updated

README.fedora

@@ -1,5 +1,42 @@
-Add
+A clamav-milter setup consists of the following three components:
+
+* the clamav-milter itself
+
+  --> this is provided by the 'clamav-milter' package plus (alternatively)
+      'clamav-milter-upstart' or 'clamav-milter-sysvinit'
+
+  The main configuration is in /etc/mail/clamav-milter.conf and MUST
+  be changed before first use.
+
+  The -sysvinit package is managed by the traditional tools, but
+  -upstart requires modification of /etc/event.d/clamav-milter to
+  enable automatic startup.  See comments there for more details.
+
+* a clamav scanner daemon
+
+  --> this package is called 'clamav-scanner' plus (alternatively)
+      'clamav-scanner-upstart' or 'clamav-scanner-sysvinit'
+
+  The daemon is configured by /etc/clamd.d/scan.conf (which MUST be
+  edited before first use).
+
+  The -sysvinit package is managed by the traditional tools, but
+  -upstart requires modification of /etc/event.d/clamd.scan to enable
+  automatic startup.  See comments there for more details.
+
+* the MDA (sendmail/postfix)
+
+  --> you should know how to install this...
+
+  When communicating across unix sockets with the clamav-milter, it is
+  suggested to use the /var/run/clamav-milter/clamav.sock path.  You
+  have to add something like
 
     INPUT_MAIL_FILTER(`clamav', `S=local:/var/run/clamav-milter/clamav.sock, F=, T=S:4m;R:4m')dnl
 
   to your sendmail.mc.
+
+
+
+It is suggested that components communicate through TCP sockets as
+this eases setup.  Please add corresponding packet filter rules!

clamav-0.95rc1-umask.patch

@@ -0,0 +1,39 @@
+Index: clamav-0.95rc1/clamav-milter/clamav-milter.c
+===================================================================
+--- clamav-0.95rc1.orig/clamav-milter/clamav-milter.c
++++ clamav-0.95rc1/clamav-milter/clamav-milter.c
+@@ -287,7 +287,7 @@ int main(int argc, char **argv) {
+ 
+     if((opt = optget(opts, "PidFile"))->enabled) {
+ 	FILE *fd;
+-	mode_t old_umask = umask(0006);
++	mode_t old_umask = umask(0022);
+ 
+ 	if((fd = fopen(opt->strarg, "w")) == NULL) {
+ 	    logg("!Can't save PID in file %s\n", opt->strarg);
+Index: clamav-0.95rc1/shared/output.c
+===================================================================
+--- clamav-0.95rc1.orig/shared/output.c
++++ clamav-0.95rc1/shared/output.c
+@@ -250,7 +250,7 @@ int logg(const char *str, ...)
+ #endif
+     if(logg_file) {
+ 	if(!logg_fp) {
+-	    old_umask = umask(0037);
++	    old_umask = umask(0077);
+ 	    if((logg_fp = fopen(logg_file, "at")) == NULL) {
+ 		umask(old_umask);
+ #ifdef CL_THREAD_SAFE
+Index: clamav-0.95rc1/freshclam/freshclam.c
+===================================================================
+--- clamav-0.95rc1.orig/freshclam/freshclam.c
++++ clamav-0.95rc1/freshclam/freshclam.c
+@@ -102,7 +102,7 @@ static void writepid(const char *pidfile
+ {
+ 	FILE *fd;
+ 	int old_umask;
+-    old_umask = umask(0006);
++    old_umask = umask(0022);
+     if((fd = fopen(pidfile, "w")) == NULL) {
+ 	logg("!Can't save PID to file %s: %s\n", pidfile, strerror(errno));
+     } else {

clamav-milter.sysv

@@ -11,7 +11,7 @@
 exec=/usr/sbin/clamav-milter
 prog="clamav-milter"
 
-OPTS=
+OPTS='-c /etc/mail/clamav-milter.conf'
 [ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog
 
 pidfile=/var/run/clamav-milter/milter.pid
@@ -21,8 +21,7 @@ start() {
     [ -x $exec ] || exit 5
     [ -f $config ] || exit 6
     echo -n $"Starting $prog: "
-    daemon --pidfile=${pidfile} \
-	   $exec $OPTS --nofork=no --pid=${pidfile} && success || failure
+    daemon --pidfile=${pidfile} $exec $OPTS --nofork=no --pid=${pidfile}
     retval=$?
     echo
     [ $retval -eq 0 ] && touch $lockfile
@@ -31,7 +30,7 @@ start() {
 
 stop() {
     echo -n $"Stopping $prog: "
-    killproc -o "${pidfile} $exec && success || failure
+    killproc -p "${pidfile}" $exec
     retval=$?
     echo
     [ $retval -eq 0 ] && rm -f $lockfile
@@ -53,7 +52,7 @@ force_reload() {
 
 rh_status() {
     # run checks to determine if the service is running or use generic status
-    status $prog
+    status -p "${pidfile}" $prog
 }
 
 rh_status_q() {

clamav-milter.upstart

@@ -16,4 +16,4 @@ stop  on runlevel 1
 stop  on runlevel 6
 
 respawn
-exec /usr/sbin/clamav-milter -c /etc/mail/clamav-milter --nofork=yes
+exec /usr/sbin/clamav-milter -c /etc/mail/clamav-milter.conf --nofork=yes

clamav.spec

@@ -21,7 +21,7 @@
 Summary:	End-user tools for the Clam Antivirus scanner
 Name:		clamav
 Version:	0.95
-Release:	%release_func 0.0.3%{?snapshot:.%snapshot}
+Release:	%release_func 0.1%{?snapshot:.%snapshot}
 
 License:	%{?with_unrar:proprietary}%{!?with_unrar:GPLv2}
 Group:		Applications/File

clamd-wrapper

@@ -42,7 +42,8 @@ prog="clamd.${CLAMD_SERVICE}"
 start () {
 	echo -n $"Starting $prog: "
 	daemon --pidfile=${CLAMD_PIDFILE} \
-	    $procname  ${CLAMD_CONFIGFILE:+-c $CLAMD_CONFIGFILE} ${CLAMD_OPTIONS} --pid ${CLAMD_PIDFILE}
+	    exec -a $procname /usr/sbin/clamd \
+	    ${CLAMD_CONFIGFILE:+-c $CLAMD_CONFIGFILE} ${CLAMD_OPTIONS} --pid ${CLAMD_PIDFILE}
 	RETVAL=$?
 	echo
 	[ $RETVAL -eq 0 ] && touch $lockfile

clamd.scan.upstart

@@ -12,4 +12,4 @@ stop  on runlevel 1
 stop  on runlevel 6
 
 respawn
-exec /usr/sbin/clamd -c /etc/clamd.d/clamd.scan --nofork=yes
+exec /usr/sbin/clamd -c /etc/clamd.d/scan.conf --nofork=yes