(clumens)
Don't use the rpmdb to figure out upgrade target arch (#748119). (clumens)
Remove obsolete error handling left over from the old storage code. (dlehman)
Update to the FC16_VolGroupData so reserving space works. (dlehman)
Remove unused import of gzip from task_gui.py (dlehman)
Cap new /boot/efi partitions at 200MB. (#748274) (dlehman)
Fix root device specification in zipl.conf. (#740576) (dlehman)
Add --boot-drive option to kickstart bootloader command. (dlehman)
Include disklabel type in grub2 device names. (dlehman)
use 800x600 as minimal mainWindow size (vpodzime) (mgracik)
Use an atexit handler for shutting down and ejecting media (#750809).
(clumens)
Fix a dumb error when canceling previous migration actions (#744034).
(clumens)
Document iscsi and multipath implementations. (akozumpl)
Don't load forcefully load pcspkr. The kernel doesn't (#750830). (clumens)
Gray out "Configure Network" button in live installations (#749929)
(rvykydal)
Support prefix length in kickstart network --ipv6 option. (rvykydal)
Support prefix length in ipv6= cmdline option (#679108) (rvykydal)
Remove snarffont, which is no longer needed. (clumens)
Change what the third column of lang-table means. (clumens)
And stop attempting to load our own fonts, since we no longer ship them.
(clumens)
Remove our own screen fonts (#742613, #743429). (clumens)
Don't use GPT disklabels on Lenovo BIOS systems. (#749325) (dlehman)
Fix typo in call to opt.isdigit (#743787) (pjones)
Don't allow disks containing the live media as boot disk. (#748587) (dlehman)
Honor fsprofile argument even for existing devices. (#747417) (dlehman)
Regenerate tasklist when a repo is removed. (akozumpl)
Do a better job of remembering if 'review and modify partitioning' was
checked. (akozumpl)
Be more convincing in eradicating errant temp vg paths. (#722952) (dlehman)
Resize: Update format size if aligning partition shrinks it. (#689179)
(dlehman)
Copy all of live filesystem to target (#746844) (bcl)
Fix autopart shrink of existing system. (#746605) (dlehman)
cryptsetup returns positive nonzero when activating by different than the
first keyslot (msivak)
do more logging in findExistingRootDevices() (akozumpl)
Add 'nogpt' cmdline arg to disable creation of gpt disklabels. (dlehman)
Show cleardisks gui always to allow selecting a boot disk. (#744088)
(dlehman)
mpath: flush more eagerly in filter_gui. (akozumpl)
debugging: log boot arguments. (akozumpl)
Copy all of live filesystem to target (#746844) (bcl)
Fix autopart shrink of existing system. (#746605) (dlehman)
cryptsetup returns positive nonzero when activating by different than the
first keyslot (msivak)
Add 'nogpt' cmdline arg to disable creation of gpt disklabels. (#735733)
(dlehman)
Show cleardisks gui always to allow selecting a boot disk. (#744088)
(dlehman)
(pjones)
analog: properly log user.info where NetworkManager (also) communicates.
(akozumpl)
analog: bump the version to rsyslog 5 (akozumpl)
partitioning.py: reference to list of free regions is shadowed by a double.
(akozumpl)
Handle strange lang boot argument values. (akozumpl)
LANG_DEFAULT lives in lang.c. (akozumpl)
Include docs/transifex.txt in release dist. (dcantrell)
fcoe: modprobe the VLAN layer module. (akozumpl)
Remove some raid error checking pykickstart can do for us. (clumens)
Set default BOOTPROTO=dhcp for network service (minimal installs) (#741199)
(rvykydal)
remove argument ROOT_PATH from getDefaultKeyboard() calls (removed from
method with 3e8d08cac6aa89f001c5b32dba251a62a45ed7f4) (vpodzime)
Default to an active network device after reboot on Fedora (ONBOOT) (#498207)
(rvykydal)
Fix: Allow EFI slot_ids in hexdecimal (#742141). (fabian.deutsch)
Move the fedora logo to the left. (akozumpl)
fcoe: fix detecting FCoE NIC (mcb30)
Do not show loop devices in the filtering UI. (akozumpl)
dispatcher: do not request "group-selection" with "tasksel". (akozumpl)
upgrade: do not insist on running the "bootloader" step. (akozumpl)
Fix sigsegv in setKickstartNetwork() (strdup() from a NULL). (akozumpl)
dracut args: "rhgb quiet" should come last. (akozumpl)
Add nfsiso: handling to parseNfsHostPathOpts (bcl)
Only check relevant devices for dirty filesystems. (#741206) (dlehman)
Make sure storage is reset just before partitioning, always. (dlehman)
Move selection of default boot drive into bootloader. (dlehman)
Show error dialog instead of traceback on fstab type mismatch. (#649171)
(dlehman)
Try a test mount and keep fstab mismatches if it succeeds. (#649171)
(dlehman)
Check the return value of get_file_list (#741466) (bcl)
imount.c: include fcntl.h before ext2fs/ext2fs.h. (akozumpl)
Write the grub.conf after setting up the new EFI bootloader (#741994)) (bcl)
botoloader: write 'ip=eth0:dhcp,auto6' instead of 'ip=eth0:dhcp
ip=eth0:auto6' (akozumpl)
gitingore: ignore po/*.po.new files. (akozumpl)
Put bios boot partitions on all gpt disk on bios systems. (#738964) (dlehman)
Change default bootloader timeout from 20sec to 5sec. (#727831) (dlehman)
Bootloader stage1_drive is more than a suggestion. (#738964) (dlehman)
Mark the live device's parent devices protected. (#738964) (dlehman)
it is anaconda-shell (akozumpl)
Improve the clarity of the missing bios boot partition error. (#731549)
(dlehman)
Remove tmp.mount (systemd handles this for us now) (wwoods)
Move dependency info into the unit files (wwoods)
move anaconda-shell.service to the correct filename (wwoods)
make anaconda-shell.service a template, put it on tty2 & hvc1 (wwoods)
Return after writing log message, not before. (rvykydal)
Do not reactivate network device needlessly on s390 (#739846) (rvykydal)
Start NM in loader on s390 until we have systemd init here too (#733680)
(rvykydal)
Revert "Set debug_package to %{nil} so we don't strip our binaries."
(akozumpl)
Fix createUser and createGroup to work with kickstart defaults (#739428)
(bcl)
Update test for createUser and createGroup (#739428) (bcl)
fcoe: handle Broadcom fcoe devices correctly. (akozumpl)
fcoe: the control path in sysfs is now /sys/module/libfcoe (akozumpl)
fcoe: load bnx2fc if relevant. (akozumpl)
Fix post-commit lookup of extended partitions. (#737532) (dlehman)
Don't reboot when closing the live installer via the window decoration.
(clumens)
Use the luks format's mapName when creating temp LUKSDevice. (#722952)
(dlehman)
Reset device attr after using temp dev. (#722952) (dlehman)
Make sure there are no tempvg paths even if formatting. (#737916) (dlehman)
Install grub2 when upgrading on bios x86. (#735730) (dlehman)
Default to installing a new bootloader on upgrade. (dlehman)
Add a Reboot button to the congrats screen on live (#705189). (clumens)
Add support for reserving space in lvm vgs via kickstart. (dlehman)
iutil: make getArch() return ppc64 on ppc64 (#736721) (wwoods)
iutil: add 'bits' arg to isPPC (like isX86) (wwoods)
nfsiso: handle mismatching .iso architecture gracefully. (akozumpl)
systemd: anaconda.target wants rsyslog.service (akozumpl)
Improve checking if new biosboot partition is needed. (akozumpl)
mpath: create /etc/multipath/bindings if we are using friendly names.
(akozumpl)
isolate localeInfo and expandLangs() from langauges.py into a separate
module. (akozumpl)
Make sure we teardown root candidates in all cases. (#693095) (dlehman)
Update parted partition by sector, not name, after create. (#733449)
(dlehman)
Determine existing md arrays' metadata version. (#731266) (dlehman)
Don't check mountable before obtaining actual/existing fs size. (#733808)
(dlehman)
Fix traceback when installing over a system with broken rpm db. (akozumpl)
kickstart: use 'bootloader --timeout' even if it is zero. (akozumpl)
Fix some things using old bootloader/platform stuff. (dlehman)
Fix traceback when validating unallocated partition requests. (#733670)
(dlehman)
Require BIOS boot partition for GPT bootdisk on BIOS systems. (dlehman)
Prevent grub2 from trying to access floppy drives. (dlehman)
Limit grub stage2 md members' device type and metadata version. (dlehman)
Remove unnecessary ROOT_PATH constant passing. (akozumpl)
Moving anaconda.rootPath to constants.ROOT_PATH. (akozumpl)
Remove deprecated --rootPath and --test. (akozumpl)
Tidy warnings.showwarning into anaconda_log.py. (akozumpl)
cosmetic: remove trailing whitespace in timezone_test.py (akozumpl)
ut: cleanup after firewall_test.py (akozumpl)
ut: move tests/fw_test.py to tests/pyanaconda_test/firewall_test.py
(akozumpl)
Close out the yum history before running %post scripts (#730857). (clumens)
Remove unused attribute 'bootable' from DeviceFormat classes. (dlehman)
Allow btrfs stage2 with grub2. (#732594) (dlehman)
Clean up return values of GRUB2._gpt_disk_has_bios_boot. (dlehman)
Force grub2 install to partition's boot block. (#727679) (dlehman)
Don't crash because we don't have support for linear md. (#646157) (dlehman)
Clean up obsolete extended partitions if partitioning fails. (#672010)
(dlehman)
Convert a None from libiscsi.discover() to an empty list. (akozumpl)
Honor kickstart 'autopart --nolvm' option (jlaska)
Allow answering the uninitialized disk question more than once. (akozumpl)
edd: do not traceback with cciss devices. (akozumpl)
edd: do not traceback when can not find the respective pci device. (akozumpl)
Use unsigned long long type in doTotalMemory() (dcantrell)
Do not traceback on mpath errors caused by faulty hardware. (akozumpl)
Fix a bunch of stupid little errors pylint caught. (clumens)
There's no more booty module, so don't bother checking it. (clumens)
Ignore false positives in kickstart.py. (clumens)
Ignore reimport warnings from pylint. (clumens)
Handle any amount of whitespace between keyword and rhbz reference.
(dcantrell)
dispath -> dispatch in kickstart.py. (clumens)
(clumens)
request_step -> request_steps in anaconda. (clumens)
Add a writeKS method for encrypted partitions. (clumens)
Don't associate LVs' formats with their parent VG. (dlehman)
Use os-prober to generate GRUB2 dual-boot menu entries. (dlehman)
Fix GRUB2 password handling and GRUB1 kickstart password handling. (dlehman)
changes needed to have per-connection ifcfg files for wifi connections
(vpodzime)
do not care about wifi connections in kickstart (already active from stage1)
(vpodzime)
do not take anaconda's netdevices into account while searching for APs
(vpodzime)
remove key-files writing in loader (no more needed, NM does it itself)
(vpodzime)
do not write default ifcfg files for wireless devices (vpodzime)
Remove the 11.x history from anaconda.spec. (clumens)
Use protected for pvs of incomplete vgs and get rid of immutable. (dlehman)
Use mdadm's default metadata format instead of hardcoding 1.1. (dlehman)
Only show warning about no biosboot on gpt on gpt. (dlehman)
Plumb the cleanupOnly= option through to Storage.reset(). (clumens)
i18n: Maintain the translated repo name upon modifying. (akozumpl)
Log errors during dependency resolution. (clumens)
Fix a bug where language names aren't translated to native. (clumens)
Remove things from utils/ that lorax obsoletes. (clumens)
Remove things from scripts/ that lorax obsoletes. (clumens)
Handle systems with more than 2147483647 kB of memory (#704593). (dcantrell)
Remove support for the ext4migrate option (#712195). (dcantrell)
edd: refactor and enhance the edd module. (akozumpl)
unit tests: provide 'glob.glob' and 'os.listdir' in the DiskIO class.
(akozumpl)
Pulsing progress bar instead of the static popup during device discovery.
(akozumpl)
yum: handle PackageSackErrors separately in AnacondaYum._run. (akozumpl)
We need a later version of pykickstart with the wpakey parameter. (clumens)
Remove KillMode= from systemd control files. (clumens)
Add a property to Platform for accessing boot stage1 constraints. (dlehman)
Simplify lvm growing by using units of pesize instead of MB. (dlehman)
Move platform-specific boot-related data into Platform. (dlehman)
Make /home autoreq grow a bit faster in relation to root. (dlehman)
Update upd-bootiso for F16 (bcl)
Allow a .iso file to be specified instead of a directory (#707846) (bcl)
Fix typo from 573ef017. (akozumpl)
Keep dracut settings in sets instead of many long strings. (akozumpl)
enable netmask setting for wireless connections (vpodzime)
enable dns settings of wireless connection (vpodzime)
enable gateway settings of wireless connection (vpodzime)
enable wpa in kickstart (vpodzime)
enable establishing wpa connection in "early networking" (vpodzime)
ut: remove trailing whitespace in language_test.py (akozumpl)
'part' command checks if the disk is partitionable. (akozumpl)
Correct and simplify handling of "bootable" partition requests. (dlehman)
Don't check the fstype for /boot req weight. (dlehman)
Freeze the lvm button when custom partitioning is selected. (dlehman)
Use the same code for growing lvs that we use for growing partitions.
(dlehman)
Fix check for whether new lv size will fit in vg's free space. (dlehman)
Sun disklabel hacks. (#697100) (dlehman)
Maximize extended partition even when logical reqs' sizes are capped.
(dlehman)
Don't magically adjust fstype when mountpoint is set to "/boot". (dlehman)
Handle partition allocation failures due to alignment adjustments. (dlehman)
Include protected attribute in StorageDevice.__str__. (dlehman)
Log results of protected device spec resolution. (dlehman)
Implement an option that lets anaconda name mpath devices by the wwid.
(akozumpl)
In kickstart, specify multipaths by their wwids. (akozumpl)
multipath: allow mpath<X> specfifications in kickstart. (akozumpl)
multipath: do not set any mpath aliases explicitly. (akozumpl)
Use global proxy setting if no repo proxy is set (#712926) (bcl)
Remove duplicate code. (rvykydal)
Fix typo (DispatcherError->DispatchError). (dlehman)
Allow autopart without lvm. (dlehman)
Fix a typo to make encrypted installs get farther. (clumens)
Fix the filter UI to sort capacity as numbers, not characters (#614504).
(clumens)
Fix up swap unmount logic (#708966) (bcl)
Use read-only locking for lvm commands in udev rules. (dlehman)
Check if LVs still fit when removing a PV from a VG. (#682276) (dlehman)
Don't get tripped by partial fstab option matches. (#699167) (dlehman)
RAID gui: fix how the "Number of spares" spin button is manipulated.
(akozumpl)
imount.c: first wait() for mount then close its stdin/stdout. (akozumpl)
Fix a couple of action obsoletes bugs. (dlehman)
Schedule an action when destroying the old format on an encrypted lv.
(dlehman)
Revert "Make sure new devices' formats have their device attr set." (dlehman)
Set formats' device attr when associating the format with a device. (dlehman)
cosmetic, iscsi: make the 'no credentials' string more general. (akozumpl)
Make sure new devices' formats have their device attr set. (dlehman)
Don't crash if is_valid_foo methods are called with None. (dlehman)
Unit tests cleanups (akozumpl)
Remove trailing whitespace in file tests/mock/mock.py. (akozumpl)
Remove erronious (vestigial?) call to Platform.isEfi (pjones)
Remove upgrade_swap_gui from POTFILES.in (akozumpl)
ut: if _isys is not available dispatch_test and indexed_dict_test are
failing. (akozumpl)
Cherry-pick from rhel5-branch, by Will Woods. (wwoods)
Pythonize some code from network.py for pleasure. (rvykydal)
Honor DEFROUTE=no when inferring system-wide GATEWAY (rvykydal)
Get rid of overrideDHCPHostname. (rvykydal)
HOSTNAME is not per-device/ifcfg setting. (rvykydal)
Do not set hostname in stage 1. (rvykydal)
Do not write out /etc/sysconfig/network in stage 1. (rvykydal)
ut: make pyanaconda_test/backed_test.py pass (akozumpl)
dispatch: break out step initialization into a separate method. (akozumpl)
dispatch: implement method of saving/restoring all steps scheduling.
(akozumpl)
upgrade: there are no "checkdeps" and "dependencies" steps. (akozumpl)
ut: make upgrade_test pass. (akozumpl)
cosmetic: dispatch.request_step is dispatch.request_steps. (akozumpl)
cosmetic: dispatch.skipStep is dispatch.skip_steps (akozumpl)
cosmetic: move the dir property in dispatch.py with other public methods.
(akozumpl)
dispatch: fix remaining places using the old dispatch interface. (akozumpl)
dispatch: remove "upgradeswapsuggestion" and "addswap" steps. (akozumpl)
dispatch: Fix rules for running the bootloader and instbootloader steps.
(akozumpl)
dispatch: Fix rules for running the partitioning step. (akozumpl)
dispatch: clean up step skipping manipulations in kickstart. (akozumpl)
dispatch: All skips are permanent now. (akozumpl)
Cleanup how an installer interface can declare steps it does not implement.
(akozumpl)
Throw away the dispatcher 'skipList' and give Step a state. (akozumpl)
dispatch: use IndexedDict objects instead of a list of tuples. (akozumpl)
IndexedDict class for storing the installer steps (akozumpl)
Add a shortcut for Configure Network (#705022) (mgracik)
vgreduce now activates some lvs, which I do not understand. (dlehman)
Audit storage log statements' log levels and clean up some things. (dlehman)
Convert Device, DeviceFormat __str__ to __repr__ and add __str__. (dlehman)
filled in hasFreeDiskSpace (#683632) (hamzy)
Add a python program to record memory usage during installation. (clumens)
Add a timestamp to every line in install.log/upgrade.log. (clumens)
storage: add SparseFileDevice (wwoods)
FileDevice._create: don't alloc memory equal to file size, close fd (wwoods)
Text mode upgrade should default to upgrade (#704588) (bcl)
Trim "/dev/" correctly in list-harddrives (#702430). (dcantrell)
Include missing parentheses in lvm/md device map names. (dlehman)
Make sure stage1 and stage2 devices are in device.map in case of md,lvm.
(dlehman)
Only do redundant mbr installation for mirrored stage2. (dlehman)
Allow growable md member requests but only for RAID0. (dlehman)
Let blkid/udev tell us which devices contain disklabels. (dlehman)
Move selection of new disklabel's type from DiskLabel to Platform. (dlehman)
Fix an omission from the integration of the new bootloader module. (dlehman)
Rework bootloader constraint checking routines. (dlehman)
Include a BIOS boot partition in X86 autopart on GPT. (dlehman)
Add format class for BIOS boot partition. (dlehman)
Update dracut kernel args (#702711) (bcl)
Add btrfs min size of 256 MB. (#702603) (dlehman)
Update the requirements for memory.. (dlehman)
fix resuce_test.py (akozumpl)
remove references to "zfcpconfig". (akozumpl)
Turn sshd setup, kicstart execution and the rescue mode into dispatch steps.
(akozumpl)
Make sure bootloader stage1 device stays current through partitioning.
(dlehman)
Remove unused Platform.validBootLoaderPartSize method. (dlehman)
Check that there is a stage1 req before validating it otherwise. (dlehman)
set_preferred_stage2_type -> set_preferred_stage1_type (dlehman)
Allow unsetting of stage1_device. (dlehman)
Add a "boot drive" concept to the bootloader since stage1 types vary.
(dlehman)
Consistently refer to stage1 and stage2 device as such. (dlehman)
Fix handling of missing boot device in doPartitioning. (dlehman)
Finish removing bootloadersetup step. (dlehman)
Add grub2 class, fix packages for some classes. (dlehman)
Don't change bootloader names for various configurations. (dlehman)
Add encrypted attribute to StorageDevice. (dlehman)
iscsi: disable the 'Login' button with no nodes selected. (akozumpl)
nuke: InstallControlWindow.busyCursor*() (akozumpl)
iutil: remove excess imports. (akozumpl)
Get rid of interface's entryWindow() and EntryWindow. (akozumpl)
Allow DeviceFormat.cacheMajorminor to fail without an exception. (akozumpl)
Don't check /boot fs when no bootloader is installed (#698312) (bcl)
yuminstall.py: self.pulseWindow is not used anywhere. (akozumpl)
Display a banner when (re)starting Anaconda. (akozumpl)
Most viewers of tty1 do not care about xrandr stderr output. (akozumpl)
restart-anaconda: no need to redownload the updates. (akozumpl)
Write 'edd' instead of 'ethX' for fcoe= dracut parameter. (dcantrell)
When checking for allowing an upgrade, trim off any "-Alpha" or "-Beta".
(clumens)
Make text for failed upgrade dialog clearer (#697193) (bcl)
Fix a grammar error in the upgrade message (#697244). (clumens)
If there are no RAID arrays, do not write an mdadm.conf (#696907). (clumens)
loader: always call klogctl to disable kernel logging in the console.
(akozumpl)
Set mainWindow size request to current res reported by xrandr (#694760)
(dcantrell)
Fix SIGSEGV for netwowrk --device=<MAC> which is not found (#697432)
(rvykydal)
Use correct interface to obtain HwAddress property (#693614) (rvykydal)
Revert "Don't write HWADDR into ifcfg files (#690589)" (rvykydal)
analog: turn off another harmful feature of rsyslogd. (akozumpl)
analog: cleanup whitespace in the file. (akozumpl)
Fix building with --disable-selinux (mark (clumens)
Don't include system virtual filesystems in /etc/fstab (#693926). (clumens)
Set ANACONDA=1 in the udev environment early in anaconda. (clumens)
findFirstIsoImage needs to return a filename, so fix it. (clumens)
Fix unmounting in anaconda-cleanup to deal with /mnt/sysimage as well.
(clumens)
Remove the second upgrade check from yuminstall.py. (clumens)
Cache the value of Format.majorminor(). (akozumpl)
And call anaconda-cleanup from restart-anaconda. (clumens)
Unmount everything in /mnt/install from anaconda-cleanup. (clumens)
Move most anaconda mount points to be under /mnt/install. (clumens)
Fix the initialization of LUKS device, we have to add the first keyslot (also
add key_file arguments for compatibility) (msivak)
Add "quiet" to the x86-64 and i386 boot arguments. (clumens)
Update restart-anaconda to work with systemd. (clumens)
Remove init.[ch]. (clumens)
Move debugging features into loader.c. (clumens)
We no longer need to get the PID of init from loader. (clumens)
Move serial console handling code out into its own file. (clumens)
Make reboot/halt/shutdown decisions in anaconda instead of loader. (clumens)
Remove all the custom shutdown/reboot/halt code in loader and init. (clumens)
Move syslog starting into loader. (clumens)
loader doesn't support arguments except from /proc/cmdline. (clumens)
Don't build our own init anymore. (clumens)
Remove the duplicate backtrace setup code in init.c. (clumens)
Remove from init.c/loader.c things that systemd does for us. (clumens)
Add the unit files necessary to have systemd start loader. (clumens)
crypttab should not be world-readable (#692254). (clumens)
Improve the translatability of strings with more than one format specifier.
(clumens)
Stop user if we have no /boot and / is an LV (dcantrell)
Prevent singlePV lv requests from being > the size of any pv (dcantrell)
Do not print out traceback when localedef is not present (msivak)
Update our storage/crypto interface to use new cryptsetup API (msivak)
Fix the logic surrounding use of the filterfunc for get_file_list (#691880).
(clumens)
mount needs to be told "nfs" or it assumes any argument is a device
(#678414). (clumens)
Fix rebooting after a kickstart error is detected. (akozumpl)
Add shell command to upd-bootiso (bcl)
Set debug_package to %{nil} so we don't strip our binaries. (pjones)
Return values, not strings (bcl)
Use proper store types for DataComboBoxes. (akozumpl)
Fixup rindex usage (#678086) (bcl)
Ensure new kernel is default in zipl.conf on upgrade installs (#683891)
(dcantrell)
shutdown: kill processes in the anaconda process group. (akozumpl)
After 17233a16, vncS is no longer a global. (akozumpl)
shutdown.c: pidof and killall5 are in /sbin on rawhide. (akozumpl)
Check size limits on pre-existing partitions (bcl)
gui.py: nuke createRepoWindow() (akozumpl)
gui.py: nuke titleBar*() (akozumpl)
Fix --mtu option to kickstart network command (#689081) (icomfort)
Implement a general version of InstallInterfaceBase.methodstrRepoWindow().
(akozumpl)
Update icons and add a new 256x256 version (#689014). (clumens)
Fix the filesystem migration dialog in text mode (#688314). (clumens)
Don't fatal_error if required mounts are already mounted (wwoods)
Don't fatal_error if remounting root read-write fails (wwoods)
Align lv sizes when adding to vg total space used. (dlehman)
Clean up display of free space in partitioning gui. (dlehman)
Fix a syntax error in my last upgrade-related commit. (clumens)
Remove some more xutils-related code. (clumens)
Prevent Platform from importing storage stuff until it's necessary. (clumens)
Restore stats from original mount on livecd (#683682) (bcl)
Properly filter out new mounts for livecd install (#683682) (bcl)
Mount livecd filesystems under /mnt (#683682) (bcl)
Fix order of opts and host when processing kickstart nfs lines. (clumens)
Rework the upgrade swap suggestion (#684603). (clumens)
Log running version number as soon as possible (bcl)
Collect LUKS passphrases to avoid making users enter them repeatedly.
(dlehman)
Don't include incomplete md arrays in the devicetree. (dlehman)
Detect live environment if no args passed to anaconda-cleanup. (dlehman)
(akozumpl)
- Make the "comps" translation domain dynamic. (akozumpl)
- Add a missing include to fix the build. (clumens)
- Remove the last of the xutils module. (clumens)
- Fix a missing exception variable. (akozumpl)
- Add cmdline options and f15 support to upd-bootiso (bcl)
- Use yum's new callback mode when available (pmatilai)
- Pressing enter on the keyboard screen should go to the next screen (#683448).
(clumens)
- Do not allow use of preexisting root filesystem. (#629311) (dlehman)
- Stop using --update=super-minor when starting md arrays. (dlehman)
- Fix kickstart handling of md spares. (#683605) (dlehman)
- Fix sensitivity of options in text network config UI (#681580) (jlaska)
- Consolidate ip address checking into functions. (rvykydal)
- Add support for ipv6 to gateway boot option (#677609) (rvykydal)
- Fix parsing of ipv6 --gateway in kickstart (#677609) (rvykydal)
- Remove 'Back' button on depsolving exception for ks installs (#673170)
(dcantrell)
- Shorten the anaconda repo names (#679434). (clumens)
- fix mnemonics in the 'Add Repository' dialog (akozumpl)
- Create the virtio-ports on time. (akozumpl)
- Do not pass --sshd to stage2. (akozumpl)
- Handle boot loader upgrades on s390 (#682783) (dcantrell)
- Don't assume BOOTIF present for ksdevice=bootif. (rvykydal)
- syntax errors correcting (vpodzime)
- Apply one more fix for "logvol --label=" (#673584) (clumens)
- Fix test for resized LV to ensure we schedule the format resize action.
(dlehman)
- Make sure a bootloader device is selected (#595951) (bcl)
- Another fix for the loader translations. (akozumpl)
- /var/log/dmesg doesn't exist in a live install. messages does, though.
(dlehman)
- Don't try to unlink a config file that isn't there. (dlehman)
- Handle md name-mangling based on hostname/homehost WRT exclusiveDisks.
(dlehman)
- Adjust DeviceTree.isIgnored's handling of loop, ram, and live devices.
(dlehman)
- Allow scanning of already-active md devices. (#680226) (dlehman)
- Don't clobber exclusiveDisks unless there are disk images. (dlehman)
- Do on-demand scanning of md container if needed. (#678877) (dlehman)
- Fix md array spares test. (dlehman)
- Fix udev_device_is_md. (dlehman)
- Add /var/lib/yum to the list of directories we set context on (#681494).
(clumens)
- Pass createUser and createGroup an arguments dict. (clumens)
- Check all PV ancestor devices for growable partitions. (dlehman)
- Enable network if sshd boot option is used (#643738) (rvykydal)
- Fix setting of loaderData->method from repo= cmdline option. (rvykydal)
- Gotta catch 'em all parted exceptions. (akozumpl)
- Give an indication how many packages are left in cmdline mode (#681614).
(clumens)
- Dynamic strings make gettext translations fail. (akozumpl)
- devt.h is no longer useful, remove it. (clumens)
- Remove 'Back' button on depsolving exception for ks installs (#673170)
(dcantrell)
- Ensure remount requests go through isys.mount() (#678520) (dcantrell)
- Check repo instead of method type when enabling network in loader (#673824)
(rvykydal)
- Fix setting of some network values in loader kickstart (#679825). (rvykydal)
- Loader should activate, stage 2 configure network devices. (rvykydal)
- Do not activate first ks network device automatically in non-network
installs. (rvykydal)
- Always activate first kickstart network device (rvykydal)
- Make kickstart network command reconfigure active device in loader (rvykydal)
- Use NM for ibft configuration (rvykydal)
- Reset only ifcfg file of device we failed to activate (rvykydal)
- Initialize iface structure properly (rvykydal)
- Add kickstart network --nodefroute option (rvykydal)
- Add support for ks network --bootproto=ibft (rvykydal)
- Wait for activation of specific devices instead of NM (rvykydal)
- Parse all kickstart network commands in loader too (rvykydal)
- Activate all devices set by kickstart network --activate command (rvykydal)
- Parse new kickstart options network --activate and --nodefroute. (rvykydal)
- Fixup upgrade test for findExistingRoots change (#681267) (bcl)
- Change upgrade to use findExistingRootDevices (#681267) (bcl)
- Initialize locale before the kickstart/virtio check (#679702) (msivak)
- Clarify that loader method entries are looking for a tree. (clumens)
- Fix up remaining anaconda.id references (#680296) (bcl)
- Wipe out pre-existing problems before running transaction (#678201, pmatilai). (clumens)
- Attempt at fixing reboot behavior in kickstart (#676968). (clumens)
- brcm_iscsiuio is not in Fedora yet, handle that you can't find it. (akozumpl)
- Fix downloading .treeinfo files for --noverifyssl repos. (akozumpl)
- Fix syntax error from 0bf0cf13. (akozumpl)
- Pass --force when calling vgreduce --removemissing. (#679206) (dlehman)
- Only apply global passphrase to devices with no passphrase. (#679223) (dlehman)
- Perform terminations before unmounting filesystems on shutdown. (dlehman)
- Get size + summary from yum package object instead of callback key (pmatilai)
- Test for stringiness instead of explicit rpm.hdr class in install callback (pmatilai)
- Remove unused doneFiles counting from transaction callback (pmatilai)
- Handle nfsiso in promptForNfs as well (#678413). (clumens)
- If the umount in getFileFromNfs fails, log it. (clumens)
- Correct the return values of some backend base class methods. (#679107) (dlehman)
- Change xhost auth when doing a liveinst (#663294) (bcl)
- Override kernel cmdline updates (bcl)
- Write --noverifyssl to repos and urls in kickstart where fit. (akozumpl)
- Do all dm handling inside addUdevDMDevice. (#672030) (dlehman)
- Remove storage/miscutils.py, it is not used. (akozumpl)
- Be better at handling killed metacity. (akozumpl)
- Remove Dispatcher.firstStep. (akozumpl)
- remove InstallerControllerWindow.setup_theme() (akozumpl)
- Make the dispatcher call the shots. (akozumpl)
- icw._doExit is now icw.close() (akozumpl)
- remove trailing whitespace from gui.py and installclass.py (akozumpl)
- gui: remove ics.setScreenNext() and ics.getScreenNext(). (akozumpl)
- Clean up vg name generator and default to "vg_image" in image installs. (dlehman)
- Fix calculation of md array spare count. (dlehman)
- createSuggestedVGName takes a hostname, not a Network instance. (dlehman)
- Show correct device path in PV create progress window. (dlehman)
- VNC does not support runtime SecurityTypes changes (#678150) (mgracik)
- Support cciss devices in get_sysfs_path_by_name(). (akozumpl)
- Don't clear partition 1 from mac disks even if it has no name. (#674105) (dlehman)
- Handle quotes around labels and UUIDs in /etc/fstab. (#670496) (dlehman)
- Clean up a bunch of exception handling code. (dlehman)
- Don't show loaderSegvHandler or its glibc entry point in tracebacks. (pjones)
- The default kickstart UI is graphical, specify other if you want it (#678095). (clumens)
- Only check for the addons of enabled repos (#677773). (clumens)
- Fix build - add Makefiles for new unittests to configure.ac (wwoods)
- Fix a thinko when setting up the base repo for NFSISO (#676821). (clumens)
- Take out the part about anaconda being of little use (#677522). (clumens)
- Fix loading translations in loader (#677648). (clumens)
- Don't always attempt to load updates on kickstart installs (#677131). (clumens)
- s390x has firstboot now (dcantrell)
- Don't fail on missing %includes during loader kickstart processing (#676940). (clumens)
- Prompt for media check on DVD installs (#676551). (clumens)
- Tighten the focus of the dogtail and X try/except blocks. (dlehman)
- Stop overriding ext[234] filesystem defaults. (dlehman)
- Make Storage function in the absence of an Anaconda instance. (dlehman)
- Fix DeviceTree to function in the absence of an InstallInterface. (dlehman)
- Remove some udev hackery that was only needed for two-stage env. (dlehman)
- Move large anaconda.__main__ tasks into functions. (dlehman)
- Generate locale files on request (msivak)
- Fix up tests for changes in split media handling (wwoods)
- Update unit testing targets in Makefile.am (tmlcoch)
- Add new tests from the unittests branch (tmlcoch)
- Fix open method in mock/disk.py. (tmlcoch)
- Improve of mock/disk.py. (tmlcoch)
- Remove the old suite() crud from kickstart testing, python-nose work differenlty (msivak)
- Tag tests as slow or acceptance tests and split full testing from devel unit testing (msivak)
- Mock _isys and block modules in fw test. They are not needed. (msivak)
- In text mode we have to treat strings and lists separately while printing them (#676942) (msivak)
- Fix some whitespace errors in iscsi kickstart code. (pjones)
- Fix mis-management of luks dict when renaming encrypted lvs. (dlehman)
- Don't raise NotImplementedError from non-essential backend methods.
(dlehman)
- Remove upgrade.findExistingRoots since it does nothing. (dlehman)
- tui: add reinitializeWindow() to the text interface. (akozumpl)
- typo: missing dot in the reinitialization dialog glade file. (akozumpl)
- gui: remove an unneeded parameter from questionInitializeDisk() (akozumpl)
- Remove quotes from udisks command in liveinst (#672022) (bcl)
- Fix iutil import in bootloader config screen (#676032). (clumens)
- Don't write our own udev persistent net rules; use udev's generator.
(notting)
- Add upd-bootiso script (bcl)
- Fix typo in GPT warning (#675242) (bcl)
- remove unused variables (mschmidt)
- Fix support for "logvol --label=" (#673584). (clumens)
- Fix the taint flag check. (clumens)
- Set default resolution of anaconda.glade to 800x600 (dcantrell)
- Make singlePV a more useful boolean, clean up _getSinglePV() (dcantrell)
- Remove width and height parameters from gui.readImageFromFile() (dcantrell)
- Sort singlePV=True requests so they come first. (dcantrell)
- Move reipl step to be after instbootloader step. (dcantrell)
- Remove 'Change device' button from bootloader screen on EFI systems (#582143)
(wwoods)
- Add anaconda --version support (#673150). (clumens)
- Remove forced 800x600 geometry switch for Xvnc (dcantrell)
- writeMtab -> makeMtab (#673158). (clumens)
- Let dm_node_from_name admit it's defeated. (akozumpl)
- Disable partition resize support for DASD labels (#605912) (dcantrell)
- We don't need the command names anymore. (clumens)
- Convert kickstart functions to use Python. (clumens)
- Move all kickstart functions into kickstart.c. (clumens)
- Get rid of the kickstart command codes, and alphabetize the command table.
(clumens)
- Add the flags required to link against python. (clumens)
- Remove ksReadCommands, convert to using pykickstart for parsing. (clumens)
- Add functions to support interfacing loader with pykickstart. (clumens)
- Fix syntax error from fdd06a4053e2965bdc1719425b6d99fe80ab1e18. (akozumpl)
- Only remove /tmp/updates and /tmp/updates.img if they exist. (clumens)
- YumBackend doesn't inherit from YumBase. AnacondaYum does. (#671577)
(dlehman)
- After copying live rootfs to root device, grow it to fill the device.
(dlehman)
- Make sure /boot is mapped to a single LVM PV on s390x (dcantrell)
- Unmount filesystems before shutdown or reboot on s390x (#605577) (dcantrell)
- And update to the latest version of the RAID command. (clumens)
- Make the advanced storage dialogs stay in the foreground. (akozumpl)
- Make lighter-weight versions of dm map name/node resolution functions.
(dlehman)
- Make /etc/mtab a symlink to /proc/self/mounts. (#670381) (dlehman)
- Require the pykickstart version with "raid --label=" support. (clumens)
- No longer run hal-lock on live installs (#670312). (clumens)
- Add support for "raid --label=" (#670643). (clumens)
- self.storage -> storage in kickstart execute methods. (clumens)
- Don't prompt on broken lvm or uninitialized disks in cleanup mode. (dlehman)
- Don't offer minors of ignored md devices when creating new md devices.
(dlehman)
- Make sure devices ignored by the devicetree are in _ignoredDisks. (dlehman)
- Don't try to add spares to active md arrays. (#652874) (dlehman)
- Fix the traceback from c6228535b26a63b0544f4a558a69076581b2a69f. (akozumpl)
- Those missing mnemonicks will not stand. (akozumpl)
- Provide a new mpath devicelib interface that does not reorder the devices.
(akozumpl)
- Enable support for static ipv6= cmdline option. (rvykydal)
- mpath: create /etc/multipath/bindings file. (akozumpl)
- Fix DMLinearDevice._postSetup to not take or pass an 'orig' arg. (dlehman)
- There's no more MainframeDiskDevice, so don't call its __str__. (clumens)
- We have to pass a blank argument list to execWithCapture. (clumens)
- We have to mount /boot/efi when we find an old one. (pjones)
- Only allow one EFI System Partition to exist at a time. (pjones)
- Conditionalize use of UEFI on boot.iso (pjones)
- Check fstab entries against fmt.mountType not fmt.type (pjones)
- Fix nfsiso install with options (#667839) (mgracik)
- Split out common code from device setup/teardown/create/destroy for reuse.
(dlehman)
- Remove createParents methods. They don't do anything. (dlehman)
- Add status/progress ui abstraction to device classes. (dlehman)
- Remove unused code related to device probe methods. (dlehman)
- Suddenly, we need gnome-themes-standard. (akozumpl)
- Bold the warning for GPT on non-EFI (#614585) (bcl)
- Warn the user when using a GPT bootdisk on non-EFI systems (#614585) (bcl)
- Support /boot on logical volume on s390x (#618376) (dcantrell)
- Update example ssh command in linuxrc.s390 (dcantrell)
- Start rsyslogd from linuxrc.s390 (#601337) (dcantrell)
- Update spinbutton value in dialogs (#621490) (bcl)
- Convert livecd.py to use the storage module where appropriate. (dlehman)
- Don't try to teardown the live device or associated loop devices. (dlehman)
- Add flag indicating whether a device can be activated/deactivated. (dlehman)
- Include the livecd OS image devices in the device tree. (dlehman)
- Include file-backed loop devices in the device tree. (dlehman)
- Use sysfs instead of losetup to find loop devs' backing files. (dlehman)
- Clean up and close yum/rpm files once we're done with them. (dlehman)
- logging: log_method_return() for devicetree.getDeviceByName() (akozumpl)
- logging: get rid of storage_log.py (akozumpl)
- mpath: filter out the slave devices and their partitions. (akozumpl)
- mpath: use both 'multipath -d' and 'multipath -ll' to get the topology.
(akozumpl)
- mpath: remove a harmful udev_trigger() in filter_gui (akozumpl)
- Support enabling repos listed but disabled in /etc/yum.repos.d (#663992).
(clumens)
- Add /sbin to the $PATH for the shell on tty2. (clumens)
- Make sure to set a self.anaconda reference on data objects too. (clumens)
- Remove mknod-stub. We have the full one around now. (clumens)
- Use a different method to get the sysfs_path for device-mapper devices
(#665643). (clumens)
- Allow existing /var/log (bcl)
- Add /sbin/cio_ignore to the KEEPFILE list on s390x (dcantrell)
- Remove MainframeDiskDevice class, use description property. (dcantrell)
- Focus the dialog after a message window is closed (mgracik)
- Change the device reinitialization dialog (mgracik)
- Rename anaconda-image-cleanup and use it for all cleanup in liveinst.
(dlehman)
- Add handling for cleanup of luks devices with unexpected map names. (dlehman)
- Add ability to clean up prior to live install. (dlehman)
- Fix looking up storage device IDs when writing out anaconda-ks.cfg (#591713).
(clumens)
- Don't write out a duplicate mtab to /mnt/sysimage (#568539). (clumens)
- Raise an exception if X*Display functions fail (#663294). (clumens)
- mpath: make sure /var/log exists exists early. (akozumpl)
- mpath: log the /etc/multipath.conf contents (akozumpl)
(dlehman)
- Set up disk images earlier so kickstart device filtering works on them.
(dlehman)
- Don't try to parse network device info when doing disk image installs.
(dlehman)
- Fix DeviceTree cleanup w/ inactive luks devs in cmdline mode. (dlehman)
- Add losetup to the install image, re-remove it from isys (#662183). (clumens)
- "anaconda" -> "self.anaconda" in kickstart execute methods. (clumens)
- Override the BaseHandler.dispatcher method. (clumens)
- Use chreipl to set the IPL device on s390x (#632325) (dcantrell)
- Add /usr/sbin/chreipl to KEEPFILE. (dcantrell)
- Create a MainframeDiskDevice class for common s390 attributes. (dcantrell)
- Do not shut down zFCP storage in Storage.shutdown() (#612626) (dcantrell)
- Clarify the ssh modes for installation on s390x (#621590). (dcantrell)
- devicelibs/mpath.py: do not rely on other modules to import logging.
(akozumpl)
- filter_gui: device discovery configuration is under anaconda.storage.config.
(akozumpl)
- Device destroy actions can only require other destroy actions. (#651589)
(dlehman)
- Use wipefs from util-linux-ng instead of dd to wipe old sigs. (dlehman)
- Add cleanup-only mode to DeviceTree.populate. (dlehman)
- Add unit tests for storage.partitioning.getNextPartitionType. (dlehman)
- Only try logging to tty3 if we have permission to do so. (dlehman)
- Enable network when getting .treeinfo (#632526) (rvykydal)
- Fix default of network --device option to match rhel5 (#647462). (rvykydal)
- Do not backtrace if repo is specified through kickstart only (#659781).
(akozumpl)
- Restore list-harddrives output to what users expect (#654436) (dcantrell)
- Permit ext4 and ext2 for /boot on s390x (#638734) (dcantrell)
- Check for ARPHRD_ETHER and ARPHRD_SLIP types in getDevices (#596826)
(dcantrell)
- Preserve and otherwise ignore noauto fstab entries. (#660017) (dlehman)
- Fix "logvol --percent=" (#651445, jruemker). (clumens)
- Add chroot command to bash_history. (pjones)
- support for partial offload in udev_*_iscsi() functions. (akozumpl)
- iscsi: partial offload drivers. (akozumpl)
- analog: put it under /usr/bin so it's on the path in an installed system.
(akozumpl)
- Remove commented out broken code from LoopDevice.status. (dlehman)
- Don't traceback when the action list is empty. (#657891) (dlehman)
- Remove unused udev_device_is_{multipath,dmraid}_partition functions.
(dlehman)
- Set dm-uuid for anaconda disk image devices from devicetree. (dlehman)
- Remove some unnecessarily hard-coded "/dev/mapper" strings. (dlehman)
- Put the backend logger's config file in /tmp. (dlehman)
- Move handling of /proc/bus/usb and /selinux into storage. (dlehman)
- swapoff -a is only needed for livecd, so only do it for livecd. (dlehman)
- Unlink backend logger config file when stopping logger. (dlehman)
- Make FileDevice.path more consistent. (dlehman)
- Add support for detecting already-active lvm. (dlehman)
- Fix addUdevDevice so we can actually handle already-in-tree devices.
(dlehman)
- Make it possible to ignore md-fwraid member disks. (dlehman)
- Revert rpmdb symlink hack. (dlehman)
- Remove some unused code from storage.devicelibs.dm. (dlehman)
- Add support for installing onto block device image files. (dlehman)
- Generalize some of the device-mapper partition handling. (dlehman)
- Add support for loop devices. (dlehman)
- Add support for linear device-mapper devices. (dlehman)
- Fix PartitionDevice.path to work with device-mapper disks. (dlehman)
- There's no need to pass exclusiveDisks to doPartitioning separately.
(dlehman)
- Move storage device scanning parameters into a separate class. (dlehman)
- Don't ignore %packages if --default is given (#621349, dcantrell). (clumens)
- Don't traceback when displaying %post error messages (#654074). (clumens)
- Display a warning message on TAINT_HARDWARE_UNSUPPORTED (#623140). (clumens)
- If getting .treeinfo fails, try treeinfo (#635065). (clumens)
- instPath -> rootPath (clumens)
- Add rdate, tty, which to install image (mgracik)
- Don't add --enablefingerprint unless fprintd-pam is installed (#656434).
(clumens)
- Add biosdevname to installer environment (Matt_Domsch)
- Add ntpdate to install.img (#614399) (mgracik)
- It's /usr/bin/gdbserver. (akozumpl)
- Handle dm-N devices pointed to by /dev/disk/ paths (#605312) (bcl)
- Resolve /dev/disk/ devices during rescue (#605312) (bcl)
- Do not auto-check all drives when creating a RAID partition (#641910).
(akozumpl)
- (Un)select all button in Partition Editor. (akozumpl)
- Show the total amount of space used by snapshots in the VG editor dialog.
(dlehman)
- Add support for detecting lvm vorigin snapshot volumes. (#633038) (dlehman)
- Don't display free space at end of extended unless > 1MB. (#626025) (dlehman)
- Set SELinux context on /etc/localtime (#653867). (clumens)
- Get a little more output from the unittest runner. (clumens)
- Remove writeRpmPlatform, adjust callers. (#651132, #650490) (notting)
- Import as "pyanaconda.anaconda_log", not "anaconda_log". (clumens)
- A little too much got deleted from imount.c. (clumens)
- Remove the popping portion of kickstart %pre script notification. (clumens)
- Add pyanaconda/.libs to the PYTHONPATH for pylint. (clumens)
- Ignore several false positives and import errors while running pylint.
(clumens)
- Remove the parts required to make "make tests" work. (clumens)
- nosetests will only run tests if they are not executable and end in _test.py.
(clumens)
- Set up the PYTHONPATH for running nosetests. (clumens)
- tsort_dict -> tsort in the test case. (clumens)
- Return mount's actual error codes instead of obfuscating them. (dlehman)
- Remove log message saying we don't know how to sanity check storage.
(dlehman)
- Move check for ext2 filesystem journal from FS to Ext2FS. (dlehman)
- Remove mkdirChain() from isys, use g_mkdir_with_parents() (dcantrell)
- Do not force -O2 in CFLAGS. (dcantrell)
- Remove unused unpackCpioBall() function. (dcantrell)
- Use unpack_archive_file() instead of unpackCpioBall() (dcantrell)
- Use libarchive helper functions in explodeRPM() (dcantrell)
- Add libarchive helper functions for loader in unpack.c (dcantrell)
- Remove include lines for stubs.h from isys. (dcantrell)
- Remove isys cpio extraction code. (dcantrell)
- Fix typo in my ctc commit (#648858) (bcl)
- Fix ctc check logic (#648858) (bcl)
- timezones: fix a scrolling problem with the scdate's GUI TreeView. (akozumpl)
- timezones: remove unneeded imports (akozumpl)
- Fix variable substitution in kickstart files (bcl)
- Don't show the cleardisk dialog on upgrades (#649865). (clumens)
- Use a stronger RNG for password salt (mitr)
- Use SHA-512 for bootloader password encryption (mitr)
- Support grub --encrypted when set from kickstart (mitr, #554874). (clumens)
- use different approach to tweak gconf settings in the image (#642358).
(akozumpl)
- Allow loader to re-prompt for networking when network activation fails
(jlaska)
- Support devices larger than 1.5TB (#649095, rspanton AT zepler DOT net).
(clumens)
- Fix test for CTC devices from yesterday. (clumens)
- iscsi, logging: reuse the global ISCSID in has_iscsi(). (akozumpl)
- iscsi: refactor the kickstart processing to use the new iscsi methods.
(akozumpl)
- Do not rely on presence of DEVICE setting in ifcfg files. (rvykydal)
- Do not sort settings in ifcfg file. (rvykydal)
- Remove obsolete networking code. (rvykydal)
- Support installation to CTC devices in loader (#648858, karsten). (clumens)
- Add more modules to the list of things liveinst must load. (clumens)
- Don't look for a CD number in readStampFileFromIso. (clumens)
- mediaCheckCdrom now supports checking only one piece of media. (clumens)
- Remove support for writing disc number info to .treeinfo and .discinfo.
(clumens)
- Remove support for split media transactions from yuminstall.py. (clumens)
- Remove unused currentMedia parameter. (clumens)
- mediaHandler no longer needs to worry about mounting anything. (clumens)
- Rework _switchCD and _switchMedia for a one-image world. (clumens)
- umountImage shouldn't care about currentMedia. (clumens)
- Remove presentRequiredMediaMessage and related code. (clumens)
- Rename findIsoImages to findFirstIsoImage. (clumens)
- verifyMedia no longer looks at the disc number. (clumens)
- hwclock lives in /sbin now. (akozumpl)
- timezone_text.py: remove the commented out parts and never called methods.
(akozumpl)
- gui: remove "swapped" attribute from anaconda.glade (akozumpl)
- Errors downloading .treeinfo files should not be logged as errors. (clumens)
- When we can't fetch group metadata, log why. (clumens)
- Log which step we're on in doLoaderMain. (clumens)
- On upgrades, inform the user what action is taking place (#493249). (clumens)
- Fix import to not drag in a conflicting ConfigParser. (clumens)
- If there are any troubles reading the treeinfo file, return no addons.
(clumens)
- Only build EFI images on x86_64 (jlaska, #646869). (clumens)
- restart-anaconda: full path to iscsiadm (akozumpl)
- iscsi: ISCSID needs to be declared global in has_iscsi() (akozumpl)
- Fix two problems with initrds for multipla kernels during a pungi compose.
(akozumpl)
- Fix the locale value for Bengali (India) (mgracik)
- specfile: anaconda requires GConf2 during runtime. (akozumpl)
- timezones: use more of s-c-date (#520631). (akozumpl)
- Don't hardcode the sshd location, either. (clumens)
- Move StorageTestCase into its own file for use by other tests. (dlehman)
- Actions' devices must be in the tree except for ActionCreateDevice. (dlehman)
- Fix StorageDevice.resizable to check self.format.type, not self.format.
(dlehman)
- Cleanup some preconditions in DeviceAction constructors. (dlehman)
- Add device action test suite. (dlehman)
- Fix test environment python path. (dlehman)
- Reimplement action pruning and sorting using tsort and action deps. (dlehman)
- Add requires and obsoletes methods to DeviceAction classes. (dlehman)
- Add a topological sort implementation for use in sorting device actions.
(dlehman)
- Only log storage to tty3 if we have permission to do so. (dlehman)
- Remove PartitionDevice.path hack. (dlehman)
- Use 'name' instead of 'device' for device name ctor arg in all Device
classes. (dlehman)
- Qualify devicelibs.lvm instead of relying on namespace clutter. (dlehman)
- Make the various DeviceAction.isFoo methods into properties. (dlehman)
- Establish a unique id for each DeviceAction instance. (dlehman)
- Add logpicker to keepfile list in upd-instroot. (tmlcoch)
(clumens)
- Search for iscsid in the $PATH, not in a hardcoded list of places (#645523).
(clumens)
- Use glib for getPartitionsList() (dcantrell)
- Include the SELinux policy file, not just the directory. (clumens)
- Remove the last references to install.img. (clumens)
- Properly identify device-mapper partitions set up by kpartx. (#644616)
(dlehman)
- Don't ever try to mount ntfs filesystems. (#637319) (dlehman)
- We don't need to worry about 2.4 -> 2.6 updates anymore. (clumens)
- scsiWindow is unused. Kill it. (clumens)
- Add some debugging prints. (clumens)
- Don't prompt for kbd, lang, or network on CD/DVD installs. (clumens)
- We no longer need to copy the install.img over and lochangefd to it.
(clumens)
- Also rework image loading for CD/DVD installs. (clumens)
- Remove a bunch of unused support functions. (clumens)
- Use parseDeviceAndDir instead of reimplementing the same things two more
times. (clumens)
- Rework how image loading works for HD installs. (clumens)
- Remove the unused mountNfsImage and all code that was only called by it.
(clumens)
- Rework how image loading works for NFS installs. (clumens)
- Remove the unused iurlinfo, urlInstallData, and fix up URL kickstarts.
(clumens)
- Initialize loaderData->method. (clumens)
- Remove the unused mountUrlImage function. (clumens)
- Rework how loading images works for URL installs. (clumens)
- urlinstTransfer and support functions do not operate on iurlinfo anymore.
(clumens)
- urlMainSetupPanel no longer takes an iurlinfo. (clumens)
- Deprecate stage2=, keep method= as it's been for a long time now. (clumens)
- migrate_runtime_directory no longer does anything useful. (clumens)
- Remove the method selection block from the beginning of doLoaderMain.
(clumens)
- Fix up copying of firmware. (clumens)
- Correct paths of things started by loader/init that have moved. (clumens)
- Step 3 of merging installer images: No longer create install.img. (clumens)
- makeinstimage is no longer used. (clumens)
- instbin is no longer used. (clumens)
- A couple minor changes to mk-images. (clumens)
- Step 2 of merging installer images: Move most everything out of makeinitrd.
(clumens)
- Step 1 of merging installer images: Don't copy files into a new root.
(clumens)
- No longer do the bin -> usr/bin copy song and dance. (clumens)
- Fix typo in examine_gui.py (bcl)
- Clean up tabs in examine_gui.py (bcl)
- Rework proxy handling so that .treeinfo also uses proxy (#634655) (bcl)
- Translate task and repo names based on the product.img (#622064). (clumens)
- Use baseurl instead of methodstr to get .treeinfo (#604246) (rvykydal)
- Be more resilient to config files missing sections and options (#590591).
(clumens)
- Add repos for all addons in all enabled repositories (#580697). (clumens)
- Add a method that fetches and returns the .treeinfo file. (clumens)
- All uses of perl must die. (clumens)
- A block quote in the middle of a python file does nothing. (clumens)
- Fix traceback after Delete in nm-c-e (#642370) (rvykydal)
- Fix ifcfg logging message. (rvykydal)
- Fix porting of ifcfg logging. (rvykydal)
- Rescan disks when moving back through upgrade check (#635778) (bcl)
- anaconda: Disable X server regenerations (#609245) (ajax)
- Attempt to bring the network up before saving a bug report (#635821).
(clumens)
- No one likes the welcome step anymore, so remove it. (clumens)
- iscsi, cosmetic: fix grammar in the iscsi dialogs. (akozumpl)
- iscsi: call iscsi.stabilize() at the end of the iscsi configuration.
(akozumpl)
- iscsi: consolidate logging in the UI (akozumpl)
- iscsi: allow separate discovery/login credentials in TUI. (akozumpl)
- iscsi: migrate the CRED_ constants and parse_ip() to partIntfHelpers.
(akozumpl)
- iscsi gui: use abstract methods in the iSCSIWizard interface. (akozumpl)
- iscsi gui: factor out the drive adding code. (akozumpl)
- iscsi gui: make the iSCSI wizard never return gtk constants. (akozumpl)
- isci: typo in a GUI checkbox (akozumpl)
- Add logpicker support into Makefiles, anaconda.spec.in, configure.ac and upd-
instroot. (tmlcoch)
- Add logpicker tool into utils (tmlcoch)
- gui: hide text in the proxy password field (#611825). (akozumpl)
- logging: be smarter logging UI module import errors. (akozumpl)
- text.messageWindow(): make it more resilient to the input. (akozumpl)
- Log that we are running %pre scripts to the console (#640256). (clumens)
- Preset default config for immediate Close in nm-c-e enablement (#636526)
(rvykydal)
- Fix non-dhcp network enablement in stage 2 (#640951) (rvykydal)
- Set focus after error message (#611430) (tmlcoch)
- When upgrading a package instead of installing, say so (#636520, jlaska).
(clumens)
- Do a better job of explaining how much memory is required to install
(#639056). (clumens)
- Get rid of mountLoopback and umountLoopback. (clumens)
- copyright notice in add_drive_text.py (akozumpl)
- restart-anaconda: log out of all iscsi nodes (akozumpl)
- remove EXN_ constants from constants.py (akozumpl)
- Honor selected hostname on Live CD (#638634) (rvykydal)
- Do not try to prompt for network for escrow in kickstart (#636533) (rvykydal)
- Sync up list of languages with contents of po/ directory. (clumens)
- Fix a storage logging import (#636621). (clumens)
- Fix a couple pylint-found errors. (clumens)
- Copy ifcfg.log into traceback and target system. (rvykydal)
- Improve logging of ifcfg stuff. (rvykydal)
- Refactor DNS resolver reset. (rvykydal)
- Add placeholders to ambiguous python strings (#634385). (clumens)
- Dynamically initialize MALLOC_PERTURB_ when loader starts. (pjones)
- btrfs will be a supported filesystem in F15 (josef). (clumens)
- Fix setting of $HOME (pjones)
- Limit progress bar amount to 1.0 (bcl)
- Save the partition type selection when moving back (#635778) (bcl)
- Properly rescan disks when moving back (#635778) (bcl)
- Reset resolver after network device activation (#632489) (rvykydal)
- Don't include the product name in the translation (#636415). (clumens)
- Clarify loopback mount log message (#633444). (clumens)
- pykickstart now raises KickstartError instead of IOError. (clumens)
- Fix EFI bootloader install problems (#635873, #635887) (bcl)
- Re-add cleardiskssel step when autopart is chosen. (#635332) (dlehman)
- Pull boot splash image from correct location (#635330) (bcl)
- Add files for polkit to initrd.img (#633315) (rvykydal)
- Remove old kernels with new bootloader (#633234) (bcl)
- Both the inittab and systemd sections can return. Move this part earlier.
(notting)
- iscsi: discovery and node login wizard. (akozumpl)
- Pass xdriver to anaconda in liveinst (#633827) (bcl)
- Add test cases for the new Size class. (dcantrell)
- Add exceptions specific to the new Size class. (dcantrell)
- Create Size class for specifying device and fs sizes. (dcantrell)
- Fix importing the netconfig UI in rescue mode (#632510). (clumens)
- Add noeject support to cdrom eject handling (#477887) (bcl)
- Cleanup tabs in flags.py (bcl)
- Add noeject support to loader (#477887) (bcl)
- Remove BETANAG, instead reading it from .buildstamp (#628688). (clumens)
- Convert .buildstamp into a .ini-style file. (clumens)
- Remove productPath. (clumens)
- Remove any /tmp/yum.log that may be present on the installed system
(#630327). (clumens)
- If the filesystem doesn't support resize, there's no resizesb (#627153).
(clumens)
- Run anaconda in fullscreen mode. (clumens)
- minor: gtk.CellRendererText has no property 'active'. (akozumpl)
- restart-anaconda: kill iscsid too (akozumpl)
- ui: fix the default choice in the 'advanced storage options' dialog.
(akozumpl)
- iscsi: rename variable in addIscsiDrive. (akozumpl)
- ui: a couple of storage mnemonics. (akozumpl)
- updates: .glade files are in data/ui now. (akozumpl)
- Re-fix systemd default link (#627401, mschmidt). (clumens)
- Remove losetup and unlosetup from isys (bcl)
- Remove losetup usage (bcl)
- Various upd-instroot cleanups, most importantly for firstaidkit (#627758).
(clumens)
- Shrink locale-archive down to just what we support. (clumens)
- Remove the icon-theme.cache file from the initrd. (clumens)
- Remove /etc/selinux/targeted/modules/active from the initrd (clumens)
- Remove the DRI modules from the initrd. (clumens)
- i18n: do not build translatable sentences from parts (#622545). (akozumpl)
- memory: install.img is now >150 MB so count 192 MB extra for it. (akozumpl)
- memory: check_memory() displays GUI dialog on livecd (#624534). (akozumpl)
- readvars should split variables into at most 2 pieces (bcl)
- Adding output to method selection process (bcl)
- Unlock the CD tray door in isys.ejectcdrom() (#569377) (pjones)
- Try to pull in generic libraries as well as optimized ones (#572178)
(pjones)
- Translate the Back button in glade (#576082) (akozumpl)
- Make the kernel 'sshd' parameter work as expected (#572493) (akozumpl)
- Add originalFormat handling to editLVMLogicalVolume. (#576529) (dlehman)
- Fix a cut&paste error that caused a traceback (#574743) (dlehman)
- Remove isys/str.c, replace calls with glib.h or string.h calls. (dcantrell)
- Only look for extended partitions on partitioned devices (#576628)
(hdegoede)
- Fix referring to disks by-label, by-uuid, etc (#575855). (clumens)
- fcoe startEDD() add missing return statement (hdegoede)
- Add support for recognizing BIOS EDD configured FCoE drives (#513018)
(hdegoede)
- Update format of cdrom devices when looking for repos on media (#566269)
(rvykydal)
- Fix syntax for passing a mapping to a translatable string (#576085).
(clumens)
- Update filter for translation log entries. (dlehman)
- Don't pass size=1 for autopart PVs. Use PartitionDevice's default size.
(dlehman)
- Update po/POTFILES.in to list all files with strings. (dcantrell)
- platform.py: _diskLabelType is a string itself (hdegoede)
- Make python start with correct default unicode encoding (#539904).
(akozumpl)
- Add boot= argument to kernel cmdline when in fips mode (#573178) (hdegoede)
- Catch NotImplementedError when scanning for disklabels (#566722) (hdegoede)
- BIOS RAID sets get shown double when adding advanced storage (#574714)
(hdegoede)
- Filter UI do not start / stop BIOS RAID sets to get there size (#574587)
(hdegoede)
- Make filter UI honor nodmraid cmdline option (#574684) (hdegoede)
- Properly align the first partition we create (#574220) (hdegoede)
- Move disabling of cylinder alignment to disklabel format (hdegoede)
- put the analog script into the RPM (akozumpl)
- Fix focus, repaint, and stack issues for nm-c-e (#520146) (rvykydal)
- Connect nm-connection-editor to network config button (#520146). (rvykydal)
- Add "Configure Network" button to network UI screen (#520146). (rvykydal)
- Add nm-connection-editor to stage2 (#520146). (rvykydal)
- l10n: Updates to Spanish (Castilian) (es) translation (gguerrer)
- Don't try to set selinux context for read-only mountpoints. (dlehman)
- Derive stage2= from repo=nfsiso: correctly (#565885) (rvykydal)
- Include USB ATA bridge modules in initrd (#531532) (rvykydal)
- Remove hacks that don't apply in present repo setup flow. (rvykydal)
- Reset comps/groups info after editing repo in UI (#555585) (rvykydal)
- Set cache base directory for repos added/edited in UI. (rvykydal)
- Use None, not '', for empty repo proxy attributes (#572460) (rvykydal)
- livecd: show graphical error dialog when memory check fails (#572263)
(akozumpl)
- l10n: Updates to Sinhala (si) translation (snavin)
- use isSparc not isSPARC (dennis)
- set the bootloader to silo for sparc installs (dennis)
- sparc64 is a lib64 arch (dennis)
- Make sure that SPARC bootdisk Makefile is made (dennis)
- make sure we include sparc boot configs (dennis)
- add function to get the sparc system type (dennis)
- Sparc bootloader config not written to /etc (dennis)
- Fix generation of boot.iso on SPARC (dennis)
- l10n: Updates to Polish (pl) translation (raven)
- Keep the selected device count right when going back to filtering
(#572882). (clumens)
- Fully qualify _ped.IOException. (dlehman)
- Do not crash on .autorelabel when using read only rescue mount (#568367)
(msivak)
- parted.PartedDisk can throw IOExceptions too (#573539) (hdegoede)
- l10n: fix/updates to hungarian translation (snicore)
- l10n: updated translations (snicore)
- Use the disk name from kickstart in the shouldClear error message.
(clumens)
- Fix displaying error messages on cleanup/remove callback problems
(#572893). (clumens)
- Before running shouldClear, make sure a real disk was specified (#572523).
(clumens)
- Fix: execWithRedirect() unexpectedkeyword argument 'searchPath' (#572853)
(hdegoede)
- Tell ld.so and friends not to use hardware optimized libs (#572178)
(pjones)
- By default, libcurl does not appear to follow redirects (#572528).
(clumens)
- FcoeDiskDevice.dracutSetupString: handle DCB on / off option (hdegoede)
- Redo the 'sshd' flag. (ajax)
- Catch "Exception" when window manager is starting. (akozumpl)
- Preserve encryption setting when re-editing new encrypted LVs. (#568547)
(dlehman)
- Never pass "<Not applicable>" as mountpoint to format constructors.
(dlehman)
- Fix up device dialogs' handling of preexisting formatting. (dlehman)
- Set up devices using their original formats for certain action types.
(#565848) (dlehman)
- Keep a handle to devices' original format instance. (#565848) (dlehman)
- Pick up system's clock settings on upgrade. (#570299) (akozumpl)
- Do not crash when getDevices returns NULL (#567939) (msivak)
- Use new API in libblkid to look for driverdiscs on removable devices
(#508242) (msivak)
- Use new package structure of firstaidkit (#510346) (msivak)
- Add "crashkernel=auto" to grub.conf for RHEL installs (#561729) (hdegoede)
- Drop iscsi initrd generation hack (hdegoede)
- Fix recognition of partitions on mdraid arrays (#569462) (hdegoede)
- dcbd is being replaced with lldpad (#563790) (hdegoede)
- Use the same cache directory as yum now uses (#568996). (clumens)
- exception.py: switch to tty1 before exit (#569071) (akozumpl)
- Reset conditionals of transaction info too. (#505189) (rvykydal)
- Use '--keyword=P_:1,2' for plural gettext string extraction (#567417).
(dcantrell)
- make sure the new logging also works when isys is imported as a python
module. (akozumpl)
- use the new logging approach in imount.c (akozumpl)
- allow logging into program.log and syslog through log.c (akozumpl)
- log.c: factor out common parts from logMessageV() (akozumpl)
- static variable rename in log.c (akozumpl)
- move log.c from loader into isys. (akozumpl)
- Analog, a generator of rsyslog config files to monitor remote installs.
(akozumpl)
- Remove isys/minifind.c and isys/minifind.h (dcantrell)
- Keep default metacity schema generated for gconf. (#520146) (rvykydal)
- metacity, fix a displaying problem with WaitWindow and ProgressWindow
(#520146) (akozumpl)
- Nuke addFrame()'s showtitle parameter (#520146). (akozumpl)
- Remove gui code we no longer need when mini-wm is gone (#520146) (akozumpl)
- Remove mini-wm.c. (#520146) (akozumpl)
- Introduces metacity window manager (#520146) (akozumpl)
- fix: do not initialize the install interface whenever is is accessed
(#565872) (akozumpl)
- Select/Deselect All should only apply to the current tab (#516143,
#568875). (clumens)
- Don't try to write firewall and auth information twice (#568528). (clumens)
- Fixes bug #569373 - Change udev_trigger block calls to use change action
(bcl)
- Include the report module and related support files (#562656). (clumens)
- report handles exn saving now, and doesn't require a Filer (#562656).
(clumens)
- Adapt to using report's UI API (#562656). (clumens)
- Do some editing of package and filter UI strings (#569039). (clumens)
- Check for the real device-mapper nodes in /proc/swaps. (#567840) (dlehman)
- It's necessary to give each vfprintf invocation a fresh va_list (#568235)
(akozumpl)
- Don't unconditionally unskip the partition step on failure (#567889).
(clumens)
- rpm doesn't always give the callback a tuple (#567878). (clumens)
- Revert "There is no kernel-PAE package anymore, use kernel for xen
(#559347)." (dcantrell)
- logging: make loader say 'loader' (#563009). (akozumpl)
- Make loader log into syslog (so remote logging works for it as well)
(#524980) (akozumpl)
- DiskLabel.status can't be determined so return False. (#563526,#561074)
(dlehman)
- Remove getDasdDevPort() and getDasdState() from isys.py. (dcantrell)
- Replace calls to isys.getDasdPorts() with calls to new getDasdPorts()
(dcantrell)
- Add getDasdPorts() to storage/dasd.py. (dcantrell)
- Remove isys/dasd.c, functions no longer needed in isys. (dcantrell)
- Fix creation of encrypted md members and pvs in kickstart. (#567396)
(dlehman)
- Don't align free space geometries in getFreeRegions. (#565692) (dlehman)
- Align extended partitions like we do other partitions. (dlehman)
- Don't allow the host's LD_LIBRARY_PATH affect get_dso_deps (#565887).
(clumens)
- Remove a couple redundant network bring up calls. (clumens)
- Reset the resolver cache after bringing up the network (#562209). (clumens)
- Let's have /etc/xorg.conf.d in stage2 (#566396) (akozumpl)
- Add the filter UI screens to the list of translatable files (#567216).
(clumens)
- Don't traceback when a user tries to put /boot on an LV (#566569)
(hdegoede)
- RescueInterface should inherit from InstallInterfaceBase too (hdegoede)
- Fix return values for dasd_settle_all() in linuxrc.s390 (#558881).
(dcantrell)
- Don't reset the default package selection on text installs (#564103).
(clumens)
- Remove rules handled by the device-mapper package's rules. (dlehman)
- Raise default lvm extent size from 4MB to 32MB. (dlehman)
- Add udev_settle after setup of LUKSDevice. (#534043) (dlehman)
- Pass '--force' to vgremove to avoid interactive prompts. (#563873)
(dlehman)
- Find rsyslog libs in $LIBDIR not /usr/$LIBDIR (jkeating)
- "_Do_ override BASEARCH with BUILDARCH, it does make sense (#524235)"
(msivak)
- Don't traceback during kickstart if no ignoredisk line is given (#563581).
(clumens)
- Allow any add-on python module to be updated via an updates.img. (clumens)
- Correct references to lcs and ctcm devices (#561816). (dcantrell)
- Use lsznet.raw from s390utils package (#563548). (dcantrell)
- Revert "Write ARP=no to ifcfg file when VSWITCH=1 is set on s390x
(#561926)." (dcantrell)
- Use /sys/devices/lcs instead of /sys/devices/cu3088 (#561816). (dcantrell)
- Wait for all DASDs to be online after autodetection (#558881). (dcantrell)
- Prompt user for install method when going back to STEP_METHOD. (dcantrell)
- Set initrd load address to 32MB for s390x (#546422). (dcantrell)
- Only show the error message if there was an error. (dlehman)
- Be even more clear about removing existing linux installations. (#493360)
(dlehman)
- Improve reboot modes in init.c and shutdown.c. (akozumpl)
- Be more explicit in which libraries we link with. (clumens)
- Do not override BASEARCH with BUILDARCH, it doesn't make sense (#524235)
(msivak)
- platform.checkBootRequest(): Fix use of map instead of filter (hdegoede)
- Improve platform.checkBootRequest() mdarray handling (hdegoede)
- Fix backtrace when trying to use LV for /boot (#562325) (hdegoede)
- Add lsusb to rescue mode stage2 (#562616) (hdegoede)
- No longer refer to instdata in attrSkipList. (clumens)
- Clarify which storage exceptions are bugs (#557928). (clumens)
- Merge branch 'no-instdata' (clumens)
- Fix partitioning help spelling (#562823). (clumens)
- Keep the end sector aligned when resizing partitions (#560647) (hdegoede)
- Write ARP=no to ifcfg file when VSWITCH=1 is set on s390x (#561926).
(dcantrell)
- Don't return the passphrase from hasKey. Should return a boolean. (dlehman)
- Fix splitting of error strings from program.log. (dlehman)
- Take advantage of default size for new partitions. (dlehman)
- Add a default size of 500MB for new partition requests. (dlehman)
- Remove check for MD_DEVNAME from udev_device_is_md. (#562024) (dlehman)
- Don't try to specify bitmap for RAID0 since mdadm doesn't allow it.
(#562023) (dlehman)
- Use 0 for a default max_req_size instead of None. (dlehman)
- Add missing methods to RescueInterface (pjones)
- Clean up imports in __main__. (clumens)
- Nothing uses InstallData anymore, so it can completely be removed.
(clumens)
- Last attribute out of InstallData, please turn out the lights. (clumens)
- Move firstboot into the Anaconda object. (clumens)
- Move bootloader into the Anaconda object. (clumens)
- Move escrowCertificates into the Storage object. (clumens)
- Move storage into the Anaconda class. (clumens)
- Move desktop to the Anaconda object. (clumens)
- Move timezone to the Anaconda object. (clumens)
- Move firewall into Anaconda. (clumens)
- Move users and security to the Anaconda object. (clumens)
- Move network to the Anaconda object. (clumens)
- Move keyboard to the Anaconda object. (clumens)
- Move instLanguage to the Anaconda object. (clumens)
- Move the writeKS and write methods from InstallData to Anaconda. (clumens)
- Move upgrade-related data to the Anaconda object. (clumens)
- Make a bunch of Anaconda attributes into properties. (clumens)
- Move instProgress to be an attribute on the InstallInterface. (clumens)
- Finally remove the x_already_set hack. (clumens)
- Move instClass to be an attribute on Anaconda. (clumens)
- Use anaconda.ksdata instead of anaconda.isKickstart. (clumens)
- Move ksdata to be an attribute on Anaconda. (clumens)
- Remove backend and other pointless attributes from InstallData. (clumens)
- Move the isHeadless attribute onto the Anaconda class. (clumens)
- Set displayMode on the anaconda object, then refer to that everywhere.
(clumens)
- Sort the attributes on class Anaconda for my future reference. (clumens)
- Install classes may no longer force text mode. (clumens)
- Add a Requires: for tigervnc-server (#561498). (clumens)
- Fix keymaps-override-ppc pickup in mk-images (#524235) (msivak)
- Fix typo in action sorting. Disklabels before partitions. (#560017)
(dlehman)
- Display ID_PATH for zFCP devices instead of looking for a WWID. (clumens)
- Fix a variety of filtering UI problems caused by switching models around.
(clumens)
- Add ID_SERIAL in as a backup in case there's no ID_SERIAL_SHORT. (clumens)
- Display ID_PATH instead of WWID for DASDs as well. (clumens)
- Rename the WWID column to Identifier. (clumens)
- Enforce maximum partition sizes. (#528276) (dlehman)
- Log commands as a string instead of as a list of strings. (dlehman)
- Strip off the timestamp from error output pulled from program.log.
(dlehman)
- Fix: execWithRedirect() logging stderr at wrong loglevel. (akozumpl)
- Fix: execWithCallback() not logging stderr. (akozumpl)
- Fix: ArithmeticError: Could not align to closest sector (#561278)
(hdegoede)
- Fixed parsing of strings with multiple values in pyudev (mgracik)
- On text kickstart installs, doBasePackageSelect still needs to run
(#559593). (clumens)
- Remove unused udev_parse_block_entry() function (hdegoede)
- Fixed the problem with string to list properties (#560262) (mgracik)
- Add mpath device to selection instead of its constituents. (pjones)
- Make all StorageDevice-s support .vendor and .model (pjones)
- Add a parser for 'multipath -d' output. (pjones)
- Multipath members should not be added to the ignored disk list. (pjones)
- Add udev accessor for ID_MODEL_FROM_DATABASE/ID_MODEL. (pjones)
- Add udev_device_get_multipath_name(). (pjones)
- Use mpath names instead of serials to group them. (pjones)
- Add an exception to use when multipath fails. (pjones)
- Add missing log_method_call()s. (pjones)
- Introduces rsylogd to anaconda (part of #524980) (akozumpl)
- Fix compile problem from 65a3c05. (akozumpl)
- Remove unnecessary free from the rpmextract error handler (msivak)
- Fix SIGSEGV in dlabel feature (#556390) (msivak)
- Support ignore all/reinit all on the disk reinitialization question
(#512011). (clumens)
- Handle reboot better on s390 (#533198) (dcantrell)
- Reset network setting input counters for IPv4 and IPv6 (#553761).
(dcantrell)
- Fix reading dasd status sysfs attribute (#536803). (dcantrell)
- Fix whitespace error that was introduced. (pjones)
- setStage2LocFromCmdline() shouldn't strdup so much. (pjones)
- s390 CHPID types must be treated in hex for lookup table to work (#552844)
(maier)
- Fixed the setting of LD_LIBRARY_PATH in rescue (mgracik)
- Use StorageError insead of enumerating all the different storage errors.
(pjones)
- Get rid of "stage2param" in parseCmdLineFlags(); it is unused. (pjones)
- Make clearDisksWindow use device.model not device.partedDevice.model
(pjones)
- Include device-mapper-multipath in stage2.img (pjones)
- Load all scsi_dh_* modules, since they can't be modprobe by aliases...
(pjones)
- Display the first filter notebook page that has any disks on it. (clumens)
- The firmware and additional-web-server groups no longer exist (#555609).
(clumens)
- Fix a traceback adding RAID devices to the filtering UI. (clumens)
- reIPL code cleanup in loader (dcantrell)
- Show call depth with spaces in log_method_call() (pjones)
- iutil.execWithRedirect() hasn't used searchPath= since 2006. Take it out.
(pjones)
- Look for the SSH config file in /etc/ssh on s390 as well (#555691).
(clumens)
- Changed the architecture check from __ppc64__ to __powerpc64__ (#555669)
(mgracik)
- Fix the blkid infinite loop. (#555601) (msivak)
- Testing mode was removed. (rvykydal)
- There's no reason to keep bits of mkinitrd in upd-instroot. (pjones)
- Support the new excludedGroupList in pykickstart (#554717). (clumens)
- Use passed in anaconda parameter instead of relying on handler (hdegoede)
- kickstart.py: Fix stdoutLog not being defined (hdegoede)
- pylint error fixes round 2 (hdegoede)
- Fixup various errors detected by pylint (hdegoede)
- mdraid: various changes to options for new mdraid array creation (hdegoede)
- Emit a dracut setup string for the root device itself (hdegoede)
- Fix path mistakes in dasd_settle() in loader/linuxrc.s390 (dcantrell)
- Do not write HWADDR to ifcfg file on s390x for OSA Layer 2 (#546005)
(dcantrell)
- Poll DASD status for 'online' or 'unformatted' (#536803) (dcantrell)
- Add back hald for Xorg input device queries (#553780) (dcantrell)
- Support moving multiple rows at once in the cleardisks UI. (clumens)
- Allow disks in the filter and cleardisks UIs to be selected via
double-click. (clumens)
- Don't log the big parted.Partition string every time we do a flag op.
(dlehman)
- Check for disklabels on unpartitionable devices. (#539482) (dlehman)
- Make partitioned attr depend on whether the device is partitionable.
(dlehman)
- Make sure to clear partitions before destroying a disklabel. (dlehman)
- Raise an exception when /etc/fstab contradicts detected fs type (#536906)
(dlehman)
- Don't include read-only filesystems in fsFreeSpace. (#540525) (dlehman)
- NTFS filesystems are not really modifiable in any real sense. Admit it.
(dlehman)
- fstat->st_size is a long unsigned int, not a long long unsigned int.
(dcantrell)
- Use libarchive and rpm pkg-config files during build. (dcantrell)
- Take ignoredDisks into account on the filter screen as well. (clumens)
- Don't wait on the filtertype screen on kickstart installs. (clumens)
- Our overridden AutoPart class must be mentioned in commandMap. (clumens)
- Reword filter UI introductory text to be less confusing. (clumens)
- Install the driver discs according to what was loaded in stage1 (msivak)
- Use the updated DriverDisc code in loader (msivak)
- Backport the RHEL5 DriverDisc functionality (msivak)
- Include depmod in stage1 and set it to prefer the DD directory (msivak)
- Add a function to get paths to loaded modules (msivak)
- Add rpm extraction routines (use librpm and libarchive) (msivak)
- Add DriverDisc v3 documentation (msivak)
- When displaying the filter UI, check devices that are in exclusiveDisks.
(clumens)
- get rid of global import of anaconda_log (akozumpl)
- introduce loglevel flag and use it in yum's tty3 logging (akozumpl)
- Remove LoggerClass but maintain loglevel= functionality (akozumpl)
- Do not duplicate exclusiveDisks when going back to filtering UI. (rvykydal)
- Fixes problems in the manual network configuration screen in loader with
IPv6. (akozumpl)
- Bring back missing IPv6 pieces that were lost in time. (dcantrell)
- Add configuration option to enable/disable IPv6 support. (dcantrell)
- Ask about LVM inconsistencies only in storageinit step. (rvykydal)
- Ask about disk initialization only in storageinit step. (rvykydal)
- Fix partition request sorting based on number of allowed disks. (#540869)
(dlehman)
- Use the per-disk flag to disable cylinder alignment for msdos disklabels.
(dlehman)
- Don't include advanced devices in the total count on the basic filter UI.
(clumens)
- For iSCSI devices, put the path into the UI instead of a WWID. (clumens)
- Add udev_device_get_path. (clumens)
- Make Callbacks._update_size_label callable from outside the object.
(clumens)
- Do not show the "Add Advanced" button on the basic filtering screen.
(clumens)
- Log into program.log through the standard python logging (part of
#524980). (akozumpl)
- Fix typo from commit 13022cc2. (dlehman)
- Restore accidentally removed line in backend.py (hdegoede)
- yuminstall: Fix indentation error (hdegoede)
- No need to special case ignoring of dmraid sets (hdegoede)
- Ignore merge commit messages when generating the rpm changelog. (dcantrell)
- Remove last references to hal. (dcantrell)
- Log calls to DiskLabel's commit and commitToDisk methods. (dlehman)
- Fix DiskLabel.status so it returns True, not self.partedDisk, when active.
(dlehman)
- Write /etc/dasd.conf to target system on s390 (#533833). (dcantrell)
- Latest dracut has new syntax for rd_DASD. (dcantrell)
- Handle case of not enough space in VG more gracefully. (#533797) (dlehman)
- Make sure partitioning-related drive lists are sorted properly. (#534065)
(dlehman)
- Remove the early kickstart processing pass (#532453). (clumens)
- Move all the important stuff out of the KickstartCommand.parse methods.
(clumens)
- These changes require a later version of pykickstart. (clumens)
- commandMap and dataMap are now updates to the existing dict. (clumens)
- Set a reference to the kickstart handler on BaseData objects. (clumens)
- Move exception setup to right after instdata is populated. (clumens)
- Leave one free logical block before each logical partition. (dlehman)
- Use Chunk's geometry attr to access the parted Geometry. (dlehman)
- Fix sorting of requests by mountpoint. It was backwards. (dlehman)
- Align logical partitions' start sector up one logical block for metadata.
(dlehman)
- Use parted.Device's sectorSize attr instead of physicalSectorSize.
(dlehman)
- Select partition layout based on potential for growth. (dlehman)
- Reimplement partition growing. (dlehman)
- Create and use a function to obtain a parted alignment for a disk.
(dlehman)
- Create and use a new function to create and add new partitions to disk.
(dlehman)
- Make and use a new function to remove non-existent partitions. (dlehman)
- Disable parted's cylinder alignment code. (dlehman)
- Use new functions for conversion between size and sector count. (dlehman)
- Consider whether a partition is growable when choosing free space.
(dlehman)
- Allocate fixed-size requests before growable requests. (dlehman)
- For the catch-all case, put the message into the UI, not the exn
(#536854). (clumens)
- Add a missing binary to KEEPFILES (#533237) (msivak)
- Set boot flag for /boot on mdraid 1 array too (#533533). (rvykydal)
- Report no media present for cpqarray controllers with no disks attached
(hdegoede)
- Honor existing RUNKS conf file variable on s390 (#513951). (dcantrell)
- Add "Hipersockets" to qeth NETTYPE description (#511962). (dcantrell)
- Set custom_icon to error for advanced storage dialog errors (hdegoede)
- When creating a new md array check we have enough members (#533027)
(hdegoede)
- Convert string.find calls into something modern (jkeating)
- rescue: Don't copy install.ing to /tmp when not enough RAM (#531304,
#529392) (jvonau)
- isys: remove stray debug printf (#533597) (hdegoede)
- Don't activate / de-activate dmraid sets on setup / teardown (hdegoede)
- Remove previous mdadm bug 523334 workaorund (hdegoede)
- Don't stop mdraid containers or their arrays (#532971) (hdegoede)
- Include the command line to put anaconda into debugger mode in history.
(pjones)
- Allow remote(ish) debugging. (pjones)
- Make sure /var/log/lastlog is there so we don't have ugly logs. (pjones)
- Correct modopts initialization in loader (take 2) (#531932). (dcantrell)
- Get rid of dead code, and fix gettimespecofday's math. (pjones)
- Don't exec without forking first when calling udevadm. (pjones)
- If init or loader exit unexpectedly, traceback. (pjones)
- Fix the vim magic in this file to work. (pjones)
- Add handling for sshpw command. (pjones)
- Improve createLuserConf behavior and chroot behavior in users.* (pjones)
- Improve logging of ssh-keygen. (pjones)
- Remove tabs in "anaconda" (pjones)
- pidof is a symlink to killall5, so we need that as well. (pjones)
- Correctly initialize modopts in loader (#531932). (dcantrell)
- Increase the size of /boot a little bit (#530555). (clumens)
- Modify autopart requests to include a separate /home (#150670). (clumens)
- Take the spec's requiredSpace into account when creating LVs. (clumens)
- Add the PartSpec.__str__ method for debugging. (clumens)
- Trim the inital / off the mountpoint before making an LV name from it.
(clumens)
- Remove "anaconda" from attributes to skip (#532612, #532737). (clumens)
- Fix status for and consolidate handling of '-' in vg/lv names. (#527302)
(dlehman)
- Rename "setupShellEnvironment" to "setupSshd". That's all it does.
(pjones)
- Put "killall -USR2 anaconda" in a pre-populated history. (pjones)
- Only try to split proxy commands out if there's actually one specified.
(pjones)
- Consolidate the parsing of nfs: locations for ks= and stage2= (#529197)
(stijn)
- Copy cio_ignore kernel parameter to zipl.conf on s390 (#475675).
(dcantrell)
- Do not modify /etc/hosts from setup package (#530343). (dcantrell)
- In execWithCallback(), support disabling stdout echo (#528386) (dcantrell)
- Select drives in partition dialog, preserving settings. (#529931) (dlehman)
- Clear pot and po updates after a 'make release' or 'make archive'.
(dcantrell)
- Use the new anaconda image in fedora-logos (#529267). (jkeating)
- Call udev_trigger with a "change" action and don't filter out dm devices.
(dlehman)
- Remove unused attr_nomatch keyword argument from baseudev.udev_trigger.
(dlehman)
- Fix logging of isys mount/umount into program.log. (rvykydal)
- Fix "resize failed: 1" errors for ext2/ext3/ext4 (#517491). (dcantrell)
- Log why we're exiting the installer in storage.DASD.startup() (dcantrell)
- Improve detailedMessageWindow() in text.py. (dcantrell)
- Use 'zerombr' kickstart command for DASDs needing dasdfmt (#528386).
(dcantrell)
- Add 'zerombr' to list of early kickstart commands we look for. (dcantrell)
- Remove extra echo in 'make rpmlog'. (dcantrell)
- Do not traceback if network device doesn't have HwAddress property
(#506013). (rvykydal)
- Fix liveinst to (1) not unmount /dev/pts, (2) unmount in order (509632).
(clumens)
- Do not read DASD data from /tmp/install.cfg in booty (#526354). (dcantrell)
- Merge branch 'master' of ssh://git.fedoraproject.org/git/anaconda (notting)
- Support upgrading when the language isn't in lang-table (#528317).
(clumens)
- Fix task selection when tasks contain the same group. (#528193) (notting)
- Update drivelist with bootloader --driveorder ks option instead of
replacing it (#506073). (rvykydal)
- Use ID_SERIAL to write multipath.conf, but ID_SERIAL_SHORT for UI. (pjones)
- Don't run 70-anaconda.rules on an installed system (#527781). (clumens)
- Handle Installation Repo (base repo) as any other in repo edit UI.
(rvykydal)
- Fix methodstr editing dialog. (rvykydal)
- Store methodstr url of repo (#502208, #526022). (rvykydal)
- Show user of which repository he edits the url (methodstr editing).
(rvykydal)
- Don't traceback with malformed repo= nfs: parameter. (rvykydal)
- Missing volume_key shouldn't break LUKS support completely. (#526899)
(dlehman)
- Write multipathd.conf in anaconda so that dracut can find it. (pjones)
- We moved from dialog to newt.. (#528497) (msivak)
- Fix a segfault when stage2= boot parameter and kickstart url method is
used (#524417). (rvykydal)
- Fix parsing of optional portnr in iscsi target IP (#525118) (hdegoede)
- Reset PartitionDevice attributes after failed edit. (#498026) (dlehman)
- Add MultipathDevice.getDMNode(), because .updateSysfsPath() needs it.
(pjones)
- Add MultipathDevice.updateSysfsPath() (pjones)
- Run implantisomd5 on boot.iso on x86. (bz#526902) (pjones)
- Consider encryption when checking for duplicate mountpoint. (#526697)
(dlehman)
- Fix grub stage1 installation for /boot on md raid1. (rvykydal)
- Do not show the VNC-over-text question, when there is not enough memory
for GUI (#527979) (msivak)
- Fix filtering out of 'Sending translation for' log messages in bumpver.
(rvykydal)
- Use addUdevPartitionDevice() for adding dmraid / multipath partitions
(#527785) (hdegoede)
- Set partedPartition system to the correct FS when creating an FS (hdegoede)
- Reset parted flags in createFormat not destroyFormat (hdegoede)
- Default to mbr bootloader target for mdraid 1 boot device too (#526822).
(rvykydal)
- Clear out state before calling XkbGetState. (clumens)
- Override fstabSpec in PartitionDevice for by-path DASD (#526364). (dcantrell)
- Create DASDDevice objects for DASD devices when building devicetree.
(dcantrell)
- Add udev_device_is_dasd() to detect DASD devices. (dcantrell)
- Change existing call to deviceNameToDiskByPath(). (dcantrell)
- Make storage.devices.deviceNameToDiskByPath() more robust. (dcantrell)
- Do not copy over 70-persistent.rules if instPath is '' (#527707) (dcantrell)
- Filter out 'Sending translation for' log messages in bumpver. (dcantrell)
- Don't copy _raidSet, but merely pass around a reference (hdegoede)
- Action...Format setup device before modifying the partition table (hdegoede)
- map() -> filter() in storage.writeEscrowPackets() (dcantrell)
- lokkit has moved to a subpackage, so require that (#523709). (clumens)
- Stop trying to run xrandr (#527678). (clumens)
- Only initialize escrow packet code if there's devices that need it (#527668).
(clumens)
- On lookup of a PartedDevice also check for _ped.DeviceException (#527699)
(hdegoede)
- Set related ayum attributes if media is found when editing methodstr
(#515441). (rvykydal)
- In repo editing UI do not use object we are creating (#515441). (rvykydal)
- Tell udev to ignore temporary cryptsetup devices. (#526699) (dlehman)
- Have redhat.exec reference generic.prm, not redhat.parm (dcantrell)
- Bring back cio_ignore=all, !0.0.0009 for generic.prm on s390x (#463544)
(dcantrell)
- Take 70-persistent-net.rules generated at installation (#526322)
(dcantrell)
- Use $LIBDIR to find the boot-wrapper file. (jkeating)
- formatByDefault: Don't traceback when mountpoint is None (#522609)
(hdegoede)
- Don't warn /usr should be formatted when "Format as:" is already selected
(hdegoede)
- Bring up network interface before trying to use it for FCoE (hdegoede)
- DMRaidArray: Don't report no media present when in teared down state
(hdegoede)
- Wait for udev to settle before trying to find dmraid sets in udev DB
(hdegoede)
- Implement the double click for free space on the bar view (jgranado)
- Pass only cCB and dcCB to the StripeGraph classes. (jgranado)
- React to a double click on a "free row" in the tree view. (jgranado)
- Create getCurrentDeviceParent function. (jgranado)
- Make sure we don't exceed the 80 character threshold (jgranado)
- Display an LVM graph on the bar view when we click on the VG's free space
(jgranado)
- Add a free row in the LVM tree view when necessary. (jgranado)
- Reorganize the tree view related to lvm. (jgranado)
- Remove unneeded variable (jgranado)
- Remove an errant popd. Probably cut/paste error. (jkeating)
- Only add the .img file to .treeinfo if it exists. (jkeating)
- Make the netboot dir before trying to use it (jkeating)
- Only write network --netmask if one has been defined (#527083). (clumens)
- Add --label to anaconda-ks.cfg if needed (#526223). (clumens)
- Fix existing size calculation for NTFS (#520627) (dcantrell)
- Write label to filesystem if we have one set (#526226, #526242) (dcantrell)
- Add wget to the initrd, which is required for rhts. (clumens)
- Fix the check for no /boot request on PPC yet again (#526843). (clumens)
- Surround the stage2= parameter in quotes for RHEL (#526863). (clumens)
- Correct makeupdates script to work with deleted files. (jgranado)
- Stop dragging mkinitrd into the install (hdegoede)
- Add --keyword=P_ to xgettext command arguments. (dcantrell)
- Use named parameters for translatable strings with multiple params.
(dcantrell)
- Change 'support' to 'supported' in UnknownSwapError dialog (#526549)
(dcantrell)
- Force interface up before checking link status (#525071). (dcantrell)
- Only ignore partitions <1MB that are freespace. (#526445) (dlehman)
- Try to include error messages in lvm/mdadm exceptions. (dlehman)
- Add the create LV option. (jgranado)
- Give the proper orientation to the gtk objects. (jgranado)
- Show the information message when user hits a non-bar element. (jgranado)
- Control the sensitivity of the "delete" and "create" buttons (jgranado)
- Respond to double click on a VG, LV and RAID device. (jgranado)
- Remove the "Hide RAID/LVM" checkbox. (jgranado)
- Display a message in the bar view when user has no selected items.
(jgranado)
- Cosmetic changes. (jgranado)
- The StripeGraph class does not need tree nor editCB (jgranado)
- Restrain from outputing any digits after the decimal point. (jgranado)
- Add a slice when the extended partition contains "free space" (jgranado)
- Reduce message size in clone screen. (jgranado)
- Add Slice size to the bar view (jgranado)
- Select the device in the treeview when its selected in the barview.
(jgranado)
- Make canvas a class method. (jgranado)
- Incorporate all the Graph types in the custom screen. (jgranado)
- Add the Volume Group and md RAID array Graph classes (jgranado)
- Make the Bar View Code generic. (jgranado)
- Pass the device instead of the name to the add funciton. (jgranado)
- Display the device path with a smaller font and different color. (jgranado)
- Display bar view for the selected device only. (jgranado)
- Fix indentation in editCB (jgranado)
- Organize the creation of the custom screen into sections. (jgranado)
- Use a checkmark from a PNG image instead of a string. (jgranado)
- Put the size after the device name in the storage tree. (jgranado)
- Add the warning message for an invalid create. (jgranado)
- Reorganize the Customization screen a little. (jgranado)
- Remove unneeded functions & add the about messages for LVM and RAID.
(jgranado)
- Have an intermediary screen for the "Create" action. (jgranado)
- New screen for "Create" action. (jgranado)
- New function to tell us if there is free space for a new partition.
(jgranado)
- Edit LVM LV when user has a LV selected. (jgranado)
- Don't fail to commit partitions due to active lvm/md. (dlehman)
- Create and use DiskLabelCommitError for failure to commit. (dlehman)
- Work around partition renumbering in processActions. (dlehman)
- Re-get preexisting partitions using their original path. (dlehman)
- Don't store a copy of ActionDestroyFormat's device attr. (dlehman)
- Don't retry commiting partition table to disk (hdegoede)
- Stop /lib/udev/rules.d/65-md-incremental.rules from messing with mdraid
sets (hdegoede)
- Don't try to do format handling on drives without media (#523467)
(hdegoede)
- Wait for mdraid arrays to become clean before reboot / halt (hdegoede)
- Add repo --proxy= support to kickstart. (clumens)
- Pass the proxy config information to stage2. (clumens)
- Add support for proxies to the command line. (clumens)
- Add proxy support to kickstart in the loader. (clumens)
- Add a function to split up a proxy parameter into its parts. (clumens)
- libcurl supports https in addition to http, so change our tests. (clumens)
- getHostAndPath is only used by the nfs code, so move it. (clumens)
- Add initial loader UI support for proxies (#125917, #484788, #499085).
(clumens)
- We no longer need our own FTP/HTTP protocol support code. (clumens)
- Get rid of the convertURL/UI functions, make iurlinfo just store a string.
(clumens)
- Convert urlinstall.c to using the new urlinstTransfer function. (clumens)
- Add proxy support to urlinstTransfer by setting more curl options.
(clumens)
- Add the urlinstTransfer function, which replaces urlinst*Transfer.
(clumens)
- Add a function to construct an array of HTTP headers and cache the result.
(clumens)
- Add a CURL instance to the loader data. (clumens)
- Add checks for libcurl into the makefile process. (clumens)
- Add the packages needed to support libcurl. (clumens)
- Improve loader messages in parseCmdLineFlags when passing vnc (#526350).
(maier)
- Update po/anaconda.pot during a 'bumpver' run. (dcantrell)
- Add 'make release' as a synonym for 'make archive'. (dcantrell)
- Whitespace cleanup in loader/net.c. (dcantrell)
- Clean up getHostandPath() debugging messages for host & file. (dcantrell)
- Need an extra on the PS1 line in /.profile (dcantrell)
- Korean font package name changed (#525597) (dcantrell)
- We can't prompt for new network info in cmdline mode (#526262). (clumens)
- yaboot supports /boot on ext4 (#526219). (clumens)
- bootloader --append= should append, not set the args list (#524004).
(clumens)
- Don't check if /boot is under the 4MB mark on i/p Series (#526200).
(clumens)
- "minimal" has been renamed to "core" (#526191). (clumens)
- Remove some unused isys methods. (clumens)
- Make sure the disk holding /boot is setup before setting boot flag
(#526063) (hdegoede)
- Use temporary repo id for edited object to prevent Duplicate Repo error
(#524599). (rvykydal)
- Do not delete repo twice or when it had not been added actually (#524599).
(rvykydal)
- Disable repo before deleting it (#524599). (rvykydal)
- Log more, repo editing UI. (rvykydal)
- Make _enableRepo a little more readable. (rvykydal)
- Move S390MODS to inside makeBootImages(), remove libiscsi_tcp. (dcantrell)
- Require the latest and greatest python-meh. (clumens)
- Add a stub enableNetwork method for cmdline mode (#525779). (clumens)
- Adapt to python-meh passing a bug description around. (clumens)
- Return None for next part type if all primary slots full. (#524859)
(dlehman)
- Make sure the Minimal group is selected by default on RHEL installs
(#524561). (clumens)
- Updated po/anaconda.pot (dcantrell)
- Remove ui/instkey.glade.h from po/POTFILES.in (dcantrell)
* Tue Sep 22 2009 David Cantrell <dcantrell@redhat.com> - 12.28-1
- Preserve whitespace in $CDLABEL in mk-images.x86 (dcantrell)
- Modify rhel.py installclass for current RHEL development efforts.
(dcantrell)
- Add --brand switch support to buildinstall script. (dcantrell)
- Remove the installation number screen. (clumens)
- Remove kickstart-docs.txt, since it comes with pykickstart (#515168).
(clumens)
- ybin, mkofboot, and ofpath moved from /usr/sbin to /sbin (#524608).
(clumens)
- Honor ignoredisk --only-use. (#514353) (dlehman)
- Make sure user-selected mountpoint is not already in use. (#524584)
(dlehman)
- Do not raise UI dialog in stage2 if network is set in ks (#487503).
(rvykydal)
- Use whiptail instead of dialog in rescue mode, supports serial line better
and looks nicer (msivak)
- Require at least system-config-keyboard 1.3.1 or higher. (dcantrell)
- Fixes for rhel installclass. (dcantrell)
- Start with all modules from kernel/drivers/s390 on s390x (#524566)
(dcantrell)
- Do not require dhcpv6-client, package is now obsolete. (dcantrell)
- Take into account snapshots and mirrored volumes in lvm dialogs. (dlehman)
- Add handling for snapshot and mirrored logical volumes to DeviceTree.
(dlehman)
- Add attrs to LVMLogicalVolumeDevice class for snapshots and mirrored lvs.
(dlehman)
- Add function lvorigin to determine the name of a snapshot's origin lv.
(dlehman)
- Add function udev_device_get_lv_attr to retrieve lv attribute strings.
(dlehman)
- Include hidden volumes and lv attributes in udev db. (dlehman)
- Add 'install' user to start anaconda on s390x. (dcantrell)
- Set a default shell prompt for s390x installs. (dcantrell)
- Do not assume we found a module in addOption() in loader/modules.c
(dcantrell)
- Do not try to load floppy, edd, pcspkr, or iscsi_ibft on s390x. (dcantrell)
- Handle Esc keypress in (some more) dialogs as Cancel - (#520110).
(rvykydal)
- All the nss libraries have moved from /lib to /usr/lib (#524410). (clumens)
- Add python-nss as a requirement (#524307, #524313). (clumens)
- Call $LDSO --verify for the binary file -inside- the chroot. This fixes
building x86 boot images on a x86_64 host system. (thomas.jarosch)
- Just grab everything in a /usr/share/fonts/lohit* directory (#523906).
(clumens)
- Don't write an empty mdadm.conf (hdegoede)
- Write mdraid arrays to mdadm.conf in sorted order (hdegoede)
- containers and their sets must only have a UUID= parameter in mdamd.conf
(hdegoede)
- Updated anaconda.pot file. (dcantrell)
- NetworkManagerSystemSettings.service no longer exists. (jkeating)
- udevsettle is no longer used (udevadm settle is called instead) so don't
put it in images. (jkeating)
- nm-system-settings is no longer shipped. (jkeating)
- Port from PolicyKit to polkit (jkeating)
- Keep po/anaconda.pot in the source tree (#522072) (dcantrell)
- Do not show Unknown as filesystem type for free space. (dcantrell)
- Catch failures from write(2) in utils/snarffont.c (dcantrell)
- Don't leak fds (#520154) (jgranado)
- Initialize the opts variable. (jgranado)
- Add the help messages for the new options of makeupdates script. (jgranado)
- Revert "The Madan font should no longer be used (apparently). (#523906)."
(clumens)
- Fix going back from hd install UI when stage2 is given as boot param
(#519206). (rvykydal)
- The Madan font should no longer be used (apparently). (#523906). (clumens)
- Update the pykickstart requirement to reflect the escrow stuff. (clumens)
- add requires for sparc arches on elftoaout and piggyback we need them to
make the tftp image (dennis)
- copy the sparc boot loader on all sparc arches (dennis)
- make sure we include sparc boot loaders on all sparc arches (dennis)
- make sure we get the sparc64 kernel on sparc (dennis)
- Check whatever contains /boot on PPC as well as the bootable part
(#523747). (clumens)
- make a call to rpmutils to get the basearch works on all arches that dont
have anaconda built on the basearch (dennis)
- s-c-keyboard is now provided on all architectures (#523445). (clumens)
- Use pyblock for device-mapper devices' status. (dlehman)
- load_policy has moved from /usr/sbin to /sbin (#523506). (clumens)
- Collect all modules from modules.{ccwmap|networking} on s390x (#522519)
(dcantrell)
- Copy cmsfscat from /usr/sbin, not /usr/bin. (dcantrell)
- Remove duplicate search_cu() in linuxrc.s390 (dcantrell)
- Try harder to stop mdraid arrays (hdegoede)
- Log when we are skipping disks without media (hdegoede)
- Don't scan stopped md devices (hdegoede)
- Make udev_get_block_device() return None on failure (hdegoede)
- Do not pass --update=super-minor to mdadm for containers and sets there in
(hdegoede)
- Write mdadm.conf lines for mdraid container formats (imsm) (hdegoede)
- Really put appended kernel cmdline arguments at the end (hdegoede)
- Install dracut-network when using network storage (hdegoede)
- Make recreateInitrd() generate a dracut initrd (hdegoede)
- Use type of device rather than name in booty target selection. (hdegoede)
- write netroot=fcoe:... to kernel cmdline in grub.conf for dracut (hdegoede)
- write ifname=eth#:MAC to kernel cmdline in grub.conf for dracut (hdegoede)
- write iscsi initiator name to kernel cmdline in grub.conf for dracut
(hdegoede)
- Make iswmd the default (hdegoede)
- Use new icons in anaconda so we don't look so dated (#515601). (clumens)
- Prevent infinite loop in doClearPartitionedDevice. (dlehman)
- Rename doDeleteDependentDevices to doClearPartitionedDevice for clarity.
(dlehman)
- Handle Esc keypress in dialogs as Cancel (#520110). (rvykydal)
- Don't use baseurl containing space in yum repo object (#516042). (rvykydal)
- Add escrow support (mitr)
- Add python-{nss,volume_key} to stage2, volume_key to rescue (mitr)
- Update for pykickstart with escrow support (mitr)
- Fix --encrypted when creating volumes in kickstart (mitr)
- Remove the "Remove dmraid Device" button, which isn't even hooked up.
(clumens)
- Require the right version of system-config-date (#523107). (clumens)
- Fix setting of "Add repository" dialog title. (rvykydal)
- Update state and name of repository in list after editing. (rvykydal)
- Fix busy cursor in repo editing (#518529) (rvykydal)
- Fix busy cursor stack popping when creating formats (#518529). (rvykydal)
- Remove partitions in reverse order when clearing disks. (dlehman)
- Improve the info provided to DeviceAction.__str__. (dlehman)
- Include device id in log lines since partitions can get renumbered.
(dlehman)
- Don't try to preserve old format attrs when reinitializing pvs. (dlehman)
- remove the no longer used initcb and initlabel DiskDevice.__init__
arguments (hdegoede)
- No longer require xfsdump, since anaconda doesn't use it anywhere
(#522180). (clumens)
- The zonetab module has moved (#521986). (clumens)
- No longer copy over the CD/DVD repodata or repo config file (#521358).
(clumens)
- language dracut kernel cmdline should be space seperated (#521113)
(hdegoede)
- Require python-meh (#521661) (dcantrell)
- Handle UnknownSwapError when turning on existing swap volumes. (dcantrell)
- Check for a valid interface in swapErrorDialog, exit without one.
(dcantrell)
- On SuspendError, allow users to skip/format/exit like OldSwapError.
(dcantrell)
- Raise exception if detected swap volumes are not Linux v1 swap space.
(dcantrell)
- Handle OldSwapError (#510817) (dcantrell)
- Support a force=True argument on SwapSpace.create() (dcantrell)
- Skip all Makefiles and the liveinst subdirectory in 'make updates'
(dcantrell)
- Make anaconda know its version number (#520061) (dcantrell)
- Add top back to the stage2 image. (clumens)
- Do not put device node path, but the fs UUID in fstab for mdraid:
(#519337) (hdegoede)
- Expose common fsset methods and properties in class Storage. (dcantrell)
- Don't display the warning about not enough memory on a VNC install
(#521109). (clumens)
- The vtoc.h header has moved from the kernel to s390utils (karsten,
#520830). (clumens)
- Rename mostlyclean-glade to mostlyclean-liveinst. (dcantrell)
- Handle rootPath referencing a chroot value or actual path (#519665)
(dcantrell)
- We convert cmdline args to longs in several places, so reduce to a
function. (clumens)
- Support rootpath overrides in fsset.rootDevice (#519665) (dcantrell)
- Pass anaconda.rootPath to FSSet() (dcantrell)
- Include ui, liveinst, and lang-table strings in po updates (#515411)
(dcantrell)
- Add some silent make support for sed, mkctype, and other commands.
(dcantrell)
- Recheck if a partition should be ignored after getting its disk (#518971)
(hdegoede)
- Fix traceback when editing a pre-existing logical volume (hdegoede)
- Do not traceback on an usb cardreader with no card present (hdegoede)
- Don't identify multi lun usb card readers as multipath (#517603) (hdegoede)
- Device class does not have a format member (hdegoede)
- Device class does not have a path member (hdegoede)
- Simplify language.py to two basic settings, and a lot of support
(#517569). (clumens)
- clobber is a method of PartedDevice not PartedDisk (hdegoede)
- Remove unused fsFromConfig method (hdegoede)
- allocatePartitions: PartitionCount is a member of PartedDisk not
DiskDevice (hdegoede)
- New version. (clumens)
- Fix storage/__init__.py:1857: non-keyword arg after keyword arg (hdegoede)
- Remove a bunch of unnecessary semicolons (hdegoede)
- pylint does not like )
- Fix 55:udev_resolve_devspec: Using possibly undefined loop variable 'dev'
(hdegoede)
- MDRaidArrayDevice.totalDevices is a read only property so don't write it
(hdegoede)
- storage/__init__.py:471:Storage.exceptionDisks: Undefined variable 'udev'
(hdegoede)
- Append s390x packages to PACKAGES list, exclude /sbin/qetharp-2.4
(dcantrell)
- On kickstart installs, you can't select a different parttype
(#519137, #520058). (clumens)
- Don't try to create a primary partition if all slots are taken. (#519784)
(dlehman)
- Fix handling of locked preexisting LUKS devices. (#502310) (dlehman)
- Fix up handling of preexisting partitions. (dlehman)
- Pick up mountpoint set for protected partitions. (#498591) (dlehman)
- Ignore partitions belonging to disks we've reinitialized. (dlehman)
- Handle newly initialized disklabels whether via ks or prompt. (#519235)
(dlehman)
- Fix some indentation in the disklabel initialization block. (dlehman)
- Use commitToDisk() instead of commit() when only changing flags (hdegoede)
- Update PartitionDevice's partedPartition when the PartedDisks get reset
(hdegoede)
- Add --localscripts option to buildinstall. (dcantrell)
- Add missing dependencies for linuxrc.s390 and lsznet in mk-images
(dcantrell)
- Re-enable login of root user in initrd.img (dcantrell)
- Less log clutter with fixing ld64.so.1 symlink in instbin on s390x
(dcantrell)
- Fix typo in get_dso_deps() for searching /lib on s390x (dcantrell)
- Add hfsplus and netconsole kernel modules (#519756, #519785). (clumens)
- Adapt expandLangs to work with three character base lang names (#517770).
(clumens)
- Prevent resizes that would go past the end of the disk (#495520)
(dcantrell)
- correctly deactivate zFCP LUN on s390 (maier)
- correctly activate zFCP LUN on s390 (maier)
- prevent getting started up or shutdown again while already in such state
(maier)
- Remove unused reipl code in linuxrc.s390 (maier)
- Fix copying of shutdown to initrd.img in mk-images for s390x (#517888)
(maier)
- 64 bit sparc linux does not define __sparc64__ we need to use
"(defined(__sparc__) && defined(__arch64__))" fixes building 64 bit sparc
(dennis)
- make tftp images as small as possible. we have a 10mb hardware limitation
on there size (dennis)
- make sure we correctly make the sparc tftp image (dennis)
- make sure we have glibc.sparcv9 installed in sparc installers not
glibc.sparcv9v (dennis)
- add the sparc screen font (dennis)
- add the files for sparc boot config setup configure.ac to define IS_SPARC
(dennis)
- add mk-images.sparc script (dennis)
- add support for making sparc images (dennis)
- sparc no longer needs and special keyboard handling. it uses the standard
api's interfaces (dennis)
- setup termcap for sparc (dennis)
- Close %packages with a %end (#518063) (katzj)
- Call udev_settle from DiskLabel.commit to ensure it happens. (dlehman)
- Fix traceback in text mode upgrade. (#505435) (dlehman)
- Don't traceback if Delete button is hit when no device is selected.
(dlehman)
- Clean up management of extended partitions we create. (#497293) (dlehman)
- Don't use StorageDevice for partitions w/ biosraid formatting. (#504002)
(dlehman)
- Don't try to get the size of fstypes w/ no infofsProg defined. (dlehman)
- Change all disklabel manipulations to use the DiskLabel format class.
(dlehman)
- Create a DiskLabel format class for partition tables. (dlehman)
- Add support for specifying a tag to makeupdates. (dlehman)
- Include changed files from the top level in the updates. (dlehman)
- If asked, put the system SN (as given by dmidecode) into an HTTP header.
(clumens)
- Add dmidecode to the initrd. (clumens)
- Add the kssendsn parameter and corresponding flag. (clumens)
- Don't keep testing if we're doing URL_METHOD_HTTP. (clumens)
- Later pyparted will define DEVICE_DM, so change the test to use it.
(clumens)
- Use the new GTK Tooltip API (#517389). (clumens)
- Fix a typo in a kickstart error string (#517760). (clumens)
- Be sure we have a sorted list of mountpoints for live mangling (#504986)
(katzj)
- Fix askmethod to work with stage= being specified (#516973) (katzj)
- Fix ordering on device list returned from identifyMultipaths() (pjones)
- Fix typo in mpath support. (pjones)
- Correctly inform the user once about obsolete parm/conf file options on
s390 (maier)
- Handle activation of DASDs in linuxrc.s390 since loader no longer works
(maier)
- make IPv4 configuration in linuxrc.s390 compatible with NM in loader
(maier)
- suggest disabled X11-forwarding for ssh login in linuxrc.s390 (maier)
- Fix an erroneous "!" in the test for doKill, and make reboot explicit.
(pjones)
- Honor network config boot params for CD-booted ks installs (#433214)
(dcantrell)
- Include ipcalc command in all initrd.img files, not just s390 (#516084)
(dcantrell)
- Don't to unmount /mnt/source unless something's mounted there (#516304).
(clumens)
- Honor nodmraid commandline option (#499733) (hdegoede)
- Don't try to multipath CD devices. (#516362) (pjones)
- booty: Do not strip the trailing p from a devicename like
mapper/isw_Vol0_tmp (hdegoede)
- booty: isw_Vol0_Stripe is not a disk isw_Vol0_Stri with an e part
(#505205) (hdegoede)
- Avoid finding the word 'engine' in comments. (jkeating)
- Don't try to get dso deps of statically linked files. (jkeating)
- Call shutDown() correctly for s390 (karsten)
- Remove unused variable from loader/loader.c (karsten)
- Delete unpackaged files on non-livearches. (karsten)
- Do not set parted.PARTITION_BOOTABLE on s390. (root)
- Complete udev setup in linuxrc.s390 for automatic module loading (root)
- Recognize mpath devices when we see them. (pjones)
- Make DiskDevice.partedDisk a property. (pjones)
- Make questionInitializeDisk() somewhat less ugly. (pjones)
- Add a description to DiskDevice, and use it in the UI. (pjones)
- Get rid of Device.description, it is unused. (pjones)
- Close the opened file descriptors when necessary. (#499854) (jgranado)
- Add the glade files to the install image so save-to-bugzilla works
(#515444). (clumens)
- New system-config-keyboard has a different version then I expected
(hdegoede)
- Add scripts/makeupdates to generate updates.img files. (dcantrell)
- Add python-decorator to the stage2 image for pyparted (#513175). (clumens)
- Set stage2= on x86 boot.iso (katzj)
- Try to auto-find the CD even if stage2= is specified (katzj)
- Make sure we have a device before check if it's protected. (#510033)
(dlehman)
- Remove unresolvable file devices from the devicetree. (#503830) (dlehman)
- Support multiple fstab entries of a single nodev fstype. (#505969)
(dlehman)
- Refer to nodev devices as "none", not "nodev". (dlehman)
- Change DeviceTree.devices from a dict to a list. (dlehman)
- Show locked LUKS devices as "Encrypted (LUKS)", not "LUKS". (dlehman)
- Allow creation of four primary partitions on a disk. (#505269) (dlehman)
- Add a bunch more stuff to the initrd needed for networking. (clumens)
- Add more things to /sbin on the initrd that udev requires. (clumens)
- Add dmesg to the images. (clumens)
- Set GECOS field for new user accounts specific in ks files (dcantrell)
- Show MAC address of network device in text mode too. (rvykydal)
- Fix selection of alternative iface in UI after fail (#507084). (rvykydal)
- Stop the cdrom device before ejecting (#505067) (msivak)
- Add hipersockets to NETTYPE description (bhinson, #511962). (clumens)
- Don't show formatting progress bar after mkfs has exited. (eric_kerin)
- Run firstaidkit-qs script instead of the shell (shows rescue menu)
(#508512) Add dialog package required for firstaidkit Create /etc/fstab in
ramdisk to make mount commands easier (#440327) (msivak)
- When ignoring partitions make sure lvm also ignores them (hdegoede)
- 70-anaconda.rules: pass --ignorelockingfailure to lvm invocation (hdegoede)
- Call mdadm -I with --no-degraded for all disks but the last (hdegoede)
- There is no /bin on the initrd so sleep needs to go into /sbin. (clumens)
- Add deviceNameToDiskByPath(). (dcantrell)
- Display drive model and size in MB in partitioning UI (#460697) (dcantrell)
- Lots of small grammar and wording changes. (pjones)
- Edit user-visible dialogs for style. (pjones)
- Get rid of sloppy elipses usage. (pjones)
- Don't write optical devices to /etc/fstab (#505697). (clumens)
- error messages of zFCP on s390: log or pass to the UI (maier)
- correctly delete a SCSI device provided by a zFCP LUN on s390 (maier)
- All other teardown methods take a "recursive" argument (#506166). (clumens)
- Clean yum caches following preupgrade, too (#503096). (clumens)
- mdmon added to install.img (Jacek.Danecki)
- Remove some unnecessary code. (clumens)
- Use a method yum provides, rather than inventing our own. (clumens)
- Remove _catchallCategory. yum handles this for us now. (clumens)
- Write out NM_CONTROLLED=no for NICs used for FCoE (hdegoede)
- Add support for biosraid using mdadm (hdegoede)
- Reverse: "Support for MD containers" (hdegoede)
- When all udev_is-foo() checks fail return instead of backtracing (hdegoede)
- 70-anaconda.rules: always import blkid output (hdegoede)
- Make sure to have "self" as an argument. (clumens)
- Add kickstart fcoe command (hdegoede)
- Use the yum preconf object to do $releasever substitution. (clumens)
- Indicate LV status according to lv_attr active bit (#491754) (dcantrell)
- Include lv_attr in lvm.lvs() return value. (dcantrell)
- Fix list of 64-bit arches. (notting)
- We also need -DUSESELINUX if we want to call matchPathContext. (clumens)
- Clean up some arch code. (notting)
- Update /etc/hosts with hostname for loopback IP address (#506384)
(rvykydal)
- Add missing LAYER2 and PORTNO handling for s390x. (dcantrell)
- Ignore configure.ac when generating updates.img (dcantrell)
- AC_ARG_WITH -> AC_ARG_ENABLE (dcantrell)
- dhclient now reads config files from /etc/dhcp (dcantrell)
- no "rhgb quiet" on s390 to enable visible boot progress and system
automation (#509881) (maier)
- fix backtrace in s390 reipl support due to missing anaconda.id.fsset
(#509877) (maier)
- Put sleep in /bin on the initrd (#505639). (clumens)
- Also include the grep programs. (clumens)
- Add programs from vim-minimal, coreutils, and util-linux-ng. (clumens)
- Move programs that aren't s390-specific into the main image. (clumens)
- Look for /bin/sh, not /sbin/busybox. (clumens)
- No longer symlink binaries to busybox. (clumens)
- No longer require busybox. (clumens)
- LVMVolumeGroupDevice stores pesize in MB, kickstart expects it in KB.
(dlehman)
- Don't schedule a format resize if reformat scheduled. (#500991) (dlehman)
- Deactivate md arrays regardless of state if the device is present.
(#496441) (dlehman)
- Lame hack to make sure --size= is never 0 (#500905). (clumens)
- Don't filter out partitions that haven't been allocated (#500932).
(clumens)
- Write out PE size as an integer, since that's what anaconda wants
(#501049). (clumens)
- Set clearPartType to None on preupgrade too (#499321). (clumens)
- Fix indentation of line to remove cancelled actions from the list.
(#500932) (dlehman)
- Consider active-idle state of md device as accepatable status of device
(#497407) (rvykydal)
- Fix detection of cciss disks (#499408) (dchapman)
- Get existing fs size for xfs. (dcantrell)
- Get existing fs size for ntfs. (dcantrell)
- Get existing fs size for jfs. (dcantrell)
- Get existing fs size for ext2, ext3, and ext4. (dcantrell)
- Compute existing filesystem size using fs info utility. (dcantrell)
- Do not allow users to migrate ext4 to ext4. (dcantrell)
- Correct handling of formats on encrypted preexisting LVs. (#499828)
(dlehman)
- Ignore unrecognized device-mapper devices we find. (#499967) (dlehman)
- loader: Mount /tmp as tmpfs not ramfs so we can swap it out (ajax)
- format.mountpoint -> lvd.mountpoint (#500913). (clumens)
- Treat the loop labels as devices without a label.(#493219) (jgranado)
- Add the partition table partition after initializing (#498602). (clumens)
- Add a Mac OS boot line to yaboot.conf (#499964). (clumens)
- Catch IOError when enabling repos (#500439). (clumens)
- Use a newer version of the kickstart Partition command. (clumens)
- Fix a traceback when installing over previous installs on PPC (#499963).
(clumens)
- Fix a typo when probing exception disks. (clumens)
- Add support for --noformat too. (clumens)
- Add support for --onpart, --ondrive, and --useexisting. (clumens)
- Make the storage.writeKS method useful and called from instdata (#493703).
(clumens)
- Add writeKS methods to the device objects. (clumens)
- Add writeKS methods to all the format objects. (clumens)
- upd-instroot: Add gdbserver (ajax)
- Remove text-mode syslinux help (katzj)
- If clearPartType is None, don't attempt to clear a device (#499321).
(clumens)
- Only set clearpart data if the command was provided in the kickstart file.
(clumens)
- Override previously defined mountpoints in kickstart (#499746). (clumens)
- Yet another font package name has changed (#499322). (clumens)
- Set new mountpoint correctly for existing encrypted LVs. (#496363)
(dlehman)
- Once a partition is part of another device it cannot be modified.
(#496760) (dlehman)
- Maintain request sort order by using req_disks instead of parents.
(dlehman)
- Do not set a parent on the /mnt/sysimage/dev bind mount object (#499724).
(clumens)
- Skip .pyc files in subdirectories when running make updates. (clumens)
- Remove 'lowres' option. (ajax)
- Run tune2fs on newly formatted ext[34] filesystems. (#495476) (dlehman)
- Don't clear the first partition on any disk with a Mac disk label
(#492154). (clumens)
- Add detailedMessageWindow to the cmdline class (#499700). (clumens)
- Don't traceback when a freespace partition is present (#499662). (clumens)
- Do nomodeset when doing xdriver=vesa (ajax)
- Fix calculation of smallest PV's size in the lvm dialog. (#493753)
(dlehman)
- Fix KeyError when partition numbers change during allocation. (#497911)
(dlehman)
- Update EFI CD booting code in mk-images (pjones)
- Collect network interfaces from NetworkManager (#493995) (dcantrell)
- Handle fstab entries whose filesystem we don't recognize.(#498120)
(dlehman)
- Add an error signifying an unrecognized entry in /etc/fstab. (dlehman)
- Don't drop discovered format with unknown devices when parsing fstab.
(dlehman)
- Fix display of paths for device-mapper device in bootloader widget.
(dlehman)
- Don't call udevDeviceFormat if we're just going to clear the device
(#497323). (clumens)
- Pass clearPartType to the devicetree as well. (clumens)
- Break the complex should-clear logic out of clearPartitions. (clumens)
- Handle clearpart in the early kickstart pass too. (clumens)
- Correct setting the SELinux context on mountpoints (#494995). (clumens)
- make resetFileContext return the context set (wwoods)
- Allow editing of the hdiso source partition so it can be mounted
(#498591). (clumens)
- Add a ignoreProtected= parameter to deviceImmutable that does the obvious.
(clumens)
- Be more aggressive unmounting before install starts (#498260) (katzj)
- Add %{?dist} to the release number in the spec file. (dcantrell)
- Configure network in kickstartNetworkUp() iff NM is not connected
(#490518) (dcantrell)
- Don't segfault with "ks someotherparam" (#498307). (clumens)
- Fix the arch upgrade check in yuminstall.py, too (#498280). (clumens)
- Move _resetRpmDb into iutil so we can access it everywhere. (clumens)
- Don't mount bind mounts last, that makes /dev break. (pjones)
- Pass anaconda to storage.FSSet.turnOnSwap. (dlehman)
- Ignore spurious formatting on partitioned devices. (dlehman)
- Revert "DeviceError only returns a message, not (message, device) tuple
(#496343)." (dlehman)
- Fix action sorting for partitions on the same disk. (#498064) (dlehman)
- Fix traceback in second editing of existing raid dev (#497234). (rvykydal)
- Allow existing LVs with filesystems to be resized (#490913) (dcantrell)
- Rate limit pulse() calls to ProgressWindow. (pjones)
- Don't populate flags.cmdline with "True" values when no = is used. (pjones)
- Add "nomodeset" to the list of command line arguments copied to grub.conf
(pjones)
- Use device.format.mountType insead of device.format.type for fstab.
(pjones)
- Initialize x86 class variables before efiBootloaderInfo.__init__() (pjones)
- Fix a segfault on nfs+kickstart (pjones)
- Fix an error when raising FormatCreateException. (clumens)
- Add more windows to the rescue interface class (#498014). (clumens)
- Remove requirement for EFI machines to be x86, since IA64 is too
(#497934). (clumens)
- Fix the kernel package selection on ppc64 machines (#497264). (clumens)
- Include fsck.ext4 and mkfs.ext4 in the images (#497996). (clumens)
- Properly restore SIGCHLD if X startup fails (wwoods)
- Fix kickstart PV references handling for lvm on raid (#497352). (rvykydal)
- Clean up argument list after changing from rhpl to iutil for
execWithRedirect (jkeating)
- Fix NameError traceback setting up bootloader in EFI installs (wwoods)
- No longer force ISOs to be on ext2, ext3, or vfat partitions. (clumens)
- Sending translation for German (ckpinguin)
- Split text mode exn saving into multiple screren (#469380). (clumens)
- Copy /tmp/program.log to /mnt/sysimage/var/log/. (clumens)
- Fix member preselection in raid UI. (rvykydal)
- Fix editing of raid device (persistence of level choice) (#496159)
(rvykydal)
- Fix ks --useexisting and --noformat options of logvol and volgroup
(rvykydal)
- Make sure inconsistencies dont screw us up. (jgranado)
- Re-implement the inconsistency functionality. (jgranado)
- Allow the use of "-" in the lvm names. (495329) (jgranado)
- Make sure we "insist" on mdadm commands. (491729) (jgranado)
- [PATCH] Possible fix for some encryption related bugs during the Custom
Layout editation (#495848) (msivak)
- Make sure we have a clean lvm ignore list when we initialize. (jgranado)
- We need to search by name without the "mapper" prefix. (jgranado)
- Create a min_max constraint to avoid alignments issues. (jgranado)
- Don't exit the installer from filesystem errors. (dlehman)
- Try not to raise exceptions from minSize calculators. (dlehman)
- Don't traceback when PVs are encrypted or are not partitions. (dlehman)
- Adjust device dependencies when backing out device encryption. (#493257)
(dlehman)
- Include filesystem type in mount log message. (dlehman)
- Load filesystem modules on demand (#490795, #494108). (clumens)
- Use existing partitions when --onpart is used for PVs or raid members
(#493065) (rvykydal)
- Raise message, not exception when size set in LV dialog is too big.
(rvykydal)
- Raise an error when remofing an extended part with logical parts.
(jgranado)
- Esthetic changes to storage/partitioning.py. (jgranado)
- dmraid.py is no longer being used by anything, so remove it. (clumens)
- Remove partedUtils.py. (clumens)
- This is the only place isEfiSystemPartition is used, so pull it in.
(clumens)
- getReleaseString now lives in the storage module. (clumens)
- Stop lying about our support for dmraid and multipath in kickstart.
(clumens)
- Remove some old, unused code that also uses biosGeometry. (clumens)
- For very small disks, don't try to display a stripe in the graph
(#480484). (clumens)
- Fix reading the console= parameter from the cmdline (#490731). (clumens)
- For dmraid partititons device node name != name (hdegoede)
- When a partition request gets unallocated, set the name back to req#
(hdegoede)
- Do not use getPartitionByPath() in allocatePartitions() (hdegoede)
- Remove no longer used iscsi_get_node_record function (hdegoede)
- Try to handle devices which live in a subdir of /dev properly (hdegoede)
- Split DeviceTree.addUdevDevice into several smaller methods. (dlehman)
- Don't traceback from failure finding minimum fs size. (#494070) (dlehman)
- udev_settle after format teardown to avoid EBUSY on device teardown.
(#492670) (dlehman)
- Add a parted.Device attribute to all existing StorageDevices. (dlehman)
- If no partitioning commands are given, apply the UI selections (#490880).
(clumens)
- Update font package names for ml_IN, si_LK, etc. (#493792, #493794).
(clumens)
- Fix a typo in the city name for Nepali (#493803). (clumens)
- Fix writing out the partition= line on PPC (#492732). (clumens)
- Do not check size when adding LV to growing VG (bug #492264) (rvykydal)
- Don't let device names affect action order in general case. (dlehman)
- Round up when aligning to pesize for space used. (#493656) (dlehman)
- Improve handling for various nodev filesystems in fstab. (#493685,
#493202) (dlehman)
- Present the correct max lv size in the dialog. (dlehman)
- Use the head of the current branch, not master, for scratch archives.
(dlehman)
- Make a top level StorageError that all others are based on. (dlehman)
- Remove unused PRePDevice class. (dlehman)
- Make the disk model an attribute of DiskDevice. (dlehman)
- Handle format actions in cancelAction() (dcantrell)
- Fix format check box for pre-existing partitions (#491675) (dcantrell)
- Remove temporary directory used in _getExistingSize() (dcantrell)
- Activate storage before looking up the hdiso source drive (#491781).
(clumens)
- Remove isys.getDeviceByToken since it is no longer used. (clumens)
- Don't allow the rootfs on live installs to not match (#493206, #492727)
(katzj)
- Create setup and teardown functs for dmraid devs. (jgranado)
- put xfs back where it belongs (sandeen)
- Fix up the other caller of unmountCD to pass in a device (#493537).
(clumens)
- Start with a basic /etc/hosts file (#491634) (dcantrell)
- Do not flag every existing partition for resize (#491803) (dcantrell)
- Remove unused noformatCB() function. (dcantrell)
- Remove unnecessary istruefalse() function. (dcantrell)
- Build new _isys.so for updates.img if needed. (dcantrell)
- Get the UUID of each md array we create. (#491796) (dlehman)
- Call udev_settle after committing changes to a disk (#491529) (hdegoede)
- Be a little bit smarter about allocating space to grow parts. (#491761)
(dlehman)
- Check that partition is on the disk before trying to remove it. (#491997)
(dlehman)
- Work around a bug in mdadm incremental assembly. (dlehman)
- Use the same units (MB) for extent size that we do for everything else.
(dlehman)
- Put line breaks in between crypttab entries. (#491938) (dlehman)
- Register the NoDevFS class. (clumens)
- fslabels -> labels. (clumens)
- NFSDevice does not take exists= as a parameter. (clumens)
- Override _setDevice and _getDevice in NFS. (clumens)
- Move resolveDevice into the DeviceTree class. (clumens)
- Move most of the parseFSTab logic into its own function. (clumens)
- We don't even use partedUtils in this module. (clumens)
- PReP formats can never be active. (#491865) (dlehman)
- Move protectedPartition setup into storageInitialize (#491781). (clumens)
- Use the mount and unmount methods on OpticalDevice.format now. (clumens)
- Add a format for ISO9660 filesystems. (clumens)
- getDeviceByName does not expect the CD device to start with "/dev/"
(#491768). (clumens)
- Write the same arch to .discinfo as iutil.getArch() gives us (#490977).
(clumens)
- Don't remove partitions twice. (jgranado)
- Add EFI, Apple Bootstrap, and PPC PReP Boot formats. (dlehman)
- Remove all implicit calls to self.format.destroy from Device classes.
(dlehman)
- Pop the busy cursor when we're done with the wait window (#491736).
(clumens)
- If the new size and old size are the same, treat as a no-op (#491496).
(clumens)
- Let mountFilesystems handling bind mounting /dev (#490772). (clumens)
- Not all FileDevices have parents, so don't assume. (clumens)
- Bind mount formats are mountable. (clumens)
- If a filesystem is already mounted, don't raise an error. (clumens)
- Fix a typo calling the superclass's constructor. (clumens)
- Add a fake device for bind mounting /dev. (clumens)
- If there was an exception leading to the urlgrabber error, log it.
(clumens)
- Fix the import of checkbootloader (#491574). (clumens)
- Add a missing import (#491605). (clumens)
- Fix traceback in FSSet.crypttab. (#491160) (dlehman)
- Fix traceback on upgrade. (#491446) (dlehman)
- Do not include .h and .sh files in updates.img (dcantrell)
- Make PartitionDevice resize work. (dcantrell)
- Reset mouse pointer if we find an unreadable disk. (dcantrell)
- Use label attr instead of non-existent fslabel attr. (#491120) (dlehman)
- Need to notify the kernel of changes before udev settle (katzj)
- Revert "mount and umount commands are in /sbin now, remove from /usr/sbin"
(dcantrell)
- Make some fixes to the rescue mode system selection UI (#489973, #489977).
(clumens)
- Fix text mode autopartitioning (#491282). (clumens)
- Do not use _rnetdev as fstab option for network based / (hdegoede)
- Make root= line in grub.conf and path spec in fstab consistent (hdegoede)
- Fix a reference to the partitions list (#491335). (clumens)
- Do not traceback at the very beginning of rescue mode (msivak)
- Fix traceback when editing encrypted mdraid device in UI. (rvykydal)
- Catch FSError when detecting storage, prevent user from continuing.
(dcantrell)
- If we have no error string, place None in the tuple. (dcantrell)
- Move OUTPUT_TERMINAL definition to isys.h (dcantrell)
- mount and umount commands are in /sbin now, remove from /usr/sbin
(dcantrell)
- Avoid SIGSEGV in doPwMount() when NULL is last parameter (#491192)
(dcantrell)
- Attempt disk commits 5 times before raising an exception. (dcantrell)
- Add boot partition size limit properties and size validation method.
(dlehman)
- Make sure boot flag gets set. (#491170) (dlehman)
- Make bootable a property of PartitionDevice. (dlehman)
- After setting up our random UUID, inform the storage layer (katzj)
- Handle system crappyness. (jgranado)
- Fix up checking for live image backing (katzj)
- Let's not remove our mountpoints (katzj)
- Fix writing the default= line in grub.conf (#490756). (clumens)
- Revert "Fix pruning of destroy actions for preexisting devices." (dlehman)
- Add more blacklisting (katzj)
- Blacklist the live image backing device (katzj)
- Move blockdev blacklisting to be a function (katzj)
- Inhibit devkit-disks during a live install (katzj)
- try to unmount everything from /media on live installs (katzj)
- Fix live installs to not traceback (katzj)
- Fix New partition in UI (rvykydal)
- Rework the lvm dialog. (#490301,#490966,#490681,#489870) (dlehman)
- Improve chances of uniqueness from Storage.createSuggestedLVName. (dlehman)
- Fix pruning of destroy actions for preexisting devices. (dlehman)
- Devices should not be resizable unless they exist. (dlehman)
- Try to activate an existing md array after adding each member. (dlehman)
- Indicate filesystem is mountable if we have a mount command. (dcantrell)
- Mount existing filesystems read-only when getting size. (dcantrell)
- Fix some errors in the updates target. (dcantrell)
- Place all mount.* commands in /sbin (dcantrell)
- Fix error message reading and writing in doPwMount() (dcantrell)
- Use booleans in isys.mount() and isys.umount() (dcantrell)
- Add a FIXME comment for setting uuid in VG / LV create (hdegoede)
- Do not traceback when writing anaconda.ks with iscsi with auth info.
(hdegoede)
- Do not write LV uuid to grub.conf, but the filesystem uuid (hdegoede)
- If a mountpoint depends on a network disk at _netdev to its fstab options
(hdegoede)
- Do not hang when creating raid array with member having filesystem
detected (#490891) (rvykydal)
- Destroy and create luks child of raid array too when editing in UI.
(rvykydal)
- Editing non-existent raid device by destroying and creating actions
(rvykydal)
- actionDestroyFormat call takes device, not format (rvykydal)
- Fix getChildren call in partition UI (rvykydal)
- Fix removing of devices with the same name from tree when adding
create action. (rvykydal)
- Do not duplicate requested minor number in edit raid UI list. (rvykydal)
- Offer available partitions when editing non-preexisting raid request.
(rvykydal)
- Don't try to fit the whole StorageDevice.__str__ output into the UI
(#490406). (clumens)
- Make PartitionDevice handle both normal and dmraid partitions (hdegoede)
- Stop overriding __init__ in DMRaidPartitionDevice (hdegoede)
- Set format UUID after creating a format (hdegoede)
- Fix result of updateSysfsPath to be consistent with initial sysfsPath
values (hdegoede)
- Use getDevicesByInstance() for storage.partitions (hdegoede)
- We no longer use iscsiadm anywhere (hdegoede)
- Typo fix. (clumens)
- Make platform.checkBootRequest work better and not use diskset anymore. (clumens)
- Fix a traceback when looking for PS3 boot partitions (#490738). (clumens)
- FormatArgs -> FormatOptions (#490737). (clumens)
- Fix ppoll() timeout=infinity usage in auditd (#484721). (pjones)
- Simplify kernel package selection. (clumens)
- Look at CPU flags instead of /proc/iomem to determine PAE-ness (#484941). (clumens)
- Tell NM not to touch interfaces when / is on a network disk (hdegoede)
- Get iscsi going with the new storage code (hdegoede)
- Use minihal instead of isys.hardDriveDict in list-harddrives (#488122). (clumens)
- storage.disks never includes disks without media present. (clumens)
- Changed the getDevicebyLabel() to getDeviceByLabel() in devicetree.py (mgracik)
- Don't use disk.maximizePartition anymore. (dlehman)
- Only schedule implicit format destruction if there is formatting to
destroy. (dlehman)
- Reset encryptionPassphrase when we reset the rest of storage. (dlehman)
- Do not create a LUKSDevice if we do not have a way to map the device.
(dlehman)
- Fix handling of new extended partitions during partition allocation.
(dlehman)
- Fix bug in dependency list for partitions. (dlehman)
- Fix inconsistency in variable use in search for free space. (dlehman)
- Check for disk name being in disk.name not in clearPartDisks (dcantrell)
- Create a Makefile target to generate updates.img automatically. (dcantrell)
- When creating free space, handle cases other than clearpart --drives=
(clumens)
- Ignore loop and ram devices (hdegoede)
- devicetree: fix slave addition of incomplete dm / md devices (hdegoede)
- Catch LVMErrors too when tearing down devices (hdegoede)
- Install udev rules in /lib/udev/rules.d instead of in runtime dir
(hdegoede)
- Ignore disk devices with missing media (#488800). (clumens)
- Use correct parse method for the upgrade command (#471232) (wwoods)
- Fix creation of fs options for preexisting encrypted devices. (dlehman)
- Fix lots of buggy behavior in the partition dialog. (dlehman)
- Handle FTP servers that both want and don't want PASS after USER
(#490350). (clumens)
- Fixed the names of the variables for lvm.py functions. (mgracik)
- editPartitionRequest -> editPartition in iw/partition_gui.py (#490384).
(clumens)
- clampPVSize -> clampSize in lvm.py (#490295). (clumens)
- Fix the obvious and stupid typo (#490296). (clumens)
- isys.umount removes mount directory by default (rvykydal)
- Fix tempfile.mkdtemp call. (rvykydal)
- Initialize attribute _mountpoint before using it (rvykydal)
- devicetree.py has _ignoredDisks instead of ignoredDisks. (jgranado)
- Create separate resize actions for formats and devices. (dcantrell)
- Use os.statvfs() to get existing filesystem size. (dcantrell)
- Add resizeArgs for Ext2FS and fix it for BtrFS. (dcantrell)
- Report when we cannot find any free space partitions. (dcantrell)
- Improve resizeDialog text. (dcantrell)
- Raise FSResizeError if filesystem cannot be resized. (dcantrell)
- Handle resizing when setting targetSize for PartitionDevice (dcantrell)
- Let users set the size property of StorageDevices. (dcantrell)
- Add support for kickstart's '--initlabel' option to clearpart. (dlehman)
- Fix display of LV format type for encrypted LVs. (dlehman)
- Make paths somewhat flexible so we'll work in normal environments.
(dlehman)
- Fix supportable attribute for cmdline-enabled fstypes. (dlehman)
- Access private attribute for luks dict. (dlehman)
- Schedule format create for newly encrypted preexisting partition. (dlehman)
- Don't traceback if vg.teardown fails in recursive teardown. (dlehman)
- Schedule format create action for newly encrypted preexisting LV. (dlehman)
- Make sure we return something other than None for new requests. (dlehman)
- Add __str__ methods to Device objects. (clumens)
- Add mediaPresent and eject to the OpticalDevice class. (clumens)
- Use the right import path for checkbootloader (#490049). (clumens)
- Rename /etc/modprobe.d/anaconda to /etc/modprobe.d/anaconda.conf (clumens)
- Don't clear partitions containing the install media. (dlehman)
- Wait til everyone knows the format/fs is no longer active. (dlehman)
- Save a copy of the device stack so we can destroy the format. (#489975)
(dlehman)
- Add a deep copy method to Device since we can't just use copy.deepcopy.
(dlehman)
- Fix infinite loops in partition screen populate. (#490051) (dlehman)
- Default to a name based on the uuid for existing luks mappings. (dlehman)
- Use the correct keyword for luks map names ('name', not 'mapName').
(dlehman)
- Fix getting of number of total devices of sw raid. (rvykydal)
- Only select the Core group in text mode (#488754). (clumens)
- Added test case for devicelib mdraid.py. (mgracik)
- Add created user to default group created for the user. (rvykydal)
- Fix editing of existing logical volume. (rvykydal)
- Add a list that lvm should ignore. (jgranado)
- Don't create a PartitionDevice for devices that do not exist (#489122).
(clumens)
- A getter doesn't usually take a parameter (#489965). (clumens)
- Do not write "Running..." to stdout, as that could be tty1. (clumens)
- Call storage.exceptionDisks, not diskset.exceptionDisks. (#489615)
(dlehman)
- Fix typo. (jgranado)
- Fix typo. (dlehman)
- Add udev rules for handling for mdraid arrays. (dlehman)
- Honor the zerombr kickstart directive. (dlehman)
- currentSize is expected to be a float, so convert it to one (#489882).
(clumens)
- It's clearPartDisks, not clearPartDrives. (clumens)
- Get rid of the mappings and ksID as well. (clumens)
- Make sure the device has a diskType before attempting to check what it is.
(clumens)
- Update the volgroup command to work with the new storage code. (clumens)
- Update the raid command to work with the new storage code. (clumens)
- Update the part command to work with the new storage code. (clumens)
- Update the logvol command to work with the new storage code. (clumens)
- addPartRequest is no longer needed. (clumens)
- Don't set default partitioning in every kickstart case. (clumens)
- Clear partitions before scheduling requests. (clumens)
- Always go through doAutoPart. (clumens)
- Format modules import fix (mgracik)
- Fixed the format modules import (mgracik)
- Allow overriding the anaconda udev rules from an updates.img (hdegoede)
- If a pv somehow does not contain a vg_name, do not try to get other vg
info (hdegoede)
- Fix a few bugs in the lvm dialog. (#489022) (dlehman)
- Modify livecd.py to work with new storage backend. (dlehman)
- Be explicit about resetting Disks' partedDisk attribute. (#489678)
(dlehman)
- Deactivate devices after we've finished scanning them. (dlehman)
- Handle the case of removing an unallocated partition from the tree.
(dlehman)
- Try again to set up LVs when we've just added a new PV to the VG. (dlehman)
- Set partition flags in format create/destroy execute methods. (dlehman)
- Make sure we use the newly committed parted.Partition after create.
(dlehman)
- Make device teardown methods more resilient. (dlehman)
- Initialize storage in rescue mode so we can find roots (#488984). (clumens)
- We also need to pack up the extra args tuple, too. (clumens)
- doLoggingSetup keeps growing new arguments, so put them into a dict
(#489709). (clumens)
- Fix anaconda udev rules to not require pre-existing device nodes (hdegoede)
- Hook up 'Shrink current system' dialog to new storage code. (dcantrell)
- Fix _getCheckArgs() in class FS. (dcantrell)
- Fix action pruning to handle more complex scenarios. (dlehman)
- Schedule destruction of any existing formatting along with the device.
(dlehman)
- Add a size attribute to mdraid arrays. (dlehman)
- Speed up partitioning screen redraws by trimming workload where possible.
(dlehman)
- Create partitions with exactly the geometry we calculate. (dlehman)
- Fix name collision between formats.mdraid and devicelibs.mdraid. (dlehman)
- Destruction of the member device formatting will be handled elsewhere.
(dlehman)
- Fix a typo (jkeating)
- Fix pruning between two destroy actions on the same device (rvykydal)
- Use the pyblock functions when possible. (jgranado)
- We are searching a list, not a dict now (rvykydal)
- Move the recursive teardown of all devices out of processActions. (dlehman)
- Clean up handling of /proc, /sys, /dev/pts, /dev/shm entries. (dlehman)
- Fix several minor bugs preventing upgrade/rescue mount. (#488946) (dlehman)
- Only populate the device tree on demand. (dlehman)
- Prune actions by device based on path, not object-id. (dlehman)
- Rewrite action sort so it works correctly. (dlehman)
- Do a separate disk.commit for each partition add/remove. (dlehman)
- Fix bug keeping track of best free region/type/disk info. (dlehman)
- Return early if doAutoPart is False, but clearpart first if kickstart.
(dlehman)
- Recognize PS3 as a valid machine type (#489263). (clumens)
- Move the mdRaidBootArches logic into the platform module. (clumens)
- stdout and stderr may also need to be created. (clumens)
- Fix booty for dmraid (hdegoede)
- It's self.origrequest, not self.origreqest (#489036). (clumens)
- Added crypto.py unittest; Updated devicelibs tests baseclass.py and lvm.py
(mgracik)
- Start storage before parsing the kickstart file. (clumens)
- Make sure autopart without any clearpart command will fail. (clumens)
- Update storage flag on ks autopart (rvykydal)
- Use correct storage attribute for ks clearpart (rvykydal)
- Catch the new _ped.DiskLabelException for unrecognized disklabels.
(dlehman)
- Catch all failures from making parted objects in exceptionDisks. (dlehman)
- various dmraid fixes. (jgranado)
- Implement the format disk question as a callback. (jgranado)
- Add dmraid functionality to new storage code. (jgranado)
- Do not pass None values into nonmandatory arguments, you are screwing the
default values.. (msivak)
- Schedule device destroy actions for partitions last. (dlehman)
- Pass storage.disks, not storage, to createAllowed.... (#488860) (dlehman)
- Nodev filesystems always exist. And the device is arbitrary. (dlehman)
- Include proc, &c filesystems in fstab and FSSet.{mount/umount}Filesystems.
(dlehman)
- Remove FSSet.writeFSTab. That job is handled elsewhere. (dlehman)
- Add properties to FSSet to provide the nodev entries. (dlehman)
- Fix incomplete format in Storage.deviceImmutable. (dlehman)
- Make sure we use the same disk the free space is on. (#488807) (dlehman)
- Prevent clobbering of name 'mdraid' by qualifying it. (dlehman)
- Handle unformatted disks and cdroms in Storage.exceptionDisks. (dlehman)
- Add resizeArgs property for resizable filesystems. (dcantrell)
- Fill out class NTFS a bit more. (dcantrell)
- Add fsckProg property to class FS. (dcantrell)
- Ext2FS.migratable(self) -> Ext2FS.migratable (dcantrell)
- Fix StorageDevice.minSize() and PartitionDevice.maxSize() (dcantrell)
- Center resize window on the screen. (dcantrell)
- Do not raise DeviceError if not bootable device is found. (dcantrell)
- Do an even more thorough job of ignoring disks libparted doesn't like.
(clumens)
- Fix a couple problems on the "Change device" bootloader dialog. (clumens)
- Fix a typo when writing out the mdadm config file. (clumens)
- Remove all uses of isys.cdromList, which no longer exists. (clumens)
- Check to see if we're on S390 on the congrats screen (#488747). (clumens)
- Handle non-fatal errors more gracefully in addUdevDevice. (dlehman)
- partRequests no longer exists, so don't try to import it (#488743).
(clumens)
- When building the exceptionDisks list, skip devices libparted doesn't
like. (clumens)
- Iterate over devicetree.devices.values, not devicetree. (dlehman)
- Add a get() method to Flags, since it pretends to be a dictionary.
(clumens)
- Stop with the fsset usage. (dlehman)
- Format message string after translation not before (msivak)
- We need newer python-cryptsetup because of the default values for cipher
and keysize for luskFormat (msivak)
- If a drive is not initialized, offer reinitialization or ignoring the
drive to the user (msivak)
- More syntax errors / traceback fixes (hdegoede)
- Fix syntax errors (rvykydal)
- Implement Storage.sanityCheck, mostly from old partitions code. (dlehman)
- Remove old content from utils/ (dcantrell)
- Ensure request.drive is always a list (#485622) (dcantrell)
- Pick up pyblock if it exists in block/ on an updates.img. (dcantrell)
- Don't check for a swapfs on things that aren't partitions (#485977).
(clumens)
- Perform ext3->ext4 filesystem migration if ext4migrate is given (#484330).
(clumens)
- Translate i?86 into i386 as a base arch. (jkeating)
- Teach upd-instroot about i586 arch, for sake of glibc.i586/openssl.i586
(jkeating)
- Fix the obvious typo. (clumens)
- filer.login raises an exception with it can't login, not returns None
(#486454). (clumens)
- Take into account that a parted.Partition's _fileSystem can be None
(#485644). (clumens)
- Fix indentation on upd-instroot (kanarip)
- Fix the indentation in mk-images (kanarip)
- Remove unused iface_netmask2prefix() function. (dcantrell)
- A parted.Disk has no attribute named "dev". It's named "device"
(#486007). (clumens)
- Use brandpkgname for the efi art too (katzj)
- Let's use the product string for a brandpackage name. (kanarip)
- Fix indentation in mk-images.efi (kanarip)
- Fix indentation in buildinstall script (kanarip)
- It's part.active, not part.is_active(). (clumens)
- File the basic traceback as the first comment instead of a generic
message. (clumens)
- Encode our upgrade policy in productMatches/versionMatches and enforce it.
(clumens)
- If we'd show package selection on kickstart installs, also show tasksel.
(clumens)
- If ks=nfs:... is given, don't try to find the file via boot options
(#480210). (clumens)
- Fix cdrom install on machines with no network devices (wwoods)
- updated fuzzy strings (jsingh)
- Use modinfo to find out what firmware we need in initrd (wwoods)
- Use the preconf object for yum configuration now (jantill). (clumens)
- Updated Dutch translation adn only 1 -fuzzy- string left (zuma)
- Add a boot target for the xdriver=vesa parameter and document it. (clumens)
- repo.proxy is now a property, so check before setting it (#481342).
(clumens)
- Workaround compile error due to (# 478663) (hdegoede)
- Various packaging fixed from review (#225246) (hdegoede)
- Show the header in certain non-lowres cases (#478765, alsadi AT
ojuba.org). (clumens)
- Remove doMultiMount. (clumens)
- Use mount -t auto instead of passing a list of valid fstypes (#477328).
(clumens)
- Fix case sensitivity when searching for headers (kanarip)
- Fix a traceback in checking for network install (ricky AT
fedoraproject.org). (clumens)
- Reduce direct D-Bus calls in isys/iface.c. (dcantrell)
- Allow 'ks' to function as it once did (#471812) (dcantrell)
- Fix telnet install support (#471082) (dcantrell)
- Call 'udevadm settle' instead of 'udevsettle'. (dcantrell)
- When using anaconda with kickstart file with UI mode - do not show the VNC
question (#476548) (msivak)
- Check error from asprintf() correctly for dhcpclass handling. (dcantrell)
- Use libnm_glib in net.c:get_connection() (dcantrell)
- Add libnm_glib CFLAGS and LIBS to loader's Makefile. (dcantrell)
- BR NetworkManager-glib-devel. (dcantrell)
- Only write the short hostname to the localhost line (#474086) (dcantrell)
- Updated Tajik Translation - Victor Ibragimov (victor.ibragimov)
- Copy /etc/dhclient-DEV.conf file to target system (#476364) (dcantrell)
- Use macros for D-Bus paths (dcantrell)
- Let X tell us when it's launched rather than just sleeping. (ajax)
- When there's no baseurl, set a default of [] instead of [''] (#476208).
(clumens)
- cracklib now raises exceptions on bad passwords (rzhou, #476312). (clumens)
- Make sure ssh doesn't get duplicated in the open port list (#474937).
(clumens)
- mdraid1: default to putting grub on partition instead of mbr (#217176)
(hdegoede)
- Don't install the games group as part of office/productivity (#472324).
(clumens)
- Don't dump encryption passphrases. (dlehman)
- Write anacdump.txt upon receipt of SIGUSR2 (from clumens). (dlehman)
- Use stacks instead of tracebacks in traceback handlers. (dlehman)
- Unmount swap devices when migrating filesystems, then reactivate
(#473260). (clumens)
- Handle both /dev/sr0 and sr0, since that's what cdromList gives (#475083).
(clumens)
- In iface_ip2str(), make sure to advance to next item before continue.
(dcantrell)
- We already have _GNU_SOURCE defined in Makefile.inc (dcantrell)
- Remove XXX comment in net.c about GATEWAY (dcantrell)
- Use strverscmp() from glibc in place of rpmvercmp() (dcantrell)
- Remove readLine() function from loader/loadermisc.c (dcantrell)
- Do not write SEARCH line to ifcfg-DEVICE file (#474858) (dcantrell)
- Preserve existing network configuration files during install (#461550)
(dcantrell)
- Send unique vendor class identifier unless user specifies one. (dcantrell)
- Avoid tracebacks when filling in static network config fields (#474275)
(dcantrell)
- Prevent network install when no network devices are found (#470144)
(dcantrell)
- Remove markup from text before printing it in cmdline mode (#470253).
(clumens)
- Move strip_markup() into iutil. (clumens)
- Fix up plural forms header so that python doesn't blow up for us (katzj)
- Change text to reflect Jesse's comments (katzj)
- Add support for the Tajik language (#455963). (clumens)
- Add a button to the UI to ignore all missing packages. (clumens)
- First small eu.po transtation, just to be sure that the system is set up
OK. (mikel.paskual)
- mini-wm: Turn on automatic window redirection. (ajax)
- Better naming for LVM volume groups and logical volumes (#461682)
(dcantrell)
- Partition requests can be None when populating the tree. (#474284)
(dlehman)
- Say we are unable to configure the network interface (#467960) (dcantrell)
- Match textw/network_text.py strings to iw/network_gui.py (#470145)
(dcantrell)
- In addSnap(), check snapshots for data key before continuing (#433824)
(dcantrell)
- Load FCP modules early for CD/DVD install (#184648) (dcantrell)
- Update mk-s390-cdboot.c to work with large kernel images (#184648)
(dcantrell)
- Make sure fstype exists before we try to test it (#473498). (clumens)
- Updated a small correction in kn locale (svenkate)
- Use modules.* files for finding modules of a type rather than modinfo
(katzj)
- Make complete text mention updates (#244431) (katzj)
- Make text for autopartitioning types clearer (#441350) (katzj)
- Allow installing grub on the MBR if /boot is on mdraid (#217176) (hdegoede)
- Fix some spelling errors in German translation (fabian)
- Make the required media dialog less wordy (#469557). (clumens)
- returnNewestByName now raises an error instead of returning [] (#472462).
(clumens)
- Fix death on login of an OLPC on a live image (katzj)
- Fix ld-*.so globbing for glibc-2.9 . (pjones)
- Do not bring up network for non-remote kickstart locations (#471658)
(dcantrell)
- Resolve dm-X devices returned by pvdisplay. (#448129) (dlehman)
- More shell script syntax fixing (katzj)
- Only bring up the network dialog on package failures if required
(#471502). (clumens)
- Don't have the key icon take up so much space on the LUKS dialog
(#470338). (clumens)
- Avoid getting linux-base in the kernel list (katzj)
- Deselect groups when we reset things also (#469854) (katzj)
- make iscsi login code wait for udev to create the devices (#466661,
#470073) (hdegoede)
- Set the correct path when using the directory chooser. (clumens)
- We always need a wait window, not just when the repo has a name. (clumens)
- Set initial state of IP configuration fields in text mode (#469933)
(dcantrell)
- Prevent traceback when there are no network devices (#469339) (dcantrell)
- Indentation fix. (pjones)
- Let users edit net settings on network failure in stage 1 (#465887)
(dcantrell)
- Move startNewt later to avoid printing extra messages on the screen
(#469687). (clumens)
- Revert "Make sure dialog deletions take effect sooner (#455676)." (clumens)
- Don't set up the launcher for the installer on XO (katzj)
- Whitespace cleanups for timezone.py (dcantrell)
- Do not store mount options in loaderData->instRepo (#467760) (dcantrell)
- Make sure we look up the IP address for the correct device (#469439)
(dcantrell)
- Remove unused bool() function. (dcantrell)
- Check for required space for / on live installs (#468867) (katzj)
- Add a basic method for checking the minimal size needed for a backend
(katzj)
- Fix typo that somehow snuck in (katzj)
- If there's no language selected, don't traceback (#469578). (clumens)
- Improve filtering of non-available groups (#469438) (katzj)
- filer.py: set defaultProduct in __init__ (hdegoede)
- Fix indentation error in filer.py (again) (hdegoede)
- Rebuild keymaps to get rid of trq.map (#469433). (clumens)
- Provide sample punch card reader script for s390x (#462953) (dcantrell)
- Fix a typo that shouldn't have even gotten though. (clumens)
- Check that the platform and product are also correct (#469367). (clumens)
- Remove cio_ignore functionality for s390x (dcantrell)
- Remove bootdisk/s390 (dcantrell)
- If method=nfs: is given, check if it's really an NFSISO install (#468885).
(clumens)
- Get the right list elements for the iscsi text interface (#466902).
(clumens)
- Don't traceback when displaying error messages (#469372). (clumens)
- Make sure we differentiate locked luks devs from deleted ones. (dlehman)
- Fix a typo that breaks kickstart with encryption. (#469318) (dlehman)
- Call startNewt earlier than network bring up (#469171). (clumens)
- Write out the path to the repo, not anaconda-ks.cfg (#467753). (clumens)
- Allow specifying devices by path if they're files (#468504) (katzj)
- Fix the last pychecker warnings in master (hdegoede)
- Add --strict option to runpychecker.sh (hdegoede)
- Don't sleep(5) after xrandr (ajax)
- Force DPI to 96 even harder (#458738) (ajax)
- Don't try to switch VT to the one that X is on (ajax)
- Only copy /etc/resolv.conf if instPath != '/' (dcantrell)
- 'is not' -> '!=' (dcantrell)
- Write --dhcpclass instead of --class to the anaconda ks file. (jgranado)
- Fix 2 issues in pyparted found by pychecker (hdegoede)
- Add a bit of documentation to the top of runpychecker.sh (hdegoede)
- Add runpychecker.sh script and pychecker-false-positives file (hdegoede)
- Fix saving tracebacks via scp while in text mode. (clumens)
- Search for the hash in the whiteboard, not as the entire whiteboard.
(clumens)
- Fix various syntax errors caught by PyChecker (hdegoede)
- Wouldn't it be nice to have some real documentation in filer.py? (clumens)
- Make sure the productVersion given by .treeinfo exists in bugzilla
(#468657). (clumens)
- Let DNS lookups work from %post scripts (#468132) (dcantrell)
- Do not use /.tmp for temporary files (#468720) (dcantrell)
- Don't treat encrypted PVs as available if we don't have the key. (#465240)
(dlehman)
- Do all new device passphrase prompting from partitioningComplete. (dlehman)
- Fix the obviously stupid typo. (clumens)
- There's a new version of the firewall command for F10 (#467753). (clumens)
- Another fix for printing package summaries in text mode (#468283).
(clumens)
- Fix traceback in network.bringUp() (#468651) (dcantrell)
- lvresize requires a --force arg now (#468478) (katzj)
- Include return code on resize failure error message (#468479) (katzj)
- Catch UnicodeDecodeError so traceback messages display anyway. (dcantrell)
- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)
- Log D-Bus messages at ERROR or INFO level. (dcantrell)
- Write dhcpclass to the dhclient conf file for the device (#468436)
(dcantrell)
- Tell NetworkManager not to touch network interfaces when / is a netfs
(hans)
- Catch more X failures and fallback to text (#467158). (clumens)
- Fix a typo when using network --gateway (#468364). (clumens)
- Fix icon (#468273) (katzj)
- Remove extra debug info. (pjones)
- Fix the damn spinner in the progress bar. (pjones)
- Fix whitespace. (pjones)
- Fix "looking for installation images" when there's no disc at all. (pjones)
- Make sure dialog deletions take effect sooner (#455676). (clumens)
- Make cdrom drive door status messages be INFO not DEBUG. (pjones)
- Don't switch to tty6 on vnc installs. (clumens)
- Update font list (#462295). (clumens)
- Don't display the entire lengthy device description (#467825). (clumens)
- Fix ext4 detection on existing partitions (#467047) (rvykydal)
- Make sure we handle the /tmp/method file for FTP correctly (#467753).
(clumens)
- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)
- Revert "dhclient-script not needed for NetworkManager" (clumens)
- Skip Installation Repo when writing out repo kickstart lines. (clumens)
- Correct media check docs (#468061). (clumens)
- Many translation updates
- Make kickstart installs work again (#374271, #392021, #448096, #466340,
#466304) (dcantrell)
- Let users go Back when loading updates. (dcantrell)
- Write ifcfg files to /etc/sysconfig/network-scripts instead of /.tmp
(dcantrell)
- Handle unknown hosts in getDefaultHostname (#466775) (dcantrell)
- Try to look up the hostname by the IP address NM reports (#466775)
(dcantrell)
- NM no longer provides the hostname as a property (#466775). (clumens)
- ext4dev -> ext4 (esandeen). (clumens)
- Move persistent network udev rule to under /etc (#464844). (clumens)
- Update keymaps to include latest Romanian settings (#466117). (clumens)
- Take ip= parameter values by not resetting ipinfo_set. (dcantrell)
- Remove unnecessary STEP_IP code. (dcantrell)
- Fix how configureTCPIP() returns. (dcantrell)
- Write new sysconfig data to a tmpdir first, then move in place. (dcantrell)
- Write NM_CONTROLLED=yes rather than NM_CONTROLLED= (dcantrell)
- Get rid of some iface flags that were not doing anything anymore.
(dcantrell)
- Generate new config files in /.tmp in writeEnabledNetInfo() (dcantrell)
- Remove unused variables from configureTCPIP() (dcantrell)
- Do not call get_connection() twice for DHCP. (dcantrell)
- Ask for language and keyboard in rescue mode (#466525). (clumens)
- Fix bringing up the network in rescue mode (#466523). (clumens)
- If we don't have a translation for a lang name, just use the English
(#466515) (katzj)
- Disable some more IPv6 checks. (clumens)
- Fix a typo (second part of #466374) (katzj)
