From 64667ef5f3f087a139e0660ccca3e54a74226125 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jaroslav=20=C5=A0karvada?= Date: Mon, 11 Feb 2019 21:15:08 +0100 Subject: [PATCH] New version Resolves: rhbz#1674282 --- ...lter.patch => exim-4.92-allow-filter.patch | 4 +-- ....91-config.patch => exim-4.92-config.patch | 34 +++++++++--------- ...-4.91-cyrus.patch => exim-4.92-cyrus.patch | 4 +-- ....patch => exim-4.92-dlopen-localscan.patch | 27 +++++++------- ...nment.patch => exim-4.92-environment.patch | 4 +-- ...onf.patch => exim-4.92-greylist-conf.patch | 34 +++++++++--------- ...atch => exim-4.92-localhost-is-local.patch | 4 +-- ...mconfig.patch => exim-4.92-pamconfig.patch | 18 +++++----- ...procmail.patch => exim-4.92-procmail.patch | 14 ++++---- exim-4.91-rhl.patch => exim-4.92-rhl.patch | 6 ++-- ....patch => exim-4.92-smarthost-config.patch | 12 +++---- ...amdconf.patch => exim-4.92-spamdconf.patch | 36 ++++++++++--------- exim.spec | 32 +++++++++-------- sources | 2 +- 14 files changed, 120 insertions(+), 111 deletions(-) rename exim-4.91-allow-filter.patch => exim-4.92-allow-filter.patch (81%) rename exim-4.91-config.patch => exim-4.92-config.patch (92%) rename exim-4.91-cyrus.patch => exim-4.92-cyrus.patch (90%) rename exim-4.91-dlopen-localscan.patch => exim-4.92-dlopen-localscan.patch (93%) rename exim-4.90.1-environment.patch => exim-4.92-environment.patch (82%) rename exim-4.91-greylist-conf.patch => exim-4.92-greylist-conf.patch (84%) rename exim-4.87-localhost-is-local.patch => exim-4.92-localhost-is-local.patch (90%) rename exim-4.91-pamconfig.patch => exim-4.92-pamconfig.patch (84%) rename exim-4.91-procmail.patch => exim-4.92-procmail.patch (67%) rename exim-4.91-rhl.patch => exim-4.92-rhl.patch (84%) rename exim-4.91-smarthost-config.patch => exim-4.92-smarthost-config.patch (87%) rename exim-4.91-spamdconf.patch => exim-4.92-spamdconf.patch (83%) diff --git a/exim-4.91-allow-filter.patch b/exim-4.92-allow-filter.patch similarity index 81% rename from exim-4.91-allow-filter.patch rename to exim-4.92-allow-filter.patch index 127da02..d5b5664 100644 --- a/exim-4.91-allow-filter.patch +++ b/exim-4.92-allow-filter.patch @@ -1,8 +1,8 @@ diff --git a/src/configure.default b/src/configure.default -index 7d26076..ce3b3b0 100644 +index cef3779..09f0b36 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -733,7 +733,7 @@ userforward: +@@ -810,7 +810,7 @@ userforward: # local_part_suffix = +* : -* # local_part_suffix_optional file = $home/.forward diff --git a/exim-4.91-config.patch b/exim-4.92-config.patch similarity index 92% rename from exim-4.91-config.patch rename to exim-4.92-config.patch index bd770f5..83d09e8 100644 --- a/exim-4.91-config.patch +++ b/exim-4.92-config.patch @@ -12,7 +12,7 @@ index 7e0bf38..c97ccec 100755 echo "" >>$mft cat $mftt >> $mft diff --git a/src/EDITME b/src/EDITME -index bd5151d..4cd3b4d 100644 +index cbb0805..a42cd6f 100644 --- a/src/EDITME +++ b/src/EDITME @@ -98,7 +98,7 @@ @@ -116,7 +116,7 @@ index bd5151d..4cd3b4d 100644 # If you have content scanning you may wish to only include some of the scanner # interfaces. Uncomment any of these lines to remove that code. -@@ -590,7 +592,7 @@ FIXED_NEVER_USERS=root +@@ -595,7 +597,7 @@ FIXED_NEVER_USERS=root # CONFIGURE_OWNER setting, to specify a configuration file which is listed in # the TRUSTED_CONFIG_LIST file, then root privileges are not dropped by Exim. @@ -125,7 +125,7 @@ index bd5151d..4cd3b4d 100644 #------------------------------------------------------------------------------ -@@ -635,17 +637,14 @@ FIXED_NEVER_USERS=root +@@ -640,17 +642,14 @@ FIXED_NEVER_USERS=root # included in the Exim binary. You will then need to set up the run time # configuration to make use of the mechanism(s) selected. @@ -151,7 +151,7 @@ index bd5151d..4cd3b4d 100644 # Heimdal through 1.5 required pkg-config 'heimdal-gssapi'; Heimdal 7.1 # requires multiple pkg-config files to work with Exim, so the second example -@@ -669,7 +668,7 @@ FIXED_NEVER_USERS=root +@@ -674,7 +673,7 @@ FIXED_NEVER_USERS=root # one that is set in the headers_charset option. The default setting is # defined by this setting: @@ -160,7 +160,7 @@ index bd5151d..4cd3b4d 100644 # If you are going to make use of $header_xxx expansions in your configuration # file, or if your users are going to use them in filter files, and the normal -@@ -689,7 +688,7 @@ HEADERS_CHARSET="ISO-8859-1" +@@ -694,7 +693,7 @@ HEADERS_CHARSET="ISO-8859-1" # the Sieve filter support. For those OS where iconv() is known to be installed # as standard, the file in OS/Makefile-xxxx contains # @@ -169,7 +169,7 @@ index bd5151d..4cd3b4d 100644 # # If you are not using one of those systems, but have installed iconv(), you # need to uncomment that line above. In some cases, you may find that iconv() -@@ -758,11 +757,11 @@ HEADERS_CHARSET="ISO-8859-1" +@@ -763,11 +762,11 @@ HEADERS_CHARSET="ISO-8859-1" # leave these settings commented out. # This setting is required for any TLS support (either OpenSSL or GnuTLS) @@ -184,7 +184,7 @@ index bd5151d..4cd3b4d 100644 # Uncomment the first and either the second or the third of these if you # are using GnuTLS. If you have pkg-config, then the second, else the third. -@@ -834,7 +833,7 @@ HEADERS_CHARSET="ISO-8859-1" +@@ -839,7 +838,7 @@ HEADERS_CHARSET="ISO-8859-1" # Once you have done this, "make install" will build the info files and # install them in the directory you have defined. @@ -193,7 +193,7 @@ index bd5151d..4cd3b4d 100644 #------------------------------------------------------------------------------ -@@ -847,7 +846,7 @@ HEADERS_CHARSET="ISO-8859-1" +@@ -852,7 +851,7 @@ HEADERS_CHARSET="ISO-8859-1" # %s. This will be replaced by one of the strings "main", "panic", or "reject" # to form the final file names. Some installations may want something like this: @@ -202,7 +202,7 @@ index bd5151d..4cd3b4d 100644 # which results in files with names /var/log/exim_mainlog, etc. The directory # in which the log files are placed must exist; Exim does not try to create -@@ -919,7 +918,7 @@ ZCAT_COMMAND=/usr/bin/zcat +@@ -924,7 +923,7 @@ ZCAT_COMMAND=/usr/bin/zcat # (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded # Perl costs quite a lot of resources. Only do this if you really need it. @@ -211,7 +211,7 @@ index bd5151d..4cd3b4d 100644 #------------------------------------------------------------------------------ -@@ -929,7 +928,7 @@ ZCAT_COMMAND=/usr/bin/zcat +@@ -934,7 +933,7 @@ ZCAT_COMMAND=/usr/bin/zcat # that the local_scan API is made available by the linker. You may also need # to add -ldl to EXTRALIBS so that dlopen() is available to Exim. @@ -220,7 +220,7 @@ index bd5151d..4cd3b4d 100644 #------------------------------------------------------------------------------ -@@ -939,7 +938,7 @@ ZCAT_COMMAND=/usr/bin/zcat +@@ -944,7 +943,7 @@ ZCAT_COMMAND=/usr/bin/zcat # support, which is intended for use in conjunction with the SMTP AUTH # facilities, is included only when requested by the following setting: @@ -229,7 +229,7 @@ index bd5151d..4cd3b4d 100644 # You probably need to add -lpam to EXTRALIBS, and in some releases of # GNU/Linux -ldl is also needed. -@@ -1047,7 +1046,7 @@ ZCAT_COMMAND=/usr/bin/zcat +@@ -1052,7 +1051,7 @@ ZCAT_COMMAND=/usr/bin/zcat # group. Once you have installed saslauthd, you should arrange for it to be # started by root at boot time. @@ -238,7 +238,7 @@ index bd5151d..4cd3b4d 100644 #------------------------------------------------------------------------------ -@@ -1061,8 +1060,8 @@ ZCAT_COMMAND=/usr/bin/zcat +@@ -1066,8 +1065,8 @@ ZCAT_COMMAND=/usr/bin/zcat # library for TCP wrappers, so you probably need something like this: # # USE_TCP_WRAPPERS=yes @@ -249,7 +249,7 @@ index bd5151d..4cd3b4d 100644 # # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM # as well. -@@ -1114,7 +1113,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases +@@ -1119,7 +1118,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases # is "yes", as well as supporting line editing, a history of input lines in the # current run is maintained. @@ -258,7 +258,7 @@ index bd5151d..4cd3b4d 100644 # You may need to add -ldl to EXTRALIBS when you set USE_READLINE=yes. # Note that this option adds to the size of the Exim binary, because the -@@ -1131,7 +1130,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases +@@ -1136,7 +1135,7 @@ SYSTEM_ALIASES_FILE=/etc/aliases #------------------------------------------------------------------------------ # Uncomment this setting to include IPv6 support. @@ -267,7 +267,7 @@ index bd5151d..4cd3b4d 100644 ############################################################################### # THINGS YOU ALMOST NEVER NEED TO MENTION # -@@ -1152,13 +1151,13 @@ SYSTEM_ALIASES_FILE=/etc/aliases +@@ -1157,13 +1156,13 @@ SYSTEM_ALIASES_FILE=/etc/aliases # haven't got Perl, Exim will still build and run; you just won't be able to # use those utilities. @@ -288,7 +288,7 @@ index bd5151d..4cd3b4d 100644 #------------------------------------------------------------------------------ -@@ -1360,7 +1359,7 @@ EXIM_TMPDIR="/tmp" +@@ -1365,7 +1364,7 @@ EXIM_TMPDIR="/tmp" # (process id) to a file so that it can easily be identified. The path of the # file can be specified here. Some installations may want something like this: diff --git a/exim-4.91-cyrus.patch b/exim-4.92-cyrus.patch similarity index 90% rename from exim-4.91-cyrus.patch rename to exim-4.92-cyrus.patch index 1782180..f8e2984 100644 --- a/exim-4.91-cyrus.patch +++ b/exim-4.92-cyrus.patch @@ -1,8 +1,8 @@ diff --git a/src/configure.default b/src/configure.default -index 78e44d2..ae50b15 100644 +index 69e0ed1..6db4947 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -774,6 +774,16 @@ address_reply: +@@ -901,6 +901,16 @@ address_reply: driver = autoreply diff --git a/exim-4.91-dlopen-localscan.patch b/exim-4.92-dlopen-localscan.patch similarity index 93% rename from exim-4.91-dlopen-localscan.patch rename to exim-4.92-dlopen-localscan.patch index c8db483..3c2f00c 100644 --- a/exim-4.91-dlopen-localscan.patch +++ b/exim-4.92-dlopen-localscan.patch @@ -1,8 +1,8 @@ diff --git a/src/EDITME b/src/EDITME -index 4cd3b4d..1b79e71 100644 +index a42cd6f..0acd673 100644 --- a/src/EDITME +++ b/src/EDITME -@@ -817,6 +817,20 @@ TLS_LIBS=-lssl -lcrypto +@@ -822,6 +822,20 @@ TLS_LIBS=-lssl -lcrypto # specified in INCLUDE. @@ -24,7 +24,7 @@ index 4cd3b4d..1b79e71 100644 # The default distribution of Exim contains only the plain text form of the # documentation. Other forms are available separately. If you want to install diff --git a/src/config.h.defaults b/src/config.h.defaults -index ce478d5..6ce0d45 100644 +index 7c2e534..3fafe61 100644 --- a/src/config.h.defaults +++ b/src/config.h.defaults @@ -32,6 +32,8 @@ Do not put spaces between # and the 'define'. @@ -37,10 +37,10 @@ index ce478d5..6ce0d45 100644 #define CONFIGURE_FILE diff --git a/src/globals.c b/src/globals.c -index 7d18b38..438c993 100644 +index b3362a3..0884fe5 100644 --- a/src/globals.c +++ b/src/globals.c -@@ -167,6 +167,10 @@ uschar *tls_verify_hosts = NULL; +@@ -173,6 +173,10 @@ uschar *tls_verify_hosts = NULL; uschar *tls_advertise_hosts = NULL; #endif @@ -52,10 +52,10 @@ index 7d18b38..438c993 100644 /* Per Recipient Data Response variables */ BOOL prdr_enable = FALSE; diff --git a/src/globals.h b/src/globals.h -index da1230b..b9f0155 100644 +index f71f104..3faf176 100644 --- a/src/globals.h +++ b/src/globals.h -@@ -126,6 +126,11 @@ extern uschar *tls_try_verify_hosts; /* Optional client verification */ +@@ -131,6 +131,11 @@ extern uschar *tls_try_verify_hosts; /* Optional client verification */ extern uschar *tls_verify_certificates;/* Path for certificates to check */ extern uschar *tls_verify_hosts; /* Mandatory client verification */ #endif @@ -68,10 +68,10 @@ index da1230b..b9f0155 100644 extern uschar *dsn_envid; /* DSN envid string */ diff --git a/src/local_scan.c b/src/local_scan.c -index 3500047..8599172 100644 +index 4dd0b2b..8599172 100644 --- a/src/local_scan.c +++ b/src/local_scan.c -@@ -5,60 +5,131 @@ +@@ -5,61 +5,131 @@ /* Copyright (c) University of Cambridge 1995 - 2009 */ /* See the file NOTICE for conditions of use and distribution. */ @@ -83,6 +83,7 @@ index 3500047..8599172 100644 -Local/local_scan.c, and edit the copy. To use your version instead of the -default, you must set - +-HAVE_LOCAL_SCAN=yes -LOCAL_SCAN_SOURCE=Local/local_scan.c - -in your Local/Makefile. This makes it easy to copy your version for use with @@ -251,16 +252,16 @@ index 3500047..8599172 100644 + /* End of local_scan.c */ diff --git a/src/readconf.c b/src/readconf.c -index cbbef6e..da3421a 100644 +index 5742d10..3f1d9c1 100644 --- a/src/readconf.c +++ b/src/readconf.c -@@ -195,6 +195,9 @@ static optionlist optionlist_config[] = { +@@ -199,6 +199,9 @@ static optionlist optionlist_config[] = { { "local_from_prefix", opt_stringptr, &local_from_prefix }, { "local_from_suffix", opt_stringptr, &local_from_suffix }, { "local_interfaces", opt_stringptr, &local_interfaces }, +#ifdef DLOPEN_LOCAL_SCAN + { "local_scan_path", opt_stringptr, &local_scan_path }, +#endif + #ifdef HAVE_LOCAL_SCAN { "local_scan_timeout", opt_time, &local_scan_timeout }, - { "local_sender_retain", opt_bool, &local_sender_retain }, - { "localhost_number", opt_stringptr, &host_number_string }, + #endif diff --git a/exim-4.90.1-environment.patch b/exim-4.92-environment.patch similarity index 82% rename from exim-4.90.1-environment.patch rename to exim-4.92-environment.patch index aae43f6..831a4e7 100644 --- a/exim-4.90.1-environment.patch +++ b/exim-4.92-environment.patch @@ -1,8 +1,8 @@ diff --git a/src/configure.default b/src/configure.default -index b955c6e..590c664 100644 +index 241a961..1403d4a 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -360,8 +360,8 @@ timeout_frozen_after = 7d +@@ -384,8 +384,8 @@ timeout_frozen_after = 7d # Note that TZ is handled separately by the timezone runtime option # and TIMEZONE_DEFAULT buildtime option. diff --git a/exim-4.91-greylist-conf.patch b/exim-4.92-greylist-conf.patch similarity index 84% rename from exim-4.91-greylist-conf.patch rename to exim-4.92-greylist-conf.patch index 2d02d75..f9bfb4f 100644 --- a/exim-4.91-greylist-conf.patch +++ b/exim-4.92-greylist-conf.patch @@ -1,16 +1,16 @@ diff --git a/src/configure.default b/src/configure.default -index f1260cf..05e9371 100644 +index 9242bac..439287a 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -107,6 +107,7 @@ hostlist relay_from_hosts = localhost +@@ -119,6 +119,7 @@ hostlist relay_from_hosts = localhost # manual for details. The lists above are used in the access control lists for # checking incoming messages. The names of these ACLs are defined here: -+acl_smtp_mail = acl_check_mail - acl_smtp_rcpt = acl_check_rcpt - acl_smtp_data = acl_check_data - acl_smtp_mime = acl_check_mime -@@ -371,6 +372,29 @@ timeout_frozen_after = 7d +++acl_smtp_mail = acl_check_mail + acl_smtp_rcpt = acl_check_rcpt + .ifdef _HAVE_PRDR + acl_smtp_data_prdr = acl_check_prdr +@@ -395,6 +396,29 @@ timeout_frozen_after = 7d begin acl @@ -40,7 +40,7 @@ index f1260cf..05e9371 100644 # This access control list is used for every RCPT command in an incoming # SMTP message. The tests are run in order until the address is either # accepted or denied. -@@ -496,7 +520,8 @@ acl_check_rcpt: +@@ -520,7 +544,8 @@ acl_check_rcpt: # There are no default checks on DNS black lists because the domains that # contain these lists are changing all the time. However, here are two # examples of how you can get Exim to perform a DNS black list lookup at this @@ -50,7 +50,7 @@ index f1260cf..05e9371 100644 # # deny message = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text # dnslists = black.list.example -@@ -504,6 +529,10 @@ acl_check_rcpt: +@@ -528,6 +553,10 @@ acl_check_rcpt: # warn dnslists = black.list.example # add_header = X-Warning: $sender_host_address is in a black list at $dnslist_domain # log_message = found in $dnslist_domain @@ -61,8 +61,8 @@ index f1260cf..05e9371 100644 ############################################################################# ############################################################################# -@@ -517,6 +546,10 @@ acl_check_rcpt: - # require verify = csa +@@ -554,6 +583,10 @@ acl_check_rcpt: + # set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER} ############################################################################# + # Alternatively, greylist for it: @@ -72,7 +72,7 @@ index f1260cf..05e9371 100644 # At this point, the address has passed all the checks that have been # configured, so we accept it unconditionally. -@@ -555,6 +588,12 @@ acl_check_data: +@@ -612,6 +645,12 @@ acl_check_data: # deny condition = ${if !def:h_Message-ID: {1}} # message = RFC2822 says that all mail SHOULD have a Message-ID header.\n\ # Most messages without it are spam, so your mail has been rejected. @@ -85,9 +85,9 @@ index f1260cf..05e9371 100644 # Deny if the message contains a virus. Before enabling this check, you # must install a virus scanner and set the av_scanner option above. -@@ -589,8 +628,30 @@ acl_check_data: - # message = Your message scored $spam_score SpamAssassin point. Report follows:\n\ - # $spam_report +@@ -669,8 +708,30 @@ acl_check_mime: + {\N(\.exe|\.pif|\.bat|\.scr|\.lnk|\.com)$\N} \ + {1}{0}} + # Trigger greylisting (if enabled) if the SpamAssassin score is greater than 0.5 + # @@ -114,5 +114,5 @@ index f1260cf..05e9371 100644 +# To enable the greylisting, also uncomment this line: +# .include /etc/exim/exim-greylist.conf.inc - acl_check_mime: - + ###################################################################### + # ROUTERS CONFIGURATION # diff --git a/exim-4.87-localhost-is-local.patch b/exim-4.92-localhost-is-local.patch similarity index 90% rename from exim-4.87-localhost-is-local.patch rename to exim-4.92-localhost-is-local.patch index 5810698..02a10a2 100644 --- a/exim-4.87-localhost-is-local.patch +++ b/exim-4.92-localhost-is-local.patch @@ -1,8 +1,8 @@ diff --git a/src/configure.default b/src/configure.default -index d1ce2f1..1f10008 100644 +index 09f0b36..9242bac 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -55,7 +55,7 @@ +@@ -67,7 +67,7 @@ # +local_domains, +relay_to_domains, and +relay_from_hosts, respectively. They # are all colon-separated lists: diff --git a/exim-4.91-pamconfig.patch b/exim-4.92-pamconfig.patch similarity index 84% rename from exim-4.91-pamconfig.patch rename to exim-4.92-pamconfig.patch index b330a5b..bbe3dde 100644 --- a/exim-4.91-pamconfig.patch +++ b/exim-4.92-pamconfig.patch @@ -1,8 +1,8 @@ diff --git a/src/configure.default b/src/configure.default -index ae50b15..6966ad3 100644 +index 6db4947..f1198b1 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -142,7 +142,7 @@ acl_smtp_data = acl_check_data +@@ -157,7 +157,7 @@ acl_smtp_data = acl_check_data # Allow any client to use TLS. @@ -11,7 +11,7 @@ index ae50b15..6966ad3 100644 # Specify the location of the Exim server's TLS certificate and private key. # The private key must not be encrypted (password protected). You can put -@@ -150,8 +150,8 @@ acl_smtp_data = acl_check_data +@@ -165,8 +165,8 @@ acl_smtp_data = acl_check_data # need the first setting, or in separate files, in which case you need both # options. @@ -22,7 +22,7 @@ index ae50b15..6966ad3 100644 # For OpenSSL, prefer EC- over RSA-authenticated ciphers # tls_require_ciphers = ECDSA:RSA:!COMPLEMENTOFDEFAULT -@@ -165,8 +165,8 @@ acl_smtp_data = acl_check_data +@@ -180,8 +180,8 @@ acl_smtp_data = acl_check_data # them you should also allow TLS-on-connect on the traditional but # non-standard port 465. @@ -33,7 +33,7 @@ index ae50b15..6966ad3 100644 # Specify the domain you want to be added to all unqualified addresses -@@ -224,6 +224,24 @@ never_users = root +@@ -239,6 +239,24 @@ never_users = root host_lookup = * @@ -56,9 +56,9 @@ index ae50b15..6966ad3 100644 +# +auth_advertise_hosts = - # The settings below cause Exim to make RFC 1413 (ident) callbacks - # for all incoming SMTP calls. You can limit the hosts to which these -@@ -853,7 +871,7 @@ begin authenticators + # The setting below causes Exim to try to initialize the system resolver + # library with DNSSEC support. It has no effect if your library lacks +@@ -980,7 +998,7 @@ begin authenticators # driver = plaintext # server_set_id = $auth2 # server_prompts = : @@ -67,7 +67,7 @@ index ae50b15..6966ad3 100644 # server_advertise_condition = ${if def:tls_in_cipher } # LOGIN authentication has traditional prompts and responses. There is no -@@ -865,7 +883,7 @@ begin authenticators +@@ -992,7 +1010,7 @@ begin authenticators # driver = plaintext # server_set_id = $auth1 # server_prompts = <| Username: | Password: diff --git a/exim-4.91-procmail.patch b/exim-4.92-procmail.patch similarity index 67% rename from exim-4.91-procmail.patch rename to exim-4.92-procmail.patch index 5c70ae6..5fd6f73 100644 --- a/exim-4.91-procmail.patch +++ b/exim-4.92-procmail.patch @@ -1,8 +1,8 @@ diff --git a/src/configure.default b/src/configure.default -index dd5bfeb..7d26076 100644 +index 8f88a3b..cef3779 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -741,6 +741,12 @@ userforward: +@@ -818,6 +818,12 @@ userforward: pipe_transport = address_pipe reply_transport = address_reply @@ -15,9 +15,9 @@ index dd5bfeb..7d26076 100644 # This router matches local user mailboxes. If the router fails, the error # message is "Unknown user". -@@ -782,6 +788,16 @@ remote_smtp: - driver = smtp - message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}} +@@ -866,6 +872,16 @@ remote_smtp: + hosts_try_prdr = * + .endif +# This transport invokes procmail to deliver mail +procmail: @@ -30,5 +30,5 @@ index dd5bfeb..7d26076 100644 + initgroups + return_output - # This transport is used for local delivery to user mailboxes in traditional - # BSD mailbox format. By default it will be run under the uid and gid of the + # This transport is used for delivering messages to a smarthost, if the + # smarthost router is enabled. This starts from the same basis as diff --git a/exim-4.91-rhl.patch b/exim-4.92-rhl.patch similarity index 84% rename from exim-4.91-rhl.patch rename to exim-4.92-rhl.patch index 7cdfba8..236da8f 100644 --- a/exim-4.91-rhl.patch +++ b/exim-4.92-rhl.patch @@ -1,8 +1,8 @@ diff --git a/src/configure.default b/src/configure.default -index 79bbc8c..78e44d2 100644 +index 555dec3..69e0ed1 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -639,7 +639,7 @@ system_aliases: +@@ -718,7 +718,7 @@ system_aliases: driver = redirect allow_fail allow_defer @@ -11,7 +11,7 @@ index 79bbc8c..78e44d2 100644 # user = exim file_transport = address_file pipe_transport = address_pipe -@@ -740,8 +740,8 @@ local_delivery: +@@ -867,8 +867,8 @@ local_delivery: delivery_date_add envelope_to_add return_path_add diff --git a/exim-4.91-smarthost-config.patch b/exim-4.92-smarthost-config.patch similarity index 87% rename from exim-4.91-smarthost-config.patch rename to exim-4.92-smarthost-config.patch index ba1dad8..42e6d1a 100644 --- a/exim-4.91-smarthost-config.patch +++ b/exim-4.92-smarthost-config.patch @@ -1,10 +1,10 @@ diff --git a/src/configure.default b/src/configure.default -index 05e9371..5e61818 100644 +index 439287a..241a961 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -849,6 +849,15 @@ remote_smtp: - driver = smtp - message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}} +@@ -933,6 +933,15 @@ remote_smtp: + hosts_try_prdr = * + .endif +# This transport is used for delivering messages over SMTP using the +# "message submission" port (RFC4409). @@ -18,7 +18,7 @@ index 05e9371..5e61818 100644 # This transport invokes procmail to deliver mail procmail: driver = pipe -@@ -957,6 +966,21 @@ begin rewrite +@@ -1082,6 +1091,21 @@ begin rewrite # AUTHENTICATION CONFIGURATION # ###################################################################### @@ -40,7 +40,7 @@ index 05e9371..5e61818 100644 # The following authenticators support plaintext username/password # authentication using the standard PLAIN mechanism and the traditional # but non-standard LOGIN mechanism, with Exim acting as the server. -@@ -972,7 +996,7 @@ begin rewrite +@@ -1097,7 +1121,7 @@ begin rewrite # The default RCPT ACL checks for successful authentication, and will accept # messages from authenticated users from anywhere on the Internet. diff --git a/exim-4.91-spamdconf.patch b/exim-4.92-spamdconf.patch similarity index 83% rename from exim-4.91-spamdconf.patch rename to exim-4.92-spamdconf.patch index 3edc425..cab7969 100644 --- a/exim-4.91-spamdconf.patch +++ b/exim-4.92-spamdconf.patch @@ -1,16 +1,16 @@ diff --git a/src/configure.default b/src/configure.default -index 6966ad3..dd5bfeb 100644 +index f1198b1..8f88a3b 100644 --- a/src/configure.default +++ b/src/configure.default -@@ -109,6 +109,7 @@ hostlist relay_from_hosts = localhost - - acl_smtp_rcpt = acl_check_rcpt - acl_smtp_data = acl_check_data -+acl_smtp_mime = acl_check_mime +@@ -124,6 +124,7 @@ acl_smtp_rcpt = acl_check_rcpt + acl_smtp_data_prdr = acl_check_prdr + .endif + acl_smtp_data = acl_check_data ++acl_smtp_mime = acl_check_mime # You should not change those settings until you understand how ACLs work. -@@ -121,7 +122,7 @@ acl_smtp_data = acl_check_data +@@ -136,7 +137,7 @@ acl_smtp_data = acl_check_data # of what to set for other virus scanners. The second modification is in the # acl_check_data access control list (see below). @@ -19,7 +19,7 @@ index 6966ad3..dd5bfeb 100644 # For spam scanning, there is a similar option that defines the interface to -@@ -434,7 +435,8 @@ acl_check_rcpt: +@@ -458,7 +459,8 @@ acl_check_rcpt: accept local_parts = postmaster domains = +local_domains @@ -29,9 +29,9 @@ index 6966ad3..dd5bfeb 100644 require verify = sender -@@ -544,27 +546,63 @@ acl_check_data: - message = header syntax - log_message = header syntax ($acl_verify_message) +@@ -601,21 +603,26 @@ acl_check_data: + message = header syntax + log_message = header syntax ($acl_verify_message) + # Put simple tests first. A good one is to check for the presence of a + # Message-Id: header, which RFC2822 says SHOULD be present. Some broken @@ -62,7 +62,12 @@ index 6966ad3..dd5bfeb 100644 + # accept condition = ${if >={$message_size}{100000} {1}} + # add_header = X-Spam-Note: SpamAssassin run bypassed due to message size -- # Accept the message. + ############################################################################# + # No more tests if PRDR was actively used. +@@ -629,11 +636,40 @@ acl_check_data: + # condition = ... + ############################################################################# + + # Run SpamAssassin, but allow for it to fail or time out. Add a warning message + # and accept the mail if that happens. Add an X-Spam-Flag: header if the SA + # score exceeds the SA system threshold. @@ -73,7 +78,8 @@ index 6966ad3..dd5bfeb 100644 + # accept condition = ${if !def:spam_score_int {1}} + # add_header = X-Spam-Note: SpamAssassin invocation failed + # -+ + +- # Accept the message. + # Unconditionally add score and report headers + # + # warn add_header = X-Spam-Score: $spam_score ($spam_bar)\n\ @@ -87,7 +93,6 @@ index 6966ad3..dd5bfeb 100644 accept - +acl_check_mime: + + # File extension filtering. @@ -98,7 +103,6 @@ index 6966ad3..dd5bfeb 100644 + {1}{0}} + + accept -+ + ###################################################################### - # ROUTERS CONFIGURATION # diff --git a/exim.spec b/exim.spec index 444fb3d..372f5be 100644 --- a/exim.spec +++ b/exim.spec @@ -13,8 +13,8 @@ Summary: The exim mail transfer agent Name: exim -Version: 4.91 -Release: 6%{?dist} +Version: 4.92 +Release: 1%{?dist} License: GPLv2+ Url: http://www.exim.org/ Provides: MTA smtpd smtpdaemon server(smtp) @@ -44,20 +44,20 @@ Source24: exim.service Source25: exim-gen-cert Source26: clamd.exim.service -Patch4: exim-4.91-rhl.patch -Patch6: exim-4.91-config.patch +Patch4: exim-4.92-rhl.patch +Patch6: exim-4.92-config.patch Patch8: exim-4.82-libdir.patch -Patch12: exim-4.91-cyrus.patch -Patch13: exim-4.91-pamconfig.patch -Patch14: exim-4.91-spamdconf.patch -Patch18: exim-4.91-dlopen-localscan.patch -Patch19: exim-4.91-procmail.patch -Patch20: exim-4.91-allow-filter.patch -Patch21: exim-4.87-localhost-is-local.patch -Patch22: exim-4.91-greylist-conf.patch -Patch23: exim-4.91-smarthost-config.patch +Patch12: exim-4.92-cyrus.patch +Patch13: exim-4.92-pamconfig.patch +Patch14: exim-4.92-spamdconf.patch +Patch18: exim-4.92-dlopen-localscan.patch +Patch19: exim-4.92-procmail.patch +Patch20: exim-4.92-allow-filter.patch +Patch21: exim-4.92-localhost-is-local.patch +Patch22: exim-4.92-greylist-conf.patch +Patch23: exim-4.92-smarthost-config.patch Patch26: exim-4.85-pic.patch -Patch27: exim-4.90.1-environment.patch +Patch27: exim-4.92-environment.patch # Workaround for NIS removal from glibc, bug 1534920 Patch33: exim-4.90.1-nsl-fix.patch @@ -571,6 +571,10 @@ test "$1" = 0 || %{_initrddir}/clamd.exim condrestart >/dev/null 2>&1 || : %{_sysconfdir}/cron.daily/greylist-tidy.sh %changelog +* Mon Feb 11 2019 Jaroslav Škarvada - 4.92-1 +- New version + Resolves: rhbz#1674282 + * Thu Jan 31 2019 Fedora Release Engineering - 4.91-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild diff --git a/sources b/sources index 8490f67..2e882ad 100644 --- a/sources +++ b/sources @@ -1 +1 @@ -SHA512 (exim-4.91.tar.xz) = 35b34dda8dd0f27c0429e6eb8409756ecd3cf9e535bac421d696b1560db0ff3bf4cd0e4a00bc0b7e32137d31bb5de20776c7c1830ec125aa36b5c4376b0c71a2 +SHA512 (exim-4.92.tar.xz) = 62c327e6184a358ba7f0dbc38b44d2537234be91727a5bfac97e74af64a8d77e376b3221dcfdd8f6eca7d812f9233595503dc6e50e2972bed40a1b74eb209c31