gdb/gdb-bz592031-siginfo-lost-4of5.patch
Jan Kratochvil b0e03f562d - Rebase to FSF GDB 7.2.50.20110117 (which is a 7.3 pre-release).
- Fix callback-mode readline-6.0 regression for CTRL-C (for RHEL-6.0).
  - Fix occasional NULL dereference of the readline-6.0 workaround (BZ 575516).
2011-01-17 16:31:43 +01:00

993 lines
30 KiB
Diff

http://sourceware.org/ml/gdb-patches/2010-09/msg00360.html
Subject: [patch 3/4]#3 linux-nat: Do not respawn signals
Hi,
linux-nat.c is fixed to never respawn signals; possibly keeping SIGSTOP
pending, as is done in current in FSF gdbserver and as suggested by Pedro:
http://sourceware.org/ml/gdb-patches/2010-08/msg00544.html
The last linux-nat.c removed patch chunk comes from the initial implementation
by Mark Kettenis:
[PATCH] New Linux threads support
http://sourceware.org/ml/gdb-patches/2000-09/msg00020.html
92280a75e017683bf8e4f339f4f85640b0700509
It gets in part reimplemented into the new stop_wait_callback <if (lp->step)>
part and partially just not needed as currently GDB never drops the signals as
it does not PTRACE_CONT the thread; signal is kept for processing:
"RC: Not resuming sibling %s (has pending)\n"
In stop_wait_callback I believe breakpoints cancellation is not needed here,
it would be done later.
The testcase sigstep-threads.exp was written to catch a regression-like
appearance then the new <if (lp->step)> part of stop_wait_callback gets
removed. Still the tecase fails even with FSF HEAD:
32 var++; /* step-1 */
(gdb) step
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
31 { /* step-0 */
There is no reason why it shouldn't stop on line 33, between line 32 and line
33 no signal would occur. Stepping of the current thread should not be
affected by whatever happens in the other threads as select_event_lwp has:
/* Give preference to any LWP that is being single-stepped. */
There is a problem that with FSF HEAD GDB does PTRACE_SINGLESTEP for thread A,
PTRACE_CONT for thread B (because of set scheduler-locking off), thread B hits
SIGUSR1, so GDB tkills thread A with SIGSTOP and it can receive SIGSTOP for
thread A before the SIGTRAP for completed PTRACE_SINGLESTEP. At that moment
select_event_lwp. forgets it was stepping thread A because there is no pending
SIGTRAP event. currently_stepping still remembers thread A was stepping so it
will later stop but as thread A was PTRACE_CONT-ed in the meantime it is too
late.
There is the new <if (lp->step)> part of stop_wait_callback to always track
thread A is stepping. Due to different scheduling without this part the
changed GDB would very rarely stop in this testcase otherwise, making it look
as a regression.
I have some another patch I may post separately as if multiple signals happen
besides SIGTRAP GDB still may switch from thread A away (as not considering it
stepping) to thread B for SIGUSR and accidentally PTRACE_CONT thread A.
But I do not find this as a prerequisite for this patchset.
Thanks,
Jan
gdb/
2010-09-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (stop_wait_callback): New gdb_assert. Remove signals
respawning; keep TP with SIGNALLED. New debugging message "SWC:
Delayed SIGSTOP caught for %s.". Catch next signal if SIGSTOP has
been caught and LP->STEP is set.
(linux_nat_wait_1) <lp && lp->signalled>: Remove.
gdb/testsuite/
2010-09-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/siginfo-threads.exp: New file.
* gdb.threads/siginfo-threads.c: New file.
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Index: gdb-7.2.50.20110117/gdb/linux-nat.c
===================================================================
--- gdb-7.2.50.20110117.orig/gdb/linux-nat.c 2011-01-17 15:53:14.000000000 +0100
+++ gdb-7.2.50.20110117/gdb/linux-nat.c 2011-01-17 16:05:57.000000000 +0100
@@ -2803,6 +2803,8 @@ stop_wait_callback (struct lwp_info *lp,
{
int status;
+ gdb_assert (lp->resumed);
+
status = wait_lwp (lp);
if (status == 0)
return 0;
@@ -2828,110 +2830,61 @@ stop_wait_callback (struct lwp_info *lp,
if (WSTOPSIG (status) != SIGSTOP)
{
- if (linux_nat_status_is_event (status))
- {
- /* If a LWP other than the LWP that we're reporting an
- event for has hit a GDB breakpoint (as opposed to
- some random trap signal), then just arrange for it to
- hit it again later. We don't keep the SIGTRAP status
- and don't forward the SIGTRAP signal to the LWP. We
- will handle the current event, eventually we will
- resume all LWPs, and this one will get its breakpoint
- trap again.
-
- If we do not do this, then we run the risk that the
- user will delete or disable the breakpoint, but the
- thread will have already tripped on it. */
-
- /* Save the trap's siginfo in case we need it later. */
- save_siginfo (lp);
-
- save_sigtrap (lp);
-
- /* Now resume this LWP and get the SIGSTOP event. */
- errno = 0;
- ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0, 0);
- if (debug_linux_nat)
- {
- fprintf_unfiltered (gdb_stdlog,
- "PTRACE_CONT %s, 0, 0 (%s)\n",
- target_pid_to_str (lp->ptid),
- errno ? safe_strerror (errno) : "OK");
-
- fprintf_unfiltered (gdb_stdlog,
- "SWC: Candidate SIGTRAP event in %s\n",
- target_pid_to_str (lp->ptid));
- }
- /* Hold this event/waitstatus while we check to see if
- there are any more (we still want to get that SIGSTOP). */
- stop_wait_callback (lp, NULL);
+ /* The thread was stopped with a signal other than SIGSTOP. */
- /* Hold the SIGTRAP for handling by linux_nat_wait. If
- there's another event, throw it back into the
- queue. */
- if (lp->status)
- {
- if (debug_linux_nat)
- fprintf_unfiltered (gdb_stdlog,
- "SWC: kill %s, %s\n",
- target_pid_to_str (lp->ptid),
- status_to_str ((int) status));
- kill_lwp (GET_LWP (lp->ptid), WSTOPSIG (lp->status));
- }
+ /* Save the trap's siginfo in case we need it later. */
+ save_siginfo (lp);
- /* Save the sigtrap event. */
- lp->status = status;
- return 0;
- }
- else
- {
- /* The thread was stopped with a signal other than
- SIGSTOP, and didn't accidentally trip a breakpoint. */
+ save_sigtrap (lp);
- if (debug_linux_nat)
- {
- fprintf_unfiltered (gdb_stdlog,
- "SWC: Pending event %s in %s\n",
- status_to_str ((int) status),
- target_pid_to_str (lp->ptid));
- }
- /* Now resume this LWP and get the SIGSTOP event. */
- errno = 0;
- ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0, 0);
- if (debug_linux_nat)
- fprintf_unfiltered (gdb_stdlog,
- "SWC: PTRACE_CONT %s, 0, 0 (%s)\n",
- target_pid_to_str (lp->ptid),
- errno ? safe_strerror (errno) : "OK");
-
- /* Hold this event/waitstatus while we check to see if
- there are any more (we still want to get that SIGSTOP). */
- stop_wait_callback (lp, NULL);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: Pending event %s in %s\n",
+ status_to_str ((int) status),
+ target_pid_to_str (lp->ptid));
- /* If the lp->status field is still empty, use it to
- hold this event. If not, then this event must be
- returned to the event queue of the LWP. */
- if (lp->status)
- {
- if (debug_linux_nat)
- {
- fprintf_unfiltered (gdb_stdlog,
- "SWC: kill %s, %s\n",
- target_pid_to_str (lp->ptid),
- status_to_str ((int) status));
- }
- kill_lwp (GET_LWP (lp->ptid), WSTOPSIG (status));
- }
- else
- lp->status = status;
- return 0;
- }
+ /* Save the sigtrap event. */
+ lp->status = status;
+ gdb_assert (! lp->stopped);
+ gdb_assert (lp->signalled);
+ lp->stopped = 1;
}
else
{
/* We caught the SIGSTOP that we intended to catch, so
there's no SIGSTOP pending. */
- lp->stopped = 1;
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: Delayed SIGSTOP caught for %s.\n",
+ target_pid_to_str (lp->ptid));
+
+ if (lp->step)
+ {
+ /* LP->STATUS is 0 here. That means SIGTRAP from
+ PTRACE_SINGLESTEP still has to be delivered for this inferior
+ stop. Catching the SIGTRAP event is important to prevent
+ starvation in select_event_lwp. */
+
+ registers_changed ();
+ linux_ops->to_resume (linux_ops, pid_to_ptid (GET_LWP (lp->ptid)),
+ 1, TARGET_SIGNAL_0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: %s %s, 0, 0 (discard SIGSTOP)\n",
+ "PTRACE_SINGLESTEP",
+ target_pid_to_str (lp->ptid));
+
+ lp->stopped = 0;
+ gdb_assert (lp->resumed);
+ stop_wait_callback (lp, NULL);
+ gdb_assert (lp->stopped);
+ }
+ else
+ lp->stopped = 1;
+
+ /* Reset SIGNALLED only after the stop_wait_callback call above as
+ it does gdb_assert on SIGNALLED. */
lp->signalled = 0;
}
}
@@ -3514,52 +3467,6 @@ retry:
lp = NULL;
}
- if (lp && lp->signalled)
- {
- /* A pending SIGSTOP may interfere with the normal stream of
- events. In a typical case where interference is a problem,
- we have a SIGSTOP signal pending for LWP A while
- single-stepping it, encounter an event in LWP B, and take the
- pending SIGSTOP while trying to stop LWP A. After processing
- the event in LWP B, LWP A is continued, and we'll never see
- the SIGTRAP associated with the last time we were
- single-stepping LWP A. */
-
- /* Resume the thread. It should halt immediately returning the
- pending SIGSTOP. */
- registers_changed ();
- linux_ops->to_resume (linux_ops, pid_to_ptid (GET_LWP (lp->ptid)),
- lp->step, TARGET_SIGNAL_0);
- if (debug_linux_nat)
- fprintf_unfiltered (gdb_stdlog,
- "LLW: %s %s, 0, 0 (expect SIGSTOP)\n",
- lp->step ? "PTRACE_SINGLESTEP" : "PTRACE_CONT",
- target_pid_to_str (lp->ptid));
- lp->stopped = 0;
- gdb_assert (lp->resumed);
-
- /* Catch the pending SIGSTOP. */
- status = lp->status;
- lp->status = 0;
-
- stop_wait_callback (lp, NULL);
-
- /* If the lp->status field isn't empty, we caught another signal
- while flushing the SIGSTOP. Return it back to the event
- queue of the LWP, as we already have an event to handle. */
- if (lp->status)
- {
- if (debug_linux_nat)
- fprintf_unfiltered (gdb_stdlog,
- "LLW: kill %s, %s\n",
- target_pid_to_str (lp->ptid),
- status_to_str (lp->status));
- kill_lwp (GET_LWP (lp->ptid), WSTOPSIG (lp->status));
- }
-
- lp->status = status;
- }
-
if (!target_can_async_p ())
{
/* Causes SIGINT to be passed on to the attached process. */
Index: gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/siginfo-threads.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/siginfo-threads.c 2011-01-17 16:02:40.000000000 +0100
@@ -0,0 +1,447 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2010 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#define _GNU_SOURCE
+#include <pthread.h>
+#include <stdio.h>
+#include <limits.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <sys/types.h>
+#include <signal.h>
+#include <unistd.h>
+#include <asm/unistd.h>
+
+#define gettid() syscall (__NR_gettid)
+#define tgkill(tgid, tid, sig) syscall (__NR_tgkill, tgid, tid, sig)
+
+/* Terminate always in the main task, it can lock up with SIGSTOPped GDB
+ otherwise. */
+#define TIMEOUT (gettid () == getpid() ? 10 : 15)
+
+static pid_t thread1_tid;
+static pthread_cond_t thread1_tid_cond = PTHREAD_COND_INITIALIZER;
+static pthread_mutex_t thread1_tid_mutex = PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP;
+static int thread1_sigusr1_hit;
+static int thread1_sigusr2_hit;
+
+static pid_t thread2_tid;
+static pthread_cond_t thread2_tid_cond = PTHREAD_COND_INITIALIZER;
+static pthread_mutex_t thread2_tid_mutex = PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP;
+static int thread2_sigusr1_hit;
+static int thread2_sigusr2_hit;
+
+static pthread_mutex_t terminate_mutex = PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP;
+
+/* Do not use alarm as it would create a ptrace event which would hang up us if
+ we are being traced by GDB which we stopped ourselves. */
+
+static void timed_mutex_lock (pthread_mutex_t *mutex)
+{
+ int i;
+ struct timespec start, now;
+
+ i = clock_gettime (CLOCK_MONOTONIC, &start);
+ assert (i == 0);
+
+ do
+ {
+ i = pthread_mutex_trylock (mutex);
+ if (i == 0)
+ return;
+ assert (i == EBUSY);
+
+ i = clock_gettime (CLOCK_MONOTONIC, &now);
+ assert (i == 0);
+ assert (now.tv_sec >= start.tv_sec);
+ }
+ while (now.tv_sec - start.tv_sec < TIMEOUT);
+
+ fprintf (stderr, "Timed out waiting for internal lock!\n");
+ exit (EXIT_FAILURE);
+}
+
+static void
+handler (int signo, siginfo_t *siginfo, void *exception)
+{
+ int *varp;
+
+ assert (siginfo->si_signo == signo);
+ assert (siginfo->si_code == SI_TKILL);
+ assert (siginfo->si_pid == getpid ());
+
+ if (gettid () == thread1_tid)
+ {
+ if (signo == SIGUSR1)
+ varp = &thread1_sigusr1_hit;
+ else if (signo == SIGUSR2)
+ varp = &thread1_sigusr2_hit;
+ else
+ assert (0);
+ }
+ else if (gettid () == thread2_tid)
+ {
+ if (signo == SIGUSR1)
+ varp = &thread2_sigusr1_hit;
+ else if (signo == SIGUSR2)
+ varp = &thread2_sigusr2_hit;
+ else
+ assert (0);
+ }
+ else
+ assert (0);
+
+ if (*varp)
+ {
+ fprintf (stderr, "Signal %d for TID %lu has been already hit!\n", signo,
+ (unsigned long) gettid ());
+ exit (EXIT_FAILURE);
+ }
+ *varp = 1;
+}
+
+static void *
+thread1_func (void *unused)
+{
+ int i;
+
+ timed_mutex_lock (&thread1_tid_mutex);
+
+ /* THREAD1_TID_MUTEX must be already locked to avoid race. */
+ thread1_tid = gettid ();
+
+ i = pthread_cond_signal (&thread1_tid_cond);
+ assert (i == 0);
+ i = pthread_mutex_unlock (&thread1_tid_mutex);
+ assert (i == 0);
+
+ /* Be sure the "t (tracing stop)" test can proceed for both threads. */
+ timed_mutex_lock (&terminate_mutex);
+ i = pthread_mutex_unlock (&terminate_mutex);
+ assert (i == 0);
+
+ if (! thread1_sigusr1_hit)
+ {
+ fprintf (stderr, "Thread 1 signal SIGUSR1 not hit!\n");
+ exit (EXIT_FAILURE);
+ }
+ if (! thread1_sigusr2_hit)
+ {
+ fprintf (stderr, "Thread 1 signal SIGUSR2 not hit!\n");
+ exit (EXIT_FAILURE);
+ }
+
+ return NULL;
+}
+
+static void *
+thread2_func (void *unused)
+{
+ int i;
+
+ timed_mutex_lock (&thread2_tid_mutex);
+
+ /* THREAD2_TID_MUTEX must be already locked to avoid race. */
+ thread2_tid = gettid ();
+
+ i = pthread_cond_signal (&thread2_tid_cond);
+ assert (i == 0);
+ i = pthread_mutex_unlock (&thread2_tid_mutex);
+ assert (i == 0);
+
+ /* Be sure the "t (tracing stop)" test can proceed for both threads. */
+ timed_mutex_lock (&terminate_mutex);
+ i = pthread_mutex_unlock (&terminate_mutex);
+ assert (i == 0);
+
+ if (! thread2_sigusr1_hit)
+ {
+ fprintf (stderr, "Thread 2 signal SIGUSR1 not hit!\n");
+ exit (EXIT_FAILURE);
+ }
+ if (! thread2_sigusr2_hit)
+ {
+ fprintf (stderr, "Thread 2 signal SIGUSR2 not hit!\n");
+ exit (EXIT_FAILURE);
+ }
+
+ return NULL;
+}
+
+static const char *
+proc_string (const char *filename, const char *line)
+{
+ FILE *f;
+ static char buf[LINE_MAX];
+ size_t line_len = strlen (line);
+
+ f = fopen (filename, "r");
+ if (f == NULL)
+ {
+ fprintf (stderr, "fopen (\"%s\") for \"%s\": %s\n", filename, line,
+ strerror (errno));
+ exit (EXIT_FAILURE);
+ }
+ while (errno = 0, fgets (buf, sizeof (buf), f))
+ {
+ char *s;
+
+ s = strchr (buf, '\n');
+ assert (s != NULL);
+ *s = 0;
+
+ if (strncmp (buf, line, line_len) != 0)
+ continue;
+
+ if (fclose (f))
+ {
+ fprintf (stderr, "fclose (\"%s\") for \"%s\": %s\n", filename, line,
+ strerror (errno));
+ exit (EXIT_FAILURE);
+ }
+
+ return &buf[line_len];
+ }
+ if (errno != 0)
+ {
+ fprintf (stderr, "fgets (\"%s\": %s\n", filename, strerror (errno));
+ exit (EXIT_FAILURE);
+ }
+ fprintf (stderr, "\"%s\": No line \"%s\" found.\n", filename, line);
+ exit (EXIT_FAILURE);
+}
+
+static unsigned long
+proc_ulong (const char *filename, const char *line)
+{
+ const char *s = proc_string (filename, line);
+ long retval;
+ char *end;
+
+ errno = 0;
+ retval = strtol (s, &end, 10);
+ if (retval < 0 || retval >= LONG_MAX || (end && *end))
+ {
+ fprintf (stderr, "\"%s\":\"%s\": %ld, %s\n", filename, line, retval,
+ strerror (errno));
+ exit (EXIT_FAILURE);
+ }
+ return retval;
+}
+
+static void
+state_wait (pid_t process, const char *wanted)
+{
+ char *filename;
+ int i;
+ struct timespec start, now;
+ const char *state;
+
+ i = asprintf (&filename, "/proc/%lu/status", (unsigned long) process);
+ assert (i > 0);
+
+ i = clock_gettime (CLOCK_MONOTONIC, &start);
+ assert (i == 0);
+
+ do
+ {
+ state = proc_string (filename, "State:\t");
+
+ /* torvalds/linux-2.6.git 464763cf1c6df632dccc8f2f4c7e50163154a2c0
+ has changed "T (tracing stop)" to "t (tracing stop)". Make the GDB
+ testcase backward compatible with older Linux kernels. */
+ if (strcmp (state, "T (tracing stop)") == 0)
+ state = "t (tracing stop)";
+
+ if (strcmp (state, wanted) == 0)
+ {
+ free (filename);
+ return;
+ }
+
+ if (sched_yield ())
+ {
+ perror ("sched_yield()");
+ exit (EXIT_FAILURE);
+ }
+
+ i = clock_gettime (CLOCK_MONOTONIC, &now);
+ assert (i == 0);
+ assert (now.tv_sec >= start.tv_sec);
+ }
+ while (now.tv_sec - start.tv_sec < TIMEOUT);
+
+ fprintf (stderr, "Timed out waiting for PID %lu \"%s\" (now it is \"%s\")!\n",
+ (unsigned long) process, wanted, state);
+ exit (EXIT_FAILURE);
+}
+
+static volatile pid_t tracer = 0;
+static pthread_t thread1, thread2;
+
+static void
+cleanup (void)
+{
+ printf ("Resuming GDB PID %lu.\n", (unsigned long) tracer);
+
+ if (tracer)
+ {
+ int i;
+ int tracer_save = tracer;
+
+ tracer = 0;
+
+ i = kill (tracer_save, SIGCONT);
+ assert (i == 0);
+ }
+}
+
+int
+main (int argc, char **argv)
+{
+ int i;
+ int standalone = 0;
+ struct sigaction act;
+
+ if (argc == 2 && strcmp (argv[1], "-s") == 0)
+ standalone = 1;
+ else
+ assert (argc == 1);
+
+ setbuf (stdout, NULL);
+
+ timed_mutex_lock (&thread1_tid_mutex);
+ timed_mutex_lock (&thread2_tid_mutex);
+
+ timed_mutex_lock (&terminate_mutex);
+
+ errno = 0;
+ memset (&act, 0, sizeof (act));
+ act.sa_sigaction = handler;
+ act.sa_flags = SA_RESTART | SA_SIGINFO;
+ i = sigemptyset (&act.sa_mask);
+ assert_perror (errno);
+ assert (i == 0);
+ i = sigaction (SIGUSR1, &act, NULL);
+ assert_perror (errno);
+ assert (i == 0);
+ i = sigaction (SIGUSR2, &act, NULL);
+ assert_perror (errno);
+ assert (i == 0);
+
+ i = pthread_create (&thread1, NULL, thread1_func, NULL);
+ assert (i == 0);
+
+ i = pthread_create (&thread2, NULL, thread2_func, NULL);
+ assert (i == 0);
+
+ if (!standalone)
+ {
+ tracer = proc_ulong ("/proc/self/status", "TracerPid:\t");
+ if (tracer == 0)
+ {
+ fprintf (stderr, "The testcase must be run by GDB!\n");
+ exit (EXIT_FAILURE);
+ }
+ if (tracer != getppid ())
+ {
+ fprintf (stderr, "The testcase parent must be our GDB tracer!\n");
+ exit (EXIT_FAILURE);
+ }
+ }
+
+ /* SIGCONT our debugger in the case of our crash as we would deadlock
+ otherwise. */
+
+ atexit (cleanup);
+
+ printf ("Stopping GDB PID %lu.\n", (unsigned long) tracer);
+
+ if (tracer)
+ {
+ i = kill (tracer, SIGSTOP);
+ assert (i == 0);
+ state_wait (tracer, "T (stopped)");
+ }
+
+ /* Threads are now waiting at timed_mutex_lock (thread1_tid_mutex) and so
+ they could not trigger the signals before GDB gets unstopped later.
+ Threads get resumed at pthread_cond_wait below. Use `while' loops for
+ protection against spurious pthread_cond_wait wakeups. */
+
+ printf ("Waiting till the threads initialize their TIDs.\n");
+
+ while (thread1_tid == 0)
+ {
+ i = pthread_cond_wait (&thread1_tid_cond, &thread1_tid_mutex);
+ assert (i == 0);
+ }
+
+ while (thread2_tid == 0)
+ {
+ i = pthread_cond_wait (&thread2_tid_cond, &thread2_tid_mutex);
+ assert (i == 0);
+ }
+
+ printf ("Thread 1 TID = %lu, thread 2 TID = %lu, PID = %lu.\n",
+ (unsigned long) thread1_tid, (unsigned long) thread2_tid,
+ (unsigned long) getpid ());
+
+ errno = 0;
+ i = tgkill (getpid (), thread1_tid, SIGUSR1);
+ assert_perror (errno);
+ assert (i == 0);
+ i = tgkill (getpid (), thread1_tid, SIGUSR2);
+ assert_perror (errno);
+ assert (i == 0);
+ i = tgkill (getpid (), thread2_tid, SIGUSR1);
+ assert_perror (errno);
+ assert (i == 0);
+ i = tgkill (getpid (), thread2_tid, SIGUSR2);
+ assert_perror (errno);
+ assert (i == 0);
+
+ printf ("Waiting till the threads get trapped by the signals.\n");
+
+ if (tracer)
+ {
+ /* s390x-unknown-linux-gnu will fail with "R (running)". */
+
+ state_wait (thread1_tid, "t (tracing stop)");
+
+ state_wait (thread2_tid, "t (tracing stop)");
+ }
+
+ cleanup ();
+
+ printf ("Joining the threads.\n");
+
+ i = pthread_mutex_unlock (&terminate_mutex);
+ assert (i == 0);
+
+ i = pthread_join (thread1, NULL);
+ assert (i == 0);
+
+ i = pthread_join (thread2, NULL);
+ assert (i == 0);
+
+ printf ("Exiting.\n"); /* break-at-exit */
+
+ return EXIT_SUCCESS;
+}
Index: gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/siginfo-threads.exp
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/siginfo-threads.exp 2011-01-17 16:02:40.000000000 +0100
@@ -0,0 +1,94 @@
+# Copyright 2010 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+set testfile "siginfo-threads"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" ${binfile} executable [list debug additional_flags=-lrt]] != "" } {
+ return -1
+}
+
+clean_restart $testfile
+
+if ![runto_main] {
+ return -1
+}
+
+# `nostop noprint pass' could in some cases report false PASS due to the
+# (preempt 'handle') code path.
+
+gdb_test "handle SIGUSR1 stop print pass" "Signal\[ \t\]+Stop\[ \t\]+Print\[ \t\]+Pass to program\[ \t\]+Description\r\nSIGUSR1\[ \t\]+Yes\[ \t\]+Yes\[ \t\]+Yes\[ \t\].*"
+gdb_test "handle SIGUSR2 stop print pass" "Signal\[ \t\]+Stop\[ \t\]+Print\[ \t\]+Pass to program\[ \t\]+Description\r\nSIGUSR2\[ \t\]+Yes\[ \t\]+Yes\[ \t\]+Yes\[ \t\].*"
+
+gdb_breakpoint [gdb_get_line_number "break-at-exit"]
+
+set test "get pid"
+gdb_test_multiple "p getpid ()" $test {
+ -re " = (\[0-9\]+)\r\n$gdb_prompt $" {
+ set pid $expect_out(1,string)
+ pass $test
+ }
+}
+
+for {set sigcount 0} {$sigcount < 4} {incr sigcount} {
+ set test "catch signal $sigcount"
+ set sigusr ""
+ gdb_test_multiple "continue" $test {
+ -re "Program received signal SIGUSR(\[12\]), User defined signal \[12\]\\.\r\n.*\r\n$gdb_prompt $" {
+ set sigusr $expect_out(1,string)
+ pass $test
+ }
+ }
+ if {$sigusr == ""} {
+ return -1
+ }
+
+ set test "signal $sigcount si_signo"
+ if {$sigusr == 1} {
+ set signo 10
+ } else {
+ set signo 12
+ }
+ gdb_test_multiple {p $_siginfo.si_signo} $test {
+ -re " = $signo\r\n$gdb_prompt $" {
+ pass $test
+ }
+ -re "Attempt to extract a component of a value that is not a structure\\.\r\n$gdb_prompt $" {
+ unsupported $test
+ }
+ }
+
+ set test "signal $sigcount si_code is SI_TKILL"
+ gdb_test_multiple {p $_siginfo.si_code} $test {
+ -re " = -6\r\n$gdb_prompt $" {
+ pass $test
+ }
+ -re "Attempt to extract a component of a value that is not a structure\\.\r\n$gdb_prompt $" {
+ unsupported $test
+ }
+ }
+
+ set test "signal $sigcount si_pid"
+ gdb_test_multiple {p $_siginfo._sifields._kill.si_pid} $test {
+ -re " = $pid\r\n$gdb_prompt $" {
+ pass $test
+ }
+ -re "Attempt to extract a component of a value that is not a structure\\.\r\n$gdb_prompt $" {
+ unsupported $test
+ }
+ }
+}
+
+gdb_continue_to_breakpoint break-at-exit ".*break-at-exit.*"
Index: gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/sigstep-threads.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/sigstep-threads.c 2011-01-17 16:02:40.000000000 +0100
@@ -0,0 +1,54 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2010 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include <pthread.h>
+#include <assert.h>
+#include <signal.h>
+
+#include <asm/unistd.h>
+#include <unistd.h>
+#define tgkill(tgid, tid, sig) syscall (__NR_tgkill, (tgid), (tid), (sig))
+#define gettid() syscall (__NR_gettid)
+
+static volatile int var;
+
+static void
+handler (int signo) /* step-0 */
+{ /* step-0 */
+ var++; /* step-1 */
+ tgkill (getpid (), gettid (), SIGUSR1); /* step-2 */
+}
+
+static void *
+start (void *arg)
+{
+ signal (SIGUSR1, handler);
+ tgkill (getpid (), gettid (), SIGUSR1);
+ assert (0);
+
+ return NULL;
+}
+
+int
+main (void)
+{
+ pthread_t thread;
+
+ pthread_create (&thread, NULL, start, NULL);
+ start (NULL); /* main-start */
+ return 0;
+}
Index: gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/sigstep-threads.exp
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ gdb-7.2.50.20110117/gdb/testsuite/gdb.threads/sigstep-threads.exp 2011-01-17 16:02:40.000000000 +0100
@@ -0,0 +1,74 @@
+# Copyright 2010 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+set testfile sigstep-threads
+set srcfile ${testfile}.c
+set executable ${testfile}
+set binfile ${objdir}/${subdir}/${executable}
+
+if { [gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ untested ${testfile}.exp
+ return -1
+}
+
+clean_restart $executable
+
+if ![runto_main] {
+ return -1;
+}
+
+# `noprint' would not test the full logic of GDB.
+gdb_test "handle SIGUSR1 nostop print pass" "\r\nSIGUSR1\[ \t\]+No\[ \t\]+Yes\[ \t\]+Yes\[ \t\].*"
+
+gdb_test_no_output "set scheduler-locking off"
+
+gdb_breakpoint [gdb_get_line_number "step-1"]
+gdb_test_no_output {set $step1=$bpnum}
+gdb_continue_to_breakpoint "step-1" ".* step-1 .*"
+gdb_test_no_output {disable $step1}
+
+# 1 as we are now stopped at the `step-1' label.
+set step_at 1
+for {set i 0} {$i < 100} {incr i} {
+ set test "step $i"
+ # Presume this step failed - as in the case of a timeout.
+ set failed 1
+ gdb_test_multiple "step" $test {
+ -re "\r\nProgram received signal SIGUSR1, User defined signal 1.\r\n" {
+ exp_continue -continue_timer
+ }
+ -re "step-(\[012\]).*\r\n$gdb_prompt $" {
+ set now $expect_out(1,string)
+ if {$step_at == 2 && $now == 1} {
+ set failed 0
+ } elseif {$step_at == 1 && $now == 2} {
+ set failed 0
+ # Continue over the re-signalling back to the handle entry.
+ gdb_test_no_output {enable $step1} ""
+ gdb_test "continue" " step-1 .*" ""
+ set now 1
+ gdb_test_no_output {disable $step1} ""
+ } else {
+ fail $test
+ }
+ set step_at $now
+ }
+ }
+ if $failed {
+ return
+ }
+}
+# We can never reliably say the racy problematic case has been tested.
+pass "step"