg_subdir} %endif %ifnarch %{auxarches} %files -f common.filelist common %defattr(-,root,root) %dir %{_prefix}/lib/locale %dir %{_prefix}/lib/locale/C.utf8 %{_prefix}/lib/locale/C.utf8/* %dir %attr(755,root,root) /etc/default %verify(not md5 size mtime) %config(noreplace) /etc/default/nss %doc documentation/* %files all-langpacks %attr(0644,root,root) %verify(not md5 size mtime) %{_prefix}/lib/locale/locale-archive.tmpl %attr(0644,root,root) %verify(not md5 size mtime mode) %ghost %config(missingok,noreplace) %{_prefix}/lib/locale/locale-archive %files locale-source %defattr(-,root,root) %dir %{_prefix}/share/i18n/locales %{_prefix}/share/i18n/locales/* %dir %{_prefix}/share/i18n/charmaps %{_prefix}/share/i18n/charmaps/* %files -f devel.filelist devel %defattr(-,root,root) %files -f static.filelist static %defattr(-,root,root) %files -f headers.filelist headers %defattr(-,root,root) %files -f utils.filelist utils %defattr(-,root,root) %files -f nscd.filelist -n nscd %defattr(-,root,root) %config(noreplace) /etc/nscd.conf %dir %attr(0755,root,root) /var/run/nscd %dir %attr(0755,root,root) /var/db/nscd /lib/systemd/system/nscd.service /lib/systemd/system/nscd.socket %{_tmpfilesdir}/nscd.conf %attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/nscd.pid %attr(0666,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/socket %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/passwd %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/group %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/hosts %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/services %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/passwd %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/group %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/hosts %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/services %ghost %config(missingok,noreplace) /etc/sysconfig/nscd %endif %if 0%{?_enable_debug_packages} %files debuginfo -f debuginfo.filelist %defattr(-,root,root) %ifarch %{debuginfocommonarches} %ifnarch %{auxarches} %files debuginfo-common -f debuginfocommon.filelist %defattr(-,root,root) %endif %endif %endif %if %{with benchtests} %files benchtests -f benchtests.filelist %defattr(-,root,root) %endif %changelog * Sun Mar 6 2016 Florian Weimer - 2.23.90-4 - Remove extend_alloca (#1315108) * Mon Feb 29 2016 Carlos O'Donell - 2.23.90-3 - Enhance support for upgrading from a non-language-pack system. * Fri Feb 26 2016 Mike FABIAN - 2.23.90-2 - Create new language packages for all supported languages. Locales, translations, and locale sources are split into distinct sub-packages. A meta-package is created for users to install all languages. Transparent installation support is provided via dnf langpacks. * Fri Feb 26 2016 Carlos O'Donell - 2.23.90-1 - Upstream development version is now 2.23.90. * Thu Feb 25 2016 Carlos O'Donell - 2.22.90-38 - Auto-sync with upstream master. * Fri Feb 19 2016 Florian Weimer - 2.22.90-37 - Remove stray newline from Serbian locales (#1114591). * Tue Feb 16 2016 CArlos O'Donell - 2.22.90-36 - Fix CVE-2015-7547: getaddrinfo() stack-based buffer overflow (#1308943). * Mon Feb 15 2016 Florian Weimer - 2.22.90-35 - Revert may_alias attribute for struct sockaddr (#1306511). - Revert upstream commit 2212c1420c92a33b0e0bd9a34938c9814a56c0f7 (#1252570). * Sat Feb 13 2016 Florian Weimer - 2.22.90-34 - Auto-sync with upstream master. - Support aliasing with struct sockaddr pointers (#1306511). * Tue Feb 09 2016 Carlos O'Donell - 2.22.90-33 - Use --with-cpu=power8 for ppc64le default runtime (#1227361). * Tue Feb 02 2016 Florian Weimer - 2.22.90-32 - Auto-sync with upstream master. - Add glibc-isinf-cxx11.patch to improve C++11 compatibility. * Thu Jan 28 2016 Florian Weimer - 2.22.90-31 - Add workaround for GCC PR69537. * Thu Jan 28 2016 Florian Weimer - 2.22.90-30 - Auto-sync with upstream master. * Wed Jan 13 2016 Carlos O'Donell - 2.22.90-29 - New pthread_barrier algorithm with improved standards compliance. * Wed Jan 13 2016 Carlos O'Donell - 2.22.90-28 - Add group merging support for distributed management (#1146822). * Tue Jan 12 2016 Carlos O'Donell - 2.22.90-27 - Remove 32-bit POWER support. - Add 64-bit POWER7 BE and 64-bit POWER8 BE optimized libraries. * Mon Dec 21 2015 Florian Weimer - 2.22.90-26 - Auto-sync with upstream master. * Wed Dec 16 2015 Florian Weimer - 2.22.90-25 - Auto-sync with upstream master. - Includes fix for malloc assertion failure in get_free_list. (#1281714) - Drop Unicode 8.0 patches (now merged upstream). * Sat Dec 5 2015 Florian Weimer - 2.22.90-24 - Put libmvec_nonshared.a into the -devel package. (#1288738) * Sat Dec 05 2015 Florian Weimer - 2.22.90-23 - Auto-sync with upstream master. * Thu Nov 26 2015 Carlos O'Donell - 2.22.90-22 - The generic hidden directive support is already used for preinit/init/fini-array symbols so we drop the Fedora-specific patch that does the same thing. Reported by Dmitry V. Levin * Thu Nov 26 2015 DJ Delorie - 2.22.90-22 - Require glibc-static for C++ tests. - Require gcc-c++, libstdc++-static, and glibc-static only when needed. - Fix --without docs to not leave info files. * Fri Nov 20 2015 Florian Weimer - 2.22.90-21 - Auto-sync with upstream master. * Wed Nov 18 2015 Florian Weimer - 2.22.90-20 - Auto-sync with upstream master. * Wed Nov 18 2015 Florian Weimer - 2.22.90-19 - Disable -Werror on s390 (#1283184). * Mon Nov 16 2015 Florian Weimer - 2.22.90-18 - Auto-sync with upstream master. * Mon Nov 16 2015 Florian Weimer - 2.22.90-17 - Revert temporary armhfp build fix. * Mon Nov 9 2015 Florian Weimer - 2.22.90-16 - Apply temporary fix for armhfp build issue. * Mon Nov 09 2015 Florian Weimer - 2.22.90-15 - Auto-sync with upstream master. * Tue Nov 3 2015 Florian Weimer - 2.22.90-14 - Log uname, cpuinfo, meminfo during build (#1276636) * Fri Oct 30 2015 Florian Weimer - 2.22.90-13 - Auto-sync with upstream master. * Fri Oct 30 2015 Florian Weimer - 2.22.90-12 - Revert to upstream implementation of condition variables (#1229659) * Wed Oct 28 2015 Florian Weimer - 2.22.90-11 - Disable valgrind test on ppc64p7, too. * Mon Oct 26 2015 Carlos O'Donell - 2.22.90-10 - Disable valgrind test for ppc64. * Wed Oct 21 2015 Carlos O'Donell - 2.22.90-9 - Sync with upstream master. - Update new condvar implementation. * Fri Oct 9 2015 Carlos O'Donell - 2.22.90-8 - Remove libbsd.a (#1193168). * Wed Sep 16 2015 Mike FABIAN - 2.22.90-7 - Add the C.UTF-8 locale (#902094). * Wed Sep 16 2015 Carlos O'Donell - 2.22.90-6 - Fix GCC 5 and -Werror related build failures. - Fix --install-langs bug which causes SIGABRT (#1262040). * Fri Aug 28 2015 Carlos O'Donell - 2.22.90-5 - Auto-sync with upstream master. * Thu Aug 27 2015 Carlos O'Donell - 2.22.90-4 - Build require gcc-c++ for the C++ tests. - Support --without testsuite option to disable testing after build. - Support --without benchtests option to disable microbenchmarks. - Update --with bootstrap to disable benchtests, valgrind, documentation, selinux, and nss-crypt during bootstrap. - Support --without werror to disable building with -Werror. - Support --without docs to disable build requirement on texinfo. - Support --without valgrind to disable testing with valgrind. - Remove c_stubs add-on and enable fuller support for static binaries. - Remove librtkaio support (#1227855). * Sun Aug 16 2015 Siddhesh Poyarekar - 2.22.90-3 - Auto-sync with upstream master. * Fri Aug 14 2015 Siddhesh Poyarekar - 2.22.90-2 - Remove initgroups from the default nsswitch.conf (#751450). * Fri Aug 14 2015 Siddhesh Poyarekar - 2.22.90-1 - Sync with upstream master. * Tue Jul 28 2015 Siddhesh Poyarekar - 2.21.90-20 - Sync with upstream master. * Thu Jul 23 2015 Mike FABIAN - 2.21.90-19 - some more additions to the translit_neutral file by Marko Myllynen * Tue Jul 14 2015 Mike FABIAN - 2.21.90-18 - Unicode 8.0.0 updates, including the transliteration files (#1238412). * Sun Jun 21 2015 Carlos O'Donell - 2.21.90-17 - Remove all linuxthreads handling from glibc spec file. * Wed Jun 17 2015 Carlos O'Donell - 2.21.90-16 - Move split out architecture-dependent header files into devel package and keep generic variant in headers package, thus keeping headers package content and file list identical across multilib rpms. * Wed Jun 17 2015 Fedora Release Engineering - 2.21.90-15.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Wed Jun 3 2015 Carlos O'Donell - 2.21.90-15 - Remove patch to increase DTV surplus which is no longer needed after upstream commit f8aeae347377f3dfa8cbadde057adf1827fb1d44. * Sat May 30 2015 Siddhesh Poyarekar - 2.21.90-14 - Fix build failure on aarch64 (#1226459). * Mon May 18 2015 Siddhesh Poyarekar - 2.21.90-13 - Sync with upstream master. - Install new condvar implementation. * Fri May 08 2015 Siddhesh Poyarekar - 2.21.90-12 - Add benchmark comparison scripts. * Thu May 07 2015 Siddhesh Poyarekar - 2.21.90-11 - Auto-sync with upstream master. - Revert arena threshold fix to work around #1209451. * Tue Apr 07 2015 Siddhesh Poyarekar - 2.21.90-10 - Revert last auto-sync (#1209451). * Mon Apr 06 2015 Siddhesh Poyarekar - 2.21.90-9 - Auto-sync with upstream master. * Tue Mar 24 2015 Siddhesh Poyarekar - 2.21.90-8 - Auto-sync with upstream master. * Tue Mar 17 2015 Carlos O'Donell - 2.21.90-7 - Use rpm.expand in scripts to reduce set of required RPM features. * Thu Mar 12 2015 Siddhesh Poyarekar - 2.21.90-6 - Auto-sync with upstream master. * Tue Mar 3 2015 Mike Fabian - 2.21.90-5 - Support installing only those locales specified by the RPM macro %%_install_langs (#156477). * Mon Feb 23 2015 Siddhesh Poyarekar - 2.21.90-4 - Auto-sync with upstream master. * Sat Feb 21 2015 Till Maas - 2.21.90-3.1 - Rebuilt for Fedora 23 Change https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code * Thu Feb 12 2015 Carlos O'Donell - 2.21.90-3 - Fix missing clock_* IFUNCs in librtkaio. * Thu Feb 12 2015 Carlos O'Donell - 2.21.90-2 - Auto-sync with upstream master. * Wed Feb 11 2015 Carlos O'Donell - 2.21.90-1 - Add back x86 vDSO support. - Fix rtkaio build to reference clock_* functions from libc. * Wed Jan 21 2015 Siddhesh Poyarekar - 2.20.90-20 - Sync with upstream master. - Disable werror on s390x. - Revert x86 vDSO support since it breaks i686 rtkaio build. * Tue Jan 20 2015 Peter Robinson 2.20.90-19 - Drop large ancient ChangeLogs (rhbz #1169546) * Mon Jan 12 2015 Siddhesh Poyarekar - 2.20.90-18 - Pass address of main_arena.mutex to mutex_lock/unlock. * Thu Jan 08 2015 Siddhesh Poyarekar - 2.20.90-17 - Define a __tls_get_addr macro to avoid a conflicting declaration. * Wed Jan 07 2015 Siddhesh Poyarekar - 2.20.90-16 - Disable -Werror for s390 as well. * Wed Jan 07 2015 Siddhesh Poyarekar - 2.20.90-14 - Sync with upstream master. - Disable -Werror on powerpc and armv7hl. - Temporarily disable valgrind test on ppc64. * Sun Dec 28 2014 Dan Horák - valgrind available only on selected arches (missing on s390) * Wed Dec 10 2014 Kyle McMartin - aarch64: Drop strchrnul.S revert, apply fix from Richard Earnshaw. * Fri Dec 05 2014 Carlos O'Donell - 2.20.90-13 - Fix permission of debuginfo source files to allow multiarch debuginfo packages to be installed and upgraded. * Fri Dec 05 2014 Siddhesh Poyarekar - 2.20.90-12 - Remove LIB_LANG since we don't install locales in /usr/lib/locale anymore. - Don't own any directories in /usr/share/locale (#1167445). - Use the %%find_lang macro to get the *.mo files (#1167445). - Add %%lang tags to language locale files in /usr/share/i18n/locale (#1169044). * Wed Dec 03 2014 Kyle McMartin - 2.20.90-11 - aarch64: revert optimized strchrnul.S implementation (rhbz#1167501) until it can be debugged. * Fri Nov 28 2014 Carlos O'Donell - 2.20.90-10 - Auto-sync with upstream master. * Wed Nov 19 2014 Carlos O'Donell - 2.20.90-9 - Sync with upstream master. * Wed Nov 05 2014 Siddhesh Poyarekar - 2.20.90-8 - Make getconf return only /usr/bin (#1138835). - Sync with upstream master. * Tue Nov 04 2014 Arjun Shankar - 2.20.90-7 - Add patch that modifies several tests to use test-skeleton.c. The patch is accepted but not yet committed upstream. https://sourceware.org/ml/libc-alpha/2014-10/msg00744.html * Tue Sep 30 2014 Siddhesh Poyarekar - 2.20.90-6 - Sync with upstream master. - Disable more Intel TSX usage in rwlocks (#1146967). - Enable lock elision again on s390 and s390x. - Enable Systemtap SDT probes for all architectures (#985109). * Fri Sep 26 2014 Carlos O'Donell - 2.20.90-5 - Disable lock elision support for Intel hardware until microcode updates can be done in early bootup (#1146967). - Fix building test tst-strtod-round for ARM. * Tue Sep 23 2014 Siddhesh Poyarekar - 2.20.90-4 - Sync with upstream master. - Don't own the common debuginfo directories (#1144853). - Run valgrind in the %%check section to ensure that it does not break. * Tue Sep 16 2014 Siddhesh Poyarekar - 2.20.90-3 - Sync with upstream master. - Revert patch for #737223. * Mon Sep 08 2014 Siddhesh Poyarekar - 2.20.90-2 - Build build-locale-archive statically again. * Mon Sep 08 2014 Siddhesh Poyarekar - 2.20.90-1 - Sync with upstream master. * Thu Sep 4 2014 Carlos O'Donell - 2.19.90-36 - Allow up to 32 dlopened modules to use static TLS (#1124987). - Run glibc tests in %%check section of RPM spec file. - Do not run tests with `-k` and fail if any test fails to build. * Tue Aug 26 2014 Siddhesh Poyarekar - 2.19.90-35 - Sync with upstream master. - Use INTERNAL_SYSCALL in TLS_INIT_TP (#1133134). - Remove gconv loadable module transliteration support (CVE-2014-5119, #1119128). * Fri Aug 22 2014 Dennis Gilmore - 2.19.90-34 - add back sss to nsswitch.conf we have added workarounds in the tools * Thu Aug 21 2014 Kevin Fenzi - 2.19.90-33.1 - Rebuild for rpm bug 1131960 * Tue Aug 19 2014 Dennis Gilmore - 2.19.90-33 - remove sss from default nsswitch.conf it causes issues with live image composing * Wed Aug 13 2014 Siddhesh Poyarekar - 2.19.90-32 - Auto-sync with upstream master. - Revert to only defining __extern_always_inline for g++-4.3+. - Fix build failure in compat-gcc-32 (#186410). * Mon Jul 28 2014 Siddhesh Poyarekar - 2.19.90-31 - Auto-sync with upstream master. * Wed Jul 23 2014 Siddhesh Poyarekar - 2.19.90-30 - Undo last master sync to fix up rawhide. * Tue Jul 15 2014 Siddhesh Poyarekar - 2.19.90-29 - Auto-sync with upstream master. * Sat Jul 12 2014 Tom Callaway - 2.19.90-28 - fix license handling * Mon Jul 07 2014 Siddhesh Poyarekar - 2.19.90-27 - Auto-sync with upstream master. * Fri Jul 04 2014 Siddhesh Poyarekar - 2.19.90-26 - Sync with upstream roland/nptl branch. - Improve testsuite failure outputs in build.log * Thu Jul 03 2014 Siddhesh Poyarekar - 2.19.90-25 - Sync with upstream roland/nptl branch. * Wed Jul 02 2014 Siddhesh Poyarekar - 2.19.90-24 - Sync with upstream master. * Tue Jun 24 2014 Siddhesh Poyarekar - 2.19.90-23 - Sync with upstream master. - Add fix to unbreak i386 ABI breakage due to a change in scalbn. * Fri Jun 20 2014 Kyle McMartin - 2.19.90-22 - AArch64: Save & restore NZCV (flags) upon entry to _dl_tlsdesc_dynamic in order to work around GCC reordering compares across the TLS descriptor sequence (GCC PR61545.) Committing a (temporary) fix here allows us to avoid rebuilding the world with gcc 4.9.0-11.fc21. * Mon Jun 16 2014 Kyle McMartin - 2.19.90-21 - Auto-sync with upstream master. * Thu Jun 12 2014 Siddhesh Poyarekar - 2.19.90-20 - Auto-sync with upstream master. * Sat Jun 07 2014 Fedora Release Engineering - 2.19.90-19.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Tue Jun 03 2014 Siddhesh Poyarekar - 2.19.90-19 - Sync with upstream master. * Mon May 26 2014 Siddhesh Poyarekar - 2.19.90-18 - Sync with upstream master. - Adjust rtkaio patches to build with upstream master. * Wed May 21 2014 Kyle McMartin - 2.19.90-17 - Backport some upstream-wards patches to fix TLS issues on AArch64. * Wed May 21 2014 Kyle McMartin - 2.19.90-16 - AArch64: Fix handling of nocancel syscall failures (#1098327) * Thu May 15 2014 Siddhesh Poyarekar - 2.19.90-15 - Sync with upstream master. * Wed May 14 2014 Carlos O'Donell - 2.19.90-14 - Add support for displaying all test results in build logs. * Wed May 14 2014 Carlos O'Donell - 2.19.90-13 - Add initial support for ppc64le. * Tue Apr 29 2014 Siddhesh Poyarekar - 2.19.90-12 - Auto-sync with upstream master. - Remove ports addon. * Fri Apr 18 2014 Siddhesh Poyarekar - 2.19.90-11 - Sync with upstream master. * Thu Apr 10 2014 Siddhesh Poyarekar - 2.19.90-10 - Sync with upstream master. * Thu Apr 03 2014 Siddhesh Poyarekar - 2.19.90-9 - Sync with upstream master. * Wed Mar 26 2014 Siddhesh Poyarekar - 2.19.90-8 - Sync with upstream master. * Wed Mar 19 2014 Siddhesh Poyarekar - 2.19.90-7 - Sync with upstream master. - Fix offset computation for append+ mode on switching from read (#1078355). * Wed Mar 12 2014 Carlos O'Donell - 2.19.90-6 - Sync with upstream master. - Use cleaner upstream solution for -ftree-loop-distribute-patterns (#911307). * Tue Mar 04 2014 Siddhesh Poyarekar - 2.19.90-5 - Sync with upstream master. * Thu Feb 27 2014 Siddhesh Poyarekar - 2.19.90-4 - Use nscd service files from glibc sources. - Make nscd service forking in systemd service file. * Tue Feb 25 2014 Siddhesh Poyarekar - 2.19.90-3 - Sync with upstream master. - Separate ftell from fseek logic and avoid modifying FILE data (#1069559). * Mon Feb 24 2014 Carlos O'Donell - 2.19.90-2 - Fix build-locale-archive failure to open default template. * Tue Feb 18 2014 Siddhesh Poyarekar - 2.19.90-1 - Sync with upstream master. * Tue Feb 04 2014 Siddhesh Poyarekar - 2.18.90-27 - Sync with upstream master. * Wed Jan 29 2014 Siddhesh Poyarekar - 2.18.90-26 - Modify regular expressions to include powerpcle stubs-*.h (#1058258). * Wed Jan 29 2014 Siddhesh Poyarekar - 2.18.90-25 - Sync with upstream master. * Sat Jan 25 2014 Ville Skyttä - 2.18.90-24 - Own the %%{_prefix}/lib/locale dir. * Thu Jan 23 2014 Siddhesh Poyarekar - 2.18.90-23 - Sync with upstream master. * Thu Jan 16 2014 Siddhesh Poyarekar - 2.18.90-22 - Back out ftell test case (#1052846). * Tue Jan 14 2014 Siddhesh Poyarekar - 2.18.90-21 - Sync with upstream master. - Fix infinite loop in ftell when writing wide char data (#1052846). * Tue Jan 7 2014 Siddhesh Poyarekar - 2.18.90-20 - Sync with upstream master. - Enable systemtap probes on Power and S/390.