8f9c60f2e2
sh_mipi uses some clocks, but the method of setup depends on CPU.
Current SuperH (like sh73a0) can control all of these clocks
by CPG (Clock Pulse Generator).
It means we can control it by clock framework only.
But on sh7372, it needs CPG settings AND sh_mipi PHYCTRL::PLLDS,
and only sh7372 has PHYCTRL::PLLDS.
But on current sh_mipi driver, PHYCTRL::PLLDS of sh7372 was
overwrote since the callback timing of clock setting was changed
by c2658b70f0
(fbdev: sh_mipi_dsi: fixup setup timing of sh_mipi_setup()).
To solve this issue, this patch adds extra .phyctrl.
This patch adds detail explanation for unclear mipi settings
and fixup wrong PHYCTRL::PLLDS value for ap4evb (0xb -> 0x6).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
617 lines
15 KiB
C
617 lines
15 KiB
C
/*
|
|
* Renesas SH-mobile MIPI DSI support
|
|
*
|
|
* Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
*
|
|
* This is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/bitmap.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
#include <video/sh_mipi_dsi.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
|
|
#include "sh_mobile_lcdcfb.h"
|
|
|
|
#define SYSCTRL 0x0000
|
|
#define SYSCONF 0x0004
|
|
#define TIMSET 0x0008
|
|
#define RESREQSET0 0x0018
|
|
#define RESREQSET1 0x001c
|
|
#define HSTTOVSET 0x0020
|
|
#define LPRTOVSET 0x0024
|
|
#define TATOVSET 0x0028
|
|
#define PRTOVSET 0x002c
|
|
#define DSICTRL 0x0030
|
|
#define DSIINTE 0x0060
|
|
#define PHYCTRL 0x0070
|
|
|
|
/* relative to linkbase */
|
|
#define DTCTR 0x0000
|
|
#define VMCTR1 0x0020
|
|
#define VMCTR2 0x0024
|
|
#define VMLEN1 0x0028
|
|
#define VMLEN2 0x002c
|
|
#define CMTSRTREQ 0x0070
|
|
#define CMTSRTCTR 0x00d0
|
|
|
|
/* E.g., sh7372 has 2 MIPI-DSIs - one for each LCDC */
|
|
#define MAX_SH_MIPI_DSI 2
|
|
|
|
struct sh_mipi {
|
|
struct sh_mobile_lcdc_entity entity;
|
|
|
|
void __iomem *base;
|
|
void __iomem *linkbase;
|
|
struct clk *dsit_clk;
|
|
struct platform_device *pdev;
|
|
};
|
|
|
|
#define to_sh_mipi(e) container_of(e, struct sh_mipi, entity)
|
|
|
|
static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI];
|
|
|
|
/* Protect the above array */
|
|
static DEFINE_MUTEX(array_lock);
|
|
|
|
static struct sh_mipi *sh_mipi_by_handle(int handle)
|
|
{
|
|
if (handle >= ARRAY_SIZE(mipi_dsi) || handle < 0)
|
|
return NULL;
|
|
|
|
return mipi_dsi[handle];
|
|
}
|
|
|
|
static int sh_mipi_send_short(struct sh_mipi *mipi, u8 dsi_cmd,
|
|
u8 cmd, u8 param)
|
|
{
|
|
u32 data = (dsi_cmd << 24) | (cmd << 16) | (param << 8);
|
|
int cnt = 100;
|
|
|
|
/* transmit a short packet to LCD panel */
|
|
iowrite32(1 | data, mipi->linkbase + CMTSRTCTR);
|
|
iowrite32(1, mipi->linkbase + CMTSRTREQ);
|
|
|
|
while ((ioread32(mipi->linkbase + CMTSRTREQ) & 1) && --cnt)
|
|
udelay(1);
|
|
|
|
return cnt ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
#define LCD_CHAN2MIPI(c) ((c) < LCDC_CHAN_MAINLCD || (c) > LCDC_CHAN_SUBLCD ? \
|
|
-EINVAL : (c) - 1)
|
|
|
|
static int sh_mipi_dcs(int handle, u8 cmd)
|
|
{
|
|
struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
|
|
if (!mipi)
|
|
return -ENODEV;
|
|
return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE, cmd, 0);
|
|
}
|
|
|
|
static int sh_mipi_dcs_param(int handle, u8 cmd, u8 param)
|
|
{
|
|
struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
|
|
if (!mipi)
|
|
return -ENODEV;
|
|
return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE_PARAM, cmd,
|
|
param);
|
|
}
|
|
|
|
static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable)
|
|
{
|
|
/*
|
|
* enable LCDC data tx, transition to LPS after completion of each HS
|
|
* packet
|
|
*/
|
|
iowrite32(0x00000002 | enable, mipi->linkbase + DTCTR);
|
|
}
|
|
|
|
static void sh_mipi_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct sh_mipi *mipi = to_sh_mipi(platform_get_drvdata(pdev));
|
|
|
|
sh_mipi_dsi_enable(mipi, false);
|
|
}
|
|
|
|
static int __init sh_mipi_setup(struct sh_mipi *mipi,
|
|
struct sh_mipi_dsi_info *pdata)
|
|
{
|
|
void __iomem *base = mipi->base;
|
|
struct sh_mobile_lcdc_chan_cfg *ch = pdata->lcd_chan;
|
|
u32 pctype, datatype, pixfmt, linelength, vmctr2;
|
|
u32 tmp, top, bottom, delay, div;
|
|
bool yuv;
|
|
int bpp;
|
|
|
|
/*
|
|
* Select data format. MIPI DSI is not hot-pluggable, so, we just use
|
|
* the default videomode. If this ever becomes a problem, We'll have to
|
|
* move this to mipi_display_on() above and use info->var.xres
|
|
*/
|
|
switch (pdata->data_format) {
|
|
case MIPI_RGB888:
|
|
pctype = 0;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
|
|
linelength = ch->lcd_modes[0].xres * 3;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_RGB565:
|
|
pctype = 1;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
|
|
linelength = ch->lcd_modes[0].xres * 2;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_RGB666_LP:
|
|
pctype = 2;
|
|
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
|
|
linelength = ch->lcd_modes[0].xres * 3;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_RGB666:
|
|
pctype = 3;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
|
|
linelength = (ch->lcd_modes[0].xres * 18 + 7) / 8;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_BGR888:
|
|
pctype = 8;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
|
|
linelength = ch->lcd_modes[0].xres * 3;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_BGR565:
|
|
pctype = 9;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
|
|
linelength = ch->lcd_modes[0].xres * 2;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_BGR666_LP:
|
|
pctype = 0xa;
|
|
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
|
|
linelength = ch->lcd_modes[0].xres * 3;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_BGR666:
|
|
pctype = 0xb;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
|
|
linelength = (ch->lcd_modes[0].xres * 18 + 7) / 8;
|
|
yuv = false;
|
|
break;
|
|
case MIPI_YUYV:
|
|
pctype = 4;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
|
|
linelength = ch->lcd_modes[0].xres * 2;
|
|
yuv = true;
|
|
break;
|
|
case MIPI_UYVY:
|
|
pctype = 5;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
|
|
linelength = ch->lcd_modes[0].xres * 2;
|
|
yuv = true;
|
|
break;
|
|
case MIPI_YUV420_L:
|
|
pctype = 6;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
|
|
linelength = (ch->lcd_modes[0].xres * 12 + 7) / 8;
|
|
yuv = true;
|
|
break;
|
|
case MIPI_YUV420:
|
|
pctype = 7;
|
|
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
|
|
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
|
|
/* Length of U/V line */
|
|
linelength = (ch->lcd_modes[0].xres + 1) / 2;
|
|
yuv = true;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((yuv && ch->interface_type != YUV422) ||
|
|
(!yuv && ch->interface_type != RGB24))
|
|
return -EINVAL;
|
|
|
|
if (!pdata->lane)
|
|
return -EINVAL;
|
|
|
|
/* reset DSI link */
|
|
iowrite32(0x00000001, base + SYSCTRL);
|
|
/* Hold reset for 100 cycles of the slowest of bus, HS byte and LP clock */
|
|
udelay(50);
|
|
iowrite32(0x00000000, base + SYSCTRL);
|
|
|
|
/* setup DSI link */
|
|
|
|
/*
|
|
* T_wakeup = 0x7000
|
|
* T_hs-trail = 3
|
|
* T_hs-prepare = 3
|
|
* T_clk-trail = 3
|
|
* T_clk-prepare = 2
|
|
*/
|
|
iowrite32(0x70003332, base + TIMSET);
|
|
/* no responses requested */
|
|
iowrite32(0x00000000, base + RESREQSET0);
|
|
/* request response to packets of type 0x28 */
|
|
iowrite32(0x00000100, base + RESREQSET1);
|
|
/* High-speed transmission timeout, default 0xffffffff */
|
|
iowrite32(0x0fffffff, base + HSTTOVSET);
|
|
/* LP reception timeout, default 0xffffffff */
|
|
iowrite32(0x0fffffff, base + LPRTOVSET);
|
|
/* Turn-around timeout, default 0xffffffff */
|
|
iowrite32(0x0fffffff, base + TATOVSET);
|
|
/* Peripheral reset timeout, default 0xffffffff */
|
|
iowrite32(0x0fffffff, base + PRTOVSET);
|
|
/* Interrupts not used, disable all */
|
|
iowrite32(0, base + DSIINTE);
|
|
/* DSI-Tx bias on */
|
|
iowrite32(0x00000001, base + PHYCTRL);
|
|
udelay(200);
|
|
/* Deassert resets, power on */
|
|
iowrite32(0x03070001 | pdata->phyctrl, base + PHYCTRL);
|
|
|
|
/*
|
|
* Default = ULPS enable |
|
|
* Contention detection enabled |
|
|
* EoT packet transmission enable |
|
|
* CRC check enable |
|
|
* ECC check enable
|
|
*/
|
|
bitmap_fill((unsigned long *)&tmp, pdata->lane);
|
|
tmp |= 0x00003700;
|
|
iowrite32(tmp, base + SYSCONF);
|
|
|
|
/* setup l-bridge */
|
|
|
|
/*
|
|
* Enable transmission of all packets,
|
|
* transmit LPS after each HS packet completion
|
|
*/
|
|
iowrite32(0x00000006, mipi->linkbase + DTCTR);
|
|
/* VSYNC width = 2 (<< 17) */
|
|
iowrite32((ch->lcd_modes[0].vsync_len << pdata->vsynw_offset) |
|
|
(pdata->clksrc << 16) | (pctype << 12) | datatype,
|
|
mipi->linkbase + VMCTR1);
|
|
|
|
/*
|
|
* Non-burst mode with sync pulses: VSE and HSE are output,
|
|
* HSA period allowed, no commands in LP
|
|
*/
|
|
vmctr2 = 0;
|
|
if (pdata->flags & SH_MIPI_DSI_VSEE)
|
|
vmctr2 |= 1 << 23;
|
|
if (pdata->flags & SH_MIPI_DSI_HSEE)
|
|
vmctr2 |= 1 << 22;
|
|
if (pdata->flags & SH_MIPI_DSI_HSAE)
|
|
vmctr2 |= 1 << 21;
|
|
if (pdata->flags & SH_MIPI_DSI_BL2E)
|
|
vmctr2 |= 1 << 17;
|
|
if (pdata->flags & SH_MIPI_DSI_HSABM)
|
|
vmctr2 |= 1 << 5;
|
|
if (pdata->flags & SH_MIPI_DSI_HBPBM)
|
|
vmctr2 |= 1 << 4;
|
|
if (pdata->flags & SH_MIPI_DSI_HFPBM)
|
|
vmctr2 |= 1 << 3;
|
|
iowrite32(vmctr2, mipi->linkbase + VMCTR2);
|
|
|
|
/*
|
|
* VMLEN1 = RGBLEN | HSALEN
|
|
*
|
|
* see
|
|
* Video mode - Blanking Packet setting
|
|
*/
|
|
top = linelength << 16; /* RGBLEN */
|
|
bottom = 0x00000001;
|
|
if (pdata->flags & SH_MIPI_DSI_HSABM) /* HSALEN */
|
|
bottom = (pdata->lane * ch->lcd_modes[0].hsync_len) - 10;
|
|
iowrite32(top | bottom , mipi->linkbase + VMLEN1);
|
|
|
|
/*
|
|
* VMLEN2 = HBPLEN | HFPLEN
|
|
*
|
|
* see
|
|
* Video mode - Blanking Packet setting
|
|
*/
|
|
top = 0x00010000;
|
|
bottom = 0x00000001;
|
|
delay = 0;
|
|
|
|
div = 1; /* HSbyteCLK is calculation base
|
|
* HS4divCLK = HSbyteCLK/2
|
|
* HS6divCLK is not supported for now */
|
|
if (pdata->flags & SH_MIPI_DSI_HS4divCLK)
|
|
div = 2;
|
|
|
|
if (pdata->flags & SH_MIPI_DSI_HFPBM) { /* HBPLEN */
|
|
top = ch->lcd_modes[0].hsync_len + ch->lcd_modes[0].left_margin;
|
|
top = ((pdata->lane * top / div) - 10) << 16;
|
|
}
|
|
if (pdata->flags & SH_MIPI_DSI_HBPBM) { /* HFPLEN */
|
|
bottom = ch->lcd_modes[0].right_margin;
|
|
bottom = (pdata->lane * bottom / div) - 12;
|
|
}
|
|
|
|
bpp = linelength / ch->lcd_modes[0].xres; /* byte / pixel */
|
|
if ((pdata->lane / div) > bpp) {
|
|
tmp = ch->lcd_modes[0].xres / bpp; /* output cycle */
|
|
tmp = ch->lcd_modes[0].xres - tmp; /* (input - output) cycle */
|
|
delay = (pdata->lane * tmp);
|
|
}
|
|
|
|
iowrite32(top | (bottom + delay) , mipi->linkbase + VMLEN2);
|
|
|
|
msleep(5);
|
|
|
|
/* setup LCD panel */
|
|
|
|
/* cf. drivers/video/omap/lcd_mipid.c */
|
|
sh_mipi_dcs(ch->chan, MIPI_DCS_EXIT_SLEEP_MODE);
|
|
msleep(120);
|
|
/*
|
|
* [7] - Page Address Mode
|
|
* [6] - Column Address Mode
|
|
* [5] - Page / Column Address Mode
|
|
* [4] - Display Device Line Refresh Order
|
|
* [3] - RGB/BGR Order
|
|
* [2] - Display Data Latch Data Order
|
|
* [1] - Flip Horizontal
|
|
* [0] - Flip Vertical
|
|
*/
|
|
sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
|
|
/* cf. set_data_lines() */
|
|
sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_PIXEL_FORMAT,
|
|
pixfmt << 4);
|
|
sh_mipi_dcs(ch->chan, MIPI_DCS_SET_DISPLAY_ON);
|
|
|
|
/* Enable timeout counters */
|
|
iowrite32(0x00000f00, base + DSICTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mipi_display_on(struct sh_mobile_lcdc_entity *entity)
|
|
{
|
|
struct sh_mipi *mipi = to_sh_mipi(entity);
|
|
struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(&mipi->pdev->dev);
|
|
|
|
ret = pdata->set_dot_clock(mipi->pdev, mipi->base, 1);
|
|
if (ret < 0)
|
|
goto mipi_display_on_fail1;
|
|
|
|
ret = sh_mipi_setup(mipi, pdata);
|
|
if (ret < 0)
|
|
goto mipi_display_on_fail2;
|
|
|
|
sh_mipi_dsi_enable(mipi, true);
|
|
|
|
return SH_MOBILE_LCDC_DISPLAY_CONNECTED;
|
|
|
|
mipi_display_on_fail1:
|
|
pm_runtime_put_sync(&mipi->pdev->dev);
|
|
mipi_display_on_fail2:
|
|
pdata->set_dot_clock(mipi->pdev, mipi->base, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mipi_display_off(struct sh_mobile_lcdc_entity *entity)
|
|
{
|
|
struct sh_mipi *mipi = to_sh_mipi(entity);
|
|
struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
|
|
|
|
sh_mipi_dsi_enable(mipi, false);
|
|
|
|
pdata->set_dot_clock(mipi->pdev, mipi->base, 0);
|
|
|
|
pm_runtime_put_sync(&mipi->pdev->dev);
|
|
}
|
|
|
|
static const struct sh_mobile_lcdc_entity_ops mipi_ops = {
|
|
.display_on = mipi_display_on,
|
|
.display_off = mipi_display_off,
|
|
};
|
|
|
|
static int __init sh_mipi_probe(struct platform_device *pdev)
|
|
{
|
|
struct sh_mipi *mipi;
|
|
struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
unsigned long rate, f_current;
|
|
int idx = pdev->id, ret;
|
|
|
|
if (!res || !res2 || idx >= ARRAY_SIZE(mipi_dsi) || !pdata)
|
|
return -ENODEV;
|
|
|
|
if (!pdata->set_dot_clock)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&array_lock);
|
|
if (idx < 0)
|
|
for (idx = 0; idx < ARRAY_SIZE(mipi_dsi) && mipi_dsi[idx]; idx++)
|
|
;
|
|
|
|
if (idx == ARRAY_SIZE(mipi_dsi)) {
|
|
ret = -EBUSY;
|
|
goto efindslot;
|
|
}
|
|
|
|
mipi = kzalloc(sizeof(*mipi), GFP_KERNEL);
|
|
if (!mipi) {
|
|
ret = -ENOMEM;
|
|
goto ealloc;
|
|
}
|
|
|
|
mipi->entity.owner = THIS_MODULE;
|
|
mipi->entity.ops = &mipi_ops;
|
|
|
|
if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
|
|
dev_err(&pdev->dev, "MIPI register region already claimed\n");
|
|
ret = -EBUSY;
|
|
goto ereqreg;
|
|
}
|
|
|
|
mipi->base = ioremap(res->start, resource_size(res));
|
|
if (!mipi->base) {
|
|
ret = -ENOMEM;
|
|
goto emap;
|
|
}
|
|
|
|
if (!request_mem_region(res2->start, resource_size(res2), pdev->name)) {
|
|
dev_err(&pdev->dev, "MIPI register region 2 already claimed\n");
|
|
ret = -EBUSY;
|
|
goto ereqreg2;
|
|
}
|
|
|
|
mipi->linkbase = ioremap(res2->start, resource_size(res2));
|
|
if (!mipi->linkbase) {
|
|
ret = -ENOMEM;
|
|
goto emap2;
|
|
}
|
|
|
|
mipi->pdev = pdev;
|
|
|
|
mipi->dsit_clk = clk_get(&pdev->dev, "dsit_clk");
|
|
if (IS_ERR(mipi->dsit_clk)) {
|
|
ret = PTR_ERR(mipi->dsit_clk);
|
|
goto eclktget;
|
|
}
|
|
|
|
f_current = clk_get_rate(mipi->dsit_clk);
|
|
/* 80MHz required by the datasheet */
|
|
rate = clk_round_rate(mipi->dsit_clk, 80000000);
|
|
if (rate > 0 && rate != f_current)
|
|
ret = clk_set_rate(mipi->dsit_clk, rate);
|
|
else
|
|
ret = rate;
|
|
if (ret < 0)
|
|
goto esettrate;
|
|
|
|
dev_dbg(&pdev->dev, "DSI-T clk %lu -> %lu\n", f_current, rate);
|
|
|
|
ret = clk_enable(mipi->dsit_clk);
|
|
if (ret < 0)
|
|
goto eclkton;
|
|
|
|
mipi_dsi[idx] = mipi;
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_resume(&pdev->dev);
|
|
|
|
mutex_unlock(&array_lock);
|
|
platform_set_drvdata(pdev, &mipi->entity);
|
|
|
|
return 0;
|
|
|
|
eclkton:
|
|
esettrate:
|
|
clk_put(mipi->dsit_clk);
|
|
eclktget:
|
|
iounmap(mipi->linkbase);
|
|
emap2:
|
|
release_mem_region(res2->start, resource_size(res2));
|
|
ereqreg2:
|
|
iounmap(mipi->base);
|
|
emap:
|
|
release_mem_region(res->start, resource_size(res));
|
|
ereqreg:
|
|
kfree(mipi);
|
|
ealloc:
|
|
efindslot:
|
|
mutex_unlock(&array_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __exit sh_mipi_remove(struct platform_device *pdev)
|
|
{
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
struct sh_mipi *mipi = to_sh_mipi(platform_get_drvdata(pdev));
|
|
int i, ret;
|
|
|
|
mutex_lock(&array_lock);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mipi_dsi) && mipi_dsi[i] != mipi; i++)
|
|
;
|
|
|
|
if (i == ARRAY_SIZE(mipi_dsi)) {
|
|
ret = -EINVAL;
|
|
} else {
|
|
ret = 0;
|
|
mipi_dsi[i] = NULL;
|
|
}
|
|
|
|
mutex_unlock(&array_lock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
clk_disable(mipi->dsit_clk);
|
|
clk_put(mipi->dsit_clk);
|
|
|
|
iounmap(mipi->linkbase);
|
|
if (res2)
|
|
release_mem_region(res2->start, resource_size(res2));
|
|
iounmap(mipi->base);
|
|
if (res)
|
|
release_mem_region(res->start, resource_size(res));
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(mipi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sh_mipi_driver = {
|
|
.remove = __exit_p(sh_mipi_remove),
|
|
.shutdown = sh_mipi_shutdown,
|
|
.driver = {
|
|
.name = "sh-mipi-dsi",
|
|
},
|
|
};
|
|
|
|
static int __init sh_mipi_init(void)
|
|
{
|
|
return platform_driver_probe(&sh_mipi_driver, sh_mipi_probe);
|
|
}
|
|
module_init(sh_mipi_init);
|
|
|
|
static void __exit sh_mipi_exit(void)
|
|
{
|
|
platform_driver_unregister(&sh_mipi_driver);
|
|
}
|
|
module_exit(sh_mipi_exit);
|
|
|
|
MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
|
|
MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver");
|
|
MODULE_LICENSE("GPL v2");
|