crypto-utils/NSPRerrs.h
2008-05-03 22:54:55 +00:00

154 lines
7.3 KiB
C

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/* General NSPR 2.0 errors */
/* Caller must #include "<rerror.h> */
ER2( PR_OUT_OF_MEMORY_ERROR, "Memory allocation attempt failed." )
ER2( PR_BAD_DESCRIPTOR_ERROR, "Invalid file descriptor." )
ER2( PR_WOULD_BLOCK_ERROR, "The operation would have blocked." )
ER2( PR_ACCESS_FAULT_ERROR, "Invalid memory address argument." )
ER2( PR_INVALID_METHOD_ERROR, "Invalid function for file type." )
ER2( PR_ILLEGAL_ACCESS_ERROR, "Invalid memory address argument." )
ER2( PR_UNKNOWN_ERROR, "Some unknown error has occurred." )
ER2( PR_PENDING_INTERRUPT_ERROR,"Operation interrupted by another thread." )
ER2( PR_NOT_IMPLEMENTED_ERROR, "function not implemented." )
ER2( PR_IO_ERROR, "I/O function error." )
ER2( PR_IO_TIMEOUT_ERROR, "I/O operation timed out." )
ER2( PR_IO_PENDING_ERROR, "I/O operation on busy file descriptor." )
ER2( PR_DIRECTORY_OPEN_ERROR, "The directory could not be opened." )
ER2( PR_INVALID_ARGUMENT_ERROR, "Invalid function argument." )
ER2( PR_ADDRESS_NOT_AVAILABLE_ERROR, "Network address not available (in use?)." )
ER2( PR_ADDRESS_NOT_SUPPORTED_ERROR, "Network address type not supported." )
ER2( PR_IS_CONNECTED_ERROR, "Already connected." )
ER2( PR_BAD_ADDRESS_ERROR, "Network address is invalid." )
ER2( PR_ADDRESS_IN_USE_ERROR, "Local Network address is in use." )
ER2( PR_CONNECT_REFUSED_ERROR, "Connection refused by peer." )
ER2( PR_NETWORK_UNREACHABLE_ERROR, "Network address is presently unreachable." )
ER2( PR_CONNECT_TIMEOUT_ERROR, "Connection attempt timed out." )
ER2( PR_NOT_CONNECTED_ERROR, "Network file descriptor is not connected." )
ER2( PR_LOAD_LIBRARY_ERROR, "Failure to load dynamic library." )
ER2( PR_UNLOAD_LIBRARY_ERROR, "Failure to unload dynamic library." )
ER2( PR_FIND_SYMBOL_ERROR,
"Symbol not found in any of the loaded dynamic libraries." )
ER2( PR_INSUFFICIENT_RESOURCES_ERROR, "Insufficient system resources." )
ER2( PR_DIRECTORY_LOOKUP_ERROR,
"A directory lookup on a network address has failed." )
ER2( PR_TPD_RANGE_ERROR,
"Attempt to access a TPD key that is out of range." )
ER2( PR_PROC_DESC_TABLE_FULL_ERROR, "Process open FD table is full." )
ER2( PR_SYS_DESC_TABLE_FULL_ERROR, "System open FD table is full." )
ER2( PR_NOT_SOCKET_ERROR,
"Network operation attempted on non-network file descriptor." )
ER2( PR_NOT_TCP_SOCKET_ERROR,
"TCP-specific function attempted on a non-TCP file descriptor." )
ER2( PR_SOCKET_ADDRESS_IS_BOUND_ERROR, "TCP file descriptor is already bound." )
ER2( PR_NO_ACCESS_RIGHTS_ERROR, "Access Denied." )
ER2( PR_OPERATION_NOT_SUPPORTED_ERROR,
"The requested operation is not supported by the platform." )
ER2( PR_PROTOCOL_NOT_SUPPORTED_ERROR,
"The host operating system does not support the protocol requested." )
ER2( PR_REMOTE_FILE_ERROR, "Access to the remote file has been severed." )
ER2( PR_BUFFER_OVERFLOW_ERROR,
"The value requested is too large to be stored in the data buffer provided." )
ER2( PR_CONNECT_RESET_ERROR, "TCP connection reset by peer." )
ER2( PR_RANGE_ERROR, "Unused." )
ER2( PR_DEADLOCK_ERROR, "The operation would have deadlocked." )
ER2( PR_FILE_IS_LOCKED_ERROR, "The file is already locked." )
ER2( PR_FILE_TOO_BIG_ERROR,
"Write would result in file larger than the system allows." )
ER2( PR_NO_DEVICE_SPACE_ERROR, "The device for storing the file is full." )
ER2( PR_PIPE_ERROR, "Unused." )
ER2( PR_NO_SEEK_DEVICE_ERROR, "Unused." )
ER2( PR_IS_DIRECTORY_ERROR,
"Cannot perform a normal file operation on a directory." )
ER2( PR_LOOP_ERROR, "Symbolic link loop." )
ER2( PR_NAME_TOO_LONG_ERROR, "File name is too long." )
ER2( PR_FILE_NOT_FOUND_ERROR, "File not found." )
ER2( PR_NOT_DIRECTORY_ERROR,
"Cannot perform directory operation on a normal file." )
ER2( PR_READ_ONLY_FILESYSTEM_ERROR,
"Cannot write to a read-only file system." )
ER2( PR_DIRECTORY_NOT_EMPTY_ERROR,
"Cannot delete a directory that is not empty." )
ER2( PR_FILESYSTEM_MOUNTED_ERROR,
"Cannot delete or rename a file object while the file system is busy." )
ER2( PR_NOT_SAME_DEVICE_ERROR,
"Cannot rename a file to a file system on another device." )
ER2( PR_DIRECTORY_CORRUPTED_ERROR,
"The directory object in the file system is corrupted." )
ER2( PR_FILE_EXISTS_ERROR,
"Cannot create or rename a filename that already exists." )
ER2( PR_MAX_DIRECTORY_ENTRIES_ERROR,
"Directory is full. No additional filenames may be added." )
ER2( PR_INVALID_DEVICE_STATE_ERROR,
"The required device was in an invalid state." )
ER2( PR_DEVICE_IS_LOCKED_ERROR, "The device is locked." )
ER2( PR_NO_MORE_FILES_ERROR, "No more entries in the directory." )
ER2( PR_END_OF_FILE_ERROR, "Encountered end of file." )
ER2( PR_FILE_SEEK_ERROR, "Seek error." )
ER2( PR_FILE_IS_BUSY_ERROR, "The file is busy." )
ER2( PR_IN_PROGRESS_ERROR,
"Operation is still in progress (probably a non-blocking connect)." )
ER2( PR_ALREADY_INITIATED_ERROR,
"Operation has already been initiated (probably a non-blocking connect)." )
#ifdef PR_GROUP_EMPTY_ERROR
ER2( PR_GROUP_EMPTY_ERROR, "The wait group is empty." )
#endif
#ifdef PR_INVALID_STATE_ERROR
ER2( PR_INVALID_STATE_ERROR, "Object state improper for request." )
#endif
#ifdef PR_NETWORK_DOWN_ERROR
ER2( PR_NETWORK_DOWN_ERROR, "Network is down." )
#endif
#ifdef PR_SOCKET_SHUTDOWN_ERROR
ER2( PR_SOCKET_SHUTDOWN_ERROR, "The socket was previously shut down." )
#endif
#ifdef PR_CONNECT_ABORTED_ERROR
ER2( PR_CONNECT_ABORTED_ERROR, "TCP Connection aborted." )
#endif
#ifdef PR_HOST_UNREACHABLE_ERROR
ER2( PR_HOST_UNREACHABLE_ERROR, "Host is unreachable." )
#endif
/* always last */
ER2( PR_MAX_ERROR, "Placeholder for the end of the list" )