exim/exim-4.94.2-config.patch
Jaroslav Škarvada f3c8bb48f9 New version
Resolves: rhbz#1956859
2021-05-04 19:40:58 +02:00

815 lines
29 KiB
Diff

diff --git a/scripts/Configure-Makefile b/scripts/Configure-Makefile
index 61368ec..e8fe9ef 100755
--- a/scripts/Configure-Makefile
+++ b/scripts/Configure-Makefile
@@ -297,7 +297,7 @@ if [ "${EXIM_PERL}" != "" ] ; then
mv $mft $mftt
echo "PERL_CC=`$PERL_COMMAND -MConfig -e 'print $Config{cc}'`" >>$mft
- echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts`" >>$mft
+ echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts` \$(CFLAGS)" >>$mft
echo "PERL_LIBS=`$PERL_COMMAND -MExtUtils::Embed -e ldopts`" >>$mft
echo "" >>$mft
cat $mftt >> $mft
diff --git a/src/EDITME b/src/EDITME
index 8da36a3..9b7682c 100644
--- a/src/EDITME
+++ b/src/EDITME
@@ -99,7 +99,7 @@
# /usr/local/sbin. The installation script will try to create this directory,
# and any superior directories, if they do not exist.
-BIN_DIRECTORY=/usr/exim/bin
+BIN_DIRECTORY=/usr/sbin
#------------------------------------------------------------------------------
@@ -115,7 +115,7 @@ BIN_DIRECTORY=/usr/exim/bin
# don't exist. It will also install a default runtime configuration if this
# file does not exist.
-CONFIGURE_FILE=/usr/exim/configure
+CONFIGURE_FILE=/etc/exim/exim.conf
# It is possible to specify a colon-separated list of files for CONFIGURE_FILE.
# In this case, Exim will use the first of them that exists when it is run.
@@ -132,7 +132,7 @@ CONFIGURE_FILE=/usr/exim/configure
# deliveries. (Local deliveries run as various non-root users, typically as the
# owner of a local mailbox.) Specifying these values as root is not supported.
-EXIM_USER=
+EXIM_USER=93
# If you specify EXIM_USER as a name, this is looked up at build time, and the
# uid number is built into the binary. However, you can specify that this
@@ -153,7 +153,7 @@ EXIM_USER=
# for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless
# you want to use a group other than the default group for the given user.
-# EXIM_GROUP=
+EXIM_GROUP=93
# Many sites define a user called "exim", with an appropriate default group,
# and use
@@ -210,10 +210,10 @@ SPOOL_DIRECTORY=/var/spool/exim
# If you are buliding with TLS, the library configuration must be done:
# Uncomment this if you are using OpenSSL
-# USE_OPENSSL=yes
+USE_OPENSSL=yes
# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
# and an optional location.
-# USE_OPENSSL_PC=openssl
+USE_OPENSSL_PC=openssl
# TLS_LIBS=-lssl -lcrypto
# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
@@ -337,7 +337,7 @@ TRANSPORT_SMTP=yes
# This one is special-purpose, and commonly not required, so it is not
# included by default.
-# TRANSPORT_LMTP=yes
+TRANSPORT_LMTP=yes
#------------------------------------------------------------------------------
@@ -346,9 +346,9 @@ TRANSPORT_SMTP=yes
# MBX, is included only when requested. If you do not know what this is about,
# leave these settings commented out.
-# SUPPORT_MAILDIR=yes
-# SUPPORT_MAILSTORE=yes
-# SUPPORT_MBX=yes
+SUPPORT_MAILDIR=yes
+SUPPORT_MAILSTORE=yes
+SUPPORT_MBX=yes
#------------------------------------------------------------------------------
@@ -406,20 +406,26 @@ LOOKUP_DBM=yes
LOOKUP_LSEARCH=yes
LOOKUP_DNSDB=yes
-# LOOKUP_CDB=yes
-# LOOKUP_DSEARCH=yes
+LOOKUP_CDB=yes
+LOOKUP_DSEARCH=yes
# LOOKUP_IBASE=yes
# LOOKUP_JSON=yes
-# LOOKUP_LDAP=yes
-# LOOKUP_MYSQL=yes
-# LOOKUP_MYSQL_PC=mariadb
-# LOOKUP_NIS=yes
-# LOOKUP_NISPLUS=yes
+LOOKUP_LDAP=yes
+LDAP_LIB_TYPE=OPENLDAP2
+LOOKUP_LIBS=-lldap -llber -lsqlite3
+LOOKUP_MYSQL=2
+LOOKUP_MYSQL_PC=mariadb
+LOOKUP_NIS=yes
+LOOKUP_NISPLUS=yes
+CFLAGS+=-I/usr/include/nsl -I/usr/include/tirpc
+LIBS+=-L/usr/$(_lib)/nsl
+
# LOOKUP_ORACLE=yes
-# LOOKUP_PASSWD=yes
-# LOOKUP_PGSQL=yes
+LOOKUP_PASSWD=yes
+LOOKUP_PGSQL=2
+LOOKUP_PGSQL_LIBS=-lpq
# LOOKUP_REDIS=yes
-# LOOKUP_SQLITE=yes
+LOOKUP_SQLITE=yes
# LOOKUP_SQLITE_PC=sqlite3
# LOOKUP_WHOSON=yes
@@ -432,7 +438,7 @@ LOOKUP_DNSDB=yes
# Some platforms may need this for LOOKUP_NIS:
-# LIBS += -lnsl
+LIBS += -lnsl
#------------------------------------------------------------------------------
# If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate
@@ -498,7 +504,7 @@ SUPPORT_DANE=yes
# files are defaulted in the OS/Makefile-Default file, but can be overridden in
# local OS-specific make files.
-# EXIM_MONITOR=eximon.bin
+EXIM_MONITOR=eximon.bin
#------------------------------------------------------------------------------
@@ -508,7 +514,7 @@ SUPPORT_DANE=yes
# and the MIME ACL. Please read the documentation to learn more about these
# features.
-# WITH_CONTENT_SCAN=yes
+WITH_CONTENT_SCAN=yes
# If you have content scanning you may wish to only include some of the scanner
# interfaces. Uncomment any of these lines to remove that code.
@@ -595,12 +601,12 @@ DISABLE_MAL_MKS=yes
# Uncomment the following line to add DMARC checking capability, implemented
# using libopendmarc libraries. You must have SPF and DKIM support enabled also.
-# SUPPORT_DMARC=yes
+SUPPORT_DMARC=yes
# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lopendmarc
+LDFLAGS += -lopendmarc
# Uncomment the following if you need to change the default. You can
# override it at runtime (main config option dmarc_tld_file)
-# DMARC_TLD_FILE=/etc/exim/opendmarc.tlds
+DMARC_TLD_FILE=/usr/share/publicsuffix/public_suffix_list.dat
# Uncomment the following line to add ARC (Authenticated Received Chain)
# support. You must have SPF and DKIM support enabled also.
@@ -713,7 +719,7 @@ FIXED_NEVER_USERS=root
# CONFIGURE_OWNER setting, to specify a configuration file which is listed in
# the TRUSTED_CONFIG_LIST file, then root privileges are not dropped by Exim.
-# TRUSTED_CONFIG_LIST=/usr/exim/trusted_configs
+TRUSTED_CONFIG_LIST=/etc/exim/trusted-configs
#------------------------------------------------------------------------------
@@ -758,18 +764,18 @@ FIXED_NEVER_USERS=root
# included in the Exim binary. You will then need to set up the run time
# configuration to make use of the mechanism(s) selected.
-# AUTH_CRAM_MD5=yes
-# AUTH_CYRUS_SASL=yes
-# AUTH_DOVECOT=yes
+AUTH_CRAM_MD5=yes
+AUTH_CYRUS_SASL=yes
+AUTH_DOVECOT=yes
# AUTH_EXTERNAL=yes
-# AUTH_GSASL=yes
-# AUTH_GSASL_PC=libgsasl
+AUTH_GSASL=yes
+AUTH_GSASL_PC=libgsasl
# AUTH_HEIMDAL_GSSAPI=yes
# AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi
# AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi heimdal-krb5
-# AUTH_PLAINTEXT=yes
-# AUTH_SPA=yes
-# AUTH_TLS=yes
+AUTH_PLAINTEXT=yes
+AUTH_SPA=yes
+AUTH_TLS=yes
# Heimdal through 1.5 required pkg-config 'heimdal-gssapi'; Heimdal 7.1
# requires multiple pkg-config files to work with Exim, so the second example
@@ -796,7 +802,7 @@ FIXED_NEVER_USERS=root
# one that is set in the headers_charset option. The default setting is
# defined by this setting:
-HEADERS_CHARSET="ISO-8859-1"
+HEADERS_CHARSET="UTF-8"
# If you are going to make use of $header_xxx expansions in your configuration
# file, or if your users are going to use them in filter files, and the normal
@@ -816,7 +822,7 @@ HEADERS_CHARSET="ISO-8859-1"
# the Sieve filter support. For those OS where iconv() is known to be installed
# as standard, the file in OS/Makefile-xxxx contains
#
-# HAVE_ICONV=yes
+HAVE_ICONV=yes
#
# If you are not using one of those systems, but have installed iconv(), you
# need to uncomment that line above. In some cases, you may find that iconv()
@@ -892,7 +898,7 @@ HEADERS_CHARSET="ISO-8859-1"
# Once you have done this, "make install" will build the info files and
# install them in the directory you have defined.
-# INFO_DIRECTORY=/usr/share/info
+INFO_DIRECTORY=/usr/share/info
#------------------------------------------------------------------------------
@@ -905,7 +911,7 @@ HEADERS_CHARSET="ISO-8859-1"
# %s. This will be replaced by one of the strings "main", "panic", or "reject"
# to form the final file names. Some installations may want something like this:
-# LOG_FILE_PATH=/var/log/exim_%slog
+LOG_FILE_PATH=/var/log/exim/%s.log
# which results in files with names /var/log/exim_mainlog, etc. The directory
# in which the log files are placed must exist; Exim does not try to create
@@ -977,7 +983,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
# Perl costs quite a lot of resources. Only do this if you really need it.
-# EXIM_PERL=perl.o
+EXIM_PERL=perl.o
#------------------------------------------------------------------------------
@@ -987,7 +993,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# that the local_scan API is made available by the linker. You may also need
# to add -ldl to EXTRALIBS so that dlopen() is available to Exim.
-# EXPAND_DLFUNC=yes
+EXPAND_DLFUNC=yes
#------------------------------------------------------------------------------
@@ -997,7 +1003,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# support, which is intended for use in conjunction with the SMTP AUTH
# facilities, is included only when requested by the following setting:
-# SUPPORT_PAM=yes
+SUPPORT_PAM=yes
# You probably need to add -lpam to EXTRALIBS, and in some releases of
# GNU/Linux -ldl is also needed.
@@ -1009,12 +1015,12 @@ ZCAT_COMMAND=/usr/bin/zcat
# If you may want to use outbound (client-side) proxying, using Socks5,
# uncomment the line below.
-# SUPPORT_SOCKS=yes
+SUPPORT_SOCKS=yes
# If you may want to use inbound (server-side) proxying, using Proxy Protocol,
# uncomment the line below.
-# SUPPORT_PROXY=yes
+SUPPORT_PROXY=yes
#------------------------------------------------------------------------------
@@ -1038,9 +1044,9 @@ ZCAT_COMMAND=/usr/bin/zcat
# installed on your system (www.libspf2.org). Depending on where it is installed
# you may have to edit the CFLAGS and LDFLAGS lines.
-# SUPPORT_SPF=yes
+SUPPORT_SPF=yes
# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lspf2
+LDFLAGS += -lspf2
#------------------------------------------------------------------------------
@@ -1105,7 +1111,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# group. Once you have installed saslauthd, you should arrange for it to be
# started by root at boot time.
-# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
+CYRUS_SASLAUTHD_SOCKET=/var/run/saslauthd/mux
#------------------------------------------------------------------------------
@@ -1119,8 +1125,8 @@ ZCAT_COMMAND=/usr/bin/zcat
# library for TCP wrappers, so you probably need something like this:
#
# USE_TCP_WRAPPERS=yes
-# CFLAGS=-O -I/usr/local/include
-# EXTRALIBS_EXIM=-L/usr/local/lib -lwrap
+CFLAGS+=$(RPM_OPT_FLAGS) $(PIE)
+EXTRALIBS_EXIM=-lpam -ldl -export-dynamic -rdynamic
#
# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
# as well.
@@ -1172,7 +1178,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases
# is "yes", as well as supporting line editing, a history of input lines in the
# current run is maintained.
-# USE_READLINE=yes
+USE_READLINE=yes
# You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes.
# Note that this option adds to the size of the Exim binary, because the
@@ -1189,7 +1195,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases
#------------------------------------------------------------------------------
# Uncomment this setting to include IPv6 support.
-# HAVE_IPV6=yes
+HAVE_IPV6=yes
###############################################################################
# THINGS YOU ALMOST NEVER NEED TO MENTION #
@@ -1210,13 +1216,13 @@ SYSTEM_ALIASES_FILE=/etc/aliases
# haven't got Perl, Exim will still build and run; you just won't be able to
# use those utilities.
-# CHOWN_COMMAND=/usr/bin/chown
-# CHGRP_COMMAND=/usr/bin/chgrp
-# CHMOD_COMMAND=/usr/bin/chmod
-# MV_COMMAND=/bin/mv
-# RM_COMMAND=/bin/rm
-# TOUCH_COMMAND=/usr/bin/touch
-# PERL_COMMAND=/usr/bin/perl
+CHOWN_COMMAND=/usr/bin/chown
+CHGRP_COMMAND=/usr/bin/chgrp
+CHMOD_COMMAND=/usr/bin/chmod
+MV_COMMAND=/usr/bin/mv
+RM_COMMAND=/usr/bin/rm
+TOUCH_COMMAND=/usr/bin/touch
+PERL_COMMAND=/usr/bin/perl
#------------------------------------------------------------------------------
@@ -1418,7 +1424,7 @@ EXIM_TMPDIR="/tmp"
# (process id) to a file so that it can easily be identified. The path of the
# file can be specified here. Some installations may want something like this:
-# PID_FILE_PATH=/var/lock/exim.pid
+PID_FILE_PATH=/var/run/exim.pid
# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
# using the name "exim-daemon.pid".
diff --git a/src/configure.default b/src/configure.default
index d94c148..1f6afd4 100644
--- a/src/configure.default
+++ b/src/configure.default
@@ -67,7 +67,7 @@
# +local_domains, +relay_to_domains, and +relay_from_hosts, respectively. They
# are all colon-separated lists:
-domainlist local_domains = @
+domainlist local_domains = @ : localhost : localhost.localdomain
domainlist relay_to_domains =
hostlist relay_from_hosts = localhost
# (We rely upon hostname resolution working for localhost, because the default
@@ -119,11 +119,13 @@ hostlist relay_from_hosts = localhost
# manual for details. The lists above are used in the access control lists for
# checking incoming messages. The names of these ACLs are defined here:
+acl_smtp_mail = acl_check_mail
acl_smtp_rcpt = acl_check_rcpt
.ifdef _HAVE_PRDR
acl_smtp_data_prdr = acl_check_prdr
.endif
acl_smtp_data = acl_check_data
+acl_smtp_mime = acl_check_mime
# You should not change those settings until you understand how ACLs work.
@@ -136,7 +138,7 @@ acl_smtp_data = acl_check_data
# of what to set for other virus scanners. The second modification is in the
# acl_check_data access control list (see below).
-# av_scanner = clamd:/tmp/clamd
+av_scanner = clamd:/var/run/clamd.exim/clamd.sock
# For spam scanning, there is a similar option that defines the interface to
@@ -147,6 +149,12 @@ acl_smtp_data = acl_check_data
# spamd_address = 127.0.0.1 783
+# Set the default sqlite database file for greylisting. Uncomment this
+# if you use the greylisting ACLs defined below.
+
+# sqlite_dbfile = /var/spool/exim/db/greylist.db
+
+
# If Exim is compiled with support for TLS, you may want to enable the
# following options so that Exim allows clients to make encrypted
# connections. In the authenticators section below, there are template
@@ -157,7 +165,7 @@ acl_smtp_data = acl_check_data
# Allow any client to use TLS.
-# tls_advertise_hosts = *
+tls_advertise_hosts = *
# Specify the location of the Exim server's TLS certificate and private key.
# The private key must not be encrypted (password protected). You can put
@@ -165,8 +173,8 @@ acl_smtp_data = acl_check_data
# need the first setting, or in separate files, in which case you need both
# options.
-# tls_certificate = /etc/ssl/exim.crt
-# tls_privatekey = /etc/ssl/exim.pem
+tls_certificate = /etc/pki/tls/certs/exim.pem
+tls_privatekey = /etc/pki/tls/private/exim.pem
# For OpenSSL, prefer EC- over RSA-authenticated ciphers
# tls_require_ciphers = ECDSA:RSA:!COMPLEMENTOFDEFAULT
@@ -180,8 +188,8 @@ acl_smtp_data = acl_check_data
# them you should also allow TLS-on-connect on the traditional but
# non-standard port 465.
-# daemon_smtp_ports = 25 : 465 : 587
-# tls_on_connect_ports = 465
+daemon_smtp_ports = 25 : 465 : 587
+tls_on_connect_ports = 465
# Specify the domain you want to be added to all unqualified addresses
@@ -239,6 +247,24 @@ never_users = root
host_lookup = *
+# This setting, if uncommented, allows users to authenticate using
+# their system passwords against saslauthd if they connect over a
+# secure connection. If you have network logins such as NIS or
+# Kerberos rather than only local users, then you possibly also want
+# to configure /etc/sysconfig/saslauthd to use the 'pam' mechanism
+# too. Once a user is authenticated, the acl_check_rcpt ACL then
+# allows them to relay through the system.
+#
+# auth_advertise_hosts = ${if eq {$tls_cipher}{}{}{*}}
+#
+# By default, we set this option to allow SMTP AUTH from nowhere
+# (Exim's default would be to allow it from anywhere, even on an
+# unencrypted connection).
+#
+# Comment this one out if you uncomment the above. Did you make sure
+# saslauthd is actually running first?
+#
+auth_advertise_hosts =
# The setting below causes Exim to try to initialize the system resolver
# library with DNSSEC support. It has no effect if your library lacks
@@ -369,8 +395,8 @@ timeout_frozen_after = 7d
# Note that TZ is handled separately by the timezone runtime option
# and TIMEZONE_DEFAULT buildtime option.
-# keep_environment = ^LDAP
-# add_environment = PATH=/usr/bin::/bin
+keep_environment = ^LDAP
+add_environment = PATH=/usr/bin::/bin
@@ -381,6 +407,29 @@ timeout_frozen_after = 7d
begin acl
+
+# This access control list is used for the MAIL command in an incoming
+# SMTP message.
+
+acl_check_mail:
+
+ # Hosts are required to say HELO (or EHLO) before sending mail.
+ # So don't allow them to use the MAIL command if they haven't
+ # done so.
+
+ deny condition = ${if eq{$sender_helo_name}{} {1}}
+ message = Nice boys say HELO first
+
+ # Use the lack of reverse DNS to trigger greylisting. Some people
+ # even reject for it but that would be a little excessive.
+
+ warn condition = ${if eq{$sender_host_name}{} {1}}
+ set acl_m_greylistreasons = Host $sender_host_address lacks reverse DNS\n$acl_m_greylistreasons
+
+ accept
+
+
+
# This access control list is used for every RCPT command in an incoming
# SMTP message. The tests are run in order until the address is either
# accepted or denied.
@@ -392,6 +441,7 @@ acl_check_rcpt:
accept hosts = :
control = dkim_disable_verify
+ control = dmarc_disable_verify
#############################################################################
# The following section of the ACL is concerned with local parts that contain
@@ -445,7 +495,8 @@ acl_check_rcpt:
accept local_parts = postmaster
domains = +local_domains
- # Deny unless the sender address can be verified.
+ # Deny unless the sender address can be routed. For proper verification of the
+ # address, read the documentation on callouts and add the /callout modifier.
require verify = sender
@@ -485,6 +536,7 @@ acl_check_rcpt:
accept hosts = +relay_from_hosts
control = submission
control = dkim_disable_verify
+ control = dmarc_disable_verify
# Accept if the message arrived over an authenticated connection, from
# any host. Again, these messages are usually from MUAs, so recipient
@@ -494,6 +546,7 @@ acl_check_rcpt:
accept authenticated = *
control = submission
control = dkim_disable_verify
+ control = dmarc_disable_verify
# Insist that a HELO/EHLO was accepted.
@@ -519,7 +572,8 @@ acl_check_rcpt:
# There are no default checks on DNS black lists because the domains that
# contain these lists are changing all the time. However, here are two
# examples of how you can get Exim to perform a DNS black list lookup at this
- # point. The first one denies, whereas the second just warns.
+ # point. The first one denies, whereas the second just warns. The third
+ # triggers greylisting for any host in the blacklist.
#
# deny dnslists = black.list.example
# message = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text
@@ -527,6 +581,10 @@ acl_check_rcpt:
# warn dnslists = black.list.example
# add_header = X-Warning: $sender_host_address is in a black list at $dnslist_domain
# log_message = found in $dnslist_domain
+ #
+ # warn dnslists = black.list.example
+ # set acl_m_greylistreasons = Host found in $dnslist_domain\n$acl_m_greylistreasons
+ #
#############################################################################
#############################################################################
@@ -553,6 +611,10 @@ acl_check_rcpt:
# set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER}
#############################################################################
+ # Alternatively, greylist for it:
+ # warn !verify = csa
+ # set acl_m_greylistreasons = Host failed CSA check\n$acl_m_greylistreasons
+
# At this point, the address has passed all the checks that have been
# configured, so we accept it unconditionally.
@@ -602,21 +664,32 @@ acl_check_data:
message = header syntax
log_message = header syntax ($acl_verify_message)
+ # Put simple tests first. A good one is to check for the presence of a
+ # Message-Id: header, which RFC2822 says SHOULD be present. Some broken
+ # or misconfigured mailer software occasionally omits this from genuine
+ # messages too, though -- although it's not hard for the offender to fix
+ # after they receive a bounce because of it.
+ #
+ # deny condition = ${if !def:h_Message-ID: {1}}
+ # message = RFC2822 says that all mail SHOULD have a Message-ID header.\n\
+ # Most messages without it are spam, so your mail has been rejected.
+ #
+ # Alternatively if we're feeling more lenient we could just use it to
+ # trigger greylisting instead:
+
+ warn condition = ${if !def:h_Message-ID: {1}}
+ set acl_m_greylistreasons = Message lacks Message-Id: header. Consult RFC2822.\n$acl_m_greylistreasons
+
# Deny if the message contains a virus. Before enabling this check, you
# must install a virus scanner and set the av_scanner option above.
#
# deny malware = *
# message = This message contains a virus ($malware_name).
- # Add headers to a message if it is judged to be spam. Before enabling this,
- # you must install SpamAssassin. You may also need to set the spamd_address
- # option above.
+ # Bypass SpamAssassin checks if the message is too large.
#
- # warn spam = nobody
- # add_header = X-Spam_score: $spam_score\n\
- # X-Spam_score_int: $spam_score_int\n\
- # X-Spam_bar: $spam_bar\n\
- # X-Spam_report: $spam_report
+ # accept condition = ${if >={$message_size}{100000} {1}}
+ # add_header = X-Spam-Note: SpamAssassin run bypassed due to message size
#############################################################################
# No more tests if PRDR was actively used.
@@ -630,11 +703,63 @@ acl_check_data:
# condition = ...
#############################################################################
+ # Run SpamAssassin, but allow for it to fail or time out. Add a warning message
+ # and accept the mail if that happens. Add an X-Spam-Flag: header if the SA
+ # score exceeds the SA system threshold.
+ #
+ # warn spam = nobody/defer_ok
+ # add_header = X-Spam-Flag: YES
+ #
+ # accept condition = ${if !def:spam_score_int {1}}
+ # add_header = X-Spam-Note: SpamAssassin invocation failed
+ #
+
+ # Unconditionally add score and report headers
+ #
+ # warn add_header = X-Spam-Score: $spam_score ($spam_bar)\n\
+ # X-Spam-Report: $spam_report
+
+ # And reject if the SpamAssassin score is greater than ten
+ #
+ # deny condition = ${if >{$spam_score_int}{100} {1}}
+ # message = Your message scored $spam_score SpamAssassin point. Report follows:\n\
+ # $spam_report
+
+ # Trigger greylisting (if enabled) if the SpamAssassin score is greater than 0.5
+ #
+ # warn condition = ${if >{$spam_score_int}{5} {1}}
+ # set acl_m_greylistreasons = Message has $spam_score SpamAssassin points\n$acl_m_greylistreasons
+
- # Accept the message.
+ # If you want to greylist _all_ mail rather than only mail which looks like there
+ # might be something wrong with it, then you can do this...
+ #
+ # warn set acl_m_greylistreasons = We greylist all mail\n$acl_m_greylistreasons
+
+ # Now, invoke the greylisting. For this you need to have installed the exim-greylist
+ # package which contains this subroutine, and you need to uncomment the bit below
+ # which includes it too. Whenever the $acl_m_greylistreasons variable is non-empty,
+ # greylisting will kick in and will defer the mail to check if the sender is a
+ # proper mail which which retries, or whether it's a zombie. For more details, see
+ # the exim-greylist.conf.inc file itself.
+ #
+ # require acl = greylist_mail
accept
+# To enable the greylisting, also uncomment this line:
+# .include /etc/exim/exim-greylist.conf.inc
+
+acl_check_mime:
+
+ # File extension filtering.
+ deny message = Blacklisted file extension detected
+ condition = ${if match \
+ {${lc:$mime_filename}} \
+ {\N(\.exe|\.pif|\.bat|\.scr|\.lnk|\.com)$\N} \
+ {1}{0}}
+
+ accept
######################################################################
@@ -736,7 +861,7 @@ system_aliases:
driver = redirect
allow_fail
allow_defer
- data = ${lookup{$local_part}lsearch{SYSTEM_ALIASES_FILE}}
+ data = ${lookup{$local_part}lsearch{/etc/aliases}}
# user = exim
file_transport = address_file
pipe_transport = address_pipe
@@ -774,7 +899,7 @@ userforward:
# local_part_suffix = +* : -*
# local_part_suffix_optional
file = $home/.forward
-# allow_filter
+ allow_filter
no_verify
no_expn
check_ancestor
@@ -782,6 +907,12 @@ userforward:
pipe_transport = address_pipe
reply_transport = address_reply
+procmail:
+ driver = accept
+ check_local_user
+ require_files = ${local_part}:+${home}/.procmailrc:/usr/bin/procmail
+ transport = procmail
+ no_verify
# This router matches local user mailboxes. If the router fails, the error
# message is "Unknown user".
@@ -823,6 +954,25 @@ remote_smtp:
driver = smtp
message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
+# This transport is used for delivering messages over SMTP using the
+# "message submission" port (RFC4409).
+
+remote_msa:
+ driver = smtp
+ port = 587
+ hosts_require_auth = *
+
+
+# This transport invokes procmail to deliver mail
+procmail:
+ driver = pipe
+ command = "/usr/bin/procmail -d $local_part"
+ return_path_add
+ delivery_date_add
+ envelope_to_add
+ user = $local_part
+ initgroups
+ return_output
# This transport is used for delivering messages to a smarthost, if the
# smarthost router is enabled. This starts from the same basis as
@@ -875,8 +1025,8 @@ local_delivery:
delivery_date_add
envelope_to_add
return_path_add
-# group = mail
-# mode = 0660
+ group = mail
+ mode = 0660
# This transport is used for handling pipe deliveries generated by alias or
@@ -909,6 +1059,16 @@ address_reply:
driver = autoreply
+# This transport is used to deliver local mail to cyrus IMAP server via UNIX
+# socket. You'll need to configure the 'localuser' router above to use it.
+#
+#lmtp_delivery:
+# home_directory = /var/spool/imap
+# driver = lmtp
+# command = "/usr/lib/cyrus-imapd/deliver -l"
+# batch_max = 20
+# user = cyrus
+
######################################################################
# RETRY CONFIGURATION #
@@ -949,6 +1109,21 @@ begin rewrite
# AUTHENTICATION CONFIGURATION #
######################################################################
+begin authenticators
+
+# This authenticator supports CRAM-MD5 username/password authentication
+# with Exim acting as a _client_, as it might when sending its outgoing
+# mail to a smarthost rather than directly to the final recipient.
+# Replace SMTPAUTH_USERNAME and SMTPAUTH_PASSWORD as appropriate.
+
+#client_auth:
+# driver = cram_md5
+# public_name = CRAM-MD5
+# client_name = SMTPAUTH_USERNAME
+# client_secret = SMTPAUTH_PASSWORD
+
+#
+
# The following authenticators support plaintext username/password
# authentication using the standard PLAIN mechanism and the traditional
# but non-standard LOGIN mechanism, with Exim acting as the server.
@@ -964,7 +1139,7 @@ begin rewrite
# The default RCPT ACL checks for successful authentication, and will accept
# messages from authenticated users from anywhere on the Internet.
-begin authenticators
+#
# PLAIN authentication has no server prompts. The client sends its
# credentials in one lump, containing an authorization ID (which we do not
@@ -978,7 +1153,7 @@ begin authenticators
# driver = plaintext
# server_set_id = $auth2
# server_prompts = :
-# server_condition = Authentication is not yet configured
+# server_condition = ${if saslauthd{{$2}{$3}{smtp}} {1}}
# server_advertise_condition = ${if def:tls_in_cipher }
# LOGIN authentication has traditional prompts and responses. There is no
@@ -990,7 +1165,7 @@ begin authenticators
# driver = plaintext
# server_set_id = $auth1
# server_prompts = <| Username: | Password:
-# server_condition = Authentication is not yet configured
+# server_condition = ${if saslauthd{{$1}{$2}{smtp}} {1}}
# server_advertise_condition = ${if def:tls_in_cipher }