gdb/gdb-upstream.patch

1344 lines
45 KiB
Diff

http://sourceware.org/ml/gdb-cvs/2013-04/msg00056.html
### src/gdb/ChangeLog 2013/04/05 19:17:15 1.15370
### src/gdb/ChangeLog 2013/04/05 20:01:32 1.15371
## -1,5 +1,12 @@
2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
+ Convert man pages to texinfo, new gdbinit.5 texinfo page.
+ * Makefile.in (gdb.z): Remove.
+ (install-only): Remove $(man1dir) and gdb.1 installation.
+ * gdb.1: Remove.
+
+2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
+
Fix compatibility with Linux kernel 3.8.3.
* linux-tdep.c (linux_find_memory_regions_full): Move variable number
to more inner block. Remove parsing of NUMBER from outer block.
--- src/gdb/Makefile.in 2013/04/05 13:24:24 1.1246
+++ src/gdb/Makefile.in 2013/04/05 20:01:33 1.1247
@@ -1019,11 +1019,6 @@
info install-info clean-info dvi pdf install-pdf html install-html: force
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
-gdb.z:gdb.1
- nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
- pack gdb.t ; rm -f gdb.t
- mv gdb.t.z gdb.z
-
# Traditionally "install" depends on "all". But it may be useful
# not to; for example, if the user has made some trivial change to a
# source file and doesn't care about rebuilding or just wants to save the
@@ -1043,10 +1038,6 @@
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
$(INSTALL_PROGRAM) gdb$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
- $(SHELL) $(srcdir)/../mkinstalldirs \
- $(DESTDIR)$(man1dir) ; \
- $(INSTALL_DATA) $(srcdir)/gdb.1 \
- $(DESTDIR)$(man1dir)/$$transformed_name.1 ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
$(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
### src/gdb/doc/ChangeLog 2013/04/02 17:52:08 1.1432
### src/gdb/doc/ChangeLog 2013/04/05 20:01:33 1.1433
## -1,3 +1,22 @@
+2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Convert man pages to texinfo, new gdbinit.5 texinfo page.
+ * Makefile.in (mandir, man1dir, man5dir, SYSTEM_GDBINIT, MANCONF,
+ (TEXI2POD, POD2MAN1, POD2MAN5, MAN1S, MAN5S, MANS, man): New.
+ (diststuff): Add man.
+ (install-man, install-man1, install-man5, uninstall-man, uninstall-man1)
+ (uninstall-man5): New.
+ (STAGESTUFF): Add *.1 and *.5.
+ (GDBvn.texi): Add SYSTEM_GDBINIT.
+ (gdb.1, gdbserver.1, gdbinit.5): New.
+ (maintainer-clean realclean): Add $(MANS).
+ (install): Add install-man.
+ (uninstall): Add uninstall-man.
+ * gdb.texinfo (@include gdb-cfg.texi): Wrap it by @c man begin INCLUDE.
+ (@copying): Wrap it by @c man begin COPYRIGHT.
+ (Top): Add Man Pages.
+ (Man Pages, gdb man, gdbserver man, gdbinit man): New.
+
2013-04-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Debugging Output): Document "set/show debug
--- src/gdb/doc/Makefile.in 2013/01/01 06:32:56 1.57
+++ src/gdb/doc/Makefile.in 2013/04/05 20:01:33 1.58
@@ -26,6 +26,9 @@
docdir = @docdir@
pdfdir = @pdfdir@
htmldir = @htmldir@
+mandir = @mandir@
+man1dir = $(mandir)/man1
+man5dir = $(mandir)/man5
SHELL = @SHELL@
@@ -35,6 +38,8 @@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
+SYSTEM_GDBINIT = @SYSTEM_GDBINIT@
+
mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs
# main GDB source directory
@@ -160,6 +165,22 @@
$(ANNOTATE_DOC_SOURCE_INCLUDES) \
$(ANNOTATE_DOC_BUILD_INCLUDES)
+# Options to extract the man page from gdb.texinfo
+MANCONF = -Dman
+
+TEXI2POD = perl $(srcdir)/../../etc/texi2pod.pl \
+ $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
+
+POD2MAN1 = pod2man --center="GNU Development Tools" \
+ --release="gdb-$(VERSION)" --section=1
+POD2MAN5 = pod2man --center="GNU Development Tools" \
+ --release="gdb-$(VERSION)" --section=5
+
+# List of man pages generated from gdb.texi
+MAN1S = gdb.1 gdbserver.1
+MAN5S = gdbinit.5
+MANS = $(MAN1S) $(MAN5S)
+
#### Host, target, and site specific Makefile fragments come in here.
###
@@ -170,8 +191,9 @@
ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
html: $(HTMLFILES)
pdf: $(PDFFILES)
+man: $(MANS)
all-doc: info dvi ps # pdf
-diststuff: info
+diststuff: info man
rm -f gdb-cfg.texi GDBvn.texi
install-info: $(INFO_DEPS)
@@ -242,7 +264,49 @@
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
-STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
+install-man: install-man1 install-man5
+
+install-man1: $(MAN1S)
+ test -z "$(man1dir)" || $(mkinstalldirs) "$(DESTDIR)$(man1dir)"
+ @list='$(MANS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=`echo $$p | sed -e 's|^.*/||'`; \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(man1dir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(man1dir)/$$f"; \
+ done
+
+install-man5: $(MAN5S)
+ test -z "$(man5dir)" || $(mkinstalldirs) "$(DESTDIR)$(man5dir)"
+ @list='$(MANS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=`echo $$p | sed -e 's|^.*/||'`; \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(man5dir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(man5dir)/$$f"; \
+ done
+
+uninstall-man: uninstall-man1 uninstall-man5
+
+uninstall-man1:
+ @test -n "$(man1dir)" || exit 0; \
+ files=`{ l2='$(MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+
+uninstall-man5:
+ @test -n "$(man5dir)" || exit 0; \
+ files=`{ l2='$(MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.5[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man5dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man5dir)" && rm -f $$files; }
+
+STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf *.1 *.5
# Copy the object files from a particular stage into a subdirectory.
stage1: force
@@ -313,6 +377,9 @@
if test -z "$(READLINE_TEXI_INCFLAG)"; then \
echo "@set SYSTEM_READLINE" >> ./GDBvn.new; \
fi
+ if [ -n "$(SYSTEM_GDBINIT)" ]; then \
+ echo "@set SYSTEM_GDBINIT $(SYSTEM_GDBINIT)" >> ./GDBvn.new; \
+ fi
mv GDBvn.new GDBvn.texi
# Updated atomically
@@ -523,6 +590,28 @@
annotate/index.html: $(ANNOTATE_DOC_FILES)
$(MAKEHTML) $(MAKEHTMLFLAGS) -I $(srcdir) $(srcdir)/annotate.texinfo
+# Man pages
+gdb.1: $(GDB_DOC_FILES)
+ touch $@
+ -$(TEXI2POD) $(MANCONF) -Dgdb < gdb.texinfo > gdb.pod
+ -($(POD2MAN1) gdb.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ rm -f gdb.pod
+
+gdbserver.1: $(GDB_DOC_FILES)
+ touch $@
+ -$(TEXI2POD) $(MANCONF) -Dgdbserver < gdb.texinfo > gdbserver.pod
+ -($(POD2MAN1) gdbserver.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ rm -f gdbserver.pod
+
+gdbinit.5: $(GDB_DOC_FILES)
+ touch $@
+ -$(TEXI2POD) $(MANCONF) -Dgdbinit < gdb.texinfo > gdbinit.pod
+ -($(POD2MAN5) gdbinit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ rm -f gdbinit.pod
+
force:
Makefile: Makefile.in $(host_makefile_frag) ../config.status
@@ -551,8 +640,8 @@
# "clean" or "distclean". Use maintainer-clean to remove them.
maintainer-clean realclean: distclean
- rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
+ rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf $(MANS)
-install: install-info
+install: install-info install-man
-uninstall: uninstall-info
+uninstall: uninstall-info uninstall-man
--- src/gdb/doc/gdb.texinfo 2013/04/02 17:52:08 1.1069
+++ src/gdb/doc/gdb.texinfo 2013/04/05 20:01:33 1.1070
@@ -6,7 +6,9 @@
@c of @set vars. However, you can override filename with makeinfo -o.
@setfilename gdb.info
@c
+@c man begin INCLUDE
@include gdb-cfg.texi
+@c man end
@c
@settitle Debugging with @value{GDBN}
@setchapternewpage odd
@@ -46,6 +48,7 @@
@end direntry
@copying
+@c man begin COPYRIGHT
Copyright @copyright{} 1988-2013 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
@@ -58,6 +61,7 @@
(a) The FSF's Back-Cover Text is: ``You are free to copy and modify
this GNU Manual. Buying copies from GNU Press supports the FSF in
developing GNU and promoting software freedom.''
+@c man end
@end copying
@ifnottex
@@ -179,6 +183,7 @@
the operating system
* Trace File Format:: GDB trace file format
* Index Section Format:: .gdb_index section format
+* Man Pages:: Manual pages
* Copying:: GNU General Public License says
how you can copy and share GDB
* GNU Free Documentation License:: The license for this documentation
@@ -41597,6 +41602,497 @@
@}
@end smallexample
+@node Man Pages
+@appendix Manual pages
+@cindex Man pages
+
+@menu
+* gdb man:: The GNU Debugger man page
+* gdbserver man:: Remote Server for the GNU Debugger man page
+* gdbinit man:: gdbinit scripts
+@end menu
+
+@node gdb man
+@heading gdb man
+
+@c man title gdb The GNU Debugger
+
+@c man begin SYNOPSIS gdb
+gdb [@option{-help}] [@option{-nh}] [@option{-nx}] [@option{-q}]
+[@option{-batch}] [@option{-cd=}@var{dir}] [@option{-f}]
+[@option{-b}@w{ }@var{bps}]
+ [@option{-tty=}@var{dev}] [@option{-s} @var{symfile}]
+[@option{-e}@w{ }@var{prog}] [@option{-se}@w{ }@var{prog}]
+[@option{-c}@w{ }@var{core}] [@option{-x}@w{ }@var{cmds}]
+ [@option{-d}@w{ }@var{dir}] [@var{prog}|@var{core}|@var{procID}]
+@c man end
+
+@c man begin DESCRIPTION gdb
+The purpose of a debugger such as @value{GDBN} is to allow you to see what is
+going on ``inside'' another program while it executes -- or what another
+program was doing at the moment it crashed.
+
+@value{GDBN} can do four main kinds of things (plus other things in support of
+these) to help you catch bugs in the act:
+
+@itemize @bullet
+@item
+Start your program, specifying anything that might affect its behavior.
+
+@item
+Make your program stop on specified conditions.
+
+@item
+Examine what has happened, when your program has stopped.
+
+@item
+Change things in your program, so you can experiment with correcting the
+effects of one bug and go on to learn about another.
+@end itemize
+
+You can use @value{GDBN} to debug programs written in C, C@t{++}, and Modula-2.
+Fortran support will be added when a GNU Fortran compiler is ready.
+
+@value{GDBN} is invoked with the shell command @code{gdb}. Once started, it reads
+commands from the terminal until you tell it to exit with the @value{GDBN}
+command @code{quit}. You can get online help from @value{GDBN} itself
+by using the command @code{help}.
+
+You can run @code{gdb} with no arguments or options; but the most
+usual way to start @value{GDBN} is with one argument or two, specifying an
+executable program as the argument:
+
+@smallexample
+gdb program
+@end smallexample
+
+You can also start with both an executable program and a core file specified:
+
+@smallexample
+gdb program core
+@end smallexample
+
+You can, instead, specify a process ID as a second argument, if you want
+to debug a running process:
+
+@smallexample
+gdb program 1234
+@end smallexample
+
+@noindent
+would attach @value{GDBN} to process @code{1234} (unless you also have a file
+named @file{1234}; @value{GDBN} does check for a core file first).
+
+Here are some of the most frequently needed @value{GDBN} commands:
+
+@c pod2man highlights the right hand side of the @item lines.
+@table @env
+@item break [@var{file}:]@var{functiop}
+Set a breakpoint at @var{function} (in @var{file}).
+
+@item run [@var{arglist}]
+Start your program (with @var{arglist}, if specified).
+
+@item bt
+Backtrace: display the program stack.
+
+@item print @var{expr}
+Display the value of an expression.
+
+@item c
+Continue running your program (after stopping, e.g. at a breakpoint).
+
+@item next
+Execute next program line (after stopping); step @emph{over} any
+function calls in the line.
+
+@item edit [@var{file}:]@var{function}
+look at the program line where it is presently stopped.
+
+@item list [@var{file}:]@var{function}
+type the text of the program in the vicinity of where it is presently stopped.
+
+@item step
+Execute next program line (after stopping); step @emph{into} any
+function calls in the line.
+
+@item help [@var{name}]
+Show information about @value{GDBN} command @var{name}, or general information
+about using @value{GDBN}.
+
+@item quit
+Exit from @value{GDBN}.
+@end table
+
+@ifset man
+For full details on @value{GDBN},
+see @cite{Using GDB: A Guide to the GNU Source-Level Debugger},
+by Richard M. Stallman and Roland H. Pesch. The same text is available online
+as the @code{gdb} entry in the @code{info} program.
+@end ifset
+@c man end
+
+@c man begin OPTIONS gdb
+Any arguments other than options specify an executable
+file and core file (or process ID); that is, the first argument
+encountered with no
+associated option flag is equivalent to a @option{-se} option, and the second,
+if any, is equivalent to a @option{-c} option if it's the name of a file.
+Many options have
+both long and short forms; both are shown here. The long forms are also
+recognized if you truncate them, so long as enough of the option is
+present to be unambiguous. (If you prefer, you can flag option
+arguments with @option{+} rather than @option{-}, though we illustrate the
+more usual convention.)
+
+All the options and command line arguments you give are processed
+in sequential order. The order makes a difference when the @option{-x}
+option is used.
+
+@table @env
+@item -help
+@itemx -h
+List all options, with brief explanations.
+
+@item -symbols=@var{file}
+@itemx -s @var{file}
+Read symbol table from file @var{file}.
+
+@item -write
+Enable writing into executable and core files.
+
+@item -exec=@var{file}
+@itemx -e @var{file}
+Use file @var{file} as the executable file to execute when
+appropriate, and for examining pure data in conjunction with a core
+dump.
+
+@item -se=@var{file}
+Read symbol table from file @var{file} and use it as the executable
+file.
+
+@item -core=@var{file}
+@itemx -c @var{file}
+Use file @var{file} as a core dump to examine.
+
+@item -command=@var{file}
+@itemx -x @var{file}
+Execute @value{GDBN} commands from file @var{file}.
+
+@item -ex @var{command}
+Execute given @value{GDBN} @var{command}.
+
+@item -directory=@var{directory}
+@itemx -d @var{directory}
+Add @var{directory} to the path to search for source files.
+
+@item -nh
+Do not execute commands from @file{~/.gdbinit}.
+
+@item -nx
+@itemx -n
+Do not execute commands from any @file{.gdbinit} initialization files.
+
+@item -quiet
+@itemx -q
+``Quiet''. Do not print the introductory and copyright messages. These
+messages are also suppressed in batch mode.
+
+@item -batch
+Run in batch mode. Exit with status @code{0} after processing all the command
+files specified with @option{-x} (and @file{.gdbinit}, if not inhibited).
+Exit with nonzero status if an error occurs in executing the @value{GDBN}
+commands in the command files.
+
+Batch mode may be useful for running @value{GDBN} as a filter, for example to
+download and run a program on another computer; in order to make this
+more useful, the message
+
+@smallexample
+Program exited normally.
+@end smallexample
+
+@noindent
+(which is ordinarily issued whenever a program running under @value{GDBN} control
+terminates) is not issued when running in batch mode.
+
+@item -cd=@var{directory}
+Run @value{GDBN} using @var{directory} as its working directory,
+instead of the current directory.
+
+@item -fullname
+@itemx -f
+Emacs sets this option when it runs @value{GDBN} as a subprocess. It tells
+@value{GDBN} to output the full file name and line number in a standard,
+recognizable fashion each time a stack frame is displayed (which
+includes each time the program stops). This recognizable format looks
+like two @samp{\032} characters, followed by the file name, line number
+and character position separated by colons, and a newline. The
+Emacs-to-@value{GDBN} interface program uses the two @samp{\032}
+characters as a signal to display the source code for the frame.
+
+@item -b @var{bps}
+Set the line speed (baud rate or bits per second) of any serial
+interface used by @value{GDBN} for remote debugging.
+
+@item -tty=@var{device}
+Run using @var{device} for your program's standard input and output.
+@end table
+@c man end
+
+@c man begin SEEALSO gdb
+@ifset man
+The full documentation for @value{GDBN} is maintained as a Texinfo manual.
+If the @code{info} and @code{gdb} programs and @value{GDBN}'s Texinfo
+documentation are properly installed at your site, the command
+
+@smallexample
+info gdb
+@end smallexample
+
+@noindent
+should give you access to the complete manual.
+
+@cite{Using GDB: A Guide to the GNU Source-Level Debugger},
+Richard M. Stallman and Roland H. Pesch, July 1991.
+@end ifset
+@c man end
+
+@node gdbserver man
+@heading gdbserver man
+
+@c man title gdbserver Remote Server for the GNU Debugger
+@format
+@c man begin SYNOPSIS gdbserver
+gdbserver @var{tty} @var{prog} [@var{args}@dots{}]
+
+gdbserver @var{tty} --attach @var{PID}
+@c man end
+@end format
+
+@c man begin DESCRIPTION gdbserver
+@command{gdbserver} is a program that allows you to run @value{GDBN} on a different machine
+than the one which is running the program being debugged.
+
+@ifclear man
+@subheading Usage (server (target) side)
+@end ifclear
+@ifset man
+Usage (server (target) side):
+@end ifset
+
+First, you need to have a copy of the program you want to debug put onto
+the target system. The program can be stripped to save space if needed, as
+@command{gdbserver} doesn't care about symbols. All symbol handling is taken care of by
+the @value{GDBN} running on the host system.
+
+To use the server, you log on to the target system, and run the @command{gdbserver}
+program. You must tell it (a) how to communicate with @value{GDBN}, (b) the name of
+your program, and (c) its arguments. The general syntax is:
+
+@smallexample
+target> gdbserver @var{comm} @var{program} [@var{args} ...]
+@end smallexample
+
+For example, using a serial port, you might say:
+
+@smallexample
+@ifset man
+@c @file would wrap it as F</dev/com1>.
+target> gdbserver /dev/com1 emacs foo.txt
+@end ifset
+@ifclear man
+target> gdbserver @file{/dev/com1} emacs foo.txt
+@end ifclear
+@end smallexample
+
+This tells @command{gdbserver} to debug emacs with an argument of foo.txt, and
+to communicate with @value{GDBN} via @file{/dev/com1}. @command{gdbserver} now
+waits patiently for the host @value{GDBN} to communicate with it.
+
+To use a TCP connection, you could say:
+
+@smallexample
+target> gdbserver host:2345 emacs foo.txt
+@end smallexample
+
+This says pretty much the same thing as the last example, except that we are
+going to communicate with the @code{host} @value{GDBN} via TCP. The @code{host:2345} argument means
+that we are expecting to see a TCP connection from @code{host} to local TCP port
+2345. (Currently, the @code{host} part is ignored.) You can choose any number you
+want for the port number as long as it does not conflict with any existing TCP
+ports on the target system. This same port number must be used in the host
+@value{GDBN}s @code{target remote} command, which will be described shortly. Note that if
+you chose a port number that conflicts with another service, @command{gdbserver} will
+print an error message and exit.
+
+On some targets, @command{gdbserver} can also attach to running programs.
+This is accomplished via the @option{--attach} argument. The syntax is:
+
+@smallexample
+target> gdbserver @var{comm} --attach @var{pid}
+@end smallexample
+
+@var{pid} is the process ID of a currently running process. It isn't
+necessary to point @command{gdbserver} at a binary for the running process.
+
+@ifclear man
+@subheading Usage (host side)
+@end ifclear
+@ifset man
+Usage (host side):
+@end ifset
+
+You need an unstripped copy of the target program on your host system, since
+@value{GDBN} needs to examine it's symbol tables and such. Start up @value{GDBN} as you normally
+would, with the target program as the first argument. (You may need to use the
+@option{--baud} option if the serial line is running at anything except 9600 baud.)
+That is @code{gdb TARGET-PROG}, or @code{gdb --baud BAUD TARGET-PROG}. After that, the only
+new command you need to know about is @code{target remote}. It's argument is either
+a device name (usually a serial device, like @file{/dev/ttyb}), or a @code{HOST:PORT}
+descriptor. For example:
+
+@smallexample
+@ifset man
+@c @file would wrap it as F</dev/ttyb>.
+(gdb) target remote /dev/ttyb
+@end ifset
+@ifclear man
+(gdb) target remote @file{/dev/ttyb}
+@end ifclear
+@end smallexample
+
+@noindent
+communicates with the server via serial line @file{/dev/ttyb}, and:
+
+@smallexample
+(gdb) target remote the-target:2345
+@end smallexample
+
+@noindent
+communicates via a TCP connection to port 2345 on host `the-target', where
+you previously started up @command{gdbserver} with the same port number. Note that for
+TCP connections, you must start up @command{gdbserver} prior to using the `target remote'
+command, otherwise you may get an error that looks something like
+`Connection refused'.
+@c man end
+
+@c man begin OPTIONS gdbserver
+You have to supply the name of the program to debug
+and the tty to communicate on; the remote @value{GDBN} will do everything else.
+Any remaining arguments will be passed to the program verbatim.
+@c man end
+
+@c man begin SEEALSO gdbserver
+@ifset man
+The full documentation for @value{GDBN} is maintained as a Texinfo manual.
+If the @code{info} and @code{gdb} programs and @value{GDBN}'s Texinfo
+documentation are properly installed at your site, the command
+
+@smallexample
+info gdb
+@end smallexample
+
+should give you access to the complete manual.
+
+@cite{Using GDB: A Guide to the GNU Source-Level Debugger},
+Richard M. Stallman and Roland H. Pesch, July 1991.
+@end ifset
+@c man end
+
+@node gdbinit man
+@heading gdbinit
+
+@c man title gdbinit GDB initialization scripts
+
+@format
+@c man begin SYNOPSIS gdbinit
+@ifset SYSTEM_GDBINIT
+@value{SYSTEM_GDBINIT}
+@end ifset
+
+~/.gdbinit
+
+./.gdbinit
+@c man end
+@end format
+
+@c man begin DESCRIPTION gdbinit
+These files contain @value{GDBN} commands to automatically execute during
+@value{GDBN} startup. The lines of contents are canned sequences of commands,
+described in
+@ifset man
+the @value{GDBN} manual in node @code{Sequences}
+-- shell command @code{info -f gdb -n Sequences}.
+@end ifset
+@ifclear man
+@ref{Sequences}.
+@end ifclear
+
+Please read more in
+@ifset man
+the @value{GDBN} manual in node @code{Startup}
+-- shell command @code{info -f gdb -n Startup}.
+@end ifset
+@ifclear man
+@ref{Startup}.
+@end ifclear
+
+@table @env
+@ifset SYSTEM_GDBINIT
+@item @value{SYSTEM_GDBINIT}
+@end ifset
+@ifclear SYSTEM_GDBINIT
+@item (not enabled with @code{--with-system-gdbinit} during compilation)
+@end ifclear
+System-wide initialization file. It is executed unless user specified
+@value{GDBN} option @code{-nx} or @code{-n}.
+See more in
+@ifset man
+the @value{GDBN} manual in node @code{System-wide configuration}
+-- shell command @code{info -f gdb -n 'System-wide configuration'}.
+@end ifset
+@ifclear man
+@ref{System-wide configuration}.
+@end ifclear
+
+@item ~/.gdbinit
+User initialization file. It is executed unless user specified
+@value{GDBN} options @code{-nx}, @code{-n} or @code{-nh}.
+
+@item ./.gdbinit
+Initialization file for current directory. It may need to be enabled with
+@value{GDBN} security command @code{set auto-load local-gdbinit}.
+See more in
+@ifset man
+the @value{GDBN} manual in node @code{Init File in the Current Directory}
+-- shell command @code{info -f gdb -n 'Init File in the Current Directory'}.
+@end ifset
+@ifclear man
+@ref{Init File in the Current Directory}.
+@end ifclear
+@end table
+@c man end
+
+@c man begin SEEALSO gdbinit
+@ifset man
+gdb(1), @code{info -f gdb -n Startup}
+
+The full documentation for @value{GDBN} is maintained as a Texinfo manual.
+If the @code{info} and @code{gdb} programs and @value{GDBN}'s Texinfo
+documentation are properly installed at your site, the command
+
+@smallexample
+info gdb
+@end smallexample
+
+should give you access to the complete manual.
+
+@cite{Using GDB: A Guide to the GNU Source-Level Debugger},
+Richard M. Stallman and Roland H. Pesch, July 1991.
+@end ifset
+@c man end
+
@include gpl.texi
@node GNU Free Documentation License
### src/gdb/gdbserver/ChangeLog 2013/03/22 14:52:26 1.702
### src/gdb/gdbserver/ChangeLog 2013/04/05 20:01:33 1.703
## -1,3 +1,10 @@
+2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Convert man pages to texinfo, new gdbinit.5 texinfo page.
+ * Makefile.in (install-only): Remove $(man1dir) and gdbserver.1
+ installation.
+ * gdbserver.1: Remove.
+
2013-03-22 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Don't call
--- src/gdb/gdbserver/Makefile.in 2013/03/15 17:30:27 1.145
+++ src/gdb/gdbserver/Makefile.in 2013/04/05 20:01:33 1.146
@@ -252,8 +252,6 @@
fi; \
$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir); \
$(INSTALL_PROGRAM) gdbserver$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT); \
- $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(man1dir); \
- $(INSTALL_DATA) $(srcdir)/gdbserver.1 $(DESTDIR)$(man1dir)/$$n.1
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
uninstall: force
http://sourceware.org/ml/gdb-cvs/2013-04/msg00057.html
### src/gdb/doc/ChangeLog 2013/04/05 20:01:33 1.1433
### src/gdb/doc/ChangeLog 2013/04/05 20:02:58 1.1434
## -1,5 +1,10 @@
2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
+ * gdb.texinfo (gdb man): Mention option -p. Include Fortran to
+ the list of supported languages.
+
+2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
+
Convert man pages to texinfo, new gdbinit.5 texinfo page.
* Makefile.in (mandir, man1dir, man5dir, SYSTEM_GDBINIT, MANCONF,
(TEXI2POD, POD2MAN1, POD2MAN5, MAN1S, MAN5S, MANS, man): New.
--- src/gdb/doc/gdb.texinfo 2013/04/05 20:01:33 1.1070
+++ src/gdb/doc/gdb.texinfo 2013/04/05 20:02:58 1.1071
@@ -41623,8 +41623,9 @@
[@option{-b}@w{ }@var{bps}]
[@option{-tty=}@var{dev}] [@option{-s} @var{symfile}]
[@option{-e}@w{ }@var{prog}] [@option{-se}@w{ }@var{prog}]
-[@option{-c}@w{ }@var{core}] [@option{-x}@w{ }@var{cmds}]
- [@option{-d}@w{ }@var{dir}] [@var{prog}|@var{core}|@var{procID}]
+[@option{-c}@w{ }@var{core}] [@option{-p}@w{ }@var{procID}]
+ [@option{-x}@w{ }@var{cmds}] [@option{-d}@w{ }@var{dir}]
+[@var{prog}|@var{prog} @var{procID}|@var{prog} @var{core}]
@c man end
@c man begin DESCRIPTION gdb
@@ -41650,8 +41651,8 @@
effects of one bug and go on to learn about another.
@end itemize
-You can use @value{GDBN} to debug programs written in C, C@t{++}, and Modula-2.
-Fortran support will be added when a GNU Fortran compiler is ready.
+You can use @value{GDBN} to debug programs written in C, C@t{++}, Fortran and
+Modula-2.
@value{GDBN} is invoked with the shell command @code{gdb}. Once started, it reads
commands from the terminal until you tell it to exit with the @value{GDBN}
@@ -41677,11 +41678,13 @@
@smallexample
gdb program 1234
+gdb -p 1234
@end smallexample
@noindent
would attach @value{GDBN} to process @code{1234} (unless you also have a file
named @file{1234}; @value{GDBN} does check for a core file first).
+With option @option{-p} you can omit the @var{program} filename.
Here are some of the most frequently needed @value{GDBN} commands:
http://sourceware.org/ml/gdb-cvs/2013-04/msg00064.html
### src/gdb/doc/ChangeLog 2013/04/05 20:02:58 1.1434
### src/gdb/doc/ChangeLog 2013/04/06 08:58:53 1.1435
## -1,3 +1,11 @@
+2013-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
+ Eli Zaretskii <eliz@gnu.org>
+
+ * gdb.texinfo (gdbserver man): Rename tty to comm. Swap --attach
+ parameters order. Remove "On some targets" for --attach. Document the
+ --multi parameter and extended-remote command. Document all the
+ options.
+
2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (gdb man): Mention option -p. Include Fortran to
--- src/gdb/doc/gdb.texinfo 2013/04/05 20:02:58 1.1071
+++ src/gdb/doc/gdb.texinfo 2013/04/06 08:58:53 1.1072
@@ -41867,9 +41867,11 @@
@c man title gdbserver Remote Server for the GNU Debugger
@format
@c man begin SYNOPSIS gdbserver
-gdbserver @var{tty} @var{prog} [@var{args}@dots{}]
+gdbserver @var{comm} @var{prog} [@var{args}@dots{}]
-gdbserver @var{tty} --attach @var{PID}
+gdbserver --attach @var{comm} @var{pid}
+
+gdbserver --multi @var{comm}
@c man end
@end format
@@ -41929,16 +41931,25 @@
you chose a port number that conflicts with another service, @command{gdbserver} will
print an error message and exit.
-On some targets, @command{gdbserver} can also attach to running programs.
+@command{gdbserver} can also attach to running programs.
This is accomplished via the @option{--attach} argument. The syntax is:
@smallexample
-target> gdbserver @var{comm} --attach @var{pid}
+target> gdbserver --attach @var{comm} @var{pid}
@end smallexample
@var{pid} is the process ID of a currently running process. It isn't
necessary to point @command{gdbserver} at a binary for the running process.
+To start @code{gdbserver} without supplying an initial command to run
+or process ID to attach, use the @option{--multi} command line option.
+In such case you should connect using @kbd{target extended-remote} to start
+the program you want to debug.
+
+@smallexample
+target> gdbserver --multi @var{comm}
+@end smallexample
+
@ifclear man
@subheading Usage (host side)
@end ifclear
@@ -41951,7 +41962,8 @@
would, with the target program as the first argument. (You may need to use the
@option{--baud} option if the serial line is running at anything except 9600 baud.)
That is @code{gdb TARGET-PROG}, or @code{gdb --baud BAUD TARGET-PROG}. After that, the only
-new command you need to know about is @code{target remote}. It's argument is either
+new command you need to know about is @code{target remote}
+(or @code{target extended-remote}). Its argument is either
a device name (usually a serial device, like @file{/dev/ttyb}), or a @code{HOST:PORT}
descriptor. For example:
@@ -41978,12 +41990,131 @@
TCP connections, you must start up @command{gdbserver} prior to using the `target remote'
command, otherwise you may get an error that looks something like
`Connection refused'.
+
+@command{gdbserver} can also debug multiple inferiors at once,
+described in
+@ifset man
+the @value{GDBN} manual in node @code{Inferiors and Programs}
+-- shell command @code{info -f gdb -n 'Inferiors and Programs'}.
+@end ifset
+@ifclear man
+@ref{Inferiors and Programs}.
+@end ifclear
+In such case use the @code{extended-remote} @value{GDBN} command variant:
+
+@smallexample
+(gdb) target extended-remote the-target:2345
+@end smallexample
+
+The @command{gdbserver} option @option{--multi} may or may not be used in such
+case.
@c man end
@c man begin OPTIONS gdbserver
-You have to supply the name of the program to debug
-and the tty to communicate on; the remote @value{GDBN} will do everything else.
-Any remaining arguments will be passed to the program verbatim.
+There are three different modes for invoking @command{gdbserver}:
+
+@itemize @bullet
+
+@item
+Debug a specific program specified by its program name:
+
+@smallexample
+gdbserver @var{comm} @var{prog} [@var{args}@dots{}]
+@end smallexample
+
+The @var{comm} parameter specifies how should the server communicate
+with @value{GDBN}; it is either a device name (to use a serial line),
+a TCP port number (@code{:1234}), or @code{-} or @code{stdio} to use
+stdin/stdout of @code{gdbserver}. Specify the name of the program to
+debug in @var{prog}. Any remaining arguments will be passed to the
+program verbatim. When the program exits, @value{GDBN} will close the
+connection, and @code{gdbserver} will exit.
+
+@item
+Debug a specific program by specifying the process ID of a running
+program:
+
+@smallexample
+gdbserver --attach @var{comm} @var{pid}
+@end smallexample
+
+The @var{comm} parameter is as described above. Supply the process ID
+of a running program in @var{pid}; @value{GDBN} will do everything
+else. Like with the previous mode, when the process @var{pid} exits,
+@value{GDBN} will close the connection, and @code{gdbserver} will exit.
+
+@item
+Multi-process mode -- debug more than one program/process:
+
+@smallexample
+gdbserver --multi @var{comm}
+@end smallexample
+
+In this mode, @value{GDBN} can instruct @command{gdbserver} which
+command(s) to run. Unlike the other 2 modes, @value{GDBN} will not
+close the connection when a process being debugged exits, so you can
+debug several processes in the same session.
+@end itemize
+
+In each of the modes you may specify these options:
+
+@table @env
+
+@item --help
+List all options, with brief explanations.
+
+@item --version
+This option causes @command{gdbserver} to print its version number and exit.
+
+@item --attach
+@command{gdbserver} will attach to a running program. The syntax is:
+
+@smallexample
+target> gdbserver --attach @var{comm} @var{pid}
+@end smallexample
+
+@var{pid} is the process ID of a currently running process. It isn't
+necessary to point @command{gdbserver} at a binary for the running process.
+
+@item --multi
+To start @code{gdbserver} without supplying an initial command to run
+or process ID to attach, use this command line option.
+Then you can connect using @kbd{target extended-remote} and start
+the program you want to debug. The syntax is:
+
+@smallexample
+target> gdbserver --multi @var{comm}
+@end smallexample
+
+@item --debug
+Instruct @code{gdbserver} to display extra status information about the debugging
+process.
+This option is intended for @code{gdbserver} development and for bug reports to
+the developers.
+
+@item --remote-debug
+Instruct @code{gdbserver} to display remote protocol debug output.
+This option is intended for @code{gdbserver} development and for bug reports to
+the developers.
+
+@item --wrapper
+Specify a wrapper to launch programs
+for debugging. The option should be followed by the name of the
+wrapper, then any command-line arguments to pass to the wrapper, then
+@kbd{--} indicating the end of the wrapper arguments.
+
+@item --once
+By default, @command{gdbserver} keeps the listening TCP port open, so that
+additional connections are possible. However, if you start @code{gdbserver}
+with the @option{--once} option, it will stop listening for any further
+connection attempts after connecting to the first @value{GDBN} session.
+
+@c --disable-packet is not documented for users.
+
+@c --disable-randomization and --no-disable-randomization are superseded by
+@c QDisableRandomization.
+
+@end table
@c man end
@c man begin SEEALSO gdbserver
http://sourceware.org/ml/gdb-cvs/2013-04/msg00065.html
### src/gdb/doc/ChangeLog 2013/04/06 08:58:53 1.1435
### src/gdb/doc/ChangeLog 2013/04/06 15:52:06 1.1436
## -1,4 +1,8 @@
2013-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ * Makefile.in (POD2MAN1, POD2MAN5): Replace $(VERSION) by ../version.in.
+
+2013-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (gdbserver man): Rename tty to comm. Swap --attach
--- src/gdb/doc/Makefile.in 2013/04/05 20:01:33 1.58
+++ src/gdb/doc/Makefile.in 2013/04/06 15:52:06 1.59
@@ -172,9 +172,9 @@
$(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
POD2MAN1 = pod2man --center="GNU Development Tools" \
- --release="gdb-$(VERSION)" --section=1
+ --release="gdb-`sed q $(srcdir)/../version.in`" --section=1
POD2MAN5 = pod2man --center="GNU Development Tools" \
- --release="gdb-$(VERSION)" --section=5
+ --release="gdb-`sed q $(srcdir)/../version.in`" --section=5
# List of man pages generated from gdb.texi
MAN1S = gdb.1 gdbserver.1
http://sourceware.org/ml/gdb-cvs/2013-04/msg00068.html
### src/gdb/gdbserver/ChangeLog 2013/04/05 20:01:33 1.703
### src/gdb/gdbserver/ChangeLog 2013/04/07 05:53:21 1.704
## -1,3 +1,7 @@
+2013-04-07 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ * Makefile.in (install-only): Fix make install regression.
+
2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
Convert man pages to texinfo, new gdbinit.5 texinfo page.
--- src/gdb/gdbserver/Makefile.in 2013/04/05 20:01:33 1.146
+++ src/gdb/gdbserver/Makefile.in 2013/04/07 05:53:22 1.147
@@ -251,7 +251,7 @@
$(INSTALL_PROGRAM) $(IPA_LIB) $(DESTDIR)$(libdir)/$(IPA_LIB); \
fi; \
$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir); \
- $(INSTALL_PROGRAM) gdbserver$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT); \
+ $(INSTALL_PROGRAM) gdbserver$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT)
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
uninstall: force
http://sourceware.org/ml/gdb-cvs/2013-04/msg00069.html
### src/gdb/doc/ChangeLog 2013/04/06 15:52:06 1.1436
### src/gdb/doc/ChangeLog 2013/04/07 06:04:58 1.1437
## -2,6 +2,9 @@
* Makefile.in (POD2MAN1, POD2MAN5): Replace $(VERSION) by ../version.in.
+ * Makefile.in (install-man1, install-man5, uninstall-man1)
+ (uninstall-man5): Replace $(MANS) by $(MAN1S) and $(MAN5S) respectively.
+
2013-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Eli Zaretskii <eliz@gnu.org>
--- src/gdb/doc/Makefile.in 2013/04/06 15:52:06 1.59
+++ src/gdb/doc/Makefile.in 2013/04/07 06:04:58 1.60
@@ -268,7 +268,7 @@
install-man1: $(MAN1S)
test -z "$(man1dir)" || $(mkinstalldirs) "$(DESTDIR)$(man1dir)"
- @list='$(MANS)'; for p in $$list; do \
+ @list='$(MAN1S)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=`echo $$p | sed -e 's|^.*/||'`; \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(man1dir)/$$f'"; \
@@ -277,7 +277,7 @@
install-man5: $(MAN5S)
test -z "$(man5dir)" || $(mkinstalldirs) "$(DESTDIR)$(man5dir)"
- @list='$(MANS)'; for p in $$list; do \
+ @list='$(MAN5S)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=`echo $$p | sed -e 's|^.*/||'`; \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(man5dir)/$$f'"; \
@@ -288,7 +288,7 @@
uninstall-man1:
@test -n "$(man1dir)" || exit 0; \
- files=`{ l2='$(MANS)'; for i in $$l2; do echo "$$i"; done | \
+ files=`{ l2='$(MAN1S)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
@@ -298,7 +298,7 @@
uninstall-man5:
@test -n "$(man5dir)" || exit 0; \
- files=`{ l2='$(MANS)'; for i in $$l2; do echo "$$i"; done | \
+ files=`{ l2='$(MAN5S)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.5[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
http://sourceware.org/ml/gdb-cvs/2013-04/msg00070.html
### src/gdb/doc/ChangeLog 2013/04/07 06:04:58 1.1437
### src/gdb/doc/ChangeLog 2013/04/07 06:20:19 1.1438
## -5,6 +5,8 @@
* Makefile.in (install-man1, install-man5, uninstall-man1)
(uninstall-man5): Replace $(MANS) by $(MAN1S) and $(MAN5S) respectively.
+ * Makefile.in (gdb.1, gdbserver.1, gdbinit.5): Use $(srcdir).
+
2013-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Eli Zaretskii <eliz@gnu.org>
--- src/gdb/doc/Makefile.in 2013/04/07 06:04:58 1.60
+++ src/gdb/doc/Makefile.in 2013/04/07 06:20:19 1.61
@@ -593,21 +593,21 @@
# Man pages
gdb.1: $(GDB_DOC_FILES)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dgdb < gdb.texinfo > gdb.pod
+ -$(TEXI2POD) $(MANCONF) -Dgdb < $(srcdir)/gdb.texinfo > gdb.pod
-($(POD2MAN1) gdb.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
rm -f gdb.pod
gdbserver.1: $(GDB_DOC_FILES)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dgdbserver < gdb.texinfo > gdbserver.pod
+ -$(TEXI2POD) $(MANCONF) -Dgdbserver < $(srcdir)/gdb.texinfo > gdbserver.pod
-($(POD2MAN1) gdbserver.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
rm -f gdbserver.pod
gdbinit.5: $(GDB_DOC_FILES)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dgdbinit < gdb.texinfo > gdbinit.pod
+ -$(TEXI2POD) $(MANCONF) -Dgdbinit < $(srcdir)/gdb.texinfo > gdbinit.pod
-($(POD2MAN5) gdbinit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
rm -f gdbinit.pod
http://sourceware.org/bugzilla/show_bug.cgi?id=15413
http://sourceware.org/ml/gdb-cvs/2013-05/msg00063.html
### src/gdb/ChangeLog 2013/04/26 14:13:13 1.15260.2.50
### src/gdb/ChangeLog 2013/05/07 17:04:56 1.15260.2.51
## -1,3 +1,10 @@
+2013-05-07 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ PR breakpoints/15413:
+ * breakpoint.c (condition_completer): Simplify the code to
+ disconsider multiple locations of breakpoints when completing the
+ "condition" command.
+
2013-04-26 Joel Brobecker <brobecker@adacore.com>
* version.in: Set version to 7.6.0.20130426-cvs.
--- src/gdb/breakpoint.c 2013/04/25 08:15:34 1.745.2.5
+++ src/gdb/breakpoint.c 2013/05/07 17:04:57 1.745.2.6
@@ -1015,27 +1015,14 @@
len = strlen (text);
ALL_BREAKPOINTS (b)
- {
- int single = b->loc->next == NULL;
- struct bp_location *loc;
- int count = 1;
-
- for (loc = b->loc; loc; loc = loc->next)
- {
- char location[50];
-
- if (single)
- xsnprintf (location, sizeof (location), "%d", b->number);
- else
- xsnprintf (location, sizeof (location), "%d.%d", b->number,
- count);
+ {
+ char number[50];
- if (strncmp (location, text, len) == 0)
- VEC_safe_push (char_ptr, result, xstrdup (location));
+ xsnprintf (number, sizeof (number), "%d", b->number);
- ++count;
- }
- }
+ if (strncmp (number, text, len) == 0)
+ VEC_safe_push (char_ptr, result, xstrdup (number));
+ }
return result;
}
### src/gdb/testsuite/ChangeLog 2013/05/03 16:26:32 1.3580.2.20
### src/gdb/testsuite/ChangeLog 2013/05/07 17:04:57 1.3580.2.21
## -1,3 +1,11 @@
+2013-05-07 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ PR breakpoints/15413:
+ * gdb.base/pending.exp: Add test for completion of the "condition"
+ command for pending breakpoints.
+ * gdb.linespec/linespec.ex: Add test for completion of the
+ "condition" command when dealing with multiple locations.
+
2013-05-03 Hafiz Abid Qadeer <abidh@codesourcery.com>
* status-stop.exp (test_tstart_tstart): Check for error
--- src/gdb/testsuite/gdb.base/pending.exp 2013/01/01 06:33:26 1.27
+++ src/gdb/testsuite/gdb.base/pending.exp 2013/05/07 17:04:57 1.27.2.1
@@ -55,6 +55,9 @@
}
}
+# Complete the condition (PR 15413).
+gdb_test "complete condition " "condition 1"
+
gdb_test "info break" \
"Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+breakpoint keep y.*PENDING.*pendfunc1.*" \
--- src/gdb/testsuite/gdb.linespec/linespec.exp 2013/01/01 06:41:24 1.6
+++ src/gdb/testsuite/gdb.linespec/linespec.exp 2013/05/07 17:04:57 1.6.2.1
@@ -63,6 +63,10 @@
"Breakpoint $decimal at $hex: dupname:label. \[(\]2 locations\[)\]" \
"multi-location break using duplicate function name and label"
+# Testing if the "condition" command completes only the breakpoints,
+# not the locations.
+gdb_test "complete condition " "condition $decimal\r\ncondition $decimal\r\ncondition $decimal"
+
gdb_test_no_output "set breakpoint pending off" \
"disable pending breakpoints for linespec tests"
https://bugzilla.redhat.com/show_bug.cgi?id=967915
http://sourceware.org/ml/gdb-cvs/2013-05/msg00146.html
### src/gdb/ChangeLog 2013/05/17 18:09:05 1.15569
### src/gdb/ChangeLog 2013/05/17 23:05:00 1.15570
## -1,3 +1,9 @@
+2013-05-17 Edjunior Machado <emachado@linux.vnet.ibm.com>
+
+ * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Check if the
+ region is ok for a hardware watchpoint using the new ptrace interface
+ on Power servers.
+
2013-05-17 Doug Evans <dje@google.com>
* NEWS: Mention new maintenance commands check-symtabs, and
--- src/gdb/ppc-linux-nat.c 2013/05/07 07:43:33 1.119
+++ src/gdb/ppc-linux-nat.c 2013/05/17 23:05:00 1.120
@@ -1503,16 +1503,19 @@
to determine the hardcoded watchable region for watchpoints. */
if (have_ptrace_booke_interface ())
{
- /* DAC-based processors (i.e., embedded processors), like the PowerPC 440
- have ranged watchpoints and can watch any access within an arbitrary
- memory region. This is useful to watch arrays and structs, for
- instance. It takes two hardware watchpoints though. */
+ /* Embedded DAC-based processors, like the PowerPC 440 have ranged
+ watchpoints and can watch any access within an arbitrary memory
+ region. This is useful to watch arrays and structs, for instance. It
+ takes two hardware watchpoints though. */
if (len > 1
- && booke_debug_info.features & PPC_DEBUG_FEATURE_DATA_BP_RANGE)
+ && booke_debug_info.features & PPC_DEBUG_FEATURE_DATA_BP_RANGE
+ && ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
return 2;
- else if (booke_debug_info.data_bp_alignment
- && (addr + len > (addr & ~(booke_debug_info.data_bp_alignment - 1))
- + booke_debug_info.data_bp_alignment))
+ /* Server processors provide one hardware watchpoint and addr+len should
+ fall in the watchable region provided by the ptrace interface. */
+ if (booke_debug_info.data_bp_alignment
+ && (addr + len > (addr & ~(booke_debug_info.data_bp_alignment - 1))
+ + booke_debug_info.data_bp_alignment))
return 0;
}
/* addr+len must fall in the 8 byte watchable region for DABR-based