dracut/0012.patch
Harald Hoyer 02dec61359 dracut - 049-25.git20181204
- git snapshot
2018-12-04 11:22:13 +01:00

157 lines
6.9 KiB
Diff

From f18d069d4664c148df8563139b358806ecfe6799 Mon Sep 17 00:00:00 2001
From: Pedro Monreal <pmgdeb@gmail.com>
Date: Thu, 8 Nov 2018 14:15:38 +0100
Subject: [PATCH] Fixed some SUSE specific typos and outputs
---
dracut.conf.5.asc | 2 +-
dracut.conf.d/suse.conf.example | 4 ++--
dracut.sh | 4 ++--
dracut.usage.asc | 6 +++---
mkinitrd-suse.sh | 4 ++--
modules.d/98dracut-systemd/dracut-shutdown.service.8.asc | 2 +-
modules.d/98syslog/README | 2 +-
modules.d/99base/dracut-lib.sh | 2 +-
8 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/dracut.conf.5.asc b/dracut.conf.5.asc
index 1dfa28f6..081ed70c 100644
--- a/dracut.conf.5.asc
+++ b/dracut.conf.5.asc
@@ -157,7 +157,7 @@ provide a valid _/etc/fstab_.
archive. This cpio archive gets glued (concatenated, uncompressed one
must be the first one) to the compressed cpio archive. The first,
uncompressed cpio archive is for data which the kernel must be able
- to access very early (and cannot make use of uncompress alogrithms yet)
+ to access very early (and cannot make use of uncompress algorithms yet)
like microcode or ACPI tables (default=no).
*acpi_table_dir=*"__<dir>__"::
diff --git a/dracut.conf.d/suse.conf.example b/dracut.conf.d/suse.conf.example
index 37ffd72b..b5d962db 100644
--- a/dracut.conf.d/suse.conf.example
+++ b/dracut.conf.d/suse.conf.example
@@ -1,6 +1,6 @@
-# SUSE specifc dracut settings
+# SUSE specific dracut settings
#
-# SUSE by default always builds a as small as possible initrd for performance
+# SUSE by default always builds as small as possible initrd for performance
# and resource reasons.
# If you like to build a generic initrd which works on other platforms than
# on the one dracut/mkinitrd got called comment out below setting(s).
diff --git a/dracut.sh b/dracut.sh
index fb50cfda..e706714e 100755
--- a/dracut.sh
+++ b/dracut.sh
@@ -1690,7 +1690,7 @@ if [[ $early_microcode = yes ]]; then
for _fwdir in $fw_dir; do
if [[ -d $_fwdir && -d $_fwdir/$_fw ]]; then
_src="*"
- dinfo "*** Constructing ${ucode_dest[$idx]} ****"
+ dinfo "*** Constructing ${ucode_dest[$idx]} ***"
if [[ $hostonly ]]; then
_src=$(get_ucode_file)
[[ $_src ]] || break
@@ -1790,7 +1790,7 @@ if dracut_module_included "squash"; then
# Move some files out side of the squash image, including:
# - Files required to boot and mount the squashfs image
- # - Files need to be accessable without mounting the squash image
+ # - Files need to be accessible without mounting the squash image
required_in_root() {
local file=$1
local _sqsh_file=$squash_dir/$file
diff --git a/dracut.usage.asc b/dracut.usage.asc
index 2b598ee6..0f219fc9 100644
--- a/dracut.usage.asc
+++ b/dracut.usage.asc
@@ -83,7 +83,7 @@ on the command line:
=== Adding Kernel Modules
If you need a special kernel module in the initramfs, which is not
automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or the drivers vaiable in the _/etc/dracut.conf_
+on the command line or the drivers variable in the _/etc/dracut.conf_
or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
----
# dracut --add-drivers mymod initramfs-with-mymod.img
@@ -94,7 +94,7 @@ An initramfs generated without the "hostonly" mode, does not contain any system
configuration files (except for some special exceptions), so the configuration
has to be done on the kernel command line. With this flexibility, you can easily
boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
+image. So, you could completely change your root partition (move it inside a md
raid with encryption and LVM on top), as long as you specify the correct
filesystem LABEL or UUID on the kernel command line for your root device, dracut
will find it and boot from it.
@@ -185,7 +185,7 @@ This turns off every automatic assembly of LVM, MD raids, DM raids and
crypto LUKS.
Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
+process, but then you would lose the possibility to turn it on on demand.
[[Injecting]]
diff --git a/mkinitrd-suse.sh b/mkinitrd-suse.sh
index 20d85da1..b6af2b19 100755
--- a/mkinitrd-suse.sh
+++ b/mkinitrd-suse.sh
@@ -1,6 +1,6 @@
#!/bin/bash --norc
#
-# mkinitrd compability wrapper for SUSE.
+# mkinitrd compatibility wrapper for SUSE.
#
# Copyright (c) 2013 SUSE Linux Products GmbH. All rights reserved.
#
@@ -62,7 +62,7 @@ usage () {
$cmd " /etc/sysconfig/kernel."
$cmd " -d root_device Root device. Defaults to the device from"
$cmd " which / is mounted. Overrides the rootdev"
- $cmd " enviroment variable if set."
+ $cmd " environment variable if set."
$cmd " -j device Journal device"
$cmd " -D interface Run dhcp on the specified interface."
$cmd " -I interface Configure the specified interface statically."
diff --git a/modules.d/98dracut-systemd/dracut-shutdown.service.8.asc b/modules.d/98dracut-systemd/dracut-shutdown.service.8.asc
index f4fbb618..ba80b187 100644
--- a/modules.d/98dracut-systemd/dracut-shutdown.service.8.asc
+++ b/modules.d/98dracut-systemd/dracut-shutdown.service.8.asc
@@ -15,7 +15,7 @@ dracut-shutdown.service
DESCRIPTION
-----------
This service unpacks the initramfs image to /run/initramfs.
-systemd pivots into /run/initramfs at shutdown, so the root filesytem
+systemd pivots into /run/initramfs at shutdown, so the root filesystem
can be safely unmounted.
The following steps are executed during a shutdown:
diff --git a/modules.d/98syslog/README b/modules.d/98syslog/README
index 30a819c0..9eb5adee 100644
--- a/modules.d/98syslog/README
+++ b/modules.d/98syslog/README
@@ -11,7 +11,7 @@ Then if syslog is configured it is started and will forward all
kernel messages to the given syslog server.
The syslog implementation is detected automatically by finding the
-apropriate binary with the following order:
+appropriate binary with the following order:
rsyslogd
syslogd
syslog-ng
diff --git a/modules.d/99base/dracut-lib.sh b/modules.d/99base/dracut-lib.sh
index ab348855..3eb255e6 100755
--- a/modules.d/99base/dracut-lib.sh
+++ b/modules.d/99base/dracut-lib.sh
@@ -620,7 +620,7 @@ nfsroot_to_var() {
# prints:
# ENV{ID_FS_LABEL}="boot"
#
-# TOOD: symlinks
+# TODO: symlinks
udevmatch() {
case "$1" in
UUID=????????-????-????-????-????????????|LABEL=*|PARTLABEL=*|PARTUUID=????????-????-????-????-????????????)