kernel-ark/include/linux/key.h
David Howells 3e30148c3d [PATCH] Keys: Make request-key create an authorisation key
The attached patch makes the following changes:

 (1) There's a new special key type called ".request_key_auth".

     This is an authorisation key for when one process requests a key and
     another process is started to construct it. This type of key cannot be
     created by the user; nor can it be requested by kernel services.

     Authorisation keys hold two references:

     (a) Each refers to a key being constructed. When the key being
     	 constructed is instantiated the authorisation key is revoked,
     	 rendering it of no further use.

     (b) The "authorising process". This is either:

     	 (i) the process that called request_key(), or:

     	 (ii) if the process that called request_key() itself had an
     	      authorisation key in its session keyring, then the authorising
     	      process referred to by that authorisation key will also be
     	      referred to by the new authorisation key.

	 This means that the process that initiated a chain of key requests
	 will authorise the lot of them, and will, by default, wind up with
	 the keys obtained from them in its keyrings.

 (2) request_key() creates an authorisation key which is then passed to
     /sbin/request-key in as part of a new session keyring.

 (3) When request_key() is searching for a key to hand back to the caller, if
     it comes across an authorisation key in the session keyring of the
     calling process, it will also search the keyrings of the process
     specified therein and it will use the specified process's credentials
     (fsuid, fsgid, groups) to do that rather than the calling process's
     credentials.

     This allows a process started by /sbin/request-key to find keys belonging
     to the authorising process.

 (4) A key can be read, even if the process executing KEYCTL_READ doesn't have
     direct read or search permission if that key is contained within the
     keyrings of a process specified by an authorisation key found within the
     calling process's session keyring, and is searchable using the
     credentials of the authorising process.

     This allows a process started by /sbin/request-key to read keys belonging
     to the authorising process.

 (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or
     KEYCTL_NEGATE will specify a keyring of the authorising process, rather
     than the process doing the instantiation.

 (6) One of the process keyrings can be nominated as the default to which
     request_key() should attach new keys if not otherwise specified. This is
     done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_*
     constants. The current setting can also be read using this call.

 (7) request_key() is partially interruptible. If it is waiting for another
     process to finish constructing a key, it can be interrupted. This permits
     a request-key cycle to be broken without recourse to rebooting.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:19 -07:00

304 lines
9.2 KiB
C

/* key.h: authentication token and access key management
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*
* See Documentation/keys.txt for information on keys/keyrings.
*/
#ifndef _LINUX_KEY_H
#define _LINUX_KEY_H
#include <linux/types.h>
#include <linux/list.h>
#include <linux/rbtree.h>
#include <linux/rcupdate.h>
#include <asm/atomic.h>
#ifdef __KERNEL__
/* key handle serial number */
typedef int32_t key_serial_t;
/* key handle permissions mask */
typedef uint32_t key_perm_t;
struct key;
#ifdef CONFIG_KEYS
#undef KEY_DEBUGGING
#define KEY_USR_VIEW 0x00010000 /* user can view a key's attributes */
#define KEY_USR_READ 0x00020000 /* user can read key payload / view keyring */
#define KEY_USR_WRITE 0x00040000 /* user can update key payload / add link to keyring */
#define KEY_USR_SEARCH 0x00080000 /* user can find a key in search / search a keyring */
#define KEY_USR_LINK 0x00100000 /* user can create a link to a key/keyring */
#define KEY_USR_ALL 0x001f0000
#define KEY_GRP_VIEW 0x00000100 /* group permissions... */
#define KEY_GRP_READ 0x00000200
#define KEY_GRP_WRITE 0x00000400
#define KEY_GRP_SEARCH 0x00000800
#define KEY_GRP_LINK 0x00001000
#define KEY_GRP_ALL 0x00001f00
#define KEY_OTH_VIEW 0x00000001 /* third party permissions... */
#define KEY_OTH_READ 0x00000002
#define KEY_OTH_WRITE 0x00000004
#define KEY_OTH_SEARCH 0x00000008
#define KEY_OTH_LINK 0x00000010
#define KEY_OTH_ALL 0x0000001f
struct seq_file;
struct user_struct;
struct signal_struct;
struct key_type;
struct key_owner;
struct keyring_list;
struct keyring_name;
/*****************************************************************************/
/*
* authentication token / access credential / keyring
* - types of key include:
* - keyrings
* - disk encryption IDs
* - Kerberos TGTs and tickets
*/
struct key {
atomic_t usage; /* number of references */
key_serial_t serial; /* key serial number */
struct rb_node serial_node;
struct key_type *type; /* type of key */
struct rw_semaphore sem; /* change vs change sem */
struct key_user *user; /* owner of this key */
time_t expiry; /* time at which key expires (or 0) */
uid_t uid;
gid_t gid;
key_perm_t perm; /* access permissions */
unsigned short quotalen; /* length added to quota */
unsigned short datalen; /* payload data length
* - may not match RCU dereferenced payload
* - payload should contain own length
*/
#ifdef KEY_DEBUGGING
unsigned magic;
#define KEY_DEBUG_MAGIC 0x18273645u
#define KEY_DEBUG_MAGIC_X 0xf8e9dacbu
#endif
unsigned long flags; /* status flags (change with bitops) */
#define KEY_FLAG_INSTANTIATED 0 /* set if key has been instantiated */
#define KEY_FLAG_DEAD 1 /* set if key type has been deleted */
#define KEY_FLAG_REVOKED 2 /* set if key had been revoked */
#define KEY_FLAG_IN_QUOTA 3 /* set if key consumes quota */
#define KEY_FLAG_USER_CONSTRUCT 4 /* set if key is being constructed in userspace */
#define KEY_FLAG_NEGATIVE 5 /* set if key is negative */
/* the description string
* - this is used to match a key against search criteria
* - this should be a printable string
* - eg: for krb5 AFS, this might be "afs@REDHAT.COM"
*/
char *description;
/* type specific data
* - this is used by the keyring type to index the name
*/
union {
struct list_head link;
} type_data;
/* key data
* - this is used to hold the data actually used in cryptography or
* whatever
*/
union {
unsigned long value;
void *data;
struct keyring_list *subscriptions;
} payload;
};
/*****************************************************************************/
/*
* kernel managed key type definition
*/
struct key_type {
/* name of the type */
const char *name;
/* default payload length for quota precalculation (optional)
* - this can be used instead of calling key_payload_reserve(), that
* function only needs to be called if the real datalen is different
*/
size_t def_datalen;
/* instantiate a key of this type
* - this method should call key_payload_reserve() to determine if the
* user's quota will hold the payload
*/
int (*instantiate)(struct key *key, const void *data, size_t datalen);
/* duplicate a key of this type (optional)
* - the source key will be locked against change
* - the new description will be attached
* - the quota will have been adjusted automatically from
* source->quotalen
*/
int (*duplicate)(struct key *key, const struct key *source);
/* update a key of this type (optional)
* - this method should call key_payload_reserve() to recalculate the
* quota consumption
* - the key must be locked against read when modifying
*/
int (*update)(struct key *key, const void *data, size_t datalen);
/* match a key against a description */
int (*match)(const struct key *key, const void *desc);
/* clear the data from a key (optional) */
void (*destroy)(struct key *key);
/* describe a key */
void (*describe)(const struct key *key, struct seq_file *p);
/* read a key's data (optional)
* - permission checks will be done by the caller
* - the key's semaphore will be readlocked by the caller
* - should return the amount of data that could be read, no matter how
* much is copied into the buffer
* - shouldn't do the copy if the buffer is NULL
*/
long (*read)(const struct key *key, char __user *buffer, size_t buflen);
/* internal fields */
struct list_head link; /* link in types list */
};
extern struct key_type key_type_keyring;
extern int register_key_type(struct key_type *ktype);
extern void unregister_key_type(struct key_type *ktype);
extern struct key *key_alloc(struct key_type *type,
const char *desc,
uid_t uid, gid_t gid, key_perm_t perm,
int not_in_quota);
extern int key_payload_reserve(struct key *key, size_t datalen);
extern int key_instantiate_and_link(struct key *key,
const void *data,
size_t datalen,
struct key *keyring,
struct key *instkey);
extern int key_negate_and_link(struct key *key,
unsigned timeout,
struct key *keyring,
struct key *instkey);
extern void key_revoke(struct key *key);
extern void key_put(struct key *key);
static inline struct key *key_get(struct key *key)
{
if (key)
atomic_inc(&key->usage);
return key;
}
extern struct key *request_key(struct key_type *type,
const char *description,
const char *callout_info);
extern int key_validate(struct key *key);
extern struct key *key_create_or_update(struct key *keyring,
const char *type,
const char *description,
const void *payload,
size_t plen,
int not_in_quota);
extern int key_update(struct key *key,
const void *payload,
size_t plen);
extern int key_link(struct key *keyring,
struct key *key);
extern int key_unlink(struct key *keyring,
struct key *key);
extern struct key *keyring_alloc(const char *description, uid_t uid, gid_t gid,
int not_in_quota, struct key *dest);
extern int keyring_clear(struct key *keyring);
extern struct key *keyring_search(struct key *keyring,
struct key_type *type,
const char *description);
extern int keyring_add_key(struct key *keyring,
struct key *key);
extern struct key *key_lookup(key_serial_t id);
extern void keyring_replace_payload(struct key *key, void *replacement);
#define key_serial(key) ((key) ? (key)->serial : 0)
/*
* the userspace interface
*/
extern struct key root_user_keyring, root_session_keyring;
extern int alloc_uid_keyring(struct user_struct *user);
extern void switch_uid_keyring(struct user_struct *new_user);
extern int copy_keys(unsigned long clone_flags, struct task_struct *tsk);
extern int copy_thread_group_keys(struct task_struct *tsk);
extern void exit_keys(struct task_struct *tsk);
extern void exit_thread_group_keys(struct signal_struct *tg);
extern int suid_keys(struct task_struct *tsk);
extern int exec_keys(struct task_struct *tsk);
extern void key_fsuid_changed(struct task_struct *tsk);
extern void key_fsgid_changed(struct task_struct *tsk);
extern void key_init(void);
#define __install_session_keyring(tsk, keyring) \
({ \
struct key *old_session = tsk->signal->session_keyring; \
tsk->signal->session_keyring = keyring; \
old_session; \
})
#else /* CONFIG_KEYS */
#define key_validate(k) 0
#define key_serial(k) 0
#define key_get(k) ({ NULL; })
#define key_put(k) do { } while(0)
#define alloc_uid_keyring(u) 0
#define switch_uid_keyring(u) do { } while(0)
#define __install_session_keyring(t, k) ({ NULL; })
#define copy_keys(f,t) 0
#define copy_thread_group_keys(t) 0
#define exit_keys(t) do { } while(0)
#define exit_thread_group_keys(tg) do { } while(0)
#define suid_keys(t) do { } while(0)
#define exec_keys(t) do { } while(0)
#define key_fsuid_changed(t) do { } while(0)
#define key_fsgid_changed(t) do { } while(0)
#define key_init() do { } while(0)
#endif /* CONFIG_KEYS */
#endif /* __KERNEL__ */
#endif /* _LINUX_KEY_H */