dracut/0068-iscsi-integrate-with-systemd-and-improve-robustness.patch
Harald Hoyer bb31e7fe65 dracut-043-172.git20151113
- git snapshot
2015-11-13 16:51:52 +01:00

296 lines
12 KiB
Diff

From d94050ddaea8343d8adb8f151c8f4cad591d29d9 Mon Sep 17 00:00:00 2001
From: Harald Hoyer <harald@redhat.com>
Date: Wed, 12 Aug 2015 14:33:49 +0200
Subject: [PATCH] iscsi: integrate with systemd and improve robustness
parse-cmdline sets up an initial initiator-name to let iscsid start.
iscsid is started before doing any iscsistart business.
iscsistart is done with systemd-run asynchrone to do things in
paralllel. Also restarted for every new interface which shows up.
If rd.iscsi.waitnet (default) is set, iscsistart is done only
after all interfaces are up.
If not all interfaces are up and rd.iscsi.testroute (default) is set,
the route to a iscsi target IP is checked and skipped, if there is none.
If all things fail, we issue a "dummy" interface iscsiroot to retry
everything in the initqueue/timeout.
---
modules.d/95iscsi/cleanup-iscsi.sh | 2 +-
modules.d/95iscsi/iscsiroot.sh | 116 ++++++++++++++++++++++++-----------
modules.d/95iscsi/module-setup.sh | 31 ++++++++++
modules.d/95iscsi/parse-iscsiroot.sh | 13 +++-
4 files changed, 125 insertions(+), 37 deletions(-)
diff --git a/modules.d/95iscsi/cleanup-iscsi.sh b/modules.d/95iscsi/cleanup-iscsi.sh
index e97d65a..bfc8aef 100755
--- a/modules.d/95iscsi/cleanup-iscsi.sh
+++ b/modules.d/95iscsi/cleanup-iscsi.sh
@@ -1,4 +1,4 @@
#!/bin/sh
-[ -e /sys/module/bnx2i ] && killproc iscsiuio
+[ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && killproc iscsiuio
diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
index 460e438..fc62425 100755
--- a/modules.d/95iscsi/iscsiroot.sh
+++ b/modules.d/95iscsi/iscsiroot.sh
@@ -36,7 +36,7 @@ iroot=${iroot#:}
# figured out a way how to check whether this is built-in or not
modprobe crc32c 2>/dev/null
-if [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then
+if [ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then
iscsiuio
> /tmp/iscsiuio-started
fi
@@ -105,28 +105,47 @@ handle_netroot()
parse_iscsi_root "$1" || return 1
+ # Bail out early, if there is no route to the destination
+ if is_ip "$iscsi_target_ip" && [ "$netif" != "dummy" ] && ! all_ifaces_up && getargbool 1 rd.iscsi.testroute; then
+ ip route get "$iscsi_target_ip" >/dev/null 2>&1 || return 0
+ fi
+
# XXX is this needed?
getarg ro && iscsirw=ro
getarg rw && iscsirw=rw
fsopts=${fsopts:+$fsopts,}${iscsirw}
+ if [ -z $iscsi_initiator ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
+ iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
+ echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
+ rm -f /etc/iscsi/initiatorname.iscsi
+ mkdir -p /etc/iscsi
+ ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+ systemctl restart iscsid
+ sleep 1
+ > /tmp/iscsi_set_initiator
+ fi
+
if [ -z $iscsi_initiator ]; then
- # XXX Where are these from?
+ [ -f /run/initiatorname.iscsi ] && . /run/initiatorname.iscsi
[ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
[ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
iscsi_initiator=$InitiatorName
-
- # XXX rfc3720 says 'SCSI Initiator Name: The iSCSI Initiator Name specifies
- # the worldwide unique name of the initiator.' Could we use hostname/ip
- # if missing?
fi
if [ -z $iscsi_initiator ]; then
- if [ -f /sys/firmware/ibft/initiator/initiator-name ]; then
- iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
- fi
+ iscsi_initiator=$(iscsi-iname)
+ echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
+ rm -f /etc/iscsi/initiatorname.iscsi
+ mkdir -p /etc/iscsi
+ ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+ systemctl restart iscsid
+ > /tmp/iscsi_set_initiator
+ # FIXME: iscsid is not yet ready, when the service is :-/
+ sleep 1
fi
+
if [ -z $iscsi_target_port ]; then
iscsi_target_port=3260
fi
@@ -135,23 +154,21 @@ handle_netroot()
iscsi_target_group=1
fi
- if [ -z $iscsi_initiator ]; then
- # XXX is this correct?
- iscsi_initiator=$(iscsi-iname)
- fi
-
if [ -z $iscsi_lun ]; then
iscsi_lun=0
fi
- echo "InitiatorName='$iscsi_initiator'" > /run/initiatorname.iscsi
+ echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
-
+ if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
+ mkdir -p /etc/iscsi
+ ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+ fi
# FIXME $iscsi_protocol??
- if [ "$root" = "dhcp" ]; then
+ if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ]; then
# if root is not specified try to mount the whole iSCSI LUN
- printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' $iscsi_lun >> /etc/udev/rules.d/99-iscsi-root.rules
+ printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' "$iscsi_lun" >> /etc/udev/rules.d/99-iscsi-root.rules
udevadm control --reload
write_fs_tab /dev/root
wait_for_dev -n /dev/root
@@ -161,29 +178,58 @@ handle_netroot()
echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > $hookdir/mount/01-$$-iscsi.sh
fi
- # force udevsettle to break
- > $hookdir/initqueue/work
-
- iscsistart -i $iscsi_initiator -t $iscsi_target_name \
- -g $iscsi_target_group -a $iscsi_target_ip \
- -p $iscsi_target_port \
- ${iscsi_username:+-u $iscsi_username} \
- ${iscsi_password:+-w $iscsi_password} \
- ${iscsi_in_username:+-U $iscsi_in_username} \
- ${iscsi_in_password:+-W $iscsi_in_password} \
- ${iscsi_iface_name:+--param iface.iscsi_ifacename=$iscsi_iface_name} \
- ${iscsi_netdev_name:+--param iface.net_ifacename=$iscsi_netdev_name} \
- ${iscsi_param} \
- || :
-
+ if [ -n "$DRACUT_SYSTEMD" ] && command -v systemd-run >/dev/null 2>&1; then
+ netroot_enc=$(systemd-escape "iscsistart_${1}")
+ status=$(systemctl is-active "$netroot_enc" 2>/dev/null)
+ is_active=$?
+ if [ $is_active -ne 0 ]; then
+ if [ "$status" != "activating" ] && ! systemctl is-failed "$netroot_enc" >/dev/null 2>&1; then
+ systemd-run --no-block --service-type=oneshot --remain-after-exit --quiet \
+ --description="Login iSCSI Target $iscsi_target_name" \
+ --unit="$netroot_enc" -- \
+ $(command -v iscsistart) \
+ -i $iscsi_initiator -t $iscsi_target_name \
+ -g $iscsi_target_group -a $iscsi_target_ip \
+ -p $iscsi_target_port \
+ ${iscsi_username:+-u $iscsi_username} \
+ ${iscsi_password:+-w $iscsi_password} \
+ ${iscsi_in_username:+-U $iscsi_in_username} \
+ ${iscsi_in_password:+-W $iscsi_in_password} \
+ ${iscsi_iface_name:+--param iface.iscsi_ifacename=$iscsi_iface_name} \
+ ${iscsi_netdev_name:+--param iface.net_ifacename=$iscsi_netdev_name} \
+ ${iscsi_param} >/dev/null 2>&1
+ else
+ systemctl --no-block restart "$netroot_enc" >/dev/null 2>&1
+ fi
+ fi
+ else
+ > $hookdir/initqueue/work
+ iscsistart -i $iscsi_initiator -t $iscsi_target_name \
+ -g $iscsi_target_group -a $iscsi_target_ip \
+ -p $iscsi_target_port \
+ ${iscsi_username:+-u $iscsi_username} \
+ ${iscsi_password:+-w $iscsi_password} \
+ ${iscsi_in_username:+-U $iscsi_in_username} \
+ ${iscsi_in_password:+-W $iscsi_in_password} \
+ ${iscsi_iface_name:+--param iface.iscsi_ifacename=$iscsi_iface_name} \
+ ${iscsi_netdev_name:+--param iface.net_ifacename=$iscsi_netdev_name} \
+ ${iscsi_param} \
+ || :
+ fi
netroot_enc=$(str_replace "$1" '/' '\2f')
echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}"
+ return 0
}
ret=0
+if [ "$netif" != "dummy" ] && getargbool 1 rd.iscsi.waitnet; then
+ all_ifaces_up || exit 0
+fi
+
# loop over all netroot parameter
-if getarg netroot; then
+netroot=$(getarg netroot)
+if [ $? -eq 0 ] && [ "$netroot" != "dhcp" ]; then
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
nroot="${nroot##iscsi:}"
@@ -210,6 +256,6 @@ fi
need_shutdown
-# now we have a root filesystem somewhere in /dev/sda*
+# now we have a root filesystem somewhere in /dev/sd*
# let the normal block handler handle root=
exit $ret
diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh
index 406a9da..3002591 100755
--- a/modules.d/95iscsi/module-setup.sh
+++ b/modules.d/95iscsi/module-setup.sh
@@ -226,6 +226,37 @@ install() {
inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot"
if ! dracut_module_included "systemd"; then
inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh"
+ else
+ inst_multiple -o \
+ $systemdsystemunitdir/iscsi.service \
+ $systemdsystemunitdir/iscsid.service \
+ $systemdsystemunitdir/iscsid.socket \
+ $systemdsystemunitdir/iscsiuio.service \
+ $systemdsystemunitdir/iscsiuio.socket \
+ iscsiadm iscsid
+
+ mkdir -p "${initdir}/$systemdsystemunitdir/sockets.target.wants"
+ for i in \
+ iscsiuio.socket \
+ ; do
+ ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/sockets.target.wants/${i}"
+ done
+
+ mkdir -p "${initdir}/$systemdsystemunitdir/basic.target.wants"
+ for i in \
+ iscsid.service \
+ ; do
+ ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/basic.target.wants/${i}"
+ done
+
+ # Make sure iscsid is started after dracut-cmdline and ready for the initqueue
+ mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.service.d"
+ (
+ echo "[Unit]"
+ echo "After=dracut-cmdline.service"
+ echo "Before=dracut-initqueue.service"
+ ) > "${initdir}/$systemdsystemunitdir/iscsid.service.d/dracut.conf"
fi
+
dracut_need_initqueue
}
diff --git a/modules.d/95iscsi/parse-iscsiroot.sh b/modules.d/95iscsi/parse-iscsiroot.sh
index 52f7a97..2532ada 100755
--- a/modules.d/95iscsi/parse-iscsiroot.sh
+++ b/modules.d/95iscsi/parse-iscsiroot.sh
@@ -62,9 +62,10 @@ if [ -n "$iscsi_firmware" ] ; then
[ -z "$netroot" ] && netroot=iscsi:
modprobe -b -q iscsi_boot_sysfs 2>/dev/null
modprobe -b -q iscsi_ibft
- initqueue --onetime --timeout /sbin/iscsiroot dummy "$netroot" "$NEWROOT"
fi
+initqueue --onetime --timeout /sbin/iscsiroot dummy "$netroot" "$NEWROOT"
+
# If it's not iscsi we don't continue
[ "${netroot%%:*}" = "iscsi" ] || return
@@ -86,6 +87,16 @@ if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; the
fi
fi
+if arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) && [ -n "$arg" ]; then
+ iscsi_initiator=$arg
+ echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
+ ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
+ if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
+ mkdir -p /etc/iscsi
+ ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
+ fi
+fi
+
if [ -n "$iscsi_firmware" ] ; then
echo "[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
else