rpms/exim
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f24
exim/exim-4.87-config.patch
Jaroslav Škarvada a4234ab102 New version 
Resolves: rhbz#1325557
2016-04-10 23:30:22 +02:00

307 lines
10 KiB
Diff
Raw Permalink Blame History

diff --git a/scripts/Configure-Makefile b/scripts/Configure-Makefile
index 4aa7d76..3a5263c 100755
--- a/scripts/Configure-Makefile
+++ b/scripts/Configure-Makefile
@@ -253,7 +253,7 @@ if [ "${EXIM_PERL}" != "" ] ; then
mv $mft $mftt
echo "PERL_CC=`$PERL_COMMAND -MConfig -e 'print $Config{cc}'`" >>$mft
- echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts`" >>$mft
+ echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts` \$(CFLAGS)" >>$mft
echo "PERL_LIBS=`$PERL_COMMAND -MExtUtils::Embed -e ldopts`" >>$mft
echo "" >>$mft
cat $mftt >> $mft
diff --git a/src/EDITME b/src/EDITME
index d852103..bbb7527 100644
--- a/src/EDITME
+++ b/src/EDITME
@@ -98,7 +98,7 @@
# /usr/local/sbin. The installation script will try to create this directory,
# and any superior directories, if they do not exist.
-BIN_DIRECTORY=/usr/exim/bin
+BIN_DIRECTORY=/usr/sbin
#------------------------------------------------------------------------------
@@ -114,7 +114,7 @@ BIN_DIRECTORY=/usr/exim/bin
# don't exist. It will also install a default runtime configuration if this
# file does not exist.
-CONFIGURE_FILE=/usr/exim/configure
+CONFIGURE_FILE=/etc/exim/exim.conf
# It is possible to specify a colon-separated list of files for CONFIGURE_FILE.
# In this case, Exim will use the first of them that exists when it is run.
@@ -131,7 +131,7 @@ CONFIGURE_FILE=/usr/exim/configure
# deliveries. (Local deliveries run as various non-root users, typically as the
# owner of a local mailbox.) Specifying these values as root is not supported.
-EXIM_USER=
+EXIM_USER=93
# If you specify EXIM_USER as a name, this is looked up at build time, and the
# uid number is built into the binary. However, you can specify that this
@@ -152,7 +152,7 @@ EXIM_USER=
# for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless
# you want to use a group other than the default group for the given user.
-# EXIM_GROUP=
+EXIM_GROUP=93
# Many sites define a user called "exim", with an appropriate default group,
# and use
@@ -232,7 +232,7 @@ TRANSPORT_SMTP=yes
# This one is special-purpose, and commonly not required, so it is not
# included by default.
-# TRANSPORT_LMTP=yes
+TRANSPORT_LMTP=yes
#------------------------------------------------------------------------------
@@ -241,9 +241,9 @@ TRANSPORT_SMTP=yes
# MBX, is included only when requested. If you do not know what this is about,
# leave these settings commented out.
-# SUPPORT_MAILDIR=yes
-# SUPPORT_MAILSTORE=yes
-# SUPPORT_MBX=yes
+SUPPORT_MAILDIR=yes
+SUPPORT_MAILSTORE=yes
+SUPPORT_MBX=yes
#------------------------------------------------------------------------------
@@ -301,19 +301,21 @@ LOOKUP_DBM=yes
LOOKUP_LSEARCH=yes
LOOKUP_DNSDB=yes
-# LOOKUP_CDB=yes
-# LOOKUP_DSEARCH=yes
+LOOKUP_CDB=yes
+LOOKUP_DSEARCH=yes
# LOOKUP_IBASE=yes
-# LOOKUP_LDAP=yes
-# LOOKUP_MYSQL=yes
-# LOOKUP_NIS=yes
-# LOOKUP_NISPLUS=yes
+LOOKUP_LDAP=yes
+LDAP_LIB_TYPE=OPENLDAP2
+LOOKUP_INCLUDE=-I/usr/include/mysql
+LOOKUP_LIBS=-lldap -llber -lsqlite3 -L/usr/$(_lib)/mysql -lmysqlclient -lpq
+LOOKUP_MYSQL=yes
+LOOKUP_NIS=yes
+LOOKUP_NISPLUS=yes
# LOOKUP_ORACLE=yes
-# LOOKUP_PASSWD=yes
-# LOOKUP_PGSQL=yes
+LOOKUP_PASSWD=yes
+LOOKUP_PGSQL=yes
# LOOKUP_REDIS=yes
-# LOOKUP_SQLITE=yes
-# LOOKUP_SQLITE_PC=sqlite3
+LOOKUP_SQLITE=yes
# LOOKUP_WHOSON=yes
# These two settings are obsolete; all three lookups are compiled when
@@ -390,14 +392,14 @@ EXIM_MONITOR=eximon.bin
# and the MIME ACL. Please read the documentation to learn more about these
# features.
-# WITH_CONTENT_SCAN=yes
+WITH_CONTENT_SCAN=yes
# If you want to use the deprecated "demime" condition in the DATA ACL,
# uncomment the line below. Doing so will also explicitly turn on the
# WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of
# the "demime" condition.
-# WITH_OLD_DEMIME=yes
+WITH_OLD_DEMIME=yes
#------------------------------------------------------------------------------
# If you're using ClamAV and are backporting fixes to an old version, instead
@@ -573,7 +575,7 @@ FIXED_NEVER_USERS=root
# CONFIGURE_OWNER setting, to specify a configuration file which is listed in
# the TRUSTED_CONFIG_LIST file, then root privileges are not dropped by Exim.
-# TRUSTED_CONFIG_LIST=/usr/exim/trusted_configs
+TRUSTED_CONFIG_LIST=/etc/exim/trusted-configs
#------------------------------------------------------------------------------
@@ -618,16 +620,14 @@ FIXED_NEVER_USERS=root
# included in the Exim binary. You will then need to set up the run time
# configuration to make use of the mechanism(s) selected.
-# AUTH_CRAM_MD5=yes
-# AUTH_CYRUS_SASL=yes
-# AUTH_DOVECOT=yes
-# AUTH_GSASL=yes
-# AUTH_GSASL_PC=libgsasl
-# AUTH_HEIMDAL_GSSAPI=yes
-# AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi
-# AUTH_PLAINTEXT=yes
-# AUTH_SPA=yes
-# AUTH_TLS=yes
+AUTH_CRAM_MD5=yes
+AUTH_CYRUS_SASL=yes
+AUTH_DOVECOT=yes
+AUTH_GSASL=yes
+AUTH_GSASL_PC=libgsasl
+AUTH_PLAINTEXT=yes
+AUTH_SPA=yes
+AUTH_TLS=yes
#------------------------------------------------------------------------------
@@ -648,7 +648,7 @@ FIXED_NEVER_USERS=root
# one that is set in the headers_charset option. The default setting is
# defined by this setting:
-HEADERS_CHARSET="ISO-8859-1"
+HEADERS_CHARSET="UTF-8"
# If you are going to make use of $header_xxx expansions in your configuration
# file, or if your users are going to use them in filter files, and the normal
@@ -668,7 +668,7 @@ HEADERS_CHARSET="ISO-8859-1"
# the Sieve filter support. For those OS where iconv() is known to be installed
# as standard, the file in OS/Makefile-xxxx contains
#
-# HAVE_ICONV=yes
+HAVE_ICONV=yes
#
# If you are not using one of those systems, but have installed iconv(), you
# need to uncomment that line above. In some cases, you may find that iconv()
@@ -730,11 +730,11 @@ HEADERS_CHARSET="ISO-8859-1"
# leave these settings commented out.
# This setting is required for any TLS support (either OpenSSL or GnuTLS)
-# SUPPORT_TLS=yes
+SUPPORT_TLS=yes
# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
-# USE_OPENSSL_PC=openssl
-# TLS_LIBS=-lssl -lcrypto
+TLS_INCLUDE=-I/usr/kerberos/include
+TLS_LIBS=-lssl -lcrypto
# Uncomment the first and either the second or the third of these if you
# are using GnuTLS. If you have pkg-config, then the second, else the third.
@@ -799,7 +799,7 @@ HEADERS_CHARSET="ISO-8859-1"
# Once you have done this, "make install" will build the info files and
# install them in the directory you have defined.
-# INFO_DIRECTORY=/usr/share/info
+INFO_DIRECTORY=/usr/share/info
#------------------------------------------------------------------------------
@@ -812,7 +812,7 @@ HEADERS_CHARSET="ISO-8859-1"
# %s. This will be replaced by one of the strings "main", "panic", or "reject"
# to form the final file names. Some installations may want something like this:
-# LOG_FILE_PATH=/var/log/exim_%slog
+LOG_FILE_PATH=/var/log/exim/%s.log
# which results in files with names /var/log/exim_mainlog, etc. The directory
# in which the log files are placed must exist; Exim does not try to create
@@ -884,7 +884,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
# Perl costs quite a lot of resources. Only do this if you really need it.
-# EXIM_PERL=perl.o
+EXIM_PERL=perl.o
#------------------------------------------------------------------------------
@@ -894,7 +894,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# that the local_scan API is made available by the linker. You may also need
# to add -ldl to EXTRALIBS so that dlopen() is available to Exim.
-# EXPAND_DLFUNC=yes
+EXPAND_DLFUNC=yes
#------------------------------------------------------------------------------
@@ -904,7 +904,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# support, which is intended for use in conjunction with the SMTP AUTH
# facilities, is included only when requested by the following setting:
-# SUPPORT_PAM=yes
+SUPPORT_PAM=yes
# You probably need to add -lpam to EXTRALIBS, and in some releases of
# GNU/Linux -ldl is also needed.
@@ -998,7 +998,7 @@ ZCAT_COMMAND=/usr/bin/zcat
# group. Once you have installed saslauthd, you should arrange for it to be
# started by root at boot time.
-# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
+CYRUS_SASLAUTHD_SOCKET=/var/run/saslauthd/mux
#------------------------------------------------------------------------------
@@ -1011,9 +1011,9 @@ ZCAT_COMMAND=/usr/bin/zcat
# You may well also have to specify a local "include" file and an additional
# library for TCP wrappers, so you probably need something like this:
#
-# USE_TCP_WRAPPERS=yes
-# CFLAGS=-O -I/usr/local/include
-# EXTRALIBS_EXIM=-L/usr/local/lib -lwrap
+USE_TCP_WRAPPERS=yes
+CFLAGS+=$(RPM_OPT_FLAGS) $(PIE)
+EXTRALIBS_EXIM=-lwrap -lpam -ldl -export-dynamic -rdynamic
#
# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
# as well.
@@ -1065,7 +1065,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases
# is "yes", as well as supporting line editing, a history of input lines in the
# current run is maintained.
-# USE_READLINE=yes
+USE_READLINE=yes
# You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes.
# Note that this option adds to the size of the Exim binary, because the
@@ -1075,7 +1075,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases
#------------------------------------------------------------------------------
# Uncomment this setting to include IPv6 support.
-# HAVE_IPV6=yes
+HAVE_IPV6=yes
###############################################################################
# THINGS YOU ALMOST NEVER NEED TO MENTION #
@@ -1096,13 +1096,13 @@ SYSTEM_ALIASES_FILE=/etc/aliases
# haven't got Perl, Exim will still build and run; you just won't be able to
# use those utilities.
-# CHOWN_COMMAND=/usr/bin/chown
-# CHGRP_COMMAND=/usr/bin/chgrp
-# CHMOD_COMMAND=/usr/bin/chmod
-# MV_COMMAND=/bin/mv
-# RM_COMMAND=/bin/rm
-# TOUCH_COMMAND=/usr/bin/touch
-# PERL_COMMAND=/usr/bin/perl
+CHOWN_COMMAND=/usr/bin/chown
+CHGRP_COMMAND=/usr/bin/chgrp
+CHMOD_COMMAND=/usr/bin/chmod
+MV_COMMAND=/usr/bin/mv
+RM_COMMAND=/usr/bin/rm
+TOUCH_COMMAND=/usr/bin/touch
+PERL_COMMAND=/usr/bin/perl
#------------------------------------------------------------------------------
@@ -1304,7 +1304,7 @@ EXIM_TMPDIR="/tmp"
# (process id) to a file so that it can easily be identified. The path of the
# file can be specified here. Some installations may want something like this:
-# PID_FILE_PATH=/var/lock/exim.pid
+PID_FILE_PATH=/var/run/exim.pid
# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
# using the name "exim-daemon.pid".
Reference in New Issue View Git Blame Copy Permalink