davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ff23eca3e8
kernel-ark/arch/ppc/platforms/4xx/bubinga.c
Russell King 59a675b220 [SERIAL] uart_port flags member should use UPF_* 
Convert usage of ASYNC_* to UPF_*.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-05 10:52:29 +00:00

264 lines
7.6 KiB
C
Raw Blame History

/*
* Support for IBM PPC 405EP evaluation board (Bubinga).
*
* Author: SAW (IBM), derived from walnut.c.
* Maintained by MontaVista Software <source@mvista.com>
*
* 2003 (c) MontaVista Softare Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/rtc.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/todc.h>
#include <asm/kgdb.h>
#include <asm/ocp.h>
#include <asm/ibm_ocp_pci.h>
#include <platforms/4xx/ibm405ep.h>
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
extern bd_t __res;
void *bubinga_rtc_base;
/* Some IRQs unique to the board
* Used by the generic 405 PCI setup functions in ppc4xx_pci.c
*/
int __init
ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
{29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
{30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
{31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
/* The serial clock for the chip is an internal clock determined by
* different clock speeds/dividers.
* Calculate the proper input baud rate and setup the serial driver.
*/
static void __init
bubinga_early_serial_map(void)
{
u32 uart_div;
int uart_clock;
struct uart_port port;
/* Calculate the serial clock input frequency
*
* The base baud is the PLL OUTA (provided in the board info
* structure) divided by the external UART Divisor, divided
* by 16.
*/
uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
uart_clock = __res.bi_procfreq / uart_div;
/* Setup serial port access */
memset(&port, 0, sizeof(port));
port.membase = (void*)ACTING_UART0_IO_BASE;
port.irq = ACTING_UART0_INT;
port.uartclk = uart_clock;
port.regshift = 0;
port.iotype = UPIO_MEM;
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 0 failed\n");
}
port.membase = (void*)ACTING_UART1_IO_BASE;
port.irq = ACTING_UART1_INT;
port.line = 1;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 1 failed\n");
}
}
void __init
bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
{
unsigned int bar_response, bar;
/*
* Expected PCI mapping:
*
* PLB addr PCI memory addr
* --------------------- ---------------------
* 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
* 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
*
* PLB addr PCI io addr
* --------------------- ---------------------
* e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
*
* The following code is simplified by assuming that the bootrom
* has been well behaved in following this mapping.
*/
#ifdef DEBUG
int i;
printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
printk("PCI bridge regs before fixup \n");
for (i = 0; i <= 3; i++) {
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
}
printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
#endif
/* added for IBM boot rom version 1.15 bios bar changes -AK */
/* Disable region first */
out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
/* PLB starting addr, PCI: 0x80000000 */
out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
/* PCI start addr, 0x80000000 */
out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
/* 512MB range of PLB to PCI */
out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
/* Enable no pre-fetch, enable region */
out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
(PPC405_PCI_UPPER_MEM -
PPC405_PCI_MEM_BASE)) | 0x01));
/* Disable region one */
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->ptm1ms), 0x00000001);
/* Disable region two */
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->ptm2ms), 0x00000000);
out_le32((void *) &(pcip->ptm2la), 0x00000000);
/* Zero config bars */
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_write_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
0x00000000);
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
/* end work arround */
#ifdef DEBUG
printk("PCI bridge regs after fixup \n");
for (i = 0; i <= 3; i++) {
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
}
printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
#endif
}
void __init
bubinga_setup_arch(void)
{
ppc4xx_setup_arch();
ibm_ocp_set_emac(0, 1);
bubinga_early_serial_map();
/* RTC step for the evb405ep */
bubinga_rtc_base = (void *) BUBINGA_RTC_VADDR;
TODC_INIT(TODC_TYPE_DS1743, bubinga_rtc_base, bubinga_rtc_base,
bubinga_rtc_base, 8);
/* Identify the system */
printk("IBM Bubinga port (MontaVista Software, Inc. <source@mvista.com>)\n");
}
void __init
bubinga_map_io(void)
{
ppc4xx_map_io();
io_block_mapping(BUBINGA_RTC_VADDR,
BUBINGA_RTC_PADDR, BUBINGA_RTC_SIZE, _PAGE_IO);
}
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = bubinga_setup_arch;
ppc_md.setup_io_mappings = bubinga_map_io;
#ifdef CONFIG_GEN_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#endif
#ifdef CONFIG_KGDB
ppc_md.early_serial_map = bubinga_early_serial_map;
#endif
}
Reference in New Issue View Git Blame Copy Permalink