rpms/dracut
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3b4ce4f9aa
dracut/0002-Revert-Add-flag-to-toggle-hostonly-cmdline-storing-i.patch
Adam Williamson 2fa76e2882 revert bad upstream changes that cause RHBZ #1084766
2014-04-21 09:23:24 -07:00

230 lines
9.0 KiB
Diff
Raw Blame History

From dda971e5260bd2401e79461135e6c44af01da568 Mon Sep 17 00:00:00 2001
From: Adam Williamson <awilliam@redhat.com>
Date: Thu, 17 Apr 2014 18:55:31 -0700
Subject: [PATCH 2/2] Revert "Add flag to toggle hostonly cmdline storing in
the initramfs"
This reverts commit ab9457efd78ff74c654b4123956cdbd131935066.
---
dracut.8.asc | 6 ------
dracut.conf.5.asc | 3 ---
dracut.sh | 18 +++-------------
modules.d/90crypt/module-setup.sh | 6 ++----
modules.d/90dmraid/module-setup.sh | 6 ++----
modules.d/90lvm/module-setup.sh | 6 ++----
modules.d/90mdraid/module-setup.sh | 6 ++----
modules.d/95rootfs-block/module-setup.sh | 37 ++++++++++++--------------------
8 files changed, 25 insertions(+), 63 deletions(-)
diff --git a/dracut.8.asc b/dracut.8.asc
index 14ce26b..583a6dd 100644
--- a/dracut.8.asc
+++ b/dracut.8.asc
@@ -300,12 +300,6 @@ provide a valid _/etc/fstab_.
**-N, --no-hostonly**::
Disable Host-Only mode
-**--hostonly-cmdline**:
- Store kernel command line arguments needed in the initramfs
-
-**--no-hostonly-cmdline**:
- Do not store kernel command line arguments needed in the initramfs
-
**--persistent-policy** _<policy>_::
Use _<policy>_ to address disks and partitions.
_<policy>_ can be any directory name found in /dev/disk.
diff --git a/dracut.conf.5.asc b/dracut.conf.5.asc
index be62da9..5c94118 100644
--- a/dracut.conf.5.asc
+++ b/dracut.conf.5.asc
@@ -76,9 +76,6 @@ Configuration files must have the extension .conf; other extensions are ignored.
Host-Only mode: Install only what is needed for booting the local host
instead of a generic host and generate host-specific configuration.
-*hostonly_cmdline*"__{yes|no}__"::
- If set, store the kernel command line arguments needed in the initramfs
-
*persistent_policy=*"__<policy>__"::
Use _<policy>_ to address disks and partitions.
_<policy>_ can be any directory name found in /dev/disk.
diff --git a/dracut.sh b/dracut.sh
index 1899db9..1b33165 100755
--- a/dracut.sh
+++ b/dracut.sh
@@ -137,10 +137,6 @@ Creates initial ramdisk images for preloading modules
-H, --hostonly Host-Only mode: Install only what is needed for
booting the local host instead of a generic host.
-N, --no-hostonly Disables Host-Only mode
- --hostonly-cmdline Store kernel command line arguments needed
- in the initramfs
- --no-hostonly-cmdline Do not store kernel command line arguments needed
- in the initramfs
--persistent-policy [POLICY]
Use [POLICY] to address disks and partitions.
POLICY can be any directory name found in /dev/disk.
@@ -492,12 +488,9 @@ while :; do
-f|--force) force=yes;;
--kernel-only) kernel_only="yes"; no_kernel="no";;
--no-kernel) kernel_only="no"; no_kernel="yes";;
- --print-cmdline)
- print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";;
- --early-microcode)
- early_microcode_l="yes";;
- --no-early-microcode)
- early_microcode_l="no";;
+ --print-cmdline) print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";;
+ --early-microcode) early_microcode_l="yes";;
+ --no-early-microcode) early_microcode_l="no";;
--strip) do_strip_l="yes";;
--nostrip) do_strip_l="no";;
--prelink) do_prelink_l="yes";;
@@ -524,10 +517,6 @@ while :; do
hostonly_l="yes" ;;
-N|--no-hostonly|--no-host-only)
hostonly_l="no" ;;
- --hostonly-cmdline)
- hostonly_cmdline_l="yes" ;;
- --no-hostonly-cmdline)
- hostonly_cmdline_l="no" ;;
--persistent-policy)
persistent_policy_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--fstab) use_fstab_l="yes" ;;
@@ -766,7 +755,6 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
[[ $prefix_l ]] && prefix=$prefix_l
[[ $prefix = "/" ]] && unset prefix
[[ $hostonly_l ]] && hostonly=$hostonly_l
-[[ $hostonly_cmdline_l ]] && hostonly_cmdline=$hostonly_cmdline_l
[[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l
[[ $use_fstab_l ]] && use_fstab=$use_fstab_l
[[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
diff --git a/modules.d/90crypt/module-setup.sh b/modules.d/90crypt/module-setup.sh
index 5707404..21d49c4 100755
--- a/modules.d/90crypt/module-setup.sh
+++ b/modules.d/90crypt/module-setup.sh
@@ -51,10 +51,8 @@ cmdline() {
# called by dracut
install() {
- if [[ $hostonly_cmdline == "yes" ]]; then
- cmdline >> "${initdir}/etc/cmdline.d/90crypt.conf"
- echo >> "${initdir}/etc/cmdline.d/90crypt.conf"
- fi
+ cmdline >> "${initdir}/etc/cmdline.d/90crypt.conf"
+ echo >> "${initdir}/etc/cmdline.d/90crypt.conf"
inst_multiple cryptsetup rmdir readlink umount
inst_script "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
diff --git a/modules.d/90dmraid/module-setup.sh b/modules.d/90dmraid/module-setup.sh
index aebb28d..d3888a4 100755
--- a/modules.d/90dmraid/module-setup.sh
+++ b/modules.d/90dmraid/module-setup.sh
@@ -65,10 +65,8 @@ cmdline() {
install() {
local _i
- if [[ $hostonly_cmdline == "yes" ]]; then
- cmdline >> "${initdir}/etc/cmdline.d/90dmraid.conf"
- echo >> "${initdir}/etc/cmdline.d/90dmraid.conf"
- fi
+ cmdline >> "${initdir}/etc/cmdline.d/90dmraid.conf"
+ echo >> "${initdir}/etc/cmdline.d/90dmraid.conf"
inst_multiple dmraid
inst_multiple -o kpartx
diff --git a/modules.d/90lvm/module-setup.sh b/modules.d/90lvm/module-setup.sh
index 5b810b9..781dfa4 100755
--- a/modules.d/90lvm/module-setup.sh
+++ b/modules.d/90lvm/module-setup.sh
@@ -50,10 +50,8 @@ install() {
inst lvm
- if [[ $hostonly_cmdline == "yes" ]]; then
- cmdline >> "${initdir}/etc/cmdline.d/90lvm.conf"
- echo >> "${initdir}/etc/cmdline.d/90lvm.conf"
- fi
+ cmdline >> "${initdir}/etc/cmdline.d/90lvm.conf"
+ echo >> "${initdir}/etc/cmdline.d/90lvm.conf"
inst_rules "$moddir/64-lvm.rules"
diff --git a/modules.d/90mdraid/module-setup.sh b/modules.d/90mdraid/module-setup.sh
index ac745d1..7d72098 100755
--- a/modules.d/90mdraid/module-setup.sh
+++ b/modules.d/90mdraid/module-setup.sh
@@ -70,10 +70,8 @@ install() {
inst $(command -v partx) /sbin/partx
inst $(command -v mdadm) /sbin/mdadm
- if [[ $hostonly_cmdline == "yes" ]]; then
- cmdline >> "${initdir}/etc/cmdline.d/90mdraid.conf"
- echo >> "${initdir}/etc/cmdline.d/90mdraid.conf"
- fi
+ cmdline >> "${initdir}/etc/cmdline.d/90mdraid.conf"
+ echo >> "${initdir}/etc/cmdline.d/90mdraid.conf"
# <mdadm-3.3 udev rule
inst_rules 64-md-raid.rules
diff --git a/modules.d/95rootfs-block/module-setup.sh b/modules.d/95rootfs-block/module-setup.sh
index b209ab6..7bd0d2f 100755
--- a/modules.d/95rootfs-block/module-setup.sh
+++ b/modules.d/95rootfs-block/module-setup.sh
@@ -12,25 +12,6 @@ depends() {
echo fs-lib
}
-cmdline_journal() {
- if [[ $hostonly ]]; then
- for dev in "${!host_fs_types[@]}"; do
- [[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
- rootopts=$(find_dev_fsopts "$dev")
- if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
- journaldev=$(fs_get_option $rootopts "jdev")
- elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
- journaldev=$(fs_get_option $rootopts "logdev")
- fi
-
- if [ -n "$journaldev" ]; then
- printf " root.journaldev=%s" "$journaldev"
- fi
- done
- fi
- return 0
-}
-
# called by dracut
cmdline() {
local dev=/dev/block/$(find_root_block_device)
@@ -39,14 +20,24 @@ cmdline() {
printf " rootflags=%s" "$(find_mp_fsopts /)"
printf " rootfstype=%s" "$(find_mp_fstype /)"
fi
- cmdline_journal
}
# called by dracut
install() {
- if [[ $hostonly_cmdline == "yes" ]]; then
- cmdline_journal | while read journaldev; do
- [[ $journaldev ]] && printf "%s\n" "$journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf"
+
+ if [[ $hostonly ]]; then
+ for dev in "${!host_fs_types[@]}"; do
+ [[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
+ rootopts=$(find_dev_fsopts "$dev")
+ if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
+ journaldev=$(fs_get_option $rootopts "jdev")
+ elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
+ journaldev=$(fs_get_option $rootopts "logdev")
+ fi
+
+ if [ -n "$journaldev" ]; then
+ printf "%s\n" "root.journaldev=$journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf"
+ fi
done
fi
--
1.9.0
Reference in New Issue View Git Blame Copy Permalink