rpms/gcc
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9ca88bbdad
gcc/gcc41-pr24036-revert.patch
Jakub Jelinek ec5ba4b332 4.1.1-49
2007-01-02 19:30:19 +00:00

303 lines
12 KiB
Diff
Raw Blame History

2006-12-21 Jakub Jelinek <jakub@redhat.com>
Revert:
2006-12-16 Joseph Myers <joseph@codesourcery.com>
David Edelsohn <edelsohn@gnu.org>
PR target/24036
* doc/tm.texi (HARD_REGNO_NREGS_HAS_PADDING,
HARD_REGNO_NREGS_WITH_PADDING): Document new target macros.
* defaults.h (HARD_REGNO_NREGS_HAS_PADDING,
HARD_REGNO_NREGS_WITH_PADDING): Define.
* config/i386/i386.h (HARD_REGNO_NREGS_HAS_PADDING,
HARD_REGNO_NREGS_WITH_PADDING): Define.
* rtlanal.c (subreg_regno_offset, subreg_offset_representable_p):
Use new macros to detect modes with holes; do not look at integer
units.
(subreg_offset_representable_p): Check for and disallow cases
where the modes use different numbers of bits from registers.
* config/rs6000/rs6000.c (rs6000_emit_move): Handle TFmode
constant for soft-float.
(rs6000_hard_regno_nregs): Use UNITS_PER_FP_WORD for e500 GPRs
containing doubles.
(rs6000_split_multireg_move): Use DFmode reg_mode for TFmode moves
in E500 double case.
* config/rs6000/rs6000.md (movtf): Allow soft-float.
(movtf_softfloat): New.
--- gcc/doc/tm.texi (revision 119967)
+++ gcc/doc/tm.texi (revision 119966)
@@ -1937,33 +1937,6 @@ definition of this macro is
@end smallexample
@end defmac
-@defmac HARD_REGNO_NREGS_HAS_PADDING (@var{regno}, @var{mode})
-A C expression that is nonzero if a value of mode @var{mode}, stored
-in memory, ends with padding that causes it to take up more space than
-in registers starting at register number @var{regno} (as determined by
-multiplying GCC's notion of the size of the register when containing
-this mode by the number of registers returned by
-@code{HARD_REGNO_NREGS}). By default this is zero.
-
-For example, if a floating-point value is stored in three 32-bit
-registers but takes up 128 bits in memory, then this would be
-nonzero.
-
-This macros only needs to be defined if there are cases where
-@code{subreg_regno_offset} and @code{subreg_offset_representable_p}
-would otherwise wrongly determine that a @code{subreg} can be
-represented by an offset to the register number, when in fact such a
-@code{subreg} would contain some of the padding not stored in
-registers and so not be representable.
-@end defmac
-
-@defmac HARD_REGNO_NREGS_WITH_PADDING (@var{regno}, @var{mode})
-For values of @var{regno} and @var{mode} for which
-@code{HARD_REGNO_NREGS_HAS_PADDING} returns nonzero, a C expression
-returning the greater number of registers required to hold the value
-including any padding. In the example above, the value would be four.
-@end defmac
-
@defmac REGMODE_NATURAL_SIZE (@var{mode})
Define this macro if the natural size of registers that hold values
of mode @var{mode} is not the word size. It is a C expression that
--- gcc/defaults.h (revision 119967)
+++ gcc/defaults.h (revision 119966)
@@ -867,9 +867,4 @@ Software Foundation, 51 Franklin Street,
#define INCOMING_FRAME_SP_OFFSET 0
#endif
-#ifndef HARD_REGNO_NREGS_HAS_PADDING
-#define HARD_REGNO_NREGS_HAS_PADDING(REGNO, MODE) 0
-#define HARD_REGNO_NREGS_WITH_PADDING(REGNO, MODE) -1
-#endif
-
#endif /* ! GCC_DEFAULTS_H */
--- gcc/rtlanal.c (revision 119967)
+++ gcc/rtlanal.c (revision 119966)
@@ -3138,15 +3138,34 @@ unsigned int
subreg_regno_offset (unsigned int xregno, enum machine_mode xmode,
unsigned int offset, enum machine_mode ymode)
{
- int nregs_xmode, nregs_ymode;
+ int nregs_xmode, nregs_ymode, nregs_xmode_unit_int;
int mode_multiple, nregs_multiple;
int y_offset;
+ enum machine_mode xmode_unit, xmode_unit_int;
gcc_assert (xregno < FIRST_PSEUDO_REGISTER);
+ if (GET_MODE_INNER (xmode) == VOIDmode)
+ xmode_unit = xmode;
+ else
+ xmode_unit = GET_MODE_INNER (xmode);
+
+ if (FLOAT_MODE_P (xmode_unit))
+ {
+ xmode_unit_int = int_mode_for_mode (xmode_unit);
+ if (xmode_unit_int == BLKmode)
+ /* It's probably bad to be here; a port should have an integer mode
+ that's the same size as anything of which it takes a SUBREG. */
+ xmode_unit_int = xmode_unit;
+ }
+ else
+ xmode_unit_int = xmode_unit;
+
+ nregs_xmode_unit_int = hard_regno_nregs[xregno][xmode_unit_int];
+
/* Adjust nregs_xmode to allow for 'holes'. */
- if (HARD_REGNO_NREGS_HAS_PADDING (xregno, xmode))
- nregs_xmode = HARD_REGNO_NREGS_WITH_PADDING (xregno, xmode);
+ if (nregs_xmode_unit_int != hard_regno_nregs[xregno][xmode_unit])
+ nregs_xmode = nregs_xmode_unit_int * GET_MODE_NUNITS (xmode);
else
nregs_xmode = hard_regno_nregs[xregno][xmode];
@@ -3184,31 +3203,38 @@ bool
subreg_offset_representable_p (unsigned int xregno, enum machine_mode xmode,
unsigned int offset, enum machine_mode ymode)
{
- int nregs_xmode, nregs_ymode;
+ int nregs_xmode, nregs_ymode, nregs_xmode_unit, nregs_xmode_unit_int;
int mode_multiple, nregs_multiple;
int y_offset;
- int regsize_xmode, regsize_ymode;
+ enum machine_mode xmode_unit, xmode_unit_int;
gcc_assert (xregno < FIRST_PSEUDO_REGISTER);
+ if (GET_MODE_INNER (xmode) == VOIDmode)
+ xmode_unit = xmode;
+ else
+ xmode_unit = GET_MODE_INNER (xmode);
+
+ if (FLOAT_MODE_P (xmode_unit))
+ {
+ xmode_unit_int = int_mode_for_mode (xmode_unit);
+ if (xmode_unit_int == BLKmode)
+ /* It's probably bad to be here; a port should have an integer mode
+ that's the same size as anything of which it takes a SUBREG. */
+ xmode_unit_int = xmode_unit;
+ }
+ else
+ xmode_unit_int = xmode_unit;
+
+ nregs_xmode_unit = hard_regno_nregs[xregno][xmode_unit];
+ nregs_xmode_unit_int = hard_regno_nregs[xregno][xmode_unit_int];
+
/* If there are holes in a non-scalar mode in registers, we expect
that it is made up of its units concatenated together. */
- if (HARD_REGNO_NREGS_HAS_PADDING (xregno, xmode))
+ if (nregs_xmode_unit != nregs_xmode_unit_int)
{
- enum machine_mode xmode_unit;
-
- nregs_xmode = HARD_REGNO_NREGS_WITH_PADDING (xregno, xmode);
- if (GET_MODE_INNER (xmode) == VOIDmode)
- xmode_unit = xmode;
- else
- xmode_unit = GET_MODE_INNER (xmode);
- gcc_assert (HARD_REGNO_NREGS_HAS_PADDING (xregno, xmode_unit));
- gcc_assert (nregs_xmode
- == (GET_MODE_NUNITS (xmode)
- * HARD_REGNO_NREGS_WITH_PADDING (xregno, xmode_unit)));
- gcc_assert (hard_regno_nregs[xregno][xmode]
- == (hard_regno_nregs[xregno][xmode_unit]
- * GET_MODE_NUNITS (xmode)));
+ gcc_assert (nregs_xmode_unit * GET_MODE_NUNITS (xmode)
+ == hard_regno_nregs[xregno][xmode]);
/* You can only ask for a SUBREG of a value with holes in the middle
if you don't cross the holes. (Such a SUBREG should be done by
@@ -3218,12 +3244,15 @@ subreg_offset_representable_p (unsigned
3 for each part, but in memory it's two 128-bit parts.
Padding is assumed to be at the end (not necessarily the 'high part')
of each unit. */
- if ((offset / GET_MODE_SIZE (xmode_unit) + 1
- < GET_MODE_NUNITS (xmode))
- && (offset / GET_MODE_SIZE (xmode_unit)
+ if (nregs_xmode_unit != nregs_xmode_unit_int
+ && (offset / GET_MODE_SIZE (xmode_unit_int) + 1
+ < GET_MODE_NUNITS (xmode))
+ && (offset / GET_MODE_SIZE (xmode_unit_int)
!= ((offset + GET_MODE_SIZE (ymode) - 1)
- / GET_MODE_SIZE (xmode_unit))))
+ / GET_MODE_SIZE (xmode_unit_int))))
return false;
+
+ nregs_xmode = nregs_xmode_unit_int * GET_MODE_NUNITS (xmode);
}
else
nregs_xmode = hard_regno_nregs[xregno][xmode];
@@ -3237,15 +3266,6 @@ subreg_offset_representable_p (unsigned
? WORDS_BIG_ENDIAN : BYTES_BIG_ENDIAN))
return true;
- /* If registers store different numbers of bits in the different
- modes, we cannot generally form this subreg. */
- regsize_xmode = GET_MODE_SIZE (xmode) / nregs_xmode;
- regsize_ymode = GET_MODE_SIZE (ymode) / nregs_ymode;
- if (regsize_xmode > regsize_ymode && nregs_ymode > 1)
- return false;
- if (regsize_ymode > regsize_xmode && nregs_xmode > 1)
- return false;
-
/* Lowpart subregs are otherwise valid. */
if (offset == subreg_lowpart_offset (ymode, xmode))
return true;
--- gcc/config/i386/i386.h (revision 119967)
+++ gcc/config/i386/i386.h (revision 119966)
@@ -827,15 +827,6 @@ do { \
? (TARGET_64BIT ? 4 : 6) \
: ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)))
-#define HARD_REGNO_NREGS_HAS_PADDING(REGNO, MODE) \
- ((TARGET_128BIT_LONG_DOUBLE && !TARGET_64BIT) \
- ? (FP_REGNO_P (REGNO) || SSE_REGNO_P (REGNO) || MMX_REGNO_P (REGNO) \
- ? 0 \
- : ((MODE) == XFmode || (MODE) == XCmode)) \
- : 0)
-
-#define HARD_REGNO_NREGS_WITH_PADDING(REGNO, MODE) ((MODE) == XFmode ? 4 : 8)
-
#define VALID_SSE2_REG_MODE(MODE) \
((MODE) == V16QImode || (MODE) == V8HImode || (MODE) == V2DFmode \
|| (MODE) == V2DImode || (MODE) == DFmode)
--- gcc/config/rs6000/rs6000.c (revision 119967)
+++ gcc/config/rs6000/rs6000.c (revision 119966)
@@ -3573,6 +3573,9 @@ rs6000_hard_regno_nregs (int regno, enum
if (FP_REGNO_P (regno))
return (GET_MODE_SIZE (mode) + UNITS_PER_FP_WORD - 1) / UNITS_PER_FP_WORD;
+ if (TARGET_E500_DOUBLE && mode == DFmode)
+ return 1;
+
if (SPE_SIMD_REGNO_P (regno) && TARGET_SPE && SPE_VECTOR_MODE (mode))
return (GET_MODE_SIZE (mode) + UNITS_PER_SPE_WORD - 1) / UNITS_PER_SPE_WORD;
@@ -3580,14 +3583,6 @@ rs6000_hard_regno_nregs (int regno, enum
return
(GET_MODE_SIZE (mode) + UNITS_PER_ALTIVEC_WORD - 1) / UNITS_PER_ALTIVEC_WORD;
- /* The value returned for SCmode in the E500 double case is 2 for
- ABI compatibility; storing an SCmode value in a single register
- would require function_arg and rs6000_spe_function_arg to handle
- SCmode so as to pass the value correctly in a pair of
- registers. */
- if (TARGET_E500_DOUBLE && FLOAT_MODE_P (mode) && mode != SCmode)
- return (GET_MODE_SIZE (mode) + UNITS_PER_FP_WORD - 1) / UNITS_PER_FP_WORD;
-
return (GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD;
}
@@ -3956,7 +3951,8 @@ rs6000_emit_move (rtx dest, rtx source,
/* 128-bit constant floating-point values on Darwin should really be
loaded as two parts. */
- if (!TARGET_IEEEQUAD && TARGET_LONG_DOUBLE_128
+ if (!TARGET_IEEEQUAD
+ && TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_LONG_DOUBLE_128
&& mode == TFmode && GET_CODE (operands[1]) == CONST_DOUBLE)
{
/* DImode is used, not DFmode, because simplify_gen_subreg doesn't
@@ -12402,8 +12398,6 @@ rs6000_split_multireg_move (rtx dst, rtx
reg_mode = DFmode;
else if (ALTIVEC_REGNO_P (reg))
reg_mode = V16QImode;
- else if (TARGET_E500_DOUBLE && mode == TFmode)
- reg_mode = DFmode;
else
reg_mode = word_mode;
reg_mode_size = GET_MODE_SIZE (reg_mode);
--- gcc/config/rs6000/rs6000.md (revision 119967)
+++ gcc/config/rs6000/rs6000.md (revision 119966)
@@ -7789,7 +7789,8 @@ (define_insn "*movdf_softfloat64"
(define_expand "movtf"
[(set (match_operand:TF 0 "general_operand" "")
(match_operand:TF 1 "any_operand" ""))]
- "!TARGET_IEEEQUAD && TARGET_LONG_DOUBLE_128"
+ "!TARGET_IEEEQUAD
+ && TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_LONG_DOUBLE_128"
"{ rs6000_emit_move (operands[0], operands[1], TFmode); DONE; }")
; It's important to list the o->f and f->o moves before f->f because
@@ -7808,19 +7809,6 @@ (define_insn_and_split "*movtf_internal"
{ rs6000_split_multireg_move (operands[0], operands[1]); DONE; }
[(set_attr "length" "8,8,8,20,20,16")])
-(define_insn_and_split "*movtf_softfloat"
- [(set (match_operand:TF 0 "nonimmediate_operand" "=r,Y,r")
- (match_operand:TF 1 "input_operand" "YGHF,r,r"))]
- "!TARGET_IEEEQUAD
- && (TARGET_SOFT_FLOAT || !TARGET_FPRS) && TARGET_LONG_DOUBLE_128
- && (gpc_reg_operand (operands[0], TFmode)
- || gpc_reg_operand (operands[1], TFmode))"
- "#"
- "&& reload_completed"
- [(pc)]
-{ rs6000_split_multireg_move (operands[0], operands[1]); DONE; }
- [(set_attr "length" "20,20,16")])
-
(define_expand "extenddftf2"
[(parallel [(set (match_operand:TF 0 "nonimmediate_operand" "")
(float_extend:TF (match_operand:DF 1 "input_operand" "")))
Reference in New Issue View Git Blame Copy Permalink