%define glibcsrcdir glibc-2.21 %define glibcversion 2.21 %define glibcrelease 8%{?dist} # Pre-release tarballs are pulled in from git using a command that is # effectively: # # git archive HEAD --format=tar --prefix=$(git describe --match 'glibc-*')/ \ # > $(git describe --match 'glibc-*').tar # gzip -9 $(git describe --match 'glibc-*').tar # # glibc_release_url is only defined when we have a release tarball. %define glibc_release_url http://ftp.gnu.org/gnu/glibc/ ############################################################################## # If run_glibc_tests is zero then tests are not run for the build. # You must always set run_glibc_tests to one for production builds. %define run_glibc_tests 1 # Run valgrind test to ensure compatibility. %ifarch %{ix86} x86_64 ppc ppc64le s390x armv7hl aarch64 %define run_valgrind_tests 1 %endif # Disable -Werror in builds for these architectures %ifarch s390x %define disable_werror 1 %endif # Disable -Werror if we're bootstrapping %{!?_with_bootstrap: %global disable_werror 1} ############################################################################## # Auxiliary arches are those arches that can be built in addition # to the core supported arches. You either install an auxarch or # you install the base arch, not both. You would do this in order # to provide a more optimized version of the package for your arch. %define auxarches athlon alphaev6 ############################################################################## # Enable lock elision support for these architectures # # At the moment lock elision is disabled on x86_64 until there's a CPU that # would actually benefit from enabling it. Intel released a microcode update # to disable HLE and RTM at boot and the Fedora kernel now applies it early # enough that keeping lock elision enabled should be harmless, but we have # disabled it anyway as a conservative measure. %define lock_elision_arches s390 s390x ############################################################################## # We build a special package for Xen that includes TLS support with # no negative segment offsets for use with Xen guests. This is # purely an optimization for increased performance on those arches. %define xenarches i686 athlon %ifarch %{xenarches} %define buildxen 1 %define xenpackage 0 %else %define buildxen 0 %define xenpackage 0 %endif ############################################################################## # For Power we actually support alternate runtimes in the same base package. # If we build for Power or Power64 we additionally build a power6 runtime that # is enabled by AT_HWCAPS selection and an alternate runtime directory. %ifarch ppc ppc64 %define buildpower6 1 %else %define buildpower6 0 %endif ############################################################################## # We build librtkaio for all rtkaioarches. The library is installed into # a distinct subdirectory in the lib dir. This define enables the rtkaio # add-on during the build. Upstream does not have rtkaio and it is provided # strictly as part of our builds. %define rtkaioarches %{ix86} x86_64 ppc %{power64} s390 s390x ############################################################################## # Any architecture/kernel combination that supports running 32-bit and 64-bit # code in userspace is considered a biarch arch. %define biarcharches %{ix86} x86_64 ppc %{power64} s390 s390x ############################################################################## # If the debug information is split into two packages, the core debuginfo # pacakge and the common debuginfo package then the arch should be listed # here. If the arch is not listed here then a single core debuginfo package # will be created for the architecture. %define debuginfocommonarches %{biarcharches} alpha alphaev6 ############################################################################## # If the architecture has multiarch support in glibc then it should be listed # here to enable support in the build. Multiarch support is a single library # with implementations of certain functions for multiple architectures. The # most optimal function is selected at runtime based on the hardware that is # detected by glibc. The underlying support for function selection and # execution is provided by STT_GNU_IFUNC. %define multiarcharches ppc %{power64} %{ix86} x86_64 %{sparc} ############################################################################## # Add -s for a less verbose build output. %define silentrules PARALLELMFLAGS= ############################################################################## # %%package glibc - The GNU C Library (glibc) core package. ############################################################################## Summary: The GNU libc libraries Name: glibc Version: %{glibcversion} Release: %{glibcrelease} # GPLv2+ is used in a bunch of programs, LGPLv2+ is used for libraries. # Things that are linked directly into dynamically linked programs # and shared libraries (e.g. crt files, lib*_nonshared.a) have an additional # exception which allows linking it into any kind of programs or shared # libraries without restrictions. License: LGPLv2+ and LGPLv2+ with exceptions and GPLv2+ Group: System Environment/Libraries URL: http://www.gnu.org/software/glibc/ Source0: %{?glibc_release_url}%{glibcsrcdir}.tar.gz Source1: build-locale-archive.c Source2: glibc_post_upgrade.c Source3: libc-lock.h Source4: nscd.conf Source7: nsswitch.conf Source8: power6emul.c ############################################################################## # Start of glibc patches ############################################################################## # 0000-0999 for patches which are unlikely to ever go upstream or which # have not been analyzed to see if they ought to go upstream yet. # # 1000-2000 for patches that are already upstream. # # 2000-3000 for patches that are awaiting upstream approval # # Yes, I realize this means some gratutious changes as patches to from # one bucket to another, but I find this scheme makes it easier to track # the upstream divergence and patches needing approval. # # Note that we can still apply the patches in any order we see fit, so # the changes from one bucket to another won't necessarily result in needing # to twiddle the patch because of dependencies on prior patches and the like. ############################################################################## # # Patches that are unlikely to go upstream or not yet analyzed. # ############################################################################## # Configuration twiddle, not sure there's a good case to get upstream to # change this. Patch0001: %{name}-fedora-nscd.patch Patch0003: %{name}-fedora-ldd.patch Patch0004: %{name}-fedora-ppc-unwind.patch # Build info files in the source tree, then move to the build # tree so that they're identical for multilib builds Patch0005: %{name}-rh825061.patch # Horrible hack, never to be upstreamed. Can go away once the world # has been rebuilt to use the new ld.so path. Patch0006: %{name}-arm-hardfloat-3.patch # Needs to be sent upstream Patch0009: %{name}-fedora-include-bits-ldbl.patch # All these were from the glibc-fedora.patch mega-patch and need another # round of reviewing. Ideally they'll either be submitted upstream or # dropped. Patch0012: %{name}-fedora-linux-tcsetattr.patch Patch0014: %{name}-fedora-nptl-linklibc.patch Patch0015: %{name}-fedora-localedef.patch Patch0016: %{name}-fedora-i386-tls-direct-seg-refs.patch Patch0019: %{name}-fedora-nis-rh188246.patch Patch0020: %{name}-fedora-manual-dircategory.patch Patch0024: %{name}-fedora-locarchive.patch Patch0025: %{name}-fedora-streams-rh436349.patch Patch0028: %{name}-fedora-localedata-rh61908.patch Patch0030: %{name}-fedora-uname-getrlimit.patch Patch0031: %{name}-fedora-__libc_multiple_libcs.patch Patch0033: %{name}-fedora-elf-ORIGIN.patch Patch0034: %{name}-fedora-elf-init-hidden_undef.patch # Needs to be sent upstream. # Support mangling and demangling null pointers. Patch0037: %{name}-rh952799.patch # rtkaio and c_stubs. Note that despite the numbering, these are always # applied first. Patch0038: %{name}-rtkaio.patch Patch0039: %{name}-c_stubs.patch # Remove non-ELF support in rtkaio Patch0040: %{name}-rh731833-rtkaio.patch Patch0041: %{name}-rh731833-rtkaio-2.patch Patch0042: %{name}-rh970865.patch # ARM: Accept that some objects marked hard ABI are now not because of a # binutils bug. Patch0044: %{name}-rh1009145.patch # Allow applications to call pthread_atfork without libpthread.so. Patch0046: %{name}-rh1013801.patch Patch0047: %{name}-nscd-sysconfig.patch # Allow up to 32 libraries to use static TLS. Should go upstream after # more testing. Patch0050: %{name}-rh1124987.patch # Disable rwlock elision if --enable-lock-elision is not used. Patch0052: %{name}-disable-rwlock-elision.patch # confstr _CS_PATH should only return /usr/bin on Fedora since /bin is just a # symlink to it. Patch0053: %{name}-cs-path.patch # Remove the clock_* functions and use the ones in libc like librt does. Patch0054: %{name}-rtkaio-clock.patch ############################################################################## # # Patches from upstream # ############################################################################## # BZ #17949 - Fix __memcpy_chk on non-SSE2 CPUs. Patch1000: glibc-swbz17949.patch #Unicode 7.0.0 update. Patch1001: glibc-rh1191059.patch # BZ #18643 - Missing IPV6_* defines Patch1002: glibc-rh1241061.patch ############################################################################## # # Patches submitted, but not yet approved upstream. # ############################################################################## # # Each should be associated with a BZ. # Obviously we're not there right now, but that's the goal # # http://sourceware.org/ml/libc-alpha/2012-12/msg00103.html Patch2007: %{name}-rh697421.patch Patch2011: %{name}-rh757881.patch Patch2013: %{name}-rh741105.patch # Upstream BZ 14247 Patch2023: %{name}-rh827510.patch # Upstream BZ 13028 Patch2026: %{name}-rh841787.patch # Upstream BZ 14185 Patch2027: %{name}-rh819430.patch Patch2031: %{name}-rh1070416.patch Patch2033: %{name}-aarch64-tls-fixes.patch Patch2034: %{name}-aarch64-workaround-nzcv-clobber-in-tlsdesc.patch ############################################################################## # End of glibc patches. ############################################################################## ############################################################################## # Continued list of core "glibc" package information: ############################################################################## Buildroot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) Obsoletes: glibc-profile < 2.4 Obsoletes: nss_db Provides: ldconfig # The dynamic linker supports DT_GNU_HASH Provides: rtld(GNU_HASH) # This is a short term need until everything is rebuilt in the ARM world # to use the new dynamic linker path %ifarch armv7hl armv7hnl Provides: ld-linux.so.3 Provides: ld-linux.so.3(GLIBC_2.4) %endif Requires: glibc-common = %{version}-%{release} # Require libgcc in case some program calls pthread_cancel in its %%post Requires(pre): basesystem, libgcc # This is for building auxiliary programs like memusage, nscd # For initial glibc bootstraps it can be commented out BuildRequires: gd-devel libpng-devel zlib-devel texinfo, libselinux-devel >= 1.33.4-3 BuildRequires: audit-libs-devel >= 1.1.3, sed >= 3.95, libcap-devel, gettext, nss-devel BuildRequires: /bin/ps, /bin/kill, /bin/awk BuildRequires: systemtap-sdt-devel %if 0%{?run_valgrind_tests} BuildRequires: /usr/bin/valgrind %endif # We use systemd rpm macros for nscd BuildRequires: systemd # This is to ensure that __frame_state_for is exported by glibc # will be compatible with egcs 1.x.y BuildRequires: gcc >= 3.2 %define enablekernel 2.6.32 Conflicts: kernel < %{enablekernel} %define target %{_target_cpu}-redhat-linux %ifarch %{arm} %define target %{_target_cpu}-redhat-linuxeabi %endif %ifarch %{power64} %ifarch ppc64le %define target ppc64le-redhat-linux %else %define target ppc64-redhat-linux %endif %endif %ifarch %{multiarcharches} # Need STT_IFUNC support %ifarch ppc %{power64} BuildRequires: binutils >= 2.20.51.0.2 Conflicts: binutils < 2.20.51.0.2 %else %ifarch s390 s390x # Needed for STT_GNU_IFUNC support for s390/390x BuildRequires: binutils >= 2.23.52.0.1-8 Conflicts: binutils < 2.23.52.0.1-8 %else # Default to this version BuildRequires: binutils >= 2.19.51.0.10 Conflicts: binutils < 2.19.51.0.10 %endif %endif # Earlier releases have broken support for IRELATIVE relocations Conflicts: prelink < 0.4.2 %else # Need AS_NEEDED directive # Need --hash-style=* support BuildRequires: binutils >= 2.17.50.0.2-5 %endif BuildRequires: gcc >= 3.2.1-5 %ifarch ppc s390 s390x BuildRequires: gcc >= 4.1.0-0.17 %endif %if 0%{?_enable_debug_packages} BuildRequires: elfutils >= 0.72 BuildRequires: rpm >= 4.2-0.56 %endif # The testsuite builds static C++ binaries that require a static # C++ runtime from libstdc++-static. BuildRequires: libstdc++-static # Filter out all GLIBC_PRIVATE symbols since they are internal to # the package and should not be examined by any other tool. %global __filter_GLIBC_PRIVATE 1 %description The glibc package contains standard libraries which are used by multiple programs on the system. In order to save disk space and memory, as well as to make upgrading easier, common system code is kept in one place and shared between programs. This particular package contains the most important sets of shared libraries: the standard C library and the standard math library. Without these two libraries, a Linux system will not function. ############################################################################## # glibc "xen" sub-package ############################################################################## %if %{xenpackage} %package xen Summary: The GNU libc libraries (optimized for running under Xen) Group: System Environment/Libraries Requires: glibc = %{version}-%{release}, glibc-utils = %{version}-%{release} %description xen The standard glibc package is optimized for native kernels and does not perform as well under the Xen hypervisor. This package provides alternative library binaries that will be selected instead when running under Xen. Install glibc-xen if you might run your system under the Xen hypervisor. %endif ############################################################################## # glibc "devel" sub-package ############################################################################## %package devel Summary: Object files for development using standard C libraries. Group: Development/Libraries Requires(pre): /sbin/install-info Requires(pre): %{name}-headers Requires: %{name}-headers = %{version}-%{release} Requires: %{name} = %{version}-%{release} %description devel The glibc-devel package contains the object files necessary for developing programs which use the standard C libraries (which are used by nearly all programs). If you are developing programs which will use the standard C libraries, your system needs to have these standard object files available in order to create the executables. Install glibc-devel if you are going to develop programs which will use the standard C libraries. ############################################################################## # glibc "static" sub-package ############################################################################## %package static Summary: C library static libraries for -static linking. Group: Development/Libraries Requires: %{name}-devel = %{version}-%{release} %description static The glibc-static package contains the C library static libraries for -static linking. You don't need these, unless you link statically, which is highly discouraged. ############################################################################## # glibc "headers" sub-package ############################################################################## %package headers Summary: Header files for development using standard C libraries. Group: Development/Libraries Provides: %{name}-headers(%{_target_cpu}) %ifarch x86_64 # If both -m32 and -m64 is to be supported on AMD64, x86_64 glibc-headers # have to be installed, not i586 ones. Obsoletes: %{name}-headers(i586) Obsoletes: %{name}-headers(i686) %endif Requires(pre): kernel-headers Requires: kernel-headers >= 2.2.1, %{name} = %{version}-%{release} BuildRequires: kernel-headers >= 2.6.22 %description headers The glibc-headers package contains the header files necessary for developing programs which use the standard C libraries (which are used by nearly all programs). If you are developing programs which will use the standard C libraries, your system needs to have these standard header files available in order to create the executables. Install glibc-headers if you are going to develop programs which will use the standard C libraries. ############################################################################## # glibc "common" sub-package ############################################################################## %package common Summary: Common binaries and locale data for glibc Requires: %{name} = %{version}-%{release} Requires: tzdata >= 2003a Group: System Environment/Base %description common The glibc-common package includes common binaries for the GNU libc libraries, as well as national language (locale) support. ############################################################################## # glibc "nscd" sub-package ############################################################################## %package -n nscd Summary: A Name Service Caching Daemon (nscd). Group: System Environment/Daemons Requires: %{name} = %{version}-%{release} Requires: libselinux >= 1.17.10-1, audit-libs >= 1.1.3 Requires(pre): /usr/sbin/useradd, coreutils Requires(post): systemd Requires(preun): systemd Requires(postun): systemd, /usr/sbin/userdel %description -n nscd Nscd caches name service lookups and can dramatically improve performance with NIS+, and may help with DNS as well. ############################################################################## # glibc "utils" sub-package ############################################################################## %package utils Summary: Development utilities from GNU C library Group: Development/Tools Requires: %{name} = %{version}-%{release} %description utils The glibc-utils package contains memusage, a memory usage profiler, mtrace, a memory leak tracer and xtrace, a function call tracer which can be helpful during program debugging. If unsure if you need this, don't install this package. ############################################################################## # glibc core "debuginfo" sub-package ############################################################################## %if 0%{?_enable_debug_packages} %define debug_package %{nil} %define __debug_install_post %{nil} %global __debug_package 1 %package debuginfo Summary: Debug information for package %{name} Group: Development/Debug AutoReqProv: no %ifarch %{debuginfocommonarches} Requires: glibc-debuginfo-common = %{version}-%{release} %else %ifarch %{ix86} %{sparc} Obsoletes: glibc-debuginfo-common %endif %endif %description debuginfo This package provides debug information for package %{name}. Debug information is useful when developing applications that use this package or when debugging this package. This package also contains static standard C libraries with debugging information. You need this only if you want to step into C library routines during debugging programs statically linked against one or more of the standard C libraries. To use this debugging information, you need to link binaries with -static -L%{_prefix}/lib/debug%{_libdir} compiler options. ############################################################################## # glibc common "debuginfo-common" sub-package ############################################################################## %ifarch %{debuginfocommonarches} %package debuginfo-common Summary: Debug information for package %{name} Group: Development/Debug AutoReqProv: no %description debuginfo-common This package provides debug information for package %{name}. Debug information is useful when developing applications that use this package or when debugging this package. %endif # %{debuginfocommonarches} %endif # 0%{?_enable_debug_packages} ############################################################################## # Prepare for the build. ############################################################################## %prep %setup -q -n %{glibcsrcdir} # Patch order is important as some patches depend on other patches and # therefore the order must not be changed. First two are rtkaio and c_stubs; # we maintain this only in Fedora. %patch0038 -p1 %patch0039 -p1 %patch0001 -p1 %patch0003 -p1 %patch0004 -p1 %patch0005 -p1 %patch0006 -p1 %patch2007 -p1 %patch0009 -p1 %patch2011 -p1 %patch0012 -p1 %patch2013 -p1 %patch0014 -p1 %patch0015 -p1 %patch0016 -p1 %patch0019 -p1 %patch0020 -p1 %patch2023 -p1 %patch0024 -p1 %patch0025 -p1 %patch2026 -p1 %patch2027 -p1 %patch0028 -p1 %patch0030 -p1 %patch0031 -p1 %patch0033 -p1 %patch0034 -p1 %patch0037 -p1 %patch0040 -p1 %patch0041 -p1 %patch0042 -p1 %patch0044 -p1 %patch0046 -p1 %patch2031 -p1 %patch0047 -p1 %patch2033 -p1 %patch2034 -p1 %patch0050 -p1 %patch0052 -p1 %patch0053 -p1 %patch0054 -p1 %patch1000 -p1 %patch1001 -p1 %patch1002 -p1 ############################################################################## # %%prep - Additional prep required... ############################################################################## # XXX: This sounds entirely out of date, particularly in light of the fact # that we want to be building newer Power support. We should review this # and potentially remove this workaround. However it will require # determining which arches we support building for on our distributions. # ~~~ # On powerpc32, hp timing is only available in power4/power6 # libs, not in base, so pre-power4 dynamic linker is incompatible # with power6 libs. # ~~~ %if %{buildpower6} rm -f sysdeps/powerpc/powerpc32/power4/hp-timing.[ch] %endif # Remove all files generated from patching. find . -type f -size 0 -o -name "*.orig" -exec rm -f {} \; # Ensure timestamps on configure files are current to prevent # regenerating them. touch `find . -name configure` # Ensure *-kw.h files are current to prevent regenerating them. touch locale/programs/*-kw.h ############################################################################## # Build glibc... ############################################################################## %build # We build using the native system compilers. GCC=gcc GXX=g++ ############################################################################## # %%build - x86 options. ############################################################################## # On x86 we build for the specific target cpu rpm is using. %ifarch %{ix86} BuildFlags="-march=%{_target_cpu} -mtune=generic" %endif # We don't support building for i386. The generic i386 architecture lacks the # atomic primitives required for NPTL support. However, when a user asks to # build for i386 we interpret that as "for whatever works on x86" and we # select i686. Thus we treat i386 as an alias for i686. %ifarch i386 i686 BuildFlags="-march=i686 -mtune=generic" %endif %ifarch i486 i586 BuildFlags="$BuildFlags -mno-tls-direct-seg-refs" %endif %ifarch x86_64 BuildFlags="-mtune=generic" %endif ############################################################################## # %%build - SPARC options. ############################################################################## %ifarch sparc BuildFlags="-fcall-used-g6" GCC="gcc -m32" GXX="g++ -m32" %endif %ifarch sparcv9 BuildFlags="-mcpu=ultrasparc -fcall-used-g6" GCC="gcc -m32" GXX="g++ -m32" %endif %ifarch sparcv9v BuildFlags="-mcpu=niagara -fcall-used-g6" GCC="gcc -m32" GXX="g++ -m32" %endif %ifarch sparc64 BuildFlags="-mcpu=ultrasparc -mvis -fcall-used-g6" GCC="gcc -m64" GXX="g++ -m64" %endif %ifarch sparc64v BuildFlags="-mcpu=niagara -mvis -fcall-used-g6" GCC="gcc -m64" GXX="g++ -m64" %endif %ifarch %{power64} BuildFlags="" GCC="gcc -m64" GXX="g++ -m64" %endif ############################################################################## # %%build - Generic options. ############################################################################## BuildFlags="$BuildFlags -fasynchronous-unwind-tables" # Add -DNDEBUG unless using a prerelease case %{version} in *.*.9[0-9]*) ;; *) BuildFlags="$BuildFlags -DNDEBUG" ;; esac EnableKernel="--enable-kernel=%{enablekernel}" # Save the used compiler and options into the file "Gcc" for use later # by %%install. echo "$GCC" > Gcc AddOns=`echo */configure | sed -e 's!/configure!!g;s!\(linuxthreads\|nptl\|rtkaio\|powerpc-cpu\)\( \|$\)!!g;s! \+$!!;s! !,!g;s!^!,!;/^,\*$/d'` %ifarch %{rtkaioarches} AddOns=,rtkaio$AddOns %endif ############################################################################## # build() # Build glibc in `build-%{target}$1', passing the rest of the arguments # as CFLAGS to the build (not the same as configure CFLAGS). Several # global values are used to determine build flags, add-ons, kernel # version, multiarch support, system tap support, etc. ############################################################################## build() { builddir=build-%{target}${1:+-$1} ${1+shift} rm -rf $builddir mkdir $builddir pushd $builddir build_CFLAGS="$BuildFlags -g -O3 $*" # Some configure checks can spuriously fail for some architectures if # unwind info is present configure_CFLAGS="$build_CFLAGS -fno-asynchronous-unwind-tables" ../configure CC="$GCC" CXX="$GXX" CFLAGS="$configure_CFLAGS" \ --prefix=%{_prefix} \ --enable-add-ons=$AddOns \ --with-headers=%{_prefix}/include $EnableKernel --enable-bind-now \ --build=%{target} \ %ifarch %{multiarcharches} --enable-multi-arch \ %endif --enable-obsolete-rpc \ --enable-systemtap \ %ifarch ppc64p7 --with-cpu=power7 \ %endif %ifarch %{lock_elision_arches} --enable-lock-elision \ %endif %if 0%{?disable_werror} --disable-werror \ %endif --disable-profile --enable-nss-crypt || { cat config.log; false; } make %{?_smp_mflags} -r CFLAGS="$build_CFLAGS" %{silentrules} popd } ############################################################################## # Build glibc for the default set of options. ############################################################################## build ############################################################################## # Build glibc for xen: # If we support xen build glibc again for xen support. ############################################################################## %if %{buildxen} build nosegneg -mno-tls-direct-seg-refs %endif ############################################################################## # Build glibc for power6: # If we support building a power6 alternate runtime then built glibc again for # power6. # XXX: We build in a sub-shell for no apparent reason. ############################################################################## %if %{buildpower6} ( platform=`LD_SHOW_AUXV=1 /bin/true | sed -n 's/^AT_PLATFORM:[[:blank:]]*//p'` if [ "$platform" != power6 ]; then mkdir -p power6emul/{lib,lib64} $GCC -shared -O2 -fpic -o power6emul/%{_lib}/power6emul.so %{SOURCE8} -Wl,-z,initfirst %ifarch ppc gcc -shared -nostdlib -O2 -fpic -m64 -o power6emul/lib64/power6emul.so -xc - $RPM_BUILD_ROOT/etc/ld.so.conf truncate -s 0 $RPM_BUILD_ROOT/etc/ld.so.cache chmod 644 $RPM_BUILD_ROOT/etc/ld.so.conf mkdir -p $RPM_BUILD_ROOT/etc/ld.so.conf.d %ifnarch %{auxarches} mkdir -p $RPM_BUILD_ROOT/etc/sysconfig truncate -s 0 $RPM_BUILD_ROOT/etc/sysconfig/nscd truncate -s 0 $RPM_BUILD_ROOT/etc/gai.conf %endif # Include %{_libdir}/gconv/gconv-modules.cache truncate -s 0 $RPM_BUILD_ROOT%{_libdir}/gconv/gconv-modules.cache chmod 644 $RPM_BUILD_ROOT%{_libdir}/gconv/gconv-modules.cache ############################################################################## # Misc... ############################################################################## # NPTL is not usable outside of glibc, so include # the generic one (#162634) cp -a bits/stdio-lock.h $RPM_BUILD_ROOT%{_prefix}/include/bits/stdio-lock.h # And needs sanitizing as well. cp -a %{SOURCE3} $RPM_BUILD_ROOT%{_prefix}/include/bits/libc-lock.h # XXX: What is this for? ln -sf libbsd-compat.a $RPM_BUILD_ROOT%{_libdir}/libbsd.a # Install the upgrade program install -m 700 build-%{target}/glibc_post_upgrade.%{_target_cpu} \ $RPM_BUILD_ROOT%{_prefix}/sbin/glibc_post_upgrade.%{_target_cpu} # Strip all of the installed object files. strip -g $RPM_BUILD_ROOT%{_libdir}/*.o # XXX: Ugly hack for buggy rpm. What bug? BZ? Is this fixed? ln -f ${RPM_BUILD_ROOT}%{_sbindir}/iconvconfig{,.%{_target_cpu}} ############################################################################## # Install debug copies of unstripped static libraries # - This step must be last in order to capture any additional static # archives we might have added. ############################################################################## # If we are building a debug package then copy all of the static archives # into the debug directory to keep them as unstripped copies. %if 0%{?_enable_debug_packages} mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/debug%{_libdir} cp -a $RPM_BUILD_ROOT%{_libdir}/*.a \ $RPM_BUILD_ROOT%{_prefix}/lib/debug%{_libdir}/ rm -f $RPM_BUILD_ROOT%{_prefix}/lib/debug%{_libdir}/*_p.a %endif ############################################################################## # Build the file lists used for describing the package and subpackages. ############################################################################## # There are 11 file lists: # * rpm.fileslist # - Master file list. Eventually, after removing files from this list # we are left with the list of files for the glibc package. # * common.filelist # - Contains the list of flies for the common subpackage. # * utils.filelist # - Contains the list of files for the utils subpackage. # * nscd.filelist # - Contains the list of files for the nscd subpackage. # * devel.filelist # - Contains the list of files for the devel subpackage. # * headers.filelist # - Contains the list of files for the headers subpackage. # * static.filelist # - Contains the list of files for the static subpackage. # * nosegneg.filelist # - Contains the list of files for the xen subpackage. # * debuginfo.filelist # - Contains the list of files for the glibc debuginfo package. # * debuginfocommon.filelist # - Contains the list of files for the glibc common debuginfo package. # { find $RPM_BUILD_ROOT \( -type f -o -type l \) \ \( \ -name etc -printf "%%%%config " -o \ -name gconv-modules \ -printf "%%%%verify(not md5 size mtime) %%%%config(noreplace) " -o \ -name gconv-modules.cache \ -printf "%%%%verify(not md5 size mtime) " \ , \ ! -path "*/lib/debug/*" -printf "/%%P\n" \) # Print all directories with a %%dir prefix. We omit the info directory and # all directories in (and including) /usr/share/locale. find $RPM_BUILD_ROOT -type d \ \( -path '*%{_prefix}/share/locale' -prune -o \ \( -path '*%{_prefix}/share/*' ! -path '*%{_infodir}' -o \ -path "*%{_prefix}/include/*" \ \) -printf "%%%%dir /%%P\n" \) } | { # primary filelist # Add %%lang entries for language-specific locale files. This allows users # to set %%_install_lang and not install the unnecessary locale files. I18N_LANG='s|.*/share/i18n/locales/\([a-z]\{2\}[a-z]\?\)_[A-Z]\{2\}.*|%lang(\1) &|' # Remove the *.mo entries. We will add that using %%find_lang sed -e '\,.*/share/locale/\([^/_]\+\).*/LC_MESSAGES/.*\.mo,d' \ -e "$I18N_LANG" \ -e '\,/etc/\(localtime\|nsswitch.conf\|ld\.so\.conf\|ld\.so\.cache\|default\|rpc\|gai\.conf\),d' \ -e '\,/%{_lib}/lib\(pcprofile\|memusage\)\.so,d' \ -e '\,bin/\(memusage\|mtrace\|xtrace\|pcprofiledump\),d' } | sort > rpm.filelist # Our *.mo files. Put them in glibc-common. %find_lang libc mv libc.lang common.filelist mkdir -p $RPM_BUILD_ROOT%{_libdir} mv -f $RPM_BUILD_ROOT/%{_lib}/lib{pcprofile,memusage}.so $RPM_BUILD_ROOT%{_libdir} # The xtrace and memusage scripts have hard-coded paths that need to be # translated to a correct set of paths using the $LIB token which is # dynamically translated by ld.so as the default lib directory. for i in $RPM_BUILD_ROOT%{_prefix}/bin/{xtrace,memusage}; do sed -e 's~=/%{_lib}/libpcprofile.so~=%{_libdir}/libpcprofile.so~' \ -e 's~=/%{_lib}/libmemusage.so~=%{_libdir}/libmemusage.so~' \ -e 's~='\''/\\\$LIB/libpcprofile.so~='\''%{_prefix}/\\$LIB/libpcprofile.so~' \ -e 's~='\''/\\\$LIB/libmemusage.so~='\''%{_prefix}/\\$LIB/libmemusage.so~' \ -i $i done # Put the info files into the devel file list. grep '%{_infodir}' < rpm.filelist | grep -v '%{_infodir}/dir' > devel.filelist # Put the stub headers into the devel file list. grep '%{_prefix}/include/gnu/stubs-[^.]\+\.h' < rpm.filelist >> devel.filelist || : # Put the include files into headers file list. grep '%{_prefix}/include' < rpm.filelist | egrep -v '%{_prefix}/include/(linuxthreads|gnu/stubs-[^.]+\.h)' \ > headers.filelist # Remove partial (lib*_p.a) static libraries, include files, and info files from # the core glibc package. sed -i -e '\|%{_libdir}/lib.*_p.a|d' \ -e '\|%{_prefix}/include|d' \ -e '\|%{_infodir}|d' rpm.filelist # Put some static files into the devel package. grep '%{_libdir}/lib.*\.a' < rpm.filelist \ | grep '/lib\(\(c\|pthread\|nldbl\)_nonshared\|bsd\(\|-compat\)\|g\|ieee\|mcheck\|rpcsvc\)\.a$' \ >> devel.filelist # Put the rest of the static files into the static package. grep '%{_libdir}/lib.*\.a' < rpm.filelist \ | grep -v '/lib\(\(c\|pthread\|nldbl\)_nonshared\|bsd\(\|-compat\)\|g\|ieee\|mcheck\|rpcsvc\)\.a$' \ > static.filelist # Put all of the object files and *.so (not the versioned ones) into the # devel package. grep '%{_libdir}/.*\.o' < rpm.filelist >> devel.filelist grep '%{_libdir}/lib.*\.so' < rpm.filelist >> devel.filelist # Remove all of the static, object, unversioned DSOs, old linuxthreads stuff, # and nscd from the core glibc package. sed -i -e '\|%{_libdir}/lib.*\.a|d' \ -e '\|%{_libdir}/.*\.o|d' \ -e '\|%{_libdir}/lib.*\.so|d' \ -e '\|%{_libdir}/linuxthreads|d' \ -e '\|nscd|d' rpm.filelist # All of the bin and certain sbin files go into the common package. # We explicitly exclude certain sbin files that need to go into # the core glibc package for use during upgrades. grep '%{_prefix}/bin' < rpm.filelist >> common.filelist grep '%{_prefix}/sbin/[^gi]' < rpm.filelist >> common.filelist # All of the files under share go into the common package since # they should be multilib-independent. grep '%{_prefix}/share' < rpm.filelist | \ grep -v -e '%{_prefix}/share/zoneinfo' -e '%%dir %{prefix}/share' \ >> common.filelist # Remove the bin, locale, some sbin, and share from the # core glibc package. We cheat a bit and use the slightly dangerous # /usr/sbin/[^gi] to match the inverse of the search that put the # files into common.filelist. It's dangerous in that additional files # that start with g, or i would get put into common.filelist and # rpm.filelist. sed -i -e '\|%{_prefix}/bin|d' \ -e '\|%{_prefix}/lib/locale|d' \ -e '\|%{_prefix}/sbin/[^gi]|d' \ -e '\|%{_prefix}/share|d' rpm.filelist ############################################################################## # Build the xen package file list (nosegneg.filelist) ############################################################################## truncate -s 0 nosegneg.filelist %if %{xenpackage} grep '/%{_lib}/%{nosegneg_subdir}' < rpm.filelist >> nosegneg.filelist sed -i -e '\|/%{_lib}/%{nosegneg_subdir}|d' rpm.filelist # TODO: There are files in the nosegneg list which should be in the devel # pacakge, but we leave them instead in the xen subpackage. We may # wish to clean that up at some point. %endif # Add the binary to build localse to the common subpackage. echo '%{_prefix}/sbin/build-locale-archive' >> common.filelist # The nscd binary must go into the nscd subpackage. echo '%{_prefix}/sbin/nscd' > nscd.filelist # The memusage and pcprofile libraries are put back into the core # glibc package even though they are only used by utils package # scripts.. cat >> rpm.filelist < utils.filelist < debuginfocommon.sources %ifarch %{biarcharches} # Add the source files to the core debuginfo package. cat debuginfocommon.sources >> debuginfo.filelist %else %ifarch %{ix86} %define basearch i686 %endif %ifarch sparc sparcv9 %define basearch sparc %endif # The auxarches get only these few source files. auxarches_debugsources=\ '/(generic|linux|%{basearch}|nptl(_db)?)/|/%{glibcsrcdir}/build|/dl-osinfo\.h' # Place the source files into the core debuginfo pakcage. egrep "$auxarches_debugsources" debuginfocommon.sources >> debuginfo.filelist # Remove the source files from the common debuginfo package. egrep -v "$auxarches_debugsources" \ debuginfocommon.sources >> debuginfocommon.filelist %endif # %{biarcharches} # Add the list of *.a archives in the debug directory to # the common debuginfo package. list_debug_archives >> debuginfocommon.filelist # It happens that find-debuginfo.sh produces duplicate entries even # though the inputs are unique. Therefore we sort and unique the # entries in the debug file lists. This avoids the following warnings: # ~~~ # Processing files: glibc-debuginfo-common-2.17.90-10.fc20.x86_64 # warning: File listed twice: /usr/lib/debug/usr/sbin/build-locale-archive.debug # warning: File listed twice: /usr/lib/debug/usr/sbin/nscd.debug # warning: File listed twice: /usr/lib/debug/usr/sbin/zdump.debug # warning: File listed twice: /usr/lib/debug/usr/sbin/zic.debug # ~~~ sort -u debuginfocommon.filelist > debuginfocommon2.filelist mv debuginfocommon2.filelist debuginfocommon.filelist %endif # %{debuginfocommonarches} # Remove any duplicates output by a buggy find-debuginfo.sh. sort -u debuginfo.filelist > debuginfo2.filelist mv debuginfo2.filelist debuginfo.filelist # Remove some common directories from the common package debuginfo so that we # don't end up owning them. exclude_common_dirs() { exclude_dirs="%{_prefix}/src/debug" exclude_dirs="$exclude_dirs $(echo %{_prefix}/lib/debug{,/%{_lib},/bin,/sbin})" exclude_dirs="$exclude_dirs $(echo %{_prefix}/lib/debug%{_prefix}{,/%{_lib},/libexec,/bin,/sbin})" for d in $(echo $exclude_dirs | sed 's/ /\n/g'); do sed -i "\|^%%dir $d/\?$|d" $1 done } %ifarch %{debuginfocommonarches} exclude_common_dirs debuginfocommon.filelist %endif exclude_common_dirs debuginfo.filelist %endif # 0%{?_enable_debug_packages} # Remove the `dir' info-heirarchy file which will be maintained # by the system as it adds info files to the install. rm -f $RPM_BUILD_ROOT%{_infodir}/dir %ifarch %{auxarches} # Delete files that we do not intended to ship with the auxarch. echo Cutting down the list of unpackaged files sed -e '/%%dir/d;/%%config/d;/%%verify/d;s/%%lang([^)]*) //;s#^/*##' \ common.filelist devel.filelist static.filelist headers.filelist \ utils.filelist nscd.filelist \ %ifarch %{debuginfocommonarches} debuginfocommon.filelist \ %endif | (cd $RPM_BUILD_ROOT; xargs --no-run-if-empty rm -f 2> /dev/null || :) %else mkdir -p $RPM_BUILD_ROOT/var/{db,run}/nscd touch $RPM_BUILD_ROOT/var/{db,run}/nscd/{passwd,group,hosts,services} touch $RPM_BUILD_ROOT/var/run/nscd/{socket,nscd.pid} %endif # %{auxarches} %ifnarch %{auxarches} truncate -s 0 $RPM_BUILD_ROOT/%{_prefix}/lib/locale/locale-archive %endif mkdir -p $RPM_BUILD_ROOT/var/cache/ldconfig truncate -s 0 $RPM_BUILD_ROOT/var/cache/ldconfig/aux-cache ############################################################################## # Run the glibc testsuite ############################################################################## %check %if %{run_glibc_tests} # Run the glibc tests. If any tests fail to build we exit %check with an error # of 1, otherwise we print the test failure list and the failed test output # and exit with 0. In the future we want to compare against a baseline and # exit with 1 if the results deviate from the baseline. run_tests () { truncate -s 0 check.log tail -f check.log & tailpid=$! # Run the make a sub-shell (to avoid %check failing if make fails) # but capture the status for use later. We use the normal sub-shell # trick of printing the status. The actual result of the sub-shell # is the successful execution of the echo. status=$(set +e make %{?_smp_mflags} check %{silentrules} > check.log 2>&1 status=$? echo $status) # Wait for the tail to catch up with the output and then kill it. sleep 10 kill $tailpid # Print the header, so we can find it, but skip the error printing # if there aren't any failrues. echo ===================FAILED TESTS===================== if [ $status -ne 0 ]; then # We are not running with `-k`, therefore a test build failure # terminates the test run and that terminates %check with an # error which terminates the build. We want this behaviour to # ensure that all tests build, and all tests run. # If the test result summary is not present it means one of # tests failed to build. if ! grep 'Summary of test results:' check.log; then echo "FAIL: Some glibc tests failed to build." exit 1 fi # Print out information about all of the failed tests. grep -e ^FAIL -e ^ERROR tests.sum \ | awk '{print $2}' \ | while read testcase; do echo "$testcase" cat $testcase.out echo ------------------------- done fi } # Increase timeouts export TIMEOUTFACTOR=16 parent=$$ echo ====================TESTING========================= ############################################################################## # - Test the default runtime. ############################################################################## pushd build-%{target} run_tests popd ############################################################################## # - Test the xen runtimes (nosegneg). ############################################################################## %if %{buildxen} echo ====================TESTING -mno-tls-direct-seg-refs============= pushd build-%{target}-nosegneg run_tests popd %endif ############################################################################## # - Test the power6 runtimes. ############################################################################## %if %{buildpower6} echo ====================TESTING -mcpu=power6============= pushd build-%{target}-power6 if [ -d ../power6emul ]; then export LD_PRELOAD=`cd ../power6emul; pwd`/\$LIB/power6emul.so fi run_tests popd %endif echo ====================TESTING DETAILS================= for i in `sed -n 's|^.*\*\*\* \[\([^]]*\.out\)\].*$|\1|p' build-*-linux*/check.log`; do echo =====$i===== cat $i || : echo ============ done echo ====================TESTING END===================== PLTCMD='/^Relocation section .*\(\.rela\?\.plt\|\.rela\.IA_64\.pltoff\)/,/^$/p' echo ====================PLT RELOCS LD.SO================ readelf -Wr $RPM_BUILD_ROOT/%{_lib}/ld-*.so | sed -n -e "$PLTCMD" echo ====================PLT RELOCS LIBC.SO============== readelf -Wr $RPM_BUILD_ROOT/%{_lib}/libc-*.so | sed -n -e "$PLTCMD" echo ====================PLT RELOCS END================== %if 0%{?run_valgrind_tests} # Finally, check if valgrind runs with the new glibc. # We want to fail building if valgrind is not able to run with this glibc so # that we can then coordinate with valgrind to get it fixed before we update # glibc. pushd build-%{target} elf/ld.so --library-path .:elf:nptl:dlfcn /usr/bin/valgrind \ elf/ld.so --library-path .:elf:nptl:dlfcn /usr/bin/true popd %endif %endif # %{run_glibc_tests} %pre -p -- Check that the running kernel is new enough required = '%{enablekernel}' rel = posix.uname("%r") if rpm.vercmp(rel, required) < 0 then error("FATAL: kernel too old", 0) end %post -p %{_prefix}/sbin/glibc_post_upgrade.%{_target_cpu} %postun -p /sbin/ldconfig %triggerin common -p -- glibc if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then pid = posix.fork() if pid == 0 then posix.exec("%{_prefix}/sbin/build-locale-archive", "--install-langs", rpm.expand("%%{_install_langs}")) elseif pid > 0 then posix.wait(pid) end end %post common -p if posix.access("/etc/ld.so.cache") then if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then pid = posix.fork() if pid == 0 then posix.exec("%{_prefix}/sbin/build-locale-archive", "--install-langs", rpm.expand("%%{_install_langs}")) elseif pid > 0 then posix.wait(pid) end end end %post devel /sbin/install-info %{_infodir}/libc.info.gz %{_infodir}/dir > /dev/null 2>&1 || : %pre headers # this used to be a link and it is causing nightmares now if [ -L %{_prefix}/include/scsi ] ; then rm -f %{_prefix}/include/scsi fi %preun devel if [ "$1" = 0 ]; then /sbin/install-info --delete %{_infodir}/libc.info.gz %{_infodir}/dir > /dev/null 2>&1 || : fi %post utils -p /sbin/ldconfig %postun utils -p /sbin/ldconfig %pre -n nscd getent group nscd >/dev/null || /usr/sbin/groupadd -g 28 -r nscd getent passwd nscd >/dev/null || /usr/sbin/useradd -M -o -r -d / -s /sbin/nologin \ -c "NSCD Daemon" -u 28 -g nscd nscd %post -n nscd %systemd_post nscd.service %preun -n nscd %systemd_preun nscd.service %postun -n nscd if test $1 = 0; then /usr/sbin/userdel nscd > /dev/null 2>&1 || : fi %systemd_postun_with_restart nscd.service %if %{xenpackage} %post xen -p /sbin/ldconfig %postun xen -p /sbin/ldconfig %endif %clean rm -rf "$RPM_BUILD_ROOT" rm -f *.filelist* %files -f rpm.filelist %defattr(-,root,root) %dir %{_prefix}/%{_lib}/audit %ifarch %{rtkaioarches} %dir /%{_lib}/rtkaio %endif %if %{buildxen} && !%{xenpackage} %dir /%{_lib}/%{nosegneg_subdir_base} %dir /%{_lib}/%{nosegneg_subdir} %ifarch %{rtkaioarches} %dir /%{_lib}/rtkaio/%{nosegneg_subdir_base} %dir /%{_lib}/rtkaio/%{nosegneg_subdir} %endif %endif %if %{buildpower6} %dir /%{_lib}/power6 %dir /%{_lib}/power6x %ifarch %{rtkaioarches} %dir /%{_lib}/rtkaio/power6 %dir /%{_lib}/rtkaio/power6x %endif %endif %ifarch s390x /lib/ld64.so.1 %endif %ifarch armv7hl armv7hnl /lib/ld-linux.so.3 %endif %verify(not md5 size mtime) %config(noreplace) /etc/nsswitch.conf %verify(not md5 size mtime) %config(noreplace) /etc/ld.so.conf %verify(not md5 size mtime) %config(noreplace) /etc/rpc %dir /etc/ld.so.conf.d %dir %{_prefix}/libexec/getconf %dir %{_libdir}/gconv %dir %attr(0700,root,root) /var/cache/ldconfig %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/cache/ldconfig/aux-cache %attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/ld.so.cache %attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/gai.conf %doc README NEWS INSTALL BUGS PROJECTS CONFORMANCE elf/rtld-debugger-interface.txt %{!?_licensedir:%global license %%doc} %license COPYING COPYING.LIB LICENSES localedata/unicode-gen/unicode-license.txt %doc hesiod/README.hesiod %if %{xenpackage} %files -f nosegneg.filelist xen %defattr(-,root,root) %dir /%{_lib}/%{nosegneg_subdir_base} %dir /%{_lib}/%{nosegneg_subdir} %endif %ifnarch %{auxarches} %files -f common.filelist common %defattr(-,root,root) %dir %{_prefix}/lib/locale %attr(0644,root,root) %verify(not md5 size mtime) %{_prefix}/lib/locale/locale-archive.tmpl %attr(0644,root,root) %verify(not md5 size mtime mode) %ghost %config(missingok,noreplace) %{_prefix}/lib/locale/locale-archive %dir %attr(755,root,root) /etc/default %verify(not md5 size mtime) %config(noreplace) /etc/default/nss %doc documentation/* %files -f devel.filelist devel %defattr(-,root,root) %files -f static.filelist static %defattr(-,root,root) %files -f headers.filelist headers %defattr(-,root,root) %files -f utils.filelist utils %defattr(-,root,root) %files -f nscd.filelist -n nscd %defattr(-,root,root) %config(noreplace) /etc/nscd.conf %dir %attr(0755,root,root) /var/run/nscd %dir %attr(0755,root,root) /var/db/nscd /lib/systemd/system/nscd.service /lib/systemd/system/nscd.socket %{_tmpfilesdir}/nscd.conf %attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/nscd.pid %attr(0666,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/socket %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/passwd %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/group %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/hosts %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/services %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/passwd %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/group %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/hosts %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/services %ghost %config(missingok,noreplace) /etc/sysconfig/nscd %endif %if 0%{?_enable_debug_packages} %files debuginfo -f debuginfo.filelist %defattr(-,root,root) %ifarch %{debuginfocommonarches} %ifnarch %{auxarches} %files debuginfo-common -f debuginfocommon.filelist %defattr(-,root,root) %endif %endif %endif %changelog * Wed Sep 16 2015 Mike FABIAN - 2.22-8 - build-locale-archive sometimes created empty archives (fixed by David Shea) (#1262040) * Wed Jul 8 2015 Carlos O'Donell - 2.21-7 - Add missing IPV6 defines for Advanced API (RFC3542) (1) (#1241061). * Tue Mar 24 2015 Siddhesh Poyarekar - 2.21-6 - Support installing only those locales specified by the RPM macro %%_install_langs (#1204827). - Use rpm.expand in scripts to reduce set of required RPM features. * Mon Feb 23 2015 Alexandre Oliva - 2.21-5 - Update __STDC_ISO_10646__ following Unicode 7.0.0 update. * Mon Feb 23 2015 Siddhesh Poyarekar - 2.21-4 - Unicode 7.0.0 update (#1191059). - Add back x86 vDSO support. - Fix rtkaio build to reference clock_* functions from libc. - Fix missing clock_* IFUNCs in librtkaio. * Tue Feb 17 2015 Carlos O'Donell - 2.21-3 - Change patch file to avoid rpm bug 1193603 and rebuild with new NVR (#1190454). * Tue Feb 17 2015 Carlos O'Donell - 2.21-2 - Rebuild with new NVR. * Wed Feb 11 2015 Carlos O'Donell - 2.21-1 - Fix __memcpy_chk on non-SSE2 CPUs (Upstream BZ #17949) - Rebase to upstream release 2.21 to provide ABI and API assurances. * Wed Jan 21 2015 Siddhesh Poyarekar - 2.20.90-20 - Sync with upstream master. - Disable werror on s390x. - Revert x86 vDSO support since it breaks i686 rtkaio build. * Tue Jan 20 2015 Peter Robinson 2.20.90-19 - Drop large ancient ChangeLogs (rhbz #1169546) * Mon Jan 12 2015 Siddhesh Poyarekar - 2.20.90-18 - Pass address of main_arena.mutex to mutex_lock/unlock. * Thu Jan 08 2015 Siddhesh Poyarekar - 2.20.90-17 - Define a __tls_get_addr macro to avoid a conflicting declaration. * Wed Jan 07 2015 Siddhesh Poyarekar - 2.20.90-16 - Disable -Werror for s390 as well. * Wed Jan 07 2015 Siddhesh Poyarekar - 2.20.90-14 - Sync with upstream master. - Disable -Werror on powerpc and armv7hl. - Temporarily disable valgrind test on ppc64. * Sun Dec 28 2014 Dan Horák - valgrind available only on selected arches (missing on s390) * Wed Dec 10 2014 Kyle McMartin - aarch64: Drop strchrnul.S revert, apply fix from Richard Earnshaw. * Fri Dec 05 2014 Carlos O'Donell - 2.20.90-13 - Fix permission of debuginfo source files to allow multiarch debuginfo packages to be installed and upgraded. * Fri Dec 05 2014 Siddhesh Poyarekar - 2.20.90-12 - Remove LIB_LANG since we don't install locales in /usr/lib/locale anymore. - Don't own any directories in /usr/share/locale (#1167445). - Use the %%find_lang macro to get the *.mo files (#1167445). - Add %%lang tags to language locale files in /usr/share/i18n/locale (#1169044). * Wed Dec 03 2014 Kyle McMartin - 2.20.90-11 - aarch64: revert optimized strchrnul.S implementation (rhbz#1167501) until it can be debugged. * Fri Nov 28 2014 Carlos O'Donell - 2.20.90-10 - Auto-sync with upstream master. * Wed Nov 19 2014 Carlos O'Donell - 2.20.90-9 - Sync with upstream master. * Wed Nov 05 2014 Siddhesh Poyarekar - 2.20.90-8 - Make getconf return only /usr/bin (#1138835). - Sync with upstream master. * Tue Nov 04 2014 Arjun Shankar - 2.20.90-7 - Add patch that modifies several tests to use test-skeleton.c. The patch is accepted but not yet committed upstream. https://sourceware.org/ml/libc-alpha/2014-10/msg00744.html * Tue Sep 30 2014 Siddhesh Poyarekar - 2.20.90-6 - Sync with upstream master. - Disable more Intel TSX usage in rwlocks (#1146967). - Enable lock elision again on s390 and s390x. - Enable Systemtap SDT probes for all architectures (#985109). * Fri Sep 26 2014 Carlos O'Donell - 2.20.90-5 - Disable lock elision support for Intel hardware until microcode updates can be done in early bootup (#1146967). - Fix building test tst-strtod-round for ARM. * Tue Sep 23 2014 Siddhesh Poyarekar - 2.20.90-4 - Sync with upstream master. - Don't own the common debuginfo directories (#1144853). - Run valgrind in the %%check section to ensure that it does not break. * Tue Sep 16 2014 Siddhesh Poyarekar - 2.20.90-3 - Sync with upstream master. - Revert patch for #737223. * Mon Sep 08 2014 Siddhesh Poyarekar - 2.20.90-2 - Build build-locale-archive statically again. * Mon Sep 08 2014 Siddhesh Poyarekar - 2.20.90-1 - Sync with upstream master. * Thu Sep 4 2014 Carlos O'Donell - 2.19.90-36 - Allow up to 32 dlopened modules to use static TLS (#1124987). - Run glibc tests in %%check section of RPM spec file. - Do not run tests with `-k` and fail if any test fails to build. * Tue Aug 26 2014 Siddhesh Poyarekar - 2.19.90-35 - Sync with upstream master. - Use INTERNAL_SYSCALL in TLS_INIT_TP (#1133134). - Remove gconv loadable module transliteration support (CVE-2014-5119, #1119128). * Fri Aug 22 2014 Dennis Gilmore - 2.19.90-34 - add back sss to nsswitch.conf we have added workarounds in the tools * Thu Aug 21 2014 Kevin Fenzi - 2.19.90-33.1 - Rebuild for rpm bug 1131960 * Tue Aug 19 2014 Dennis Gilmore - 2.19.90-33 - remove sss from default nsswitch.conf it causes issues with live image composing * Wed Aug 13 2014 Siddhesh Poyarekar - 2.19.90-32 - Auto-sync with upstream master. - Revert to only defining __extern_always_inline for g++-4.3+. - Fix build failure in compat-gcc-32 (#186410). * Mon Jul 28 2014 Siddhesh Poyarekar - 2.19.90-31 - Auto-sync with upstream master. * Wed Jul 23 2014 Siddhesh Poyarekar - 2.19.90-30 - Undo last master sync to fix up rawhide. * Tue Jul 15 2014 Siddhesh Poyarekar - 2.19.90-29 - Auto-sync with upstream master. * Sat Jul 12 2014 Tom Callaway - 2.19.90-28 - fix license handling * Mon Jul 07 2014 Siddhesh Poyarekar - 2.19.90-27 - Auto-sync with upstream master. * Fri Jul 04 2014 Siddhesh Poyarekar - 2.19.90-26 - Sync with upstream roland/nptl branch. - Improve testsuite failure outputs in build.log * Thu Jul 03 2014 Siddhesh Poyarekar - 2.19.90-25 - Sync with upstream roland/nptl branch. * Wed Jul 02 2014 Siddhesh Poyarekar - 2.19.90-24 - Sync with upstream master. * Tue Jun 24 2014 Siddhesh Poyarekar - 2.19.90-23 - Sync with upstream master. - Add fix to unbreak i386 ABI breakage due to a change in scalbn. * Fri Jun 20 2014 Kyle McMartin - 2.19.90-22 - AArch64: Save & restore NZCV (flags) upon entry to _dl_tlsdesc_dynamic in order to work around GCC reordering compares across the TLS descriptor sequence (GCC PR61545.) Committing a (temporary) fix here allows us to avoid rebuilding the world with gcc 4.9.0-11.fc21. * Mon Jun 16 2014 Kyle McMartin - 2.19.90-21 - Auto-sync with upstream master. * Thu Jun 12 2014 Siddhesh Poyarekar - 2.19.90-20 - Auto-sync with upstream master. * Sat Jun 07 2014 Fedora Release Engineering - 2.19.90-19.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Tue Jun 03 2014 Siddhesh Poyarekar - 2.19.90-19 - Sync with upstream master. * Mon May 26 2014 Siddhesh Poyarekar - 2.19.90-18 - Sync with upstream master. - Adjust rtkaio patches to build with upstream master. * Wed May 21 2014 Kyle McMartin - 2.19.90-17 - Backport some upstream-wards patches to fix TLS issues on AArch64. * Wed May 21 2014 Kyle McMartin - 2.19.90-16 - AArch64: Fix handling of nocancel syscall failures (#1098327) * Thu May 15 2014 Siddhesh Poyarekar - 2.19.90-15 - Sync with upstream master. * Wed May 14 2014 Carlos O'Donell - 2.19.90-14 - Add support for displaying all test results in build logs. * Wed May 14 2014 Carlos O'Donell - 2.19.90-13 - Add initial support for ppc64le. * Tue Apr 29 2014 Siddhesh Poyarekar - 2.19.90-12 - Auto-sync with upstream master. - Remove ports addon. * Fri Apr 18 2014 Siddhesh Poyarekar - 2.19.90-11 - Sync with upstream master. * Thu Apr 10 2014 Siddhesh Poyarekar - 2.19.90-10 - Sync with upstream master. * Thu Apr 03 2014 Siddhesh Poyarekar - 2.19.90-9 - Sync with upstream master. * Wed Mar 26 2014 Siddhesh Poyarekar - 2.19.90-8 - Sync with upstream master. * Wed Mar 19 2014 Siddhesh Poyarekar - 2.19.90-7 - Sync with upstream master. - Fix offset computation for append+ mode on switching from read (#1078355). * Wed Mar 12 2014 Carlos O'Donell - 2.19.90-6 - Sync with upstream master. - Use cleaner upstream solution for -ftree-loop-distribute-patterns (#911307). * Tue Mar 04 2014 Siddhesh Poyarekar - 2.19.90-5 - Sync with upstream master. * Thu Feb 27 2014 Siddhesh Poyarekar - 2.19.90-4 - Use nscd service files from glibc sources. - Make nscd service forking in systemd service file. * Tue Feb 25 2014 Siddhesh Poyarekar - 2.19.90-3 - Sync with upstream master. - Separate ftell from fseek logic and avoid modifying FILE data (#1069559). * Mon Feb 24 2014 Carlos O'Donell - 2.19.90-2 - Fix build-locale-archive failure to open default template. * Tue Feb 18 2014 Siddhesh Poyarekar - 2.19.90-1 - Sync with upstream master. * Tue Feb 04 2014 Siddhesh Poyarekar - 2.18.90-27 - Sync with upstream master. * Wed Jan 29 2014 Siddhesh Poyarekar - 2.18.90-26 - Modify regular expressions to include powerpcle stubs-*.h (#1058258). * Wed Jan 29 2014 Siddhesh Poyarekar - 2.18.90-25 - Sync with upstream master. * Sat Jan 25 2014 Ville Skyttä - 2.18.90-24 - Own the %%{_prefix}/lib/locale dir. * Thu Jan 23 2014 Siddhesh Poyarekar - 2.18.90-23 - Sync with upstream master. * Thu Jan 16 2014 Siddhesh Poyarekar - 2.18.90-22 - Back out ftell test case (#1052846). * Tue Jan 14 2014 Siddhesh Poyarekar - 2.18.90-21 - Sync with upstream master. - Fix infinite loop in ftell when writing wide char data (#1052846). * Tue Jan 7 2014 Siddhesh Poyarekar - 2.18.90-20 - Sync with upstream master. - Enable systemtap probes on Power and S/390.