# Fedora review: http://bugzilla.redhat.com/1268716 # Option to enable SUBNODE mode (WIP) # Fedora generally runs on systems that easily support a full node %bcond_with subnode # Option to use the optimized libnacl embedded with cjdns # Required since v20 due to use of private cnacl APIs %bcond_without embedded # Option to enable CPU specific optimization # Default to generic for distro builds %bcond_without generic # Option to use libsodium instead of nacl (broken since v20) %bcond_with libsodium # Option to disable SECCOMP: confusing backward logic # Needed to run on openvz and other container systems %bcond_without seccomp # Option to use system libuv instead of bundled libuv-0.11.19 %bcond_with libuv %if %{with embedded} %global use_embedded 1 %else %global use_embedded 0 %endif %if %{with libuv} %global use_libuv 1 %else %global use_libuv 0 %endif %if %{with generic} %global generic_build 1 %else %global generic_build 0 %endif %if %{with libsodium} %global use_libsodium 1 %global nacl_name libsodium %global nacl_version 1.0.14 %global nacl_lib %{_libdir}/libsodium.so %else %global use_libsodium 0 %global nacl_name nacl %global nacl_version 20110221 %global nacl_lib %{_libdir}/libnacl.so %endif %if 0%{?rhel} >= 5 && 0%{?rhel} < 7 %global use_systemd 0 %else %global use_systemd 1 %endif %if 0%{?rhel} == 6 %global use_upstart 1 %else %global use_upstart 0 %endif %if 0 && 0%{?fedora} > 30 %global use_marked 1 %global makeman marked-man %else %global use_marked 0 %global makeman ../../ronn %endif # FIXME: Needs dependencies and install www dir someplace reasonable. %global with_admin 0 # FIXME: python tools need to make cjdnsadmin a proper python package %global with_python 1 %global __python %{__python2} %{!?__restorecon: %global __restorecon /sbin/restorecon} Name: cjdns # major version is cjdns protocol version: Version: 20.3 Release: 5%{?dist} Summary: The privacy-friendly network without borders # cjdns is all GPLv3 except libuv which is MIT and BSD and ISC # cnacl is unused except when use_embedded is true License: GPLv3 and MIT and BSD and ISC URL: http://hyperboria.net/ Source0: https://github.com/cjdelisle/cjdns/archive/%{name}-v%{version}.tar.gz Source1: cjdns.README_Fedora.md Source2: cjdns.service # nroff overlay for nodejs-marked Source3: https://github.com/kapouer/marked-man/archive/0.7.0.tar.gz#/marked-man-0.7.0.tar.gz # Add targeted selinux policy Patch0: cjdns.selinux.patch # Allow python2.6 for build. Python is not used during the build # process. The python tools allegedly depend on python2.7, but that can # be in Requires for the subpackage. Patch1: cjdns.el6.patch # Fix RLIMIT_NPROC - setuid() bug. In its low priv process, cjdroute calls # # setrlimit(RLIMIT_NPROC, &(struct rlimit){ 0, 0 }) # # which on recent kernels prevents fork() or exec() after the following # setuid(). This is due to changes discussed here: # # https://lwn.net/Articles/451985/ # # On the 2.6.32 kernel used by EL6, the above causes setuid() to fail. # This patch sets RLIMIT_NPROC to { 1, 1 } instead, which prevents # fork(), but not exec, and calls setgroups() before setuid(). Patch2: cjdns.nprocs.patch # Change defaults generated by cjdroute --genconf Patch4: cjdns.genconf.patch # Patch contributed init scripts to put cjdroute in /usr/sbin and # add additional service options. Patch5: cjdns.sbin.patch # Patch make.js to use dynamic nacl library Patch6: cjdns.dyn.patch # Patch to use _LINUX_CAPABILITY_3 (cjdns < 18) #Patch7: cjdns.cap3.patch # Patch some source files to ignore selected warnings that break gcc6 builds Patch8: cjdns.warnings.patch # Man pages Patch9: cjdns.man.patch # Patch some bugs in nodejs tools Patch10: cjdns.tools.patch # Alternate dynamic library patch to use libsodium Patch11: cjdns.sodium.patch # Disable WIP subnode code when SUBNODE not enabled Patch12: cjdns.sign.patch # Recognize ppc64, ppc64le, and s390x arches #Patch13: cjdns.ppc64.patch # getentropy(2) added to glibc in Fedora 26 # included in cjdns-20.1 #Patch14: cjdns.entropy.patch # Fix buffer overrun in JsonBencSerializer.c # included in cjdns-20.1 #Patch15: cjdns.benc.patch # Specify python2 for systems that default to python3 Patch16: cjdns.python3.patch # s390x support for embedded cnacl library from Dan Horák # Included upstream since 20.3 #Patch17: cjdns.s390x.patch # patch build to use system libuv Patch18: cjdns.libuv.patch Patch19: cjdns.fuzz.patch # patch to use /proc/sys/kernel/random/uuid instead of sysctl Patch20: cjdns.sysctl.patch # Patch ronn to stop using deprecated util.puts and util.debug Patch21: cjdns.puts.patch %if %{use_marked} BuildRequires: nodejs, nodejs-marked, python2 %else BuildRequires: nodejs, nodejs-ronn, python2 %endif # Automated package review hates explicit BR on make, but it *is* needed BuildRequires: make gcc %if !0%{use_embedded} # x86_64 and ARM libnacl are not compiled with -fPIC before Fedora release 11. BuildRequires: %{nacl_name}-devel >= %{nacl_version} %endif %if %{use_systemd} # systemd macros are not defined unless systemd is present BuildRequires: systemd Requires: systemd Requires(post): systemd Requires(preun): systemd Requires(postun): systemd %endif Requires(pre): shadow-utils %if 0%{use_libuv} BuildRequires: libuv-devel %else Provides: bundled(libuv) = 0.11.19 %endif %if 0%{use_embedded} Provides: bundled(nacl) = 20110221 %endif # build system requires nodejs, unfortunately ExclusiveArch: %{nodejs_arches} %description Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. %package selinux Summary: Targeted SELinux policy module for cjdns BuildRequires: policycoreutils, checkpolicy, selinux-policy-devel Requires: policycoreutils, selinux-policy-targeted Requires: %{name} = %{version}-%{release} BuildArch: noarch %description selinux Targeted SELinux policy module for cjdns. # FIXME: keep C tools separate? %package tools Summary: Nodejs tools for cjdns Requires: nodejs, %{name} = %{version}-%{release} BuildArch: noarch %description tools Nodejs tools for cjdns. Highlights: peerStats show current peer status cjdnslog display cjdroute log cjdns-traceroute trace route to cjdns IP sessionStats show current crypto sessions %package -n python2-cjdns %{?python_provide:%python_provide python2-cjdns} # Remove before F30 Provides: %{name}-python = %{version}-%{release} Obsoletes: %{name}-python < %{version}-%{release} Summary: Python tools for cjdns %if 0%{?fedora} >= 18 BuildRequires: python2-rpm-macros %else BuildRequires: python-rpm-macros %endif Requires: python2, %{name} = %{version}-%{release} BuildArch: noarch %description -n python2-cjdns Python tools for cjdns. %package graph Summary: Python peer graph tools for cjdns Requires: python2-%{name} = %{version}-%{release} %if 0%{?rhel} == 6 || 0%{?rhel} == 7 Requires: python-networkx Requires: python2-matplotlib %else Requires: python2-networkx %endif BuildArch: noarch %description graph Python peer graph tools for cjdns. %prep %setup -qn cjdns-%{name}-v%{version} %patch0 -b .selinux %if 0%{?rhel} == 6 %patch1 -b .el6 %endif %patch2 -b .nprocs %patch4 -b .genconf %patch5 -b .sbin cp %{SOURCE2} contrib/systemd %if %{use_marked} tar xvfz %{SOURCE3} %endif %if 0%{use_embedded} # disable CPU opt %else # use system nacl library if provided. if test -x %{nacl_lib}; then %if 0%{use_libsodium} %patch11 -b .sodium %else %patch6 -b .dyn %endif rm -rf node_build/dependencies/cnacl # use static library if system nacl doesn't provide dynamic elif test -d %{_includedir}/nacl && test -r %{_libdir}/libnacl.a; then cd node_build/dependencies rm -rf cnacl mkdir -p cnacl/jsbuild ln -s %{_libdir}/libnacl.a cnacl/jsbuild ln -s %{_includedir}/nacl cnacl/jsbuild/include cd - fi %patch12 -b .sign %endif %if !0%{?rhel} || 0%{?rhel} > 6 %patch8 -b .warnings %endif %patch9 -b .man %patch10 -b .tools #patch13 -b .ppc64 #patch14 -b .entropy #patch15 -b .benc %patch16 -b .python3 %if 0%{use_libuv} %patch18 -p1 -b .libuv mkdir dependencies cp node_build/dependencies/libuv/include/tree.h dependencies/uv_tree.h rm -rf node_build/dependencies/libuv %endif %patch19 -p1 -b .fuzz %patch20 -p1 -b .sysctl cp %{SOURCE1} README_Fedora.md # Remove #!env from python scripts chmod a+x contrib/python/cjdnsadmin/cli.py find contrib/python/cjdnsadmin ! -executable -name "*.py" | xargs sed -e '\,^#!/usr/bin/env, d' -i find contrib/python -type f | xargs sed -e '1 s,^#!/usr/bin/env ,#!/usr/bin/,' -i sed -e '$ s,^python ,/usr/bin/python2 ,' -i contrib/python/cjdnsa # Remove #!env from nodejs scripts find tools -type f | xargs grep -l '^#!\/usr\/bin\/env ' | xargs sed -e '1 s,^#!/usr/bin/env ,#!/usr/bin/,' -i # Fix deprecated Buffer ctor except on EL6 %if 0%{?rhel} != 6 sed -e '1,$ s/new Buffer/Buffer.from/' -i \ tools/lib/publicToIp6.js tools/lib/cjdnsadmin/cjdnsadmin.js %endif # Remove unpackaged code with undeclared licenses %if %{with_admin} rm -rf contrib/nodejs # GPLv3 and ASL 2.0 %endif rm -rf contrib/http # GPLv2 and MIT cat >cjdns-up.sh <<'EOF' #!/bin/sh cjdev="$(cjdns-online -i)" || exit 1 for s in %{_sysconfdir}/cjdns/up.d/*.sh; do if test -x "$s"; then "$s" up $cjdev fi done EOF chmod a+x cjdns-up.sh %if %{generic_build} %ifarch s390x sed -i -e 's/-march=native/-mtune=native/' node_build/make.js %else sed -i -e 's/-march=native/-mtune=generic/' node_build/make.js %endif rm node_build/dependencies/cnacl/node_build/plans/*_AVX_plan.json # Leaving SSE2 code in since x86 is secondary arch and pretty much everyone # is going to have SSE2, except things like XO-1 which needs custom build. #rm node_build/dependencies/cnacl/node_build/plans/x86_SSE2_plan.json %endif %if !%{use_marked} cp -r /usr/lib/node_modules/ronn node_modules %patch21 -p1 -b .puts ln -s node_modules/ronn/bin/ronn.js ronn %endif # FIXME: grep Version_CURRENT_PROTOCOL util/version/Version.h and # check that it matches major %%{version} %build cd contrib/selinux ln -s /usr/share/selinux/devel/Makefile . make cd - # nodejs based build system %if !%{with seccomp} export Seccomp_NO=1 %endif %if %{with subnode} export SUBNODE=1 %endif NO_TEST=1 CJDNS_RELEASE_VERSION="%{name}-%{version}-%{release}" ./do # FIXME: use system libuv on compatible systems # bundled libuv is 0.11.19 with changes: # https://github.com/cjdelisle/cjdns/commits/master/node_build/dependencies/libuv %check build_linux/test_testcjdroute_c all >test.out %install %if 0%{?rhel} == 5 rm -rf %{buildroot} # needed on RHEL5 %endif # the main switch process mkdir -p %{buildroot}%{_sbindir} install -p cjdroute %{buildroot}%{_sbindir} # init support %if %{use_upstart} mkdir -p %{buildroot}%{_sysconfdir}/init install -pm 644 contrib/upstart/cjdns.conf %{buildroot}%{_sysconfdir}/init %endif %if %{use_systemd} mkdir -p %{buildroot}%{_unitdir} install -pm 644 contrib/systemd/cjdns*.service %{buildroot}%{_unitdir} %endif mkdir -p %{buildroot}%{_sysconfdir}/cjdns/up.d # chroot mkdir -p %{buildroot}/var/empty/cjdns # install selinux modules mkdir -p %{buildroot}%{_datadir}/selinux/targeted install -pm 644 contrib/selinux/cjdns.pp %{buildroot}%{_datadir}/selinux/targeted ln -f contrib/selinux/cjdns.{te,fc} . # for doc dir # install c and nodejs tools mkdir -p %{buildroot}%{_libexecdir}/cjdns/{node_build,contrib} install -p publictoip6 privatetopublic mkpasswd makekeys randombytes sybilsim \ %{buildroot}%{_libexecdir}/cjdns rm -f node_modules/nthen/.npmignore cp -pr tools node_modules %{buildroot}%{_libexecdir}/cjdns %if %{with_admin} rm -f contrib/nodejs/admin/.gitignore cp -pr contrib/nodejs/admin %{buildroot}%{_libexecdir}/cjdns %endif cp -p cjdns-up.sh %{buildroot}%{_libexecdir}/cjdns/cjdns-up # symlinks for selected nodejs tools mkdir -p %{buildroot}%{_bindir} for t in peerStats sessionStats cjdnslog search dumpLinks dumptable \ dumpRumorMill pathfinderTree pingAll; do ln -sf %{_libexecdir}/cjdns/tools/$t %{buildroot}%{_bindir} done for t in traceroute; do ln -sf %{_libexecdir}/cjdns/tools/$t %{buildroot}%{_bindir}/cjdns-$t done # symlinks for selected C tools that don't conflict with other packages for t in publictoip6 randombytes makekeys; do ln -sf %{_libexecdir}/cjdns/$t %{buildroot}%{_bindir} done # cjdns-online script install -pm 755 contrib/systemd/cjdns-online.sh \ %{buildroot}%{_bindir}/cjdns-online # man pages mkdir -p %{buildroot}%{_mandir}/man1 mkdir -p %{buildroot}%{_mandir}/man5 mkdir -p %{buildroot}%{_mandir}/man8 install -pm 644 doc/man/cjdroute.conf.5 %{buildroot}%{_mandir}/man5 cd contrib/doc for m in *.md; do case ${m%.md} in traceroute) M="1" %{makeman} $m >%{buildroot}%{_mandir}/man$M/cjdns-${m%.md}.$M continue ;; privatetopublic|sybilsim) M="8" ;; *) M="1" ;; esac %{makeman} $m >%{buildroot}%{_mandir}/man$M/${m%.md}.$M done cd - %if %{with_python} # install python tools that pull in networkx for graphing cp -pr contrib/python %{buildroot}%{_libexecdir}/cjdns # These files are installed via doc and license rm %{buildroot}%{_libexecdir}/cjdns/python/README.md rm %{buildroot}%{_libexecdir}/cjdns/python/cjdns-dynamic.conf rm %{buildroot}%{_libexecdir}/cjdns/python/cjdnsadmin/bencode.py.LICENSE.txt # Move cjdnsadmin to site-packages mkdir -p %{buildroot}%{python2_sitelib} mv %{buildroot}%{_libexecdir}/cjdns/python/cjdnsadmin %{buildroot}%{python2_sitelib} # symlink python tools w/o conflict with nodejs tools or needing networkx for t in pingAll.py trashroutes \ getLinks ip6topk pktoip6 cjdnsa searches findnodes; do ln -sf %{_libexecdir}/cjdns/python/$t %{buildroot}%{_bindir} done # symlink python tools that pull in networkx for graphing for t in drawgraph dumpgraph graphStats; do ln -sf %{_libexecdir}/cjdns/python/$t %{buildroot}%{_bindir} done %endif %files %{!?_licensedir:%global license %%doc} %license LICENSE %doc README.md README_*.md HACKING.md %attr(0100,root,root) /var/empty/cjdns %attr(0755,root,root) %{_sbindir}/cjdroute %ghost %attr(0600,root,root) %config(missingok,noreplace) %{_sysconfdir}/cjdroute.conf %dir %{_libexecdir}/cjdns %if %{use_upstart} %{_sysconfdir}/init/* %endif %if %{use_systemd} %{_unitdir}/* %endif %dir %{_sysconfdir}/cjdns/up.d %{_libexecdir}/cjdns/cjdns-up %{_libexecdir}/cjdns/randombytes %{_libexecdir}/cjdns/publictoip6 %{_libexecdir}/cjdns/privatetopublic %{_libexecdir}/cjdns/sybilsim %{_libexecdir}/cjdns/makekeys %{_libexecdir}/cjdns/mkpasswd %{_bindir}/randombytes %{_bindir}/publictoip6 %{_bindir}/makekeys %{_bindir}/cjdns-online %{_mandir}/man5/* %{_mandir}/man8/* %{_mandir}/man1/cjdns-online.1.gz %{_mandir}/man1/cjdroute.1.gz %{_mandir}/man1/makekeys.1.gz %{_mandir}/man1/publictoip6.1.gz %{_mandir}/man1/randombytes.1.gz %pre getent group cjdns > /dev/null || groupadd -r cjdns getent passwd cjdns > /dev/null || /usr/sbin/useradd -g cjdns \ -c "End to end encrypted IPv6 mesh" \ -r -d %{_libexecdir}/cjdns -s /sbin/nologin cjdns exit 0 %if %{use_systemd} %post %systemd_post cjdns.service %postun %systemd_postun_with_restart cjdns.service %preun %systemd_preun cjdns.service %endif %if %{use_upstart} %preun if [ "$1" -eq 0 ]; then /sbin/initctl stop cjdns fi %postun if [ "$1" -ge 1 ]; then /sbin/initctl restart cjdns fi %endif %files selinux %doc cjdns.te cjdns.fc %{_datadir}/selinux/targeted/* %post selinux /usr/sbin/semodule -s targeted -i %{_datadir}/selinux/targeted/cjdns.pp \ &>/dev/null || : %{__restorecon} %{_sbindir}/cjdroute %postun selinux if [ $1 -eq 0 ] ; then /usr/sbin/semodule -s targeted -r cjdns &> /dev/null || : fi %files tools %if %{with_admin} %{_libexecdir}/cjdns/admin %endif %{_libexecdir}/cjdns/tools %{_libexecdir}/cjdns/node_build %{_libexecdir}/cjdns/node_modules %{_bindir}/peerStats %{_bindir}/sessionStats %{_bindir}/cjdnslog %{_bindir}/dumpRumorMill %{_bindir}/dumpLinks %{_bindir}/pathfinderTree %{_bindir}/dumptable %{_bindir}/pingAll %{_bindir}/search %{_bindir}/cjdns-traceroute %{_mandir}/man1/cjdns-traceroute.1.gz %{_mandir}/man1/sessionStats.1.gz %{_mandir}/man1/peerStats.1.gz %{_mandir}/man1/cjdnslog.1.gz %files -n python2-cjdns %doc contrib/python/README.md contrib/python/cjdns-dynamic.conf %license contrib/python/cjdnsadmin/bencode.py.LICENSE.txt %{python2_sitelib}/cjdnsadmin %dir %{_libexecdir}/cjdns/python %{_libexecdir}/cjdns/python/cexec %{_libexecdir}/cjdns/python/cjdnsadminmaker.py* %{_libexecdir}/cjdns/python/cjdnslog %{_libexecdir}/cjdns/python/dumptable %{_libexecdir}/cjdns/python/dynamicEndpoints.py* %{_libexecdir}/cjdns/python/peerStats %{_libexecdir}/cjdns/python/sessionStats %{_libexecdir}/cjdns/python/pingAll.py* %{_libexecdir}/cjdns/python/trashroutes %{_libexecdir}/cjdns/python/getLinks %{_libexecdir}/cjdns/python/ip6topk %{_libexecdir}/cjdns/python/pktoip6 %{_libexecdir}/cjdns/python/cjdnsa %{_libexecdir}/cjdns/python/searches %{_libexecdir}/cjdns/python/findnodes %{_bindir}/pingAll.py %{_bindir}/trashroutes %{_bindir}/getLinks %{_bindir}/ip6topk %{_bindir}/pktoip6 %{_bindir}/cjdnsa %{_bindir}/searches %{_bindir}/findnodes %files graph %{_libexecdir}/cjdns/python/drawgraph %{_libexecdir}/cjdns/python/dumpgraph %{_libexecdir}/cjdns/python/graphStats %{_bindir}/drawgraph %{_bindir}/dumpgraph %{_bindir}/graphStats %changelog * Sat Aug 03 2019 Stuart Gathman - 20.3-5 - Remove deprecated sysctl() call in getUUID (read from /proc/.../random/uuid) - Patch a local copy of ronn to stop calling util.puts/util.debug * Wed Jul 24 2019 Fedora Release Engineering - 20.3-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Thu May 09 2019 Stuart Gathman - 20.3-3 - Move running test suite to check * Wed May 08 2019 Stuart Gathman - 20.3-2 - Increase timeout for fuzz tests to allow slower arches to succeed * Wed May 08 2019 Stuart Gathman - 20.3-1 - New upstream version 20.3 * Fri May 03 2019 Stuart Gathman - 20.2-7 - Option to use system libuv - Fix scope of Pipe_PATH String_CONST in config. * Thu Jan 31 2019 Fedora Release Engineering - 20.2-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Thu Nov 8 2018 Stuart Gathman - 20.2-5 - Install cjdnsadmin python module in site-packages - Work around missing python2-networkx Provides in python-networkx bz#1647987 - Fix deprecated Buffer ctor in nodejs tools except on el6 * Wed Jul 18 2018 Stuart Gathman - 20.2-4 - cjdns-20.2 bundles libuv-0.11.19 - disable CPU specific optimization * Thu Jul 12 2018 Fedora Release Engineering - 20.2-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Thu May 31 2018 Stuart Gathman - 20.2-2 - Add cnacl s390x support BZ#1584480 * Tue May 22 2018 Stuart Gathman - 20.2-1 - New upstream release BZ#1464671 * Wed Mar 14 2018 Stuart Gathman - 20.1-4 - Explicit python version in Requires - Fix possible unterminated interface name in ifreq * Tue Mar 13 2018 Iryna Shcherbina - 20.1-3 - Update Python 2 dependency declarations to new packaging standards (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3) * Tue Mar 6 2018 Stuart Gathman - 20.1-2 - selinux: Allow map access to cjdns_exec_t - disable subnode by default * Wed Feb 21 2018 Stuart Gathman - 20.1-1 - New upstream release * Fri Feb 09 2018 Igor Gnatenko - 19.1-10 - Escape macros in %%changelog * Wed Feb 07 2018 Fedora Release Engineering - 19.1-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Mon Oct 02 2017 Remi Collet - 19.1-8 - rebuild for libsodium * Sat Aug 19 2017 Zbigniew Jędrzejewski-Szmek - 19.1-7 - Python 2 binary package renamed to python2-cjdns See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3 * Wed Aug 02 2017 Fedora Release Engineering - 19.1-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Wed Jul 26 2017 Fedora Release Engineering - 19.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Wed May 24 2017 Stuart D. Gathman 19.1-4 - Add calls to sodium_init() - Include mkpasswd (but not in /usr/bin) * Fri Feb 24 2017 Stuart D. Gathman 19.1-3 - Test and fix --with=subnode * Fri Feb 24 2017 Stuart D. Gathman 19.1-2 - Adjust for moving in6_ifreq to linux/ipv6.h in kernel-headers-4.11 * Fri Feb 24 2017 Stuart D. Gathman 19.1-1 - New upstream release * Sat Feb 18 2017 Stuart D. Gathman 18-7 - Fix errors and document nits found by gcc7 * Fri Feb 10 2017 Fedora Release Engineering - 18-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Sat Jan 7 2017 Stuart D. Gathman 18-5 - Run scripts in %%{sysconfdir}/cjdns/up.d when cjdns comes up. * Sun Nov 6 2016 Stuart D. Gathman 18-4 - update cjdns-online man page - Support ppc64, ppc64le, s390x * Fri Oct 14 2016 Stuart D. Gathman 18-3 - libstdc++ not needed with libsodium * Fri Oct 14 2016 Stuart D. Gathman 18-2 - Remove Sign.c which uses a private API and isn't needed until supernodes. - Use libsodium by default: seems best performance of dynamic libraries * Wed Oct 12 2016 Stuart D. Gathman 18-1 - Update to 18 upstream release * Mon Aug 15 2016 Stuart D. Gathman 17.4-7 - Move modprobe to cjdns-loadmodules.service * Wed Aug 10 2016 Stuart D. Gathman 17.4-6 - Fix logic for %%bcond_without seccomp * Wed Aug 10 2016 Stuart D. Gathman 17.4-5 - cjdns.service: add CapabilityBoundingSet * Fri Jun 24 2016 Stuart D. Gathman 17.4-4 - cjdns-selinux: allow cjdroute to manipulate route table * Thu Jun 23 2016 Stuart D. Gathman 17.4-3 - Remove cjdns-resume.service patch, incorporated upstream - Add --interface option to cjdns-online.sh * Thu Jun 23 2016 Stuart D. Gathman 17.4-2 - Move tool manpages to tool subpackage. * Thu Jun 23 2016 Stuart D. Gathman 17.4-1 - Update to 17.4 upstream release - Remove cap3 patch, as it is incorporated upstream - Remove Constant.js patch, as it is incorporated upstream * Tue May 3 2016 Stuart D. Gathman 17.3-13 - man page for cjdnslog - Fix running on Fedora as well as openVZ. :-P - Make cjdns exclusive to nodejs_arches. Rafael Fonseca * Mon Apr 18 2016 Stuart D. Gathman 17.3-12 - Run modprobe only if /dev/tun not present - fixes running on openVZ - Select nacl/libsodium with a macro - Switch back to nacl for platforms that support it - man page for peerStats * Tue Apr 5 2016 Stuart D. Gathman 17.3-11 - Patch some bugs in traceroute and symlink to /usr/bin/cjdns-traceroute - man page for cjdns-traceroute, sessionStats - switch to libsodium instead of nacl * Thu Mar 10 2016 Stuart D. Gathman 17.3-10 - Mark nodejs and selinux noarch - Remove _isa from noarch subpackages. * Thu Mar 10 2016 Stuart D. Gathman 17.3-9 - Strip /8 from IPs printed by cjdns-online - Add GPL3+ to cjdns-online - ghost /etc/cjdroute.conf - Include _isa formula in subpackage requires. * Tue Mar 8 2016 Stuart D. Gathman 17.3-8 - Add release to main package dependencies - More man pages - Restore missing cjdns-resume.service - Add empty config to be owned by package * Tue Mar 1 2016 Stuart D. Gathman 17.3-7 - Add explicit systemd dependency - Add selinux-policy-targeted dependency - Add version to main package dependencies - Remove use of #!/usr/bin/env in nodejs tools - Change all top level define to global - Remove workaround for missing -fPIC on libnacl for X86_64 on f22. * Mon Feb 29 2016 Stuart D. Gathman 17.3-6 - Man pages - Move /usr/lib/cjdns to /usr/libexec/cjdns - Move all C tools to main package, mark (nodejs) tools noarch * Wed Feb 24 2016 Stuart D. Gathman 17.3-5 - Add use_embedded option - Reorganize with use_systemd, use_upstart - Set __restorecon only if not defined - Use install instead of cp to set file modes - Move randombytes,publictoip6 and /usr/lib/cjdns to main package - Fix bad #! lines in contrib/python - Patch util/Security.c to call setgroups(0,...) before setuid(). * Fri Feb 12 2016 Stuart D. Gathman 17.3-4 - Add Fedora README - No libnacl on EL7 or EPEL7 * Tue Feb 2 2016 Stuart D. Gathman 17.3-3 - Add node_modules to tools - Add #pragmas to ignore bogus warnings from gcc6 - Fix shift of signed int * Mon Feb 1 2016 Stuart D. Gathman 17.3-2 - Fix extra line in updated sbin patch * Mon Feb 1 2016 Stuart D. Gathman 17.3-1 - New upstream release - Add cjdns-resume.service to restart cjdns on resume from sleep * Tue Jan 19 2016 Stuart D. Gathman 17.2-1 - New upstream release * Sat Nov 07 2015 Stuart D. Gathman 17.1-3 - remove defattr - TODO: generate default config at install time, not first start * Wed Nov 04 2015 Stuart D. Gathman 17.1-2 - use dynamic nacl library backported from rawhide * Tue Nov 03 2015 Stuart D. Gathman 17.1-1 - update to new protocol version * Tue Oct 27 2015 Stuart D. Gathman 16.3-2 - move graphing tools to graph subpackage: networkx has a lot of dependencies. - use embedded nacl only for i686 (which compiles it with -fPIC) * Fri Oct 16 2015 Stuart D. Gathman 16.3-1 - Allow hostname lookup in selinux policy - python tools subpackage * Sun Oct 4 2015 Stuart D. Gathman 16.0-6 - restorecon after selinux install to initialize cjdroute context - remove module_request (to load tun driver) from selinux policy - make init scripts load tun driver * Sun Sep 27 2015 Stuart D. Gathman 16.0-5 - Restart cjdroute on update, stop on uninstall - symlink selected tools to bin - use /var/empty/cjdns for chroot - patch genconf to change chroot and setuser * Wed Sep 23 2015 Stuart D. Gathman 16.0-4 - Remove doc subpackage - only a meg of docs, and protocol is experimental. - Fix for RLIMIT_NPROC - setuid bug. - Add setgid to Security.c - add contrib/nodejs so tools work * Wed Sep 23 2015 Stuart D. Gathman 16.0-3 - Add selinux, doc and tools subpackages - Support EL6 * Mon Sep 21 2015 Stuart D. Gathman 16.0-2 - nodejs not a runtime dependency of main package - move binaries to /usr/bin (good idea?) * Mon Sep 21 2015 Stuart D. Gathman 16.0-1 - Initial RPM