gdb/gdb-readline-6.0-signal.patch

649 lines
18 KiB
Diff
Raw Normal View History

2010-01-12 22:15:57 +00:00
http://sourceware.org/ml/gdb-patches/2009-11/msg00596.html
Subject: [gdb FYI-patch] callback-mode readline-6.0 regression
Hi Chet,
FSF GDB currently ships bundled with readline-5.2 which works fine.
But using --with-system-readline and readline-6.0-patchlevel4 has
a regression:
readline-5.2: Run `gdb -nx -q' and type CTRL-C:
(gdb) Quit
(gdb) _
readline-6.0: Run `gdb -nx -q' and type CTRL-C:
(gdb) _
= nothing happens (it gets buffered and executed later)
(It does also FAIL on gdb.gdb/selftest.exp.)
It is because GDB waits in its own poll() mainloop and readline uses via
rl_callback_handler_install and rl_callback_handler_remove. This way the
readline internal variable _rl_interrupt_immediately remains 0 and CTRL-C gets
only stored to _rl_caught_signal but not executed.
Seen in rl_signal_handler even if _rl_interrupt_immediately is set and
_rl_handle_signal is called then the signal is still stored to
_rl_caught_signal. In the _rl_interrupt_immediately case it should not be
stored when it was already processed.
rl_signal_handler does `_rl_interrupt_immediately = 0;' - while I am not aware
of its meaning it breaks the nest-counting of other routines which do
`_rl_interrupt_immediately++;' and `_rl_interrupt_immediately--;' possibly
creating problematic `_rl_interrupt_immediately == -1'.
`_rl_interrupt_immediately' is an internal variable, how it could be accessed
by a readline application? (OK, maybe it should not be used.)
Attaching a current GDB-side patch but it must access readline internal
variable _rl_caught_signal and it is generally just a workaround. Could you
please include support for signals in this asynchronous mode in readline-6.1?
I find it would be enough to make RL_CHECK_SIGNALS public?
GDB: No regressions on {x86_64,x86_64-m32,i686}-fedora12-linux-gnu.
But this is not a patch intended to be accepted.
Thanks,
Jan
gdb/
2009-11-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* config.in, configure: Regenerate.
* configure.ac (for readline_echoing_p): Move inside $LIBS change.
(for _rl_caught_signal): New.
* event-loop.c: Include readline/readline.h.
(gdb_do_one_event) [HAVE_READLINE_CAUGHT_SIGNAL]: New.
gdb/testsuite/
2009-11-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.gdb/selftest.exp (backtrace through signal handler): Move before
SIGINT pass, drop the timeout case.
(send SIGINT signal to child process): Use gdb_test.
(backtrace through readline handler): New.
Index: gdb-7.0.50.20100115/gdb/config.in
===================================================================
--- gdb-7.0.50.20100115.orig/gdb/config.in 2010-01-15 12:48:04.000000000 +0100
+++ gdb-7.0.50.20100115/gdb/config.in 2010-01-15 12:48:40.000000000 +0100
@@ -359,6 +359,9 @@
2010-01-12 22:15:57 +00:00
/* Define if Python interpreter is being linked in. */
#undef HAVE_PYTHON
+/* readline-6.0 workaround of blocked signals. */
+#undef HAVE_READLINE_CAUGHT_SIGNAL
+
/* Define to 1 if you have the `realpath' function. */
#undef HAVE_REALPATH
Index: gdb-7.0.50.20100115/gdb/configure.ac
===================================================================
--- gdb-7.0.50.20100115.orig/gdb/configure.ac 2010-01-15 12:48:04.000000000 +0100
+++ gdb-7.0.50.20100115/gdb/configure.ac 2010-01-15 12:48:40.000000000 +0100
@@ -777,17 +777,25 @@ if test "$with_system_readline" = yes; t
2010-01-12 22:15:57 +00:00
# readline-6.0 started to use the name `_rl_echoing_p'.
# `$(READLINE_DIR)/' of bundled readline would not resolve in configure.
- AC_MSG_CHECKING([for readline_echoing_p])
save_LIBS=$LIBS
LIBS="$LIBS $READLINE"
+ AC_MSG_CHECKING([for readline_echoing_p])
AC_LINK_IFELSE(AC_LANG_PROGRAM(,[[extern int readline_echoing_p;
return readline_echoing_p;]]),
[READLINE_ECHOING_P=yes],
[READLINE_ECHOING_P=no
AC_DEFINE([readline_echoing_p], [_rl_echoing_p],
[readline-6.0 started to use different name.])])
- LIBS="$save_LIBS"
AC_MSG_RESULT([$READLINE_ECHOING_P])
+ AC_MSG_CHECKING([for _rl_caught_signal])
+ AC_LINK_IFELSE(AC_LANG_PROGRAM(,[[extern int volatile _rl_caught_signal;
+ return _rl_caught_signal;]]),
+ [READLINE_CAUGHT_SIGNAL=yes
+ AC_DEFINE([HAVE_READLINE_CAUGHT_SIGNAL],,
+ [readline-6.0 workaround of blocked signals.])],
+ [READLINE_CAUGHT_SIGNAL=no])
+ AC_MSG_RESULT([$READLINE_CAUGHT_SIGNAL])
+ LIBS="$save_LIBS"
else
READLINE='$(READLINE_DIR)/libreadline.a'
READLINE_DEPS='$(READLINE)'
Index: gdb-7.0.50.20100115/gdb/event-loop.c
===================================================================
--- gdb-7.0.50.20100115.orig/gdb/event-loop.c 2010-01-01 08:31:31.000000000 +0100
+++ gdb-7.0.50.20100115/gdb/event-loop.c 2010-01-15 12:48:40.000000000 +0100
2010-01-12 22:15:57 +00:00
@@ -37,6 +37,7 @@
#include "exceptions.h"
#include "gdb_assert.h"
#include "gdb_select.h"
+#include "readline/readline.h"
/* Data point to pass to the event handler. */
typedef union event_data
@@ -411,6 +412,9 @@ gdb_do_one_event (void *data)
static int event_source_head = 0;
const int number_of_sources = 3;
int current = 0;
+#ifdef HAVE_READLINE_CAUGHT_SIGNAL
+ extern int volatile _rl_caught_signal;
+#endif
/* Any events already waiting in the queue? */
if (process_event ())
@@ -455,6 +459,16 @@ gdb_do_one_event (void *data)
if (gdb_wait_for_event (1) < 0)
return -1;
+#ifdef HAVE_READLINE_CAUGHT_SIGNAL
+ if (async_command_editing_p && RL_ISSTATE (RL_STATE_CALLBACK)
+ && _rl_caught_signal)
+ {
+ /* Call RL_CHECK_SIGNALS this way. */
+ rl_callback_handler_remove ();
+ rl_callback_handler_install (NULL, input_handler);
+ }
+#endif
+
/* Handle any new events occurred while waiting. */
if (process_event ())
return 1;
Index: gdb-7.0.50.20100115/gdb/testsuite/gdb.gdb/selftest.exp
===================================================================
--- gdb-7.0.50.20100115.orig/gdb/testsuite/gdb.gdb/selftest.exp 2010-01-15 12:48:01.000000000 +0100
+++ gdb-7.0.50.20100115/gdb/testsuite/gdb.gdb/selftest.exp 2010-01-15 12:48:40.000000000 +0100
@@ -471,31 +471,42 @@ GDB.*Copyright \[0-9\]+ Free Software Fo
2010-01-12 22:15:57 +00:00
fail "$description (timeout)"
}
}
-
- set description "send SIGINT signal to child process"
- send_gdb "signal SIGINT\n"
- gdb_expect {
- -re "Continuing with signal SIGINT.*$gdb_prompt $" {
+
+ # get a stack trace with the poll function
+ #
+ # This fails on some linux systems for unknown reasons. On the
+ # systems where it fails, sometimes it works fine when run manually.
+ # The testsuite failures may not be limited to just aout systems.
+ setup_xfail "i*86-pc-linuxaout-gnu"
+ set description "backtrace through signal handler"
+ gdb_test_multiple "backtrace" $description {
+ -re "#0.*(read|poll).*in main \\(.*\\) at .*gdb\\.c.*$gdb_prompt $" {
pass "$description"
}
-re ".*$gdb_prompt $" {
+ # On the alpha, we hit the infamous problem about gdb
+ # being unable to get the frame pointer (mentioned in
+ # gdb/README). As it is intermittent, there is no way to
+ # XFAIL it which will give us an XPASS if the problem goes
+ # away.
+ setup_xfail "alpha*-*-osf*"
fail "$description"
}
- timeout {
- fail "$description (timeout)"
- }
}
- # get a stack trace
+ gdb_test "signal SIGINT" "Continuing with signal SIGINT.*" \
+ "send SIGINT signal to child process"
+
+ # get a stack trace being redelivered by readline
#
# This fails on some linux systems for unknown reasons. On the
# systems where it fails, sometimes it works fine when run manually.
# The testsuite failures may not be limited to just aout systems.
+ # Optional system readline may not have symbols to be shown.
setup_xfail "i*86-pc-linuxaout-gnu"
- set description "backtrace through signal handler"
- send_gdb "backtrace\n"
- gdb_expect {
- -re "#0.*(read|poll).*in main \\(.*\\) at .*gdb\\.c.*$gdb_prompt $" {
+ set description "backtrace through readline handler"
+ gdb_test_multiple "backtrace" $description {
+ -re "#0.*gdb_do_one_event.*in main \\(.*\\) at .*gdb\\.c.*$gdb_prompt $" {
pass "$description"
}
-re ".*$gdb_prompt $" {
@@ -507,9 +518,6 @@ GDB.*Copyright \[0-9\]+ Free Software Fo
2010-01-12 22:15:57 +00:00
setup_xfail "alpha*-*-osf*"
fail "$description"
}
- timeout {
- fail "$description (timeout)"
- }
}
Index: gdb-7.0.50.20100115/gdb/configure
===================================================================
--- gdb-7.0.50.20100115.orig/gdb/configure 2010-01-15 12:48:04.000000000 +0100
+++ gdb-7.0.50.20100115/gdb/configure 2010-01-15 12:48:46.000000000 +0100
@@ -6772,6 +6772,185 @@ else
fi
+
+
+
+
+# Check whether --with-separate-debug-dir was given.
+if test "${with_separate_debug_dir+set}" = set; then :
+ withval=$with_separate_debug_dir;
+ DEBUGDIR=$withval
+else
+ DEBUGDIR=${libdir}/debug
+fi
+
+
+ test "x$prefix" = xNONE && prefix="$ac_default_prefix"
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+ ac_define_dir=`eval echo $DEBUGDIR`
+ ac_define_dir=`eval echo $ac_define_dir`
+
+cat >>confdefs.h <<_ACEOF
+#define DEBUGDIR "$ac_define_dir"
+_ACEOF
+
+
+
+ if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+ else
+ test_prefix=$exec_prefix
+ fi
+ value=0
+ case ${ac_define_dir} in
+ "${test_prefix}"|"${test_prefix}/"*|\
+ '${exec_prefix}'|'${exec_prefix}/'*)
+ value=1
+ ;;
+ esac
+
+cat >>confdefs.h <<_ACEOF
+#define DEBUGDIR_RELOCATABLE $value
+_ACEOF
+
+
+
+# GDB's datadir relocation
+
+
+
+# Check whether --with-gdb-datadir was given.
+if test "${with_gdb_datadir+set}" = set; then :
+ withval=$with_gdb_datadir;
+ GDB_DATADIR=$withval
+else
+ GDB_DATADIR=${datadir}/gdb
+fi
+
+
+ test "x$prefix" = xNONE && prefix="$ac_default_prefix"
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+ ac_define_dir=`eval echo $GDB_DATADIR`
+ ac_define_dir=`eval echo $ac_define_dir`
+
+cat >>confdefs.h <<_ACEOF
+#define GDB_DATADIR "$ac_define_dir"
+_ACEOF
+
+
+
+ if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+ else
+ test_prefix=$exec_prefix
+ fi
+ value=0
+ case ${ac_define_dir} in
+ "${test_prefix}"|"${test_prefix}/"*|\
+ '${exec_prefix}'|'${exec_prefix}/'*)
+ value=1
+ ;;
+ esac
+
+cat >>confdefs.h <<_ACEOF
+#define GDB_DATADIR_RELOCATABLE $value
+_ACEOF
+
+
+
+
+# Check whether --with-relocated-sources was given.
+if test "${with_relocated_sources+set}" = set; then :
+ withval=$with_relocated_sources; reloc_srcdir="${withval}"
+
+ test "x$prefix" = xNONE && prefix="$ac_default_prefix"
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+ ac_define_dir=`eval echo $reloc_srcdir`
+ ac_define_dir=`eval echo $ac_define_dir`
+
+cat >>confdefs.h <<_ACEOF
+#define RELOC_SRCDIR "$ac_define_dir"
+_ACEOF
+
+
+
+fi
+
+
+# GDB's datadir relocation
+
+gdbdatadir=${datadir}/gdb
+
+
+# Check whether --with-gdb-datadir was given.
+if test "${with_gdb_datadir+set}" = set; then :
+ withval=$with_gdb_datadir; gdbdatadir="${withval}"
+fi
+
+
+
+ test "x$prefix" = xNONE && prefix="$ac_default_prefix"
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+ ac_define_dir=`eval echo $gdbdatadir`
+ ac_define_dir=`eval echo $ac_define_dir`
+
+cat >>confdefs.h <<_ACEOF
+#define GDB_DATADIR "$ac_define_dir"
+_ACEOF
+
+
+
+if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+else
+ test_prefix=$exec_prefix
+fi
+
+case ${gdbdatadir} in
+ "${test_prefix}"|"${test_prefix}/"*|\
+ '${exec_prefix}'|'${exec_prefix}/'*)
+
+$as_echo "#define GDB_DATADIR_RELOCATABLE 1" >>confdefs.h
+
+ ;;
+esac
+GDB_DATADIR_PATH=${gdbdatadir}
+
+
+
+# Check whether --with-pythondir was given.
+if test "${with_pythondir+set}" = set; then :
+ withval=$with_pythondir; pythondir="${withval}"
+else
+ pythondir=no
+fi
+
+
+# If the user passed in a path, define it. Otherwise, compute it at
+# runtime based on the possibly-relocatable datadir.
+if test "$pythondir" = "no"; then
+ pythondir='$(GDB_DATADIR_PATH)/python'
+else
+
+cat >>confdefs.h <<_ACEOF
+#define PYTHONDIR "$pythondir"
+_ACEOF
+
+fi
+
+
# Integration with rpm library to support missing debuginfo suggestions.
# --without-rpm: Disable any rpm support.
# --with-rpm=libname.so: Try to dynamically open `libname.so' during runtime.
@@ -7255,185 +7434,6 @@ fi
-
-# Check whether --with-separate-debug-dir was given.
-if test "${with_separate_debug_dir+set}" = set; then :
- withval=$with_separate_debug_dir;
- DEBUGDIR=$withval
-else
- DEBUGDIR=${libdir}/debug
-fi
-
-
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $DEBUGDIR`
- ac_define_dir=`eval echo $ac_define_dir`
-
-cat >>confdefs.h <<_ACEOF
-#define DEBUGDIR "$ac_define_dir"
-_ACEOF
-
-
-
- if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
- else
- test_prefix=$exec_prefix
- fi
- value=0
- case ${ac_define_dir} in
- "${test_prefix}"|"${test_prefix}/"*|\
- '${exec_prefix}'|'${exec_prefix}/'*)
- value=1
- ;;
- esac
-
-cat >>confdefs.h <<_ACEOF
-#define DEBUGDIR_RELOCATABLE $value
-_ACEOF
-
-
-
-# GDB's datadir relocation
-
-
-
-# Check whether --with-gdb-datadir was given.
-if test "${with_gdb_datadir+set}" = set; then :
- withval=$with_gdb_datadir;
- GDB_DATADIR=$withval
-else
- GDB_DATADIR=${datadir}/gdb
-fi
-
-
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $GDB_DATADIR`
- ac_define_dir=`eval echo $ac_define_dir`
-
-cat >>confdefs.h <<_ACEOF
-#define GDB_DATADIR "$ac_define_dir"
-_ACEOF
-
-
-
- if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
- else
- test_prefix=$exec_prefix
- fi
- value=0
- case ${ac_define_dir} in
- "${test_prefix}"|"${test_prefix}/"*|\
- '${exec_prefix}'|'${exec_prefix}/'*)
- value=1
- ;;
- esac
-
-cat >>confdefs.h <<_ACEOF
-#define GDB_DATADIR_RELOCATABLE $value
-_ACEOF
-
-
-
-
-# Check whether --with-relocated-sources was given.
-if test "${with_relocated_sources+set}" = set; then :
- withval=$with_relocated_sources; reloc_srcdir="${withval}"
-
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $reloc_srcdir`
- ac_define_dir=`eval echo $ac_define_dir`
-
-cat >>confdefs.h <<_ACEOF
-#define RELOC_SRCDIR "$ac_define_dir"
-_ACEOF
-
-
-
-fi
-
-
-# GDB's datadir relocation
-
-gdbdatadir=${datadir}/gdb
-
-
-# Check whether --with-gdb-datadir was given.
-if test "${with_gdb_datadir+set}" = set; then :
- withval=$with_gdb_datadir; gdbdatadir="${withval}"
-fi
-
-
-
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $gdbdatadir`
- ac_define_dir=`eval echo $ac_define_dir`
-
-cat >>confdefs.h <<_ACEOF
-#define GDB_DATADIR "$ac_define_dir"
-_ACEOF
-
-
-
-if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
-else
- test_prefix=$exec_prefix
-fi
-
-case ${gdbdatadir} in
- "${test_prefix}"|"${test_prefix}/"*|\
- '${exec_prefix}'|'${exec_prefix}/'*)
-
-$as_echo "#define GDB_DATADIR_RELOCATABLE 1" >>confdefs.h
-
- ;;
-esac
-GDB_DATADIR_PATH=${gdbdatadir}
-
-
-
-# Check whether --with-pythondir was given.
-if test "${with_pythondir+set}" = set; then :
- withval=$with_pythondir; pythondir="${withval}"
-else
- pythondir=no
-fi
-
-
-# If the user passed in a path, define it. Otherwise, compute it at
-# runtime based on the possibly-relocatable datadir.
-if test "$pythondir" = "no"; then
- pythondir='$(GDB_DATADIR_PATH)/python'
-else
-
-cat >>confdefs.h <<_ACEOF
-#define PYTHONDIR "$pythondir"
-_ACEOF
-
-fi
-
-
-
-
-
subdirs="$subdirs doc testsuite"
@@ -9290,10 +9290,10 @@ if test "$with_system_readline" = yes; t
2010-01-12 22:15:57 +00:00
# readline-6.0 started to use the name `_rl_echoing_p'.
# `$(READLINE_DIR)/' of bundled readline would not resolve in configure.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for readline_echoing_p" >&5
-$as_echo_n "checking for readline_echoing_p... " >&6; }
2010-01-12 22:15:57 +00:00
save_LIBS=$LIBS
LIBS="$LIBS $READLINE"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for readline_echoing_p" >&5
+$as_echo_n "checking for readline_echoing_p... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
2010-01-12 22:15:57 +00:00
/* end confdefs.h. */
@@ -9316,9 +9316,35 @@ $as_echo "#define readline_echoing_p _rl
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LIBS="$save_LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINE_ECHOING_P" >&5
$as_echo "$READLINE_ECHOING_P" >&6; }
2010-01-12 22:15:57 +00:00
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _rl_caught_signal" >&5
+$as_echo_n "checking for _rl_caught_signal... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
2010-01-12 22:15:57 +00:00
+int
+main ()
+{
+extern int volatile _rl_caught_signal;
+ return _rl_caught_signal;
+ ;
+ return 0;
+}
+_ACEOF
2010-01-12 22:15:57 +00:00
+if ac_fn_c_try_link "$LINENO"; then :
+ READLINE_CAUGHT_SIGNAL=yes
+
+$as_echo "#define HAVE_READLINE_CAUGHT_SIGNAL /**/" >>confdefs.h
+
2010-01-12 22:15:57 +00:00
+else
+ READLINE_CAUGHT_SIGNAL=no
+fi
2010-01-12 22:15:57 +00:00
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINE_CAUGHT_SIGNAL" >&5
+$as_echo "$READLINE_CAUGHT_SIGNAL" >&6; }
+ LIBS="$save_LIBS"
2010-01-12 22:15:57 +00:00
else
READLINE='$(READLINE_DIR)/libreadline.a'
READLINE_DEPS='$(READLINE)'