rpms
/
gdb
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
gdb/gdb-6.8-ia64-breakpoint-res...

277 lines
11 KiB
Diff
Raw Blame History

gdb/
2008-10-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix automatic restoration of breakpoints memory for ia64.
* ia64-tdep.c (ia64_memory_insert_breakpoint): New comment part for
SHADOW_CONTENTS content. Remova variable instr. New variable cleanup.
Force automatic breakpoints restoration. PLACED_SIZE and SHADOW_LEN
are now set larger, to BUNDLE_LEN - 2.
(ia64_memory_remove_breakpoint): Rename variables bundle to bundle_mem
and instr to instr_saved. New variables bundle_saved and
instr_breakpoint. Comment new reasons why we need to disable automatic
restoration of breakpoints. Assert PLACED_SIZE and SHADOW_LEN. New
check of the original memory content.
(ia64_breakpoint_from_pc): Array breakpoint extended to BUNDLE_LEN.
Sanity check the PCPTR parameter SLOTNUM value. New #if check on
BREAKPOINT_MAX vs. BUNDLE_LEN. Increase LENPTR to BUNDLE_LEN - 2.
gdb/testsuite/
2008-10-28 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/breakpoint-shadow.exp, gdb.base/breakpoint-shadow.c: New.
[ RHEL-5 disable of `set breakpoint always-inserted'. ]
--- ./gdb/ia64-tdep.c 11 Sep 2008 14:23:15 -0000 1.184
+++ ./gdb/ia64-tdep.c 28 Oct 2008 10:28:41 -0000
@@ -545,7 +545,21 @@ fetch_instruction (CORE_ADDR addr, instr
simulators. So I changed the pattern slightly to do "break.i 0x080001"
instead. But that didn't work either (I later found out that this
pattern was used by the simulator that I was using.) So I ended up
- using the pattern seen below. */
+ using the pattern seen below.
+
+ SHADOW_CONTENTS has byte-based addressing (PLACED_ADDRESS and SHADOW_LEN)
+ while we need bit-based addressing as the instructions length is 41 bits and
+ we must not modify/corrupt the adjacent ones in the same bundle.
+ Fortunately we may store larger memory incl. the adjacent bits with the
+ original memory content (not the possibly already stored breakpoints there).
+ We need to be careful in ia64_memory_remove_breakpoint to always restore
+ only the specific bits of this instruction ignoring any adjacent stored
+ bits.
+
+ We use the original addressing with the low nibble 0..2 which gets
+ incorrectly interpreted by the generic GDB code as the byte offset of
+ SHADOW_CONTENTS. We store whole BUNDLE_LEN bytes just without these two
+ possibly skipped bytes. */
#if 0
#define IA64_BREAKPOINT 0x00002000040LL
@@ -559,15 +573,21 @@ ia64_memory_insert_breakpoint (struct gd
CORE_ADDR addr = bp_tgt->placed_address;
char bundle[BUNDLE_LEN];
int slotnum = (int) (addr & 0x0f) / SLOT_MULTIPLIER;
- long long instr;
int val;
int template;
+ struct cleanup *cleanup;
if (slotnum > 2)
error (_("Can't insert breakpoint for slot numbers greater than 2."));
addr &= ~0x0f;
+ /* Enable the automatic memory restoration from breakpoints while
+ we read our instruction bundle. Otherwise, we could store into
+ SHADOW_CONTENTS an already stored breakpoint at the same location.
+ In practice it is already being prevented by the DUPLICATE field and
+ update_global_location_list. */
+ cleanup = make_show_memory_breakpoints_cleanup (0);
val = target_read_memory (addr, bundle, BUNDLE_LEN);
/* Check for L type instruction in 2nd slot, if present then
@@ -578,13 +598,18 @@ ia64_memory_insert_breakpoint (struct gd
slotnum = 2;
}
- instr = slotN_contents (bundle, slotnum);
- memcpy (bp_tgt->shadow_contents, &instr, sizeof (instr));
- bp_tgt->placed_size = bp_tgt->shadow_len = sizeof (instr);
+ /* Slot number 2 may skip at most 2 bytes at the beginning. */
+ bp_tgt->placed_size = bp_tgt->shadow_len = BUNDLE_LEN - 2;
+
+ /* Store the whole bundle, except for the initial skipped bytes by the slot
+ number interpreted as bytes offset in PLACED_ADDRESS. */
+ memcpy (bp_tgt->shadow_contents, bundle + slotnum, bp_tgt->shadow_len);
+
replace_slotN_contents (bundle, IA64_BREAKPOINT, slotnum);
if (val == 0)
- target_write_memory (addr, bundle, BUNDLE_LEN);
+ target_write_memory (addr + slotnum, bundle + slotnum, bp_tgt->shadow_len);
+ do_cleanups (cleanup);
return val;
}
@@ -593,9 +618,9 @@ ia64_memory_remove_breakpoint (struct gd
struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
- char bundle[BUNDLE_LEN];
+ char bundle_mem[BUNDLE_LEN], bundle_saved[BUNDLE_LEN];
int slotnum = (addr & 0x0f) / SLOT_MULTIPLIER;
- long long instr;
+ long long instr_breakpoint, instr_saved;
int val;
int template;
struct cleanup *cleanup;
@@ -604,23 +629,39 @@ ia64_memory_remove_breakpoint (struct gd
/* Disable the automatic memory restoration from breakpoints while
we read our instruction bundle. Otherwise, the general restoration
- mechanism kicks in and ends up corrupting our bundle, because it
- is not aware of the concept of instruction bundles. */
+ mechanism kicks in and we would possibly remove parts of the adjacent
+ placed breakpoints. It is due to our SHADOW_CONTENTS overlapping the real
+ breakpoint instruction bits region. */
cleanup = make_show_memory_breakpoints_cleanup (1);
- val = target_read_memory (addr, bundle, BUNDLE_LEN);
+ val = target_read_memory (addr, bundle_mem, BUNDLE_LEN);
/* Check for L type instruction in 2nd slot, if present then
bump up the slot number to the 3rd slot */
- template = extract_bit_field (bundle, 0, 5);
+ template = extract_bit_field (bundle_mem, 0, 5);
if (slotnum == 1 && template_encoding_table[template][1] == L)
{
slotnum = 2;
}
- memcpy (&instr, bp_tgt->shadow_contents, sizeof instr);
- replace_slotN_contents (bundle, instr, slotnum);
+ gdb_assert (bp_tgt->placed_size == BUNDLE_LEN - 2);
+ gdb_assert (bp_tgt->placed_size == bp_tgt->shadow_len);
+
+ instr_breakpoint = slotN_contents (bundle_mem, slotnum);
+ if (instr_breakpoint != IA64_BREAKPOINT)
+ warning (_("Breakpoint removal cannot find the placed breakpoint at %s"),
+ paddr_nz (bp_tgt->placed_address));
+
+ /* Extract the original saved instruction from SLOTNUM normalizing its
+ bit-shift for INSTR_SAVED. */
+ memcpy (bundle_saved, bundle_mem, BUNDLE_LEN);
+ memcpy (bundle_saved + slotnum, bp_tgt->shadow_contents, bp_tgt->shadow_len);
+ instr_saved = slotN_contents (bundle_saved, slotnum);
+
+ /* In BUNDLE_MEM be careful to modify only the bits belonging to SLOTNUM and
+ never any other possibly also stored in SHADOW_CONTENTS. */
+ replace_slotN_contents (bundle_mem, instr_saved, slotnum);
if (val == 0)
- target_write_memory (addr, bundle, BUNDLE_LEN);
+ target_write_memory (addr, bundle_mem, BUNDLE_LEN);
do_cleanups (cleanup);
return val;
@@ -631,12 +672,18 @@ ia64_memory_remove_breakpoint (struct gd
const unsigned char *
ia64_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr)
{
- static unsigned char breakpoint[] =
- { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- *lenptr = sizeof (breakpoint);
-#if 0
- *pcptr &= ~0x0f;
+ static unsigned char breakpoint[BUNDLE_LEN];
+ int slotnum = (int) (*pcptr & 0x0f) / SLOT_MULTIPLIER;
+
+ if (slotnum > 2)
+ error (_("Can't insert breakpoint for slot numbers greater than 2."));
+
+#if BREAKPOINT_MAX < BUNDLE_LEN
+# error "BREAKPOINT_MAX < BUNDLE_LEN"
#endif
+
+ *lenptr = BUNDLE_LEN - 2;
+
return breakpoint;
}
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ ./gdb/testsuite/gdb.base/breakpoint-shadow.c 28 Oct 2008 10:28:41 -0000
@@ -0,0 +1,27 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2008 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+int
+main (void)
+{
+ volatile int i;
+
+ i = 1; /* break-first */
+ i = 2; /* break-second */
+
+ return 0;
+}
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ ./gdb/testsuite/gdb.base/breakpoint-shadow.exp 28 Oct 2008 10:28:41 -0000
@@ -0,0 +1,65 @@
+# Copyright 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+set testfile breakpoint-shadow
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ untested "Couldn't compile test program"
+ return -1
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# We need to start the inferior to place the breakpoints in the memory at all.
+if { [gdb_start_cmd] < 0 } {
+ untested start
+ return -1
+}
+gdb_test "" "main \\(\\) at .*" "start"
+
+# The default "auto" mode removes all the breakpoints when we stop (and not
+# running the nonstop mode). We would not be able to test the shadow.
+#RHEL-5:
+#gdb_test "set breakpoint always-inserted on"
+#gdb_test "show breakpoint always-inserted" "Always inserted breakpoint mode is on."
+
+set match "\nDump of assembler code for function main:\r\n(.*)End of assembler dump.\r\n$gdb_prompt $"
+
+set test "disassembly without breakpoints"
+gdb_test_multiple "disass main" $test {
+ -re $match {
+ set orig $expect_out(1,string)
+ pass $test
+ }
+}
+
+gdb_test "b [gdb_get_line_number "break-first"]" "Breakpoint \[0-9\] at .*" "First breakpoint placed"
+gdb_test "b [gdb_get_line_number "break-second"]" "Breakpoint \[0-9\] at .*" "Second breakpoint placed"
+
+set test "disassembly with breakpoints"
+gdb_test_multiple "disass main" $test {
+ -re $match {
+ set got $expect_out(1,string)
+ if [string equal -nocase $orig $got] {
+ pass $test
+ } else {
+ fail $test
+ }
+ }
+}
Reference in New Issue View Git Blame Copy Permalink