kernel-ark/include/asm-arm26/uaccess.h
Tobias Klauser c5a69d57eb Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:11:19 +01:00

294 lines
11 KiB
C

#ifndef _ASMARM_UACCESS_H
#define _ASMARM_UACCESS_H
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <asm/errno.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
extern int fixup_exception(struct pt_regs *regs);
#define get_ds() (KERNEL_DS)
#define get_fs() (current_thread_info()->addr_limit)
#define segment_eq(a,b) ((a) == (b))
#include <asm/uaccess-asm.h>
#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
/*
* Single-value transfer routines. They automatically use the right
* size if we just have the right pointer type. Note that the functions
* which read from user space (*get_*) need to take care not to leak
* kernel data even if the calling code is buggy and fails to check
* the return value. This means zeroing out the destination variable
* or buffer on error. Normally this is done out of line by the
* fixup code, but there are a few places where it intrudes on the
* main code path. When we only write to user space, there is no
* problem.
*
* The "__xxx" versions of the user access functions do not verify the
* address space - it must have been done previously with a separate
* "access_ok()" call.
*
* The "xxx_error" versions set the third argument to EFAULT if an
* error occurs, and leave it unchanged on success. Note that these
* versions are void (ie, don't return a value as such).
*/
extern int __get_user_1(void *);
extern int __get_user_2(void *);
extern int __get_user_4(void *);
extern int __get_user_8(void *);
extern int __get_user_bad(void);
#define __get_user_x(__r1,__p,__e,__s,__i...) \
__asm__ __volatile__ ("bl __get_user_" #__s \
: "=&r" (__e), "=r" (__r1) \
: "0" (__p) \
: __i)
#define get_user(x,p) \
({ \
register const typeof(*(p)) *__p asm("r0") = (p); \
register typeof(*(p)) __r1 asm("r1"); \
register int __e asm("r0"); \
switch (sizeof(*(p))) { \
case 1: \
__get_user_x(__r1, __p, __e, 1, "lr"); \
break; \
case 2: \
__get_user_x(__r1, __p, __e, 2, "r2", "lr"); \
break; \
case 4: \
__get_user_x(__r1, __p, __e, 4, "lr"); \
break; \
case 8: \
__get_user_x(__r1, __p, __e, 8, "lr"); \
break; \
default: __e = __get_user_bad(); break; \
} \
x = __r1; \
__e; \
})
#define __get_user(x,ptr) \
({ \
long __gu_err = 0; \
__get_user_err((x),(ptr),__gu_err); \
__gu_err; \
})
#define __get_user_error(x,ptr,err) \
({ \
__get_user_err((x),(ptr),err); \
(void) 0; \
})
#define __get_user_err(x,ptr,err) \
do { \
unsigned long __gu_addr = (unsigned long)(ptr); \
unsigned long __gu_val; \
switch (sizeof(*(ptr))) { \
case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \
default: (__gu_val) = __get_user_bad(); \
} \
(x) = (__typeof__(*(ptr)))__gu_val; \
} while (0)
extern int __put_user_1(void *, unsigned int);
extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
extern int __put_user_bad(void);
#define __put_user_x(__r1,__p,__e,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r1") \
"bl __put_user_" #__s \
: "=&r" (__e) \
: "0" (__p), "r" (__r1) \
: "ip", "lr", "cc")
#define put_user(x,p) \
({ \
register const typeof(*(p)) __r1 asm("r1") = (x); \
register const typeof(*(p)) *__p asm("r0") = (p); \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
__put_user_x(__r1, __p, __e, 1); \
break; \
case 2: \
__put_user_x(__r1, __p, __e, 2); \
break; \
case 4: \
__put_user_x(__r1, __p, __e, 4); \
break; \
case 8: \
__put_user_x(__r1, __p, __e, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
#if 0
/********************* OLD METHOD *******************/
#define __put_user_x(__r1,__p,__e,__s,__i...) \
__asm__ __volatile__ ("bl __put_user_" #__s \
: "=&r" (__e) \
: "0" (__p), "r" (__r1) \
: __i)
#define put_user(x,p) \
({ \
register const typeof(*(p)) __r1 asm("r1") = (x); \
register const typeof(*(p)) *__p asm("r0") = (p); \
register int __e asm("r0"); \
switch (sizeof(*(p))) { \
case 1: \
__put_user_x(__r1, __p, __e, 1, "r2", "lr"); \
break; \
case 2: \
__put_user_x(__r1, __p, __e, 2, "r2", "lr"); \
break; \
case 4: \
__put_user_x(__r1, __p, __e, 4, "r2", "lr"); \
break; \
case 8: \
__put_user_x(__r1, __p, __e, 8, "r2", "ip", "lr"); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
/*************************************************/
#endif
#define __put_user(x,ptr) \
({ \
long __pu_err = 0; \
__put_user_err((x),(ptr),__pu_err); \
__pu_err; \
})
#define __put_user_error(x,ptr,err) \
({ \
__put_user_err((x),(ptr),err); \
(void) 0; \
})
#define __put_user_err(x,ptr,err) \
do { \
unsigned long __pu_addr = (unsigned long)(ptr); \
__typeof__(*(ptr)) __pu_val = (x); \
switch (sizeof(*(ptr))) { \
case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \
case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \
case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \
default: __put_user_bad(); \
} \
} while (0)
static __inline__ unsigned long copy_from_user(void *to, const void *from, unsigned long n)
{
if (access_ok(VERIFY_READ, from, n))
__do_copy_from_user(to, from, n);
else /* security hole - plug it */
memzero(to, n);
return n;
}
static __inline__ unsigned long __copy_from_user(void *to, const void *from, unsigned long n)
{
__do_copy_from_user(to, from, n);
return n;
}
static __inline__ unsigned long copy_to_user(void *to, const void *from, unsigned long n)
{
if (access_ok(VERIFY_WRITE, to, n))
__do_copy_to_user(to, from, n);
return n;
}
static __inline__ unsigned long __copy_to_user(void *to, const void *from, unsigned long n)
{
__do_copy_to_user(to, from, n);
return n;
}
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
static __inline__ unsigned long clear_user (void *to, unsigned long n)
{
if (access_ok(VERIFY_WRITE, to, n))
__do_clear_user(to, n);
return n;
}
static __inline__ unsigned long __clear_user (void *to, unsigned long n)
{
__do_clear_user(to, n);
return n;
}
static __inline__ long strncpy_from_user (char *dst, const char *src, long count)
{
long res = -EFAULT;
if (access_ok(VERIFY_READ, src, 1))
__do_strncpy_from_user(dst, src, count, res);
return res;
}
static __inline__ long __strncpy_from_user (char *dst, const char *src, long count)
{
long res;
__do_strncpy_from_user(dst, src, count, res);
return res;
}
#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
static inline long strnlen_user(const char *s, long n)
{
unsigned long res = 0;
if (__addr_ok(s))
__do_strnlen_user(s, n, res);
return res;
}
#endif /* _ASMARM_UACCESS_H */