rpms
/
gdb
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
gdb/gdb-6.6-scheduler_locking-s...

205 lines
7.8 KiB
Diff
Raw Blame History

2007-06-25 Jan Kratochvil <jan.kratochvil@redhat.com>
* inferior.h (enum resume_step): New definition.
(resume): Change STEP parameter type to ENUM RESUME_STEP.
* infrun.c (resume): Likewise. Extend debug printing of the STEP
parameter. Lock the scheduler only for intentional stepping.
(proceed): Replace the variable ONESTEP with tristate RESUME_STEP.
Set the third RESUME_STEP state according to BPSTAT_SHOULD_STEP.
(currently_stepping): Change the return type to ENUM RESUME_STEP.
Return RESUME_STEP_NEEDED if it is just due to BPSTAT_SHOULD_STEP.
* linux-nat.c (select_singlestep_lwp_callback): Do not focus on
the software watchpoint events.
* linux-nat.h (struct lwp_info): Redeclare STEP as ENUM RESUME_STEP.
2007-10-19 Jan Kratochvil <jan.kratochvil@redhat.com>
* infrun.c (proceed): RESUME_STEP initialized for non-stepping.
RESUME_STEP set according to STEP only at the end of the function.
2008-02-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Port to GDB-6.8pre.
Index: gdb-6.8cvs20080219/gdb/inferior.h
===================================================================
--- gdb-6.8cvs20080219.orig/gdb/inferior.h 2008-02-14 23:03:57.000000000 +0100
+++ gdb-6.8cvs20080219/gdb/inferior.h 2008-02-19 14:15:01.000000000 +0100
@@ -179,7 +179,15 @@ extern void reopen_exec_file (void);
/* The `resume' routine should only be called in special circumstances.
Normally, use `proceed', which handles a lot of bookkeeping. */
-extern void resume (int, enum target_signal);
+enum resume_step
+ {
+ /* currently_stepping () should return non-zero for non-continue. */
+ RESUME_STEP_CONTINUE = 0,
+ RESUME_STEP_USER, /* Stepping is intentional by the user. */
+ RESUME_STEP_NEEDED /* Stepping only for software watchpoints. */
+ };
+
+extern void resume (enum resume_step, enum target_signal);
/* From misc files */
Index: gdb-6.8cvs20080219/gdb/infrun.c
===================================================================
--- gdb-6.8cvs20080219.orig/gdb/infrun.c 2008-02-14 23:03:57.000000000 +0100
+++ gdb-6.8cvs20080219/gdb/infrun.c 2008-02-19 14:24:37.000000000 +0100
@@ -74,7 +74,8 @@ static void set_schedlock_func (char *ar
struct execution_control_state;
-static int currently_stepping (struct execution_control_state *ecs);
+static enum resume_step currently_stepping (struct execution_control_state
+ *ecs);
static void xdb_handle_command (char *args, int from_tty);
@@ -508,15 +509,18 @@ set_schedlock_func (char *args, int from
STEP nonzero if we should step (zero to continue instead).
SIG is the signal to give the inferior (zero for none). */
void
-resume (int step, enum target_signal sig)
+resume (enum resume_step step, enum target_signal sig)
{
int should_resume = 1;
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
- step, sig);
+ fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%s, signal=%d)\n",
+ (step == RESUME_STEP_CONTINUE ? "RESUME_STEP_CONTINUE"
+ : (step == RESUME_STEP_USER ? "RESUME_STEP_USER"
+ : "RESUME_STEP_NEEDED")),
+ sig);
/* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
@@ -632,9 +636,10 @@ a command like `return' or `jump' to con
resume_ptid = inferior_ptid;
}
- if ((scheduler_mode == schedlock_on)
+ if (scheduler_mode == schedlock_on
|| (scheduler_mode == schedlock_step
- && (step || singlestep_breakpoints_inserted_p)))
+ && (step == RESUME_STEP_USER
+ || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
@@ -742,7 +747,7 @@ static CORE_ADDR prev_pc;
void
proceed (CORE_ADDR addr, enum target_signal siggnal, int step)
{
- int oneproc = 0;
+ enum resume_step resume_step = RESUME_STEP_CONTINUE;
if (step > 0)
step_start_function = find_pc_function (read_pc ());
@@ -756,13 +761,13 @@ proceed (CORE_ADDR addr, enum target_sig
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint). */
- oneproc = 1;
+ resume_step = RESUME_STEP_USER;
else if (gdbarch_single_step_through_delay_p (current_gdbarch)
&& gdbarch_single_step_through_delay (current_gdbarch,
get_current_frame ()))
/* We stepped onto an instruction that needs to be stepped
again before re-inserting the breakpoint, do so. */
- oneproc = 1;
+ resume_step = RESUME_STEP_USER;
}
else
{
@@ -786,9 +791,9 @@ proceed (CORE_ADDR addr, enum target_sig
that reported the most recent event. If a step-over is required
it returns TRUE and sets the current thread to the old thread. */
if (prepare_to_proceed (step))
- oneproc = 1;
+ resume_step = RESUME_STEP_USER;
- if (oneproc)
+ if (resume_step == RESUME_STEP_USER)
/* We will get a trace trap after one instruction.
Continue it automatically and insert breakpoints then. */
stepping_over_breakpoint = 1;
@@ -832,8 +837,13 @@ proceed (CORE_ADDR addr, enum target_sig
updated correctly when the inferior is stopped. */
prev_pc = read_pc ();
+ if (step)
+ resume_step = RESUME_STEP_USER;
+ if (resume_step == RESUME_STEP_CONTINUE && bpstat_should_step ())
+ resume_step = RESUME_STEP_NEEDED;
+
/* Resume inferior. */
- resume (oneproc || step || bpstat_should_step (), stop_signal);
+ resume (resume_step, stop_signal);
/* Wait for it to stop (if not standalone)
and in any case decode why it stopped, and act accordingly. */
@@ -2723,14 +2733,21 @@ process_event_stop_test:
/* Are we in the middle of stepping? */
-static int
+static enum resume_step
currently_stepping (struct execution_control_state *ecs)
{
- return ((!ecs->handling_longjmp
- && ((step_range_end && step_resume_breakpoint == NULL)
- || stepping_over_breakpoint))
- || ecs->stepping_through_solib_after_catch
- || bpstat_should_step ());
+ if (!ecs->handling_longjmp
+ && ((step_range_end && step_resume_breakpoint == NULL)
+ || stepping_over_breakpoint))
+ return RESUME_STEP_USER;
+
+ if (ecs->stepping_through_solib_after_catch)
+ return RESUME_STEP_USER;
+
+ if (bpstat_should_step ())
+ return RESUME_STEP_NEEDED;
+
+ return RESUME_STEP_CONTINUE;
}
/* Subroutine call with source code we should not step over. Do step
Index: gdb-6.8cvs20080219/gdb/linux-nat.c
===================================================================
--- gdb-6.8cvs20080219.orig/gdb/linux-nat.c 2008-02-14 23:03:57.000000000 +0100
+++ gdb-6.8cvs20080219/gdb/linux-nat.c 2008-02-19 14:15:01.000000000 +0100
@@ -1751,7 +1751,10 @@ count_events_callback (struct lwp_info *
static int
select_singlestep_lwp_callback (struct lwp_info *lp, void *data)
{
- if (lp->step && lp->status != 0)
+ /* We do not focus on software watchpoints as we would not catch
+ STEPPING_PAST_SINGLESTEP_BREAKPOINT breakpoints in some other thread
+ as they would remain pending due to `Push back breakpoint for %s'. */
+ if (lp->step == RESUME_STEP_USER && lp->status != 0)
return 1;
else
return 0;
Index: gdb-6.8cvs20080219/gdb/linux-nat.h
===================================================================
--- gdb-6.8cvs20080219.orig/gdb/linux-nat.h 2008-02-14 23:03:58.000000000 +0100
+++ gdb-6.8cvs20080219/gdb/linux-nat.h 2008-02-19 14:15:01.000000000 +0100
@@ -55,8 +55,8 @@ struct lwp_info
/* If non-zero, a pending wait status. */
int status;
- /* Non-zero if we were stepping this LWP. */
- int step;
+ /* The kind of stepping of this LWP. */
+ enum resume_step step;
/* Non-zero si_signo if this LWP stopped with a trap. si_addr may
be the address of a hardware watchpoint. */
Reference in New Issue View Git Blame Copy Permalink